Targus Computer Accessories AMP13US User Manual

1
YEAR LIMITED WARRANTY: We pride ourselves  
on the quality of our products. For complete warranty  
details and a list of our worldwide offices, please visit  
ject to change without notice. Microsoft, Windows, Win-  
dows Vista and PowerPoint are registered trademarks  
or trademarks of Microsoft Corporation in the United  
States and/or other countries. Mac and Keynote are  
registered trademarks of Apple Inc., registered in the  
U.S. and other countries. All trademarks and registered  
trademarks are the property of their respective owners.  
©2012 Targus Group International, Inc.  
N2953  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Targus Laser Presentation Remote  
Targus Laser Presentation Remote  
Remove the mini USB receiver stored inside the center compartment.  
Using Your Remote  
Before using the remote, please select your computer type and preferred  
presentation software. Locate the switch inside the battery compartment  
as shown.  
PC PowerPoint®  
Mac KeyNote®  
Mac PowerPoint®  
Slide the battery cover back into position until it “clicks” firmly into place.  
NOTE: SELECT “PC POWERPOINT” IF YOU USE A COMPUTER MADE BY:  
HP/COMPAQ, DELL, TOSHIBA, GATEWAY, PANASONIC, FUJITSU, SONY,  
IBM/LENOVO, ACER, ASUS, ETC.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Targus Laser Presentation Remote  
Targus Laser Presentation Remote  
This remote is a plug and play device. It will automatically operate when the  
USB receiver is connected to the computer. Plug the mini USB receiver into  
any available USB port on your computer.  
Keys and Functions  
3
4
2
5
1
8
Turn on the remote by pressing and holding the On/Off power button for 3  
seconds.  
6
7
9
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Targus Laser Presentation Remote  
Targus Laser Presentation Remote  
Press and hold for 3 seconds to turn on the remote.LED  
ring will turn green.  
Safety Measures  
Power button  
1
To avoid possible eye damage, never point the remote’s laser at people,  
especially their faces, or look directly into the remote’s laser beam.  
• Avoid pointing the remote’s laser beam at a mirror or other highly-reflective  
surface.  
• Keep the remote away from young children.  
• Never view the remote’s laser beam using telescopic devices, such as a  
microscope or binoculars.  
Press and hold for 3 seconds to turn off the remote.LED  
ring will shut off.  
Blank screen button  
Slide show  
The screen will become blank/dark.  
Start - Press once to begin.  
2
3
Stop - Press and hold for 2 seconds to stop the slide  
show.  
• Any attempt to disassemble, adjust or repair the remote may result in exposure  
to laser light or other safety hazards.  
Page Forward/Next slide  
Press once to go to next slide.  
4
5
Page  
Press once to go back one slide.  
Backward/Previous slide  
Laser pointer  
LED light ring  
Laser light is emitted from the opening.  
Power and KeyLockTM indicator.  
Troubleshooting  
6
7
What do I do if the response time of the remote is slow or it intermittently  
stops working?  
Press once to enable KeyLock function.  
- Disables all keys except the laser, page forward/next  
slide and page backward/previous slide buttons.  
- LED ring will become RED.  
• Make sure that the remote is within 50 feet (15 m) of the mini USB receiver and  
computer.  
• Increase the distance between the remote’s receiver and the base units of other  
wireless devices.  
Turn off any wireless devices and their base units that are near the remote’s  
receiver.  
• Replace the battery.  
KeyLock button  
8
9
Press once to disable the KeyLock function.  
- LED ring will return to GREEN.  
Laser pointer button  
Press and hold to activate the laser pointer.  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Targus Laser Presentation Remote  
Targus Laser Presentation Remote  
One Year Warranty  
Technical Support  
1. Targus warrants to the original purchaser that its products are free from defects in materials  
and workmanship for one year. This warranty is limited to defects, materials and workmanship.  
2. The benefits to the consumer given by the warranty are in addition to other rights and  
remedies of the consumer under law in relation to the goods to which the warranty relates. 3.  
The warranty is given by (i) Targus Australia, (ii) Targus Australia’s business address is: 117-119  
Bowden Street, Meadowbank, NSW 2114 Australia, (iii) Targus Australia’s telephone number is  
1800 641 645, Email: [email protected] (iv) To make a warranty claim for goods purchased  
in New Zealand, the telephone number is: 0800 633 222, or the goods may be returned to  
the supplier in New Zealand. 4. What the purchaser must do to entitle the purchaser to claim  
warranty:- (i) The purchaser must call the telephone number for Australia or New Zealand set  
out above, (ii) The purchaser must provide the purchaser’s name, daytime contact number,  
business hours delivery address, the Targus model number on the product, date and place  
of purchase with receipt for purchase if required, and describe the fault condition. 5. What  
Targus must do:- (i) Targus will provide the purchaser with store return information or a return  
authorisation so that the purchaser may return the product for warranty inspection, (ii) If after  
inspection Targus finds the product is defective in materials or workmanship, Targus shall  
replace (or repair) the defective product at the discretion of Targus and ship the product from  
Targus warehouse at its expense within three business days (Monday to Friday excluding public  
holidays) of receiving the returned goods. If the product is no longer available Targus reserves  
the right to replace with the nearest corresponding product of no lesser quality, (iii) Targus will  
bear the cost of return delivery to the purchaser regardless of the inspection test result. The  
purchaser must bear the cost of the delivery to Targus. There is no charge for inspection. 6.  
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.  
You are entitled to a replacement or refund for a major failure and for compensation for any  
other reasonable foreseeable loss or damage.You are also entitled to have the goods repaired  
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a  
major failure. 7. Please note: (i) Features and specifications of all Targus products are subject to  
change without notification, (ii) In some instances: Goods presented for repair may be replaced  
by refurbished goods of the same type rather than being repaired. Refurbished parts may be  
used to repair the goods, (iii) If goods accepted for repair retain user-generated data: During  
the process of repair some or all of your stored data may be lost. Please ensure that you have  
saved this data elsewhere prior to repair.  
For technical questions, please visit:  
US  
Australia  
Telephone: 1800-641-645  
New Zealand  
Telephone: 0800-633-222  
Product Registration  
Targus recommends that you register your Targus accessory shortly after purchasing  
it. Go to:  
You will need to provide your full name, email address, country of residence and  
product information.  
Regulatory Compliance  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and (2)  
This device must accept any interference received, including interference that may  
cause undesired operation.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Targus Laser Presentation Remote  
Targus Laser Presentation Remote  
FCC Statement  
Tested to Comply  
This equipment has been tested and found to comply with the limits of a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in  
a
residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy and if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna;  
• Increase the separation between the equipment and receiver;  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected;  
• Consult the dealer or an experienced radio/TV technician for help.  
AVOID EXPOSURE — HAZARDOUS ELECTROMAGNETIC RADIATION EMITTED FROM THIS  
APERTURE.  
LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL  
INSTRUMENTS. CLASS 2 LASER PRODUCT.  
NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY,  
AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE  
FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A  
PERSON’S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT  
OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME  
MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY  
SUCH AS DRIVING.  
Changes or modifications not authorized by the party responsible for compliance  
CAUTION: ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY  
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE  
EQUIPMENT.  
could void the user’s authority to operate this product.  
THIS DEVICE AND ITS ANTENNA(S) MUST NOT BE CO-LOCATED OR OPERATING IN  
CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER. YOUR DEVICE CONTAINS  
A LOW POWER TRANSMITTER. WHEN DEVICE IS TRANSMITTED IT SENDS OUT RADIO  
FREQUENCY (RF) SIGNAL. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY  
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE  
THE EQUIPMENT.  
Declaration of Conformity  
Hereby, Targus, declares that this device is in compliance with the essential  
requirements and other relevant provisions of Directive 1999/5/EC.  
Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries.All trademarks and registered trademarks are the property of their respective owners.  
All rights reserved. Features and specifications are subject to change without notice. © 2012. Targus Group International,  
Inc. and Targus, Inc., Anaheim, CA 92806 USA  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Satellite Radio FT 902 User Manual
Sony Car Stereo System CDX 3250 User Manual
Sony Computer Drive CRX 160E User Manual
Sony DVD Player LBT D550 User Manual
Sony MP3 Player SRF MQ11 User Manual
Sony Network Card 274 User Manual
Sony Radio ICF M55 User Manual
StarTechcom Power Supply ATXPW300DELL User Manual
Sterling Refrigerator A0554831 User Manual
Sylvania CRT Television 6620LG User Manual