NETWORK CAMERA
Model:
IK-WD01A
User's Manual
For information on our latest products and peripheral devices, refer to the
following web page:
The above URL is subject to change without prior notice.
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing the IK-WD01A Network Camera. Before you start using
the camera, read this User's Manual carefully to ensure correct usage. Once you
have finished reading this User's Manual, keep it in a convenient place for future
reference. The design, specifications, software, and User's Manual contents are
subject to change without prior notice.
Terms and Trademarks
● The term "OS" is used in this User's Manual to indicate operating systems
compatible with this product.
－ Windows XP: Microsoft® Windows® XP operating system
－ Windows Vista: Microsoft® Windows® Vista Business operating system
● The formal name of Windows® is Microsoft® Windows® Operating System.
● Microsoft® and Windows® are trademarks or registered trademarks of Microsoft®
Corporation in the United States and other countries.
● Other product names appearing in this User's Manual may be trademarks or
registered trademarks of their respective holders.
NOTE
• This network camera might not operate correctly depending on the network environment.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1. Read Instructions
13. Lightning
All the safety and operating instructions
should be read before the product is
operated.
For additional protection on this video
product during a lightning storm, or
when it is left unattended and unused
for long periods of time, unplug it from
the wall outlet and disconnect the
power supply and cable system. This will
prevent damage to the video product
due to lightning and power-line surges. If
lightning occurs, do not touch the unit or
any connected cables in order to avoid
electric shock.
2. Retain Instructions
The safety instructions and user's manual
should be retained for future reference.
3. Warnings
Comply with all warnings on the product
and in the user's manual.
4. Follow Instructions
Follow all operating and use instructions.
5. Cleaning
14. Overloading
Do not overload the power supply or
extension cords as this can result in a
risk of fire or electric shock.
Disconnect this video product from the
power supply before cleaning.
6. Attachments
15. Object and Liquid Entry
Do not use attachments not
Never push objects of any kind into this
video product through openings as they
may touch dangerous electrical points or
short-out parts that could result in a fire
or electrical shock. Never spill liquid of
any kind on the video product.
recommended by the video product
manufacturer as they may cause hazards.
7. Water and Moisture
Do not use this video product near water.
Some examples are: near a bath tub,
wash bowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool.
8. Accessories
16. Servicing
Do not attempt to service this video
product yourself as opening or removing
covers may expose you to dangerous
electrical or other hazards. Refer all
servicing to qualified service personnel.
17. Damage Requiring service
Disconnect this video product from
the power supply and refer servicing to
qualified service personnel under the
following conditions.
Do not place this video product on an
unstable cart, stand, tripod, bracket
or table. The video product may fall,
causing serious injury to a person, or
serious damage to the product. Use
only with stand, tripod, bracket, or table
recommended by the manufacturer,
or sold with the video product. Any
mounting of the product should follow the
manufacturer's instructions, and should
use a mounting accessory recommended
by the manufacturer.
a. When the power-supply cord or plug is
damaged.
b. If liquid has been spilled, or objects
have fallen into the video product.
c. If the video product has been exposed
to rain or water.
9. Ventilation
This video product should never be
placed near or over a radiator or heat
register. If this product is placed in a built
in installation verify that there is proper
ventilation so that the camera temperature
operates within the recommended
temperature range.
d. If the video product does not operate
normally by following the operating
instructions in the user's manual.
Adjust only those controls that are
covered by the user's manual as an
improper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the video product
to its normal operation.
10. Power Sources
This video product should be operated
only from the type of power source
indicated on the information label. If you
are not sure of the type of power supply
at your location, consult your product
dealer.
e. If the video product has been dropped
or the cover has been damaged.
f. When the video product exhibits a
distinct change in performance which
indicates a need for service.
11. Power-Cord Protection
Power cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or against
them. Pay particular attention to cords at
plugs, screws and the point where they
exit the product.
18. Replacement Parts
When replacing parts be sure the
service technician uses parts specified
by the manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock or other hazards.
19. Safety Check
12. Installation
Install this video product on a secure part
of the ceiling or wall. If installed on an
unsecured location the camera could fall
causing injury and damage.
Upon completion of any service or repairs
to this video product, ask the service
technician to perform safety checks to
determine that the video product is in
proper operating condition.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrow
head symbol, within an equilateral
WARNING:
TO REDUCE THE RISK OF FIRE OR
triangle, is intended to alert the
user to the presence of uninsulated
"dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
CONNECT 24 VAC UL LISTED
CLASS 2 POWER SUPPLY.
The exclamation point within
a n e q u i l a t e r a l t r i a n g l e i s
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
FIELD INSTALLATION
MARKING:
WORDED: "THIS INSTALLATION
SHOULD BE MADE BY A QUALIFIED
SERVICE PERSON AND SHOULD
CONFORM TO ALL LOCAL CODES."
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON USE AND INSTALLATION
• This camera is for indoor use.
• Do not aim the camera at the sun
Never aim the camera at the sun even with the camera power off.
• Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe
may appear on the screen. However, this is not a malfunction.
• Treat the camera with care
Do not drop the camera or subject it to intense vibration.
• Never touch internal parts
Do not touch the internal parts of the camera other than the parts specified.
• Do not splash water on the camera
Install the camera where the camera can be kept dry. If the camera gets wet, turn
off the power and contact your dealer.
• Keep the camera installation away from video noise
If cables are wired near electric lighting wires or a TV set, noise may appear in
images. In this event, relocate cables or reinstall equipment.
• Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than the
specified operating range. Doing so could affect the internal parts or cause the
image quality to deteriorate. Special care is required to use the camera at high
temperature and humidity.
• Cleaning the camera
Turn the power off and use a dry cloth to clean the camera. When the dirt is hard
to remove, use a cloth with a mild detergent and wipe gently.
Do not use volatile substances (e.g. paint thinner, petroleum benzin, or household
pesticide) on the camera. Otherwise, it may cause discoloration or malfunctions.
Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles)
to clean the camera lens.
• Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and
contact your dealer. If you continue to use the camera when there is something
wrong with it, the trouble may get much worse and an unpredictable problem may
occur.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions for Use
Disclaimer
We disclaim any responsibility and shall be held harmless for any damages or losses
incurred by the user in any of the following cases:
1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user,
whether intentional or accidental; use under extreme operating conditions.
2. Malfunction or non-function resulting in indirect, additional or consequential
damages, including but not limited to loss of expected income and suspension of
business activities.
3. Incorrect use not in compliance with instructions in this user's manual.
4. Malfunctions resulting from misconnection to other equipment.
5. Repairs or modifications made by the user or caused to be made by the user and
carried out by an unauthorized third party.
6. Notwithstanding the foregoing, Toshiba's liabilities shall not, in any circumstances,
exceed the purchase price of the product.
Copyright and Right of Portrait
There may be a conflict with the Copyright Law and other laws when a customer
uses, displays, distributes, or exhibits an image picked up by the camera without
permission from the copyright holder. Please also note that transfer of an image
or file covered by copyright is restricted to use within the scope permitted by the
Copyright Law.
Protection of Personal Information
Images taken by the camera that reveal the likeness of an individual person may be
considered personal information. To disclose, exhibit or transmit those images over
the internet or otherwise, consent of the person may be required.
Usage Limitation
The product is not designed for any "critical applications." "Critical applications"
means life support systems, exhaust or smoke extraction applications, medical
applications, commercial aviation, mass transit applications, military applications,
homeland security applications, nuclear facilities or systems or any other
applications where product failure could lead to injury to persons or loss of life or
catastrophic property damage.
Accordingly, [Toshiba/TAIS] disclaims any and all liability arising out of the use of
the product in any critical applications.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
AC adapter
Be sure to use only the supplied AC adapter. Using a different AC adapter may
cause the camera to malfunction, heat up, or catch fire. Before using the AC
adapter, carefully read and observe the Important Safety Instructions ( → page 4)
and the notes below.
• Plug the AC adapter into the 120 VAC outlet.
If inserting it into other than 120 VAC outlet, it may result in electric shock or fire
hazard.
• Do not repair, modify or disassemble the AC adapter. It may result in electric
shock or fire hazard.
• Keep the blades of plug from any dust or dirt. Neglecting to do so may cause a
fire due to deterioration of the insulation. Pull out the power plug from the outlet
before cleaning the blades.
• Do not cover or wrap the AC adapter with a cloth or place it near heating devices.
It may cause fire or malfunction of the unit.
• Protect the power cord from being:
• damaged, modified for extension, or applied heat.
• pulled, put heavy objects, or pinched.
• bent, twisted extremely, or bundle.
Neglecting to do so may cause electric shock or fire hazard.
• Do not expose this AC adapter to water.
• Install the AC adapter properly on a wall or ceiling after plugging in the AC
adapter. Avoid dropping the AC adapter, failing to do so may cause serious
personal injury or death.
• Do not allow the connectors on the AC adapter to come into contact with any
other metal object as this may result in short circuit.
• To connect the AC adapter, firmly insert the plug end of the cable into the AC
adapter jack. Do not insert the plug into other jacks as this may cause a malfunc-
tion.
• When removing the connection cable, disconnect the cable by holding its plug. Do
not disconnect the cable by pulling on the cable.
• Do not drop the AC adapter or subject it to strong impact.
• Do not use the AC adapter in hot and humid places.
• Do not use the supplied AC adapter with devices other than this camera.
• Temperature increasing on the surface of the adapter is normal. Before moving
the adapter to another location, unplug it from the wall outlet, and wait until its
temperature decreases.
• Buzzing noises may come from inside. This does not indicate malfunction.
• Using the AC adapter near a radio, TV, or cellphone may cause interference. Use
the adapter at sufficient distances from these devices.
• Be sure to use the supplied AC adapter. Using different AC adapter may cause
fire hazard or the camera to malfunction.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AC adapter (AH1812-B)
Power source
Rated output
: 100-240 VAC 50/60 Hz 18 W
: 12 VDC, 1.5 A
Ambient temperature guaranteed for performance
: 0° C to 40° C (32° F to 104° F)
: -25° C to 85° C (-13° F to 185° F)
Maximum external dimensions : 34.5 x 75 x 46.5 mm 1.358 x 2.953 x 1.831 inches)
(width x height x depth)
Storage temperature
(
Cord length
: 1800 mm (70.866 inches)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
● Introduction.......................................................................................................................................2
● IMPORTANT SAFEGUARDS.......................................................................................................4
● NOTES ON USE AND INSTALLATION....................................................................................6
● Precautions for Use.......................................................................................................................7
● AC adapter........................................................................................................................................8
● Table of Contents........................................................................................................................10
● Contents.........................................................................................................................................12
Installation
● Installation......................................................................................................................................13
• Hardware installation ............................................................................................................................13
• Software installation .............................................................................................................................14
● Initial Access to the Network Camera.................................................................................15
• Check Network Settings......................................................................................................................15
• Add Password to prevent Unauthorized Access........................................................................15
How to Use
● How to Use....................................................................................................................................16
● Authentication..............................................................................................................................16
● Installing plug-in...........................................................................................................................17
● User's features.............................................................................................................................18
• Main Screen with Camera View.........................................................................................................18
• Digital Zoom.............................................................................................................................................19
• MP4 Recording........................................................................................................................................20
• Snapshot ...................................................................................................................................................20
• Client settings.........................................................................................................................................21
• Digital output...........................................................................................................................................23
• Audio communication............................................................................................................................24
● Administrator's features ...........................................................................................................25
• Fine-tuning for Best Performance ....................................................................................................25
• Opening accounts for new users......................................................................................................27
• Build a security application.................................................................................................................28
• Software revision upgrade...................................................................................................................29
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Definitions in Configuration
● Definitions in Configuration .....................................................................................................30
● System parameters....................................................................................................................31
● Security settings.........................................................................................................................32
● Network settings.........................................................................................................................33
• Network type............................................................................................................................................34
• HTTP...........................................................................................................................................................35
• Two way audio .........................................................................................................................................35
• FTP...............................................................................................................................................................35
• RTSP Streaming.....................................................................................................................................36
● DDNS...............................................................................................................................................37
● Access List....................................................................................................................................38
● Audio and Video...........................................................................................................................39
• Video Settings.........................................................................................................................................40
• Audio Settings.........................................................................................................................................41
• Image Settings........................................................................................................................................42
• Privacy Mask............................................................................................................................................43
● Motion detection..........................................................................................................................45
● Application .....................................................................................................................................46
• Event...........................................................................................................................................................47
• Server..........................................................................................................................................................48
• Media...........................................................................................................................................................50
● Recording .......................................................................................................................................51
● System log.....................................................................................................................................53
● Maintenance..................................................................................................................................54
Appendix
● A. Troubleshooting......................................................................................................................55
• Status LED ...............................................................................................................................................55
• Reset and restore .................................................................................................................................55
● B. Glossary (Index) ......................................................................................................................56
● C. Specifications..........................................................................................................................58
● D. Appearance Diagram ..............................................................................................................59
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
● IK-WD01A
● AC Adapter
● CD-ROM
● Alignment Sticker
● Warranty
● Quick Start Guide and Important
Safeguards
● Torx driver
● Screws and I/O Connector
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
In this user's manual, "User" refers to whoever has access to the Network Camera,
and "Administrator" refers to the person who can configure the Network Camera and
grant user access to the camera.
Hardware installation
Please verify that your product package
contains all the accessories listed in the
foregoing Package Contents. Depending
on the user's application, an Ethernet
cable may be needed. The Ethernet cable
should meet the specs of UTP Category 5.
Connect the power adapter jack to the Network Camera before plugging in to
the power socket. This will reduce the risk of accidental electric shock.
Upon powering up, the status LED will light up and then the device will go through
a booting process. The status LED will be steady orange when obtaining an IP
address. After obtaining an IP address, the LED will blink orange and red indicating
the camera is ready.
Please refer to the Quick Start Guide for details to the hardware installation.
To install in Ethernet
Make sure the Ethernet is firmly connected to a switch hub. After attaching the
Ethernet cable plug in the power adapter. If the LED turns out to blink orange-color,
go to next paragraph "Software installation".
Power over Ethernet (PoE) installation
Connect the Ethernet cable to a PoE switch or hub and to the camera. The camera
will go through the "power up" sequence. Proceed to "Software installation" after the
camera goes into the ready state.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation (Cont.)
General I/O terminal block
This Network Camera provides a general I/O terminal block with one digital input and
one digital output device control. The pin definition is as below.
1: Power
2: Digital output
3: Digital input
4: Ground
The connection definition is as below when "Digital input" is used for alarm input.
1
2
3
Alarm switch
4
External/Internal MIC switch
Switch“Internal”or“Microphone”to set up the source of microphone input.
Software installation
At the end of the hardware installation, users can use Installation Wizard program
included in the product CD-ROM to find the location of the Network Camera. There
may be many Network Cameras in the local network. Users can differentiate the
Network Cameras with the serial number. The serial number is printed on the
labels on the carton and the bottom of the Network Camera body. Please refer
to the Quick Start Guide for details to the Installation Wizard.
Once installation is complete, the Administrator should proceed to the next
section "Initial Access to the Network Camera" for necessary checks and
configurations.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Access to the Network Camera
Check Network Settings
The Network Camera can be connected either before or immediately after software
installation onto the Local Area Network. The Administrator should complete the
network settings on the configuration page, including the correct subnet mask
and IP address of gateway and DNS. Ask your network administrator or Internet
service provider for the detail information. By default the Network Camera requires
the Administrator to run installation every time it reboots. If the network settings
are to remain unchanged, disable the Install option. Refer to“Network settings”on
the System Configuration page for details. If any setting is entered incorrectly and
cannot proceed to setting up the Network Camera, restore the factory settings
following the steps in the“Troubleshooting”chapter of the Appendix.
Add Password to prevent Unauthorized Access
The default Administrator's password is blank and the Network Camera initially will
not ask for any password. The Administrator should immediately implement
a new password as a matter of prudent security practice. Once the
Administrator's password is saved, the Network Camera will ask for the user's
name and password before each access. The Administrator can set up a maximum
of twenty (20) user accounts. Each user can access the Network Camera except
to perform system configuration. Some critical functions are exclusive for the
Administrator, such as system configuration, user administration, and software
upgrades. The user name for the Administrator is permanently assigned as "root".
Once the password is changed, the browser will display an authentication
window to ask for the new password. Once the password is set, there is
no provision to recover the Administrator's password. The only option is to
restore to the original factory default settings.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use
A PC with the Windows operating system can use Internet Explorer (IE) to connect
to the Network Camera. A plug-in will be installed into IE when it is connected for the
first time.
Authentication
After opening the Web browser and typing in the URL of the Network Camera, a
dialogue window pops up to request a username and password. Upon successful
authentication, the following figure is displayed.
Note: Because this network camera is shipped without any password by factory
default, this dialogue window does not pop up.
The foreground is the login window and the background shows the message if
authentication fails. The user may check the option box to save the password for
future convenience. This option is not available to the Administrator.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing plug-in
During initial access to the Network Camera in Windows, the web browser may
prompt for permission to install a new plug-in for the Network Camera. Permission
request depends on the Internet security settings of the user's PC or notebook.
If the highest security level is set, the computer may prohibit any installation and
execution attempt. This plug-in has been registered for certificate and is used to
display the video in the browser. Users may click on
to proceed. If the web
browser does not allow the user to continue to install, check the Internet security
option and lower the security levels or contact your IT or networking supervisor for
help.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
User's features
Main Screen with Camera View
The main page layout has two sections:
Configuration functions: The camera can be configured using these user
interfaces.
Camera View: What the camera sees.
Click on the configuration link to the left of the image window to enter the
configuration page.
Internet Explorer layout when streaming MPEG-4.
Internet Explorer layout when streaming JPEG.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Zoom
Clicking on the magnifier icon, under the camera view, the digital zoom control panel
will appear. Uncheck "Disable digital zoom" and use the slider control to change the
zoom factors.
Use the Area Of Interest windows to zoom in on a specific area.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
User's features (Cont.)
MP4 Recording
Click on the red circle button
on the plugin to start MP4 recording. You can set
the related options in the client setting page.
Snapshot
There are different frame sizes for stream 1 and stream 2.
The snapshot image will be of the larger frame size of the two.
Click on "Snapshot", web browser will pop up a new window to show the snapshot.
Users can place the mouse pointer on the snapshot and click the right button of
mouse to save it.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Client settings
There are four settings for the client side in IE.
1. The "Stream Options" is to select which one of the dual-streaming channels to
monitor.
2. The "MPEG-4 Media Options" determines which media type to stream using
the MPEG-4 mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
User's features (Cont.)
3. The "MPEG-4 Protocol Options" allows choices of the connection protocol
between client and server. The four protocol choices to optimize your usage are
UDP unicast, UDP multicast, TCP and HTTP.
• The UDP Unicast protocol allows for more real-time audio and video
streams. However, some packets may be lost due to network burst traffic
and images may be obscured.
• The UDP Multicast protocol saves server bandwidth while serving multiple
clients at the same time.
• The TCP protocol allows for less packet loss and produces a more accurate
video display. The downside with this protocol is that the real-time effect is
worse than that with the UDP protocol.
• The HTTP protocol allows the same quality as TCP protocol and the
user don't need to open specific port to streaming under some network
environment.
If no special need is required, UDP unicast protocol is recommended.
Generally speaking, the client's choice will be in the order of UDP multicast → UDP
unicast → TCP → HTTP. After the Network Camera is connected successfully,
"Protocol Option" will indicate the selected protocol. The selected protocol will be
recorded in the user's PC and will be used for the next connection. If the network
environment has changed, or the user wants to let the web browser again detect,
manually select the UDP protocol, save, and return HOME to re-connect.
4. The "MP4 Saving Options" save the selections and can specify the recording
folder, filename prefix and suffix.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital output
Select "ON" to activate triggering of the digital output or "OFF" to return the digital
output to the normal state.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
User's features (Cont.)
Audio communication
The camera supports two-way audio communication in the MPEG-4 mode so that
operators can transmit and receive audio simultaneously. By using the camera's
microphone input and an external speaker, you can communicate and give
instructions to people at the camera's location.
Note: Audio communication does not work with JPEG because JPEG only transmits
a series of images to the client.
Click
to enable audio transmission to the camera; click
to adjust the volume
again.
of microphone; click
to turn off the audio. To stop talking, click
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator's features
Fine-tuning for Best Performance
Best performance generally equates to the fastest image refresh rate with the best
video quality, and at the lowest network bandwidth as possible. The three factors,
"Maximum frame rate", "Constant bit rate", and "Fixed quality" for MPEG-4 mode and
"Maximum frame rate" and "Fixed quality" for JPEG mode on the Audio and Video
Configuration page, are correlative to allow for achieving the best performance
possible.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator's features (Cont.)
For Best Real-time Video Images
To achieve good real-time visual effect, the network bandwidth should be large
enough to allow a transmission rate of greater than 20 image frames per second.
If the broadband network is over 1 Mbps, set the "Constant bit rate" to 1000Kbps
or 1200Kbps, or set "Fixed quality" at the highest quality. The maximum frame rate
is 30. If your network bandwidth is more than 512 Kbps, you can adjust the bit
rate according to your bandwidth and set the maximum frame rate to 30 fps. If the
images vary dramatically in your environment, you may want to slow the maximum
frame rate down to 20 fps in order to lower the rate of data transmission. This allows
for better video quality and the human eyes cannot readily detect the differences
between those of 20, 25, or 30 frames per second. If your network bandwidth is
below 512 Kbps, set the "Constant bit rate" according to your bandwidth and try to
get the best performance by fine-tuning with the "Maximum frame rate". In a slow
network, greater frame rate results in blur images. Video quality performance will
vary somewhat due to the number of users viewing on the network; even when the
parameters have initially been finely tuned. Performance will also suffer due to poor
connectivity because of the network's burst constraint.
Only Quality Images Will Do
To have the best video quality, you should set "Fixed quality" at "Detailed" or
"Excellent" and adjust the "Maximum frame rate" to match your network's bandwidth.
If your network is slow and you receive "broken" pictures, go to the TCP or HTTP
protocol in "MPEG-4 Protocol Options" and choose a more appropriate mode of
transmission. The images may suffer a time delay due to a slower connection. The
delay will also increase with added number of users.
Somewhere Between Real-time and Clear Images
If you have a broadband network, set "Fixed quality" at "Good" or better, rather
than setting "Constant bit rate". You can also fix the bandwidth according to your
actual network speed and adjust the frame rate. Start from 30 fps down for best
results but not below 15 fps. If the image qualities are not improved, select a lower
bandwidth setting.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening accounts for new users
Protect Network Camera by passwords
The Network Camera is shipped without any password by default. That means
everyone can access the Network Camera including the configuration as long as the
IP address is known. It is necessary to assign a password if the Network Camera
is intended not to be accessed by others. Type a new word twice in [1] to enable
protection. This password is used to identify the administrator. Then add an account
with user name, password and authentication for your friends in [2]. You can edit or
delete users from [3].
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Administrator's features (Cont.)
Build a security application
The Administrator can use the built-in motion detection to monitor any movement
to perform many useful security applications. To upload the snapshots, users can
choose either email, FTP, HTTP or Network storage according to user's needs.
All server settings are in the Server section on the Application page. Refer to the
definition section for detail configuration.
1. Click on "Configuration" on the home page.
2. Click on "Motion detection" in the left column.
3. Check "Enable motion detection".
4. Click on "New" to have a new window to monitor video.
5. Type in a name to identify the new window.
6. Use the mouse to click, hold, and drag the window corner to resize or the title
bar to move the window.
7. Fine-tune using the "Sensitivity" and "Percentage" fields to best suit the
camera's environment. Higher "Sensitivity" detects the slighter motion. Higher
"Percentage" discriminates smaller objects.
8. Clicking on "Save" enables the activity display. Green means the motion in the
window is below the threshold and red means it is over the threshold.
9. Click on "Application" in the left column.
10. Add a server in the server section.
11. Add a media with snapshot type in media section. Set the number of pre-event
and post-event images to be uploaded.
12. Add a event in event section.
• Enter one event name and enable this event.
• Check the weekdays as you need and give the time interval to monitor the
motion detection every day.
• Select the Trigger on Motion detection and Check the window name set in
step 5.
• Set the appropriate delay time to avoid continuous false alarms following the
original event.
• Check the server name set in Step 10 and select the media name set in
Step 11.
13. Click on "Save" to save the settings.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Software revision upgrade
com). An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera
with just a few clicks. The upgrade function is available to only the Administrator. To
upgrade the system, follow the procedures below.
1. Download the firmware file named "xxx.pkg" from the appropriate product folder.
2. Run the Installation Wizard and proceed by following the prompts. Refer to the
instructions of the Installation Wizard on CD-ROM for details.
3. Or upgrade firmware from Maintenance settings directly.
4. The entire process will finish in a few minutes and then automatically restart the
system.
If power fails during the writing process to the Flash memory, the program
in the memory of the Network Camera could be permanently destroyed. If
the Network Camera does not restart properly, ask your dealer for technical
service.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Definitions in Configuration
Only the Administrator can access system configuration. Each category in the
left column will be explained in the following pages. The bold texts are the feature
sets on the Option pages. The Administrator may type the URL below the figure to
directly enter the configuration frame page.
<Network Camera> is the domain name or original IP address of the Network
Camera.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
System parameters
"Camera name" The text displays the title at the top of the main page.
"Turn off the LED indicator" Select this option to shut off the LED.
"Time zone" Adjust the time with that of the time-servers for local settings.
"Keep current date and time" Click on this to reserve the current date and time of
the Network Camera. An internal real-time clock maintains the date and time even
when the power of the system is turned off.
"Sync with computer time" Synchronize the date and time of the Network Camera
with the local computer.
"Manual" Adjust the date and time according to what is entered by the
Administrator. Notice the format in the related fields while doing the entry. Network
Camera starts up. It will fail if the assigned time-server cannot be reached.
"NTP server" Assign the IP address or domain name of the time-server. Leaving the
text box blank connects the Network Camera to the default time-servers.
"Update interval" Select hourly, daily, weekly, or monthly to update the time on the
NTP server.
"Digital input" Select High or Low to define normal status of the digital input. The
current status is shown, too.
"Digital output" Select Grounded or Open to define normal status of the digital
output. The current status is shown, too.
Click on the
button to save all the changes. Otherwise, the correct time will not
be synchronized.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Security settings
<Network Camera> is the domain name or original IP address of the Network
Camera.
“Root password”Change the Administrator's password by typing in the new
password identically in both text boxes. The typed entries will be displayed as
asterisks for security purposes. After pressing
enter the new password to access the menu.
, the Administrator will have to
“Add user”Type the new user's name and password and press
to insert the
new entry. The new user will be displayed in the user name list. There is a maximum
of twenty user accounts. There are three kinds of authentication: Administrator,
Operator and Viewer. Administrator can fully control the camera operation. Operator
can modify most of the camera's parameters except some privilege and network
options. Viewer can view, listen and control Digital Input/Digital Output of camera.
Network Camera can provide twenty accounts for your valuable customers or friends.
“Manage user”Pull down the user list to find the user's name and press
to
delete the selected user. Or edit the password or authentication of the selected
user and press
to take effect.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Network settings
<Network Camera> is the domain name or original IP address of the Network
Camera.
Any changes made on the Network Type section will restart the system in order to
save the changes. Make sure every field is entered correctly before clicking on
.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Network settings (Cont.)
Network type
“LAN”&“PPPoE”
The default type is LAN. Select PPPoE if using ADSL.
"Get IP address automatically" & "Use fixed IP address"
The default status is "Get IP address automatically". This can be tedious having
to perform software installation whenever the Network Camera starts. Therefore,
once the network settings, especially the IP address, have been entered correctly,
select“Use fixed IP address”then the Network Camera will skip installation at the
next boot. The Network Camera can automatically restart and operate normally after
a power outage.
Note: Users can run IP installer to check the IP address assigned to the Network
Camera if the IP address is forgotten or using the UPnP function provided by the
Network Camera (MS Windows XP provides UPnP function at My Network Place).
“IP address”By selecting "Use fixed IP address", the administrator can modify this
address. This address is required for network identification.
“Subnet mask”This is used to determine if the destination is in the same subnet.
The default value is "255.255.255.0".
“Default gateway”The gateway used to forward frames to destinations in a
different subnet. Invalid router setting will fail the transmission to destinations in a
different subnet.
“Primary DNS”The primary domain name server that translates hostnames into IP
addresses.
“Secondary DNS”Secondary domain name server that backups the Primary DNS.
“Primary WINS server”The primary WINS server that maintains the database of
computer name and IP address.
“Secondary WINS server”The secondary WINS server that maintains the
database of computer name and IP address.
“Enable UPnP presentation”Enable the UPnP camera short cut.
“Enable UPnP port forwarding”Enable the UPnP port forwarding.
“PPPoE”If using the PPPoE interface, fill the following settings from ISP.
“User name”The login name of PPPoE account.
“Password”The password of PPPoE account.
“Confirm password”Input password again for confirmation.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
HTTP
“Authentication”Supports basic and digest modes.
“HTTP port”This can be other than the default Port 80. Once the port is changed,
the users must be notified the change for the connection to be successful. For
instance, when the Administrator changes the HTTP port of the Network Camera
whose IP address is 192.168.0.100 from 80 to 8888, the users must type in the
“Secondary HTTP port”Supports for an alternate port to access the HTTP server.
“Access name for stream 1”Access URL of stream 1 for making connection from
the client software when using the JPEG codec.
“Access name for stream 2”Access URL of stream 2 for making connection from
the client software when using the JPEG codec.
Two way audio
“Two way audio port”This is the port for using two way audio communication.
FTP
“FTP port”This port can change from the default value of 21 to between 1025 to
65535. The external FTP server port must match the chosen number.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Network settings (Cont.)
RTSP Streaming
“Authentication”It supports disable, basic and digest modes.
“Access name for stream 1”Access URL of stream 1 for making connection from
the client software when using the MPEG-4 codec.
“Access name for stream 2”Access URL of stream 2 for making connection from
the client software when using the MPEG-4 codec.
Using rtsp://<ip address>/<access name> to make connection.
“RTSP port”The port can be changed to another number other than the default
Port 554.
“RTP port for video”The video channel port for RTP must be an even number.
“RTCP port for video”The video channel port for RTCP must be the port number of
video RTP plus 1.
“RTP port for audio”The audio channel port for RTP must be an even number.
“RTCP port for audio”The audio channel port for RTCP must be the port number
of audio RTP plus 1.
User can modify Multicast setting for stream1 and stream2.
“Always multicast”Select it to enable when connecting over 10 multicast clients.
“Multicast group address”Used by sources and the receivers to send and receive
content.
“Multicast video port”The video channel port for multicast must be an even
number.
“Multicast RTCP video port”The video channel port for multicast RTCP must be
the port number of multicast video port plus 1.
“Multicast audio port”The audio channel port for multicast must be an even
number.
“Multicast RTCP audio port”The audio channel port for multicast RTCP must be
the port number of multicast audio port plus 1.
“Multicast TTL”Specifies the number of routers (hops) that multicast traffic is
permitted to pass through before expiring on the network.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DDNS
“Enable DDNS”Turns on the DDNS function.
“Provider”The provider list contains seven hosts that provide DDNS services.
Please connect to the service provider's web site to review the service charges and
sign-up for the service if you want to use DDNS.
ChangeIP.com
No-IP.com
“Camera Name”If the User wants to use a DDNS service, enter the camera name
that is registered at the DDNS server.
“User name”The User Name field is necessary for logging into the DDNS server or
to notify the User of the new IP address.
Note: When this field is input as "User Name", the following field must be input as
"Password".
“Password”Input the password to access the DDNS service.
“Save”Click on this button to save current settings for the DDNS service.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Access List
<Network Camera> is the domain name or original IP address of the Network
Camera.
The access lists are to control the client's status by checking the client's IP
address.
The two lists for permission control are the Allowed list and Denied list.
The two lists for permission control are the Allowed list and Denied list. The
clients whose IP address is in the Allowed list can connect to the Network Camera
for receiving the audio/video streaming. To add a new IP address range, type the
Starting IP address and Ending IP address in the text boxes and click on the
Add button. To remove an existing IP address range, select the address from the
pull-down menu and click on the Delete button. Both the Allowed list and Denied
list can each have 10 entries.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video
<Network Camera> is the domain name or original IP address of the Network
Camera.
This product supports dual-stream. It provides two setting for video streams, but
only one setting for audio.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video (Cont.)
Video Settings
“Video title”The text string can be displayed on video.
“Color”Selects either color or monochrome video display.
“Power line frequency”Fluorescent lights flash according to the power line
frequency. Change the frequency setting to eliminate uncomfortable flash images
when the light source is only fluorescent lighting.
“Video orientation”
・ Flip: Vertically rotate the video.
・ Mirror: Horizontally rotate the video.
Note: Check both options if the Network Camera is installed upside down.
“Maximum Exposure Time”Adjust the maximum exposure time in different
environment.
・ Overlay title and time stamp on video and snapshot: Check if the title is to
be shown on video.
There are different video quality settings for stream1 and stream2.
・ Mode: If MPEG-4 is selected, streaming is in RTSP protocol. If JPEG is
selected, streaming is in server push mode.
・ Frame size: In either the MPEG-4 mode or the JPEG mode, the three options
are "176x144", "320x240" and "640x480".
MPEG-4 mode has three dependent parameters for video performance adjustment.
“Maximum frame rate”Limits the maximum refresh frame rate which can be
combined with the“Video quality”to optimize bandwidth utilization and video
quality.
“Intra frame period”The interval of intra frame.
“Video quality”settings are:
“Constant bit rate”Fixes the bandwidth utilization regardless of the video quality.
“Fixed quality”Select the desired video quality.
Note: The video quality may be poor due to the sending of the maximum frame
rate within the limited bandwidth when images are moving rapidly. Consequently,
to ensure detailed video quality (quantization rate) regardless of the network, it
will utilize more bandwidth to send the maximum frames when images change
drastically.
JPEG mode is limited to two parameters“Maximum frame rate”and“Video
quality”to adjust the video performance.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Settings
“Mute”Turn off audio.
“Internal microphone input gain”Modify the gain of the internal microphone input.
“External microphone input”There are two gain options, 0db and 20db.
“Audio type”Select audio codec“AAC”or“GSM-AMR”and the bit rate.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video (Cont.)
Image Settings
Click on this button to pop up another window to tune "Brightness",
"Contrast", "White Balance", "Saturation" and "Sharpness" for video
compensation. Each field has eleven levels ranging from -5 to +5 except "White
Balance" which has "Auto" or "Keep current value." In "Brightness" and
"Contrast" fields the value 0 indicates auto tuning. The user may press
to
fine-tune the image. When the image is O.K., press to set the image settings.
Click on
to recall the original settings without incorporating the changes.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Privacy Mask
Click on the button to pop open another window to set the privacy mask window.
Users can not view the blocked area or areas as set in privacy mask window.
“Enable privacy mask”Check this option to turn on privacy mask.
Click on this button to add a new window. At most five windows can exist
simultaneously. Use the mouse to click, hold, and drag the window frame to resize or
the title bar to move. Clicking on the‘x' at the upper right-hand corner of the window
deletes the window. The base of window axis is eight. You can see the X, Y, width
and height of the window.
Click on this button to save the settings.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and Video (Cont.)
"Window Name" The text will show at the top of the window.
The following figure shows the screen when
enabled.
is clicked and the privacy mask is
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Motion detection
“Enable motion detection”Check this option to turn on motion detection.
Click on this button to add a new window. At most three windows can exist
simultaneously. Use the mouse to click, hold, and drag the window frame to resize or
to move the title bar. Clicking on the‘x' at the upper right-hand corner of the window
deletes the window.
Click on this button to save the settings. A graphic bar will rise or fall
depending on the image variation. A green bar means the image variation is under
monitoring level and a red bar means the image variation is over monitoring level.
When the bar goes red, the detected window will also be outlined in red. Going back
to the homepage, the monitored window is hidden but the red frame shows when
motion is detected.
"Window Name" The text will show at the top of the window.
“Sensitivity”This sets the endurable difference between two sequential images.
“Percentage”This sets the space ratio of moving objects in the monitoring
window. Higher sensitivity and small percentage will allow easier motion detection.
The following figure shows the screen when
is clicked.
<Network Camera> is the domain name or original IP address of the Network
Camera.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Application
<Network Camera> is the domain name or original IP address of the Network
Camera.
There are three sections in application page. They are event, server and media. Click
to pop a window to add a new item of event, server or media. Click
to
delete the selected item from event, server or media. Click on the item name to pop
a window to edit it.
There can be at most three events. There can be at most five server and five media
configurations.
User can know the event name, status, weekly and time schedule and trigger type
in event section. The server name, type and address/location are shown in server
section.
The current media free space, media name and type are shown in media section.
After adding a new media, the value of free space will be updated. User cannot add
media which size is larger than media free space.
It is suggested to set server and media first before setting event. The servers
and media selected in event list are not modified or deleted. Please remove them
first from the event if you want to delete or modify them. Recommend that using
different media in different event to make use all media be produced and received
correctly. If using the same media in different events and the events trigger almost
simultaneously, the servers in the second triggered event will not receive any media;
there would be only notifications.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Event
A maximum of three events can be registered.
“Event name”Unique name for the event.
“Enable this event”Check to enable this event.
“Priority”The event with highest priority will be executed first.
“Delay second(s) before detecting next event”Delay, in seconds, to check the
next event setting. This setting is used in motion detection and digital input trigger
type.
And the four kinds of trigger are supported.
“Video motion detection”Select the windows which need to be monitored.
“Periodically”The event is triggered in minutes at specified intervals.
“Digital input”To monitor digital input.
“System boot”The event is triggered when the system boots up. The weekly and
time schedules are provided.
“Sun”～“Sat”Select the days of the week to perform the event.
“Time”show“Always”or input the time interval.
The default action is triggered digital output. If there are servers configured, the
user can select them from“Server name”, too.
“Trigger digital output”Check it to trigger digital output for specific seconds
when event is triggered.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Application (Cont.)
Server
A maximum of five servers can be registered.
“Server name”The unique server name.
The four kinds of servers supported are email server, FTP server, HTTP server and
network storage.
Email Server Settings.
“Sender email address”Email address of the sender.
“Recipient email address”Email address of the recipient.
“Server address”Domain name or IP address of the external email server.
“User name”User name on the external email server.
“Password”Password on the external email server.
FTP Server Settings.
“Server address”Domain name or IP address of the external FTP server.
“Server port”The default port is port 21 but this number can be changed to any
value from 1025 to 65535.
“User name”User name on the external FTP server.
“Password”Password on the external FTP server.
“FTP folder name”Name of folder on the external FTP server. The string must
conform to that of the external FTP server. Some FTP servers cannot accept
preceding slash symbol before the path without virtual path mapping. Refer to the
instructions for the external FTP server for details. The folder privilege must be open
for upload.
“Passive Mode”Check to enable transmission passive mode.
HTTP Server Settings.
“URL”URL to upload the media.
“User name”User name on the external HTTP server.
“Password”Password on the external HTTP server.
Network Storage Settings. Only one network storage is supported.
“Network storage location”Path to upload the media.
“Workgroup”Workgroup for network storage.
“User name”User name on the network storage.
“Password”Password on the network storage.
After entering the server settings, the user can click on
to test whether the
settings are correct. The testing result will be shown in a pop-up window.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Application (Cont.)
Media
A maximum of five medias can be registered.
“Media name”The unique name for media.
There are three kinds of media. They are snapshot, video clip and system log.
Snapshot Settings.
“Source”Select the source of the stream; stream1 or stream2.
“Send pre-event images”Number of pre-event images.
“Send post-event images”Number of post-event images.
“File Name Prefix”The prefix name will be added on the file name of the snapshot
images.
“Add date and time suffix to file name”Check to add timing information as file
name suffix.
Video Clip Settings.
“Source”Select the source of the stream; stream1 or stream2.
“Pre-event recording”Interval of pre-event recording in seconds.
Note: The two limitations for video clip file are "Maximum duration" and "Maximum
file size".
“Maximum duration”Maximum recording file duration in seconds.
“Maximum file size”Maximal file size that would be generated.
“File name prefix”The prefix name will be added on the file name of the video clip.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
The Network camera supports recording on network storage. Setting up editing
recording is the same as in application page. Recording name, status, weekly and
time schedule, stream source and destination of recording must be entered. There
can be at most two recording entries. To record on network storage, add the network
storage server in application page first.
<Network Camera> is the domain name or original IP address of the Network
Camera.
“Recording name”Unique name for recording entry.
“Enable this recording”Check to enable this event.
“Priority”The recording with higher priority will be executed first.
“Source”Select the source of the stream: stream 1 or stream 2.
Weekly and Time Schedule Settings.
“Sun”“Sat”Select the days of the week.
̃
“Time”Select“Always”or input the time interval.
“Destination”Select the network storage server.
“Max. recording capacity”Total size for cycle recording in Kbytes.
“File size for each recording”Single file size in Kbytes.
“File Name Prefix”The prefix name will be added on the file name of the recording.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (Cont.)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
System log
The Network camera support logs the system messages on a remote server. The
protocol is compliant to RFC 3164. If using an external Linux server with syslogd
service, use "-r" option to turn on the facility for receiving the log from remote
machine. Or you can use some software on Windows which is compliant to RFC
3164.
Check "Enable remote log" and input the "IP address" and "port" number of the
log server to enable the remote log facility.
In the "Current log", it displays the current system log file. The content of the log
provides useful information about configuration and connection after system boot-
up.
<Network Camera> is the domain name or original IP address of the Network
Camera.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Five actions can be selected.
“Reboot”Click the reboot button to restart the device.
“Restore”Click it to restore all setting to factory default except setting in "Network
type" in network page.
“Factory default”Click on Factory default button on the configuration page to
restore the factory default settings. Any changes made so far will be lost and the
system will be reset to the initial factory settings. The system will restart and
require the installer program to set up the network again.
“Upgrade firmware”Select the firmware file and click upgrade button.
<Network Camera> is the domain name or original IP address of the Network
Camera.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
A. Troubleshooting
Status LED
The following table lists the LED patterns in general.
Condition
LED color
Loading system after power on
During booting procedure
Detecting and setting network
Blink green and orange (twice)
No LEDs illuminated
Steady orange till IP address is
confirmed
After network is setup (system up)
During the upgrade firmware process
Blink orange and red
Rapidly blink orange till firmware is
upgraded
Reset and restore
The reset button is located on the back of the Network Camera. Use this button to
reset the system or restore the factory default settings. Sometimes just resetting
the system sets the system back to a normal state. If the system problems remain
after reset, restore to the factory settings and perform the installation again.
RESET: Click on the button.
RESTORE:
1. Continuously press on the reset button until the status LED
rapidly blinks orange. It takes about 30 seconds.
2. Upon successful restore, the status LED will blink orange
and red.
Restoring the factory defaults will erase any previous settings. Reset or
restore the system after power on.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Glossary (Index)
Digital In/Out .................................................... 31
(Digital input/output)
A
Accessories ...................................................... 12
Access list ......................................................... 38
Administrator .................................................... 32
Alarm setting ............................................ 45, 46
Audio output ........ 41, Quick Start Guide: 12
Audio setting .................................................... 41
Digital zoom ....................................................... 19
DNS ...................................................................... 34
(Domain Name System)
Domain Name Systems translates IP
addresses into names making it easier to
manage hosts.
B
E
Browser .................................................................. 3
Software to browse Web screens.
Ethernet cable .................................................. 13
E-mail ................................................................... 48
Microsoft® Corporation Internet ExplorerTM
only.
F
Firmware ............................................................. 29
C
Program to run this product. It is installed
in the flash memory, and can be updated
from PC by using PC upload function of
the WEB.
Camera name .................................................... 31
Configuration ..................................................... 30
Contents ............................................................. 12
Frame rate .......................................................... 26
The rate of number of pictures that are
translated in a second.
D
DDNS ................................................................... 37
(Dynamic Domain Name System)
Frame size .......................................................... 40
FTP ....................................................................... 35
(File Transfer Protocol)
This is the technique to overwrite the
information of DNS（Domain Name
System）server dynamically and forward
only different informations between DNS
servers.
A protocol to transfer file(s) to and from
other network devices. The network
camera supports both active.
Because of this, it enables to reduce
forwarding data which are needed to renew
information of DNS server, and reduce
overhead of the network. When combined
with DHCP (Dynamic Host Configuration
Protocol), it is possible to assign IP
address and host name right away as the
host on the LAN changes.
H
HTTP port number ........................................... 35
I
Image settings ................................................. 42
Installation Wizard .......Quick Start Guide: 16
I/O terminal block ............................................. 14
IP address .......................................................... 34
Default gateway .............................................. 34
Network devices cannot communicate
directly with devices in other networks.
In this case, communication becomes
possible by using devices like a router.
Unique string of numbers that identifies
network devices. All devices communicate
with IP must have IP addresses. IP
address can be divided into network ID
and host ID.
Default gateway is the IP address of the
router.
DHCP ................................................................... 34
(Dynamic Host Configuration Protocol)
This is the protocol to assign IP address
dynamically to each client on TCP/IP
network. DHCP server controls information
of IP address, gateway address, domain
name and subnet mask and can assign
these to client.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
J
S
JPEG .................................................................... 40
(Joint Photographic Experts Group)
Security settings ............................................. 32
SMTP ................................................................... 48
(Simple Mail Transfer Protocol)
Standard gauge for compression of
colored still image by ITU-TS (International
Telecommunication Union: ex-CCITT)
and ISO (International Organization for
Standardization). It can compress a still
image between 1/10 to 1/100 of size.
Protocol for sending e-mail on the Internet
and Intranet.
Specifications ................................................... 58
Subnet mask ..................................................... 34
Method for spliting IP network into a series
of sub groups or subnets. By using this
system, it estimates whether IP address
of the addressed host is in local network
or remote network.
L
LAN ....................................................................... 34
(Local Area Network)
System Time ..................................................... 31
Computer networking in local area.
Log ........................................................................ 53
Log-in ................................................................... 16
T
TCP/IP ................................................................. 58
(Transmission Control Protocol/Internet
Protocol)
M
Main Screen ...................................................... 18
Mic. In ..............................Quick Start Guide: 12
(Microphone input)
Protocol for communications between
computers are used as standard for
transmitting data over networks. This
is the standard protocol of the Internet
and at the same time, it is the most
popularized protocol. Network layer
protocol is IP, and transport layer protocols
are TCP（Transmission Control Protocol）
and UDP（User Datagram Protocol). FTP,
SMTP and other applications use TCP/IP.
Motion Detection ............................................. 45
N
Network settings ............................................. 33
NTP server ......................................................... 31
(Network Time Protocol)
Server which provides accurate date and
time from network.
U
Upgrade firmware ............................................ 54
User ...................................................................... 32
O
OS ......................................................................... 61
W
White balance ................................................... 42
P
Protocol .............................................................. 58
R
Recording ........................................................... 51
Reset button .................Quick Start Guide: 12
Resolution .......................................................... 40
57
Download from Www.Somanuals.com. All Manuals Search And Download.
C. Specifications
Power supply
12 VDC 10 %, PoE
Power consumption
Image pickup device
Effective picture element
Scanning system
Minimum object illuminance
White balance
3.6 W
1/4 inch, CMOS
Horizontal 640, vertical 480 pixels
Progressive
0.1 lux (Auto), 0.2 lux (1/15 s), 0.4 lux (1/30 s), 0.8 lux (1/60 s), 1.6 lux (1/120 s)
Auto
Pan
175°
Tilt
+85°, -35°
Horizontal adjustment
Picture angle
175°
Wide end: horizontal 105° vertical 78°
Tele end: horizontal 53° vertical 39°
Available (5 to -5, target value adjusted)
Input 1, output 1
Brightness adjustment
I/O terminal
Image size
640 × 480, 320 × 240, 176 × 144
JPEG, MPEG4
Image compression system
Image quality setting
5 levels
Maximum frame rate at M-JPEG*1 30 fps at VGA
Maximum frame rate at MPEG 4
30 fps at VGA
10 clients
Number of simultaneous
deliveries for image or audio
Audio*2
Mic. in / Audio out
Motion alarm function
Image recording function
E-mail notification function
Network interface
Protocols
Available
Available (External storage only)
Available
Standard: IEEE 802.3af, type 10Base-T, 100Base-TX, connector RJ-45
TCP/IP, HTTP, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS,
PPPoE
OS
Windows XP, Windows Vista Business
Internet Explorer Ver. 6.0 or 7.0
0°C to 50°C (32°F to 122°F)
Browser
Guaranteed operating
temperature
Guaranteed operating humidity
Storage temperature
Storage humidity
20 % to 80 %
-20°C to 60°C (-4°F to 140°F)
90 % or less
Weight
575 g
External dimensions
143 (W) × 106 (H) mm
(5.63 (W) × 4.17 (H) inches)
User's manual and install software (CD-ROM) (×1),
Quick start guide and important safeguards (×1),
AC adapter (×1)
Accessories
Warranty (×1), Alignment sticker (×1), Anchor (×2),
Screws (×2), I/O connector (×1), Torx driver (×1)
*1: Varies in accordance with the object, image quality, network environment and performance of the personal
computer used.
*2: The sound may not be clear depending on the conditions of the lines.
● Designs and specifications may change without prior notice for better improvement.
● Screens, photos, illustrations and other diagrams contained in this user's manual may slightly change
from actual ones.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
D. Appearance Diagram
Ǟ143 (5.63)
67 (2.64)
80 (3.15)
Dimensions: mm (inch)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Technology License Notice
MPEG-4 AAC Technology
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO PATENT LICENSE. THIS
PRODUCT MAY NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT
REGARD TO PC SOFTWARE, YOU MAY MAKE SINGLE COPIES FOR ARCHIVAL PURPOSES.
FOR MORE INFORMATION, PLEASE REFER TO HTTP://WWW.VIALICENSING.COM.
MPEG-4 Visual Technology
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE
FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING
VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/
OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING
THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING
MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
AMR-NB Standard
THIS PRODUCT IS LICENSED UNDER THE AMR-NB STANDARD PATENT LICENSE
AGREEMENT. WITH RESPECT TO THE USE OF THIS PRODUCT, THE FOLLOWING
LICENSORS' PATENTS MAY APPLY:
TELEFONAKIEBOLAGET ERICSSON AB: US PAT. 6192335; 6275798; 6029125; 6424938;
6058359. NOKIA CORPORATION: US PAT. 5946651; 6199035. VOICEAGE CORPORATION: AT
PAT. 0516621; BE PAT. 0516621; CA PAT. 2010830; CH PAT. 0516621; DE PAT. 0516621; DK
PAT. 0516621; ES PAT. 0516621; FR PAT. 0516621; GB PAT. 0516621; GR PAT. 0516621; IT
PAT. 0516621; LI PAT. 0516621; LU PAT. 0516621; NL PAT. 0516621; SE PAT 0516621; US
PAT 5444816; AT PAT. 819303/AT E 198805T1; AU PAT. 697256; BE PAT. 819303; BR PAT.
9604838-7; CA PAT. 2216315; CH PAT. 819303; CN PAT. ZL96193827.7; DE PAT. 819303/
DE69611607T2; DK PAT. 819303; ES PAT. 819303; EP PAT. 819303; FR PAT. 819303; GB
PAT. 819303; IT PAT. 819303; JP PAT. APP. 8-529817; NL PAT. 819303; SE PAT. 819303; US
PAT. 5664053. THE LIST MAY BE UPDATED FROM TIME TO TIME BY LICENSORS AND A CURRENT
VERSION OF WHICH IS AVAILABLE ON LICENSOR'S WEBSITE AT
HTTP://WWW.VOICEAGE.COM.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
The original text (English) of end-user license agreement on free
software components used in the TOSHIBA Network Camera
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it
is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This General Public License applies to
most of the Free Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses
are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can
change the software or use pieces of it in new free programs; and that you know you can do these
things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or
to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give
the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and passed on,
we want its recipients to know that what they have is not the original, so that any problems introduced
by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the
danger that redistributors of a free program will individually obtain patent licenses, in effect making
the program proprietary. To prevent this, we have made it clear that any patent must be licensed for
everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The "Program",
below, refers to any such program or work, and a "work based on the Program" means either the
Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term "modification".) Each licensee is addressed as
"you".
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running the Program is not restricted, and the output from the Program is
covered only if its contents constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in
any medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and give any other recipients of the Program a copy of this License along
with the Program.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based
on the Program, and copy and distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files
and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it,
when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users may redistribute the program under these
conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself
is interactive but does not normally print such an announcement, your work based on the Program
is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are
not derived from the Program, and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them
as separate works. But when you distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of this License, whose permissions
for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of derivative or collective works
based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code
or executable form under the terms of Sections 1 and 2 above provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge
no more than your cost of physically performing source distribution, a complete machine-readable
copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2
above on a medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source
code. (This alternative is allowed only for noncommercial distribution and only if you received the
program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an
executable work, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything
that is normally distributed (in either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place counts as distribution of
the source code, even though third parties are not compelled to copy the source along with the object
code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided
under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void,
62
Download from Www.Somanuals.com. All Manuals Search And Download.
and will automatically terminate your rights under this License. However, parties who have received
copies, or rights, from you under this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else
grants you permission to modify or distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this License to do so, and all its
terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties
to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other
reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you from
the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations, then as a consequence you may not distribute
the Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you could
satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose of protecting the integrity
of the free software distribution system, which is implemented by public license practices. Many people
have made generous contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of
this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents
or by copyrighted interfaces, the original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution
is permitted only in or among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public
License from time to time. Such new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of
this License which applies to it and "any later version", you have the option of following the terms and
conditions either of that version or of any later version published by the Free Software Foundation.
If the Program does not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of
our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR
THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
63
Download from Www.Somanuals.com. All Manuals Search And Download.
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL
ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the
best way to achieve this is to make it free software which everyone can redistribute and change under
these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of
each source file to most effectively convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without
even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not,
write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive
mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it under certain conditions; type `show c'
for details.
The hypothetical commands `show w' and `show c' should show the appropriate parts of the General
Public License. Of course, the commands you use may be called something other than `show w' and
`show c'; they could even be mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a
"copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes
passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs.
If your program is a subroutine library, you may consider it more useful to permit linking proprietary
applications with the library. If this is what you want to do, use the GNU Lesser General Public License
instead of this License.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Security & Network Video Products
9740 Irvine Boulevard,
Irvine California 92618-1697
Phone Number: (877) 855-1349
Download from Www.Somanuals.com. All Manuals Search And Download.
|