Toshiba Flat Panel Television 20RTH User Manual

20-INCH PREMIUM  
TFT-LCD MONITOR  
20RTH  
INSTRUCTION MANUAL  
Please read this manual thoroughly before use, and keep it handy for future reference.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1). Read these instructions  
2). Keep these instructions..  
3). Heed all warnings.  
4). Follow all instructions.  
5). Do not use this apparatus near water.  
6). Clean only with dry cloth.  
7). Do not block any ventilation openings.  
Install in accordance with the maufacturer’s instructions.  
8). Do not install near any heat sources such as radiators, heat registers, stoves  
or other apparatus (including amplifiers) that produce heat.  
9). Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the prong.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safely.  
If the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10). Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11). Only use attachments/accessories specified by the manufacturer.  
12). Use only with the cart, stand, tripod, bracket, or table specified by  
the manufacturer, or sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus combination  
to avid injury from tip-over.  
13). Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in any way, such as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been dropped.  
INSTRUCTION MANUAL………………………………………………………………………………  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
-
-
The apparatus shall not be exposed to dripping or splashing and that no objects filled  
with liquids, such as vases, shall be placed on the apparatus.  
Minimum distances(e.g. 10cm)around the apparatus for sufficient ventilation.  
WARNING - To reduce the risk of fire or electric shock, do not expose the  
apparatus to rain or moisture.”  
The apparatus shall not be exposed to dripping or splashing and no objects filled  
with liquids, such as vases, shall be placed on the apparatus.”  
This symbol is intended to alert the user to the  
presence of uninsulated :dangerous voltage” within  
the product’s enclosure that may be of sufficient  
magnitude to constitute arisk of electric shock to persons.  
This symbol is intended to alert the user to the  
presence of important operating and  
maintenance(servicing) instructions in the literature  
accompanying the appliance.  
3 ……………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTIONk  
The power supply cord is used as the main disconnect device, ensure that the  
socket-outlet is located/installed near the equipment and is easily accessible.  
ATTENTIONN  
Le cordon d`alimentation est utillsé comme interrupteur général. La prise de  
courant doit être située ou installée à proximité du matériel et être facile  
d`accès  
NEVER REMOVE THE BACK COVER  
Removal of the back cover should be carried out only by qualified personnel.  
DO NOT USE IN HOSTILE ENVIRONMENTS  
To prevent shock or fire hazard, do not expose the unit to rain or moisture.  
This unit is designed to be used in the office or home. Do not subject the unit to vibrations,  
dust of corrosive gases.  
KEEP IN A WELL VENTILATED PLACE  
Ventilation holes are provided on the cabinet to prevent the temperature from rising.  
Do not cover the unit or place anything on the top of unit.  
AVOID HEAT  
Avoid placing the unit in direct sunshine or near a heating appliance.  
TO ELIMINATE EYE FATIGUE  
Do not use the unit against a bright back ground and where sunlight or other light sources will  
shine directly on the monitor.  
BE CAREFUL OF HEAVY OBJECT  
Neither the monitor itself nor any other heavy object should rest on the power cord.  
Damage to a power cord can cause fire or electrical shock.  
INSTRUCTION MANUAL …………………………………………………………………………… 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
- Consult the dealer or an experienced radio, TV technician for help.  
- Only shielded interface cable should be used.  
Finally, any changes or modifications to the equipment by the user not expressly approved by  
the grantee or manufacturer could void the users authority to operate such equipment.  
DOC COMPLIANCE NOTICE  
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital  
apparatus set out in the radio interference regulation of Canadian Department of  
communications.  
5 ……………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A. BOTTOM PANEL CONTROL  
1
7
6
5
4 3  
2
1. DC 15V (12V) IN  
2. COMPONENT Y,Pb,Pr & SOUND L,R  
3. AUDIO OUT  
4. PC STEREO IN  
5. D-SUB IN  
6. DVI IN  
7. HDMI IN  
B. SIDE PANEL CONTROL  
1. VIDEO 1(AV1) IN  
1
2
2. VIDEO 1(AV1) OUT  
3. VIDEO 2(AV2) IN  
3
4
4. VIDEO 2(AV2) OUT  
5. S-VIDEO (Y/C) IN  
5
6
6. S-VIDEO (Y/C) OUT  
7. AV1, S-VIDEO AUDIO IN  
8. AV1, S-VIDEO AUDIO OUT  
9. AV2 AUDIO IN  
7
8
9
10  
10. AV2 AUDIO OUT  
11. DC15V(12V) ADAPTOR  
11  
INSTRUCTION MANUAL…………………………………………………………………………… 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C. REMOTE CONTROLLER  
1. POWER(  
)
Turns the power ON or OFF. There will be a few  
seconds delay before the display appears.  
2. SOURCE  
Select pc or video( AV1/AV2/S-Video/DVI/PC) sources.  
3. AUTO  
Auto geometry adjustment in PC Source.  
4. MUTE  
Mute the sound.  
5. MENU  
Activates and exits the On Screen Display.  
6. EXIT  
Exit the On Screen Display.  
7. VOL(  
)
Increases or decreases the level of audio volume.  
8. UP/DOWN  
Move to OSD menu.  
9. ENTER  
Accepts your selection or displays the current mode.  
10. INFO  
Input mode information Display.  
11. STILL  
Pause the picture.  
12. PIP (Picture In Picture)  
Activates PIP mode.  
13. P.INPUT  
Select PC or video source.  
14. P.POS  
Move the position of sub picture for PIP mode.  
15. P.SIZE  
Change the size of sub and main picture for PIP mode.  
16. SWAP  
Alternates between main and sub picture.  
17. ARC (Aspect Ratio Control)  
Select screen ratio.  
18. APC (Auto Picture Control)  
Select picture mode.  
19. ACC (Auto Color Control)  
Select Colour mode.  
20. S.SET  
Select Sound mode main input or sub input  
21. PC  
Select PC mode(PC,DVI)  
22. AV  
Select AV mode.(AV1,AV2,S-VIDEO)  
23. COMP  
Select COMPONENT mode.  
7 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D. FRONT KEY CONTROL  
3
9
1
2
4
7
8
5
6
1. MENU  
Activates and exits the On Screen Display.  
2. SOURCE  
Select PC or video source.  
Select On Screen Display menu  
3 / 4. / ▲  
This button allows user to enter the sub-menu of the activated function  
5 / 6. VOL ▶  
Adjust the volume / Adjust menu settings.  
7. IR Sensor  
Remote controller sensor.  
8. POWER LED  
The power LED(next to the power switch) lights with green when the power is turned ON.  
The power is turned off by pressing the power switch again and the power LED goes Red.  
9. POWER ON/OFF(  
)
Turns the power ON or OFF. There will be a few  
seconds delay before the display appears.  
INSTRUCTION MANUAL…………………………………………………………………………… 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A: CUSTOM MENU (Only PC mode)  
Press the MENU button and then up() / down() button to select the Custom menu.  
Press the up() / down() button to select Custom sub menu.  
Press (◀) /right() button to adjust picture setting.  
Press the MENU button to save.  
INSTRUCTION MANUAL…………………………………………………………………………… 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B. Picture / Sound Menu(Only Video mode)  
Press the MENU button and then up() / down() button to select the Picture / Sound.  
Press the right() or ENTER button.  
1. Picture Mode  
Press the up() / down() button to select the Picture Mode.  
Press the right() or ENTER button and then press up() / down() button to select the  
desire  
Picture Mode.  
Press the MENU button to save.  
11 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Color Tone  
Press the up() / down() button to select the Color Tone.  
Press the (▶) or ENTER button and then up()/down() button to select the desired color  
tone.  
Press the MENU button to save.  
INSTRUCTION MANUAL…………………………………………………………………………… 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Mute  
Press the up() / down() button to select the Mute.  
Press the (▶) or ENTER button and then up()/down() button to select the desired Mute.  
Press the MENU button to save.  
4. Volume  
Press the up() / down() button to select the Volume.  
Press (◀) /right() button to adjust Volume. Press the MENU button to save.  
13 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Size  
Press the up() / down() button to select the Size.  
Press the (▶) or ENTER button and then up()/down() button to select the desired Size.  
Press the MENU button to save.  
6. NR  
Press the up() / down() button to select the NR.  
INSTRUCTION MANUAL………………………………………………………………………………14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the (▶) or ENTER button and then up() / down() button to select on or off.  
Press the MENU button to save  
6. PC (Only PC mode)  
Press the up() / down() button to select the PC  
Press the or ENTER button  
15 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the up() / down() button to select PC sub menu  
Press the right() or ENTER button and then left (◀) /right() button to adjust PC setting.  
Press the MENU button to save.  
Auto Adjust: Auto geometry adjustment  
Phase: Adjust the number of horizontal picture elements.  
H. position: Move image horizontally on screen right or left.  
V. position: Move image vertically on screen up or down.  
Frequency: Adjust the vertical noise of screen image.  
C. PIP MENU  
Press the MENU button and then up() / down() button to select the PIP menu.  
Press the right() or ENTER button.  
INSTRUCTION MANUAL………………………………………………………………………………16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. PIP  
Press the up() / down() button to select the PIP.  
Press the right() or ENTER button and then press up() / down() button to select the On or  
Off.  
Press the MENU button to save.  
2. Input Source  
Press the up() / down() button to select the Input Source.  
17 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the right() or ENTER button and then press up() / down() button to select the desire  
Input Source.  
Press the MENU button to save.  
3. Size  
Press the up() / down() button to select the Size.  
INSTRUCTION MANUAL………………………………………………………………………………18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the right() or ENTER button and then press up() / down() button to select the desire  
Size.  
Press the MENU button to save.  
4. Position  
Press the up() / down() button to select the Position.  
19 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the right() or ENTER button and then press up() / down() button to select the desire  
Position.  
Press the MENU button to save.  
5. Swap  
Press the up() / down() button to select the Swap.  
Press the right() or ENTER button  
INSTRUCTION MANUAL………………………………………………………………………………20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Sound Select  
Press the up() / down() button to select the Sound Select.  
Press the right() or ENTER button and then press up() / down() button to select the desire  
Sound Select.  
Press the MENU button to save.  
21 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D. SETUP MENU  
Press the MENU button and then up() / down() button to select the Setup menu.  
Press the right() or ENTER button.  
1.Reset  
Press ENTER button to select the reset  
Reset: Select to reset all setting to the factory default values.  
INSTRUCTION MANUAL………………………………………………………………………………22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Language  
Press the up() / down() button to select the Language menu.  
Press the right() or ENTER button.  
Press the up() / down() button to select language.  
Press the MENU button to save.  
23 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. OSD Tone  
Press the up() / down() button to select the OSD tone menu.  
Press the right() or ENTER button  
Press the up() / down() button to select the desire OSD Tone.  
Press the MENU button to save.  
INSTRUCTION MANUAL………………………………………………………………………………24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Blue Screen  
Press the up() / down() button to select the blue screen.  
Press the right() or ENTER button.  
Press the up() / down() button to select on or off.  
Press the MENU button to save.  
25 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Key Lock  
Press the up() / down() button to select the key lock menu.  
Press the right() or ENTER button  
Press the up() / down() button to select on or off  
Press the MENU button to save.  
INSTRUCTION MANUAL………………………………………………………………………………26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the VESA standard mounting design and the 100mm hole pattern on the back panel  
to install the LCD monitor to the (optional) mounting bracket sold separately.  
Wall-mount Installation  
1.Remove the monitor stand bracket assembled with the monitor.  
2.Install the mounting bracket to the monitor using the screws provided with the mounting bracket.  
27 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIN ASSIGNMENTS  
ACCESSORY  
2. Power Cord  
1. User’s Manual  
3. Remote Control Unit  
And Battery  
4. VGA Cable  
INSTRUCTION MANUAL………………………………………………………………………………28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This monitor features a power management system to “power down” upon receipt of the  
VESA DPMS(The display power management signaling) from a VESA DPMS video card.  
The VESA DPMS-compliant video card performs this signaling system through not sending  
horizontal, vertical, or sync signal.  
This monitor enters an appropriate mode through identifying each of the three modes of the  
signaling system.  
POWER CONSUMPTION : 70W  
LED INDICATOR  
The power management feature of the monitor is comprised of four stages: On(Green),  
Standby, Suspend, Active off(Red on/off 1 sec) and Unsupported mode(Green).  
MODE  
ON  
LED COLOR  
MONITOR OPERATION  
Normal Operation  
GREEN  
STANDBY  
SUSPEND  
ACTIV OFF  
Screen blanks after preset idle time  
And some electronic circuits or all  
Circuitry in the monitor shut down.  
RED ON/OFF  
1 SEC  
UNSUPPORTES  
MODE  
Normal operation but the on screen  
Display will show error massage  
GREEN  
RED  
Not Operation  
POWER OFF  
29 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20“  
20.1˝ Diagonal AM-TFT(Active-Matrix)  
Pixel pitch(mm) : 0.255(H) x 0.255(V)  
BRIGHTNESS: 300cd/(Typical)  
LCD- Type  
CONTRAST RATIO: 800:1(Typical)  
VIEWING ANGLE: 178°/178°(H/V)  
RESPONSE TIME: 16msec(Typical)  
RESOLUTION  
(H x V)  
1600X1200 @60Hz  
HORIZONTAL: 31- 80KHz  
VERTICAL: 56-75Hz  
FREQUENCY  
VIDEO(2ch input 1.0Vp-p,  
75terminated, loop-through out)  
S-VIDEO(1ch input (Y/C) ,  
loop-through out)  
COMPONENT(Y,Pb,Pr, Sound L/R)  
DVI D(Digital Video Interface)  
INPUT SIGNAL  
HDMI(High Definition Multimedia Interface)  
PC RGB  
AV(composite) Sound in/Out  
PC Stereo in  
Audio Out  
ACTIVE DISPLAY  
AREA (W x H)  
408 mm x 306 mm  
PACKING  
DIMENSIONS  
(W x D xH)  
535mm X 175mm X480 mm (21.07” X 6.89” X18.90”)  
Net Weight : 8.12Kg (17.9 Ibs)  
Gross Weight : 9.72Kg (21.4 Ibs)  
WEIGHT  
ELECTRICAL  
RATINGS  
DC 12V/ 5 A  
▶▶ NOTE :  
Technical specifications are subject to change without notice.  
INSTRUCTION MANUAL………………………………………………………………………………30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Going to Sleep”  
message on screen  
WEEE Symbols  
Correct Disposal of This Product  
(Waste Electrical &Electronic  
Equipment)  
(Applicable in the European Union and other  
European countries with separate collection systems)  
This marking shown on the product or its literature,indicates  
that it should not be disposed with  
other household wastes at the end of its working life.To  
prevent possible harm to the  
environment or human health from uncontrolled waste  
disposal,please separate this from other  
types of wastes and recycle it responsibly to promote the  
sustainable reuse of material resources.  
Household users should contact either the retailer where  
they purchased this product,or their  
local government office,for details of where and how they  
can take this item for environmentally  
safe recycling.  
Business users should contact their supplier and check the  
terms and conditions of the purchase  
contract.This product should not be mixed with other  
commercial wastes for disposal.  
31 …………………………………………………………………………… INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Texas Instruments Music Mixer TPA0202 User Manual
Topcom Blood Pressure Monitor BPM ARM 3301 User Manual
Toshiba Heat Pump A09 01P User Manual
Toshiba Laptop U400 S1001X User Manual
Toshiba Security Camera MK5002MAL User Manual
TP Link Telephone TL SF1005D User Manual
Tripp Lite Network Cables N001 014 GY R User Manual
Wagner SprayTech Power Roller 530226 User Manual
Wasp Bar Code Automobile Electronics CCD 80SIR User Manual
Weed Eater Blower 35879489 User Manual