Chronograph
Wenger NA
15 Corporate Drive
Orangeburg, NY 10962 USA
Tel: 1-800-431-2996, 1-845-365-3500
Email: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
Crafted For Life
Wenger Watch Components
Delémont, Switzerland 1893
Movements – Swiss quartz movements featuring a 12-hour or 30-minute timer,
60-second timer, seconds hand timer, and 1/10-second timer.
Over a century ago, Wenger built a factory in this tiny Swiss village and
transformed it into production headquarters for the Genuine Swiss Army
Knife™ still used by the Swiss Army today. As it was 100 years ago, each
tool, implement and knife manufactured by Wenger is crafted by hand in solid
stainless steel and each individually inspected for quality and craftsmanship.
This same attention to detail has been applied to genuine Wenger watches.
Wenger watches are Swiss-designed, -engineered and -crafted with only the
most accurate Swiss movement available. Each watch is constructed with form
and function that last a lifetime. As with the genuine Swiss Army knife, Wenger
watches are durable, high quality, and versatile enough for use on any occasion.
Wenger watches are engineered to provide the same resourcefulness as the
genuine Swiss Army knife, supplying functionality beyond the everyday.
Case Body – All stainless steel or titanium for quality and durability.
Water-Resistant – To 50m (165') or 100m (330') for standard watches.
To 200m (660') or 1000m (3300') for dive watches.
Straps/Bracelets – Stainless steel and titanium bracelets feature dive buckles
or deployant jewelry buckles. Straps are offered in genuine calfskin leather,
specially treated rubberized leather, water-resistant rubber or nylon, or other
high-quality materials.
Luminous Markers – Hands, markers, and numerals may be overlaid with
Super Luminova® which recharges in seconds when exposed to direct sunlight
for extended nighttime visibility.
Crystals – The crystal is the clear surface which covers the watch dial.
Crowns – Crowns are stainless steel knobs on the sides of the case body used
to set the date and time or rotate the internal bezel.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
2
Optional Features
General Features and Components
•Rotating bezel measures elapsed time, dual time zone, and countdown timer
•Tachymeter measures speed over a known distance
•Internal rotating bezel
Bracelet or strap
Rotating bezel
Subdials
•Date display window
Top pusher
•Day of the week display subdial
•Screw-down crown for added water resistance
•Dual time zone option to track time in two known time zones
•Military time features printed 24-hour indicators
•Jeweled movements which decrease friction for accuracy
•Push-button release clasp
(two or three)
Crown (used to
set date and time)
Regular
seconds hand
Bottom pusher
•Mother-of-Pearl dial
Chronograph
seconds hand
Case
Download from Www.Somanuals.com. All Manuals Search And Download.
5
4
Position 1
Position 2
Position 3
1. Pull out the crown to Position 2 (one “click” out). Rotate crown counter-
clockwise until the date shows one day earlier than the date you want to set.
2. Pull out the crown to Position 3 (two “clicks” out). Rotate crown so the watch
hands move clockwise until the current date shows. Then set the watch hands to
the correct time. Turn the watch hands past 12 once if you’re setting the watch
for a P.M. time.
3. Return the crown to the fully depressed Position 1, assuring the crown has been
further screwed down on all 200m watches.
Setting the Time and Date
Important note: If the crown of your watch does not pull directly out or if your
watch is water-resistant to 200m, then you may have a watch with a screw-down
crown. Rotate the crown counterclockwise until the crown moves away from the
watch. This will set the crown in Position 1. Always screw down the crown after
making any adjustments. This is very important as the screw-down crown assures
water resistance.
Using the 30-Minute Chronograph (Stopwatch) Feature
The chronograph feature is a stopwatch which measures minutes, seconds, and
1/10 of a second. It is also capable of measuring split-timed events (timing a
continuous event and sub-events simultaneously; e.g., timing an individual lap
and an entire race). Note: the 1/10-second timer (right subdial) will not move
until the stop button is pushed. It will then record the elapsed 1/10-seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
6
Stopwatch
5. To stop timing the total event, push the top pusher.
1. To start the stopwatch, push the top pusher.
2. To stop it, push the top pusher again.
6. Reset the stopwatch to zero by pushing the bottom pusher.
Recalibrating the Timer Hands on 30-Minute Models
(for Ladies Sport Chronos see p.10)
3. Read the 1/10th seconds, seconds, and minutes on the appropriate dials.
4. To reset the stopwatch to zero, push the bottom pusher.
The timer hands are preset to begin at zero. It is possible that over time the hands
will not begin at zero. If this happens you will need to recalibrate the hands. You
may also set them to begin at a different point (see below).
Note: The clock function of the watch will continue to operate while using the
stopwatch.
1. To recalibrate the 30-minute timer, pull the crown out to Position 3 (unscrew
the crown first if watch is 200m). Press the bottom pusher repeatedly until
seconds hand is in desired starting position.
Using the Split-Timing Function
1. Press the top pusher to start the stopwatch.
2. To recalibrate the seconds hand timer, pull the crown out to Position 2 (unscrew
crown first if watch is 200m). Press the top pusher repeatedly until seconds
hand is in desired starting position.
2. To read a lap or other intermediate segment of time, push the bottom pusher.
The watch hands will stop, but the watch will continue to time the total event
internally.
3. To recalibrate the 1/10-second timer, pull the crown out to Position 2 (unscrew
crown first if watch is 200m). Press the top pusher repeatedly until 1/10-
seconds hand is in desired starting position.
3. To resume timing the total event, push the bottom pusher again.
4. You may repeat this as often as you like. The internal clock will continue to
time the total event each time you repeat the process.
4. Return crown to Position 1 when finished, assuring crown is screwed down on
200m watches.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
8
Recalibrating the Timer Hands on Ladies Sport 30-Minute Chronos
12-Hour Chrono Series
The timer hands are preset to begin at zero. It is possible that over time the hands
will not begin at zero. If this happens you will need to recalibrate the hands. You
may also set them to begin at a different point (see below).
Seconds subdial
Minute subdial
1. To recalibrate the 30-minute timer, pull the crown out to Position 2. Press the
bottom pusher repeatedly until seconds hand is in desired starting position.
Top pusher
2. To recalibrate the seconds hand timer, pull the crown out to Position 3. Press
the top pusher repeatedly until seconds hand is in desired starting position.
3. To recalibrate the 1/10-second timer, pull the crown out to Position 3. Press the
bottom pusher repeatedly until 1/10-seconds hand is in desired starting position.
Crown (used to
set date and time)
4. Return crown to Position 1 when finished.
12-hour subdial
Bottom pusher
Chronograph
seconds hand
Download from Www.Somanuals.com. All Manuals Search And Download.
11
10
Position 1
Position 2
Position 3
Setting the Time and Date
Follow instructions on p.6.
Using the 12-Hour Chronograph (Stopwatch) Feature
The chronograph feature is a stopwatch which measures hours, minutes, and
seconds. It is also capable of measuring split-timed events (timing a continuous
event and sub-events simultaneously; e.g., timing an individual lap and an entire
race).
Stopwatch
Using the Split-Timing Function
1. To start the stopwatch, push the top pusher.
2. To stop it, push the top pusher again.
1. Press the top pusher to start the stopwatch.
2. To read a lap or other intermediate segment of time, push the bottom pusher.
The watch hands will stop, but the watch will continue to time the total event
internally.
3. Read the seconds, minutes, and hours on the appropriate dials
4. To reset the stopwatch to zero, push the bottom pusher.
3. To resume timing the total event, push the bottom pusher again.
Note: The clock function of the watch will continue to operate while using
the stopwatch.
4. You may repeat this as often as you like. The internal clock will continue to
time the total event each time you repeat the process.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
12
5. To stop timing the total event, push the top pusher.
6. Reset the stopwatch to zero by pushing the bottom pusher.
Recalibrating the Timer Hands on 12-Hour Models
1. Pull out the crown to position 3.
Additional Features
(All features may not be available on all models)
Rotating Bezel
This feature enables you to track elapsed time.
1. Turn the bezel counterclockwise until the zero indicator (60) is at the
minute hand.
2. Hold both pushers down simultaneously for 2 seconds; the center hand will
rotate to indicate that the corrective mode is activated. Release the pushers.
2. The position of the minute hand in relation to the zero indicator on the bezel
will indicate the total number of minutes elapsed.
3. Adjusting the seconds hand: Hold or tap the top pusher until the desired time
is reached.
Deployant (Jewelry) Clasp
4. Adjusting the minute/hour counters: Tap the bottom pusher to switch to the
seconds adjusting mode. Then hold or tap the top pusher until the desired time
is reached.
Deployant closures are used to assure a secure fit of your watch and easy
opening and closing. Deployant closures on straps allow for a one-time fitting
instead of refitting each time the watch is worn.
5. Return the crown to the fully depressed Position 1.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
14
Deployant Buckles on Bracelets
3-Year Limited Warranty
Deployant buckles on bracelets are generally double deployant, or two-sided to
hide the buckle and give the bracelet a seamless appearance.
Wenger is proud to stand by our quality Swiss craftsmanship with a 3-Year
Limited Warranty. This Wenger watch is warranted to the original consumer/
purchaser against breakage or malfunction under normal use due to defects
in material or workmanship. This 3-Year Limited Warranty also includes all
components and craftsmanship of the Swiss movement and watch case. We will
repair, or at our option, replace any defective Wenger watch with the same or
comparable model. We will refund the purchase if repair or replacement is not
commercially possible. The warranty will become null and void if the timepiece
is misused, abused, tampered with or taken apart. The warranty is not extended
to the watch strap, bracelet, finish, crystal or battery. The warranty does not cover
any incidental, consequential or special damage arising from any or all uses of the
Wenger watch. Wenger watches must be repaired by an authorized repair center
or the warranty is void. Some states do not allow the exclusion or limitations of
incidental, consequential or special damages, so the above limitations may not
apply.
1. Have the watch fitted by a professional jeweler and
the appropriate links removed.
2. Gently pull on either side of the clasp to open,
or press down to close.
Caring for Your Watch
Even though your watch is water-resistant, it is not recommended that you wear
it in a hot shower, sauna or hot tub. We suggest sending your Wenger watch to
our Customer Service Center for battery replacement (please see procedure under
“Warranty Service”). Batteries should only be replaced by a professional jeweler
to maintain the watch’s water-resistancy. If your watch has a bracelet, we suggest
you see a jeweler for any sizing adjustments.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
16
Warranty Service
In the United States, please send your watch to: WWRC, 15 Corporate Drive,
Orangeburg, NY 10962. Please include a check or money order payable to
Wenger NA in the amount of $10(US) to cover the cost of return shipping
and handling. For battery replacement, please include a check or money order
payable to Wenger NA in the amount of $20(US) to cover the cost of return
shipping, battery change, and pressure testing the watch for water-resistance.
If the watch is not properly serviced, it may void your warranty. If your warranty
has been rendered void as a result of non-compliance with our warranty restric-
tions, we will send you an estimate before any repairs are made. When sending
your watch to our Service Center, please pack it securely. We suggest insuring
the shipment as Wenger NA cannot be responsible for damage or loss in shipping.
Be sure to include your name, mailing address, phone number, email address,
proof of purchase and a brief description of the problem. Note: Do not send
watch boxes.
If you choose to bring your watch to a local professional jeweler for service, be
sure to ask them to reseal your watch to ensure water-resistance. In order to
ensure proper water-resistance, your watch must be pressure sealed. Failure to
do so can damage the movement of your watch.
If you have questions or concerns, please call 800-267-3577 or 800-447-7422
to speak to a Customer Care Associate. You may also visit us on the web at www.
WengerNA.com or contact us via e-mail at [email protected]. In Canada
further instructions.
More information at wengerna.com.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
18
Notes: _____________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Wenger Watch Registration
or complete the form below and mail it to the address on the back. Please
register your watch within 60 days from date of purchase.
Name/Nombre: _____________________________________________________
Address/Dirección: __________________________________________________
City/Cuidad: _______________________________________________________
State/Estado: ______________________ Zip Code/Código Postal: ___________
Email: ____________________________________________________________
Date Acquired/Fecha de Adquisición: ___________________________________
Gift/Regalo
Purchase/Compre
Where Purchased/Lugar de Compre: ___________________________________
Download from Www.Somanuals.com. All Manuals Search And Download.
20
|