Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Overview
VIVOTEK’s outdoor day/night network camera IP7142 is equipped with a wide dynamic range
CMOS sensor to cope with any challenging lighting conditions.
Designed for outdoor 24-hour surveillance, IP7142 features the basics of day and night and
vandal-proof functions that users can easily build up a cost-effective IP surveillance system without
additional accessories. With a removable IR-cut filter and built-in IR illuminators, up to 15m, it
can automatically remove the filter and turn on the IR illuminators during the nighttime to accept
IR illumination for low light sensitivity. Meanwhile, the IP66-rated integrated housing shields this
camera from dust and water, allowing it to be applied in harsh weather conditions of outdoor
environments.
IP7142 with WDR (Wide dynamic range) feature can be very helpful to cope with very challenging
lighting conditions. It is capable of capturing both of the dark part and bright part and combining
the differences into a scene to generate a highly realistic image as the original scene. Because
it preserves as much information in the video as possible, IP7142 helps provide video quality
closer to the capabilities of the human eye. Consequently, it is largely applied in highly contrast
environments such as lobby entrances, parking lots, ATM, loading areas and much more.
Incorporating numbers of advanced features including simultaneous dual streams, 3GPP mobile
surveillance, 802.3af compliant PoE, two-way audio by SIP protocol, RS-485 interface for scanners
or pan/tilts driver connection, and HTTPS encrypted data transmission, VIVOTEK IP7142 allows
users to boost your robust IP surveillance system by reproducing clear images in proper color in
extreme high-contrast environments for your indoor/outdoor security and monitoring applications.
Read before use
The use of surveillance devices may be prohibited by law in your country. The Network Camera
is not only a high-performance web-ready camera but also can be part of a flexible surveillance
system. It is the user’s responsibility to ensure that the operation of such devices is legal before
installing this unit for its intended use.
It is important to first verify that all contents received are complete according to the Package
contents listed below. Take notice of the warnings in Quick Installation Guide before the Network
Camera is installed; then carefully read and follow the instructions in the Installation chapter to
avoid damages due to faulty assembly and installation. This also ensures the product is used
properly as intended.
The Network Camera is a network device and its use should be straightforward for those who
have basic network knowledge. It is designed for various applications including video sharing,
general security/surveillance, etc. The Configuration chapter suggests ways to best utilize the
Network Camera and ensure proper operations. For the creative and professional developers,
the URL Commands of the Network Camera section serves to be a helpful reference to
customize existing homepages or integrating with the current web server.
Package contents
■ IP7142
■ Sun Shield
■ Screws
■ Camera stand
■ Power adapter
■ Silica gel
■ RJ45 female/female coupler
■ Quick installation guide
■ Warranty card
■ Software CD
User's Manual - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Physical description
Front panel
Light sensor
Lens
IR LED
Connectors
General I/O terminal block
Ethernet 10/100 RJ45 plug
Audio out (green)
Microphone in (pink)
Power cord socket (black)
Earth
General I/O Terminal Block
This Network Camera provides a general I/O terminal block which is used to connect external
input / output devices. The pin definitions are described below.
N.C.: No Connector
N.C.
485B
485A
AC24V
485B: RS485-
485A: RS485+
AC24V
AC24V: Power in AC 24V
AC24V: Power in AC 24V
GND: Ground
GND
DI : Digital Input
DI
DO : Digital Output
DO
+12V
+12V : Power, 12V DC
Pin
N.C.
Name
No Connector
RS485-
Specification
485B
485A
AC24V
AC24V
GND
DI
3.3V
3.3V
AC 24V 5%
AC 24V 5%
RS485+
Power in AC 24V
Power in AC 24V
Ground
Digital Iutput
Digital Output
Power +12V
OPEN/Short-to-GND, isolation 2kV
Max. 40VDC, max. 400mA, isolation 2kV
12VDC 10%, max. 0.4A
DO
+12V
4 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
DI/DO Diagram
Refer to the following illustration for connection method.
12V
PIN 1
Power+12V
PIN 2
Digital output
+12V
PIN 3
Digital input
PIN 4
Ground
Status LED
The LED indicates the status of the Network Camera.
Status LED
Description
1. Power is being supplied to the Network Camera
2. Restore, or reboot the Network Camera
Blinking red (two short, one long)
User's Manual - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Hardware Reset
Reset button
Status LED
There is a reset button on the inner side of the Network Camera. It is used to reboot the Network
Camera or restore the Network Camera to factory default. Sometimes rebooting the Network
Camera could set the Network Camera back to normal state. If the problems remain after
rebooted, restore the Network Camera to factory default and install again.
Reboot: Press and release the reset button. The status LED will blinks two short one long in red.
Restore: Press the reset button continuously for over 5 seconds until the status LED blinks two
short one long in red. Note that all settings will be restored to factory default.
Installation
Hardware installation
Follow the steps below to install the Network Camera:
1. Open the lens cover.
2. Secure the Network Camera to the wall/ceiling by the supplied camera stand.
2
1
3. Feed power to the Network Camera and connect it to the Internet. For more information,
please refer to Network deployment on page 8 for details.
6 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
4. Install the “Installation Wizard 2“ to assign IP address to the Network Camera. For more
information, please refer to Software installation on page 11 for details.
5. Access to the Network Camera from the Internet. For more information, please refer to
Accessing the Network Camera on page 12 for details.
6. Unscrew the zoom controller to adjust the zoom factor. Upon completion, tighten the zoom
controller. Unscrew the focus controller to adjust the focus range. Upon completion, tighten
the focus controller.
7. Put the supplied silica gel into the Network Camera and tighten the lens cover.
(Please replace the silica gel with a new one if you open the lens cover after installation.)
W
W
T
∞
N
N
Note
If you want to use the supplied sun sheild for outdoor environments, please follow the steps
below to install:
1. Tighten the supplied two screws.
2. Attach the supplied sun shield to the Network Camera and slide it to the desired position.
3. Fix the sun shield with supplied two screws. (Please use different screws for ceiling mount.)
1
2
4
3
Wall mount
Ceiling mount
User's Manual - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Network deployment
Setup the Network Camera over the Internet
This section explains how to configure the Network Camera to Internet connection.
1. If you have external devices such as sensors and alarms, make connection from general I/O
terminal block.
2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch.
Use Catagory 5 Cross Cable when Network Camera is directly connected to PC.
3. Connect the power cable from the Network Camera to a power outlet.
N.C.: No Connector
485B: RS485-
1
485A: RS485+
AC24V: Power in AC 24V
AC24V: Power in AC 24V
GND: Ground
GND
DI : Digital Input
DI
DO
+12V
DO : Digital Output
+12V : Power, 12V DC
LINK
IV
P
OW
E
R
C
OLLI
S
ION
R
E
C
E
TI
ION
E
1
P
2
AR
T
3
4
5
2
1
Ethernet switch
3
There are several ways to setup the Network Camera over the Internet. The first way is to setup
the Network Camera behind a router. The second way is to utilize a static IP. The third way is to
use PPPoE.
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated as
below. About how to get your IP address, please refer to Software installation on page 10 for
details.
IP address : 192.168.0.3
WAN (Wide Area Network )
Subnet mask : 255.255.255.0
RutIP ddss fm ISP
Default router : 192.168.0.1
Internet
L
INK
P
O
W
E
R
C
O
L
L
ISIO
N
R
E
C
E
IV
IT
E
1
2
3
P
AR
T
4
5
I
O
N
LAN (Local Area Network)
RutIP ddss : 192.168.0.1
Cable or DSL Modem
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1
8 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is
192.168.0.3, please forward the following ports for the Network Camera on the router.
■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video
If you have changed the port numbers on the Network page, please open the ports accordingly
on your router. For information on how to forward ports on the router, please refer to the user’s
manual of your router.
3. Find out the public IP address of your router provided by your ISP (Internet Service Provider).
Use the public IP and the secondary HTTP port to access the Network Camera from the
Internet. Please refer to Network Type on page 28 for details.
Internet connection with static IP
Choose this connection type if you are required to use a static IP for the Network Camera and
follow the steps below.
1. Set up the Network Camera in a LAN. Please refer to Software installation on page 10 for
details.
2. Go to Configuration > Network > Network Type. Select LAN > Use fixed IP address.
3. Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.
Internet connection via PPPoE (Point-to-Point over Ethernet)
Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to
PPPoE on page 29 for details.
User's Manual - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Set up the Network Camera through Power over Ethernet (PoE)
When using a PoE-enabled switch
The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet
cable. If your switch/router supports PoE, refer to the following illustration to connect the
Network Camera to a PoE-enabled switch/router via an Ethernet cable.
power + data transmission
LINK
P
OWE
R
C
OLLI
SION
R
E
C
E
IV
AR
ITIO
E
N
1
2
P
3
T
4
5
PoE switch
When using a non-PoE switch
If your switch/router does not support PoE, use a PoE power injector (optional) to connect
between the Network Camera and a non-PoE switch/router.
PoE power injector
(optional)
LINK
P
OW
E
R
C
OLLI
SION
R
AR
E
C
E
IVE
1
2
P
3
TITIO
4
N
5
non-PoE switch
10 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Software installation
Installation Wizard 2 (IW2), free-bundled software packaged in the product CD, helps to set up
your Network Camera in a LAN.
1. Install the IW2 under the Software Utility directory from the software CD.
Double click the IW2 shortcut on your desktop to launch the program.
2. The program will conduct analyses on your network environment.
After your network environment is analyzed, please click Next to continue the program.
3. The program will search all VIVOTEK devices in the same LAN.
4. After searching, the main installer window will pop up. Click on the MAC and model name
which match the product label on your device to connect to the Network Camera.
1
0002D17142AD
2
Model No.: IP7142
0002D17142AD
P/N:
100043690G
EAN: 4712123671550
Q'ty:
S/N:
1
PCS
0002D17142AD
F/W Ver.: 0100G
CARTON OF NO. !!0!!01
MADE IN TAIWAN
User's Manual - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Accessing the Network Camera
This chapter explains how to access the Network Camera through web browsers, RTSP players,
3GPP-compatible mobile devices, and VIVOTEK recording software.
Using web browsers
1. Launch your web browser (ex. Microsoft® Internet Explorer, Mozilla Firefox or Netscape).
2. Enter the IP address of the Network Camera in the address field. Press Enter.
3. The live video will be displayed in your web browser.
Network Camera
NOTE
► For Mozilla Firefox or Netscape users, your browser will use Quick Time to stream the live
video.
Network Camera
Network Camera
12 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
► By default, the Network Camera is not password-protected. To prevent unauthorized
accesses, it is highly recommended to set a password for the Network Camera.
For more information about how to enable password protection, please refer to Security on
page 24.
► If you see a warning message at initial access, click Yes to install an ActiveX® control on your
computer.
► If you see a dialog box indicating that your security settings prohibit running ActiveX®
Controls, please enable your ActiveX® Controls for your browser.
1. Choose Tools > Internet Options > Security > Custom Level.
2. Look for Download signed ActiveX® controls; select Enable or Prompt. Click OK.
User's Manual - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Using RTSP players
To view the MPEG-4 streaming media using RTSP players, you can use one of the following
players that support RTSP streaming.
Quick Time Player
Real Player
1. Launch a RTSP player.
2. Choose File > Open URL. An URL dialog box will pop up.
3. Type the URL command in the text box.
The format is rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example:
rtsp://192.168.5.132:554/live.sdp
4. The live video will be displayed in your player.
For more information on how to configure RTSP access name, please refer to RTSP
Streaming on page 34 for details.
14 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Using 3GPP-compatible mobile devices
To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed from the Internet. For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8.
To utilize this feature, please check the following settings on your Network Camera:
1. Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disable.
For more information, please refer to RTSP Streaming on page 34.
2. As the 3G network bandwidth is limited, you can’t use large video size. Please set the video
and audio streaming parameters as listed below.
For more information, please refer to Audio and video on page 39.
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
MPEG-4
176 x 144
5 fps
1S
40kbps
12.2kbps
3. As most ISP and players only support port number 554 to allow RTSP streaming to go
through, please set the RTSP port to 554.For more information, please refer to RTSP
Streaming on page 34.
4. Launch the players on 3GPP-compatible mobile devices, (ex. Real Player).
Type the URL commands in the player.
The format is rtsp://<public ip address of your camera>:<rtsp port>/<access name for stream1
or stream2>.
For example:
rtsp://192.168.5.132:554/live.sdp
User's Manual - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Using VIVOTEK recording software
The product software CD also contains recording software, allowing simultaneous monitoring
and video recording for multiple Network Cameras. Please install the recording software; then
launch the program to add the Network Camera to the Channel list. For detailed information
about how to use the recording software, please refer to the user’s manual of the software or
16 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Main Page
This chapter explains the layout of the main page. It is composed of the following four sections:
Logo of VIVOTEK INC., Menu, Host Name, and Live Video Window.
Network Camera
Host name
Logo of VIVOTEK INC.
Menu
Live view window
Logo of VIVOTEK INC.
Click this logo to visit VIVOTEK website.
Menu
Snapshot: Click this button to capture and save still images. The captured images will be displayed in
a pop-up window. Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP
(*.bmp) format.
Language: Click this button to choose a language for the displayed interface. Language options are
ᖅᡝϛМ
available in: English, Deutsch, Español, Français, Italiano, ᮹ᴀ䁲, Português, ㇵԧЁ᭛ and
.
Configuration: Click this button to access the configuration page of Network Camera. It is suggested that
a password is applied to the Network Camera so that only the administrator can configure the Network
Camera. For more information, please refer to Configuration on page 22.
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 20.
Digital Output: Click this button to turn on or off the digital output device.
Host Name
The host name can be customized to fit your needs. For more information, please refer to System
on page 22.
User's Manual - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Live Video Window
The following window is displayed when the video mode is set to MPEG-4:
MPEG-4 protocol and media options
IP7142(TCP-AV)
Video title
Title and time
Time
IP7142 16:38:01 2008/01/03
Video and audio
control buttons
Video title: The video title can be configured. For more information, please refer to Video settings on page 39.
Time: Display the current time. For more information, please refer to Video settings on page 39.
Title and time: Video title and time can be stamped on the streaming video. For more information, please
refer to Video settings on page 39.
MPEG-4 protocol and media options: The transmission protocol and media options for MPEG-4 video
streaming. For more information, please refer to Client Settings on page 20.
Video and audio control buttons: Depending on the Network Camera model and Network Camera
configuration, some buttons may not be available.
Digital zoom edit: Deselect Disable digital zoom to enable the zoom operation. The navigation screen
indicates which part of the image is being magnified. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen.
Start MP4 recording: Click this button to record video clips in MP4 file format to your computer. Press
the
Stop MP4 recording button to end recording. When you quit the web browser, video recording
stops accordingly. To specify the storage destination and the file name, please refer to MP4 Saving
Options on page 21 for details.
Talk: Click this button to talk to people around the Network Camera. Audio will come out from the
external speaker connected to the Network Camera.
Pause: Pause the transmission of streaming media. The button becomes
clicking the Pause button.
Resume button after
Resume: Resume the transmission of streaming media. The button becomes
clicking the Resume button.
Pause button after
Stop: Stop the transmission of streaming media. Click the
transmission.
Resume button to continue
Volume: When the
computer.
mute function is not activated, move the slider bar to adjust the volume at local
18 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Mute: Turn off the
volume at local computer.
Mic Volume: When the
mute function is not activated, move the slider bar to adjust the
microphone volume at local computer.
Mute: Turn off the
microphone volume at local computer.
The following window is displayed when the video mode is set to MJPEG:
IP7142
Video title
Title and time
Time
GATE 10:11:50 2008/01/09
Video control
buttons
Video title: The video title can be configured. For more information, please refer to Video settings on
page 39.
Time: Display the current time. For more information, please refer to Video settings on page 39.
Title and time: Video title and time can be stamped on the streaming video. For more information, please
refer to Video settings on page 39.
Video and audio control buttons: Depending on the Network Camera model and Network Camera
configuration, some buttons may not be available.
Digital zoom edit: Deselect Disable digital zoom to enable the zoom operation. The navigation screen
indicates which part of the image is being magnified. To control the zoom level, drag the slider bar. To
move to a different area you want to magnify, drag the navigation screen.
Start MP4 recording: Click this button to record video clips in MP4 file format to your computer. Press
the
Stop MP4 recording button to end recording. When you quit the web browser, video recording
stops accordingly. To specify the storage destination and the file name, please refer to MP4 Saving
Options on page 21 for details.
Talk: Click this button to talk to people around the Network Camera. Audio will come out from the
external speaker connected to the Network Camera.
Mic Volume: When the
mute function is not activated, move the slider bar to adjust the
microphone volume at local computer.
Mute: Turn off the microphone volume at local computer.
User's Manual - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Client Settings
This chapter explains how to select the streaming source, transmission mode and saving options
at local computer. It is composed of the following four sections: Stream Options, MPEG-4 Media
Options, MPEG-4 Protocol Options and MP4 Saving Options. When completed with the settings
on this page, click Save on the page bottom to take effect.
Stream Options
The Network Camera supports MPEG-4 and MJPEG dual streams. For more information,
please refer to Video settings on page 39.
MPEG-4 Media Options
Select to stream video or audio data. This works only when the video mode is set to MPEG-4.
MPEG-4 Protocol Options
Depending on your network environment, there are four transmission modes of MPEG-4
streaming:
UDP unicast: This protocol allows for more real-time audio and video streams. However, network
packets may be lost due to network burst traffic and images may be broken. Activate UDP connection
when occasions require time-sensitive responses and the video quality is less important. Note that each
unicast client connecting to the server takes up additional bandwidth and the Network Camera allows up
to ten simultaneous accesses.
UDP multicast: This protocol allows multicast-enabled routers to forward network packets to all clients
requesting streaming media. This helps to reduce the network transmission load of the Network Camera
while serving multiple clients at the same time. Note that to utilize this feature, the Network Camera
must be configured to enable multicast streaming at the same time. For more information, see RTSP
Streaming on page 34.
20 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
TCP: This protocol guarantees the complete delivery of streaming data and thus provides better video
quality. Nevertheless, the downside with this protocol is that its real-time effect is not as good as that of
the UDP protocol.
HTTP: This protocol allows the same quality as TCP protocol and you don’t need to open specific port
for streaming under some network environments. Users inside a firewall can utilize this protocol to allow
streaming data to come through.
MP4 Saving Options
Users can record the live video as they are watching it by clicking
Start MP4 Recording on
the main page. Here, you can specify the storage destination and file name.
Folder: Specify a storage destination for the recorded video files.
File Name Prefix: Enter the text that will be put in front of the video file name.
Add date and time suffix to the file name: Select this option to add date and time to the file name suffix.
CLIP_20080108-180853
Date and time suffix
The format is: YYYYMMDD_HHMMSS
File name prefix
User's Manual - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Configuration
Only Administrators can access the system configuration page. Each category in the left menu
will be explained in the following sections.
System
This section explains how to configure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following three columns: System, System
Time and DI and DO. When completed with the settings on this page, click Save on the page
bottom to take effect.
System
Network Camera
Host name: Set a desired name for the Network Camera. The text will be displayed at the top of the main
page.
System Time
22 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Enable Daylight Saving Time: Select this option to enable daylight saving time (DST). During DST, the
system clock moves one hour ahead. Note that to utilize this feature, please set the time zone for your
Network Camera first. Then, the starting time and ending time of the DST is displayed upon selecting
this option. To manually configure the daylight saving time rules, please refer to Upload / Export Daylight
Saving Time Configuration File on page 62 for details.
Time zone: According to your local time zone, select one from the drop-down list.
Keep current date and time: Select this option to reserve the current date and time of the Network
Camera. The Network Camera’s internal real-time clock maintains the date and time even when the
power of the system is turned off.
Sync with computer time: Select this option to synchronize the date and time of the Network Camera with
the local computer. The read-only date and time of the PC is displayed as updated.
Manual: The administrator can enter the date and time manually. Note that the date and time format are
[yyyy/mm/dd] and [hh:mm:ss].
Automatic: The Network Time Protocol is a protocol serves synchronize computer clocks by periodically
querying an NTP Server.
NTP server: Assign the IP address or domain name of the time-server. Leaving the text box blank
connects the Network Camera to the default time-servers.
Update interval: Select to update the time with the NTP server on hourly, daily, weekly, or monthly basis.
DI and DO
Digital input: Select High or Low to define normal status of the digital input. The Network Camera will
report the current status.
Digital output: Select Grounded or Open to define normal status of the digital output. The Network
Camera will show whether the trigger is activated or not.
User's Manual - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Security
This section explains how to enable password protection and create multiple accounts. It is
composed of the following three columns: Root Password, Add User and Manage User.
Root Password
The administrator account “root” is permanent and can not be deleted. Please note that if you
want to add more accounts, you must apply a password for the “root” account first.
1. Type the password identically in both text boxes.
2. Click Save to enable password protection.
3. A window will be prompted for authentication; type the correct user’s name and password in related
fields to access the Network Camera.
Add User
Administrators can add up to twenty user accounts.
1. Input the new user’s name and password.
2. Select the desired security level. Click Add to take effect.
Access rights are sorted by user types. There are three kinds of user types. Only administrators
can access the Configuration page. Operators and viewers can not access the configuration
page. Though operators can not access the page, they are capable of using the url commands
to get and set the value of parameters. For more information, please refer to URL Commands of
the Network Camera on page 65. Viewers can only access the main page.
Manage User
Here you can change user’s access rights or delete user accounts.
1. Pull down the user list to find an account.
2. Make necessary changes and then click Save or Delete to take effect.
24 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
HTTPS
This section explains how to enable authentication and encrypted communication over
SSL.
Enable HTTPS
Select this option to turn on the HTTPS communication.
Create and Install Certificate
Select either to create a self-signed certificate or a signed certificate.
To create a certificate from a certificate authority
1. Click Create for Certificate request. The Create Certificate window will pop up.
2. Fill in the information required for generating a Certificate Signing Request (CSR) and click Save.
192.168.5.132
3. Here is an example of a CSR:
User's Manual - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
4. Look for a trusted certificate authority that issues digital certificates. Enroll the Network Camera.
Wait for the certificate authority to issue a SSL certificate; then upload the issued certificate to the
Network Camera.
5. Browsing the Network Camera using HTTPS helps to protect streaming data over the Internet.
Network Camera
To create a self-signed certificate
1. Click Create for Create and Install Certificate. This pops up the Create Certificate window.
26 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
2. Fill in the information required for generating a Certificate Signing Request (CSR) and click Save.
192.168.5.132
3. Browsing the Network Camera using HTTPS helps to protect streaming data over the Internet.
Network Camera
Certificate Information
Here display the certification information. Users may click Property for details. To remove the signed
certificated, uncheck the Enable HTTPS secure connection and click Remove.
192.168.5.132
User's Manual - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Network
This section explains how to configure wired network connection for the Network Camera. It is
composed of the following five columns: Network Type, HTTP, Two way audio, FTP and RTSP
Streaming. When completed with the settings on this page, click Save to take effect.
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network (LAN) and is
intended to be accessed by local computers.
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a
DHCP server each time the camera is connected to the LAN.
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera.
Please refer to Internet connection with static IP on page 9 for details.
Enable UPnP presentation: Select this option to enable UPnPTM presentation for your Network Camera
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places. Currently, UPnPTM is supported by Windows XP or later. Note that to
utilize this feature, please make sure the UPnPTM component is installed on your computer.
Network Camera
Network Camera (192.168.5.132)
Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to
allow the Network Camera to open ports on the router automatically so that video streams can be sent
out from a LAN. To utilize of this feature, make sure that your router supports UPnPTM and it is activated.
28 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
PPPoE (Point-to-point over Ethernet)
Select this option to configure your Network Camera to make it accessible from anywhere as
long as there is an Internet connection. Note that to utilize this feature, it requires an account
provided by your ISP.
Follow the steps below to acquire your Network Camera’s public IP address.
1. Set up the Network Camera in a LAN.
2. Go to Configuration > Application > Server Settings (please refer to Server Settings on page 52) to
add a new server -- email or FTP server.
3. Go to Configuration > Application > Media Settings (please refer to Media Settings on page 50). Select
System log so that you will receive a list of system log in TXT file format which contains the Network
Camera’s public IP address in your email or on the FTP server.
4. Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password
provided by your ISP. Click Save to take effect.
5. The Network Camera starts to reboot.
6. Disconnect the power source of the Network Camera; remove it from the LAN environment to the
Internet.
NOTE
► If the default ports are already used by other device connecting to the same router,
the Network Camera will select other ports for the Network Camera.
► If UPnPTM is not supported by your router, you will see the following message.
► Steps to enable UPnPTM user interface on your computer:
Note that you must log on to the computer as a system administrator to install the UPnPTM
components.
1. Go to Start, click Control Panel, and then click Add or Remove Programs.
User's Manual - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components.
3. In the Windows Components Wizard dialog box, select Networking Services and then click
Details.
4. In the Networking Services dialog box, select Universal Plug and Play and then click OK.
5. Click Next in the following window.
6. Click Finish. UPnPTM is enabled.
► How does UPnPTM work?
UPnPTM networking technology provides automatic IP configuration and dynamic discovery of devices
added to a network. Services and capabilities offered by networked devices, such as printing and file
sharing, are available among each other without bothersome network configuration. In the case of
Network Cameras, you will see Network Camera shortcuts at My Network Places.
30 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
► Enabling UPnP port forwarding allows the Network Camera to open secondary HTTP port on the
router, not HTTP port, meaning that you have to add the secondary HTTP port number behind the
Network Camera’s public address in order to access the Network Camera from the Internet. For
example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list
below for the Network Camera’s IP address.
From the Internet
In a LAN
► If the PPPoE settings are incorrectly configured or the Internet access is not working, restore the
Network Camera to factory default; please refer to Restore on page 61 for details. After the Network
Camera is reset to factory default, it is accessible in a LAN.
HTTP
Authentication: Depending on your network security requirements, the Network Camera provides two
types of security settings for a HTTP transaction: basic and digest. If basic authentication is selected,
the password is sent in plain text format; there can be potential risks of being intercepted. If digest
authentication is selected, user credentials are encrypted in MD5 algorithm and thus provide better
protection against unauthorized accesses.
HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is
set to 8080. Also, they can be assigned with another port number between 1025 and 65535. If the ports
are incorrectly assigned, the following warning messages are displayed:
To access the Network Camera within a LAN, both HTTP port and secondary HTTP port can
be used to access the Network Camera. For example, when the HTTP port is set to 80 and the
secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.
In a LAN
Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the
streaming source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video
mode is set to JPEG, users will receive continuous JPEG pictures. This technology, known as “server
push”, allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape.
User's Manual - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
For example, when the access name for stream 1 is set to video.mjpg:
1. Launch Mozilla Firefox or Netscape.
2. Type the URL command in the address field. Press Enter.
3. The JPEG images will be displayed in your web browser.
NOTE
► To utilize the HTTP authentication, make sure that your have set a password for the Network Camera
first; please refer to Security on page 24 for details.
► Microsoft® Internet Explorer does not support server push technology; therefore, using http://<ip
address>:<http port>/<access name for stream1 or stream2> will fail to access the Network Camera.
HTTPS
By default, the HTTPS port is set to 443. Also, it can be assigned with another port number
between 1025 and 65535.
Two way audio
By default, the two way audio port is set to 5060. Also, it can be assigned with another port
number between 1025 and 65535.
32 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
The Network Camera supports two way audio communication so that operators can transmit
and receive audio simultaneously. By using the Network Camera’s built-in microphone and an
external speaker, you can communicate with people around the Network Camera.
Note that as JPEG only transmits a series of JPEG images to the client, to utilize this feature,
make sure the video mode is set to “MPEG-4” and the media option is set to “Video and Audio”.
Audio send to operators
America
Audio send from operators
Taiwan
Audio is being transmitted to the Network Camera
IP7142(TCP-AV)
Talk button
Mute
Microphone volume
Click
to enable audio transmission to the Network Camera; click
to adjust the volume of
microphone; click
to turn off the audio. To stop talking, click
again.
FTP
The FTP server allows the Network Camera to utilize VIVOTEK Installation Wizard 2 to upgrade
firmware. By default, the FTP port is set to 21. Also, it can be assigned with another port number
between 1025 and 65535.
User's Manual - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
RTSP Streaming
Authentication: Depending on your network security requirements, the Network Camera provides
three types of security settings for streaming via RTSP protocol: disable, basic and digest. If basic
authentication is selected, the password is sent in plain text format; there can be potential risks of being
intercepted. If digest authentication is selected, user credentials are encrypted in MD5 algorithm and thus
provide better protection against unauthorized accesses.
The accessibility of the RTSP streaming for the three authentication modes are listed in the following
table:
Quick Time player
Real Player
Disable
Basic
Digest
O
O
O
O
O
X
O indicates that the authentication mode is supported by the RTSP player.
X indicates that the authentication mode is NOT supported by the RTSP player.
Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the
streaming source. When using a RTSP player to access the Network Camera, and the video mode is set
to MPEG-4, use the following RTSP URL command to request a transmission of streaming data.
rtsp://<ip address>:<rtsp port>/<access name for stream1 or stream2>
For example, when the access name for stream 1 is set to live.sdp:
1. Launch a RTSP player.
2. Choose File > Open URL. An URL dialog box will pop up.
3. Type the URL command in the text box.
For example:
rtsp://192.168.5.132:554/live.sdp
34 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
4. The live video will be displayed in your player.
RTSP port /RTP port for video, audio/ RTCP port for video, audio
The RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port
number is set to 554.
The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By default,
the RTP port for video is set to 5556 and the RTP port for audio is set to 5558.
The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the data by
monitoring Internet traffic volume. By default, the RTCP port for video is set to 5557 and the RTCP port
for audio is set to 5559.
The five ports can be changed between 1025 and 65535. The RTP port must be an even number and
the RTCP port is RTP port number plus one, and thus always be odd. When the RTP port changes, the
RTCP port will change accordingly.
If the RTP ports are incorrectly assigned, the following warning message is displayed:
Multicast settings for stream 1 / Multicast settings for stream 2: Select the Always multicast to enable
multicast for stream 1 or stream 2. Unicast video transmission delivers a stream through point-to-point
transmission; multicast, on the other hand, sends a stream to the multicast group address and allows
multiple clients to acquire the stream by requesting a copy from the Multicast group address.
The five ports can be changed between 1025 and 65535. The multicast RTP port must be an even
number and the multicast RTCP port number is the multicast RTP port number plus one, and thus it is
always be odd. When the multicast RTP port changes, the multicast RTCP port will change accordingly.
If the multicast RTP video ports are incorrectly assigned, the following warning message is displayed:
Multicast TTL [1~255]:The multicast TTL (Time to live) is the value that tells the router the range a packet
can be forwarded.
NOTE
► To utilize the RTSP streaming authentication, make sure that your have set a password for the
Network Camera first; please refer to Security on page 24 for details.
User's Manual - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
DDNS
This section explains how to configure dynamic domain name service for the Network Camera.
DDNS is a service that allows your Network Camera, especially when assigned with a dynamic
IP address, to have a fixed host and domain name.
DDNS: Dynamic domain name service
Enable DDNS: Select this option to enable the DDNS setting.
Provider: Select a DDNS provider of your choice from the Provider drop-down list.
VIVOTEK offers safe100, a free dynamic domain name service to VIVOTEK customers. It is recommended
that you register with the safe100 to access the Network Camera from the Internet. Additionally, we
offer other DDNS providers, such as Dyndns.org(Dynamic), Dyndns.org(Custom), TZO.com, DHS.org,
CustomSafe100, dyn-interfree.it. Note that to utilize this feature, please apply a dynamic domain account
first.
■ Safe100.net
1. In the DDNS column, select Safe100 from the Provider drop-down list. Click Agree when you agree
with the terms of the Service Agreement.
2. In the Register column, fill in the Host name, Email, Key and Confirm Key and then click Register.
After a host name has been successfully created, you will see a successful message in the DDNS
Registration Result column, indicating that you have successfully applied a domain name on
Safe100.net.
36 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
3. Click Copy and all the registered information will be uploaded to the corresponding fields in the
DDNS column.
[Register] Successfully. Your account information has
been mailed to registered e-mail address.
4. Select Enable DDNS and then click Save to take effect.
■ CustomSafe100
VIVOTEK offers documents to establish CustomSafe100 DDNS server for distributors and system
integrators. You can use CustomSafe100 to register a dynamic domain name if your distributor or system
integrators offer such services.
1. In the DDNS column, select CustomSafe100 from the Provider drop-down list.
2. In the Register column, fill in the Host name, Email, Key and Confirm Key; then click Register.
After a host name has been successfully created, you will see a successful message in the
DDNS Registration Result column, indicating that you have successfully registered a domain
name on CustomSafe100.
3. Click Copy and all the registered information will be uploaded to the corresponding fields in
the DDNS column.
4. Select Enable DDNS and then click Save to take effect.
Forget key: Click this button if you forget the key of Safe100 or CustomSafe100. Your account
information will be sent to your email address.
Refer to the following links to apply a dynamic domain account when selecting other DDNS
providers:
User's Manual - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Access list
This section explains how to control the access permission by checking the client PC’s IP
addresses. It is composed of the following four columns: Allowed list, Denied list, Delete allowed
list, and Delete denied list.
Allowed list / Denied list
There are two lists for permission control: Allowed list and Denied list. Only those clients whose IP
addresses are in the Allowed list and not in the Denied list can access the Network Camera.
1. In the Allowed list or Denied list column, type the starting IP address and ending IP address in the text
boxes. A total of ten lists can be configured for both columns.
2. Click Add to take effect.
NOTE
► For example, when the range of allowed list is set from 1.1.1.0 to 192.255.255.255 and the range
of denied list is set from 1.1.1.0 to 170.255.255.255, Only users’ IP located between 171.0.0.0 and
192.255.255.255 can access the Network Camera.
Denied
List
Alowed
List
Delete allowed list / Delete denied list
1. In the Delete allowed list or Delete denied list, select a list from the drop-down list.
2. Click Delete to take effect.
38 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Audio and video
This section explains how to cofigure audio and video performances of the Network Camera. It
is composed of the following two columns: Video settings and Audio settings.
Video settings
Video title: Enter a name that will be displayed on the title bar of the live video.
IP7142(TCP-AV)
Color: Select to display colorful or black/white video streams.
Power line frequency: Set the power line frequency in consistent with local utility settings to eliminate
uncomfortable image flickering associated with fluorescent lights. Note that after the power line frequency
is changed, it is required to disconnect and reconnect the power cord of the Network Camera in order for
the new setting to take effect.
User's Manual - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)
to correct the image orientation.
White balance: Adjust the value for best color temperature.
■ Auto
The Network Camera automatically adjusts the color temperature of light in response to different light
sources. The white balance setting defaults to Auto and works well in most situations.
■ Keep current value
Follow the steps below to manually set the white balance to compensate for the ambient lighting
conditions.
1. Set the White balance to Auto.
2. Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color
temperature automatically.
Maximum Exposure Time: 1/30 S, 1/15 S, 1/5 S, and Auto.
Overlay title and time stamp on video: Select this option to place the video title and time on video
streams.
Note that when the frame size is set to 176 x 144 as the right picture below, only time will be stamped on
video streams.
IP7142(TCP-AV)
IP7142(TCP-AV)
IP7142 10:02:45 2008/05/02
10:02:45 2008/05/02
Image Settings
Click Image settings to open the Image Settings page. In this page, you can tune Brightness, Saturation,
Contrast, and Hue for video compensation. Each field has eleven levels ranged from -5 to +5. The value
0 indicates default auto tuning. You can click Preview to fine-tune the image, or click Restore to recall the
original settings without incorporating the changes. When completed with the settings on this page, click
Save to take effect and click Close to quit the page.
40 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Privacy mask
Click Privacy Mask to open the Privacy Mask page. In this page, you can block out some sensitive zones
for privacy concerns.
■ To set the privacy mask windows, follow the steps below:
1. Click New to add a new window.
2. To resize and drag-drop the window, which is recommended to be at least twice the size of the object
(height and width) you want to cover.
3. Enter a descriptive Window Name and click Save to take effect.
4. Select Enable privacy mask to enable this function.
NOTE
►
Up to 5 privacy mask windows can be set in the same screen.
► If you want to delete the window, please click on the ‘x’ at the upper right-hand corner of the window
to close the window.
Sensor Settings
Click Sensor Settings to open the Sensor Settings page. In this page, you can set the exposure level,
AGC, auto iris, WDR (Wide Dynamic Range), night mode, and IR cut filter.
User's Manual - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Exposure level:
You can manually set up the Exposure level, which ranges from 1 to 8. The default value is 4.
AGC (Auto Gain Control):
You can manually set up the AGC level (2X, 4X, or 8X). The default value is 4X.
Enable auto iris:
Select it to enable the auto iris function.
Enable WDR (Wide Dynamic Range):
Select it to enable the WDR function. This Network Camera with WDR feature can cope with very
challenging lighting conditions. It is capable of capturing both of the dark part and bright part of a target and
combining the differences into a scene to generate a highly realistic image as the human eyes can see.
Note that if you select this function, Exposure level and AGC function will be disabled.
Switch to B/W in night mode:
Select it to enable the Network Camera to automatically switch to B/W in night mode.
IR cut filter:
With a removable IR-cut filter and built-in IR illuminators, up to 15m, this Network Camera can automatically
remove the filter and turn on the IR illuminators during the nighttime to accept IR illumination for low light
sensitivity.
■ Auto
The Network Camera automatically removes the filter by judging the level of ambient light.
■ Schedule mode
The Network Camera switches between day mode and night mode based on specified schedule.
Enter the starting time and ending time for the day mode. Note that the time format is [hh:mm] and is
expressed in 24-hour clock time. By default, the starting time and ending time of day mode are set to
07:00 and 18:00.
■ Day mode
In day mode, the Network Camera switches on the IR cut filter at all times to block the infrared light
from reaching the sensor so that the colors will not be distorted.
■ Night mode
In night mode, the Network Camera switches off (remove) the IR cut filter to allow the infrared light to
pass through. This improves the sensitivity of the Network Camera in low-light conditions.
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes. When completed with the settings on this page, click Save to take effect and
click Close to quit the page.
Video quality settings for stream 1 / stream 2: You can set up two seperate streams for the Network
Camera for different viewing devices. For example, set the Network Camera to a smaller frame size and
a lower bit rate for remote viewing on mobile phones. Or, set the Network Camera to a larger video size
and a higher bit rate for live viewing on web browsers.
■ Mode
The Network Camera offers two choices of video compression standards for real-time viewing: MPEG-4
and MJPEG.
42 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
If MPEG-4 is selected, it is streamed in RTSP protocol. There are four dependent parameters provided
in MPEG-4 mode for video performance adjustment.
■ Frame size
Select the video size. Note that a larger frame size takes up more bandwidth. The frame sizes are
selectable in the following resolutions: 176 x 144, 352 x 240 and 720 x 480.
■ Maximum frame rate
This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video
quality.
If the power line frequency is set to 50Hz, the frame rates are selectable at the following rates: 1fps,
2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps and 25fps. If the power line frequency is set to 60Hz, the
frame rates are selectable at the following rates: 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps,
25fps and 30fps.
■ Intra frame period
Determine how often to plant an I frame. The shorter the duration, the more likely you will get a
better video quality, but at the cost of higher network bandwidth consumption. Select the intra frame
period from the following duration: 1/4 second, 1/2 second, 1 second, 2 seconds, 3 seconds and 4
seconds.
■ Video quality
A complex scene generally produces larger file size, meaning that higher bandwidth will be needed
for data transmission. Therefore, if Constant bit rate is selected, the bandwidth utilization is fixed at
a selected level, resulting in mutable video quality performances. The bit rates are selectable at the
following rates: 20Kbps, 30Kbps, 40Kbps, 50Kbps, 64Kbps, 128Kbps, 256Kbps, 512Kbps, 768Kbps,
1Mbps, 2Mbps, 3Mbps and 4Mbps.
On the other hand, if Fixed quality is selected, all frames are transmitted with the same quality;
bandwidth utilization is therefore unpredictable. The video qualities are selectable at the following
settings: Medium, Standard, Good, Detailed and Excellent.
If JPEG mode is selected, the Network Camera continuously sends JPEG images to the clients,
producing dynamic effects similar to movies. Every single JPEG image transmitted guarantees the same
image quality, which in turn comes at the expense of variable bandwidth usage. And because the media
contents are a combination of JPEG images, no audio data is transmitted to the clients.
■ Frame size
Select the video size. Note that a larger frame size takes up more bandwidth. The frame sizes are
selectable in the following resolutions: 176 x 144, 352 x 240 and 720 x 480.
User's Manual - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
■ Maximum frame rate
This limits the maximal refresh frame rate per second. Set the frame rate higher for a smoother video
quality.
If the power line frequency is set to 50Hz, the frame rates are selectable at the following rates: 1fps,
2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps and 25fps. If the power line frequency is set to 60Hz, the
frame rates are selectable at the following rates: 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps,
25fps and 30fps.
■ Video quality
The video qualities are selectable at the following settings: Medium, Standard, Good, Detailed and
Excellent.
Disable IR LED:
If you don’t want to let others know that the network camera is on, you can select this option to turn off
the LED illuminators. This will prevent the Network Camera’s operation from being noticed.
Audio settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note
that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio
transmission is enabled in the Client Settings page. In that case, the following message is displayed.
Input gain: There are two options for external microphone input gain, 0db and 20db.
Audio type: Select audio codec AAC or GSM-AMR and the bit rate.
■ AAC targets at performing good sound quality at the cost of higher bandwidth consumption. The bit
rates are selectable at the following rates: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps and128Kbps.
■ GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are
selectable at the following rates: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps,
10.2Kbps and 12.2Kbps.
When completed with the settings on this page, click Save to take effect.
44 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Motion detection
This section explains how to configure the Network Camera to enable motion detection. A total
of three motion detection windows can be configured.
IP7142(TCP-AV)
To enable motion detection, follow the steps below:
1. Click New to add a new motion detection window.
2. In the Window Name text box, enter a descriptive name for the motion detection window.
■ To move and resize the window, drag-drop the window.
■ To delete window, click X at top right of the window.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the
Sensitivity and Percentage slider bar.
4. Click Save to take effect.
5. Select Enable motion detection to enable this function.
For example:
IP7142(TCP-AV)
The Percentage Indicator will rise or fall depending on the image variation. When motions are
detected by the Network Camera and are judged to exceed the defined threshold, a red bar
rises. Meanwhile, the motion detection window will be outlined in red. Photos or videos can
be captured instantly and configured to send to the remote server (Email, FTP) by utilizing
this feature as a trigger source. For more information on how to plot an event, please refer to
Application on page 50.
User's Manual - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
A green bar indicates that even though motions are detected, the event will not be triggered
because the image variations are still falling under the defined threshold.
Percentage = 30%
NOTE
► How does motion detection work?
C
A
B
D
There are two parameters for setting the motion detection: Sensitivity and Percentage. In the
illustration above, frame A and frame B are two sequential images. Pixel differences between the
two frames are detected and highlighted in gray (frame C), and will be compared with the sensitivity
setting. Sensitivity is a value that expresses the sensitivity to moving objects. Higher sensitivity
settings are expected to sense a slight movement while smaller sensitivity settings tend to neglect
it. When the sensitivity is set to 70%, the Network Camera defines the pixels in the purple areas as
“alerted pixels” (frame D).
Percentage is a value that expresses the proportion of “alerted pixels” to all pixels in the motion
detection window. In this case, 50% of pixels are identified as “alerted pixels”. When the percentage is
set to 30%, the motions are judged to exceed the defined threshold; therefore, the motion window will
be outlined in red.
For applications that require higher security management, it is suggested to set higher sensitivity
settings and smaller percentage values.
46 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Camera control
This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by connecting with a
PTZ driver or scanner via RS485 interface.
RS485 Settings
Disable: Select this option to disable this function.
PTZ camera: Select this option to enable PTZ operation.
To utilize this feature, please connect the Network Camera with a PTZ driver or scanner via RS485
interface first. And then you can configure the PTZ driver and RS485 port settings in the following
diagram.
VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D protocol.
If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom camera
(scanner). please refer to the user’s manual of your PTZ scanner to set the Camera ID, PTZ driver, and
Port settings. The Camera ID is necessary for multiple cameras control. If you select PTZ camera and
click Save to enable this function, the camera control panel will be displayed in the main page as the
following diagram:
Network Camera
User's Manual - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Preset Position
Click Preset Position to open the Preset Position page. In this page, you can set the preset
position for the Network Camera. A total of 20 preset positions can be configured.
Follow the steps below to set preset positions:
1. Adjust the Network Camera to a desired position with the buttons on the right side of the window.
2. In the Preset position name text box, enter a descriptive name for the preset position. The preset
position name allows up to forty characters. Click Add to take effect. The preset position name will
appear in the Preset Positions drop-down list. To remove a preset position from the list, select a preset
position name from the Preset Positions drop-down list and then click Delete.
3. You can click “Go to” to aim at preset positions, which will also displayed in the main page.
4. Click Save to take effect.
Custom Command
If the Custom camera (scanner) is selected as the PTZ driver, the PTZ control panel on
the main page will not take effect. You need to configure command buttons to control the
PTZ scanner. Click Custom Command to open the Custom Command page. A total of
five command buttons can be configured. Please refer to the user's manual of your PTZ
scanner to enter the command in the following blanks.
Click Save to enable the settings and click Close to quit the page.
48 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
The command button will appear in the main page as the following diagram.
Network Camera
User's Manual - 49
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Application
This section explains how to configure the Network Camera to react in response to particular
situations. A typical application is that when a motion is detected, the Network Camera sends
buffered images to a FTP server or via e-mail as notifications.
In the illustation on the right side, an event
can be triggered by many sources, such
as motion detection or external digital
input devices. When an event is triggered,
you can specify what kind of action will be
performed. You can configure the Network
Camera to send snapshots or videos to your
email address or FTP site.
Action
Event Trigger
ex. Motion detection,
Periodically, Digital input,
System reboot
Media
Server
(what to send)
ex. Snapshot, Video Clips
(where to send)
ex. Email, FTP
To start plotting an event, it is suggested to configure server and media columns first so that the
Network Camera will know what action shall be performed when a trigger is activated.
Media Settings
In Media Settings column, click Add to open the media setting page. In this page, you can
specify what kind of media to send when a trigger is activated. A total of five media settings can
be configured.
50 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Media name: Enter a descriptive name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip, and System log.
Snapshot: Select to send snapshots when a trigger is activated.
■ Source: Select to take snapshots from stream 1 or stream 2.
■ Send pre-event images
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Specify to
capture how many images before a trigger is activated. Up to seven images can be generated.
■ Send post-event images
Specify to capture how many images after a trigger is activated. Up to seven images can be generated.
For example, if both the Send pre-event images and Send post-event images are set to seven, a total
of fifteen images are generated after a trigger is activated.
1 pic. 2 pic. 3 pic. 4 pic. 5 pic.
6 pic.
7 pic. 8 pic. 9 pic. 10 pic. 11 pic. 10 pic. 12 pic. 13 pic. 14 pic. 15 pic.
The moment the trigger
is activated.
■ File Name Prefix
Snapshot20080104_100341
Enter the text that will be put in front of the file name.
File name prefix
Date and time suffix
The format is: YYYYMMDD_HHMMSS
■ Add date and time suffix to the file name
Select this option to add date and time to the file name suffix.
For example:
Video Clip: Select to send video clips when a trigger is activated.
■ Source: Select to record video clips from stream 1 or stream 2.
■ Pre-event recording
The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Specify to record
video clips for how many seconds before a trigger is activated. Up to nine seconds can be set.
■ Maximum duration
Specify the maximal recording duration in seconds. Up to ten seconds can be set.
For example, if the Pre-event recording is set to five seconds and the Maximum duration is set to ten
seconds, the Network Camera continues to record for another four seconds after a trigger is activated.
1 sec. 2 sec. 3 sec. 4 sec. 5 sec. 6 sec. 7 sec. 8 sec. 9 sec. 10 sec.
The moment the trigger
is activated.
User's Manual - 51
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
■ Maximum file size
Video20080104_100341
Specify the maximal file size allowed.
■ File Name Prefix
File name prefix
Date and time suffix
The format is: YYYYMMDD_HHMMSS
Enter the text that will be put in front of the file name.
For example:
System log: Select to send a system log when a trigger is activated.
When completed, click Save to take effect and then click Close to quit this page. The new media name
will appear in the media drop-down list on the Application page as below. To remove a media setting
from the list, select a media name from the drop-down list and then click Delete. Note that only when the
media setting is not being applied to an event setting can it be deleted.
Server Settings
In the Server column, click Add to open the server setting page. In this page, you can specify
where the notification messages will be send when a trigger is activated. A total of five server
settings can be configured.
52 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Server name: Enter a descriptive name for the server setting.
Server Type: There are four choices of server types available: Email, FTP, HTTP, and Network storage.
Email: Select to send the media via Email when a trigger is activated.
■ Sender email address: Enter the email address of the sender.
■ Recipient email address: Enter the email address of the recipient.
■ Server address: Enter the domain name or IP address of the email server.
■ User name: Enter the user name of the email account.
■ Password: Enter the password of the email account.
To verify if the email settings are correctly configured, click Test. The result will be shown in a pop-up
window. If it works, you will also receive an email indicating the result.
FTP: Select to send the media to a FTP server when a trigger is activated.
■ Server address: Enter the domain name or IP address of the FTP server.
■ Server port
By default, the FTP port server is set to 21. Also, it can be assigned with another port number between
1025 and 65535.
■ User name: Enter the login name of the FTP account.
■ Password: Enter the password of the FTP account.
■ Remote folder name
Enter a folder to place the media file. If the folder name does not exist, the Network Camera will create
one on the FTP server.
■ Passive Mode
Most firewalls do not accept new connections initiated from external requests. If the FTP server
supports passive mode, select this option to enable passive mode FTP and allow data transmission to
pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a pop-up
window. If it works, you will also receive a test.txt file on the FTP server.
User's Manual - 53
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
HTTP: Select to send the media to a HTTP server when a trigger is activated.
■ URL: Enter the URL of the HTTP server.
■ User name: Enter the user name.
■ Password: Enter the password.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a pop-up
window. If it works, you will also receive a test.txt file on the HTTP server.
Network storage: Select to send the media to a network storage when a trigger is activated.
■ Network storage location: Enter the path of the network storage.
■ Workgroup: Enter the workgroup for network storage.
■ User name: Enter the user name.
■ Password: Enter the password.
To verify if the network storage settings are correctly configured, click Test. The result will be shown in a
pop-up window. If it works, you will also receive a test.txt file on the network storage server.
When completed, click Save to take effect and then click Close to quit this page. The new server name
will appear in the server drop-down list on the application page as below. To remove a server setting
from the list, select a server name from the drop-down list and then click Delete. Note that only when the
server setting is not being applied to an event setting can it be deleted.
54 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Event Settings
In the Event column, click Add to open the event setting page. In this page, you can arrange the
three elements -- Trigger, Schedule and Action to plot an event. A total of three event settings
can be configured.
Event name: Enter a descriptive name for the event setting.
Enable this event: Select this option to enable this event setting.
Priority: Select the relative importance of this event (High, Normal, and Low). Events with higher priority
setting will be executed first.
Detect next event after
motion is detected.
seconds: Enter the duration in seconds to pause motion detection after a
An event is an action initiated by user-defined trigger source; it is the causal arrangement of the
following three elements: Trigger, Event Schedule, and Action.
Trigger: Also referred as the cause or stimulus, defines when to trigger the Network Camera. The trigger
source can be configured to use the Network Camera’s built-in motion detection mechanism or external
digital input devices.There are four choices of trigger sources:
■ Video motion detection
Select this option to allow the Network Camera to use the built-in motion detection mechanism as
a trigger source. To enable this function, you need to configure Motion detection first. For more
information, please refer to Motion detection on page 45 for details.
■ Periodically
Select this option to allow the Network Camera to trigger periodically for every other defined minute. At
most 999 minutes can be set.
■ Digital input
Select one of the Digital inputs to allow the Network Camera to use external digital input device as a
trigger source. Depending on your applications, there are choices of digital input devices on the market
User's Manual - 55
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
which helps to sense any changes in temperature, vibration, sound and light, etc.
■ System boot
Select this option to allow the Network Camera to trigger when the power of Network Camera is
disconnected.
Event Schedule: The effective period in which the event stays active. Specify the effective period for the
event.
■ Select the days on weekly basis.
■ Select the time for recording in 24-hr time format.
Action: Also referred as the effect, defines the action to be performed by the Network Camera when the
trigger is activated. Select the action to perfom when a trigger is activated.
■ Trigger D/O for
seconds
Select this option to turn on external digital output device when a trigger is activated. Specify the length
of trigger interval in the text box.
Server name / Media name
■
Select the server and media name to allow the Network Camera to send the media files to the server
when a trigger is activated.
When completed, select Enable this event. Click Save to take effect and then click Close to quit this
page. The new event name will appear in the event drop-down list on the application page. To remove an
event setting from the list, select an event name from the drop-down list and then click Delete.
56 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Recording
This section explains how to configure the recording settings for the Network Camera.
Recording Settings
Click Add to open the recording setting page. In this page, you can define the recording source,
recording schedule and recording capacity. A total of two recording settings can be configured.
Recording name: Enter a descriptive name for the recording setting.
Enable this recording: Select this option to enable video recording.
Priority: Select the relative importance of this recording setting (High, Normal, and Low).
Source: Select the recording source (stream 1 or stream 2).
Recording Schedule: Specify the recording duration.
■ Select the days on weekly basis.
■ Select the time for recording in 24-hr time format.
User's Manual - 57
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Destination: Specify a storage destination for the recorded video files. Note that the destination field is
empty by default. Please go to Configuration > Application > Server Settings to set a Network storage
server; please refer to Server Settings on page 52.
Max. recording capacity: Please note that when the maximum capacity is reached, the oldest file will be
overwritten by the latest one.
File size for each recording: Specify the file size for each recording media.
File name prefix: Enter the text that will be put in front of the file name.
When completed, select Enable this recording. Click Save to take effect and then click Close to quit this
page. The new recording name will appear in the recording drop-down list on the recording page. To
remove a recording setting from the list, select a recording name from the drop-down list then and click
Delete.
58 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
System log
This section explains how to configure the Network Camera to send system log to remote server
as a backup. It is composed of the following two columns: Remote Log and Current Log.
Remote Log
You can configure the Network Camera to send the system log file to a remote server as a log
backup. Before utilizing this feature, it is suggested to install a log-recording tool to receive
system log messages from the Network Camera. For example, a tool -- Kiwi Syslog Daemon.
Follow the steps below to set up the remote log:
1. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3. When completed, select Enable remote log and click Save to take effect.
Current Log
This column displays the system’s log in chronological order. The system log is stored in the
Network Camera’s buffer area and will be overwritten when reaching a certain amount.
User's Manual - 59
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
View parameters
The View parameters page lists the entire system’s parameters in alphabetical order. If you
need technical assistance, please provide the information listed in this page.
60 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Maintenance
This chapter explains how to restore the Network Camera to factory default, upgrade firmware
version, etc.
Reboot
This feature allows you to turn off and then turn on the Network Camera. It takes about one ~
two minutes to complete the process. When completed, the live video will be displayed in your
browser. The following message is displayed during the rebooting process.
If the connection fails after rebooting, manually enter the IP address of the Network Camera in
the address field to resume the connection.
Restore
This feature allows you to restore the Network Camera to factory default. Two settings can be
excluded:
Network Type: Select this option to retain the Network Type settings (please refer to Network Type on
page 28).
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings (please refer to
System on page 22)
If none of the options is selected, all settings will be restored to factory default.
The following message is displayed during the restoring process.
User's Manual - 61
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Upload / Export Daylight Saving Time Configuration File
This feature allows you to set the starting time and ending time of DST.
Follow the steps below to set up:
1. In the Export Daylight Saving Time Configuration File Column, click Export to export an Extensible
Markup Language (*.xml) file from the Network Camera.
2. Open the XML file using Microsoft® Notepad and locate your time zone; set the starting time and
ending time of the DST. When completed, save the file.
In the example below, the DST begins each year at 2:00 a.m. on the second Sunday in March and
ends at 2:00 a.m. on the first Sunday in November.
62 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
3. In the Upload Column, click Browse… and specify the XML file.
If the incorrect date and time is assigned, you will see the following warning message when uploading
the file to the Network Camera.
4. Click Upload. To enable the DST, see System Time on page 22.
The following message is displayed when attempting to upload an incorrect file format.
Upgrade Firmware
This feature allows you to upgrade the firmware on your Network Camera. It takes about five
minutes to complete the process.
Note that do not power off the Network Camera during the upgrade.
Follow the steps below to upgrade firmware:
1. Download a new firmware file from VIVOTEK website. The file is in pkg file format.
2. Click Browse… and specify the firmware file.
3. Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade
completes.
User's Manual - 63
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
The upgrade is successful as you see “Reboot system now!! This connection will close”. After
that, re-access the Network Camera.
The following message is displayed when the upgrade is succeeded.
The following message is displayed when you have selected an incorrect firmware file.
Starting firmware upgrade...
Do not power down the server during the upgrade.
The server will restart automatically after the upgrade is
completed.
It will takes about 1 - 5 minutes.
Wrong PKG file format
Unpack fail
64 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Appendix
URL Commands of the Network Camera
Overview
For some customers who already have their own web site or web control application, Network Camera/
Video server can be easily integrated through convenient URLs. This section specifies the external HTTP
based application programming interface. The HTTP based camera interface provides the functionality
to request a single image, to control camera functions (PTZ, output relay etc.) and to get and set internal
parameter values. The image and CGI-requests are handled by the built in Web server.
Style convention
In URL syntax and in descriptions of CGI parameters, a text within angle brackets denotes a content
that is to be replaced with either a value or a string. When replacing the text string also the angle
brackets shall be replaced. An example of this is the description of the name for the server, denoted with
<servername> in the URL syntax description below, that is replaced with the string myserver in the URL
syntax example, also below.
URL syntax' are written with the “Syntax:" word written in bold face followed by a box with the referred
syntax as seen below. The name of the server is written as <servername>. This is intended to be
replaced with the name of the actual server. This can either be a name, e.g., "mywebcam" or "thecam.
adomain.net" or the associated IP number for the server, e.g., 192.168.0.220.
Syntax:
Description of returned data is written with "Return:" in bold face followed by the returned data in a box. All data
returned as HTTP formatted, i.e., starting with the string HTTP is line separated with a Carriage Return and Line
Feed (CRLF) printed as \r\n.
Return:
HTTP/1.0 <HTTP code> <HTTP text>\r\n
URL syntax examples are written with "Example:" in bold face followed by a short description and a light grey box
with the example.
Example: request a single snapshot image
User's Manual - 65
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
General CGI URL syntax and parameters
CGI parameters are written in lower-case and as one word without any underscores or other separators. When
the CGI request includes internal camera parameters, the internal parameters must be written exactly as they
are named in the camera or video server. The CGIs are organized in function related directories under the cgi-bin
directory. The file extension of the CGI is required.
Syntax:
http://<servername>/cgi-bin/<subdir>[/<subdir>...]/<cgi>.<ext>[?<parameter>=<value>[&<parameter>=<value>...]]
Example: Setting digital output #1 to active
Security level
SECURITY LEVEL
0
SUB-DIRECTORY
anonymous
anonymous, viewer, dido,
camctrl
anonymous, viewer, dido,
camctrl, operator
anonymous, viewer, dido,
camctrl, operator, admin
DESCRIPTION
Unprotected.
1. Can view, listen, talk to camera
2. Can control dido, ptz of camera
Operator’s access right can modify most of camera’s
parameters except some privilege and network options
Administrator’s access right can fully control the camera’s
operation.
1 [view]
4 [operator]
6 [admin]
7
Internal parameters. Unable to be changed by any external
interface.
N/A
Get server parameter values
Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
where the <parameter> should be <group>[_<name>] or <group>[.<name>] If you do not specify the any
parameters, all the parameters on the server will be returned. If you specify only <group>, the parameters of related
group will be returned.
66 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
When query parameter values, the current parameter value are returned.
Successful control request returns parameter pairs as follows.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
<length> is the actual length of content.
Example: request IP address and it’s response
Request:
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
Set server parameter values
Note: The access right depends on the URL directory.
Method: GET/POST
Syntax:
[&update=<value>][&return=<return page>]
[&update=<value>] [&return=<return page>]
[&update=<value>] [&return=<return page>]
[&update=<value>] [&return=<return page>]
User's Manual - 67
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Parameter
<group>_<name>
Value
value to assigned
Description
Assign <value> to the parameter <group>_<name>
Set to 1 to actually update all fields (no need to use update
parameter in each group)
update
<boolean>
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according the current path. If you omit this
parameter, it will redirect to an empty page.
return
<return page>
(note: The return page can be a general HTML file(.htm,
.html) or a VIVOTEK server script executable (.vspx) file.
It can not be a CGI command. It can not have any extra
parameters. This parameter must be put at end of parameter
list)
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: <length>\r\n
\r\n
<parameter pair>
where <parameter pair> is
<parameter>=<value>\r\n
[<parameter pair>]
Only the parameters that you set and readable will be returned.
Example: Set the IP address of server to 192.168.0.123
Request:
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n
68 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Available parameters on the server
Valid values:
Valid values
string[<n>]
password[<n>]
integer
positive integer
<m> ~ <n>
Description
Text string shorter than ‘n’ characters. The characters “,’, <,>,& are invalid.
The same as string but display ‘*’ instead
Any number between (-231 – 1) and (231 – 1)
Any number between 0 and (232 – 1)
Any number between ‘m’ and ‘n’
domain name[<n>]
A string limited to contain a domain name shorter than ‘n’ characters (eg. www.ibm.com)
com)
email address [<n>]
ip address
mac address
boolean
A string limited to contain an ip address (eg. 192.168.1.1)
A string limited to contain mac address without hyphen or colon connected
A boolean value 1 or 0 represents [Yes or No], [True or False], [Enable or Disable].
<value1>,
<value2>,
<value3>,
...
blank
everything inside <>
Enumeration. Only given values are valid.
A blank string
As description
Note: The Network Camera should prevent to restart when parameter changed.
Group: system
Security
Name
date
Value
Description
(get/set)
<yyyy/mm/dd>,
keep, auto
<hh:mm:ss>,
keep, auto
Current date of system. Set to ‘keep’ keeping date
unchanged. Set to ‘auto’ to use NTP to synchronize date.
Current date of system. Set to ‘keep’ keeping date
unchanged. Set to ‘auto’ to use NTP to synchronize time.
6/6
time
6/6
6/6
<domain name>,
<ip address>,
<blank>
NTP server
ntp
*Do not use “skip to invoke default server” for default
User's Manual - 69
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Indicate timezone and area
-480: GMT-12:00 Eniwetok, Kwajalein
-440: GMT-11:00 Midway Island, Samoa
-400: GMT-10:00 Hawaii
-360: GMT-09:00 Alaska
-320: GMT-08:00 Las Vegas, San_Francisco, Vancouver
-280: GMT-07:00 Mountain Time, Denver
-281: GMT-07:00 Arizona
-240: GMT-06:00 Central America, Central Time, Mexico City,
Saskatchewan
-200: GMT-05:00 Eastern Time, New York, Toronto
-201: GMT-05:00 Bogota, Lima, Quito, Indiana
-160: GMT-04:00 Atlantic Time, Canada, Caracas, La Paz,
Santiago
-140: GMT-03:30 Newfoundland
-120: GMT-03:00 Brasilia, Buenos Aires, Georgetown, Greenland
-80: GMT-02:00 Mid-Atlantic
-40: GMT-01:00 Azores, Cape_Verde_IS.
0: GMT Casablanca, Greenwich Mean Time:Dublin, Edinburgh,
Lisbon, London
40: GMT 01:00 Amsterdam, Berlin, Rome, Stockholm, Vienna,
Madrid, Paris
41: GMT 01:00 Warsaw, Budapest, Bern
80: GMT 02:00 Athens, Helsinki, Istanbul, Riga
81: GMT 02:00 Cairo
-489 ~ 529
timezoneindex
6/6
82: GMT 02:00 Lebanon, Minsk
83: GMT 02:00 Israel
120: GMT 03:00 Baghdad, Kuwait, Riyadh, Moscow, St.
Petersburg, Nairobi
121: GMT 03:00 Iraq
140: GMT 03:30 Tehran
160: GMT 04:00 Abu Dhabi, Muscat, Baku, Tbilisi, Yerevan
180: GMT 04:30 Kabul
200: GMT 05:00 Ekaterinburg, Islamabad, Karachi, Tashkent
220: GMT 05:30 Calcutta, Chennai, Mumbai, New Delhi
230: GMT 05:45 Kathmandu
240: GMT 06:00 Almaty, Novosibirsk, Astana, Dhaka, Sri
Jayawardenepura
260: GMT 06:30 Rangoon
280: GMT 07:00 Bangkok, Hanoi, Jakarta, Krasnoyarsk
320: GMT 08:00 Beijing, Chongging, Hong Kong, Kuala Lumpur,
Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo, Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra, Melbourne, Sydney, Guam,
Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji, Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
70 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
daylight_enable <boolean>
6/6
Enable automatic daylight saving to time zone
Check if current time is under daylight saving time.
daylight_
dstactualmode
<boolean>
6/7
6/7
6/7
daylight_auto_
string[19]
Display the current daylight saving begin time.
Display the current daylight saving end time.
begintime
daylight_auto_
string[19]
endtime
0,
3600,
0 to Disable automatic time adjustment, otherwise, it means
the seconds between NTP automatic update interval.
updateinterval
86400,
6/6
604800,
2592000
SubGroup of system: info (The fields in this group are unchangeable.)
Security
(get/set)
0/7
Name
Value
Description
modelname
string[40]
Model name of server
serialnumber
<mac address> 0/7
12 characters mac address without hyphen connected
The version of firmware, including model, company, and version
number in the format.
firmwareversion string[40]
0/7
0/7
0/7
language_count <integer>
Number of webpage language available on the server
language_i
string[16]
Available language lists
<0~(count-1)>
Group: status
Security
Name
Value
Description
(get/set)
0 => actual color
1 => not actual color
videoinactualcolor <boolean>
1/4
0 => Inactive, normal
1 => Active, triggered
0 => Inactive, normal
1 => Active, triggered
Current RTSP connection numbers
di_i<0~(ndi-1)>
do_i<0~ndi-1)>
<boolean>
1/7
<boolean>
integer
1/7
6/7
6/7
onlinenum_rtsp
onlinenum_
httppush
integer
Current HTTP push server connection numbers
Group: di_i<0~(ndi-1)>
Security
(get/set)
Name
Value
Description
high,
low
Indicate whether open circuit or closed circuit represents inactive
status
normalstate
1/1
Group: do_i<0~(ndo-1)>
Security
(get/set)
Name
Value
Description
open,
grounded
Indicate whether open circuit or closed circuit represents inactive
status
normalstate
1/1
User's Manual - 71
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Group: security
Security
Name
Value
Description
(get/set)
6/7
user_i0_name
user_i<1~20>
_name
user_i0_pass
user_i<1~20>
_pass
string[64]
User’s name of root
User’s name
string[64]
6/7
6/6
7/6
6/7
password [64]
password [64]
Root’s password
User’s password
Root’s privilege
user_i0_privilege admin
user_i<1~20>
_ privilege
viewer,
operator,
admin
6/6
User’s privilege
Group: network
Security
(get/set)
Name
type
Value
Description
lan,
pppoe
6/6
Network connection type
1 => get ipaddress, subnet, router, dns1, dns2 from DHCP server at
resetip
<boolean>
6/6
next reboot
0 => use preset ipaddress, subnet, rounter, dns1, and dns2
IP address of server
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server
Primary WINS server
Secondary WINS server
ipaddress
subnet
router
dns1
dns2
wins1
wins2
<ip address>
<ip address>
<ip address>
<ip address>
<ip address>
<ip address>
<ip address>
6/6
6/6
6/6
6/6
6/6
6/6
6/6
Subgroup of network: ftp
Security
(get/set)
Name
port
Value
Description
21,
6/6
Local ftp server port
1025~65535
Subgroup of network: http
Security
(get/set)
Name
Value
Description
80,
port
6/6
6/6
1/6
HTTP port
1025~65535
1025~65535
basic,
alternateport
authmode
Alternative HTTP port
HTTP authentication mode
digest
s0_accessname string[32]
s1_accessname string[32]
1/6
1/6
Http server push access name for stream 1
Http server push access name for stream 2
72 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Subgroup of network: https
Security
Name
port
Value
Description
(get/set)
443,
1025~65535
6/6
https port
Subgroup of network: rtsp
Security
(get/set)
Name
port
Value
Description
RTSP port
554,
6/6
1025 ~ 65535
disable,
basic,
authmode
1/6
RTSP authentication mode
digest
s0_accessname string[32]
s1_accessname string[32]
1/6
1/6
RTSP access name for stream 1
RTSP access name for stream 2
The current audio track for stream1.
-1 => audio mute
s0_audiotrack
<integer>
6/6
The current audio track for stream2.
-1 => audio mute
s1_audiotrack
<integer>
6/6
Subgroup of rtsp_s<0~(n-1)>: multicast, n is stream count
Security
Name
Value
Description
(get/set)
4/4
alwaysmulticast <boolean>
Enable always multicast
Multicast IP address
Multicast video port
Multicast audio port
Mutlicast time to live value
ipaddress
videoport
audioport
ttl
<ip address>
1025 ~ 65535
1025 ~ 65535
1 ~ 255
4/4
4/4
4/4
4/4
Subgroup of network: sip
Security
(get/set)
Name
port
Value
Description
SIP port
5060,
1025 ~ 65535
6/6
Subgroup of network: rtp
Security
(get/set)
6/6
Name
Value
Description
videoport
audioport
1025 ~ 65535
1025 ~ 65535
Video channel port for RTP
Audio channel port for RTP
6/6
Subgroup of network: pppoe
Security
(get/set)
6/6
Name
Value
Description
user
pass
string[128]
password[64]
PPPoE account user name
PPPoE account password
6/6
User's Manual - 73
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Group: ipfilter
Security
(get/set)
Name
Value
Description
allow_i<0~9>
_start
allow_i<0~9>
_end
deny_i<0~9>
_start
deny_i<0~9>
_end
1.0.0.0 ~
6/6
Allowed starting IP address for RTSP connection
Allowed ending IP address for RTSP connection
Denied starting IP address for RTSP connection
Denied ending IP address for RTSP connection
255.255.255.255
1.0.0.0 ~
6/6
6/6
6/6
255.255.255.255
1.0.0.0 ~
255.255.255.255
1.0.0.0 ~
255.255.255.255
Group: videoin
Security
(get/set)
4/4
Name
Value
Description
cmosfreq
50, 60
CMOS frequency
auto => auto white balance
keep current value => keep current value
fluorescent => 5500K
auto,
keep current
value
whitebalance
4/4
outdoor => > 5500K
atwbvalue1
atwbvalue2
exposurelevel
autoiris
enablewdr
agc
0 ~ 9999999999 4/4
0 ~ 9999999999 4/4
The auto white balance value 1.
The auto white balance value 2.
exposure level
Enable auto Iris
Enable wide dynamic range
Set auto gain control
1~8
4/4
4/4
4/4
4/4
<boolean>
<boolean>
0~2
auto, schedule,
daynight
4/4
4/4
set IR cut filter mode
on, off
bwlowluxmode <boolean>
Turn on or off black/white video in low lux mode
Group: videoin_c<0~(n-1)> for n channel products, m is stream number
Security
Name
color
Value
Description
(get/set)
0,
1
0 => monochrome
1 => color
4/4
flip
mirror
<boolean>
<boolean>
4/4
4/4
Flip the image
Mirror the image
An 32-bits integer, each bit can be set separately as follows:
Bit 0 => Support Network Camera control function. 0(not support),
1(support)
Bit 1 => Build-in or external Network Camera. 0(external), 1(build-
in)
ptzstatus
<integer>
1/7
Bit 2 => Support pan operation. 0(not support), 1(support)
Bit 3 => Support tilt operation. 0(not support), 1(support)
Bit 4 => Support zoom operation. 0(not support), 1(support)
Bit 5 => Support focus operation. 0(not support), 1(support)
Enclosed caption
Overlay time stamp on video
Maximum exposure time
text
string[16]
4/4
4/4
4/4
imprinttimestamp <boolean>
maxexposure
1~120
Video codec type
s<0~(m-1)>_
codectype
mpeg4,
mjpeg
4/4
mpeg4 => MPEG-4
mjpeg => JPEG
74 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Video resolution in pixel
176x144 => 176x144
176x144,
352x240,
720x480
s<0~(m-1)>_
resolution
4/4
352x240 => 352x240
720x480 => 720x480
The period of intra frame in milliseconds
250 => 1/4 S
250,
500,
1000,
2000,
3000,
4000,
s<0~(m-1)>_
mpeg4_
intraperiod
500 => 1/2 S
4/4
4/4
4/4
1000 =>1 S
2000 => 2 S
3000 => 3 S
4000 => 4 S
s<0~(m-1)>_
mpeg4_
ratecontrolmode
cbr,
vbr
cbr => constant bitrate
vbr => fix quality
Quality of video when choosing vbr in “ratecontrolmode”. 1 is worst
1,
2,
3,
4,
5
quality and 5 is the best quality.
1 => medium
s<0~(m-1)>_
mpeg4_quant
2 => standard
3 => good
4 => detailed
5 => excellent
20000,
Set bit rate in bps when choose cbr in “ratecontrolmode”.
20000 => 20 Kbps
30000,
40000,
30000 => 30 Kbps
50000,
40000 => 40 Kbps
64000,
50000 => 50 Kbps
128000,
256000,
384000,
512000,
768000,
1000000,
1200000,
1500000,
2000000,
3000000,
4000000
64000 => 64 Kbps
128000 => 128 Kbps
256000 => 256 Kbps
512000 => 512 Kbps
768000 => 768 Kbps
1000000 => 1 Mbps
s<0~(m-1)>_
mpeg4_bitrate
4/4
1500000 => 1.5 Mbps
2000000 => 2 Mbps
3000000 => 3 Mbps
4000000 => 4 Mbps
Set maximum frame rate in fps (for MPEG-4).
1,
1 => 1 fps
2,
2 => 2 fps
3,
3 => 3 fps
s<0~(m-1)>_
mpeg4_
maxframe
5,
5 => 5 fps
10,
4/4
4/4
8 => 8 fps
15,
10 => 10 fps
20,
15 => 15 fps
25,
20 => 20 fps
30 (only for 60Hz)
25 => 25 fps
30 => 30 fps (only for 60Hz)
Quality of jpeg video. 1 is worst quality and 5 is the best quality.
1,
2,
3,
4,
5
1 => medium
2 => standard
3 => good
4 => detailed
5 => excellent
s<0~(m-1)>_
mjpeg_quant
User's Manual - 75
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Set maximum frame rate in fps (for JPEG).
1,
1 => 1 fps
2,
2 => 2 fps
3,
3 => 3 fps
s<0~(m-1)>_
mjpeg_
maxframe
5,
5 => 5 fps
10,
4/4
8 => 8 fps
15,
10 => 10 fps
15 => 15 fps
20 => 20 fps
25 => 25 fps
30 => 30 fps (only for 60Hz)
20,
25,
30 (only for 60Hz)
Group: audioin_c<0~ (n-1)> for n channel products
Security
(get/set)
Name
Value
Description
micin,
linein
micin => use external microphone input
linein => use line input, i.e. internal microphone
Enable audio mute
0 => Disable
source
4/4
0,
1
mute
4/4
4/4
4/4
1 => Enable
Gain of input
31 => +12 dB
30 => +10.5 dB
29 => +9 dB
28 => +7.5 dB
27 => +6 dB
26 => +4.5 dB
25 => +3 dB
24 => +1.5 dB
23 => 0 dB
22 => -1.5 dB
21 => -3 dB
20 => -4.5 dB
19 => -6 dB
18 => -7.5 dB
17 => -9 dB
gain
0~31
16 => -10.5 dB
15 => -12 dB
14 => -13.5 dB
13 => -15 dB
12 => -16.5 dB
11 => -18 dB
10 => -19.5 dB
9 => -21 dB
8 => -22.5 dB
7 => -24 dB
6 => -25.5 dB
5 => -27 dB
4 => -28.5 dB
3 => -30 dB
2 => -31.5 dB
1 => >-33 dB
0 => -34.5 dB
Set audio codec type for input
s<0~(m-1)>_
codectype
aac4,
gamr
aac4 => AAC
gamr => GSM-AMR
76 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Set AAC4 bitrate in bps
16000 => 16 Kbps
32000 => 32 Kbps
16000,
32000,
48000,
64000,
96000
s<0~(m-1)>_
aac4_bitrate
4/4
48000 => 48 Kbps
64000 => 64 Kbps
96000 => 96 Kbps
128000 => 128 Kbps
Set AMR bitrate in bps
4750 => 4.75 Kbps
5150 => 5.15 Kbps
5900 => 5.90 Kbps
6700 => 6.7 Kbps
7400 => 7.4 Kbps
7950 => 7.95 Kbps
10200 => 10.2 Kbps
12200 => 12.2 Kbps
128000
4750,
5150,
5900,
6700,
7400,
7950,
10200,
12200
s<0~(m-1)>_
gamr_bitrate
4/4
Group: image_c<0~(n-1)> for n channel products
Security
Name
Value
Description
(get/set)
4/4
brightness
saturation
contrast
hue
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
Adjust brightness of image according to mode settings.
saturation
of image according to mode settings.
4/4
4/4
4/4
Adjust
Adjust contrast of image according to mode settings.
Adjust hue of image according to mode settings.
Group: imagepreview_c<0~(n-1)> for n channel products
Security
Name
Value
-5 ~ 5
Description
(get/set)
Preview of adjusting brightness of image according to mode
settings.
brightness
4/4
saturation
contrast
hue
videoin_
whitebalance
videoin_
restoreatwb
-5 ~ 5
-5 ~ 5
-5 ~ 5
auto,
4/4
4/4
4/4
Preview of adjusting saturation of image according to mode settings.
Preview of adjusting contrast of image according to mode settings.
Preview of adjusting hue of image according to mode settings.
Preview of adjusting white balance of image according to mode
settings.
4/4
manual
Positive integer 4/4
Restore auto white balance.
Group: motion_c<0~(n-1)> for n channel product
Security
Name
Value
Description
(get/set)
4/4
enable
win_i<0~2>_
enable
<boolean>
<boolean>
Enable motion detection
Enable motion window 1~3
4/4
win_i <0~2>_
name
win_i <0~2>_left 0 ~ 320
win_i <0~2>_top 0 ~ 240
string[14]
4/4
Name of motion window 1~3
4/4
4/4
Left coordinate of window position.
Top coordinate of window position.
win_i <0~2>_
width
0 ~ 320
4/4
Width of motion detection window.
User's Manual - 77
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
win_i<0~2>_
0 ~ 240
0 ~ 100
0 ~ 100
4/4
4/4
4/4
Height of motion detection window.
Percent of motion detection window.
Sensitivity of motion detection window.
height
win_i<0~2>_
objsize
win_i<0~2>_
sensitivity
Group: ddns
Security
(get/set)
6/6
Name
Value
Description
enable
<boolean>
Safe100,
Enable or disable the dynamic dns.
Safe100 => safe100.net
DyndnsDynamic,
DyndnsCustom,
TZO,
DyndnsDynamic => dyndns.org (dynamic)
DyndnsCustom => dyndns.org (custom)
TZO => tzo.com
provider
6/6
DHS,
DHS => dhs.org
DynInterfree,
CustomSafe100
DynInterfree =>dyn-interfree.it
CustomSafe100 =>Custom server using safe100 method
<provider>_
hostname
string[128]
string[64]
string[64]
string[128]
6/6
6/6
6/6
6/6
Your dynamic hostname.
<provider>_
usernameemail
<provider>_
passwordkey
<provider>_
servername
Your user or email to login ddns service provider
Your password or key to login ddns service provider
The server name for safe100. (This field only exists for provider is
customsafe100)
Group: upnppresentation
Security
(get/set)
6/6
Name
Value
Description
enable
<boolean>
Enable or disable the UPNP presentation service.
Group: upnpportforwarding
Security
(get/set)
6/6
Name
Value
Description
enable
<boolean>
Enable or disable the UPNP port forwarding service.
The status of UpnP port forwarding, used internally.
0 => OK
upnpnatstatus
0~3
6/7
1 => FAIL
2 => no IGD router
3 => no need to do port forwarding
Group: syslog
Security
(get/set)
6/6
Name
Value
Description
enableremotelog <boolean>
serverip
Enable remote log
Log server IP address
<IP address>
514,
1025~65535
6/6
serverport
6/6
Server port used for log
78 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
The levels to distinguish the importance of information.
0 => LOG_EMERG
1 => LOG_ALERT
2 => LOG_CRIT
3 => LOG_ERR
level
0~7
6/6
4 => LOG_WARNING
5 => LOG_NOTICE
6 => LOG_INFO
7 => LOG_DEBUG
Group: camctrl_c<0~(n-1)> for n channel product
Security
Name
Value
Description
(get/set)
1/4
panspeed
tiltspeed
-5 ~ 5
-5 ~ 5
Pan speed -5 ~ 5
Tilt speed -5 ~ 5
1/4
zoomspeed
autospeed
focusspeed
dwelling
axisx
axisy
pantilt_port
pantilt_camid
zoom_port
zoom_camid
preset_i<0~19>_
name
-5 ~ 5
1 ~ 5
-5 ~ 5
0 ~ 9999
-8250~ 8250
-560 ~ 1664
<integer>
0 ~ 255
<integer>
0 ~ 255
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
Zoom speed -3 ~ +3
Auto pan/patrol speed 1 ~ 5
Auto focus speed
Time to dwelling when patrol
Axis X coordinate, used internally
Axis Y coordinate, used internally
The pan and tilt channel.
ID of camera on pan/tilt channel.
The zoom channel.
1/4
1/4
ID of camera on zoom channel.
string[40]
1/4
1/4
1/4
The name of preset location.
The dwelling time of each preset location
Select correspond uart
preset_i<0~19>_
dwelling
0 ~ 255
0 ~ (m-1), m is
uart count
0~255
uart
cameraid
isptz
disablemdonptz <boolean>
1/4
1/7
1/4
Camera ID to control external PTZ cameral
To distinguish the video channel if mapping to a PTZ camera
Disable motion detection on PTZ operation
<boolean>
Group: uart
Security
(get/set)
Name
Value
Description
ptzdrivers_
i<0~19, 127>_
name
string[40]
1/4
The name of the PTZ driver.
ptzdrivers_
i<0~19, 127>_
location
string[128]
1/4
4/4
The full path of the PTZ driver.
enablehttptunnel <boolean>
Enable HTTP tunnel channel to control UART.
User's Manual - 79
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Group: uart_i<0~(n-1)> n is uart port count
Security
(get/set)
Name
Value
Description
Set baud rate of COM port
110 => 110
110
300
300 => 300
600
600 => 600
1200
2400
3600
4800
7200
9600
19200
38400
57600
115200
1200 => 1200
2400 => 2400
3600 => 3600
4800 => 4800
7200 => 7200
9600 => 9600
19200 => 19200
38400 => 38400
57600 => 57600
115200 => 115200
Data bits in a character frame
5 => 5
baudrate
4/4
5
6
7
8
databit
4/4
6 => 6
7 => 7
8 => 8
For error checking
none => none
odd => odd
none
odd
even
paritybit
4/4
4/4
even => eve
1 => 1
1
2
stopbit
2 => 2
rs485
rs232
<boolean>
uartmode
4/4
4/4
1/4
rs485 or rs232
uartreset
customdrvcmd_i
<0~9>
speedlink_i
<0~4>_name
speedlink_i
<0~4>_cmd
Set this flag to true to apply change of UART configuration.
PTZ command for custom camera.
string[128]
string[40]
string[128]
1/4
1/4
Additional PTZ command name
Additional PTZ command list
0~19
127 (custom)
128 (no driver)
ptzdriver
4/4
Which PTZ driver is used by this COM port
Group: privacymask_c<0~(n-1)> for n channel product
Security
Name
Value
Description
(get/set)
4/4
enable
win_i<0~4>_
enable
<boolean>
<boolean>
Enable the privacy mask
Enable the privacy mask window
4/4
win_i<0~4>_
name
win_i<0~4>_left 0 ~ 320/352
win_i<0~4>_top 0 ~ 240/288
string[14]
4/4
The name of privacy mask window
4/4
4/4
Left coordinate of window position.
Top coordinate of window position.
win_i<0~4>_
0 ~ 320/352
width
4/4
Width of privacy mask window
win_i<0~4>_
0 ~ 240/288
height
4/4
Height of privacy mask window
80 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Group: capability
Security
(get/set)
Name
Value
Description
api_http_version 0200a
0/7
The HTTP API version.
The server bootup time
bootuptime
<positive integer> 0/7
0,
nir
0/7
Number of IR interface
Number of digital input
Number of digital output
Number of audio input
Number of audio output
<positive integer>
0,
ndi
0/7
<positive integer>
0,
ndo
0/7
<positive integer>
0,
naudioin
naudioout
0/7
<positive integer>
0,
0/7
<positive integer>
nvideoin
<positive integer> 0/7
<positive integer> 0/7
<positive integer> 0/7
<positive integer> 0/7
Number of video input
nmediastream
nvideosetting
naudiosetting
Number of media stream per channel
Number of video settings per channel
Number of audio settings per channel
0,
nuart
0/7
Number of UART interface
<positive integer>
An 32-bits integer, each bit can be set separately as follows:
Bit 0 => Support Network Camera control function
0(not support), 1(support)
Bit 1 => Build-in or external Network Camera.
0(external), 1(build-in)
ptzenabled
<positive integer> 0/7
Bit 2 => Support pan operation. 0(not support), 1(support)
Bit 3 => Support tilt operation. 0(not support), 1(support)
Bit 4 => Support zoom operation. 0(not support), 1(support)
Bit 5 => Support focus operation. 0(not support), 1(support)
Indicate whether to support http over SSL
Indicate whether to support rtsp
protocol_https
protocol_rtsp
protocol_sip
protocol_
<boolean>
<boolean >
<boolean>
0/7
0/7
0/7
Indicate whether to support sip
<positive integer> 0/7
The maximum allowed simultaneous connections
maxconnection
protocol_
rtp_multicast_
scalable
protocol_
rtp_multicast_
scalable
<boolean>
<boolean>
<boolean>
0/7
0/7
0/7
Indicate whether to support scalable multicast
Indicate whether to support scalable multicast
Indicate whether to support backchannel multicast
protocol_rtp_
multicast_
backchannel
protocol_rtp_tcp <boolean>
protocol_rtp_http <boolean>
0/7
0/7
Indicate whether to support rtp over tcp
Indicate whether to support rtp over http
protocol_spush_
<boolean>
mjpeg
0/7
0/7
Indicate whether to support server push motion jpeg
protocol_snmp <boolean>
0,
Indicate whether to support snmp
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
videoin_type
1,
2
0/7
<a list of the
available
resolution
separates by
comma>
videoin_
resolution
0/7
Available resolutions list
User's Manual - 81
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
<a list of the
available codec
videoin_codec
videoout_codec
0/7
0/7
Available codec list
Available codec list
types separaters
by comma>
<a list of the
available codec
types separaters
by comma>
<boolean>
audio_aec
0/7
0/7
0/7
0/7
Indicate whether to support acoustic echo cancellation
Indicate whether to support external microphone input
Indicate whether to support external line input
Indicate whether to support line output
audio_extmic
audio_linein
audio_lineout
audio_
<boolean>
<boolean>
<boolean>
<boolean>
0/7
Indicate whether to support headphone output
headphoneout
<a list of the
available codec
types separaters
by comma>
audioin_codec
audioout_codec
0/7
Available codec list
<a list of the
available codec
types separaters
by comma>
0/7
Available codec list
uart_httptunnel <boolean>
0/7
0/7
Indicate whether to support the http tunnel for uart transfer
Indicate what kind of transmission mode the machine used. TX:
server, Rx: receiver box
transmission_
Tx, Rx
mode
network_wire
network_wireless <boolean>
<boolean>
0/7
0/7
Indicate whether to support the Ethernet
Indicate whether to support the wireless
wireless_
<boolean>
802dot11b
wireless_
<boolean>
802dot11g
0/7
0/7
0/7
0/7
0/7
Indicate whether to support the wireless 802.11b+
Indicate whether to support the wireless 802.11g
Indicate whether to support the wireless WEP
Indicate whether to support the wireless WPA
Indicate whether to support the wireless WPA2
wireless_
<boolean>
encrypt_wep
wireless_
encrypt_wpa
<boolean>
wireless_encrypt
<boolean>
_wpa2
Group: event_i<0~2>
Security
(get/set)
6/6
Name
name
Value
Description
string[40]
The identification of this entry
To enable or disable this event.
0 => Disable
0,
1
enable
6/6
1 => Enable
Indicate the priority of this event.
0 => indicates low priority.
1 => indicates normal priority.
2 => indicates high priority.
Delay seconds before detect next event.
0,
1,
2
priority
delay
6/6
6/6
1~999
82 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Indicate the trigger condition.
boot => system boot.
di => digital input.
boot,
di,
trigger
di
6/6
motion,
seq
motion => video motion detection.
seq => periodic condition.
visignal => indicates video input signal loss.
Indicate which di detected.
<integer>
6/6
This field is required when trigger condition is “di”.
One bit represents one digital input. The LSB indicates DI 0.
Indicate which motion detection windows detected.
This field is required when trigger condition is “md”.
One bit represents one window.
The LSB indicates the 1st window.
For example, to detect the 1st and 3rd windows, set mdwin as 5.
Interval of period snapshot in minute. This field is used when trigger
condition is “seq”.
mdwin
inter
<integer>
1~999
6/6
6/6
Indicate which weekday is scheduled.
One bit represents one weekday.
Bit0 (LSB) => Saturday.
Bit1 => Friday.
Bit2 => Thursday.
weekday
<interger>
6/6
Bit3 => Wednesday.
Bit4 => Tuesday.
Bit5 => Monday.
Bit6 => Sunday.
For example, to detect events on Friday and Sunday, set weekday
as 66.
Begin time of weekly schedule.
End time of weekly schedule.
begintime
endtime
hh:mm
hh:mm
6/6
6/6
(00:00 ~ 24:00 means always.)
To enable or disable trigger digital output.
0 => Disable
action_do_i<0~ 0,
(ndo-1)>_enable 1
6/6
6/6
6/6
6/6
1 => Enable
action_do_i<0~
(ndo1)>_duration
1~999
The duration of digital output is triggered in seconds.
action_server_
i<0~4>_enable
To enable or disable this server action.
The default value is 0.
0, 1
action_server_
i<0~4>_media
NULL, 0~4
The index of attached media.
Group: server_i<0~4>
Security
(get/set)
6/6
Name
name
Value
Description
string[40]
The identification of this entry
Indicate the server type.
email => email server.
ftp => ftp server.
http => http server.
ns => network storage.
The url of http server to upload.
The username to login in the server.
The password of the user.
The ftp server address
email,
ftp,
http,
ns
type
6/6
http_url
http_username string[64]
http_passwd
ftp_address
string[128]
6/6
6/6
6/6
6/6
string[64]
string[128]
User's Manual - 83
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
ftp_username
ftp_passwd
ftp_port
string[64]
string[64]
0~65535
6/6
6/6
6/6
The username to login in the server.
The password of the user.
The port to connect the server.
To enable or disable the passive mode.
0 => disable the passive mode.
1 => enable the passive mode.
The location to upload or store the media.
The email server address
0,
1
ftp_passive
6/6
ftp_location
email_address
email_username string[64]
string[128]
string[128]
6/6
6/6
6/6
6/6
The username to login in the server.
The password of the user.
email_passwd
email_
senderemail
email_
recipientemail
ns_location
ns_username
ns_passwd
ns_workgroup
string[64]
string[128]
6/6
The email address of sender.
string[128]
6/6
The email address of recipient.
string[128]
string[64]
string[64]
string[64]
6/6
6/6
6/6
6/6
The location to upload or store the media.
The username to login in the server.
The password of the user.
The workgroup for network storage.
Group: media_i<0~4>
Security
(get/set)
6/6
Name
name
Value
Description
string[40]
snapshot,
systemlog,
videoclip
The identification of this entry
type
6/6
The media type to send to the server or store by the server.
Indicate the source of media stream.
0 => the first stream.
1 => the second stream and etc.
Indicate the prefix of the filename.
To add date and time suffix to filename or not.
1 => to add date and time suffix.
0 => not to add it.
snapshot_source <integer>
6/6
6/6
6/6
snapshot_prefix string[16]
snapshot_
datesuffix
0,
1
snapshot_
preevent
snapshot_
postevent
0~7
0~7
6/6
6/6
It indicates the number of pre-event images.
The number of post-event images.
Indicate the source of media stream.
0 => the first stream.
videoclip_source <integer>
videoclip_prefix string[16]
6/6
1 => the second stream and etc.
Indicate the prefix of the filename.
6/6
6/6
videoclip_
preevent
0 ~ 9
It indicates the time of pre-event recording in seconds.
The time of maximum duration of one video clip in seconds.
The maximum size of one video clip file in Kbytes.
videoclip_
maxduration
1 ~ 10
6/6
6/6
videoclip_
50 ~ 1500
maxsize
Group: recording_i<0~1>
Security
(get/set)
6/6
Name
name
Value
Description
string[40]
The identification of this entry
84 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
To enable or disable this recoding.
0,
1
enable
priority
source
6/6
0 => Disable
1 => Enable
Indicate the priority of this recoding.
0,
1,
2
0 => low priority.
6/6
6/6
1 => normal priority.
2 => high priority.
Indicate the source of media stream.
0 => the first stream.
<integer>
<interger>
1 => the second stream and etc.
Indicate which weekday is scheduled.
One bit represents one weekday.
Bit0 (LSB) => Saturday.
Bit1 => Friday.
Bit2 => Thursday.
weekday
6/6
Bit3 => Wednesday.
Bit4 => Tuesday.
Bit5 => Monday.
Bit6 => Sunday.
For example, to detect events on Friday and Sunday, set weekday
as 66.
Begin time of weekly schedule.
End time of weekly schedule.
(00:00~24:00 means always.)
begintime
endtime
hh:mm
hh:mm
6/6
6/6
prefix
cyclesize
maxfilesize
string[16]
<integer>
50~6000
6/6
6/6
6/6
Indicate the prefix of the filename.
The maximum size for cycle recording in Kbytes.
The max size for one file in Kbytes
The destination to store the recording data.
0~4 => the index of network storage.
dest
0~4
6/6
Group: path
Security
(get/set)
<boolean> 7/7
<boolean> 7/7
Name
Value
Description
encoder1_start
encoder2_start
Specify the http push server is active for stream 1
Specify the http push server is active for stream 2
Group: https
Security
(get/set)
Name
Value
Description
1025 ~
65535
<boolean> 6/6
connect
enable
7/7
Specify the stunnel connect port
To enable or disable this secure http
Specify the https status.
-2 => invalid public key
-1 => waiting for certificated
0 => not installed
status
-2 ~ 1
6/6
6/6
1 => active
countryname
string[2]
Country name in certificate information
stateorprovincename string[128] 6/6
State or province name in in certificate information
localityname
organizationname
unit
commonname
validdays
string[128] 6/6
The locality name in certificate information
Organization name in certificate information
Unit name in certificate information.
Common name in certificate information
Certificatation valid period
string[64]
string[32]
string[64]
0 ~ 9999
6/6
6/6
6/6
6/6
User's Manual - 85
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Drive the digital output
Note: This request requires the privilege of viewer.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>][&do3=<state>][&do4=<state>]
[&return=<return page>]
Where state is 0, 1. “0” means inactive or normal state while “1” means active or triggered state.
Parameter
do<num>
Value
0,
1
Description
0 => inactive, normal state
1 => active, triggered state
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according the current path. If you omit this
parameter, it will redirect to an empty page.
return
<return page>
Example: Drive the digital output 1 to triggered state and redirect to an empty page
Query status of the digital input
Note: This request requires the privilege of viewer.
Method: GET/POST
Syntax:
If no parameter is specified, all the status of digital input will be returned.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <length>\r\n
\r\n
[di0=<state>]\r\n
[di1=<state>]\r\n
[di2=<state>]\r\n
[di3=<state>]\r\n
where <state> can be 0 or 1.
Example: Query the status of digital input 1
86 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Request:
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: 7\r\n
\r\n
di1=1\r\n
Query status of the digital output
Note: This request requires the privilege of viewer.
Method: GET/POST
Syntax:
If no parameter is specified, all the status of digital output will be returned.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <length>\r\n
\r\n
[do0=<state>]\r\n
[do1=<state>]\r\n
[do2=<state>]\r\n
[do3=<state>]\r\n
where <state> can be 0 or 1.
Example: Query the status of digital output 1
Request:
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: 7\r\n
\r\n
do1=1\r\n
Capture single snapshot
Note: This request require normal user privilege
Method: GET/POST
Syntax:
User's Manual - 87
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
If the user requests the size larger than all stream setting on the server, this request will failed!
Parameter
channel
Value
Default
0
Description
The channel number of video source
0~(n-1)
<available
resolution>
1~5
resolution
quality
0
3
The resolution of image
The quality of image
Server will return the most up-to-date snapshot of selected channel and stream in JPEG format. The size and
quality of image will be set according to the video settings on the server.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: image/jpeg\r\n
[Content-Length: <image size>\r\n]
<binary JPEG image data>
Account management
Note: This request requires administrator privilege
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/editaccount.cgi?method=<value>&username=<name>[&userpass=<value>]
[&privilege=<value>][&privilege=<value>][…] [&return=<return page>]
Parameter
Value
add
Description
Add an account to server. When using this method,
“username” field is necessary. It will use default value of
other fields if not specified.
Remove an account from server. When using this method,
“username” field is necessary, and others are ignored.
Modify the account password and privilege. When using this
method, “username” field is necessary, and other fields are
optional. If not specified, it will keep original settings.
The name of user to add, delete or edit
The password of new user to add or that of old user to
modify. The default value is an empty string.
The privilege of user to add or to modify.
Viewer’s privilege
Operator’s privilege
Administrator’s privilege
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
method
delete
edit
username
userpass
<name>
<value>
<value>
viewer
operator
admin
privilege
return
<return page>
88 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
System logs
Note: This request require administrator privilege
Method: GET/POST
Syntax:
Server will return the up-to-date system log.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <syslog length>\r\n
\r\n
<system log information>\r\n
Upgrade firmware
Note: This request requires administrator privilege
Method: POST
Syntax:
Post data:
fimage=<file name>[&return=<return page>]\r\n
\r\n
<multipart encoded form data>
Server will accept the upload file named <file name> to be upgraded the firmware and return with <return page>
if indicated.
System Information
Note: This request requires normal user privilege
Method: GET/POST
Syntax:
Server will return the system information. In HTTP API version 2, the CapVersion will be 0200. All the fields in the
previous version (0100) is obsolete. Please use “getparam.cgi?capability” instead.
User's Manual - 89
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <system information length>\r\n
\r\n
Model=<model name of server>\r\n
CapVersion=0200\r\n
Parameter
Model
Value
Description
system.firmwareversion
MMmm, MM is major
version from 00 ~ 99
mm is minor version from The capability field version
00 ~ 99
ex: 0100
Model name of server. Ex:IP3133-VVTK-0100a
CapVersion
IP filtering
Note: This request requires administrator access privilege
Method: GET/POST
Syntax:
[&index=<value>][&return=<return page>]
Parameter
Value
Description
Add a set of allow IP address range to server. Start and
end parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
Add a set of deny IP address range to server. Start and
end parameters must be specified. If the index parameter is
specified, it will try to add starting from index position.
Remove a set of allow IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority than the [index] parameter.
Remove a set of deny IP address range from server. If
start and end parameters are specified, it will try to remove
the matched IP address. If index is specified, it will try to
remove the address from given index position. [start, end]
parameters have higher priority than the [index] parameter.
The start IP address to add or to delete.
addallow
adddeny
Method
deleteallow
deletedeny
start
end
index
<ip address>
<ip address>
<value>
The end IP address to add or to delete.
The start position to add or to delete.
Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit this
parameter, it will redirect to an empty page.
return
<return page>
90 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Get SDP of Streamings
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the “subgroup
of network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET method.
Open the network streamings
Note: This request requires viewer access privilege
Syntax:
For http push server (mjpeg):
http://<servername>/<network_http_s<0~m-1>_accessname>
For rtsp (mp4), user needs to input the url below for a rtsp compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
For detailed streaming protocol, please refer to “control signaling” and “data format” documents.
Senddata
Note: This request requires privilege of viewer
Method: GET/POST
Syntax:
[com=<value>][&data=<value>][&flush=<value>] [&wait=<value>] [&read=<value>]
Parameter
com
Value
1 ~ <max. com port
number>
Description
The target com/rs485 port number
User's Manual - 91
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
<hex decimal data>[,<hex The <hex decimal data> is s series of digit within 0 ~ 9, A ~ F. Each
data
decimal data>]
comma separates the commands by 200 milliseconds.
yes => receive data buffer of COM port will be cleared before read.
no => do not clear the receive data buffer.
wait time in milliseconds before read data
flush
wait
yes,no
1 ~ 65535
1 ~ 128
the data length in bytes to read. The read data will be in return
read
page.
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/plain\r\n
Content-Length: <system information length>\r\n
\r\n
<hex decimal data>\r\n
Where is hex decimal data is a series of digit within 0 ~ 9, A ~ F.
92 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Technical Specifications
Networking
System
Η10/100 Mbps Ethernet, RJ-45
ΗProtocols: IPv4, TCP/IP, HTTP, UPnP, RTSP/RTP/RTCP, IGMP,
SMTP, FTP, DHCP, NTP, DNS, DDNS, and PPPoE
ΗCPU: VVTK-1000 SoC
ΗFlash: 8MB
ΗRAM: 64MB
ΗEmbedded OS: Linux 2.4
Alarm and Event Management
ΗTriple-window video motion detection
ΗOne D/I and one D/O for external sensor and alarm
ΗIR Illuminators up to 15 meters
Lens
ΗBoard lens,vari-focal, f=3.3 mm ~ 12 mm, F1.4~2.9, auto-iris
(DC), focus range: 50 cm to infinity
ΗEvent notification using HTTP, SMTP, or FTP
ΗLocal recording of MP4 file
ΗRemovable IR-cut filter: Auto/Schedule
Angle of view
Η23° ~ 85.2° (horizontal)
Security
ΗMulti-level user access with password protection
Η14.8° ~ 51.6° (vertical)
ΗIP address filtering
Shutter Time
Η1/30 sec. to 1/15000 sec.
Users
ΗCamera live viewing for up to 10 clients
Image Sensor
Dimension
Η180 mm (D) x 70 mm (W) x 70 mm (H)
Weight
Η1/3.3” Wide Dynamic Range CMOS Sensor
Minimum Illumination
Η0 Lux with IR Illuminators
Video
ΗCompression: MJPEG & MPEG-4
ΗStreaming:
ΗNet: 969 g
LED Indicator
ΗSystem power and status indicator
Simultaneous dual-streaming
MPEG-4 streaming over UDP, TCP, or HTTP
MPEG-4 multicast streaming
MJPEG streaming over HTTP
ΗSupports 3GPP mobile surveillance
ΗFrame rates: 720x480 up to 25fps
ΗSystem activity and network link indicator
Power
Η12V DC, 24V AC
ΗConsumption: Max 6 W
Η802.3af compliant Power over Ethernet
Approvals
ΗCE, FCC, C-Tick, LVD, VCCI
Image settings
ΗAdjustable image size, quality, and bit rate
ΗTime stamp and text caption overlay
ΗFlip & mirror
ΗConfigurable brightness, contrast, and saturation
ΗAGC, AWB, AEC
Operating Environments
ΗTemperature: -20° ~ 50°C (32° ~ 122° F)
ΗHumidity: 20 % ~ 80 % RH
ΗIP66-rated housing for weatherproof
ΗAutomatic or manual day/night mode
ΗSupports privacy masks
Viewing System Requirements
ΗOS: Microsoft Windows 2000/XP/Vista
ΗBrowser: Internet Explorer 6.x or above
ΗCell phone: 3GPP player
Audio
ΗCompression:
GSM-AMR speech encoding, bit rate: 4.75 kbps to 12.2 kbps
MPEG-4 AAC audio encoding, bit rate: 16 kbps to 128 kbps
ΗInterface:
External microphone input
Audio output
ΗReal Player: 10.5 or above
ΗQuick Time: 6.5 or above
Installation, Management, and Maintenance
ΗInstallation Wizard 2
Η16-CH recording software
ΗSupports firmware upgrade
ΗSupports two-way audio by SIP protocol
ΗSupports audio mute
Applications
ΗSDK available for application development and system integration
User's Manual - 93
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Technology License Notice
MPEG-4 AAC Technology
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS PRODUCT MAY
NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD TO PC SOFTWARE, YOU
MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES. FOR MORE INFORMATION, PLEASE REFER TO
HTTP://WWW.VIALICENSING.COM.
MPEG-4 Visual Technology
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE
WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY
BE OBTAINED FROM MPEG LA, LLC. PLEASE REFER TO HTTP://WWW.MPEGLA.COM.
AMR-NB Standard
THIS PRODUCT IS LICENSED UNDER THE AMR-NB STANDARD PATENT LICENSE AGREEMENT. WITH
RESPECT TO THE USE OF THIS PRODUCT, THE FOLLOWING LICENSORS’ PATENTS MAY APPLY:
TELEFONAKIEBOLAGET ERICSSON AB: US PAT. 6192335; 6275798; 6029125; 6424938; 6058359. NOKIA
CORPORATION: US PAT. 5946651; 6199035. VOICEAGE CORPORATION: AT PAT. 0516621; BE PAT. 0516621;
CA PAT. 2010830; CH PAT. 0516621; DE PAT. 0516621; DK PAT. 0516621; ES PAT. 0516621; FR PAT. 0516621;
GB PAT. 0516621; GR PAT. 0516621; IT PAT. 0516621; LI PAT. 0516621; LU PAT. 0516621; NL PAT. 0516621;
SE PAT 0516621; US PAT 5444816; AT PAT. 819303/AT E 198805T1; AU PAT. 697256; BE PAT. 819303; BR PAT.
9604838-7; CA PAT. 2216315; CH PAT. 819303; CN PAT. ZL96193827.7; DE PAT. 819303/DE69611607T2; DK
PAT. 819303; ES PAT. 819303; EP PAT. 819303; FR PAT. 819303; GB PAT. 819303; IT PAT. 819303; JP PAT. APP.
8-529817; NL PAT. 819303; SE PAT. 819303; US PAT. 5664053. THE LIST MAY BE UPDATED FROM TIME TO
TIME BY LICENSORS AND A CURRENT VERSION OF WHICH IS AVAILABLE ON LICENSOR’S WEBSITE AT
HTTP://WWW.VOICEAGE.COM.
94 - User's Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Electromagnetic Compatibility (EMC)
This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions.
This device may not cause harmful interference, and
■
■
This device must accept any interference received, including interference that may cause undesired
operation.
USA - This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a partial installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
■
■
■
■
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Europe
-- This digital equipment fulfills the requirement for radiated emission according to limit B of
EN55022/1998, and the requirement for immunity according to EN50082-1/1992.
Liability
VIVOTEK Inc. cannot be held responsible for any technical or typographical errors and reserves the right
to make changes to the product and manuals without prior notice. VIVOTEK Inc. makes no warranty
of any kind with regard to the material contained within this document, including, but not limited to, the
implied warranties of merchantability and fitness for any particular purpose.
User's Manual - 95
Download from Www.Somanuals.com. All Manuals Search And Download.
|