PARTS AND OPERATION MANUAL
WALK-BEHIND TROWEL
SCT36 AND SCT46
SERIES
MODEL #
SERIAL #
Revision #4 (04/02/07)
STOWCONSTRUCTIONEQUIPMENT
A DIVISION OF MULTIQUIP INC.
PARTS DEPARTMENT:
800-427-1244
POST OFFICE BOX 6254
FAX: 800-672-7877
CARSON, CA 90749
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
310-537-3700 • 888-252-SCT SERIES[888-252-7869]
FAX:310-537-1986 • FAX:800-556-1986
E-MAIL: [email protected] • WWW: stowmfg.com
800-478-1244
FAX:310-631-5032
P/N 21220
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL—TABLE OF CONTENTS
Here's How To Get Help ............................................ 3
Fuel Tank Asssembly .........................................74-75
Ignition Coil Asssembly ......................................76-77
Muffler Asssembly..............................................78-79
Piston Asssembly ...............................................80-81
Recoil Starter Asssembly...................................82-83
Gaskets ................................................................... 85
Engine Labels .................................................... 86-87
Table Of Contents ..................................................... 4
Parts Ordering Procedures ....................................... 5
Training Checklist ...................................................... 6
Daily Pre-Operation Checklist ................................... 7
Safety Message Alert Symbols .............................. 8-9
Rules For Safe Operation ..................................10-11
Operation And Safety Decals.................................. 12
Specifications (Trowel) ............................................ 13
Specifications (Engines).......................................... 14
Specifications (Trowel Weights) .............................. 14
General Information ................................................ 15
HONDA GX240K1QA2ENGINE
Air Cleaner Asssembly .......................................88-89
Camshaft Asssembly .........................................90-91
Carburetor Asssembly .......................................92-93
Control Asssembly ............................................. 94-95
Crankcase Cover Asssembly .............................96-97
Crankshaft Asssembly .......................................98-99
Cylinder Barrel Asssembly .............................100-101
Cylinder Head Asssembly ..............................102-103
Fan Cover Asssembly ....................................104-105
Flywheel Asssembly.......................................106-107
Fuel Tank Asssembly .....................................108-109
Ignition Coil Asssembly ..................................110-111
Muffler Asssembly..........................................112-113
Piston Asssembly ...........................................114-115
Recoil Starter Asssembly...............................116-117
Engine Labels ................................................118-119
SCT SERIESTROWEL
Controls and Components ...................................... 16
Basic Engine ........................................................... 17
Assembly and Installation ..................................18-19
Pre-Inspection ....................................................20-21
Initial Start-Up (Gasoline Engine) ......................22-23
Operation ................................................................ 24
Options.................................................................... 25
Maintenance (Engine)........................................26-27
Maintenance (Trowel)) .......................................28-32
Troubleshooting (Trowel) ...................................33-34
Troubleshooting (Engine)...................................34-35
Explanation of Codes in Remarks Column ............. 36
Suggested Spare Parts ........................................... 37
Decal Locator .....................................................38-39
Standard Handle Assembly ...............................40-41
4-Blade Spider Assembly...................................42-43
Gearbox Assembly............................................. 44-45
Guard Ring Assembly ........................................46-47
Stabilizer Ring Assembly ...................................48-49
Engines Assembly..............................................50-51
Blades & Adjustment Fixture Assembly. ............52-53
Honda GX340K1QAP2 Engine
Air Cleaner Assembly..................................... 120-121
Camshaft Assembly ....................................... 122-123
Carburetor Assembly ..................................... 124-125
Crankcase Cover Assembly........................... 126-127
Control Assembly ........................................... 128-129
Cylinder Barrel Assembly............................... 130-131
Cylinder Head Assembly................................ 132-133
Crankshaft Assembly ..................................... 134-135
Fan Cover Assembly ...................................... 136-137
Flywheel Assembly ........................................ 138-139
Fuel Tank Assembly ....................................... 140-141
Ignition Coil Assembly .................................... 142-143
Muffler Assembly ........................................... 144-145
Piston Assembly............................................. 146-147
Recoil Starter Assembly................................. 148-149
Engine Labels ................................................ 150-151
HONDA GX160K1QX2ENGINE
Air Cleaner Assy.................................................54-55
Camshaft Assy. ..................................................56-57
Carburetor Assy. ................................................58-59
Control Assy. ......................................................60-61
Crankcase Cover Assy. ......................................62-63
Crankshaft Assy. ................................................64-65
Cylinder Barrel Assy. ..........................................66-67
Cylinder Head Assy. ...........................................68-69
Fan Cover Assy. .................................................70-71
Flywheel Assy.....................................................72-73
Terms and Conditions of Sale Parts ..................... 152
PAGE 4 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— PARTS ORDERING PROCEDURES
When ordering parts,
please supply the following information:
❒
Dealeraccountnumber
❒
❒
❒
❒
❒
❒
Dealernameandaddress
Shipping address (if different than billing address)
Returnfaxnumber
Applicable model number
Quantity,part number and description of each part
Specifypreferredmethodofshipment:
✓
✓
✓
✓
✓
✓
FedEx or UPS Ground
FedEx or UPS Second Day or Third Day
FedEx or UPS Next Day
Federal Express Priority One
DHL
Note:Unlessotherwiseindicatedbycustomer, all
orders are treated as “Standard Orders”, and will
ship within 24 hours.We will make every effort to
ship “Air Shipments” the same day that the order is
received, if prior to 2PM west coast time. “Stock
Orders” must be so noted on fax or web forms.
Truck
Place Your Parts Order Via Web or Fax
For Even More Savings!
Here’s how to get help...
Please have the model and serial number
on hand when calling.
(Domestic USA Dealers Only)
STOW MAIN OFFICE
18910 Wilmington Ave.
Carson, CA 90746
800-421-1244
FAX: 310-537-3927
Extra Discounts!
All parts orders which include complete part numbers and
are received by our automated web parts order system, or
by fax qualify for the following extra discounts:
Email: [email protected]
Internet: www.stowmfg.com
Ordered
via
Standard
orders
Stock orders
SALES DEPARTMENT
310-661-4242
877-289-7869 (877-BUY-STOW)
PARTS DEPARTMENT
800-427-1244
310-537-3700
SERVICE DEPARTMENT
800-478-1244
310-537-3700
TECHNICAL ASSISTANCE
800-478-1244
($750 list and above)
Fax: 310-604-9237
Fax
3%
5%
10%
10%
Web
FAX: 800-672-7877
FAX: 310-637-3284
Special freight allowances
when you order 10 or more
line items via Web or Fax!**
FedEx Ground Service at no charge for freight
No other allowances on freight shipped by any other
carrier.
FAX: 310-537-4259
FAX: 310-631-5032
WARRANTY DEPARTMENT
800-421-1244, EXT. 279
310-537-3700, EXT. 279
**Common nuts, bolts and washers (all items under $1.00
list price) do not count towards the 10+ line items.
FAX: 310-537-1173
NOTE:DISCOUNTSARESUBJECTTOCHANGE
Direct TOLL-FREE access
to our Parts Department:
STOWCONSTRUCTIONEQUIPMENT
A DIVISION OF MULTIQUIP INC.
Toll-free nationwide — 800-427-1244
POST OFFICE BOX 6254
888-252-STOW[888-252-7869]
FAX:310-537-1986
CARSON, CA 90749
310-537-3700
FAX:800-556-1986
INTERNET:www.stowmfg.com
Toll-free FAX — 800-6-PARTS-7 (800/672-7877)
E-MAIL: [email protected]
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL—TRAINING CHECKLIST
TRAINING CHECKLIST
This checklist will lists some of the minimum requirements for
machine maintenance and operation. Please feel free to detach
it and make copies. Use this checklist whenever a new operator
is to be trained or it can be used as a review for more experienced
operator’s.
TRAINING CHECKLIST
DESCRIPTION
Read Operator’s Manual completely.
NO.
OK?
DATE
1
Machine layout, location of components, checking of engine and
gearbox fluid level.
2
3
4
Fuel system, refueling procedure.
Operation of controls (machine not running).
Safety controls, safety stop switch operation.
Emergency stop procedures.
Startup of machine.
5
6
7
8
Maneuvering.
9
Pitching.
10
11
12
13
Concrete finishing techniques.
Shutdown of machine.
Lifting of machine.
Machine transport and storage.
Operator _________________________________________ Trainee __________________________________________
COMMENTS:
PAGE 6 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— DAILY PRE-OPERATION CHECKLIST
DAILY PRE-OPERATION CHECKLIST
DAILY PRE-OPERATION CHECKLIST
Engine Oil Level.
1
2
3
4
5
Gearbox Fluid Level.
Condition of Blades.
Blade Pitch Operation.
Safety Stop Switch Operation.
COMMENTS:
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— SAFETY MESSAGE ALERT SYMBOLS
FORYOUR SAFETY AND THE SAFETY OF OTHERS!
HAZARD SYMBOLS
Safety precautions should be followed at all times when operating
this equipment. Failure to read and understand the Safety
Messages and Operating Instructions could result in injury to
yourself and others.
Lethal Exhaust Gases
Engine exhaust gases contain poisonous
carbon monoxide. This gas is colorless and
odorless, and can cause death if inhaled.
NEVER operate this equipment in a confined
area or enclosed structure that does not
provide ample free flow air.
NOTE
This Owner's Manual has been developed to provide
complete instructions for the safe and efficient operation
of the SCT SERIESWALK-BEHIND TROWEL. For
engine maintenance information, please refer to the
engine manufacturers instructions for data relative to its
safe operation.
Before using this WALK-BEHIND TROWEL, ensure
that the operating individual has read and
understands all instructions in this manual.
Explosive Fuel
Gasoline is extremely flammable, and its
vapors can cause an explosion if ignited. DO
NOT start the engine near spilled fuel or
combustible fluids. DO NOT fill the fuel tank
while the engine is running or hot. DO NOT
overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or
sparks from the ignition system. Store fuel in
approved containers, in well-ventilated areas
and away from sparks and flames. NEVER
use fuel as a cleaning agent.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure to
the operator, and are preceded by one of three words: DANGER,
WARNING, or CAUTION.
Burn Hazards
DANGER: You WILL be KILLED or
SERIOUSLY injured if you DO NOT follow
directions.
Engine components can generate extreme
heat. To prevent burns, DO NOT touch these
areas while the engine is running or
immediately after operations. NEVER
operate the engine with heat shields or heat
guards removed.
WARNING: You CAN be KILLED or
SERIOUSLY injured if you DO NOT follow
directions.
Rotating Parts
NEVER operate equipment with covers, or
guards removed. Keep fingers, hands, hair
and clothing away from all moving parts to
prevent injury.
CAUTION: You CAN be injured if you
DO NOT follow directions.
Potential hazards associated with trowel operation will be
referenced with "Hazard Symbols" which appear throughout
this manual, and will be referenced in conjunction with Safety
"Message Alert Symbols".
PAGE 8 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— SAFETY MESSAGE ALERT SYMBOLS
Accidental Starting
Respiratory Hazard
ALWAYS place the engine ON/OFF switch
in the OFF position, when the trowel is not
in use.
ALWAYS wear approved respiratory
protection.
Over Speed Conditions
Sight and Hearing hazard
NEVER tamper with the factory settings of the
engine governor or settings. Personal injury
and damage to the engine or equipment can
result if operating in speed ranges above
maximum allowable.
ALWAYS wear approved eye and hearing
protection.
Equipment Damage Messages
Other important messages are provided throughout this manual
to help prevent damage to your trowel, other property, or the
surrounding environment.
This walk-behind trowel, other
property, or the surrounding
environment could be damaged if
you do not follow instructions.
NOTE
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — RULES FOR SAFE OPERATION
■
NEVER touch the hot exhaust
manifold, mufflerorcylinder.Allow
these parts to cool before
servicing the trowel.
CAUTION:
Failure to follow instructions in this manual may
lead to serious injury or even death! This
equipment is to be operated by trained and
qualified personnel only! This equipment is
for industrial use only.
The following safety guidelines should always be used when
operating the SCT SERIESwalk-behind trowel.
■
■
HighTemperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with hot! components can cause serious burns.
SAFETY
■
DO NOT operate or service this equipment
before reading this entire manual.
The engine of this trowel requires an adequate free flow of
cooling air. NEVER operate the trowel in any enclosed or
narrow area where free flow
of the air is restricted. If the
air flow is restricted it will
cause serious damage to
the trowel's engine and
may cause injury to people.
Remember the trowel's
engine gives off DEADLY
carbon monoxide gas.
■
■
This equipment should not be operated by persons under 18
years of age.
NEVER operate the trowel without proper protective clothing,
shatterproof glasses, steel-toed boots and other protective
devices required by the job.
■
■
ALWAYS refuel in a well-ventilated area, away from sparks
and open flames.
ALWAYS use extreme caution when
working with flammable liquids. When
refueling, stop the engine and allow it to
cool.
■
■
■
NEVER operate this equipment when not feeling
well due to fatigue, illness or taking medicine.
NEVER operate the trowel under the
influence or drugs or alcohol.
■
NEVER smoke around or near the
machine. Fire or explosion could result from
fuel vapors, or if fuel is spilled on a hot!
engine.
NEVER use accessories or attachments, which are not
recommended by SCT SERIESfor this equipment. Damage
to the equipment and/or injury to user may result.
■
■
■
Manufacture does not assume responsibility for any accident
due to equipment modifications.
■
■
NEVER operate the trowel in an explosive atmosphere or
near combustible materials. An explosion or fire could result
causing severe bodily harm or even death.
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult to read.
Topping-off the fuel tank filler port is dangerous, as it tends to
spill fuel.
ALWAYS check the trowel for loosened screws, nuts, or bolts
before starting.
PAGE 10 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — RULES FOR SAFE OPERATION
■
■
■
■
■
■
DO NOT operate this trowel unless all guards and safety
■
■
Keep the trowel in proper running condition.
devices are attached and in place. See Pages 16 and 17.
Make sure that there is no buildup of concrete, grease, oil or
debris on the trowel.
ALWAYS use proper lifting techniques when moving the
trowel.
■
■
■
Fix damage to the trowel immediately and always replace
broken parts.
ALWAYS check to make sure that the operating area is clear
before starting the engine.
Dispose of hazardous waste properly. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.
ALWAYS test the safety safety stop switch devices before
operating the trowel.
High Temperatures – Allow the machine and engine to
cool before adding fuel or performing service and
maintenance functions. Contact with hot! components can
cause serious burns.
NEVER place your feet or hands inside the guard rings
while starting or operating this equipment.
AVOID wearing jewelry or loose fitting clothing that may snag
on the controls or moving parts, this can cause a serious
injury.
■
ALWAYS keep clear of rotating or moving parts while
operating the trowel.
CAUTION
Emergencies
■
■
NEVER leave the machine unattended while running.
■
ALWAYS know the location of the nearest
Moving Parts – Shut down the engine before performing
service or maintenance functions. Contact with moving parts
can cause serious injury.
fire extinguisher and first aid kit. Know
the location of the nearest telephone. Also
know the phone numbers of the nearest
ambulance, doctor and fire department.
This information will be invaluable in the
case of an emergency.
Maintenance Safety
■
■
■
■
■
Disconnect the spark plug wires before attempting any type
of service.
Securely support any machine components that must be
raised.
NEVER lubricate components or attempt service on a running
machine.
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — OPERATION AND SAFETY DECALS
Machine Safety Decals
The SCT SERIESwalk-behind trowel is equipped with a number of safety decals.These decals are provided for operator safety and
maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals
become unreadable, replacements can be obtained from your dealer.
Figure 1. SCT SERIESTrowel Decals
PAGE 12 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — SPECIFICATIONS (TROWEL)
SideView
Top View
Figure 2. SCT SERIESTrowel Dimensions
Table 1. STOW Trowel Specifications
MODEL
SCT36
SCT46
A– Height (Lifting Hook)
B– Height Engagement Lever)
36.7 in. (931.6 mm)
41.4 in. (1,044.2 mm)
36.5 in. (927.1 mm)
34.5 in. (876.2 mm)
41.1 in. (1,044.2 mm)
46.0 in. (1,168.4 mm)
C–Width
70.5 in. (1,789.4 mm)
75.2 in. (1,910.1 mm)
D–Length
Weight – Operating
Sound Pressure1
SEE TABLE 3
94 db
97 db
2.5g (24.5 m/s2)
46 in. (117 cm)
4
1,290 fpm (6.5 m/s)
144 @ 3800 rpm
46 in. (116.84)
Vibration2
2.0g (19.6 m/s2)
36.5 in. (92.7 cm)
4
Ring Diameter
Number of Blades
Blade Tip Speed – FPM (m/s)
Rotor – RPM (Gasoline)
Path Width – in. (cm)
1,290 fpm (6.5 m/s)
144 @ 3800 rpm
36 in. (91.44 cm)
NOTE:
1.
2.
The vibration level indicated is the maximum RMS (Root
Mean Square) value obtained at the handle grip while
operating the walk-behind trowel on curing concrete in a
manner most often experienced in “normal” circumstances.
Values were obtained from all three axes of motion. The
values shown represent the maximum RMS value from
these measurements.
Sound pressure is a weighted measure. Measured at the
operators ear position while the walk-behind trowel is
operating at full throttle on concrete in a manner most often
experienced in “normal” circumstances. Sound pressure
may vary depending upon the condition of the concrete.
Hearing protection is always recommended.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— SPECIFICATIONS (ENGINES)
Table 2. Specifications (Engines)
Model
HONDA GX160QX2
HONDA GX240K1QA2
HONDA GX340K1QAP2
Air-cooled 4 stroke, Single
Cylinder, OHV, Horizontal Shaft
Gasoline Engine
Air-cooled 4 stroke, Single
Cylinder, OHV, Horizontal Shaft
Gasoline Engine
Air-cooled 4 stroke, Single
Cylinder, OHV, Horizontal Shaft
Gasoline Engine
Type
2.7 in. x 1.8 in.
(68 mm x 45 mm)
2.9 in. x 2.3 in.
(73 mm x 58 mm)
3.2 in. x 2.5 in.
(82 mm x 64 mm)
Bore X Stroke
Displacement
Max Output
9.9 cu-in. (163 cc)
5.5 H.P./4000 R.P.M.
14.81 cu-in. (242cc)
8.0 H.P./3600 R.P.M.
20.6 cu-in. (337cc)
11.0 H.P./3600 R.P.M.
Fuel Tank Capacity
Fuel
0.95 U.S. gal. (3.6 liters)
Unleaded Automobile Gasoline
0.63 U.S. qt. (0.60 liter)
1.59 U.S. gal. (6 liters)
Unleaded Automobile Gasoline
1.16 U.S. qt. (1.1 liters)
1.72 U.S. gal (6.5 liters)
Unleaded Automobile Gasoline
1.16 U.S. qt. (1.1 liters)
Lube Oil Capacity
Speed Control
Method
Centrifugal Fly-weight Type
Recoil Start
Centrifugal Fly-weight Type
Recoil Start
Centrifugal Fly-weight Type
Recoil Start
Starting Method
Dimension
(L x W x H)
12.0 x 14.3 x 13.2 in.
(304 x 362 x 335 mm)
14.0 x 16.9 x 16.1 in.
(355 x 430 x 410 mm)
15.0 x 17.7 x 17.4
(380 x 450 x 443 mm)
Dry Net Weight
33.1 lbs. (15.0 Kg)
55.1 lbs. (25 Kg)
68.4 lbs. (31 Kg)
Table 3. Specifications (Trowel Weights)
OPERATING WEIGHT
POWER SOURCE
MODEL
SCT36H55
SCT36H80
SCT46H80
SCT46H11
SHIPPING WEIGHT
230 lbs. (105 Kg)
254 lbs. (116 Kg)
292 lbs. (133 Kg)
355 lbs. (161 Kg)
(with handle)
5.5 HP Honda
8 HP Honda
8 HP Honda
11 HP Honda
190 lbs. (87 Kg)
214 lbs. (97 Kg)
242 lbs. (110 Kg)
295 lbs. (134 Kg)
PAGE 14 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— GENERAL INFORMATION
SCT SERIESWalk-BehindTrowel Familiarization
Blades
This walk-behind trowel is designed for the floating and
finishing of concrete slabs.
The blades of the trowel finish the concrete as they are rotated
around the surface. Blades are classified as combination
(8 inches wide), float (10 or 8 inches wide), and finish (6
inches wide). This trowel comes equipped with four blades
per rotor equally spaced in a radial pattern and attached to
vertical rotating shaft by means of a spider assembly.
Take a walk around the trowel. Take notice of all the major
components (see Figure 3, pages 16 and 17) like the engine,
blades, quick adjust control, (on those equiped models), air
cleaner, centrifugal stop switch etc. Check that there is always
oil in the engine.
Centrifugal Stop Switch
Read all the safety instructions carefully.Safety instructions will
be found throughout this manual and on the trowel. Keep all
safety information in good, readable condition. Operators should
be well trained on the operation and maintenance of the trowel.
In the event of a trowel runaway condition, (operator releases
the handle), a centrifugal stop switch will stop the engine
and bring the trowel to a halt.
Before using your trowel, test it on a flat watered down section of
finished concrete that is free of any debris and other objects.
CAUTION
This trial test run will increase your confidence in using the trowel
and at the same time it will familiarize you with the trowel’s
controls. In addition you will understand how the trowel handles
under actual conditions.
NEVER attempt to lift the trowel by yourself.
ALWAYS get the assistance of another
person to help lift the trowel or use a crane
or lifting device to move the trowel.
Engines
The 36" trowel is available with a 5.5 HP HONDA or an 8.0 HP
HONDA gasoline engine while the 46" trowel is available with
an 8.0 HP HONDA or an 11.0 HP HONDA gasoline engine.
Refer to the engine owner’s manual for instructions regarding
the operation and maintenance of your engine. The engine
manual is included with your trowel at the time of shipment.
Please contact your nearest Multiquip Dealer for a replacement
should the original manual disappear or become unusable.
Moving the SCT SERIESWalk-BehindTrowel
This walk-behind trowel is designed to be moved and handled
in several ways. One way to lift the trowel is to use an optional
lifting tube. See page 24, Figure 20. When using the lifting
tube, always use two persons to lift the trowel.
These models have a lifting bail installed so strap or chain can
be attached, allowing a forklift or crane to lift the trowel up onto a
slab of concrete. Use a lifting device of adequate lifting capacity
to lift the trowel.
Drive System
Power is transferred from the engine to the gearbox input shaft
via a V-belt or pulley drive system.The pulley engages using a
centrifugal clutch.
Training
For proper training, please use the “TRAINING CHECKLIST”
located in the front of this manual (Page 6). This checklist will
provide an outline for an experienced operator to provide training
to a new operator.
Gearbox
The gearbox is located beneath the engine and transfers power
to the rotor or spider assembly. The gearbox controls the
rotational speed of the trowel and is equipped with two shafts
(input and output).
Spider
The vertical output shaft of the gearbox connects to a cast hub
called the spider. The spider has 4 arms that extend outward
that are used for attachment of blades or other accessories.
Remember as the gearbox output shaft rotates so does the spider
assembly.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— CONTROLS AND COMPONENTS
Figure 3. SCT SERIESWalk-Behind Trowels
Figures 3 shows the location of the basic controls or components,
for the SCT SERIEStrowel. Listed below is a brief explanation of
each control or component
8.
9.
MainTube - Houses throttle control and pitch cables.
1.
Pitch Control -Turn this "StarWheel" clockwise for increase
blade pitch, and counter-clockwise for decrease blade pitch
Guard Ring- NEVER! put hands or feet inside guard ring.
10. V-Belt Cover – Remove this cover to gain access to theV-
2.
Hand Grip/Handle Bar – When operating the trowel, place
both hands on each grip to maneuver the trowel. Replace
hand grips when they become worn or damaged.
belt. NEVER operate the trowel with this cover removed.
11. Trowel Arm – NEVER operate the trowel with a bent, broken
or out of adjustment trowel arm. If the blades show uneven
wear patterns or some blades wear out faster than others,
the trowel arm may need to be adjusted. Use the trowel
arm adjustment tool P/N 1817 to adjust the trowel arms.
3.
4.
5.
Throttle – Controls engine speed.
Engine – This trowel uses a Honda gasoline engine.
Centrifugal Safety Stop Switch – In the event the operator
loses control of the trowel, this switch will shut-down the
engine.
12. Blades –This trowel is equipped with combination blades.
These blades are versatile and should take care of most
troweling needs. In addition float discs can be attached to
the trowel arms that will allow the trowel to float on "wet"
concrete.
6.
7.
Trowel Lifting Point – Use a hoist, forklift, or other suitable
lifting device to lift the trowel on and off the concrete slab.
Engine ON-OFF Switch– Turn to the "ON" position for
starting the engine and to the "OFF" position to prevent the
engine from starting.
13. Stabilizer Ring – Reduces trowel arm vibration. Helps
stabilize trowel arm.
PAGE 16 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— BASIC ENGINE
Figure 4. Engine Controls and Components
INITIAL SERVICING (ENGINE)
5. FuelValve Lever – OPEN to let fuel flow, CLOSE to stop
the flow of fuel.
The engine (Figure 4) must be checked for proper lubrication and
filled with fuel prior to operation. Refer to the manufacturers engine
manual for instructions & details of operation and servicing.
6. Choke Lever – Used in the starting of a cold engine, or in
cold weather conditions. The choke enriches the fuel
mixture.
1. Fuel Filler Cap – Remove this cap to add unleaded
gasoline to the fuel tank. Make sure cap is tightened
securely. DO NOT over fill.
7. Air Cleaner – Prevents dirt and other debris from entering
the air intake system. Remove wing-nut on top of air filter
cannister to gain access to filter element.
Operating the engine without an air
filter, with a damaged air filter, or a
filter in need of replacement will
DANGER
NOTE
allow dirt to enter the engine, causing
rapid engine wear
Adding fuel to the tank should be done only when
the engine is stopped and has had an opportunity
to cool down. In the event of a fuel spill, DO NOT
8. Spark Plug – Provides spark to the ignition system. Set
spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean
spark plug once a week.
attempt to start the engine until the fuel residue has been completely
wiped up, and the area surrounding the engine is dry.
9. Muffler – Used to reduce noise and emissions.
2. Throttle Lever – Used to adjust engine RPM speed (lever
advanced forward SLOW, lever back toward operator
FAST).
WARNING
3. Engine ON/OFF Switch – ON position permits engine
Engine components can generate extreme heat.
To prevent burns, DO NOT touch these areas
while the engine is running or immediately after
operating. NEVER operate the engine with the
muffler removed.
starting, OFF position stops engine operations.
4. Recoil Starter (pull rope) – Manual-starting method. Pull
the starter grip until resistance is felt, then pull briskly and
smoothly.
10. Fuel Tank – Holds unleaded gasoline. For additional
information refer to engine owner's manual.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — ASSEMBLY AND INSTALLATION
2. Connectthethrottlecabletotheengine.(Figure7). (Theair
cleanerhousingmayhavetoberemovedtoprovideaccess
Assembly and Installation
Before the trowel can be put into operation there are some
components that must be installed before the trowel can be used.
This section provided general instructions on how to install those
components.
for throttle cable installation.) When connecting the cable
housing, make sure that no more than 1/4" (6.4mm) of the
cable housing protrudes past the housing clamp on the
engine.
HandleTube Installation
1.
Install the handle tube to the gearbox as shown in (Figure 5).
The mounting hardware should be contained in the shipping
container.
Figure 7. Throttle Cable Connection
3.
4.
Tighten cable clamp screw.
After the cable has been installed on the engine, work the
throttle lever to verify the throttle cable is at the proper
length. Adjust the cable as necessary.
Figure 5. HandleTube Installation
Throttle Cable Installation
5.
Reinstall the air cleaner housing if previously removed.
1.
Set the throttle (Figure 6) to the idle position (lever away
from the operator).
Figure 6. Throttle
PAGE 18 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — ASSEMBLY AND INSTALLATION
Safety StopWire
Locate the SAFETY STOP wire protruding from the handle tube
(Figure 8) and connect it to the tail wire on the engine.Test the
safety stop switch to insure proper operation.
Figure 10. Blade Pitch Cable
2.
3.
4.
Remove one brass set nut from the blade pitch cable end
as shown in (Figure 10).
Thread the second brass set nut towards the cable as far
as possible.
Insert the cable end through the yoke eyelet (Figure 11)
Tighten the first brass set nut by hand to remove all the
slack from the cable.
Figure 8. Engine Safety Stop Wire Connection
Pitch Cable Installation
YOKE
THREAD CABLE END
THROUGH YOKE EYELET
TIGHTEN SECOND
BRASS SET NUT
AGAINST YOKE BOSS
USE A WRENCH TO
TIGHTEN FIRST BRASS
SET NUT AGAINST YOKE BOSS
Figure 9. "No Pitch" Position
Figure 11. CableYoke Attachment
1.
Expose the pitch cable to maximum by adjusting the handle
pitch to the "no pitch" position. On the standard model turn
the pitch control counter-clockwise, (Figure 9).
5.
6.
Using a wrench, tighten the second brass set nut up against
the yoke boss.This will lock the cable in place.
Use a wrench and finish tightening the first brass set nut up
against the yoke boss.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— PRE-INSPECTION
CAUTION
NEVER operate the trowel
in a confined area or
enclosed area structure
that does not provide
ample free flow of air.
ALWAYS wear approved eye and hearing
protection before operating the trowel.
Figure 12. Engine Oil Dipstick (Removal)
NEVER place hands or feet inside the guard
rings while the engine is running. ALWAYS
shut the engine down before performing any
kind of maintenance service on the trowel.
3. Insertandremovethedipstickwithoutscrewingitintothefiller
neck. Check the oil level shown on the dipstick.
4. Iftheoillevelislow(Figure13), filltotheedgeoftheoilfiller
holewiththerecommendedoiltype(Table4). Maximum oil
capacity is 400 cc.
It is recommended that the trowel's safety stop switch is used
to stop the engine after every use. Doing this will verify that the
switch is working properly and presents no danger to the operator.
Reference manufacturer engine
manual for specific servicing
instructions.
NOTE
Before Starting
1. Read safety instructions at the beginning of manual.
2. Cleanthetrowel,removingdirtanddust,particularlythe air
filterandcarburetor.
3. Check theairfilterfor dirtanddust. Ifairfilterisdirty,replace
air filter with a new one as required.
4. Check carburetor for external dirt and dust. Clean with dry
compressedair.
5. Checkfasteningnutsandboltsfortightness.
Figure 13. Engine Oil Dipstick (Oil Level)
Table 4. Oil Type
Engine Oil Check
1. Tochecktheengineoillevel,placethe trowelonsecurelevel
ground with the engine stopped.
Season
Summer
Spring/Fall
Winter
Temperature
25°C or Higher
25°C~10°C
Oil Type
SAE 10W-30
SAE 10W-30/20
SAE 10W-10
2. Remove the filler dipstick from the engine oil filler hole
(Figure 12) and wipe it clean.
0°C or Lower
PAGE 20 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL— PRE-INSPECTION
V-belt Check
Explosive Fuel
A worn or damagedV-belt can adversely affect the performance
of the trowel.If aV-belt is defective or worn simply replace theV-
belt as outlined in the maintenance section of this manual.
CAUTION
Blade Check
Motor fuels are highly flammable and can be
dangerous if mishandled. DO NOT smoke
while refueling. DO NOT attempt to refuel the
trowel if the engine is hot! or running.
Check for worn or damaged blades. Check to see if one blade is
worn out while the others look new.If this is the case there could
be a blade pitch problem. Refer to the maintenance section of
this manual for blade pitch adjustment procedure. Always replace
any worn or damaged blades.
Fuel Check
CONTROLS
1. Remove the gasoline cap located on top of fuel tank.
Safety Stop Switch
2. Visuallyinspecttoseeiffuellevelislow. Iffuelislow,replenish
with unleaded fuel.
This trowel has been equipped with a safety safety stop switch.
Safety stop switches should be tested every time the engine is
started.
3. When refueling, be sure to use a strainer for filtration. DO
NOT top-off fuel. Wipe up any spilled fuel.
NEVER! disable or disconnect the
safety stopswitch. It is provided for
NOTE
operator safety.Injury may result if it
is disable, disconnected or
improperly maintained.
NEVER! disable or disconnect the
NOTE
safety stopswitch. It is provided for
operator safety.Injury may result if it
is disable, disconnected or
improperly maintained.
CentrifugalType Safety Stop Switch
(Figure 15) The switching mechanism of this switch should
operatefreelyandshouldalwaysbekeptinthiscondition.With
the switch in the "OFF" position, the engine should not start or
run.Thepurposeofthisswitchistostoptheengineinarunaway
situation,(i.e.theoperatorreleasingthehandleduringoperation).
Gearbox Oil
1.
Determine if the gearbox oil is low by viewing the oil sight
glass/fill plug located on the side of the gearbox.This plug
will be marked by the "check" decal. See (Figure 14).The
correct level of the lubrication oil should be to the bottom of
the sight glass/fill plug.
GEARBOX
OIL SIGHT/
FILL PLUG
DRAIN
PLUG
Figure 15. Centrifugal Safety Stop Switch
Figure 14. Gearbox
2.
If lubrication oil cannot be seen in the sight glass, fill with
type ISO 680 (P/N 10139) gearbox lubricant oil until the oil
will show at the center of the oil sight glass when the
gearbox is level..
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIE STROWEL — INITIAL START-UP
This section is intended to assist the operator with the initial
CAUTION
start-up of the walk-behind trowel. It is extremely important that
this section be read carefully before attempting to use the trowel
in the field.
The trowel must be stabilized by the person
carrying the operator’s handle (Figure 16).
If it is not stabilized properly the handle may
swingaroundandflipthetrowel,thuscausing
damage to the trowel and bodily injury.
DO NOT use your trowel until this section is thoroughly
understood.
Lifting Bail
CAUTION
DO NOT attempt to operate the trowel until
A lifting bail is provided at an optimal lifting point for moving the
trowel. A hoist or forklift can be used to lift the trowel up onto a
concreteslab.Acranecanbeusedtoliftthetrowelontoabuilding.
the Safety, General Information and
Inspection sections of this manual have
been read and thoroughly understood.
Depending on engine manufacturer,
operating steps may vary. See engine
manufactures operating manual. The
following start-up procedure makes
reference to a HONDA Gasoline Engine
(Manual Start).
ExtracareMUST betakenwhenliftingthemachineofftheground.
Serious damage to the machine or personal injury could be
caused by dropping a trowel.
Starting the Engine
LIFTING THE TROWEL
1. Place the engine fuel valve lever (Figure 17) to the "ON"
position.
CAUTION
When lifting of the trowel is required always
use two people to lift the trowel onto a slab.
If another person is not available attach a
crane or lifting device to the trowel's lifting
bale.
With one person lifting from the main handle (Figure 16), and
anotherperson liftingfromthefrontoftheframe,liftthetrowelonto
a slab.
Figure 17. Engine FuelValve Lever
2. Make sure the throttle (Figure 18) is in the "idle" position.
Figure 16. Lifting theTrowel
Figure 17. Throttle (Idle Position)
PAGE 22 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — INITIAL START-UP
3. Placethecentrifugal safetystopswitch (Figure19)inthe
"ON"position.
CAUTION
NEVER disable or disconnect the centrifugal
safety stop switch. It is provided for the
operators’ safety and injury may result if it is
disabled, disconnected or improperly
maintained.
Figure 21. Starter Grip
6. If the engine has started, slowly return the choke lever
(Figure 20) to the "OPEN" position. If the engine has not
started repeat steps 1 through 5.
7. Before the trowel is placed into operation, run the engine for
several minutes. Check for fuel leaks, and noises that would
associate with a loose guard ring and/or covers.
Figure 19. Centrifugal Safety Stop Switch
8. To begin troweling, move the throttle lever (Figure 22) toward
the "RUN" position by pulling back toward the operator..
4. Place the Choke Lever (Figure 20) in the "CLOSED "
position.
Figure 22. Throttle (Run Position)
Figure 20. Engine Choke Lever
5. Grasp the starter grip (Figure 21) and slowly pull it out.The
resistancebecomesthehardestatapositioncorresponding
to the compression point. Pull the starter grip briskly and
smoothlyforstarting.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — OPERATION
The following steps are intended as a basic guide to machine
operation, and are not to be considered a complete guide to
concrete finishing. We suggest that all operators, (experienced
and novice), read “Slabs on Grade” published by the American
Concrete Institute, Detroit, Michigan. Read the “Training”
section of this manual for more information.
Maneuvering the Trowel
1. With a secure foothold and a firm grasp on the handles slowly
increase the engine speed until the desired blade speed is
obtained.
2. To maneuver the trowel, gently lift up on or press down on the
main trowel handle. To move the machine to the operator’s
left, lift up on the handle, to move machine to the right, push
down on the handle.
PITCHINGTHE BLADES
1. To pitch the blades upwards using the "Standard" handle,
(Figure23)simplyturnthestar-wheelclockwise.Turningthe
starwheelcounterclockwise willcausethebladestolayflat.
3. The best method for finishing concrete is to slowly walk
backwards (Figure 24) with the trowel, guiding the trowel
from side to side.This will cover all footprints on wet concrete.
4. Remember that if you let go of the trowel, just step away and
let the trowel come to a complete stop before trying to recover
the trowel.
5. Continuetopracticemaneuveringthetrowel.Trytopractice
as if you were finishing a slab of concrete. Practice edging
and covering a large area.
WARNING
Figure 23. Pitching the Blades
NEVER place your feet or hands inside the guard
rings while starting or operating this equipment.
ALWAYS keep clear of rotating or moving parts
while operating this equipment.
Figure 24 below illustrates a typical walk-behind trowel
application. Practice maneuvering the trowel.The trick is to let
the trowel do the work.
Figure 24. Maneuvering The Trowel
PAGE 24 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — OPTIONS
Clip-On Float Blades (Optional)
Blades
These blades will clip on to an existing installed blade, (Figure
27), allowing the finisher to "float" on “wet” concrete so that the
troweling operation can begin as early as possible. They can be
easily removed, so when the concrete is sufficiently cured, the
troweling operation can continue.
Blades should be changed when
they fail to finish concrete in a
satisfactory manner.
NOTE
Blades are a vital part of finishing concrete. This trowel, or
finisher, has been designed to finish concrete and the blades are
built to stringent quality standards out of the finest trowel steel. If
you need replacement blades, consult your parts list in this
manual for part numbers and order them from your Multiquip parts
dealer or importer.
Figure 27. Clip-On Float Blade
Float Discs (Optional)
Combo Blades
These round discs (Figure 28) attach to the spiders and allow the
machine to “float” on “wet” concrete.The disc design allows early
floating and easy movement from wet to dry areas.They are also
very effective in embedding large aggregates and surface
hardeners.
This trowel was equipped with combination float/finish (Figure
25) blades as original equipment. These blades have been
designed for optimum performance in both the floating and
finishing operations. These blades are versatile and should take
care of most troweling needs.
Figure 25. Combination Blade
Finish Blades (Optional)
Figure 28. Float Disk
These blades (Figure 26) have been specifically designed for
finish operations with this trowel. They will provide a premium
surface finishing capability from your trowel.They should only be
used after the concrete has set to the point where the trowel does
not sink into the concrete when placed on it.
Trowel Arm Adjustment Tool
If blades show uneven wear patterns or some tend to wear out
faster than others, the trowel arms may need to be adjusted. A
special tool P/N 1817, (Figure 29) is available that can be used
to adjust all of the trowel arms consistently.
See page 33 for Trowel Arm Adjustment procedures using this
tool.
Figure 26. Finish Blade
Figure 29.Trowel Arm Adjustment Fixture
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE (ENGINE)
QP40TH — MAINTENANCE (ENGINE)
Engine Maintenance
Perform engine maintenance procedures as referenced by
Table 5 below:
Table 5. Engine Maintenance Schedule
FIRST
EVERY
EVERY
EVERY
YEAR
OR
EVERY
2 YEARS
OR
MONTH 3 MONTHS 6 MONTHS
OR
DESCRIPTION (3)
OPERATION
BEFORE
OR
OR
10 HRS.
25 HRS.
50 HRS.
100 HRS.
200 HRS.
CHECK
CHANGE
CHECK
X
Engine Oil
X
X
X
Air Cleaner
All Nuts & Bolts
Spark Plug
CHANGE
X (1)
Re-tighten If
Necessary
CHECK-CLEAN
REPLACE
CHECK
X
X
X
Cooling Fins
Spark Arrester
Fuel Tank
CLEAN
X
X
CLEAN
Fuel Filter
CHECK
X
Idle Speed
CHECK-ADJUST
CHECK-ADJUST
CHECK
X (2)
Valve Clearance
Fuel lines
X (2)
Every 2 years (replace if necessary) (2)
(1) Service more frequently when used in DUSTY areas.
(2) These items should be serviced by your servic dealer, unless you have the proper tools and are mechanically
proficient. Refer to the HONDA shop Manual for service procedures
(3) For commercial use, log hours of operation to determine proper maintenance intervals.
Reference manufacturer engine
manual for specific servicing
instructions.
PAGE 26 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE (ENGINE)
DANGER :
Maintenance
Performtheenginemaintenanceproceduresasindicatedbelow:
DO NOT use gasoline as a cleaning solvent,
because that would create a risk of fire or
explosion.
DAILY
■
Thoroughly remove dirt and oil from the engine and control
area.Clean or replace the air cleaner elements as necessary.
Check and retighten all fasteners as necessary. Check the
spring box and bellows for oil leaks. Repair or replace as
needed.
ENGINEAIRCLEANER
1. Remove the air cleaner cover and foam filter element as
shown in Figure 32.
WEEKLY
■
Remove the fuel filter cap and clean the inside of the fuel
tank.
2. Tap the paper filter element (Figure 32) several times on a
hard surface to remove dirt, or blow compressed air [not
exceeding 30 psi (207 kPa, 2.1 kgf/cm2)] through the filter
elementfromtheaircleanercaseside.NEVER brushoffdirt.
Brushingwillforcedirtintothefibers.Replacethepaperfilter
element if it is excessively dirty.
■
■
Remove or clean the filter at the bottom of the tank.
Remove and clean the spark plug (Figure 30), then adjust
the spark gap to 0.028 ~0.031 inch (0.6~0.7 mm).This unit
has electronic ignition, which requires no adjustments.
3. Cleanfoamelementinwarm,soapywaterornonflammable
solvent. Rinseanddrythoroughly. Diptheelementinclean
engineoilandcompletelysqueezeouttheexcessoilfromthe
element before installing.
Figure 30. Spark Plug Gap
ENGINEOIL
1. Drain the engine oil when the oil is warm as shown in
Figure 31.
2. Remove the oil drain bolt and sealing washer and allow
the oil to drain into a suitable container.
3. Replace engine oil with recommended type oil as listed
in Table 4. DO NOT overfill. See Table 2 for oil capacity.
4. Install drain bolt with sealing washer and tighten se-
curely.
Figure 32. Engine Air Cleaner
Figure 31. Engine Oil (Draining)
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE
Trowel Arm Adjustment Procedure
See the engine manual supplied with
your machine for appropriate engine
maintenance schedule and
troubleshooting guide for problems.
NOTE
The following procedure should be
followed to adjust trowel arms when
it becomes apparent that the trowel
is finishing poorly or in need of
routine maintenance.
NOTE
At the front of the book (Page 7) there is a “Daily Pre-Operation
Checklist ”. Make copies of this checklist and use it on a daily
basis.
A level, clean area to test the trowel prior to and after is essential.
Any unlevel spots in the floor or debris under the trowel blades
will give an incorrect perception of adjustment. Ideally, a 5 x 5"
three-quarter inch thick flat steel plate should be used for testing.
CAUTION!
1. To determine which blades need adjustment, place the
trowelinthetestarea(three-quarterinchthickplate)andlook
for the following conditions:
ALWAYS allow the engine to cool before
servicing. NEVER attempt any maintenance
work on a hot! engine.
■
Pitch the blades as flat as possible and look at the
adjustment bolts.They should all barely make contact
with the lower wear plate on the spider. If you can see
that one of them is not making contact, some adjustment
will be necessary.
MAINTENANCE SCHEDULE
Daily (8-10 Hours)
■
Is the machine wearing out blades unevenly (i.e. one
blade is completely worn out while the others look new)?
1.
Check the oil level in the engine crankcase and gear box,
fill as necessary.
Figure 33 below illustrates a "worn spider bushings or bent
trowel arms". Check to see that adjustment bolt is barely
touching (0.10" max. clearance) lower wear plate. All alignment
bolts should be spaced the same distance from the lower wear
plate.
2.
CheckV-belt.
Weekly (50-60 Hours)
1.
2.
3.
Relube arms, thrust collar and clutch.
Replace blades if necessary.
Check and clean or replace the engine air filter as
necessary.
4.
Replace engine oil and filter as necessary, see engine
manual.
Monthly (200-300 Hours)
Figure 33. Worn Spider Plate
1.
Remove, clean, reinstall and relube the arms and thrust
collar.
Figure 34 below illustrates the "correct alignment " for a spider
plate (as shipped from the factory).
2.
Adjust the blade arms.
Yearly (2000-2500 Hours)
1.
Check and replace if necessary the arm bushings, thrust
collar bushings and shaft seals.
2.
3.
Check pitch control cables for wear.
Adjust blade speed.
Figure 34. Correct Spider Plate Alignment
PAGE 28 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE
2. Start engine, and bring trowel blades up to full speed and look
forthefollowingconditions:
b. Loosen the jam nut and cone point square head set
screw,andcarefullylifttheuppertrowelassemblyoff
ofthespiderassembly. Aslighttapwitharubbermallet
maybenecessarytodislodgethespiderfromthemain
shaftofthegearbox.
■
Does the trowel have a perceived rolling or bouncing
motion when in use?
■
Look at the trowel while it is running, does the guard
ring “rock up and down” relative to the ground?
c. If the trowel is equipped with an outer stabilizer ring
(Figure 36), remove the four bolts at the end of each
spiderarm.
Spider Removal
1. Onceitisdeterminedthatanadjustmentisrequired,remove
the spider assembly from the gearbox shaft as follows:
a. Locate the cone point square head set screw (Figure 35)
and attached jam nut found on the side of the spider
assembly.
Figure 36. Stabilizer Ring
d. Examinestabilizerringforoutofroundorbends.Ifring
isdamaged,replacering.Ifringisfoundtobecorrectwith
no damage, set aside.
Trowel Arm Removal
1. Each trowel arm is held in place at the spider plate by a hex
headbolt (zerkgreasefitting)andarollpin.Removeboththe
hex head bolt and the roll pin (Figure 37) from the spider
plate.
2. Remove the trowel arm from the spider plate.
Figure 35. Spider/Gearbox Removal
Figure 37. Removing Roll Pin
and Zerk Grease Fitting
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE
Trowel Arm FlatnessTest
3. Should the trowel arm inserts (bronze bushing ) come out
withthetrowelarm,removethebushingfromthetrowelarm
andset asideinasafeplace. If thebushingisretained inside
the spider plate, carefully remove the bushing.
1. Usingapieceof3/4inchthicksteelplateoranysurfacewhich
is true and flat, check all six sides of each trowel arm for
flatness.
4. Examinethebronzetrowelarmbushinginsert (Figure38),
andcleanifnecessary. Replacethebushingifout-of-round
orworn.
2. Check each of the six sides of the trowel arm (hex section
only) using a ten thousands of an inch (max.) feeler gauge
(Figure 40) between the flat of the trowel arm and an ex-
tremelyflat testsurface.
Figure 38. Bronze Bushings
Trowel Blade Removal
1. Removethetrowelbladesfromthetrowelarmbyremoving
thehexheadbolts(Figure39)fromthetrowelarm. The36"
modelwillhavetwohexheadboltsperarmandthe 46"model
will have three hex head bolts per arm. Set blades aside.
Figure 40. Trowel Arm FlatnessTest
3. If the trowel arm is found to be uneven or bent, replace the
trowelarm. Abenttrowelwillnotallowthetroweltooperate
in a smooth fluid rotation.
4. Next,checkeachofthesixsidesof theroundmachinedshaft
sectionofthetrowelarm.Eachsectionshouldhavethesame
clearance betweentheroundofthetrowelarmshaftandthe
testsurface.
Figure 39. Trowel Blades
2. Wirebrushanybuild-upofconcretefromallsixsidesofthe
trowel arm. Repeat this for the remaining three arms.
Trowel arms can be damaged by
rough handling or by striking
exposed plumbing or forms while in
operation. ALWAYS look-out for
objects which might cause damage
to the trowel arms.
NOTE
PAGE 30 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE
4. Loosenthelockingnutonthetrowelarmlever,thenturnthe
trowel arm adjusting bolt until it barely touches (.010") the
Trowel Arm Adjustment
Shown in Figure 41 is the adjustment fixture with a trowel arm
inserted. As each trowel arm is locked into the fixture, the arm bolt
is adjusted to where it contacts a stop on the fixture. This will
consistently adjust all of the trowel arms, keeping the finisher as
flat and evenly pitched as possible.
adjusting bolt on the fixture.
5. Afterthecorrectadjustmenthasbeenmade,tightenlocknut
on trowel arm lever to lock in place.
6. Loosen locking bolts on adjustment fixture, and remove
trowelarmfromfixture.
1. Locate the trowel arm adjustment tool P/N 1817. Set the
adjustmenttoolfora clock-wisebladerotation,meaningthe
fixture arm is in the "UP" position.
7. Repeat steps 2-7 for the remaining trowel arms.
Re-Assembly
1. Clean and examine the upper/lower wear plates and thrust
collar.Examine the entire spider assembly.Wire brush any
concreteorrustbuild-up.Ifanyofthespider componentsare
found to be damaged or out of round, replace them.
2. Makesurethatthebronzetrowelarmbushingisnotdamage
oroutofround.Cleanthebushingifnecessary.Ifthebronze
bushing is damage or worn, replace it.
3. Reinstall bronze bushing onto trowel arm.
4. Repeat steps 2 -3 for each trowel arm.
5. Makesurethatthespringtensionerisinthecorrectposition
to exert tension on the trowel arm.
6. Insertalltrowelarmswithleversintospiderplate(withbronze
bushingalreadyinstalled)usingcaretoaligngreaseholeon
bronze bushing with grease hole fitting on spider plate.
7. Lock trowel arms in place by tightening the hex head zerk
grease fitting and jam nut.
8. Re-install the blades back onto the trowel arms.
9. Install stabilizer ring onto spider assembly.
10. Reinstall lower wear plate, thrust collar and upper wear
ringinthereverse order thattheyweredis-assembledonto
the spider shaft. Make sure that there is little or no lateral
movement between the thrust collar and the spider shaft.
11. Carefully lift the upper trowel assembly, line up the key-
Figure 41. Trowel Arm AdjustmentTool
wayongearboxmainshaftandinsertintospiderassembly.
2. Un-screwthelockingboltsontheadjustmenttool,andplace
thetrowelarmintotheadjustmentfixturechannelasshown
inFigure43. Athinshimmayberequiredtocovertheblade
holes on the trowel arm. Make sure to align the trowel
adjustmentboltwiththefixtureadjustmentbolt.
12. Reinstall square head cone point into spider plate and
tighten in place.Tighten jam nut. Use care in making sure
point of set screw engages groove in gear box main shaft.
13. Lubricate all grease points (zerk fittings) with premium
"Lithum 12" based grease, conforming to NLG1 Grade #2
consistency.
3. Using an allen wrench, tighten the locking bolts on the
adjustment tool and securely lock the trowel arm in place.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — MAINTENANCE
V-Belt Inspection and Replacement
Testing
Inspect the v-belt for wear, fraying and deteriorization. Replace
with the appropriate size belt as follows:
1. Place trowel in test area, start engine and test trowel for
smoothness.
5.5 HP Models: P/N 01390
2. If trowel bounces has excessive vibration or does not run
smoothlyrepeatalignmentprocedure.
8 HP Models: P/N 01243
11 HP Models: P/N 01523
To remove and replace the v-belt:
Changing a Blade
1. Removethebeltguardbyremovingthe3hexheadscrews,
starwashersandflatwashers.
Itisrecommendedthatallthebladesbechangedatthesame
time. The machine may wobble or bounce if only some of the
blades are changed at one time.
2. Slip the belt up and over the top of the clutch assembly.
1. Place the machine on a flat, level surface. Adjust the blade
pitchcontroltomakethebladesasflataspossible.Notethe
blade orientation on the trowel arm.
3. Installthenewbeltandre-installthebeltguard. (Noadjust-
ment is necessary on the v-belt.)
Before removing the blades,
please note the orientation of the
blade on the trowel arm
NOTE
1. Remove the three bolts and lock washers that secure the
blade to the trowel arm. Remove the blade.
2. Usingawirebrush,scrapeallconcreteparticles andforeign
debris from the trowel arm.
3. Install the new trowel blade onto the trowel arm. Make sure
blade is installed correctly, maintaining the proper orienta-
tion for direction of rotation.
4. Reinstall the three bolts and lock washers that secure the
blade to the trowel arm.Tighten all three bolts securely.
5. Repeat steps 1-4 for all remaining blades.
PAGE 32 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — TROUBLESHOOTING (TROWEL)
TABLE 6. TROWEL TROUBLESHOOTING
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
Make sure that the Safety Stop Switch is ON or replace switch if
necessary.
Safety Stop Switch malfunction?
Engine running rough or not at
all.
Look at the fuel system. Make sure there is fuel being supplied to
the engine. Check to ensure that the fuel filter is not clogged.
Fuel?
Check to ensure that the ignition switch has power and is
functioning correctly.
Ignition?
Other problems?
Consult engine manufacturer’s manual.
Check wiring. Replace as necessary.
Loose wire connections?
Safety Stop Switch not
functioning.
Bad contacts?
Replace switch.
Make certain blades are in good condition, not excessively worn.
Finish blades should measure no less than 2" (50mm) from the
blade bar to the trailing edge, combo blades should measure no
less that 3.5" (89mm). Trailing edge of blade should be straight
and parallel to the blade bar.
Blades?
Check that all blades are set at the same pitch angle as
measured at the spider. A field adjustment tool is available for
height adjustment of the trowel arms (see Optional Equipment).
Spider?
Check the spider assembly for bent trowel arms. If one of the
arms is even slightly bent, replace it immediately.
Bent trowel arms?
If trowel “bounces, rolls
concrete, or makes uneven
swirls in concrete”.
Check the trowel arm bushings for tightness. This can be done by
moving the trowel arms up and down. If there is more than 1/8"
(3.2 mm) of travel at the tip of the arm, the bushings should be
replaced. All bushings should be replaced at the same time.
Trowel arm bushings?
Check the flatness of the thrust collar by rotating it on the spider.
If it varies by more than 0.02" (0.5 mm) replace the thrust collar.
Thrust collar?
Check the thrust collar by rocking it on the spider. If it can tilt
more than 3/32" (2.4 mm) [as measured at the thrust collar O.D.],
replace the bushing in the thrust collar.
Thrust collar bushing?
Thrust bearing worn?
Check the thrust bearing to see that it is spinning free. Note:
Thrust cap, replace if necessary.
The main output shaft of the gearbox assembly should be
checked for straightness. The main shaft must run straight and
cannot be more than 0.003" (0.08 mm) out of round at the spider
attachment point.
Main shaft?
Machine has a perceptible
rolling motion while running.
Check to make sure that both fingers of the yoke press evenly on
the wear cap. Replace yoke as necessary.
Yoke?
Check to ensure that each blade is adjusted to have the same
pitch as all other blades. Adjust per maintenance section in
manual.
Blade Pitch?
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — TROUBLESHOOTING (TROWEL)
TABLE 6. TROWEL TROUBLESHOOTING (CONTINUED)
SYMPTOM
POSSIBLE PROBLEM
Worn V-belts?
SOLUTION
Replace V-belt.
Dirty centrifugal clutch?
Disassemble and clean clutch.
Replace entire clutch.
Defective or worn out
centrifugal clutch?
Sluggish response to engine
speed change.
Rotate input shaft by hand. If shaft rotates with difficulty, check
the input and output shaft bearings. Replace as necessary.
Worn bearings in gearbox?
Worn or broken gears in
gearbox?
Verify that the gearbox shaft rotates when the input shaft is
rotated. Replace both the worm and worm gear as a set.
TABLE 7. ENGINE TROUBLESHOOTING
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
Operation not satisfactory
Governor adjustment improper?
Governor spring defective?
Fuel flow erratic?
Adjust governor to correct lever.
Clean or replace ignition.
Check fuel line.
Rotational speed fluctuates.
Air taken in through suction
line?
Check suction line.
Dust in rotating part?
Spring spring failure?
Clean recoil starter assembly.
Replace sprial spring.
Recoil starter not working
properly.
PAGE 34 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — TROUBLESHOOTING (ENGINE)
TABLE 7. ENGINE TROUBLESHOOTING (CONTINUED)
SYMPTOM
Difficult to start
POSSIBLE PROBLEM
SOLUTION
Ignition plug being bridge?
Carbon deposit at ignition?
Check ignition system.
Clean or replace ignition.
Replace insulators.
Fuel is available but spark plug
will not ignite. (Power available
at high tension cable).
Short circuit due to defective
insulators?
Improper spark gap?
Set spark plug gap to the correct gap.
Check stop switch circuit. Replace stop switch if defective.
Replace ignition coil.
Short circuit at stop switch?
Ignition coil defective?
Fuel is available but spark plug
will not ignite. (Power NOT
available at high tension cable).
Muffler clogged with carbon
deposits?
Clean or replace muffler.
Fuel is available and spark plug
ignites (compression normal).
Fuel in use inadequate (water,
dust)?
Flush fuel sytem and replace with fresh fuel.
Air Cleaner clogged?
Defective cylinder head gasket?
Cylinder worn?
Clean or replace air cleaner.
Tighten cylinder head bolts or replace head gasket.
Replace cylinder.
Fuel is available and spark plug
ignites (compression low ).
Spark plug loose?
Tighen spark plug.
Operation not satisfactory
Air cleaner clogged?
Air in fuel line?
Bleed (remove air) from fuel line.
Adjust carbureator float
Not enough power available
(compression normal, no miss-
firing).
Fuel level in carbureator float
chamber improper?
Carbon deposits in cylinder?
Ignition coil defective?
Clean or replace cylinder
Flush fuel sytem and replace with fresh fuel.
Replace ignition wires, clean ignition.
Flush fuel sytem and replace with fresh fuel.
Not enough power available
(compression normal, miss-
firing).
Ignition plug often shorts?
Fuel in use inadequate (water,
dust)?
Excessive carbon depostion in
combustion chamber?
Clean or replace crankcase.
Clean or replace muffler.
Engine overheats.
Exhaust or muffler clogged with
carbon.
Spark plug heat value incorrect? Replace spark plug with correct type spark plug.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and remarks
used in the Parts section of this manual. Use the help numbers
found on the back page of the manual if there are any questions.
QTY. Column
Numbers Used - Item quantity can be indicated by a number,
a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other parts
that are sold in bulk and cut to length.
The contents and part numbers listed in the parts section are
subject to change without notice. Multiquip does not
guarantee the availibility of the parts listed.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.
REMARKS Column
Sample Parts List:
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed to
describe the item can also be shown.
1
2
2
3
4
12345
BOLT ....................... 1.... INCLUDES ITEMS W/
WASHER, 1/4 IN. ........... NOT SOLD SEPARATELY
WASHER, 3/8 IN. .... 1.... MQ-45TONLY
HOSE .................... A/R.. MAKE LOCALLY
BEARING ................ 1.... S/N2345B AND ABOVE
*
*
*
12347
12348
12349
Assembly/Kit - All items on the parts list with the same unique
symbol will be included when this item is purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
NO. Column
Unique Symbols - All items with same unique symbol
Serial Number Break - Used to list an effective serial number
range where a particular part is used.
( , #,
+
, %, or >) in the number column belong to the same
*
assembly or kit, which is indicated by a note in the “Remarks”
column.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Duplicate Item Numbers - Duplicate numbers indicate
multiple part numbers are in effect for the same general item,
such as different size saw blade guards in use or a part that
has been updated on newer versions of the same machine.
Specific Model Number Use - Indicates that the part is used
only with the specific model number or model number variant
listed. It can also be used to show a part is NOT used on a
specific model or model number variant.
When ordering a part that has more
than one item number listed, check
the remarks column for help in
determining the proper part to order.
NOTE
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” - Indicates that the part can be
purchased at any hardware shop or made out of available
items. Examples include battery cables, shims, and certain
washers and nuts.
PART NO. Column
Numbers Used - Part numbers can be indicated by a number,
a blank entry, orTBD.
TBD (To Be Determined) is generally used to show a part that
has not been assigned a formal part number at time of
publication.
“Not Sold Separately” - Indicates that an item cannot be
purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available for
sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will be
clarified in the “Remarks” Column.
PAGE 36 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — SUGGESTED SPARE PARTS
HONDA ENGINES
SCT SERIESTROWEL 1 TO 3 UNITS
Qty......... P/N.............................. Description
1 to 3 Units
Qty......... P/N.............................. Description
3 ............ 20478 .................... GRIP
3 ............ 17210ZE1505 ....... AIR FILTER ELEMENT (GX160QX2)
3 ............ 17210ZE2505 ....... AIR FILTER ELEMENT (GX240K1QA2)
3 ............ 17210ZE3505 ....... AIR FILTER ELEMENT (GX340K1QAP2)
6 ............ 9807955846 .......... SPARK PLUG, BPR5ES, NGK
1 ............ 36100ZH7003 ....... SWITCH ASSEMBLY, ENG.STOP
1 ............ 17620ZH7023 ....... TANK CAP, FUEL FILLER
1 ............ 34150ZH7003 ....... OIL ALERT UNIT
1 ............ 28462ZH8003 ....... ROPE RECOIL GX160QX2
1 ............ 28462ZE2W11 ...... ROPE RECOIL GX240K1QA2
1 ............ 28462ZV7003 ....... ROPE RECOIL GX340K1QAP2
2 ............ 20856 .................... SAFETY SWITCH
1 ............ 20285 .................... PITCH CONTROLCABLE
1 ............ 20514 .................... SAFETY STOP WIRE
1 ............ 30033-401 ............ THROTTLE CABLE
4 ............ 1157 A .................. BUSHING
4 ............ 2828...................... ARM (11-3/4")
4 ............ 1162 A .................. LUBE CAP
4 ............ 12097 .................... SCREW
4 ............ 1456...................... NUT
4 ............ 1875...................... WASHER
4 ............ 1322...................... SCREW
1 ............ 21046 .................... GASKET KIT
1 ............ 21047 .................... BEARING KIT
1 ............ 1247...................... RUBBER GROMMET
1 ............ 1245...................... SPACER
1 ............ 10968 .................... THRUST COLLAR KIT
2 ............ 1390...................... BELT, A26 5.5 HP HONDA GX160QX2
3 ............ 0152-3 .................. BELT, A28, 8.0 &11.0 HP HAONDA
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — DECAL LOCATOR
NAMEPLATES AND DECALS
PAGE 38 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — DECAL LOCATOR
NAMEPLATE AND DECALS
NO.
1
PART NO.
PART NAME
QTY. REMARKS
NAMEPLATE.......................................................... 1 ....... CONTACT MULTIQUIP
.......................................................................................... PARTS DEPT.
2
30053-001
DECAL: SCT SERIESCONCRETE TROWEL
2
3
4
5
6
7
8
9
10
11
12
13
14
25349-001
30054-001
25264-001
11246
25265-001
11246
11246
11247
11246
25378-001
11246
DECAL: WARNING, GUARDS
DECAL: STOW
DECAL: CAUTION, OPERATING INSTR.
DECAL: ROTATION ............................................... 1 ....... PART OF DECAL KIT P/N 12620
DECAL: CAUTION, ROTATING BLADES
DECAL: GEAR DRIVE .......................................... 1 ....... PART OF DECAL KIT P/N 12620
DECAL: OIL CHECK ............................................. 1 ....... PART OF DECAL KIT P/N 12620
DECAL: HELMET, FOOT AND GLOVE ................. 1 ....... PART OF DECAL KIT P/N 12620
DECAL: HOT ......................................................... 1 ....... PART OF DECAL KIT P/N 12620
1
1
1
1
DECAL: CAUTION, SAFETY STRAPS
DECAL: LIFTING POINT ...................................... 1 ....... PART OF DECAL KIT P/N 12620
DECAL: BELT DRIVE ........................................... 1 ....... PART OF DECAL KIT P/N 12620
1
11246
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — STANDARD HANDLE
STANDARD HANDLE
4
19
5
8
15
3
20
DETAIL “A”
16
6
9
14
7
13
SEE
DETAIL “B”
2
18
19
20
SEE
DETAIL “A”
17
1
21
10
11
12
1
28
26
25
25
22
29
ASM
23
24
26
25
25
24
26
27
DETAIL “B”
CABLE LENGTH IS PRESET AND
ATTACHED TO THROTTLE LEVER
AT THE FACTORY. ORDERABLE
AS A UNIT ONLY.
1
30
PAGE 40 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — STANDARD HANDLE
STANDARD HANDLE
NO.
1
2
PART NO.
20478
21251
30115-001
1729
21248
3615
21282
21279
0122C
06827-006
10019
30033-401
0786
0786A
21249
20285
21250
20856
1602
20988
20514
21254
21150
0169
10136
10133
1493
PART NAME
QTY.
REMARKS
GRIP, HANDLE
2
1
1
1
1
1
1
HANDLE
3
HAND WHEEL, PITCH CONTROL
PIN, ROLL 3/16 X 1-1/4
BEARING, TROWEL CONTROL
COLLAR, SET 3/4 ID
SHAFT, PITCH CONTROL
HAND WHEEL ASSEMBLY, PITCH CONTROL......1...INCLUDES ITEMS W/
SCREW, SHS 3/8-16 X 1/2
SCREW, RHM 10-32 X 3/8
NUT, NYLOC 10-32
LEVER, THROTTLE ASSEMBLY
SCREW, BHC 1/4- 20 X 3/8 NYL PATCH, NP
SPACER, .360 X 17/64 X 1/8L
SLIDE BLOCK, TROWEL CONTROL
CABLE, PITCH CONTROL
BLOCK SUPPORT
SWITCH ASSEMBLY, SAFETY STOP
SCREW, RHM 10-24 X 3/8....................................1...INCLUDES ITEMS W/#
SCREW, FHSC PHILLIPS 8-32 X 1 1/4
WIRE ASSEMBLY, SAFETY STOP SWITCH
HANDLETUBE
*
4
*
5
*
6
*
7
*
8
*
9
*
1
2
2
1
1
1
1
1
1
1
*
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
#
#
1
1
1
1
2
4
4
1
1
1
2
HANDLE ASSEMBLY
SCREW, HHC 3/8-16 X 3.0
WASHER, FLAT 3/8 SAE
NUT, NYLOC 3/8-16
SCREW, HHC 3/8-16 X 3 1/4
GROMMET, 1/4 X .875ID X 1-5/8OD
BUSHING
1247
1245
1116
NUT, BRASS JAM 5/16-18
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — 4-BLADE SPIDER ASSY.
4 BLADE SPIDER ASSY.
PAGE 42 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — 4-BLADE SPIDER ASSY.
4 BLADE SPIDER ASSY.
NO.
PART NO. PART NAME
QTY.
1
1
REMARKS
1
12208
12778
10793
1471
WEAR RING
*
2
3
FLANGE BEARING
*
THRUST COLLAR ............................................................. 1 ........... INCLUDES ITEMS W/#
*
4 #
THRUST COLLAR BUSHING
WEAR PLATE
BEARING INSERT
1
1
4
4
4
4
4
*
5
1154A
1157A
0164B
4164
*
6
%
7
%
RADIUS HEAD 3/8- 16 x 1-1/4”
ROLL PIN 5/16 x 1-3/4”
JAM NUT 3/8- 16
8
%
9
%
1876
10
11
11
12
12
13
14
15
16
17
18
19
20
21
22
23
%
%
%
%
%
%
%
%
%
%
%
%
%
%
0166A
0105
LOCK WASHER 3/8”
SCREW, HHCS 5/16-18 X 1-1/2........................................ 8 ........... 36" MODELS
SCREW, HHCS 5/16-18 X 1-1/2...................................... 12 ........... 46" MODELS
WASHER, LOCK 5/16 ....................................................... 8 ........... 36" MODELS
WASHER, LOCK 5/16 ..................................................... 12 ........... 46" MODELS
0105
0161C
0161C
2828
TROWEL ARM 11-3/4
4
4
4
1
1
4
4
4
1
1163
TROWEL ARM LEVER
SPRING (RIGHT HAND)
HEX NUT 3/8-16
1316
1456
12097
1322
1162A
1875
1161
SCREW, SQHS 3/8-16 x 1-3/4” CONE POINT
RETAINING SCREW ASSY.
CAP, GREASE ZERK
INT. SHKP. WASHER 3/8”
SPIDER PLATE ONLY
21261
10968
SPIDER PLATE ASSEMBLY ............................................ 1 ........... INCLUDES ITEMS W/
THRUST COLLAR KIT ...................................................... 1 ........... INCLUDES ITEMS W/
%
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — GEARBOX ASSY.
GEARBOX ASSY.
12
1
2
1
13
34
8
7
3
35
4
5
4
36
6
11
7
9
7
6
14
2
10
15
16
17
18
32
31
30
19
6
X
O
B
G
E
AR
I
20
19
18
QTY. 1
33
GEARBOX REQUIRES
22 OZ. OF LUBRICATING
OIL FOR OPERATION.
GEARBOX ASSEMBLY
32
37
31
38 GASKET/SEAL KIT
22
23
BEARING KIT
39
21
APPLY THREAD LOCK (LOCTITE
242 BLUE OR EQUIVALENT).
1
24
5
APPLY SEALANT (LOCTITE
572 OR EQUIVALENT).
2
3
TORQUE TO 15 LB/FT.
SHIM AS NECESSARY
FOR 0.005 TO 0.010
INTPUT SHAFT ENDPLAY.
4
5
25
26
SHIM AS NECESSARY
FOR 0.000 TO 0.003
OUTPUT SHAFT ENDPLAY.
USE SPECIALLY FORMULATED
WHITEMAN GEARBOX LUBRICANT
P/N 10139 OR ISO 680 OIL.
29
6
7
27
28
GUARD RING.
3
PAGE 44 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — GEARBOX ASSY.
GEARBOX ASSY.
NO.
PART NO.
0753
PART NAME
QTY.
1
4
1
1
1
1
1
1
1
2
2
1
1
1
1
4
4
2
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
2
2
1
4
1
3
REMARKS
1%
SEAL, OIL NATIONAL #470954
SCREW, HHC 1/4-20 X 3/4
FLANGE, INPUT SHAFT
*
2%
3%
4%
5%
0131A
12876
20395
20397
20398
20399
20400
20401
20466
20465
0627
RING, O -139 BUNA N
*
*
SHIM, INPUT 0.002 THICK
SHIM, INPUT 0.003 THICK
SHIM, INPUT 0.005 THICK
SHIM, INPUT 0.010 THICK
SHIM, INPUT 0.020 THICK
BEARING, CUP, TIMKEN #LM11910
BEARING, CONE, TIMKEN #LM11949
KEY, SQUARE 3/16 X 1 1/4
GEAR, WORM & SHAFT ASSY.
CASE, GEAR
6%#
7%#
8%
9%
1851
10%
11%
12
12874
21218
1394
VENT, AIR
SCREW, FHSC 3/8 - 16 X 1
WASHER, C/S EXT. SHKP, 3/8
SCREW, HHC 1/4-28 X 3/8
SIGHT GLASS, 3/4 M PIPE STEEL
FITTING, PLUG 3/8 MP SQ HEAD
RING, SNAP, TRUARC 5100-112
BEARING, CUP TIMKEN #M86610
BEARING, CONE TIMKEN #M86647
GEAR, WORM, BRONZE
SHAFT, OUTPUT
13
1480
14%
15%
16%
17%
18%# 20475
19%# 20474
20%
21%
22%
23
20476
21033
0121A
1138
1140
20470
1139
KEY, WOODRUFF #21 HARDENED
KEY, WOODRUFF #25
1238
24%
20402
20403
20404
20405
20406
20396
12875
10235
1146
SHIM, OUTPUT 0.002 THICK
SHIM, OUTPUT 0.003 THICK
SHIM, OUTPUT 0.005 THICK
SHIM, OUTPUT 0.010 THICK
SHIM, OUTPUT 0.020 THICK
RING, O -257 BUNA N
*
25%
26%
27%
28%
29%
30
31
32
33
34
35
36
37
38
*
COVER, GEARBOX
WASHER, C/S EXT. SHKP
SCREW, FHSC 5/16-18 X 1, NYLOC NP
SEAL, OIL, NATIONAL #470712
ARM, YOKE
RING, SNAP, TRUARC 5100-37 OR EQUIV.
SPACER, .50 OD X .40 ID X 0.25L
PIN, YOKE
SPACER, GEARBOX
SCREW, HHC 5/16-18 X 3/4
WASHER, FLAT 5/16 SAE
0254
1150
*
20802
20803
20801
16045
0655
0300B
21219
21046
21047
GEARBOX ASSY. ..................................................1.................. INCLUDES ITEMS W/%
GASKET SEAL KIT ...............................................1.................. INCLUDES ITEMS W/
BEARING KIT ........................................................1.................. INCLUDES ITEMS W/#
*
39
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — GUARD RING ASSY.
GUARD RING ASSY.
PAGE 46 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — GUARD RING ASSY.
GUARD RING ASSY.
NO.
PART NO.
21119
21122
PART NAME
QTY.
REMARKS
1
2
RING, STATIONARY GUARD, 36"
RING, STATIONARY GUARD, 46"
1
1
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — STABILIZER RING ASSY.
STABILIZER RING ASSY.
SEE DETAIL “A”
4
DETAIL “A”
3
1
2
1
APPLY LOCTITE 242 BLUE
OR EQUIVALENT.
1
PAGE 48 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — STABILIZER RING ASSY.
STABILIZER RING ASSY.
NO
1
2
3
PART NO
1237
0161C
21465-001
21471-351
PART NAME
QTY.
REMARKS
SCREW, SHC 5/16-18 X 3/4
WASHER, LOCK, 5/16 MED
FLANGE, BEARING
4
4
4
1
4
STABILIZER RING ASSEMBLY
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — ENGINES, 5.5 HP, 8 HP, 11 HP HONDA ASSY.
ENGINE, 5.5 HP, 8 HP, 11 HP HONDA ASSY.
PAGE 50 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — ENGINES, 5.5 HP, 8 HP, 11 HP HONDA ASSY.
ENGINE, 5.5 HP, 8 HP, 11 HP HONDA ASSY.
NO.
1
PART NO.
1386
PART NAME
QTY. REMARKS
ENGINE 5.5 HP HONDA GX160QX2
ENGINE 8 HP HONDA GX240K1QA2
ENGINE 11 HP HONDA GX340K1QAP2
HHCS 5/16-24 x 1-1/4"
1
1
1
4
4
4
1
1387
1
1388
2
1391
3
0161C
0300B
21293
30043-351
0627
LOCK WASHER 5/16"
4
FLAT WASHER 5/16"
5
LIFTING BAIL ................................................................... 1 ...5.5 HP MODEL
5
LIFTING BAIL ................................................................... 1 ...8 HP & 11 HP MODELS
6
KEY , SQUARE, 3/16 X 1-1/4
1
7
1834
DEFLECTOR, EXHAUST .................................................. 1 5.5 HP MODEL
SCREW, HHST 8-32 X 3/8 ................................................ 1 5.5 HP MODEL
8
1273
9
10229
0255
SCREW, HHCS 5/16-24 x 1/2
4
10
10
11
11
12
13
14
15
16
17
18
19
20
21
AUTO CLUTCH ASSY. 3/4" BORE 5.5 HP MODEL .......... 1 ...INCLUDES ITEMS W/
*
0250
AUTO CLUTCH ASSY. 1" BORE 8 &11 HP MODELS ...... 1 ...INCLUDES ITEMS W/#
BELT, A26 ......................................................................... 1 ...5.5 HP MODEL
BELT, A28 ......................................................................... 1 ...8 HP & 11 HP MODELS
1390
0152-3
30102-002
0948
BELT GUARD
1
3
3
3
1
1
1
WASHER, FLAT 1/4 SAE
WASHER, EXT SHKP 1/4
SCREW, HHC 1/4-20 X 3/4
WIRE, SAFETY SWITCH
CONNECTOR SPLICE
PULLEY, AK-54 X 3/4
10031
131A
1488
1475
21140
21141
21256
0256
SPACER, ENGINE MOUNT .............................................. 2 ...5.5 HP MODEL
SPACER, LIFT BAIL ......................................................... 4 ...5.5 HP MODEL
SPINDLE 3/4 BORE ......................................................... 1 ...5.5 HP MODEL
*
22 #
0251
CLUTCH HOUSING DRUM
CLUTCH HOUSUNG DRUM BUSHING
WEIGHT SET (INCLUDES 4 WEIGHTS)
SPRING
1
1
1
1
1
*
23 #
0458
*
24 #
0454
*
25 #
0855
*
26 #
0253
CLUTCH EXPANSION PLATE
*
27
1868
SHSS 3/8-24 X3/4" ........................................................... 1 ...5.5 HP MODEL
*
28 #
0456
BELT RUNNER (BEARING)
1
*
29#
0252
SPINDLE 1" BORE ........................................................... 1 ...8 HP & 11 HP MODELS
HSSS 3/8-24X1/2" ............................................................ 1 ...8 HP & 11 HP MODELS
30#
0457
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 51
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — BLADES & ADJUSTMENT FIXTURE ASSY.
(OPTIONS)
BLADES & ADJUSTMENT FIXTURE ASSY.
PAGE 52 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
SCT SERIESTROWEL — BLADES & ADJUSTMENT FIXTURE ASSY.
BLADES & ADJUSTMENT FIXTURE ASSY.
NO.
PART NO.
PART NAME
QTY. REMARKS
1
1
2
3
COMBO FLOAT & FINISH BLADE.......................... 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
ENDURO COMBO FLOAT &FINISH BLADE .......... 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
FLOAT BLADE........................................................ 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
FINISH BLADE ....................................................... 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
ENDURO FINISH BLADE W/ROTATING ................ 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
3
4
0201
0202
1434
GUARD RING LUG RING
4
4
4
5
HHCS 5/16-18X1" RING
6
TROWEL LUG (FINISH BLADE ONLY)
7
REVERSIBLE COMBO BLADE ............................... 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
UNIVERSAL MOUNTING BAR ............................... 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
SNAP PIN 1/4"X1.3/4" ............................................ 8 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
UNIVERSAL FINISH BLADE .................................. 4 ........ CONTACT UNIT SALES DEPT./ACCESSORY ITEM
ENDURO UNIVERSAL FINISH BLADE .................. 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
UNIVERSAL COMBO BLADE ................................. 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
ENDURO UNIVERSAL COMBO BLADE ................ 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
8
9
10
10
11
11
12
13
14
15
16
17
18
19
20
21
0487
0490
0489
0488
SHCS 3/8-16X1/2"
20
3
1
1
SHCS 7/16-14X1"
GRINDING DISC HUB
STONE MOUNT PLATE
GRINDING DISC ASSY. ......................................... 1 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
GRINDING DISC STONE ONLY ............................. 1 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
FLOAT DISC LATCH PIN ....................................... 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
FLOAT DISC........................................................... 1 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
GRINDING BRICK .................................................. 4 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
TROWEL ARM ADJ. FIXTURE ASSY. .................... 1 ......... CONTACT UNIT SALES DEPT./ACCESSORY ITEM
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 53
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — AIR CLEANER ASSY.
AIR CLEANER ASSY.
PAGE 54 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
PART NAME
QTY.
REMARKS
16271ZE1000
17210ZE1505
17218ZE1821
17230ZE1820
17232891000
17238ZE7010
17239ZE1000
17410ZE1020
90201415000
90325044000
GASKET, ELBOW
1
1
1
1
1
2
1
1
2
ELEMENT, AIR CLEANER (DUAL)
FILTER, OUTER
COVER, AIR CLEANER (DUAL)
GROMMET, AIR CLEANER
COLLAR, AIR CLEANER
COLLAR B, AIR CLEANER
ELBOW, AIR CLEANER
NUT, CAP 6MM
9
11
WINGNUT, TOOL BOX SETTING .......................... 1 ........... USE FROM ENGINE
SN 2836834
12
13
90325044000
957010602000
WINGNUT, TOOL BOX SETTING
BOLT, FLANGE 6 X 20 .......................................... 1 ........... USE FROM ENGINE
SN 3385102
1
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 55
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CAMSHAFT ASSY.
CAMSHAFT ASSY.
PAGE 56 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
2
3
4
PART NO.
PART NAME
CAMSHAFT ASSEMBLY
ROD, PUSH
ARM, VALVE ROCKER
LIFTER, VALVE ..................................................... 2 ........... USE UP TO ENGINE
SN 4252173
QTY.
REMARKS
14100ZE1812
14410ZE1010
14431ZE1000
14441ZE1000
1
2
2
4
5
6
7
8
9
10
11
12
13
14
15
14441ZE1010
14451ZE1013
14568ZE1000
14711ZF1000
14721ZF1000
14751ZF1000
14771ZE1000
14773ZE1000
14781ZE1000
14791ZE1010
90012ZE0010
90206ZE1000
LIFTER, VALVE
2
2
1
1
1
2
1
1
1
1
2
2
PIVOT, ROCKER ARM
SPRING, WEIGHT RETURN
VALVE, INTAKE
VALVE, EXHAUST
SPRING VALVE
RETAINER, INTAKE VALVE SPRING
RETAINER, EXHAUST VALVE SPRING
ROTATOR,VALVE
PLATE, PUSH ROD GUIDE
BOLT, PIVOT 8MM
NUT, PIVOT ADJ.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 57
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CARBURETOR ASSY.
CARBURETOR ASSY.
PAGE 58 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CARBURETOR ASSY.
CARBURETOR ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
■
%
1
2
3
#
+
16010ZE1812
16011ZE0005
16013ZE0005
16015ZE0831
GASKET SET
VALVE SET, FLOAT
FLOAT SET
1
1
1
*
*
4
CHAMBER SET, FLOAT............................... 1 ........... INCLUDES ITEMS/#
.................................................................................... USE FROM ENGINE
.................................................................................... SN BE65B B
*
5
16016ZH7W01
16024ZE1811
16028ZE0005
16044ZE0005
16100ZH8W51
16124ZE0005
16166ZH8W50
16173001004
16211ZE1000
16212ZH8800
16220ZE1020
16221ZH8801
16610ZE1000
16953ZE1812
16954ZE1812
SCREW SET
SCREW SET, DRAIN ................................... 1 ........... INCLUDES ITEM W/+
SCREW SET B ............................................ 1 ........... INCLUDES ITEM W/
CHOKE SET
CARBURETOR ASSEMBLY, BE65B B ........ 1 ........... INCLUDES ITEMS/
1
*
6
7
8
#
*
%
*
1
*
9
*
10
11
12
13
14
15
16
17
18
19
SCREW, THROTTLE STOP
NOZZLE, MAIN
O- RING
INSULATOR, CARBURETOR
GASKET, INSULATOR
SPACER, CARBURETOR
GASKET, CARBURETOR
1
1
1
1
1
1
1
*
*
*
LEVER, CHOKE STANDARD ....................... 1............ INCLUDES ITEM W/$
LEVER, VALVE
1
*
PLATE, LEVER SETTING............................ 1 ........... USE FROM ENGINE
.................................................................................... SN BE65B B
20
21
22
23
16956ZE1811
16957ZE1812
16967ZE0811
93500030060H
SPRING, VALVE LEVER
GASKET, VALVE
CUP, FUEL STRAINER
SCREW, PAN 3 X 6 ...................................... 2 ........... USE FROM ENGINE
.................................................................................... SN BE65B B
PIN, SPRING 2 X 12
JET, MAIN #65 (OPTIONAL)
JET, MAIN #68 (OPTIONAL)
JET SET, PILOT #35 .................................... 1 ........... INCLUDES ITEM W/
1
1
1
*
*
*
*
24$
9430520122
1
1
1
25
99101ZH80650
99101ZH80680
99204ZE00350
*
25
*
■
26
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 59
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CONTROL ASSY.
CONTROL ASSY.
PAGE 60 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CONTROL ASSY.
CONTROL ASSY.
NO.
2
PART NO.
16500ZH8823
PART NAME
QTY.
REMARKS
CONTROL ASSEMBLY, REMOTE......................... 1............ INCLUDES ITEMS W/
............................................................................................. USE FROM ENGINE
............................................................................................. SN 6331305
*
4
5
6
7
8
9
16551ZE0010
16555ZE1000
16561ZE1020
16562ZE1020
16571ZH8020
16574ZE1000
16575ZH8000
16576891000
16578ZE1000
16580ZH8812
ARM, GOVERNOR
ROD, GOVERNOR
SPRING GOVERNOR
SPRING,THROTTLE RETURN
LEVER, CONTROL
SPRING, LEVR
WASHER, CONTROL LEVER
HOLDER, CABLE
SPACER, CONTROL LEVER
BASE, CONTROL (REMOTE) ............................... 1............ USE FROM ENGINE
............................................................................................. SN 5551818TO 6331304
SPRING, CONTROL ADJUSTING
SPRING, CABLE RETURN
BOLT, FLANGE 6 X 12 (CT200)
BOLT, GOVERNOR ARM
NUT, SELF- LOCK 6MM
SCREW, PAN 5 X 25
1
1
1
1
1
1
1
1
1
*
*
10
*
11
*
12
*
13
*
14
16584883300
16592ZE1810
90013883000
90016ZE5010
90114SA0000
93500050250H
938930501600
9405006000
1
1
2
1
1
1
1
1
*
15
*
17
18
19
*
22
*
23
*
SCREW, WASHER 5 X 16
NUT, FLANGE 6MM
24
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 61
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
PAGE 62 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
1
3
4
5
9
10
PART NO.
PART NAME
QTY.
REMARKS
11300ZE1641
11381ZH8801
15600ZE1003
15600ZG4003
15625ZE1003
15625ZE1003
91202883005
9430108140
COVER ASSEMBLY, CRANKCASE (U- TYPE) ..... 1 ........... INCLUDES ITEMS W/
*
GASKET, CASE COVER (NON- ASBESTOS)
CAP ASSEMBLY, OIL FILLER
CAP ASSEMBLY, OIL FILLER
GASKET, OIL FILLER CAP
GASKET, OIL FILLER CAP
OIL SEAL 25 X 41 X 6
PIN A, DOWEL 8 X 14
BOLT, FLANGE 8 X 32
BEARING, RADIAL BALL 6205
1
1
1
1
1
1
2
6
1
11
12
13
*
957010803200
961006205000
14
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 63
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
PAGE 64 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
3
9
PART NO.
13310ZE1601
90745ZE1600
PART NAME
CRANKSHAFT, Q- TYPE
KEY, 4.78 X 4,78 X 38
QTY.
1
1
REMARKS
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 65
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
PAGE 66 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
2
3
PART NO.
PART NAME
QTY.
REMARKS
12000ZH8811
15510ZE1033
16510ZE1000
16511ZE1000
16512ZE1000
16531ZE1000
16541ZE1000
90131ZE1000
80451ZE1000
90601ZE1000
90602ZE1000
91001ZF1003
91202883005
91353671003
9405010000
CYLINDER ASSEMBLY, OIL ALERT .................... 1............ INCLUDES ITEMS W/
SWITCH ASSEMBLY, OIL LEVEL......................... 1 ........... INCLUDES ITEMS W/
GOVERNOR ASSEMBLY ...................................... 1............ INCLUDES ITEMS W/
*
%
#
4
*
5
6
8
#
#
WEIGHT, GOVERNOR
HOLDER, GOVERNOR WEIGHT
SLIDER, GOVERNOR
SHAFT, GOVERNOR ARM
BOLT, DRAIN PLUG
WASHER, THRUST 6MM
WASHER, DRAIN PLUG 10.2MM
CLIP, GOVERNOR HOLDER
BEARING, RADIAL BALL 6205
OIL SEAL 25 X 41 X 6
O- RING 13.5 X 1.5 (ARAI)
NUT, FLANGE 10MM
WASHER, PLAIN 6MM
PIN, LOCK 8MM
2
1
1
1
2
1
2
1
1
1
1
1
2
1
2
*
*
*
9
10
11
12
13
14
15
16
17
18
19
20
*
*
%
%
9410106800
9425108000
957010601200
*
BOLT, FLANGE 6 X 12
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 67
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
PAGE 68 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
12210ZH8000
12204ZE1306
12205ZE1315
12216ZE5300
12251ZF1800
12310ZE1010
12391ZE1000
15721ZH8000
90016ZE1000
90043ZE1020
90047ZE1000
9430110160
CYLINDER HEAD.................................................. 1............ INCLUDES ITEMS W/
*
2
*
3
*
GUIDE, VALVE OS (OPTIONAL
GUIDE, EXHAUST VALVE OS (OPTIONAL) ......... 1............ INCLUDES ITEM W/
CLIP, VALVE GUIDE
GASKET, CYLINDER HEAD
COVER, HEAD
GASKET, CYLINDER HEAD COVER
TUBE, BREATHER
BOLT, FLANGE 6 X13
BOLT, STUD 6 X109
1
%
4
%
1
1
1
1
1
4
2
2
2
4
1
5
6
7
8
9
10
11
12
14
15
BOLT, STUD 8 X 32
PIN A, DOWEL 10 X16
BOLT, FLANGE 8 X60
SPARK PLUG BPR6ES (NGK)
957230806000
9807956846
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 69
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — FAN COVER ASSY.
FAN COVER ASSY.
PAGE 70 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — FAN COVER ASSY.
FAN COVER ASSY.
NO.
2
4
7
8
10
11
13
14
17
19
PART NO.
PART NAME
QTY.
REMARKS
19610ZE1000ZC
19611ZH8810
90601ZH7013
19630ZH8000
32197ZH8003
36100ZE1015
90013883000
90022888010
34150ZH7003
957010600800
COVER, FAN "NH1" (BLACK)
PLATE, SIDE (OIL ALERT)
CLIP, HARNESS
1
1
1
1
1
1
6
1
1
1
SHROUD
SUB- HARNESS
SWITCH ASSEMBLY, ENGINE STOP
BOLT, FLANGE 6 X12 (CT200)
BOLT, FLANGE 6 X20 (CT200)
ALERT UNIT, OIL
BOLT, FLANGE 6 X8
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 71
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — FLYWHEEL ASSY.
FLYWHEEL ASSY.
PAGE 72 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — FLYWHEEL ASSY.
FLYWHEEL ASSY.
NO.
1
2
4
5
5
8
PART NO.
PART NAME
KEY, SPECIAL WOODRUFF (25 X18)
FAN, COOLING
PULLEY, STARTER
FLYWHEEL
FLYWHEEL, LAMP
NUT, SPECIAL 14MM
QTY.
REMARKS
13331357000
19511ZE1000
28451ZH8003
31100ZE1010
31100ZE1810
90201878003
1
1
1
1
1
1
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 73
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — FUELTANK ASSY.
FUEL TANK ASSY.
PAGE 74 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — FUELTANK ASSY.
FUEL TANK ASSY.
NO.
1
2
3
3
PART NO.
PART NAME
RUBBER, SUPPORTER 107MM
JOINT, FUEL TANK
TANK, FUEL *R8* (BRIGHT RED)
TANK, FUEL *NH1* (BLACK)
CAP, FUEL FILLER ............................................... 1 ........... INCLUDES ITEM W/
GASKET, FUEL FILLER CAP
O- RING 13.5 X1.5 (ARAI)
NUT, FLANGE 6MM
BULK HOSE, FUEL 4.5 X 3000 (4.5 X 140)
CLIP, TUBE B8
QTY.
REMARKS
16854ZH8000
16955ZE1000
17510ZE1020ZB
17510ZE1020ZF
17620ZH7023
17631ZH7003
91353671003
9405006000
1
1
1
1
5
6
*
1
1
2
1
2
1
*
11
12
13
14
15
950014500360M
9500202080
957010602500
BOLT, FLANGE 6 X 25
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 75
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — IGNITION COIL ASSY.
IGNITION COIL ASSY.
PAGE 76 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — IGNITION COIL ASSY.
IGNITION COIL ASSY.
NO.
1
2
7
11
PART NO.
PART NAME
QTY.
REMARKS
30500ZE1033
30700ZE1013
36101ZE1010
90121952000
COIL ASSEMBLY, IGNITION
CAP ASSEMBLY, NOISE SUPPRESSOR
WIRE, STOP SWITCH 370MM
BOLT, FLANGE 6 X25
1
1
1
2
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 77
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — MUFFLER ASSY.
MUFFLER ASSY.
PAGE 78 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
1
3
7
PART NO.
PART NAME
QTY.
REMARKS
18310ZF1000
18310ZH8810
18320ZF1H01
18355ZE1000
18381ZH8800
90050ZE1000
90055ZE1000
94001080000S
MUFFLER
1
1
1
1
1
4
1
2
MUFFLER (OPTIONAL)
PROTECTOR, MUFFLER
ARRESTER, SPARK (OPTIONAL)
GASKET, MUFFLER
SCREW, TAPPING 5 X 8 (OPTIONAL
SCREW, TAPPING 4 X 6 (OPTIONAL)
NUT, HEX. 8MM
8
11
12
15
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 79
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — PISTON ASSY.
PISTON ASSY.
PAGE 80 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — PISTON ASSY.
PISTON ASSY.
NO.
1
1
1
1
1
1
1
1
2
2
2
2
3
4
4
5
PART NO.
PART NAME
QTY.
REMARKS
13010ZF1023
13010ZH8941
13011ZF1023
13011ZH8941
13012ZF1023
13012ZH8941
13013ZF1023
13013ZH8941
13101ZH8000
13102ZH8000
13103ZH8000
13104ZH8000
13111ZE1000
132AOZE1000
13200ZE1010
90001ZE1000
90551ZE1000
RING SET, PISTON (STANDARD) ............................ 1 ........ USE UP TO ENG S/N 5495899
RING SET, PISTON (STANDARD) ............................ 1 ........ USE FROM ENG S/N 5495900
RING SET, PISTON (OS 0.25) ................................. 1 ........ USE UP TO ENG S/N 5495899
RING SET, PISTON (OS 0.25), OPTIONAL ............. 1 ........ USE FROM ENG S/N 5495900
RING SET, PISTON (OS 0.50), OPTIONAL ............. 1 ........ USE UP TO ENG S/N 5495899
RING SET, PISTON (OS 0.50), OPTIONAL ............. 1 ........ USE FROM ENG S/N 5495900
RING SET, PISTON (0.75), OPTIONAL ................... 1 ........ USE UP TO ENG S/N 5495899
RING SET, PISTON (0.75), OPTIONAL ................... 1 ........ USE FROM ENG S/N 5495900
PISTON (STANDARD)
1
1
1
1
1
1
1
2
2
PISTON (OS 0.25), OPTIONAL
PISTON (OS 0.50), OPTIONAL
PISTON (0.75), OPTIONAL
PIN, PISTON
ROD ASSY., CONNECTING (US 0.25), OPT.
ROD ASSEMBLY, CONNECTING
BOLT, CONNECTING ROD
CLIP, PISTON PIN 18MM
6
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 81
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
PAGE 82 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
28400ZH8013ZB
28410ZH8003ZB
28420ZH8013
28422ZH8013
28433ZH8003
28441ZH8003
28442ZH8003
28443ZH8003
28461ZH8003
28462ZH8003
90003ZH8003
90008ZE2003
STARTER ASSY., RECOIL "NH1" BLACK ...................1 ............INCLUDES ITEM W/
*
2
CASE, RECOIL STARTER "NH1" BLACK
REEL, RECOIL STARTER
RATCHET, STARTER
GUIDE, RATCHET
SPRING, FRICTION
SPRING, RECOIL STARTER
SPRING, RETURN
KNOB, RECOIL STARTER
ROPE, RECOIL STARTER
SCREW, SETTING
1
1
2
1
1
1
2
1
1
1
3
*
3
*
4
*
5
*
6
*
7
*
8
*
9
*
10
*
11
*
12
BOLT, FLANGE 6 X10
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 83
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
PAGE 84 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — GASKET KIT ASSY.
GASKET KIT ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
06111ZH8405
11381ZH8801
12251ZF1800
12391ZE1000
16212ZH8800
16221ZH8801
18381ZH8800
GASKET KIT ......................................................... 1............ INCLUDES ITEMS W/
*
1
*
2
*
3
*
4
*
5
*
6
*
GASKET CASE COVER (NON- ASBESTOS)
GASKET, CYLINDER HEAD
GASKET, CYLINDER HEAD COVER
GASKET, INSULATOR
GASKET, CARBURETOR
GASKET, MUFFLER
1
1
1
1
1
1
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 85
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — ENGINE LABELS ASSY.
ENGINE LABELS ASSY.
PAGE 86 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX160K1QX2 — ENGINE LABELS ASSY.
ENGINE LABELS ASSY.
NO.
1
PART NO.
87521ZH8020
PART NAME
QTY.
REMARKS
ENBLEM 5.5.......................................................... 1 ........... USE FROM ENGINE
SN 7438468
MARK, CAUTION (EXTERNAL) ............................ 1 ........... USE UP TO ENGINE
SN 3063877
2
87522ZE1810
3
6
7
8
87522ZH9000
87528ZE1810
87530ZH8810
87532ZH8810
887586ZH7W00
LABEL, CAUTION
1
1
1
1
1
MARK, CHOKE
LABEL, SPECIFICATION (EXTERNAL)
MARK, OIL ALERT (E)
LABEL, FUEL CAUTION
15
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 87
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
PAGE 88 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
1
2
3
*
5
6
PART NO.
PART NAME
QTY.
REMARKS
16271ZE2000
17210ZE2822
17218ZE2505
17231ZH9820
17232891000
17238ZE2310
17239ZE1000
17410ZE2020
90325044000
90009ZE2003
9405006000
GASKET, ELBOW
1
ELEMENT, AIR CLEANER, DUAL ............. 1 ............. INCLUDES ITEMS W/
FILTER, OUTER
COVER, AIR CLEANER
GROMMET, AIR CLEANER
COLLAR, AIR CLEANER
COLLAR B, AIR CLEANER
*
1
1
1
2
1
8
%
9
%
10
13
14
15
ELBOW COMP., AIR CLEANER ............... 1 ............. INCLUDES ITEMS W/
%
WINGNUT, TOOL BOX SETTING
BOLT- WASHER 6 X 22
NUT, FLANGE 6MM
2
1
2
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 89
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
PAGE 90 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
2
3
4
PART NO.
PART NAME
QTY.
REMARKS
14100ZE2W01
14410ZE2013
14431ZE2010
14441ZE2000
14451ZE1013
14568ZE1000
14711ZE2000
14721ZE2000
14751ZE2003
14771ZE2000
14773ZE2000
14781ZE2000
14791ZE2010
90012ZE0010
90206ZE1000
CAMSHAFT ASSY. ................................... 1 ............. INCLUDES ITEMS W/
*
ROD PUSH
ARM VALVE ROCKER
LIFTER VALVE
PIVOT ROCKER ARM
SPRING, WEIGHT RETURN
VALVE, IN.
2
2
2
2
1
1
1
2
1
1
1
1
2
2
5
6
*
7
8
VALVE, EX.
SPRING, VALVE
9
10
11
12
13
14
15
RETAINER, IN. VALVE SPRING
RETAINER, EX. VALVE SPRING
ROTATOR, VALVE
PLATE, PUSH ROD GUIDE
BOLT, PIVOT 8MM
NUT, PIVOT ADJ.
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 91
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CARBURETOR ASSY.
CARBURETOR ASSY.
PAGE 92 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CARBURETOR ASSY.
CARBURETOR ASSY.
NO.
PART NO.
+ 16010ZE2812
16011ZA0931
16013ZA0931
16016ZHW01
16024ZE1811
16028ZE0005
16028ZE2005
16100ZE2W71
16124ZE0005
16166ZE2W70
16172ZE3W10
16173001004
16211ZE2000
16220ZA0702
16221ZA0800
16223ZA0800
16610ZE1000
16953ZE1812
16954ZE1811
16956ZE1811
16957ZE1812
16967ZE0811
93500030060H
9430520122
PART NAME
QTY.
REMARKS
1
2
3
%
GASKET SET
VALVE SET, FLOAT
FLOAT SET
1
1
1
1
1
1
1
*
*
*
5
SCREW SET
*
6 +
*
SCREW SET, DRAIN
SCREW SET B
CHOKE SET
CARBURETOR ASSY................................ 1 ............. INCLUDES ITEMS W/
SCREW, THROTTLE STOP
NOZZLE, MAIN
COLLAR, SET
O-RING
INSULATOR, CARBURETOR
SPACER COMP., CARBURETOR
GASKET, CARBURETOR
GASKET, INSULATOR
LEVER COMP., CHOKE, STD. ................. 1 ............. INCLUDES ITEMS W/
LEVER, VALVE
PLATE, LEVER SETTING
SPRING, VALVE LEVER
GASKET, VALVE
CUP, FUEL STRAINER
SCREW, PAN 3 X 6
PIN, SPRING 2 X 12
JET, MAIN #82, OPTIONAL
JET, MAIN #85, OPTIONAL
JET, MAIN #88
JET SET, PILOT #40 ................................. 1 ............. INCLUDES ITEMS W/
CHAMBER SET, FLOAT ............................ 1 ............. INCLUDES ITEMS W/+
7
*
8
9
*
*
10
1
1
1
1
1
1
1
1
*
11
*
12
*
13
*
14
15
16
17
18
■
19
1
1
1
1
1
2
1
1
1
1
*
20
*
21
*
22
*
23
24
25
26
26
*
■
99101ZH80820
99101ZH80850
99101ZH80880
99204ZE20400
16015ZE8005
26
*
27
*
%
28
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 93
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CONTROL ASSY.
CONTROL ASSY.
PAGE 94 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO.
1
2
3
4
5
8
PART NO.
PART NAME
QTY.
REMARKS
16550ZE2700
16551ZE2000
16555ZE2000
16561ZE2000
16562ZE2000
16570ZE2W20
16571ZE2W00
16574ZE1000
16575ZE2W00
16576891000
16578ZE1000
16581ZE2W00
16584883300
16592883310
90013883000
90015ZE5010
90114SA0000
93500050280A
93500050160A
9405006000
ARM, GOVERNOR
ARM, GOVERNOR
ROD, GOVERNOR
1
1
1
1
1
SPRING, GOVERNOR
SPRING,THROTTLE RETURN
CONTROL ASSY., REMOTE ...................... 1............. INCLUDES ITEMS W/
LEVER, CONTROL
SPRING, LEVER
WASHER, CONTROL LEVER
HOLDER, CABLE
SPACER, CONTROL LEVER
BASE COMP., CONTROL
SPRING, CONTROL ADJUSTING
SPRING, CABLE RETURN
BOLT, FLANGE 6 X 12 CT200
BOLT, GOVERNOR ARM
NUT, SELF-LOCK 6MM
SCREW, PAN 5 X 28
*
10
1
1
1
1
1
1
1
1
2
1
1
1
1
1
*
11
*
12
*
13
*
14
*
15
*
16
*
17
19
*
20
21
24
*
26
*
SCREW, PAN 5 X 16
NUT, FLANGE 6MM
27
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 95
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
PAGE 96 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
2
3
4
5
PART NO.
PART NAME
QTY.
REMARKS
11400ZE2601
11381ZE2801
15600ZG4003
15600735003
15625ZE1000
15625ZE1003
16510ZE2811
COVER ASSY., CRANKCASE .................. 1 ............. INCLUDES ITEMS W/
*
%
GASKET, CASE COVER
CAP ASSY., OIL FILLER .......................... 1 ............. INCLUDES ITEMS W/
CAP ASSY., OIL FILLER .......................... 1 ............. INCLUDES ITEMS W/+
GASKET, OIL FILLER CAP
GASKET, OIL FILLER CAP
GOVERNOR ASSY., BALANCER ............. 1 ............. INCLUDES ITEMS W/$
WEIGHT, GOVERNOR
HOLDER, GOVERNOR WEIGHT
PIN, GOVERNOR WEIGHT
SLIDER, GOVERNOR
WASHER 6 X 16
CLIP, GOVERNOR HOLDER
PIN, DOWEL 8 X 12
OIL SEAL 30 X 46 X 8
WASHER, PLAIN 6MM
BOLT, FLANGE 8 X 35
BEARING, RADIAL BALL 6202
BEARING, RADIAL BALL 6206
1
8+
1
1
9
%
10
*
11 $ 16511ZE2000
2
1
2
1
1
1
2
1
1
7
1
*
12 $ 16512ZE2811
*
13 $ 16513ZE2000
*
14
15
16
17
18
19
20
21
22
16531ZE2000
90473147000
90602ZE1000
90701HC4000
91201890003
9410106800
957010803500
961006202000
961006206000
*
*
*
*
*
*
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 97
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
PAGE 98 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
2
8
PART NO.
PART NAME
QTY.
REMARKS
13320ZE2601
13351ZE2010
90745ZE2600
961006206000
CRANKSHAFT COMP., Q- TYPE.............. 1 ............. INCLUDES ITEMS W/
*
WEIGHT, BALANCER
KEY 6.3 X 6.3 X 43
BEARING, RADIAL BALL 6206
1
1
1
10
12
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 99
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
PAGE 100 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
1
3
6
7
PART NO.
PART NAME
QTY.
REMARKS
12000ZE2834
16541ZE2010
90131896650
90446KE1000
91201890003
9410912000
9425110000
961006202000
90013883000
34150ZH7003
CYLINDER ASSY., BALANCER + OIL ALERT ...... 1 .......... INCLUDES ITEMS W/
*
SHAFT, GOVERNOR ARM
BOLT, DRAIN PLUG
WASHER 8.2 X17X0.8
OIL SEAL 30X46X8
WASHER, DRAIN PLUG 12MM
PIN, LOCK 10MM
BEARING, RADIAL BALL 6202
BOLT, FLANGE 6X12 CT200
ALERT UNIT, OIL
1
2
1
1
2
1
1
1
1
8
*
11
12
14
15
16
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 101
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
PAGE 102 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
12200ZH9000
12204ZE2306
12205ZE2305
12216ZE2300
12251ZE2800
12310ZE2020
12391ZE2020
14775ZE2010
90014ZE2000
90042ZE2000
92900080320E
90441ZE2010
9430112200
CYLINDER HEAD COMP. ....................................... 1 .......... INCLUDES ITEMS W/
*
2
*
3
*
4
*
5
6
7
GUIDE, VALVE, OS, OPTIONAL
GUIDE, EX. VALVE, OS, OPTIONAL
CLIP, VALVE GUIDE
GASKET, CYLINDER HEAD
COVER COMP., HEAD
GASKET, CYLINDER HEAD COVER
SEAT, VALVE SPRING
BOLT, HEAD COVER
BOLT, STUD 8X123
BOLT 2, STUD 8X32
WASHER COMP., HEAD COVER
PIN A, DOWEL 12X20
BULK HOSE, VACUUM 11X1000, 11X100
BOLT, FLANGE 10X80
1
1
1
1
1
1
1
1
2
2
1
2
1
4
1
1
1
1
8
10
11
12
13
14
15
16
17
17
17
17
950051100130M
957011008000
9807955846
9807955855
9807956846
SPARK PLUG, BPR5ES, NGK
SPARK PLUG, W16EPR-U, DENSO, OPTIONAL
SPARK PLUG, BPR6ES, NGK
SPARK PLUG, W20EPR-U, DENSO
9807956855
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 103
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
PAGE 104 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
NO.
1
2
3
4
5
7
9
PART NO.
PART NAME
QTY.
REMARKS
16731ZE2003
19610ZE2010ZC
19631ZE2D00
32197ZH8003
36100ZH7003
90013883000
90684ZA0601
CLIP, TUBE
1
1
1
1
1
6
1
COVER COMP., FAN *NH1* BLACK
SHROUD
SUB-HARNESS
SWITCH ASSY., ENGINE STOP
BOLT, FLANGE 6X12, CT200
CLIP, WIRE HARNESS
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 105
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — FLYWHEEL ASSY.
FLYWHEEL ASSY.
PAGE 106 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — FLYWHEEL ASSY.
FLYWHEEL ASSY.
NO.
1
2
4
7
PART NO.
PART NAME
QTY.
REMARKS
19511ZE2000
28450ZE2W11
31100ZE2010
90201ZE3V00
90741ZE2000
FAN, COOLING
1
1
1
1
1
PULLEY COMP., STARTER, SCREEN GRID
FLYWHEEL COMP.
NUT, SPECIAL 16MM
8
KEY, SPECIAL WOODRUFF 25X18
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 107
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2ENGINE — FUELTANK ASSY.
FUEL TANK ASSY.
PAGE 108 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2ENGINE — FUELTANK ASSY.
FUEL TANK ASSY.
NO.
1
2
3
5
6
*
8
11
12
13
14
15
PART NO.
PART NAME
RUBBER SUPPORTER 107MM
JOINT, FUEL TANK
TANK COMP., FUEL *NH1*, BLACK
CAP COMP., FUEL FILLER .................................... 1 .......... INCLUDES ITEMS W/
GASKET, FUEL FILLER CAP
FILTER, FUEL
O-RING 14MM, ARAI
NUT, FLANGE 8MM
BULK HOSE, FUEL 4.5X3000, 4.5X222
CLIP, TUBE, B8
BOLT, FLANGE 8X25
QTY.
REMARKS
16854ZH8000
16955ZE1000
17510ZE2020ZD
17620ZH7023
17631ZH7003
17672ZE2W01
91353671003
9405008000
1
1
1
*
1
1
1
2
1
2
2
950014500360M
9500202080
957010802500
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 109
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — IGNITION COIL ASSY.
IGNITION COIL ASSY.
PAGE 110 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — IGNITION COIL ASSY.
IGNITION COIL ASSY.
NO.
1
2
6
8
PART NO.
PART NAME
QTY.
REMARKS
30500ZE2023
30700ZE1013
31512ZE2000
36101ZE1010
90015883000
COIL ASSY., IGNITION
CAP ASSY., NOISE SUPPRESSOR
GROMMET, WIRE
1
1
1
1
2
WIRE, STOP SWITCH 370MM
BOLT, FLANGE 6X28
11
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 111
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
PAGE 112 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
2
3
4
5
6
7
8
10
11
12
13
14
PART NO.
PART NAME
QTY.
REMARKS
18310ZE2W00
18320ZE2W01
18323ZE2W00
18330ZE2W00
18331ZE2810
18333ZE3800
18355ZE2010
18381ZE2W10
90013883000
90050ZE1000
90055ZE1000
90050ZE1000
9405008000
MUFFLER COMP.
1
1
1
1
1
1
1
1
1
6
3
1
5
PROTECTOR COMP., MUFFLER
PROTECTOR, EX. PIPE
PIPE, EX.
CAP, MUFFLER
GASKET, EX. PIPE
ARRESTER, SPARK
GASKET, MUFFLER, ARRESTER
BOLT, FLANGE 6X12 CT200
SCREW, TAPPING 5X8
SCREW, TAPPING 4X6
SCREW, TAPPING 5X8
NUT, FLANGE 8MM
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 113
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — PISTON ASSY.
PISTON ASSY.
PAGE 114 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — PISTON ASSY.
PISTON ASSY.
NO.
1
1
1
1
2
2
2
2
3
4
4
5
*
6
PART NO.
PART NAME
QTY.
REMARKS
13010ZE2013
13011ZE2013
13012ZE2013
13013ZE2013
13101ZE2W00
13102ZE2W00
13103ZE2W00
13104ZE2W00
13111ZE2000
13200ZE2000
13200ZE2305
90001ZE8000
90551ZE1000
RING SET, PISTON, STD.
RING SET, PISTON, OS 0.25, OPTIONAL
RING SET, PISTON, OS 0.50, OPTIONAL
RING SET, PISTON, 0.75, OPTIONAL
PISTON, STANDARD
1
1
1
1
1
1
1
1
1
PISTON, OS 0.25, OPTIONAL
PISTON, OS 0.50, OPTIONAL
PISTON, 0.75, OPTIONAL
PIN, PISTON
ROD ASSY., CONNECTING STANDARD ................ 1 ..........INCLUDES ITEMS W/
ROD ASSY., CONNECTING, US 0.25, OPT. .......... 1 ..........INCLUDES ITEMS W/
*
*
BOLT, CONNECTING ROD
CLIP, PISTON PIN 18MM
2
2
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 115
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
PAGE 116 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
28400ZE2W01ZB
28410ZE2W01ZB
28421ZE2W01
28422ZE2W01
28441ZE2W01
28442ZE2W01
28443ZE2W01
28444ZE2W01
28461ZE2W02
28462ZE2W11
90004ZE2W01
90008ZE2003
STARTER ASSY., RECOIL *NH1*, BLACK ................... 1 ....... INCLUDES ITEMS W/
*
2
3
CASE COMP., RECOIL STARTER *NH1*, BLACK
PULLEY, RECOIL STARTER
RATCHET, STARTER
SPRING, FRICTION
SPRING, STARTER RETURN
SPRING RATCHET
RETAINER, SPRING
GRIP, STARTER
ROPE, RECOIL STARTER
SCREW, CENTER
BOLT, FLANGE 6X10
1
1
2
1
1
2
1
1
1
1
3
*
*
4
5
*
*
6
7
*
*
8
*
10
*
11
*
13
*
14
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 117
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — ENGINE LABELS
ENGINE LABELS
PAGE 118 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX240K1QA2 ENGINE — ENGINE LABELS
ENGINE LABELS
NO.
1
3
5
16
PART NO.
PART NAME
EMBLEM, INTERNAL
LABEL, CAUTION
MARK, CHOKE, EXTERNAL
MARK, OIL ALERT, E
QTY.
REMARKS
87521ZE2W01
87522ZH9000
87528ZE2810
87532ZH8810
1
1
1
1
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 119
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
PAGE 120 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — AIR CLEANER ASSY.
AIR CLEANER ASSY.
NO.
1
2
3
*
4
5
*
6
PART NO.
PART NAME
QTY.
REMARKS
16271ZE2000
17210ZE3505
17218ZE3505
17231ZE3W00
17232891000
17235ZH9N00
17238ZE2310
17239ZE1000
17410ZH9N00
90203ZA0800
90325044000
934040602008
9405006000
GASKET, ELBOW
1
ELEMENT, AIR CLEANER............................... 1 ................ INCLUDES ITEMS W/
FILTER, OUTER
COVER, AIR CLEANER
GROMMET, AIR CLEANER
NOSE, MUFFLER
COLLAR, AIR CLEANER
COLLAR B, AIR CLEANER
ELBOW, AIR CLEANER .................................. 1 ................ INCLUDES ITEMS W/
WINGNUT 6MM
WINGNUT, TOOL BOX SETTING
BOLT- WASHER 6 X 20
NUT, FLANGE 6MM
*
1
1
1
1
2
1
7
8
9
#
#
#
11
12
13
14
1
1
1
2
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 121
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
PAGE 122 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CAMSHAFT ASSY.
CAMSHAFT ASSY.
NO.
1
2
3
4
PART NO.
PART NAME
QTY.
REMARKS
14100ZE3020
14410ZE3013
14431ZE2010
14441ZE2000
14451ZE1013
14568ZE1000
14711ZE3000
14721ZE3000
14751ZE2003
14771ZE2000
14773ZE2000
14775ZE2010
14781ZE2000
14791ZE2010
90012ZE0010
90206ZE1000
12209ZE8003
CAMSHAFT ASSEMBLY ................................. 1 ................ INCLUDES ITEM W/
*
ROD, PUSH
ARM, VALVE ROCKER
LIFTER, VALVE
PIVOT, ROCKER ARM
SPRING, WEIGHT RETURN
VALVE, INTAKE
2
2
2
2
1
1
1
2
1
1
1
1
1
2
2
1
5
6
*
7
8
VALVE, EXHAUST
SPRING, VALVE
9
10
11
12
13
14
15
16
17
RETAINER, INTAKE VALVE SPRING
RETAINER, EXHAUST VALVE SPRING
SEAT, VALVE SPRING
ROTATOR, VALVE
PLATE, PUSH ROD GUIDE
BOLT, PIVOT 8MM
NUT, PIVOT ADJ.
SEAL, VALVE STEM
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 123
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CARBURETOR ASSY.
CARBURETOR ASSY.
PAGE 124 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CARBURETOR ASSY.
CARBURETOR ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
16010ZE2812
16011ZA0931
16013ZA0931
16015ZE8005
16016ZH7W01
16024ZE1811
16028ZE0005
16044ZE3811
16100ZE3V01
16124ZE0005
16166ZE3W50
16172ZE3W10
16173001004
16211ZE3000
16220ZA0702
16221ZE3800
16223ZE3800
16610ZE1000
16953ZE1812
16954ZE1812
16956ZE1811
16957ZE1812
16967ZE0811
93500030060H
9430520122
GASKET SET
1
1
1
1
1
1
1
1
*
2
3
VALVE SET, FLOAT
FLOAT SET
CHAMBER SET, FLOAT
SCREW SET
SCREW SET, DRAIN
SCREW SET B
CHOKE SET
CARBURETOR ASSEMBLY (BE80B B) .......... 1 ................ INCLUDES ITEMS W/
SCREW, THROTTLE STOP
NOZZLE, MAIN
*
*
4
5
*
*
6
7
*
*
8
9
*
*
*
10
1
1
1
1
1
1
1
1
*
11
*
12
*
COLLAR, SET
13
*
GASKET, FUEL STRAINER CUP
INSULATOR, CARBURETOR
SPACER, CARBURETOR
GASKET, CARBURETOR
GASKET, INSULATOR
LEVER, CHOKE (STANDARD)......................... 1 ................ INCLUDES ITEM W/
LEVER, VALVE
PLATE, LEVER SETTING
SPRING, VALVE LEVER
GASKET, VALVE
CUP, FUEL STRAINER
SCREW, PAN 3 X 6
PIN, SPRING 2 X12
JET, MAIN #88 (OPTIONAL)
JET, MAIN #90 (OPTIONAL)
JET, MAIN #92
14
15
16
17
18
#
19
1
1
1
1
1
2
1
1
1
1
1
*
20
*
21
*
22
*
23
*
24
*
25
26
26
26
27
#
99101ZH70880
99101ZH80800
99101ZH80920
99204ZE00350
*
*
*
*
JET SET, PILOT #35
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 125
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
PAGE 126 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CRANKCASE COVER ASSY.
CRANKCASE COVER ASSY.
NO.
1
2
3
4
PART NO.
PART NAME
GOVERNOR KIT (OPTIONAL)......................... 1 ................ INCLUDES ITEMS W/
COVER ASSY., CRANKCASE (Q TYPE) ........ 1 ................ INCLUDES ITEMS W/$
GASKET, CASE COVER
QTY.
REMARKS
06165ZE3000
11300ZE3602
11381ZE3801
15600ZG4003
15600735003
15625ZE1003
15625ZE1003
16510ZE3000
16511ZE8000
16512ZE3000
16513ZE2000
16531ZE2000
90602ZE1000
90701HC4000
91201ZE3004
9410106800
♣
1
CAP ASSEMBLY, OIL FILLER ......................... 1 ................ INCLUDES ITEMS W/
CAP ASSEMBLY, OIL FILLER ......................... 1 ................ INCLUDES ITEMS W/
*
5
7
%
GASKET, OIL FILLER CAP
GASKET, OIL FILLER CAP
1
1
*
8
%
9$
10
11
12
13
15
16
GOVERNOR ASSEMBLY ................................ 1 ................ INCLUDES ITEMS W/
#
#
#
#
♣
♣
♣
♣
♣
$
$
$
$
$
WEIGHT, GOVERNOR
3
1
3
1
1
2
1
1
7
1
1
HOLDER, GOVERNORWEIGHT
PIN, GOVERNOR WEIGHT
SLIDER, GOVERNOR
CLIP, GOVERNOR HOLDER
PIN, DOWEL 8X12
OIL SEAL 35X52X8
WASHER, PLAIN 6MM
BOLT, FLANGE 8X40
17$
18
19
♣
$
957010804000
961006202000
961006207000
20$
21$
BEARING, RADIAL BALL 6202
BEARING, RADIAL BALL 6207
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 127
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO ART WORK
AVAILABLE
PAGE 128 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CONTROL ASSY.
CONTROL ASSY.
NO.
2
3
4
5
6
8
9
10
11
12
14
15
16
17
18
19
20
21
22
23
24
PART NO.
PART NAME
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
REMARKS
16551ZE3000
16555ZE3000
16561ZE3000
16562ZE3000
16570ZE3W10
16571ZE3W00
16574ZE1000
16575ZE2W00
16576891000
16578ZE1000
16584883300
16592883310
16594883010
90013883000
90015ZE5010
90114SA0000
90605230000
93500040060H
93500050320A
93500050160A
9405006000
ARM, GOVERNOR
ROD, GOVERNOR
SPRING, GOVRNOR
SPRING, THROTTLE RETURN
CONTROL ASSEMBLY (REMOTE)
LEVER, CONTROL
SPRING, LEVER
WASHER CONTROL LEVER
HOLDER, CABLE
SPACER, CONTROL LEVER
SPRING, CONTROL ADJUSTING
SPRING, CABLE RETURN
HOLDER, WIRE
BOLT, FLANGE 6X12
BOLT, GOVERNOR ARM
NUT, SELF- LOCK 6MM
CIRCLIP 5MM
1
1
1
1
SCREW, PAN 4X6
SCREW, PAN 5X32
SCREW, PAN 5X16
NUT, FLANGE 6MM
1
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 129
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
PAGE 130 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CYLINDER BARREL ASSY.
CYLINDER BARREL ASSY.
NO.
1
2
3
6
PART NO.
PART NAME
QTY.
REMARKS
12000ZE3816
15510ZE2043
16541ZE3010
90131896650
90446KE1000
91201ZE3004
91201ZE9003
91353671003
9405010000
9410912000
9425110000
957010601200
961006202000
90013883000
34150ZH7003
CYLINDER ASSEMBLY ................................... 1 ................ INCLUDES ITEMS W/
*
SWITCH ASSEMBLY OIL LEVEL
SHAFT, GOVERNOR ARM
BOLT, DRAIN PLUG
WASHER 8.2X17X0.8
OIL SEAL 35X52X8
OIL SEAL 8X14X5
O- RING 13.5X1.5 (ARAI)
NUT, FLANGE 10MM
WASHER, DRAIN PLUG 12MM
PIN, LOCK 10MM
BOLT, FLANGE 6X12
BEARING, RADIAL BALL 6202
BOLT, FLANGE 6X12 (CT200)
ALERT UNIT, OIL
1
1
2
1
1
1
1
1
2
1
2
1
1
1
7
9
*
10
11
*
12
13
14
15
16
17
18
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 131
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
PAGE 132 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CYLINDER HEAD ASSY.
CYLINDER HEAD ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
12200ZF6W00
12204ZE2306
12205ZE2305
12216ZE2300
12251ZE3W00
12310ZE3791
12315ZE3840
12391ZE2020
90014ZE2000
90042ZE8000
92900080320E
90441ZE2010
9430112200
CYLINDER HEAD ............................................ 1 ................ INCLUDES ITEMS W/
*
2
*
3
*
4
*
5
6
7
GUIDE, VALVE OS (OPTIONAL)
GUIDE, EX. VALVE OS (OPTIONAL)
CLIP, VALVE GUIDE
GASKET, CYLINDER HEAD
COVER, HEAD
TUBE, BREATHER
GASKET, CYLINDER HEAD COVER
BOLT, HEAD COVER
BOLT, STUD 8X131.5
BOLT 2, STUD 8X32
WASHER, HEAD COVER
PIN A, DOWEL 12X20
BOLT, FLANGE 10X80
1
1
1
1
1
1
1
1
2
2
1
2
4
1
8
10
11
12
13
14
15
16
957011008000
9807956846
SPARK PLUG BPR6ES (NGK)
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 133
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
PAGE 134 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — CRANKSHAFT ASSY.
CRANKSHAFT ASSY.
NO.
1
5
PART NO.
PART NAME
QTY.
REMARKS
13310ZE3601
13351ZE3010
90745ZE2600
961006207000
CRANKSHAFT, Q- TYPE ................................. 1 ................ INCLUDES ITEM W/
*
WEIGHT, BALANCER
KEY 6.3X6.3X43
BEARING, RADIAL BALL 6207
1
1
1
6
7
*
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 135
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
PAGE 136 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — FAN COVER ASSY.
FAN COVER ASSY.
NO.
1
2
3
5
7
8
PART NO.
PART NAME
QTY.
REMARKS
16731ZE2003
19610ZE3010ZB
19631ZE3W00
36100ZH7003
90013883000
90684ZA0601
CLIP, TUBE
1
1
1
1
6
1
COVER, FAN *NH1* (BLACK)
SHROUD
SWITCH ASSEMBLY, ENGINE STOP
BOLT, FLANGE 6X12 (CT200)
CLIP, WIRE HARNESS
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 137
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — FLYWHEEL ASSY.
FLYWHEEL ASSY.
PAGE 138 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — FLYWHEEL ASSY.
FLYWHEEL ASSY.
NO.
1
2
4
6
PART NO.
PART NAME
QTY.
REMARKS
19511ZE3000
28450ZE3W11
31100ZE3701
90201ZE3V00
90741ZE2000
FAN, COOLING
1
1
1
1
1
PULLEY, STARTER (SCREEN GRID)
FLYWHEEL
NUT, SPECIAL 16MM
KEY, SPECIAL WOODRUFF 25X18
7
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 139
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — FUELTANK ASSY.
FUEL TANK ASSY.
PAGE 140 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — FUELTANK ASSY.
FUEL TANK ASSY.
NO.
1
2
3
5
6
*
7
10
11
12
13
14
PART NO.
PART NAME
RUBBER, SUPPORTER 107MM
JOINT FUEL TANK
TANK, FUEL "NH1" (BLACK)
CAP, FUEL FILLER .......................................... 1 ................ INCLUDES ITEM W/
GASKET, FUEL FILLER CAP
FILTER, FUEL
O- RING 13.5X1.5 (ARAI)
NUT, FLANGE 8MM
BULK HOSE, FUEL (4.5X3000) (4.5X235)
CLIP, TUBE B8
BOLT, FLANGE 8X25
QTY.
REMARKS
16854ZH8000
16955ZE1000
17510ZE3010ZB
17620ZH7023
17631ZH7993
17672ZE2W01
91353671003
9405008000
1
1
1
*
1
1
1
2
1
2
2
950014500360M
9500202080
957010802500
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 141
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — IGNITION COIL ASSY.
IGNITION COIL ASSY.
PAGE 142 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — IGNITION COIL ASSY.
IGNITION COIL ASSY.
NO.
1
2
4
7
PART NO.
PART NAME
QTY.
REMARKS
30500ZE2023
30700ZE1013
31512ZE2000
36101ZE2701
90015883000
COIL ASSEMBYL, IGNITION
CAP ASSEMBLY, NOISE SUPPRESSOR
GROMMET, WIRE
1
1
1
1
2
WIRE, STOP SWITCH 430MM
BOLT, FLANGE 6X28
10
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 143
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
PAGE 144 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — MUFFLER ASSY.
MUFFLER ASSY.
NO.
1
2
3
4
5
6
8
9
11
12
13
14
15
PART NO.
PART NAME
QTY.
REMARKS
18310ZE3W00
18320ZE3W01
18323ZE3W40
18330ZE2W00
18331ZE3810
18333ZF6W01
18355ZE3010
18381ZE2W10
90013883000
90050ZE1000
90055ZE1000
93500060060B
9405008000
MUFFLER
1
1
1
1
1
1
1
1
1
6
3
1
5
PROTECTOR, MUFFLER
PROTECTOR, EXHAUST PIPE
PIPE, EXHAUST
CAP, MUFFLER
GASKET, EXHAUST PIPE
ARRESTER, SPARK
GASKET, MUFFLER (ARRESTER)
BOLT, FLANGE 6X12 (CT200)
SCREW, TAPPING 5X8
SCREW, TAPPING 4X6
SCREW, PAN 6X6
NUT, FLANGE 8MM
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 145
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — PISTON ASSY.
PISTON ASSY.
PAGE 146 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — PISTON ASSY.
PISTON ASSY.
NO.
1
1
1
1
2
2
2
2
3
4
4
5
PART NO.
PART NAME
QTY.
REMARKS
13010ZE3003
13011ZE3003
13012ZE3003
13013ZE3003
13101ZE3W00
13102ZE3W00
13103ZE3W00
13104ZE3W00
13111ZF6000
13200ZE3010
13200ZE3315
90001ZE8000
90601ZE3000
RING SET, PISTON (STANDARD)
RING SET, PISTON (OS 0.25
RING SET, PISTON (OS 0.50)
RING SET, PISTON (0.75)
PISTON STANDARD
1
1
1
1
1
1
1
1
1
1
1
2
2
PISTON (OS 0.25)
PISTON (OS 0.50)
PISTON (0.75)
PIN, PISTON
ROD ASSEMBLY, CONNECTING (STD.)
ROD ASSEMBLY, CONNECTING (US 0.25)
BOLT, CONNECTING ROD
CLIP, PISTON PIN 20MM
6
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 147
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
PAGE 148 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
PART NAME
QTY.
REMARKS
28400ZE3W01ZB
28410ZE3W01ZB
28421ZE3W01
28422ZE2W01
28441ZE2W01
28442ZE2W01
28443ZE2W01
28444ZE2W01
28445ZE2W01
28461ZE2W02
28462ZE3W01
28469ZE2W01
90004ZE2W01
957010600800
STARTER ASSY., RECOIL "NH1" .................. 1 ................ BLACK
CASE, RECOIL STARTER "NH1" .................... 1 ................ BLACK
PULLEY, RECOIL STARTER
RATCHET, STARTER
SPRING, FRICTION
SPRING, STARTER RETURN
SPRING, RATCHET
RETAINER, SPRING
HOLDER, SPRING
1
2
1
1
2
1
1
1
1
1
1
3
9
10
11
12
13
14
GRIP, STARTER
ROPE, RECOIL STARTER
GRIP, REINFORCEMENT
SCREW, CENTER
BOLT, FLANGE 6X8
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 149
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — ENGINE LABELS ASSY.
ENGINE LABELS ASSY.
PAGE 150 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
HONDA GX-340K1QAP2 ENGINE — ENGINE LABELS ASSY.
ENGINE LABELS ASSY.
NO.
1
3
4
6
PART NO.
PART NAME
QTY.
REMARKS
87521ZE3W01
87522ZH9000
87528ZE2810
87532ZH8810
89218ZE1000
EMBLEM
1
1
1
1
1
LABEL, CAUTION
MARK, CHOKE (EXTERNAL)
MARK, OIL ALERT (E)
WRENCH, SPARK PLUG
9
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 151
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective: July 15, 2003
TERMS AND CONDITIONS OF SALE — PARTS
Terms and Conditions of Sale
STOW Construction Equipment
DROP SHIPMENTS
PAYMENT TERMS
Terms of payment for unit sales are 2% 15 days
net 30 days from date of invoice unless
otherwise specifically stated on our invoice. Parts
invoices have terms of net 10 days. Minimum
parts billing is $15.00 net.
Applicable discounts will be computed on
merchandise value only. Late charges will be
assessed at prevailing rates. Cash discounts
cannot be taken on current billings if any
previously billed amounts are past due.
STOW reserves the right to refuse Drop
Shipments outside the normal service area of
the purchasing dealer.
The sender will be notified of any material
received that does not meet the above provisions.
Such material will be held for 30 days from
notification pending instructions. If a reply is not
received within 30 days, the material will be
returned to the sender at his expense with no
credit issued.
FIELDWAREHOUSES
Field Warehouses are currently located in
California, Georgia, Idaho, Iowa, and New
Jersey
PRICING, REBATES AND
SPECIFICATIONS
Every effort will be made to provide adequate
notice of changes; however, prices and
equipment specifications are subject to change
without notice.
SPECIAL EXPEDITING SERVICE
The higher of a $35.00 surcharge or actual costs
will be added to the invoice for special handling,
including bus shipments, or in cases where
STOW personnel must personally deliver the
equipment or parts to the carrier.
FREIGHT POLICY
Freight policy is established to offer customers
every advantage possible. Due to bulk freight
ratings on some equipment and other shipping
considerations, freight policies differ by
equipment type. Actual back freight may be
charged for shipments originating from other
than specified FOB warehouses. See Freight
Policy for details.
All STOW domestic sales are FOB nearest
available designated MQ/STOW warehouse.
Export orders are ex-works factory located in
Carson, CA or Boise, ID.
Price changes are effective on a specific date
and all orders received on or after that date will
be billed at the revised price.
RETURNED GOODS POLICY
Return shipments may be accepted and credit
allowed, subject to the following provisions.
Rebates for price reductions and added charges
for price increases will not be made for stock in
dealer inventory at the time of a price change.
1. A Returned Material Authorization (RMA)
must be approved by STOW prior to
shipment. Approvals for returned goods must
be with just cause and are at the
sole discretion of STOW. A copy of the
Authorization must accompany the shipment
to the designated Warehouse.
STOW reserves the right to quote and sell direct
to Government agencies and to Original
Equipment Manufacturer accounts who use our
products as integral parts of their own products.
Additions to orders already shipped cannot be
accepted for freight minimums.
LIMITATION OF SELLER’S LIABILITY
2. Parts being returned must be listed as
currently supplied on the current parts list.
STOW shall not be liable hereunder for damages
in excess of the purchase price of the item with
respect to which damages are claimed and in
no event shall STOW be liable for loss of profit
or good will or for any other special, consequential
or incidental damages.
Should STOW elect to make partial shipments
of an order originally complying with the “freight
allowed” requirements, transportation charges
will be absorbed by STOW on any subsequent
shipment applying to that order.
3. Parts must be in new and resalable condition
in the original package, with part numbers
clearly marked.
4. Units and accessories must be current
models in the latest price list and in new and
resalable condition.
All other orders will be shipped collect or prepaid
with charges added to the invoice. STOW’s
responsibility ceases when a signed manifest
has been obtained from the carrier, and any
claim for shortage or damage must be settled
between the consignee and the carrier.
LIMITATION OF WARRANTIES
There are no warranties, express or implied,
made by STOW. hereunder on Products
manufactured or distributed by it except the
warranty against defects in material and
workmanship on new Products to the original
purchaser, as set forth in the STOW New Product
5. Special order items are not returnable for
credit.
6. Credit on returned parts and units will be
issued at actual dealer net price at time of
purchase less 15% restocking charge.
Parts: FOB Carson, California or Boise, Idaho.
See Freight Policy for details and
additional discounts.
7. All returned shipments are to be made to the Limited Warranty.
STOW designated receiving point, freight
prepaid at the sender’s expense.
STOW CONSTRUCTION EQUIPMENT
POST OFFICE BOX 6254
CARSON, CALIFORNIA 90749
310-661-4242 • 877-BUY-STOW
FAX:310-604-9237
E-MAIL: [email protected]
www.stowmfg.com
Atlanta • Boise • Newark • Quebec, Canada
Manchester, UK • Rio de Janeiro, BR • Puebla, MX
PAGE 152 — SCT SERIES WALK-BEHIND TROWEL— PARTS & OPERATION MANUAL — REV. #4 (04/02/07)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 153
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS AND OPERATION MANUAL
HERE'S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL NUMBER
ON-HANDWHEN CALLING
PARTS DEPARTMENT
800-427-1244 or 310-537-3700
FAX: 800-672-7877 or 310-637-3284
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE
800-478-1244 or 310-537-3700
FAX: 310- 537-4259
WARRANTY DEPARTMENT
888-661-4279, or 310-661-4279
FAX: 310- 537-1173
MAIN
800-421-1244 or 310-537-3700
FAX: 310-537-3927
SCT SERIESCONSTRUCTION EQUIPMENT
A DIVISION OF MULTIQUIP INC.
PARTS DEPARTMENT:
800-427-1244
POST OFFICE BOX 6254
FAX: 800-672-7877
SERVICE DEPARTMENT/TECHNICAL ASSISTANCE:
800-478-1244
CARSON, CA 90749
310-537-3700 • 888-252-SCT SERIES[888-252-7869]
FAX:310-537-1986 • FAX:800-556-1986
E-MAIL: [email protected] • WWW: stowmfg.com
FAX:310-631-5032
Download from Www.Somanuals.com. All Manuals Search And Download.
|