CANON SELPHY CP720 User Manual

Unpack

Prepare

p. 2

p. 3

p. 5

Printing Guide

Basic to Advanced

Printing

Thank you for purchasing a SELPHY Compact

Photo Printer. You can start to print immediately

with the items in your package. There are three

easy steps: Unpack the contents, prepare them

and print.

Enjoy a Multitude of

Functions

p. 8

Installing the PDF

Manual

p. 11

Boundless

Possibilities

p. 13

Troubleshooting

p. 16

ENGLISH

Prepare

In this step you will insert the ink and paper cassettes to prepare for printing.

Although these illustrations show the CP730 model, the procedures apply

equally to the CP720 model.

1. Install the ink cassette.

Open the ink cassette

compartment cover on the

printer.

Insert the starter ink cassette into

the printer until it clicks firmly into

place and close the cover.

2. Place paper into the paper cassette.

Slide the lid of the paper cassette

and open it upward, as shown.

Next, place the paper in the

cassette with the shiny side

upward. Try not to touch the

shiny side of the paper.

Close the lid but do not slide it

forward. You should see a portion

of the paper through the opening.

Align the paper

beneath the tabs.

3. Install the paper cassette into the printer.

Open the paper cassette slot

cover.

Insert the paper cassette all the

way into its slot.

Paper visible through

opening

Hold it here.

4. Attach the power cord.

Plug the power cord into the

compact power adapter and then

into a power outlet.

Attach the compact power adapter

connector to the printer's DC IN

terminal.

Mismatching Paper Stocks, Paper Cassettes and Ink

Cassettes

Caution!

The printer will not print correctly if

you mismatch paper stocks to paper

cassettes or ink cassettes. The

matching paper size is written where

shown on paper cassettes and ink

cassettes.

Wait!

Do not connect the printer to the computer until after you have installed

the printer driver.

No. Always use the genuine Canon brand "Color

Ink/Paper Sets" included in SELPHY-specific

paper sets.

Can I Use Standard

Printer Paper and

Postcards?

In this step you will insert a memory card with images into the printer, and

print.

1. Press the power button until the start-up image (shown right)

displays on the LCD monitor.

Press until the image

appears.

2. Insert the memory card into the appropriate card slot.

With the label side upward, insert the memory card fully.

Memory Stick PRO Duo

Memory Stick Duo

Memory Stick PRO

Memory Stick

SD Memory Card

SDHC Memory Card

miniSD Card

miniSDHC Card

MultiMediaCard

RS-MMC

CompactFlash Card

Microdrive

xD-Picture Card (a separate adapter*

is required)

* Purchase a CompactFlash Card

Adapter for xD-Picture Cards

separately.

3. Press

to select an image to print.

CP730

CP720

4. Press [DATE] and select whether or not to include the

shooting date.

When the bottom right of the monitor shows

, the date does

not print. When it shows

day/year] format.

, the date will print in the [month/

5. Press

The printer will start. The paper will pass in and out four times. Do not pull

on or force the paper during this process.

After confirming that the image has printed, remove the memory card.

To turn the printer off, press the power button again for a moment.

It can make five prints, the same

How many prints

number as the supplied starter

can the starter ink

paper sheets. A symbol similar to the

cassette print?

one at the right will appear on the

LCD monitor when the ink runs out. Please

exchange the ink cassette with a new one.

Note that dye-sublimation thermal transfer

photo printers such as the SELPHY series cannot

print any more prints than those noted on the

color ink/paper set packages. They use a

technology very different from that used in ink

jet printers.

You Can Also Connect the Camera to Print

If your Canon digital camera has a

(Print/Share) button on it, you

can connect the camera to the printer for easy printing. If your camera

does not have a

(Print/Share) button, please check its user manual.

1. Pull the cable out of the printer and attach it to the camera's DIGITAL

terminal.

If the connector on the cable does not fit your camera's terminal, use

the USB cable supplied with your camera.

Extends up to 30 cm (12 in.).

DIGITAL Terminal

Confirm that all memory

cards have been removed

from the printer.

2. Press the power button until the start-up image displays on the LCD

monitor.

3. Select an image on the camera's LCD monitor and press the

(Print/Share) button.

Other camera brands that are PictBridge compliant can also be connected

for direct printing.

Enjoy a

Multitudeof

Functions

This section introduces the

numerous functions that make

printing fun.

MODE Button

This button sets the printing

mode.

Single

Prints one copy of the

displayed image.

Select

Prints the specified

number of copies of the

selected images.

LAYOUT Button

This button sets the print layout.

Printing Using the

Select Mode

Borderless

Bordered

1. Press

select an image to

print.

2. Select the number

of prints using the

button.

2 Images

4 Images

3. Repeat Steps 1 and 2

as required for

successive images.

4. When you finish,

press

All

Prints one copy of each

image.

8 Images

Index

DPOF

xxxxxx

Prints according to the

DPOF settings set using

the camera. See the user

guide included with

your camera for

instructions regarding

DPOF settings.

xxxxxx

The image number

also prints.

LCD Monitor

It displays the memory card images

and current settings information.

Power Button

CP730

Selected Image

Image Number

Print Image

Number of

Prints of

DISP. (Display) Button

Press this button to display

the image at a larger size.

Press it again to restore it to

its original size.

Selected Image

Total Number of

Prints

Installed Ink

Cassette Type

My Colors

Date Imprint

Printing

Mode

DATE Button

Print Layout

This button sets the date

imprint that can be added to

images.

CP720

Selected Image

Image Number

Print Image

No Date

Number of Prints of

Selected Image

Year/Month/Day

Month/Day/Year

Day/Month/Year

Total Number of Print

Date Imprint

Installed Ink Cassette Type

Printing

Mode

Print Layout

Print/Stop Button

Press this button to start

printing. Pressing this button

while printing is in progress

stops it. It still consumes one

print's worth of ink even

when printing is stopped.

TRIM. Button (CP730 only)

This button starts the trimming mode, which lets

you enlarge a portion of an image for printing.

How to Select the Trimming Area

1. Press the TRIM. button, followed by the

DISP. button.

2. Press the

and

buttons to adjust the

and buttons

print area size, and the

to rotate the print area frame 90 degrees.

3. Press the DISP. button again, followed by

the

and

buttons to move the

print area as desired.

4. Press the TRIM. button to put the settings

into effect.

EFFECT Button (CP730 only)

This button sets the My Colors function.

Off

B/W

Sepia

Vivid

Neutral

Installing

the PDF

Manual

The Printer User Guide (PDF manual) explains information such as details

about the printer, troubleshooting suggestions and instructions for

connecting the printer to a computer. Use the following procedures to install

the Printer User Guide on your computer.

Windows

1. Place the supplied CD-ROM into the CD-ROM drive.

If the CD-ROM is already in the drive and the panel shown below has not

opened, take the CD-ROM out and re-insert it into the drive.

2. Click [Custom Installation] in

the Application Software/User

Guide section, followed by

[OK].

3. Select [Printer User Guide] and click [Next]. Follow the

onscreen instructions.

Remove the CD-ROM when the installation is complete.

Macintosh

1. Place the supplied CD-ROM into the CD-ROM drive and

double-click the

window.

(CPSD Installer) icon in the CD-ROM

2. Click [Install] in the Application

Software/User Guide section,

followed by [Custom

Installation] and [Next].

3. Click [Agree], followed by [Next].

4. Select [Printer User Guide] and click [Next]. Follow the

onscreen instructions.

Remove the CD-ROM when the installation is complete.

• The Printer User Guide is also installed by selecting the [Easy Installation]

option.

• The Adobe Reader or Adobe Acrobat Reader program is required to view

the Printer User Guide.

Boundless

Possibilities

Supplied Items

Depending on the region, L size items may be supplied with the printer.

Postcard Size Paper Cassette

Postcard Size Paper Package (5 sheets)

Ink Cassette for Postcard Size

Separately Sold Items*

*Some items are not sold in some regions.

"Color Ink/Paper Set KP-36IP" Postcard Size 36-Sheet Package

"Color Ink/Paper Set KP-72IP" Postcard Size 72-Sheet Package

"Color Ink/Paper Set KP-108IP" Postcard Size 108-Sheet Package

"Color Ink/Paper Set KC-36IP" Card Size 36-Sheet Package

"Color Ink/Paper Set KW-24IP" Wide Size 24-Sheet Package

"Color Ink/Full-Sized Label Set KC-18IF" Card Size 18-Sheet Package

"Color Ink/Label Set KC-18IL" Card Size 18-Sheet Package

"Color Ink/Paper Set KL-36IP" L Size 36-Sheet Package

Postcard Size Paper Cassette (PCP-CP100)

Card Size Paper Cassette (PCC-CP100)

Wide Size Paper Cassette (PCW-CP100)

L Size Paper Cassette (PCL-CP100)

Use Label Sheets to Make

Organizing, Arranging and

Classifying Fun

Required Items:

Present Your Memories

Attractively in Photo Frames or

Albums or create Postcards with

Postcard Size Sheets

Required Items:

(Add Options

)

Create Unique Stickers with

8-Label Sheets

Required Items:

The CP730 can print without a cable connection if you have a mobile

phone that supports the IrDA (infrared data transmission) protocol. You

can also print wirelessly with the Bluetooth Unit (BU-20) if you use mobile

phones and PDAs that support the Bluetooth protocol.

Bluetooth Unit

(sold separately)

IrDA Sensor

Carry Your Favorite Photos

Everywhere with Card Size Sheets

Required Items:

Use the Wide Size Sheets for the

Grand Appeal of Panorama Shots

Required Items:

Use the CP730's Separately Sold Battery Pack to Print Postcards

on Location

1. Open the battery cover.

2. Attach the battery.

3. Charge the battery (approx. 2.5 hours from a depleted to fully charged

state).

To a power outlet.

Troubleshooting

Solutions for when you cannot print as expected, or think the printer is not

operating properly.

Did you press and hold the power button until

Power will not turn

on…

the start-up image displayed? Check the

compact power adapter, the main printer unit

and the power cord to ensure that they are

correctly connected.

Have you run out of ink sheets? Replace the ink

cassette (the starter ink cassette can be used to

print 5 sheets).

Cannot print…

Some ink may be consumed even if you don't

print if you tug on the ink sheets or needlessly

turn the power on/off repeatedly. Also, the ink

can be wasted if you take out the ink cassette

when the paper sheets run out during a

multiple print run. Remove the paper cassette

and replenish the paper without removing the

ink cassettes.

I have extra paper

but the ink ran

out…

Some categories cannot be selected or are

disabled with certain combinations of print

mode, print layout, date imprint and print

numbers.

Cannot set the

mode, print layout,

date imprint and

print number as

expected…

Did you set SELPHY-specific paper in the cassette

with the shiny side upward as required? If the

ink sheet becomes dusty, blow it clean with a

blower brush or similar device. If narrow stripes

appear, remove the ink cassette and use the

supplied cleaner two or three times to clean the

interior of the printer.

Cannot print

cleanly…

Printer power

button is blinking

red…

Try turning the power off and on.

Confirm that the memory card is inserted all the

way in. Also note that images may not be

detected in folders not based on standard file

and folder conventions for digital cameras, the

Design rule for Camera File system (Exif

compliant).

Images will not

appear even with a

memory card

inserted…

Experiencing

numerous paper

jams…

Place 18 or fewer sheets of paper in the paper

cassette (12 or fewer for Wide Size sheets).

Moreover, do not place more than 10 sheets of

printed paper on top of the paper cassette.

List of Error Symbols

Cannot display image

No images on memory card

Cannot read image

No paper

Ink cassette error

Low battery (CP730 only)

Communication error

Connection broken

Other error

Paper jam

No ink

Safety Precautions

•Use this equipment correctly according to the following precautions to avoid the risk

of injury, fire, electrical shock, malfunctions and other hazards

•Please also read the "Safety Precautions" and "Handling Precautions" sections of the

electronic manual (Printer User Guide) contained on the supplied CD-ROM.

WARNINGS

•Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-

ROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the

speakers. It is also possible to suffer from hearing loss from listening with headphones

to the loud sounds of a CD-ROM played on a music CD player.

•Store the equipment in a place where it cannot be reached by children.

•Do not disassemble or modify the devices.

•If the devices are dropped or the casing becomes damaged, do not continue

operation.

•If the devices emit smoke or a burning odor, or show other signs of significant

malfunction, immediately unplug the power cord from the power outlet.

•Do not allow water or other liquids to enter the interior of the equipment.

If the equipment is subjected to water droplets or damp salty air, gently wipe it with a

soft, absorbent cloth.

•Do not insert or drop metallic objects or flammable substances into the equipment

interior.

Immediately switch off the printer power and remove the power cord from the

electrical outlet before attempting to remove the object or substance. (If powering it

by battery, remove the battery before removal.)

•Do not touch metal parts of the devices or the power plug during thunderstorms.

Immediately stop using the equipment and distance yourself from it.

•Do not use flammable solvents such as alcohol, benzine, or paint thinner to clean the

devices.

•Do not rest heavy objects on the power cord or plug, pull on it with excessive force or

damage it.

•Do not use a power source (AC adapter, battery) that is not specified for the

equipment.

•Remove the power cord on a regular periodic basis and wipe away the dust and dirt

that collects on the plug, the exterior of the power outlet and the surrounding area.

•Do not handle the power cord if your hands are wet.

• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form, by any means, without the prior written permission of Canon.

• While every effort has been made to ensure that the information contained in this guide is accurate and complete, no

liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the

hardware and software described herein at any time without prior notice.

• Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or

malfunction of the camera, the printer, the software, the memory cards, personal computers, peripheral devices, or use

of non-Canon memory cards.

• The SDHC logo and miniSDHC logo are trademarks.

FCC Notice

(Printer, Model CD1023/CD1024)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions;

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B

digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cable with the ferrite core provided with the digital camera must be used with this

equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in

the manual. If such changes or modifications should be made, you could be required to

stop operation of the equipment.

Canon U.S.A., Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516) 328-5600

Canadian Radio Interference Regulations

This Class B digital apparatus complies with Canadian ICES-003.

Réglementation canadienne sur les interférences radio

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CDI-E262-010

xx06xxxx

PRINTED IN JAPAN

Vector Power On Board Vec021stc User Manual
U Line Combo B198 User Manual
Toshiba Air Conditioner Rav Sm802ct E User Manual
Soleus Air 3119233 User Manual
Philips Sc468 User Manual
Mitsubishi Mr Slim Pch42ek User Manual
DBTECHNOLOGIES OPERA UNICA 12 User Manual
DACOR MWDV27 02 User Manual
BLACK DECKER LM175 User Manual
ASUS X540Y User Manual