User’s Guide
NPD4962-00 EN
AL-MX300 Series User's Guide
Marigold and Oxford are trademarks of AlphaOmega Typography.
Coronet is a registered trademark of Ludlow Type Foundry.
Eurostile is a trademark of Nebiolo.
Bitstream is a registered trademark of Bitstream Inc. registered in the United States Patent and Trademark Office and may be
registered in certain jurisdictions.
Swiss is a trademark of Bitstream Inc. registered in the United States Patent and Trademark Office and may be registered in
certain jurisdictions.
HP and HP LaserJet are registered trademarks of the Hewlett-Packard Company.
PCL is the registered trademark of Hewlett-Packard Company.
Adobe, the Adobe logo, PostScript3, and Adobe Acrobat are trademarks of Adobe Systems Incorporated, which may be
registered in certain jurisdictions.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective
owners. Epson disclaims any and all rights in those marks.
Copyright © 2013 Seiko Epson Corporation. All rights reserved.
Copyright and Trademarks
3
AL-MX300 Series User's Guide
Operating System Versions
In this manual, the following abbreviations are used.
Windows refers to Windows 8, 8 x64, 7, 7 x64, Vista, Vista x64, XP, XP x64, Server 2012 x64, Server 2008, Server 2008 x64,
Server 2008 R2, Server 2003, and Server 2003 x64.
❏
❏
❏
Windows 8 refers to Windows 8, Windows 8 Pro, Windows 8 Enterprise.
Windows 8 x64 refers to Windows 8 x64, Windows 8 Pro x64, Windows 8 Enterprise x64.
Windows 7 refers to Windows 7 Ultimate Edition, Windows 7 Home Premium Edition, Windows 7 Home Basic
Edition, and Windows 7 Professional Edition.
❏
❏
❏
Windows 7 x64 refers to Windows 7 Ultimate x64 Edition, Windows 7 Home Premium x64 Edition, Windows 7
Home Basic x64 Edition, and Windows 7 Professional x64 Edition.
Windows Vista refers to Windows Vista Ultimate Edition, Windows Vista Home Premium Edition, Windows Vista
Home Basic Edition, Windows Vista Enterprise Edition and Windows Vista Business Edition.
Windows Vista x64 refers to Windows Vista Ultimate x64 Edition, Windows Vista Home Premium x64 Edition,
Windows Vista Home Basic x64 Edition, Windows Vista Enterprise x64 Edition and Windows Vista Business x64
Edition.
❏
❏
❏
❏
Windows XP refers to Windows XP Home Edition and Windows XP Professional.
Windows XP x64 refers to Windows XP Professional x64 Edition.
Windows Server 2012 x64 refers to Windows Server 2012 Essentials Edition, Server 2012 standard Edition.
Windows Server 2008 refers to Windows Server 2008 Standard Edition and Windows Server 2008 Enterprise
Edition.
❏
❏
❏
Windows Server 2008 x64 refers to Windows Server 2008 x64 Standard Edition, Windows Server 2008 x64
Enterprise Edition, Windows Server 2008 R2 Standard Edition, and Windows Server 2008 R2 Enterprise Edition.
Windows Server 2003 refers to Windows Server 2003 Standard Edition and Windows Server 2003 Enterprise
Edition.
Windows Server 2003 x64 refers to Windows Server 2003 x64 Standard Edition and Windows Server 2003 x64
Enterprise Edition.
Mac OS refers to Mac OS X.
Mac OS X refers to Mac OS X 10.5.8 or later.
❏
Operating System Versions
4
AL-MX300 Series User's Guide
Contents
Contents
5
AL-MX300 Series User's Guide
Contents
6
AL-MX300 Series User's Guide
Copy mode menu list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Contents
7
AL-MX300 Series User's Guide
Canceling a Copy Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Confirming settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Sending Faxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Loading documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Manual faxing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Sending faxes using speed-dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Sending faxes using quick-dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Canceling faxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Receiving Faxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Basics of receiving faxes (automatic receiving). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Output paper size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Receiving faxes after you hear fax tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Sending received faxes to memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Forwarding a received fax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Using Advanced Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Displaying memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Using the Address Settings menu on the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Contents
8
AL-MX300 Series User's Guide
Selecting a Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Using the Control Panel Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Accessing the each menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Language Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
System Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
System Report Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Common Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Network Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
USB Host Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Reset Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Printer Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
PCL Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
FX Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
High Compression. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Standard Copy Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Scan Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Network Scan Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
E-mail Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Buffer Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Fax Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Communication Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Contents
9
AL-MX300 Series User's Guide
Detail Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Address Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
E-mail Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Folder Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Admin Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Support Mode Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Status and Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Printing and Deleting Reserve Job Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Installing the optional paper cassette unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Precautions During Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Replacement Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Cleaning the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Cleaning the pickup roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Cleaning the ADF pickup roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
For short distances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Contents 10
AL-MX300 Series User's Guide
Clearing Jammed Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Precautions for clearing jammed paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Paper Jam B (Cover B). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
The Print LED does not turn on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
The Print LED is on but nothing prints. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
The optional product is not available. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
The remaining service life of the consumable products is not updated (Windows only). . . . . . . 222
The font cannot be printed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Printout is garbled. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
The printout position is not correct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
The background is dark or dirty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Dots appear in the printout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Print quality or tone is uneven. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Toner smudges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
The non-printed side of the page is dirty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Insufficient memory for current task. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Paper Handling Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Problems Using Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Contents 11
AL-MX300 Series User's Guide
Correcting USB Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Windows operating system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Status and Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Canceling or Interrupting Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Canceling printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Interrupting printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Printing in the PostScript 3 Mode Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
The printer does not print correctly in the PostScript mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
The printer does not print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
The printer fonts cannot be installed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
The edges of texts and/or images are not smooth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
The printer does not print normally via the network interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Scanning Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Scanning software problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Copy operational problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
Faxing Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Sending and receiving faxes problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Using the Printer Software for Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Using the printer driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Uninstalling the printer software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Contents 12
AL-MX300 Series User's Guide
System requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Using the PostScript printer driver with Mac OS X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Using the PCL Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Available paper types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
Paper that should not be used. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
Printable area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Standard and approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
USB Host interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Ethernet interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Optional paper cassette unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
Toner cartridge/Return toner cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Photoconductor Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Fuser Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Before Contacting Epson. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Help for Users in Europe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Contents 13
AL-MX300 Series User's Guide
ArcFour. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Contents 14
AL-MX300 Series User's Guide
Safety Instructions
Warning, Caution, Important and Note
Warning
!
must be followed carefully to avoid serious bodily injury.
Caution
!
must be observed to avoid bodily injury.
Important
c must be observed to avoid damage to your equipment.
Note
contains important information and useful tips on the operation of your printer.
Important Safety Instructions
Setting up the printer
❏ Because the printer weighs approximately 18.8 kg (41.4 lb) for the DN model or 19.0 kg (41.9 lb)
for the DNF model with consumable products installed, one person should not lift or carry it. Two
people should carry the printer, lifting it by the correct positions as shown below.
❏ When moving the printer, always keep it horizontal.
Safety Instructions 15
AL-MX300 Series User's Guide
❏ If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
❏ Be sure the AC power cord meets the relevant local safety standards. Use only the power cord that
comes with this printer. Use of the another cord may result in fire or electric shock. This printer’s
power cord is for use with this printer only. Use with other equipment may result in fire or electric
shock.
❏ If damage occurs to the plug, replace the cord set or consult a qualified electrician. If there are fuses
in the plug, make sure you replace them with fuses of the correct size and rating.
❏ Use a grounded outlet that matches the printer’s power plug. Do not use an adapter plug.
❏ Avoid using an electrical outlet that is controlled by wall switches or automatic timers. Accidental
disruption of power can erase valuable information in your computer’s and printer’s memory.
❏ Make sure that there is no dust on the socket.
❏ Be sure to insert the plug completely into the electrical outlet.
❏ Do not handle the plug with wet hands.
❏ Unplug this printer from the wall outlet and refer servicing to a qualified service representative
under the following conditions:
A
B
When the power cord or plug is damaged or frayed.
If liquid has been spilled into it.
C
D
If it has been exposed to rain or water.
If it does not operate normally when the operating instructions are followed. Adjust only those controls that
arecoveredbytheoperatinginstructionssinceimproperadjustmentofothercontrolsmayresultindamage
and will often require extensive work by a qualified technician to restore the printer to normal operation.
E
F
If it has been dropped or the cabinet has been damaged.
If it exhibits a distinct change in performance, indicating a need for service.
❏ Avoid sharing outlets with other appliances.
❏ Connect all equipment to properly grounded power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that regularly switch on and off.
❏ Connect your printer to an electrical outlet that meets the power requirements of this printer.
Your printer’s power requirements are indicated on a label attached to the printer. If you are not
sure of the power supply specifications in your area, contact your local power company or consult
your dealer.
Safety Instructions 16
AL-MX300 Series User's Guide
❏ If you use an extension cord, make sure that the total of the ampere ratings on the products
plugged into the extension cord does not exceed the extension cord ampere rating.
❏ When connecting this printer to a computer or other device with a cable, ensure the correct
orientation of the connectors. Each connector has only one correct orientation. Inserting a
connector in the wrong orientation may damage both devices connected by the cable.
❏ Use only optional products, such as the paper cassette units and the printer stand, produced
specifically for this product. Using options produced for other products may cause the product to
fall over and injure someone.
Finding the place for the printer
When relocating the printer, always choose a location that has adequate space for easy operation and
maintenance. Use the following illustration as a guide for the amount of space required around the
printer to ensure smooth operation.
a.
c.
e.
35 cm
10 cm
93 cm
b.
d.
f.
40 cm
60 cm
40 cm
Safety Instructions 17
AL-MX300 Series User's Guide
To install and use any of the following options, you will need the indicated amount of additional
space.
A 250-Sheet Paper Cassette Unit adds 6.5 cm to the bottom of the printer.
In addition to space considerations, always heed the following precautions when finding a place to
locate the printer:
❏ Place the printer near an electrical outlet where you can easily plug in and unplug the power cord.
❏ Do not put your printer where the cord will be stepped on.
❏ Do not use printer in a damp environment.
❏ Avoid locations that are subject to direct sunlight, excessive heat, moisture, oil vapor, or dust.
❏ Do not place the printer on an unstable surface.
❏ Slots and openings in the cabinet and the back or bottom are provided for ventilation. Do not
block or cover them. Do not put the printer on a bed, sofa, rug, or other similar surface or in a
built-in installation unless proper ventilation is provided.
❏ Keep the entire computer and printer system away from potential sources of interference, such as
loudspeakers or the base units of cordless telephones.
❏ Leave adequate room around the printer to allow for sufficient ventilation.
Safety Instructions 18
AL-MX300 Series User's Guide
Using the printer
❏ Be careful not to touch the fuser, which is marked with a caution label, or the surrounding areas. If
the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch
one of these areas, wait 40 minutes to allow the heat to subside before doing so.
* caution label
❏ Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
❏ Never push objects of any kind through cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock.
❏ Do not sit or lean on the printer. Do not put heavy objects on the printer.
❏ Do not use any kind of combustible gases in or around the printer.
❏ Never force the printer’s components into place. Although the printer is designed to be sturdy,
rough handling can damage it.
❏ Do not leave jammed paper inside the printer. This can cause the printer to overheat.
❏ Never spill liquid of any kind on the printer.
❏ Adjust only those controls that are covered by the operating instructions. Improper adjustment of
other controls may result in damage and may require repair by a qualified service representative.
Safety Instructions 19
AL-MX300 Series User's Guide
❏ Do not turn off the printer:
-Afterturningontheprinter, waituntilthefollowingscreenappearsontheLCDpanel. Thescreen
varies depending on which mode is selected for Default Modein the Admin Settingsmenu.
Mode
Copy
Scan
Print
Fax
Message
Ready to Copy
Specify scan address.
Ready
Specify the address
-While the Data light is on or flashing.
-While printing.
❏ Avoid touching the components inside the printer unless instructed to do so in this guide.
❏ Follow all warnings and instructions marked on the printer.
❏ Except as specifically explained in the printer’s documentation, do not attempt to service this
product yourself.
❏ Periodically disconnect the plug from the electrical outlet and clean the blades.
❏ Do not disconnect the plug while the printer is on.
❏ If the printer will not be used for a long time, disconnect the plug from the electrical outlet.
❏ Unplug this printer from the wall outlet before cleaning.
❏ Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.
Handling the consumable products and maintenance parts
❏ Do not burn used consumable products or maintenance parts because they might explode and
injure someone. Dispose of them according to local regulations.
❏ Be sure to keep consumable products and maintenance parts out of the reach of children.
❏ When handling a toner cartridge, always place it on a clean, smooth surface.
❏ Do not attempt to modify or take it apart consumable products or maintenance parts.
Safety Instructions 20
AL-MX300 Series User's Guide
❏ Do not touch the toner. Always keep toner away from your eyes. If toner gets on your skin or
clothes, wash it off with soap and water immediately.
❏ If toner is spilled, use a broom and dustpan or a damp cloth with soap and water to clean it up.
Becausethefineparticlescancauseafireorexplosioniftheycomeintocontactwithaspark, donot
use a vacuum cleaner.
❏ Wait at least one hour before using a toner cartridge after moving it from a cool to a warm
environment to prevent damage from condensation.
❏ To get the best print quality, do not store the toner cartridge or photoconductor unit in an area
subject to direct sunlight, dust, salty air, or corrosive gases (such as ammonia). Avoid locations
subject to extreme or rapid changes in temperature or humidity.
❏ When removing the photoconductor unit, do not expose it to sunlight at all and avoid exposing it
to room light for more than three minutes. The photoconductor unit contains a light-sensitive
drum. Exposure to light can damage the drum, causing dark or light areas to appear on the printed
page and reducing the service life of the drum. If you need to keep the photoconductor unit out of
the printer for long periods, cover it with an opaque cloth.
❏ Be careful not to scratch the surface of the drum. When you remove the photoconductor unit from
the printer, always place it on a clean, smooth surface. Avoid touching the drum, since oil from
your skin can permanently damage its surface and affect print quality.
❏ Do not touch the transfer roller on the transfer unit to avoid damaging it.
❏ Do not let the paper’s edge slide across your skin because the edge of the paper may cut you.
Safety Instructions 21
AL-MX300 Series User's Guide
Safety Information
Laser safety labels
Warning:
!
The performance of procedures and adjustments other than those specified in the printer’s
documentation may result in hazardous radiation exposure. Your printer is a Class 1 laser
product as defined in the IEC60825 specifications. The label similar to the one shown below is
attached to the back of the printer in countries where required.
Internal laser radiation
ThereisaClassIIIbLaserDiodeAssemblythathasaninvisiblelaserbeaminsidetheprinterheadunit.
The printer head unit is NOT A SERVICE ITEM, therefore, the printer head unit should not be
opened under any circumstances. An additional laser warning label is affixed to the inside of the
printer.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced
only when the printer is printing.
Ozone exposure limit
The Epson laser printer generates less than 1.5 mg/h of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
Safety Instructions 22
AL-MX300 Series User's Guide
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user’s face
❏ Vented directly out of the building whenever possible
Restrictions on Copying
Operatorsofthisprintermustobservethefollowingrestrictionsinordertoensuretheresponsibleand
legal use of this printer.
Copying of the following items is prohibited by law
❏ Bank bills, coins, government-issued marketable securities, government bond securities, and
municipal securities
❏ Unused postage stamps, pre-stamped postcards, and other official postal items bearing valid
postage
❏ Government-issued revenue stamps, and securities issued according to legal procedure
Exercise caution when copying the following items
❏ Private marketable securities (stock certificates, negotiable notes, checks, etc.), monthly passes,
concession tickets, etc.
❏ Passports, driver’s licenses, warrants of fitness, road passes, food stamps, tickets, etc.
Responsible use of copyrighted materials
Scanners can be misused by improperly copying copyrighted materials. Unless acting on the advice of
a knowledgeable attorney, be responsible and respectful by obtaining the permission of the copyright
holder before copying published material.
Safety Instructions 23
AL-MX300 Series User's Guide
Chapter 1
Getting to Know Your Printer
Printer Parts
Front view
ADF cover*
a
b
Auto Document Feeder (ADF)
c
paper support
d
f
face-down tray
cover A**
MP tray
e
standard lower paper cassette
g
i
h
USB Host interface
control panel***
*
Be sure to close the ADF cover when scanning a document on the document table.
Be sure to close cover A when scanning a document.
**
***The DNF model is shown in the illustration.
Getting to Know Your Printer 24
AL-MX300 Series User's Guide
Rear view
a
c
security slot
b
d
network interface connector
telephone interface connector*
USB interface connector
- LINE: Connects with the phone cord
- EXT: Connects with an external telephone
e
power switch
cover B
f
AC inlet
g
*
DNF model only
Getting to Know Your Printer 25
AL-MX300 Series User's Guide
Control panel
DN model
a
Use these buttons to switch to the corresponding mode.
Mode buttons/LEDs (Green)
b
Use this button to register frequently used settings for Copy mode and Scan
mode or to call up the settings.
Job Memory button
c
Use this button to switch to the setup mode.
Setting button
LCD panel
d
e
Displays printer status messages and control panel menu settings.
Use these buttons to access the control panel menus, where you can make
printer settings and check the status of consumable products. For instructions
on how to use these buttons, see “Using the Control Panel” on page 125.
OK button
Up button
Right button
Down button
Left button
f
Use this button to display the information registered in the address list.
Address-book button
g
Use this button to enter the power saving mode. This mode is canceled when
the buttonispressedagain. Thisbuttonlightsupwhentheprinterisinthesleep
mode (the deep sleep mode).
Power Saving button/LED
(Green)
For EU model, the printer has a power off mode which saves more power
consumption as almost all functions are not available. For more details about
the power off mode, see “Energy Saver Menu” on page 139.
h
When the printer is printing, pressing this button stops the printing.
Stop button
Getting to Know Your Printer 28
AL-MX300 Series User's Guide
i
Use this button to reset the selected setting item or mistakenly entered values
to the default value.
Reset button
j
Use this button to start a copy or scan.
Start button
k
Numeric key pad
Used to enter the number of copies or a zoom value in Copy mode. Also, enters
numeric values, such as the Time Setting in Setup Menu.
l
Use this button to clear the number of copies or delete a character when
entering a text or numbers.
Clear button
m
n
Use this button to check the status of print and copy jobs, the usage of
consumable products, and any warnings.
Status button
Data light (Green)
On when print data is stored in the print buffer (the section of printer memory
reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
o
p
q
On or flashes when an error has occurred.
Error light (Orange)
Return button
Use this button to return to a higher hierarchical level while doing settings.
Use this button to move to a menu displayed on the LCD panel.
Function buttons (F1 to F4)
DNF model
a
b
c
Use these buttons to transmit a fax to a registered fax number assigned to the
corresponding button.
Quick-Dial buttons (1 to 12)
Use this button to display the fax document list stored in the printer’s memory.
Fax Memory button/LED
(Green)
Use this button to register frequently used settings for Copy mode and Scan
mode or to call up the settings.
Job Memory button
Getting to Know Your Printer 29
AL-MX300 Series User's Guide
d
e
f
Use this button to switch to the setup mode.
Setting button
Mode buttons/LEDs (Green)
LCD panel
Use these buttons to switch to the corresponding mode.
Displays printer status messages and control panel menu settings.
g
Use these buttons to access the control panel menus, where you can make
printer settings and check the status of consumable products. For instructions
on how to use these buttons, see “Using the Control Panel” on page 125.
OK button
Up button
Right button
Down button
Left button
h
i
Use this button to switch between on-hook and off-hook.
Onhook button
Redial/Pause button
Use this button to redial to the same fax number called previously or to insert a
pause (-) when dialing a number.
j
Use this button to display the information registered in the address list.
Address-book button
k
Use this button to enter the power saving mode. This mode is canceled when
the buttonispressedagain. Thisbuttonlightsupwhentheprinterisinthesleep
mode (the deep sleep mode).
Power Saving button/LED
(Green)
l
When the printer is printing, pressing this button stops the printing.
Stop button
m
Use this button to reset the selected setting item or mistakenly entered values
to the default value. Also, use this button to delete one character from the
entered data when entering a recipient fax number in Fax mode.
Reset button
n
o
Use this button to start a copy, scan, or fax transmission.
Start button
Numeric key pad
Used to enter the number of copies or a zoom value in Copy mode. Also, enters
numeric values, such as the Time Setting in Setup Menu.
p
q
r
Use this button to clear the number of copies or delete a character when
entering a text or numbers.
Clear button
Use this button to check the status of print, copy, and fax jobs, the usage of
consumable products, and any warnings.
Status button
Data light (Green)
On when print data is stored in the print buffer (the section of printer memory
reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
s
t
On or flashes when an error has occurred.
Error light (Orange)
Use this button to return to a higher hierarchical level while doing settings.
Return button
Getting to Know Your Printer 30
AL-MX300 Series User's Guide
u
Use this button to move to a menu displayed on the LCD panel.
Function buttons (F1 to F4)
LCD menu list
LCD menu contents vary according to the function or operation that you choose.
Note:
The screen below uses the Basic Setting display in Copy mode.
a.
b.
Use l or r button to select tabs.
Use the F1 to F4 button to select.
Mode
Copy
Tab
F1
F2
F3
Duplex
F4
Density
Basic Setting
Quality
Paper
Zoom
Doc Type
Layout
-
-
BindMargn
ScanCont.
E-mail
Other
AdvnSetting1
AdvnSetting2
(Select function)
RmvShadow
Full Copy
Folder
-
ID Card
Collate
PC*1
USB Mem
Scan
Save to/E-mail*2
Header
Basic Setting
Doc Size
Doc Type
ADF Dup
File Setting
Format
Resolut.
PDF
Color Mode
ADF Cont.
-
Scan Setting
(Select function)
Density
ComprsRat
Print*3
Password*4
QuickPrn*4
USB Mem
Getting to Know Your Printer 31
AL-MX300 Series User's Guide
Mode
Fax*5
Tab
Basic Setting
Advanced
Function
F1
Doc Size
F2
Quality
F3
ADF Dup
ADF Cont.
-
F4
Density
Fax Speed
Mem Rate
Time
-
-
RceiveMem*6
*1 Displayed only when Setting - Scan Settings- Network Scanis set to Permit.
*2 Varies depending on the function you select. Not displayed when USB Memis selected.
*3 Varies depending on the function you select.
*4 Displayed only when Setting – Common Settings– Setup Menu– RAM Diskis set to Normalor Maximum.
*5 DNF model only
*6 Displayed only when Setting – Fax Settings– Reception Settings– Memory Receptionis set to Specify Timeor
Always.
Options
You can add to your printer’s capabilities by installing any of the following options.
❏ 250-Sheet Paper Cassette Unit (C12C802791)
This unit increases paper feeding capacity up to 250 sheets of paper. You can install only one unit
on your printer.
Consumable Products
The life of the following consumable products is monitored by the printer. The printer lets you know
when replacements are needed.
Product name
Product code
0690
Standard Capacity Toner Cartridge (Black)
High Capacity Toner Cartridge (Black)
Return High Capacity Toner Cartridge (Black)
0689
0691
Return toner cartridge is not sold in some areas. Contact your local Epson dealer/representative about
the availability of the Return toner cartridge scheme.
Getting to Know Your Printer 32
AL-MX300 Series User's Guide
Maintenance Parts
The life of the following maintenance parts is monitored by the printer. The printer lets you know
when replacements are needed.
Product name
Product code
1228
Photoconductor Unit (Black)
Fuser Unit
3049/3050
Note:
❏ Fuser unit part numbers vary by location.
Printer Features
Printing
You can directly print files saved in a USB memory by plugging the USB memory into the USB Host
interface.
Various printer drivers are available.
Copying
Various copying functions are available such as duplex copying and zoom copying.
Getting to Know Your Printer 33
AL-MX300 Series User's Guide
Scanning
You can scan a document using the printer’s control panel and store the data on a USB memory or in a
shared folder on the network, or send the data as an e-mail attachment.
Faxing
You can send faxes from a computer by using EpsonNet PC-FAX.
You can store received fax data in a shared folder on the network or send it as an e-mail attachment.
Where to Find Information
Setup Guide
Provides you with information on assembling the printer and installing the printer software.
User’s Guide (this manual)
Provides you with detailed information on the printer’s functions, optional products, maintenance,
troubleshooting, and technical specifications.
Network Guide
Provides network administrators with information on both the printer driver and network settings.
Getting to Know Your Printer 34
AL-MX300 Series User's Guide
Font Guide
Provides you with information on fonts used on the printer.
OSS
Provides the detailed explanation about the open source software programs contained in this printer.
Online Help for each printer software
Click Help for detailed information and instructions on each printer software that controls your
printer. Online help is automatically installed when you install the printer software.
Getting to Know Your Printer 35
AL-MX300 Series User's Guide
Chapter 2
Paper Handling
Loading Paper into Your Printer
and Using Print Media” on page 45. For specifications or details about the paper types and sizes, see
Important:
c Do not let the paper’s edge slide across your skin because the edge of the paper may cut you.
Note:
This printer does not automatically detect paper sizes in the paper sources. Make sure to specify a paper
sizeusingtheTray Menuonthecontrolpanel. Thefactorydefault papersizeforallofthepapersourcesis
A4.
MP tray
The MP tray (Multi-purpose tray) is the paper source that is available for various types of paper, such
as labels, envelopes, and thick paper.
Note:
1. Open the MP tray.
Paper Handling 36
AL-MX300 Series User's Guide
2. Slide the paper guides to accommodate the paper you are loading.
3. Load a stack of the desired paper with the printable surface facing up. Then slide the paper guides
to get a snug fit.
Paper Handling 37
AL-MX300 Series User's Guide
Note:
❏ Make sure that you do not load paper beyond the limit mark.
❏ After loading paper, set the MP Tray Sizeand MP Tray Typesettings to match the loaded
paper size and type on the control panel. For details, see “Tray Menu” on page 141.
When loading A5 or smaller paper on the MP tray
1. Pull out the MP tray.
Paper Handling 38
AL-MX300 Series User's Guide
2. Pull up the paper guide in the center of the MP tray.
3. LoadastackofthedesiredpaperontheMPtraywiththe printablesurfacefacingup. Thenslidethe
paper guides to get a snug fit.
Paper Handling 39
AL-MX300 Series User's Guide
4. Insert the MP tray into the printer.
Note:
After loading paper, set the MP Tray Sizeand MP Tray Typesettings to match the loaded paper
Paper cassette
This cassette gives you a second paper source in addition to the MP tray.
Note:
Perform the same procedure to load paper into the optional paper cassette.
Paper Handling 40
AL-MX300 Series User's Guide
1. Pull out the paper cassette.
Paper Handling 41
AL-MX300 Series User's Guide
2. Pinch the knobs and slide the paper guides to accommodate the paper you are loading.
Note:
When loading paper that is 13" or 14" portrait, extend the paper cassette. If you do not need to extend
the paper cassette, go to step 5.
Paper Handling 42
AL-MX300 Series User's Guide
3. Pinch the knobs and pull out the paper tray to extend the paper cassette and align the arrow marks
according to the paper size.
4. Pinch the knobs and slide the paper guide to accommodate the paper you are loading.
Paper Handling 43
AL-MX300 Series User's Guide
5. Load a stack of the desired paper on the center of the paper cassette with the printable surface
facing up.
Note:
Make sure that you do not load paper beyond the limit mark.
6. Reinsert the paper cassette into the printer.
Note:
After loading paper, set the Cassette1 Sizeand Cassette1 Typesettings to match the loaded
paper size and paper type on the control panel. For details, see “Tray Menu” on page 141.
Paper Handling 44
AL-MX300 Series User's Guide
Output Tray
The output tray is located on the top of the printer. Since printouts are output face-down, this tray is
also referred to as the face-down tray. Up to 150 sheets can be stacked when using the plain paper.
Extend the paper support to accommodate the size of the paper loaded in the MP tray or lower paper
cassette to prevent it from slipping off the printer.
Selecting and Using Print Media
You can use special media, such as labels, envelopes, and thick paper.
When loading special media, you should make paper settings. You can also make these settings on the
Note:
Since the quality of any particular brand or type of media may be changed by the manufacturer at any
time, Epson cannot guarantee the quality of any type of media. Always test samples of media stock before
purchasing large quantities or printing large jobs.
Labels
Available labels
❏ Labels designed for laser printers or plain-paper copiers
❏ Labels that completely cover the backing sheet, with no gaps between the individual labels
Paper Handling 45
AL-MX300 Series User's Guide
Available paper source
❏ MP tray
❏ Lower paper cassette
Printer driver settings
MP tray
Printer driver settings
Paper Size
A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4
Paper Source
Paper Type
MP Tray
Labels
Lower paper cassette
Printer driver settings
Paper Size
A4, LT
Cassette 1, Cassette 2*
Labels
Paper Source
Paper Type
*
Available only when the optional paper cassette unit is installed.
Note:
❏ Depending on the quality of labels, the printing environment, or the printing procedure, labels might
be wrinkled. Make a trial print run before you print on a lot of labels.
❏ Duplex printing is not available for labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels in your
printer.
Envelopes
Available envelopes
❏ Envelopes that have no glue or no tape
Important:
c Do not use window envelopes. The plastic on most window envelopes will melt.
Paper Handling 46
AL-MX300 Series User's Guide
Available paper source
❏ MP tray
* MON, DL, C6
Printer driver settings
MP tray
Printer driver settings
MON, DL, C6
MP Tray
Paper Size
Paper Source
Paper Type
Envelope
Note:
❏ Depending on the quality of envelopes, the printing environment, or the printing procedure,
envelopes might be wrinkled. Make a trial print run before you print on a lot of envelopes.
❏ Duplex printing is not available for envelopes.
Paper Handling 47
AL-MX300 Series User's Guide
❏ If you do not load envelopes in the MP tray right after they have been removed from the packaging,
they may bulge. To avoid jams, flatten them as shown below before loading them in the MP tray.
❏ If envelopes do not feed well, reducing the number of envelopes that are loaded may solve the
problem.
Thick paper
Available paper source
❏ MP tray
❏ Lower paper cassettes
Printer driver settings
MP tray
Printer driver settings
Paper Size
A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4
MP Tray
Paper Source
Paper Type
Thick (for 106 to 163 g/m² paper), Extra Thick (for 164 to 216 g/m² paper)
Paper Handling 48
AL-MX300 Series User's Guide
Lower paper cassettes
Printer driver settings
A4, A5, A6*1, B5, LT, HLT, LGL, GLT, GLG, EXE, F4
Cassette 1, Cassette 2*2
Paper Size
Paper Source
Paper Type
Thick (for 106 to 163 g/m² paper), Extra Thick (for 164 to 216 g/m² paper)
*1 Available only for Cassette 1.
*2 Available only when the optional paper cassette unit is installed.
Note:
❏ Duplex printing is not available for Extra Thick.
❏ If performing manual duplex (2-sided) printing, ensure that the paper is not curled.
Custom paper size
Available paper source
❏ MP tray
❏ Lower paper cassettes
Printer driver settings
MP tray
Printer driver settings
User Defined Size*
MP Tray
Paper Size
Paper Source
Paper Type
Plain, Semi-Thick, Preprinted, Letterhead, Recycled, Color, Labels, Thick, Extra
Thick, Special
*
76.2 × 127 mm at minimum and 215.9 × 355.6 mm at maximum.
Paper Handling 49
AL-MX300 Series User's Guide
Lower paper cassettes
Printer driver settings
User Defined Size*1
Paper Size
Cassette 1, Cassette 2*2
Paper Source
Paper Type
Plain, Semi-Thick, Preprinted, Letterhead, Recycled, Color, Labels, Thick, Extra
Thick, Special
*1 76.2 × 127 mm at minimum and 215.9 × 355.6 mm at maximum for Cassette 1
139.7 × 210 mm at minimum and 215.9 × 355.6 mm at maximum for Cassette 2
*2 Available only when the optional paper cassette unit is installed.
Note:
❏ Depending on the quality of the non-standard size paper, the printing environment, or the printing
procedure, thepapermightskew. Makeatrialprintrunbeforeyouprintonalotofnon-standardsize
paper.
❏ Duplex printing is not available for Labels and Extra Thick.
❏ For Windows, access the printer driver, then select User Defined Size from the Paper Size list on the
Basic Settings tab. In the User defined Paper Size dialog box, adjust the Paper Width, Paper Length,
and Unit settings to match your custom paper. Then click OK and your custom paper size will be
saved.
❏ The saved paper sizes can only be used with the printer driver you saved them to. Even if multiple
printer names are set for a printer driver, the settings can be available only for the printer name in
which you saved the settings.
❏ When sharing the printer on a network, you cannot create User Defined Size at the client.
❏ If you cannot use the printer driver as explained above, make this setting at the printer by accessing
the control panel’s Printing Menuand selecting CTM(custom) as the Page Sizesetting.
Setting Your Originals
Before scanning a document, remember to respect the rights of copyright owners. Do not scan
published text or images without first checking their copyright status.
Paper Handling 50
AL-MX300 Series User's Guide
Paper size
The following sizes of documents can be placed on the document table or in the Auto Document
Feeder.
Document source
Document table
Paper size
8.5 × 11.7 inch (Maximum paper size)
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4
A4, LT, LGL
Auto Document Feeder
Copy:
Scan:
Fax:
Paper type for the Auto Document Feeder
You can use the following documents with the Auto Document Feeder.
Paper Type
Capacity
Weight
Plain paper, High-quality paper, Recycled paper, Page printer paper, Ink jet paper
Up to 50 sheets (75 g/m²)
60 to 125 g/m²
Paper direction
When you place document pages sideway, set them so that the top of the document is toward the left
side of the printer.
Note:
For duplex copying or duplex scanning, specify the document direction in the Document Direction
Setting your originals on the document table
When using the document table, set an original one sheet at a time.
Paper Handling 51
AL-MX300 Series User's Guide
Important:
c
❏ Do not place heavy objects on the glass surface of the document table. Also, do not press the
glass surface with too much force.
❏ Be sure to close the ADF cover when scanning a document on the document table.
1. Open the document cover gently.
2. Place an original on the document table, with the side to be scanned facing down.
Paper Handling 52
AL-MX300 Series User's Guide
Note:
❏ The area with a width of maximum 1.0 mm from the horizontal edge and 1.0 mm from the
vertical edge is not scanned.
1. Maximum unreadable area of 1.0 mm
2. Maximum unreadable area of 1.0 mm
2
1
❏ Always keep the document table clean.
3. Close the document cover gently so that the original does not move.
Note:
❏ Do not leave documents, such as photographs, on the document table for an extended period of
time because they may stick to the glass.
❏ Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy
and out of focus. Also be sure to close the document cover to prevent interference from external
light.
Setting your originals into the Auto Document Feeder
Follow the steps below to load documents in the Auto Document Feeder.
Paper Handling 53
AL-MX300 Series User's Guide
1. Slide the edge guides all the way outward.
2. Insert a stack of documents face-up in the Auto Document Feeder until it meets resistance, and
then move the edge guides so they are flush with the edges of your documents.
3. Raise the paper support.
Paper Handling 54
AL-MX300 Series User's Guide
Note:
❏ Make sure the ADF cover is closed firmly. If the ADF cover is open, the document table is
preemptively scanned and a blank copy is output even if an original is set in the Auto Document
Feeder.
❏ If you load multiple pages in the Auto Document Feeder, the pages will be fed from the top and then
ejected face-down.
Paper Handling 55
AL-MX300 Series User's Guide
Chapter 3
Printing
Setting the Print Quality
You can change the print quality of printouts through settings in the printer driver.
In the Automatic setting, you can select a print mode according to your printing purpose. The printer
driver makes optimal settings depending on the print mode you have selected. In the Advanced
setting, you have more setting options.
Note:
The printer driver’s online help provides details on printer driver settings.
Using the Automatic setting
For Windows users
1. Click the Basic Settings tab.
2. Click Automatic, then choose desired printing quality.
Printing 56
AL-MX300 Series User's Guide
3. Click OK.
Using the Advanced setting
For Windows users
1. Click the Basic Settings tab.
2. Select Advanced. Then select the most appropriate setting from the list according to the type of
document or image you want to print.
When you choose a predefined setting, other settings such as Print Quality and Graphics are set
automatically. Changes are shown in the current settings list on the Setting Information dialog box
that appears by pressing the Setting Info button on the Optional Settings tab.
Customizing print settings
If you need to change detailed settings, make the settings manually.
For Windows users
1. Click the Basic Settings tab.
Printing 57
AL-MX300 Series User's Guide
2. Select Advanced, then click More Settings.
3. Make appropriate settings. For details about each setting, see online help.
4. Click OK.
Saving your settings
You can save your custom settings.
Note:
❏ You cannot use a predefined setting name for your custom settings.
❏ Thesavedcustomsettingscanonly beusedwiththe printerdriveryousavedthemto. Evenif multiple
printer names are set for a printer driver, the settings can be available only for the printer name in
which you saved the settings.
❏ You cannot delete predefined settings.
For Windows users
Note:
When sharing the printer on a network, Save Settings is grayed out and you cannot create a custom
setting at the client.
1. Click the Basic Settings tab.
2. Select Advanced, then click Save Settings to open the Custom Settings dialog box.
3. Type a name for your custom settings in the Name box, then click Save.
Your settings will appear in the drop-down list which appears when Advanced is selected on the Basic
Settings tab.
Note:
To delete a custom setting, follow the step 1 and 2, select the setting in the Custom Settings dialog box,
then click Delete.
You can create new settings in the More Settings dialog box. When you create new settings, Custom
Settings is displayed in the list on the Basic Settings tab. In this case, the original setting is not
overwritten. To save the new settings, save them under a new name.
Printing 58
AL-MX300 Series User's Guide
Toner Save mode
Toreducetheamountoftonerusedinprintingdocuments, youcanprintroughdraftsusingtheToner
Save mode.
For Windows users
1. Click the Basic Settings tab.
2. Select Advanced, then click More Settings to open the More Settings dialog box.
3. Select the Toner Save check box, then click OK.
Improving the clarity of color documents
Printing text clearly in black
When you print a color document, the quality of text can be made more legible by printing it in black.
1. Click the Basic Settings tab.
2. Select Print Text in Black from the Visibility drop-down list.
Printing 59
AL-MX300 Series User's Guide
3. Click OK.
Enhancing color documents
When you print a color document, the quality of document can be improved by printing text, graphs,
and images enhanced with black.
Note:
❏ This function is only for Microsoft Office Excel, Word, and PowerPoint in Windows XP, 2003, 2007,
and 2010.
❏ Set Grayscale to On when you print from Microsoft PowerPoint.
❏ Text, that is 96 pt or larger, cannot be enhanced.
❏ Images, such as photos, in print data may have low quality.
❏ Printing speed may slow down.
❏ The amount of toner consumed may increase with some color documents.
1. Click the Basic Settings tab.
2. Select For Color Text, Graphs, and Images from the Visibility drop-down list.
Printing 60
AL-MX300 Series User's Guide
Note:
You can select For Color Text when you print only text and For Color Graphs and Images when
you do not need to enhance texts.
3. Click Decoration Settings, and select appropriate settings in the Decoration Settings dialog
box.
Adjusting the weight of thin lines
Thin lines can be printed in thicker lines as visible.
1. Click the Basic Settings tab.
2. Select Advanced, then click More Settings to open the More Settings dialog box.
3. Select the Emphasize Thin Lines check box, then click OK.
The default setting for the Emphasize Thin Lines is on.
Setting the Advanced Layout
Duplex printing
This function allows you to print on both sides of the paper automatically.
For Windows users
1. Click the Basic Settings tab.
Printing 61
AL-MX300 Series User's Guide
2. Select the Duplex check box, then select Left, Top, or Right as the binding position.
3. If you want to make detailed settings, click Duplex Settings to open the Duplex Settings dialog
box.
4. Make appropriate settings. For details about each setting, see online help.
5. Click OK.
Modifying the print layout
This function allows you to print multiple pages on single sheets of paper.
For Windows users
1. Click the Advanced Layout tab.
2. Select the Print Layout check box and the number of pages you want to print on one sheet of
paper.
Printing 62
AL-MX300 Series User's Guide
3. If you want to make detailed settings, click More Settings. The Print Layout Settings dialog box
appears.
4. Make appropriate settings. For details about each setting, see online help.
5. Click OK.
Resizing printouts
This function allows you to enlarge or reduce your document.
For Windows users
1. Click the Advanced Layout tab.
Printing 63
AL-MX300 Series User's Guide
2. Select the Zoom Options check box.
3. If you want to resize pages automatically to fit the output paper, select the desired paper size from
the Output Paper drop-down list.
Ifyouwanttoresizepagesbyaspecifiedmagnification, selecttheZoomTo checkbox, thenspecify
the percentage. You can also select the output paper size.
4. Select Upper Left (to print reduced page image at upper left corner of the paper) or Center (to
print reduced page image with centering) for Location setting.
Note:
This setting is not available when you select Zoom To check box.
5. Click OK.
Printing watermarks
This function allows you to print a text-based or image-based watermark on your document.
For Windows users
1. Click the Advanced Layout tab.
Printing 64
AL-MX300 Series User's Guide
2. Select a watermark that you want to use from the Watermark drop-down list.
3. If you want to make detailed settings, click Edit/Delete, and make appropriate settings. For
details about each setting, see online help.
4. Click OK.
Making a new watermark
For Windows users
1. Click the Advanced Layout tab.
2. Click Add New Watermark.
3. Select Text or BMP and type a name for the new watermark in the Name box.
4. If you select Text, type the watermark text in the Text box. If you select BMP, select the BMP file
you want to use, then click Open.
5. Click OK.
Note:
❏ You can register up to 10 original watermarks.
Printing 65
AL-MX300 Series User's Guide
❏ To edit the saved watermark, click Edit/Delete on the Advanced Layout tab, select the watermark
you want to edit in the Name box, and make appropriate settings, then click OK.
❏ To remove the saved watermark, click Edit/Delete on the Advanced Layout tab, select the
watermark you want to delete in the Name box, then click Delete.
❏ The saved watermarks can only be used with the printer driver you saved them to. Even if multiple
printer names are set for a printer driver, the settings can be available only for the printer name in
which you saved the settings.
❏ When sharing the printer on a network, you cannot create a user defined watermark at the client.
Printing headers and footers
This function allows you to print user name, computer name, date, time, or collate number, at the top
or bottom of each page in a document.
For Windows users
1. Click the Advanced Layout tab.
2. Select the Header/Footer check box, then click Header/Footer Settings.
3. Select the items from the drop-down list.
Printing 66
AL-MX300 Series User's Guide
Note:
❏ If you select Collate Number, the number of copies is printed.
❏ When using the reserve job function, you cannot select Collate Number.
4. Click OK.
Printing with an overlay
This function allows you to print a standard form or letterhead onto the original document.
Note:
❏ This function is for Windows only.
❏ The overlay function is available only when ESC/Page is selected for the Printing Mode in the
Extended Settings dialog box from the Optional Settings tab.
Creating an overlay
1. Click the Advanced Layout tab.
2. Select the Form Overlay check box.
3. Select Create Overlay Data, then click More Settings. The Create Form dialog box appears.
Printing 67
AL-MX300 Series User's Guide
4. Type the form name in the Form Name box and its description in the Description box.
5. Select Foreground Document or Background Document to specify whether the overlay will
be printed as foreground or background of the document.
6. Select the Assign to Paper Source check box to display the form name in the Paper Source
drop-down list on the Basic Settings tab.
7. Click OK.
Note:
❏ To change the settings of the overlay form data you created, access the printer driver and follow the
step 1 and 2 above. Note that on the step 3, select Overlay Print, then click Edit Form.
❏ The following 9 characters cannot be used for form names: \ / : * ? " < > |.
Printing an overlaid document
YoucanselecttheregisteredformdatafromthePaperSourcedrop-downlistontheBasicSettingstab.
For registering form data in the Paper Source, see step 6 in “Creating an overlay” on page 67.
If overlay form data is not registered in the Paper Source or if you want to make detailed settings,
follow the steps below.
1. Click the Advanced Layout tab.
2. Select the Form Overlay check box.
3. Select the Overlay Print check box, then click More Settings. The Form Selection dialog box
appears.
4. Make appropriate settings. For details about each setting, see online help.
Note:
If you cannot select the form from the application, access the printer driver from the operating
system. For details, see “Accessing the printer driver” on page 250.
5. Click OK.
Saving an overlaid form pre-settings
This function allows you to save the settings you made from “Creating an overlay” on page 67.
Printing 68
AL-MX300 Series User's Guide
2. Type the pre-settings name in the Form Pre-Settings Name box, then click Save. Your
pre-settings name will appear in the Form Pre-Settings drop-down list in the Form Selection
dialog box.
3. Click OK. Your pre-settings name will appear in the Pre-Settings drop-down list in the Advanced
Layout dialog box.
Note:
❏ To delete an overlaid form pre-setting, follow the step 1, select the pre-settings name you want to
delete from Form Pre-Settings drop-down list, click Delete, and then click OK.
❏ You can save up to 20 pre-settings.
Printing the copy-protected document
This function allows you to print a document as a copy-protected document. When you try to copy a
copy-protected document, “Copy” is printed several times on the document.
Note:
❏ Epson will not guarantee to secure from information leakage and any other damage by using this
function, nor hidden letters appear in all cases.
❏ Screen-tone may be too dark, hidden letters may not be printed on the entire print, or hidden letters
may not appear when photocopied depends on the models, settings, and combinations of
photocopiers, fax machine, input device such as digital cameras and scanners, output device such as
printers; printer driver settings of this product; condition of consumables such as toner and output
paper type.
For Windows users
Note:
With this function, the Print Quality setting is changed to Fine, and the Toner Save setting is disabled.
Form Overlay function is also disabled.
1. Click the Advanced Layout tab.
Printing 69
AL-MX300 Series User's Guide
2. Select Copy from the Anti-Copy Pattern drop-down list.
3. If you want to make detailed settings, click Edit/Delete, and make appropriate settings. For
details about each setting, see online help.
4. Click OK.
Printing Multiple Print Jobs at Once
This function allows you to print several documents created by different applications at once
arranging settings, such as the printing order, duplex, and the print layout.
1. Click the Basic Settings tab.
2. Select the Print Job Arranger check box.
3. Click OK.
The Print Job Arranger screen appears when a print job is executed. Make appropriate settings. For
details, see the Print Job Arranger help.
Printing 70
AL-MX300 Series User's Guide
Using the Reserve Job Function
This function allows you to store print jobs on the printer’s memory and to print them later directly
from the printer’s control panel. You can prevent the printed document from being looked at by other
people by applying a password to the print job.
This function uses the following types of printer memory.
Printer’s Storage
Description
RAM Disk
To enable the RAM disk, you have to set the RAM Disksetting on the control panel to
Normalor Maximum.
The table below gives an overview of the Reserve Job options.
Reserve Job Option
Description
Re-Print Job
Lets you print the job now and store it on the printer’s memory. You can print the same
job several times.
Verify Job
Lets you print one copy now to verify the content. You can print multiple copies later.
Confidential Job
Lets you apply a password to the print job. You can print the job entering the password
on the printer’s control panel.
Sending the print job
For Windows users
1. Click the Optional Settings tab, then click Reserve Jobs Settings. The Reserve Jobs Settings
dialog box appears.
2. Select the Reserve Job On check box, then select Re-Print Job, Verify Job, or Confidential
Job.
3. Enter a user name and job name in the corresponding text boxes. If you selected Confidential
Job, enter a four-digit number in the password text box to set the password.
4. Click OK.
Note:
The OK button becomes available after both the user name and job name have been entered.
Printing 71
AL-MX300 Series User's Guide
If you selected Re-Print Job, the printer prints your document. If you selected Verify Job, the printer
prints one copy of your document.
To print or delete this data using the printer’s control panel, see “Printing and Deleting Reserve Job
Canceling a Print Job
From the printer
Follow the steps below to cancel a print job by using the Status button.
Note:
Using the Stop button also enables you to cancel the current print job. Press the Stop button and then
press the F3 button to select Yes.
1. Press the Status button . The Status Check screen appears.
2. Select Print Job Check, and then press the OK button.
Note:
Press the F3 button to pause the current print job. If you want to resume the print job, press the F3
button again.
3. Select the print job that you want to cancel using the u or d button, and press the OK button.
Printing 72
AL-MX300 Series User's Guide
4. Press the F1 button, and then press the F3 button. Printing is canceled.
Note:
The operation is canceled and printer restarts one minute after the printer is not operated.
After canceling jobs is completed, the printer recovers from pause.
From the computer
For Windows users
Double-click your printer’s icon on the taskbar. Select the job in the list, then click Cancel from the
Document menu.
Printing 73
AL-MX300 Series User's Guide
Interrupting Printing
From the printer
If the printer is shared, it is possible to interrupt the current print job to print a different print job.
Follow the steps below to use this function.
1. Press the Status button . The Status Check screen appears.
2. Select Print Job Check, and then press the OK button.
Note:
Press the F3 button to pause the current print job. If you want to resume the print job, press the F3
button again.
3. Select the print job that you want to print using the u or d button, and press the OK button.
4. Press the F2 button, and then press the F3 button. The printer starts printing the selected print
job.
Note:
The operation is canceled and printer restarts one minute after the printer is not operated.
Printing 74
AL-MX300 Series User's Guide
Printing Directly from a USB Memory
You can print files in the USB memory via a USB Host interface without starting the computer,
installing the printer driver, or connecting the printer to a network.
Note:
❏ If the USB Hostsetting on the control panel is set to Off, this function cannot be used. Confirm the
setting is set to ONin advance.
❏ If the printer is in the sleep mode, the USB memory may not be detected automatically. In that case,
press any button on the control panel.
❏ If a large numbers of files are in the USB memory, accessing the USB memory may take long time.
❏ If accessing the USB memory takes too long, try formatting it to improve the access speed.
Index printing
You can print the index of files stored in the USB memory.
Follow the steps below to print the index.
1. Press the Print button.
2. Connect a USB memory to the USB Host interface of the printer.
The printer searches the files in the USB memory. If any supported files are detected, the control
panel menu appears automatically.
Printing 75
AL-MX300 Series User's Guide
Note:
If Can’t Print Filesis displayed on the control panel, printable files were not detected in the
USB memory.
3. Press the F1 button to select Index.
4. Make appropriate settings as described below.
Item
Settings (default in bold)
A4, LT, LGL
Paper
Duplex
Off (Simplex), Duplex Long, Duplex Short
5. Specify the number of copies using the numeric keypad on the control panel.
6. Press the Start button to start printing.
Document printing
You can print the document file stored in the USB memory. The supported file format is PDF only.
Follow the steps below to print the document file.
1. Press the Print button.
2. Connect a USB memory to the USB Host interface of the printer.
Printing 76
AL-MX300 Series User's Guide
The printer searches the files in the USB memory. If any supported files are detected, the control
panel menu appears automatically.
Note:
If Can’t Print Filesis displayed on the control panel, printable files were not detected in the
USB memory.
3. Press the F3 button to select Doc File.
4. Press the u or d button to select the file, then press the OK button.
5. Make appropriate settings as described below.
Item
Settings (default in bold)
Paper
Duplex
A4, A5, A6, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, DL, C6
Off (Simplex), Duplex Long, Duplex Short
6. Specify the number of copies using the numeric keypad on the control panel.
7. Press the Start button to start printing.
Note:
❏ The printer supports PDF 1.6 (Acrobat 7). Other versions of PDF files may not print. In that case,
open the files with Adobe Reader and print them from the computer.
❏ If a PDF file is locked with a password, the password screen appears on the control panel. Enter
the password to print the file.
To enter thepassword, usethenumerickeypad. Afterallcharactersaredetermined, pressthe OK
button.
Image printing
You can print the image files stored in the USB memory. The supported file formats are JPG and
TIF.
Follow the steps below to print the image files.
1. Press the Print button.
Printing 77
AL-MX300 Series User's Guide
2. Connect a USB memory to the USB Host interface of the printer.
The printer searches the files in the USB memory. If any supported files are detected, the control
panel menu appears automatically.
Note:
If Can’t Print Filesis displayed on the control panel, printable files were not detected in the
USB memory.
3. Press the F2 button to select ImgFile.
4. Press the u or d button to select the file, then press the OK button. You can select multiple files at
the same time.
5. Make appropriate settings as described below.
Tab
Item
Settings (default in bold)
A4, LT, LGL
Basic
Paper
Setting
Layout
Duplex
FileName
None, 2 in 1, 4 in 1, 8 in 1
Off (Simplex), Duplex Long, Duplex Short
On, Off
Advanced
6. Specify the number of copies using the numeric keypad on the control panel.
7. Press the Start button to start printing.
Printing 78
AL-MX300 Series User's Guide
Chapter 4
Scanning
Starting a Scan
The scanning operation is performed either from the control panel or the TWAIN-compliant
scanning program.
Using the Control Panel
You can scan a document using the printer’s control panel and store the data as followings.
❏ Scan data to a USB memory connected to the printer
❏ Scan data to a shared folder on the network
❏ Scan data to a file to send by e-mail
❏ Scan data to a computer
Required settings before scanning
The following settings are required to save scanned data in a shared folder, send it by e-mail, or save it
in a computer.
❏ E-mail server setting (when sending by e-mail)
❏ E-mail address setting (when sending by e-mail)
❏ Folder address setting (when saving to a shared folder)
❏ WSD scan settings or Document Capture Pro installations and settings (when saving to a
computer)
Follow the instructions below for each setting.
E-mail server setting
1. Press the Setting button on the control panel.
Scanning 79
AL-MX300 Series User's Guide
2. Specify E-mail Server Settingsin the Common Settingsmenu. For details about each
E-mail address setting
1. Press the Setting button on the control panel.
2. Specify E-mail Addressin the Address Settingsmenu. For details about each setting, see
Folder address setting
1. Press the Setting button on the control panel.
2. Specify Folder Addressin the Address Settingsmenu. For details about each setting, see
Note:
You can print the e-mail address list and PC folder list registered in the printer. To print the report, press
the Setting button on the control panel. Select System Report Printingin the System
Informationmenu, and then select E-mail Address Listor Folder List.
WSD scan settings and Document Capture Pro installations and settings
WSD Scanner setting:
For details about selecting this printer’s WSD scanner from Add a device, see the help for your
operating system. WSD is available for Windows Vista and any later operating systems.
Document Capture Pro installation and setting:
download the software. For details about settings, see the help for the software.
Scan mode menu list
Item
Description
Document Detailed
Settings
Document Size
Selection
Select the document size.
Document
Set the document direction.
Direction Selection
Document Type
Select the type of the document.
Scanning 80
AL-MX300 Series User's Guide
Item
Description
ADF Duplex Selection
Rotates the document direction automatically according to the
Document Type Selectionand Document Direction Selection
when scanning a duplex document to a PDF format, so that the text in
the document is in the correct orientation for reading.
Input File Header
Input the file header. (Up to 20 characters).
Select the file format for scanned documents.
Set a password for opening the document.
Format Setting for Saving
Detailed PDF Set
Password Setting
Authority Setting
Set a password for restricting printing and editing of the generated
PDF.
High Compression
Set this to generate a highly compressed PDF from the scanned data.
Select whether to scan in color or monochrome.
Color Mode
Scan Density
Scanned images get lighter as the value is lowered, and darker as the
value is increased.
Resolution
Thehighertheresolution,thebetterthequality, butthescanningtime
and the size of the file both increase.
Compression Rate Settings
Continuous Scan from ADF
Set the compression rate of files. The lower the compression, the
better the quality, but the size of the file increases.
Set this to continue scanning additional documents after the current
document has finished being scanned.
Saving scanned data to a USB memory
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
Scanning 81
AL-MX300 Series User's Guide
3. Press the F1 button on the control panel.
4. Connect a USB memory to the USB Host interface of the printer.
Note:
If necessary, specify the desired settings such as Basic Setting, File Setting, and Scan
5. Press the Start button.
The printer starts scanning.
Saving scanned data to a shared folder
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
Scanning 82
AL-MX300 Series User's Guide
3. Press the F2 button on the control panel.
4. Press the l or r button several times to select the Basic Settingtab and press the F1 button.
5. Select an item using F1 to F4 buttons and specify the destination folder.
Item
Description
Save to
-
Directly enter a destination folder path. (Up to 107 characters)
The address should be specified with both the IP address and domain name.
Address
Select a destination folder from the address list.
Enter the login user name. (Up to 30 characters)
Enter the password. (Up to 20 characters)
Select a protocol for scanning (SMB or FTP).
User Name
Password
Folder Connection Protocol
Note:
❏ To save scanned data in a shared folder on a computer running Windows 8, 7, or Vista, enter the
same user name for User Nameas registered on the computer.
❏ When a DNS server is activated in your environment, you can use a domain name for the folder
path.
6. Press the OK button.
Note:
If necessary, specify the desired settings, such as Basic Setting, File Setting, and Scan
7. Press the Start button.
The printer starts scanning.
Scanning 83
AL-MX300 Series User's Guide
Sending scanned data by e-mail
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Press the F3 button on the control panel.
4. Press the l or r button several times to select the Basic Settingtab and press the F1 button.
5. Press the F1 or F3 buttons to select the items and enter a destination e-mail address and subject.
Item
Description
Address List
Address
Direct
Select a destination from the Address Book.
Enter the mail address directly. (Up to 64 characters)
Delete the selected address.
Delete
Input Subject
Input the e-mail subject.
Reply
Address
Address
Direct
Select a reply destination from the Address Book.
Enter the reply mail address directly. (Up to 64 characters)
Delete the selected reply address.
Delete
Note:
A maximum of 255 characters can be entered for the destination e-mail address.
6. Press the OK button.
Note:
If necessary, specify the desired settings, such as Basic Setting, File Setting, and Scan
Scanning 84
AL-MX300 Series User's Guide
7. Press the Start button.
The printer starts scanning.
Note:
If a failure occurs while transmitting e-mail, an error report is printed automatically.
Saving Scanned data to a computer (Document Capture Pro/WSD)
1. Press the Scan button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Press the F4 button on the control panel.
4. Select WSDor Document Capture Pro, and then press the OK button.
Note:
The procedure below uses WSD scan as an example.
5. Select a computer, from the list of connected computers, in which to save scanned data.
6. Press the OK button.
7. Press the Start button.
The printer starts scanning.
Scanning 85
AL-MX300 Series User's Guide
Using Epson Scan from Your Computer
Before Starting EPSON Scan
You need to make the settings using EPSON Scan Settings to scan with the printer.
Note for Windows:
❏ For Windows 8, 7, or Vista, you need an administrator account and password if you log on as a
standard user.
❏ For Windows XP, you must log on to a Computer Administrator account.
Note for Mac OS X:
❏ Do not use the Fast User Switching function while using your scanner.
❏ You must log on to a Computer Administrator account.
1. Start EPSON Scan Settings.
Windows:
Select the start button icon or Start > All Programs or Programs > EPSON >EPSON Scan >
EPSON Scan Settings.
Mac OS X:
Select the EPSON Scan Settings icon in the Epson Software folder in the Applications folder.
2. Select your scanner from the Select Scanner drop-down list.
over a network” on page 86 to scan over a network.
For scanning via USB interface
1. Select Local, then click Test to check the connection. If everything works properly, a successful
connection message appears.
2. Click OK to save the settings.
For scanning over a network
Make sure your printer and printer’s network interface are working properly. Then follow the steps
below to use the EPSON Scan Settings program to enable network scanning.
Scanning 86
AL-MX300 Series User's Guide
Note:
Obtain the IP address or host name of the printer from your network administrator.
1. Select Network, then click Add.
2. In the Add window, choose the printer’s IP address under Search for addresses, or select Enter
address and type in the address. Then click OK.
Scanning 87
AL-MX300 Series User's Guide
3. In the EPSON Scan Settings window, click Test to check the connection. If everything works
properly, a successful connection message appears.
4. Click OK to save the settings.
Starting Epson Scan
You can start Epson Scan by double-clicking the EPSON Scan icon.
Windows:
Double-click the EPSON Scan icon on the desktop.
Or, select
Scan.
Start or Start > All Programs or Programs > EPSON > EPSON Scan > EPSON
Mac OS X:
Select Applications > Epson Software > EPSON Scan.
The EPSON Scan window opens. Epson Scan offers Office Mode and Professional Mode. See
Scanning 88
AL-MX300 Series User's Guide
Scanning in Office Mode
Office Mode lets you quickly scan text documents without previewing your image.
Note:
❏ If you install Epson Scan in Windows Server 2012 and Server 2008, you must have been done install
to Desktop Experience.
❏ See the Help for more details on Epson Scan.
instructions.
3. Select Office Mode in the Mode list.
4. Select the Document Source setting.
5. Select the size of your original as the Size setting.
6. Select the Image Type setting.
Scanning 89
AL-MX300 Series User's Guide
7. Select an appropriate resolution for your original(s) as the Resolution setting.
8. Click Scan.
9. In the File Save Settings window, select the Type setting and then click OK.
Note:
❏ If the Show this dialog box before next scan check box is cleared, Epson Scan starts scanning
immediately without displaying the File Save Settings window.
❏ You can create a password protected PDF file. Select the Security tab in PDF Plug-in Settings. See
the Help for more details on Epson Scan.
❏ When you select Skip Blank Pages, any blank pages in the document are not scanned.
Your scanned image is saved.
Scanning in Professional Mode
ProfessionalModegivesyoutotalcontrolofyour scanningsettingsandletsyoucheckthechangesyou
have made in a preview image. This mode is recommended for advanced users.
Note:
❏ IfyouwanttoinstallEpsonScanonWindowsServer2012orServer2008, youhavetoinstallDesktop
Experience first.
❏ See the Help for more details on Epson Scan.
instructions.
Scanning 90
AL-MX300 Series User's Guide
3. Select Professional Mode in the Mode list.
4. Select the type of original(s) you are scanning as the Document Type setting.
5. Select the Document Source setting.
6. Select Photo or Document as the Auto Exposure Type setting.
7. Select the Image Type setting.
8. Select an appropriate resolution for your original(s) as the Resolution setting.
Scanning 91
AL-MX300 Series User's Guide
9. Click Preview to preview your image(s). The Preview window opens and displays your image(s).
Note for the Automatic Document Feeder (ADF):
❏ When a document with multiple pages is loaded and Preview is selected, the first and second
pages are fed into the printer. Epson Scan pre-scans the first page and displays it in the Preview
window. The ADF then ejects the first and second pages. Place these pages on top of the rest of the
pages, and then load the entire document into the ADF.
❏ The document page ejected by the ADF has not been scanned yet. Reload the entire document
into the ADF.
10. Select the size of the scanned image(s) as the Target Size setting if necessary. You can scan your
images at their original size, or you can reduce or enlarge their size by selecting Target Size.
11. Adjust the image quality if necessary. See “Image Adjustment Features” on page 93.
12. Click Scan.
13. In the File Save Settings window, select the Type setting and then click OK.
Note:
❏ If the Show this dialog box before next scan check box is cleared, Epson Scan starts scanning
immediately without displaying the File Save Settings window.
❏ You can create a password protected PDF file. Select the Security tab in PDF Plug-in Settings. See
the Help for more details on Epson Scan.
Your scanned image is saved.
Scanning 92
AL-MX300 Series User's Guide
Image Adjustment Features
Epson Scan offers a variety of settings for improving color, sharpness, contrast, and other aspects
affecting image quality.
See the Help for more details on Epson Scan.
Histogram Adjustment
Provides a graphical interface for adjusting highlight, shadow, and gamma levels
individually.
Tone Correction
Provides a graphical interface for adjusting tone levels individually.
Image Adjustment
Adjusts brightness and contrast and the balance of red, green, and blue colors in the
overall image.
Color Palette
Provides a graphical interface for adjusting mid-tone levels, such as skin tones,
without affecting the highlight and shadow areas of the image.
Scanning 93
AL-MX300 Series User's Guide
Unsharp Mask
Sharpens the edges of image areas for an overall clearer image.
Descreening
Removes rippled patterns (known as moiré) that can appear in subtly shaded image
areas such as skin tones.
Color Restoration
Backlight Correction
Dust Removal
Restores the colors in faded photos automatically.
Removes shadows from photos that have too much background light.
Removes dust marks from your originals automatically.
Scanning 94
AL-MX300 Series User's Guide
Text Enhancement
Enhances text recognition when scanning text documents.
Auto Area Segmentation
MakesBlack&Whiteimagesclearerandtextrecognitionmore accuratebyseparating
the text from the graphics.
Color Enhance
Enhance a certain color. You can select from red, blue, or green.
Previewing and Adjusting the Scan Area
Selecting a preview mode
Once you have selected your basic settings and resolution, you can preview your image and select or
adjust the image area in a Preview window. There are two types of preview.
❏ Normal preview displays your previewed image(s) in their entirety. You can select the scan area
and make any image quality adjustments manually.
❏ Thumbnail preview displays your previewed image(s) as thumbnail(s). Epson Scan automatically
locatestheedgesofyourscanarea, appliesautomaticexposuresettingstotheimage(s), androtates
the image(s) if necessary.
Scanning 95
AL-MX300 Series User's Guide
Note:
❏ Some of the settings that you change after previewing an image are reset if you change the preview
mode.
❏ Depending on your document type and the Epson Scan mode you are using, you may not be able to
change the preview type.
❏ If you preview image(s) without the Preview dialog displayed, image(s) are displayed in the default
preview mode. If you preview with the Preview dialog displayed, image(s) are displayed in the
preview mode that was displayed just before previewing.
❏ To resize the Preview window, click and drag the corner of the Preview window.
❏ See the Help for more details on Epson Scan.
Creating a marquee
A marquee is a moving dotted line that appears on the edges of your preview image to indicate the scan
area.
Do one of the following to draw a marquee.
❏ Todrawthemarqueemanually, positionthepointerintheareawhereyouwanttoplacethecorner
of your marquee and click. Drag the cross-hairs over the image to the opposite corner of the
desired scan area.
❏ Todrawthemarqueeautomatically, clickthe
autolocateicon. Youcanonlyusethisiconwhen
you are viewing a normal preview and you only have one document on the scanner glass.
❏ To draw the marquee at a specified size, type in a new width and height in the Document Size
setting.
Scanning 96
AL-MX300 Series User's Guide
❏ For best results and image exposure, make sure all sides of the marquee are located inside the
preview image. Do not include any areas around the preview image in the marquee.
Adjusting a marquee
You can move the marquee and adjust its size. If you are viewing a normal preview, you can create
multiple marquees (up to 50) on each image to scan different image areas as separate scan files.
To move the marquee, position your cursor inside the marquee. The pointer becomes a hand.
Click and drag the marquee to the desired location.
To resize the marquee, position your cursor over the edge or corner of the marquee.
The pointer becomes a straight or angled double-arrow. Click and drag the edge or corner to the
desired size.
To create additional marquees of the same size, click this icon.
To delete a marquee, click inside the marquee and click this icon.
To activate all marquees, click this icon.
Note:
❏ To restrict the movement of the marquee to vertical or horizontal only, hold down the Shift key as
you move the marquee.
❏ To restrict the size of the marquee to the current proportions, hold down the Shift key as you resize
the marquee.
❏ If you draw multiple marquees, make sure you click All in the Preview window before you scan.
Otherwise, only the area inside the last marquee you drew will be scanned.
Using Other Scanning Software from Your Computer
You can use any TWAIN-compliant scanning program, such as Adobe Photoshop Elements, to scan
with your scanner. You open the program, select Epson Scan, and scan. When you are finished
scanning, the scanned image opens in your scanning program so you can modify, print, and save it.
Scanning 97
AL-MX300 Series User's Guide
Document Capture Pro
Only available for Windows users.
This software allows you to rearrange pages or correct rotation for image data, and then save the data,
send it by e-mail, send it to a server, or send it to a cloud service. You can also register frequently used
scanning settings to simplify scanning operations.
You can download this software from the following Epson website.
How to Start
❏ Windows8:
Right-click on the Start screen, or swipe from the bottom or top edge on the Start screen, and
select All apps > Epson Software > Document Capture Pro.
❏ Windows7, Vista, and XP:
Select the start button or Start > All Programs or Programs > Epson Software > Document
Capture Pro.
How to Access the Help
Select Help from the menu on the software screen to display the Help.
Canceling Scanning
When you press the Stop button on the control panel, a scanning job in Scan mode is canceled.
TWAIN processing can be stopped by the Stop button only when you are scanning via a network.
When Cancel on the progress bar is clicked while scanning by Epson Scan, preview scanning or final
scanning is exited.
Scanning 98
AL-MX300 Series User's Guide
Chapter 5
Copying
Setting Originals to Copy
You can load the original either on the document table or in the Auto Document Feeder depending on
the type of the original. For details, see “Setting Your Originals” on page 50.
Note:
❏ Before scanning a document, remember to respect the rights of copyright owners. Do not scan
published text or images without first checking their copyright status.
❏ If documents are placed both in the Auto Document Feeder and on the document table, only the
documents in the Auto Document Feeder are scanned.
Basic Copying
Available paper sources:
❏ The available paper sources for copying are the same as that for printing. Depending on the paper
source, available paper types differ. When copying originals, you can only use the following paper
types.
MP tray:
Plain, SemiThk, Preprinted, Letterhead, Recycled, Color, Labels, Thick, ExtraThk, Envelope, Special
Paper cassette:
Plain, SemiThk, Preprinted, Letterhead, Recycled, Color, Labels, Thick, ExtraThk, Special
❏ You cannot copy onto coated paper and special paper such as postcard or envelopes.
Available original sizes:
*1
*2
*2
*2
❏ You can use A4, A5, A6 , B5, LT, HLT, LGL , GLT, GLG , EXE, and F4 size originals for
copying.
*1: Document table only
*2: ADF only
❏ The edge of the paper (4 mm from the horizontal and vertical paper ends) is not guaranteed for
printing.
Copying 99
AL-MX300 Series User's Guide
1. Make sure the printer is turned on and paper is loaded in the printer. For information on how to
2. Press the Copy button.
3. Place your original either on the document table or in the Auto Document Feeder. For details on
4. Specify the number of copies using the numeric keypad on the control panel.
5. Press the l or r button several times to select the Basic Settingtab and press the F1 button.
6. Select the paper source using the u or d button and press the OK button.
Note:
When MP tray is selected, specify the paper size and paper type in the MP Tray Settingsmenu.
7. Press the Start button.
The printer starts copying.
Note:
❏ To cancel copy job, press the Stop button on the control panel while a document is being copied,
and then press the F3 button to select Yes.
❏ Do not turn off the power or press another mode’s button while copying is in progress, as copying
may be performed incorrectly.
Copying 100
AL-MX300 Series User's Guide
Copy mode menu list
Tab
Item
Description
Basic Setting
Paper
Select a paper source that is loaded with the size of paper that you
want.
Zoom
Select the zoom ratio for copying. “Specifying the zoom ratio” on
Duplex
Print in the duplex mode. “Duplex Copying” on page 101
Set the copy image density.
Density
Doc Type
Quality
Select the type of the document. “Changing the copy quality” on
Other
Set RmvBckgrd, RmvMoire, and Contrast. “Changing the copy quality”
AdvnSetting1
Layout
Copy two single-sided or four single-sided originals onto a single
RmvShadow
BindMargn
ID Card
Remove the shadow when copying books.
Set a binding margin for copying.
AdvnSetting2
Copy both sides of an ID card in its original size, onto one sheet.
Full Copy
Adjust the copy ratio automatically to fit the printable area, even if the
document has no margins. “Full-page copy” on page 107
ScanCont.
Collate
Set this to continue copying additional documents after the current
document has finished being copied.
Print multiple copies of multiple pages of a document in order, and
collate into copy sets. “Collate Copying” on page 103
Duplex Copying
With duplex copying, you can create double-sided or single-sided copies from double-sided or
single-sided originals.
1. Press the Copy button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
Copying 101
AL-MX300 Series User's Guide
3. Specify the number of copies using the numeric keypad on the control panel.
4. Press the l or r button several times to select the Basic Settingtab and press the F3 button.
5. Select the type of duplex copying using the u or d button.
Setting
Description
Off
Normal copying.
Simplex>Duplex
Two single-sided originals are
printed onto each side of a single
sheet of paper.
Duplex>Duplex
Duplex>Simplex
Each side of a double-sided
originalisprintedoneachsideofa
sheet of paper.
Each side of a double-sided
original is printedontooneside of
a single sheet of paper.
6. Press the OK button.
Note:
If necessary, press the F1 to F3 buttons to specify the binding position of the original and output and
document orientation.
Copying 102
AL-MX300 Series User's Guide
7. Press the OK button, and then press the Start button.
The printer starts duplex copying.
Note:
When using the document table, place the second page of the document after Set Next Document
is displayed, and then press the Start button.
Collate Copying
With the collate copying function, multiple copies of multiple pages in a document are printed in
order and collated by copy set. Note that the factory default for Collateis On.
1. Press the Copy button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Specify the number of copies using the numeric keypad on the control panel.
4. Press the l or r button several times to select the AdvnSetting2tab, and then press the F4
button.
5. Select Onusing the u or d button and press the OK button.
6. Press the Start button.
The printer starts collate copying.
Copying 103
AL-MX300 Series User's Guide
Print Layout
With the layout printing, you can copy two single-sided originals onto a single page.
The following combination of paper size is available.
Document Size
Output Size
A4
A4, A5, Letter, Legal
A4, A5, Letter, Legal
A4, A5, Letter, Legal
A4, A5, Letter, Legal
A4, A5, Letter, Legal
A5
A6
Letter
Legal
1. Press the Copy button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Specify the number of copies using the numeric keypad on the control panel.
4. Press the l or r button several times to select the AdvnSetting1tab and press the F1 button.
5. Select Onusing the u or d button and press the OK button.
Note:
If necessary, specify the desired settings, such as Allocation Document Size, Select Paper,
Select Order, and Document Direction Selection.
6. Press the OK button, and then press the Start button.
The printer starts layout copying.
Copying 104
AL-MX300 Series User's Guide
Making Changes to Copy Settings
Changing the copy quality
1. Press the Copy button.
2. Press the l or r button several times to select the Qualitytab and press the F1 button.
3. Select the document type using the u or d button, and then press the OK button.
Note:
You can select the following document type settings for various types of documents. The default
setting is Text/Photo.
Document Type
Description
Auto
Detect document types and set the level for removing the background
automatically.
Text/Photo
Photo
Good formagazines and catalogs. Removes moirépatterns, sharpens outlines and
removes backgrounds.
Good for color photosor other color images. Accuratelyreproducesgradationand
subtle tonal variations.
High Quality
Good for documents containing fine information. Removes moiré patterns and
backgrounds. Although copying takes longer, higher quality is obtained.
Copying 105
AL-MX300 Series User's Guide
4. Press the F4 button.
5. Select the following items using u or d button, and then press the OK button.
Settings
Description
RmvBckgrd
You can adjust the density of the background by selecting from 5 levels (-2to 2).
The higher the level, the darker the image becomes. The default value is 0.
RmvMoire
Contrast
You can adjust the image quality in moiré patterns by selecting from 5 levels (-2to
2). The default value is 0.
Youcanadjusttheimagequalityin contrastbyselectingfrom7levels(-3to3). The
higher the level, the greater the contrast becomes. The default value is 0.
6. Specify the value using the l or r button, and then press the OK button.
Specifying the zoom ratio
1. Press the Copy button.
2. Press the l or r button several times to select the Basic Settingtab and press the F2 button.
3. Press the F1 button repeatedly to select either Fixedor Manual.
4. Specify the settings using the u or d button, and then press the OK button.
Copying 106
AL-MX300 Series User's Guide
Note:
❏ For the Fixed Zoomsetting, the following document zoom ratios are available.
Zoom Ratio Settings
HLT->LGL
Zoom
154%
141%
100%
78%
A5->A4
100% (default)
LGL->LT
A4->A5
70%
❏ For the Manual Zoomsetting, you can specify a zoom rate between 25% and 400%. You can also
use the numeric keypad to enter the value.
Full-page copy
1. Press the Copy button.
2. Press the l or r button several times to select the AdvnSetting2tab and press the F2 button.
3. Select Onusing the u or d button and press the OK button.
Canceling a Copy Job
Press the Stop button on the printer’s control panel, and then press the F3 button to select Yes.
Copying 107
AL-MX300 Series User's Guide
Chapter 6
Faxing (DNF Model Only)
Making Settings before Using Fax Function
Confirming settings
Before receiving or sending a fax, make sure that the appropriate settings for your fax are specified.
Press the Setting button on the control panel and check the settings in the Fax Settingsmenu.
Making transferring settings of received faxes
You can send received data to the following destinations:
❏ To a shared folder specified from the printer
❏ To an e-mail address specified from the printer
❏ To forward to another fax number
The following settings are required to send data to a shared folder:
❏ Received fax destination settings
❏ Folder address settings
The following settings are required to send data to an e-mail address:
❏ Received fax destination settings
❏ E-mail server settings
❏ E-mail address settings
The following settings are required to forward to another fax number:
❏ Forward number settings
Follow the instructions below for each setting.
Faxing (DNF Model Only) 108
AL-MX300 Series User's Guide
Received fax destination setting
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Fax Settingsand press the OK button.
3. Press the u or d button several times to select Reception Settingsand press the OK button.
4. Press the u or d button several times to select Fax Outputand press the OK button.
5. Select Folderor E-Mailand click the OK button.
When Folderis selected, continue the folder address setting.
When E-Mailis selected, continue the e-mail address setting.
Folder address setting
1. Press the u or d button several times to select Fax to Folder Settingsand press the OK
button.
3. Press the OK button.
E-mail server setting
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Common Settingsand press the OK button.
3. Press the u or d button several times to select E-mail Server Settingsand press the OK
button.
5. Press the OK button.
E-mail address setting
1. Press the u or d button several times to select E-mail Settingsand press the OK button.
Faxing (DNF Model Only) 109
AL-MX300 Series User's Guide
3. Press the OK button.
Forward number setting
1. Press the Setting button on the control panel.
2. Press the u or d button several times to select Fax Settingsand press the OK button.
3. Press the u or d button several times to select Reception Settingsand press the OK button.
4. Press the u or d button several times to select Fax Outputand press the OK button.
5. Select Forwardand click the OK button.
6. Press the u or d button several times to select Forward Numberand press the OK button.
7. Enter the forwarding destination fax number directly from the numeric keypad on the control
panel.
8. Press the OK button.
Sending Faxes
Loading documents
You can load the original either on the document table or in the Auto Document Feeder depending on
the type of the original. For details, see “Setting Your Originals” on page 50.
Note:
❏ Before scanning a document, remember to respect the rights of copyright owners. Do not scan
published text or images without first checking their copyright status.
❏ If documents are placed both in the Auto Document Feeder and on the document table, only the
documents in the Auto Document Feeder are scanned.
Faxing (DNF Model Only) 110
AL-MX300 Series User's Guide
Basics of sending faxes (automatic faxing)
1. Press the Fax button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Enter the recipient’s fax number directly from the numeric keypad on the control panel.
Note:
To avoid mis-sending, you can require that the number be entered again. Press the Setting button,
and then set Direct Dialing Limitsto Enter Twicein Transmission Settingsof the Fax
Settingsmenu.
4. Make the appropriate settings for your fax if necessary.
Basic Setting Tab
Item
Settings (default in bold)
A4 , LT , LGL
Document Size Selection
Image Quality Selection
ADF Duplex Selection
Fax Density Selection
Draft, Fine, Super Fine, Ultra Fine, Photo
Off (Simplex), On (Duplex)
-3 to 0 to 3
Advanced Tab
Item
Settings (default in bold)
Fax Speed
Send Fax Later
Fast(33,600bps), Medium(14,400bps), Slow(9,600bps)
On, Off
On: Specified Time 00:00 - 17:00 - 23:59
Continuous Scan from ADF
Off, On
5. Press the Start button to start the transmission.
Faxing (DNF Model Only) 111
AL-MX300 Series User's Guide
Manual faxing
You can send faxes, after confirming that the telephone line is connected to the receiving system, by
using the Onhook button or by attaching an external telephone to your printer.
If the printer is connected to a telephone, you can talk with the recipients before sending faxes.
1. Press the Fax button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Make the appropriate settings if necessary. For details about the settings, see “Basics of sending
4. Press the Onhook button, and then enter the recipient’s fax number directly from the numeric
keypad on the control panel.
Note:
❏ To avoid mis-sending, you can require that the number be entered again. Press the Setting
button, and then set Direct Dialing Limitsto Enter Twicein Transmission
Settingsof the Fax Settingsmenu.
❏ When using an external telephone, enter the number with the telephone.
5. Make sure that the telephone line is connected, and then press the Start button.
6. Select Manual Transmission, and then press the Start button to start the transmission.
Note:
When using an external telephone, hang up the handset after Hang Up Receiveris displayed.
Sending faxes using speed-dial
When a recipient fax number is registered on the printer, you can send a fax by choosing the desired
recipient from the speed-dial list in the LCD panel. You can register up to 500 recipient fax numbers
on the printer.
Note:
Before using the speed-dial function, you need to register recipient fax information in advance. For
Faxing (DNF Model Only) 112
AL-MX300 Series User's Guide
1. Press the Fax button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
3. Press the Address-book button on the control panel.
The registered recipient list appears in the LCD panel.
4. Press the F4 button to change the sort order, and select your desired recipient using the u, d, l,
and r buttons.
Note:
You can also select a group name for group-dial destinations.
5. Press the F1 button.
Note:
To select multiple recipients, repeat step 4 and step 5.
6. Press the OK button.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
7. Press the Start button to start the transmission.
Sending faxes using quick-dial
When a frequently used recipient fax number is assigned for the Quick-Dial button (1 to 12), you can
send fax to the recipient by simply pressing the corresponding Quick-Dial button.
Note:
Before using the quick-dial function, you need to register recipient fax information in advance. For
1. Place your original either on the document table or in the Auto Document Feeder. For details on
2. Press the Quick-Dial button on the control panel.
Faxing (DNF Model Only) 113
AL-MX300 Series User's Guide
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
4. Press the Start button to start the transmission.
Sending faxes using re-dial
You can send a fax to the last dialed number by simply pressing the Redial/Pause button.
Note:
Once the mode is changed to other than Fax mode, you cannot use the redial function.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
2. Press the Redial/Pause button on the control panel.
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
4. Press the Start button to start the transmission.
Sending faxes from your computer
You can send a fax directly from a computer, instead of printing documents on a computer and
loading them to the printer to be faxed.
To use this function, install EpsonNet PC-FAX from the Software Disc supplied with the printer. For
details on how to use, refer to its Help.
Note:
If your computer does not have a CD/DVD drive, go to the following Epson website to download and
install the software.
Faxing (DNF Model Only) 114
AL-MX300 Series User's Guide
The supported operation systems are Windows 8, 7, Vista, and XP.
Canceling faxes
Canceling while originals are being scanned
1. Press the Stop button.
A message is displayed in the LCD panel.
2. Press the F3 button to select Yes.
The transmission is canceled.
Canceling when originals are stored in memory
Whenthedocumentsarealreadystoredinthememory, theFaxMemory LEDlightsup. To cancelthe
stored jobs waiting to be sent, follow the instructions below.
1. Press the Fax Memory button.
2. Select Send Job Listusing the u or d button, and then press the OK button.
3. Select the job to be canceled using the u or d button, and then press the F1 button.
4. Press the F3 button to select Yes.
Faxing (DNF Model Only) 115
AL-MX300 Series User's Guide
The stored job is deleted.
Receiving Faxes
About the reception mode
You can select from the following reception modes for receiving a call with this printer.
To change the modes, press the Setting button and specify the Receive Modesetting of Reception
Setting item
Description
Auto (Default)
When a call is received, the printer automatically answers after a certain duration
specified by the Ext. Phone Countsettings.
Note that the external telephone rings duringthe specified durationif itis attached to
the printer.
Manual
When a call is received, the attached phone rings.
The printer never automatically answers, but you can answer it manually.
Basics of receiving faxes (automatic receiving)
When the printer receives a fax, the data is stored in the memory and printed automatically.
Note:
You cannot receive a fax under the following conditions.
❏ When you are scanning originals.
❏ When you are sending fax document from a computer.
Output paper size
The received fax can be printed in A4, Letter, or Legal. However, when the output paper size does not
match the received data size, the image of the received data is divided according to the output paper
size as follows.
Faxing (DNF Model Only) 116
AL-MX300 Series User's Guide
Received document size
A4
Cassette paper size
A4
Letter
Legal
Reduced*2
Reduced*2
A4
Letter
Legal
Trimmed*3
Divided*1
Divided*1
Trimmed*3
In the list above, a shaded area indicates the printable area and a vertical line in the shaded area
indicates the location of the header information (head of the original).
*1 Divided: Received image is output on 2 pages.
*2 Reduced: Received image is reduced to fit the paper.
*3 Trimmed: Both ends of the received image are trimmed.
Note:
WhenpaperisloadedinboththeMPtrayandtheoptionalpapercassetteandthePaper Sourcesetting
in Setup Menuis set to Auto, paper in the MP tray is used for printing.
Receiving faxes after you hear fax tones
This function is used to print fax data after answering the incoming call using the external telephone.
Faxing (DNF Model Only) 117
AL-MX300 Series User's Guide
1. Answer the call with the telephone when you receive a call.
2. Press the Start button.
3. Select Manual Receptionand press the Start button.
The received data are printed by page as they are received.
Note:
After Hang Up Receiveris displayed, hang up the handset.
Sending received faxes to memory
When the printer receives a fax, you can temporarily store the data in the printer’s memory without
printing it.
To use this function, the Memory Receptionsetting in the Reception Settingsof the Fax
Note:
You can set the start time and end time for the memory perception so that, for example, the faxes received
during the night can be printed the next morning.
1. Press the Fax button.
2. Press the l or r button several times to select the Functiontab and press the F2 button.
3. Select Onusing the u or d button and press the OK button.
Faxing (DNF Model Only) 118
AL-MX300 Series User's Guide
Sending received faxes to a shared folder
This function is used to convert the received fax data to a PDF format file and send it to a specified
shared folder on the network.
To use this function, the Fax Outputsetting in the Reception Settingsof the Fax Settings
Note:
❏ The folder address settings and network settings are also required before using this function. For
❏ When the printer receives a fax, the data is sent to the destination registered in Fax to Folder
Sending received faxes by e-mail
This function is used to send the received fax data as an e-mail attachment by converting the data to a
PDF format file.
To use this function, the Fax Outputsetting in the Reception Settingsof the Fax Settings
Note:
❏ The e-mail settings and network settings are also required to use this function. For details, see
❏ When the printer receives a fax, the data is sent to the destination registered in E-mail Settings
Forwarding a received fax
This function is used to forward the received fax data to a specified fax destination.
To use this function, the Fax Outputsetting in the Reception Settingsof the Fax Settings
Faxing (DNF Model Only) 119
AL-MX300 Series User's Guide
Note:
When the printer receives a fax, the data is sent to the destination registered in Forward Numberin the
Deleting received faxes
When received documents are stored in the printer’s memory, the Fax Memory LED lights up. To
delete the stored jobs, follow the instructions below.
1. Press the Fax Memory button.
2. Select Receive Job Listusing the u or d button, and then press the OK button.
3. Select the job to be deleted using the u or d button, and then press the F1 button.
4. Press the F2 button to select Yes.
The stored job is deleted.
Using Advanced Functions
Displaying fax history information
1. Press the Fax Memory button.
2. SelectSend Job HistoryorReceive Job Historyusingtheuordbutton, andthenpressthe
OK button.
The fax job history is displayed.
Faxing (DNF Model Only) 120
AL-MX300 Series User's Guide
3. Press the F4 button to close the fax job history.
Printing fax reports
You can print the fax reports such as speed-dial list, communication report or memory job
information to check various information and transmission results.
1. Press the Setting button.
2. Press the u or dbutton several times to select the System Report Printing, and then press the
OK button.
3. Press the u or d button to select the report or list you want to print, and then press the OK button.
Printing starts.
Displaying memory
This function is used to check the printer’s memory utilization.
1. Press the Fax button.
2. Press the l or r button several times to select the Functiontab and press the F1 button.
The memory utilization information is displayed.
Faxing (DNF Model Only) 121
AL-MX300 Series User's Guide
Registering Recipients
When sending faxes using the speed-dial or quick-dial function, you need to register the recipient
information in advance. You can register recipients from the Address Settingsmenu on the
control panel.
Important:
c While the Fax Memory LED is lit, do not change a recipient setting.
Using the Address Settings menu on the control panel
Registering for speed-dial
You can register up to 500 recipients in the speed-dial list.
1. Press the Setting button on the control panel.
2. Press the uor dbutton several times to select Address Settings, and then press the OK button.
3. Press the u or d button several times to select Fax No., and then press the OK button.
4. Press the u or d button several times to select Speed Dial Settings, and then press the OK
button.
5. Select an unregistered number displayed as Not Registeredusing the u and d buttons, and
then press the F3 button to select Editing.
Note:
To change a registered recipient to another one, select the number that you want to replace, and then
press the F3 button.
6. Enter the phone number you want to register, and then press the OK button.
Note:
To correct a number while entering it, use the l and r buttons to select a character and the Clear
button to delete it.
7. Enter a recipient name using the numeric keypad, and then press the OK button.
Faxing (DNF Model Only) 122
AL-MX300 Series User's Guide
Note:
❏ You can enter up to 20 characters for a recipient name.
❏ To correct a name while entering it, use the l and r buttons to select a character and the Clear
button to delete it.
❏ Group-dial allows you to send documents to several people at the same time. You can create a
group-dial list using EpsonNet Config.
The recipient is added to the speed-dial list.
Registering for quick-dial
You can assign recipients from the registered speed-dial list for the Quick-Dial buttons (1 to 12).
1. Press the Setting button on the control panel.
2. Press the uor dbutton several times to select Address Settings, and then press the OK button.
3. Press the u or d button several times to select Fax No., and then press the OK button.
4. Press the u or d button several times to select Quick Dial Settings, and then press the OK
button.
5. Select an unregistered number displayed as Not Registeredusing the u and d buttons, and
then press the F3 button to select Editing.
Note:
To change a recipient assigned for the quick-dial, select the number that you want to change a
recipient, and then press the F3 button.
6. Select a recipient you want to assign for quick-dial using the u and d buttons, and then press the
OK button.
Note:
Press the F4 button to confirm the detailed information about the registered speed-dial.
The selected recipient is assigned for the quick-dial.
Faxing (DNF Model Only) 123
AL-MX300 Series User's Guide
Deleting all recipients
This function is used to collectively delete all the recipients registered to the speed-dial list or assigned
to quick-dial.
1. Press the Setting button on the control panel.
2. Press the uor dbutton several times to select Address Settings, and then press the OK button.
3. Press the u or d button several times to select Fax No., and then press the OK button.
4. Press the u or d button several times to select Clear All Address, and then press the OK
button.
5. Press the F3 button to select Yes.
All the recipients registered to the speed-dial list or assigned to quick-dial are deleted.
Faxing (DNF Model Only) 124
AL-MX300 Series User's Guide
Chapter 7
Using the Control Panel
Selecting a Mode
You can use this printer as a printer, copier, fax, and scanner. When the printer is turned on, it enters
the Copy mode (default setting) automatically. When using one of these functions, select your desired
function by pressing the corresponding Mode button on the control panel. Each mode’s main screen
appears in the LCD panel as you select the mode.
There are three Mode buttons (for DN model) or four Mode buttons (for DNF model) on the control
panel that allow you to switch between the modes: Copy mode, Scan mode, Print mode, and Fax mode
(DNF model only). In addition, you can also use the Setting button for making various settings for
this printer. For details on the menu, see “Using the Control Panel Menu” on page 126.
DN model
DNF model
Note:
❏ The fax function is available for DNF model only.
❏ You can change the mode to enter when the printer is turned on in the Default Modesetting. For
Using the Control Panel 125
AL-MX300 Series User's Guide
❏ Ifnobuttonispressed for more than 3 minutes, any changesmade are canceled andthemodereturns
to the mode set for the Default Modesetting.
❏ You cannot switch between modes in the following cases.
- When an error has occurred on the whole system such as a service call error or a system error.
- When a job is being processed in any of the modes.
❏ Fax reception is available even while copying.
❏ For DNF model, TWAIN scan (only when the scanner is not operating) and printing using the host
interface are available even in the Fax mode.
Using the Control Panel Menu
Accessing the each menu
1. Press the Setting button on the control panel.
2. Use the u and d buttons to select your desired setup menu, and then press the OK button to view
the items in the Settingsmenu.
3. Use the u and d buttons to scroll through the menus, and then press the OK button to view the
items available for the menu.
4. Use the u and d buttons to scroll through the items, and then press the OK button to carry out the
operation indicated by the selected item, or to view the values available for the item.
5. Use the u and d buttons to specify the value.
6. Press the Return button several times to exit the menu.
Note:
Use the same procedure in other modes to specify a value or do operations.
Using the Control Panel 126
AL-MX300 Series User's Guide
How to register menus as job memory
Registering a menu as a standard menu
You can register a frequently used setting menu as a standard menu for each mode, so that the menu
appears on the first screen when you press the Mode buttons.
1. Press the Copy, Scan, or Fax button on the control panel.
2. Make the desired setting.
3. Press the Setting button on the control panel.
4. Press the u or d button several times to select Copy Settings, Scan Settings, or Fax
Settings, and then press the OK button.
5. Press the u or d button several times to select Standard Copy Settings, Standard Scan
Settings, or Standard Fax Settings, and then press the OK button.
6. Press the F3 button to select Yes.
The menu is registered as a standard menu.
Registering and calling the job memory
You can register frequently used settings for Copy mode and Scan mode as job memories. The
registered settings can be called up when copying or scanning.
Registering a job memory
1. Press the Copy or Scan button on the control panel.
2. Make the desired setting.
3. Press the Job Memory button on the control panel.
4. Press the u or d button several times to select a job memory.
5. Press the F2 button to select Register.
Note:
To delete the registered settings in the job memory, press the F2 button.
Using the Control Panel 127
AL-MX300 Series User's Guide
6. Press the F2 button to select Yes.
The settings are registered in a job memory.
7. Press the F4 button to exit the menu.
Calling up the job memory
1. Press the Job Memory button on the control panel.
2. Press the u or d button several times to select a desired job memory.
3. Press the F1 button to select Call.
The registered settings are reflected.
Language Settings
Item
Settings (default in bold)
English, Français, Deutsch, Italiano, ESPAÑOL, Nederlands, Português,
Language
,
System Settings
System Information
The following information is displayed.
❏ Main Version
❏ Fax Version
❏ MCU Version
❏ Serial No
❏ Memory
Using the Control Panel 128
AL-MX300 Series User's Guide
❏ MAC Address
System Report Printing
Item
Values
Print Configuration Status Sheet
Print Supplies Status Sheet
Print Usage History Sheet
-
-
-
-
Reserve Job List*1
Network Status Sheet*2
Job Memory List
E-mail Address List
Folder List
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Fax Dial List
Fax Log
Fax Job List
Fax Protocol Trace
Check Fax Connection
PS3 Status Sheet
PS3 Font List
PCL Font Sample
ESCP2 Font Sample
FX Font Sample
I239X Font Sample
*1
Available only when the jobs are stored by using the Reserve Job feature.
*2
Available only when the Network I/Fsetting in Network Menuis set to On.
Print Configuration Status Sheet
Using the Control Panel 129
AL-MX300 Series User's Guide
Prints a sheet showing the current printer settings and installed options. This sheet can be useful to
confirm whether option have been installed correctly.
Print Supplies Status Sheet
Prints a sheet showing information about consumables.
Print Usage History Sheet
Prints a sheet showing the history of the printer’s usage.
Reserve Job List
Prints a list of reserved print jobs stored on the printer’s memory.
Network Status Sheet
Prints a sheet showing the working status of the network.
Job Memory List
Prints a sheet showing the current job memory settings.
E-mail Address List
Prints a list of registered mail addresses.
Folder List
Prints a sheet showing information about registered folders in which data is saved.
Fax Dial List
Prints a list of speed-dial, quick-dial, and group-dial numbers.
Fax Log
Prints Fax Logand Fax Output Report.
Fax Job List
Prints waiting fax job information, such as faxes that are queued for transmission or printing.
Using the Control Panel 130
AL-MX300 Series User's Guide
Fax Protocol Trace
Prints a protocol log for fax communications.
Check Fax Connection
Diagnosis the fax connection and prints a report.
PS3 Status Sheet
Prints a sheet showing information about the PS3 mode such as the PS3 version.
PS3 Font List, PCL Font Sample, ESCP2 Font Sample, FX Font Sample, I239X Font Sample
Prints a sample of the fonts available for your selected printer emulation.
Common Settings
Setup Menu
Item
Settings (default in bold)
10, 20, 30, 60, 90, 120, 150, 180, 300, 600 sec
Off, 10, 20, 30, 60 sec
0, 5 to 60 to 300 in increments of 1
Normal, Last
Operation Time Out
Operation Time
I/F Time Out
MP Tray Priority
Manual Feed
Copies
Off, 1st Page, EachPage
1 to 999
Duplex*1
Off, On
Binding*1
Long Edge, Short Edge
Front, Back
Off, On
Start Page*1
Skip Blank Page*2
Auto Eject Page*2
Off, On
Using the Control Panel 131
AL-MX300 Series User's Guide
Item
Settings (default in bold)
Off, On
Size Ignore
Auto Cont
Off, On
Page Protect*3
Auto, On
A4/LT Auto Switching
Extended Mode
LCD Contrast
On, Off
Off, On
0 to 7 to 15
Auto, Off
Off, On
LCD Backlight
B/W Reverse Disp.
Sound Volume
Operation Sound: Off, Medium, Large
Finish Sound: Off, Medium, Large
Caution Sound: Off, Medium, Large
RAM Disk
Off, Normal, Maximum
Odd Page, 1 Page, Off
No, Yes
Convert to Simplex
Confirm Media Type
Job Information*4
Local Time Diff.
Time Setting
Display Pattern 1, Display Pattern 2, Off
-14:00 … 0:00 … +14:00
2010/ 01/01 00:00 to 2098/12/31 23:59
DD/MM/YY, MM/DD/YY, YY/MM/DD
Date Format
*1
*2
*3
*4
Available only when you use A4 or LT size paper.
Available only for ESC/Page, ESC/P2, FX, or I239X mode.
Not available in PS3 and PCL.
If
or
is selected as the language when the printer is turned on for the first time after you purchase it,
the default value is Off. If another language is selected, the default value is Display Pattern 1.
Operation Time Out
Set the time till the time out that occurs after finishing operations on the control panel. If the specified
time has passed, the screen will return to the mode set for the Default Modesetting.
Operation Time
Using the Control Panel 132
AL-MX300 Series User's Guide
Set the time in which operations for the control panel are not interrupted by another print job. If the
specified time has passed, the other print job is executed.
I/F Time Out
Specifies the length of the time, in seconds, before a time out when interfaces are being switched
automatically. The time before a time out occurs is the length of time from the point when no data is
being received from an interface until the point of switching the interface. If the printer has a print job
when switching the interface, the printer prints the print job.
MP Tray Priority
This setting determines whether the MP tray has the highest or lowest priority when Auto is selected
as the Paper Source setting in the printer driver. When Normalis selected as the MP Tray Priority,
the MP tray has the highest priority as the paper source. If you select Last, the MP tray has the lowest
priority.
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether duplex printing starts from the front or back of the page.
Skip Blank Page
Enables you to skip blank pages when printing.
Auto Eject Page
Using the Control Panel 133
AL-MX300 Series User's Guide
Specifies whether or not to eject paper when the limit specified in the I/F Time Outsetting is
reached. The default is Off, which means paper is not ejected when the time-out limit is reached.
Size Ignore
If you want to ignore a paper size error, select On. When you turn this item on, the printer keeps
printing even if the image size exceeds the printable area for the specified paper size. This may cause
smudges because of the toner that is not transferred onto the paper properly. When this item is turned
off, the printer stops printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues printing after a certain period of
time when one of the following errors occurs: Paper Set, Print Overrun, or Memory Overflow.
When this option is off, you must press the Start button to resume printing.
Page Protect
Allocates additional printer memory for printing data, as opposed to receiving it. You may need to
turnthissettingonifyouareprintingaverycomplexpage. IfaPrint Overrunerrormessageappears
on the LCD panel during printing, turn this setting on and reprint your data. This reduces the amount
of memory reserved for processing data so your computer may take longer to send the print job, but it
will allow you to print complex jobs. Page Protectusually works best when Autois selected.
Note:
Changing the Page Protectsetting reconfigures the printer’s memory, which causes any downloaded
fonts to be deleted.
A4/LT Auto Switching
When A4 or Letter size paper is selected for printing and there is no paper source set to the selected
paper size, the printout is output in an alternate paper size (Letter for A4, or A4 for Letter).
Extended Mode
If Onis selected, printing continues even after the Replace Toner Cartridgeerror message
appears on the LCD panel. However, the printing quality is not guaranteed, and the service life of the
photoconductor unit may be affected. When a new toner cartridge is installed, the setting
automatically returns to Off.
LCD Contrast
Using the Control Panel 134
AL-MX300 Series User's Guide
Adjusts the contrast of the LCD panel. Use the u and d buttons to set the contrast between 0(lowest
contrast) and 15(highest contrast.)
LCD Backlight
If Autois selected, the LCD backlight lights. Also, it turns off during Sleep or Deep Sleep mode. If Off
is selected, the LCD backlight is always off.
B/W Reverse Disp.
Enables you to reverse the color of the LCD panel.
Sound Volume
Specifies the volume of sound produced when a button is pressed, fax or scan operation is completed,
or an error occurs.
RAM Disk
Specifies the amount of RAM to be used for the Reserve Job function.
Convert to Simplex
In the duplex printing mode, specifies whether to print the last page of a job in one side printing mode.
Setting Odd Pageor 1 Pagecan prevent the last page from being printed on an unexpected page
when you are printing on preprinted paper or hole-punched paper.
Odd Page: 1-page jobs or the last page of a job with an odd number of pages are printed in one side
printing mode.
1 Page: 1-page jobs are printed in one side printing mode.
Off: The last page of all jobs (including 1-page jobs or jobs with an odd number of pages) is printed in
duplex printing mode.
Confirm Media Type
Displays a message when the paper type in the tray selected for printing is different from that selected
on Paper Type in the printer driver.
Job Information
Using the Control Panel 135
AL-MX300 Series User's Guide
Print Job Checkcan be displayed when you press the Status button on the control panel, which
allows you to skip or cancel print jobs on the job list. The pattern of items displayed on the control
panel can be selected from Display Pattern 1and Display Pattern 2. Do not select Display
Pattern 1when the following languages are selected as Languageon Setup Menu:
,
.
Local Time Diff.
Specifies the current date and time by entering the time difference from Greenwich Mean time.
Time Setting
Specifies the current date and time by entering them directly.
Date Format
Specifies the format to display the date.
USB Menu
Item
Settings (default in bold)
USB I/F*1
On, Off
USB Speed*1 *2
Buffer Size*1 *2
HS, FS
Normal, Maximum, Minimum
*1 After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is
reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is
turned on again.
*2 Available only when USB I/Fis set to On.
USB I/F
Allows you to activate or deactivate the USB interface.
USB Speed
AllowsyoutoselecttheoperationmodeofUSBinterface. Selecting HSisrecommended. SelectFSifHS
does not work on your computer system.
Buffer Size
Using the Control Panel 136
AL-MX300 Series User's Guide
Determines the amount of memory to be used for receiving data and printing data. If Maximumis
selected, more memory is allocated for receiving data. If Minimumis selected, more memory is
allocated for printing data.
Note:
❏ To activateBuffer Sizesettings, you must turn off the printer for more than fiveseconds then turn
❏ Resetting the printer erases all print jobs. Make sure the Data light is not flashing when you reset the
printer.
Network Menu
See the Network Guide for each setting.
USB Host Menu
This menu allows you to use the USB Host printing function. For instructions on using the function,
Item
Settings (default in bold)
USB Host*
On, Off
*
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again. While it is
reflected in the Status Sheet and EJL read-back, the actual change takes effect after a warm boot or after the power is
turned on again.
USB Host
Enables you to print directly from a USB memory via a USB Host interface.
E-mail Server Settings
Item
Settings (default in bold)
Off, POP before SMTP, SMTP Auth*1
Up to 30 characters
Auth Method
Auth Account*2
Using the Control Panel 137
AL-MX300 Series User's Guide
Item
Settings (default in bold)
Auth Password*2
Sender Address
Up to 20 characters
Up to 255 characters
Up to 255 characters
SMTP Server Addr*3
SMTP Srvr Port Num
1 ... 25 ... 65535
POP3 Server Addr*3
POP3 Srvr Port Num
Connection Test
Up to 255 characters
1 ... 110 ... 65535
-
*1 Authenticates automatically using the LOGIN, PLAIN, or CRAM-MD5 method.
*2 Common for both SMTP and POP3.
*3 Either an IP address or a host name can be entered.
Note:
❏ If you have any questions about mail server settings, ask the mail server administrator.
❏ The following characters can be entered to Auth Account, Auth Password, Sender Address,
SMTP Server Addr, and POP3 Server Addr, using the Numeric Keyboard.
Alphabetic/Symbol
@ , . /
Numeric
1
2
3
4
5
6
7
8
9
0
*
1
2
3
4
5
6
7
8
9
0
*
a b c A B C
d e f D E F
g h i G H I
j k l J K L
m n o M N O
p q r s P Q R S
t u v T U V
w x y z W X Y Z
Space
Using the Control Panel 138
AL-MX300 Series User's Guide
Alphabetic/Symbol
Numeric
#
- . * # ! ” , ; : ` _ = / | ’ ?
#
$ @ % & + ¥ ~ ^ ( ) [ ] { } < >
Energy Saver Menu
Item
Settings (default in bold)
1, 3, 5, 15, 30, 60, 120 min
On, Off
Time to Sleep
Deep Sleep Mode
Power Off Timer*
On, Off
Time to Off*
120, 180, 240, 360, 480 min
*
For DN models sold in the EU only
Time to Sleep
Specifies the length of the time until the printer enters the sleep mode or deep sleep mode if there are
no button operations and no jobs to be printed.
Deep Sleep Mode
When this setting is set to On, the printer switches into the deep sleep mode at the time specified in the
Time to Sleepsetting if the printer is not operated or receives no jobs. In the deep sleep mode, the
Power Saving button lights and more power is saved than when in the sleep mode.
Note:
The printer does not enter the deep sleep mode in the following cases:
- PS3is selected in Networkof Emulation Menu.
- MS Networkis set to Onin Network Menu.
To recover from the deep sleep mode, press the Power Saving button. The printer recovers
automatically when it receives a print job.
Power Off Timer (Power Off mode) (For DN models sold in the EU only)
When this setting is set to On, the printer automatically turns off at the time specified in the Time to
Offsetting. The printer does not enter the power off mode if it is receiving or sending data.
Using the Control Panel 139
AL-MX300 Series User's Guide
The printer recovers from the power off mode when the power switch is turned on.
Time to Off (For DN models sold in the EU only)
Specifies the length of the time until the printer enters the power off mode if there are no button
operations and no jobs to be printed.
Note:
You can adjust the time before power management is applied. Any increase will affect the product's
energy efficiency. Please consider the environment before making any change.
Reset Menu
Clear Warning
Clears warning messages that show errors except for these that occur from consumable products or
mandatory-replacement parts.
Clear All Warnings
Clears all warning messages that appear on the LCD panel.
Reset All
Stops printing and clears the printer memory. The print jobs received from all interfaces are erased.
Note:
Performing Reset Allclears print jobs received from all interfaces. Be careful not to interrupt someone
else’s job.
Reset Fuser Counter
Resetthefuserunitlife counterwhenyoureplacethefuserunit. Forinstructionsonreplacingthefuser
unit, see the documentation supplied with the fuser unit.
Using the Control Panel 140
AL-MX300 Series User's Guide
Printer Settings
Tray Menu
Item
Settings (default in bold)
MP Tray Size
MP Tray Type
A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, DL, C6, CTM
Plain, SemiThk, Preprinted, Letterhead, Recycled, Color, Labels, Thick,
ExtraThk, Envelope, Special
Cassette1 Size
Cassette2 Size*
A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, CTM
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, CTM
Cassette1 Type/ Cassette2 Type*
Plain, SemiThk, Preprinted, Letterhead, Recycled, Color, Labels, Thick,
ExtraThk, Special
MP Tray AutoSel
On, Off
Cassette1 AutoSel/Cassette2 AutoSel*
On, Off
*
Available only when the optional paper cassette unit is installed.
MP Tray Size
Select your paper size from this menu.
MP Tray Type
Lets you set the paper type loaded in the MP tray.
Cassette1 Size/ Cassette2 Size
Displays the paper size loaded in the standard and optional paper cassettes.
Cassette1 Type/ Cassette2 Type
Lets you select the paper type loaded in the standard and optional paper cassettes.
MP Tray AutoSel/ Cassette1 AutoSel/ Cassette2 AutoSel
SpecifieswhetherthetraycanbeselectedforprintingwhenPaperSourceisselectedforAutoSelection
in the printer driver.
Using the Control Panel 141
AL-MX300 Series User's Guide
Printing Menu
Note:
The settings are overridden by the settings made in the printer driver.
Item
Settings (default in bold)
A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, DL, C6, CTM*1
Page Size
Wide A4
Off, On
Media Type
Unspecified, Plain, SemiThk, Preprinted, Letterhead, Recycled, Color, Labels, Thick, ExtraThk,
Envelope, Special
Page Side
Front, Back
Auto, MP Tray, Cassette1, Cassette2*2
Port, Land
Paper Source
Orientation
Resolution
RITech
300, 600, 1200
On, Off
Toner Save
Density
Off, On
1 to 3 to 5
Emphasize Thin Lines
Top Offset
Left Offset
T Offset B
Off, On
-99.0 ... 0.0 ... 99.0mm in 0.5 increments
-99.0 ... 0.0 ... 99.0mm in 0.5 increments
-99.0 ... 0.0 ... 99.0mm in 0.5 increments
-99.0 ... 0.0 ... 99.0mm in 0.5 increments
L Offset B
*1
*2
The minimum and maximum of custom paper sizes vary depending on the tray.
(MP Tray/Standard lower paper cassette)
Minimum: 76.2 × 127.0 mm, maximum: 215.9 × 355.6 mm
(Optional paper cassette)
Minimum: 139.7 × 210.0 mm, maximum: 215.9 × 355.6 mm
Available only when the optional paper cassette unit is installed.
Page Size
Specifies the paper size.
Wide A4
Using the Control Panel 142
AL-MX300 Series User's Guide
Selecting Ondecreases the left and right margins to 3.4 mm.
Media Type
Specifies the paper type.
Page Side
Select Frontwhen printing on the front of normal paper (Plain), thick paper (Thick), or extra thick
paper (Extra Thick).
Paper Source
Specifies whether paper feeds into the printer from the MP tray, the standard lower paper cassette, or
the optional paper cassette unit.
If you select Auto, paper feeds from the paper source containing paper that matches your Paper Size
setting.
Orientation
Specifies whether the page is printed in portrait or landscape orientation.
Resolution
Specifies the printing resolution.
RITech
Turning on RITech (Resolution Improvement Technology) produces smoother and crisper lines,
text, and graphics.
Toner Save
When this setting is selected, the printer saves toner by substituting a gray shade for the black inside of
characters. The characters are outlined in full black on the right and lower edges.
Density
Specifies the printing density.
Emphasize Thin Lines
Using the Control Panel 143
AL-MX300 Series User's Guide
Adjusts the weight of thin lines so they are printed clearly.
Top Offset
Makes fine adjustments to the vertical printing position of the page.
Important:
c Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you
may damage the printer.
Left Offset
Makes fine adjustments to the horizontal printing position of the page. This is useful for fine
adjustments.
Important:
c Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you
may damage the printer.
T Offset B
Adjusts the vertical printing position on the back of the paper when printing on both sides. Use this if
the printout on the back is not where you expected.
L Offset B
Adjusts the horizontal printing position on the back of the paper when printing on both sides. Use this
if the printout on the back is not where you expected.
Emulation Menu
Note:
You can specify different emulations for each interfaces.
Item
Settings (default in bold)
USB
Auto, ESCP2, FX, I239X, PS3, PCL
Auto, ESCP2, FX, I239X, PS3, PCL
Network
Using the Control Panel 144
AL-MX300 Series User's Guide
PCL Menu
These settings are available in the PCL mode.
Item
Settings (default in bold)
Resident, Download*1
FontSource
Font Number
Pitch*2
0… 65535 (depending on your settings)
0.44 … 10.00 … 99.99cpi in 0.01cpi increment
Height*2
SymSet
4.00 … 12.00 … 999.75pt in 0.25pt increment
IBM-US, Roman-8, Roman-9, ECM94-1, 8859-2 ISO, 8859-9 ISO, 8859-10ISO, 8859-15ISO,
PcBlt775, IBM-DN, PcMultiling, PcE.Europe, PcTk437, PcEur858, Pc1004, WiAnsi, WiE.Europe,
WiTurkish, WiBALT, DeskTop, PsText, VeInternati, VeUS, MsPublishin, Math-8, PsMath, VeMath,
PiFont, Legal, UK, ANSI ASCII, Swedis2, Italian, Spanish, German, Norweg1, French2, Windows,
McText, Hebrew7, 8859-8 ISO, Hebrew8, Arabic8, OCR A, OCR B, Pc866Cyr, Pc866Ukr, WinCyr,
ISOCyr, Pc8Grk, Pc851Grk, WinGrk, ISOGrk, Greek8, Pc862Heb, Pc864Ara, HPWARA
Form
5 … 64 … 128Lines
CR, CR+LF
CR Function
LF Function
Tray Assign
LF, CR+LF
4K, 5S, 4
*1 Available only when downloaded fonts are available.
*2 Depending on the font that has been selected.
FontSource
Sets the default font source.
Font Number
Sets the default font number for the default font source. The available number depends on the settings
you made.
Pitch
Specifies the default font pitch if the font is scalable and of fixed-pitch. You can select from 0.44to
99.99cpi (characters per inch), in 0.01-cpi increments. This item may not appear depending on the
FontSourceor Font Numbersettings.
Using the Control Panel 145
AL-MX300 Series User's Guide
Height
Specifies the default font height if the font is scalable and proportional. You can select from 4.00to
999.75points, in 0.25-pointincrements. This itemmaynotappeardependingonthe FontSourceor
Font Numbersettings.
SymSet
Selects the default symbol set. If the font you selected in FontSourceand Font Numberis not
available in the new SymSet setting, the FontSourceand the Font Numbersettings are automatically
replaced with the default value, IBM-US.
Form
Selects the number of lines for the selected paper size and orientation. This also causes a line spacing
(VMI) change, and the new VMI value is stored in the printer. This means that later changes in the
Page Sizeor Orientationsettings cause changes in the Formvalue, based on the stored VMI.
CR Function, LF Function
These functions are included for users of particular operating systems, such as UNIX.
Tray Assign
Changes the assignment for the paper source select command. When 4is selected, the commands are
set as compatible with the HP LaserJet 4. When 4Kis selected, the commands are set as compatible
with the HP LaserJet 4000, 5000, and 8000. When 5Sis selected, the commands are set as compatible
with the HP LaserJet 5S.
PS3 Menu
Item
Settings (default in bold)
Error Sheet
Image Protect
Binary
Off, On
Off, On
Off, On
Text Detection
PDF Page Size
Off, On
Auto, A4, A5, A6, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, DL, C6
Using the Control Panel 146
AL-MX300 Series User's Guide
Error Sheet
When you select On, the printer prints out an error sheet when an error occurs in the PS3 mode or
when the PDF file you tried to print is not a supported version.
Image Protect
When Onis selected, the print quality is not reduced even with insufficient memory. In that case,
Memory Overflowis displayed and the printing is stopped.
When Offis selected, the print quality is reduced with insufficient memory. In that case, Image
Optimumis displayed and the printing is continued.
Binary
Specifies the data format. Select Onfor the Binary data and select Offfor the ASCII data.
Note:
Binary can only be used with network connection.
To use the Binary data, make sure your application supports Binary data and that SEND CTRL-D
Before Each Job and SEND CTRL-D After Each Job are set to No.
When this setting is set to On, you cannot use TBCP (Tagged binary communication protocol) in the
printer driver settings.
Text Detection
When you select On, the text file is converted to a PostScript file when printing. This setting is available
only when you select PS3in the Emulation Menu.
PDF Page Size
Specifies the paper size when you send the PDF file directory from a computer or some other device. If
Autois selected, the paper size is determined based on the size of the first page that is printed.
ESCP2 Menu
Item
Settings (default in bold)
Font
Pitch
Courier, Prestige, Roman, Sans serif, Roman T, Orator S, Sans H, Script, OCR A, OCR B
10 cpi, 12cpi, 15cpi, Prop.
Using the Control Panel 147
AL-MX300 Series User's Guide
Item
Settings (default in bold)
Off, On
Condensed
T.Margin
Text
0.40 ... 0.50 ... 1.50inch in 0.05-inch increments
1 ... 66 ... 81Lines
CGTable
PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic,
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO, PcSl437,
PcTurkish1, 8859-9 ISO, Mazowia, CodeMJK, PcGk437, PcGk851, PcGk869, 8859-7 ISO, PcCy855,
PcCy866, PcUkr866, PcLit771, Bulgarian, Hebrew7, Hebrew8, PcHe862, PcAr864, PcAr864Ara,
PcAr720, PcLit774, Estonia, ISO Latin2, PcLat866
Country
USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,
LatinAmeric, Korea, Legal
Auto CR
Auto LF
On, Off
Off, On
Bit Image
ZeroChar
Dark, Light, BarCode
0, (or the zero character with a slash)
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T.Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Using the Control Panel 148
AL-MX300 Series User's Guide
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the
Orientation, Page Size, or T.Marginsettings, the page length setting automatically returns to the
default for each paper size.
CGTable
Use the character generator (CG) table option to select the graphics character table or the italics table.
The graphics table contains graphic characters for printing lines, corners, shaded areas, international
characters, Greek characters, and mathematical symbols. If you select Italic, the upper half of the
character table is defined as italic characters.
Country
Use this option to select one of the fifteen international symbol sets. See the Font Guide for samples of
the characters in each country’s symbol set.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the
printing position goes beyond the right margin. If you select Off, the printer does not print any
characters beyond the right margin and does not perform any line wrapping until it receives a
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each
carriage-return(CR). IfOnisselected, aline-feedcommandissentwitheachcarriage-return. SelectOn
if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select Dark,
the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any
verticalgapsbetweendots. Thisproducesunbrokenverticallines thatcanbereadbyabarcodereader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.
Using the Control Panel 149
AL-MX300 Series User's Guide
FX Menu
Item
Font
Pitch
Settings (default in bold)
Courier, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B
10cpi, 12cpi, 15cpi, Prop.
Off, On
Condensed
T.Margin
Text
0.40 ... 0.50 ... 1.50inch in 0.05-inch increments
1 ... 66 ... 81Lines
CGTable
PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic,
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO
Country
USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,
LatinAmeric
Auto CR
Auto LF
On, Off
Off, On
Bit Image
ZeroChar
Dark, Light, BarCode
0, (or the zero character with a slash)
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T.Margin
Sets the distance from the top of the page to the baseline of the first printable line. The distance is
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Using the Control Panel 150
AL-MX300 Series User's Guide
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the
Orientation, Page Size, or T.Marginsettings, the page length setting automatically returns to the
default for each paper size.
CGTable
Use the character generator (CG) table option to select the graphics character table or the italics table.
The graphics table contains graphic characters for printing lines, corners, shaded areas, international
characters, Greek characters, and mathematical symbols. If you select Italic, the upper half of the
character table is defined as italic characters.
Country
Usethisoptiontoselectoneofthethirteeninternationalsymbolsets. Seethe FontGuideforsamplesof
the characters in each country’s symbol set.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the
printing position goes beyond the right margin. If you select Off, the printer does not print any
characters beyond the right margin and does not perform any line wrapping until it receives a
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each
carriage-return(CR). IfOnisselected, aline-feedcommandissentwitheachcarriage-return. SelectOn
if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select Dark,
the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any
verticalgapsbetweendots. Thisproducesunbrokenverticallines thatcanbereadbyabarcodereader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
Using the Control Panel 151
AL-MX300 Series User's Guide
I239X Menu
The I239X mode emulates IBM 2390/2391 Plus commands.
®
These settings are available only when the printer is in the I239X mode.
Item
Settings (default in bold)
Font
Courier, Prestige, Gothic, Orator, Script, Presentor, Sans serif
Pitch
10cpi, 12cpi, 15cpi, 17cpi, 20cpi, 24cpi, Prop.
Code Page
T.Margin
Text
437, 850, 858, 860, 863, 865
0.30 ... 0.40 ...1.50inch in 0.05-inch increments
1 ... 67 ... 81Lines
Auto CR
Auto LF
Alt. Graphics
Bit Image
ZeroChar
CharacterSet
Off, On
Off, On
Off, On
Dark, Light
0, (or the zero character with a slash)
1, 2
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Code Page
Selects the character tables. Character tables contain the characters and symbols used by different
languages. The printer prints text based on the selected character table.
T.Margin
Using the Control Panel 152
AL-MX300 Series User's Guide
Sets the distance from the top of the page to the baseline of the first printable line. The distance is
measured in inches. The smaller the value, the closer the printable line is to the top.
Text
Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the
Orientation, Page Size, or T.Marginsettings, the page length setting automatically returns to the
default for each paper size.
Auto CR
Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the
printing position goes beyond the right margin. If this setting is off, the printer does not print any
characters beyond the right margin and does not perform any line wrapping until it receives a
carriage-return character. This function is handled automatically by most applications.
Auto LF
If you select Off, the printer does not send an automatic line-feed (LF) command with each
carriage-return(CR). IfOnisselected, aline-feedcommandissentwitheachcarriage-return. SelectOn
if your text lines overlap.
Alt. Graphics
Turns the Alternate Graphics option on or off.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select Dark,
the bit image density is high, and if you select Light, the bit image density is low.
If you select BarCode, the printer converts bit images to bar codes by automatically filling in any
verticalgapsbetweendots. Thisproducesunbrokenverticallines thatcanbereadbyabarcodereader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
CharacterSet
Selects character table 1 or 2.
Using the Control Panel 153
AL-MX300 Series User's Guide
Copy Settings
High Compression
Compresses the original data to increase the number of pages of an original that can be copied for a
single job.
Item
Settings (default in bold)
High Compression
On, Off
Standard Copy Settings
Changes copy activity settings to their standard settings.
Item
Settings
Standard Copy Settings
-
Scan Settings
Network Scan Settings
Enables you to scan from a computer on a network.
Item
Settings (default in bold)
Permit, Not Permit
Network Scan Settings
E-mail Settings
Specifies the maximum size of scanned data for an e-mail attachment.
Using the Control Panel 154
AL-MX300 Series User's Guide
Item
Settings (default in bold)
Max File Size
1MB, 2MB, 5MB, 10MB
Buffer Size
Specifies the maximum size of memory in which to save scanned data temporarily when saving to a
shared folder or computer. Increase the setting value to scan many pages at one time.
Item
Settings (default in bold)
Buffer Size
10MB to 64MB in increments of 1MB
Standard Scan Settings
Changes scan activity settings to their standard settings.
Item
Settings
Standard Scan Settings
-
Fax Settings
Note:
This is available for DNF model only.
Basic Settings
Item
Settings (default in bold)
PSTN, PBX
Line Type
PSTN Number
Personal Settings
0 to 9, *, #, None
Name: up to 20 characters
Number*: up to 20 digits
Speaker Volume
Off, 1, 2, 3
Using the Control Panel 155
AL-MX300 Series User's Guide
Item
Settings (default in bold)
Area Settings
Austria, Belgium, Czech, Denmark, Finland, France, Germany, Greece, Holland,
Hungary, Ireland, Italy, Luxemburg, Norway, Poland, Portugal, Spain, Sweden,
Switzerland, Taiwan, U.K.
*
Press the * asterisk button on the numeric keypad when you want to enter a + mark in this setting. Also, press the # button
on the numeric keypad when you want to enter a space.
Line Type
Specifies the type of your telephone line.
PSTN Number
If you select PBXin Line Type, specify the number that is input to access an outside line.
Personal Settings
Specifies your name and fax number. A maximum of 20 characters can be entered.
Speaker Volume
Specifies the volume of sound when using a telephone line.
Area Settings
Specifies the region in which the fax function is used.
Transmission Settings
Item
Settings (default in bold)
Off, Enter Twice
On, Off
Direct Dialing Limits
Print Sender Info
PC to Fax Function
Enable, Disable
Direct Dialing Limits
Set the number of times to enter a fax number. Select Enter Twiceto avoid mis-sending.
Using the Control Panel 156
AL-MX300 Series User's Guide
Print Sender Info
Prints information about the sender at the top of printouts.
PC to Fax Function
Enables you to use the PC-FAX function.
Reception Settings
Item
Settings (default in bold)
Auto, MP Tray, Cassette1, Cassette2*1
On, Off
Paper Source
Duplex
Receive Mode
Ext. Phone Count
Fit to Page
Auto, Manual
0 to 15*2
On, Off
Fax Output
Print, Folder, E-Mail, Forward
Fax to Folder Settings
Folder Connection Protocol : SMB, FTP
Folder Path: up to 229 characters
Folder User Name: up to 30 characters
Folder Password: up to 20 characters
FTP Server Connection Mode: Passive, Active
FTP Server Connection Port Number: 1 ... 21 ... 65535
Connection Test
E-mail Settings
E-mail Address: up to 255 characters
Max File Size: 200KB, 500KB, 1MB, 2MB, 4MB, 8MB
Subject: up to 64 characters
Connection Test
Forward Number
Up to 20 digits
Memory Reception
Memory Reception: Off, Specify Time, Always
On (Time): xx:xx
Off (Time): xx:xx
*1 Available only when the optional paper cassette unit is installed.
*2 The default setting varies depending on the country where you use the printer.
Using the Control Panel 157
AL-MX300 Series User's Guide
Paper Source
Specifies a paper source to be used. If the output paper size does not match the received data size and
Autois selected for this setting, the data is printed on a different size of paper.
Duplex
Enables you to do duplex printing when you receive a fax.
Receive Mode
When Autois selected, the external telephone rings for a specified time before the printer answers to
receive a fax.
When Manualis selected, the external telephone keeps ringing and the printer does not receive the
fax.
Ext. Phone Count
Specifies the how many times the external telephone connected to the printer rings when Autois
selected in Receive Mode. After the specified ring count, the printer starts receiving the fax.
Fit to Page
When Onis selected, faxes that do not match the size of the paper for printing faxes are reduced to fit
the paper that is available. If Offis selected, any part that does not fit within the page may be erased.
Fax Output
Specifies where to save the received data.
Fax to Folder Settings
Specifiesafolderconnectionprotocol, sharedfolderpath, username, password, FTPserverconnetion
mode, and port number for the destination. Also tests the connection. Up to five folder paths can be
specified.
E-mail Settings
Specifies the e-mail address, the maximum size of e-mail attachments, and the e-mail subject. Also
tests the connection.
Using the Control Panel 158
AL-MX300 Series User's Guide
Forward Number
Specifies the fax number of fax machine to forward to.
Memory Reception
When Specify Timeor Alwaysis selected, received data is stored in the printer’s memory without
being printed. When Specify Timeis selected, you can set when memory reception starts and stops.
Communication Settings
Item
Settings (default in bold)
Fax Log+Output, Fax Log Only, Off
On, Error Only, Off
Fax Log
Fax Send Report
Fax Log
Specifies settings for the communication report. When Fax Log+Outputor Fax Log Onlyis
selected, a report is automatically printed every 50 communications, including both sending and
receiving.
Fax Send Report
Specifies settings for the sent fax report. When Onis selected, a report is printed every time a fax is sent.
WhenError Onlyisselected, theprinterprintsareportonlyifafaxfailstotransmit. Thereportisnot
printed when faxing to multiple addresses.
Detail Settings
Basically do not change the following settings.
Item
Settings (default in bold)
ECM
On, Off
Fax Speed
Fast(33,600bps), Medium(14,400bps), Slow(9,600bps)
Using the Control Panel 159
AL-MX300 Series User's Guide
ECM
Automatically correct an error by checking sending and receiving status from sender and receiver
sides when line troubles occur.
Fax Speed
Set the communication start speed for faxes.
Standard Fax Settings
Changes fax activity settings to their standard settings.
Item
Settings
Standard Fax Settings
-
Address Settings
E-mail Address
Specifies a name and e-mail address for the destination. (Up to 50 destinations)
Item
Settings
E-mail Address
Name
up to 255 characters
up to 20 characters
up to 20 characters
Index
Folder Address
Specifies a shared folder path, name, authentication user name, and password for the destination. (Up
to 20 destinations)
Using the Control Panel 160
AL-MX300 Series User's Guide
Item
Settings (default in bold)
up to 229 characters
up to 20 characters
up to 20 characters
SMB, FTP
Folder Path
Name
Index
Folder Connection Protocol
Authentication User Name
Authentication Password
up to 30 characters
up to 20 characters
Passive, Active
FTP Server Connection Mode*
FTP Server Connection Port Number*
1 ... 21 ... 65535
* Available only when Folder Connection Protocolis set to FTP.
Fax No.
Lets you register, edit, or delete speed-dial and quick-dial numbers. (Up to 500 numbers)
Note:
❏ This is available for DNF model only.
❏ Group-dial allows you to send documents to several people at the same time. You can create a
group-dial list using EpsonNet Config.
Item
Settings
Speed Dial Settings
Number: up to 50 characters
Name: up to 20 characters
Index: up to 20 characters
Quick Dial Settings
Clear All Address
-
-
Admin Settings
You may be prompted to enter a password to open this menu. However, the default setting requires no
password, so you can enter the menu by pressing the OK button.
Using the Control Panel 161
AL-MX300 Series User's Guide
Item
Settings (default in bold)
Password Config Menu
Change Password: up to 20 characters
Limit Range: Disable, Interface, Config, All
Copy, Scan, Print, Fax*
Default Mode
Default
Settings
Init All SelecType
-
-
-
-
Init Copy Settings
Init Fax Settings
Init Scan Settings
*
Available for DNF model only.
Password Config Menu
Specifies an administrator password. When Interfaceis selected in Limit Range, you need to
enter the password to change interface settings. When Configis selected in Limit Range, you need
to enter the password to change the items you configured.
Default Mode
Specifies the mode to enter when the printer is turned on.
If no button is pressed for more than the set time (default is one minute) which is set for Operation
Time Out, the mode returns to the mode set for this setting.
Default Settings
Init All SelecTypechanges the administrator settings to their factory settings.
Init Copy Settingschanges copy settings to their factory settings.
Init Fax Settingschanges fax settings to their factory settings.
Init Scan Settingschanges scan settings to their factory settings.
Support Mode Settings
Enter the SUPPORT MODEby pressing the d Down button while turning the printer on, to make
Support Menuand Printer Adjust Menuappear.
Important:
c Remove interface cables before you enter the SUPPORT MODE.
Using the Control Panel 162
AL-MX300 Series User's Guide
Support Menu
SupportStatusSheet
Prints a sheet showing information about settings of Support Menuand Printer Adjust Menu.
Extend Print Area
Makes the maximum print area larger according to the printed data.
Printer MIBv1 Mode
Uses MIBv1 as a policy rule definition reporting the printer information to SNMP manager.
Printer Adjust Menu
Note:
❏ This menu is a special function. You don’t have to change it for ordinary use.
❏ The settings in this menu may affect the remaining service lives of consumable products or
maintenance parts.
Item
Settings (default in bold)
Plain
0 , 1
0 , 1
0 , 1
0 , 1
0 , 1
0 , 1, 2
Preprinted
Letterhead
Recycled
Color
Special
Using the Control Panel 163
AL-MX300 Series User's Guide
Feed Offset
Scan Offset
Feed Offset2
Scan Offset2
FeedOffsetMP
ScanOffsetMP
FeedOffsetC1
ScanOffsetC1
FeedOffsetC2
ScanOffsetC2
TR Plain1
-3.5 ... 0.0 ... 3.5 mm in 0.5 mm increments
1 ... 6 ... 16
-9 ... 0 ... 9
0, 2, 4, 6
TR Plain2
TR SemiThk
TR Labels
TR Thick
TR ExtraThck
TR Thick3
TR Envelope
Temp Plain1
Temp Plain2
Temp SemiThk
Temp Labels1
Temp Thick
Temp ExtraThck
Temp Thick3
Temp Envelope
Highland
Using the Control Panel 164
AL-MX300 Series User's Guide
BTR Cleaning
Dev Refresh
-
-
Toner Refresh
Noise Level
-
0 ... 3 ... 7
Mono DiagnosisSht
-
Plain, Preprinted, Letterhead, Recycled, Color, Special
Adjusts the print quality according to the paper type. Select 0when a thin paper is printed.
To print using Thick3 paper (stiff, smooth on the surface, and more than 279 mm vertically), select 2
for Specialin this menu, and Special from Paper Type on the printer driver. However, duplex
printing is not available with this settings, and feeding paper takes more time.
Feed Offset
Adjusts the vertical position in which to start printing. The position moves lower on the sheet as the
value increases. This setting is used when doing single-sided printing or printing the first page for
duplex printing.
Scan Offset
Adjusts the horizontal position in which to start printing. The position moves to the right of the sheet
as the value increases. This setting is used when doing single-sided printing or printing the first page
for duplex printing.
Feed Offset2
Adjusts the vertical position in which to star printing. The position moves lower on the sheet as the
value increases. This setting is used when printing the printing on the backside of paper for duplex
printing.
Scan Offset2
Adjusts the horizontal position in which to start printing. The position moves to the right of the sheet
as the value increases. This setting is used when printing on the backside of paper for duplex printing.
FeedOffsetMP, FeedOffsetC1, FeedOffsetC2
Using the Control Panel 165
AL-MX300 Series User's Guide
Adjusts the vertical position in which to start printing. The position moves lower on the sheet as the
value increases. This setting is used when feeding the printed paper from the MP tray, C1, or C2.
ScanOffsetMP, ScanOffsetC1, ScanOffsetC2
Adjusts the vertical position in which to start printing. The position moves to the right of the sheet as
the value increases. This setting is used when feeding the printed paper from the MP tray, C1, or C2.
TR Plain1, TR Plain2, TR SemiThk, TR Labels, TR Thick, TR ExtraThck, TR Thick3, TR
Envelope
Adjusts the density or image granularity for the Plain1, Plain2, Semi-Thick, Label, Thick, ExtraThick,
Thick3, Envelope. The setting becomes darker as the value increases.
TEMP Plain1, TEMP Plain2, TEMP SemiThk, TEMP Labels1, TEMP Thick, TEMP ExtraThck,
TEMP Thick3, TEMP Envelope
AdjuststhefixingtemperatureforthePlain1, Plain2, Semi-Thick, Labels1, Thick, ExtraThick, Thick3,
Envelope. The setting becomes hotter as the value increases. Note that the curl of printouts could
increase as the value increases.
Highland
Adjust this setting if black dots appear on the printed page when using the printer in locations at high
altitudes. See the table below and select a suitable value according to the location the printer is being
used.
Value
Altitude
0 m
0
2
4
6
1000 m
2000 m
3000 m
BTR Cleaning
Cleans the transfer roller. This may eliminate stains that appear on the backside of printed paper
documents. Do not turn off the printer until the LCD panel displays Ready.
Dev Refresh
Using the Control Panel 166
AL-MX300 Series User's Guide
Mixes the developer to spread it evenly. This may prevent seepage when printing low-density images.
Do not turn off the printer until the LCD panel displays Ready.
Toner Refresh
Removes deteriorated toner. If the following problems have occurred while printing low density
documents, this may improve the printouts.
- toner falls inside the printer or onto the paper
- blurring (toner adheres to entire surface of the paper)
Do not turn off the printer until the LCD panel displays Ready.
Noise Level
Adjusts the image gradation. As the value increases, the image gradation gets better, but the image
granularity gets worse.
Mono DiagnosisSht
Prints an all black sheet of paper called a mono-chrome diagnosis. The mono diagnosis sheet allows
you to check for blurring or dirt on the printout.
Status and Error Messages
This section contains a list of error messages shown in the LCD panel. They give a brief description of
each message and suggestions for correcting the problem. Note that not every message shown in the
LCD panel indicates a problem. When the mark is displayed at the left of the warning message,
multiple warnings have occurred.
Note:
Fax related error messages appear only on the DNF model.
ADF Document Jam
A paper jam occurred at the Auto Document Feeder. This error also occurs when the printer is turned
off during a scan job.
ADF Maintenance Unit Needed Soon
This message indicates that the ADF maintenance unit is near the end of its service life. You can
continue to print until the Replace ADF Maintenance Unitmessage appears.
Using the Control Panel 167
AL-MX300 Series User's Guide
Attached File Size Exceeds Limit
Increase the attached file size limit or make the file smaller. If you select Continue, the printer keeps
scanning the image up to the specified size.
Because "ID Card Copy" is set, "Layout" has been canceled
Both Layoutand ID Card Copycannot be set together. If ID Card Copyis set to On, Layoutis set to
Off.
Because "Layout" is set, "ID Card Copy" has been canceled
Both ID Card Copyand Layoutcannot be set together. If Layoutis set to On, ID Card Copyis set to
Off.
Canceling All Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently
receiving or printing. This message appears when the Stop button has been pressed down for more
than three seconds.
Canceling Job
The printer is canceling the current print job. This message appears when the Stop button has been
pressed and released within three seconds, or Cancelis selected in the Print Job Listmenu.
Can’t Print
The print data is deleted because it is incorrect.
Make sure that the appropriate printer driver is being used.
Can’t Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an
appropriate type and size of paper for the duplex printing. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the Start button will print the rest of the
print job on only one side of the paper. Press the Stop button to cancel the print job.
Can’t Print Files
There is no printable data in the USB memory.
Using the Control Panel 168
AL-MX300 Series User's Guide
Cannot Connect to Computer
Noconnectablecomputersarefound. WSDscandevicedriverforthisprintermightnotbeinstalledin
the computer, or the computer’s power might be turned off.
Cannot fax because of report
An error occurs if you perform fax transmission when a power off report cannot be printed after
turning on the printer.
Cannot make settings because fax job is being received
The printer might be receiving fax jobs from a computer. Wait until the fax jobs are finished and then
try again.
Cannot print report
This message appears when you specify printing a report or list that does not exist in the System
Report Printingmenu in the System Informationmenu.
Cannot recognize USB flash memory
The printer cannot recognize the USB memory connected to the printer. Check the connection to the
USB memory or replace it with a new one.
Cassette Error 001/ Cassette2 Error 002
Thewrongcassetteunitis installed. Turnoffthe printer, removethecassetteunit, andthenturnonthe
printer.
Check Paper Size
Thepapersizesettingisdifferentfromthe size of paper loadedintheprinter. Checktoseeifthecorrect
size of paper is loaded in the specified paper source.
To clear this error, select Clear Warningfrom Reset Menuin the Common Settingsmenu. See
Check Media Type
The media loaded in the printer does not match the paper type setting in the printer driver. Media that
matches only the paper size setting will be used for printing.
Using the Control Panel 169
AL-MX300 Series User's Guide
To clear this error, select Clear Warningfrom Reset Menuin the Common Settingsmenu. See
Clear Paper Jam XXXX
The location where the paper jam occurred is displayed at XXXX. XXXXindicates the location of the
error.
If a paper jam occurs at two or more locations simultaneously, the corresponding multiple locations
are displayed.
Close ADF Cover
The ADF cover is not closed securely. Open the cover once, and then close it.
Close Cover wwww
The specified cover (wwww) does not close securely. Open the cover once, then close it.
Also, this warning message may appear when the photoconductor is not installed on the printer.
Collate Disabled
Printing by specifying the number of copies is no longer possible due to a lack of memory (RAM). If
this error occurs, print only one copy at a time.
To clear this error, select Clear Warningfrom Reset Menuin the Common Settingsmenu. See
Correct time using Time Setting
The current time setting is reset because you did not connect the power cord for a long time. To clear
this warning message, select Time Settingfrom Setup Menuand specify the current date and time.
Communication Error
Scanning is canceled when the computer is turned off after you select a computer in which to save data
for WSD scan, or the connection was stopped because the LAN cable was unplugged.
Connecting to E-mail Server
Using the Control Panel 170
AL-MX300 Series User's Guide
The connection test is carried out. The printer is testing a communication to the e-mail server.
Document Error
The paper which is set is not correct. Please check the paper and set it again. For details on how to set
your original, see “Setting Your Originals” on page 50.
Duplex Memory Overflow
There is not enough memory for duplex printing. The printer prints only on the front and ejects the
paper. To clear this error, follow the instructions below.
If Offis selected as the Auto Contsetting on the control panel’s Setup Menu, press the Start button
to print on the back of the next sheet, or cancel the print job. To cancel the print job, see “Canceling a
If Onis selected, printing continues automatically after a certain period of time.
E-mail Transmission Error
E-mail transmission failed. Check the E-mail Server Settingsand perform the Connection
server.
Fax Board Memory Full
Wait until the fax jobs stored in the memory are finished, and then try transmission/reception again.
Faxing cannot begin
Unable to perform fax transmissions or receptions due to insufficient memory in the printer. Wait
until the fax jobs stored in the memory are finished, and then try transmission/reception again.
Fax Communication Error
A fax communication error occurred during transmission due to some cause.
Fax Error/ Fax Error Unable to Fax
Anerroroccurredinthefaxunit. Turn offtheprinter, waitseveralminutesandthenturn itonagain. If
the error occurs again, contact your dealer or a qualified customer support person for assistance.
Fax Image Data Error xx
Using the Control Panel 171
AL-MX300 Series User's Guide
Fax was not received normally. If the error occurs again, contact your dealer or a qualified customer
support person for assistance.
Fax report cannot begin to print
The printer might be receiving a fax. Try again after the fax receiving is completed.
Faxing cannot begin
Send the fax again after fax reception or the PC to FAX operation is completed.
Feed Roller C1 Needed Soon/ Feed Roller C2 Needed Soon
This message indicates that the feed roller C1 or C2 is near the end of its service life. You can continue
to print until the Replace Feed Roller C1or Replace Feed Roller C2message appears.
To clear this warning message and continue printing, select Clear All Warningsfrom Reset
Menuin the Common Settingsmenu. For instruction about accessing the control panel menus, see
File Name Already Exists
You cannotsave the file because the same file namealready exists in the USB memory or shared folder.
Rename or delete the file in the USB memory or shared folder.
File Size Exceeds Limit
Transmission failed because the size of the data being sent exceeded the limit specified on the printer.
Change the Max File Sizesetting in E-mail Settingsor make the file smaller.
Filling toner xx min
The printer is filling toner. Wait until this message disappears. Do not turn off the printer while
filling.
Folder Memory Full
There is insufficient memory in the specified folder on the network to carry out the current task. Press
the Stop button to cancel the job.
Folder Write Error
Saving data to the specified shared folder on the network failed.
Using the Control Panel 172
AL-MX300 Series User's Guide
Fuser Needed Soon
This message indicates that the fuser unit is near the end of its service life. You can continue to print
until the Replace Fusermessage appears.
To clear this warning message and continue printing, select Clear All Warningsfrom Reset
Menuin the Common Settingsmenu. For instruction about accessing the control panel menus, see
Hang Up Receiver
The fax operation is completed. Hang up the hand set of the external telephone connected to the
printer.
"ID Card Copy" is set. Cancel "ID Card Copy".
When ID Card Copyis set to On, you cannot change the Zoomsetting. Set ID Card Copyto Off.
Image Optimum
There is insufficient memory to print the page at the specified print quality. The printer automatically
lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable,
try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.
To clear this error, select Clear Warningfrom the Reset Menuin the Common Settingsmenu. See
Install Fuser
The fuser unit is not installed in the printer. Install the fuser unit. For details, see the documentation
supplied with the fuser unit.
Caution:
!
If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must
touch one of theseareas, turnoffthe printer and wait 40 minutes to allow theheat to subside before
doing so.
Install Photoconductor
The photoconductor unit is not installed in the printer. Install the photoconductor unit. For details,
see the documentation supplied with the photoconductor unit.
Install Toner Cartridge
Using the Control Panel 173
AL-MX300 Series User's Guide
The toner cartridge is not installed in the printer.
Install the indicated cartridges. See “Toner cartridge/Return toner cartridge” on page 276.
Invalid Data
The spool file on the driver is deleted while printing or the data is abnormal. Select Closeto clear the
error.
Invalid PS3
There are errors in the ROM module. Turn off the printer and contact your dealer.
"Layout" is set.
You started copying with the layout function. Set the Layoutsetting under the AdvnSetting1tab to
None.
Load Document in ADF
No document in the Auto Document Feeder. Please put a document in the ADF. For details on how to
set your original, see “Setting Your Originals” on page 50.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make sure the paper size indicated by
ssssis loaded, then press the Start button.
Memory Overflow
The printer has insufficient memory to execute the current task. Select Closeto resume printing or
cancel the print job. To cancel the print job, see “Canceling a Print Job” on page 72.
No trays available Cancel the job
All of the MP Tray AutoSel, Cassette1 AutoSel, amd Cassette2 AutoSelsettings in Tray
Menuare set to Off, so the printer cannot feed paper. Press the Status button to cancel the print job.
To cancel the print job, see “Canceling a Print Job” on page 72. To continue printing, specify the paper
source on the printer driver, or set the above settings in Tray Menuto On.
Not Input Please Enter
Nothing is entered for the setting. Enter a value for the setting.
Using the Control Panel 174
AL-MX300 Series User's Guide
Paper for Printing Faxes Not Loaded
Replace the loaded paper with paper that the fax can be printed on. For details, see “Output paper size”
Paper Out tttt sssss
There is no paper in the specified paper source (tttt). Load paper of the size (sssss) into the paper
source.
Paper Set tttt pppp
The paper loaded in the specified paper source (tttt) does not match the required paper type (pppp).
Replace the loaded paper with the correct paper type and press the Start button to resume printing, or
cancel the print job. To cancel the print job, see “Canceling a Print Job” on page 72.
If you press the Start button without replacing the paper, the printer will print on the loaded paper
even though it does not match the required paper type.
Paper Set tttt sssss
Thepaperloadedinthespecifiedpapersource(tttt)doesnotmatchtherequiredpapersize(sssss).
Replace the loaded paper with the correct size paper and press the Start button to resume printing, or
cancel the print job. To cancel the print job, see “Canceling a Print Job” on page 72.
If you press the Start button without replacing the paper, the printer will print on the loaded paper
even though it does not match the required size.
Paper Set tttt ssss1 or ssss2
This message appears in the following situations:
- A4/LT Auto Switchingin the Setup Menuis set to On
- when printing a job specified as A4 with the printer driver, there is no paper source that is set as A4or
as LT(alternate size for A4) in the Tray Menu
- when printing a job specified as letter size with the printer driver, thereisnopapersourcethatissetas
LTor as A4(alternate size for LT) in the Tray Menu
To clear this warning message, make sure that A4or as LTis set to the specified paper source (tttt) in
the Tray Menu, load A4 or Letter size paper (ssss1or ssss2) in the specified paper source (tttt)
and press the Start button, or cancel the print job. To cancel the print job see “Canceling a Print Job”
Photoconductor Needed Soon
Using the Control Panel 175
AL-MX300 Series User's Guide
This message indicates that the photoconductor unit is near the end of its service life. You can
continue to print until the Replace Photoconductormessage appears. To clear this warning
message and continue printing, select Clear All Warningsfrom Reset Menuin the Common
Photoconductor Trouble
There is a problem with the photoconductor unit. Remove the photoconductor unit and reinsert it. If
that fails to clear the error, replace the photoconductor unit with a new one. For details about
replacement, see the instructions that come with the photoconductor unit.
Please choose the e-mail address.
An e-mail address is not specified. Press the F1 button to select E-mail, press the F1 button again to
select Address, and then specify a destination.
Please choose the folder.
A destination folder is not specified. Press the F1 button to select Save toand specify a destination.
Specify the address
The printer is ready to send a fax. Enter a recipient fax number using the numeric keypad or specify an
address from the speed-dial list.
Print Overrun
Therequiredtimetoprocesstheprintdataexceededtheprintenginespeedbecausethecurrentpageis
too complex. Select Closeto resume printing or cancel the print job. To cancel the print job, see
setting in the control panel’s Setup Menu.
If you continue to receive this message when printing a particular page, try simplifying the page by
limiting the number of graphics or reducing the number and size of fonts.
Printer Error Unable to Copy/ Printer Error Unable to Print
An error occurred on the printer. Turn off the printer, wait several minutes and then turn it on again.
RAM CHECK
The printer is checking the RAM.
Using the Control Panel 176
AL-MX300 Series User's Guide
Ready
The printer is ready to receive data and print.
Ready to Copy
The printer is ready to copy.
Reboot to apply settings
You selected Nowhen Do you want to reboot to apply the settings?was displayed. To
clear this error, select Clear Warningfrom Reset Menuin the Common Settingsmenu. See
Replace ADF Maintenance Unit
The ADF maintenance unit has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Replace Feed Roller C1/ Replace Feed Roller C2
The feed roller C1, C2 has reached the end of its service life and needs to be replaced. If this error
occurs, consult your dealer.
Replace Fuser
Thefuserhasreachedtheendofitsservicelifeandneeds tobereplaced. Fordetailsaboutreplacement,
see the instructions that come with the fuser unit.
Caution:
!
If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must
touch one of theseareas, turnoffthe printer and wait 40 minutes to allow theheat to subside before
doing so.
Replace Photoconductor
The photoconductor unit has reached the end of its service life and needs to be replaced. For details
about replacement, see the instructions that come with the photoconductor unit.
Replace Toner Cartridge
The toner cartridge has reached the end of its service life and need to be replaced. For details about
replacement, see the instructions that come with the toner cartridge.
Using the Control Panel 177
AL-MX300 Series User's Guide
Reserve Job Canceled
The printer cannot store the data of your print job using the Reserve Job function. The maximum
number of print jobs stored on the printer’s memory has been reached, or the memory has no more
memory available to store a new job. To store a new print job, delete a previously stored job. Also, if
you have any Confidential Jobs stored, printing those jobs will make more memory available.
You may also increase the available memory space by changing the RAM Disksetting to Normalor
To clear this error, select Clear Warningfrom Reset Menuin the Common Settingsmenu. See
Reset All
All Printer Settings have been reset to the default configuration, or to the last settings that were saved.
ROM CHECK
The printer is checking the ROM.
Scanner Error Cannot Be Executed
An error occurred in the scanner unit. Turn off the printer, and then turn it on again several minutes
later. If the error occurs again, contact your dealer or a qualified customer support person for
assistance.
Scanner Error Unable to Scan/ Scanner Error Unable to Copy
An error occurred in the scanner unit. Turn off the printer, wait several minutes and then turn it on
again.
Searching Files
The printer is searching files in the USB memory.
Select A4, A5, LT or LGL Paper Size for ID Card copying
Use the paper source for which A4, A5, LT, or LGL has been set for the Papersize to do Layoutor ID
Cardcopying.
Select Other Paper Size
Using the Control Panel 178
AL-MX300 Series User's Guide
The loaded paper and the paper size specified on the control panel do not match. Check the loaded
paper size and the setting on the control panel.
SELF TEST
The printer is currently performing a self test and initialization.
Service Req Cffff/ Service Req Eggg/ Service Req *ffff
A controller error or a print engine error has been detected. Turn off the printer. Wait at least 5
seconds, then turn it back on. If the error message still appears, write down the error number listed in
the LCD panel (Cffff/Eggg/*ffff), turn off the printer, unplug the power cord, then contact a
qualified service representative.
Shake and reinstall Photoconductor
The photoconductor unit may not be installed correctly. Remove the photoconductor unit, shake it,
and then reinsert it. If the error status still remains, turn the printer off and then on again. If this error
persists, consult your dealer.
Shake and reinstall Toner Cartridge
The toner in the toner cartridge may be uneven. Follow the steps below to spread the toner evenly.
1. Open cover A.
2. Turn the lock lever to the release position.
Using the Control Panel 179
AL-MX300 Series User's Guide
3. Remove the toner cartridge.
4. Rock the toner cartridge back and forth a few times.
5. Reinsert the toner cartridge, and turn the lock lever to the lock position.
6. Close cover A.
If this error persists, consult a qualified service representative.
Sleep (while the Power Saving button is lighting)
The printer is currently in power-save mode. This mode is canceled when the printer receives job
data.
Specified folder could not be opened
Saving data to the specified shared folder on the network failed because the specified folder could not
be opened. Check if the folder path, user name, or password specified in Folder Addressof the
Address Settingsis correct.
Specified save dest cannot be used
Saving data to the specified shared folder on the network failed. Unsupported characters are used to
specify the destination.
Testing e-mail transmission
The connection test is carried out. The printer is testing to e-mail to the specified address.
The specified user name cannot be used
Using the Control Panel 180
AL-MX300 Series User's Guide
Saving data to the specified shared folder on the network failed. Unsupported characters are used to
specify the user name.
There is no A4, A5, LT or LGL sized paper
YouselectedapapersourcethatdoesnothaveA4, A5, LT, orLGLsizepaperforlayoutcopying. Check
to see if the correct size of paper is loaded in the specified paper source.
Toner Cartridge Error
There is a problem with the toner cartridge. Remove the toner cartridge and reinsert it. If that fails to
clear the error, replace the toner cartridge with a new one. For details about replacement, see the
instructions that come with the toner cartridge.
Toner Low
This message indicates that the toner cartridge is near the end of its service life. Prepare a new toner
cartridge.
Unable Clear Error
The printer cannot clear an error message because the error status still remains. Try solving the
problem again.
Unable to scan because PC-FAX is saving files
The PC-FAX operation might be performed. Finish the PC-FAX operation, and then try to send the
fax again.
Unable to Transmit Fax
Unable to perform fax transmissions. This message appears when you send a fax manually. When
sending a fax using the memory transmission function, the message does not appear.
Unable to Transmit Fax
A fax communication error occurred during transmission. Wait for a few minutes and try again. Also
make sure that the fax number is correct.
Unsupported USB Device xxx
Unsupported USB device is connected.
Using the Control Panel 181
AL-MX300 Series User's Guide
USB Memory Error
The USB memory may be corrupted or incorrect. Replace it with a new one.
USB Memory Full
There is no space available on the USB memory connected to the printer. Delete data from the USB
memory to create free space, or use a different USB memory.
USB Memory Not Connected
A USB memory is not connected to the printer. Connect a USB memory to the USB Host interface.
USB Memory Write Error
Saving data to the USB memory failed.
USB Memory Write Protect
Unable to save the data to the USB memory. Check that the USB memory connected to the printer is
not read-only.
Using Phone
The external telephone connected to the printer is being used.
Wait for a while and try again
You started printing from a USB memory while multiple jobs are stored in the printer. Wait for a few
minutes, and then try again.
Warming Up
The printer is warming up so that printing, copying, faxing, or scanning can be done.
Write Error ROM P
The printer is unable to write data to the ROM module correctly. You cannot remove the ROM P
because the ROM P is a program ROM module. Contact your dealer.
Writing and saving files to folder
Using the Control Panel 182
AL-MX300 Series User's Guide
The connection test is carried out. The printer is testing to write and save data to the specified shared
folder on the network.
Writing ROM P
This message indicates that a ROM module in the slot is being written. Please wait until this message
disappears.
Wrong Photoconductor
An inappropriate photoconductor unit is installed. Install only the photoconductor unit listed in
Wrong Toner Cartridge
An inappropriate toner cartridge is installed. Install only the toner cartridge listed in “Consumable
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s memory using the Re-Print Job, Verify Job, and Confidential Job
options of the Reserve Job function can be printed and deleted using the control panel. Follow the
instructions in this section.
Note:
The RAM Disksetting on the control panel must be set to Normalor Maximumto use the Reserve Job
function.
Printing and Deleting Re-Print Jobs or Verify Jobs
Follow the steps below to print or delete Re-Print Job and Verify Job data.
1. Press the Print button.
Using the Control Panel 183
AL-MX300 Series User's Guide
2. Press the F3 button.
3. Press the u or d button several times to select the appropriate user name, and then press the OK
button.
4. Press the u or d button several times to select the appropriate print job, and then press the OK
button.
To delete the print job without printing any copies, press the F3 button, and then press the F3
button again.
5. Specify the number of copies using the numeric keypad on the control panel.
6. Press the Start button.
The printer starts printing.
Printing and Deleting Confidential Jobs
Follow the steps below to print or delete Confidential Job data.
1. Press the Print button.
2. Press the F2 button.
Using the Control Panel 184
AL-MX300 Series User's Guide
3. Press the u or d button several times to select the appropriate user name, and then press the OK
button.
4. Enter your four-digit password using the numeric keypad on the control panel, and then press the
OK button.
5. Press the u or d button several times to select the appropriate print job, and then press the OK
button. You can select multiple files at the same time.
To delete the print job without printing any copies, press the F4 button, and then press the F3
button again.
6. Specify the number of copies using the numeric keypad on the control panel.
7. Press the Start button.
The printer starts printing.
Printing a Configuration Status Sheet
1. Press the Setting button.
2. Press the u or d buttons to select System Information, and then press the OK button.
3. Press the u or d buttons to select System Report Printing, and then press the OK button.
4. PresstheuordbuttonstoselectPrint Configuration Status Sheet, andthenpresstheOK
button.
Note:
❏ If the configuration status sheet does not list your installed options correctly, make sure that they are
securely connected to the printer.
❏ If you are unable to get the printer to print a correct configuration status sheet, contact your dealer.
❏ Print the configuration status sheet on A4 size paper.
Using the Control Panel 185
AL-MX300 Series User's Guide
Chapter 8
Installing Options
Optional Paper Cassette Unit
For details about the paper types and sizes that you can use with the optional paper cassette unit, see
Handling precautions
Always pay attention to the following handling precautions before installing the option:
The printer weights approximately 18.8 kg (41.4 lb) for the DN model or 19.0 kg (41.9 lb) for the DNF
model with consumable products installed. One person should never attempt to lift or carry it alone.
Two people should carry the printer, lifting it from the position shown below.
Caution:
!
To lift the printer safely, you must hold it in the positions shown above. If carried incorrectly, the
printer may be dropped and damaged or cause an injury.
Installing Options 186
AL-MX300 Series User's Guide
Installing the optional paper cassette unit
1. Turn the printer off and unplug the power cord and interface cable.
* DNF model only
Important:
c Make sure to unplug the power cord from the printer to prevent getting an electrical shock.
2. Carefully take the optional paper cassette unit out from its carton and place it where you intend to
set up the printer.
3. Confirm the bundled items.
a. optional paper cassette unit
b. screws
Installing Options 187
AL-MX300 Series User's Guide
4. Pull out the MP tray.
5. Pull out the standard lower paper cassette.
Installing Options 188
AL-MX300 Series User's Guide
Note:
Remove the protective materials from the optional paper cassette before proceeding to step 6.
* protective material
6. Lift the printer with two people.
Installing Options 189
AL-MX300 Series User's Guide
7. Place the printer onto the optional paper cassette unit. Align each of the printer’s corners with
those of the optional paper cassette unit. Then lower the printer until it rests securely on the
optional paper cassette unit.
8. Secure the printer to the optional paper cassette unit with the two screws.
Installing Options 190
AL-MX300 Series User's Guide
9. Insert the standard lower paper cassette.
10. Insert the MP tray into the printer.
Installing Options 191
AL-MX300 Series User's Guide
11. Close the MP tray.
12. Reconnect the interface cable and power cord, and then turn the printer on.
To confirm that the option is installed correctly, print a configuration status sheet. See “Printing a
Removing the optional paper cassette unit
Perform the installation procedure in reverse.
Installing Options 192
AL-MX300 Series User's Guide
Chapter 9
Replacing Consumable Products/Maintenance Parts
Precautions During Replacement
Always observe the following handling precautions when replacing consumable products or
maintenance parts.
For details about the replacements, see the instructions that come with the consumable products.
Caution:
!
❏ Be careful not to touch the fuser, which is marked with a caution label, or the surrounding
areas. If the printer has been in use, the fuser and surrounding areas may be very hot.
❏ Do not dispose of used consumable products or maintenance parts in fire, as they may explode
and cause injury. Dispose of them according to local regulations.
❏ Provide enough space for the replacement procedure. You will have to open some parts (such as
the printer cover) of the printer when you are replacing consumables or maintenance parts.
❏ Do not install used consumable products or maintenance parts that reach end of service life into
the printer.
For details about the handling precautions, see “Handling the consumable products and maintenance
Replacement Messages
If a consumable product or maintenance part reaches the end of its service life, the printer displays the
following message on the LCD panel or the window of EPSON Status Monitor.
LCD Panel Message
Replace Toner Cartridge
Replace Photoconductor
Replace Fuser
Description
The toner cartridge has reached the end of its service life.
The photoconductor unit has reached the end of its service life.
The fuser has reached the end of its service life.
Replacing Consumable Products/Maintenance Parts 193
AL-MX300 Series User's Guide
Note:
Messages appear for one consumable product or maintenance part at a time. After replacing a
consumable product or maintenance part, check the LCD panel for replacement messages for other
consumable products or maintenance parts.
Replacing Consumable Products/Maintenance Parts 194
AL-MX300 Series User's Guide
Chapter 10
Cleaning and Transporting the Printer
Cleaning the Printer
The printer needs only minimal cleaning. If the printer’s outer case is dirty or dusty, turn off the
printer and clean it with a soft, clean cloth moistened with a mild detergent.
Important:
c Never use alcohol or paint thinner to clean the printer cover. These chemicals can damage the
components and the case. Be careful not to get water onto the printer mechanism or any electrical
components.
Cleaning and Transporting the Printer 195
AL-MX300 Series User's Guide
3. Pull out the standard lower paper cassette.
4. Gently wipe the pickup roller with a well-wrung wet cloth.
Inside the printer
Wipe the four pickup rollers.
* pickup roller
Cleaning and Transporting the Printer 197
AL-MX300 Series User's Guide
MP Tray
* pickup roller
Lower paper cassette
* pickup roller
Cleaning and Transporting the Printer 198
AL-MX300 Series User's Guide
5. Insert the lower paper cassette unit.
6. Insert the MP tray into the printer.
Cleaning and Transporting the Printer 199
AL-MX300 Series User's Guide
Cleaning the document table and the exposure window for Auto Document
Feeder
If a line of dots always appears in your scanned images, fax images, or copies, the document table or
exposure window for Auto Document Feeder may be dusty or scratched. Clean those parts.
a. white plate
b. document cover
c. exposure window for ADF
d. document table
Cleaning and Transporting the Printer 201
AL-MX300 Series User's Guide
Cleaning the ADF pickup roller
When the Auto Document Feeder has failed to feed paper, open the ADF cover, and wipe away the
roller with a wet, well-wrung cloth and remove paper dust.
Transporting the Printer
For long distances
Before you move the printer, prepare the location where you are going to place it.
See the following sections.
Repacking the printer
If you need to transport your printer for long distances, carefully repack it using the original box and
packing materials.
1. Turn off the printer and remove the following items:
❏ Power cord
❏ Interface cables
Cleaning and Transporting the Printer 202
AL-MX300 Series User's Guide
❏ Loaded paper
❏ Installed options
2. Attach the protective materials onto the printer, then repack the printer in its original box.
Important:
c When moving the printer, always keep it horizontal.
For short distances
Before you move the printer, prepare the location where you are going to place it.
See the following sections.
If you are moving the printer on its own, two people should lift and carry the printer.
1. Turn off the printer and remove the following items:
❏ Power cord
❏ Interface cables
❏ Loaded Paper
❏ Installed options
2. Be sure to lift the printer by the correct positions as shown below.
Cleaning and Transporting the Printer 203
AL-MX300 Series User's Guide
Important:
c When moving the printer, always keep it horizontal.
Cleaning and Transporting the Printer 204
AL-MX300 Series User's Guide
Chapter 11
Troubleshooting
Clearing Jammed Paper
If paper becomes jammed in the printer, the printer’s LCD panel and EPSON Status Monitor provide
alert messages.
Error Message
Refer to
Clear Paper Jam
B
For instructions on clearing this type of paper jam, see “Paper Jam B (Cover B)”
Clear Paper Jam
MP C1 B
For instructions on clearing this type of paper jam, see “Paper Jam MP, C1, C2,
Clear Paper Jam
MP C1 C2 B
Precautions for clearing jammed paper
Be sure to observe the following points when you clear jammed paper.
❏ Do not remove jammed paper by force. Torn paper can be difficult to remove and might cause
other paper jams. Pull the paper gently and steadily to avoid tearing it, falling down, and injuring
yourself.
❏ Always try to remove jammed paper with both hands to avoid tearing it.
❏ If jammed paper is torn and remains in the printer, or if paper is jammed in a place not mentioned
in this section, contact your dealer.
❏ Make sure that the paper type that is loaded is the same as the Paper Type setting in the printer
driver.
Troubleshooting 205
AL-MX300 Series User's Guide
Caution:
!
❏ Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked
with a caution label, or the surrounding areas. If the printer has been in use, the fuser and the
surrounding areas may be very hot. If you must touch one of these areas, wait 40 minutes to
allow the heat to subside before doing so.
❏ Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
Paper Jam B (Cover B)
1. Open cover B.
2. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
Troubleshooting 206
AL-MX300 Series User's Guide
Caution:
!
Be careful not to touch the rollers in the fuser unit, they may be very hot.
Important:
c
❏ Donotexposethephotoconductorunittosunlightatallandavoidexposingittoroomlight
for more than three minutes.
❏ Do not touch the transfer roller on the transfer unit to avoid damaging it.
3. Unlock the release levers on the rear of the fuser unit.
4. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
Troubleshooting 207
AL-MX300 Series User's Guide
1. Open the MP tray and remove it.
2. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
Troubleshooting 209
AL-MX300 Series User's Guide
3. Pull out the standard lower paper cassette.
Note:
When C2is displayed on the LCD panel, pull out the optional paper cassette as well.
Troubleshooting 210
AL-MX300 Series User's Guide
4. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
5. Open cover B.
Troubleshooting 211
AL-MX300 Series User's Guide
6. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
Caution:
!
Be careful not to touch the rollers in the fuser unit, they may be very hot.
Important:
c
❏ Donotexposethephotoconductorunittosunlightatallandavoidexposingittoroomlight
for more than three minutes.
❏ Do not touch the transfer roller on the transfer unit to avoid damaging it.
7. Unlock the release levers on the rear of the fuser unit.
Troubleshooting 212
AL-MX300 Series User's Guide
8. If there is any jammed paper, remove it gently with both hands. Be careful not to tear the jammed
paper.
9. Lock the release levers.
Troubleshooting 213
AL-MX300 Series User's Guide
10. Insert the lower paper cassette.
Note:
If using the optional paper cassette unit, make sure to insert it.
Troubleshooting 214
AL-MX300 Series User's Guide
11. Insert the MP tray into the printer.
12. Close the MP Tray.
Troubleshooting 215
AL-MX300 Series User's Guide
2. Turn the lever to the left to unlock the ADF pickup module.
3. Remove the ADF pickup module, and then remove jammed paper.
Troubleshooting 217
AL-MX300 Series User's Guide
4. Attach the ADF pickup module.
5. Turn the lever to the right to lock the ADF pickup module.
6. If the document is under the tray, pull any sheets of paper out in the direction that paper is fed.
Troubleshooting 218
AL-MX300 Series User's Guide
7. Remove all the documents from the ADF, then close the ADF cover.
Note:
If you cannot pull out the jammed paper, proceed to the next step.
8. Open the document cover.
Troubleshooting 219
AL-MX300 Series User's Guide
9. Gently pull any sheets of paper out.
10. Close the document cover.
Printing a Configuration Status Sheet
To confirm the current status of the printer, and that the options are installed correctly, print a
configuration status sheet using the printer’s control panel or the printer driver.
Troubleshooting 220
AL-MX300 Series User's Guide
To print a configuration status sheet from the printer’s control panel, see “Printing a Configuration
To print a configuration status sheet from the printer driver, for Windows, see “Printing a
Operational Problems
The Print LED does not turn on
Cause
What to do
The power cord may not be properly plugged into the
electrical outlet.
Turn off the printer, check the power cord connections between
the printer and the electrical outlet, then turn the printer back on.
The electrical outlet may be controlled by an outside
switch or an automatic timer.
Make sure that the switch is turned on or plug another electrical
device into the outlet to check whether the outlet is operating
properly.
The printer is in the sleep mode (the Power Saving
button lights).
Press the Power Saving button to return the printer to ready
status.
The printer is in the power off mode. (For DN models sold
in the EU only)
Turn on the power switch.
To not enter the power off mode, set Power Off Timerto Offin
Energy Saver Menuon the control panel.
The printer does not print (Print LED off)
Cause
What to do
The printer is offline.
Press the Start button once to switch the printer to ready status.
Make sure that the Print LED turns on.
Some error may have occurred.
Check the LCD panel to see if an error message appears.
Turn on the power switch.
The printer is in the power off mode. (For DN models sold
in the EU only)
To not enter the power off mode, set Power Off Timerto Offin
Energy Saver Menuon the control panel.
Troubleshooting 221
AL-MX300 Series User's Guide
The Print LED is on but nothing prints
Cause
What to do
Perform the procedure illustrated in the Setup Guide.
Your computer may not be properly connected to the
printer.
The interface cable may not be plugged in securely.
Check both ends of the interface cable between the printer and
the computer.
You may not be using the correct interface cable.
If you are using the USB interface, use a cable that is compatible
with Hi-Speed USB.
Your application software is not properly set up for your Make sure that the printer is selected in your application software.
printer.
Your computer system’s memory is too small to handle
the volume of data in your document.
Try reducing the image resolution of your document in the
application software, or install more memory in your computer if
you can.
The optional product is not available
Cause
What to do
The printer does not recognize the optional product.
Print a configuration status sheet to see if the printer recognizes
the optional product. If not, reinstall the optional product.
Thesettingforrecognizingoptions maybe set manually. See “Making Optional Settings” on page 251 to set the printer
driver to automatically update information about options.
The remaining service life of the consumable products is not updated
(Windows only)
Cause
What to do
The interval between updating information for the
consumable products is too long.
Press the Get Information Now button on the Consumables Info
Settings dialog box. You can also change the interval for updating
informationabouttheconsumableproductsontheConsumables
Info Settings dialog box.
Troubleshooting 222
AL-MX300 Series User's Guide
Cannot install software or drivers
Cause
What to do
You are not accessing the operating system with the
administrator privilege.
Access the operating system with the administrator privilege.
Cannot access the shared printer
Cause
What to do
Inappropriate texts are used for the Share name of the
shared printer.
Do not use spaces or hyphens for the Share name.
An additional driver cannot be installed on the client
computer, although the print server’s OS and the client
OS are different.
Install the printer drivers from the Software Disc.
If your computer does not have a CD/DVD drive, download the
driver from the Epson website, and then install it.
http://www.epson.eu/Support (Europe)
http://support.epson.net/ (outside Europe)
Your network system causes this problem.
Ask the administrator of the network for assistance.
Note:
For the additional driver to be installed, please see the table below.
Server OS
Client OS
Additional Driver
Intel Windows 2000 or XP
x64 Windows XP
Windows XP*
Windows XP clients
Windows XP x64 clients
Windows XP clients
Windows XP x64, Server 2003, or
Server 2003 x64*
Windows XP and Windows Server
2003
Windows XP x64 clients
x64WindowsXPandWindowsServer
2003
Windows 8, 8 x64, 7, Vista, Vista x64,
Server 2012 x64, Server 2008, Server
2008 x64, or Server 2008 R2
Windows 8, 7, Vista, or XP clients
x86 Type 3 - User Mode
x64 Type 3 - User Mode
Windows 8 x64, 7 x64, Vista x64, or XP
x64 clients
*
The additional driver for Windows XP x64 and Server 2003 x64 can be used on Windows XP Service Pack 2, Windows 2003
Service Pack 1, or later.
Troubleshooting 223
AL-MX300 Series User's Guide
Printout Problems
The font cannot be printed
Cause
What to do
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box. (Only when ESC/
Page mode is being used)
The selected font is not supported by your printer.
Make sure that you have installed the correct font. See the Font
Guide for more information.
Printout is garbled
Cause
What to do
The interface cable may not be plugged in securely.
Make sure that both ends of the interface cable are plugged in
securely.
You may not be using the correct interface cable.
If you are using the USB interface, use a cable that is compatible
with Hi-Speed USB.
The emulation setting for the port may not be correct.
Specify the emulation mode by using the printer’s control panel
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified
service representative.
The printout position is not correct
Cause
What to do
The page length and margins may be set incorrectly in
your application.
Make sure that you are using the correct page length and margin
settings in your application.
The paper size setting may be incorrect.
Make sure the correct paper size is set in the Tray Menuon the
control panel.
The MP Tray Sizesetting may be incorrect.
When loading paper for which the size is not specified with Auto
setting, specify the correct paper size on the MP Tray Size
setting in the Tray Menuon the control panel.
Troubleshooting 224
AL-MX300 Series User's Guide
Cause
What to do
The offset values may be changed in the Printer
Confirm andadjusttheoffsetvaluessuchasFeed Offsetor Scan
Adjust Menu.
Graphics do not print correctly
Cause
What to do
The printer emulation setting in your application may be
incorrect.
Make sure that your application is set for the printer emulation
you are using. For example, if you are using the ESC/Page mode,
make sure that your application is set to use an ESC/Page printer.
Printouts are extremely curled
Cause
What to do
Your paper may be moist or damp.
Do not store your paper in a humid or damp environment.
Turn the paper over or load a different type of paper
The printouts are curled because of heat and pressure of
the fuser unit.
The paper type setting may not be appropriate for the
loaded paper.
Set the appropriate paper type in the printer driver.
Set the value for the used paper type in the Printer Adjust
The fixing temperature may not be appropriate.
Try to lower the temperature by the Tempsettings in the Printer
Adjust Menu. However, do this at your risk, as lowering the
temperature too far may prevent normal fixing. See“Printer
Troubleshooting 225
AL-MX300 Series User's Guide
Print Quality Problems
The background is dark or dirty
Cause
What to do
You may not be using the correct type of paper for your If the surface of your paper is too rough, printed characters may
printer.
appear distorted or broken. Smooth, high-quality copier paper is
recommended for best results. See “Available paper types” on
page 267 for information on choosing paper.
The paper path inside the printer may be dusty.
The Density setting may be too dark.
Clean internal printer components by printing three pages with
only one character per page.
In the printer driver, click Extended Settings on the Optional
Settings tab, and then lighten the Density setting.
If the Densitysetting in the Printing Menuis set to 5, change it
back to 3.
There may be a temporary problem with the toner or
developer.
Try to perform Dev Refreshor Toner Refreshin the Printer
Adjust Menu. Note that Toner Refreshconsumes the toner.
Dots appear in the printout
Cause
What to do
The paper path inside the printer may be dusty.
Clean internal printer components by printing three pages with
only one character per page.
Your paper may be moist or damp.
Do not store paper in a humid or damp environment. Be sure to
use paper that is newly unwrapped.
The paper type setting may not be appropriate for the
loaded paper.
Set the appropriate paper type in the printer driver.
The printer may be being used in a location at a high
altitudes.
Adjust the Highlandsetting in the Printer Adjust Menu. See
There may be a temporary problem with the toner or
developer.
Try to perform Dev Refreshor Toner Refreshin the Printer
Adjust Menu. Note that Toner Refreshconsumes the toner.
Troubleshooting 226
AL-MX300 Series User's Guide
Cause
What to do
The transfer roller may be dusty.
Perform BTR Cleaningin the Printer Adjust Menu. See
The photoconductor unit may be near the end of its
service life.
Replace the photoconductor unit. See “Replacing Consumable
Print quality or tone is uneven
Cause
What to do
Your paper may be moist or damp.
Do not store paper in a humid or damp environment.
Set the appropriate paper type in the printer driver.
The paper type setting may not be appropriate for the
loaded paper.
There may be a temporary problem with the toner or
developer.
Try to perform Dev Refreshor Toner Refreshin the Printer
Adjust Menu. Note that Toner Refreshconsumes the toner.
The toner cartridge may be near the end of its service
life.
If the message on the LCD panel or in EPSON Status Monitor
indicates that the toner cartridge is near the end of its service life,
replace the toner cartridge. See “Replacing Consumable
For Windows users, you can also check the remaining service life
of the toner cartridge by looking at the Basic Settings tab in the
printer driver.
There may be a problem with the photoconductor unit. Replace the photoconductor unit. See “Replacing Consumable
Half-tone images print unevenly
Cause
What to do
Your paper may be moist or damp.
Do not store paper in a humid or damp environment. Be sure to
use paper that is newly unwrapped.
The gradation setting is too small when printing
graphics.
For Windows users, on the Basic Settings tab in the printer driver,
click the Advanced tab and select the More Settings button.
Then select the Halftoning.
Troubleshooting 227
AL-MX300 Series User's Guide
Cause
What to do
The paper type setting may not be appropriate for the
loaded paper.
Set the appropriate paper type in the printer driver.
The toner cartridge may be near the end of its service
life.
If the message on the LCD panel or in EPSON Status Monitor
indicates that the toner cartridge is near the end of its service life,
replace the toner cartridge. See “Replacing Consumable
For Windows users, you can also check the remaining service life
of the toner cartridge by looking at the Basic Settings tab in the
printer driver.
There may be a problem with the toner cartridge.
Replace the toner cartridge. See “Replacing Consumable
There may be a problem with the photoconductor unit. Replace the photoconductor unit. See “Replacing Consumable
Toner smudges
Cause
What to do
Your paper may be moist or damp.
Do not store your paper in a humid or damp environment.
You may not be using the correct type of paper for your Smooth, high-quality copier paper is recommended for best
printer.
on choosing paper.
The paper path inside the printer may be dusty.
There may be a problem with the toner cartridge.
Clean internal printer components by printing three pages with
only one character per page.
Replace the toner cartridge. See “Replacing Consumable
The Highland setting may not be set correctly for
printing in a location at a high altitude.
Select the appropriate value inHighlandof the Printer Adjust
The photoconductor unit may be near the end of its
service life.
Replace the photoconductor unit. See “Replacing Consumable
Troubleshooting 228
AL-MX300 Series User's Guide
Areas are missing in the printed image
Cause
What to do
Your paper may be moist or damp.
This printer is sensitive to moisture absorbed by the paper. The
higher the moisture content in the paper, the lighter the printout.
Do not store paper in a humid or damp environment.
You may not be using the correct type of paper for your If the surface of your paper is too rough, printed characters may
printer.
appear distorted or broken. Smooth, high-quality copier paper is
recommended for best results. See “Available paper types” on
page 267 for information on choosing paper.
Completely blank pages are output
Cause
What to do
The printer may have loaded more than one sheet at a
time.
Remove the paper stack and fan it. Tap it on a flat surface to even
the edges, then reload the paper.
The problem may be with your application or interface
cable.
Print out a configuration status sheet. See “Printing a
Configuration Status Sheet” on page 220. If a blank page is
ejected, the problem may be with the printer. Turn off the printer
and contact your dealer.
The paper size setting may be incorrect.
Make sure the correct paper size is set in the Tray Menuon the
control panel.
The MP Tray Sizesetting may be incorrect.
When loading paper for which the size is not specified with Auto
setting, specify the correct paper size on the MP Tray Size
setting in the Tray Menuon the control panel.
The toner cartridge may be near the end of its service
life.
If the message on the LCD panel or in EPSON Status Monitor
indicates that the toner cartridge is near the end of its service life,
replace the toner cartridge. See “Replacing Consumable
For Windows users, you can also check the remaining service life
of the toner cartridge by looking at the Basic Settings tab in the
printer driver.
There may be a problem with the photoconductor unit. Replace the photoconductor unit. See “Replacing Consumable
Troubleshooting 229
AL-MX300 Series User's Guide
The printed image is light or faint
Cause
What to do
Your paper may be moist or damp.
Cover B may not be closed securely.
The Toner Save mode may be on.
Do not store your paper in a humid or damp environment.
Open cover B, hold both ends of it, and then close again.
Turn off the Toner Save mode using the printer driver or the
printer’s control panel menus.
For Windows users, on the Basic Settings tab in the printer driver,
click Advanced and select the More Settings button. Then
deselect the Toner Save check box.
The Density setting may be too light.
In the printer driver, click Extended Settings on the Optional
Settings tab, and then darken the Density setting.
The Density setting may be set too light in the Printing
Menu.
Increasethevaluewithinthesettingrange(1to5)of Density. See
The paper type setting may not be appropriate for the
loaded paper.
Set the appropriate paper type in the printer driver.
There may be a temporary problem with the toner or
developer.
Try to perform Dev Refreshor Toner Refreshin the Printer
Adjust Menu. Note that Toner Refreshconsumes the toner.
The toner cartridge may be near the end of its service
life.
If the message on the LCD panel or in EPSON Status Monitor
indicates that the toner cartridge is near the end of its service life,
replace the toner cartridge. See “Replacing Consumable
For Windows users, you can also check the remaining service life
of the toner cartridge by looking at the Basic Settings tab in the
printer driver.
There may be a problem with the photoconductor unit. Replace the photoconductor unit. See “Replacing Consumable
The non-printed side of the page is dirty
Cause
What to do
Toner may have spilled onto the paper feed path.
Clean internal printer components by printing three pages with
only one character per page.
Printing was made right after the paper jam.
Make a few one-sided printouts.
Troubleshooting 230
AL-MX300 Series User's Guide
Cause
What to do
The transfer roller may be dusty.
Perform BTR Cleaningin the Printer Adjust Menu. See
The fixing temperature may not be appropriate.
Try to lower the temperature by adjusting the Tempsettings in the
Printer Adjust Menu. However, do this at your risk, as lowering
the temperature too far may prevent normal fixing. See“Printer
Print quality decreased
Cause
What to do
The printer cannot print in the required quality level
because of insufficient memory, and the printer lowers
thequalityautomaticallysothattheprintercancontinue
printing.
Check to see if the printout is acceptable. If not, lower print quality
temporarily in the printer driver.
If RAM Diskis set to Maximumor Normalon the control panel, you
can increase the available memory space by changing this setting
to Off.
Memory Problems
Insufficient memory for current task
Cause
What to do
The printer has insufficient memory for current task.
Reduce the contents of print jobs or lower print quality in the
printer driver.
When RAM Diskis set to Maximumor Normalon the control panel,
you can increase the available memory space by changing this
setting to Off.
Troubleshooting 231
AL-MX300 Series User's Guide
Insufficient memory to print all copies
Cause
What to do
The printer does not have sufficient memory to collate
print jobs.
Reduce the contents of print jobs or lower print quality in the
printer driver.
When RAM Diskis set to Maximumor Normalon the control panel,
you can increase the available memory space by changing this
setting to Off.
Paper Handling Problems
Paper does not feed properly
Cause
What to do
The paper guides are not set correctly.
Make sure that the paper guides in all the paper cassettes and the
MP tray are set to the correct paper size positions.
The paper source setting may not be correct.
There may be no paper in the paper source.
Make sure that you have selected the correct paper source in your
application.
Load paper into the selected paper source.
The size of loaded paper differs from the control panel or
printer driver settings.
Make sure that the correct paper size and paper source are set in
the control panel or printer driver.
Too many sheets may be loaded in the MP tray or paper Make sure that you have not tried to load too many sheets of
cassettes.
paper. For the maximum paper capacity for each paper source,
If paper does not feed from the optional paper cassette For instructions on installing the unit, see “Optional Paper
unit, the unit may not be installed properly.
The pickup roller is dirty.
Clean up the pickup roller. For instructions, see “Cleaning the
The extra-thick paper that is loaded may have the
following problems:
- The paper is too stiff
- The paper is too smooth
- The paper is curled
Feed a paper from the standard lower paper cassette.
When the paper is 279 mm or longer vertically, set 2in the
Specialsetting of the Printer Adjust Menu, set the Paper
Type setting to Special in the printer driver, then try to print
Troubleshooting 232
AL-MX300 Series User's Guide
The printout was on the wrong side of the paper when I did duplex printing.
Cause
What to do
In duplex printing mode, the back side of the paper is
For jobs with three or more pages, set Convert to Simplexto
printed first. However, if Convert to Simplexis set to Offor 1 Pageto do duplex printing.
Odd Page, andajob hasanoddnumberofpages, thelast Forjobswithjustonepage, set Convert to SimplextoOfftodo
page is printed on the front side of the paper.
For single page jobs, printing is done on the front side of
the paper whether Convert to Simplexis set to Odd
Pageor 1 Page.
duplex printing.
Problems Using Options
To confirm your options are installed correctly, print a status sheet. See “Printing a Configuration
Status Sheet” on page 220 for details.
Paper does not feed from the optional paper cassette
Cause
What to do
The paper guides are not set correctly.
Make sure that the paper guides in the optional paper cassettes
are set to the correct paper size positions.
The optional paper cassette may not be installed
properly.
on installing an optional paper cassette unit.
The paper source setting may not be correct.
Make sure you have selected the proper paper source in your
application.
There may be no paper in the paper cassette.
Load paper into the selected paper source.
Too many sheets may be loaded in the paper cassette.
Make sure that you have not tried to load too many sheets of
paper. For the maximum paper capacity for each paper source,
The paper size is not set correctly.
Make sure to set the paper guides in the optional paper cassette
correctly.
Troubleshooting 233
AL-MX300 Series User's Guide
An installed option cannot be used
Cause
What to do
The installed option is not defined in the printer driver.
For Windows users:
You have to make settings manually in the printer driver. See
Correcting USB Problems
If you are having difficulty using printer with a USB connection, see if your problem is listed below,
and take any recommended actions.
USB connections
USB cables or connections can sometimes be the source of USB problems.
For best results, you should connect the printer directly to the computer’s USB port. If you must use
multiple USB hubs, we recommend that you connect the printer to the first-tier hub.
Windows operating system
Your computer must have one of the operating systems supported by this printer pre-installed, or be a
model upgraded from Windows XP, Vista, 7, 8, Server 2003, Server 2008, or Server 2012 to an
operating system supported by this printer. You must not be able to install or run the USB printer
driver on a computer that does not meet these specifications or that is not equipped with a built-in
USB port.
For details about your computer, contact your dealer.
Printer software installation
Incorrect or incomplete software installation can lead to USB problems. Take note of the following
and perform the recommended checks to ensure proper installation.
Troubleshooting 234
AL-MX300 Series User's Guide
Checking printer software installation
When using Windows, you must follow the steps in the Setup Guide packed with the printer to install
the printer software. Otherwise, Microsoft’s Universal driver may be installed instead. To check if the
Universal driver has been installed, follow the steps below.
1. OpentheViewdevicesandprinters (forWindows8orServer2012), DevicesandPrinters (for
Windows 7), Printer (Windows Vista or Server 2008), or Printers and Faxes (for Windows XP
or Server 2003) folder, then right-click the icon of your printer.
2. Click Printing Preferences ("Printing preferences" for Windows 8, 7 or Server 2012) on the
shortcut menu that appears, then right-click anywhere in the driver.
If About is displayed in the shortcut menu that appears, click it. If a message box with the words
“Unidrv Printer Driver” appears, you must reinstall the printer software as described in the Setup
Guide. If About is not displayed, the printer software has been installed correctly.
Note:
For Windows Vista, Vista x64, XP, XP x64, Server 2003, or Server 2003 x64, if the software installation
dialog box appears during the installation process, click Continue Anyway. If you click STOP
Installation, you will have to install the printer software again.
Status and Error Messages
You can see the printer’s status and error messages on the LCD panel. For more information, see
Canceling or Interrupting Printing
Canceling printing
Press the Stop button on the printer’s control panel, and then press the F3 button to select Yes.
To cancel a print job before it is sent from your computer, see “Canceling a Print Job” on page 72.
Troubleshooting 235
AL-MX300 Series User's Guide
Interrupting printing
If the printer is shared, it is possible to interrupt the current print job to print a different print job.
Printing in the PostScript 3 Mode Problems
TheproblemslistedinthissectionarethosethatyoumayencounterwhenprintingwiththePostScript
driver. All procedural instructions refer to the PostScript printer driver.
The printer does not print correctly in the PostScript mode
Cause
What to do
The printer’s emulation mode setting is incorrect.
The printer is set to the Automode by default, so that it can
automatically determine the encoding used in the received print
job data and select the appropriate emulation mode. However,
there are situations where the printer cannot select the correct
emulation mode. In this case, it must be set manually to PS3.
Set the emulation modethrough the SelecType Emulation Menu
on the printer. See “Emulation Menu” on page 144.
The printer’s emulation mode setting for the interface
that you are using is incorrect.
The emulation mode can be set individually for each interface
which receives print job data. Set the emulation mode for the
interface you are using to PS3.
Set the emulation modethrough the SelecType Emulation Menu
on the printer. See “Emulation Menu” on page 144.
The printer does not print
Cause
What to do
An incorrect printer driver is selected.
Make sure that the PostScript printer driver that you are using to
print is selected.
The Emulation Menuin the printer’s Control Panel is set
to a mode other than Autoor PS3for the interface that
you are using.
Change the mode setting to either Autoor PS3.
Troubleshooting 236
AL-MX300 Series User's Guide
Theprinteroritsdriverdoesnotappearinutilitiesintheprinterconfiguration
(Mac OS only)
Cause
What to do
The printer name has been changed.
Ask the network administrator for details, then select the
appropriate printer name.
The font on the printout is different from that on the screen
Cause
What to do
The PostScript screen fonts are not installed.
The PostScript screen fonts must be installed on the computer
that you are using. Otherwise, the font that you select is
substituted by some other font for display on the screen.
Specify the appropriate substitution fonts using the Font
Substitution Table.
For Windows users only
The appropriate substitution fonts are not correctly
specified on the Device Settings tab of the printer’s
Properties dialog box.
The printer fonts cannot be installed
Cause
What to do
TheEmulation Menuin theprinter’sControlPanelisnot Change the Emulation Menusetting to PS3for the interface that
set to PS3for the interface that you are using. you are using, then try reinstalling the printer fonts again.
The edges of texts and/or images are not smooth
Cause
What to do
The Print Quality is set to Fast.
Change the Print Quality setting to Fine.
Troubleshooting 237
AL-MX300 Series User's Guide
The printer does not print normally via the USB interface
Cause
What to do
The printer cannot print binary data when it is connected to the
computer via the USB interface. Make sure that the Data Format
setting, whichis accessed by clicking Advanced on the PostScript
sheet of the printer’s Properties, is set to ASCII or TBCP.
For Windows users only
The Data Format setting in the printer’s Properties is not
set to ASCII or TBCP.
If your computer is running Windows Vista, Vista x64, XP, XP x64,
click the Device Settings tab in the printer’s Properties, then click
the Output Protocol setting and select ASCII or TBCP.
The printer cannot print binary data when it is connected to the
computer via the USB interface. Make sure that the print setting in
the application is set to ASCII encoding.
For Mac OS users only
The print setting in the application is set to binary
encoding.
The printer does not print normally via the network interface
Cause
What to do
If the file is created in an application that allows you to change the
data format or encoding, such as Photoshop, make sure that the
setting in the application matches that in the printer driver.
For Windows users only
The Data Format setting is different from the data format
setting specified in the application.
For Windows users only
ClickAdvanced onthePostScriptsheetoftheprinter’sProperties,
then change the Data Format setting from ASCII data (default) to
TBCP (Tagged binary communications protocol).
The print data is too large.
WhentheBinarysetting issettoOn, TBCPisnotavailable. Usethe
For Windows users only
ClickAdvanced onthePostScriptsheetoftheprinter’sProperties,
then change the Data Format setting from ASCII data (default) to
TBCP (Tagged binary communications protocol).
Printing cannot be performed using the network
interface.
WhentheBinarysetting issettoOn, TBCPisnotavailable. Usethe
An undefined error occurs (Mac OS only)
Cause
What to do
The version of the Mac OS that you are using is
unsupported.
This printer’s driver can only be used on Mac OS computers
running Mac OS X version 10.5.8 or later.
Troubleshooting 238
AL-MX300 Series User's Guide
Scanning Problems
Scanner operational problems
You cannot scan using the Auto Document Feeder
❏ Make sure Auto Detect (Office Mode only), Scanner Glass, ADF - Double-sided, or ADF -
❏ If the document cover or ADF cover is open, close it and try scanning again.
Scanning software problems
You cannot start Epson Scan
❏ If you are using any TWAIN-compliant program, such as Adobe Photoshop Elements, make sure
that the correct scanner is selected as the Scanner or Source setting.
❏ If you upgraded your computer’s operating system, you need to uninstall Epson Scan and reinstall
it.
For Windows:
2. Install Epson Scan from the printer Software Disc.
Note:
If your computer does not have a CD/DVD drive, download the Epson Scan from the Epson website.
For Mac OS X:
1. Download the Uninstaller and Epson Scan from the Epson website.
Troubleshooting 239
AL-MX300 Series User's Guide
2.
Double-click the Uninstaller icon, select the check box for Epson Scan from the list
displayed, and click Uninstall. Then follow the on-screen instructions..
3. Install Epson Scan.
❏ For Windows users, make sure your printer’s name appears under Imaging device without a (?) or
an exclamation (!) mark in the Device Manager window. If the printer’s name appears with one of
these marks or as an Unknown device, uninstall Epson Scan as described in “Uninstalling the
printer software” on page 259, then reinstall it from the printer Software Disc.
Scan quality problems
The edges of your original are not scanned
Move the document or photo about 2 mm (0.08 inch) away from the horizontal and vertical edges of
the document table to avoid cropping.
A line or line of dots always appears in your scanned images
The document table or the exposure window for Auto Document Feeder may be dusty. For details
If you still have the problem, the document table may be scratched. Contact your dealer for assistance.
Straight lines in your image come out crooked
Make sure the document lies perfectly straight on the document table.
Your image is distorted or blurred
❏ Make sure the document or photo lies flat on the document table. Also make sure your document
or photo is not wrinkled or warped.
Troubleshooting 240
AL-MX300 Series User's Guide
❏ Make sure you do not move the document or photo, or your printer while scanning.
❏ Make sure the printer is placed on a flat, stable surface.
Professional Mode” on page 90 for instructions.
❏ Click Configuration, select the Color tab, and select Color Control and Continuous auto
exposure in the Color menu. See Epson Scan Help for details.
❏ Click Configuration, select the Color tab, and click Recommended Value to return the Auto
Exposure Level setting to the default. See Epson Scan Help for details.
Professional Mode” on page 90 for instructions.
Colors are patchy or distorted at the edges of your image
If your document is very thick or curled at the edges, cover the edges with paper to block external light
as you scan.
Your scanned image is too dark
❏ If your original is too dark, try using the Backlight Correction feature in Professional Mode. See
Troubleshooting 241
AL-MX300 Series User's Guide
❏ ClickConfiguration, selectthe Color tab, andchangethe DisplayGamma settingtomatchyour
output device, such as a monitor or printer, in the Color menu. See Epson Scan Help for details.
❏ Click Configuration, select the Color tab, and select Color Control and Continuous auto
exposure in the Color menu. See Epson Scan Help for details.
❏ Click Configuration, select the Color tab, and click Recommended Value to return the Auto
Exposure Level setting to the default. See Epson Scan Help for details.
❏ Click the
Histogram Adjustment icon in Professional Mode to adjust the brightness.
❏ Check the brightness and contrast settings of your computer monitor.
An image on the back of your original appears in your scanned image
Ifyouroriginalisprinted on thin paper, images onthe back may be visible to thescannerandappearin
your scanned image. Try scanning the original with a piece of black paper placed on the back of it. Also
Ripple patterns appear in your scanned image
A ripple or cross-hatch pattern (called moiré) may appear in a scanned image of a printed document.
It is caused by interference from the differing pitches in the scanner’s screen and the halftone screen in
your original.
Original image
Descreening applied
❏ Select the Descreening check box. In Professional Mode, select an appropriate Screen Ruling
Troubleshooting 242
AL-MX300 Series User's Guide
Professional Mode” on page 90 for instructions.
Note:
You cannot remove ripple patterns when you are scanning using a resolution higher than 600 dpi.
Scanned colors differ from the original colors
instructions.
❏ ClickConfiguration, selectthe Color tab, andchangethe DisplayGamma settingtomatchyour
output device, such as a monitor or printer, in the Color menu. See Epson Scan Help for details.
❏ Adjust the Auto Exposure Type setting in Professional Mode. Also try selecting a different Tone
❏ Click Configuration, select the Color tab, and select Color Control and Continuous auto
exposure in the Color menu. See Epson Scan Help for details.
❏ Click Configuration, select the Color tab, and click Recommended Value to return the Auto
Exposure Level setting to the default. See Epson Scan Help for details.
❏ Make sure to enable the Embed ICC Profile setting. In the File Save Settings window, select JPEG
or TIFF as the Type setting. Click Options, then select the Embed ICC Profile check box. To
access the File Save Settings window, see “Scanning in Office Mode” on page 89 or “Scanning in
❏ Check the color matching and color management capabilities of your computer, display adapter,
and software. Some computers can change the palette of colors on your screen. See your software
and hardware manuals for details.
❏ Windows: Use the color management system for your computer, ICM. Add a color profile that
matches your monitor to improve on-screen color matching. Exact color matching is very
difficult. Check your software and monitor documentation for information on color matching
and calibration.
❏ Mac OS X: Use the color management system for your computer, ColorSync. Exact color
matching is very difficult. Check your software and monitor documentation for information on
color matching and calibration.
❏ Printed colors can never exactly match the colors on your monitor because printers and monitors
use different color systems: monitors use RGB (red, green, and blue) and printers typically use
CMYK (cyan, magenta, yellow, and black).
Troubleshooting 243
AL-MX300 Series User's Guide
Images are rotated incorrectly
Make sure the documents or photos are placed on the document table correctly. See “Setting Your
Originals” on page 50 for details.
Copying Problems
Copy operational problems
The printer does not copy
Auto Document Feeder:
Place the original face-up in the Auto Document
Feeder.
document table:
Place the original face-down on the document table.
Copy quality problems
Printout is not fine enough
Cause
What to do
You may not be using the correct type of paper for
copying.
The available paper types for copying are not the same as that for
printing. Whenyoucopyanoriginal, usethecorrecttypeofpaper.
For details of the avairable paper types, see “Basic Copying” on
The information on the back side or background color is printed on the copy
Cause
What to do
The original is almost transparent or extremely thin.
When you copy a thin double-sided original, the information on
the back side of the original may be printed on the copy. Using
black paper or an underlay beneath the original may solve the
problem.
Troubleshooting 244
AL-MX300 Series User's Guide
Cause
What to do
The copy setting may not be matched with the original. Select the settings thatmatchtheoriginalandmake acopy. When
the settings are made correctly, the back side is not copied as the
brightestpartisadjustedtowhite.Thisalsoremovestheyellowish
color in the background.
If these problems cannot be solved even if the settings are made
correctly, select Textfor Document Typeor set the contrast to a
positive value.
Copies are blank, or images are missing or faded
Try one or more of the following solutions.
❏ The accuracy of the copy depends on the quality and size of the original. Try adjusting the contrast
with the printer. If your original is too light, the copy might not be able to compensate, even if you
adjust the contrast.
❏ If the original have a colored background, images in the foreground might blend too much or the
background might appear in a different shade. Adjust the settings before copying or enhance the
image after it has been copied.
Improving copy quality
Try one or more of the following solutions.
❏ Copy from the document table. This will produce a higher quality copy than copying from the
Auto Document Feeder.
❏ Use quality originals.
❏ Open or close the MP tray to accommodate the copy job. If you are copying to standard weight
media, use the paper cassette. If you are copying to heavy media, use the MP tray.
❏ If your printer frequently feeds more than one page at a time, replace the pickup roller.
❏ Use or make a carrier sheet to protect your originals.
Completely blank pages are output
Try one or more of the following solutions.
❏ The original might have been loaded upside down. In the Auto Document Feeder, load the
original with the short edge forward and the side to be scanned facing up.
Troubleshooting 245
AL-MX300 Series User's Guide
❏ If you are getting blank pages when scanning from the document table, make sure the original is
loadedcorrectly. Place the original face-down on the document table with the top left corner of the
document located in the lower right corner of the glass.
The background is dark and dirty
Make sure you have the correct copy quality settings. Try adjusting the settings. See “Making Changes
A line of dots always appears in your scanned image
The exposure window for Auto Document Feeder may be dusty. Clean the table. See “Cleaning the
still have the problem, contact your dealer.
A blank copy is output even though an original is set in the Auto Document Feeder during
scanning.
Check if the document cover or ADF cover is closed firmly.
Faxing Problems
Sending and receiving faxes problems
The document stops feeding during faxing
Try one or more of the following solutions.
❏ The maximum length of a page you can load is 356 mm. Faxing a longer page stops at 356 mm. The
minimum page size for the Auto Document Feeder is 140 ×210mm (5.5 ×8.3 in.). If the item is too
small, it can jam inside the Auto Document Feeder.
❏ Try sending to a different fax machine. There might be problems with the fax machine you are
sending to.
❏ Try one of the followings. There might be problems with the phone line.
Troubleshooting 246
AL-MX300 Series User's Guide
Turn up the speaker volume on the printer and press the Start button on the control panel. If you
hear a dial tone, the phone line is working. To change the speaker volume, see “Basic Settings” on
page 155. Disconnect the printer from the phone jack and connect a phone. Try to make a phone
call to make sure the phone line is working.
The printer is not receiving faxes
Check if Line Typein Basic Settingsis set correctly for your telephone line.
The printer is not sending faxes
Try one or more of the following solutions.
❏ If the printer is in setting mode, finish the setting and try sending the fax again.
❏ If the printer is receiving a fax, try sending the fax again after the fax has been received.
❏ If the PC-FAX function is operating, wait for it to finish and then try sending the fax again.
The printer is receiving faxes but not sending them
Try one or more of the following solutions.
❏ If your printer is on a PBX system, the PBX system might be generating a dial tone the printer
cannot detect. Disable the detect dial tone setting. See “Basic Settings” on page 155.
❏ If you think there might be a poor connection on this phone line, try sending the fax later and see if
it sends successfully.
Faxes you send are not arriving
Try one or more of the following solutions.
❏ Call the recipient to make sure the fax machine is on and ready to receive faxes.
❏ Make sure the fax is still waiting in memory. A fax might be in memory because it is waiting to
redial a busy number, there are other jobs ahead of it waiting to be sent, or the fax is set up for a
delayed send. If a fax job is in memory for any of these reasons, press the Fax Memory button to
show the fax job history and confirm that there is no pending job.
Incoming fax calls are not being answered
Try one or more of the following solutions.
Troubleshooting 247
AL-MX300 Series User's Guide
❏ Check if the Receive Modeis set to Auto. If the Receive Modeis set to Manual, the printer never
answers calls. Answer the phone and start receiving the fax yourself. See “Reception Settings” on
❏ Make sure the printer is connected properly to a phone line.
❏ Check if there are too many devices connected to the phone line. Try removing the last device
connected and see if the printer works. If not, continue removing devices one at a time and retry
after removing each one.
❏ Make sure the phone line is working. Try one of the followings.
Turn up the speaker volume on the printer and press the Start button on the control panel. If you
hear a dial tone, the phone line is working. Disconnect the printer from the phone jack and
connect a phone. Try to make a phone call to make sure the phone line is working.
❏ Check if the printer is out of paper. If the printer is out of paper and its memory is full, it will not be
able to receive faxes. Refill paper in the MP tray or the paper cassette. The printer will print all of
the faxes it has saved in memory and will then resume answering fax calls.
Faxes are transmitting or being received very slowly
Try one or more of the following solutions.
❏ Check if you are sending or receiving a very complex fax. A complex fax, such as one with many
graphics, takes longer to be sent or received.
❏ Check if the receiving fax machine has a slow modem speed. The printer only sends the fax at the
fastest modem speed the receiving fax machine can use.
❏ Check if the resolution at which the fax was sent or received is very high. A higher resolution
typically results in better quality, but also requires a longer transmission time. If you are receiving
the fax, call and ask the sender to lower the resolution and resend the fax. If you are sending, lower
the resolution and resend the fax.
❏ Check if there is a poor phone line connection. If there is a poor phone line connection, the printer
and the receiving fax machine slow down line transmission to adjust for errors. Hang up and
resend the fax. If this does not work, have the phone company check the phone line.
Quality problems occur
Check if Image Quality Selectionand Fax Density Selectionunder the Basic Setting
tab are specified correctly.
Troubleshooting 248
AL-MX300 Series User's Guide
Smudges appear in printouts
Clean the document table. For details, see “Cleaning the document table and the exposure window for
The image of the received data is divided or reduced
Check if the size of the paper being output matches the size of the received data.
Sender information is not printed
Try one or more of the following solutions.
Time setting is incorrect
The time setting may be reset if the printer’s power remains off for a long time. Set the time again in
Printout problems
Faxes are not printing or are printing incorrectly
Make sure there is media in the MP tray or the paper cassette. If there is no media, load the MP tray or
thepapercassette. Anyfaxesreceived while the input tray is empty are storedinmemoryandwillprint
out once the tray has been refilled.
Troubleshooting 249
AL-MX300 Series User's Guide
Chapter 12
About the Printer Software
Using the Printer Software for Windows
Using the printer driver
The printer driver is the software that allows you to adjust printer settings to get the best results.
Note:
The printer driver’s online help provides details on printer driver settings.
Note for Windows Vista users:
Do not press the power button or put your computer to standby or hibernate mode manually during
printing.
Accessing the printer driver
You can access the printer driver directly from any application programs, and from your Windows
operating system.
The printer settings made from any Windows applications override the setting made from the
operating system.
From the application
Click Print, Print Setup, or Page Setup from the File menu. As necessary, click Setup, Options,
Properties, or a combination of these buttons.
Windows 8/Windows Server 2012 users
Right-click the bottom left corner of the screen in the desktop style, select Control Panel. Then click
View devices and printers, right-click the printer, and select Printing preferences.
Note:
To display the control panel without a mouse in the modern UI style, swipe the right edge of the screen to
left, and select Settings in the charm bar menu.
About the Printer Software 250
AL-MX300 Series User's Guide
Windows 7 users
Click the start button, select Devices and Printers. Then right-click the printer and select Printing
preferences.
Windows Vista, Server 2008 users
Click Start, click Control Panel, then double-click Printers. Right-click your printer’s icon, then
click Printing Preferences.
Windows XP, Server 2003 users
Click Start, click Printers and Faxes. Right-click your printer’s icon, then click Printing
Preferences.
Printing a configuration status sheet
To confirm the current status of the printer, print a status sheet from the printer driver.
Note:
Print the configuration status sheet on A4 size paper (Landscape.)
1. Access the printer driver.
2. Click the Optional Settings tab and then click Configuration in Print Status Sheets.
Making Extended Settings
You can make various settings in the Extended Settings dialog box. To open the dialog box, click
Extended Settings on the Optional Settings tab.
Making Optional Settings
The printer driver can update the installed option information automatically by clicking Acquire
from Printer.
1. Access the printer driver.
2. Click the Optional Settings tab, then click Manual Settings.
3. The Optional Settings dialog box appears.
4. Make settings for each installed option, then click OK.
About the Printer Software 251
AL-MX300 Series User's Guide
Displaying consumable product information
The remaining service life of the consumable products is displayed on the Basic Settings tab.
Note:
❏ This function is available only when EPSON Status Monitor is installed.
❏ This information might be different from the information displayed in EPSON Status Monitor. Use
EPSON Status Monitor to get more detailed information about consumable products.
❏ If the genuine consumable products are not used, the level indicator and the alert icon showing the
remaining service life are not displayed.
Ordering consumable products and maintenance parts
Click the Order Online button on the Basic Settings tab. See “Order Online” on page 258 for details.
Note:
This function is available only when EPSON Status Monitor is installed.
Using EPSON Status Monitor
EPSON Status Monitor is a utility program that monitors your printer and gives you information
about its current status.
Installing EPSON Status Monitor
Insert the Software Disc that came with your product and select Product status monitoring and
Automatic updates (RECOMMENDED) on the Software Installation Options screen.
If your computer does not have a CD/DVD drive, go to the following Epson website to download and
install the software.
Note:
If you want to use the printer via the print server, you have to install EPSON Status Monitor with
administrator privileges in each client.
About the Printer Software 252
AL-MX300 Series User's Guide
Accessing EPSON Status Monitor
Click the EPSON Status Monitor tray icon on the taskbar, then select the printer name and menu you
want to access.
Note:
❏ You can also access EPSON Status Monitor by clicking the Simple Status button on the Optional
Settings tab on the printer driver.
❏ The Order Online dialog box also appears by clicking the Order Online button on the Basic Settings
tab in the printer driver.
About
You can obtain information about EPSON Status Monitor such as product versions or
interface versions.
Simple Status
You can check printer status, errors, and warnings.
Detailed Status*
You can monitor detailed printer status. When a problem occurs, the most probable
Replacement Parts
Information*
Job Information*
Notice Settings
Order Online
You can check print job information. See “Job Information” on page 255.
You can make specific monitoring settings. See “Notice Settings” on page 257.
You can order consumable products and maintenance parts online. See “Order Online”
Tray Icon Settings
You can set the information to display when the Tray icon is double-clicked while there
are no jobs sent from the computer.
*
You can also access any of the menus by clicking the appropriate tab on each information window.
Note for Windows XP users:
EPSON Status Monitor is not available when printing from a Remote Desktop connection.
About the Printer Software 253
AL-MX300 Series User's Guide
Detailed Status
Replacement Parts Information
Note:
To change the two windows above, click
or
.
a.
b.
c.
Paper:
Toner:
Displays the paper size, the paper type and the approximate amount of paper remaining in
the paper source.
Indicates the remaining service life of the toner cartridge. The toner icon flashes when the
toner cartridge has some error or has neared the end of its service life.
Photoconductor
Unit:
Indicates the remaining service life of the photoconductor unit. The photoconductor unit
icon flashes when the photoconductor unit has some error or has neared the end of its
service life.
d.
Order Online
button:
Clicking this button enables you to order consumable products and maintenance parts
About the Printer Software 254
AL-MX300 Series User's Guide
e.
Fuser Unit:
Indicates the remaining service life of the fuser unit. The service icon flashes when the fuser
unit has some error or has neared the end of its service life.
Note:
The remaining service lives of the replacement parts are displayed only if genuine Epson parts are used.
Job Information
a.
b.
Job Name:
Status:
Displays the user’s print job names. Other user’s print jobs are displayed as --------.
Waiting:
Spooling:
Deleting:
Printing:
Completed:
Canceled:
Held:
Indicates the print job is waiting to be printed.
Indicates the print job is being spooled on your computer.
Indicates the print job is being deleted.
Indicates the print job is printed currently.
Indicates the print job have finished.
Indicates the print job have been canceled.
Indicates the print job is on hold.
c.
d.
e.
User:
Displays the user name.
Computer:
Job Type:
Displays the name of the computer that sent the print job.
About the Printer Software 255
AL-MX300 Series User's Guide
f.
Cancel Job
button:
Cancels the selected print job.
g.
h.
i.
Print button:
Prints the held status job.
Refresh button:
Refreshes the information on this menu.
Display Settings
button:
Displays the Display Settings dialog box to select items and the order they are displayed on
the Job Information screen and to select the type of jobs to be displayed.
Note for Windows XP users:
Shared Windows XP LPR connections and shared Windows XP Standard TCP/IP connections with
Windows clients do not support the Job Management function.
The Job Information tab is available when the following connections are used:
Server and Client Environments:
❏ When using the shared Windows Server 2012 x64, Server 2008, Server 2008 x64, Server 2003, or
Server 2003 x64 LPR connection with Windows 8, 8 x64, Vista, Vista x64, XP, or XP x64 clients.
❏ When using the shared Windows 8, 8 x64, Vista, Vista x64, Sever 2012 x64, Server 2008, Server
2008 x64, Server 2003, or Server 2003 x64 Standard TCP/IP connection with Windows 8, 8 x64,
Vista, Vista x64, XP, or XP x64.
❏ When using the shared Windows 8, 8 x64, Vista, Vista x64, Server 2012 x64, Server 2008, Server
2008 x64, Server 2003, or Server 2003 x64 EpsonNet Print TCP/IP connection with Windows 8, 8
x64, Vista, Vista x64, XP, or XP x64 clients.
Client only Environments:
❏ When using the LPR connection (in Windows 8, 7, Vista, Vista x64, XP, or XP x64).
❏ When using the Standard TCP/IP connection (in Windows 8, 7, Vista, Vista x64, XP, or XP x64).
❏ When using the EpsonNet Print TCP/IP connection (in Windows 8, 7, Vista, Vista x64, XP, or XP
x64).
Note:
Iftheuseraccount used to log on to a client is different from the user account used to connect to the server,
the job management function is not available.
About the Printer Software 256
AL-MX300 Series User's Guide
Notice Settings
a.
Monitor the printing status check When this check box is selected, EPSON StatusMonitor monitors the printer
box:
status during a print job is processed.
b.
c.
More Settings button:
Pop-up Notice:
Opens the More Settings dialog box to set how to display the tray icon.
Sets the notification to be displayed.
d.
Allow monitoring of shared
printers check box:
When this check box is selected, a shared printer can be monitored by other
computers.
If you connect the printer via a server with Windows Point & Print, it
communicates with the OS communication function. Therefore you can
monitor the printer without selecting this check box.
e.
f.
Display the Order Online window When this check box is selected, the Order Online window appears
automatically check box:
automatically when a replacement part becomes low or reaches end of
service life.
Display once a day when a
replacement part is low check
box:
When this radio button is selected, the Order Online window appears
automatically once a day when you start printing or display the status by
accessing EPSON Status Monitor.
g.
h.
i.
Display only when a replacement When this radio button is selected, the Order Online window appears
part first becomes low check box: automatically only when a replacement part first becomes low.
More Settings button:
Opens theMoreSettingsdialog boxinwhich you can settheURLforplacing
an order appears.
Monitor Settings button:
Opens the Monitor Settings dialog box to set the monitoring interval.
About the Printer Software 257
AL-MX300 Series User's Guide
Note for Windows 8, 7 or Vista users:
When Allowmonitoringofsharedprinters check box is selected, the User Account Control dialog box
will appear. Then click Yes (for Windows 8, or 7) or Continue (for Windows Vista) to make the settings.
Note:
When sharing the printer, be sure to set EPSON Status Monitor so that the shared printer can be
monitored on the print server.
Order Online
a.
Text box:
Displays the replacement parts and codes.
b.
Order Now/Find Dealer button:
Connects to the URL where you can place an order and find the dealer
nearest you.
If you do not want a confirmation message, select the Do notdisplaythe
confirmation message before connecting check box in the More
Settings dialogbox. The More Settings dialog box appearsbyclicking the
More Settings button in the Notice Settings dialog box.
c.
Replacement Parts button:
Displays the replacement parts information.
d.
Do not display this window
automatically until a replacement
When this check box is selected, the Order Online window appears
automaticallyonlywhenareplacementpartfirstbecomesloworreaches
partbecomesloworreachestheend end of service life.
of its service life check box:
About the Printer Software 258
AL-MX300 Series User's Guide
Uninstalling the printer software
To uninstall the printer software, close all applications first, and then uninstall the printer software
from the following menu on the Control Panel.
❏ Uninstall a Program (for Windows 8, Server 2012)
❏ Program and Features (for Windows 7, Vista, Server 2008)
❏ Change or Remove Programs (for Windows XP or Server 2003)
Select the printer software that you want to uninstall, and then click the item below.
❏ Uninstall/Change (for Windows 7, Vista, Server 2008)
❏ Change/Remove (for Windows XP, Server 2003)
Note:
If you uninstall the printer driver, EPSON Status Monitor is also uninstalled.
Using the PostScript Printer Driver
System requirements
Printer hardware requirements
Recommended
No restrictions for the system
Memory
Computer system requirements
Windows
Recommended
Windows 8, 8 x64, 7, 7 x64, Vista, Vista x64, XP, XP x64, Server 2012 x64, Server 2008, Server 2008
OS
x64, Server 2003, or Server 2003 x64
No restrictions for these systems
Remarks
About the Printer Software 259
AL-MX300 Series User's Guide
Mac OS X
Recommended
Mac OS X 10.5.8 or later
OS Version
Computer
Power Mac G3, G4, G5, iMac, eMac, PowerBook G3, G4, or iBook
Note:
If you use binary data for the network connection, you need to set Binaryto Onin the PS3 Menuon the
control panel. For details about the settings, see the Network Guide. If you use the printer with a local
connection, you cannot use binary data.
Using the PostScript printer driver with Windows
To print in the PostScript mode, you will have to install the printer driver. See the appropriate sections
below for installation instructions according to the interface that you are using to print.
Installing the PostScript printer driver for the USB interface
Note:
❏ Installing the printer software for Windows may require administrator privileges. If you have
problems, ask your administrator for more information.
❏ Turn off all virus protection programs before installing the printer software.
1. Make sure that the printer is turned off. Insert the printer Software Disc into your CD-ROM
drive.
Note:
If your computer does not have a CD/DVD drive, download the driver from the Epson website.
2. Connect your computer to the printer with a USB cable, then turn on the printer.
Note for Windows Vista users:
Without the Windows driver or the Adobe PS driver, the display shows “Found New Hardware.” In
this case, click Ask me again later.
About the Printer Software 260
AL-MX300 Series User's Guide
3. For WIndows 8 or 8 x64, right-click the bottom left corner of the screen, select Control Panel,
click View devices and printers, then click Add a printer button.
For Windows 7 or 7 x64, click the start button, select Devices and Printers, and click the Add a
printer button.
For Windows Vista, Vista x64, XP, XP x64, Server 2008, or Server 2008 x64, click Start, point to
Printer and Faxes, and click Add a printer in the Printer Tasks menu.
For Windows 2000, Server 2003, or Server 2003 x64, click Start, point to Settings, and click
Printers. Then double-click the Add Printer icon.
The Add Printer Wizard appears.
4. ForWindows8, 8x64, 7, 7x64, Vista, Vistax64, Server2012, Server2008, orServer2008x64, select
Add a local printer.
For Windows XP, XP x64, 2000, Server 2003, click Next to proceed the next screen, select Local
printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
5. Select USB as the port the printer is connected to, then click Next.
6. Click HaveDisk and specify the following path for the Software Disc. If your CD/DVDdrive is D:,
the path will be D:\Driver\PostScript\<model name>\eppsnt.inf. Then click OK.
Note:
Change the drive letter as needed for your system.
7. Select the printer, then click Next.
8. Follow the on-screen instructions for the rest of the installation.
9. When installation is done, click Finish.
Installing the PostScript printer driver for the network interface
Note:
❏ Set the network settings before installing the printer driver. Refer to the Network Guide that comes
with your printer for details.
❏ Turn off all virus protection programs before installing the printer software.
1. Make sure that the printer is turned on. Insert the printer Software Disc into your CD/DVD drive.
About the Printer Software 261
AL-MX300 Series User's Guide
Note:
If your computer does not have a CD/DVD drive, download the driver from the Epson website.
2. For WIndows 8 or 8 x64, right-click the bottom left corner of the screen in the desktop style, select
Control Panel, click View devices and printers, then click Add a printer button.
For Windows 7 or 7 x64, click the start button, select Devices and Printers, and click the Add a
printer button.
For Windows Vista, Vista x64, XP, XP x64, Server 2008, or Server 2008 x64, click Start, point to
Printer and Faxes, and click Add a printer in the Printer Tasks menu.
For Windows 2000, Server 2003, or Server 2003 x64, click Start, point to Settings, and click
Printers. Then double-click the Add Printer icon.
The Add Printer Wizard appears.
3. ForWindows8, 8x64, 7, 7x64, Vista, Vistax64, Server2012, Server2008, orServer2008x64, select
Add a local printer.
For Windows XP, XP x64, 2000, Server 2003, click Next to proceed the next screen, select Local
printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
4. Select the Create a new port check box and select Standard TCP/IP Port from the drop-down
list. Click Next.
5. (For Windows XP, 2000, or Server 2003 users only) Click Next.
6. Specify the IP address and port name, then click Next.
7. Click Finish.
8. Click HaveDisk in the Add Printer Wizard and specify the following path for the Software Disc. If
your CD/DVD drive is D:, the path will be D:\Driver\PostScript\<model name>\eppsnt.inf. Then
click OK.
Note:
Change the drive letter as needed for your system.
9. Select the printer and click Next.
About the Printer Software 262
AL-MX300 Series User's Guide
10. Follow the on-screen instructions for the rest of the installation.
11. When installation is done, click Finish.
Accessing the PostScript printer driver
You can change the PostScript printer driver settings in the PostScript printer driver. To access the
Using the PostScript printer driver with Mac OS X
Installing the PostScript printer driver
Go to the following Epson support website to download and install the driver.
http://support.epson.net/ (outside Europe)
Selecting the printer
After installing the PostScript 3 printer driver, you need to select the printer.
In a network environment
Note:
❏ You need to make the settings for your installed options manually when the printer is connected
using USB, IP printing, or Bonjour.
❏ Make sure to specify ASCII as the data format in the application.
1. Open the System Preferences, and then double-click the Print & Fax ("Print & Scan" for Mac OS X
10.8 or 10.7) icon.
The Print & Fax ("Print & Scan" for Mac OS X 10.8 or 10.7) window appears.
2. Click
in the Printers window.
3. Select the printer name that you are using from the printer name box.
Note:
If your printer is not listed, check that it is correctly connected to the computer and that the printer is
on.
4. Click Add.
About the Printer Software 263
AL-MX300 Series User's Guide
5. Confirm that your printer’s name is added to the Printers list. Then quit Print & Fax ("Print &
Scan" for Mac OS X 10.8 or 10.7).
Accessing the PostScript printer driver
You can change the PostScript printer driver settings in the PostScript printer driver.
Changing the printer setup settings
You can change or update the printer setup settings according to the options installed in your printer.
1. Open the System Preferences, and then double-click the Print & Fax ("Print & Scan" for OS X
10.8 or 10.7) icon.
2. Select the printer from the list.
3. Select Options & Supplies.
4. Make necessary changes to the settings, then close the dialog box.
5. Quit Print & Fax ("Print & Scan" for Mac OS 10.8 or 7).
Using the PCL Printer Driver
Using Epson Universal P6 Printer Driver
EpsonUniversalP6PrinterDriveristheuniversalPCL6compatibleprintdriverthathasthefollowing
features:
❏ It supports the basic print functions needed for business situations.
❏ It supports multiple Epson business printers besides this printer.
❏ It supports most languages among the print drivers for this printer.
Computer system requirements
Your computer must be running one of the supported Microsoft Windows versions listed in the table
below, and must meet the system requirements of its operating system.
About the Printer Software 264
AL-MX300 Series User's Guide
Recommended
Windows 8, 8 x64, 7, 7 x64, Vista, Vista x64, XP, XP x64, Server 2012 x64, Server 2008, Server 2008
x64, Server 2003, or Server 2003 x64
OS
No restrictions for these systems
Remarks
Supported Printers
If your CD/DVD drive is D:, open Epson_Universal_P6_Supplement.txt in the D:\Driver
\PCLUniversal, and refer to Supported Printers.
Supported Languages
If your CD/DVD drive is D:, open Epson_Universal_P6_Supplement.txt in the D:\Driver
\PCLUniversal, and refer to Supported Languages.
Installing the Printer Driver
1. Insert the printer Software Disc into your CD/DVD drive.
Note:
If your computer does not have a CD/DVD drive, download the driver from the Epson website, and
then install it.
2. If your CD/DVD drive is D:, double-click EP_P6x86.exe in the D:\Driver\PCLUniversal
\<model name>\Win32\ for 32-bit Windows OS or EP_P6x64.exe in the D:\Driver
\PCLUniversal\<model name>\Win64\ for 64-bit Windows OS.
Note:
Change the drive letter as needed for your system.
3. Follow the on-screen instructions.
After the installation is done, access your printer's Properties to customize the settings and
Printing Preferences to make the appropriate printer driver settings.
Note:
The printer driver's online help provides details on printer driver settings.
About the Printer Software 265
AL-MX300 Series User's Guide
Uninstalling the printer driver
Note:
The procedure below uses Windows 7 as an example.
1. Close all applications.
2. Access Program and Features on the Control Panel.
3. Select Epson Universal Laser P6, and then click Uninstall/Change.
Follow the on screen instructions.
About the Printer Software 266
AL-MX300 Series User's Guide
Appendix A
Technical Specifications
Paper
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any
time, Epson cannot guarantee the quality of any type of paper. Always test samples of paper stock
before purchasing large quantities or printing large jobs.
Available paper types
Paper type
Description
Weight: 60 to 80 g/m² (Recycled paper is acceptable.*)
Plain paper
Envelopes
Labels
No paste and no tape. No plastic window. (unless specifically designed for
laser printers.)
The backing sheet should be covered completely, with no gaps between
labels.
Semi thick paper
Thick paper
Weight: 81 to 105 g/m²
Weight: 106 to 163 g/m²
Extra thick paper
Paper with letterhead
Weight: 164 to 216 g/m²
Paper and ink of letterheads must be compatible with laser printers.
*
Userecycledpaperonlyundernormaltemperatureandhumidityconditions. Poorqualitypapermayreduceprintquality,
or cause paper jams and other problems.
Paper that should not be used
You cannot use the following paper in this printer. It may cause printer damage, paper jams, and poor
print quality:
❏ Media meant for other black-and-white laser printers, color laser printers, color copiers,
black-and-white copiers, or ink jet printers
❏ Previously printed paper by any other black-and-white laser printers, color laser printers, color
copiers, black-and-white copiers, ink jet printers, or thermal transfer printers
Technical Specifications 267
AL-MX300 Series User's Guide
❏ Carbon paper, carbonless paper, thermal-sensitive paper, pressure-sensitive paper, acid paper, or
paper that uses high-temperature-sensitive ink (around 180˚C)
❏ Labels that peel easily or labels that do not cover the backing sheet completely
❏ Special surface-coated paper or special surface-colored paper
❏ Paper that has binder holes or is perforated
❏ Paper that has glue, staples, paper clips, or tape on it
❏ Paper that attracts static electricity
❏ Moist or damp paper
❏ Paper of uneven thickness
❏ Overly thick or thin paper
❏ Paper that is too smooth or too rough
❏ Paper that is different on the front and back
❏ Paper that is folded, curled, wavy, or torn
❏ Paper of irregular shape, or paper that does not have right angle corners
Printable area
The assured printable area is an area 4 mm from all sides.
* 4 mm
Note:
The printable area may be smaller depending on the application.
Technical Specifications 268
AL-MX300 Series User's Guide
Printer
General
Printing method:
Laser beam scanning and dry electrophotographic process
Resolution:
600 × 600 dpi, 1200 × 1200 dpi
Continuous printing speed*1
Paper feed:
:
Up to 35 pages per minute on A4 size paper
Automatic or manual feed
Paper feed alignment:
Input paper supply:
MP tray:
Center alignment for all sizes
plain paper
Up to a 5.5 mm thick stack, or up to 50 sheets (80
g/m²)
envelopes
Up to 5.5 mm
labels
Up to 5.5 mm
semi thick paper
thick paper
extra thick paper
plain paper
Up to a 5.5 mm thick stack
Up to a 5.5 mm thick stack
Up to a 5.5 mm thick stack
Standard lower paper cassette:
Uptoa27mmthickstack, orupto250sheets(80
g/m²)
labels
Up to a 10 mm thick stack
Up to a 27 mm thick stack
Up to a 10 mm thick stack
Up to a 10 mm thick stack
semi thick paper
thick paper
extra thick paper
plain paper
Optional paper cassette unit:
Uptoa27mmthickstack, orupto250sheets(80
g/m²)
labels
Up to a 10 mm thick stack
Up to a 27 mm thick stack
Up to a 10 mm thick stack
Up to a 10 mm thick stack
semi thick paper
thick paper
extra thick paper
Technical Specifications 269
AL-MX300 Series User's Guide
Paper output:
Face-down tray
Face-down tray
ECP/Page
For all paper types and sizes
Up to 150 sheets of plain paper (80 g/m²)
Paper output capacity:
Printer language:
ESC/P 2 24-pin printer emulation (ESC/P 2 mode)
ESC/P 9-pin printer emulation (FX mode)
IBM Proprinter emulation (I239X mode)
Adobe PostScript3 (PS3 mode)
PCL6/PCL5 emulation (PCL mode)
PDF 1.6*2
Resident fonts:
RAM:
84 scalable fonts, and 7 bitmap fonts for ESC/Page
95 scalable fonts, and 5 bitmap for PCL5
80 scalable fonts, and 1 bitmap for PCL6
136 scalable fonts for PostScript3
1024 MB
*1 Printing speed varies by paper type or other conditions.
*2 Available only when used over a network.
Scanner
Scanner type
Flatbed color image scanner
4-lines CCD (R, G, B, B/W)
216 × 297 mm (8.5 × 11.7 in.)
10,200 × 14,040 pixels at 1200 dpi
A4, Letter (LT)
Photoelectric device
Effective area
Effective pixels
Document size
Image data
16 bits per pixel per color internal
1 to 8 bits per pixel per color external
Auto Document Feeder
Type:
Page transportation and duplex scanning with automatic reverse.
4-lines CCD (R, G, B, B/W)
Photoelectric device
Effective area
216 × 356 mm (8.5 × 14.0 in.)
Technical Specifications 270
AL-MX300 Series User's Guide
Effective pixels
Maximum paper size:
Capacity:
5100 × 8400 pixels at 600 dpi
Legal (LGL)
Up to 50 sheets (75 g/m²)
60 to 125 g/m²
Weight:
Document layout:
Life cycle:
Center
100,000 times or 5 years, whichever comes sooner
Copy
Copy mode
First copy
Black and White
A4/ 600 dpi
8.2 sec
Copy speed
Multi-copy
Continuous copy (ADF)
35 ppm
27.4 ppm
Fax (DNF model only)
Supported communications lines
PSTN (subscriber lines)
PBX (independent premises internal lines)
Communication speed
33600/ 31200/ 28800/ 26400/ 24000/ 21600/ 19200/ 16800/ 14400/
12000/ 9600/ 7200/ 4800/ 2400 bps
Protocol
G3, G3ECM
Transmission and reception mode
Image compression method
Transmits and receives 1 bit monochrome
MH, MR, MMR
Transmission and reception of scanning line
density
16 × 15.4, 8 × 15.4, 8 × 7.7. 8 × 3.85 dot/mm
Document size
Document table
A4, Letter
Auto Document Feeder
A4, Letter, Legal
A4, Letter, Legal
Print paper size
Technical Specifications 271
AL-MX300 Series User's Guide
Environmental
Temperature:
In use:
5 to 32˚C (41 to 89.6˚F)
Not in use:
-20 to 40˚C (-4 to 104˚F)
15 to 85% RH
Humidity:
In use:
Not in use:
5 to 85% RH
Altitude*:
3,100 meters (10,171 feet) maximum
*
If the printer is used at an altitude greater than 1000 m, adjust the value in the Highlandsetting of the Printer Adjust
Mechanical
Dimensions
Height: 503 mm (19.8 in.)
Width: 430 mm (16.2 in.)
Depth: 426 mm (16.8 in.)
Weight
DN model
Approx. 18.6 kg (about 41.0 lb)
(Excluding consumable products and options)
DNF model
Approx. 18.8 kg (about 41.5 lb)
(Excluding consumable products and options)
Electrical
DN model
220-240 V
DNF model
220-240 V
DNF model
110-127 V
Rated voltage
220 V-240 V
50 Hz / 60 Hz
6.0 A
220 V-240 V
50 Hz / 60 Hz
6.0 A
110 V-127 V
50 Hz / 60 Hz
11.0 A
Rated frequency
Rated current
Technical Specifications 272
AL-MX300 Series User's Guide
DN model
220-240 V
DNF model
220-240 V
DNF model
110-127 V
Power
consumption
During
printing
Avarage
MAX
409 W
940 W
37 W
395 W
940 W
38 W
453 W
850 W
36 W
During ready mode
During sleep mode*
3.02 W
3.26 W
3.25 W
During deep sleep
mode
0.98 W
0 W
0.99 W
-
1.07 W
-
During power off
mode
*
Values represent power consumption while all operations are completely suspended. Power consumption varies
depending on operating conditions, and whether a USB memory is inserted.
Note for users in Taiwan:
Rated voltage of this printer in Taiwan is 110 V to 127V.
Standard and approvals
European model:
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
EN 60950-1
EN 62311
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
R& TTE directive 1999/5/EC
(DNF model only)
TBR21
EN 60950-1
❏ For Europen users:
We, Seiko Epson Corporation, hereby declare that this equipment, model L733B is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Technical Specifications 273
AL-MX300 Series User's Guide
For use only in:
Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg,
Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway,Sweden, Iceland, Cyprus, Greece,
Slovenia, Malta, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia,
and Croatia.
Indication of the manufacturer and the importer in accordance with requirements of
directive 2011/65/EU (RoHS)
Manufacturer:
Address:
SEIKO EPSON CORPORATION
3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan
Telephone:
81-266-52-3131
Importer:
Address:
EPSON EUROPE B.V.
Azië building, Atlas ArenA, Hoogoorddreef 5, 1101 BA Amsterdam
Zuidoost The Netherlands
Telephone:
31-20-314-5000
Interfaces
USB interface
Hi-Speed USB - Compatible with the USB 2.0 Specification
Note:
❏ Your computer must support Hi-Speed USB or USB in order to use Hi-Speed USB or USB as the
interface to connect your computer to the printer.
❏ Since Hi-Speed USB is fully compatible with USB, USB can be used as an interface.
Technical Specifications 274
AL-MX300 Series User's Guide
USB Host interface
Hi-Speed USB - Compatible with the USB 2.0 Specification
Note:
Contact your dealer about supported devices.
Ethernet interface
You can use an IEEE 802.3 1000BASE-T/100BASE-TX/10BASE-Te straight-through shielded,
twisted-pair interface cable with an RJ45 connector.
Options
Optional paper cassette unit
Product code:
Paper size:
C12C802791
A4, A5, B5, Letter (LT), Half Letter (HLT), Legal (LGL), Government Letter (GLT),
Government Legal (GLG), Executive (EXE), F4
Paper weight:
Paper feed:
60 to 216 g/m² (16 to 57.5 lb)
One optional paper cassette unit can be installed.
Automatic feed delivery system
Cassette capacity up to 250 sheets
Paper types:
Plain paper, Semi thick paper, Preprinted paper, Letterhead, Recycled paper, Color
paper, Thick paper, Extra thick paper, Labels, Special
Dimensions and weight:
Height:
Width:
Depth:
Weight:
90 mm (3.5 in.)
430 mm (16.9 in.)
399 mm (15.7 in.)
3 kg (6.6 lb) including cassette
Note:
This product conforms to CE marking requirements in accordance with EC Directive 2004/108/EC.
Technical Specifications 275
AL-MX300 Series User's Guide
Consumable Products
Toner cartridge/Return toner cartridge
6089*1
6090*1
6091*1
Product code/Model:
High Capacity Toner Cartridge
Standard Capacity Toner Cartridge
Return High Capacity Toner Cartridge*2
0 to 35˚C (32 to 95˚F)
Storage temperature:
Storage humidity:
15 to 80% RH
*1 This product conforms to CE marking requirements in accordance with EMC Directive 2004/108/EC.
*2 Return toner cartridge is not sold in some areas. Contact your local Epson dealer/representative about the availability of
the Return toner cartridge scheme.
Maintenance Parts
Photoconductor Unit
1228*
Product code/Model:
Photoconductor Unit (Black)
Storage temperature:
Storage humidity:
0 to 35˚C (32 to 95˚F)
15 to 80% RH
*
This product conforms to CE marking requirements in accordance with EMC Directive 2004/108/EC.
Fuser Unit
3049/3050*1*2
Product code/Model:
Storage temperature:
Storage humidity:
0 to 35˚C (32 to 95˚F)
15 to 80% RH
*1 This product conforms to CE marking requirements in accordance with EMC Directive 2004/108/EC.
*2 Fuser unit part numbers vary by location.
Technical Specifications 276
AL-MX300 Series User's Guide
Appendix B
Where To Get Help
Contacting Epson Support
Before Contacting Epson
If your Epson product is not operating properly and you cannot solve the problem using the
troubleshooting information in your product documentation, contact Epson support services for
assistance. If Epson support for your area is not listed below, contact the dealer where you purchased
your product.
Epson support will be able to help you much more quickly if you give them the following information:
❏ Product serial number
(The serial number label is usually on the back of the product.)
❏ Product model
❏ Product software version
(Click About, Version Info, or similar button in the product software.)
❏ Brand and model of your computer
❏ Your computer operating system name and version
❏ Names and versions of the software applications you normally use with your product
Help for Users in Europe
Check your Pan-European Warranty Document for information on how to contact Epson support.
Help for Users in Taiwan
Contacts for information, support, and services are:
Where To Get Help 277
AL-MX300 Series User's Guide
Information on product specifications, drivers for download, and products enquiry are available.
Epson HelpDesk (Phone: +0280242008)
Our HelpDesk team can help you with the following over the phone:
❏ Sales enquiries and product information
❏ Product usage questions or problems
❏ Enquiries on repair service and warranty
Repair service center:
Telephone number
Fax number
Address
02-23416969
02-23417070
No.20, Beiping E. Rd., Zhongzheng Dist., Taipei City 100,
Taiwan
02-27491234
02-32340688
039-605007
038-312966
03-4393119
03-5325077
04-23011502
04-23380879
02-27495955
02-32340699
039-600969
038-312977
03-4396589
03-5320092
04-23011503
04-23386639
1F., No.16, Sec. 5, Nanjing E. Rd., Songshan Dist., Taipei City
105, Taiwan
No.1, Ln. 359, Sec. 2, Zhongshan Rd., Zhonghe City, Taipei
County 235, Taiwan
No.342-1, Guangrong Rd., Luodong Township, Yilan
County 265, Taiwan
No.87, Guolian 2nd Rd., Hualien City, Hualien County 970,
Taiwan
5F., No.2, Nandong Rd., Pingzhen City, Taoyuan County
32455, Taiwan (R.O.C.)
1F., No.9, Ln. 379, Sec. 1, Jingguo Rd., North Dist., Hsinchu
City 300, Taiwan
3F., No.30, Dahe Rd., West Dist., Taichung City 40341,
Taiwan (R.O.C.)
No.209, Xinxing Rd., Wuri Dist., Taichung City 414, Taiwan
(R.O.C.)
05-2784222
06-2221666
05-2784555
06-2112555
No.463, Zhongxiao Rd., East Dist., Chiayi City 600, Taiwan
No.141, Gongyuan N. Rd., North Dist., Tainan City 704,
Taiwan
Where To Get Help 278
AL-MX300 Series User's Guide
Telephone number
Fax number
Address
07-5520918
07-5540926
1F., No.337, Minghua Rd., Gushan Dist., Kaohsiung City
804, Taiwan
07-3222445
08-7344771
07-3218085
08-7344802
No.51, Shandong St., Sanmin Dist., Kaohsiung City 807,
Taiwan
1F., No.113, Shengli Rd., Pingtung City, Pingtung County
900, Taiwan
Where To Get Help 279
AL-MX300 Series User's Guide
Appendix C
Software License Terms
Open Source Software Licenses
This product contains a number of open-source software. The following table indicates the list of the
open-source software which this product uses and these licenses.
Software license
Software version
Application software package
linux-2.6.35-arm1-epson12
ethtool-2.6.35
GNU GPL
GNU General Public License Version 2,
June 1991 or later
busybox-1.17.4
GNU LGPL
GNULesserGeneralPublicLicenseVersion
2, June 1991 or later
uclibc-0.9.32
BSD license
-
busybox-1.17.4
busybox-1.17.4
Net-SNMP
Sun RPC license
Net-SNMP license
ncftp license
-
-
-
ncftp-3.2.4
cyrus-sasl license
libkrb license
-
cyrus-sasl 2.1.25
libkrb 5-1.10.3
OpenLDAP 2.4.30
OpenSSL 1.0.1c
wpa supplicant 0.7.3
-
OpenLDAP license
OpenSSL license
WPA Supplicant
Apache Licence
-
-
-
the Apache License Version 2.0
mDNSResponder-107.6
OpenSSL 1.0.1c
NICTA Licence
NICTA Public Source Licence version 1.0
mDNSResponder-107.6
For the detailed explanation about open-source software licenses, see the OSS.pdf.
Software License Terms 280
AL-MX300 Series User's Guide
Other Software Licenses
libtiff
libtiff Copyright © 1988-1997 Sam Leffler Copyright © 1991-1997 Silicon Graphics, Inc. Permission
to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby
grantedwithoutfee, providedthat (i) the above copyright notices and this permission notice appear in
all copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon
Graphics may not be used in any advertising or publicity relating to the software without the specific,
prior written permission of Sam Leffler and Silicon Graphics. THE SOFTWARE IS PROVIDED
“AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE,
INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON
GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE,
AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE
USE OR PERFORMANCE OF THIS SOFTWARE.
Info-ZIP
This is version 2007-Mar-4 of the Info-ZIP license. The definitive version of this document should be
available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely and a copy at http://
www.info-zip.org/pub/infozip/license.html.
Copyright © 1990-2007 Info-ZIP. All rights reserved.
For the purposes of this copyright and license, “Info-ZIP” is defined as the following set of individuals:
Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter
Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath,
Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor
Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe
Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda, Christian Spieler, Cosmin Truta, Antoine
Verheijen, Paul von Behren, Rich Wales, Mike White.
Software License Terms 281
AL-MX300 Series User's Guide
Permission is granted to anyone to use this software for any purpose, including commercial
applications, and to alter it and redistribute it freely, subject to the above disclaimer and the following
restrictions:
1. Redistributions of source code (in whole or in part) must retain the above copyright notice,
definition, disclaimer, and this list of conditions.
2. Redistributions in binary form (compiled executables and libraries) must reproduce the above
copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other
materials provided with the distribution. The sole exception to this condition is redistribution of a
standard UnZipSFX binary (including SFXWiz) as part of a self-extracting archive; that is
permitted without inclusion of this license, as long as the normal SFX banner has not been
removed from the binary or disabled.
3. Alteredversions--including, butnotlimitedto, portstonewoperatingsystems, existingportswith
new graphical interfaces, versions with modified or added functionality, and dynamic, shared, or
static library versions not from Info-ZIP--must be plainly marked as such and must not be
misrepresentedasbeingtheoriginalsourceor, ifbinaries, compiledfromtheoriginalsource. Such
altered versions also must not be misrepresented as being Info-ZIP releases--including, but not
limited to, labeling of the altered versions with the names “Info-ZIP” (or any variation thereof,
including, but not limited to, different capitalizations), “Pocket UnZip,” “WiZ” or “MacZip”
without the explicit permission of Info-ZIP. Such altered versions are further prohibited from
misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or the Info-ZIP URL(s), such
as to imply Info-ZIP will provide support for the altered versions.
4. Info-ZIP retains the right to use the names
“Info-ZIP,” “Zip,” “UnZip,” “UnZipSFX,” “WiZ,” “Pocket UnZip,” “Pocket Zip,” and “MacZip”
for its own source and binary releases.
ArcFour
This code illustrates a sample implementation of the Arcfour algorithm.
Copyright © April 29, 1997 Kalle Kaukonen. All Rights Reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted
provided that this copyright notice and disclaimer are retained.
Software License Terms 282
AL-MX300 Series User's Guide
THIS SOFTWARE IS PROVIDED BY KALLE KAUKONEN AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL KALLE KAUKONEN OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY TH EORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Software License Terms 283
AL-MX300 Series User's Guide
Fax Settings menu
Fuser unit
J
M
Maintenance
Maintenance Parts
G
Guides
MP tray
H
N
Help
O
Optional paper cassette unit
Options
I
Installing options
Interfaces
Overlay
Index 285
AL-MX300 Series User's Guide
Printer driver
Printer driver settings
Printer software (Windows)
P
Paper
Paper Jam
Paper source
Photoconductor unit
PostScript printer driver
Precautions
Print layout
Printing Directly from a USB Memory
Problems
Product
Printer
R
Index 286
AL-MX300 Series User's Guide
U
S
Scan
W
Scanner
Watermark
Special media
Status sheet
Z
T
Toner cartridge
Index 287
|