G B R
CDX-9
Natural Sound Compact Disc Player
Lecteur de disque audionumérique de la série “Natural Sound”
Natural Sound CD-Spieler
Natural Sound Compact Disc-spelare
Lettore di compact disc a suono naturale
Tocadiscos de Discos Compactos de Sonido Natural
Natural Sound CD-speler
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for selecting this YAMAHA compact disc player.
FEATURES
CONTENTS
Caution ......................................................................... 3
Connections .................................................................. 4
Identification of Components ........................................ 5
Basic Operation ............................................................ 7
Random-sequence Play ............................................. 11
Repeat Play ................................................................ 11
Program Play .............................................................. 12
Index Search ............................................................... 13
Track Programming for Recording to Tape ................. 14
CD Synchronized Recording ...................................... 18
Notes about the Remote Control Transmitter ............. 19
Notes about Handling Compact Discs ........................ 19
Troubleshooting .......................................................... 20
Specifications .............................................................. 20
Random Access Programmable Play
Random-Sequence Play
•
•
•
•
•
•
•
Single Track/Entire Disc Repeat Play
Automatic Spacing Capability
Automatic Programming for Recording to Tape
Automatic Peak Level Searching Capability
CD Synchronized Recording with a Compatible
YAMAHA Tape Deck
Display Brightness Changing Capability
Remote Control Capability
•
•
•
Optical Digital Output
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1. This unit is a sophisticated compact disc player. To ensure proper
operation for the best possible performance, please read this
manual carefully.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture.
2. Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also avoid
locations subject to vibration and excessive dust, heat, cold or
moisture. Keep it away from sources of hum such as transformers
or motors.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
DANGER
3. Do not place another component on top of this unit, because to do
Invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
so will discolor or damage the surface of the unit.
4. Do not open the cabinet of this unit, because to do so might result
in damage to the unit, or injury by electric shock. If any foreign
object or substance enters the unit, contact your dealer for
assistance.
CAUTION
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
5. To prevent damage by lightning, disconnect the power cord from
the household AC outlet during an electrical storm.
This compact disc player is classified
as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT
label is located on the rear exterior.
(Europe and U.K. models only)
6. When disconnecting the power cord from the household AC outlet,
grasp the plug; do not pull the cord.
CLASS 1 LASER PRODUCT
7. Do not apply excessive force when using switches and controls.
8. When moving the unit, be sure to first disconnect the power cord
from the household AC outlet, and disconnect cords connected to
other equipment.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
9. Do not attempt to clean the unit with chemical solvent as this
might damage the finish. Use a clean, dry cloth.
10. Be sure to read the “TROUBLESHOOTING” section for advice on
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
common operating errors before concluding that your unit is faulty.
11. Keep this manual in a safe place for future reference.
FOR CANADIAN CUSTOMER
12. Voltage selector (General model only)
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING
EQUIPMENT REGULATIONS.
The voltage selector (on the rear panel of this unit) must be
correctly set to the voltage used locally before making any
connection to the AC power supply.
IMPORTANT
Please record the serial number of this unit in the space below.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. (standby mode)
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Never plug in this unit and other components until all connections are completed.
Connections should be made to the correct input terminals of
the amplifier or other component.
If the placement of this unit causes noise to other equipment,
such as a tuner, separate them from each other.
•
•
U.S.A. model
1
LINE OUT
DIGITAL OUT
OPTICAL
1
Connection cord
(included)
To AC outlet
Amplifier or receiver
1
CD
U.S.A. model
2
LINE OUT
DIGITAL OUT
OPTICAL
1
Optical fiber cable
(not included)
To AC outlet
OPTICAL
Amplifier with an optical
terminal
DIGITAL IN
Choose one of the ways listed below to connect this unit to your amplifier.
When the LINE OUT (analog) terminals of this
When the DIGITAL OUT (OPTICAL) terminal of
unit are used ( 1 )
this unit is used ( 2 )
Be sure that the left (“L”) and right (“R”) LINE OUT terminals
Before using this terminal, remove the terminal’s cover by
•
•
are connected to the corresponding (left and right) terminals
of the amplifier or other component.
pulling it.
Make the connection from this terminal to the optical input
terminal of an amplifier by using a commercially available
optical fiber cable.
•
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
•
terminals of the amplifier. If the amplifier does not have such
terminals, use the “TAPE PB” terminals. For additional
details concerning these connections, refer to the operation
instructions for the amplifier being used.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
Be sure to attach the terminal’s cover when this terminal is
not being used, in order to protect the terminal from dust.
•
• The LINE OUT terminals of this unit are numbered 1. When
connecting this unit with a YAMAHA amplifier or receiver
whose terminals on the rear panel are numbered as 1, 2,
3, etc., connect the LINE OUT terminals of this unit to the
input terminals numbered 1 on the rear of the amplifier or
receiver.
This terminal can also be connected to the optical input
terminal of a digital audio tape deck (DAT), MD recorder, etc.
to record CD onto tape or MD directly.
•
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IDENTIFICATION OF COMPONENTS
* ( ) indicates the page number on which the control part is best described.
FRONT PANEL
* The SKIP/SEARCH buttons on the main unit have both the
functions of the SKIP button and the SEARCH button on the
remote control transmitter.
* The PLAY/PAUSE button on the main unit has both the
functions of the PLAY button and the PAUSE button on the
remote control transmitter.
Disc tray (p. 7)
Display panel
NATURAL SOUND COMPACT DISC PLAYER CDX-9
PLAY/
STANDBY/ON
PAUSE
STOP
OPEN/CLOSE button (p. 7)
SKIP/SEARCH buttons (p. 8, 9)
STOP button (p. 8)
PLAY/PAUSE button (p. 7, 8)
Remote control sensor (p. 19)
STANDBY/ON switch (p. 7)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
* ( ) indicates the page number on which the control part is best described.
REMOTE CONTROL TRANSMITTER
DIMMER button (p. 10)
TIME button (p. 10)
TAPE button (p. 14)
SYNCHRO button (p. 18)
PEAK button (p. 17)
OPEN/CLOSE button (p. 7)
CLEAR button (p. 13)
OPEN/
CLOSE
SYNCHRO
DIMMER
TAPE
TIME
SPACE
PEAK
CLEAR
PROG
SPACE button (p. 9)
PROG button (p. 12)
INDEX button (p. 13)
1
2
5
8
3
6
9
INDEX
4
7
+I0
0
Numeric buttons (p. 8)
REPEAT
RANDOM
REPEAT button (p. 11)
STOP button (p. 8)
RANDOM button (p. 11)
SEARCH button (p. 9)
SEARCH
SKIP
SKIP button (p. 8)
PLAY button (p. 7)
STOP
PAUSE
PLAY
PAUSE button (p. 8)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
This manual describes how to operate this unit by using the remote control transmitter.
To operate this unit on the front panel, use the corresponding buttons on the front panel.
BASIC OPERATION
OPEN/
CLOSE
SYNCHRO
DIMMER
TAPE
TIME
2, 3
4
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
INDEX
4
+I0
0
7
STANDBY/ON
REPEAT
RANDOM
SEARCH
1
SKIP
STOP
PAUSE
PLAY
1
2
Turn the power on.
3
Close the disc tray.
STANDBY/ON
OPEN/
CLOSE
Load a disc.
Label side
upward
4
PLAY
OPEN/
CLOSE
Disc tray
Play will begin from the first track of the disc.
Display information at disc play
Notes
After closing the disc tray by pressing the OPEN/CLOSE
button, the display shows the total number of tracks and the
total recorded time of the disc for a few seconds.
•
1
2
TOTAL
Additionally, you can close the disc tray by pressing the
PLAY (PLAY/PAUSE) button, a numeric button or the
RANDOM button, or by pressing the front edge of the disc
tray gently. If the tray is closed in these ways, play will begin
automatically, however, the display will not show the total
number of tracks and the total recorded time of the disc.
•
1
2
Shows the track number selected or being played.
Shows the time displays. (Refer to “Selecting time
displays” on page 10.)
When you finish using this unit
Standby mode
Press the STANDBY/ON switch again to turn this unit into the
In this state, this unit is not disconnected from the source
as long as it is connected to the wall outlet, even if this unit
itself is turned off.
standby mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop play temporarily
To stop play completely
PAUSE
STOP
To resume play, press the PAUSE button again (or press the
PLAY button).
* The PLAY/PAUSE button on the front panel can also be
used to stop play temporarily or to resume play.
To play a desired track on the disc
DIRECT PLAY
Select a desired track using the numeric button.
SKIP PLAY
To play from the beginning of the track following the one now
playing
5
SKIP
To play from the beginning of the track now playing
SKIP
The selected track
number is displayed
Example: To select track 25
Press 1 twice, then immediately press 2 once.
To play from the beginning of the track before the one now
playing
SKIP
+I0
5
➁
(twice)
➀
These operations can also be performed when the unit is in
the pause or stop mode.
•
*
If a track number higher than the highest track number on
the disc is selected, the last track on the disc will be
played.
When using the SKIP button on the remote control
transmitter:
•
If the button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
When using the SKIP/SEARCH buttons on the front panel:
Be careful not to press and hold a button, otherwise the
selected track is played forward (or backward) rapidly.
Caution
When the disc tray is open, do not touch the inside gear
wheel. If you touch the gear wheel, your finger may be
caught in the closing tray and injured.
NATURAL SOUND COMPACT DISC PLAYER
STAND
Gear wheel
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To advance or reverse play rapidly (MANUAL SEARCH)
To advance rapidly
The sound can be heard (although slightly garbled) during
•
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
contents quickly.
Manual search can also be performed while disc play is
paused, though no sound will be heard.
When using the SKIP/SEARCH buttons on the front panel:
Be careful not to release a button just after it is pressed,
otherwise the play is skipped to the beginning of the next
track or returned to the beginning of the current track.
•
•
SEARCH
(Press and hold.)
To reverse rapidly
SEARCH
(Press and hold.)
Automatic spacing
If you record a disc onto tape with an insufficient time space
between tracks, the tape deck will not be able to perform blank
search operations on the tape correctly. Such a search mistake
of the deck can be prevented by pressing the auto-SPACE
button to insert spaces of about 4 seconds between the tracks
before recording.
Note
When the automatic spacing function is in effect, the display of
the total time and of the total remaining time will include each
of the 4 second non-recorded intervals placed between tracks.
To cancel the automatic spacing function
SPACE
SPACE
“SPACE” goes off
from the display.
SPACE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting time displays
You can select any of the four time displays by pressing the TIME display mode-select button.
Elapsed time of the track now playing
Total remaining time on the disc
➀
➃
TOTAL
REMAIN
TIME
Remaining time of the track now playing
➁
Total disc play time
➂
TOTAL
REMAIN
Note
The remaining time
is 25 or higher.
will not be displayed if the track number
➁
Changing brightness of the display
Normal illumination
Slightly dim
If desired, you can change brightness of the display
in three degrees by pressing the DIMMER button.
DIMMER
Dim
10
Download from Www.Somanuals.com. All Manuals Search And Download.
RANDOM-SEQUENCE PLAY
You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer.
Notes
To perform random-sequence play
This feature will not function during programming, or during
•
programmed play.
If the SKIP
button is pressed during random-sequence
•
RANDOM
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the track now being played.
This indication appears while the unit is mixing
up tracks.
•
•
Total remaining time on the disc will not be displayed during
random-sequence play.
To cancel random-sequence play
STOP
RANDOM
or
REPEAT PLAY
You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change
whenever you press the REPEAT button.
SINGLE REPEAT
A single track is repeatedly played.
* This is also available in the programmed-play mode and the
random-sequence play mode.
(OFF)
(If the repeat play mode is switched off, the programmed-
play mode or the random-sequence play mode will be
resumed.
REPEAT
SINGLE
REPEAT
FULL REPEAT
All tracks (the entire disc) are played repeatedly.
* In the programmed-play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
FULL
REPEAT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM PLAY
You can enjoy listening to your favorite tracks in any desired order by programming tracks. As many as 25 tracks can be
programmed in sequence.
OPEN/
SYNCHRO
DIMMER
TAPE
TIME
CLOSE
PROG
SPACE
1
PEAK
CLEAR
2
5
8
3
6
9
INDEX
2
4
4
7
+I0
0
3
1
REPEAT
RANDOM
SEARCH
SKIP
STOP
PAUSE
PLAY
1
2
Stop the unit.
3
Program a desired track by pressing the corresponding
numeric button.
STOP
6
* Repeat this operation to program more tracks. You can
select the same track again.
PLAY
PROG
4
PROGRAM
TOTAL
Flashes.
Notes
Display information during programming
In step 2, if “P-01” does not appear in the display, press the
•
TIME display mode-select button.
If, during programming, the TIME display mode-select button
•
is pressed, the program number display can be changed to
display the total time of the programmed tracks. To return to
the previous display, press the TIME display mode-select
button once again.
PROGRAM
TOTAL
The SKIP (
and
playing, but only within the range of the programmed tracks.
The SEARCH ( and ) button can be used during
) button can be used during
•
•
•
1
playing to search all tracks, including unprogrammed tracks.
The PAUSE mode can also be programmed (one time only),
if so desired, by pressing the TAPE button instead of a
2
3
numeric button. (In this case, “
display.)
B” is illuminated on the
PROGRAM
TOTAL
If, for a compact disc with 25 tracks or more, track number
25 or higher is programmed, the total time will disappear
from the display.
•
1
Shows the program number for the track to be
programmed next.
2
3
Shows the selected track number.
Shows the total time of the tracks currently programmed.
* If the total time becomes 100 minutes or more, the highest
position of a figure will not be displayed.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop program play
To check program data
Press the STOP button. The first programmed track number
will be displayed.
To resume play, press the PLAY button. Play will begin from
the beginning of the program.
1. If during program play, press the STOP button.
2. Press the PROG button.
3. Each time the SKIP
button is pressed, the track
numbers and sequential order of the programmed tracks
can be checked one after another. The display of the track
number can be returned (sequentially in reverse order) by
To cancel a program sequence
pressing the SKIP
button.
There are several methods, as described below.
Press the STOP button or the CLEAR button while the unit is
stopped.
To correct program data
•
Open the disc tray.
Turn this unit into the standby mode.
1. Follow the procedure described in “To check program
data”.
2. Display the track number to be corrected by pressing the
SKIP button.
•
•
3. Press a numeric button to select a track to replace the one
displayed. The previously programmed track will be
cleared from the memory and the new one will be
programmed.
4. After the correction has been completed, once again press
the PROG button or the PLAY button.
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
OPEN/
SYNCHRO
DIMMER
TAPE
TIME
CLOSE
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
INDEX
4
7
+I0
0
2
1, 3
REPEAT
RANDOM
SEARCH
SKIP
STOP
PAUSE
PLAY
To cancel the index search function
Press the INDEX button.
1
Select a track which has index numbers.
Notes
5
Not all discs have index numbers. The index system is a
•
method for sub-dividing tracks into smaller divisions (such
as, for example, the movements within classical symphonies)
for easier location of those parts. The liner notes with the
disc usually tell if such index numbers are included.
If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
For some discs, play may begin slightly prior to the actual
designated index point.
If the disc has no encoded index points, play will begin from
the start of the selected track.
The index number can be designated only while the INDEX
number display is illuminated.
•
2
3
INDEX
INDEX
•
•
•
Select the desired index number.
6
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TRACK PROGRAMMING FOR RECORDING TO TAPE
This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible
recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least
amount of unrecorded space remaining at each end of the tape.
Automatic tape-programming
Ⅲ
4
If you desire, you can also enter the tape’s total
possible recording time manually after you select a
preset tape length in step 3.
The unit will automatically program tracks on a disc with the
original order of tracks unchanged.
Example: For a C-64 tape (32 minutes on each side)
4
6
3
+
OPEN/
SYNCHRO
DIMMER
TAPE
TIME
CLOSE
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
2
INDEX
4
7
+I0
0
Press the REPEAT button.
5
4
7
6, 7
REPEAT
RANDOM
REPEAT
5
1
SEARCH
SKIP
STOP
PAUSE
PLAY
The unit automatically programs tracks for side A and side
B separately considering the tape’s total time.
* The display shows momentarily the programmed track
numbers, the total number of programmed tracks and the
total time of programmed tracks for side A and B
respectively.
Stop the unit.
1
STOP
6
Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
* The peak level searching function of this unit is useful for
adjusting recording level on the tape deck. (Refer to
page 17.)
7
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at the
same time, press the PLAY or PAUSE button on this unit.
2
If you desire, you can automatically insert additional
time space between tracks. (Refer to page 9.)
Notes
• All tracks may not be programmed if the tape’s length is not
enough. To program all tracks, use a longer tape.
• CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 6 and 7, press the
SYNCHRO button and then press the PLAY button on this
unit’s remote control transmitter. Recording automatically
begins. (For details, refer to page 18.)
SPACE
SPACE
Display information (at step 5)
3
Enter the tape’s total possible recording time.
1
2
TAPE
PROGRAM
A
TOTAL
3
1
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
You can select any of four preset tape lengths by
pressing the TAPE button.
2
3
Shows the total time of programmed tracks for each side.
Shows the side of the tape.
TAPE
(off)
Note on tape programming
To check, cancel or correct program data, refer to page 13.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual tape-programming
This is for recording desired tracks in any desired
order onto a tape.
Ⅲ
4
7
OPEN/
CLOSE
SYNCHRO
DIMMER
TAPE
TIME
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
INDEX
2
4
7
+I0
0
3, 5
REPEAT
RANDOM
SEARCH
SKIP
STOP
PAUSE
PLAY
6, 7
1
2
Follow steps 1 – 4 on page 14.
5
Select the track numbers (to be recorded on side B) in
any desired order.
1
4
7
2
5
8
3
6
9
+I0
0
PROG
PROGRAM
A
TOTAL
REMAIN
6
7
Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
3
4
Program desired tracks (to be recorded on side A) in
any desired order.
1
4
7
2
5
8
3
6
9
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and,
at the same time, press the PLAY or PAUSE button on
this unit.
+I0
0
Notes
• If, in step 3 or 5, “E rr” appears on the display, the track
number just selected cannot be programmed because there
is not enough time remaining on the tape.
• In step 3 or 5, each time a selection is made, the track
number and the tape’s remaining time will be displayed, and
then the display will change to indicate the next program
number.
When track selection for side A is finished, press the
TAPE button.
• CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 6 and 7, press the
SYNCHRO button and then press the PLAY button on this
unit’s remote control transmitter. Recording automatically
begins. (For details, refer to page 18.)
TAPE
A pause mode is programmed.
Notes on tape programming
To check, cancel or correct program data, refer to page 13.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
Up to a maximum of 25 tracks can be programmed. If,
however, the PAUSE mode is inserted, it is counted as one
track.
• This function can be used to program up to track number 24.
If the disc has more than 24 tracks, track number 25 and
thereafter will not be programmed.
•
•
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Random sequential tape-programming
The unit will automatically program tracks in random sequential order for recording to tape.
Ⅲ
OPEN/
SYNCHRO
DIMMER
TAPE
TIME
CLOSE
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
INDEX
4
7
+I0
0
REPEAT
RANDOM
2
SEARCH
SKIP
4
STOP
PAUSE
PLAY
3, 4
Notes
Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining at
the end of the tape also changes accordingly.
If the tape’s length is not enough, all tracks cannot be
programmed. In this case, exchange the tape for a longer
one.
•
1
2
Follow steps 1 – 4 on page 14.
•
RANDOM
• CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 3 and 4, press the
SYNCHRO button and then press the PLAY button on this
unit’s remote control transmitter. Recording automatically
begins. (For details, refer to page 18.)
The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
* The display shows momentarily the programmed track
numbers, the total number of programmed tracks and the
total time of programmed tracks for side A and B
respectively.
Display information (at step 2)
1
2
PROGRAM
A
3
Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
TOTAL
3
4
The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or PAUSE button on
this unit.
1
Shows the number of programmed tracks for each side in
turn just after the automatic programming is finished, and
then it is replaced by the number of the first programmed
track for side A.
2
3
Shows the total time of programmed tracks for each side.
Shows the side of the tape.
Note on tape programming
To check, cancel or correct program data, refer to page 13.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic searching for the peak level on a disc
This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly.
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.
OPEN/
SYNCHRO
DIMMER
TAPE
TIME
CLOSE
2
1
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
INDEX
4
7
+I0
0
REPEAT
RANDOM
SEARCH
SKIP
STOP
PAUSE
PLAY
To cancel this function
Press the STOP button. (Some other buttons can also be used
to cancel this function.)
1
2
Stop the unit.
STOP
Notes
Even if the peak level search is performed twice or more on
•
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
In the program play mode, this feature will function among
•
the programmed tracks only. If program play is being
performed, first press the STOP button, and then press the
PEAK button. If program play is not being performed, only
press the PEAK button.
PEAK
PEAK
The peak level search is performed on the disc.
PEAK
REPEAT
PEAK
REPEAT
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this sound.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CD SYNCHRONIZED RECORDING
This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on
tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote
control transmitter at the same time.
OPEN/
SYNCHRO
DIMMER
TAPE
TIME
CLOSE
1
3
4
SPACE
1
PEAK
CLEAR
PROG
2
5
8
3
6
9
INDEX
4
7
+I0
0
REPEAT
RANDOM
SEARCH
4
5
SKIP
STOP
PAUSE
PLAY
1
Load the disc.
4
If necessary, select a desired track.
OPEN/
CLOSE
5
SKIP
or
5
2
3
Load a tape on the tape deck.
PLAY
*
The peak level search function of this unit is useful
for adjusting recording level on the tape deck. (Refer
to page 17.)
Both CD play and tape deck recording begin.
* CD play begins a little later than recording.
SYNCHRO
6
If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3–5 again.
To cancel this function
Press the STOP button.
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
Notes
* In this mode, the time display on this unit flashes on and
off.
To finish or stop the recording, make proper operations on
•
the tape deck.
Programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 12–13 for the programming procedure.)
•
This function can also be used together with the automatic
tape-programming function. (Refer to page 14–16.)
•
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
Remote control transmitter operation range
2
Remote control
sensor
1
3
Within approximately
6m (19.7 feet)
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit, the batteries are weak. Replace both
batteries with new ones.
Notes
Use only AA, R6, UM-3 batteries for replacement.
Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
•
•
Notes
Remove the batteries if the remote control transmitter will not
be used for an extended period of time.
There should be no large obstacles between the remote
control transmitter and the main unit.
•
•
If batteries leak, dispose of them immediately. Avoid
If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
•
•
touching the leaked material or letting it come in contact with
clothing, etc. Clean the battery compartment thoroughly
before installing new batteries.
NOTES ABOUT HANDLING COMPACT DISCS
This compact disc player is designed only for playing
Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not wipe
with a circular motion; wipe straight outward from the center.
•
•
•
compact discs bearing the
mark. Never attempt to load
any other type of disc into the unit.
The unit will also play 8-cm (3-inch) compact discs.
To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully.
Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances might
irreparably damage the disc’s surface.
•
•
Always handle the disc with care so that its surface is not
scratched.
•
•
Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
No!
Compact discs are not subjected to wear during play, but
damage to the disc surface when the disc is being handled
can adversely affect the disc’s play.
To play a 8-cm (3-inch) CD
Place it in the inner recessed area of the disc tray. Do not put
a normal (12-cm/5-inch) CD on top of a 8-cm CD.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
SYMPTOM
PROBABLE CAUSE
REMEDY
The player does not switch ON when the
STANDBY/ON switch is pressed.
The power cord is not connected or not
completely connected.
Securely connect the power cord.
It happens that this unit does not work
normally.
There is an influence of strong external noise
(lightning, excessive static electricity, etc.) or a
misoperation on this unit while using this unit.
Turn this unit into the standby mode and
disconnect the AC power cord from the AC
outlet. After about 30 seconds have passed,
connect the power and operate this unit again.
The disc tray does not close completely.
Play does not begin.
A foreign object is obstructing the tray.
The disc is damaged.
Carefully check the disc tray and remove the
foreign object.
Check the disc carefully; replace it if
necessary.
There is moisture on the laser pickup.
Wait 20 to 30 minutes after switching the unit
ON before trying to play a disc.
The disc has been loaded upside down.
The disc is dirty.
Reload the disc with the label side up.
Clean the disc.
Play is delayed, or begins at the wrong
place.
The disc may be scratched or damaged.
Check the disc carefully; replace it if
necessary.
No sound.
Improper output cable connections.
Improper amplifier operation.
Connect the cables properly. If the problem
persists, the cables may be defective.
Set the amplifier controls to the correct input
selection.
Sound “skips”.
Sound “hums”.
The player is being subjected to vibrations or
impacts.
Relocate the player.
The disc is dirty.
Clean the disc.
Improper cable connections.
Securely connect the audio cables. If the
problem persists, the cables may be defective.
Noise from a nearby tuner.
The tuner is too close to the player.
The disc may be warped.
Move the tuner and player farther apart.
Replace the disc.
Noise from inside of the disc tray.
The remote control transmitter does not
work.
The batteries of this remote control transmitter
are too weak.
Replace the batteries with new ones.
Direct sunlight or lighting (of an inverter type of Change position of the main unit.
fluorescent lamp etc.) is striking the remote
control sensor of the main unit.
SPECIFICATIONS
AUDIO SECTION
GENERAL
Frequency response ....................... 2 Hz
מ 20 kHz, ע 0.3 dB Harmonic distortion + noise (1 kHz) ....................... 0.0022%
S/N ratio ........................................................................ 118 dB
Dynamic range ............................................................... 98 dB
Wow & flutter ................................................... Unmeasurable
Output voltage ......................................................... 2.0
ע 0.5V Power requirements
U.S.A. model .................................................. 120V, 60 Hz
Europe and U.K. models ................................230V, 50 Hz
General model ..................... 110/120/220/240V, 50/60 Hz
Power consumption ........................................................ 15W
Dimensions (W x H x D) ........................ 280 x 82.5 x 354 mm
(11” x 3-1/4” x 13-15/16”)
Weight ....................................................... 3.8 kg (8 lbs. 6 oz.)
Accessories ................................................... Connection cord
Remote control transmitter
Batteries (size AA, R6, UM-3)
Please note that all specifications are subject to change
without notice.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
STORINGZOEKEN
Controleer de volgende punten, indien het apparaat niet normaal functioneert en bepaal of het probleem verholpen kan worden door
de eenvoudige hieronder gesuggereerde maatregelen te nemen. Kan het probleem niet worden verholpen, of staat het probleem
niet vermeld in de STORINGSINDICATIE kolom, het netsnoer van het apparaat uit het stopcontact verwijderen en voor verdere hulp
contact opnemen met uw dealer of een reparatiedienst.
STORINGSINDICATIE
MOGELIJKE OORZAAK
OPLOSSING
Sluit het netsnoer goed aan.
De speler wordt niet ingeschakeld wanneer de
STANDBY/ON schakelaar wordt ingedrukt.
Het netsnoer is niet aangesloten of niet volledig
aangesloten.
Het doet zich voor dat dit apparaat niet normaal
functioneert.
Er is een invloed van een krachtige storing van
buitenaf (bliksem, buitengewoon veel statische
elektriciteit, enz.) of een verkeerde bediening van dit
apparaat.
Schakel dit apparaat in de standby functie en
verwijder de stekker van het netsnoer uit het
stopcontact. Na ongeveer 30 seconden de stekker
weer in het stopcontact steken, dit apparaat weer
inschakelen en opnieuw proberen te bedienen.
De disc-lade sluit niet volledig.
De weergave begint niet.
De disc-lade wordt door een vreemd voorwerp
gehinderd.
Controleer voorzichtig de disc-lade en verwijder het
vreemde voorwerp.
De disc is beschadigd.
Controleer de disc nauwkeurig; vernieuw deze indien
nodig.
Er bevindt zich vocht op de laser pick-up.
De disc is ondersteboven in de lade geplaatst.
Wacht 20 tot 30 minuten na het inschakelen van het
apparaat, alvorens te proberen een disc af te spelen.
Laad de disc opnieuw met het label naar boven
gericht.
De disc is verontreinigd.
Reinig de disc.
De weergave begint vertraagd of begint op het
verkeerde punt.
De disc is vermoedelijk bekrast of beschadigd.
Controleer de disc nauwkeurig; vernieuw deze indien
nodig.
Geen geluid.
Verkeerde aansluiting van de uitgangssignaalkabels.
Verkeerde bediening van de versterker.
Sluit de kabels op de juiste wijze aan. Indien het
probleem blijft voortbestaan, zijn de kabels
vermoedelijk defect.
Stel de regelaars van de versterker in op de juiste
ingangssignaalkeuze.
Het geluid “springt over”.
Het geluid “bromt”.
De speler is onderhevig aan trillingen of schokken.
De disc is verontreinigd.
Stel de speler op een andere plaats op.
Reinig de disc.
Verkeerde aansluiting van de kabels.
Maak de audiokabels goed vast. Indien het probleem
blijft voortbestaan, zijn de kabels vermoedelijk defect.
Storing van een in de buurt opgestelde tuner.
Storing van binnenuit de disc-lade.
De tuner bevindt zich te dicht bij de speler.
De disc is vermoedelijk kromgetrokken.
Plaats de tuner en de speler verder uit elkaar.
Vernieuw de disc.
De zender van de afstandbediening werkt niet.
De batterijen van deze afstandbediening zijn te zwak.
Vervang de batterijen door nieuwe.
Verander de opstelling van de hoofdeenheid.
Direct zonlicht of verlichting (van een sterke
fluorescerende lamp, enz.,) valt op de sensor van de
afstandbediening van de hoofdeenheid.
SPECIFICATIES
AUDIO GEDEELTE
ALGEMEEN
Spanningsvereisten
Frekwentiebereik ............................ 2 Hz
מ 20 kHz, ע 0,3 dB Modellen voor U.S.A. ...................................... 120V, 60 Hz
Modellen voor Europa en Groot-Brittannië
...........................................................................230V, 50 Hz
Algemeen model ................... 110/120/220/240V, 50/60 Hz
Harmonische vervorming + ruis (1 kHz) ............... 0,0022%
Signaal/ruisverhouding ............................................... 118 dB
Dynamisch bereik .......................................................... 98 dB
Wow & flutter ....................................................... Onmeetbaar
Uitgangsspanning ................................................... 2,0
ע 0,5V Stroomverbruik................................................................. 15W
Afmetingen (L x H x B) .......................... 280 × 82,5 × 354 mm
Gewicht .......................................................................... 3,8 kg
Toebehoren ....................................................... Aansluitkabel,
afstandbediening,
batterijen (format AA, R6, UM-3)
Alle specificaties zijn onder voorbehoud en kunnen zondere
nadere kennisgeving worden gewijzigd.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B.
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VZ21440
Download from Www.Somanuals.com. All Manuals Search And Download.
|