Table of Contents
Table of Contents
Preface................................................................................. i
Access Point mode ........................................................16
WDS with AP mode ......................................................18
WDS mode .......................................................................20
Wireless Client mode....................................................22
Authentication Types ........................................................24
Open System/Shared Key Authentication ...........24
WPA/WPA2-Personal Authentication......................25
WPA/WPA2-Enterprise Authentication ..................26
802.1x Authentication..................................................27
LAN .........................................................................................28
IPv6 ..........................................................................................29
Advanced Settings.....................................................................30
Performance.........................................................................30
Wireless Resource Control.......................................................32
Multi-SSID..............................................................................34
VLAN........................................................................................35
VLAN List...........................................................................35
Port List..............................................................................36
Add/Edit VLAN ................................................................37
PVID Setting.....................................................................38
Intrusion.................................................................................39
Schedule ................................................................................40
Internal RADIUS Server.....................................................41
ARP Spoofing Prevention Settings...............................42
Bandwidth Optimization .................................................43
AP Array..................................................................................45
Product Overview.............................................................. 1
Package Contents......................................................................... 1
System Requirements................................................................. 2
Introduction ................................................................................... 3
Features............................................................................................ 4
Hardware Overview..................................................................... 5
Top Panel ................................................................................. 5
Hardware Overview..................................................................... 6
Bottom Panel.......................................................................... 6
Physical Installation .......................................................... 7
Before You Begin................................................................... 7
Connect to your Network.......................................................... 8
Method 1 - Powered by PoE Switch ............................... 8
Method 2 - Powered by PoE Injector............................. 9
Method 3 - DC Adapter.....................................................10
Mounting the AP ........................................................................11
Wireless Installation Considerations....................................12
Four Operational Modes .................................................13
Configuration...................................................................14
Web-based Configuration Utility..........................................14
Save and Activate Settings......................................................15
Basic Settings...............................................................................16
Wireless .................................................................................16
D-Link DAP-2230 User Manual
ii
Table of Contents
AP Array Scan ..................................................................45
Client Information ..............................................................68
WDS Information ................................................................69
Channel Analyze .................................................................70
Statistics .................................................................................71
Ethernet.............................................................................71
WLAN Traffic ....................................................................72
Log ...........................................................................................73
View Log............................................................................73
Log Settings.....................................................................74
Maintenance ...............................................................................76
Administration Settings ...................................................76
Limit Administrator.......................................................77
System Name Settings.................................................78
Login Settings .................................................................79
Console Settings ............................................................80
SNMP Settings ................................................................81
Status:.................................................................................82
Ping Control.....................................................................82
Central WiFiManager Settings...................................83
Firmware and SSL Certification Upload..............................84
Configuration File Upload.......................................................85
Time and Date .............................................................................86
System ....................................................................................87
System Settings..............................................................87
Help .................................................................................................88
Configuration Settings.................................................46
Auto-RF..............................................................................47
Load Balance ...................................................................48
Captive Portal Authentication........................................49
Web Redirection Only ..................................................49
Username/Password.....................................................50
Username/Password.....................................................50
Passcode ...........................................................................51
Remote Radius................................................................52
LDAP...................................................................................53
POP3...................................................................................55
Login Page Upload.............................................................56
Login Page Upload.............................................................56
IP Filter....................................................................................57
MAC Bypass...........................................................................58
DHCP Server ........................................................................59
Dynamic Pool Settings.................................................59
Static Pool Setting .........................................................60
Current IP Mapping List...............................................61
Filters.......................................................................................62
Wireless MAC ACL..........................................................62
WLAN Partition ...............................................................63
Traffic Control.......................................................................64
Uplink/Downlink Settings ..........................................64
QoS......................................................................................65
Traffic Manager...............................................................66
Status .............................................................................................67
Device Information ............................................................67
Wireless Security .............................................................89
What is WEP?................................................................................90
Configure WEP.............................................................................91
D-Link DAP-2230 User Manual
iii
Table of Contents
What is WPA?................................................................................92
Configure WPA/WPA2 Personal .............................................93
Configure WPA/WPA2 Enterprise..........................................94
Connect to a Wireless Network.......................................95
Using Windows® XP ....................................................................95
Configure WPA-PSK....................................................................96
Using Windows Vista® ...............................................................98
Configure WPA-PSK................................................................. 100
Using Windows® 7.................................................................... 101
Troubleshooting ............................................................104
Wireless Basics ...............................................................108
What is Wireless?...................................................................... 109
Tips................................................................................................ 111
Wireless Modes......................................................................... 112
Networking Basics.........................................................113
Check your IP address............................................................ 113
Statically Assign an IP address............................................ 114
Technical Specifications................................................115
Antenna Pattern ............................................................117
Regulatory Information ................................................118
D-Link DAP-2230 User Manual
iv
Section 1 - Product Overview
Package Contents
DAP-2230 Wireless N PoE Access Point
Wall mounting bracket with
mounting kit
12 V DC, 1 A Power Adapter (included with
some models)
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating will cause damage and void the warranty for this product.
D-Link DAP-2230 User Manual
1
Section 1 - Product Overview
System Requirements
• An Ethernet-based Network
• IEEE 802.11n/g wireless clients (AP Mode)
• IEEE 802.11n/g wireless network (AP Mode)
Network Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Web-based Configuration
Utility Requirements
Browser Requirements:
• Microsoft Internet Explorer® 7, Mozilla® Firefox® 12.0,
Google® Chrome 20.0, or Safari® 4 or higher
Windows® Users: Make sure you have the latest version of Java installed.
D-Link DAP-2230 User Manual
2
Section 1 - Product Overview
Introduction
The D-Link DAP-2230 Wireless N PoE Access Point is an 802.11n compliant device that delivers real world performance of up to
300 Mbps* while still maintaining backwards compatibility with slower 802.11g and 802.11b devices. The DAP-2230 increases
productivity by allowing you to work faster and more efficiently. With the DAP-2230, bandwidth-intensive applications like
graphics or multimedia will benefit significantly because large files are now able to move across the network more quickly.
Create a secure wireless network to share photos, files, music, video, printers, and network storage outside of your normal
internal networking environment. Built to withstand harsh environments, the DAP-2230 also excels in connecting separate
networks that cannot be joined physically using a traditional medium. The built-in omni-directional 3 dBi antenna is designed
to deliver high performance, ensuring that wireless coverage will cover even hard to reach locations. The DAP-2230 is an ideal
solution for quickly creating and extending a wireless local area network (WLAN) in offices or other workplaces, hotels, resorts,
trade shows, and special events.
The DAP-2230 features four different operation modes: Access Point, Wireless Distribution System (WDS), WDS with AP, and
Wireless Client mode, allowing it to adapt to many situations. As a standard wireless Access Point (AP) the DAP-2230 can connect
to a wide range of devices that are 802.11 n/g/b compliant. In WDS mode it can expand current wireless coverage without the
need for a wired backbone link. As a wireless client it can connect to an existing AP, and expand the network physically with
the built-in 10/100 Ethernet port.
The DAP-2230 supports 64/128-bitWEP data encryption andWPA/WPA2 security functions. In addition, it provides MAC Address
Filtering to control user access, and the Disable SSID Broadcast function to limit unauthorized access to the internal network.
Network administrators have multiple options for managing the DAP-2230, including Web (HTTP) or Secured Web (HTTPS).
For advanced network management, administrators can use SNMP v1, v2c, v3 to configure and manage access points.
*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data
throughout rate.
D-Link DAP-2230 User Manual
3
Section 1 - Product Overview
Features
• Faster Wireless Networking - The DAP-2230 provides an up to 300 Mbps* wireless connection with other 802.11n
wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online
gaming, and real-time audio.
• Compatible with IEEE802.11g Devices - The DAP-2230 is still fully compatible with the 802.11g standards, so it can
connect with existing 802.11g adapters.
• Four different operation modes - Capable of operating in one of four different operation modes to meet your wireless
networking needs: Access Point, WDS with AP, WDS, and Wireless Client.
• Power over Ethernet - The DAP-2230 supports IEEE 802.3af PoE (Power over Ethernet) which enables it to be supplied
with power over an Ethernet cable or IEEE 802.3af PoE switch.
• ComprehensiveWeb-Interface - Fine tune network settings using the DAP-2230’s robust network-based configuration
software.
• Central WiFiManager management software compatibility - The real-time display of the network’s topology and
AP’s information makes network configuration and management of multiple devices quick and simple.
• SNMP for management - The DAP-2230 supports SNMP v1, v2c, and v3 for better network management. Superior
wireless AP manager software is bundled with the DAP-2230 for network configuration and firmware upgrade.
Systems administrators can also set up the DAP-2230 easily with the Web-based configuration utility.
• Convenient Installation - The DAP-2230 features a wall mount in the rear for easy setup on walls.
D-Link DAP-2230 User Manual
4
Section 1 - Product Overview
Hardware Overview
Top Panel
1
Power/Status LED
Static Green
Ready/Working Properly
Flashing Green Transmitting/Receiving data
Flashing Red Malfunction during boot
1
Solid Red
Boot failure
D-Link DAP-2230 User Manual
5
Section 1 - Product Overview
Hardware Overview
Bottom Panel
1
2
3
4
1
2
Security Lock
Physically secure your device with this lock.
Connector for a power adapter.
Power Connector
Connect an Ethernet cable to this device and your network. Power may be supplied
to this port via a LAN cable that is connected to a PoE injector or PoE switch.
3
10/100 LAN (PoE)Port
Press and hold the reset button with a paperclip for at least 5 seconds to reset the
device back to the factory default settings. The LED will turn on for 2 seconds and
then begin the reboot process.
4
Reset Button
D-Link DAP-2230 User Manual
6
Section 2 - Installation
Physical Installation
Before You Begin
This chapter describes safety precautions and product information that you must know and check before installing this product.
Professional Installation Required
1. Please seek assistance from a professional installer who is well trained in RF installation and knowledgeable about local
regulations.
2. This product is distributed through distributors and system installers with professional technicians and is not to be sold
directly through retail stores.
D-Link DAP-2230 User Manual
7
Section 2 - Installation
Connect to your Network
To power the access point, you can use one of the following 3 methods:
Method 1 - Powered by PoE Switch
Method 2 - Powered by PoE Injector
Method 3 - Powered by DC Adapter
Method 1 - Powered by PoE Switch
1. Connect one end of an Ethernet cable into the LAN (PoE) port on the DAP-2230 and then connect the other end to a PoE
switch.
DAP-2230
PoE Switch
D-Link DAP-2230 User Manual
8
Section 2 - Installation
Method 2 - Powered by PoE Injector
If you wish to power the DAP-2230 without a PoE switch, we suggest you use a PoE injector, such as a DPE-101GI.
1. Connect one end of an Ethernet cable into the DATA IN port on the PoE injector and the other end into a port on a switch,
router, or computer.
2. Connect one end of a different Ethernet cable into the P+DATA OUT port on the PoE injector and the other end into the LAN
(PoE) port on the DAP-2230 access point.
3. Connect the supplied power adapter to the POWER IN connector on the PoE Injector.
4. Plug the power adapter into a power outlet.
DAP-2230
Power
PoE Base
adapter
Unit
PC
Switch
D-Link DAP-2230 User Manual
9
Section 2 - Installation
Method 3 - DC Adapter
A power adapter is included with some DAP-2230 models.
1. Connect an Ethernet cable from your network device to the LAN(PoE) port on the DAP-2230.
2. Connect the supplied power adapter to the DC IN connector on the DAP-2230.
3. Plug the power adapter into a power outlet.
DAP-2230
Power Adapter
Switch or Router
PC
D-Link DAP-2230 User Manual
10
Section 2 - Installation
Mounting the AP
Place the mounting bracket on a wall or ceiling and mark holes
where you will insert the screws with a marker. Drill holes in the
marked points and insert the plastic wall anchors.
Reattach the DAP-2230 to the mounting bracket.
Use the supplied screws to attach the mounting plate to the wall.
D-Link DAP-2230 User Manual
11
Section 2 - Installation
Wireless Installation Considerations
The D-Link DAP-2230 Wireless N PoE Access Point lets you access your network using a wireless connection from virtually
anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location
of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.Typical ranges vary depending
on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless
range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link access point and other network devices to a minimum.
Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters). Position your devices so that
the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree
angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless access points, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish
tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4 Ghz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 Hz phone
base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not
in use.
D-Link DAP-2230 User Manual
12
Section 2 - Installation
Four Operational Modes
Operation Mode
(Only supports 1 mode at a time)
Function
Access Point (AP)
Create a wireless LAN
Wirelessly connect multiple networks
while still functioning as a wireless AP
WDS with AP
WDS
Wirelessly connect multiple networks
AP acts as a wireless network adapter for
your Ethernet-enabled device
Wireless Client
D-Link DAP-2230 User Manual
13
Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link Wireless N PoE Access Point using the web-based configuration
utility.
Web-based Configuration Utility
If you wish to change the default settings or optimise the
performance of the DAP-2230, you may use the web-
based configuration utility.
To access the configuration utility, open a web browser
such as Internet Explorer and enter http://192.168.0.50
Type admin and then enter your password. Leave the
password blank by default.
If you get a Page Cannot be Displayed error, please refer
D-Link DAP-2230 User Manual
14
Section 3 - Configuration
After successfully logging into the DAP-2230, the following screen will appear:
Save and Activate Settings
When making changes on most of the configuration screens in this section, use the
screen to save (not activate) your configuration changes.
button at the bottom of each
You may change settings to multiple pages before activating. Once you are finished, click the Configuration button located
at the top of the page and then click Save and Activate.
D-Link DAP-2230 User Manual
15
Section 3 - Configuration
Basic Settings
Wireless
Access Point mode
Wireless Select 2.4 Ghz from the drop-down menu.
Band:
Mode: Select Access Point from the drop-down menu.
The other three choices are WDS with AP, WDS, and wireless Client.
Network Service Set Identifier (SSID) is the name designated for a specific wireless
Name local area network (WLAN). The SSID’s factory default setting is dlink. The
(SSID): SSID can be easily changed to connect to an existing wireless network or
to establish a new wireless network. The SSID can be up to 32 characters
and is case-sensitive.
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
Visibility: across the network, thus making it visible to all network users. This feature
is enabled by default.
Auto Enabling this feature automatically selects the channel that provides the
Channel best wireless performance. Enable is set by default. The channel selection
Selection: process only occurs when the AP is booting up.
Channel: All devices on the network must share the same channel. To change the
channel, first toggle the Auto Channel Selection setting to Disable, and then
use the drop-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless
settings.
D-Link DAP-2230 User Manual
16
Section 3 - Configuration
Channel Allows you to select the channel width you would like to operate in. Select
Width: 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz
allows you to connect to both 802.11n and 802.11b/g wireless devices on
your network.
Authentication: Use the drop-down menu to choose Open System, Shared Key, WPA-
Personal, WPA-Enterprise, or 802.11x.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share
the same WEP settings. If multi-SSID is enabled, this option is not available.
Select WPA-Personal to secure your network using a password and dynamic
key changes. No RADIUS server is required.
Select WPA-Enterprise to secure your network with the inclusion of a RADIUS
server.
Select 802.1x to secure your network using 802.1x authentication.
D-Link DAP-2230 User Manual
17
Section 3 - Configuration
WDS with AP mode
In WDS with AP mode, the DAP-2230 wirelessly connects multiple networks while still functioning as a wireless AP.
Wireless Select 2.4 Ghz from the drop-down menu.
Band:
Mode: WDS with AP mode is selected from the drop-down menu.
The other three choices are Access Point, WDS, and wireless Client.
Network Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Name
(SSID):
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Visibility:
Auto Enabling this feature automatically selects the channel that will provide the
best wireless performance. This feature is not supported in WDS with AP
mode.The channel selection process only occurs when the AP is booting up.
Channel
Selection:
Channel: To change the channel, use the drop-down menu to make the desired
selection. (Note: The wireless adapters will automatically scan and match
the wireless settings.)
Channel Indicates whether the device is capable of 20 MHz operation only or both
20 MHz and 40 MHz operation.
Width:
Remote AP Enter the MAC addresses of the APs on your network that will serve as bridges
to wirelessly connect multiple networks.
MAC Address:
Site Survey: Click on the Scan button to search for available wireless networks, then click
on the available network that you want to connect with.
D-Link DAP-2230 User Manual
18
Section 3 - Configuration
Authentication: Use the drop-down menu to choose Open System or WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and dynamic
key changes. No RADIUS server is required.
D-Link DAP-2230 User Manual
19
Section 3 - Configuration
WDS mode
In WDS mode, the DAP-2230 wirelessly connects multiple networks, without functioning as a wireless AP.
Wireless Select 2.4 Ghz from the drop-down menu.
Band:
Mode: WDS is selected from the drop-down menu.
The other three choices are Access Point, WDS with AP, and wireless Client.
Network Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Name
(SSID):
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Visibility:
Auto Enabling this feature automatically selects the channel that will provide the
best wireless performance. This feature is not supported in WDS with AP
mode.The channel selection process only occurs when the AP is booting up.
Channel
Selection:
Channel: To change the channel, use the drop-down menu to make the desired
selection. (Note: The wireless adapters will automatically scan and match
the wireless settings.)
Channel Indicates whether the device is capable of 20 MHz operation only or both
20 MHz and 40 MHz operation.
Width:
Remote Enter the MAC addresses of the APs on your network that will serve as bridges
to wirelessly connect multiple networks.
AP MAC
Address:
Site Survey: Click on the Scan button to search for available wireless networks, then click
on the available network that you want to connect with.
D-Link DAP-2230 User Manual
20
Section 3 - Configuration
Authentication: Use the drop-down menu to choose Open System or WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and dynamic
key changes. No RADIUS server is required.
D-Link DAP-2230 User Manual
21
Section 3 - Configuration
Wireless Client mode
Wireless Select 2.4 Ghz from the drop-down menu.
Band:
Mode: Wireless Client is selected from the drop-down menu.
The other three choices are Access Point, WDS with AP, and WDS.
Network Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Name
(SSID):
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users. Disabling
SSID is not supported in Wireless Client mode.
Visibility:
Auto Enabling this feature automatically selects the channel that will provide
the best wireless performance. This feature is automatically enabled in
Wireless Client mode. The channel selection process only occurs when the
AP is booting up.
Channel
Selection:
Channel: To change the channel, use the drop-down menu to make the desired
selection. (Note: The wireless adapters will automatically scan and match
the wireless settings.)
Channel Indicates whether the device is capable of 20 MHz operation only or both
20 MHz and 40 MHz operation.
Width:
Click on the Scan button to search for available wireless networks, then
click on the available network that you want to connect with.
D-Link DAP-2230 User Manual
22
Section 3 - Configuration
Authentication: Use the drop-down menu to choose Open System or WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and
dynamic key changes. No RADIUS server is required.
Wireless Mac Check to enable clone MAC. This feature will allow you to change the MAC
Clone Enable: address of the access point to the MAC address of a client.
MAC Source: Select the MAC source from the drop-down menu.
MAC Address: Enter the MAC address that you would like to assign to the access point.
D-Link DAP-2230 User Manual
23
Section 3 - Configuration
Authentication Types
Each of the wireless modes on the DAP-2230 support different types of wireless encryption security standards. Not every mode
supports all types of encryption.
Open System/Shared Key Authentication
All wireless modes on the DAP-2230 support Open System/Shared Key Authentication.
Encryption Use the radio button to disable or enable encryption.
Key Type: Select HEX* or ASCII**.
Key Size: Select 64 Bits or 128 Bits.
Key Index Select the 1st through the 4th key to be the active key:
(1-4):
Key: Input up to four keys for encryption. You will select one of these keys in
the Key Index drop-down menu.
*Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.
**ASCII (American Standard Code for Information Interchange) is a code that
represents English letters using numbers ranging from 0-127.
D-Link DAP-2230 User Manual
24
Section 3 - Configuration
WPA/WPA2-Personal Authentication
WPA/WPA2 Personal Authentication can be enabled for Access Point, WDS with AP, WDS, and Wireless Client modes.
WPA Mode: When WPA-Personal is selected for Authentication type, you must also select
aWPA mode from the drop-down menu: AUTO (WPA orWPA2), WPA2 Only,
or WPA Only. WPA andWPA2 use different algorithms. AUTO (WPA orWPA2)
allows you to use both WPA and WPA2.
Cipher Type: When you select WPA-Personal, you must also select AUTO, AES, or TKIP
from the drop-down menu.
Group Key Select the interval during which the group key will be valid.The default value
Update: of 3600 is recommended.
Select Manual to enter your key (PassPhrase).
You can select Periodical Key Change to have the access point automatically
change your PassPhrase.
Periodical Enter the Activate From time and the time in hours to change the key.
Key Change:
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the
corresponding field.
Confirm Type the passphrase again to guard against typos.
PassPhrase:
D-Link DAP-2230 User Manual
25
Section 3 - Configuration
WPA/WPA2-Enterprise Authentication
WPA/WPA2 Enterprise Authentication can only be enabled for Access Point mode.
WPA Mode: When WPA-Enterprise is selected, you must also select a WPA mode from
the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only.
WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) allows you
to use both WPA and WPA2.
Cipher When WPA-Enterprise is selected, you must also select a cipher type from
the drop-down menu: Auto, AES, or TKIP.
Type:
Group Key Selecttheintervalduringwhichthegroupkeywillbevalid.Therecommended
value is 3600. A lower interval may reduce data transfer rates.
Update
Interval:
Network Enable or disable Microsoft Network Access Protection.
Access
Protection:
RADIUS Enter the IP address of the RADIUS server.
Server:
RADIUS Enter the RADIUS port.
Port:
RADIUS Enter the RADIUS secret.
Secret:
D-Link DAP-2230 User Manual
26
Section 3 - Configuration
802.1x Authentication
802.1x Authentication can only be enabled for Access Point mode.
Key Update Select the interval during which the group key will be valid (300 is the
recommended value). A lower interval may reduce data transfer rates.
Interval:
RADIUS Enter the IP address of the RADIUS server.
Server:
RADIUS Enter the RADIUS port.
Port:
RADIUS Enter the RADIUS secret.
Secret:
D-Link DAP-2230 User Manual
27
Section 3 - Configuration
LAN
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for
the DAP-2230. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
Get IP From: Static IP (Manual) is chosen here. Choose this option if you do not have a
DHCP server in your network, or if you wish to assign a static IP address to
the DAP-2230. When Dynamic IP (DHCP) is selected, the other fields here
will be grayed out. Please allow about two minutes for the DHCP client to
be functional once this selection is made.
IP Address: The default IP address is 192.168.0.50. Assign a static IP address that is within
the IP address range of your network.
Subnet Enter the subnet mask. All devices in the network must share the same
Mask: subnet mask.
Default Enter the IP address of the gateway in your network. If there is a gateway in
Gateway: your network, please enter an IP address within the range of your network.
DNS: Enter the DNS IP address used here.
D-Link DAP-2230 User Manual
28
Section 3 - Configuration
IPv6
Enable IPv6: Check to enable the IPv6.
Get IP From: Auto is the default option. The DAP-2230 will get an IPv6 address
automatically or use Static to set IPv6 address manually. When Auto is
selected, the other fields here will be grayed out.
IP Address: Enter the LAN IPv6 address used here.
Prefix: Enter the LAN subnet prefix length value used here.
Default Enter the LAN default gateway IPv6 address used here.
Gateway:
D-Link DAP-2230 User Manual
29
Section 3 - Configuration
Advanced Settings
Performance
Wireless: Use the drop-down menu to turn the wireless function On or Off.
Wireless The different combination of clients that can be supported include Mixed
Mode: 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n
Only. Please note that when backwards compatibility is enabled for legacy
(802.11g/b) clients, degradation of 802.11n wireless performance is expected.
Data Rate*: Indicate the base transfer rate of wireless adapters on the wireless LAN.
The AP will adjust the base transfer rate depending on the base rate of the
connected device. If there are obstacles or interference, the AP will step down
the rate. This option is enabled in Mixed 802.11g and 802.11b mode. The
choices available are Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.
Beacon Beacons are packets sent by an access point to synchronize a
Interval (25- wireless network. Specify a value in milliseconds. The default (100) is
500): recommended. Setting a higher beacon interval can help to save the
power of wireless clients, while setting a lower one can help a wireless
client connect to an access point faster.
DTM Select a Delivery Traffic Indication Message setting between 1 and 15.
Interval The default value is 1. DTIM is a countdown informing clients of the next
(1-15): window for listening to broadcast and multicast messages.
Transmit This setting determines the power level of the wireless transmission.
Power: Transmitting power can be adjusted to eliminate overlapping of wireless
area coverage between two access points where interference is a major
concern. For example, if wireless coverage is intended for half of the area,
then select 50% as the option. Use the drop-down menu to select 100%,
50%, 25%, or 12.5%.
*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate.
D-Link DAP-2230 User Manual
30
Section 3 - Configuration
WMM (Wi-Fi WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the
Multimedia): user experience for audio and video applications over a Wi-Fi network.
Ack Time Out To effectively optimize throughput over long distance links, enter a value
(2.4 GHZ, for Acknowledgement Time Out from 64 to 200 microseconds in the 2.4
64~200): GHz in the field provided.
Short GI: Select Enable or Disable. Enabling a short guard interval can increase
throughput. However, be aware that it can also increase the error rate
in some installations due to increased sensitivity to radio-frequency
installations.
IGMP Select Enable or Disable. Internet Group Management Protocol allows
Snooping: the AP to recognize IGMP queries and reports sent between routers and
an IGMP host (wireless STA). When IGMP snooping is enabled, the AP
will forward multicast packets to an IGMP host based on IGMP messages
passing through the AP.
Multicast Rate: Select the multicast rate for 2.4G band.
Multicast Adjust the multicast packet data rate here. The multicast rate is supported
Bandwidth in AP mode and WDS with AP mode, including Multi-SSIDs.
Control:
Maximum Set the multicast packets maximum bandwidth pass through rate from
Multicast the Ethernet interface to the Access Point.
Bandwidth :
HT20/40 Enable this option to reduce interference from other wireless networks in
Coexistence: your area. If the channel width is operating at 40 MHz and there is another
wireless network’s channel over-lapping and causing interference, the
Access Point will automatically change to 20 MHz.
Transfer Enable to transfer the DHCP Offer to Unicast from LAN to WLAN, it is
DHCP Offer recommended to enable this function if the number of stations is larger
to Unicast : than 30.
D-Link DAP-2230 User Manual
31
Section 3 - Configuration
Wireless Resource Control
The Wireless Resource Control window is used to configure the wireless connection settings so that devices can detect and
connect to the Access Point with the strongest signal.
Wireless band: Select 2.4 Ghz.
Connection Select Enable or Disable. This is an option for load balancing. This de-
Limit: termines whether to limit the number of users accessing this device. The
exact number is entered in the User Limit field below. This feature allows
the user to share the wireless network traffic and the client using multiple
APs. If this function is enabled and when the number of users exceeds this
value, or the network utilization of this AP exceeds the percentage that
has been specified, the DAP-2230 will not allow clients to associate with
the AP.
User Limit: Set the maximum amount of users that are allowed access (zero to 64 us-
ers) to the device using the specified wireless band. The default setting is
20.
11n Use the drop-down menu to Enable the 11n Preferred function. The wire-
Preferred: less clients with 802.11n protocol will have higher priority to connect to
the device.
Network Set the maximum utilization of this access point. The DAP-2230 will not
Utilization: allow any new clients to associate with the AP if the utilization exceeds
the specified value. Select a utilization percentage between 100%, 80%,
60%, 40%, 20%, or 0%. When this network utilization threshold is reached,
the device will pause for one minute to allow network congestion to dis-
sipate.
Aging out: Use the drop-down menu to select the criteria of disconnecting the wire-
less clients. Available options are RSSI and Data Rate.
D-Link DAP-2230 User Manual
32
Section 3 - Configuration
RSSI When RSSI is selected in the Aging out drop-down menu, select the per-
Threshold: centage of RSSI here. When the RSSI of wireless clients is lower than the
specified percentage, the device disconnects the wireless clients.
Data Rate When Data Rate is selected in the Aging out drop-down menu, select
Threshold: the threshold of data rate here. When the data rate of wireless clients is
lower than the specified number, the device disconnects the wireless
clients.
ACL RSSI: Use the drop-down menu to Enable the function. When enabled, the de-
vice denies the connection request from the wireless clients with the RSSI
lower than the specified threshold below.
ACL RSSI Set the ACL RSSI Threshold.
Threshold:
D-Link DAP-2230 User Manual
33
Section 3 - Configuration
Multi-SSID
The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID.
The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Enable Check to enable support for multiple SSIDs.
Multi-SSID:
Band: This read-only value is the current band setting.
Index: You can select up to three multi-SSIDs. With the Primary SSID, you have a
total of four multi-SSIDs.
SSID Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID’s factory default setting is dlink. The
SSID can be easily changed to connect to an existing wireless network or
to establish a new wireless network.
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Visibility:
Security: The Multi-SSID security can be Open System, WPA-Personal, WPA-
Enterprise, or 802.1x. For a detailed description of the Open System
parameters, please go to page 26. For a detailed description of the WPA-
Personal parameters, please go to page 27. For a detailed description
of the WPA-Enterprise parameters, please go to page 28. For a detailed
description of the 802.1x parameters, please go to page 29.
Priority: Check the Enable Priority box at the top of this window to enable. Select
the priority from the drop-down menu.
WMM (Wi-Fi Select Enable or Disable.
Multimedia):
D-Link DAP-2230 User Manual
34
Section 3 - Configuration
VLAN
VLAN List
The DAP-2230 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary Multiple SSID, and
WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2230 without a VLAN
tag will have a VLAN tag inserted with a PVID.
The VLAN List tab displays the current VLANs.
VLAN Use the radio button to toggle between Enable or Disable. Next, go to the
Add/Edit VLAN tab to add or modify an item on the VLAN List tab.
Status:
D-Link DAP-2230 User Manual
35
Section 3 - Configuration
Port List
The Port List tab displays the current ports. If you want to configure guest and internal networks on a Virtual LAN (VLAN),
the switch and DHCP server you are using must also support VLANs. As a prerequisite step, configure a port on the switch for
handling VLAN tagged packets as described in the IEEE 802.1Q standard.
VLAN Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN
tab to add or modify an item on the VLAN List tab.
Status:
Port Name: The name of the port is displayed in this column.
Tag VID: The Tagged VID is displayed in this column.
Untag VID: The Untagged VID is displayed in this column.
PVID: The Port VLAN Identifier is displayed in this column.
D-Link DAP-2230 User Manual
36
Section 3 - Configuration
Add/Edit VLAN
The Add/Edit VLAN tab is used to configure VLANs. Once you have made the desired changes, click the Save button to let
your changes take effect.
VLAN Use the radio button to toggle to Enable.
Status:
VLAN ID: Provide an ID number between 1 and 4094 for the Internal VLAN.
VLAN Enter the VLAN to add or modify.
Name:
D-Link DAP-2230 User Manual
37
Section 3 - Configuration
PVID Setting
The PVID Setting tab is used to enable/disable the Port VLAN Identifier Auto Assign Status as well as to configure various types
of PVID settings. Click the Save button to let your changes take effect.
VLAN Status: Use the radio button to toggle between Enable and Disable.
PVID Auto Use the radio button to toggle PVID auto assign status to Enable.
Assign Status:
D-Link DAP-2230 User Manual
38
Section 3 - Configuration
Intrusion
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save
button to let your changes take effect.
AP List: The choices include All, Valid, Neighbor, Rogue, and New.
Detect: Click this button to initiate a scan of the network.
D-Link DAP-2230 User Manual
39
Section 3 - Configuration
Schedule
The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let
your changes take effect.
Wireless Use the drop-down menu to enable the device’s scheduling feature.
Schedule:
Name: Enter a name for the new scheduling rule in the field provided.
Index: Select the SSID the schedule will apply to from the drop-down menu.
SSID: Enter the name of your wireless network (SSID).
Day(s): Toggle the radio button between All Week and Select Day(s). If the second
option is selected, check the specific days you want to apply the rule to.
All Day(s): Check this box to have your settings apply 24 hours a day.
Start Time: Enter the start time for your rule. If you selected All Day, this option will be
greyed out.
End Time: Enter the end time for your rule.
Add: Click to add the rule to the list.
Schedule This section will display the list of created schedules.
Rule List:
Save: Click the Save button to save your created rules.
D-Link DAP-2230 User Manual
40
Section 3 - Configuration
Internal RADIUS Server
The DAP-2230 features a built-in RADIUS server. Once you have finished adding a RADIUS account, click the Save button to
have your changes take effect. The newly-created account will appear in this RADIUS Account List. The radio buttons allow the
user to enable or disable the RADIUS account. Click the icon in the delete column to remove the RADIUS account. We suggest
you limit the number of accounts to under 30.
User Name: Enter a name to authenticate user access to the internal RADIUS server.
Password: Enter a password to authenticate user access to the internal RADIUS server.
The length of your password should be 8~64.
Status: Toggle the drop-down menu between Enable and Disable.
RADIUS Displays the list of users.
Account List:
D-Link DAP-2230 User Manual
41
Section 3 - Configuration
ARP Spoofing Prevention Settings
The ARP Spoofing Prevention feature allows users to add IP/MAC address mapping to prevent ARP spoofing attacks.
ARP This check box allows you to enable the ARP spoofing prevention function.
Spoofing
Prevention:
Gateway Enter a gateway IP address.
IP Address:
Gateway Enter a gateway MAC address.
MAC Address:
D-Link DAP-2230 User Manual
42
Section 3 - Configuration
Bandwidth Optimization
The Bandwidth Optimization window allows the user to manage the bandwidth of the access point and adjust the bandwidth
for various wireless clients. After inputting a Bandwidth Optimization rule, click the Add button. To discard a Bandwidth
Optimization Rule setting, click the Clear button. Click the Save button to let your changes take effect.
Enable Use the drop-down menu to Enable the Bandwidth Optimization function.
Bandwidth
Optimization:
Downlink Enter the downlink bandwidth of the device in Mbits per second.
Bandwidth:
Uplink Enter the uplink bandwidth of the device in Mbits per second.
Bandwidth:
Rule Type: Use the drop-down menu to select the type that is applied to the rule.
Available options are: Allocate average BW for each station, Allocate
maximum BW for each station, Allocate different BW for 11b/g/n stations,
and Allocte specific BW for SSID.
Allocate AP will distribute average bandwidth for each client.
average BW for
each station:
Allocate Specify the maximum bandwidth for each connected client. Reserve certain
bandwidth for future clients.
maximum BW
for each station:
Allocate The weight of 11b/g/n client are 10%/20%/70%. AP will distribute different
bandwidth for 11b/g/n clients.
different BW
for b/g/n
stations:
D-Link DAP-2230 User Manual
43
Section 3 - Configuration
Allocate All clients share the total bandwidth.
specific BW
for SSID:
Band: Use the drop-down menu to toggle the wireless band 2.4 Ghz.
SSID Index: Use the drop-down menu to select the SSID for the specified wireless band.
Downlink Enter the downlink speed limit in either Kbits/sec or Mbits/sec for the rule.
Speed:
Uplink Enter the upload speed limit in either Kbits/sec or Mbits/sec for the rule.
Speed:
D-Link DAP-2230 User Manual
44
Section 3 - Configuration
AP Array
AP Array Scan
The AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to simplify
management. Click the Save button to let your changes take effect. Central WiFiManager and AP Array are mutually exclusive
functions.
Enable AP Select the check box to enable the AP array function. The three modes that
are available are Master, Backup Master, and Slave. APs in the same array
will use the same configuration. The configuration will sync the Master AP
to the Slave AP and the Backup Master AP when a Slave AP and a Backup
Master AP join the AP array.
Array:
AP Array Enter an AP array name for the group here.
Name:
AP Array Enter an AP array password for the group here. This password must be the
same on all the APs in the group.
Password:
Scan AP Click this button to initiate a scan of all the available APs currently on the
network.
Array List:
Connection Display the AP array connection status.
Status:
AP Array This table displays the current AP array status for the following parameters:
Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total.
List:
Current This table displays all the current array members. The DAP-2230 AP array
feature supports up to eight AP array members.
Members:
D-Link DAP-2230 User Manual
45
Section 3 - Configuration
Configuration Settings
In the AP array configuration settings windows, users can specify which settings all the APs in the group will inherit from the
master AP. Make the desired selections in this window and click the Save button to accept the changes.
Enable AP Select to Enable or Disable the AP array configure feature here.
Array
Configuration:
Wireless Select this option to specify the basic wireless settings that the APs in the
group will inherit.
Basic
Settings:
Wireless Select this option to specify the advanced wireless settings that the APs in
the group will inherit.
Advanced
Settings:
Multiple Select this option to specify the multiple SSIDs and VLAN settings that the
APs in the group will inherit.
SSID &
VLAN:
Advanced Select this option to specify the other advanced settings that the APs in the
group will inherit.
Functions:
Administration Select this option to specify the administrative settings that the APs in the
group will inherit.
Settings:
D-Link DAP-2230 User Manual
46
Section 3 - Configuration
Auto-RF
In this window, users can view and configure the automatic radio frequency settings as well as configure the auto-initiate
period and threshold values. Click the Save button to accept the changes made.
Enable: Select to Enable or Disable the auto-RF feature here.
Auto-RF:
Initiate Click the Auto-RF Optimize button to initiate the auto-RF optimization
feature.
Auto-RF:
Auto-Initiate: Select the Enable or Disable the auto-initiate feature here.
Auto-Initiate After enabling the auto-initiate option, the auto-initiate period value can
be entered here. This value must be between 1 and 24 hours.
Period:
RSSI Select the RSSI threshold value here. This value is listed in the drop-down
menu in increments of 10% from 10% to 100%.
Threshold:
RF Report Enter the RF report frequency value here.
Frequency:
D-Link DAP-2230 User Manual
47
Section 3 - Configuration
Load Balance
In this window, users can view and configure the AP array’s load balancing settings. Click the Save button to accept the changes
made.
Enable Load Select to Enable or Disable the load balance feature here.
Balance:
Active Enter the active threshold value here.
Threshold:
D-Link DAP-2230 User Manual
48
Section 3 - Configuration
Captive Portal Authentication
Captive Portal is a built-in web authentication server. When a client connects to an AP, the user’s web browser will be redirected
to a web authentication page. In this configuration option, administrators can view and configure the Captive Portal settings.
Web Redirection Only
After selecting Web Redirection Only as the Authentication Type, you can configure the redirection website URL that will be
applied to each wireless client that connects to this network.
Session Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
timeout
(1-1440):
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication Select the captive portal encryption type here. Options to choose from
are Web Redirection, Username/Password, Passcode, Remote RADIUS,
LDAP and POP3.
Type:
Web Web Redirection State is automatically enabled when Web Redirection
Authentication is selected.
Redirection
State:
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
D-Link DAP-2230 User Manual
49
Section 3 - Configuration
Username/Password
After selecting Username/Password as the Authentication Type, administrators can configure the Username and Password
that each wireless client will be prompted for when requesting access to the network.
Session Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
timeout
(1-1440):
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication Select the captive portal encryption type here. Options to choose from are
Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP
and POP3.
Type:
Web By default web redirection is disabled. Select enable to activate the website
redirection feature.
Redirection
State:
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
Username: Enter the username for the new account here.
Password: Enter the password for the new account here.
D-Link DAP-2230 User Manual
50
Section 3 - Configuration
Passcode
After selecting Passcode as the Authentication Type, administrators can configure the Passcode that each wireless client will
be prompted for when requesting access to the network. A passcode will be randomly generated upon clicking Add.
Session Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
timeout
(1-1440):
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication Select the captive portal encryption type here. Options to choose from are
Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP
and POP3.
Type:
Web By default web redirection is disabled. Select enable to activate the website
redirection feature.
Redirection
State:
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
Passcode Enter the number of passcodes to generate.
Quantity:
Duration: Enter the duration value, in hours, for the passcode(s).
Last Active Select the year, month, day, and hour when this passcode will expire.
Day:
User Limit: Enter the maximum amount of users that can use this passcode at the same time
D-Link DAP-2230 User Manual
51
Section 3 - Configuration
Remote Radius
After selecting Remote RADIUS as the Authentication Type, administrators can configure the Remote RADIUS authentication
settings required to join the network.
Session Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
timeout
(1-1440):
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication Select the captive portal encryption type here. Options to choose from are
Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP
and POP3.
Type:
Web By default web redirection is disabled. Select enable to activate the website
redirection feature.
Redirection
State:
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
Radius Enter the RADIUS server’s IP address here
Server:
Radius Port: Enter the RADIUS server’s port number here
Radius Port: Enter the RADIUS server’s shared secret here
Remote Select the remote RADIUS server type here.
Radius
Type:
D-Link DAP-2230 User Manual
52
Section 3 - Configuration
LDAP
After selecting LDAP as the Authentication Type, administrators can configure the LDAP authentication settings required to
join the network.
Session Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
timeout
(1-1440):
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication Select the captive portal encryption type here. Options to choose from are
Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP
and POP3.
Type:
Web By default web redirection is disabled. Select enable to activate the website
redirection feature.
Redirection
State:
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
Server: Enter the LDAP server’s IP address or domain name here.
Port: Enter the LDAP server’s port number here.
Authenticate Select the authentication mode here. Options to choose from are Simple andTLS.
Mode:
Username: Enter the LDAP server account’s username here.
Password: Enter the LDAP server account’s password here.
D-Link DAP-2230 User Manual
53
Section 3 - Configuration
Base DN: Enter the administrator’s domain name here
Account Enter the LDAP account attribute string here.
Attribute:
Identity: This string will be used to search for clients.
Enter the identity’s full path string here. Alternatively, select the Auto Copy
checkbox to automatically add the generic full path of the web page in the
identity field.
D-Link DAP-2230 User Manual
54
Section 3 - Configuration
POP3
After selecting POP3 as the Authentication Type, administrators can configure the POP3 authentication settings required to
join the network.
Session Enter the session timeout value here. This value can be from 1 to 1440
minutes. By default, this value is 60 minutes.
timeout
(1-1440):
Band: Select 2.4 Ghz.
SSID Index: Select the SSID for this Authentication.
Authentication Select the captive portal encryption type here. Options to choose from are
Web Redirection, Username/Password, Passcode, Remote RADIUS, LDAP
and POP3.
Type:
Web By default web redirection is disabled. Select enable to activate the website
redirection feature.
Redirection
State:
URL Path : Select whether to use either HTTP or HTTPS here. After selecting either
http:// or https://, enter the URL of the website that will be used in the space
provided.
Server: Enter the POP3 server’s IP address or domain name here.
Port: Enter the POP server’s port number here.
Connection Select the connection type here; either None or SSL/TLS.
Type:
D-Link DAP-2230 User Manual
55
Section 3 - Configuration
Login Page Upload
In this window, users can upload a custom login page picture that will be used by the captive portal feature. Click the Browse
button to navigate to the image file, located on the managing computer and then click the Upload button to initiate the upload.
Upload In this field the path to the image file that will be uploaded will be displayed.
Alternatively, the path can be manually entered here.
picture
from file:
Login Page Select the wireless band and login style that will be used for each SSID.
Style List: Click the Download button to download the login page template file and
Click the Del button to delete the template file.
D-Link DAP-2230 User Manual
56
Section 3 - Configuration
IP Filter
Enter the IP address or network address that will be used in the IP filter rule. For example, an IP address like 192.168.70.66 or a
network address like 192.168.70.0. This IP address or network will be inaccessible to wireless clients on this network.
Wireless Select the wireless band for MAC Bypass.
Band:
IP Address: Enter the IP address or network address.
Subnet Enter the subnet mask of the IP address or networks address.
Mask:
Upload IP To upload an IP filter list file, click Browse and navigate to the IP filter list
Filter File: file saved on your computer, and then click Upload.
Download To download IP Filter list file, click Download and to save the IP Filter list.
IP Filter File:
D-Link DAP-2230 User Manual
57
Section 3 - Configuration
MAC Bypass
The DAP-2230 features a wireless MAC Bypass. Once a MAC address is added to the bypass list, that client will skip the
Captive Portal Authentication process when joining a network. Once an administrator is finished adjusting these settings,
click the Save button to have the changes take effect.
Wireless Select the wireless band for MAC Bypass.
Band:
SSID Index: Select the SSID for MAC Bypass.
MAC Enter each MAC address that you wish to include in your bypass list and then
click Add.
Address:
MAC When a MAC address is entered, it appears in this list. Highlight a MAC address
and click the Delete icon to remove it from this list.
Address
List:
Upload File: To upload a MAC bypass list file, click Browse and navigate to the MAC bypass
list file saved on the managing computer, and then click Upload.
Load MAC Click Download to save the MAC bypass list file.
File to Local
Hard Drive:
D-Link DAP-2230 User Manual
58
Section 3 - Configuration
DHCP Server
Dynamic Pool Settings
The DHCP address pool defines the range of the IP addresses that can be assigned to stations on the network. A Dynamic Pool
allows wireless stations to receive an available IP with lease time control. If needed or required for the network, the DAP-2230
is capable of acting as a DHCP server.
Function Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses
to devices on the network.This protocol simplifies network management and
allows new wireless devices to receive IP addresses automatically without
the need to manually assign new IP addresses. Select Enable to allow the
DAP-2230 to function as a DHCP server.
Enable/
Disable:
IP Assigned Input the first IP address available for assignment on your network.
From:
IP Pool Enter the number of IP addresses available for assignment. IP addresses are
increments of the IP address specified in the “IP Assigned From”field.
Range
(1-254):
Subnet All devices in the network must have the same subnet mask to communicate.
Enter the submask for the network here.
Mask:
Gateway: Enter the IP address of the gateway on the network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for
the wireless network. WINS is a system that determines the IP address of a
network computer that has a dynamically assigned IP address.
DNS: Enter the IP address of the Domain Name System (DNS) server. The DNS
server translates domain names such as www.dlink.com into IP addresses.
Domain Enter the domain name of the network, if applicable. (An example of a
domain name is: www.dlink.com.)
Name:
Lease Time : The lease time is the period of time before the DHCP server will assign new
IP addresses. (60-31536000 sec)
D-Link DAP-2230 User Manual
59
Section 3 - Configuration
Static Pool Setting
A static pool allows specific IP addresses to be reserved to wireless stations.
Function Dynamic Host Configuration Protocol (DHCP) assigns IP addresses to wireless
devices on the network. This protocol simplifies network management and
allows new wireless devices to receive IP addresses automatically without the
need to manually assign IP addresses. Select Enable to allow the DAP-2230
to function as a DHCP server.
Enable/
Disable:
Assigned IP: Use the Static Pool Settings to reserve IP addresses to specific devices.The IP
addresses assigned in the Static Pool list must NOT be in the same IP range
as the Dynamic Pool. After you have assigned a static IP address to a device
via its MAC address, click Save; the device will appear in the Assigned Static
Pool at the bottom of the screen.You can edit or delete the device in this list.
Assigned Enter the MAC address of the device requesting association here.
MAC Address:
Subnet Mask: Define the submask of the IP address specified in the IP Assigned From field.
Gateway: Specify the Gateway address for the wireless network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for
the wireless network. WINS is a system that determines the IP address of
a network computer with a dynamically assigned IP address, if applicable.
DNS: Enter the Domain Name System (DNS) server address for the wireless
network. The DNS server translates domain names such as www.dlink.com
into IP addresses.
Domain Specify the domain name for the network.
Name:
D-Link DAP-2230 User Manual
60
Section 3 - Configuration
Current IP Mapping List
This window displays information about the current assigned DHCP dynamic and static IP address pools. This information is
available when you enable DHCP server on the AP and assign dynamic and static IP address pools.
Current DHCP These are IP address pools the DHCP server has assigned using the dynamic
pool setting.
Dynamic Profile:
Host Name: The host name of a device on the network that is assigned an IP address
from the DHCP dynamic pool.
Binding MAC The MAC address of a device on the network that is assigned an IP address
from the DHCP dynamic pool.
Address:
Assigned IP The current corresponding DHCP-assigned IP address of the device.
Address:
Lease Time: The length of time that the dynamic IP address will be valid.
Current These are the IP address pools of the DHCP server assigned through the
static pool settings.
DHCP Static
Pools:
Host Name: The host name of a device on the network that is assigned an IP address
from the DHCP dynamic pool.
Binding The MAC address of a device on the network that is within the DHCP static
IP address pool.
MAC
Address:
Assigned IP The current corresponding DHCP-assigned static IP address of the device.
Address:
D-Link DAP-2230 User Manual
61
Section 3 - Configuration
Filters
Wireless MAC ACL
Wireless Displays the current wireless band rate.
Band:
Access Select Disable to disable the filters function.
Control List:
MAC Select Accept to accept only those devices with MAC addresses in the Access
Control List. All other devices not on the list will be rejected.
Address:
MAC Select Reject to reject the devices with MAC addresses on the Access Control
List. All other devices not on the list will be accepted.
Address
List:
Upload ACL Enter each MAC address that you wish to include in your filter list, and click
Add.
File:
When you enter a MAC address, it appears in this list. Highlight a MAC address
and click Delete to remove it from this list.
You may create an ACL list and upload it to the access point instead of
manually entering the information. Once created, click the Browse button
and locate your file. Select it and then click Upload.
Download Click Download to export the ACL to a file on your computer.
ACL File:
D-Link DAP-2230 User Manual
62
Section 3 - Configuration
WLAN Partition
Wireless Displays the current wireless band rate.
Band:
Link Select Enable or Disable.
Integrity:
Ethernet The default is Enable. When disabled, all data from the Ethernet port to
associated wireless devices will be blocked. Wireless devices can still send
data to the Ethernet port.
to WLAN
Access:
Internal The default value is Enable, which allows stations to inter-communicate by
connecting to a target AP. When disabled, wireless stations cannot exchange
data through the AP.
Station
Connection:
D-Link DAP-2230 User Manual
63
Section 3 - Configuration
Traffic Control
Uplink/Downlink Settings
The uplink/downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink/uplink
bandwidth rates in Mbits per second. These values are also used in the QoS and Traffic Manager windows. Once the desired
uplink and downlink settings have been selected, click the Save button to let your changes take effect.
Downlink The downlink bandwidth in Mbits per second.
Bandwidth:
Uplink Uplink Bandwidth: The uplink bandwidth in Mbits per second.
Bandwidth:
D-Link DAP-2230 User Manual
64
Section 3 - Configuration
QoS
Quality of Service (QoS) enhances the experience of using a network by prioritizing the traffic of different applications. A QoS
Rule identifies a specific message flow and assigns a priority to that flow. For most applications, the priority classifiers ensure
the right priorities and specific QoS Rules are not required. QoS supports overlapping rules. If more than one rule matches a
specific message flow, the rule with the highest priority will be used.
QoS Enable this option if you want to allow QoS to prioritize your traffic Priority
Classifiers.
(Quality of
Service):
HTTP: Allows the access point to recognize HTTP transfers for many common audio
and video streams and prioritize them above other traffic. Such streams are
frequently used by digital media players.
Automatic: When enabled, this option causes the access point to automatically attempt
to prioritize traffic streams that it does not otherwise recognize, based on
the behavior that the streams exhibit. This acts to de-prioritize streams
that exhibit bulk transfer characteristics, such as file transfers, while leaving
interactive traffic, such as gaming or VoIP, running at a normal priority.
D-Link DAP-2230 User Manual
65
Section 3 - Configuration
Traffic Manager
The traffic manager feature allows users to create traffic management rules that specify how to deal with listed client traffic
and specify downlink/uplink speed for new traffic manager rules. Click the Save button to let your changes take effect.
Traffic Use the drop-down menu to Enable the traffic manager feature.
Manager:
Unlisted Select Deny or Forward to determine how to deal with unlisted client traffic.
Client
Traffic:
Downlink The downlink bandwidth in Mbits per second. This value is entered in the
Uplink/Downlink Setting window.
Bandwidth:
Uplink The uplink bandwidth in Mbits per second.This value is entered in the Uplink/
Downlink Setting window.
Bandwidth:
D-Link DAP-2230 User Manual
66
Section 3 - Configuration
Status
Device Information
This read-only window displays the configuration settings of the DAP-2230, including the firmware version and the device's
MAC address.
D-Link DAP-2230 User Manual
67
Section 3 - Configuration
Client Information
This window displays the wireless client information for clients currently connected to the DAP-2230. The following
information is available for each client communicating with the DAP-2230.
SSID: Displays the SSID of the client.
MAC: Displays the MAC address of the client.
Band: Displays the wireless band that the client is connected to.
Authentication: Displays the type of authentication being used.
Signal: Displays the client's signal strength.
Power Displays the status of the power saving feature.
Saving
Mode:
D-Link DAP-2230 User Manual
68
Section 3 - Configuration
WDS Information
This window displays the Wireless Distribution System information for clients currently connected to the DAP-2230.
The following information is available for each client communicating with the DAP-2230.
Name: Displays the SSID of the client.
MAC: Displays the MAC address of the client.
Authentication: Displays the type of authentication being used.
Signal: Displays the client's signal strength.
Status: Displays the status of the power saving feature.
D-Link DAP-2230 User Manual
69
Section 3 - Configuration
Channel Analyze
Wireless 2.4 Ghz
Band:
Detect: Click the Detect button to scan.
AP List: This will list the transmitting channels and quality.
D-Link DAP-2230 User Manual
70
Section 3 - Configuration
Statistics
Ethernet
This page displays transmitted and received count statistics for packets and bytes.
D-Link DAP-2230 User Manual
71
Section 3 - Configuration
WLAN Traffic
This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors.
D-Link DAP-2230 User Manual
72
Section 3 - Configuration
Log
View Log
The AP’s embedded memory displays system and network messages including a time stamp and message type. The log
information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate
with AP, and web login. The web page holds up to 500 logs.
D-Link DAP-2230 User Manual
73
Section 3 - Configuration
Log Settings
Log Server/ Enter the IP address of the server you would like to send the DAP-2230 log to.
IP Address:
Log Type: Check the box for the type of activity you want to log. There are three types:
System Activity, Wireless Activity, and Notice.
EU directive Enter the EU Directive Log Server IP Address.
Syslog Server
Settings:
Email Check to enable Email notification.
Notification:
Outgoing Mail Select the SMTP server from the drop-down menu.
Server (SMTP):
Authentication: Check to enable authentication.
SSL / TLS: Check to enable SSL/TLS authentication.
From Email Enter the “From”email address.
Address:
To Email Address: Enter the destination email address.
Email Server Enter the Email Server Address.
Address:
SMTP Port: Enter the SMTP port.
Username: Enter your email username.
D-Link DAP-2230 User Manual
74
Section 3 - Configuration
Password: Enter your email password.
Confirm Enter your email password again.
Password:
Schedule: Select when to send the log to your email (in hours).You will receive an email
when the log is full too.
D-Link DAP-2230 User Manual
75
Section 3 - Configuration
Maintenance
Administration Settings
Check one or more of the five main categories to view the various hidden administrator parameters and settings displayed
on the next five pages.
D-Link DAP-2230 User Manual
76
Section 3 - Configuration
Limit Administrator
Each of the five main categories display various hidden administrator parameters and settings.
Limit Check the box provided and the enter the specific VLAN ID that the
administrator will be allowed to log in from.
Administrator
VLAN ID:
Limit Check to enable the Limit Administrator IP address.
Administrator
IP:
IP Range: Enter the IP address range that the administrator will be allowed to log in
from and then click the Add button.
D-Link DAP-2230 User Manual
77
Section 3 - Configuration
System Name Settings
Each of the five main categories display various hidden administrator parameters and settings.
System The name of the device. The default name is D-Link DAP-2230.
Name:
Location The physical location of the device, e.g. 72nd Floor, D-Link HQ.
D-Link DAP-2230 User Manual
78
Section 3 - Configuration
Login Settings
Each of the five main categories display various hidden administrator parameters and settings.
Login Enter a user name. The default is admin.
Name:
Old When changing your password, enter the old password here.
Password:
New When changing your password, enter the new password here.The password
Password: is case-sensitive. “A” is a different character than “a.” The length should be
between 0 and 12 characters.
Confirm Enter the new password a second time for confirmation purposes.
Password:
D-Link DAP-2230 User Manual
79
Section 3 - Configuration
Console Settings
Each of the five main categories display various hidden administrator parameters and settings.
Status: Status is enabled by default. Uncheck the box to disable the console.
Console Select the type of protocol you would like to use, Telnet or SSH.
Protocol:
Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never.
D-Link DAP-2230 User Manual
80
Section 3 - Configuration
SNMP Settings
Each of the five main categories display various hidden administrator parameters and settings.
Status: Check the box to enable the SNMP functions. This option is disabled by
default.
Public Enter the public SNMP community string.
Community
String:
Private Enter the private SNMP community string.
Community
String:
Trap Status: Check the box to enable Trap Status.
Trap Server IP: Enter the Trap Server IP address.
D-Link DAP-2230 User Manual
81
Section 3 - Configuration
Ping Control
Status: Check the box to enable Ping control. Ping works by sending ICMP “echo
request” packets to the target host and listening for ICMP echo response
replies. The default is enabled. If not enabled, the access point will not reply
to pings.
D-Link DAP-2230 User Manual
82
Section 3 - Configuration
Central WiFiManager Settings
The Central WiFiManager section is used to configure and manage a set of APs on the network into a single group in order
to simplify management. Central WiFiManager and AP Array may not be used simultaneously.
Enable Central Select to enable or disable the Central WiFiManager.
WiFiManager:
D-Link DAP-2230 User Manual
83
Section 3 - Configuration
Firmware and SSL Certification Upload
This page allows the user to perform a firmware upgrade. Be sure to check the support.dlink.com website periodically for the
latest firmware updates to keep your product up to date with the latest features.
Upload The current firmware version is displayed above the file location field.
After downloading the most recent version of the firmware for the
DAP-2230 from http://support.dlink.com to your local computer, use the
Browse button to locate the firmware file on your computer. Click Upload to
update the firmware version. Please don’t turn the power off while upgrading.
Firmware
From Local
Hard Drive:
Language You may load a language pack to display the utility in another language.
Click Browse to locate the language pack file on your local computer.
After selecting and opening the file, click Upload to upload the file to the
DAP-2230.
Pack
Upgrade:
Upload SSL Click Browse to locate the SSL Certification file on your local computer.
After selecting and opening the file, click Upload to upload the file to the
DAP-2230.
Certification
From Local
Hard Drive:
D-Link DAP-2230 User Manual
84
Section 3 - Configuration
Configuration File Upload
Upload File: Click the Browse button to locate a previously saved configuration file
on your local computer. After selecting the file, click Upload to apply the
configuration settings to the DAP-2230.
Download Click Download to save the current DAP-2230 configuration to your local
Configuration computer.
File:
D-Link DAP-2230 User Manual
85
Section 3 - Configuration
Time and Date
Current Displays the current time and date settings.
Time:
Enable NTP Check to enable the AP to get system time from an NTP server.
Server:
NTP Server: Enter the NTP server URL or IP address.
Time Zone: Use the drop-down menu to select your correct Time Zone.
Enable Check the box to Enable Daylight Saving Time.
Daylight
Saving:
Daylight Use the drop-down menu to select the correct Daylight Saving offset.
Saving
Dates:
Set the Date You can either manually set the time for your AP here, or you can click the
Copy Your Computer’s Time Settings button to copy the time from the
computer you are using (Make sure that the computer’s time is set correctly).
and Time
Manually:
D-Link DAP-2230 User Manual
86
Section 3 - Configuration
System
System Settings
Restart the Click Restart to restart the DAP-2230.
Device:
Restore Click Restore to restore the DAP-2230 back to factory default settings.
to Factory
Default
Settings:
D-Link DAP-2230 User Manual
87
Section 3 - Configuration
Help
Help: Scroll down the Help page for topics and explanations.
D-Link DAP-2230 User Manual
88
Section 24 - ISnesctualrliatytion
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The DAP-2230 offers
the following types of security:
• WEP (Wired Equivalent Privacy)
• WPA-Personal (Wi-Fi Protected Access)
• WPA-Enterprise (Wi-Fi Protected Access)
D-Link DAP-2230 User Manual
89
Section 24 - ISnesctualrliatytion
What is WEP?
WEP, or Wired Equivalent Privacy, is a Wi-Fi security protocol that encrypts transmitted data. WEP is an older protocol that is
not believed to be as effective anymore.
WEP uses a passphrase or key to authenticate your wireless connection. For 64-Bit WEP, the key is an alpha-numeric password
that is 10 hex digits or an ASCII password consisting of 5 text characters. The hex digits are either numbers from 0 to 9 or
letters from A to F. For 128-Bit WEP, the key is an alpha-numeric password that is 26 hex digits or an ASCII password with 13
text characters.
D-Link DAP-2230 User Manual
90
Section 24 - ISnesctualrliatytion
Configure WEP
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (dlinkap.
local). Click on Setup and then click Wireless Setup on the left side.
2. Next to Security Mode, select WEP.
Note: Choosing WEP means the device will only operate in Legacy wireless mode (802.11B/G) and will not provide 802.11N
performance.
3. Next to WEP Encryption, select 64 Bit(10 hex digits), 64 Bit(5 ASCII characters), 128 Bit(26 hex digits) or 128 Bit(13 ASCII
characters).
4. Next to WEP Key 1, enter a set of digits or letters from A to F, or a string of text.
5. Next to Authentication, select Both or Shared Key.
6. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless
adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on
the access point.
D-Link DAP-2230 User Manual
91
Section 24 - ISnesctualrliatytion
What is WPA?
WPA, orWi-Fi Protected Access, is aWi-Fi standard that was designed to improve the security features ofWEP (Wired Equivalent
Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a
hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered
with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP).
WEP regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is
relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to
ensure that only authorized network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key
entered on your wireless bridge or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more
secure public key encryption system to ensure that only authorized network users can access the network.
D-Link DAP-2230 User Manual
92
Section 24 - ISnesctualrliatytion
Configure WPA/WPA2 Personal
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (dlinkap.
local). Click on Setup and then click Wireless Setup on the left side.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto(WPA or WPA2), WPA2 only, or WPA only.
4. Next to Cipher Type, select TKIP, AES, or TKIP and AES.
5. Next to Pre-Shared Key, enter a key.The key is entered as a passphrase in ASCII format at both ends of the wireless connection.
The passphrase must be between 8-63 characters.
6. Click Save Settings at the top of the window to save your settings. If you are configuring the access point with a wireless
adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on
the access point.
D-Link DAP-2230 User Manual
93
Section 24 - ISnesctualrliatytion
Configure WPA/WPA2 Enterprise
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (dlinkap.
local). Click on Setup and then click Wireless Setup on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto(WPA or WPA2), WPA2 only, or WPA only.
4. Next to Cipher Mode, select TKIP, AES, or Auto.
5. Next to RADIUS Server IP Address, enter the IP Address of your RADIUS server.
6. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.
7. Next to RADIUS Server Shared Secret, enter the security key.
8. Click Advanced to enter settings for a secondary RADIUS Server.
9. Click Save Settings to save your settings.
D-Link DAP-2230 User Manual
94
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless
adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows®
XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on
the center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View Available
Wireless Networks.
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal, but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DAP-2230 User Manual
95
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WEP key being used.
1. Open the Windows® XP Wireless Utility by right-clicking
on the wireless computer icon in your system tray
(lower-right corner of screen). SelectView AvailableWireless
Networks.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
D-Link DAP-2230 User Manual
96
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter theWPA-PSK
passphrase and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct. The
WPA-PSK passphrase must be exactly the same as on the wireless access
point.
D-Link DAP-2230 User Manual
97
Section 5 - Connecting to a Wireless Network
Using Windows Vista®
Windows Vista® users may use the convenient, built-in wireless utility. Follow these instructions:
From the Start menu, go to Control Panel, and then click on
Network and Sharing Center.
The utility will display any available wireless networks in your
area. Click on a network (displayed using the SSID) under Select a
network to connect to and then click the Connect button.
D-Link DAP-2230 User Manual
98
Section 5 - Connecting to a Wireless Network
Click Connect Anyway to continue.
The utility will display the following window to indicate a
connection is being made.
The final window indicates the establishment of a successful
connection.
The next two pages display the windows used to connect to either
a WEP or a WPA-PSK wireless network.
D-Link DAP-2230 User Manual
99
Section 5 - Connecting to a Wireless Network
Configure WPA-PSK
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WEP key being used.
Click on a network (displayed using the SSID) using WPA-PSK under
Select a network to connect to and then click the Connect button.
Enter the appropriate security key or passphrase in the field
provided and then click the Connect button.
D-Link DAP-2230 User Manual
100
Section 5 - Connecting to a Wireless Network
Using Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your area.
D-Link DAP-2230 User Manual
101
Section 5 - Connecting to a Wireless Network
3. Highlight the wireless network (SSID) you would like to connect to
and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
D-Link DAP-2230 User Manual
102
Section 5 - Connecting to a Wireless Network
5. Enter the same security key or passphrase that is on your router
and click Connect. You can also connect by pushing the WPS
button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct.
The key or passphrase must be exactly the same as on the wireless
router.
D-Link DAP-2230 User Manual
103
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DAP-2230. Read the
following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different
operating system, the screenshots on your computer will look similar to the following examples.)
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link access point (dlinkapwxyz.local for example, with wxyz the last four digits of the
AP’s MAC Address), you are not connecting to a website on the Internet or have to be connected to the Internet. The device
has the utility built-in to the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer® 7 and higher
- Mozilla Firefox 12.0 and higher
- Google™ Chrome 20.0 and higher
- Apple Safari 4 and higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different
cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on.
• Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate,
Norton Personal Firewall, andWindows® XP firewall may block access to the configuration pages. Check the help files included
with your firewall software for more information on disabling or configuring it.
D-Link DAP-2230 User Manual
104
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address
bar. This should open the login page for your the web management.
• If you still cannot access the configuration, unplug the power to the access point for 10 seconds and plug back in. Wait about
30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your access point. Unfortunately this process will change all your settings back to
the factory defaults.
To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a
paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process.
Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is
Admin and leave the password box empty.
D-Link DAP-2230 User Manual
105
Section 6 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my access point?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail,
we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
Note: AOL DSL+ users must use MTU of 1400.
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be
another computer, or a URL.
• Click on Start and then click Run.
•Windows® 95, 98, and Me users type in command (Windows® NT, 2000, and XP users type in cmd) and press Enter
(or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
D-Link DAP-2230 User Manual
106
Section 6 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented
packet.Take that value and add 28 to the value to account for the variousTCP/IP headers. For example, lets say that 1452 was the
proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480).
Once you find your MTU, you can now configure your access point with the proper MTU size.
To change the MTU rate on your access point follow the steps below:
• Open your browser, enter the IP address of your access point (192.168.0.50) and click OK.
• Enter your username (Admin) and password (blank by default). Click OK to enter the web configuration page
for the device.
• Click on Setup and then click Manual Configure.
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments
of ten.
D-Link DAP-2230 User Manual
107
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able
to enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of
wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops
and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently.
Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order
to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Access point is a device used to
provide this link.
D-Link DAP-2230 User Manual
108
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office.
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link
delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network.You must be within the wireless network range area
to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has
a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point
as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles
to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and
many other outdoor venues.
D-Link DAP-2230 User Manual
109
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to
30 feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Who uses wireless?
Wireless technology has become so popular in recent years that almost everyone is using it, whether it’s for home, office,
business, D-Link has a wireless solution for it.
Home
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
D-Link DAP-2230 User Manual
110
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations
like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your access point or Access Point
Make sure you place the bridge/access point in a centralized location within your network for the best performance. Try to
place the bridge/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have
a two-story home, you may need a Repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, wireless speakers, and televisions as far away as possible from
the bridge/access point. This would significantly reduce any interference that the appliances might cause since they operate
on same frequency.
D-Link DAP-2230 User Manual
111
Appendix A - Wireless Basics
Security
Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning
on the WPA or WEP security feature on the access point. Refer to product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless bridge.
• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network
adapters on each computer, such as two or more wireless network Cardbus adapters.
An Infrastructure network contains an Access Point or wireless bridge. All the wireless devices, or clients, will connect to the
wireless bridge or access point.
An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc
mode to communicate.
D-Link DAP-2230 User Manual
112
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e.
wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista®users type cmd in the Start Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router.
Some firewall software programs may block a DHCP
request on newly installed adapters.
D-Link DAP-2230 User Manual
113
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 -
Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adapter
Setting.
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network
Connections.
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not in
use on the network. Set Default Gateway the same as the LAN IP address of your router
(192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DAP-2230 User Manual
114
Appendix C - Technical Specifications
Technical Specifications
DAP-2230
IEEE 802.11n/g/b
IEEE 802.3
IEEE 802.3u
IEEE 802.3af
ƒ
ƒ
Standards
ƒ
ƒ
SNMP v1, v2c, and v3
Traffic Control
D-Link Central WiFiManager
AP Array
ƒ
ƒ
ƒ
ƒ
Web Browser Interface
HTTP, Secure HTTP (HTTPS)
Telnet, Secure Telnet (SSH)
ƒ
ƒ
ƒ
Network Management
Functionality
WPA-Personal & Enterprise
WPA2-Personal & Enterprise
WEP 64/128 bit Encryption
802.1X
SSID Broadcast disable
MAC Address Control
Network Access Protection (NAP)
Internal Radius Server
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Security
Access Point
Wireless Distribution System
Wireless Distribution System with AP
Wireless Client
ƒ
ƒ
ƒ
ƒ
Operational Modes
LEDs
Power
ƒ
ƒ
ƒ
ƒ
ƒ
802.11b/g/n wireless
Built-in 3 dBi antenna
2.4 GHz to 2.4835 GHz
29.84dBm (964mW)
One 10/100 LAN port (PoE support)
ƒ
Device Interfaces
Antenna
Wireless Frequency
Maximum Transmit Power Ouput1
48 VDC 0.5A, or 802.3af PoE compliant
12 VDC 1 A auxillary power input
ƒ
ƒ
Operating voltage
Physical
Maximum Power Consumption
16.8 watts
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Dimensions (L x W x H)
Weight
0 to 40 °C (32 to 104 °F)
-20 to 65 °C (-4 to 149 °F)
0 to 90% (non-condensing)
5 to 95% (non-condensing)
129 x 129 x 29 mm (5.08 x 5.08 x 1.14 inches)
101.4 grams (3.56 ounces)
213.6 grams (7.5 ounces) with wall plate
ƒ
1 Range will vary depending on country’s maximum transmit power output regulation. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications.
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
D-Link DAP-2230 User Manual
115
Appendix C - Technical Specifications
FCC
IC
CE
ƒ
ƒ
ƒ
UL
ƒ
ƒ
Safety & Emissions
Certifications
Wi-Fi Certified
D-Link DAP-2230 User Manual
116
Appendix D - Antenna Pattern
Antenna Pattern
Antenna Pattern
Orientation
H-Plane
E-Plane
Ceiling Mounted
Z
Y
X
Floor
(H-Plane)
Wall Mounted
Z
Y
X
Floor
(H-Plane)
D-Link DAP-2230 User Manual
117
Appendix E - Regulatory Information
Regulatory Information
Caution: Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adapter first
before connecting it to a power outlet.
Federal Communication Commission Interference Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipmentgenerates, usesandcanradiateradiofrequencyenergyand, ifnotinstalledandusedinaccordancewiththeinstructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except
in accordance with FCC multi-transmitter product procedures.
D-Link DAP-2230 User Manual
118
Appendix E - Regulatory Information
Note:
The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all Wi-Fi
product marketed in US must fixed to US operation channels only.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20 cm between the radiator and your body.
Industry Canada Statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the radiator & your body.
Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre
corps.
D-Link DAP-2230 User Manual
119
Appendix E - Regulatory Information
European Union:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. For more information, please refer
to the Declaration of Conformity.
Notice of Wireless Radio LAN Usage in The European Community:
• At the time of writing this addendum, some countries such as Italy, Greece, Portugal and Spain have not allowed operation
of radio devices in the 5 Ghz bands, although operation of 2.4 Ghz radio devices are allowed. Please check with your local
authority to confirm.
• This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz
band to reduce the potential for interference.
• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA
countries, except in France where restrictive use applies. This device may not be used for setting up outdoor radio links in
France and in some areas the RF output power may be limited to 10 mW EIR P in the frequency range of 2454 –2483.5 MHz.
For detailed information the end-user should contact the national spectrum authority in France.
This equipment may be operated in AL, AD , BE , BG, DK, DE , FI, FR, GR, GW, IS, IT , HR , LI, LU, MT , MK, MD , MC , NL, NO, AT,
OL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Usage Notes:
• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be
applied on the products according to the country where the equipment will be deployed.
• This device is restricted from functioning in Ad-hoc mode while operating in 5 Ghz. Ad-hoc mode is direct peer-to-peer
communication between two client devices without an Access Point.
• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required
when operating in 5 Ghz within the EU.
D-Link DAP-2230 User Manual
120
Appendix E - Regulatory Information
2.4 GHz Wireless Frequency and Channel Operation in EEC Countries:
Region
Frequency Band
Max output power (EIRP)
Metropolitan
2400 - 2454 MHz
100 mW
Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte
2454 - 2483.5 MHz
100 mW indoor, 10 mW outdoor
Reunion et Guyane
2400 - 2483.5 MHz
2420 - 2483.5 MHz
100 mW
100 mW
Rest of EU community
R&TTE 1999/5/EC
WLAN 2.4 - 2.4835 GHz
IEEE 802.11b/g/n
Spectrum Regulation
MHz, Europa (ETSI)
max. EIRP Innenbereich
max. EIRP Außenbereich
100 mW
Europa
2400 - 2483,5 MHz
2400 - 2454 MHz
2454 - 2483,5 MHz
100 mW
100 mW
100 mW
100 mW
Frankreich
10 mW
D-Link DAP-2230 User Manual
121
Appendix E - Regulatory Information
European Community Declaration of Conformity:
D-Link tímto prohlašuje, že tento DAP-2230 je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1999/5/ES.
Česky [Czech]
Dansk [Danish]
Undertegnede D-Link erklærer herved, at følgende udstyr DAP-2230 overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt D-Link, dass sich das Gerät DAP-2230 in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Deutsch [German]
Käesolevaga kinnitab D-Link seadme DAP-2230 vastavust direktiivi 1999/5/EÜ põhinõuetele
ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Eesti [Estonian]
English
Hereby, D-Link, declares that this DAP-2230 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Por medio de la presente D-Link declara que el DAP-2230 cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Español [Spanish]
Ελληνική [Greek]
Français [French]
Italiano [Italian]
Latviski [Latvian]
Lietuvių [Lithuanian]
Nederlands [Dutch]
ΜΕΤΗΝ ΠΑΡΟΥΣΑ D-Link ΔΗΛΩΝΕΙ ΟΤΙ DAP-2230 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣΤΙΣ ΟΥΣΙΩΔΕΙΣ
ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente D-Link déclare que l'appareil DAP-2230 est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Con la presente D-Link dichiara che questo DAP-2230 è conforme ai requisiti essenziali ed
alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo D-Link deklarē, ka DAP-2230 atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
citiem ar to saistītajiem noteikumiem.
Šiuo D-Link deklaruoja, kad šis DAP-2230 atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Hierbij verklaart D-Link dat het toestel DAP-2230 in overeenstemming is met de essentiële
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
D-Link DAP-2230 User Manual
122
Appendix E - Regulatory Information
Hawnhekk, D-Link, jiddikjara li dan DAP-2230 jikkonforma mal-ħtiġijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Malti [Maltese]
Alulírott, D-Link nyilatkozom, hogy a DAP-2230 megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Magyar [Hungarian]
Polski [Polish]
Niniejszym D-Link oświadcza, że DAP-2230 jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
D-Link declara que este DAP-2230 está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Português [Portuguese]
Slovensko [Slovenian]
Slovensky [Slovak]
D-Link izjavlja, da je ta DAP-2230 v skladu z bistvenimi zahtevami in ostalimi relevantnimi
določili direktive 1999/5/ES.
D-Link týmto vyhlasuje, že DAP-2230 spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
D-Link vakuuttaa täten että DAP-2230 tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Suomi [Finnish]
Warning Statement:
The power outlet should be near the device and easily accessible.
D-Link DAP-2230 User Manual
123
Appendix E - Regulatory Information
Safety Instructions
Please adhere to the following safety guidelines to help ensure your own personal safety and protect your system from potential
damage. Any acts taken that are inconsistent with ordinary use of the product, including improper testing, etc., and those not
expressly approved by D-Link may result in the loss of product warranty.
Unless expressly approved by an authorized representative of D-Link in writing, you may not and may not permit others to:
• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from
the device or from any other information provided by D-Link, except to the extent that this restriction is expressly prohibited
by local law.
• Modify or alter the device.
• Remove from the device any product identification or other notices, including copyright notices and patent markings, if any.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the device and other equipment, observe the following
precautions:
Power Sources
• Observe and follow service markings.
• Do not push any objects into the openings of your device unless consistent with the authorized operation of the device.
Doing so can cause a fire or an electrical shock by shorting out interior components.
• The powering of this device must adhere to the power specifications indicated for this product.
• Do not overload wall outlets and/or extension cords as this will increase the risk of fire or electrical shock.
• Do not rest anything on the power cord or on the device (unless the device is made and expressly approved as suitable for
stacking).
• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be sure
that nothing rests on any cables.
• Operate the device only from the type of external power source indicated on the electrical ratings label.
• To help avoid damaging your device, be sure the voltage selection switch (if provided) on the power supply is set to match
the power available at your location.
• Also be sure that attached devices are electrically rated to operate with the power available in your location.
• Use only approved power cable(s). If you have not been provided a power cable for your device or for any AC -powered option
intended for your device, purchase a power cable that is approved for use in your country and is suitable for use with your
device. The power cable must be rated for the device and for the voltage and current marked on the device's electrical ratings
label. The voltage and current rating of the cable should be greater than the ratings marked on the device.
D-Link DAP-2230 User Manual
124
Appendix E - Regulatory Information
• To help prevent an electrical shock, plug the device and peripheral power cables into properly grounded electrical outlets.
These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the
grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.
• Observe extension cable and power strip ratings. Ensure that the total ampere rating of all products plugged into the extension
cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip.
• To help protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line
conditioner, or uninterruptible power supply (UPS).
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always
follow your local/national wiring rules.
•When connecting or disconnecting power to hot-pluggable power supplies, if offered with your device, observe the following
guidelines.
• Install the power supply before connecting the power cable to the power supply.
• Unplug the power cable before removing the power supply.
• If the system has multiple sources of power, disconnect power from the device by unplugging all power cables from the
power supplies.
Servicing/Disassembling
• Do not service any product except as expressly set forth in your system documentation.
• Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to an electrical
shock. Only a trained service technician should service components inside these compartments.
• To reduce the risk of electrical shock, never disassemble this device. None of its internal parts are user-replaceable; therefore,
there is no reason to access the interior.
• Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device
gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.
• Use the device only with approved equipment.
• Move products with care; ensure that all casters and/or stabilizers are firmly connected to the system. Avoid sudden stops
and uneven surfaces.
Environment
• Do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).
• Do not use this device in areas with high humidity.
D-Link DAP-2230 User Manual
125
Appendix E - Regulatory Information
• This device must not be subjected to water or condensation.
• Keep your device away from radiators and heat sources. Also, do not block cooling vents.
Cleaning
• Always unplug the power before cleaning this device.
• Do not use liquid or aerosol cleaners of any kind. Use only compressed air that is recommended for electronic devices.
• Use a dry cloth for cleaning.
Protecting Against Electrostatic Discharge
Static electricity can harm delicate components inside your system. To prevent static damage, discharge static electricity from
your body before you touch any of the electronic components, such as the microprocessor. You can do so by periodically
touching an unpainted metal surface on the chassis.
You can also take the following steps to help prevent damage from electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its shipping carton, do not remove the component from the antistatic
packing material until you are ready to install the component in your system. Just before unwrapping the antistatic packaging,
be sure to discharge static electricity from your body.
2. When transporting a sensitive component, first place it in an antistatic container or packaging.
3. Handle all sensitive components in a static-safe area. If possible, use antistatic floor pads, workbench pads, and an antistatic
grounding strap.
Environmental
This product may contain a battery. Recycle or dispose of batteries in accordance with the battery manufacturer's
instructions and local/national disposal and recycling regulations. For more information, please refer to the warranty guide.
D-Link DAP-2230 User Manual
126
Appendix E - Regulatory Information
Disposing of and Recycling Your Product
ENGLISH
This symbol on the product or packaging means that according to local laws and regulations this product
should be not be disposed of in the household waste but sent for recycling. Please take it to a collection point
designated by your local authorities once it has reached the end of its life, some will accept products for free.
By recycling the product and its packaging in this manner you help to conserve the environment and protect
human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the
environment. To minimise this impact D-Link designs and builds its products to be as environmentally friendly as possible,
by using recyclable, low toxic materials in both products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you
will help to save energy and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com
DEUTSCH DE
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender
örtlicher Gesetze und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer
Wiederverwertung zuzuführen ist. Bringen Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend
amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende seiner Nutzungsdauer erreicht hat. Für
die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf diese Weise
durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die
menschliche Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und
fühlt sich verpflichtet, diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit
dem Ziel größtmöglicher Umweltfreundlichkeit her und verwendet wiederverwertbare, schadstoffarme Materialien bei
Produktherstellung und Verpackung.
D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf
D-Link DAP-2230 User Manual
127
Appendix E - Regulatory Information
diese Weise helfen Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende
Informationen im Internet unter www.dlinkgreen.com.
FRANÇAIS FR
Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations
locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un
point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement. En
recyclant le produit et son emballage de cette manière, vous aidez à préserver l’environnement et à protéger la
santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons
à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en
utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez
ainsi des économies d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.
com
ESPAÑOL ES
Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este
producto no se debe desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida
designado por las autoridades locales una vez que ha llegado al fin de su vida útil; algunos de ellos aceptan
recogerlos de forma gratuita. Al reciclar el producto y su embalaje de esta forma, contribuye a preservar el
medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades
y nuestros productos en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean
lo más ecológicos posible, utilizando materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link DAP-2230 User Manual
128
Appendix E - Regulatory Information
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a
ahorrar energía y a reducir las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com
ITALIANO IT
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi
e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una
volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali.
Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare. Scegliendo di riciclare il prodotto
e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre
al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente,
utilizzando materiali riciclabili a basso tasso di tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo
modo si contribuirà a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.
dlinkgreen.com
NEDERLANDS
NL
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet
mag worden weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra
het product het einde van de levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe
werd aangeduid door uw plaatselijke autoriteiten, sommige autoriteiten accepteren producten zonder dat u
hiervoor dient te betalen.
Door het product en de verpakking op deze manier te recyclen helpt u het milieu en de gezondheid van de
mens te beschermen.
D-Link DAP-2230 User Manual
129
Appendix E - Regulatory Information
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze
impact te beperken, ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van
recycleerbare producten met lage toxiciteit in product en verpakking.
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door
dit te doen bespaart u energie en beperkt u de CO2-emissies.
Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en
verpakkingen
POLSKI
PL
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi
przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz
należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do
tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki
wskazanego przez lokalne władze.
Poprzez proces recyklingu i dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą
Państwo chronić środowisko naturalne i dbać o ludzkie zdrowie.
D-Link i środowisko
W D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu
naszych działań i produktów na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D-Link konstruuje
i wytwarza swoje produkty w taki sposób, aby były one jak najbardziej przyjazne środowisku, stosując do tych celów
materiały nadające się do powtórnego wykorzystania, charakteryzujące się małą toksycznością zarówno w przypadku
samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one
wykorzystywane. Postępując w ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
"Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną
Internetową www.dlinkgreen.com."
D-Link DAP-2230 User Manual
130
Appendix E - Regulatory Information
ČESKY
CZ
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí
vyhazovat do komunálního odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné
místo určené místními úřady k tomuto účelu. Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku
i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
"Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci
těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme
recyklovatelné a nízkotoxické materiály."
"Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je
nepoužíváte. Pomůžete tak šetřit energii a snížit emise CO2."
Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
MAGYAR HU
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak
megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra
kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt
gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és a csomagolás újrahasznosításával
segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak
csökkentésére. Az ezen hatás csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt
azáltal, hogy újrahasznosítható, alacsony károsanyag-tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a
tápforrásból, ha nem használja azokat. Ezzel segít az energia megtakarításában és a széndioxid kibocsátásának
csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.
D-Link DAP-2230 User Manual
131
Appendix E - Regulatory Information
NORSK
NO
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter
ikke skal kastes sammen med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et
innsamlingssted anvist av lokale myndigheter når det er kommet til slutten av levetiden. Noen steder aksepteres
produkter uten avgift. Ved på denne måten å gjenvinne produktet og forpakningen hjelper du å verne miljøet
og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet.
For å minimalisere denne innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke
resirkulerbare, lav-toksiske materialer både i produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare
energi og å redusere CO2-utslipp.
"For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com"
DANSK
DK
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må
bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted
som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet
blive modtaget gratis. Ved at indlevere produktet og dets emballage til genbrug på denne måde bidrager du til
at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på
miljøet. For at minimere denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som
muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du
til at spare energi og reducere CO2-udledningerne.
Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com
D-Link DAP-2230 User Manual
132
Appendix E - Regulatory Information
SUOMI
FI
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä
tuotetta ei pidä hävittää yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote
on elinkaarensa päässä, toimita se lähimpään viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä
käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta
ympäristölle mahdollisesti aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee
ja valmistaa tuotteensa mahdollisimman ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia
aineita sisältäviä materiaaleja sekä tuotteissaan että niiden pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin
autat säästämään energiaa ja vähentämään hiilidioksiidipäästöjä.
"Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com"
SVENSKA SE
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte
skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet
utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna
produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och
produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska
vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och
förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att
göra detta hjälper du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com
D-Link DAP-2230 User Manual
133
Appendix E - Regulatory Information
PORTUGUÊS
PT
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais,
este produto não deverá ser eliminado juntamente com o lixo doméstico mas enviado para a reciclagem.
Transporte-o para um ponto de recolha designado pelas suas autoridades locais quando este tiver atingido o
fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao reciclar o produto e respectiva
embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos
possam ter no ambiente. Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam
o mais inofensivos para o ambiente possível, utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas
embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção
ajudará a poupar energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com
D-Link DAP-2230 User Manual
134
|
