Model: 27LDVD05
27”
16:9 Digital LCD Television with DVD Player
Operating Manual
Manual 27LDVD05.indd a
12/07/2005 11:42:25 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1.
PreFace
1
1
2.
3.
4.
Safety Precautions
Front, Back Connections
TV Installation
2
4
4.1
4.2
4.3
4.4
4.5
4.6
Connecting Antennas
AV Video Input
S-Video Input
4
4
4
5
5
5
5
6
YCbCr Input
YPbPr Input
PC (VGA) Connection
4.7 AV Video Output
4.8 DVI Connection
5.
Setting Up Your LCD
6
5.1
5.2
Picture Setting
Audio Setting
6
6
7
7
5.3 Source Setting
5.4 TV Channel Search
6.
7.
TV / DVD Combo Remote Control
8
6.1
6.2
Remote control instructions in TV mode
Remote Control Instructions in DVD Mode
8
9
Remote Control Setup
7.1 Battery Usage Caution
Accessories
9
9
8.
9.
10
DVD Operation Instructions
10
9.1
9.2
9.3
9.4
9.5
9.6
9.7
DVD Console Operation
DVD System Setup Menu
DVD Language Setup
DVD Display Setup
DVD Audio Setup
10
11
11
11
12
13
15
DVD Lock Setup
“Others” Settings
10.
11.
Troubleshooting
16
17
Specifications
Manual 27LDVD05.indd c
12/07/2005 11:42:38 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
PREFACE
Congratulations on your purchase of a Wintal LCD! Please read this manual
thoroughly before operating the monitor. Make sure the monitor was not damaged
in transit. Should the monitor be damaged, do not install it and contact your dealer.
Check that you have all the accessories according to the model.
2.
SAFETY PRECAUTIONS
Place the Monitor on a stable surface.
Do not use the monitor with other fixations than those provided or suggested by the
manufacturer.
Do not place any material on the monitor.
Do not block or cover the ventilation openings on the monitor.
If you have a wall mount, check that it is steady.
Power source
e monitor must be plugged with a voltage source of 220/240 volts and 50 Hz.
Connection cable
Power cord and cables must be properly routed and protected to prevent people from
stepping on them and causing the monitor to fall.
Heating sources and humidity
Keep the monitor dry and away from humidity.
Keep the monitor away from heat sources
Cleaning and maintenance
Unplug the monitor before cleaning it. Do not use solvents or liquids to clean the
monitor.
Only clean the monitor with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those suggested by the
manufacturer. Using incorrect spare parts can lead to electric shocks, short-circuits
fire or other incidents.
Lightning/ Holidays
Unplug the LCD during lightning storms or when not used for long periods of time.
1 | Wintal LCD
Manual 27LDVD05.indd Sec1:1
12/07/2005 11:42:38 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
FRONT, BACK CONNECTIONS
Front View and Controls
Back View
Back Connections
DVI Input
PC Audio
R/L Input
Y
Pb Pr
Y
Cb Cr
AV Out
PC
AV1
AV2
Audio R/L Out
RF In
VGA Input
Audio R/L
Audio R/L
S-Video
CVBS Video Out
CVBS Video
Wintal LCD | 2
Manual 27LDVD05.indd Sec1:2
12/07/2005 11:42:38 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Side View
DVD Player Controls
1.
2.
3.
4.
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
: PLAY
: PAUSE
: STOP
: NEXT TRACK
5.
6.
: PREVIOUS TRACK
: EJECT
3 | Wintal LCD
Manual 27LDVD05.indd Sec1:3
12/07/2005 11:42:38 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
TV INSTALLATION
4.1 Connecting Antennas
To ensure good picture and sound,TV antenna system needs to be installed.e
antenna system as shown can be sourced from TV equipment shops, which will
provide service for correct installation and connection. After installation, insertv the
75Ω antenna plug into the antenna jack as shown.
4.2 AV Video Input
4.3 S-Video Input
Wintal LCD | 4
Manual 27LDVD05.indd Sec1:4
12/07/2005 11:42:39 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 YCbCr Input
4.5 YPbPr Input
4.6 PC (VGA) Connection
4.7 AV Video Output
5 | Wintal LCD
Manual 27LDVD05.indd Sec1:5
12/07/2005 11:42:39 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8 DVI Connection
5.
SETTING UP YOUR LCD
5.1 Picture Setting
1. Press <SYS MENU> KEY until the screen displays as below.
2. Press ► key to access image adjusting programmer. Press ▲ or ▼ key to select
Mode, Bright, Contrast, Colour and Sharpness for required adjusting option.
3. Press ◄ or ► key to adjust the setting selected.
5.2 Audio Setting
1. Press <SYS MENU> KEY until the screen displays as below.
2. Press ► key enter into audio menu press ▲ or ▼ key to select Mode, Volume,
Treble, Bass, Balance and Surround for required adjusting option.
3. Press ◄ or ► key to adjust the setting selected.
Wintal LCD | 6
Manual 27LDVD05.indd Sec1:6
12/07/2005 11:42:39 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Source Setting
Press <SYS MENU> key until the screen displays as below.
1. Press ► key to access Input Group –Blue Screen –Language—Reset menu
setting.
2. Press ▲ or ▼ key to select exact menu setting.
3. Select <Input Group> menu, press ► key to access TV-SCART-DVD-PC for
selecting input source.
*
In <SCART> menu, choose terminal-select in sub-menu SCART CVBS
or SCART RGB for input source.
4. Press ▲ or ▼ key to access OSD <Language>, select suitable language.
Press ▲ or ▼ key to access <Reset >, it will come back to original factory
setting.
*
If you have setup problems, use <Reset> menu to help you back to factory
setting.
5.4 TV Channel Search
Press <SYS MENU> key until the screen displays as below.
1. Press ► key to access Auto Tune – Manu Tune – Fine Tune – Sort – Add/skip–
Color System – Sound System menu setting.
2. Press ▲ or ▼ key to select exact menu setting.
3. Press ▲ or ▼ key to select <Manu Tune> or <Fine Tune > menu to adjust the
TV.
4. Press ▲ or ▼ key to access<Sort> to exchange channel.
5. Press ▲ or ▼ key to access <add/skip> to add or skip the channel.
*
Before tuning in the TV, choose the correct colour system and sound
system for your country. After that, choose the auto tune to start searching
the TV channel.
7 | Wintal LCD
Manual 27LDVD05.indd Sec1:7
12/07/2005 11:42:39 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
TV / DVD COMBO REMOTE CONTROL
4
2
3
1
W
SLEEP
MUTE
MODE
EJECT
PAUSE
a
b
c
8
1
4
7
2
5
8
0
3
6
9
5
STOP
6
BACK SYS MENU
7
9
-/--
CH+
PICTURE
AUDIO
10
12
ENTER
VOL -
VOL +
11
13
CH-
RESUME
SEARCH
MENU
TITLE
SETUP DISPLAY
d
h
l
g
k
o
SUBTITLE ZOOM
e
i
f
j
CLEAN BOOKMARK PBC
LANGUAGE
A-B
ANGLE
SLOW
REP
m
q
n
r
p
t
s
v
u
w
27LDVD05
6.1 Remote control instructions in TV mode
1
Power ON/OFF
2
TV/AV/DVD/PC mode
Sleep timer 30-60-90-120 off
Mute
3
4
5
Number keys
6
System setting menu key
Access to several numbers program
Back to the previous screen
Picture mode
7
8
9
10
11
12
13
Audio mode
Decrease volume control key
Channel control and menu item execute key
Increase volume control key
Wintal LCD | 8
Manual 27LDVD05.indd Sec1:8
12/07/2005 11:42:40 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Remote Control Instructions in DVD Mode
a
b
c
e
f
To eject the disc
Pause
To stop disc
Access to menu in DVD mode
Access to settings in DVD mode
Resume playback
d
g
i
Display control menu
Locating a title
j
Access to subtitles
h
k
m
n
l
Search disc chapter and time
Zoom of the picture
Set bookmark
Right/left sound track selection while playing VCD
Clear all bookmarks
o
q
r
Selecting language
Slow key
Repeat to the previous chapter
Select movie vision angle
Replaying point A to point B when selected
Fast forward key
p
s
u
t
Fast backward key
v
w
Jump to next track
Jump to previous track
7.
REMOTE CONTROL SETUP
a. Open the cover
b. Insert the supplied “AA” size batteries
When inserting the batteries, make sure correct polarities as per the “+” and “-”
marks on the batteries are correct
c. Replace the battery cover
7.1 Battery Usage Caution
To prevent battery leakage which may result in injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control
2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.)
3. Remove batteries when the remote is not used for a long time
9 | Wintal LCD
Manual 27LDVD05.indd Sec1:9
12/07/2005 11:42:40 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
8.
ACCESSORIES
Included with your Wintal LCD are the following accessories:
1. AC/DC Power Adapter
2. One Remote Control
3. 2x 1.5V “AA” batteries
4. One User Manual
5. AV Cable
9.
DVD OPERATION INSTRUCTIONS
9.1 DVD Console Operation
1. Press DISPLAY to bring up the Console Menu.
2. e Console function is only available in DVD/DVD Audio/ DVD-VR/ VCD
discs, and the display result may differ among these disc types.
DVD-VR Console
Wintal LCD | 10
Manual 27LDVD05.indd Sec1:10
12/07/2005 11:42:40 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
9.2 DVD System Setup Menu
1. Press < SETUP > key until the screen displays as photo 1.
2. Press ◄ key or ► key to select LANGUAGE -- DISPLAY - AUDIO -
LOCK - OTHERS menu setting.
9.3 DVD Language Setup
1. Press < SETUP > key until the screen displays as photo 2
2. Press ▼ key to selecting Menu Language –Disc Audio –Disc Subtitle- Disc
Menu setting.
3. Press ► key to adjust.
4. Press < Enter > to confirm the selection.
Photo 2
9.4 DVD Display Setup
1. Press < SETUP > key until the screen displays as photo 3
2. Press ▼ key to selecting TV Aspect –Display mode -TV Output Menu setting.
3. Press ► key to adjust.
4. Press < Enter > to confirm the selection.
11 | Wintal LCD
Manual 27LDVD05.indd Sec1:11
12/07/2005 11:42:40 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo 3
TV Aspect: Depending on the type of television you have, the image adjustment
offers 2 options for your setting: 4:3 and 16:9. is item is used to display image
data in the wide-screen film on the normal TV set.e option 16:9 is used when
the DVD player is connected to wide screen TV in Full Mode, and the screen will
display pictures in full size.
Display Mode item can only be modified when the TV Display mode is set to 4:3.
Two options are provided: Letterbox and Panscan.
* Letterbox: is image option will display the panoramic frame movie in the smaller
portion of the screen. And the movie might appear with black bars at the top and
bottom of the screen.
* Panscan: is image option refers to pictures where the left and right edges of the
picture are cut off so it fills the whole screen. It is selected for the normal TV set
display. is mode is selected when the picture is displayed in panoramic view and
complete scan format.
TV Output : Auto-PAL-NTSC
9.5 DVD Audio Setup
1. Press < SETUP > key until the screen displays as photo 4
2. Press ▼ key to selecting Dolby Digital – DTS-Sample Freq.-Digital Output
– DRC Menu setting.
3. Press ► key to adjust.
4. Press < Enter > to confirm the selection.
Photo 4
Wintal LCD | 12
Manual 27LDVD05.indd Sec1:12
12/07/2005 11:42:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
Dolby Digital indicates the output mode of the Dolby Digital.
Two options are provided: Bitstream and PCM
DTS indicates the output mode of the Digital Cinema.
Two options are provided: Bitstream and PCM.
a. BITSTREAM: Select this option when the unit is connected to an amplifier
with a built–in DTS decoder, Dolby Digital decoder and MPEG decoder, or
other audio equipment with digital audio output terminals.
b. PCM: Select this option when the unit is connected to the dual stereo digital
audio equipment. When the DVD disc being played is recorded with the Dolby
Digital, MPEG1/ MPEG2 recording systems, the DVD player selects PCM as
the audio output.
I. Sample Freq. item offers 2 options. If the connected receiver or amplifier is
incapable of processing digital input with sampling frequency of 96KHz, it will
select 48KHz as the sampling frequency to compress the signal to a standard
signal. After the 48KHz frequency is selected, the unit will automatically
convert the 96KHz signal into the 48KHz signal, and then your system will be
able to execute the decoding on the signals. On the other hand, if the receiver is
capable of outputting digital signals with a sampling frequency of 96KHz, it will
select 96KHz for the signal to be output as it is.
After 96KHz frequency is selected, the unit will be able to process all signals
without any further operations required.
II. Dynamic Range Compression (DRC) Provides 2 options: ON and OFF. When
the option is set as ON, the dynamic range is compressed by reducing loud
sounds and increasing soft sounds, making it easier to listen at low volume but
still enjoy clear dialogues.
Note:
Audio-digital out function is only fit for machines that have the digital out option.
9.6 DVD Lock Setup
a. Press < SETUP > key until the screen displays as photo 4
b. Press ▼ key to selecting Rating—Password—Country Code Menu setting.
c. Press ► key to adjust.
d. Press < Enter > to confirm the selection.
13 | Wintal LCD
Manual 27LDVD05.indd Sec1:13
12/07/2005 11:42:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating item is used to set the rating level.
ꢀ Before you enter into the item, the system will request you to input the password
first. After the password is entered correctly, the parental control rating level can be
changed.
ꢀ If you didn’t set any password of Parental Control, the system will request you to
input a new password.
ꢀ If you make a mistake before pressing ENTER, press CLEAR and enter your
4-digit password again.
ꢀ After the new password is entered successfully, press ▲/▼ to change the parental
control rating level. Including the Unlock level, there are a total of 9 levels in the
parental control rating levels. See the Parental Control section for details.
e parental control function is only valid after the disc eject operation is performed
following the parental lock setting.
Password item is used to set the new password or change the old password. Before
you enter into the item, the system will request you to input the old pass word first.
e new password will be accepted only when the old password is input correctly.
e Country code item is used to set the national code. It is a prerequisite that the
setting of the parental control level is only valid when the country code of the unit
is matched with that of the disc.e country code item provides two alphabetical
letters for changes.
ꢀ Before user can enter into the country code item, the system will request you to
input the password first.e country code can be changed only after the password is
input successfully.
Wintal LCD | 14
Manual 27LDVD05.indd Sec1:14
12/07/2005 11:42:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
9.7 “Others” Settings
a. Press < SETUP > key until the screen displays as photo 5.
b. Press ▼ key to selecting PBC - Auto Play – B.L.E. –Load Default – Screen
Saver – Last player Menu setting.
c. Press ► key to adjust.
d. Press < Enter > to confirm the selection.
PHOTO 5
1. PBC item provides 2 options: ON and OFF. Please refer to the section VCD
/ SVCD PBC Menu for the respective descriptions of ON and OFF option of
the PBC function.
2. Auto Play item provides 2 options: ON and OFF. When the option is set as
ON, the auto play function will be activated.
ꢀ e DVD player will search for the DVD disc track that has the longest playback
time, and proceed to play the track.
ꢀ For the VCD and CD discs, the unit will automatically play the VCD/CD disc
from the beginning after the disc is recognized.
15 | Wintal LCD
Manual 27LDVD05.indd Sec1:15
12/07/2005 11:42:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
10.
TROUBLESHOOTING
Before calling our Service Centre, please check if you can troubleshoot the problem
by yourself.
Control
Troubleshooting
Please check that all cables and connectors are
No signal
correctly plugged in.
No colour shades
Adjust the contrast, the colour and the brightness
May be the result of an electrical wave disturbance
from another TV, Computer and Game machine or
Radio
Double or multiple
display image
e cables of the antenna are not correctly plugged
Snow on the screen
in.
Please check the batteries are inserted correctly.
Check that the IR of the remote control is not
hidden by something.
e remote control does
not work
Make sure that you have not press the MUTE button
No sound
No DVD
of the panel or of the remote control.
Make sure if the TV Set have been switched to
DVD mode
Ensure disc is correctly inserted into the player.
DVD player not working Ensure the disc is not damaged and is of correct
properly
format. Please wait as some discs require longer time
to read.
Wintal LCD | 16
Manual 27LDVD05.indd Sec1:16
12/07/2005 11:42:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
11.
SPECIFICATIONS
Screen Size
26 or 27 Inch
Display Type
Resolution(Pixel)
Brightness
TFT LCD
1280 x 720
500 nits
Color
24 bit ( 16,7 million)
Contrast Ratio
View Angle(H/V)
Aspect Ratio
Power
600 : 1
Horizontal 160, Vertical 140, CR10
16:9
100-240 VAC, 50/60HZ. ≤180W
PAL / NTSC
TV System
Video Input Format
Antenna Input
Audio Output
VGA Input Format
RGB
PAL / NTSC
Standard antenna socket 75Ω
L / R 10W x 2
640*480/60Hz 800*600/60Hz 1024*768/60Hz
0.7 VP- P 75 Ω
VIDEO
AV
YcbCr
YpbPr
CVBS: 1.0 Vp – p, 75 Ω ; RCA
Video 1.0 VP – 75 Ω ; Audio 20 KΩ ; RCA
1.0Vp-p 75Ω Audio 20KΩ; RCA
1.0Vp-p 75Ω
Input
DVI
VIDEO 1
AUDIO L/R
640*480/60Hz 800*600/60Hz 1024*768/60Hz
CVBS:1.0 VP- P 75 Ω; RCA
200 mVrms , 20 kΩ ( max.3.0 VP – P ) ; RCA
Output
Disc Physical Format
12cm/8cm DVD, VCD, CD, MP3, JPEG,
CD-R, CD-RW
Video Decompression
IR Remote Control
Weight
MPEG-2 (ISO/IEC-13818), MPEG-1, JPEG
< 6m
20Kg
Dimensions
848(L) * 510 (H) * 240 (W) mm
e manual is only for your reference, any change to the design and specification
will not be advised.
17 | Wintal LCD
Manual 27LDVD05.indd Sec1:17
12/07/2005 11:42:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual 27LDVD05.indd Sec1:18
12/07/2005 11:42:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|