XM RADIO OVERVIEW
SR9600 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM
Connect-and-PlayTM (sold separately) and subscribing the XM service.
Introducing XM Satellite Radio
There’s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio. Select from over 150
channels of music, news, sports, comedy, talk, and entertainment. Coast-to-coast coverage. Digital
quality sound. With all music channels 100% commercial free.
Model SR9600A (XM Satellite Radio) User Guide
ENGLISH
How to Subscribe
Thank you for purchasing a SR9600A XM Satellite Radio.
SR9600A is designed to add XM Satellite Radio functions to SR9600.
This user guide is exclusive for XM Satellite Radio functions.
For instructions other than XM Satellite Radio functions, please refer to the enclosed “Model SR9600 User
Guide”.
at (800) 967-2346. Customers should have their Radio ID and credit card ready. The Radio ID can be
found by selecting channel 0 on the radio.
(See the “CHECKING THE XM SIGNAL STRENGTH AND RADIO ID”)
A Warning Against Reverse Engineering
It is prohibited to copy, decompile, disassemble, reverse engineer, or manipulate any technology
incorporated in receivers compatible with the XM Satellite Radio system.
Furthermore, the AMBE® voice compression software included in this product is protected by intellectual
property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The
user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy,
decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code
into human-readable form. The software is licensed solely for use within this product.
XM Satellite Radio Ready
Hardware and required basic monthly subscription sold separately. Premium Channel available at
additional monthly cost. Installation costs and other fees and taxes, including a one-time activation
fee may apply. Subscription fee is consumer only.
All fees and programming subject to change. Subscriptions subject to Customer Agreement available
at xmradio.com.
Only available in the 48 contiguous United States. ©2005 XM Satellite Radio Inc. All rights reserved.
All other trademarks are the property of their respective owners.
The XM name and related logos are registered
trademarks of XM Satellite Radio Inc.
CONNECTING THE XM CONNECT-AND-PLAY ANTENNA
• Plug the XM Connect-and-Play antenna into XM terminal on the rear panel.
• Position the XM Connect-and-Play antenna near a south-facing window to receive the best signal.
When making connections, also refer to the operating instructions of the XM Connect-and-Play
antenna.
CONTENTS
XM RADIO OVERVIEW ....................................................................................................................................................... 1
CONNECTING THE XM CONNECT AND PLAY ANTENNA ............................................................................................... 1
LISTENING TO XM SATELLITE RADIO ............................................................................................................................ 3
SEARCH MODE .................................................................................................................................................................. 4
PRESET MEMORY ............................................................................................................................................................. 5
TROUBLESHOOTING......................................................................................................................................................... 6
XM
7.1CH IN
SL SBL
MAIN IN
SR SBL
MULTI OUT
A
L
C
L
R
SL
SBR
C
B
DIGITAL
IN
L
(AUDIO)
S400
B
CENTER
1
2
3
4
5
6
7
8
R
SPEAKER
ON
OFF
C
R
SR
SBR
SW
PRE OUT
SW
AUDIO
SURR.BACK
/MULTI SPK.
(AUX 2)
/SPK.
C
LEFT
L
AUDIO
S400
R
SURR.BACK
/MULTI SPK.
/SPK.
C
IN TAPE OUT
IN CD-R/MD OUT
CD
RIGHT
DVD
LD
TV
DSS
VCR-1
OUT
VCR-2/DVD-R MONITOR OUT
IN OUT
TUNER-1
GND
IN
1
2
AM
FM(75Ω)
NT
RIGHT
VIDEO
MULTI OUT
A
B
S-VIDEO
SURR.
LEFT
VIDEO
XM
INPUT-1
(DVD)
INPUT-2
(DSS)
OUTPUT
C
B
C
R
Y
/
/
PB
PR
HDMI
Ver 1.1
OUTPUT-1
SURR.
RIGHT
INPUT-1(DVD)
INPUT-2 (DSS)
INPUT-3 (VCR-1)
INPUT-4 (VCR-2 DVD-R)
/
CHED 1A 120W MAX
SPEAKER SYSTEMS
FRONT
SURR BACK
FRONT AND
A
OR B, CENTER, SURR,
:
:
MINIMUM
MINIMUM
6
8
OHMS
OHMS
COMPONENT
VIDEO
A
B
C
B
CR
C
B
C
R
C
B
C
R
C
B
CR
/
Y
/
/
Y
/
/
Y
/
/
Y
/
OPT
COAX
P
B
P
R
P
B
PR
PB
PR
P
B
PR
OUTPUT-2
SWITCHED 1A 120W MAX
1
2
3
4
1
2
3
4
IN
MODEL NO. SR9600
IR
FLASHER RECEIVER
IN IN
AC IN
OUT
RC-5 MULTI RC
DIGITAL
OUT
AC 120V 60HZ
AC OUTLETS
RS232C
DC OUT
EMITTER OUT
Note
• Keep the power supply cord unplugged until the XM Connect-and-Play antenna connection have been
completed.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SIGNAL : STRONG
Signal strength is good
SIGNAL : MARGINAL
Signal strength is marginal
When the Surround mode is displayed:
SWITCHING XM INFORMATION IN THE FRONT
PANEL DISPLAY
LISTENING TO XM SATELLITE RADIO
SELECTING AN INPUT SOURCE
Before you can listen to XM Satellite Radio, you
must first select the input source on the SR9600.
You can display XM information (such as artist
name, song title, category or signal status) for the
channel currently selected in the front panel
display.
wed Jun 01
1/2 XM
XM : Main
4:40pm
1.
wed Jun 01
1/8 A/V Amp
Source Select
4:40pm
The video monitor output will show OSD information.
AV SURROUND RECEIVER SR9600
SIGNAL : WEAK
Signal strength is poor
SIGNAL : NON
Loss of the signal
INPUT SELECTOR
X M I N F O R M A T I O N
PURE DIRECT
THX
X M
: 0 4 0
SURROUND
MODE
AUTO
MULTI
C H A N
N A M E
T I T L E : M o n e y
C A T : R o c k
: D e e p T r a c k s
: P i n k F l o i d
7.1
PURE DIRECT
THX
STANDBY
POWER ON/STANDBY
PHONES
1.
1.
S I G N A L : S T R O N G
2. Adjust the antenna location until Signal
strength is good.
1. Tap the Disp. button on the remote control
unit repeatedly to toggle between the
following channel information display modes.
1. Select “XM” by turning the INPUT SELECTOR
knob on the front panel.
3. Turn the GYRO TUNING dial or tap the channel
or
button on the remote control unit to
Or, tap the “XM” on the remote control unit.
Note:
select channel 0 (XM000).
• The Radio ID is displayed.
•
The front panel display can indicate up to 20
alphanumeric characters at once. If the information
contains more than 20 characters, the information
scrolls from right to left.
Artist name/Song title
Channel category
CHECKING THE XM SIGNAL STRENGTH AND
RADIO ID
• If the information contains a character that cannot
be recognized by that unit, the character will be
displayed with “ ” (space).
Signal Status
wed Jun 01
1/2 XM
XM : Main
4:40pm
Radio ID
Note:
Surround mode (OSD ON)
• If “CHECK ANTENNA” appears in the front
panel display, the XM Connect-and-Play antenna
may not be connected to the XM terminal on the
rear panel of this unit properly.
When the channel Artist name/Song title is
displayed:
1.
When the channel category is displayed:
When the signal status is displayed:
1. Tap the Disp. twice on the remote control
unit. Signal status is displayed.
DIGITAL
• The display changes as shown below
according to the receiving condition.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
(Using the SR9600
,
cursor button)
CHANNEL DIRECT CALL
SEARCH MODE
Note:
• “LOADING” is displayed while receiving the
You can select the desired channel by directly
tapping the numeric keypads on the remote control
unit.
1-b. Press the or cursor button on the front
You can search for the channel you want to listen
to using one of three search modes. You can also
enter the number directly to select the desired
channel.
panel to select the desired preset station.
channel or information.
• “UPDATING” is displayed while updating
encryption code.
wed Jun 01
2/2 XM
XM : Key
4:40pm
(Using the remote control unit)
1. Tap the Preset
or
to select the desired
• When the selected channel is not available, “XM-
- - ” is displayed.
ALL CHANNEL SEARCH MODE
preset station, or input the desired preset
channel with the numeric keypad on the
remote control unit.
• “OFF AIR” is displayed while air is suspended
(e.g. midnight).
wed Jun 01
1/2 XM
XM : Main
4:40pm
1.
2.
1.
CATEGORY SEARCH MODE
You can select the desired channel from the
category allocated to each channel.
1.
DOWN
THX
DOWN
TUNING
UP
BAND
F/P
D
MULTI
SPEAKER
AUTO
MULTI
AUTO TUNE
T-MODE
MEMORY
CLEAR
Category being aired can be only selected.
7.1CH INPUT
DISPLAY
SPEAKERS
A/B
CT
THX
MRAC
ENTER
MENU
EXIT
wed Jun 01
1/2 XM
XM : Main
4:40pm
DIGITAL
MIC
2.
3.
1. Tap the Channel Direct.
3.
2.
"CH NUMBER - - -" will appear on the
display.
PURE DIRECT
THX
DOWN
TUNING
UP
BAND
(Using the SR9600)
2. Input the three digit number for your desired
Channel with the numeric keypad on the
remote control unit.
SURROUND
MODE
MULTI
SPEAKER
AUTO
MULTI
AUTO TUNE
T-MODE
MEMORY
CLE
1. Press the GYRO TUNING dial or press or
cursor button on the front panel to select the
desired station.
7.1CH INPUT
DISPLAY
1.
SPEA
A
PURE DIRECT
THX
MRAC
ENTER
MENU
EXIT
MIC
3. The desired channel will automatically be
(Using the remote control unit)
tuned.
1. Tap the Category on the remote control unit.
1. Tap the channel or
.
(Using the SR9600)
2. Turn the GYRO TUNING dial or press the or
button on the front panel to select the
desired Category.
PRESET SEARCH MODE
1-a.
1-b.
wed Jun 01
1/2
4:40pm
Note:
XM
XM : Main
• If there is no input on the keypad for 5 sec., the
input is cancelled to return to the original display.
3. After selecting the category, press the or
cursor button to select the desired station of
the category.
DOWN
1.
T
THX
DOWN
TUNING
UP
BAND
F/P
UND
E
MULTI
SPEAKER
AUTO
MULTI
AUTO TUNE
T-MODE
MEMORY
CLEAR
7.1CH INPUT
DISPLAY
(Using the remote control unit)
SPEAKERS
A/B
RECT
THX
MRAC
ENTER
MENU
EXIT
DIGITAL
MIC
2. Tap the Category or
.
3. After selecting the category, tap the Channel
or
to select the desired station of the
category.
(Using the SR9600 GYRO TUNING DIAL)
1-a. Press the F/P button to show the preset
station on the display. Select the desired
preset station by rotating the GYRO TUNING
dial on the front panel.
4. You can return to the normal mode by tapping
the Category during Category Search Mode.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE PRESET CHANNEL
The preset channel can be checked on the on
screen display.
PRESET SCAN
wed Jun 01
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
PRESET MEMORY
You can store the desired channel in the Preset
Memory.
4:40pm
1/2 XM
XM : Main
wed Jun 01
1/2 XM
XM : Main
4:40pm
wed Jun 01
2/2 XM
XM : Key
4:40pm
3.
2. 4.
wed Jun 01
2/2 XM
XM : Key
4:40pm
2. 3.
3.
VOLUME
3.
2.
PURE DIRECT
THX
DOWN
TUNING
UP
BAND
F/P
1.
3.
DOWN
SURROUND
MODE
MULTI
SPEAKER
AUTO
MULTI
AUTO TUNE
T-MODE
MEMORY
CLEAR
UP
BAND
F/P
7.1CH INPUT
DISPLAY
SPEAKERS
A/B
PURE DIRECT
THX
MRAC
1.
2.
ENTER
MENU
EXIT
AUTO TUNE
T-MODE
MEMORY
CLEAR
MIC
2.
3.
DISPLAY
SPEAKERS
A/B
MRAC
EXIT
AUX
S-VIDEO
1
INPUT
VID
DIGITAL
MIC
wed Jun 01
2/2 XM
XM : Key
4:40pm
(Using the remote control unit)
(Using the SR9600)
1. Tune into the desired channel.
1. Tap the Info. to view a list of tuner preset
1. Recall the preset number to be cleared with
the method described in “RECALLING A
PRESET CHANNEL”.
channel on the on screen display.
2. Press the MEMORY button on the front panel.
“PRESET – –“ (preset number) starts blinking
on the display.
2. If there are 10 or more preset channel, tap the
Info. again.
3.
2. Press the MEMORY button on the front panel
or tap the Memo on the remote control unit.
T U N E R P R E S E T L I S T
3. Select the preset number by rotating the
GYRO TUNING dial, while it is still blinking
(approx. 5 second)
3. The stored preset number blinks in the display
for 5 seconds. While blinking, press the
CLEAR button on the front panel or tap the
CLR on the remote control unit.
N O .
N O .
N O .
N O .
N O .
N O .
N O .
N O .
N O .
1
2
3
4
5
6
7
8
9
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
X M 0 0 1 P r e v i e w
(Using the remote control unit)
1. Tap the P-Scan on the remote control unit.
”PRESET SCAN” appears on the display and
then the preset station with the lowest preset
number is recalled first.
4. Press the MEMORY button again to enter.
The display stops blinking.
The Channel is now stored in the specified
preset memory location.
4. “xx CLEAR” appears on the display to
indicate that the specified preset number has
been cleared.
2. Preset stations are recalled in sequence (No. 1→
No. 2→ etc.) for about 5-10 seconds each. The
time changes by the received condition. No
stored preset number will be skipped.
(Using the remote control unit)
Note
1. Tune into the desired channel.
• To clear all stored preset channels, press and hold
the CLEAR and the F/P buttons for two seconds.
Note
2. Tap the Memo on the remote control unit.
“PRESET – –” (preset number) starts blinking
on the display.
• There are 50 preset channels prepared at the
factory default. The 50 channels are all set to
“CHANNEL 001”. Each channel can be stored in
the preset memory. You can search for only the
preset channels.
• The preset channel indication disappears in about
5 sec.
3. You can fast forward through the Preset
stations by tapping the Preset continuously.
When the desired preset station is received,
cancel the preset scan operation by tapping
the CLR or P-Scan.
3. Enter the desired preset number by tapping
the numeric keypads.
Note
• When entering a single digit number (2 for
example), either input “02” or just input “2”
and wait for a few seconds.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If a problem should arise, first check the following.
1. Are the connections correct?
2. Have you operated the receiver according to the operating instructions?
3. Are the speakers and other components operating properly?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
SYMPTOM
CAUSE
REMEDY
“ C H E C K A N T E N N A ” i s XM terminal and the XM Connect-and- Check that the connection are correct.
displayed.
Play antenna is not properly connected.
“NO SIGNAL” is displayed.
The signal cannot be received.
Reposition your XM Connect-and-Play antenna.
Contact XM Radio.
Receiving only XM channels 0 The XM Tuner is not activated.
and 1.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|