KENWOOD KVT 719DVD User Manual

MONITOR WITH DVD RECEIVER

KVT-719DVD

KVT-739DVD

INSTRUCTION MANUAL

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best

performance from your new DVD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the

warranty card, and in the space provided below. Refer to the model and serial numbers

whenever you call upon your Kenwood dealer for information or service on the product.

Model KVT-719DVD/KVT-739DVD Serial number

US Residence Only

www.Kenwoodusa.com

HD Radio Control

Character Entry

How To Use the Character Entry screen

Functions When Displaying the Easy

Control Panel

Functions While Displaying the Control

Screen

Seek Mode

Auto Memory

Manual Memory

Screen Control

Hands Free Unit Control

Control Screen Function

When Called

When Dialing

Quick Dialing

Calling by Phone Book

Redialing

Setting up the Hands-Free Phone

Selecting a Hands-Free Phone

Deleting the Hands-Free Phone

Source Select

Displaying the Control Screen

Muting Audio Volume upon Reception

of Phone call

Muting Audio Volume upon Reception of

Phone Call

Audio Control

Audio Control menu

Audio Control

Equalizer Control

Tone setup

Setup Menu

Audio Setup

Crossover Network Setup

DVD Setup

Language Setup

Parental Level Setup

DivX Setup

Software Information

iPod Setup

System Setup

AV Interface Setup

User Interface

Entering background

Background Delete

Background Select

Touch panel Adjustment

Clock Setup

Zone Control

Remote Controller

Battery installation

Remote Controller mode switch

Common operations (AUD mode)

DVD/VCD/CD/Audio files (DVD mode)

TV (TV mode)

Radio (AUD mode)

Monitor Setup

Security Code Setup

Deactivating Security Code

SAT ESN Watch Setup

Setup Memory

Help? Troubleshooting

Help? Error

DVD Language Codes

Specifications

English

How to read this manual

This manual uses illustrations to explain its

operations.

Seek mode

The displays and panels shown in this manual

are examples used to provide clear explanations

of the operations.

Sets a station selection.

For this reason, they may be different from the

actual displays or panels used, or some display

patterns may be different.

The mode is switched in following order each

time you touch the button.

Display

Setting

"AUTO1"

Tunes in a station with good reception

automatically.

"AUTO2"

"MANU"

Tunes in stations in memory one after another.

Switches to the next frequency manually.

Manual Memory

Stores the current receiving station in memory.

Select a station you wish to store in

memory

Store in memory

Next page ꢀ

The above operation example with the mark

differs from the actual operation.

KVT-719DVD/KVT-739DVD

English

Safety precautions

Do Not Load 3-in. CDs in the CD slot

2WARNING

If you try to load a 3 in. CD with its adapter into the

unit, the adapter might separate from the CD and

damage the unit.

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

• Do not watch or fix your eyes on the unit’s display

when you are driving for any extended period.

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting

and wiring work to professionals.

About CD players/disc changers connected

to this unit

Kenwood disc changers/ CD players released in 1998

or later can be connected to this unit.

Refer to the catalog or consult your Kenwood dealer

for connectable models of disc changers/ CD players.

Note that any Kenwood disc changers/ CD players

released in 1997 or earlier and disc changers made by

other makers cannot be connected to this unit.

Connecting unsupported disc changers/CD players to

this unit may result in damage.

Set the "O-N" Switch to the "N" position for the

applicable Kenwood disc changers/ CD players.

The functions you can use and the information

that can be displayed may differ depending on the

models being connected.

2CAUTION

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not place the faceplate (and the faceplate case)

in areas exposed to direct sunlight, excessive heat

or humidity. Also avoid places with too much dust

or the possibility of water splashing.

•

You can damage both your unit and the CD changer if you

connect them incorrectly.

Lens Fogging

• To prevent deterioration, do not touch the terminals

of the unit or faceplate with your fingers.

• Do not subject the faceplate to excessive shock, as

it is a piece of precision equipment.

• When replacing a fuse, only use a new fuse with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• Do not apply excessive force to the open faceplate

or place objects on it. Doing so will cause damage

or breakdown.

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condensation on the lens may not allow CDs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

KVT-719DVD/KVT-739DVD

Notes

• If you experience problems during installation,

consult your Kenwood dealer.

•

Applying spray cleaner directly to the unit may affect its

• When you purchase optional accessories, check

with your Kenwood dealer to make sure that they

work with your model and in your area.

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

• We recommend the use of <Security Code Setup>

(page 80) to prevent theft.

• The characters conforming to ISO 8859-1 character

set can be displayed.

• The RDS or RBDS feature won’t work where the

service is not supported by any broadcasting

station.

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

TV tuner that can be connected to this unit

•

KTC-V500N

KTC-V300N

Navigation units that can be connected to

this unit

•

KNA-G510

KNA-DV4100

KNA-DV3100

KNA-DV2100

About iPod that can be connected to this

unit

You can control an iPod from this unit by connecting

an iPod (commercial product) with Dock connector

using an optional accessory iPod connection cable

(KCA-iP300V).

How to reset your unit

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed.

• Remove the USB device before pressing the Reset

button. Pressing the Reset button with the USB

device installed can damage the data contained in

the USB device. For how to remove the USB device,

refer to <Playing a USB device> (page 15).

• Press the reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

The following iPods can be controlled from this unit.

Controllable iPod

iPod nano

Software version

iPod nano software 1.2

iPod nano software 1.1.1

iPod software 1.2

iPod nano second generation

iPod with video

You must update your iPod software if its version is

less than the above.

The iPod software version is displayed in the "Version"

field by pressing the iPod MENU button and then

selecting "Set", "Information". The latest iPod software

updater can be downloaded from the Apple

Computer web site.

Reset button

The character set supported by this unit is ISO08859-

Characters that cannot be displayed correctly appear

as "*".

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

By connecting your iPod to this unit with an optional

accessory iPod connection cable (KCA-iP300V), you

can supply power to your iPod as well as charge it

while playing music. However, the power of this unit

must be on.

English

Notes

Handling CDs

List of playable discs

• Do not touch the recording surface of the CD.

Disc

types

DVD

Standard

Support

Remark

• Do not stick tape etc. on the CD, or use a CD with

tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

• When removing CDs from this unit, pull them out

horizontally.

• If the CD center hole or outside rim has burrs,

use the CD only after removing the burrs with a

ballpoint pen etc.

‡

DVD Video

DVD Audio

DVD-R

‡

MP3/WMA/AAC/JPEG/

MPEG/DivX Playback

Multi-border/Multisession/

(Playback depends on

authoring conditions)

Compatible with 8-cm (3

inch) discs

‡

DVD-RW

DVD+R

DVD+RW

‡

DVD-R DL (Double layer)

DVD+R DL (Double layer)

DVD-RAM

Only video format

CDs that cannot be used

• CDs that are not round cannot be used.

‡

Music CD

CD-TEXT/8-cm (3 inch)

discs supported.

MP3/WMA/AAC/JPEG/

DivX playback

Multisession supported

Packet write not supported.

‡

CD-ROM

CD-R

CD-RW

‡

DTS-CD

Video CD (VCD)

Super video CD

Photo CD

• CDs with coloring on the recording surface or CDs

that are dirty cannot be used.

• This unit can only play the CDs with

CD-EXTRA

Only music CD session can

be played.

Sound quality of normal

CD music

This unit may not correctly play discs which do not

have the mark.

• You cannot play a CD-R or CD-RW that has not

been finalized. (For the finalization process refer to

your CD-R/CD-RW writing software, and your CD-

R/CD-RW recorder instruction manual.)

HDCD

CCCD

Others

Dualdisc

Super audio CD

Only CD layer can be

played.

‡ : Playback is possible.

% : Playback is partly possible.

× : Playback is impossible.

⁄

•

DivX file must have the extension ".divx", ".div", or ".avi".

When buying DRM enabled contents, check the

Registration Code in the <DivX Setup> (page 70).

Registration Code changes each time a file with the

displayed Registration Code is played to protect against

copying.

KVT-719DVD/KVT-739DVD

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the

following map.

DVD disc marks

Operation regulatory marks

With this DVD, some functions of this unit such as the

play function may be restricted depending on the

location where the DVD is playing. In this case, the

following marks will appear on the screen. For more

information, refer to the disc manual.

Symbol

Description

Indicates a region number. The discs with this mark can

be played with any DVD player.

ALL

Indicates the number of audio languages recorded. Up

to 8 languages can be recorded in a movie. You can

select a favorite language.

Prohibition Mark

禁止マーク

Indicates the number of subtitled languages recorded.

Up to 32 languages can be recorded.

Discs with limited period of use

Do not leave discs with a limited period of use in this

unit. If you load an already expired disc, you may not

be able to remove it from this unit.

If a DVD disc has scenes shot from multiple angles, you

can select a favorite angle.

Indicates the type of screen for the image. The left mark

indicates that a wide image picture (16:9) is displayed

on a standard TV set screen (4:3) with a black band at

both the top and bottom of the screen (letter box).

16:9 LB

English

Notes

•

Playing order of the Audio file

In the example of folder/file tree shown below, the

files are played in the order from ① to ⑩.

About Audio files

•

Playable Audio file

AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)

FFoollddeerr

AAuuddiioofﬁile

(ꢂ)

⁄

vꢀ

ꢁ

•

If music of normal CD and other playback systems are

recorded in the same disc, only the playback system

recorded at the first setout is played.

Playable AAC file

ꢃ

vꢆ

vꢇ

•

ꢅ

".m4a" file encoded by AAC-LC format.

Transfer bit rate: 16 – 320 kbps

Sampling frequency: 16 – 48 kHz

vꢄ

ꢈ

vꢉ

•

Playable MP3 file

MPEG 1/2 Audio Layer 3 file

Transfer bit rate: 8 – 320 kbps

Sampling frequency: 8 – 48 kHz

The Audio file plays in the order which is written by CD

writing software. You may be able to set the playing order

by writing the play sequence numbers such as "01" to "99"

at the beginning of the file name.

Playable WMA file

The file in accordance with Windows Media Audio

(Except for the file for Windows Media Player 9 or

after which applies the new functions)

Audio files are played in the order the files are written. You

can specify the order of playback by numbering files in a

folder and writing them by folder. (USB device)

Transfer bit rate: 48 – 192 kbps

Sampling frequency: 32, 44.1, 48 kHz

Playable disc media

CD-R/RW/ROM, DVD R/RW

Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

The maximum number of characters for display

(CD-R/RW/DVD R/RW)

⁄

•

In this manual, the word "USB device" is used for flash

memories and digital audio players which work as mass-

storage-class devices.

•

"iPod" in this manual refers to iPod connected with KCA-

iP300V (Optional accessory). iPod connected with KCA-

iP300V can be controlled from this unit. iPods that can be

connected to KCA-iP300V are iPod nano and iPod with

video. If you connect an iPod with commercially available

USB cable, it is treated as a mass storage class device.

For the supported formats and types of USB device, refer to

www.kenwood.com/usb/.

Attach the correct extension for the Audio file (AAC: ".M4A",

MP3: ".MP3", WMA: ".WMA")

Do not attach the extensions to files other than the Audio

file. If the extension is attached, the file, which is not the

Audio file, will play and outputs a loud noise, causing

damage to the speaker.

The files with copy protection cannot be played.

The unit may not be compatible with upgrade of

compression format standard and additional specifications.

CD-RW discs which are quick formatted by the writing

software cannot be used.

When recording to the maximum CD-R/RW media capacity

at once, the writing software is set to "Disc at once".

File/Folder name is the number of the characters including

the extensions.

This unit can display the following versions of MP3 ID3 tag:

version 1.0/ 1.1/ 2.2 (USB device)/ 2.3 (USB device)

AAC ID3 Tag cannot be displayed.

Contact the sales agent as to whether your USB device

conforms to the USB mass storage class specs.

File/Folder name: 128 characters

MP3 ID3 Tag version 1.x: 30 characters

•

Limitation of structure for the file and the

folder (CD-R/RW/DVD R/RW/USB device)

•

Maximum number of directory levels: 8

Maximum number of folders: 254

Maximum number of files per folder: 255

Maximum number of files per playlist: 7000 (USB

device)

•

Playable USB device

•

USB mass storage class, iPod with KCA-iP300V

Playable USB device file system

FAT16, FAT32

•

About the Connection of the USB device

If an extension cable is needed for USB device

connection, usage of the CA-U1EX (option) is

recommended.

Normal playback is not guaranteed when a cable

other than the USB compatible cable is used.

Connecting a cable whose total length is longer

than 5 m can result in abnormal playback.

Although the audio files are complied with the

standards listed above, the play maybe impossible

depending on the types or conditions of media or

device.

•

KVT-719DVD/KVT-739DVD

•

Using an unsupported USB device can result in abnormal

playback or display of the audio file.

Even if you use the USB device conforming to the above

specs, audio files cannot be played normally depending on

the type or condition of the USB device.

Do not leave the USB device in the vehicle for a long time.

It can deform or damage due to direct sunlight, high

temperature, etc.

About USB device

• Install the USB device in the place where it will not

prevent you from driving your vehicle properly.

• You cannot connect a USB device via a USB hub.

• Take backups of the audio files used with this unit.

The files can be erased depending on the operating

conditions of the USB device.

We shall have no compensation for any damage

arising out of erasure of the stored data.

• No USB device comes with this unit. You need to

purchase a commercially available USB device.

About Video files

Acceptable video files

•

Format: MPEG1, MPEG2, DivX

Picture size:

MPEG1: 320 × 240, 352 × 240

MPEG2: 640 × 480, 704 × 480

DivX: 352 x 240, 352 x 288, 720 x 450, 720 x 576

Audio format:

MPEG1/2: MPEG Audio Layer 2

DivX: MP3, Dolby Digital

Audio sampling frequencies: 32/ 44.1/ 48 kHz

Use of "DualDisc"

When playing a "DualDisc" on this unit, the surface

of the disc that is not played may be scratched

while the disc is inserted or ejected. Since the music

CD surface does not conform to the CD standard,

playback may be impossible.

•

(A "DualDisc" is a disc with one surface containing

DVD standard signals and the other surface

containing music CD signals.)

•

Audio bit rate: 32–384 kbps (Only constant bit

rates)

Extensions

About DivX

Video files must have one of the following extensions:

mpg, mpeg, mpe, m1v, m2v

Disc formats, file and folder names and playing order

are the same as those for audio files. Refer to <About

Audio files> (page 10).

DivX is a popular media technology created by DivX,

Inc. DivX media Files contain highly compressed

video with high visual quality that maintains a

relatively small file size. DivX files can also include

advanced media features like menus, subtitles, and

alternate audio tracks. Many DivX media files are

available for download online, and you can create

your own using your personal content and easy-to-

use tools from DivX.com.

About Picture files

Acceptable picture files

•

Format: JPEG

Baseline format:

Up to a maximum of 8192(W) × 7680(H) pixels

Progressive format:

Up to a maximum of 1600(W) × 1200(H) pixels

About DivX Certified

DivX Certified products are officially tested by the

creators of DivX and guaranteed to play all versions

of DivX video, including DivX 6. Certified products

qualify for one of several DivX Profiles that designate

the type of video the product supports, from

•

⁄

•

compact portable video to high-definition video.

Enlarges and reduces images up to the size shown above

to fit to the screen.

•

The picture files with information attached (such as Exif)

may not be displayed or operated (e.g.: rotation display)

properly.

Extensions

Picture files must have one of the following

extensions:

jpg, jpeg, jpe

Acceptable discs, disc formats, file and folder names

and playing order are the same as those for audio

files. Refer to <About Audio files> (page 10).

English

Basic Operations

Common operation

When the monitor is open

When the monitor is closed

B F G

Open/Close the monitor

Press to open or close the monitor panel.

• Do not touch the moving components when you are opening or closing the monitor. If you touch the moving

components, you may be hurt or the equipment may be damaged.

• Do not try to open or close the monitor by hand.

⁄

• You can automatically open or close the monitor when you turn on or off the ignition key (page 78).

• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement

is canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also

canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] button again.

KVT-719DVD/KVT-739DVD

Turns power ON/OFF

Adjusts the volume

Press the button to turn on the power.

When the button is pressed and held down for

1 second or more, the power is turned off.

Attenuates the volume

Press it again to cancel muting.

Playing a disc

When you load a disc into disc loading slot , the disc starts playing.

If a menu appears, when playing a video disc, select the desired item.

⁄

• See <List of playable discs> (page 8) for a list of supported discs and formats.

Remove a disc

Press [0] (Eject) button

‰

Play/ Pause

Select a chapter/scene/track/frequency

Press [38] button once to pause.

Move control knob to the right or left.

Press again to resume playing.

Selects a music or chapter, track, or frequency.

Select a band/folder

Stop/ play

Press [7] button to stop playing.

Press [38] button to resume playing from

the previous interrupted position.

Move control knob up to change to the

radio bands to FM1/2/3 or next folder/disc.

Move control knob downwards to change

the radio band to AM or previous folder/disc.

Fast scan forward/backward

Press [¡] button and hold it for fast scanning

forward through the track.

Press [1] button and hold it for fast scanning

backward through the track.

Next page 3

English

Basic Operations

Switches the video source

The video source switches in the following order each time you press the button.

Built-in Disc Player

Video

iPod

Rear Camera

Navigation

You can also turn off the video display by pressing the button longer than 1 second.

When you press the button again, the previous video display comes back on.

⁄

• The Rear view camera video is displayed when the vehicle's gear is in "Reverse".

• Set the "NAVIGATION" of the <AV Interface Setup> (page 72) to "RGB"/"AV-IN" to display the Navigation video.

KVT-719DVD/KVT-739DVD

Playing a USB device

When connecting a USB device, playback starts automatically.

Removing the USB device

Press

on the USB control screen to enter the USB suspend mode, and then remove the USB

device. Refer to <USB Device Control> (page 41).

•

Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

⁄

• If the USB source is selected when a USB device is not connected, "No Device" is displayed.

• When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last

time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the

contents in the USB device is changed.

• Make sure that the USB device is connected firmly.

Switches the audio source

The audio source is switched in the following order each time you press the button.

SAT

Receives FM/AM broadcast. (page 32)

TUNER or HD Radio

Build-in Disc Player

USB device

iPod

ViIPDoEdO

Plays back the disc inserted in an external player, such as a CD changer (optional accessory).

(page 23)

External Disc Player

Video

AUX EXT

Outputs a sound signal input to the external AUX terminal (optional accessory).

Navigation

Standby

Although nothing is played back, the clock etc are displayed.

⁄

• You cannot switch to a source that is not connected or inserted.

• You can also play audio files, video files, and picture files with the Built-in Disc Player. Refer to <List of playable discs>

(page 8) for the type and format of these media.

• It is necessary to set "NAVIGATION Source" of <AV Interface Setup> (page 72) to "On" to add Navigation as an audio

source that can be selected with the [SRC] button.

English

sic

per

ati

eration

Common operation

D E

Switches the function screen

The function control screen switches in the following order each time you press the button.

Picture & Easy Control Panel

Source Control Screen

Picture Panel (OFF)

The following buttons are always displayed on the source control screen.

Displays the Source Select screen. (page 55)

Returns to the Source Control screen.

Displays the Audio Control Menu screen. (page 84)

Displays the SETUP Menu screen. (page 66)

Adjusts the Volume.

Clock display

⁄

Touch

•

displayed at bottom right of various screens to return to

the original screen.

KVT-719DVD/KVT-739DVD

Theft Deterrent Protection panel

Switches Seek Mode

The protection panel of the unit can be

detached and taken with you, helping to deter

theft.

Press the butotn to selects the Seek mode. (see

page 33, 45, 53 for the <Seek Mode>)

Removing the Protection panel

Press the Release button . Drawing the

protection panel to left side pull it to forward

and remove it.

Switches AV OUT source

Switches the source that is output at the AV

OUTPUT terminal when it is pressed more than

1 second.

Screen Setup

Press the button.

Displays the Screen Control Screen (page 58).

• Close the monitor first, then remove or attach the

protection panel.

• After you have removed the protection panel, you

cannot operate the receiver.

• After you have removed the protection panel, you can

flash the burglar alarm lamp (page 80).

Reattaching the Protection panel

Place the right end of the protection panel

onto hooks and push it until clicked and

locked. Push the protection panel in until it

clicks. The protection panel is locked in place,

allowing you to use the unit.

Switches Screen Mode

Press the button to switches the screen mode.

(page 78)

The DVD Disc Menu screen appears when you

press the button more than 1 second. (page

20)

Two hooks

⁄

• DVD Disc Menu is not available when the top menu of

the DVD is shown.

English

Watching DVD/VCD

You can play DVD/VCD using various functions.

•

For the basic method of how to watch DVD/VCD, refer to <Basic Operations> (page 12).

Set the remote controller mode switch to "DVD" mode before starting operation, refer to <Remote Controller mode switch>

(page 88).

Functions During the Playback Screen

VCD playback screen

Basic functions are available even when the

playback screen is displayed.

Display the playback screen.

8 Scene/Track Number Display

9 Play time Display

p Forward Scene/Track Search Area

Selects the next scene (when PBC is On) or

track (when PBC is Off).

q Backward Scene/Track Search Area

Selects the previous scene (when PBC is On)

or track (when PBC is Off).

w Zoom Control Button Area

Displays the Zoom Control buttons (page

22).

DVD playback screen

e Information Display Button Area

⁄

•

The information display is cleared automatically after

approximately 5 seconds. Also, the information can be

displayed automatically when it is updated.

1 Title Number Display

2 Chapter Number Display

3 Play Time Display

4 Forward Chapter Search Area

Selects the next chapter.

5 Backward Chapter Search Area

Selects the previous chapter.

6 DVD Disc Menu Control Buttons Area

Displays the Disc Menu Control buttons

(page 20).

7 Information Display Button Area

KVT-719DVD/KVT-739DVD

Functions When Displaying the Easy

Control Panel

Functions While Displaying the Control

Screen

Displays a floating control panel in the screen.

Switches to control screen to use various playback

functions.

1 Switches the source.

2 Stops playing.

When pressed twice, the disc is played from

its beginning when you play it in the next

time.

3 Fast Forwards or Fast Backwards.

4 Chapter Search (during DVD play)

Searches for a chapter.

12 13

Scene/Track Search (during VCD play)

Selects a scene (when PBC is On) or a track

(when PBC is Off).

5 Plays or pauses.

6 Displays the Screen Control screen.

Refer to <Screen Control> (page 58).

⁄

•

The Easy Control Panel is hidden when you touch a

central part of the monitor.

Next page 3

English

Watching DVD/VCD

When playing a VCD

DVD Disc Menu

Selects an option from the DVD Disc Menu.

Display the Disc Menu Control screen

1 Ejects the disc from the built-in disc player.

2 Fast Forwards or Fast Backwards.

3 Stops playing.

When pressed twice, the disc is played from

its beginning when you play it in the next

time.

4 Selects a chapter, a scene or a track.

When the DVD-VIDEO/VCD is paused, touch

this button to start single-frame stepping.

5 Plays or pauses.

6 Slow Forwards or Backwards. (during DVD

play)

7 Switches the button display.

8 Switches the Repeat Play operations in the

following sequence.

DVD: Title Repeat, Chapter Repeat, Repeat

Off

VCD: Track Repeat, Repeat Off (Available

when the PBC is off)

9 Switches the play time display in the

following sequence.

DVD: Chapter, title, remaining titles

VCD: Track, disc, remaining discs (Effective

only when the PBC function is off)

p Title Number Display (during DVD play)

q Chapter/Scene/Track Number Display

w Play Mode Display

1 Calls the Menu.

2 Returns to the Disc Menu screen.

3 Selects a menu option.

4 Enters your menu selection.

5 Returns to the previous menu screen.

6 Displays the Top Menu.

7 Highlight Control.

8 Clears the Disc Menu Control.

e Play Time Display

r Volume Label Display

When

is appeared, the text display is

scrolled by pressing it.

t Function Indicator

y Appears when a disc is inserted.

u Turns the PBC function of VCD On or Off.

(only when VCD Ver 2.0 is in use)

KVT-719DVD/KVT-739DVD

Highlight Control

q Switches the subtitle language.

(during program playback only)

w Switches the voice language.

(during program playback only)

e Displays the Zoom Control screen.

r Clears the Disc Menu Control.

You can select a chapter and title for the DVD

Menu screen. When you touch the screen, you

can select the DVD menu.

Zoom Control

H i g h l i gh t On

⁄

•

To cancel Highlight Control, press [V.SEL] button.

Select Disc Menu options

t Changes the zoom ratio at 4 levels (2 times,

3 times, 4 times, or off) each time you

touch.

Disc Menu

y Scrolls the screen in the direction you

touch.

u Returns to the Disc Menu Control screen.

i Clears the Disc Menu Control.

9 Calls the Menu Control.

p Switches the picture angle.

(during program playback only)

English

Watching DVD/VCD

VCD Zoom Control

Direct Search

Displays an enlarged VCD screen.

You can search for a DVD/VCD chapter, scene or

track by entering its number.

Display the Zoom Control screen

Select the Direct Search mode

R.VOL

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

The following items can be searched directly

each time it is pressed.

DVD: Title, Chapter, Time, Direct number

VCD (when PBC is On): Scene, Direct number

VCD (when PBC is Off): Track

However, the direct search may not be

supported for some discs.

Enter a number or time

ꢁ

2ZONE

2^ABC3DEF

ꢂ

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

1 Changes the zoom ratio at 2 levels (2 times,

or off) each time you touch.

2 Clears the Zoom Control button.

When playing back a VCD, enter a PBC scene

number (if PBC is On) or a track number (if PBC

is Off).

⁄

CLEAR

•

To clear your incorrect entry, press

(CLEAR).

AUD•

DVD•

T V•

ENTER

AM−

OPEN

VOL

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

The time search function cannot be searched correctly at

the time set up depending on particular disc.

KVT-719DVD/KVT-739DVD

Music Disc & Audio File Listening

You can recall various control screens during CD/Audio file/Disc Changer playback.

•

For the basic method of how to play a music disc/audio file, refer to <Basic Operations> (page 12).

Refer to <List of playable discs> (page 8) for playable discs.

Refer to <About Audio file> (page 10) for playable files.

Functions When Displaying the Easy

Control Panel

8 Displays the Screen Control screen.

(page 58 for the <Screen Control>)

⁄

Displays a floating control panel in the screen.

•

The Easy Control Panel is hidden when you touch a

central part of the monitor.

During CD playback

During Audio file playback

During playback on disc changer

1 Switches the source.

2 Stops playing.

3 Fast Forwards or Fast Backwards. (only when

a CD is played back on the built-in disc

player).

4 Selects a music.

When you continue to touch button:

Fast Forwards or Fast Backwards.

Disabled when a CD (built-in disc player) are

being played.

5 Plays or pauses.

6 Selects a folder. (only when an Audio file is

played back on the built-in disc player)

7 Selects a disc. (only when a disc is played

back on the disc changer)

English

Music Disc & Audio File Listening

Functions While Displaying the Control

Screen

8 Starts or stops Scan Play (that plays the

beginning of each music one after the

other).

9 Repeats to play (the present track).

p Starts or stops Random Play (to play music

in random order).

Switches to control screen to use various playback

functions.

q Switches the number of lines displayed in

the Information Display.

w Switches the play time display between

Track, Disc, and Disc Remaining Time.

e Track (Music) Number Display

r Play Mode Display

t Play Time Display

y Function Indicator

u Appears when a disc is inserted.

i Sets a name to the disc being played. See

<Set Disc Name> (page 27).

During CD playback

1 Music information display

Selects the Disc Name (See <Set Disc

Name>, page 27), Disc Text or Track Text.

When

is appeared, the text display is

scrolled by pressing it.

2 Ejects the disc from the built-in disc player.

3 Fast Forwards or Fast Backwards.

4 Stops playing the built-in disc player. When

pressed twice, the disc is played from its

beginning when you play it in the next

time.

5 Selects a track.

6 Plays or pauses.

7 Switches the button display.

KVT-719DVD/KVT-739DVD

During Audio file playback

m You can search for folders and Audio files

through a hierarchy. See <Folder Select

(Function of Audio File)> (page 27).

, Displays music information (such as Tag

and content property) of Audio file being

played.

o Music information display

Selects Folder Name, File Name, Title, Artist

Name, or Album Name.

When

is appeared, the text display is

scrolled by pressing it.

; Ejects a disc.

a Fast Forwards or Fast Backwards.

(Disabled when a JPEG is being played.)

s Stops playing.

When pressed twice, the disc is played back

from its beginning in the next time.

d Selects a file.

f Plays or pauses.

g Selects a folder.

h Switches the button display.

j Starts or stops Scan Play (that plays the

beginning of each music or data one after

the other).

k Repeats to play (the preset files or data).

l Starts or stops Random Play (to play files of

the present folder in random order).

/ Switches the number of lines displayed in

the Information Display.

z Folder and File Number Display

x Play Mode Display

c Play Time Display

v Function Indicator

b Appears when a disc is inserted.

n Repeats to play the music or data of the

present folder.

Next page 3

English

Music Disc & Audio File Listening

During playback on disc changer

G Sets a name to the disc being played. (page

27)

H Displays a list of discs in the Disc changer

and allows you to select the disc to listen.

See <Disc Select> (page 28).

. Music information display

⁄

Selects the Disc Name (see <Set Disc

Name>, page 27) or Track Text mode for

text display.

•

The functions that can be used and the information that

can be displayed will differ depending on the models

being connected.

The information shown will be different depending on

the Disc Changer being used.

The buttons and information displayed depend on

the Audio file being played and CD and Disc changer

functions.

When

scrolled by pressing it.

P Selects a track.

Starts Fast Forward or Fast Backward when

it is held down.

Q Selects a disc. (Function of Disc Changer)

W Plays or pauses.

is appeared, the text display is

•

E Switches the button display.

R Starts or stops Scan Play (that plays the

beginning of each music one after the

other).

T Repeats to play (the present music).

Y Starts or stops Random Play (to play music

in random order).

U Switches the number of lines displayed in

the Information Display.

I Disc Number Display (Function of Disc

Changer)

O Track Number Display

: Play Time Display

A Function Indicator

S Appears when a disc is inserted.

D Repeats to play a disc (the present disc).

(Function of Disc Changer)

F Starts or stops Magazine Random Play (to

play songs of the disc changer in random

order). (Function of Disc Changer)

KVT-719DVD/KVT-739DVD

Set Disc Name

Folder Select (Function of Audio File)

Assigns a name to a CD.

Searches folders and Audio files stored in media

and devices according to hierarchy.

Play a CD you wish to name

Start Name set

Start Folder Select

Selects a song

Enter the name

See <Character Entry> (page 57) for

information on how to enter a name.

End Name set

1 Scrolls the list.

2 Lists folders and Audio files.

Folder opens when touched, and the Audio

file is played.

3 Moves to the top hierarchy level.

4 Moves up a hierarchy level.

5 Returns to the original screen.

English

Music Disc & Audio File Listening

Enter a track number

Disc Select (Function of Disc Changer)

ꢁ

2ZONE

Displays a list of discs in the Disc changer and

allows you to select the disc to listen.

2^ABC3DEF

ꢂ

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

Start Direct Select

When searching for a track:

TOP MENU

DVD SETUP

RETURN

AUDIO

SUBTITLE

ANGLE

ZOOM

ꢀꢃ

ꢄ

AUD

•

DVD

Select a Disc

During play on an external in disc player or

disc changer

Enter a disc or track number

ꢁ

2ZONE

2^ABC3DEF

ꢂ

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

1 Lists the discs. Plays when touched.

2 Switches the list name to Disc name or Disc

Text.

When searching for a track:

3 Returns to the original screen.

AM−

OPEN

VOL

Direct Search

ꢅ

ꢁ

2ZONE

2^ABC3DEF

Searches for a disc or a track when its number is

entered.

ꢂ

ꢁ

4GHI 5JKL 6MNO

When searching for a disc:

During play on the built-in disc player

AM−

OPEN

Select the Direct Search mode

VOL

ꢅ

ꢁ

R.VOL

2ZONE

2^ABC3DEF

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

The following items can be searched directly

each time it is pressed.

CD: Track number, Total play time

Audio file: Folder, File

KVT-719DVD/KVT-739DVD

Video File/Picture File Watching

You can recall various control screens during playback of video file (MPEG 1, MPEG 2 and DivX file) and

picture file (JPEG file).

Functions When Displaying the Easy

Control Panel

Function During Playback Screen

Basic functions are available even when the

playback screen is displayed.

Displays a floating control panel in the screen.

Display the playback screen.

1 Switches the source.

2 Stops playing.

3 Selects a folder.

4 Selects a file.

1 Folder/File Number Display

2 Play Time Display

3 Forward File Search Area

Selects the next file.

5 Plays or pause.

4 Backward File Search Area

Selects the previous file.

5 JPEG: Picture Control Button Area (page 31)

DivX: Sub=Off, Audio 1/1

MPEG: Not effective

6 Information Display Button Area

English

Video File/Picture File Watching

Functions While Displaying the Control

Screen

9 Starts or stops Scan Play (that plays the

beginning of each song or data one after

the other).

p Repeats to play (the preset files or data).

q Starts or stops Random Play (to play files of

the present folder in random order).

w Switches the number of lines displayed in

the Information Display.

Switches to control screen to use various playback

functions.

e Folder and File Number Display

r Play Mode Display

t Play Time Display

y Function Indicator

u Appears when a disc is inserted

i Repeats to play the file of the present folder.

o You can search for folders and files through

a hierarchy. See <Folder Select> (page 31).

; Displays information of file being played.

1 Video/Picture information display

Selects Folder Name, File Name, Title, Artist

Name, or Album Name.

When

is appeared, the text display is

scrolled by pressing it.

2 Ejects a disc.

3 Fast Forwards or Fast Backwards.

(Disabled when a JPEG is being played.)

4 Stops playing.

When pressed twice, the disc is played back

from its beginning in the next time.

5 Selects a file.

6 Plays or pauses.

7 Selects a folder.

8 Switches the button display.

KVT-719DVD/KVT-739DVD

Picture Control

Folder Select

Adjusting the video display.

Searches folders and Video files/Pictures stored in

media and devices according to hierarchy.

Start Picture Control

Start Folder Select

Adjust the video display

Select a file

1 Reverses the picture horizontally.

2 Rotates counter clockwise.

3 Rotates clockwise.

1 Scrolls the list.

4 Ends Picture Control.

2 Lists folders and Video files/Picture files.

Folder opens when touched, and the Video/

Picture file is played.

3 Moves to the top hierarchy level.

4 Moves up a hierarchy level.

5 Returns to the original screen.

English

Radio Listening

Various control screens appear in the Tuner Source mode.

•

For the basic method of receiver button operations, refer to <Basic Operations> (page 12).

Set the remote controller mode switch to "AUD" mode before starting operation, refer to <Remote Controller mode switch>

(page 88).

Functions While Displaying the Control

Screen

Functions When Displaying the Easy

Control Panel

Switch to control screen to use various functions.

Displays a floating control panel in the screen.

1 Switches the source.

2 Switches the band (to AM or FM1/2/3).

3 Tunes in a station.

4 Switches the Seek mode.

See <Seek Mode> (page 33).

5 Displays the Screen Control screen.

See <Screen Control> (page 58).

⁄

•

The Easy Control Panel is hidden when you touch a

central part of the monitor.

1 Radio station information display.

Selects the Program Service Name, Title &

Artist name, Station Name, Category Name

1/2, or Radio Text.

2 Turns the Traffic Information function On or

Off.

See <Traffic Information>, (page 37).

3 Switches to the FM1/2/3 band.

4 Switches to the AM band.

5 Tunes in a station.

Use the <Seek Mode> (page 33) to change

the frequency switching.

KVT-719DVD/KVT-739DVD

6 Switches the button display.

Seek Mode

7 Turns the CRSC function On or Off. (Only

when receiving the FM broadcast)

8 Selects the Auto Memory mode.

(Refer to page 34 for the <Auto Memory>)

9 Switches the Seek mode.

Sets a station selection.

(Refer to page 33 for the <Seek Mode>)

p Switches the number of lines displayed in

the Information Display.

The mode is switched in following order each

time you touch the button.

Display

Setting

q When

buttons appear, you

"AUTO1"

Tunes in a station with good reception

automatically.

Tunes in stations in memory one after another.

Switches to the next frequency manually.

can recall the stations on memory.

For memory of broadcasting stations, refer

to <Auto Memory> (page 34) or <Manual

Memory> (page 34).

"AUTO2"

"MANU"

w Sets a name to the station. See <Set Station

Name> (page 36).

e Searches station by program type. See

<Search for Program Type> (page 37).

r Lists and selects memorized station. See

<Preset Select> (page 35).

t Displays Radio Text screen. See <Radio

Text> (page 35).

English

Radio Listening

Auto Memory

Manual Memory

Stores stations with good reception in memory

automatically.

Stores the current receiving station in memory.

Select a station you wish to store in

memory

Select a band you wish to store in memory

Select the Auto Memory mode

Start Auto Memory

Store in memory

Continue to touch until the memory number

appears.

Touch

Auto Memory terminates when 6 stations are

stored or when all stations are tuned in.

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

KVT-719DVD/KVT-739DVD

: Press for # seconds.

Preset Select

Radio Text

Lists and selects memorized station.

You can display the radio text. (Only when

receiving the FM broadcast).

Start Preset Select

Select a station

Display the radio text

Selects a station

1 Scrolls the list.

2 Memorized stations are displayed. Touch to

tune in.

3 Switches the list display name to Station

name or Program Service Name.

4 Returns to the original screen.

1 Select the Program Service Name, Title &

Artist name, Station Name, Radio Text Plus,

or Radio Text for text display.

When

is appeared, the text display is

scrolled by pressing it.

2 Scrolls the Radio text plus display.

3 Returns to the original screen.

English

Radio Listening

Set Station Name

Direct Search

Assigns a name to a station.

Tunes in a station when its frequency is entered.

Tune in to the station to name

Start Name set

Select a band

AM−

OPEN

VOL

ꢅ

ꢁ

2ZONE

2^ABC3DEF

Select the Direct Search mode

R.VOL

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

Enter frequency

Enter the name

ꢁ

2ZONE

2^ABC3DEF

ꢂ

See <Character Entry> (page 57) for

information on how to enter a name.

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

End Name set

When you enter frequency, signal reception

starts.

Example: When you receive FM 92.1 MHz

9WXYZ

2ABC

Example: When you receive AM 810 kHz

8TUV

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

KVT-719DVD/KVT-739DVD

Traffic Information

Search for Program Type

When a traffic bulletin starts, any source is

switched to the traffic information and it is

displayed automatically.

A program is tuned when you set its program

type. (Only when receiving the FM broadcast)

Enter Program Type mode

Set the Traffice information mode

Select a Program Type

When the traffic bulletin starts...

The Traffic Information screen appears

automatically.

Traffic Information screen

1 Program Type is displayed. Touch to select a

Program Type.

2 Scrolls the Program Type list.

3 Search for the program type.

It is displayed when the Program type is

selected.

4 Continue to touch more than 2 seconds,

the currently receiving station is registered

to have the selected program type.

5 Returns to the original screen.

⁄

•

It is necessary to have Traffic Information function set to

On in order to have the Traffic Information screen appear

automatically.

During reception of traffic information the adjusted

volume is automatically remembered, and the next time

it switches to traffic information it's automatically the

remembered volume.

Searches station of the selected Program

Type

English

iPod Control

You can control and listen to songs in your iPod by connecting iPod with video or iPod nano to this unit

with KCA-iP300V (optional accessory). You can also display video contents on this unit when connecting an

iPod with video.

Functions When Displaying the Easy

Control Panel

Connecting an iPod

Connect an iPod to this unit.

Displays a floating control panel in the screen.

1 Forward video/audio search area

Select the next video/audio.

2 Backward video/audio search area

Select the previous video/audio.

3 Information display button area

The information is display for 5 seconds.

1 Switches the source.

2 Fast Forward or Fast Backward.

3 Music/Video Search.

4 Plays or pause.

⁄

•

Remove all accessories such as headphone before

connecting an iPod. You may not be able to control the

iPod if you connect it with accessories attached.

When you connect an iPod to this unit, playback starts

from the song you were playing on the iPod itself

(Resume Function).

5 Displays the Screen Control screen. Refer to

<Screen Control> (page 58).

⁄

•

The Easy Control Panel display is hidden when you touch

a central area of the monitor.

•

If the played song is not a video content, "No iPod Video

Signal" is displayed on the video screen.

While connecting an iPod, "KENWOOD" appears on the

iPod and the iPod's control is disabled.

KVT-719DVD/KVT-739DVD

Functions While Displaying the Control

Screen

6 Starts or stops Scan Play (that plays the

beginning of each music or video one after

the other).

7 Repeats to play (the preset files or data).

8 Starts or stops Random play.*

9 Total number of music in the iPod and the

music number display

Switches to control screen to use various playback

functions.

p Play Mode Display

q Play Time Display

w Starts or stops Album Random Play (plays

randomly from current album).*

e Displays the list of music category. See

<iPod List> (page 40).

r Displays the list of video category. See

<iPod List> (page 40).

t Displays the previous music/video list

screen. See <iPod List> (page 40).

y Displays information screen of music/video

being played.

⁄

•

* Disable when video is being played.

1 Music/Video Information Display

Selects the Title, Artist Name, Album Name

or iPod Name.

When

is appeared, the text display is

scrolled by pressing it.

2 Fast Forward or Fast Backward.

3 Select Music/Video.

4 Plays or pause.

5 Switches the button display.

English

iPod Control

iPod List

Lists and searches music/video contained in the

iPod.

Display the iPod List

Select music/video

1 Switches list page.

2 Categories and music are listed.

Touch a category name to move its lower

level. If music title is displayed, the music is

played by touching it.

is touched, all the music in its

category is played.

3 Returns to previous category.

4 Moves to the top category.

5 Displays the currently playing category.

KVT-719DVD/KVT-739DVD

USB Device Control

You can control and listen to songs in your USB device by simply connecting it to the USB connector of this

unit.

•

For the connection of a USB device, refer to <Basic Operations> (page 12).

Functions When Displaying the Easy

Control Panel

Functions While Displaying the Control

Screen

Displays a floating control panel in the screen.

Switches to control screen to use various playback

functions.

1 Switches the source.

2 Selects a folder. (Only in Folder Select

mode)

3 Selects a file.

4 Plays or pause.

5 Displays the Screen control screen. Refer to

<Screen Control> (page 58).

⁄

•

The Easy Control Panel display is hidden when you touch

a central area of the monitor.

1 Music information display

Selects the Folder Name, File Name, TItle,

Artist Name, or Album Name.

When

is appeared, the text display is

scrolled by pressing it.

Next page 3

English

USB Device Control

2 Removes the USB device.

USB List

When "No Device" is shown, the USB device

can be removed safely.

If you wish to play it again while the USB

device is connected, press it again.

3 Selects a folder. (Only in Folder Select

mode)

Lists and searches music contained in the USB

device.

Display the Category List

4 Selects a file.

5 Plays or pauses.

6 Switches the button display.

7 Starts or stops Scan Play (that plays the

beginning of each music one after the

other).

8 Repeats to play (the present music).

9 Starts or stops Random Play (to play music

in random order). (Only in Folder Select

Mode)*

Select a category

p Switches the number of lines displayed in

the Information Display.

q Track (Music) Number Display

w Play Mode Display

e Play Time Display

1 Returns to the origintal screen.

Select music

r Repeats to play the music or data of the

present folder. (Only in Folder Select Mode)

t Displays the Folder List. Refer to <Folder

Select> (page 43).

y Displays the list of category. Refer to <USB

List> (page 42).

u Displays information screen of music being

played.

2 Switches to the lower level of the category.

3 Lists all the music in the selected category.

4 Moves to the upper level of the category.

5 Moves to the top category.

6 Displays the currently playing category.

(Only in Category Mode)

⁄

7 Returns to the original screen.

•

* Disable during play list mode.

KVT-719DVD/KVT-739DVD

Folder Select

Searches folders and Audio files stored in the USB

device according to hierarchy.

Start Folder Select

Select music

1 Scrolls the list.

2 Lists folders and Audio files

Folder opens when touched, and the Audio

file is played.

3 Moves to the top hierarchy level.

4 Moves up a hierarchy level.

5 Displays the currently playing file.

6 Returns to the original screen.

English

TV Watching

Various control screens appear in the TV Source mode. (You can only operate TV with the optional

accessory TV Tuner connected.)

Functions During TV Screen

Functions When Displaying the Easy

Control Panel

Basic functions are available even when the TV

screen is displayed.

Displays a floating control panel in the screen.

Display the TV screen

1 TV Band Number Display

2 Memory Number Display

3 Channel Number Display

4 Channel Up Area

Increase the channel.

5 Channel Down Area

Decrease the channel.

6 Band Switch Area

Switches to TV1 or TV2.

7 Information Display Button Area

1 Switches the source.

2 Switches the TV band (to TV1 or TV2).

3 Select a channel.

Use the <Seek Mode> (page 45) to change

the channel tuning sequence.

⁄

4 Switches the Seek mode.

•

For TV picture selection and receiver key operations, see

<Basic operations> (page 12).

(page 45 for the <Seek Mode>)

5 Displays the Screen Control screen.

(page 58 for the <Screen Control>)

The information display is cleared automatically after

approximately 5 seconds. Also, the information can be

displayed automatically when it is updated.

⁄

•

The Easy Control Panel display is hidden when you touch

a central area of the monitor.

KVT-719DVD/KVT-739DVD

Functions While Displaying the Control

Screen

7 Indicates current Seek mode.

8 Memory Number Display

9 Channel Number Display

Switches to control screen to use various playback

functions.

p When

buttons appear, you

can recall channels on memory.

For memory of broadcasting stations, see

<Auto Memory> (page 46) or <Manual

Memory> (page 46).

q Sets a name to the tuned station. (page 47)

w Lists and selects memorized station. See

<Preset Select> (page 46).

Seek mode

Sets a station selection.

The mode is switched in following order each

time you touch the button.

Display

"AUTO1"

Setting

Tunes in a station with good reception

automatically.

"AUTO2"

"MANU"

Tunes in stations in memory one after another.

Switches to the next frequency manually.

1 Channel information display

2 Switches to TV1 or TV2.

3 Select a channel.

Use the <Seek Mode> (page 45) to change

the channel tuning sequence.

4 Switches the button display.

5 Selects the Auto Memory mode.

Refer to <Auto Memory> (page 46).

6 Switches the Seek mode.

Refer to <Seek Mode> (page 45).

English

TV Watching

Auto Memory

Manual Memory

Stores stations with good reception in memory

automatically.

Stores the current receiving channel in memory.

Select a station you wish to store in

memory

Select a band you wish to store in memory

Select the Auto Memory mode

Start Auto Memory

Store in memory

Continue to touch until the memory number

appears.

Preset Select

Lists and selects memorized station.

Start Preset Select

Auto Memory terminates when 6 stations are

stored or when all stations are tuned in.

⁄

•

The operation ends automatically if you do not operate

within 10 seconds.

KVT-719DVD/KVT-739DVD

: Press for # seconds.

Selects a station

Direct Search

Tunes in a station when its channel number is

entered.

Select a band

AM−

OPEN

VOL

ꢅ

ꢁ

2ZONE

2^ABC3DEF

1 Memorized stations are displayed. Touch to

tune in.

Select the Direct Search mode

R.VOL

2 Returns to the original screen.

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

Set Station Name

Assigns a name to a station.

Enter the channel number

Select a station you wish to name

Start Name set

ꢁ

2ZONE

2^ABC3DEF

ꢂ

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

When you enter a channel number, signal

reception starts.

Example: When you receive Channel 06

6MNO

⁄

•

Direct Search ends automatically if you do not operate

within 10 seconds.

Enter the name

See <Character Entry> (page 57) for

information on how to enter a name.

End Name set

English

Video Watching

Functions When Displaying the Easy

Control Panel

Displays a floating control panel in the screen.

1 Switches the source.

2 Displays the Screen Control screen.

(page 58 for the <Screen Control>)

⁄

•

The Easy Control Panel display is hidden when you touch

a central area of the monitor.

KVT-719DVD/KVT-739DVD

Satellite Radio Control (North American sales area only)

Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite

radio connected only)

Functions When Displaying the Easy

Control Panel

Functions While Displaying the Control

Screen

Displays a floating control panel in the screen.

Switches to control screen to use various

functions.

1 Switches the source.

2 Switches the band.

3 Tunes in a station.

4 Switches the Seek mode.

SEEK 1: Tunes channels one after the other.

SEEK 2: Selects channels in memory one

after the other.

5 Displays the Screen Control screen.

Refer to <Screen Control> (page 58).

⁄

•

For system key operations, see <Basic operations> (page

12).

The Easy Control Panel display is hidden when you touch

a central area of the monitor.

1 Displays information concerning music

being played.

Changes the display from Song Title & Artist

Name, Composer Name, Channel Name, to

Category Name.

2 Tunes in a station.

3 Switches the band.

4 Switches the button display.

5 Starts or stops Channel Scan (that tunes

channels one after the other).

Next page 3

English

Satellite Radio Control (North American sales area only)

6 Switches the Seek mode.

Channel Search

SEEK 1: Tunes channels one after the other.

SEEK 2: Selects channels in memory one

after the other.

Specifying the desired category and selecting a

channel.

7 Switches the number of lines displayed in

the Information Display.

Start Channel Search

8 Indicates current Seek mode

9 When

buttons appear, you

can recall the channel on memory. For

memory of channel stations, see <Channel

Memory> (page 51) .

See functions while displaying the <Screen

Control> (page 58).

Select a category

p You can tune in by entering the desired

channel number. See <Direct Channel

Search> (page 51)

q You can tune in by specifying the desired

category. See <Channel Search> (page 50)

w Displays the program information screen.

1 Selects a category.

Displays the channel screen.

2 Scrolls the category.

3 Returns to the original screen.

Select a channel

4 Selects a channel.

Tunes in the selected channel.

5 Scrolls the channel.

6 Returns to the original screen.

KVT-719DVD/KVT-739DVD

: Press for # seconds.

Channel Memory

Direct Channel Search

Stores the current receiving channel in memory.

Tuning in by entering the desired channel

number.

Select a channel you wish to store in

memory

Start Direct Channel Search

Displays the Direct Search screen.

Store in memory

Enter the channel number

Continue to touch until the memory number

appears.

Enters the channel number.

Returns to the original screen.

Tune in the channel

English

HD Radio Control

Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner

connected only)

Functions While Displaying the Control

Screen

Functions When Displaying the Easy

Control Panel

Switches to control screen to use various

functions.

Displays a floating control panel in the screen.

1 Switches the source.

2 Switches the band (HD FM1/2/3, HD AM).

3 Tunes in a station.

4 Switches the Seek mode. (See page 53 for

the <Seek Mode>)

5 Displays the Screen Control screen. (page

58 for the <Screen control>)

⁄

•

The Easy Control Panel display is hidden when you touch

a central area of the monitor.

1 Displays information concerning music

being played.

Switches between Station Name and Song

Title display modes.

2 Switches to the HD FM1/2/3 band.

3 Switches to the HD AM band.

4 Tunes in a station.

Use the <Seek Mode> (page 53) to change

the frequency switching.

5 Switches the button display.

KVT-719DVD/KVT-739DVD

6 Selects the Auto Memory mode.

Refer to <Auto Memory> (page 54)

7 Switches the Seek mode.

Seek Mode

Sets a station selection.

Refer to <Seek Mode> (page 53)

8 Switches the number of lines displayed in

the Information Display.

The mode is switched in following order each

time you touch the button.

Selects the channel on memory.

Display

Setting

"AUTO1"

Tunes in a station with good reception

automatically.

"AUTO2"

"MANU"

Tunes in stations in memory one after another.

Switches to the next frequency manually.

p The Receive mode switches in the following

order.

Auto: Automatically switches between the

Digital and Analog Receive modes

depending on the broadcasting type.

If programs are broadcasted in

both modes, the digital program

is received. Also, if a program is

received in the Ball Game mode (the

non-displayed broadcast program),

the analog program is automatically

received.

Digital: Receives the digital program only.

Analog: Receives the analog program only.

q Displays the tuned in music information.

⁄

•

[SCRL] button is not displayed when there is no text

information.

English

HD Radio Control

Auto Memory

: Press for # seconds.

Manual Memory

Stores stations with good reception in memory

automatically.

Stores the current receiving station in memory.

Select a station you wish to store in

memory

Select a band you wish to store in memory

Select the Auto Memory mode

Start Auto Memory

Store in memory

Continue to touch until the memory number

appears.

Auto Memory terminates when 6 stations are

stored or when all stations are tuned in.

KVT-719DVD/KVT-739DVD

Source Select

The source you wish to listen to can be selected quickly.

Displaying the Control Screen

Display control screen

Press several times until the Control Screen

appears.

Display source select screen

Select a source

1 Switches to the selected source.

2 Scrolls the source display.

3 Displays the Hands-Free Control screen.

See <Hands Free Unit Control> (page 59).

⁄

•

The displayed source depends on the type of device

connected. In addition, you cannot press the button of

currently unavailable source.

English

Muting Audio Volume upon Reception of Phone call

Muting Audio Volume upon Reception of

Phone Call

When the telephone is called, the system is

paused automatically.

When the telephone is called...

The Phone Call ("CALL") screen appears, and

system is paused.

Phone Call ("CALL") screen

If you want to continue to listen to the audio

source during phone call...

The system resumes audio play during the

phone call.

When the call ends...

Hang up the phone.

The system resumes playing automatically.

⁄

•

To use the TEL Mute feature, you need to hook up

the MUTE wire to your telephone using a commercial

telephone accessory. Refer to <INSTALLATION MANUAL>.

KVT-719DVD/KVT-739DVD

Character Entry

How To Use the Character Entry screen

When you select the Set Disc Name mode or

others, the following screen appears for character

entry.

Character Entry screen

1 Shifts the cursor.

2 Enters a space.

If you erase a character, locate the cursor on

it and touch this button.

3 Enters characters.

4 Scrolls up or down the character button

display.

5 Exits the Character Entry mode and returns

to the previous screen.

⁄

•

You can enter characters only after you have applied the

parking brake.

English

Screen Control

⁄

•

The Screen Control screen is displayed only when you

have applied the parking brake.

Setting the monitor screen.

•

The picture quality can be set for each source.

You can set image quality of screens such as menu from

<Monitor Setup> (page 78) of the <Setup Menu>.

Display Easy control panel

Display the Screen Control screen

Adjust the picture quality

1 Brightness Control

Disabled if Auto Dimmer is On.

2 Tint Control

Displayed for an NTSC system image on TV,

Video, iPod or Rear View Camera.

3 Color Control

Displayed on the TV, Video, iPod or Rear

View Camera screen only.

4 Contrast Control

5 Black Level Adjustment

6 Auto Dimmer Setup

When turned "On", the display is dimmed

automatically when the ambient becomes

dark.

7 Returns to the previous screen.

KVT-719DVD/KVT-739DVD

Hands Free Unit Control

•

You need to register your cell-phone to your Bluetooth Hands Free Box beforehand. Make sure to read the instruction manual

of the Bluetooth Hands Free Box as well.

10 11

Control Screen Function

Displaying the control screen and using various

functions.

Display the control screen

2 Displays the Search for Phone Book screen.

(See the <Calling by Phone Book>, page 61)

3 Displays the Out Going Calls screen.

(See the <Redialing>, page 63)

4 Displays the Incoming Calls screen.

(See the <Redialing>, page 63)

Press several times until the Control Screen

appears.

Display the source select screen

5 Switches between the private and hands-

free modes (only when a call in progress).

6 Displays the Hands-Free Set Up screen.

(See the <Setting up the Hands-Free

Phone>, page 64)

7 Enter three phone numbers for quick

dialing.

(See the <Quick Dialing>, page 61)

8 Enters a phone number.

(See the <When Dialing>, page 60)

9 Displays the signal strength.*

The more the number of bar segments, the

stronger the signal.

1 Displays the status of connection with the

cell-phone.

White: The cell-phone is connected.

Orange: The cell-phone is not connected, or

it is outside the service range.

p Displays the present Auto Answering status

Display the Hands-Free Control screen

AUTO

When Auto Answering is on:

When Auto Answering is off:

q Displays the battery drain of the cell-

phone.*

The more the number of bar segments, the

higher the battery level.

w Starts the call.

e Ends the call.

Clears the phone number being entered.

r Clears the entered phone number.

t Returns to the previous screen.

y Displays the calling and called phone

numbers. If you have registered a phone

number in the Phone Book, the destination

person name is displayed.

Next page 3

English

Hands Free Unit Control

When Dialing

⁄

•

While your car is moving, some functions are disabled for

safety’s sake. The buttons associated with the disabled

functions become ineffective if pressed.

Make a call by entering a phone number.

Enter a phone number

•

When the Hands-Free Control screen appears, the name

of the connected cell-phone is displayed for 5 seconds.

* Since the number of steps of the control unit is different

from that of the cell-phone, the statuses displayed on

the control unit may discord from those displayed on

the cell-phone. No status is displayed if information

about it cannot be obtained.

•

Setting the cell-phone in the private mode can disable

the hands-free function.

When Called

Make a call

When you receive a call, you can use the hands-

free phone.

Respond to a call

You can start talking when the destination

responds.

⁄

•

To clear your incorrect entry, touch

When a call arrives, the Hands-Free Control

screen appears automatically.

End the call

The previous screen reappears.

⁄

The previous screen reappears.

•

You can input max 32 digits.

KVT-719DVD/KVT-739DVD

: Press for # seconds.

Quick Dialing

Calling by Phone Book

You can register up to 3 phone numbers for quick

dialing.

You can call a person using his/her phone

number that you have registered in the Phone

Book.

To register a phone number:

Display the Phone Book screen

Display a phone number you wish to

See the <Calling by Phone Book> (page 61),

(page 60).

The Initial Input screen appears.

Initial Input screen

Continue to touch more than 2 seconds.

To call a phone number from memory:

1 Recall the phone number

1 Scrolls the character array display.

2 Displays the Phone Book beginning with

the name whose first character you have

touched.

3 Returns to the Hands-Free Control screen.

Select the initial character of a person

name in memory

Make a call

The Phone Book List screen appears.

⁄

•

Only the phone numbers can be registered for Quick

Dialing. Therefore, the destination subscriber name and

others are not displayed during dialing.

Next page 3

English

Hands Free Unit Control

Phone Book List screen

End the call

4 Scrolls the list.

The previous screen reappears.

5 Enters the destination name.

6 Cancels the operations.

7 Returns to the Hands-Free Control screen.

⁄

•

To use the Phone Book, it must have been downloaded

from the cell-phone. For more details, see the instruction

manual of your bluetooth Hands Free Box and your cell

phone.

Select a destination you wish to call

•

Up to 20 characters can be displayed for each name in

the Phone Book.

Initials including no corresponding name will not be

displayed.

During search, a non-accent character such as "u" is

searched for instead of an accent character such as "ü".

Confirm the destination

The Hands-Free Control screen appears again.

The selected destination data is displayed.

Make a call

You can start talking when the destination

responds.

KVT-719DVD/KVT-739DVD

Confirm the destination

Redialing

You can redial, one of the last 10 phone numbers

that you have called or received.

Display the Search for Outgoing Calls or

Incoming Calls screen

The Hands-Free Control screen appears again.

The selected destination data is displayed.

Make a call

: Outgoing Calls

: Incoming Calls

The Outgoing Calls or Incoming Calls list screen

appears.

Outgoing Calls or Incoming Calls screen

You can start talking when the destination

responds.

End the call

1 Scrolls the list.

2 Enters the destination name.

3 Switches the Redial List between 5 numbers

display and single number display.

4 Enters the destination data and returns to

the Hands-Free Control screen.

5 Returns to the Hands-Free Control screen.

The previous screen reappears.

⁄

Select a destination you wish to call

•

The Out Going Calls list screen or Incoming Calls list

screen shows the list of the calls originated from or

received at this unit. They are not the ones stored in the

cell-phone memory.

English

Hands Free Unit Control

Setting up the Hands-Free Phone

Selecting a Hands-Free Phone

The Hands-Free system can be set as follows.

You can choose the Hands-Free phone from the

list.

Display the Hands-Free Set Up screen

Hands-Free Set Up screen

Display the Phone Select list

1 Sets an automatic response time after call

termination. ( "8")

"Off": This function can not use.

"0-99": Sets to calling ring time (second).

2 Sets a ringing tone output position.

Phone Select screen

(

"Front R")

"Front L":

Outputs the tone from the

front left-hand side speaker.

"Front R": Outputs the tone from the

front right-hand side speaker.

"Front All": Outputs the tone from the

both front speakers.

3 Sets the beep of the incoming call.

(

"On")

"On": Beep is heard.

"Off": Beep is canceled.

4 Displays the Phone Select screen.

5 Displays the Phone Delete screen.

6 Returns to the Hands-Free Control screen.

1 Selects the cell-phone to be used as a

hands-free phone.

2 Returns to the Hands-Free Set Up screen.

Select a Hands-Free phone you wish to use

⁄

•

Either the time interval for automatic answer set on this

unit or the time interval set on the cell-phone, whichever

is shorter, takes effect.

Select the speaker which is further from the microphone

in order to prevent howling or echoes.

KVT-719DVD/KVT-739DVD

Deleting the Hands-Free Phone

⁄

•

The Phone Book, outgoing call list, and incoming call list

are deleted together with the deleted Hands-Free phone.

You can cancel a registration of Hands-Free

phone.

Display the Hands-Free Set Up screen

Display the Phone Delete list

Phone Delete screen

1 Selects the cell-phone to be deleted from

the list.

2 Returns to the Hands-Free Set Up screen.

Select a Hands-Free phone you wish to

delete

English

Setup Menu

You can set up various receiver parameters.

Setup Menu

Audio Setup

Displays the Setup menu to set various functions.

You can setup a speaker network, etc.

Display the control screen

Display the Audio SETUP screen

Touch [Audio SETUP] in the SETUP Menu (page

66).

⁄

•

[Audio SETUP] cannot be selected when no source is

selected.

Press several times until the control screen

appears.

Setup each item

Display the SETUP Menu

1 Selects the speaker to set the crossover. See

<Crossover Network Setup> (page 67).

2 Sets the availability of sub woofers.

3 Selects the type of front speakers.

"Standard": Setup for general diameter

speakers

Select the setup item

"Narrow": Setup for small diameter

speakers

"Middle":

Setup for middle diameter

speakers

"Wide":

Setup for large diameter

speakers

1 The selected setup screen appears.

2 Scrolls the setup menu.

4 Switches to the crossover setup screen.

See <Crossover Network Setup> (page 67).

5 Returns to the original screen.

KVT-719DVD/KVT-739DVD

Crossover Network Setup

DVD Setup

You can set a crossover frequency of speakers.

You can set up the DVD play.

Select the speaker to set the crossover

Display the DVD SETUP screen

Touch [DVD SETUP] in the SETUP Menu (page

66).

Setup each item

1 Sets the High Pass Filter of the front speaker.

2 Sets the High Pass Filter of the rear speaker.

3 Sets the Low Pass Filter of the sub woofer.

4 Switches to the crossover setup screen.

5 Returns to the original screen.

1 Selects a disc menu language.*

(See <Language Setup>, page 68)

2 Selects a subtitle language.*

(See <Language Setup>, page 68)

3 Selects an audio language.*

(See <Language Setup>, page 68)

4 Sets the dynamic range.* ( Wide)

The dynamic range is reduced by changing

from "Wide" to "Normal" and from "Normal"

to "Dialog". "Dialog" makes the total sound

volume becomes larger as compared with

"Wide" and "Normal", allowing you to listen

to the movie's dialog more clearly.

This is effective only when you are using a

Dolby Digital software.

Display the Crossover SETUP screen

Set the crossover

5 Returns to the original screen.

6 Sets the cross over frequency.

7 Sets the sub woofer phase. (Only when

"Subwoofer" is set to "On" in Audio Setup

and "LPF SUB FREQ" is set to other than

"Through")

⁄

•

* Disabled when a DVD is being played.

8 Returns to the original screen.

Next page 3

English

SETUP menu

Language Setup

Selects a language you use for the speech and

menus.

Display the Language Setup screen

Refer to <DVD Setup> (page 67) and select

[Menu Language], [Subtitle Language] or

[Audio Language].

6 Sets an angle mark display. ( On)

7 Selects the screen display mode.* ( 16:9)

"16:9": Displays wide pictures.

"4:3 LB": Displays wide pictures in the Letter

Box format (having black stripes at

the top and bottom of screen).

"4:3 PS": Displays wide pictures in the Pan &

Scan format (showing pictures cut

at the right and left ends).

Display the Language Setup screen

8 Displays the Parental Lock screen.* ( Off)

(See <Parental Level Setup>, page 69)

9 Keep "Auto" to use.*

⁄

•

* Disabled when a DVD is being played.

1 Enters a language code.

2 Cancels the language setup and returns to

the DVD SETUP 1 screen.

3 Sets the original audio language.

(It appears during Audio Language setup.)

4 Sets the language and returns to the DVD

SETUP 1 screen.

(It appears after you have entered a

language code.)

5 Clears the language code.

p Selects a picture display time. * ( Middle)

The Display of a JPEG picture is changed.

"Short", "Middle", "Long"

Enter a language code

See <DVD Language Codes> (page 97) and

select the desired language.

⁄

•

* Disabled when a DVD is being played.

KVT-719DVD/KVT-739DVD

Set the language you use

Enter the code number

⁄

•

The number you enter first is set as your code number.

You can clear the code number by pressing the Reset

button.

Parental Level Setup

Sets a parental level.

Display the Parental Level SETUP screen

Display the Parental Level code number

screen

Refer to <DVD Setup> (page 67) and touch

[Parental Level].

Select a parental level and complete the

setup

1 Enters a code number.

2 Cancels the current setup and returns to

the DVD SETUP 2 screen.

3 Indicates the present parental lock level.

4 Determines the code number and displays

the Parental Level setup screen.

5 Clears the code number.

6 Selects a parental level.

7 Complete the parental level setup and

returns to DVD SETUP 2 screen.

Next page 3

English

SETUP menu

Software Information

⁄

•

If a disc has higher parental lock level, you need to enter

Checks the software version of this unit.

the code number.

The parental lock level varies depending on a loaded

disc.

If a disc has no parental lock, anybody can play it back

even when you have set the parental lock.

Display the Software Information screen

Touch [Software Information] in the SETUP

Menu (page 66).

DivX Setup

Checks the registration code. This code is needed

when making an disc which has DRM (Digital

Rights Management).

Display the DivX SETUP screen

Touch [DivX SETUP] in the SETUP Menu (page

66).

1 Displays the software version.

2 Returns to the original screen.

iPod Setup

Performs setup when using iPod.

Display the iPod SETUP screen

Touch [iPod SETUP] in the SETUP Menu (page

66).

Setup each item

1 Displays the registration code.

2 Returns to the original screen.

⁄

•

When downloading a DivX VOD file controlled by DRM,

one above. Otherwise the file may not be able to play

with this unit.

Remaining number of viewing is displayed when playing

a DivX VOD file with the viewing restriction. When the

remaining number of viewing reached 0, a warning

message appears and the file cannot be played.

1 Sets the Audio book playback speed.

2 Sets Wide Screen on or off.

3 Returns to the original screen.

⁄

•

"Wide Screen" cannot be set while the iPod is connected.

KVT-719DVD/KVT-739DVD

System Setup

You can set up the system parameters.

Display the System SETUP screen

Touch [System SETUP] in the SETUP Menu

(page 66).

Setup each item

6 Select an illumination color of receiver

buttons. ( Red)

"Green": Green

"Red": Red

7 Return to the original screen.

1 Turns the key touch tone On or Off. ( On)

2 Allows scrolling of text display on the

Source Control screen. ( Auto)

"Auto":

Scrolls the screen automatically.

"Manual": Allows you to scroll the screen

manually.

3 Selects a remote control signal. ( On)

When turned "Off", the remote control of TV

reception is rejected.

4 Sets a music CD playback. ( 1)

"1": Automatically recognizes and plays

back an Audio file disc, a DVD or a

music CD.

"2": Forcibly plays back a disc as a music

CD. Select "2" if you wish to play a

music CD having a special format or

if you cannot play a disc in the "1"

position.

5 Return to the original screen.

⁄

•

You cannot play an Audio file/VCD disc in the "2"

position. Also, you may not play some music CDs in the

"2" position.

Your setup is disabled when the disc is being played.

English

SETUP menu

AV Interface Setup

You can set audio and visual (AV) interface

parameters.

Display the AV Interface screen

Touch [AV Interface] in the SETUP Menu (page

66).

Setup each item

5 Selects an AV source to be output at the AV

OUTPUT port. ( AV-IN)

6 Sets a method to switch to the rear view

camera video display. ( Off)

"On": Switches to the rear view camera

video display when engaging the

shift knob of car to "Reverse".

"Off": Switches to the the rear view camera

video display when engaging the

shift knob of car to "Reverse" and

then pressing the [V.SEL] switch

1 Sets a name to be displayed when you

select a system that is connected via the AV

INPUT port. ( VIDEO)

⁄

several times.

•

If you have set the navigation system connection to "AV

- IN", the display is fixed to "NAV".

7 You can flip the left and right of the rear

view camera video display. Set to "Reverse"

and the the rear view will be displayed left

and right in mirror image on the screen.

2 Sets an image display of the system that is

connected via the AV INPUT port. ( Off)

"Off": When the image source is switched,

an image entered via the AV INPUT

port is displayed.

(

Off)

"On": When an image signal is entered

via the AV INPUT port, this image is

displayed.

3 Selects a navigation system connection.

(

RGB)

"RGB": Allows the Kenwood’s Navigation

System to connect via its interface

cable.

"AV-IN": Allows a third-party navigation

system to connect via the AV INPUT

port.

"Off": Must be used if no navigation system

is connected. (The navigation display

is cancelled when the AV source is

switched.)

4 Return to the original screen.

KVT-719DVD/KVT-739DVD

User Interface

You can set up user interface parameters.

Display the User Interface screen

Touch [User Interface] in the SETUP Menu

(page 66).

Setup each item

8 Selects speakers used for voice guidance of

the navigation system. ( F-Left)

"F-Left":

Uses the front left side speaker

for voice guidance.

"F-Right": Uses the front right side

speaker for voice guidance.

"Front All": Uses both front speakers for

voice guidance.

9 Adjusts the volume for voice guidance of

the navigation system. ( 21)

1 Selects the background to display.

"Change": Displays images entered into

this unit. Refer to <Background

Select> (page 76).

p Mutes the volume during voice guidance of

the navigation system. ( On)

When turned "On", the volume level drops

for voice guidance.

q Sets a selecting method of audio source

from the Navigation system.( Off)

"On": Allows you to select the audio

source input from the Navigation

system interface by pressing [SRC] or

selecting it on Source Select screen.

"Off": The audio source cannot be selected

using [SRC] or on Source Select

screen.

2 Enables entering or deleting of background

images into of from this unit.

Press

to enter the USB suspend

mode, and then remove the USB device.

"Memory": Enables entering of background

images. Refer to <Entering

background> (page 75).

"Delete": Enables deleting of background

image entered into this unit.

Refer to <Background Delete>

(page 75).

3 Sets whether to display the target when

touching the panel.

4 Returns to the original screen.

Next page 3

English

SETUP menu

p Sets an on-screen display of the TV screen.

Auto) (with the optional accessory TV

(

tuner connected only)

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when

you touch on the screen.

q Returns to the original screen.

5 Sets an on-screen display of the iPod

Playback screen. ( Auto)

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when

you touch on the screen.

6 Sets an on-screen display of the navigation

screen. ( Off)

"Auto": Information is displayed for 5

seconds when updated.

w Sets whether to display animation when

switching screens.

"Off": Information is not displayed.

7 Sets an on-screen display of the video

playback screen. ( Auto)

e Sets whether to display the name of the

, and

buttons on

the right side of the menu screen.

r Returns to the original screen.

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when

you touch on the screen.

8 Returns to the original screen.

9 Sets an on-screen display of the DVD

Playback screen. ( Manual)

"Auto": Information is displayed for 5

seconds when updated.

"Manual": Information is displayed when

you touch on the screen.

KVT-719DVD/KVT-739DVD

Entering background

Background Delete

Loads images for background.

Deletes the background image.

Connect the device which has the image to

load

Display Delete Image Select screen

Display the User Interface screen

Select the image to be deleted

Background Delete

Cancel

Select the image to load

10:10

Background Memory

Folder Select

usb1

sample images1

sample images2

sample images3

sample images4

sample images5

Root

Fol↑

1 Returns to the original screen.

Delete the image

Background Delete

1 Returns to Media Select screen.

2 Returns to the previous folder.

3 Scrolls the list.

Cancel

Load the image

10:10

Rotation Angle Select/Memory

Enter

Cancel

Confirm

10:10

Background Delete

aaaaa

Enter

Would You Like to delete

Background?

4 Rotates the image.

5 Returns to the Picture Select screen.

Yes

⁄

•

Refer to <About Picture files> (page 11) for readable

image specifications.

2 Returns to the Pictrue Select screen.

•

Up to 3 images can be loaded.

This operation is not possible when USB is selected as the

source.

English

SETUP menu

Background Select

Touch panel Adjustment

Selects a image for background.

You can adjust the touch panel operations.

Select Background Select screen

Display the Touch panel Adjustment

screen

Touch [Touch] in the SETUP Menu (page 66).

Start Touch panel setup

Select a image for background

10:10

Background Change

Default

Cancel

1 Returns to the original screen.

Adjust the Touch panel

Enter

1 Returns to the original screen.

2 Returns to the initial background.

Set the image as the background

10:10

Background Change

Follow the instruction on the screen and touch

the center of

Default

Cancel

2 Cancels the adjustment and returns to the

Touch Panel Adjust screen.

3 Resets to the initial status.

Enter

KVT-719DVD/KVT-739DVD

Clock Setup

You can adjust the clock time.

Display the Clock Setup screen

Touch [Clock] in the SETUP Menu (page 66).

Setup the Clock

1 Clock time display

2 Adjusts hours.

3 Adjusts minutes.

4 Sets "00" minute.

Setup examples: 3:00 — 3:29 \ 3:00

3:30 — 3:59 \ 4:00

5 Sets the clock time in synchronization with

the time data sent from the RDS station.

(

Off)

When turned "On", the synchronized mode

starts and the clock cannot be adjusted

manually.

6 Returns to the original screen.

Adjust the clock time

English

SETUP menu

Monitor Setup

You can adjust the position, picture quality and

the screen mode of the monitor.

Displaying the Monitor SETUP screen

Touch [Monitor SETUP] in the SETUP Menu

(page 66).

Setup each item

6 Monitor Angle Adjustment

7 Forward/Backward Monitor Position

Adjustment

8 Monitor Open/Close Setup

When turned "On", the monitor is opened

or closed automatically when you turn on

or off the ignition key.

9 Monitor Action Setup

1 Brightness Control

When set to "Quick", the monitor is opened

quickly.

Disabled if Auto Dimmer is On.

2 Contrast Control

p Returns to the original screen.

3 Black Level Adjustment

4 Auto Dimmer Setup

When turned "On", the display is dimmed

automatically when the ambient becomes

dark.

5 Returns to the original screen.

⁄

•

In this Screen Control screen, you can perform setups for

the menu screen. Setups for videos such as DVD can be

performed on the <Screen Control> (page 58).

q Selects a screen mode of the iPod Video

playback screen.

You can select any of the following screen

mode.

"FULL", "JUST", "ZOOM", "NORMAL"

w Selects a screen mode of the DVD playback

screen.

You can select any of the following screen

mode.

"FULL", "JUST", "ZOOM", "NORMAL"

e Selects a screen mode of the VIDEO

playback screen.

You can select any of the following screen

mode.

"FULL", "JUST", "ZOOM", "NORMAL"

r Returns to the original screen.

KVT-719DVD/KVT-739DVD

Full picture mode (FULL)

Zoom picture mode (ZOOM)

Justify picture mode (JUST)

Normal picture mode (NORMAL)

t Selects a screen mode of the rear view

camera (R-CAM) screen.

You can select any of the following screen

mode.

"FULL", "JUST", "ZOOM", "NORMAL"

y Selects a screen mode of the TV screen.

You can select any of the following screen

mode.

"FULL", "JUST", "ZOOM", "NORMAL"

u Returns to the original screen.

⁄

•

When you select the Menu, Easy Control screen, or

Navigation, the display is shown in the full-size display

mode automatically. The screen mode of these displays

cannot be changed.

The picture qua¡lity can be set for each source.

English

SETUP menu

Enter a security Code

Security Code Setup

You can set a security code to protect your

receiver system against theft.

⁄

•

When the Security Code function is activated, the code

cannot be changed and the function cannot be released.

Note, the Security Code can be set as the 4 digit number

of your choice.

Display the Security Code Setup screen

Input four-digit number.

Touch [Security] in the SETUP Menu (page 66).

Reenter the security code

1 Displays the Security code input screen.

2 Turns the DSI function on or off.

If turned "On", the burglar alarm lamp

flashes when the protection panel is

removed. ( On)

Reenter the same security code as that you

have entered in Step 3 for confirmation.

⁄

•

If you enter a different security code, the screen returns

to Step 3 (for the first code entry).

3 Returns to the original screen.

Start Security Code setup

Now, your security code is registered.

If you press the Reset button or if you

disconnect your receiver from the battery after

the code registration, you need to enter the

registered security code.

⁄

•

If you have already completed the code registration,

is displayed.

KVT-719DVD/KVT-739DVD

If you have pressed the Reset button or if

you have disconnected the Receiver from

battery...

Deactivating Security Code

To deactivate the Security Code function.

Display Security Code Setup screen

Enter the correct security code

Touch [Security] in the SETUP Menu (page 66).

Start to cancel a registration of the

Security Code

You must enter the same security code as that

you have entered in Step 3.

Enter the security code

Enter a security Code

Now, you can use your Receiver.

Input by four-digit number.

Now, your security code is cleared.

English

SETUP menu

SAT ESN Watch Setup

Setup Memory

You can display the SAT ID. (with the optional

accessory Satellite radio connected only)

Audio Set Up and AV Interface settings can be

memorized. The memorized settings can be

recalled at any time. For example, even when the

settings are cleared due to replacement of the

battery, the settings can be restored.

Display ESN Watch SETUP screen

Touch [SAT ESN Watch] in the SETUP Menu

(page 66).

Display the SETUP Memory screen

Verify ESN

Touch [SETUP Memory] in the SETUP Menu

(page 66).

1 Displays the Electronic Serial Number.

2 Returns to the original screen.

1 Locks the Audio Set Up and AV Interface

Lock

settings. When

is selected, you

cannot set the Audio Set Up and AV

Interface settings.

2 Memorizes or recalls the settings. To cancel

the function, touch

memorization, touch

.To cancel

The Setup Menu screen appears again.

3 Returns to the original screen.

Start Set Up Memory

KVT-719DVD/KVT-739DVD

When clearing the currently memorized

settings:

4 Recalls the memorized settings.

5 Memorizes the current Audio Set Up and AV

Interface settings.

Touching the screen displays a confirmation

6 Clears the currently memorized settings.

7 Returns to Set Up Memory screen.

Yes

message. Touch

. To cancel clearing,

touch

Memorize or recall the settings

Quit memorization/recalling of settings

When memorizing the Audio Set Up and AV

Interface settings:

If settings have already been memorized, a

Yes

confirmation message appears. Touch

To cancel memorization, touch

When recalling the memorized settings:

Touching the screen displays a confirmation

Yes

message. Touch

. To cancel recalling,

touch

English

Audio Control

Audio Control menu

Audio Control

Displays the Audio Control menu to set the sound

effect function of this unit.

You can adjust the front/rear and right/left audio

balance.

Display the control screen

Display Audio Control

Press several times until the control screen

appears.

Display the Audio Control menu

Touch [Audio Control] in the Audio Control

Menu (page 84).

Display the Audio Control screen

Select the Audio Control item

1 Adjusts the right and left volume balance.

2 Adjusts the front and rear volume balance.

3 Turns the Loudness control function On or

Off.

If turned "On", high and low tones are

automatically enhanced during low volume.

4 Displays the present source information.

The stream (Dolby Digital, dts, Linear PCM,

MPEG, MP3, WMA or AAC) is displayed.

5 Returns to the original screen.

1 Switches to the selected Audio Control

screen.

KVT-719DVD/KVT-739DVD

Equalizer Control

You can set up the equalizer.

Display Equalizer Control

6 Adjusts the bass boost of the B.M.S power

amplifier (optional accessory).

7 Sets the center frequency of bass boost you

have set for "AMP Bass".

Touch [Equalizer] in the Audio Control Menu

(page 84).

If you set the center frequency to "Low", it

will be dropped approximately 20% to 30%.

8 Adjusts the subwoofer volume.

9 Adjusts the volume of the present source

based on the difference level of original

volume.

Display the Equalizer screen

p Returns to the original screen.

⁄

•

If you have increased the volume first, then reduced the

volume using the "Vol. Offset", the sound generated if

you suddenly switch to another source may be extremely

loud.

1 Selects an equalizer curve type.

You can select any of the following

You may not set some models of power amp boost to

"+18". See the catalog or instruction manual of power

amplifier.

equalizer curves.

• "Natural"

• "Rock"

• "Pops"

• "Easy"

• "Top40"

• "Jazz"

2 Selects items to be adjusted for tone curve

setup.

If turned "Off", only Level can be setup for

tone curves.

3 Displays the Tone curve setup screen. (page

86)

4 Returns to the original screen.

English

Audio Control

Tone setup

Zone Control

You can set a Tone curve.

You can set the front and rear audio source.

Display the Tone screen

Display Zone Control

See <Equalizer Control> (page 85).

Touch [Zone Control] in the Audio Control

Menu (page 84).

Set the Tone

Set the Zone Control

1 Bass adjustment items are displayed.

2 Middle adjustment items are displayed.

3 Treble adjustment items are displayed.

4 Bass DC Extend settings (Only when Bass is

selected)

If turned "On", it extends the bass

center frequency to the low register by

approximately 20%.

5 Tone curve becomes flat.

6 Sets the Center frequency.

7 Sets the level.

8 Sets the Q factor. (Only Bass and Middle can

be set)

1 Turns the Zone Function (that sets different

source sounds for front and rear speakers)

On or Off.

2 Switches the front and rear audio sources.

(This button appears when the Zone

function is On.)

9 Returns to the original screen.

Use "Reverse" to change over the front and

rear audio sources.

3 Sets the front and rear audio source

separately.

(This button appears when the Zone

function is On.)

KVT-719DVD/KVT-739DVD

⁄

•

When the rear speaker sound is switched, the audio

source that is output at the AV OUTPUT terminal is also

switched to the same source.

However, if you have set the "Area" to "Reverse", the

audio source that is output at the AV OUTPUT terminal is

switched depending on the front sound source.

4 Adjusts the volume of the rear channel.

(This button appears when the Zone

function is On.)

5 Returns to the original screen.

⁄

•

There are following limitations when zone function is set

to "On".

- There is no output from the subwoofer.

- <Audio Setup> (page 66) and <Equalizer Control>

(page 85) are not available.

English

Remote Controller

This unit can be operated using the Remote Controller supplied with the unit.

•

Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could

result, if the Remote Controller falls down and gets wedged under the pedals while driving.

Do not place the battery near an open flame or heat source. This may cause the battery to explode.

Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak

fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.

Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a

physician.

•

Battery installation

Remote Controller mode switch

Use two "AAA"/"R03"-size batteries.

Slide the cover while pressing downwards to

remove it as illustrated.

The functions operated from the remote

controller differ depending on the position of the

mode switch.

Insert the batteries with the + and – poles aligned

properly, following the illustration inside the case.

AUD mode

Switch to this mode when

controlling a selected source

or a CD changer etc.

AUD

DVD

T V

•

DVD mode

NTER

Switch to this mode when

playing DVDs or CDs etc.

with the player integrated in

this unit.

TV mode

This is switched when

controlling TV.

⁄

•

If the Remote Controller operates only over shorter

distances or does not operate at all, it is possible that

the batteries are depleted. In such instances, replace the

both batteries with new ones.

•

The position of the remote control mode switch is

indicated in the title of each mode, e.g., "(AUD mode)".

When controlling a player that is not integrated in the

unit, select "AUD" mode.

KVT-719DVD/KVT-739DVD

OPEN

Common operations (AUD mode)

Opens or closes the monitor each time you press

Source switching

Switches to the source to be played.

the key.

AUD•

DVD•

T V•

ENTER

DISP

SRC

V.SEL

AM−

OPEN

MODE FNC/PBC

VOL

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

ꢀꢃ

ꢄ

Cursor key

Volume control

Adjusts the volume.

Moves the cursor when displaying menu.

ꢀꢃ

ꢄ

AUD•

DVD•

T V•

ENTER

AM−

OPEN

VOL

ꢅ

ꢁ

AM−

OPEN

2ZONE

2^ABC3DEF

ENTER

Enters options.

Volume attenuator

Press the key once to lower the volume. Press again

ꢀꢃ

ꢄ

to restore the previous volume.

AUD

DVD

T V

•

R.VOL

ENTER

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

AM−

OPEN

Hands-free communication

Enters the dialing method selection mode.

Dual Zone

Switches the Dual Zone function ON and OFF.

When a call comes in, it answers the call.

−

OPEN

VOL

AM−

OPEN

ꢅ

ꢁ

VOL

ꢅ

ꢁ

2ZONE

2^ABC3DEF

ꢂ

2ZONE

ꢁ

2^ABC3DEF

4GHI 5JKL 6MNO

ꢂ

R.VOL

ꢁ

Function

Rear volume control

Switches the function screen.

Adjusts volume at rear when the Dual Zone

function is ON.

DISP

2ZONE

2^ABC3DEF

SRC

V.SEL

ꢂ

MODE FNC/PBC

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

7PQRS 8^TUV9WXYZ

ꢀꢃ

ꢄ

CLEAR

DIRECT

ATT

MODE

Switches the screen mode.

Screen mode changes each time you press this key.

V.SEL

Switch video

Switches the video each time it is pressed.

DISP

SRC

V.SEL

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

AUDIO

SUBTITLE

ꢀꢃ

ꢄ

ꢀꢃ

ꢄ

English

Remote Controller

DVD/VCD/CD/Audio files (DVD mode)

Track number

Play time

Cancel

Folder search

Selects the folder to be played.

AM−

OPEN

VOL

Audio files

ꢅ

ꢁ

Folder number

File number

Cancel

2ZONE

2^ABC3DEF

ꢂ

Track search and file search

Selects the track or file to be played.

VCD 1.X, VCD 2.X (PBC OFF)

AM−

OPEN

VOL

Track number

Cancel

ꢅ

ꢁ

2ZONE

2^ABC3DEF

ꢂ

VCD 2.X (PBC ON)

Play/Pause

Pauses the track.

Press again to resume playing.

Scene number

Number

Cancel

TOP MENU

AUDIO

DVD SETUP

ANGLE

RETURN

SUBTITLE

ZOOM

Once you have switched to the direct search

feature, specify the search number from the

ꢀꢃ

ꢄ

AUD

•

DVD

T V

ENTER

numeric keypad, and then press

[ENTER] key.

Stop

Numeric keypad

Memorizes the last point where the disc stopped.

When pressed again, the last point is deleted.

ꢁ

2ZONE

2^ABC3DEF

ꢂ

ꢁ

R.VOL

ꢀ

TOP MENU

AUDIO

DVD SETUP

ANGLE

RETURN

ZOOM

4GHI 5JKL 6MNO

SUBTITLE

7PQRS 8^TUV9WXYZ

ꢀꢃ

ꢄ

CLEAR

DIRECT

ATT

AUD

•

DVD

T V

ENTER

•

Specify the number to search in direct search.

Direct search

2ABC

Press

to fast forward/backward.

R.VOL

Switches the fast forward/backward speed each

time you press this key.

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

•

Press

4GHI

5JKL

to slow forward/backward.

Switches the slow playback speed each time you

press this key.

Pressing this button switches the features that can

be searched directly.

DVD Top Menu

Returns to the DVD top menu.

DVD

DISP

SRC

V.SEL

Title number

Chapter number

Play time

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

ꢀꢃ

ꢄ

Item number*

Cancel

* You may not be able to use this function with some discs

or scenes.

KVT-719DVD/KVT-739DVD

DVD Menu

Displays the DVD menu.

TV (TV mode)

Switching Band/Video

It switches between the station of the TV band to

Turns the playback control on or off while playing

VCD.

receive and video input.

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AM−

OPEN

VOL

AUDIO

SUBTITLE

ꢅ

ꢁ

ꢀꢃ

ꢄ

2ZONE

2^ABC3DEF

ꢂ

Subtitle

Switches the subtitle language.

Channel Selection

DISP

The TV channel to receive is selected.

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AM−

OPEN

AUDIO

SUBTITLE

VOL

ꢅ

ꢁ

ꢀꢃ

ꢄ

2ZONE

2^ABC3DEF

ꢂ

Zoom

Direct tuning

Switches the zoom ratio each time you press this

key.

R.VOL

7PQRS 8^TUV9WXYZ

ꢀ

DISP

CLEAR

DIRECT

ATT

SRC

V.SEL

MODE FNC/PBC

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

AUDIO

SUBTITLE

ꢀꢃ

ꢄ

Press this key first, and then specify the station to

receive with the numeric keypad.

ANGLE

Picture Angle

Example: In case of Channel 6 (2-digit)

6MNO

Switches the picture angle each time you press this

key while an angle mark is displayed.

Numeric keypad

DISP

ꢁ

SRC

V.SEL

2ZONE

2^ABC3DEF

MODE FNC/PBC

ꢂ

TOP MENU

DVD SETUP

ANGLE

RETURN

ZOOM

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

AUDIO

SUBTITLE

7PQRS 8^TUV9WXYZ

ꢀꢃ

ꢄ

CLEAR

DIRECT

ATT

AUDIO

Switch Voice Language

•

The number of the memorized station is

selected. (

–

6MNO

)

Switches the voice language each time you press

this key.

Press the direct tuning key first, then specify the

channel of the station to receive.

DISP

SRC

V.SEL

MODE FNC/PBC

TOP MENU

AUDIO

DVD SETUP

ANGLE

RETURN

ZOOM

SUBTITLE

ꢀꢃ

ꢄ

English

Remote Controller

Radio (AUD mode)

Band switching

Switches to bands received by the unit.

AM−

OPEN

VOL

ꢅ

ꢁ

2ZONE

2^ABC3DEF

ꢂ

Station selection

Switches to broadcast stations received by the unit.

AM−

OPEN

VOL

ꢅ

ꢁ

2ZONE

2^ABC3DEF

ꢂ

Direct tuning

After pressing this key, use the keypad to specify

the broadcast station you wish to receive.

R.VOL

7PQRS 8^TUV9WXYZ

ꢀ

CLEAR

DIRECT

ATT

Example: 92.1MHz (FM)

9WXYZ

2ABC

Example: 810kHz (AM)

8TUV

Numeric keypad

ꢁ

2ZONE

2^ABC3DEF

ꢂ

ꢁ

R.VOL

ꢀ

4GHI 5JKL 6MNO

7PQRS 8^TUV9WXYZ

CLEAR

DIRECT

ATT

•

To use preset tuning, press the number of a

programmed broadcast station. (

–

6MNO

)

Press the direct tuning key first, then specify the

frequency of the station to receive.

KVT-719DVD/KVT-739DVD

English

Help?

Troubleshooting

Some functions of this unit may be disabled by

some settings made on this unit.

What might seem to be a malfunction in your unit

may just be the result of slight misoperation or

miswiring. Before calling service, first check the

following table for possible problems.

• Cannot set up the subwoofer.

• Cannot set up subwoofer phase.

• No output from the subwoofer.

• Cannot set up the low pass filter.

• Cannot set up the high pass filter.

General

The Touch Sensor Tone doesn’t sound.

✔

The preout jack is being used.

Subwoofer is not set to On. ☞ <Audio Setup>

(page 66)

☞

The Touch Sensor Tone can’t be output from

the preout jack.

The Dual zone function is enabled. ☞ <Zone

Control> (page 86)

Tuner source

Cannot set up the subwoofer phase.

Subwoofer is not set to On. ☞ <Audio Setup>

(page 66)

Radio reception is poor.

✔

The car antenna is not extended.

Pull the antenna out all the way.

☞

Low pass filter is set to Through. ☞ <Crossover

Network Setup> (page 67)

✔

The antenna control wire is not connected.

☞

Connect the wire correctly, referring to the

section on <INSTALLATION MANUAL>.

• Cannot select the output destination of the

subsource in the Dual zone.

• Cannot adjust the volume of the rear

speakers.

The Dual zone function is disabled. ☞ <Zone

Control> (page 86)

Disc source

The specified disc does not play, but another

one plays instead.

✔

The specified CD is quite dirty.

Clean the CD.

☞

Cannot play audio files.

"CD Read" of <System Setup> (page 71) is set

to "2".

✔

The disc is loaded in a different slot from that

specified.

☞

Eject the disc magazine and check the

number for the specified disc.

Cannot Folder select.

The Scan play or Random play function is

enabled.

✔

The disc is severely scratched.

Try another disc instead.

☞

Cannot perform Repeat play.

The PBC function is enabled.

Audio file source

The sound skips when an Audio file is being

played.

• The Traffic Information setting is ineffective.

• The Synchronize Clock setting is ineffective.

• Cannot select the tuner as a Dual zone

source.

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD

cleaning of the section on <Handling CDs>

(page 8).

HD Radio is in use.

✔

The recording condition is bad.

• Cannot set up the equalizer.

☞

Record the media again or use another

media.

• Cannot set up the crossover network.

The Dual zone function is enabled. ☞ <Zone

Control> (page 86)

KVT-719DVD/KVT-739DVD

HD Radio source

No sound can be heard, or the volume is low.

✔

The preset broadcast station is not

transmitting in the mode that was set with

<HD Radio Control> (page 52).

☞

✔

Please set <Receive mode Setting> to

"Auto".

In digital AM broadcasting, receive mode

switches between stereo and monaural too

often.

☞

Receiving condition is bad or unstable.

Stereo is chosen when receiving condition is

good, and it switches to monaural when the

condition becomes bad.

✔

HD Radio tuner is connected to KCA-S220A

or other units.

☞

Connect the HD Radio tuner directly to this

unit.

English

Help?

Error

Error 07–67:

When the unit fails to operate correctly, the

cause of the failure appears on the display.

The unit is not operating correctly due to some reason

or other.

Protect :

➡ Push the unit's Reset button. If the "Error 07−67"

message does not disappear, see your nearest

Kenwood dealer.

Protective circuit has been activated because a speaker

cord has shorted or it has come in contact with the car

chassis.

No Device (USB device)/Disconnected (iPod):

The USB device/iPod is selected as a source although

no USB device/iPod is connected.

➡ Change the source to any source other than

USB/iPod. Connect an USB device/iPod, and

change the source to USB/iPod again.

➡ Wire or insulate the speaker cord as appropriate

and then push the Reset button.

Hot Error :

When the internal temperature of this unit rises to 60°C

or more, the protection circuit is activated and you

may not be able to operate the unit. At such times this

message will appear.

No Music:

➡ Use the unit again after reducing the

temperature inside the vehicle.

The connected USB device contains no playable audio

file.

Media was played that doesn’t have data recorded that

the unit can play.

Hold Error :

Activation of the protective circuit when the

temperature inside the disc changer is higher than 60

degrees Celsius stops the disc changer from operating.

At such times this message will appear.

USB Device Error!!:

The connected USB device is rated a current capacity

higher than the allowable limit.

➡ Use when the temperature at the site where the

disc changer has been fitted has dropped.

➡ Check the USB device.

Some trouble may have occurred to the connected

USB device.

➡ Change the source to any source other than USB.

Remove the USB device.

Mecha Error :

The disc player is malfunctioning.

➡ Eject the disc and try inserting it again. Contact

the Kenwood dealer if this indicator continues

blinking or the disc cannot be ejected.

Authorization Error:

Connection to the iPod has failed.

➡ Remove the iPod and then reconnect it.

The unit does not support the iPod.

➡ Refer to <About iPod that can be connected to

this unit> (page 7).

Disc Error :

An unplayable disc is inserted.

Read Error :

• Disc is quite dirty.

Update your iPod:

➡ Clean the disc, referring to the section on

<Handling CDs> (page 8).

The iPod's software is an older version which the unit

can not support.

➡ Confirm that the software for the iPod is the

latest version. Refer to <About iPod that can be

connected to this unit> (page 7).

• Disc is upside down.

➡ Load the disc with the labeled side up.

Region code Error :

The disc you wanted to play has a region code that

cannot be played with this unit.

Parental level Error:

The disc you wanted to play has a higher level than the

parental level you set.

KVT-719DVD/KVT-739DVD

DVD Language Codes

Code

Language

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Code

Language

Icelandic

Italian

Japanese

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Luxembourgish

Lingala

Laotian

Lithuanian

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Code

Language

Singhalese

Slovak

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tongan

Turkish

Tsonga

Tatar

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faroese

French

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

gli

Polish

Pashto, Pushto

Portuguese

Quechua

Rhaeto-Romance

Kirundi

Hebrew

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Romanian

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo-Croatian

English

Specifications

Monitor section

USB IF section

Picture size

USB Standard

: 6.97 inches (diagonal) wide

154.1 x 87.1 mm

: USB 1.1 / 2.0

File System

Display system

: FAT 16/32

: Transparent TN LCD panel

Maximum Power Supply Current

Drive system

: 500mA

: TFT active matrix system

D/A Converter

Number of pixels

: 24Bit

: 336,960 (480H×234V×RGB)

Decoder

Effective pixels

: MP3/WMA/AAC

: 99.99%

Pixel arrangement

: RGB striped arrangement

Back lighting

: Cold Cathode Fluorescent Tube

FM tuner section

Frequency Range

: 87.9– 107.9MHz (200kHz)

Usable Sensitivity (S/N : 26 dB)

: 9.3 dBf (0.8μv/75Ω)

Quieting Sensitivity (S/N : 46 dB)

DVD section

D/A Converter

: 15.2 dBf (1.6 μV/75 Ω)

: 24 bit

Frequency Response ( 3.0 dB)

Decoder

: 30 Hz – 15 kHz

: Linear PCM/ Dolby Digital/ dts/MP3/ WMA/AAC

S/N

Wow & Flutter

: 70dB(MONO)

: Below Measurable Limit

Selectivity ( 400 kHz)

Frequency Response

: ≥ 80 dB

Sampling frequency; 96 kHz : 20 – 44,000 Hz

Sampling frequency; 48 kHz : 20 – 22,000 Hz

Sampling frequency; 44.1 kHz : 20 – 20,000 Hz

Stereo Separation

: 40dB(1kHz)

Total Harmonic Distortion

: 0.01% (1 kHz)

S/N Ratio (dB)

: 98dB(DVD-Video 96k)

Dynamic Range

: 98dB(DVD-Video 96k)

AM tuner section

Frequency Range (10 kHz)

: 530kHz – 1700kHz

Usable Sensitivity

: 28dBμ

DISC Format

: DVD-Video/VIDEO-CD/CD-DA

Sampling frequency

: 44.1kHz/48kHz/ 96kHz

Quantifying bit number

: 16/ 20/ 24 bit

KVT-719DVD/KVT-739DVD

Video section

General

Color system of external video input

Operating voltage

: NTSC

: 14.4 V (11 – 16 V allowable)

External video input level (RCA jacks)

Current Consumption

: 1Vp-p/75Ω

: 15 A

External audio max input level (RCA jacks)

: 2V/25kΩ

Installation Size (W × H × D)

Main Unit:

: 182 × 53 × 161mm

7-3/16 × 2-1/16 × 6-3/8 inch

Hideaway unit:

: 228 x 40 x176 mm

9 x 1-9/16 × 6-15/16 inch

Analog RGB input

: 0.7Vp-p/75Ω

Video Output level (RCA jacks)

: 1Vp-p/75Ω

Audio Output level (RCA jacks)

: 1.2V/10kΩ

Operational Temperature Range

: -10 °C – +60 °C

Storage Temperature Range

: -20 °C – +85 °C

Audio section

Maximum Power (Front&Rear)

: 50W×4

Full Bandwidth Power (Front&Rear)

(4Ω,14.4V,1%THD)

Weight

Main unit: 2.2 kg (4.9 lbs)

Hideaway unit: 1.1 kg (2.4 lbs)

: 22W×4

Preout level (V)

: 2V/10kΩ

Preout impedance

: ≤ 600 Ω

Speaker impedance

: 4 – 8Ω

Tone action

Bass: 100 Hz 8 dB

Middle: 1 kHz 8 dB

Treble: 10 kHz 8 dB

Specifications subject to change without notice.

Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light

incorrectly.

English

2CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation

exposure.

In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product

safety.

Kenwood Corporation

2967-3, ISHIKAWA-MACHI,

HACHIOJI-SHI

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS N0.21 CFR

1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful

interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to

operate this equipment if an unauthorized change or modification is made.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The "AAC" logo is trademark of DolbyLaboratories.

Apple, the Apple logo, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries.

DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.

is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property

rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

"DTS" and "DTS 2.0 + Digital Out" are trademarks of Digital Theater Systems, Inc.

Toshiba Carrier Rav Sp360ct Ul User Manual
Toshiba Air Conditioner Mmy Map1604ht8 E User Manual
Sharp Mx M950 User Manual
Sharp Mx B402 User Manual
Sanyo Khs2672r User Manual
MAKITA G12000R User Manual
LG LDE3015ST User Manual
Lanier 5505 User Manual
BROTHER HL L2360DN User Manual
ACER AW314 User Manual