Online User's Guide
HL-L2390DW
DCP-L2550DW
HL-L2395DW
MFC-L2690DW
MFC-L2690DWXL
MFC-L2710DW
MFC-L2717DW
MFC-L2730DW
MFC-L2750DW
MFC-L2750DWXL
© 2019 Brother Industries, Ltd. All rights reserved.
Scan to Email Attachment.................................................................................................................. 75
Scan to Network (Windows)............................................................................................................... 83
Configure Certificate for Signed PDF................................................................................................. 98
Disable Scanning from Your Computer .............................................................................................. 99
Scan from Your Computer (Windows)........................................................................................................ 100
Scan Using ControlCenter4 Home Mode (Windows)....................................................................... 101
Scan Using Nuance PaperPort 14SE or Other Windows Applications....................................... 134
Scan from Your Computer (Mac)................................................................................................................ 142
Enlarge or Reduce Copied Images............................................................................................................ 153
Make N in 1 Copies Using the Page Layout Feature................................................................................. 155
Fax...................................................................................................................................................... 166
Send a Fax....................................................................................................................................... 168
Send a 2-sided Fax from the ADF.................................................................................................... 172
Send a Fax in Real Time.................................................................................................................. 178
Add a Cover Page to Your Fax......................................................................................................... 180
Cancel a Fax in Progress................................................................................................................. 183
Check and Cancel a Pending Fax.................................................................................................... 184
Fax Options...................................................................................................................................... 185
Memory Receive Options................................................................................................................. 200
Voice Operations.............................................................................................................................. 216
Dial a Number Using One Touch Dial............................................................................................... 228
ii
Set up Groups for Broadcasting....................................................................................................... 234
Telephone Services and External Devices................................................................................................. 242
Voice Mail......................................................................................................................................... 243
External TAD (Telephone Answering Device)................................................................................... 250
External and Extension Telephones................................................................................................. 253
PC-FAX for Mac .............................................................................................................................. 290
Network.............................................................................................................................................. 293
Additional Methods of Configuring Your Brother Machine for a Wireless Network .................................... 297
Before Configuring Your Brother Machine for a Wireless Network................................................... 298
Configure Your Machine for a Wireless Network.............................................................................. 299
Setup (WPS).................................................................................................................................. 300
Setup (WPS).................................................................................................................................. 302
Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast ........................ 309
Use Wi-Fi Direct ............................................................................................................................. 312
Print the WLAN Report..................................................................................................................... 327
Technical Information for Advanced Users................................................................................................. 334
Reset the Network Settings to the Factory Settings......................................................................... 335
Security.............................................................................................................................................. 336
Lock the Machine Settings......................................................................................................................... 337
Send an Email Securely................................................................................................................... 383
Mobile/Web Connect......................................................................................................................... 388
Brother Web Connect Overview....................................................................................................... 390
iii
Online Services Used with Brother Web Connect............................................................................ 391
Set Up Brother Web Connect........................................................................................................... 397
Scan and Upload Documents Using Brother Web Connect............................................................. 407
Google Cloud Print Overview........................................................................................................... 412
Print from Google Chrome or Chrome OS ................................................................................. 417
Print from Google Drive for Mobile ................................................................................................ 418
Print from Gmail Webmail Service for Mobile................................................................................ 419
Before Using AirPrint........................................................................................................................ 422
Print Using AirPrint........................................................................................................................... 425
Send a Fax Using AirPrint (For MFC Models).................................................................................. 432
Mopria Print Service................................................................................................................................. 436
Brother iPrint&Scan for Mobile Devices..................................................................................................... 437
ControlCenter.................................................................................................................................... 439
Scan Using ControlCenter4 Home Mode (Windows)....................................................................... 443
Create a Custom Tab Using ControlCenter4 Advanced Mode (Windows)....................................... 447
Brother iPrint&Scan for Windows and Mac.................................................................................... 449
Troubleshooting................................................................................................................................ 451
Document is Jammed in the Top of the ADF Unit ............................................................................ 464
Paper Jams................................................................................................................................................ 467
Paper is Jammed in the Paper Tray................................................................................................. 468
Paper is Jammed in the Back of the Machine.................................................................................. 471
Telephone and Fax Problems .................................................................................................................... 485
iv
Set Dial Tone Detection.................................................................................................................... 490
Set Telephone Line Compatibility for Interference and VoIP Systems ............................................. 491
Use the Network Connection Repair Tool (Windows) ...................................................................... 499
Other Problems.......................................................................................................................................... 505
Transfer Your Faxes or Fax Journal Report............................................................................................... 507
Reset Your Brother Machine ............................................................................................................ 517
Routine Maintenance........................................................................................................................ 519
Replace the Toner Cartridge ............................................................................................................ 522
Replace the Drum Unit..................................................................................................................... 525
Clean the Touchscreen LCD ............................................................................................................ 531
Clean the Corona Wire..................................................................................................................... 532
Clean the Drum Unit Using Drum Dot Print...................................................................................... 533
Pack and Ship Your Brother Machine ........................................................................................................ 541
Change Machine Settings from the Control Panel..................................................................................... 544
In the Event of Power Failure (Memory Storage)............................................................................. 545
Save Your Favorite Settings as a Shortcut....................................................................................... 571
Settings and Features Tables........................................................................................................... 577
Change Machine Settings from Your Computer......................................................................................... 611
Change the Machine Settings Using Remote Setup........................................................................ 617
Specifications............................................................................................................................................. 629
How to Enter Text on Your Brother Machine.............................................................................................. 637
v
vi
Definitions of Notes
We use the following symbols and conventions throughout this User's Guide:
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injuries.
WARNING
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injuries.
CAUTION
IMPORTANT
NOTE
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may
result in damage to property or loss of product functionality.
NOTE specifies the operating environment, conditions for installation, or special
conditions of use.
Tips icons indicate helpful hints and supplementary information.
Electrical Hazard icons alert you to possible electrical shock.
Fire Hazard icons alert you to the possibility of a fire.
Hot Surface icons warn you not to touch hot machine parts.
Prohibition icons indicate actions you must not perform.
Bold
Italics
Bold style identifies buttons on the machine's control panel or computer screen.
Italicized style emphasizes an important point or refers you to a related topic.
Courier New font identifies messages shown on the machine's LCD.
Courier New
Related Information
2
Notice - Disclaimer of Warranties (USA and Canada)
BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS
(COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT
WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS
OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY,
CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE
SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY
SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT
APPLY TO YOU.
IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU FOR ANY CONSEQUENTIAL,
INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE
USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN
CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT BROTHER’S
LICENSOR’S LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND
REGARDLESS OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
Related Information
3
Trademarks
BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.
Microsoft, Windows, Windows Server, SharePoint, Internet Explorer, PowerPoint, Excel, OneNote and OneDrive
are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
Apple, Mac, macOS, Safari, AirPrint, the AirPrint logo, iPad, iPhone and iPod touch are trademarks of Apple Inc.,
registered in the United States and other countries.
App Store is a service mark of Apple Inc.
Nuance and PaperPort are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates
in the United States and/or other countries.
PostScript and PostScript 3 are either registered trademarks or trademarks of Adobe Systems Incorporated in
the United States and/or other countries.
®
Wi-Fi, Wi-Fi Alliance and Wi-Fi Direct are registered trademarks of Wi-Fi Alliance .
WPA, WPA2, Wi-Fi CERTIFIED, Wi-Fi Protected Setup and Wi-Fi Protected Setup logo are trademarks of Wi-Fi
®
Alliance .
Android, Gmail, Google Cloud Print, Google Drive, Google Chrome, Chrome OS and Google Play are
trademarks of Google Inc. Use of these trademarks is subject to Google Permissions.
®
®
Mopria and the Mopria Logo are registered trademarks and service marks of Mopria Alliance, Inc. in the
United States and other countries. Unauthorized use is strictly prohibited.
Mozilla and Firefox are registered trademarks of the Mozilla Foundation.
Intel is a trademark of Intel Corporation in the U.S. and/or other countries.
Evernote and the Evernote Elephant logo are trademarks of Evernote Corporation and used under a license.
®
The Bluetooth word mark is a registered trademark owned by the Bluetooth SIG, Inc. and any use of such
marks by Brother Industries, Ltd. is under license.
WordPerfect is a registered trademark of Corel Corporation and/or its subsidiaries in Canada, the United States
and/or other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its
proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents
and any other materials are all trademarks or registered trademarks of those respective companies.
Related Information
4
Important Note
•
Do not use this product outside the country of purchase as it may violate the wireless telecommunication and
power regulations of that country.
•
•
Not all models are available in all countries.
Windows 10 in this document represents Windows 10 Home, Windows 10 Pro, Windows 10 Education and
Windows 10 Enterprise.
•
•
•
•
•
Windows Server 2008 in this document represents Windows Server 2008 and Windows Server 2008 R2.
In this User's Guide, the LCD messages of the MFC-L2750DW are used unless otherwise specified.
In this User's Guide, the illustrations of the MFC-L2750DW are used unless otherwise specified.
The screens in this User's Guide are for illustration purposes only and may differ from the actual screens.
Unless otherwise specified, the screens in this manual are from Windows 7 and macOS v10.10.5. Screens
on your computer may vary depending on your operating system.
•
•
The contents of this guide and the specifications of this product are subject to change without notice.
This documentation is both for MFC and DCP models. In this User's Guide, DCP models includes HL-XXXX
(where XXXX is the name of your model).
•
Not all features are available in countries subject to applicable export restrictions.
Related Information
5
Control Panel Overview
Related Models: HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
The control panel may vary depending on your model.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1
2
3
4
1. One Touch Buttons
Store and recall up to eight fax and telephone numbers.
To access stored One Touch fax and telephone numbers 1-4, press the One Touch button assigned to that
number. To access stored One Touch fax and telephone numbers 5-8, press and hold Shift as you press the
button.
2. Function Buttons
Redial/Pause
Press to dial the last number you called. This button also inserts a pause when programming quick dial
numbers or when dialing a number manually.
Hook
Press Hook before dialing to ensure a fax machine answers, and then press Start.
If the machine is in Fax/Tel (F/T) Mode and you pick up the handset of an external telephone during the
F/T ring (pseudo double-rings), press Hook to talk.
WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
Resolution (for certain models only)
Press to change the Fax resolution.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
7
2-sided
Press to copy on both sides of a sheet of paper.
Options
Press to access temporary settings for faxing, scanning, or copying.
3. Liquid Crystal Display (LCD)
Displays messages to help you set up and use the machine.
If the machine is in Fax Mode, the LCD displays:
a
01/01 12:00AM
Fax Only
b
a. Date & Time
b. Receive Mode
When you press COPY, the LCD displays:
c
d
Stack Copies:01
100%□□■□□
Auto
g
e
f
c. Type of copy
d. Number of copies
e. Quality
f. Contrast
g. Copy ratio
4. Mode Buttons
FAX
Press to switch the machine to Fax Mode.
SCAN
Press to switch the machine to Scan Mode.
COPY
Press to switch the machine to Copy Mode.
5
6
7
8
9
8
5. Menu Buttons
Clear
Press to delete entered data or cancel the current setting.
Menu
Press to access the Menu for programming your machine settings.
OK
Press to store your machine settings.
d or c
Press to scroll back or forward through menu selections.
a or b
•
•
Press to scroll up or down through menus and options.
Press to change the resolution in Fax Mode.
Press
to access speed dial numbers.
6. Dial Pad
•
•
Use to dial fax and telephone numbers.
Use as a keyboard to enter text or characters.
7.
Power On/Off
•
•
Turn on the machine by pressing
.
Turn off the machine by pressing and holding
. The LCD displays [Shutting Down]and stays on
for a few seconds before turning off. If you have an external telephone or TAD connected, it is always
available.
8. Stop/Exit
•
•
Press to stop an operation.
Press to exit from a menu.
9. Start
•
•
•
Press to start sending faxes.
Press to start copying.
Press to start scanning documents.
HL-L2390DW/DCP-L2550DW
1
2
3
9
1.
Power On/Off
•
•
Turn on the machine by pressing
.
Turn off the machine by pressing and holding
for a few seconds before turning off.
.. The LCD displays [Shutting Down]and stays on
2. Function Buttons
Copy/Scan Options
Press to access temporary settings for scanning or copying.
WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
Scan
Press to switch the machine to Scan Mode.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
3. Liquid Crystal Display (LCD)
Displays messages to help you set up and use the machine.
If the machine is in Ready Mode or Copy Mode, the LCD displays:
a
b
Stack Copies:01
100%□□■□□
Auto
e
c
d
a. Type of copy
b. Number of copies
c. Quality
d. Contrast
e. Copy ratio
4
5
6
4. Menu Buttons
Menu
Press to access the Menu for programming your machine settings.
10
Clear
•
•
Press to delete entered data.
Press to cancel the current setting.
OK
Press to store your machine settings.
a or b
Press to scroll up or down through menus and options.
5. Stop/Exit
•
•
Press to stop an operation.
Press to exit from a menu.
6. Start
•
•
Press to start copying.
Press to start scanning documents.
Related Information
11
Control Panel Overview
Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
The control panel may vary depending on your model.
5
6
2
3
4
1
1. Near Field Communication (NFC) (HL-L2395DW/MFC-L2750DW/MFC-L2750DWXL)
™
If your Android device supports the NFC feature, you can print from your device or scan documents to your
device by touching it to the NFC symbol on the control panel.
2. Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on the touchscreen.
3. Menu Buttons
(Back)
Press to go back to the previous menu.
(Home)
Press to return to the Home screen.
(Cancel)
Press to cancel an operation.
4. Dial Pad (Numerical buttons)
Press the numbers on the touchpanel to dial telephone or fax numbers, and to enter the number of copies.
5. LED Power Indicator
The LED lights up depending on the machine’s power status.
6.
Power On/Off
•
•
Turn on the machine by pressing
.
Turn off the machine by pressing and holding down
. The touchscreen LCD displays [Shutting
Down]and stays on for a few seconds before turning off. If you have an external telephone or TAD
connected, it is always available.
Related Information
12
Touchscreen LCD Overview
Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
When a Home screen is displayed, press d or c to display the other Home screens.
The Home screen displays the machine's status when the machine is idle. When displayed, this screen indicates
that your machine is ready for the next command.
The available features will vary depending on your model.
1
2
5
6
4
3
1. Date & Time
Displays the date and time set on the machine.
2. Modes
•
•
•
•
•
•
[Fax]
Press to access Fax mode.
[Copy]
Press to access Copy mode.
[Scan]
Press to access Scan mode.
[Secure Print]
Press to access the [Secure Print]option.
[Web]
Press to connect the Brother machine to an Internet service.
[Apps]
Press to connect the Brother machine to the Brother Apps service.
3.
Toner
Displays the remaining toner life. Press to access the [Toner]menu.
When the Toner cartridge is near the end of life or has a problem, an error icon
icon.
appears on the Toner
13
4.
5.
[Settings]
Press to access the [Settings]menu.
If Secure Function Lock or Setting Lock has been turned on, a lock
unlock the machine to use Settings.
icon appears on the LCD. You must
or
(Wireless Status for wireless models)
Press to configure wireless settings.
If you are using a wireless connection, a four-level indicator in each of the Home screens displays the current
wireless signal strength.
Wireless LAN Disabled
6.
[Shortcuts]
Press to create Shortcuts for frequently-used operations, such as sending a fax, making a copy, scanning
and using Web Connect.
•
•
Three Shortcuts screens are available with up to four Shortcuts on each Shortcuts screen. A total of 12
Shortcuts are available.
To display the other Shortcuts screens, press d or c.
Stored Fax(es)
The number of received faxes in memory appears at the top of the screen.
Press
, and then press [Yes]to print the faxes.
Warning icon
14
The warning icon
appears when there is an error or maintenance message; press the message area to
to return to Ready Mode.
view it, and then press
NOTE
•
This product adopts the font of ARPHIC TECHNOLOGY CO., LTD.
Related Information
15
How to Navigate the Touchscreen LCD
Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Press your finger on the LCD to operate it. To display and access all the options, press d c or a b on the LCD to
scroll through them.
The following steps explain how to navigate through changing a machine setting. In this example, the LCD
Backlight setting is changed from [Light]to [Med].
IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
NOTE
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this
may cause an error.
1. Press
([Settings]).
2. Press [All Settings].
3. Press a or b to display the [General Setup]option, and then press [General Setup].
4. Press a or b to display the [LCD Settings]option, and then press [LCD Settings].
5. Press [Backlight].
16
Settings Screen Overview
Related Models: HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Press
to view the current machine status on the LCD.
Use the Settings menu to access all of your Brother machine's settings.
1. Toner
•
•
Displays the remaining toner life.
Press to access the [Toner]menu.
2. Tray Setting
Press to change the paper size and paper type settings.
3. Eco Mode
Press to access the [Eco Mode]menu.
4. Network
•
•
Press to set up a network connection.
A four-level indicator on the screen displays the current wireless signal strength if you are using a
wireless connection.
5. Wi-Fi Direct
™
Press to set up a Wi-Fi Direct network connection.
6. All Settings
Press to access the menu of all machine settings.
Related Information
18
Access Brother Utilities (Windows)
Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on
your computer.
1. Do one of the following:
•
(Windows 7)
Click
(Start) > All Programs > Brother > Brother Utilities.
•
•
(Windows 8)
Tap or click
(Windows 8.1)
(Brother Utilities) either on the Start screen or the desktop.
Move your mouse to the lower left corner of the Start screen and click
(if you are using a touch-
based device, swipe up from the bottom of the Start screen to bring up the Apps screen).
When the Apps screen appears, tap or click
(Brother Utilities).
•
(Windows 10)
Click
> Brother > Brother Utilities.
2. Select your machine (where XXXX is the name of your model).
3. Choose the operation you want to use.
19
Related Information
20
Home > Introduction to Your Brother Machine > Access Brother Utilities (Windows) > Uninstall the Brother
Software and Drivers (Windows)
Uninstall the Brother Software and Drivers (Windows)
1. Do one of the following:
•
(Windows 7)
Click
(Start) > All Programs > Brother > Brother Utilities.
•
•
(Windows 8)
Tap or click
(Windows 8.1)
(Brother Utilities) either on the Start screen or the desktop.
Move your mouse to the lower left corner of the Start screen and click
(if you are using a touch-
based device, swipe up from the bottom of the Start screen to bring up the Apps screen).
When the Apps screen appears, tap or click
(Brother Utilities).
•
(Windows 10)
Click
> Brother > Brother Utilities.
2. Select your model from the drop-down list (if it is not already selected).
3. Click Tools in the left navigation bar.
•
If the Software Update Notification icon is visible, select it, and then click Check now > Check for
Software Updates > Update. Follow the on-screen instructions.
•
If the Software Update Notification icon is not visible, go to the next step.
4. Click Uninstall in the Tools section of Brother Utilities.
Follow the instructions in the dialog box to uninstall the software and drivers.
Related Information
21
Tray
Load Paper in the Paper Tray
•
If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears
on the LCD asking if you want to change the paper size and paper type. Change the paper size and paper
type settings if needed, following the LCD instructions.
•
When you load a different size and type of paper in the tray, you must also change the Paper Size and
Paper Type settings in the machine, or on your computer.
1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
Press the green release levers to slide the paper guides.
For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray and then pull out
the back of the paper tray. (Legal and Folio size paper are not available in some regions.)
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
25
5. Make sure the paper is below the maximum paper mark (b b b).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
7. Lift the support flap to prevent paper from sliding off the output tray.
Related Information
26
Plain Paper, Thin Paper, Recycled Paper and Bond Paper in the Manual Feed Slot
Load and Print Plain Paper, Thin Paper, Recycled Paper and Bond
Paper in the Manual Feed Slot
When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on
your computer at the same time.
1. Lift the support flap to prevent paper from sliding off the face down output tray.
2. Open the manual feed slot cover.
3. Use both hands to slide the manual feed slot paper guides to fit the width of the paper you are using.
4. Using both hands, put one full sheet of paper in the manual feed slot until the front edge touches the paper
feed roller. When you feel the machine pull it in, let go.
28
•
•
Load paper into the manual feed slot with the printing surface facing up.
Make sure the paper is straight and in the correct position in the manual feed slot. If it is not, the paper
may not be fed correctly, resulting in a skewed printout or a paper jam.
•
To remove a small printout from the output tray, use both hands to lift up the scanner cover.
•
You can still use the machine while the scanner cover is up. To close the scanner cover, push it down
with both hands.
5. Send your print job to the machine.
Change your print preferences in the Print screen before sending the print job from your computer.
6. After the printed page comes out from the machine, load the next sheet of paper in the manual feed slot.
Repeat for each page that you want to print.
Related Information
29
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print on
Thick Paper and Labels in the Manual Feed Slot
Load and Print on Thick Paper and Labels in the Manual Feed Slot
When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on
your computer at the same time.
1. Open the machine's back cover (the face up output tray).
The machine automatically turns on Manual Feed mode when you load paper in the manual feed slot.
2. On the front of the machine, open the manual feed slot cover.
3. Use both hands to slide the manual feed slot paper guides to fit the width of the paper that you are using.
4. Using both hands, put one full sheet of paper in the manual feed slot until the front edge touches the paper
feed roller. When you feel the machine pull it in, let go.
•
•
•
•
Load paper into the manual feed slot with the printing surface facing up.
Pull the paper out completely if you must reload the paper into the manual feed slot.
Do not put more than one sheet of paper in the manual feed slot at one time, as it may cause a jam.
Make sure the paper is straight and in the correct position in the manual feed slot. If it is not, the paper
may not be fed correctly, resulting in a skewed printout or a paper jam.
5. Send your print job to the machine.
30
Change your print preferences in the Print screen before sending the print job from your computer.
6. After the printed page comes out from the back of the machine, load the next sheet of paper in the manual
feed slot. Repeat for each page that you want to print.
7. Close the back cover (the face up output tray) until it locks in the closed position.
Related Information
31
Home > Paper Handling > Load Paper > Load and Print Paper in the Manual Feed Slot > Load and Print on
Envelopes in the Manual Feed Slot
Load and Print on Envelopes in the Manual Feed Slot
When you load a different paper size in the tray, you must change the Paper Size setting in the machine or on
your computer at the same time.
1. Open the machine's back cover (the face up output tray).
The machine automatically turns on Manual Feed mode when you load paper in the manual feed slot.
2. Pull down the two green levers, one on the left side and one on the right side, as shown in the illustration.
3. On the front of the machine, open the manual feed slot cover.
4. Use both hands to slide the manual feed slot paper guides to fit the width of the paper that you are using.
5. Using both hands, put one envelope in the manual feed slot until the front edge touches the paper feed roller.
When you feel the machine pull it in, let go.
32
•
•
•
•
Load the envelope into the manual feed slot with the printing surface facing up.
Pull the envelope out completely when you reload the envelope into the manual feed slot.
Do not put more than one envelope in the manual feed slot at one time, as it may cause a jam.
Make sure the envelope is straight and in the correct position on the manual feed slot. If it is not, the
envelope may not be fed correctly, resulting in a skewed printout or a paper jam.
6. Send your print job to the machine.
Change your print preferences in the Print dialog box before sending the print job from your computer.
Settings
Options for Envelopes
Paper Size Com-10
DL
C5
Monarch
Media Type Envelopes
Env. Thick
Env. Thin
7. After the printed envelope comes out of the machine, put in the next envelope. Repeat for each envelope that
you want to print.
8. When you have finished printing, return the two green levers you adjusted in the earlier step back to their
original positions.
9. Close the back cover (the face up output tray) until it locks in the closed position.
Related Information
33
Change the Paper Size and Paper Type
When you change the size and type of the paper you load in the tray, you must change the Paper Size and
Paper Type settings on the LCD at the same time.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [General Setup]option, and then press OK.
3. Press a or b to display the [Tray Setting]option, and then press OK.
4. Press a or b to display the [Paper Type]option, and then press OK.
5. Press a or b to display the [Thin Paper], [Plain Paper], [Thick Paper], or [Recycled Paper]
option, and then press OK.
6. Press a or b to display the [Paper Size]option, and then press OK.
7. Press a or b to display the [Letter], [Legal], [Executive], [A5], [A5(Long Edge)], [A6],
[Mexico Legal], [India Legal], [Folio], or [A4]option, and then press OK.
8. Press Stop/Exit.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [General Setup]> [Tray Setting]> [Paper
Type].
2. Press a or b to display the [Thin], [Plain Paper], [Thick], [Thicker]or [Recycled Paper]
option, and press the option you want.
The paper type may vary depending on your model.
3. Press [Paper Size].
4. Press a or b to display the [A4], [Letter], [A5], [A5(Long Edge)], [A6], [Executive], [Legal],
[Mexico Legal],[India Legal]or [Folio]option, and press the option you want.
5. Press
.
Related Information
35
Change the Check Paper Size Setting
When you turn on your machine's Check Size setting, the machine displays a message when you remove a
paper tray, asking if you changed the paper size and paper type.
The default setting is On.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [General Setup]option, and then press OK.
3. Press a or b to display the [Tray Setting]option, and then press OK.
4. Press a or b to display the [Check Size]option, and then press OK.
5. Press a or b to select the [On]or [Off]option, and then press OK.
6. Press Stop/Exit.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [General Setup]> [Tray Setting]> [Check
Size].
2. Press [On]or [Off].
3. Press
.
Related Information
36
Recommended Print Media
To get the best print quality, we recommend using the paper listed in the table.
Paper Type
Item
Plain Paper
Xerox 4200DP 20 lb
Hammermill Laser Print
2
(24 lb = 90 g/m )
Recycled Paper
Labels
No specific brand recommended
Avery laser labels white #5160
No specific brand recommended
Envelopes
Related Information
Related Topics:
37
Load Documents in the Automatic Document Feeder (ADF)
Related Models: DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Use the ADF when copying or scanning multiple-page, standard-sized documents.
•
The ADF can hold up to 50 pages and feed each sheet individually.
2
•
•
Use standard 20 lb (80 g/m ) paper.
Make sure documents with correction fluid or written in ink are completely dry.
IMPORTANT
•
•
•
•
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted, or taped.
DO NOT use cardboard, newspaper, or fabric.
To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.
Document Sizes Supported
Length:
Width:
5.8 to 14.0 in. (147.3 to 355.6 mm)
4.1 to 8.5 in. (105 to 215.9 mm)
2
Weight:
16 to 28 lb (60 to 105 g/m )
1. Unfold the ADF document output support flap.
2. Fan the pages well.
3. Stagger the pages of your document and load it face up and top edge first, into the ADF as shown in the
illustration.
4. Adjust the paper guides to fit the width of your document.
Related Information
39
Load Documents on the Scanner Glass
Use the scanner glass to fax, copy, or scan one page at a time.
Document Sizes Supported
Length:
Width:
Up to 11.8 in. (300 mm)
Up to 8.5 in. (215.9 mm)
Up to 4.4 lb (2 kg)
Weight:
To use the scanner glass, the ADF must be empty.
1. Lift the document cover.
2. Place the document on the scanner glass face down.
3. Place the corner of the page in the upper left corner of the scanner glass.
4. Close the document cover.
If the document is a book or is thick, gently press on the document cover.
Related Information
40
Unscannable and Unprintable Areas
The measurements in the table below show maximum unscannable and unprintable areas from the edges of the
most commonly-used paper sizes. These measurements may vary depending on the paper size or settings in the
application you are using.
1
2
4
3
Do not attempt to scan, copy, or print into these areas; your output will not reflect anything in these areas.
Usage
Document Size
Top (1)
Left (2)
Bottom (3)
Right (4)
Fax (Sending)
Letter, Legal
A4
0.12 in. (3 mm)
0.12 in. (3 mm)
0.16 in. (4 mm)
(ADF)
0.04 in. (1 mm)
(Scanner Glass)
0.12 in. (3 mm)
Letter, Legal
A4
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.16 in. (4.2 mm)
0.16 in. (4.2 mm)
0.16 in. (4 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.12 in. (3 mm)
0.16 in. (4.2 mm)
0.16 in. (4.2 mm)
Copy
Scan
Print
Letter
A4
Legal
Letter, Legal
A4
Related Information
1
a 1 in 1 copy and 100% document size copy
41
Using Special Paper
Always test paper samples before purchasing them to ensure desirable performance.
•
•
DO NOT use inkjet paper; it may cause a paper jam or damage your machine.
If you use bond paper, paper with a rough surface, or paper that is wrinkled or creased, the paper may exhibit
degraded performance.
Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct
sunlight and heat.
IMPORTANT
Some types of paper may not perform well or may cause damage to your machine.
DO NOT use paper:
•
•
•
•
•
•
•
•
•
•
that is highly textured
that is extremely smooth or shiny
that is curled or warped
that is coated or has a chemical finish
that is damaged, creased or folded
that exceeds the recommended weight specification in this guide
with tabs and staples
with letterheads using low temperature dyes or thermography
that is multipart or carbonless
that is designed for inkjet printing
If you use any of the types of paper listed above, they may damage your machine. This damage is not
covered under any Brother warranty or service agreement.
Related Information
42
Print a Document (Windows)
1. Select the print command in your application.
2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or
preferences button.
The printer driver window appears.
3. Make sure you have loaded the correct size paper in the paper tray.
4. Click the Paper Size drop-down list, and then select your paper size.
5. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the
application.
6. Type the number of copies (1-999) you want in the Copies field.
7. Click the Media Type drop-down list, and then select the type of paper you are using.
8. To print multiple pages on a single sheet of paper or print one page of your document on multiple sheets,
click the Multiple Page drop-down list, and then select your options.
9. Change other printer settings, if needed.
10. Click OK.
11. Complete your print operation.
45
Related Information
Related Topics:
46
Print Settings (Windows)
Basic Tab
1. Paper Size
Select the size of the paper you want to use. You can either choose from standard paper sizes or create a
custom paper size.
2. Orientation
Select the orientation (portrait or landscape) of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
3. Copies
Type the number of copies (1-999) that you want to print in this field.
Collate
Select this option to print sets of multi-page documents in the original page order. When this option is
selected, one complete copy of your document will print, and then reprint according to the number of
copies you choose. If this option is not selected, then each page will print according to the number of
copies chosen before the next page of the document is printed.
4. Media Type
Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts
its print settings according to the selected media type.
47
5. Resolution
Select the print resolution. As print resolution and speed are related, the higher the resolution, the longer it
will take to print the document.
6. Print Settings
Select the type of document you want to print.
Manual Settings...
Specify advanced settings such as brightness, contrast, and other settings.
Graphics
Use Printer Halftone
Select this option to use the printer driver to express halftones.
Brightness
Specify the brightness.
Contrast
Specify the contrast.
Graphics Quality
Select either Graphics or Text for the best print quality, based on the type of document you are
printing.
Improve Gray Printing
Select this option to improve the image quality of shaded areas.
Improve Pattern Printing
Select this option to improve the pattern printing if printed fills and patterns are different from the
fills and patterns you see on your computer screen.
Improve Thin Line
Select this option to improve the image quality of thin lines.
Use System Halftone
Select this option to use Windows to express halftones.
TrueType Mode (Available only for certain models)
Mode
Select how the fonts are processed for printing.
Use Printer TrueType Fonts
Select whether to use built-in fonts for the font processing.
7. Multiple Page
Select this option to print multiple pages on a single sheet of paper, or print one page of your document on
multiple sheets.
Page Order
Select the page order when printing multiple pages on a single sheet of paper.
Border Line
Select the type of border to use when printing multiple pages on a single sheet of paper.
8. 2-sided / Booklet
Select this option to print on both sides of the paper, or print a document in booklet format using 2-sided
printing.
2-sided Settings button
Click this button to select the type of 2-sided binding. Four types of 2-sided bindings are available for each
orientation.
48
9. Paper Source
Select the paper source setting according to your print conditions or purpose.
First Page
Select the paper source to use for printing the first page.
Other Pages
Select the paper source to use for printing the second and subsequent pages.
Advanced Tab
1. Scaling
Select these options to enlarge or reduce the size of the pages in your document.
Fit to Paper Size
Select this option to enlarge or reduce the document pages to fit a specified paper size. When you select
this option, select the paper size you want from the drop-down list.
Free [25 - 400%]
Select this option to enlarge or reduce the document pages manually. When you select this option, type a
value into the field.
2. Reverse Print
Select this option to rotate the printed image 180 degrees.
49
3. Use Watermark
Select this option to print a logo or text on your document as a watermark. Select one of the preset
watermarks, add a new watermark, or use an image file you have created.
4. Header-Footer Print
Select this option to print the date, time and PC login user name on the document.
5. Toner Save Mode
Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but are
still legible.
6. Secure Print (Available only for certain models)
This feature ensures that confidential or sensitive documents do not print until you enter a password on the
machine's control panel.
7. Administrator
This feature allows you to change the administrator password and restrict various printing functions.
8. User Authentication (Available only for certain models)
This feature allows you to confirm the restrictions for each user.
9. Other Print Options button
Sleep Time
Select this option to set the machine to enter sleep mode immediately after printing.
Macro (Available only for certain models)
Select this feature to print an electronic form (macro), which you have stored in your machine's memory,
as an overlay on the print job.
Density Adjustment
Specify the print density.
Improve Print Output
Select this option to reduce the amount of paper curling and improve the toner fixing.
Skip Blank Page
Select this option to allow the printer driver to automatically detect blank pages and exclude them from
printing.
Print Text in Black
Select this option when you want to print color text in black.
Print Archive
Select this option to save the print data as a PDF file to your computer.
Eco settings
Select this option to reduce printing noise.
Related Information
Related Topics:
50
Change the Default Print Settings (Windows)
When you change an application's print settings, the changes only apply to documents printed with that
application. To change print settings for all Windows applications, you must configure the printer driver
properties.
1. Do one of the following:
•
•
•
For Windows Server 2008
Click
(Start) > Control Panel > Hardware and Sound > Printers.
For Windows 7 and Windows Server 2008 R2
Click
(Start) > Devices and Printers.
For Windows 8
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware and Sound group, click View devices and printers.
•
For Windows 10 and Windows Server 2016
Click
> Windows System > Control Panel. In the Hardware and Sound group, click View devices
and printers.
•
•
For Windows Server 2012
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware group, click View devices and printers.
For Windows Server 2012 R2
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers.
2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer
properties. If printer driver options appear, select your printer driver.
3. Click the General tab, and then click the Printing Preferences... or Preferences... button.
The printer driver dialog box appears.
•
•
To configure the tray settings, click the Device Settings tab(Available only for certain models).
To change the printer port, click the Ports tab.
4. Select the print settings you want to use as defaults for all of your Windows programs.
5. Click OK.
6. Close the printer properties dialog box.
Related Information
51
®
™
Driver (PostScript 3 Language Emulation) (Windows)
® ™
Print a Document Using the BR-Script3 Printer Driver (PostScript 3
Language Emulation) (Windows)
Related Models: DCP-L2550DW/HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
®
The BR-Script3 printer driver lets you print PostScript data more clearly.
To install the PS driver (BR-Script3 printer driver), launch the Brother installation disc, select Custom in the
Select Machine section, and then select the PS Driver check box.
1. Select the print command in your application.
2. Select Brother XXX-XXXX BR-Script3 (where XXXX is the name of your model), and then click the printing
properties or preferences button.
The printer driver window appears.
3. Click the Layout, Paper/Quality, or Secure Print tab to change basic print settings. (Available only for
certain models)
Click the Layout or Paper/Quality tab, and then click the Advanced... button to change advanced print
settings.
4. Click OK.
5. Complete your print operation.
Related Information
52
Computer (Windows)
Monitor the Status of the Machine from Your Computer (Windows)
The Status Monitor utility is a configurable software tool for monitoring the status of one or more devices,
allowing you to get immediate notification of errors.
•
Do one of the following:
-
-
Double-click the
(Windows 7)
icon in the task tray.
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click Tools in the left
navigation bar, and then click Status Monitor.
-
-
(Windows 8)
Click
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click Tools in the left navigation bar, and then click Status Monitor.
(Windows 8.1)
Move your mouse to the lower left corner of the Start screen and click
(if you are using a touch-
based device, swipe up from bottom of the Start screen to bring up the Apps screen). When the Apps
screen appears, tap or click
(Brother Utilities), and then click the drop-down list and select your
model name (if not already selected). Click Tools in the left navigation bar, and then click Status
Monitor.
-
(Windows 10)
Click
> Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click Tools in the left
navigation bar, and then click Status Monitor.
Troubleshooting
Click the Troubleshooting button to access the troubleshooting website.
Visit the Genuine Supplies website
Click the Visit the Genuine Supplies website button for more information on Brother genuine supplies.
Related Information
Related Topics:
53
Print a Document (Mac)
1. Make sure you have loaded the correct size paper in the paper tray.
2. From an application, such as Apple TextEdit, click the File menu, and then select Print.
3. Select Brother XXX-XXXX (where XXXX is your model name).
4. Type the number of copies you want in the Copies field.
5. Click the Paper Size pop-up menu, and then select your paper size.
6. Select the Orientation option that matches the way you want the document to print.
7. Click the application pop-up menu, and then select Print Settings.
The Print Settings options appear.
8. Click the Media Type pop-up menu, and then select the type of paper you are using.
9. Change other printer settings, if needed.
10. Click Print.
Related Information
Related Topics:
55
Print Options (Mac)
Page Setup
1. Paper Size
Select the size of the paper you want to use. You can either choose from standard paper sizes or create a
custom paper size.
2. Orientation
Select the orientation (portrait or landscape) of your printout.
If your application contains a similar setting, we recommend that you set the orientation using the application.
3. Scale
Type a value into the field to enlarge or reduce the pages in your document to fit the selected paper size.
56
Layout
1. Pages per Sheet
Select the number of pages to print on a single sheet of paper.
2. Layout Direction
Select the page order when printing multiple pages on a single sheet of paper.
3. Border
Select the type of border to use when printing multiple pages on a single sheet of paper.
4. Two-Sided
Select whether to print on both sides of the paper.
5. Reverse page orientation
Select this option to rotate the printed image 180 degrees.
6. Flip horizontally
Select this option to reverse the printed image on the page horizontally from left to right.
57
Paper Handling
1. Collate pages
Select this option to print sets of multi-page documents in the original page order. When this option is
selected, one complete copy of your document will print, and then reprint according to the number of copies
you choose. If this option is not selected, then each page will print according to the number of copies chosen
before the next page of the document is printed.
2. Pages to Print
Select which pages you want to print (even pages or odd pages).
3. Page Order
Select the page order.
4. Scale to fit paper size
Select this option to enlarge or reduce the pages in your document to fit the selected paper size.
5. Destination Paper Size
Select the paper size to print on.
6. Scale down only
Select this option if you want to reduce the pages in your document when they are too large for the selected
paper size. If this option is selected and the document is formatted for a paper size that is smaller than the
paper size you are using, the document will be printed at its original size.
58
Print Settings
1. Media Type
Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts
its print settings according to the selected media type.
2. Print Quality
Select the print resolution you want. Because print quality and speed are related, the higher the quality, the
longer it will take to print the document.
3. Paper Source
Select the paper source setting according to your print conditions or purpose.
4. Advanced
Toner Save Mode
Select this feature to conserve toner by using less toner to print documents; printouts appear lighter, but
are still legible.
Graphics Quality
Select either Graphics or Text for the best print quality, based on the type of document you are printing.
Improve Print Output
Select this option to reduce the amount of paper curling and improve the toner fixing.
Density Adjustment
Specify the print density.
Quiet Mode
Select this option to reduce printing noise.
Other Print Options
Skip Blank Page
Select this option to allow the printer driver to automatically detect blank pages and exclude them from
printing.
59
Secure Print
1. Secure Print (Available only for certain models)
This feature ensures that confidential or sensitive documents do not print until you enter a password on the
machine's control panel.
Related Information
Related Topics:
60
Home > Print > Print from Your Computer (Mac) > Monitor the Status of the Machine from Your Computer
(Mac)
Monitor the Status of the Machine from Your Computer (Mac)
The Status Monitor utility is a configurable software tool for monitoring the status of a device, allowing you to get
immediate notification of error messages, such as paper empty or paper jam, at preset update intervals. You can
also access Web Based Management.
1. Click the System Preferences menu, select Print & Scan or Printers & Scanners, and then select your
machine.
2. Click the Options & Supplies button.
3. Click the Utility tab, and then click the Open Printer Utility button.
Status Monitor starts.
Troubleshooting
Click the Troubleshooting button to access the troubleshooting website.
Visit the Genuine Supplies website
Click the Visit the Genuine Supplies website button for more information on Brother genuine supplies.
Updating the machine's status
To view the latest machine status while the Status Monitor window is open, click the
icon. You can
set the interval at which the software updates machine status information. Click Brother Status Monitor in
the menu bar, and then select Preferences.
Web Based Management (Network Connection Only)
Access the Web Based Management System by clicking the machine icon on the Status Monitor screen.
You can use a standard Web Browser to manage your machine using HTTP (Hyper Text Transfer
Protocol).
Related Information
Related Topics:
61
Cancel a Print Job
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Press Stop/Exit.
To cancel multiple print jobs, press and hold Stop/Exit for four seconds.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
.
To cancel multiple print jobs, press and hold
for about four seconds.
Related Information
• Print
Related Topics:
62
Test Print
If there are problems with print quality, follow these instructions to do a test print:
HL-L2390DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Printer]option, and then press OK.
3. Press a or b to display the [Print Options]option, and then press OK.
4. Press the [Test Print]option, and then press OK.
5. Press Start.
The machine prints a Test Print page.
6. Press Stop/Exit.
DCP-L2550DW
1. Press Menu.
2. Press a or b to display the [Printer]option, and then press OK.
3. (For Printer Emulation Supported models)
Press a or b to display the [Print Options]option, and then press OK.
4. Press a or b to display the [Test Print]option, and then press OK.
5. Press Start.
The machine prints a Test Print page.
6. Press Stop/Exit.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Printer]> [Print Options]> [Test Print].
2. Press [Yes].
3. Press
.
Related Information
• Print
Related Topics:
63
Scan Photos and Graphics
Send scanned photos or graphics directly to your computer.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software (Windows) or Brother iPrint&Scan (Mac).
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to PC]option, and then press OK.
4. Press a or b to select the [Image]option, and then press OK.
5. If the machine is connected over the network, press a or b to select the destination computer.
6. Press OK.
If the LCD prompts you to enter a PIN, enter the four digit PIN for the destination computer on the LCD and
then press OK.
7. Do one of the following:
•
To change the scan settings for this document, press Options or Copy/Scan Options and then go to the
next step.
•
To use the default scan settings, press Start.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
•
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
8. Select the scan settings you want to change:
• [Scan Type]
• [Resolution]
• [File Type]
• [Document Size]
• [ADF Auto Deskew](available for certain models)
66
• [Remove Bkg. Clr]
(available only for the [Color]and [Gray]options.)
9. Press OK.
10. Press Start.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press [Scan]> [to PC]> [to Image].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD and then press
[OK].
4. Do one of the following:
•
•
To change the scan settings, press [Options], and then go to the next step.
To use the default scan settings, press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
5. To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
Press [2-sided Scan], and then select the document type.
•
Option
2-sided Scan: Long Edge
Description
2-sided Scan: Short Edge
6. Select the scan settings you want to change:
• [Resolution]
• [File Type]
• [Scan Type]
• [Document Size]
• [Scan Settings]
• [ADF Auto Deskew](available for certain models)
67
• [Remove Background Color]
(available only for the [Color]and [Gray]options.)
7. Press [OK].
8. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Related Information
Related Topics:
68
a PDF File
Save Scanned Data to a Folder as a PDF File
Scan documents and save them to a folder on your computer as PDF files.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software (Windows) or Brother iPrint&Scan (Mac).
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to PC]option, and then press OK.
4. Press a or b to select the [File]option, and then press OK.
5. If the machine is connected over the network, press a or b to select the destination computer.
6. Press OK.
If the LCD prompts you to enter a PIN, enter the four digit PIN for the destination computer on the LCD and
then press OK.
7. Do one of the following:
•
To change the scan settings for this document, press Options or Copy/Scan Options and then go to the
next step.
•
To use the default scan settings, press Start.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
•
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
8. Select the scan settings you want to change:
• [Scan Type]
• [Resolution]
• [File Type]
• [Document Size]
• [ADF Auto Deskew](available for certain models)
• [Remove Bkg. Clr]
(available only for the [Color]and [Gray]options.)
69
9. Press OK.
10. Press Start.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press [Scan]> [to PC]> [to File].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD and then press
[OK].
4. Do one of the following:
•
•
To change the scan settings, press [Options], and then go to the next step.
To use the default scan settings, press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
5. To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
Press [2-sided Scan], and then select the document type.
•
Option
2-sided Scan: Long Edge
Description
2-sided Scan: Short Edge
6. Select the scan settings you want to change:
• [Resolution]
• [File Type]
• [Scan Type]
• [Document Size]
• [Scan Settings]
• [ADF Auto Deskew](available for certain models)
• [Remove Background Color]
(available only for the [Color]and [Gray]options.)
70
7. Press [OK].
8. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Related Information
Related Topics:
71
(OCR)
Scan to an Editable Text File (OCR)
Your machine can convert characters in a scanned document to text using optical character recognition (OCR)
technology. You can edit this text using your preferred text-editing application.
ABC
C
B
A
•
•
The Scan to OCR feature is available for certain languages.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to PC]option, and then press OK.
4. Press a or b to select the [OCR]option, and then press OK.
5. If the machine is connected over the network, press a or b to select the destination computer.
6. Press OK.
If the LCD prompts you to enter a PIN, enter the four digit PIN for the destination computer on the LCD and
then press OK.
7. Do one of the following:
•
To change the scan settings for this document, press Options or Copy/Scan Options and then go to the
next step.
•
To use the default scan settings, press Start.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
•
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
8. Select the scan settings you want to change:
• [Scan Type]
• [Resolution]
• [File Type]
• [Document Size]
• [ADF Auto Deskew](available for certain models)
• [Remove Bkg. Clr]
72
(available only for the [Color]and [Gray]options.)
9. Press OK.
10. Press Start.
The machine scans the document, converts it to editable text, and then sends it to your default word
processing application.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press [Scan]> [to PC]> [to OCR].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD and then press
[OK].
4. Do one of the following:
•
•
To change the scan settings, press [Options], and then go to the next step.
To use the default scan settings, press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
5. To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
Press [2-sided Scan], and then select the document type.
•
Option
2-sided Scan: Long Edge
Description
2-sided Scan: Short Edge
6. Select the scan settings you want to change:
• [Resolution]
• [File Type]
• [Scan Type]
• [Document Size]
• [Scan Settings]
• [ADF Auto Deskew](available for certain models)
• [Remove Background Color]
73
(available only for the [Color]and [Gray]options.)
7. Press [OK].
8. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Related Information
Related Topics:
74
Scan to Email Attachment
Send a scanned document as an email attachment.
•
•
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software (Windows) or Brother iPrint&Scan (Mac).
The Scan to Email feature does not support Webmail services. Use the Scan to Image or Scan to File
feature to scan a document or a picture, and then attach the scanned file to an email message.
The machine scans to your default email client.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to PC]option, and then press OK.
4. Press a or b to select the [E-mail]option, and then press OK.
5. If the machine is connected over the network, press a or b to select the destination computer.
6. Press OK.
If the LCD prompts you to enter a PIN, enter the four digit PIN for the destination computer on the LCD and
then press OK.
7. Do one of the following:
•
To change the scan settings for this document, press Options or Copy/Scan Options and then go to the
next step.
•
To use the default scan settings, press Start.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
•
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
8. Select the scan settings you want to change:
• [Scan Type]
• [Resolution]
75
• [File Type]
• [Document Size]
• [ADF Auto Deskew](available for certain models)
• [Remove Bkg. Clr]
(available only for the [Color]and [Gray]options.)
9. Press OK.
10. Press Start.
The machine scans the document and saves it as a file attachment. It then launches your email application
and opens a new, blank email message with the scanned file attached.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press [Scan]> [to PC]> [to E-mail].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD and then press
[OK].
4. Do one of the following:
•
•
To change the scan settings, press [Options], and then go to the next step.
To use the default scan settings, press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
In order to change scan settings, Brother's ControlCenter software must be installed on a computer
connected to the machine.
5. To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
Press [2-sided Scan], and then select the document type.
•
Option
2-sided Scan: Long Edge
Description
2-sided Scan: Short Edge
6. Select the scan settings you want to change:
• [Resolution]
• [File Type]
• [Scan Type]
76
• [Document Size]
• [Scan Settings]
• [ADF Auto Deskew](available for certain models)
• [Remove Background Color]
(available only for the [Color]and [Gray]options.)
7. Press [OK].
8. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Related Information
Related Topics:
77
FTP Profile
Set up a Scan to FTP Profile
Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Set up a Scan to FTP Profile to scan and upload the scanned data directly to an FTP location.
We recommend Microsoft Internet Explorer 11/Edge for Windows and Safari 9/10 for Mac. Make sure that
JavaScript and Cookies are always enabled in whichever browser you use.
1. Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.168.1.2
No password is required by default. If you have previously set a password, type it, and then click
2. Click the Scan tab.
.
3. Click the Scan to FTP/Network menu in the left navigation bar.
4. Select the FTP option, and then click Submit.
79
5. Click the Scan to FTP/Network Profile menu in the left navigation bar.
6. Select the profile you want to set up or change.
7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The
machine will display this name on the LCD.
8. In the Host Address field, type the Host Address (for example: ftp.example.com; up to 64 characters) or the
IP address (for example: 192.23.56.189).
9. Change the Port Number setting used to access the FTP server. The default for this setting is port 21. In
most cases this setting does not need to be changed.
10. In the Username field, type a user name (up to 32 characters) that has permission to write data to the FTP
server.
11. In the Password field, type the password (up to 32 characters) associated with the user name you entered in
the Username field. Type the password again in the Retype password field.
12. In the Store Directory field, type the path to the folder on the FTP server where you want to send your
scanned data. Do not type a slash mark at the beginning of the path (see example).
80
13. Click the File Name drop-down list, and then select a file name prefix from the preset names provided, or
from user-defined names. The file name used for the scanned document will be the file name prefix you
select, followed by the last six digits of the flatbed/ADF scanner counter and the file extension (for example:
"Estimate_098765.pdf").
14. Click the Quality drop-down list, and then select a quality setting. If you choose the User Select option, the
machine will prompt users to select a setting each time they use the scan profile.
15. Click the File Type drop-down list, and then select the file type you want to use for the scanned document. If
you choose the User Select option, the machine will prompt users to select a setting each time they use the
scan profile.
16. Click the Document Size drop-down list, and then select your document size from the list. This is necessary
to make sure the scanned file is the correct size.
17. Click the File Size drop-down list, and then select your file size from the list.
18. Click the Remove Background Color drop-down list, and then select the level from the list. You can use this
feature to remove the background color of documents to make the scanned data more legible.
19. Set the Passive Mode option to off or on depending on your FTP server and network firewall configuration.
The default setting is on. In most cases this setting does not need to be changed.
20. Click Submit.
Using the following characters: ?, /, \, ", :, <, >, | or * may cause a sending error.
Related Information
81
Data to an FTP Server
Upload Scanned Data to an FTP Server
Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Share scanned information by saving it to your FTP server.
1. Load your document.
2. Press [Scan]> [to FTP].
3. Press a or b to select one of the network server profiles listed. If the profile is not complete (for example, if the
logon account name and password are missing, or if the quality or file type is not specified), you will be
prompted to enter any missing information.
4. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Related Information
82
up a Scan to Network Profile
Set up a Scan to Network Profile
Related Models: MFC-L2750DW/MFC-L2750DWXL
Set up a Scan to Network Profile to scan and upload scanned data directly to a folder on a CIFS server.
We recommend Microsoft Internet Explorer 11/Edge for Windows and Safari 9/10 for Mac. Make sure that
JavaScript and Cookies are always enabled in whichever browser you use.
1. Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.168.1.2
No password is required by default. If you have previously set a password, type it, and then click
2. Click the Scan tab.
.
3. Click the Scan to FTP/Network menu in the left navigation bar.
4. Select the Network option, and then click Submit.
84
5. Click the Scan to FTP/Network Profile menu in the left navigation bar.
6. Select the profile you want to set up or change.
7. In the Profile Name field, type a name for this server profile (up to 15 alphanumeric characters). The
machine will display this name on the LCD.
8. In the Network Folder Path field, type the path to the folder on the CIFS server where you want to send your
scanned data.
9. Click the File Name drop-down list, and then select a file name prefix from the preset names provided, or
from user-defined names. The file name used for the scanned document will be the file name prefix you
select, followed by the last six digits of the flatbed/ADF scanner counter and the file extension (for example:
"Estimate_098765.pdf").
10. Click the Quality drop-down list, and then select a quality setting. If you choose the User Select option, the
machine will prompt users to select a setting each time they use the scan profile.
11. Click the File Type drop-down list, and then select the file type you want to use for the scanned document. If
you choose the User Select option, the machine will prompt users to select a setting each time they use the
scan profile.
85
12. Click the Document Size drop-down list, and then select your document size from the list. This is necessary
to make sure the scanned file is the correct size.
13. Click the File Size drop-down list, and then select your file size from the list.
14. Click the Remove Background Color drop-down list, and then select the level from the list. You can use this
feature to remove the background color of documents to make the scanned data more legible.
15. To PIN-protect this profile, in the Use PIN for Authentication field, select On.
16. If you selected On for the Use PIN for Authentication field, type a four-digit PIN in the PIN Code field.
17. To set your authentication method, select Auto, or NTLMv2 from the Auth. Method menu.
18. In the Username field, type a user name (up to 96 characters) that has permission to write data to the folder
specified in the Network Folder Path field. If the user name is part of a domain, enter the user name in one
of the following styles:
user@domain
domain\user
19. In the Password field, type the password (up to 32 characters) associated with the user name you entered in
the Username field. Type the password again in the Retype password field.
20. Click Submit.
Using the following characters: ?, /, \, ", :, <, >, | or * may cause a sending error.
21. You must configure the SNTP protocol (network time server) or you must set the date, time and time zone
correctly on the control panel for all authentication methods. The time must match the time used by the CIFS
Server.
Related Information
86
up a Scan to Network Profile > Set the Date and Time Using Web Based Management
Set the Date and Time Using Web Based Management
Make sure the date and time and the time zone settings are set correctly using Web Based Management or the
control panel, so the machine's time matches the time being used by the server providing authentication.
Ignore step 1, if you already have a Web Based Management window open.
1. Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.168.1.2
No password is required by default. If you have previously set a password, type it, and then click
2. Click the Administrator tab.
.
3. Click the Date&Time menu in the left navigation bar.
4. In the Date fields, enter the date.
5. Select the clock type from the Clock Type field.
6. In the Time fields, enter the time.
7. Select the time difference between your location and UTC from the Time Zone drop-down list, for example,
the time zone for Eastern time in the USA and Canada is UTC-05:00.
8. In the Auto Daylight field, click On to set the machine to change automatically for Daylight Saving Time. It
will reset itself forward one hour in the spring, and back one hour in the fall (available only for some
countries).
9. Click Submit.
Related Information
87
(Windows) > Upload Scanned Data to a CIFS Server
Upload Scanned Data to a CIFS Server
Related Models: MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press [Scan]> [to Network].
3. The server profiles you have set up using Web Based Management are listed. Select the profile you want. If
the profile is not complete (for example, if the logon account name and password are missing, or if the quality
or file type is not specified), you will be prompted to enter any missing information.
4. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Related Information
88
Your Network (Windows 7, Windows 8 and Windows 10)
Web Services for Scanning on Your Network (Windows 7, Windows 8
and Windows 10)
The Web Services protocol enables Windows 7, Windows 8 and Windows 10 users to scan using a Brother
machine on the network. You must install the driver via Web Services.
89
Scanning (Windows 7, Windows 8, and Windows 10)
Use Web Services to Install Drivers Used for Scanning (Windows 7,
Windows 8, and Windows 10)
Use Web Services to monitor printers on the network.
•
•
Make sure you have installed the Brother software and drivers.
Verify that the host computer and the Brother machine are on the same subnet, or that the router is
correctly configured to pass data between the two devices.
•
You must configure the IP address on your Brother machine before you configure this setting.
1. Do one of the following:
•
Windows 7
Click
(Start) > Control Panel > Network and Internet > View network computers and devices.
The machine's Web Services Name appears with the printer icon.
Right-click the machine you want to install.
Windows 8
•
•
•
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Change PC settings > Devices > Add a device.
The machine's Web Services Name appears.
Windows 8.1
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Change PC settings > PC and devices > Devices > Add a device.
The machine's Web Services Name appears.
Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
•
•
The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet
Address) of your machine (for example, Brother MFC-XXXX (model name) [XXXXXXXXXXXX] (MAC
Address / Ethernet Address)).
Windows 8/Windows 10
Move your mouse over the machine name to display the machine's information.
2. Do one of the following:
•
Windows 7
Click Install in the displayed menu.
•
Windows 8/Windows 10
Select the machine you want to install, and then follow the on-screen instructions.
To uninstall drivers, click Uninstall or
(Remove device).
Related Information
90
Machine (Windows 7, Windows 8 and Windows 10)
Scan Using Web Services from the Brother Machine (Windows 7,
Windows 8 and Windows 10)
If you have installed the driver for scanning via Web Services, you can access the Web Services scanning menu
on your Brother machine's LCD.
Certain characters in the messages displayed on the LCD may be replaced with spaces if the language
settings of your OS and your Brother machine are different.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Web Service]option, and then press OK.
4. Press a or b to select the type of scan you want to do, and then press OK.
5. Press a or b to select the destination computer where you want to send the scan, and then press OK.
6. Press Start.
The machine starts scanning.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press [Scan]> [WS Scan].
3. Press a or b to display the scan options, and then press the type of scan.
4. Press a or b to display the computer name where you want to send data, and then press the computer name.
5. Press [Start].
The machine starts scanning.
Related Information
91
Configure Scan Settings for Web Services
1. Do one of the following:
•
Windows 7
Click
(Start) > Devices and Printers.
•
Windows 8
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings,
and then click Control Panel. In the Hardware and Sound group, click View devices and printers.
•
Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click View devices
and printers.
2. Right-click the machine icon, and then select Scan profiles.... The Scan Profiles dialog box appears.
3. Select the scan profile you want to use.
4. Make sure the scanner selected in the Scanner list is a Brother machine that supports Web Services for
scanning, and then click the Set as Default button.
5. Click Edit....
The Edit Default Profile dialog box appears.
6. Select the Source, Paper size, Color format, File type, Resolution (DPI), Brightness and Contrast
settings.
7. Click the Save Profile button.
These settings will be applied when you scan using the Web Services protocol.
If you are requested to select a scanning application, select Windows Fax and Scan from the list.
Related Information
92
ControlCenter4 (Windows)
Change Scan Button Settings from ControlCenter4 (Windows)
1. Click the
(ControlCenter4) icon in the task tray, and then click Open.
2. Click the Device Settings tab.
3. Click the Device Scan Settings button.
The Device Scan Settings dialog box appears.
4. Click the tab for the Scan to action you want to change (Image, OCR, E-mail, or File).
5. Change the settings as needed.
6. Click OK.
Each tab represents one of the scanning destinations, as outlined in the table below.
Change your Scan to settings by clicking on the corresponding tab and customizing the setting you want.
Tab Name
Image
OCR
Corresponding Feature
Scan to Image
Scan to OCR
E-mail
File
Scan to Email
Scan to File
93
Settings
Applicable Features
Image
Yes
Yes
-
OCR
Yes
Yes
Yes
Yes
Yes
-
E-mail
Yes
-
File
Yes
-
File Type
Target Application
OCR Language
File Name
-
-
Yes
Yes
-
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Destination Folder or Scan Location
Show Save As Window
Show Folder
-
-
-
File Size Priority
Resolution
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Scan Type
Document Size
Brightness
Contrast
ID Card Scan
Advanced Settings
Default
File Type
Select the file type you want to use for the scanned data.
Target Application
Select the destination application from the drop-down list.
OCR Language
Set the OCR language to match the language of the scanned document's text.
File Name
Click Change to change the file name's prefix.
Destination Folder
Click the folder icon to browse and select the folder where you want to save your scanned documents.
Scan Location
Select the Folder or SharePoint radio button to specify the destination where you want to save your scanned
documents.
Show Save As Window
Select this option to specify the scanned image's destination every time you scan.
Show Folder
Select this option to automatically display the destination folder after scanning.
File Size Priority
Adjust the data compression ratio of the scanned image. Change the file size by moving the File Size Priority
slider to the right or left.
Resolution
Select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
Scan Type
Select from a range of scan color depths.
94
•
Auto
Use for any type of document. This mode automatically picks an appropriate color depth for the
document.
•
•
Black & White
Use for text or line art images.
Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray
images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.)
•
•
True Gray
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of gray.
24bit Color
Use to create an image with the most accurate color reproduction. This mode uses up to 16.8 million
colors to scan the image, but it requires the most memory and has the longest transfer time.
Document Size
Select the exact size of your document from the Document Size drop-down list.
•
If you select the 1 to 2 (A4) option, the scanned image will be divided into two A5-size documents.
Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark,
set a higher brightness level and scan the document again. You can also type a value into the field to set the
Brightness level.
Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark
and light areas of the image, while a decrease reveals more details in gray areas. You can also type a value
into the field to set the Contrast level.
ID Card Scan
Select this check box to scan both sides of an identification card onto one page.
Advanced Settings
Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
•
Remove Bleed-through / Pattern
Remove Background Color
Remove the base color of documents to make the scanned data more legible.
•
•
•
•
Rotate Image
Rotate the scanned image.
Skip Blank Page
Remove the document's blank pages from the scanning results.
Display Scanning Results
Show the numbers of total pages saved and blank pages skipped on your computer screen.
ADF Auto Deskew
When scanning the document from the ADF, the machine corrects skewing of the document
automatically.
Default
Select this option to restore all settings to their factory setting values.
Related Information
95
Brother iPrint&Scan (Mac)
Change Scan Button Settings from Brother iPrint&Scan (Mac)
1. In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon.
The Brother iPrint&Scan screen appears.
2. If your Brother machine is not selected, click the Select your Machine button, and then follow the on-screen
instructions to select your Brother machine.
3. Click the Machine Scan Settings button, and then follow the on-screen instructions to change the scan
settings.
Related Information
Related Topics:
97
PDF
Configure Certificate for Signed PDF
If you select Signed PDF for Scan features, you must configure a certificate on your machine using Web Based
Management.
To use Signed PDF, you must install a certificate on your machine and your computer.
1. Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.168.1.2
No password is required by default. If you have previously set a password, type it, and then click
2. Click the Administrator tab.
.
3. Click the Signed PDF menu in the left navigation bar.
The Signed PDF configuration dialog box appears.
4. Click the Select the Certificate drop-down list, and then select the certificate.
5. Click Submit.
Related Information
98
Computer
Disable Scanning from Your Computer
You can disable the ability to scan from your computer. Set the pull scan setting using Web Based Management.
1. Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.168.1.2
No password is required by default. If you have previously set a password, type it, and then click
2. Click the Scan tab.
.
3. Click the Scan from PC menu in the left navigation bar.
4. In the Pull Scan field, click Disabled.
5. Click Submit.
Related Information
99
(Windows) > Scan Using ControlCenter4 Home Mode (Windows)
Scan Using ControlCenter4 Home Mode (Windows)
Select Home Mode as the mode setting for ControlCenter4.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Select the Document Type.
5. Change the document's Scan Size, if needed.
6. Click
(Scan).
The machine starts scanning, and the scanned image appears in the image viewer.
7. Click the left or right arrow buttons to preview each scanned page.
8. Crop the scanned image, if needed.
9. Do one of the following:
•
•
•
•
•
Click
Click
Click
Click
(Save) to save scanned data.
(Print) to print scanned data.
(Open with an Application) to open scanned data in another application.
(Send E-mail) to attach scanned data to an email.
(OCR) to convert your scanned document to an editable text file. (available only for certain
Click
models)
102
Related Information
103
ControlCenter4 Home Mode (Windows)
Select Document Type Using ControlCenter4 Home Mode (Windows)
•
Select the Document Type option that matches the type of original you want to scan.
Option
Description
Photo
600 x 600 dpi 24bit Color
300 x 300 dpi 24bit Color
Text and Graph
Monochrome Text 200 x 200 dpi Black & White
Custom 300 x 300 dpi (24bit Color as default) Select the scan settings you want from the
Custom Settings button.
Related Information
104
ControlCenter4 Home Mode (Windows) > Custom Scan Settings (Windows)
Custom Scan Settings (Windows)
Select Custom in the Document Type list to change advanced scan settings.
•
Select Custom, and then click the Custom Settings button.
The Custom Scan Settings dialog box appears.
You can change the following settings:
Resolution
Select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory
and transfer time, but produce a finer scanned image.
Scan Type
Select from a range of scan color depths.
-
Auto
Use for any type of document. This mode automatically picks an appropriate color depth for the
document.
-
-
Black & White
Use for text or line art images.
Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray
images without using true gray dots. Black dots are put in a specific pattern to give a gray
appearance.)
-
-
True Gray
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of gray.
24bit Color
Use to create an image with the most accurate color reproduction. This mode uses up to 16.8
million colors to scan the image, but it requires the most memory and has the longest transfer time.
105
Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too
dark, set a higher brightness level and scan the document again. You can also type a value into the field to
set the Brightness level.
Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes
dark and light areas of the image, while a decrease reveals more details in gray areas. You can also type a
value into the field to set the Contrast level.
Continuous Scanning
Select this option to scan multiple pages. After a page is scanned, select either continue scanning or
finish.
2-sided Scanning
Select this check box to scan both sides of the document. When using the Automatic 2-sided Scan
feature, you must select the Long-edge binding or Short-edge binding option, depending on the layout
of your original, to make sure the data file you create appears correctly.
(MFC-L2750DW/MFC-L2750DWXL)
ID Card Scan
Select this check box to scan both sides of an identification card onto one page.
Advanced Settings
Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
-
Remove Bleed-through / Pattern
•
Remove Background Color
Remove the base color of documents to make the scanned data more legible.
-
-
-
-
Rotate Image
Rotate the scanned image.
Skip Blank Page
Remove the document's blank pages from the scanning results.
Display Scanning Results
Show the numbers of total pages saved and blank pages skipped on your computer screen.
ADF Auto Deskew
When scanning the document from the ADF, the machine corrects skewing of the document
automatically.
Related Information
106
ControlCenter4 Home Mode (Windows)
Crop a Scanned Image Using ControlCenter4 Home Mode (Windows)
The crop tool on the Image Editing Toolbar lets you trim unwanted areas from your scanned image. Use the
Zoom In and Zoom Out tools to help view the image to be cropped.
Image Editing Toolbar
1. Restart
Cancels all the edits applied to the selected image. The edited image returns to its original state.
2. Fit to Window
Displays the scanned image so that the entire image fits in the window.
3. Zoom In
Zooms in on the scanned image.
4. Zoom Out
Zooms out of the scanned image.
5. Crop and Edit
Removes the outer parts of the image. Click the Crop and Edit button, and then change the frame to contain
the area you want to keep after cropping.
6. Page Counter
Indicates the page number of the scanned page currently shown in the image viewer. To display a different
page, select the desired page number from the drop-down page number list.
If you have scanned multiple pages, you can see the next or previous scanned page by clicking the left or
right arrow buttons in the preview window.
1. Scan a document.
2. Click
(Crop and Edit) to edit the scanned image.
The Crop and Edit - ControlCenter4 window appears.
108
a. Expands the scanned image so that the entire image fits in the window.
b. Zooms in on the image.
c. Zooms out of the image.
d. Rotates the image counter-clockwise 90 degrees.
e. Rotates the image clockwise 90 degrees.
f. Click and drag the frame to adjust the area to be cropped.
3. Click OK.
The edited image appears in the image viewer.
Related Information
109
Home Mode (Windows)
Print Scanned Data Using ControlCenter4 Home Mode (Windows)
Scan a document on your Brother machine, and then print copies using the printer driver features that are
available in ControlCenter4.
1. Scan a document.
2. Click Print.
a. Shows which images are currently selected.
b. Click the Properties button to change specific printer settings.
c. Select the Paper Size, Media Type and Layout options. The current settings are enclosed in a blue
square.
3. Configure the print settings, and then click the Start Printing button.
Related Information
110
ControlCenter4 Home Mode (Windows)
Scan to an Application Using ControlCenter4 Home Mode (Windows)
The Open with an Application button lets you scan an image directly into your graphics application for editing.
Select Home Mode as the mode setting for ControlCenter4.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Select the Document Type.
5. Change the size of your document, if needed.
6. Click
(Scan).
The machine starts scanning, and the scanned image appears in the image viewer.
7. Click the left or right arrow buttons to preview each scanned page.
8. Crop the scanned image, if needed.
9. Click the Open with an Application button.
10. Select the application from the drop-down list, and then click OK.
The image opens in the application you have selected.
Related Information
111
(Windows) > Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Home Mode (Windows)
Save Scanned Data to a Folder as a PDF File Using ControlCenter4
Home Mode (Windows)
Select Home Mode as the mode setting for ControlCenter4.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Select the Document Type.
5. Change the size of your document, if needed.
6. Click
(Scan).
The machine starts scanning, and the scanned image appears in the image viewer.
7. Click the left or right arrow buttons to preview each scanned page.
8. Click Save.
The Save dialog box appears.
9. Click the File Type drop-down list, and then select a PDF file.
112
To save the document as a password-protected PDF, select Secure PDF Single-Page (*.pdf) or Secure
PDF Multi-Page (*.pdf) from the File Type drop-down list, click
, and then type the password.
10. To change the file name, click the Change button, if needed.
11. Click the folder icon to browse and select the folder where you want to save your scanned documents.
12. Click OK.
The scanned document is saved to the destination folder as a PDF.
Related Information
113
(Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Home Mode (Windows)
Scan Both Sides of a Document Automatically Using ControlCenter4
Home Mode (Windows)
Related Models: MFC-L2750DW/MFC-L2750DWXL
Select Home Mode as the mode setting for ControlCenter4.
1. Load documents in the ADF.
To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Under Document Type, select Custom, and then click the Custom Settings button.
The Custom Scan Settings dialog box appears.
5. Select the 2-sided Scanning check box.
6. Select the Long-edge binding or Short-edge binding option, depending on the Original layout.
7. Configure other Custom Scan Settings, if needed.
8. Click OK.
9. Click
(Scan).
The machine starts scanning, and the scanned image appears in the image viewer.
10. Click the left or right arrow buttons to preview each scanned page.
11. Do one of the following:
•
Click
(Save) to save scanned data.
114
•
•
•
•
Click
Click
Click
(Print) to print scanned data.
(Open with an Application) to open scanned data in another application.
(Send E-mail) to attach scanned data to an email.
Click
(OCR) to convert your scanned document to an editable text file. (available only for certain
models)
Related Information
115
(Windows) > Scan Settings for ControlCenter4 Home Mode (Windows)
Scan Settings for ControlCenter4 Home Mode (Windows)
Settings
Applicable Features
Open with an Application OCR Send E-mail Save
File Type
-
Yes Yes
Yes
-
Target Application Yes
Yes
-
OCR Language
File Name
-
-
-
-
-
Yes
-
-
-
-
-
-
-
Yes
Yes
Yes
Yes
Scan Location
Show Folder
File Size Priority
-
-
Yes
File Type
Select the file type you want to use for the scanned data.
For Send E-mail and Save
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Windows Bitmap (*.bmp)
JPEG (*.jpg) (recommended for most users when scanning pictures)
TIFF Single-Page (*.tif)
TIFF Multi-Page (*.tif)
Portable Network Graphics (*.png)
PDF Single-Page (*.pdf) (recommended for scanning and sharing documents)
PDF Multi-Page (*.pdf) (recommended for scanning and sharing documents)
PDF/A Single-Page (*.pdf) (recommended for scanning and sharing documents)
PDF/A Multi-Page (*.pdf) (recommended for scanning and sharing documents)
High Compression PDF Single-Page (*.pdf)
High Compression PDF Multi-Page (*.pdf)
Secure PDF Single-Page (*.pdf)
Secure PDF Multi-Page (*.pdf)
Searchable PDF Single-Page (*.pdf)
Searchable PDF Multi-Page (*.pdf)
XML Paper Specification (*.xps) (the XML Paper Specification is available for Windows 7, Windows 8
and Windows 10, and when using applications that support XML Paper Specification files)
•
•
•
Microsoft Office Word (*.docx) (Available only for certain models)
Microsoft Office PowerPoint (*.pptx) (Available only for certain models)
Microsoft Office Excel (*.xlsx)(Available only for certain models)
For OCR
•
•
•
•
•
•
•
•
•
HTML 3.2 (*.htm)
HTML 4.0 (*.htm)
Microsoft Excel 2003, XP (*.xls)
RTF Word 2000 (*.rtf)
WordPad (*.rtf)
WordPerfect 9, 10 (*.wpd)
Text (*.txt)
Searchable PDF Single-Page (*.pdf)
Searchable PDF Multi-Page (*.pdf)
116
Target Application
Select the destination application from the drop-down list.
OCR Language
Set the optical character recognition (OCR) language to match the language of the scanned document's text.
File Name
Click Change to change the file name's prefix.
Scan Location
Select the Folder or SharePoint radio button to specify the destination where you want to save your scanned
documents.
Show Folder
Select this option to automatically display the destination folder after scanning.
File Size Priority
Adjust the data compression ratio of the scanned image. Change the file size by moving the File Size Priority
slider to the right or left.
Custom Settings
Select the Custom option, click the Custom Settings button, and then change settings.
Scan Size
Select the exact size of your document from the Scan Size drop-down menu.
Related Information
117
(Windows) > Scan Photos and Graphics Using ControlCenter4 Advanced Mode (Windows)
Scan Photos and Graphics Using ControlCenter4 Advanced Mode
(Windows)
Send scanned photos or graphics directly to your computer.
Select Advanced Mode as the mode setting for ControlCenter4.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Click the Image button.
The scan settings dialog box appears.
119
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed.
•
•
•
To change the file name, click Change.
To change Destination Folder, click the folder icon.
To preview and configure the scanned image, select the PreScan check box.
6. Click Scan.
The machine starts scanning. The image opens in the application you have selected.
Related Information
120
(Windows) > Save Scanned Data to a Folder as a PDF File Using ControlCenter4 Advanced Mode (Windows)
Save Scanned Data to a Folder as a PDF File Using ControlCenter4
Advanced Mode (Windows)
Scan documents and save them to a folder on your computer as PDF files.
Select Advanced Mode as the mode setting for ControlCenter4.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
121
4. Click the File button.
The scan settings dialog box appears.
5. Click the File Type drop-down list, and then select a PDF file.
To save the document as a password-protected PDF, select Secure PDF Single-Page (*.pdf) or Secure
PDF Multi-Page (*.pdf) from the File Type drop-down list, click
, and then type the password.
6. Click the folder icon to browse and select the folder where you want to save your scanned documents.
7. Change the scan settings, such as file format, file name, resolution and color, if needed.
To preview and configure the scanned image, select the PreScan check box.
8. Click Scan.
The machine starts scanning. The file is saved in the folder you selected.
Related Information
122
(Windows) > Scan Both Sides of a Document Automatically Using ControlCenter4 Advanced Mode
(Windows)
Scan Both Sides of a Document Automatically Using ControlCenter4
Advanced Mode (Windows)
Related Models: MFC-L2750DW/MFC-L2750DWXL
Select Advanced Mode as the mode setting for ControlCenter4.
1. Load documents in the ADF.
To scan both sides of a document automatically, you must use the ADF, not the flatbed scanner glass.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Click the button for the setting you want to change (Image, OCR, E-mail, or File).
The scan settings dialog box appears.
5. Select the 2-sided Scanning check box.
6. Select the Long-edge binding or Short-edge binding option, depending on the Original layout.
7. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed.
•
•
To change the file name, click Change.
To change Destination Folder, click the folder icon.
8. Click Scan.
The machine starts scanning.
You have now changed the default settings for your selected Scan to action. These settings will be used the next
time one of the scan options (Image, OCR, E-mail, or File) is selected for this action.
Related Information
123
(Windows) > Scan Both Sides of an ID Card Using ControlCenter4 Advanced Mode (Windows)
Scan Both Sides of an ID Card Using ControlCenter4 Advanced Mode
(Windows)
Select Advanced Mode as the mode setting for ControlCenter4.
1. Place an ID card on the scanner glass.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
124
4. Click the File button.
The scan settings dialog box appears.
5. Select the ID Card Scan check box.
The instruction dialog box appears.
6. Read the instructions on the screen, and then click OK.
7. Change the scan settings, such as file format, file name, scan location, resolution and color, if needed.
8. Click Scan.
The machine starts scanning one side of the identification card.
9. After the machine has scanned one side, turn over the identification card, and then click Continue to scan
the other side.
10. Click Finish.
Related Information
125
(Windows) > Scan to Email Attachment Using ControlCenter4 Advanced Mode (Windows)
Scan to Email Attachment Using ControlCenter4 Advanced Mode
(Windows)
Send a scanned document as an email attachment.
•
•
Select Advanced Mode as the mode setting for ControlCenter4.
The Scan to Email feature does not support Webmail services. Use the Scan to Image or Scan to File
feature to scan a document or a picture, and then attach the scanned file to an email message.
The machine scans to your default email client.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Click the E-mail button.
The scan settings dialog box appears.
126
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed.
•
•
•
To change the file name, click Change.
To change Destination Folder, click the folder icon.
To preview and configure the scanned image, select the PreScan check box.
6. Click Scan.
The machine starts scanning. Your default email application opens and the scanned image is attached to a
new, blank email message.
Related Information
127
Scan to an Editable Text File (OCR) Using ControlCenter4 Advanced
Mode (Windows)
Your machine can convert characters in a scanned document to text using optical character recognition (OCR)
technology. You can edit this text using your preferred text-editing application.
ABC
C
B
A
•
Select Advanced Mode as the mode setting for ControlCenter4.
1. Load your document.
2. Click the
(ControlCenter4) icon in the task tray, and then click Open.
3. Click the Scan tab.
4. Click the OCR button.
The scan settings dialog box appears.
128
5. Change the scan settings, such as file format, file name, destination folder, resolution and color, if needed.
•
•
•
To change the file name, click Change.
To change Destination Folder, click the folder icon.
To preview and configure the scanned image, select the PreScan check box.
6. Click Scan.
The machine scans the document, converts it to editable text, and then sends it to your default word
processing application.
Related Information
129
(Windows) > Scan Settings for ControlCenter4 Advanced Mode (Windows)
Scan Settings for ControlCenter4 Advanced Mode (Windows)
Settings
Applicable Features
Image
Yes
Yes
-
OCR
Yes
Yes
Yes
Yes
Yes
-
E-mail
Yes
-
File
Yes
-
File Type
Target Application
OCR Language
File Name
-
-
Yes
Yes
-
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Scan Location or Destination Folder
Show Folder
Show Save As Window
File Size Priority
PreScan
-
-
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Resolution
Scan Type
Document Size
Brightness
Contrast
Continuous Scanning
2-sided Scanning
ID Card Scan
Advanced Settings
Default
File Type
Select the file type you want to use for the scanned data.
For Image, Email and File
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Windows Bitmap (*.bmp)
JPEG (*.jpg) (recommended for most users when scanning pictures)
TIFF Single-Page (*.tif)
TIFF Multi-Page (*.tif)
Portable Network Graphics (*.png)
PDF Single-Page (*.pdf) (recommended for scanning and sharing documents)
PDF Multi-Page (*.pdf) (recommended for scanning and sharing documents)
PDF/A Single-Page (*.pdf) (recommended for scanning and sharing documents)
PDF/A Multi-Page (*.pdf) (recommended for scanning and sharing documents)
High Compression PDF Single-Page (*.pdf)
High Compression PDF Multi-Page (*.pdf)
Secure PDF Single-Page (*.pdf)
Secure PDF Multi-Page (*.pdf)
Searchable PDF Single-Page (*.pdf)
Searchable PDF Multi-Page (*.pdf)
130
•
XML Paper Specification (*.xps) (the XML Paper Specification is available for Windows 7, Windows 8
and Windows 10, and when using applications that support XML Paper Specification files)
For Email and File
•
•
•
Microsoft Office Word (*.docx) (Available only for certain models)
Microsoft Office PowerPoint (*.pptx) (Available only for certain models)
Microsoft Office Excel (*.xlsx)(Available only for certain models)
For OCR
•
•
•
•
•
•
•
•
•
HTML 3.2 (*.htm)
HTML 4.0 (*.htm)
Microsoft Excel 2003, XP (*.xls)
RTF Word 2000 (*.rtf)
WordPad (*.rtf)
WordPerfect 9, 10 (*.wpd)
Text (*.txt)
Searchable PDF Single-Page (*.pdf)
Searchable PDF Multi-Page (*.pdf)
Target Application
Select the destination application from the drop-down list.
OCR Language
Set the OCR language to match the language of the scanned document's text.
File Name
Click Change to change the file name's prefix.
Scan Location
Select the Folder or SharePoint radio button to specify the destination where you want to save your scanned
documents.
Destination Folder
Click the folder icon to browse and select the folder where you want to save your scanned documents.
Show Folder
Select this option to automatically display the destination folder after scanning.
Show Save As Window
Select this option to specify the scanned image's destination every time you scan.
File Size Priority
Adjust the data compression ratio of the scanned image. Change the file size by moving the File Size Priority
slider to the right or left.
PreScan
Select PreScan to preview your image and crop unwanted portions before scanning.
Resolution
Select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
Scan Type
Select from a range of scan color depths.
•
Auto
Use for any type of document. This mode automatically picks an appropriate color depth for the
document.
131
•
•
Black & White
Use for text or line art images.
Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray
images without using true gray dots. Black dots are put in a specific pattern to give a gray appearance.)
•
•
True Gray
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of gray.
24bit Color
Use to create an image with the most accurate color reproduction. This mode uses up to 16.8 million
colors to scan the image, but it requires the most memory and has the longest transfer time.
Document Size
Select the exact size of your document from the Document Size drop-down list.
•
If you select the 1 to 2 (A4) option, the scanned image will be divided into two A5-size documents.
Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark,
set a higher brightness level and scan the document again. You can also type a value into the field to set the
Brightness level.
Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark
and light areas of the image, while a decrease reveals more details in gray areas. You can also type a value
into the field to set the Contrast level.
Continuous Scanning
Select this option to scan multiple pages. After a page is scanned, select either continue scanning or finish.
2-sided Scanning
Select this check box to scan both sides of the document. When using the Automatic 2-sided Scan feature,
you must select the Long-edge binding or Short-edge binding option, depending on the layout of your
original, to make sure the data file you create appears correctly.
(MFC-L2750DW/MFC-L2750DWXL)
ID Card Scan
Select this check box to scan both sides of an identification card onto one page.
Advanced Settings
Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
•
Remove Bleed-through / Pattern
-
Remove Background Color
Remove the base color of documents to make the scanned data more legible.
•
•
•
•
Rotate Image
Rotate the scanned image.
Skip Blank Page
Remove the document's blank pages from the scanning results.
Display Scanning Results
Show the numbers of total pages saved and blank pages skipped on your computer screen.
ADF Auto Deskew
When scanning the document from the ADF, the machine corrects skewing of the document
automatically.
132
Default
Select this option to restore all settings to their factory setting values.
Related Information
133
™
™
Windows Applications
™
™
Scan Using Nuance PaperPort 14SE or Other Windows Applications
™
™
You can use the Nuance PaperPort 14SE application for scanning.
™
™
•
To download the Nuance PaperPort 14SE application, click
(Brother Utilities), select Do More in
the left navigation bar, and then click PaperPort.
™
™
•
•
Nuance PaperPort 14SE supports Windows 7, Windows 8, Windows 8.1 and Windows 10.
For detailed instructions on using each application, click the application's Help menu, and then click
Getting Started Guide in the Help ribbon.
™
The instructions for scanning in these steps are for PaperPort 14SE. For other Windows applications, the
™
steps will be similar. PaperPort 14SE supports both TWAIN and WIA drivers; the TWAIN driver
(recommended) is used in these steps.
1. Load your document.
™
2. Start PaperPort 14SE.
Do one of the following:
•
Windows 7
Using your computer, click
Windows 8
(Start) > All Programs > Nuance PaperPort 14 > PaperPort.
•
•
Click
Windows 10
Click Nuance PaperPort 14 > PaperPort.
(PaperPort).
3. Click the Desktop menu, and then click Scan Settings in the Desktop ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
4. From the available Scanners list, select TWAIN: TW-Brother XXX-XXXX or TWAIN: TW-Brother XXX-XXXX
LAN (where XXX-XXXX is the model name of your machine). To use the WIA driver, select the Brother driver
that has "WIA" as the prefix.
5. Select the Display scanner dialog box check box in the Scan or Get Photo panel.
6. Click Scan.
The Scanner Setup dialog box appears.
134
7. Adjust the settings in the Scanner Setup dialog box, if needed.
8. Click the Document Size drop-down list, and then select your document size.
To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
Automatic 2-sided scan is available only when using the ADF.
You cannot use PreScan to preview an image.
9. Click PreScan if you want to preview your image and crop unwanted portions before scanning.
10. Click Start.
The machine starts scanning.
Related Information
135
Windows Applications > TWAIN Driver Settings (Windows)
TWAIN Driver Settings (Windows)
•
•
Note that the item names and assignable values will vary depending on the machine.
The Contrast option is available only when selecting the Gray (Error Diffusion), True Gray, or 24bit
Color options from the Scan Type settings.
1. Scan
Select the Photo, Web, or Text option depending on the type of document you want to scan.
Scan (Image Type)
Resolution
Scan Type
24bit Color
24bit Color
Photo
Web
Use for scanning photo images. 300 x 300 dpi
Use for attaching the scanned
image to web pages.
100 x 100 dpi
Text
Use for scanning text
documents.
200 x 200 dpi
Black & White
2. Resolution
Select a scanning resolution from the Resolution drop-down list. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
3. Scan Type
Select from a range of scan color depths.
•
•
Black & White
Use for text or line art images.
Gray (Error Diffusion)
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray
images without using true gray dots. Black dots are put in a specific pattern to give a gray
appearance.)
•
•
True Gray
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of gray.
24bit Color
Use to create an image with the most accurate color reproduction. This mode uses up to 16.8 million
colors to scan the image, but it requires the most memory and has the longest transfer time.
136
4. Document Size
Select the exact size of your document from a selection of preset scan sizes.
If you select Custom, the Custom Document Size dialog box appears and you can specify the document
size.
5. Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too
dark, set a higher brightness level and scan the document again. You can also type a value in the field to set
the brightness level.
6. Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark
and light areas of the image, while a decrease reveals more details in gray areas. You can also type a value
in the field to set the contrast level.
7. 2-sided Scanning
Scan both sides of the document. When using the Automatic 2-sided Scan feature, you must select the
Long-edge binding or Short-edge binding option from the 2-sided Scanning drop-down list, so when you
turn the pages, they are facing the way you want.
(MFC-L2750DW/MFC-L2750DWXL)
8. Advanced Settings
Configure advanced settings by clicking the Advanced Settings button in the Scan Settings dialog box.
•
Paper Detection
-
-
Auto Deskew
Set the machine to correct document skewing automatically as the pages are scanned from the ADF.
Rotate Image
Rotate the scanned image.
•
Image Quality
-
Background Processing
•
•
Remove Bleed-through / Pattern
Prevent bleed-through.
Remove Background Color
Remove the base color of documents to make the scanned data more legible.
-
-
Color Drop
Select a color to remove from the scanned image.
Boldface Formatting
137
Emphasize the characters of the original by making them bold.
Blurred Character Correction
-
-
-
Correct the broken or incomplete characters of the original to make them easier to read.
Edge Emphasis
Make the characters of the original sharper.
Reduce Noise
Improve and enhance the quality of your scanned images with this selection. The Reduce Noise
option is available when selecting the 24bit Color option and the 300 x 300 dpi, 400 x 400 dpi, or
600 x 600 dpi scan resolution.
•
Page Control
-
Edge Fill
Fill in the edges on four sides of the scanned image using the selected color and range.
-
Continuous Scan
Select this option to scan multiple pages. After a page is scanned, select either continue scanning or
finish.
Related Information
138
Scan Using Windows Fax and Scan
Windows Fax and Scan application is another option that you can use for scanning.
•
•
Windows Fax and Scan uses the WIA scanner driver.
If you want to crop a portion of a page after pre-scanning the document, you must scan using the scanner
glass (also called the flatbed).
1. Load your document.
2. Launch Windows Fax and Scan.
3. Click File > New > Scan.
4. Select the scanner you want to use.
5. Click Import or OK.
The New Scan dialog box appears.
6. Adjust the settings in the Scanner Setup dialog box, if needed.
The scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher resolutions, use
the Scanner Utility software of Brother Utilities.
If your machine supports 2-sided Scan and you want to scan both sides of your document, select Feeder
(Scan both sides) as Source.
7. Click Scan.
The machine starts scanning the document.
Related Information
139
Settings (Windows)
WIA Driver Settings (Windows)
Paper source
Select the Document Feeder or Flatbed option from the drop-down list.
Picture Type (Image Type)
Select Color picture, Grayscale picture, Black and white picture or text, or Custom Settings for the type
of document you want to scan.
To change advanced settings, click the Adjust the quality of the scanned picture link.
Page size
The Page size option is available if you select the Document Feeder as the Paper source option.
Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too dark,
set a higher brightness level and scan the document again.
Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes dark
and light areas of the image, while a decrease reveals more details in gray areas. You can also type a value in
the field to set the contrast level.
Resolution (DPI)
Select a scanning resolution from the Resolution (DPI) list. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
140
Scan Using Brother iPrint&Scan (Mac)
1. In the Finder menu bar, click Go > Applications, and then double-click the iPrint&Scan icon.
The Brother iPrint&Scan screen appears.
2. If your Brother machine is not selected, click the Select your Machine button, and then follow the on-screen
instructions to select your Brother machine.
3. Click the Scan icon, and then follow the on-screen instructions to scan your documents.
Related Information
Related Topics:
143
Scan Using TWAIN-Compliant Applications (Mac)
You can also scan using TWAIN-compliant applications. For more information about the scanning procedure, see
the manual for your application.
To use Brother TWAIN Driver, go to your model's Downloads page on the Brother Solutions Center at
1. Start your graphics application, and then select the scan operation.
The scanner setup dialog box appears.
2. Change the scan settings, such as Resolution, Scan Type, or Adjust Image, if needed.
3. Click the Document Size pop-up menu, and then select your document size.
4. Click the PreScan option to preview your image and crop unwanted portions before scanning.
•
•
After you select a document size, adjust the scanning area by holding down the mouse button and
dragging your mouse pointer over the portion you want to scan.
To scan both sides of the document (MFC-L2750DW/MFC-L2750DWXL):
Automatic 2-sided scan is available only when using the ADF.
You cannot adjust the scanning area.
You cannot use PreScan to preview an image.
5. Click Start.
The machine starts scanning.
144
(Mac) > TWAIN Driver Settings (Mac)
TWAIN Driver Settings (Mac)
1
2
3
4
5
6
•
•
Item names and assignable values will vary depending on the machine.
The Contrast setting is available only when selecting Gray (Error Diffusion), True Gray, or 24bit
Color from the Scan Type options.
1. Resolution
Select a scanning resolution from the Resolution pop-up menu. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
2. Scan Type
Select from a range of scan color depths.
•
Black & White
Use for text or line art images.
Gray (Error Diffusion)
•
Use for photographic images or graphics. (Error Diffusion is a method for creating simulated gray
images without using true gray dots. Black dots are put in a specific pattern to give a gray
appearance.)
•
•
True Gray
Use for photographic images or graphics. This mode is more accurate because it uses up to 256
shades of gray.
24bit Color
Use to create an image with the most accurate color reproduction. This mode uses up to 16.8 million
colors to scan the image, but it requires the most memory and has the longest transfer time.
3. Document Size
Select the exact size of your document from a selection of preset scan sizes.
•
If you select Custom, you can specify the document size.
146
4. Adjust Image
Click the Adjust Image button to adjust other image qualities.
Brightness
Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. If the
scanned image is too light, set a lower brightness level and scan the document again. If the image is too
dark, set a higher brightness level and scan the document again. You can also type a value in the box to
set the brightness.
Contrast
Increase or decrease the Contrast level by moving the slider to the right or left. An increase emphasizes
dark and light areas of the image, while a decrease reveals more details in gray areas. You can also type a
value in the box to set the contrast.
Reduce Noise
Improve and enhance the quality of your scanned images with this selection. The Reduce Noise option is
available when selecting the 24bit Color option and the 300 x 300 dpi, 400 x 400 dpi, or 600 x 600 dpi
scan resolutions.
5. 2-sided Scanning
If you select this check box, the machine scans both sides of the document. When using the Automatic 2-
sided Scan feature, you must select the Long-edge binding or Short-edge binding option, depending on
the layout of your original, to make sure the created data file appears correctly.
(Available only for certain models)
6. Rotate Image
Rotate the scanned image.
Related Information
147
Web Based Management
Set the Scan File Name Using Web Based Management
Set up a file name for scanned data using Web Based Management.
1. Start your web browser.
Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the IP
address of the machine or the print server name). For example: http://192.168.1.2
No password is required by default. If you have previously set a password, type it, and then click
2. Click the Scan tab.
.
3. Click the Scan File Name menu in the left navigation bar.
4. Select the File Name Style from the drop-down list.
5. If you selected the option to include the date in File Name Style field, select the Date format from the drop-
down list.
6. In the Time fields, select On to include the time information in the file name.
7. In the Counter field, select Continuous or Reset after each job.
When you select Reset after each job, duplication of file names may occur.
8. If you want to create a user-defined file name prefix, type a file name in the user-defined fields of each scan
function.
Using the following characters: ?, /, \, or * may cause a sending error.
9. Click Submit.
Related Information
149
Copy a Document
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Make sure you have loaded the correct size paper in the paper tray.
2. Do one of the following:
•
Place the document face up in the ADF. (available only for certain models)
(If you are copying multiple pages, we recommend using the ADF.)
•
Place the document face down on the scanner glass.
3. Do one of the following:
•
For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
For DCP models
•
Press a or b to enter the number of copies you want.
The LCD displays:
Stack Copies:01
100%□□■□□
Auto
4. Press Start.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Make sure you have loaded the correct size paper in the paper tray.
151
2. Do one of the following:
• Place the document face up in the ADF.
(If you are copying multiple pages, we recommend using the ADF.)
•
Place the document face down on the scanner glass.
3. Press
([Copy]).
The LCD displays:
Copy
Options
Plain Paper
Letter
Start
4. To enter the number of copies you want, do one of the following:
•
•
Press [-]or [+]using the LCD.
Use the dial pad.
•
Press
to display a numeric keypad on the LCD, and then enter the number of copies. Press
[OK].
5. Press [Start].
Related Information
• Copy
152
Enlarge or Reduce Copied Images
Select an enlargement or reduction ratio to resize your copied data.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Do one of the following:
•
For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
For DCP models
•
Press a or b to enter the number of copies you want.
3. Press Options or Copy/Scan Options.
4. Press a or b to select [Enlarge/Reduce], and then press OK.
5. Press a or b to select the enlargement or reduction ratio you want, and then press OK.
•
If you select [Custom(25-400%)], use the dial pad, or press a or b to enter an enlargement or
reduction ratio from [25%]to [400%]and then press OK.
6. Press Start.
• [Auto]sets the machine to calculate the reduction ratio that best fits the size of paper.
• [Auto]is only available when using the ADF.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
([Copy]).
3. Enter the number of copies.
4. Press [Options].
5. Press a or b to display the [Enlarge/Reduce]option, and then press [Enlarge/Reduce].
6. Press a or b to display the available options, and then press the option you want to change.
7. Do one of the following:
•
If you select [Enlarge]or [Reduce], press the enlargement or reduction ratio you want to use.
153
•
•
If you select [Custom(25-400%)], press
(backspace) to erase the displayed percentage, or press
d to move the cursor, and then enter an enlargement or reduction ratio from [25%]to [400%].
Press [OK].
If you selected [100%]or the [Auto]option, go to the next step.
8. When finished, press [OK]. (If the [OK]button is displayed.)
9. Press [Start].
• [Auto]sets the machine to calculate the reduction ratio that best fits the size of paper.
• [Auto]is only available when using the ADF.
Related Information
• Copy
154
Make N in 1 Copies Using the Page Layout Feature
The N in 1 copy feature saves paper by copying two or four pages of your document onto one page of the copy.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Do one of the following:
•
For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
For DCP models
•
Press a or b to enter the number of copies you want.
3. Press Options or Copy/Scan Options.
4. Press a or b to select [Page Layout], and then press OK.
5. Press a or b to select [Off(1 in 1)], [2 in 1 (P)], [2 in 1 (L)], [4 in 1 (P)]or [4 in 1
(L)], and then press OK.
6. Press Start.
If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
7. Repeat the following steps for each page of the layout:
•
For MFC models
a. After the machine scans the page, press a to scan the next page.
b. Place the next page on the scanner glass, and then press OK to scan the page.
For DCP models
•
After the machine scans the page, place the next page on the scanner glass, and then press a to select
the [Yes]option.
8. After scanning all the pages, press b to select the [No]option.
155
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
([Copy]).
3. Enter the number of copies.
4. Press [Options].
5. Press a or b to display the [Page Layout]option, and then press [Page Layout].
6. Press a or b to display the options, and then press the option you want.
Option
Description
2in1(Portrait)
2in1(Landscape)
4in1(Portrait)
4in1(Landscape)
7. When finished, press [OK].
8. Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
9. After the machine scans the page, place the next page on the scanner glass, and then press [Yes]to scan
the next page.
10. When finished, press [No]to finish.
Related Information
• Copy
156
Sort Copies
Sort multiple copies. Pages will be stacked in the order they are fed, that is: 1, 2, 3, and so on.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Do one of the following:
•
For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
For DCP models
•
Press a or b to enter the number of copies you want.
3. Press Options or Copy/Scan Options.
4. Press a or b to select [Stack/Sort], and then press OK.
5. Press a or b to select [Sort], and then press OK.
6. Press Start.
If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
7. Repeat the following steps for each page:
•
For MFC models
a. After the machine scans the page, press a to scan the next page.
b. Place the next page on the scanner glass, and then press OK to scan the page.
For DCP models
•
After the machine scans the page, place the next page on the scanner glass, and then press a to select
the [Yes]option.
8. After scanning all the pages, press b to select the [No]option.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
([Copy]).
3. Enter the number of copies.
4. Press [Options].
5. Press a or b to display the [Stack/Sort]option, and then press [Stack/Sort].
6. Press [Sort].
7. When finished, press [OK].
8. Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
9. After the machine scans the page, place the next page on the scanner glass, and then press [Yes]to scan
the next page.
10. When finished, press [No]to finish.
157
Copy an ID Card
•
You may copy an identification card only to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. (For MFC models)
Press
(COPY).
2. Place an identification card face down near the upper left corner of the scanner glass.
1
1
0.16 in. (4.0 mm) or greater (top, left)
3. Press 2 in 1 (ID) Copy.
4. Do one of the following:
•
•
For MFC models
Use the dial pad to enter the number of copies you want.
For DCP models
Press a or b to enter the number of copies you want.
5. Press Start.
The machine scans one side of the identification card.
159
6. After the machine has scanned the first side, turn over the identification card.
7. Press Start to scan the other side.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Place your identification card face down near the upper left corner of the scanner glass.
1
1
0.16 in. (4.0 mm) or greater (top, left)
2. Press
[Copy]> [2 in 1 ID Copy].
3. Enter the number of copies.
4. Press [Start].
The machine scans one side of the identification card.
5. After the machine has scanned the first side, turn over the identification card and press [Continue]to scan
the other side.
Related Information
• Copy
160
Copy on Both Sides of the Paper (2-sided Copy)
Reduce the amount of paper you use by copying onto both sides of the paper.
•
•
•
•
•
You must choose a 2-sided copy layout from the following options before you can start 2-sided copying.
The layout of your original document determines which 2-sided copy layout you should choose.
To use the automatic 2-sided copy feature, you must load your document in the ADF.
When you manually make 2 sided copies from a 2-sided document, use the scanner glass.
Select Letter, Legal, Mexico Legal, India Legal or Folio sized paper when using the 2‑sided copy option.
Portrait
2–sided to 2–sided
1
1
2
2
1–sided to 2–sided (Long Edge Flip)
1
1
2
2
1–sided to 2–sided (Short Edge Flip)
1
1
2
2
Landscape
2–sided to 2–sided
1
1
2
2
1–sided to 2–sided (Long Edge Flip)
1
1
2
2
1–sided to 2–sided (Short Edge Flip)
1
1
2
2
161
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Load your document.
2. Do one of the following:
•
For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
For DCP models
•
Press a or b to enter the number of copies you want.
3. Do one of the following:
•
•
Press 2-sided.
Press Options or Copy/Scan Options.
Press a or b to select [2-sided], and then press OK.
4. Press a or b to display [Layout Long]or [Layout Short], and then press OK.
5. Select flip on long edge or flip on short edge.
6. Press a or b to display [2sided → 2sided]or [1sided → 2sided], and then press OK.
7. Press Start.
If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
8. Repeat the following steps for each page of the layout:
•
For MFC models
a. After the machine scans the page, press a to scan the next page.
b. Place the next page on the scanner glass, and then press OK to scan the page.
For DCP models
•
After the machine scans the page, place the next page on the scanner glass, and then press a to select
the [Yes]option.
9. Press b to select the [No]option.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
([Copy]).
3. Enter the number of copies.
4. Press [Options].
5. Press a or b to display the [2-sided Copy]option, and then press [2-sided Copy].
6. Press a or b to display the layout options, and then press the option you want.
7. When finished, press [OK].
8. Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
9. After the machine scans the page, place the next page on the scanner glass, and then press [Yes]to scan
the next page.
10. After scanning all the pages, press [No]to finish.
Related Information
• Copy
162
Copy Options
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
To change Copy settings, press the Options button.
Menu selections
Quality
Options
Select the copy quality for your type of document.
Stack/Sort
Select to stack or sort multiple copies.
Stack
2
1
2
1
Sort
1
1
2
2
Density
Increase the brightness to make the text lighter.
Decrease the brightness to make the text darker.
Contrast
Increase the contrast to make an image clearer.
Decrease the contrast to make an image more subdued.
Enlarge/Reduce
Select an enlargement or reduction ratio for the next copy.
• Autosets the machine to calculate the reduction ratio that best fits the
size of paper.(for models with ADF)
•
If you select Custom(25-400%), use the dial pad, or press a or b to
enter an enlargement or reduction ratio.
Page Layout
Make N in 1 copies.
4 in1
163
Menu selections
Options
2-sided
Select to copy on both sides of the paper.
(available only for certain models)
1-sided → 2-sided
1
1
2
2
2-sided → 2-sided
1
1
2
2
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
To change Copy settings, press [Options].
Menu selections
Quality
Options
Select the copy quality for your type of document.
Enlarge/Reduce
100%
-
Enlarge
Select an enlargement ratio for the
next copy.
Reduce
Select a reduction ratio for the next
copy.
Auto
Adjusts the copy size to fit the
paper size you have set.
Custom(25-400%)
Enter an enlargement or reduction
ratio.
Density
Increase the density to make the text darker.
Decrease the density to make the text lighter.
Contrast
Stack/Sort
Increase the contrast to make an image clearer.
Decrease the contrast to make an image more subdued.
Select to stack or sort multiple copies.
Stack
2
1
2
1
Sort
1
1
2
2
164
Menu selections
Options
Page Layout
Make N in 1 copies.
4 in1
2-sided Copy
Select to copy on both sides of the paper.
1-sided → 2-sided
1
1
2
2
2-sided → 2-sided
1
1
2
2
The available options will vary depending on your model.
Select long edge or short edge.
2-sided Copy Page Layout
(available only for certain settings)
Save as Shortcut
Add the current settings as a shortcut.
Related Information
• Copy
165
Send a Fax
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
2. Do one of the following:
• Place the document face up in the ADF.
(FAX).
(If you are faxing multiple pages, we recommend using the ADF.)
•
Place the document face down on the scanner glass.
168
3. Enter the fax number.
•
Using the dial pad
Enter the fax number using the dial pad.
•
Using the One Touch Buttons
Choose a contact stored on a One Touch button.
•
Using the Speed Dial Codes
Enter the fax number by pressing
twice, and then enter the three-digit Speed Dial code.
4. Press Start.
The machine scans and sends the document.
If you placed the document on the scanner glass, follow the instructions in the table:
Option
Description
Yes
To scan the next page, press a to select the Yesoption, and then place the next page on the
scanner glass.
Press OK to scan the page.
No(Send) When you have scanned the last page, press b to select the No(Send)option (or press Start
again).
The machine sends the document.
•
To stop faxing, press Stop/Exit.
169
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Do one of the following:
•
Place the document face up in the ADF.
(If you are faxing multiple pages, we recommend using the ADF.)
•
Place the document face down on the scanner glass.
2. Press
([Fax]).
3. Enter the fax number.
•
Using the dial pad
Press the digits to enter the fax number.
•
•
Using the Address Book
Press
([Address Book]), and then do one of the following:
Press a or b to display the number you want, and then press it.
Press , and then enter the name and press [OK]. Press the name you want to dial.
-
-
When finished, press [Apply].
Using the call history
Press
([Call History]), and then press the [Outgoing Call]option.
Press a or b to display the fax number you want, and then press it.
To send a fax, press [Apply].
170
4. Press [Fax Start].
The machine scans and sends the document.
If you placed the document on the scanner glass, follow the instructions in the table.
Option Description
Yes
To scan the next page, press the Yesoption, and then place the next page on the scanner glass.
Press OKto scan the page.
No
After you have scanned the last page, press the Nooption.
The machine sends the document.
To stop faxing, press
.
Related Information
171
Send a 2-sided Fax from the ADF
Related Models: MFC-L2750DW/MFC-L2750DWXL
You must select a 2-sided scanning format before sending a 2-sided fax. Select either Long Edge or Short Edge,
depending on the layout of your document.
1. Load your document.
2. Press
[(Fax)]> [Options]> [2-sided Fax].
3. Do one of the following:
•
•
If your document is flipped on the long edge, press the [2-sided Scan: Long Edge]option.
If your document is flipped on the short edge, press the [2-sided Scan: Short Edge]option.
4. Press [OK]
5. Enter the fax number.
6. Press [Fax Start].
Related Information
172
Send a Fax Manually
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Manual fax transmission lets you hear the dialing, ringing and fax-receiving tones while sending a fax.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Press Hook and listen for a dial tone.
4. Dial the fax number you want to call.
5. When you hear the fax tone, press Start.
•
If you are using the scanner glass, press a.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
([Fax]).
3. Press [Hook]and listen for a dial tone.
4. Dial the fax number you want to call.
5. When you hear the fax tone, press [Fax Start].
•
If you are using the scanner glass, press [Send].
Related Information
173
Send a Fax at the End of a Conversation
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
At the end of a conversation, you can send a fax to the other party before you both hang up.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Ask the other party to wait for fax tones (beeps) and then to press the Start button before hanging up.
2. Load your document.
3. Press Start.
•
If you are using the scanner glass, press a.
4. Replace the handset of the external telephone.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Ask the other party to wait for fax tones (beeps) and then to press the Start button before hanging up.
2. Load your document.
3. Press
.
4. Press [Fax Start].
•
If you are using the scanner glass, press [Send].
5. Replace the handset of the external telephone.
Related Information
174
Send the Same Fax to More than One Recipient (Broadcasting)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Use the Broadcasting feature to send the same fax to multiple fax numbers at the same time.
•
•
The same broadcast can include Groups, Address Book numbers (One Touch Dial numbers and Speed
Dial numbers in some models) and up to 50 manually dialed numbers.
2-Line LCD models
If you did not use any of the One Touch Dial numbers and the Speed Dial numbers for Groups, you can
broadcast faxes to as many as 258 different numbers.
•
Touchscreen LCD models
If you did not use any of the Address Book numbers for Groups, you can broadcast faxes to as many as
250 different numbers.
•
•
Address Book numbers (One Touch Dial numbers and Speed Dial numbers in some models) must be
stored in the machine’s memory before they can be used in a broadcast.
Group numbers must also be stored in the machine’s memory before they can be used in a broadcast.
Group numbers include many stored Address Book numbers (One Touch Dial numbers and Speed Dial
numbers in some models) for easier dialing.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Enter a number, and press OK.
You can use One Touch Dial, Speed Dial, Group numbers and numbers manually entered using the dial pad.
Repeat this step to enter the all the numbers you want to broadcast to.
4. Press Start.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
[(Fax)]> [Options]> [Broadcasting].
3. Press [Add Number].
You can add numbers to the broadcast in the following ways;
•
Press [Add Number]and enter a fax number using the LCD.
Press [OK].
•
•
Press [Add from Address book]to select numbers, and then press [OK].
Press [Search in Address book]to search for a number.
Enter a name using the LCD, and then press [OK].
Select a name and a number you want to add.
4. When finished, press [OK].
5. Press [Fax Start].
6. Do one of the following:
•
If you are using the ADF, the machine scans and sends the document.
175
•
If you are using the scanner glass, the machine scans the first page.
When the LCD displays [Next page?], press an option shown in the table.
Option Description
Yes
Select Yesto scan the next page.
Place the Next page on the Scanner Glass, and then press OK.
Repeat this step to scan all pages.
No
Select Noto send the document.
•
The machine’s available memory will vary depending on the types of jobs in the memory and the
numbers used for broadcasting. If you broadcast to the maximum number available, you cannot use
dual access and delayed fax.
•
If the [Out of Memory]message appears, press
or [Quit]to cancel or [Send Now]to send
the pages scanned so far.
Related Information
176
Broadcast in Progress
Cancel a Broadcast in Progress
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
While broadcasting you can cancel the fax currently being sent or the whole broadcast job.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Remaining Jobs]option, and then press OK.
The LCD will display the Broadcast job number followed by the fax number being dialed (for example,
[#001123456789]) and the broadcast job number (for example, [Broadcast#001]).
4. Press a or b to display the fax number being dialed or the broadcast job number, and then press OK.
5. Press the option shown in the table to cancel or exit the cancel process.
Option Description
a
b
The machine cancels the fax currently being sent.
The machine exits from the cancel process without canceling.
If you canceled the fax currently being sent, the LCD will ask you if you want to cancel the broadcast job.
6. Press the option shown in the table to cancel the broadcast job or exit the cancel process.
Option Description
a
b
The machine cancels the broadcast job.
The machine exits from the cancel process without canceling.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
.
2. Do one of the following:
•
•
To cancel the entire broadcast, press [Entire Broadcast]. Press [Yes]to confirm or press [No]to
exit without canceling the broadcast.
To cancel the current job, press the name or number being canceled on the LCD. Press [Yes]to confirm
or press [No]to exit without canceling the fax being sent.
•
To exit without canceling, press
.
Related Information
177
Send a Fax in Real Time
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
When sending a fax, the machine scans the document into the memory before sending it. As soon as the
telephone line is free, the machine starts dialing and sending. If you want to send an important document
immediately without waiting for the machine to retrieve the scan from its memory, turn on [Real Time TX].
•
If the memory is full and you are sending a fax from the ADF, the machine sends the document in real time
(even if [Real Time TX]is set to [Off]). If the memory is full, faxes from the scanner glass cannot be
sent until you clear some of the memory.
•
•
In Real Time Transmission, the automatic redial feature does not work when using the scanner glass.
If [Real Time TX]is set to on, the option to scan 2-sided documents is not available.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Press Menu.
4. Press a or b to display the [Fax]option, and then press OK.
5. Press a or b to display the [Setup Send]option, and then press OK.
6. Press a or b to display the [Real Time TX]option, and then press OK.
7. Press a or b to display the [On]option, and then press OK.
8. When finished, press Stop/Exit.
9. Enter the fax number.
10. Press Start.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
[(Fax)]> [Options]> [Real Time TX].
3. Press [On]or [Off].
4. Press [OK].
5. Enter the fax number.
6. Press [Fax Start].
Related Information
178
Send a Fax at a Specified Time (Delayed Fax)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can store up to 50 faxes in the machine's memory to be sent within the next twenty-four hour period.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Press Options.
4. Press a or b to display the [Delayed Fax]option, and then press OK.
5. Enter the time you want the fax to be sent.
•
If you set [12h Clock]in the [Date&Time]setting, enter the time in 12-hour format, and then press
OK.
Press a or b to display the [AM]or [PM]option, and then press OK.
•
If you set [24h Clock]in the [Date&Time]setting, enter the time in 24-hour format, and then press
OK.
(For example, enter 19:45 for 7:45 PM.)
6. Enter the fax number.
7. Press Start.
•
The number of pages you can scan into the memory depends on the amount of data printed on each
page.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
[(Fax)]> [Options]> [Delayed Fax]> [Delayed Fax].
3. Press [On]or [Off].
4. Press [Set Time].
5. Enter the time you want the fax to be sent.
•
If you set [12h Clock]in the [Date & Time]setting, enter the time in 12-hour format.
Press the button to select [AM]or [PM], and then press [OK].
•
If you set [24h Clock]in the [Date & Time]setting, enter the time in 24-hour format and then press
[OK].
(For example, enter 19:45 for 7:45 PM.)
6. Press [OK]
7. Enter the fax number.
8. Press [Fax Start].
Related Information
179
Add a Cover Page to Your Fax
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can add a cover page to the next fax or every outgoing fax.
•
•
This feature will not work unless you have programmed your Station ID.
Your cover page includes your Station ID, a comment, and the name stored in the Address Book, One
Touch Dial, or Speed Dial (in some models).
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Press Menu.
4. Press a or b to display the [Fax]option, and then press OK.
5. Press a or b to display the [Setup Send]option, and then press OK.
6. Press a or b to display the [Coverpage]option, and then press OK.
7. Press a or b to display the [Setup]option, and then press OK.
8. Press a or b to display a option in the table, and then press OK.
Option Description
On
Select this option to add a cover page to outgoing fax.
Off
Select this option if you do not want to add a cover page to outgoing faxes.
9. If you selected [On], press a or b to display comment options, and then press OK.
10. Enter the number of total pages using the dial pad, and then press OK.
11. When finished, press Stop/Exit.
12. Enter the fax number.
13. Press Start.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Load your document.
2. Press
[(Fax)]> [Options]> [Coverpage Setup]> [Coverpage Setup].
3. Press [On]or [Off].
4. Press [Coverpage Message].
5. Press a or b to display comment you want, and then press it.
6. Press [Total Pages].
7. Enter the number of total pages, and then press [OK].
8. Press
.
9. Press [OK].
10. Enter the fax number.
180
11. Press [Fax Start].
The cover page will be added to the next fax. If you want to add the cover page to every outgoing fax, set the
settings as the new default.
Related Information
181
Compose Your Own Comments
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can set up two comments of your own.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Send]option, and then press OK.
5. Press a or b to display the [Coverpage]option, and then press OK.
6. Press a or b to display the [Message]option, and then press OK.
7. Press a or b to display the [5]or [6]option to store your own comment, and then press OK.
8. Enter your own comment using the dial pad, and then press OK.
9. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Send]> [Coverpage Message].
2. Press [5]or [6]to store your own comment.
3. Enter your own comment using the LCD, and then press [OK].
4. Press
.
Related Information
182
Cancel a Fax in Progress
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Stop/Exit while the machine is dialing or sending a fax.
2. Press an option in the table to cancel or continue the fax job in progress.
Option Description
a
b
The machine cancels sending the fax job.
The machine exits from the process without canceling the fax job.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
while the machine is dialing or sending a fax.
The LCD will display [Cancel Job?].
2. Press an option in the table to cancel or continue the fax job in progress.
Option Description
Yes
No
The machine cancels sending the fax job.
The machine exits from the process without canceling the fax job.
Related Information
183
Check and Cancel a Pending Fax
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can cancel a fax job before it is sent, by canceling the fax job while it is stored and waiting in the memory.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Remaining Jobs]option, and then press OK.
The LCD displays the number of jobs waiting in the memory to be sent.
5. Press a or b to display the job you want to cancel, and then press OK.
6. Press the options in the following table to cancel or exit the cancel process.
Option Description
a
b
The machine cancels the job.
The machine exits from the cancel process without canceling.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Remaining Jobs].
2. Do the following steps for each job you want to check or cancel:
a. Press a or b to scroll through the waiting jobs, and then press the job you want to cancel.
b. Press [OK].
c. Press [Yes]to confirm or press [No]to exit without canceling.
3. When finished canceling jobs, press
.
Related Information
184
Fax Options
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
To change fax-sending settings, press the [Options]button.
Option
Description
Fax Resolution
Set the resolution for outgoing faxes.
The fax quality often can be improved by changing the Fax
Resolution.
Contrast
Adjust the contrast.
If your document is very light or very dark, changing the contrast
may improve the fax quality.
Glass ScanSize
Adjust the scan area of the scanner glass to the size of the
document.
Delayed Fax
Real Time TX
Set the time of day the delayed faxes will be sent.
Send a fax immediately without waiting for the machine to retrieve
the scan from its memory.
Coverpage
Set the machine to automatically send a cover page that you have
pre-programmed.
Overseas Mode
Set to On if you have difficulty sending faxes overseas.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
To change fax-sending settings, press the [Options]button.
Option
Description
Fax Resolution
Set the resolution for outgoing faxes.
The fax quality often can be improved by changing the Fax
Resolution.
Contrast
Adjust the contrast.
If your document is very light or very dark, changing the contrast
may improve the fax quality.
2-sided Fax
Set the 2-sided scanning format.
(For automatic 2-sided scanning models)
Glass Scan Size
Adjust the scan area of the scanner glass to the size of the
document.
Broadcasting
Send the same fax message to more than one fax number at the
same time.
Delayed Fax
Real Time TX
Set the time of day the delayed faxes will be sent.
Send a fax immediately without waiting for the machine to retrieve
the scan from its memory.
Coverpage Setup
Set the machine to automatically send a cover page that you have
pre-programmed.
Overseas Mode
Call History
Address Book
Set to On if you have difficulty sending faxes overseas.
Select a number from the Call History.
Select a number from the Address Book.
185
Option
Description
Set New Default
Factory Reset
Save your settings as the default.
Restore all settings back to the factory settings.
You can save the current settings by pressing [Save as Shortcut].
Related Information
186
Receive Modes Overview
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Some receive modes answer automatically (Fax Only Mode and Fax/Tel Mode). You may want to change the
Ring Delay before using these modes.
Fax Only Mode
([Fax Only]in the machine's menu)
Fax Only Mode automatically answers every call as a fax.
Fax/Tel Mode
([Fax/Tel]in the machine's menu)
Fax/Tel Mode helps you manage incoming calls, by recognizing whether they are fax or voice calls and
handling them in the following ways:
•
•
Faxes will be received automatically.
Voice calls will start the F/T ring to tell you to pick up the call. The F/T ring is a fast pseudo/double-ring
made by your machine.
Manual Mode
([Manual]in the machine's menu)
Manual Mode turns off all automatic answering operations unless you are using the Distinctive Ring Receive
feature.
To receive a fax in Manual Mode, lift the handset of the external telephone connected to the machine or press
the button in the table.
Applicable Models
Alternate way to lift the handset
Hook
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
(Fax) and then Hook
When you hear fax tones (short repeating beeps), press the buttons in the table to receive a fax. Use the Easy
Receive feature to receive faxes when you have lifted a handset on the same line as the machine.
Applicable Models
2-Line LCD models
To receive the fax
Start and then b
Touchscreen LCD models
Fax Startand then Receive
External TAD Mode
([External TAD]in the machine's menu)
External TAD Mode lets an external answering device manage your incoming calls.
Incoming calls will be handled in the following ways:
•
•
Faxes will be received automatically.
Voice callers can record a message on the external TAD.
Related Information
189
Choose the Correct Receive Mode
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
The correct Receive Mode for you is determined by the external devices and telephone subscriber services
(Voice Mail, Distinctive Ring and so on) you will be using on the same line as the Brother machine.
Will you be using a Distinctive Ring number for receiving faxes?
Brother uses the term "Distinctive Ring" but different telephone companies may have other names for this
service, such as Custom Ringing, Personalized Ring, Teen Ring, Ident-A-Ring, Ident-A-Call, Data Ident-A-
Call, Smart Ring and SimpleBiz Fax & Alternate Number Ringing.
Will you be using Voice Mail on the same telephone line as your Brother machine?
If you have Voice Mail on the same telephone line as your Brother machine, there is a strong possibility that
Voice Mail and the Brother machine will conflict with each other when receiving incoming calls.
Will you be using a Telephone Answering Device on the same telephone line as your Brother machine?
Your external telephone answering device (TAD) will answer every call automatically. Voice messages are
stored on the external TAD and fax messages are printed. Select [External TAD]as your receive mode.
Will you be using your Brother machine on a dedicated fax line?
Your machine automatically answers every call as a fax. Select [Fax Only]as your receive mode.
Will you be using your Brother machine on the same line as your telephone?
•
Do you want to receive voice calls and faxes automatically?
The Fax/Tel Mode is used when sharing the Brother machine and your telephone on the same line.
Select [Fax/Tel]as your receive mode.
Important Note: You cannot receive voice messages on either Voice Mail or an answering machine if
you selected the Fax/Tel Mode.
•
Do you expect to receive very few faxes?
Choose [Manual]as your receive mode. You control the telephone line and must answer every call
yourself.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [Receive Mode]option, and then press OK.
If you cannot change the [Receive Mode]option, make sure the Distinctive Ring feature is set to [Off].
6. Press a or b to select the [Fax Only], [Fax/Tel], [External TAD], or [Manual]option, and then
press OK.
7. Press Stop/Exit.
190
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Receive Mode].
If you cannot change the [Receive Mode]option, make sure the Distinctive Ring feature is set to [Off].
2. Press a or b to display the [Fax Only], [Fax/Tel], [External TAD], or [Manual]option, and then
press the option you want.
3. Press
.
Related Information
Related Topics:
191
Answers (Ring Delay)
Set the Number of Rings Before the Machine Answers (Ring Delay)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in
the Ring Delay option.
•
•
The Ring Delay setting sets the number of times the machine rings before it answers in the Fax Only and
Fax/Tel Modes.
If you have external or extension telephones on the same line as the machine, keep the Ring Delay setting
of 4.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [Ring Delay]option, and then press OK.
6. Press a or b to select the number of rings you want the line to ring before the machine answers, and then
press OK.
7. Press Stop/Exit.
If you select [00], the machine will answer immediately and the line will not ring at all (available only for
some countries).
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Ring Delay].
2. Press the number of rings you want the line to ring before the machine answers.
If you select [0], the machine will answer immediately and the line will not ring at all (available only for
some countries).
3. Press
.
Related Information
Related Topics:
192
Set the F/T Ring Time (Pseudo/Double-ring)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
When you set the Receive Mode to Fax/Tel Mode, if the call is a fax, your machine will automatically receive it.
However, if it is a voice call, the machine will sound the F/T ring (pseudo/double-ring) for the time you set in the
F/T Ring Time option. When you hear the F/T ring, it means that a voice caller is on the line.
•
The F/T Ring Time feature works when you set Fax/Tel Mode as the Receive Mode.
Because the F/T ring is made by the machine, extension and external telephones will not ring; however, you can
still answer the call on any telephone.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [F/T Ring Time]option, and then press OK.
6. Press a or b to display how long the machine will ring to alert you that you have a voice call, and then press
OK.
7. Press Stop/Exit.
Even if the caller hangs up during the pseudo/double-ringing, the machine will continue to ring for the set
time.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [F/T Ring Time].
2. Press how long you want the machine to ring to alert you that you have a voice call.
3. Press
.
Even if the caller hangs up during the pseudo/double-ringing, the machine will continue to ring for the set
time.
Related Information
193
Set Easy Receive
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If Easy Receive is On: The machine can receive a fax automatically, even if you answer the call. When
you see [Receiving]on the LCD or hear a click on the phone line through the handset you are using,
just replace the handset. Your machine will do the rest.
If Easy Receive is Off: If you are at the machine and answer a fax call first by lifting the external handset,
press the buttons in the following table to receive the fax. If you answered at an extension telephone, press
*51.
Applicable Models
To receive the fax
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
Start and then b
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
> Fax Start> Receive
•
•
If this feature is set to [On], but your machine does not connect a fax call when you lift an extension
or external telephone handset, press the fax receive code *51.
If you send faxes from a computer on the same telephone line and the machine intercepts them, set
Easy Receive to [Off].
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [Easy Receive]option, and then press OK.
6. Press a or b to display the [On](or [Off]) option, and then press OK.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Easy Receive].
2. Press [On]or [Off].
3. Press
.
Related Information
194
Shrink Page Size of an Oversized Incoming Fax
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If you enable the auto reduction function, the machine reduces each page of an incoming fax to fit on your paper.
The machine calculates the reduction ratio by using the page size of the fax and your Paper Size setting.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [Auto Reduction]option, and then press OK.
6. Press a or b to display the [On](or [Off]) option, and then press OK.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Auto Reduction].
2. Press [On]or [Off].
3. Press
.
Related Information
195
Set the 2-sided Printing for Received Faxes
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Your machine prints received faxes on both sides of the paper when [2-sided]is set to [On].
•
•
Use Letter, Legal, Folio (8.5 in. × 13 in.) or Mexico Legal size paper for this function [16 to 28 lb (60 to 105
g/m )].
2
When 2-sided printing is enabled, incoming faxes are automatically reduced to fit the paper in the paper
tray.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [2-sided]option, and then press OK.
6. Press a or b to display the [On](or [Off]) option, and then press OK.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [2-sided].
2. Press [On]or [Off].
3. Press
.
Related Information
196
Set the Fax Receive Stamp
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can set the machine to print the received date and time at the top center of each received fax page.
•
Make sure you have set the current date and time on the machine.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [Fax Rx Stamp]option, and then press OK.
6. Press a or b to display the [On](or [Off]) option, and then press OK.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Fax Rx Stamp].
2. Press [On]or [Off].
3. Press
.
Related Information
197
Conversation
Receive a Fax at the End of a Telephone Conversation
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If you are speaking on the telephone connected to your Brother machine and the other party is also speaking on
a telephone connected to his fax machine, at the end of the conversation, the other party can send you a fax
before you both hang up.
Your machine's ADF must be empty.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Ask the other party to place the document in their machine and to press the Start or Send button.
2. When you hear the CNG tones (slowly repeating beeps), press Start.
3. Press b to receive a fax.
4. Replace the external handset.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Ask the other party to place the document in their machine and to press the Start or Send button.
2. When you hear the CNG tones (slowly repeating beeps), press [Fax Start].
•
•
If the LCD is dark for Sleep Mode, touch it to display [Fax Start].
If the machine is in Automatic Redial, wait until it is finished and try again.
3. Press [Receive]to receive a fax.
4. Replace the external handset.
Related Information
198
Register a Number in the Blocked List
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If you do not want to receive faxes or calls from specific numbers, register the numbers to your list of blocked
callers. The machine can register up to 100 fax or telephone numbers from the caller ID memory.
•
•
You must apply for the Caller ID service at your local telephone company.
The number you want to register must be stored in the caller ID memory.
The Caller ID feature is not available in some countries.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Anti-Junk Fax]option, and then press OK.
5. Press a or b to display the [Register]option, and then press OK.
The machine displays the numbers in the caller ID memory.
•
•
To delete the number, press a and then press OK.
To print the blocked list, select [Print Report]and then press OK. Follow the on-screen menus.
6. Press a or b to display the number you want, and then press OK.
7. Press a to register the number.
To go back without registering the number, press b.
8. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Anti-Junk Fax].
2. Press [Register].
•
•
To delete the number, select [Delete]and then press [OK].
To print the blocked list, press [Print Reports]and then follow the on-screen menus.
3. Press a or b to display the number you want, and then press the number.
4. Press [Yes].
5. Press
.
Related Information
199
Memory Receive Options
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Use Memory Receive options to direct incoming faxes while you are away from the machine. You can use only
one Memory Receive option at a time.
Memory Receive can be set to:
•
•
•
•
Fax Forwarding
Fax Storage
PC-Fax Receive
Off
200
Forward Incoming Faxes to Another Machine
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Use the Fax Forwarding feature to automatically forward your incoming faxes to another machine.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Memory Receive]option, and then press OK.
4. Press a or b to display the [Forward/Store]option, and then press OK.
5. Press a or b to display the [Fax Forward]option, and then press OK.
The LCD will ask you to enter the fax number you want your faxes to be forwarded to.
6. Enter the forwarding number using the dial pad (up to 20 digits), a One Touch button, or
and the three-
digit code, and then press OK.
•
If you stored a Group on a One Touch key or in a Speed Dial code, the faxes will be forwarded to
multiple fax numbers.
7. Press a or b to select on or off for the Backup Print setting.
8. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Memory Receive].
2. Press [Fax Forward].
3. Do one of the following:
•
•
Press [Manual]to enter the forwarding fax number (up to 20 digits) using the LCD.
Press [OK].
Press [Address Book].
Press a or b to display the destination fax number where you want to your faxes forwarded.
Press the fax number you want.
NOTE
•
Press [Backup Print: On]or [Backup Print: Off]. If you select [Backup Print: On],
the machine also prints a copy of received faxes at your machine.
4. Press
.
Related Information
201
Store Incoming Faxes in the Machine's Memory
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Use the Fax Storage feature to store incoming faxes in the machine's memory. Retrieve your stored fax
messages from your fax machine when you are at another location using the Remote Retrieval commands. Your
machine will print a backup copy of each stored fax.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Memory Receive]option, and then press OK.
4. Press a or b to display the [Forward/Store]option, and then press OK.
5. Press a or b to display the [Fax Storage]option, and then press OK.
6. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Memory Receive].
2. Press the [Fax Storage]option.
NOTE
•
Press [Backup Print: On]or [Backup Print: Off]. If you select [Backup Print: On],
the machine also prints a copy of received faxes. (Available only for certain models)
3. Press
.
Related Information
202
Change Memory Receive Options
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
If there are faxes in your machine's memory when you change any Memory Receive option, the LCD displays
one of the following questions:
If received faxes have already been printed, the LCD displays [Erase all faxes?]
•
Do one of the following:
-
-
If you press a, faxes in the memory will be erased before the setting changes.
If you press b, faxes in the memory will not be erased and the setting will be unchanged.
If unprinted faxes are in the memory, the LCD displays [Print all faxes?]
Do one of the following:
•
-
If you press a, faxes in the memory will be printed before the setting changes. If a backup copy has
already been printed, it will not be printed again.
-
If you press b, faxes in the memory will not be printed and the setting will be unchanged.
If received faxes are left in the machine’s memory when you change to [PC Fax Receive]from another
option (such as [Fax Forward], or [Fax Storage]).
•
Select [<USB>]or the name of the computer if you are on a network, and then press OK.
The LCD displays:
[Send Fax to PC?]
-
If you press a, faxes in the memory will be sent to your computer before the setting changes. You will be
asked if you want to turn on Backup Print.
-
If you press b, faxes in the memory will not be erased and the setting will be unchanged.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
If received faxes are in your machine's memory when you change the Remote Fax operations, the LCD will ask
you one of the following questions:
If received faxes have already been printed, the LCD displays [Erase all faxes?]
•
Do one of the following:
-
-
If you press [Yes], faxes in the memory will be erased before the setting changes.
If you press [No], faxes in the memory will not be erased and the setting will be unchanged.
If unprinted faxes are in the machine's memory, the LCD displays [Print all faxes?]
Do one of the following:
•
-
-
If you press [Yes], faxes in the memory will be printed before the setting changes.
If you press [No], faxes in the memory will not be printed and the setting will be unchanged.
If received faxes are left in the machine’s memory when you change to [PC Fax Receive]from another
option ([Fax Forward]or [Fax Storage]).
•
Press [<USB>]or the name of the computer if you are on a network, and then press [OK]. You will be asked
if you want to turn on Backup Print.
The LCD displays:
[Send Fax to PC?]
-
If you press [Yes], faxes in the memory will be sent to your computer before the setting changes.
203
-
If you press [No], faxes in the memory will not be erased and the setting will be unchanged.
Related Information
204
Turn Off Memory Receive
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Turn off Memory Receive if you do not want the machine to save or transfer incoming faxes.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Memory Receive]option, and then press OK.
4. Press a or b to display the [Forward/Store]option, and then press OK.
5. Press a or b to display the [Off]option, and then press OK.
The LCD displays options if there are received faxes still in your machine's memory.
6. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Memory Receive].
2. Press [Off].
The LCD displays options if there are received faxes still in your machine's memory.
3. Press
.
Related Information
205
Print a Fax Stored in the Machine's Memory
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If you select [Fax Storage], you can still print a fax from the memory when you are at your machine.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Memory Receive]option, and then press OK.
4. Press a or b to display the [Print Fax]option, and then press OK.
5. Press Start.
6. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Print Fax].
2. Press [Yes].
Related Information
Related Topics:
206
Faxes to Your Computer (Windows only)
Use PC-Fax Receive to Transfer Received Faxes to Your Computer
(Windows only)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Turn on the PC-Fax Receive feature, automatically store incoming faxes to your machine's memory, and then
send them to your computer. Use your computer to view and store these faxes.
To transfer the received faxes to your computer you must have the PC-FAX Receiving software running on
your computer.
Even if you have turned off your computer (at night or on the weekend, for example), your machine will receive
and store your faxes in its memory.
When you start your computer and the PC-FAX Receiving software runs, your machine transfers your faxes to
your computer automatically.
If you selected [Backup Print: On], the machine will also print the fax.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Memory Receive]option, and then press OK.
5. Press a or b to display the [PC Fax Receive]option, and then press OK.
•
•
PC-Fax Receive is not available for the Mac operating systems.
If you get an error message and the machine cannot print the faxes in the memory, you can use this
setting to transfer your faxes to your computer.
6. Press a or b to display [On], and then press OK.
7. Press OK.
8. Press a or b to display [<USB>]or your computer name, and then press OK.
9. Press a or b to display [On]or [Off]for the Backup Print setting, and then press OK.
10. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [PC Fax Receive].
2. Press [On].
•
•
PC-Fax Receive is not available for the Mac operating systems.
If you get an error message and the machine cannot print the faxes in the memory, you can use this
setting to transfer your faxes to your computer.
3. Press [OK].
4. Press [<USB>]or the name of the computer you want to receive faxes if you are on a network, and then
press [OK].
207
5. Press [Backup Print: On]or [Backup Print: Off].
6. Press
.
Related Information
208
Set a Remote Access Code
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Set a Remote Access Code to access and control your Brother machine even when you are away from it.
Before you can use the remote access and retrieval features, you must set up your own code. The factory
default code is the inactive code (---*).
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Memory Receive]option, and then press OK.
4. Press a or b to display the [Remote Access]option, and then press OK.
5. Enter a three-digit code using the numbers 0 to 9, * or # using the dial pad, and then press OK.
•
•
•
To make your code inactive, press Clear to delete the three-digit code in this step. Then press OK.
You cannot change the preset *.
DO NOT use the same code used for your Fax Receive Code (*51) or Telephone Answer Code (#51) .
6. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Remote Access].
2. Enter a three-digit code using the numbers [0]to [9], [*]or [#]using the the LCD (The preset '*' cannot
be changed), and then press [OK].
•
•
DO NOT use the same code used for your Fax Receive Code (*51) or Telephone Answer Code (#51).
To make your code inactive, press and hold
to restore the inactive setting (---*), and then press
[OK].
3. Press
.
Related Information
210
Use Your Remote Access Code
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
1. Dial your fax number from a telephone or another fax machine using touch tone.
2. When your machine answers, immediately enter your Remote Access Code (three digits followed by *).
3. The machine signals if it has received messages:
•
•
One long beep -- Fax messages
No beeps -- No messages
4. When the machine gives two short beeps, enter a command.
•
•
The machine will hang up if you wait longer than 30 seconds to enter a command.
The machine will beep three times if you enter an invalid command.
5. Press 9 0 to reset the machine when you are finished.
6. Hang up.
•
This function may not be available in some countries or supported by your local telephone company.
Related Information
211
Remote Retrieval Commands
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Use the Remote Commands in this table to access fax commands and options when you are away from your
Brother machine. When you call the machine and enter your remote access code (three digits followed by *), the
system will sound two short beeps and you must enter a Remote Command (column 1), followed by one of the
options (column 2) for that command.
Remote
Options
Operation details
commands
95
Change the Fax Forwarding, or Fax
Storage settings
1 OFF
You can select Off after you retrieve or erase all
your messages.
2 Fax Forwarding
4 Fax Forwarding number
6 Fax Storage
One long beep means the change is accepted. If
you hear three short beeps, you cannot make a
change because something has not been set up
(for example, a Fax Forwarding number has not
been registered). You can register your Fax
Forwarding number by entering 4. After you
register the number, Fax Forwarding will work.
96
Retrieve a fax
2 Retrieve all faxes
Enter the fax number of a remote fax machine to
receive stored fax messages.
3 Erase faxes from memory
If you hear one long beep, fax messages have
been erased from memory.
97
98
Check the receiving status
1 Fax
Check whether your machine has received any
faxes. If yes, you will hear one long beep. If not,
you will hear three short beeps.
Change the Receive Mode
1 External TAD
2 Fax/Tel
One long beep means the change has been
accepted.
3 Fax Only
90
Exit
Press 9 0 to stop remote retrieval. Wait for the long
beep, then hang up.
Related Information
212
Forward Faxes Remotely
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Call your Brother machine from any touch-tone telephone or fax machine to forward incoming faxes to another
machine.
You must turn on Fax Storage to use this feature.
1. Dial your fax number.
2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one
long beep, you have messages.
3. When you hear two short beeps, press 9 6 2.
4. Wait for the long beep, and then use the dial pad to enter the number of the remote fax machine where you
want your fax messages sent, followed by # # (up to 20 digits).
You cannot use * and # as dial numbers. However, press # if you want to create a pause.
5. Hang up after you hear your machine beep. Your machine will call the other fax machine, which will then print
your fax messages.
Related Information
213
Change the Fax Forwarding Number
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can change your fax forwarding number from another touch-tone telephone or fax machine.
1. Dial your fax number.
2. When your machine answers, enter your Remote Access Code (three digits followed by *). If you hear one
long beep, you have messages.
3. When you hear two short beeps, press 9 5 4.
4. Wait for the long beep, enter the new number (up to 20 digits) of the remote fax machine you want your fax
messages forwarded to using the dial pad, then enter # #.
You will hear one long beep.
You cannot use * and # as dial numbers. However, press # if you want to create a pause.
5. When you hear two short beeps, press 9 0 to stop Remote Access when you have finished.
6. Hang up after you hear your machine beep.
Related Information
214
Send Tone Signals (For Canada)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If you have a Pulse dialing service, but must send Tone signals (for example, for telephone banking), follow these
steps. If you have a Touch Tone service, you will not need this feature to send tone signals.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Hook .
3. Press # on the machine’s control panel.
Any digits dialed after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialing service.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
([Fax]).
2. Press [Hook].
3. Press # on the machine's LCD.
Any digits dialed after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialing service.
Related Information
217
Receive Mode
Pick up a Voice Call in Fax/Tel Receive Mode
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
When the machine is in Fax/Tel mode, it will use the F/T Ring (pseudo/double-ring) to alert you to pick up a voice
call.
If you are at the machine, lift the external telephone’s handset, and then press the button in the following table to
answer:
Applicable Models
To pick up voice call
Hook
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
Pickup
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
If you are at an extension telephone, lift the handset during the F/T Ring and then press #51 between the
pseudo/double rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the
machine by pressing *51.
Related Information
218
Rollover Telephone Lines
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
A rollover telephone system is a group of two or more separate telephone lines that pass incoming calls to each
other if they are busy.
This feature is available only in the USA and Canada.
The calls are usually passed down or 'rolled over' to the next available telephone line in a preset order.
Your machine can work in a rollover system only if it is the last number in the sequence, so the call cannot roll
away. Do not place the machine on any of the other numbers; when the other lines are busy and a second fax
call is received, the fax call would be transferred to a line that does not have a fax machine. Your machine will
work best on a dedicated line.
Related Information
220
Two-Line Telephone System
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
A two-line telephone system is nothing more than two separate telephone numbers on the same wall outlet.
This feature is available only in the USA and Canada.
The two telephone numbers can be on separate jacks (RJ11) or combined into one jack (RJ14). Your machine
must be plugged into an RJ11 jack. RJ11 and RJ14 jacks may be equal in size and appearance and both may
contain four wires (black, red, green, yellow). To test the type of jack, plug in a two-line telephone and see if it
can access both lines. If it can, you must separate the line for your machine.
Related Information
221
Convert Telephone Wall Outlets
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
This feature is available only in the USA and Canada.
There are three ways to convert to an RJ11 jack. The first two ways may require assistance from the telephone
company. You can change the wall outlets from one RJ14 jack to two RJ11 jacks. Or, you can have an RJ11 wall
outlet installed and slave or jump one of the telephone numbers to it.
The third way is the easiest: Buy a triplex adapter. You can plug a triplex adapter into an RJ14 outlet. It separates
the wires into two separate RJ11 jacks (Line 1, Line 2) and a third RJ14 jack (Lines 1 and 2). If your machine is
on Line 1, plug the machine into L1 of the triplex adapter. If your machine is on Line 2, plug it into L2 of the triplex
adapter.
Triplex adapter
Related Information
222
Install Your Brother Machine, an External Two-Line TAD and Two-Line
Telephone
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
When you are installing an external two-line telephone answering device (TAD) and a two-line telephone, your
machine must be isolated on one line at both the wall jack and at the TAD.
•
•
This feature is available only in the USA and Canada.
The most common connection is to place the machine on Line 2, which is explained in the following steps.
The back of the two-line TAD must have two telephone jacks: one labeled L1 or L1/L2, and the other
labeled L2. You will need at least three telephone line cords, the one that came with your machine and two
for your external two-line TAD. You will need a fourth line cord if you add a two-line telephone.
1. Place the two-line TAD and the two-line telephone next to your machine.
2. Plug one end of the telephone line cord for your machine into the L2 jack of the triplex adapter. Plug the other
end into the LINE jack of the machine.
3. Plug one end of the first telephone line cord for your TAD into the L1 jack of the triplex adapter. Plug the other
end into the L1 or L1/L2 jack of the two-line TAD.
4. Plug one end of the second telephone line cord for your TAD into the L2 jack of the two-line TAD. Plug the
other end into the EXT. jack of the machine.
a
b
a. Triplex Adapter
b. Two Line Telephone
c. External Two Line TAD
d. Machine
You can keep two-line telephones on other wall outlets as always. There are ways to add a two-line telephone to
the machine's wall outlet. You can plug the telephone line cord from the two-line telephone into the L1+L2 jack of
the triplex adapter. Or, you can plug the two-line telephone into the TEL jack of the two-line TAD.
Related Information
223
Store Address Book Numbers
Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
[(Fax)]> [Address Book].
2. Do the following steps:
a. Press [Edit].
b. Press [Add New Address].
c. Press [Name].
d. Enter the name using the LCD (up to 16 characters), and then press [OK].
e. Press [Address].
f. Enter the number using the LCD (up to 20 digits), and then press [OK].
g. Press [OK].
To store another Address Book number, repeat these steps.
3. Press
.
Related Information
225
Numbers > Store Address Book Numbers from Outgoing Calls
Store Address Book Numbers from Outgoing Calls
Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
You can store Address Book numbers from the Outgoing Call history.
1. Press
[(Fax)]> [Call History]> [Outgoing Call].
2. Press the number you want.
3. Press [Edit]> [Add to Address Book]> [Name].
To delete the number, press [Edit]> [Delete]. Press [Yes]to confirm.
4. Enter the name using the LCD (up to 16 characters).
5. Press [OK].
6. Press [OK]to confirm the fax or telephone number you want to store.
7. Press
.
Related Information
226
Book Names or Numbers
Change or Delete Address Book Names or Numbers
Related Models: MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
2. Do one of the following:
• Press [Change]to edit the names or fax or telephone numbers.
Press a or b to display the number you want to change, and then press it.
[(Fax)]> [Address Book]> [Edit].
-
To change the name, press [Name]. Enter the new name (up to 16 characters) using the LCD, and
then press [OK].
-
To change the fax or telephone number, press [Address]. Enter the new fax or telephone number
(up to 20 digits) using the LCD, and then press [OK].
Press [OK]to finish.
How to enter text:
To change a character, press d or c to position the cursor to highlight the character you want to change,
and then press
. Enter the new character.
•
To delete numbers, press a or b to display [Delete], and then press [Delete].
-
Select the fax or telephone numbers you want to delete by pressing them to display a red check mark,
and then press [OK].
3. Press
.
Related Information
227
Dial a Number Using One Touch Dial
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Press the One Touch button assigned to the fax or telephone number you want to dial.
To dial One Touch numbers 1 to 4, press the One Touch button. To dial One Touch numbers 5 to 8, hold
down Shift as you press the One Touch button.
4. Press Start.
Related Information
228
Touch Dial Numbers
Store One Touch Dial Numbers
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
You can store eight One Touch Dial numbers on the four One Touch buttons. To access One Touch Dial Numbers
5 to 8, hold down Shift as you press the One Touch button.
1. Press
(FAX).
2. Press the One Touch button where you want to store the number.
If a number is not stored there, the LCD displays [Register Now?].
3. Press a to select [Yes].
4. Enter the telephone or fax number (up to 20 digits), and then press OK.
5. Do one of the following:
•
•
Enter the name using the dial pad (up to 16 characters), and then press OK.
To store the number without a name, press OK.
Related Information
229
Delete One Touch Dial Numbers
Change or Delete One Touch Dial Numbers
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press a three times.
3. Press a or b to display the [One Touch Dial]option, and then press OK.
4. Press the One Touch button you want to change or delete.
5. Do one of the following:
•
To change the stored name and number:
a. Press a.
b. Edit the name and number:
To edit the stored name or number, press d or c to move the cursor to the character you want to
change, and then press Clear.
Enter the correct character, and then press OK.
To delete the stored name and number:
a. Press b.
•
•
b. Press a to confirm.
To exit without making a change, press Stop/Exit.
6. Press Stop/Exit.
Related Information
230
Dial a Number Using Speed Dial
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Load your document.
3. Do one of the following:
•
•
Press
Press
twice and enter the three-digit Speed Dial code.
.
Press the dial pad buttons for the first few letters of the name, and then press OK.
Press a or b to scroll until you find the name you are looking for, and then press OK.
4. Press OK.
5. Press Start.
Related Information
231
Numbers
Store Speed Dial Numbers
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
Use the Speed Dial numbers to store up to 200 numbers with a name.
1. Press
2. Press
(FAX).
twice and enter a three-digit Speed Dial code (001 - 200). Press OK.
If a number is not stored there, the LCD displays [Register Now?].
3. Press a to select [Yes].
4. Enter the telephone or fax number (up to 20 digits), and then press OK.
5. Do one of the following:
•
•
Enter the name using the dial pad (up to 16 characters), and then press OK.
To store the number without a name, press OK.
Related Information
232
Speed Dial Numbers
Change or Delete Speed Dial Numbers
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
You can change or delete Speed Dial Codes.
1. Press
(FAX).
2. Press a three times.
3. Press a or b to display the [Speed Dial]option, and then press OK.
4. Enter the Speed Dial code you want to change or delete, and then press OK.
5. Do one of the following:
•
To change the stored fax or telephone number and name:
a. Press a.
b. Edit the number and name:
To edit the stored number or name, press d or c to move the cursor to the character you want to
change, and then press Clear.
Enter the correct character, and then press OK.
To delete the stored fax or telephone number and name:
a. Press b.
•
•
b. Press a to confirm.
To exit without making a change, press Stop/Exit.
6. Press Stop/Exit.
Related Information
233
Set up Groups for Broadcasting
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
A Group, which can be stored in the Address Book (One Touch Dial or Speed Dial in some models) allows you to
send the same fax message to many fax numbers.
First, you must store each fax number in the Address Book. Then you can include them as numbers in the
Group. Each Group uses up an Address Book (a One Touch Dial, or a Speed Dial in some models) number.
Applicable Models
Maximum number of Group
20 groups
Maximum numbers in a large
Group
MFC-L2690DW/MFC-L2690DWXL/
MFC-L2710DW/MFC-L2717DW
207 numbers
MFC-L2730DW/MFC-L2750DW/
MFC-L2750DWXL
20 groups
199 numbers
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press a three times.
3. Press a or b to display the [Setup Groups]option, and then press OK.
4. Do one of the following:
•
To store a Group in a Speed Dial location
Press and then enter the three-digit Speed Dial location, and then press OK.
•
To store a Group in a One Touch Dial location
Press a One Touch button.
5. Use the dial pad to enter a Group number (01 to 20), and then press OK.
6. Add numbers to the Group:
•
To add Speed Dial Numbers
Press
and then enter the three-digit Speed Dial location.
•
To add one Touch Dial Numbers
press the One Touch keys one after the other.
The LCD will display selected Speed Dial numbers with a # and One Touch Dial numbers with a * (for
example *006, #009).
7. Press OK when you finish adding numbers.
8. Enter the Group name using the dial pad (up to 16 characters).
9. Press OK.
10. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
[(Fax)]> [Address Book].
2. Do the following steps:
234
a. Press [Edit]> [Setup Groups]> [Name].
b. Enter the Group name (up to 16 characters) using the LCD, and then press [OK].
c. Press [Add/Delete].
d. Add Address Book numbers to the Group by pressing them to display a red checkmark, and then press
[OK].
e. Read and confirm the displayed list of names and numbers you have selected, and then press [OK]to
save your Group.
To store another Group for broadcasting, repeat these steps.
3. Press
.
Related Information
235
Broadcasting Group Name
Change a Broadcasting Group Name
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press a three times.
3. Press a or b to display the [Setup Groups]option, and then press OK.
4. Do one of the following:
•
To change the Group name of a Group stored in a Speed Dial location
Press and then enter the three-digit Speed Dial location, and then press OK.
•
To change the Group name of a Group stored in a One Touch Dial location
Press a One Touch button.
5. Press a to change the stored Group information.
6. Press OK.
7. To edit the name, press d or c position the cursor under the character you want to change. Then press Clear
to delete it, and enter the correct character using the dial pad.
When you are finished editing, press OK.
8. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
[(Fax)]> [Address Book]> [Edit]> [Change].
2. Press a or b to display the Group you want, and then press it.
3. Press [Name].
4. Enter the new Group name (up to 16 characters) using the LCD, and then press [OK].
How to change the stored name:
To change a character, press d or c to position the cursor to highlight the incorrect character, and then
press
Enter the new character.
5. Press [OK].
6. Press
.
.
Related Information
236
Broadcasting Group
Delete a Broadcasting Group
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press a three times.
3. Press a or b to display the [Setup Groups]option, and then press OK.
4. Do one of the following:
•
To delete a Group stored in a Speed Dial location
Press and then enter the three-digit Speed Dial location, and then press OK.
•
To delete a Group stored in a One Touch Dial location
Press a One Touch button.
5. Press b to delete the Group.
6. Press a to confirm.
7. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
[(Fax)]> [Address Book]> [Edit]> [Delete].
2. Press a or b to display the Group you want, and then press it.
3. Press [OK].
4. Press
.
Related Information
237
Broadcasting Group Member
Add or Delete a Broadcasting Group Member
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press a three times.
3. Press a or b to display the [Setup Groups]option, and then press OK.
4. Do one of the following:
•
To change the numbers of a Group stored in a Speed Dial location
Press and then enter the three-digit Speed Dial location, and then press OK.
•
To change the numbers of a Group stored in a One Touch Dial location
Press a One Touch button.
5. Press a to change the numbers stored in the Group.
6. Add or delete One Touch or Speed Dial numbers
•
To add One Touch numbers
Press d or c to position the cursor just after the last number.
Then press the One Touch button of the number you want to add.
To add Speed Dial numbers
•
Press d or c to position the cursor just after the last number.
Then press
and then enter the three-digit Speed Dial location of the number you want to add.
•
To delete One Touch or Speed Dial numbers, press d or c to position the cursor under the number you
want to delete, and then press Clear.
When you are finished editing, press OK.
7. Press OK.
8. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
[(Fax)]> [Address Book]> [Edit]> [Change].
2. Press a or b to display the Group you want, and then press it.
3. Press a or b to display [Add/Delete], and then press it.
4. Press a or b to display the number you want to add or delete.
5. Do the following for each number you want to change:
•
•
To add a number to the Group, press the check box of the number to add a check mark.
To delete a number from the Group, press the check box of the number to remove the check mark.
6. Press [OK].
7. Press [OK].
8. Press
.
238
Dial Access Codes and Credit Card Numbers
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Sometimes you may want to choose from several long-distance carriers when you send a fax. Rates may vary
depending on the time and destination. To take advantage of low rates, you can store the access codes of long-
distance carriers and credit card numbers as Address Book numbers.
You can store these long dialing sequences by dividing them and setting them up as separate Address Book
numbers in any combination. You can even include manual dialing using the dial pad.
For example: You might have stored '555' and '7000' in your machine as shown in the following table.
Applicable Models
'555' stored in
'7000' stored in
MFC-L2690DW/MFC-L2690DWXL/
MFC-L2710DW/MFC-L2717DW
Quick Dial: 003
Quick Dial: 002
MFC-L2730DW/MFC-L2750DW/
MFC-L2750DWXL
Address Book: Brother 1
Address Book: Brother 2
You can use them both to dial '555-7000' by using the following procedure.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press
twice, 003.
3. Press OK.
4. Press
twice, 002.
5. Press OK.
6. Press Start.
The machine will dial '555-7000'.
To temporarily change a number, you can substitute part of the number by pressing it using the dial pad. For
example, to change the number to '555-7001', you could enter the number (555) using Speed Dial 003, and then
press 7001 using the dial pad.
If you must wait for another dial tone or signal at any point in the dialing sequence, create a pause in the
number by pressing Redial/Pause.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press
[(Fax)]> [Address Book].
2. Press a or b to display the number of Brother 1.
3. Press the number.
4. Press [Apply].
5. Press [Options].
6. Press a or b to display the [Address Book]option, and then press it.
7. Press a or b to display the number of Brother 2.
8. Press the number.
240
9. Press [Apply].
10. Press [Fax Start].
The machine will dial '555-7000'.
To temporarily change a number, you can substitute part of the number by pressing it using the LCD. For
example, to change the number to '555-7001', you could enter the number (Brother 1: 555) using Address Book,
press [Apply], and then press 7001 using the LCD.
If you must wait for another dial tone or signal at any point in the dialing sequence, create a pause in the
number by pressing [Pause].
Related Information
241
Voice Mail
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
This feature is available only in the USA and Canada.
If you have Voice Mail on the same telephone line as your Brother machine, Voice Mail and the Brother machine
will conflict with each other when receiving incoming calls.
For example, if your Voice Mail is set to answer after four rings and your Brother machine is set to answer after
two rings, then your Brother machine will answer first. This will prevent callers from being able to leave a
message in your Voice Mail.
Similarly, if your Brother machine is set to answer after four rings and your Voice Mail is set to answer after two
rings, then your Voice Mail will answer first. This will prevent your Brother machine from being able to receive an
incoming fax, since Voice Mail cannot transfer the incoming fax back to the Brother machine.
To avoid conflicts between your Brother machine and your Voice Mail service, do one of the following:
•
Get the Distinctive Ring service from your telephone company. Distinctive Ring is a feature of your Brother
machine that allows a person with one line to receive fax and voice calls through two different telephone
numbers on that one line.
Brother uses the term ’Distinctive Ring,’ but telephone companies market the service under a variety of
names, such as Custom Ringing, Personalized Ring, Smart Ring, Ident-A-Ring, Ident-A-Call, Data Ident-A-
Call, Teen Ring, and SimpleBiz Fax & Alternate Number Ringing. This service establishes a second
telephone number on the same line as your existing telephone number, and each number has its own ring
pattern. Typically, the original number rings with the standard ring pattern and is used for receiving voice
calls, and the second number rings with a different ring pattern and is used for receiving faxes.
•
Set your Brother machine’s Receive Mode to "Manual". Manual Mode requires you answer every incoming
call if you want to be able to receive a fax. If the incoming call is a telephone call, then complete the call as
you normally would. If you hear fax sending tones you must transfer the call to the Brother machine.
Unanswered fax and voice calls will go to your Voice Mail.
Related Information
Related Topics:
243
Distinctive Ring
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
This feature is available only in the USA and Canada.
Distinctive Ring is a function of your Brother machine that allows a person with one line to receive fax and voice
calls through two different phone numbers on that one line. Brother uses the term "Distinctive Ring," but
telephone companies market the service under a variety of names, such as Custom Ringing, Personalized Ring,
Smart Ring, Ident-A-Ring, Ident-A-Call, Data Ident-A-Call, Teen Ring, and SimpleBiz Fax & Alternate Number
Ringing. This service establishes a second telephone number on the same line as your existing telephone
number, and each number has its own ring pattern. Typically, the original number rings with the standard ring
pattern and is used for receiving voice calls, and the second number rings with a different ring pattern and is
used for receiving faxes.
•
•
You must pay for your telephone company’s Distinctive Ring service before you program the machine to
work with it.
Contact your telephone company for availability and rates.
What does your telephone company’s ‘Distinctive Ring’ do?
Your telephone company’s Distinctive Ring service allows you to have more than one number on the same
telephone line. If you need more than one telephone number, it is cheaper than paying for an extra line.
Each telephone number has its own distinctive ring pattern, so you will know which telephone number is ringing.
This is one way to have a separate telephone number for your machine.
Contact your telephone company for availability and rates.
What does Brother’s ‘Distinctive Ring’ do?
The Brother machine has a Distinctive Ring feature that allows you to use your machine to take full advantage of
the telephone company’s Distinctive Ring service. The new telephone number on your line can only receive
faxes.
You must pay for your telephone company’s Distinctive Ring service before you program the machine to
work with it.
Do you have Voice Mail?
If you have Voice Mail on the telephone line where you will install your new machine, there is a strong possibility
that Voice Mail and the machine will conflict with each other while receiving incoming calls. However, the
Distinctive Ring feature allows you to use more than one number on your line, so both Voice Mail and the
machine can work together without any problems. If each one has a separate telephone number, neither will
interfere with the other’s operations.
If you decide to get the Distinctive Ring service from the telephone company, you must register the new
Distinctive Ring pattern they give you. This is so your machine can recognize its incoming calls.
You can change or cancel the Distinctive Ring pattern at any time. You can switch it off temporarily, and turn
it back on later. When you get a new fax number, make sure you reset this feature.
Before you choose the ring pattern to register
You can register only one Distinctive Ring pattern with the machine. Some ring patterns cannot be registered.
The ring patterns below are supported by your Brother machine. Register the one your telephone company gives
you.
244
Ring Pattern
Rings
1
short-short or long-long
2
3
4
short-long-short
short-short-long
very long
(normal pattern)
•
•
Ring Pattern #1 is often called Short-Short and is the most commonly used.
If the ring pattern you received is not on this chart, contact your telephone company and ask for one
that is shown.
•
•
The machine will answer only calls to its registered number.
The first two rings are silent on the machine. This is because the fax must <<listen>> to the ring pattern (to
compare it to the pattern that was ‘registered’). (Other telephones on the same line will ring.)
•
If you program the machine correctly, it will recognize the registered ring pattern of the ‘fax number’ within
two ring patterns and then answer with a fax tone. When the ‘voice number’ is called, the machine will not
answer.
Related Information
Related Topics:
245
Home > Fax > Telephone Services and External Devices > Distinctive Ring > Register the Distinctive Ring
Pattern
Register the Distinctive Ring Pattern
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
This feature is available only in the USA and Canada.
After you set the Distinctive Ring feature to [On], your Distinctive Ring number will receive faxes automatically.
The receive mode is automatically set to [Manual]and you cannot change it to another receive mode while
Distinctive Ring is set to [On]. This ensures the Brother machine will only answer the Distinctive Ring number
and not interfere when your main telephone number is called.
When Distinctive Ring is on, the LCD displays [D/R]as the Receive Mode.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Miscellaneous]option, and then press OK.
5. Press a or b to display the [Distinctive]option, and then press OK.
6. Press a or b to display the [On]option, and then press OK.
7. Press a or b to display the prestored ring pattern you want to use, and then press OK.
•
You will hear each pattern as you scroll through the four patterns. Make sure you select the pattern that
the telephone company gave you.
8. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Miscellaneous]> [Distinctive].
2. Do one of the following:
•
•
If you have not registered the Distinctive Ring pattern, press [Distinctive], and then press [On].
If you have already registered the Distinctive Ring pattern, and want to change the pattern, proceed to
Ring Pattern setting.
3. Press [Ring Pattern].
4. Press the stored ring pattern you want, and then press [OK].
You will hear each pattern as you press the four buttons. Make sure you select the pattern that the telephone
company gave you.
5. Press
.
Distinctive Ring is now set to [On].
If you do not want to receive faxes on your Distinctive Ring number, you can turn off Distinctive Ring. The
machine will stay in [Manual]receive mode so you must set the Receive Mode again.
246
Turn Off Distinctive Ring
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
This feature is available only in the USA and Canada.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Miscellaneous]option, and then press OK.
5. Press a or b to display the [Distinctive]option, and then press OK.
6. Press a or b to display the [Off]option, and then press OK.
7. Press Stop/Exit.
If you turn off Distinctive Ring, the machine will stay in Manual Mode. You must set the Receive Mode again.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Miscellaneous]> [Distinctive]>
[Distinctive].
2. Press [Off].
3. Press
.
If you turn off Distinctive Ring, the machine will stay in Manual Mode. You must set the Receive Mode again.
Related Information
248
Caller ID
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
The Caller ID feature lets you use the Caller ID subscriber service offered by many local telephone companies.
This service displays the telephone number, or name if it is available, of your caller as the line rings.
•
•
The [# Unavailable]message means the call originated outside your Caller ID service area.
The [Private Call]message means the caller has intentionally blocked transmission of Caller ID
information.
Call your telephone company for more information.
Once you answer a call, the Caller ID information disappears from the LCD and is stored in Caller ID memory.
View the list or select a number and add it to the Address Book (the Speed Dial or One the Touch Dial in some
models), or delete it from the history.
You can print a list of the Caller ID information received by your machine.
•
•
•
This feature is not available in some countries.
This feature may not be available in certain areas of the USA and Canada.
The Caller ID service varies with different carriers. Contact your local telephone company to learn about
the service available in your area.
Related Information
249
External TAD (Telephone Answering Device)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the
TAD answers a call, your machine will “listen” for the CNG (fax calling) tones sent by a sending fax machine. If it
hears them it will take over the call and receive the fax. If it does not hear them, it will let your TAD take a voice
message and the LCD will show [Telephone].
The external TAD must answer within four rings (we recommend setting it to two rings). This is because your
machine cannot hear the CNG tones until the external TAD has picked up the call. The sending machine will
send CNG tones for only eight to ten seconds longer. We do not recommend using the toll saver feature on your
external TAD if it needs more than four rings to activate it.
Unless you are using Distinctive Ring, the TAD must be connected to the EXT. jack of the machine.
•
If you subscribe to your telephone company’s Distinctive Ring service:
You may connect an external TAD to a separate wall jack only if you subscribe to your telephone company’s
Distinctive Ring service, have registered the distinctive ring pattern on your machine, and use that number as
a fax number. The recommended setting is at least four rings on the external TAD when you have the
telephone company’s Distinctive Ring service. You cannot use the Toll Saver setting.
•
If You Do Not Subscribe to the Distinctive Ring Service:
You must plug your TAD into the EXT. jack of your machine. If your TAD is plugged into a wall jack, both your
machine and the TAD will try to control the telephone line. (See the illustration.)
1
IMPORTANT
DO NOT connect a TAD elsewhere on the same telephone line.
If you have problems receiving faxes, reduce the Ring Delay setting on your external TAD.
Related Information
250
Device) > Connect an External TAD
Connect an External TAD
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
The external TAD must be plugged into the back of the machine, into the jack labeled EXT. Your machine cannot
work correctly if you plug the TAD into a wall jack (unless you are using Distinctive Ring).
1. Plug the telephone line cord from the telephone wall jack into the back of the machine, in the jack labeled
LINE.
2. Plug the telephone line cord from your external TAD into the back of the machine, in the jack labeled EXT.
(Make sure this cord is connected to the TAD at the TAD’s telephone line jack, and not its handset jack.)
3. Set your external TAD to four rings or less. (The machine’s Ring Delay setting does not apply.)
4. Record an outgoing message on your external TAD.
5. Set the TAD to answer calls.
6. Set the Receive Mode on your machine to [External TAD].
Related Information
251
Device) > Record an Outgoing Message (OGM) on the External TAD
Record an Outgoing Message (OGM) on the External TAD
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
1. Record 5 seconds of silence at the beginning of your message. This allows your machine time to listen for fax
tones.
2. Limit your speaking to 20 seconds.
3. End your 20-second message by giving your Fax Receive Code for people sending manual faxes. For
example: “After the beep, leave a message or press *51 and Start to send a fax.”
NOTE
We recommend beginning your OGM with an initial 5 second silence because the machine cannot hear
fax tones over a loud voice. You may try leaving out this pause, but if your machine has trouble receiving
faxes, then you should re-record the OGM to include it.
Related Information
252
an External or Extension Telephone
Connect an External or Extension Telephone
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can connect a separate telephone to your machine as shown in the diagram below.
Connect the telephone line cord to the jack labeled EXT.
Before you connect an external telephone, remove the protective cap (3) from the EXT. jack on the machine.
Related Information
254
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > Operation
from External and Extension Telephones
Operation from External and Extension Telephones
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Use extension telephones
If you answer a fax call at an extension telephone, you can make your machine receive the fax by pressing the
Fax Receive Code *51.
If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at an
extension telephone by pressing the Telephone Answer Code #51.
Use an external telephone (Connected to the EXT. jack of the machine)
If you answer a fax call at the external telephone connected to the EXT. jack of the machine, you can make the
machine receive the fax by pressing [
]> [Fax Start]or Start, and selecting [Receive]or b.
If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the
external telephone by pressing [Pickup]or Hook.
If you answer a call and no one is on the line:
You should assume that you’re receiving a manual fax.
Press *51 and wait for the chirp or until the LCD displays [Receiving], and then hang up.
You can also use the Easy Receive feature to make your machine automatically take the call.
Related Information
255
Home > Fax > Telephone Services and External Devices > External and Extension Telephones > If You Use
a Non-Brother Cordless External Handset
If You Use a Non-Brother Cordless External Handset
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
If your non-Brother cordless telephone is connected to the EXT. jack of the machine and you typically carry the
cordless handset elsewhere, it is easier to answer calls during the Ring Delay.
If you let the machine answer first, you must go to the machine so you can press [Pickup]or Hook to transfer
the call to the cordless handset.
Related Information
256
Remote Codes
Use the Remote Codes
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Fax Receive Code
If you answer a fax call on an extension telephone, you can tell your machine to receive it by pressing the Fax
Receive Code *51. Wait for the chirping sounds, and then replace the handset.
If you answer a fax call at the external telephone, you can make the machine receive it by pressing the buttons in
the following table:
Applicable Models
To make the machine receive the fax
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW Start and then b
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
> Fax Start> Receive
Telephone Answer Code
If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T ring (pseudo/double-ring)
after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T ring off by
pressing #51 (make sure you press this between the rings).
If the machine answers a voice call and pseudo/double-rings for you to take over, you can take the call at the
external telephone by pressing the button in the following table:
Applicable Models
To pick up voice call
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW Hook
Pickup
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Related Information
257
Remote Codes > Change the Remote Codes
Change the Remote Codes
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
The preset Fax Receive Code is *51. The preset Telephone Answer Code is #51. If you are always disconnected
when accessing your External TAD remotely, try changing the three-digit remote codes, for example to ### and
999.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press
(FAX).
2. Press Menu.
3. Press a or b to display the [Fax]option, and then press OK.
4. Press a or b to display the [Setup Receive]option, and then press OK.
5. Press a or b to display the [Remote Codes]option, and then press OK.
6. Press a or b to display the [On]option, and then press OK.
•
To turn off Remote Codes, select the [Off]option.
7. Enter the new Fax Receive Code, and then press OK.
8. Enter the new Telephone Answer Code, and then press OK.
9. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Setup Receive]> [Remote Codes].
2. Do one of the following:
•
To change the Fax Receive Code, press [Fax Receive Code]. Enter the new code, and then press
[OK].
•
To change the Telephone Answer Code, press [Tel Answer]. Enter the new code, and then press
[OK].
•
•
If you do not want to change the Codes, go to the next step.
To turn off (or turn on) the Remote Codes, press [Remote Codes], and then press [Off](or [On]).
3. Press
.
Related Information
258
Multi-line Connections (PBX)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
We suggest you ask the company that installed your PBX to connect your machine. If you have a multi line
system we suggest you ask the installer to connect the unit to the last line on the system. This prevents the
machine being activated each time the system receives telephone calls. If all incoming calls will be answered by
a switchboard operator we recommend setting the Receive Mode to [Manual].
We cannot guarantee that your machine will operate correctly under all circumstances when connected to a PBX.
Any difficulties with sending or receiving faxes should be reported first to the company that handles your PBX.
Related Information
259
Print a Transmission Verification Report
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can use the Transmission Verification Report as proof that you sent a fax. This report lists the receiving
party's name or fax number, the time and date of transmission, duration of transmission, number of pages sent,
and whether or not the transmission was successful.
There are several settings available for the Transmission Verification Report:
On
Prints a report after every fax you send.
On (+Image)
Prints a report after every fax you send.
A portion of the fax’s first page appears on the report.
Error only
Error only (+Image)
Off
Prints a report if your fax is unsuccessful due to a transmission error.
Error onlyis the factory setting.
Prints a report if your fax is unsuccessful due to a transmission error.
A portion of the fax’s first page appears on the report.
Your Brother machine does not print any reports after sending faxes.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Report Setting]option, and then press OK.
4. Press a or b to display the [Transmission]option, and then press OK.
5. Press a or b to display the [Error Only], [ErrorOnly+Image], [Off], [On (+Image)], or [On
(+Image)]option, and press OK.
6. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Report Setting]> [Transmission].
2. Press a or b to select the option you want.
If you select [On+Image]or [Error only (+Image)], the image will not appear on the Transmission
Verification Report if Real Time Transmission is set to [On].
3. Press
.
If the transmission is successful, OK appears next to RESULT on the Transmission Verification Report. If the
transmission is not successful, NG appears next to RESULT.
Related Information
261
Print a Fax Journal
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can set the machine to print a Fax Journal at specific intervals (every 50 faxes, 6, 12 or 24 hours, 2 or 7
days).
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
1. Press Menu.
2. Press a or b to display the [Fax]option, and then press OK.
3. Press a or b to display the [Report Setting]option, and then press OK.
4. Press a or b to display the [Journal Period]option, and then press OK.
5. Press a or b to display the [Every 50Faxes], [Every 6Hours], [Every 12Hours], [Every
24Hours], [Every 2Days], [Every 7Days], or [Off]option, and then press OK.
•
6, 12, 24 hours, 2 or 7 days
The machine will print the report at the selected time and then erase all jobs from its memory. If the
machine's memory becomes full with 200 jobs before the time you selected has passed, the machine will
print the Journal early and then erase all jobs from the memory. If you want an extra report before it is due
to print, you can print it without erasing the jobs from the memory.
•
Every 50 Faxes
The machine will print the Journal when the machine has stored 50 jobs.
6. If you chose Every 7 Days, press a or b to display the [Every Monday], [Every Tuesday], [Every
Wednesday], [Every Thursday], [Every Friday], [Every Saturday]or [Every Sunday]option,
and then press OK.
7. If you selected 6, 12, 24 hours, 2 or 7 days, do one of the following to enter the time to start printing:
•
If you selected [12h Clock]in the Date&Time setting, enter the time in 12-hour format, and then press
OK.
Press a or b to display the [AM]or [PM]option, and then press OK.
•
If you selected [24h Clock]in the Date&Time setting, enter the time in 24-hour format, and then press
OK.
(For example, enter 19:45 for 7:45 PM.)
8. Press Stop/Exit.
MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Fax]> [Report Setting]> [Journal Period]>
[Journal Period].
2. Press a or b to select an interval.
•
•
6, 12, 24 hours, 2 or 7 days
The machine will print the report at the selected time and then erase all jobs from its memory. If the
machine's memory becomes full with 200 jobs before the time you selected has passed, the machine will
print the Journal early and then erase all jobs from the memory. If you want an extra report before it is due
to print, you can print it without erasing the jobs from the memory.
Every 50 Faxes
The machine will print the Journal when the machine has stored 50 jobs.
262
3. If you selected 6, 12, 24 hours, 2 or 7 days, press [Time]and enter the time using the LCD, and then press
[OK].
4. If you selected [Every 7 Days], press [Day].
5. Press a or b to display the [Every Monday], [Every Tuesday], [Every Wednesday], [Every
Thursday], [Every Friday], [Every Saturday]or [Every Sunday]option, and then press the first
day of the 7-day countdown.
6. Press
.
Related Information
263
(Windows)
Configure PC-FAX (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Before sending faxes using PC-FAX, personalize the send options in each tab of the PC-FAX Setup dialog box.
1. Do one of the following:
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Setup Sending.
•
Windows 8 and Windows 10
Launch
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click PC-FAX in the left navigation bar, and then click Setup Sending.
The PC-FAX Setup dialog box appears.
2. Do one of the following:
•
Click the User Information tab, and then type your user information in the fields.
Each Microsoft account can have its own customized User Information screen for custom fax headers and
cover pages.
•
•
Click the Sending tab, and then type the number needed to access an outside line (if needed) in the
Outside line access field. Select the Include header check box to include the header information.
Click the Address Book tab, and then select the address book you want to use for PC-FAX from the
Select Address Book drop-down list.
3. Click OK.
267
Address Book (Windows) > Add a Member to your PC-FAX Address Book (Windows)
Add a Member to your PC-FAX Address Book (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Add new people and their fax information to the PC-Fax Address Book if you want to send a fax using Brother
PC-Fax software.
1. Do one of the following:
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Address Book (Send).
•
Windows 8 and Windows 10
Launch
already selected). Click PC-FAX in the left navigation bar, and then click Address Book (Send).
The Address Book dialog box appears.
(Brother Utilities), and then click the drop-down list and select your model name (if not
2. Click
.
The Address Book Member Setup dialog box appears.
270
3. Type the member's information in the corresponding fields. Only the Name field is required.
4. Click OK.
Related Information
271
Address Book (Windows) > Create a Group in your PC-FAX Address Book (Windows)
Create a Group in your PC-FAX Address Book (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Create a group to broadcast the same PC-FAX to several recipients at one time.
1. Do one of the following:
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Address Book (Send).
•
Windows 8 and Windows 10
Launch
already selected). Click PC-FAX in the left navigation bar, and then click Address Book (Send).
The Address Book dialog box appears.
(Brother Utilities), and then click the drop-down list and select your model name (if not
2. Click
.
The Address Book Group Setup dialog box appears.
272
3. Type the name of the new group in the Group Name field.
4. In the Available Names field, select each name you want to include in the group, and then click Add >>.
Members added to the group appear in the Group Members box.
5. When finished, click OK.
Each group can contain up to 50 members.
Related Information
273
Address Book (Windows) > Edit Member or Group Information in your PC-FAX Address Book (Windows)
Edit Member or Group Information in your PC-FAX Address Book
(Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
1. Do one of the following:
•
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Address Book (Send).
Windows 8 and Windows 10
Launch
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click PC-FAX in the left navigation bar, and then click Address Book (Send).
The Address Book dialog box appears.
2. Select the member or group you want to edit.
3. Click
(Properties).
4. Change the member or group information.
5. Click OK.
Related Information
274
Address Book (Windows) > Delete a Member or Group in your PC-FAX Address Book (Windows)
Delete a Member or Group in your PC-FAX Address Book (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
1. Do one of the following:
•
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Address Book (Send).
Windows 8 and Windows 10
Launch
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click PC-FAX in the left navigation bar, and then click Address Book (Send).
The Address Book dialog box appears.
2. Select the member or group you want to delete.
3. Click
(Delete).
4. When the confirmation dialog box appears, click OK.
Related Information
275
Address Book (Windows) > Export your PC-FAX Address Book (Windows)
Export your PC-FAX Address Book (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can export the Address Book as an ASCII text file (*.csv), a vCard (an electronic business card), or Remote
Setup Dial Data and save it on your computer.
•
You cannot export the group settings when you export the Address Book data.
1. Do one of the following:
•
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Address Book (Send).
Windows 8 and Windows 10
Launch
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click PC-FAX in the left navigation bar, and then click Address Book (Send).
The Address Book dialog box appears.
2. Click the File menu, and then select Export.
3. Select one of the following:
•
•
Text
The Select Items dialog box appears. Go to step 4.
vCard
You must select the member you want to export from your address book before selecting this option.
Browse to the folder where you want to save the vCard, type the vCard name in the File name field,
and then click Save.
276
•
Remote Setup Dial Data
Browse to the folder where you want to save the data, type the file name in the File name field, and
then click Save.
4. In the Available Items field, select the data you want to export, and then click Add >>.
Select and add the items in the order you want them listed.
5. If you are exporting to an ASCII file, under the Divide Character section, select the Tab or Comma option to
separate the data fields.
6. Click OK.
7. Browse to the folder on your computer where you want to save the data, type the file name, and then click
Save.
Related Information
277
Address Book (Windows) > Import Information to your PC-FAX Address Book (Windows)
Import Information to your PC-FAX Address Book (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
You can import ASCII text files (*.csv), vCards (electronic business cards), or Remote Setup Dial Data into your
Address Book.
1. Do one of the following:
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Address Book (Send).
•
Windows 8 and Windows 10
Launch
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click PC-FAX in the left navigation bar, and then click Address Book (Send).
The Address Book dialog box appears.
2. Click the File menu, and then select Import.
3. Select one of the following:
•
•
•
Text
The Select Items dialog box appears. Go to step 4.
vCard
Go to step 7.
Remote Setup Dial Data
Go to step 7.
4. In the Available Items field, select the data you want to import, and then click Add >>.
278
You must select and add fields from the Available Items list in the same order they are listed in the import
text file.
5. If you are importing an ASCII file, under the Divide Character section, select the Tab or Comma option to
separate the data fields.
6. Click OK.
7. Browse to the folder where you want to import the data, type the file name, and then click Open.
Related Information
279
Send a Fax Using PC-FAX (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
PC-FAX supports only black and white faxes. A black and white fax will be sent even if the original data is color
and the receiving fax machine supports color faxes.
1. Create a file in any application on your computer.
2. Select the print command in your application.
3. Select Brother PC-FAX as your printer, and then complete your print operation.
The Brother PC-FAX dialog box appears.
4. Type a fax number using one of the following methods:
•
Click the numbers on the dial pad to type the number, and then click Add Send Address.
If you select the Dial Restriction check box, a confirmation dialog box will appear for you to re-type the fax
number using the keyboard. This feature helps to prevent transmissions to the wrong destination.
•
Click the Address Book button, and then select a member or group from the Address Book.
If you make a mistake, click All Clear to delete all entries.
5. To include a cover page, select the Add Cover Page check box. You can also click
to create or edit a
cover page.
6. Click Start to send the fax.
•
•
To cancel the fax, click Cancel.
To redial a number, click Redial to show the last five fax numbers, select a number, and then click Start.
Related Information
280
Faxes Using PC-FAX Receive (Windows)
Receive Faxes Using PC-FAX Receive (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Brother's PC-FAX Receive software lets you view and store faxes on your computer. It is automatically installed
when you install the Brother software and drivers and works on locally or network-connected machines.
•
PC-FAX Receive supports only black and white faxes.
When you turn off your computer, your machine will continue to receive and store faxes in your Brother
machine's memory. The machine's LCD will display the number of stored faxes received. When you start this
application, the software will transfer all received faxes to your computer at once. You can enable the Backup
Print option if you want the machine to print a copy of the fax before the fax is sent to your computer, or before
the computer is switched off. You can configure the Backup Print settings from your Brother machine.
Related Information
282
Faxes Using PC-FAX Receive (Windows) > Run Brother's PC-FAX Receive on Your Computer (Windows)
Run Brother's PC-FAX Receive on Your Computer (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
We recommend selecting the Start PC-FAX Receive on computer startup check box so that the software
runs automatically and can transfer any faxes upon computer startup.
1. Do one of the following:
•
Windows 7
Click
(Start) > All Programs > Brother > Brother Utilities.
Click the drop-down list and select your model name (if not already selected). Click PC-FAX in the left
navigation bar, and then click Receive.
•
Windows 8 and Windows 10
Launch
(Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click PC-FAX in the left navigation bar, and then click Receive.
2. Confirm the message and click Yes.
The PC-FAX Receive window appears. The
(PC-Fax Receive (Ready)) icon also appears in your
computer task tray.
Related Information
283
Set Up Your Computer for PC-FAX Receiving (Windows)
Set Up Your Computer for PC-FAX Receiving (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
1. Double-click the
(PC-Fax Receive (Ready)) icon in your computer task tray.
The PC-FAX Receive window appears.
2. Click Settings.
3. Configure these options as needed:
Preferences
Configure to start PC-FAX Receive automatically when you start Windows.
Save
Configure the path to save PC-FAX files and select the received document format.
Upload to
Configure the path to the SharePoint server and select the option to upload automatically or manually
(available only for Administrators).
Device
Select the Brother machine that you want to receive PC-FAX.
Lock (available only for Administrators)
Restrict users who do not have administrator privileges from configuring the settings options shown above.
4. Click OK.
284
Add Your Brother Machine to PC-FAX Receiving (Windows)
Add Your Brother Machine to PC-FAX Receiving (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
•
If you installed the machine following the instructions for a network user, then the machine should already
be configured for your network.
1. Double-click the
(PC-Fax Receive (Ready)) icon in your computer task tray.
The PC-FAX Receive window appears.
2. Click Settings.
3. Click Device > Add.
4. Select the appropriate connection method.
Select your machine from the automatic search results below.
Connected Brother machines will be displayed. Select a device from the list. Click OK.
Specify your machine by IP address
Type the machine's IP address in the IP Address field, and then click OK.
286
5. To change the computer name that will appear on the machine's LCD, type the new name in the Enter your
PC display name (Max 15 Characters) field.
6. Click OK.
Related Information
287
Faxes Using PC-FAX Receive (Windows) > View Received PC-FAX Messages (Windows)
View Received PC-FAX Messages (Windows)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
Receiving Status
Icon
Indicated Status
Standby mode
No unread messages
Receiving messages
Messages received
Unread messages
1. Double-click the
(PC-Fax Receive (Ready)) icon in your computer task tray.
The PC-FAX Receive window appears.
2. Click any faxes in the list to view them.
3. When finished, click
in the right top corner of the window to close it.
288
Even after closing the window, PC-FAX Receive is active and the
(PC-Fax Receive (Ready) ) icon will
remain in your computer task tray. To close PC-FAX Receive, click the icon in the computer task tray and
click Close.
Related Information
289
Send Faxes from Your Application (Mac)
Related Models: MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW/MFC-L2730DW/
MFC-L2750DW/MFC-L2750DWXL
PC-FAX supports only black and white faxes. A black and white fax will be sent even if the original data is color
and the receiving fax machine supports color faxes.
1. Create a document in a Mac application.
2. From an application, such as Apple TextEdit, click the File menu, and then select Print.
3. Click the application pop-up menu, and then select the Send Fax option.
4. Click the Output pop-up menu, and then select the Facsimile option.
5. Type a fax number in the Input Fax Number field, and then click Add.
The fax number is displayed in the Destination Fax Numbers field.
291
To send a fax to more than one number, click the Add button after entering the first fax number and type
the next fax number. The destination fax numbers will be listed in the Destination Fax Numbers field.
6. Click Print to send the fax.
Related Information
292
Supported Basic Network Features
The print server supports various features depending on the operating system. Use this table to see which
network features and connections are supported by each operating system.
Operating Systems
Windows 7
Windows 8
Windows 10
Windows Server
2008/2008 R2/2012/2012
R2/2016
macOS v10.10.5
macOS v10.11.x
macOS v10.12.x
Printing
Yes
Yes
Yes
Yes
Yes
Scanning
Yes
Yes
PC Fax Send (Available only
for certain models)
PC Fax Receive (Available
only for certain models)
Yes
BRAdmin Light
Yes
Yes
Yes
Yes
Yes
Yes
Yes
BRAdmin Professional
Web Based Management
Yes
Yes
Remote Setup (Available only
for certain models)
Status Monitor
Yes
Yes
Yes
Driver Deployment Wizard
Yes
Vertical Pairing (Available only
for certain models)
•
•
download the latest version of Brother's BRAdmin Light.
download the latest version of Brother's BRAdmin Professional utility.
Related Information
• Network
294
Software and Utilities
Learn about Network Management Software and Utilities
Web Based Management
Web Based Management is a utility that uses a standard web browser to manage your machine using the Hyper
Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). Type your
machine's IP address into your web browser to access and change your print server settings.
BRAdmin Light (Windows)
BRAdmin Light is a utility for the initial setup of Brother network-connected devices. This utility can search for
Brother products on your network, view the status and configure the basic network settings, such as IP address.
Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download
BRAdmin Light.
•
If using Windows Firewall, or the firewall function of an anti-spyware or antivirus application, temporarily
disable them. When you are sure you can print, configure the software settings following the
instructions.
BRAdmin Professional (Windows)
BRAdmin Professional is a utility for more advanced management of network-connected Brother devices. This
utility can search for Brother products on your network and view the device status from an easy-to-read Windows
Explorer-style screen that changes color to identify the status of each device. You can configure network and
device settings, and update device firmware from a Windows computer on your LAN. BRAdmin Professional can
also log activity of Brother devices on your network and export the log data. For users who want to monitor
locally-connected machines, install the Print Auditor Client software on the client computer. This utility allows you
to use BRAdmin Professional to monitor machines that are connected to a client computer via the USB interface.
•
•
download the latest version of Brother's BRAdmin Professional utility.
Node name: The node name appears in the current BRAdmin Professional window. The default node
name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where
"xxxxxxxxxxxx" is your machine's MAC Address / Ethernet address).
•
If using Windows Firewall, or the firewall function of an anti-spyware or antivirus application, temporarily
disable them. When you are sure you can print, configure the software settings following the
instructions.
Remote Setup (Windows and Mac) (Available only for certain models)
Remote Setup is a program for configuring many machine and network settings from either a Windows or a Mac
application. When you start this application, the settings on your machine are automatically downloaded to your
computer and displayed on your computer screen. If you change the settings, you can upload them directly to the
machine.
(Windows)
This utility can be used with either a USB or a network connection.
(Mac)
•
download the Remote Setup.
•
This utility can be used with a USB connection.
Related Information
296
Before Configuring Your Brother Machine for a Wireless Network
Before attempting to configure a wireless network, confirm the following:
•
To achieve optimum results with normal everyday document printing, place the Brother machine as close to
the wireless LAN access point/router as possible with minimal obstructions. Large objects and walls between
the two devices and interference from other electronic devices can affect the data transfer speed of your
documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics,
you may want to consider selecting wired Ethernet for faster data transfer (supported models only), or USB
for the fastest throughput speed.
•
Although the Brother machine can be used in both a wired and wireless network (supported models only),
only one connection method can be used at a time. However, a wireless network connection and Wi-Fi Direct
connection, or a wired network connection (supported models only) and Wi-Fi Direct connection can be used
at the same time.
If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
Related Information
298
Configure Your Machine for a Wireless Network
1. Turn on your computer and insert the Brother installation disc into your computer.
•
•
For Windows, follow these instructions:
For Mac, click Driver Download to go to the Brother Solutions Center. Follow the on-screen instructions
to install printer drivers.
2. The opening screen appears automatically.
Choose your language, and then follow the on-screen instructions.
If the Brother screen does not appear, do the following:
•
(Windows 7)
Go to Computer. Double-click the CD/DVD icon, and then double-click start.exe.
•
(Windows 8 and Windows 10)
Click the
(File Explorer) icon on the taskbar, and then go to Computer (This PC). Double-click
the CD/DVD icon, and then double-click start.exe.
•
If the User Account Control screen appears, click Yes.
3. Choose Wireless Network Connection (Wi-Fi), and then click Next.
4. Follow the on-screen instructions.
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
Related Information
299
Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected
™
Setup (WPS)
Configure Your Machine for a Wireless Network Using the One Push
™
Method of Wi-Fi Protected Setup (WPS)
If your wireless access point/router supports WPS (PBC: Push Button Configuration), you can use WPS from
your machine's control panel menu to configure your wireless network settings.
Routers or access points that support WPS are marked with this symbol:
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Press Menu.
2. Press a or b to select the [Network]option, and then press OK.
3. Press a or b to select the [WLAN]option, and then press OK.
4. Press a or b to select the [WPS]option, and then press OK.
5. When [WLAN Enable?]appears, enable the wireless network.
This will start the wireless setup wizard.
6. When the LCD displays [Start WPS on your wireless access point/router.], press the WPS
button on your wireless access point/router. Then press OK on your machine. Your machine will automatically
detect your wireless access point/router and try to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Network]> [WLAN]> [WPS].
2. When [Switch Network interface to wireless?]appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
3. When the touchscreen displays [Start WPS on your wireless access point/router, then
press [OK].], press the WPS button on your wireless access point/router. Then press [OK]on your
machine. Your machine will automatically detect your wireless access point/router and try to connect to your
wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
300
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
Related Information
Related Topics:
301
Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup
(WPS)
™
Configure Your Machine for a Wireless Network Using the PIN Method
™
of Wi-Fi Protected Setup (WPS)
If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN)
Method to configure your wireless network settings.
®
The PIN Method is one of the connection methods developed by the Wi-Fi Alliance . By submitting a PIN
created by an Enrollee (your machine) to the Registrar (a device that manages the wireless LAN), you can set up
the wireless network and security settings. For more information on how to access WPS mode, see the
instructions provided with your wireless access point/router.
Type A
Connection when the wireless LAN access point/router (1) doubles as the Registrar:
Type B
Connection when another device (2), such as a computer, is used as the Registrar:
302
Routers or access points that support WPS are marked with this symbol:
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
1. Press Menu.
2. Press a or b to select the [Network]option, and then press OK.
3. Press a or b to select the [WLAN]option, and then press OK.
4. Press a or b to select the [WPS w/PIN Code]option, and then press OK.
5. When [WLAN Enable?]appears, enable the wireless network.
This will start the wireless setup wizard.
6. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
7. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
8. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
•
•
The Registrar is usually the wireless LAN access point/router.
The settings page will differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows 7, Windows 8, or Windows 10 computer as a Registrar, complete the
following steps:
9. Do one of the following:
303
•
•
Windows 7
Click
(Start) > Devices and Printers > Add a device.
Windows 8
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > View devices and printers > Add a device.
•
Windows 10
Click
> Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
•
•
To use a Windows 7, Windows 8, or Windows 10 computer as a Registrar, you must register it to your
network in advance. For more information, see the instructions supplied with your wireless LAN access
point/router.
If you use Windows 7, Windows 8, or Windows 10 as a Registrar, you can install the printer driver after
the wireless configuration by following the on-screen instructions. To install the full driver and software
package, use the Brother installation disc.
10. Select your machine and click Next.
11. Type the PIN displayed on the machine's LCD, and then click Next.
12. (Windows 7) Select your network, and then click Next.
13. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
1. Press [Settings]> [All Settings]> [Network]> [WLAN]> [WPS w/ PIN Code].
2. When [Switch Network interface to wireless?]appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
•
•
The Registrar is usually the wireless LAN access point/router.
The settings page will differ depending on the brand of wireless LAN access point/router. For more
information, see the instructions supplied with your wireless LAN access point/router.
If you are using a Windows 7, Windows 8, or Windows 10 computer as a Registrar, complete the
following steps:
6. Do one of the following:
•
(Windows 7)
Click
(Start) > Devices and Printers > Add a device.
•
(Windows 8)
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > View devices and printers > Add a device.
304
•
•
To use a Windows 7, or Windows 8 computer as a Registrar, you must register it to your network in
advance. For more information, see the instructions supplied with your wireless LAN access point/
router.
If you use Windows 7 or Windows 8 as a Registrar, you can install the printer driver after the wireless
configuration by following the on-screen instructions. To install the full driver and software package, use
the Brother installer on the Installer CD-ROM.
7. Select your machine and click Next.
8. Type the PIN displayed on the machine's LCD, and then click Next.
9. (Windows 7) Select your network, and then click Next.
10. Click Close.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
Related Information
Related Topics:
305
Network > Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
Configure Your Machine for a Wireless Network Using the Machine's
Control Panel Setup Wizard
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network Key
12345
•
•
Your access point/router may support the use of multiple WEP keys, however your Brother machine
supports the use of the first WEP key only.
If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this
information.
•
If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
How can I find this information?
-
-
-
Check the documentation provided with your wireless access point/router.
The initial SSID could be the manufacturer's name or the model name.
If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
2. Press Menu.
3. Press a or b to select the [Network]option, and then press OK.
4. Press a or b to select the [WLAN]option, and then press OK.
5. Press a or b to select the [Setup Wizard]option, and then press OK.
6. When [WLAN Enable?]appears, enable the wireless network.
This will start the wireless setup wizard.
7. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears,
press a or b to select the SSID you want.
8. Press OK.
9. Do one of the following:
306
•
If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
Enter the WEP key, and then press OK to apply your settings.
To apply the settings, select [Yes]. To cancel, select [No].
•
•
If your authentication method is Open System and your encryption mode is None, go to the next step.
If your WLAN access point/router supports WPS, [WPS is available]appears. To connect your
machine using the automatic wireless mode, press a. (If you choose [No], enter the Network Key you
wrote down in the first step.) When [Press WPS on rtr]appears, press the WPS button on your
WLAN access point/router, and then press a twice.
10. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network Key
12345
•
•
Your access point/router may support the use of multiple WEP keys, however your Brother machine
supports the use of the first WEP key only.
If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this
information.
•
If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
How can I find this information?
-
-
-
Check the documentation provided with your wireless access point/router.
The initial SSID could be the manufacturer's name or the model name.
If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
2. Press [Settings]> [All Settings]> [Network]> [WLAN]> [Setup Wizard].
3. When [Switch Network interface to wireless?]appears, press [Yes].
This will start the wireless setup wizard. To cancel, press [No].
4. The machine will search for your network and display a list of available SSIDs.
307
If a list of SSIDs is displayed, press a or b to display the SSID to which you want to connect, and then press
the SSID.
5. Press [OK].
6. Do one of the following:
•
If you are using an authentication and encryption method that requires a Network Key, enter the Network
Key you wrote down in the first step.
When you have entered all the characters, press [OK].
•
•
If your authentication method is Open System and your encryption mode is None, go to the next step.
If your WLAN access point/router supports WPS, [The selected access point/router
supports WPS. Use WPS?]appears. To connect your machine using the automatic wireless mode,
press [Yes]. (If you choose [No], enter the Network Key you wrote down in the first step.) When
[Start WPS on your wireless access point/router, then press [Next].]appears,
press the WPS button on your WLAN access point/router, and then press [Next].
7. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install Full Driver & Software Package necessary for
operating your device, insert the Brother installation disc into your computer or go to your model's Downloads
Related Information
Related Topics:
308
Configure Your Machine for a Wireless Network When the SSID Is Not
Broadcast
HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/
MFC-L2717DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need
this information before you continue with the configuration.
1. Check and write down the current wireless network settings.
Network Name (SSID)
Communication Mode
Authentication Method
Encryption Mode
Network Key
Infrastructure
Open System
NONE
WEP
WEP
AES
-
Shared Key
WPA/WPA2-PSK
TKIP
For example:
Network Name (SSID)
HELLO
Communication Mode
Authentication Method
Encryption Mode
Network Key
Infrastructure
WPA2-PSK
AES
12345678
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press Menu.
3. Press a or b to select the [Network]option, and then press OK.
4. Press a or b to select the [WLAN]option, and then press OK.
5. Press a or b to select the [Setup Wizard]option, and then press OK.
6. When [WLAN Enable?]appears, enable the wireless network.
This will start the wireless setup wizard.
7. The machine will search for your network and display a list of available SSIDs. Press a or b to select the
[<New SSID>]option, and then press OK.
8. Enter the SSID name, and then press OK.
9. Press a or b to select the [Infrastructure]option, and then press OK.
10. Press a or b to select the Authentication Method you want, and then press OK.
11. Do one of the following:
•
If you selected the [Open System]option, press a or b to select the Encryption Type [None]or [WEP],
and then press OK.
If you selected the [WEP]option for Encryption Type, enter the WEP key, and then press OK.
309
|
