Speco Technologies Security Camera CVC5735DNV User Manual
INSTRUCTION  
MANUAL  
Intense-IR Camera  
CVC5735DNV / CVC5735DNVW  
CVC5835DNV / CVC5835DNVW  
CVC5935DNV / CVC5935DNVW  
Speco Technologies is constantly developing product improvements.  
We reserve the right to modify product design and specifications without notice and without incurring any obligation.  
Rev. 6/20/2012  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Do not install the camera in  
extreme temperature conditions.  
Do not install the camera under  
unstable lighting conditions.  
Do not touch the front lens of the  
camera.  
Only use the camera under conditions  
where temperatures are between  
-10°C and +50°C. Be especially careful to provide  
ventilation when operating under high  
temperatures.  
Severe lighting change or flicker can  
cause the camera to work improperly.  
This is one of the most important parts of the  
camera. Be careful not to leave  
fingerprints on the lens cover.  
Never keep the camera pointed  
directly at strong light.  
Do not drop the camera or subject  
it to physical shocks.  
Do not expose the camera to  
radioactivity.  
It can cause malfunctions to occur.  
Housing damage can compromise  
wheatherproof ratings.  
If exposed to radioactivity the CCD  
will fail.  
NOTE  
* If the camera is exposed to spotlight or object reflecting strong light,  
smear or blooming may occur.  
* please check that the power satisfies the normal specification before  
connecting the camera.  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK  
DO NOTREMOVE COVER(OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
ISO14001  
The lightning flash with an arrowhead symbol, within an equilateral  
triangle is intended to alert the user to the presence of uninsulated  
dangerous voltage within the product's enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert  
the user to the presence of important operating and maintenance  
(servicing) instructions in the literature accompanying the appliance.  
INFORMATION - This equipment has been tested and found to comply with  
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.  
These limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial environment.  
This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause  
harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at  
his own expense.  
WARNING - Changes or modifications not expressly approved by the  
manufacturer could void the user’s authority to operate the equipment.  
CAUTION : To prevent electric shock and risk of fire hazards:  
☞Do NOT use power sources other than those specified.  
This installation should be made by a qualified service person and  
should conform to all local codes.  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Instructions  
Precautions for use  
◑
◑
◑
◑
◑
◑
This camera should be installed by qualified personnel only  
There are no user serviceable parts inside  
Do not disassemble this camera other than to make initial adjustments  
Use a UL approved regulated 24 volt AC or 12 volt DC power supply  
Use appropriate low voltage power cable to prevent fire or electrical shock  
Please insure that your installation area can support the weight of the camera  
Please handle this camera carefully :  
◑
Do not use a strong or abrasive detergent when cleaning the camera  
◑
Do not install near cooling or heating device  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
Please make sure that the following items are included in the Package:  
1) CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW,  
CVC5935DNV, CVC5935DNVW  
• 1 Video Test Connector, Power Jack  
• 1 Wrench  
• Set Screw  
- 3 Tapping Screws 4x25  
- 1 Hexagon Socket Screw M5x8  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
jvuulj{Gwv~lyGjhislG  
XUG~oluG|zpunGXYG}vs{zGkjGOŠ–•š›ˆ•›G–“›ˆŽŒG\WWG”hPG  
w–žŒ™Gp•—œ›Gaylk  
jŒ•›Œ™GaGORP  
kjGXY}Gw–žŒ™Gzœ——“  
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}–“›Gh”—šP  
ylkORP  
hjGY[}  
ishjraOTP  
w–žŒ™Gzœ——“  
ZUGjvuulj{G}pklvGjhislG  
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
Compatibility  
1) CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW,  
CVC5935DNV, CVC5935DNVW  
INTWM  
INTPM  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA INSTALLATION  
1.  
CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW,  
CVC5935DNV, CVC5935DNVW  
DOME BASE ASSEMBLY  
TAPPING SCREW 4X25, 3EA  
DOME COVER ASSEMBLY  
HEXAGON SOCKET SCREW M5x8, 1EA  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intense - IR Vandal Dome Camera  
DC Auto Iris Varifocal Lens(4mm-9mm) / IR LED Built-in 33 pcs  
CVC5735DNV  
■
■
CVC5735DNVW  
600TV Lines  
DC Auto Iris Varifocal Lens  
(4mm-9mm)  
True Day/Night Capability  
ICR-IR Cut Filter Removable  
850nm IR LEDs x 33pcs  
SPECIFICATIONS  
MODEL  
CVC5735DNV / CVC5735DNVW  
1/3" SONY Super HAD ll CCD  
Sensor  
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
2:1 Interlace  
Internal / Line Lock(Option)  
Available  
Total Pixels  
Effective Pixels  
Scanning System  
Synchronization  
O.S.D  
OFF / HSBLC / BLC Selectable  
600TV Lines  
Backlight  
Resolution  
52dB (AGC Off, Weight On)  
0.000006 Lux(IR LED ON)  
ATW / AWB / Manual / AWC →SET  
1/50sec, 1/60sec ~ 1/100,000sec  
Off / Auto(Selectable limit *2 ~ *256)  
High, Middle, Low, Off Selectable  
Off/On (1~50 Level Adjustable)  
Indoor / Outdoor / Off  
On/Off (4 Zone)  
On/Off (8 Zone)  
Off / Mirror / V-Rev / Rotate  
On/Off  
0~31’(Level Adjustable)  
Color /BW/ Auto/ EXT  
S/N (Y signal)  
Min. Illumination  
White Balance  
Electronic Shutter Speed  
Sense-Up  
Gain Control  
3 DNR  
D-WDR  
Motion Detection  
Privacy  
Mirror  
Freeze  
Sharpness  
D&N Selection  
Digital Zoom  
Blemish Compensation  
Power  
On(*32) / Off  
Auto:128 Point / Manual:4 Point  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA(CDS OFF) / 700mA(CDS ON)  
AC 24V 100mA(CDS OFF) / 250mA(CDS ON)  
DC Auto Iris Varifocal Lens(4mm-9mm)  
65 ft  
-4˚F ~ +140˚F RH 95% Max.  
-4˚F ~ +140˚F RH 95% Max.  
5.47"(Dia) * 3.93"(H)  
Power Consumption  
Lens  
IR Distance  
Operating Temperature/Humidity  
Storage Temperature/Humidity  
Dimension  
1.98 lbs  
Weight  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intense - IR Vandal Dome Camera  
DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in 33 pcs  
CVC5835DNV  
■
■
CVC5835DNVW  
600TV Lines  
DC Auto Iris Varifocal Lens  
(2.8mm-12mm)  
True Day/Night Capability  
ICR-IR Cut Filter Removable  
850nm IR LEDs x 33pcs  
SPECIFICATIONS  
MODEL  
CVC5835DNV / CVC5835DNVW  
1/3" SONY Super HAD ll CCD  
Sensor  
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
2:1 Interlace  
Internal / Line Lock(Option)  
Available  
Total Pixels  
Effective Pixels  
Scanning System  
Synchronization  
O.S.D  
OFF / HSBLC / BLC Selectable  
600TV Lines  
Backlight  
Resolution  
52dB (AGC Off, Weight On)  
0.000006 Lux(IR LED ON)  
ATW / AWB / Manual / AWC →SET  
1/50sec, 1/60sec ~ 1/100,000sec  
Off / Auto(Selectable limit *2 ~ *256)  
High, Middle, Low, Off Selectable  
Off/On (1~50 Level Adjustable)  
Indoor / Outdoor / Off  
On/Off (4 Zone)  
On/Off (8 Zone)  
Off / Mirror / V-Rev / Rotate  
On/Off  
0~31’(Level Adjustable)  
Color /BW/ Auto/ EXT  
S/N (Y signal)  
Min. Illumination  
White Balance  
Electronic Shutter Speed  
Sense-Up  
Gain Control  
3 DNR  
D-WDR  
Motion Detection  
Privacy  
Mirror  
Freeze  
Sharpness  
D&N Selection  
Digital Zoom  
Blemish Compensation  
Power  
On(*32) / Off  
Auto:128 Point / Manual:4 Point  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA(CDS OFF) / 700mA(CDS ON)  
AC 24V 100mA(CDS OFF) / 250mA(CDS ON)  
DC Auto Iris Varifocal Lens(2.8mm-12mm)  
65 ft  
-4˚F ~ +140˚F RH 95% Max.  
-4˚F ~ +140˚F RH 95% Max.  
5.47"(Dia) * 3.93"(H)  
Power Consumption  
Lens  
IR Distance  
Operating Temperature/Humidity  
Storage Temperature/Humidity  
Dimension  
1.98 lbs  
Weight  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Intense - IR Vandal Dome Camera  
DC Auto Iris Varifocal Lens(9mm-22mm) / IR LED Built-in 33 pcs  
CVC5935DNV  
■
■
CVC5935DNVW  
600TV Lines  
DC Auto Iris Varifocal Lens  
(9mm-22mm)  
True Day/Night Capability  
ICR-IR Cut Filter Removable  
850nm IR LEDs x 33pcs  
SPECIFICATIONS  
MODEL  
CVC5935DNV / CVC5935DNVW  
1/3" SONY Super HAD ll CCD  
Sensor  
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)  
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)  
2:1 Interlace  
Internal / Line Lock(Option)  
Available  
Total Pixels  
Effective Pixels  
Scanning System  
Synchronization  
O.S.D  
OFF / HSBLC / BLC Selectable  
600TV Lines  
Backlight  
Resolution  
52dB (AGC Off, Weight On)  
0.000006 Lux(IR LED ON)  
ATW / AWB / Manual / AWC →SET  
1/50sec, 1/60sec ~ 1/100,000sec  
Off / Auto(Selectable limit *2 ~ *256)  
High, Middle, Low, Off Selectable  
Off/On (1~50 Level Adjustable)  
Indoor / Outdoor / Off  
On/Off (4 Zone)  
On/Off (8 Zone)  
Off / Mirror / V-Rev / Rotate  
On/Off  
0~31’(Level Adjustable)  
Color /BW/ Auto/ EXT  
S/N (Y signal)  
Min. Illumination  
White Balance  
Electronic Shutter Speed  
Sense-Up  
Gain Control  
3 DNR  
D-WDR  
Motion Detection  
Privacy  
Mirror  
Freeze  
Sharpness  
D&N Selection  
Digital Zoom  
Blemish Compensation  
Power  
On(*32) / Off  
Auto:128 Point / Manual:4 Point  
DC 12V / AC24V(Dual Voltage)  
DC 12V 250mA(CDS OFF) / 700mA(CDS ON)  
AC 24V 100mA(CDS OFF) / 250mA(CDS ON)  
DC Auto Iris Varifocal Lens(9mm-22mm)  
65 ft  
-4˚F ~ +140˚F RH 95% Max.  
-4˚F ~ +140˚F RH 95% Max.  
5.47"(Dia) * 3.93"(H)  
Power Consumption  
Lens  
IR Distance  
Operating Temperature/Humidity  
Storage Temperature/Humidity  
Dimension  
1.98 lbs  
Weight  
- 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA DIMENSION  
1) CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW,  
CVC5935DNV, CVC5935DNVW  
5.47” dia  
5.47” dia  
3.93” dia  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Control Button  
1. Type A, Type B, Type C of OSD button could be used when it needs to  
OSD control.  
2. Type D is extra Option (wired Remote controller)  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Set Up the camera menu  
●
Setup Menu  
;ͶͿΆ  
ͳ΃ͺ͸͹΅ͿͶ΄΄͙͑͡ί͑͢͡͡ͲΕΛΦΤΥΒΓΝΖ͚  
΄Ͷ΅͑Ά΁͑;ͶͿΆ  
͵ͶͷͲΆͽ΅͑΄Ͷ΅  
͵ʹ  
΃Ͷ΅  
ͶͿ͵  
ͽͶͿ΄  
΃Ͷ΅Ά΃Ϳ  
;ͲͿΆͲͽ  
ͲΆ΅΀ͧͦ͑͢͢͝͠͡͝͠͡͝ͷͽͼ͑ͣͦ͑ͦ͑͑ͣ͑ͦ͢͢͢͢͢͢͝͠͡͝͠͡͡͝͠͡͡͡͝͠͡͡͡͝͠͡͡͡͝  
͑͢͢͢͢͠͡͡͡͡͝͠͡͡͡͡͡͝Ωͣͦͧ͑͝Ωͣͩ͑͢͝Ωͧͥ͑͝Ωͤͣ͑͝Ωͧ͑͢͝Ωͩ͑͝Ωͥ͑͝Ωͣ  
΄͹Ά΅΅Ͷ΃  
΀ͷͷ  
ͽ΀Έ͑  
Ͳ͸ʹ  
;ͺ͵͵ͽͶ  
͹ͺ͸͹  
΀ͷͷ  
΄ͶͿ΄Ͷ͞Ά΁͙Ωͣ͑ί͑Ωͣͦͧ͑ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚  
΄ͶͿ΄Ͷ͞Ά΁  
ͲΆ΅΀  
΀ͷͷ  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
ͽ΀Έ  
͸ͲͺͿ  
;ͺ͵͵ͽͶ  
͹ͺ͸͹  
΁΀΄ͺ΅ͺ΀Ϳ  
΄ͺ΋Ͷ  
ͳͽʹ  
Ͳ΃ͶͲ  
Ͳ͸ͲͺͿ  
͵ͶͷͲΆͽ΅  
΃Ͷ΅Ά΃Ϳ  
ͽͶ·Ͷͽ  
΃Ͷ΅  
ͳͽʹ  
ͶͿ͵  
ͶΉ΁΀΄Ά΃Ͷ  
͡ίͩ͑΄ΖΝΖΔΥΒΓΝΖ  
Ͳͽͽ͑͵ͲΊ  
Ϳͺ͸͹΅͑΀ͿͽΊ  
΁΀΄ͺ΅ͺ΀Ϳ  
΄ͺ΋Ͷ  
;΀͵Ͷ  
͹΄ͳͽʹ  
Ͳ΃ͶͲ  
Ͳ͸ͲͺͿ  
͵ͶͷͲΆͽ΅  
΃Ͷ΅Ά΃Ϳ  
΃Ͷ΅  
ͶͿ͵  
ͽ΀Έ͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚  
͹ͺ͸͹͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚  
ͺͿ͵΀΀΃  
΃Ͷ΅  
΃Ͷ΅Ά΃Ϳ  
ͶͿ͵  
͵͞Έ͵΃  
ͽ΀Έ͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚  
͹ͺ͸͹͞ͽͶ·Ͷͽ͙͑͑͡ίͦ͑͢ͲΕΛΦΤΥΒΓΝΖ͚  
΀Ά΅͵΀΀΃  
΃Ͷ΅  
΃Ͷ΅Ά΃Ϳ  
ͶͿ͵  
΀ͷͷ  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
Ͳ΅Έ  
ͲΈͳ  
ͲΈʹͯ͞΄Ͷ΅  
ͳͽΆͶ͙͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚  
΃Ͷ͵͙͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚  
Έ͹ͺ΅Ͷ͑ͳͲͽ  
;ͲͿΆͲͽ  
΃Ͷ΅  
΃Ͷ΅Ά΃Ϳ  
ͶͿ͵  
ͺͿ͵΀΀΃  
΀Ά΅͵΀΀΃  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ʹ΀ͽ΀΃  
ͲΆ΅΀  
ͶΉ΅  
͵ͶͽͲΊ͙͑͑͡ίͧͤ͑ͲΕΛΦΤΥΒΓΝΖ͚  
͵ͯ͞Ϳ͙Ͳ͸ʹ͚͙͑ͥͩ͑ίͣͩ͑͡ͲΕΛΦΤΥΒΓΝΖ͚  
Ϳͯ͞͵͙Ͳ͸ʹ͚͙͑͑͡ίͧ͑͢͡ͲΕΛΦΤΥΒΓΝΖ͚  
΃Ͷ΅͑  
΃Ͷ΅Ά΃Ϳ  
ͶͿ͵  
͵ͲΊ͠Ϳͺ͸͹΅  
ͳΆ΃΄΅  
΀Ϳ͠΀ͷͷ  
΀Ϳ  
͸ͲͺͿ  
Ͳ΃ͶͲ  
ͳ͠Έ  
ͺ΃͑΄;Ͳ΃΅  
΃Ͷ΅Ά΃Ϳ͙͑΃Ͷ΅͠ͶͿ͵͚  
΀ͷͷ  
ͽͶ·Ͷͽ͙͑΃ͲͿ͸Ͷ͑͑͡ί͑͢͡͡ͽΖΧΖΝ͑΄ΖΝΖΔΥΒΓΝΖ͚  
΀Ϳ  
΃Ͷ΅  
΃Ͷ΅Ά΃Ϳ  
ͤ͵Ϳ΃  
ͶͿ͵  
΀ͷͷ  
ʹͲ;͑΅ͺ΅ͽͶ  
΀Ϳ͠΀ͷͷ  
ͷ΃ͶͶ΋Ͷ  
΀Ϳ͠΀ͷͷ  
;ͺ΃΃΀΃  
·͞ͷͽͺ΁  
΃΀΅Ͳ΅Ͷ  
΀ͷͷ  
;ͺ΃΃΀΃  
͵͞΋΀΀;͙͑Ω͑͢ί͑Ω͚ͤͣ  
΁ͲͿ͙͑͑͢͞͡͡ί͚͑͢͡͡  
΅ͺͽ΅͙͑͑͢͞͡͡ί͚͑͢͡͡  
΃Ͷ΅Ά΃Ϳ͙͑΃Ͷ΅͠ͶͿ͵͚  
͵͞ͶͷͷͶʹ΅  
͵͞΋΀΀;  
΀Ϳ  
ͿͶ͸͑͟ͺ;Ͳ͸Ͷ  
΃Ͷ΅Ά΃Ϳ  
΀Ϳ͠΀ͷͷ  
΃Ͷ΅  
ͶͿ͵  
ʹͲ;͑ͺ͵  
ͺ͵͑͵ͺ΄΁ͽͲΊ  
ͳͲΆ͵΃Ͳ΅Ͷ  
΃Ͷ΅Ά΃Ϳ  
΀Ϳ͠΀ͷͷ  
΃΄ͥͩͦ  
͙΀΁΅ͺ΀Ϳ͚  
΃Ͷ΅  
ͶͿ͵  
Ͳ΃ͶͲ͑΄ͶͽͶʹ΅͙͑Ͳ΃ͶͲ͑͢ί͑Ͳ΃ͶͲ͚ͥ  
΁΀΄ͺ΅ͺ΀Ϳ  
Ͳ΃ͶͲ͑͵ͺ΄΁ͽͲΊ  
΄ͺ΋Ͷ  
΄΁ͶʹͺͲͽ  
Ͳ͸ͲͺͿ  
΀Ϳ  
;΀΅ͺ΀Ϳ  
΄ͶͿ΄ͺ΅ͺ·ͺ΅Ί͙͑͑͡ί͚͑ͥ͡  
;΀΅ͺ΀Ϳ͑·ͺͶΈ  
΃Ͷ΅Ά΃Ϳ  
΀Ϳ͠΀ͷͷ  
΃Ͷ΅  
ͶͿ͵  
΀ͷͷ  
΀Ϳ  
Ͳ΃ͶͲ͑΄ͶͽͶʹ΅  
Ͳ΃ͶͲ͑͵ͺ΄΁ͽͲΊ  
΁΀΄ͺ΅ͺ΀Ϳ  
΄ͺ΋Ͷ  
Ͳ͸ͲͺͿ  
΁΃ͺ·ͲʹΊ  
ʹ΀ͽ΀΃  
΃Ͷ΅Ά΃Ϳ  
΃Ͷ΅  
ͶͿ͵  
΀ͷͷ  
ͺͿ΅  
ͽ͠ͽ  
΄ΊͿʹ  
͙΀΁΅ͺ΀Ϳ͚  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
΄ͶͿ΄Ͷ͞Ά΁͙͑Ωͥ͑ί͑Ω͚ͧͥ  
͵ͺͷͷͶ΃ͶͿʹͶ͙͑͑͢ί͚ͧ  
΄΅Ͳ΃΅  
͵ͶͷͶʹ΅  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
͑͡ίͤ͑͢ͽΖΧΖΝ͑ͲΕΛΦΤΥΒΓΝΖ  
ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ  
΄͹Ͳ΃΁ͿͶ΄΄  
ͳͽΆͶ͑͸ͲͺͿ͙͑͑͡ί͚͢͡͡  
΃Ͷ͵͑͸ͲͺͿ͙͑͑͡ί͚͢͡͡  
ʹ΃΅  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
͸Ͳ;;Ͳ͙͑Ά΄Ͷ΃͑ί͚͑͢͟͡͡  
ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ  
ͳͽΆͶ͑͸ͲͺͿ͙͑͑͡ί͚͢͡͡  
΃Ͷ͵͑͸ͲͺͿ͙͑͑͡ί͚͢͡͡  
ͽʹ͵  
;΀Ϳͺ΅΀΃  
Ͳ͵ͻΆ΄΅  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
͸Ͳ;;Ͳ͙͑Ά΄Ͷ΃͑ί͚͑͢͟͡͡  
ͽͶ·Ͷͽ͙͑͑͡ί͚ͧͤ  
ͳͽΆͶ͑͸ͲͺͿ͙͑͑͡ί͚͢͡͡  
΃Ͷ͵͑͸ͲͺͿ͙͑͑͡ί͚͢͡͡  
Ά΄Ͷ΃  
΃Ͷ΅  
ͶͿ͵  
΃Ͷ΅Ά΃Ϳ  
΃Ͷ΅  
΃Ͷ΅Ά΃Ϳ  
ͶͿ͵  
΃Ͷ΄Ͷ΅  
΃Ͷ΅  
ͷͲʹ΅΀΃Ί  
΃Ͷ΅Ά΃Ϳ  
΃Ͷ΄Ͷ΅  
ͶΉͺ΅  
ͶͿ͵  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Set Up  
Menu items can be selected by using the OSD buttons of the camera  
1. Press the Set Up button.  
* The Set Up menu will be displayed on the monitor.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
COLOR  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
2. Move and select the required function using the Up and Down button.  
* Move the arrow indicator Up or Down to select the desired feature by pressing  
the Up or Down button.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
COLOR  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Change menu settings using the Left or Right button.  
* Available values or Status are displayed by pressing the Left or Right buttons.  
Press the button until desired value / status is displayed.  
4. After Changing the setting move the arrow indicator to EXIT and press the  
SET button to EXIT.  
NOTE  
* Move to the available submenu by moving  
arrow to desired feature.  
* Submenu is not available when this symbol is display "- - - -"  
Lens  
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.  
2. Select the desired lens type by pressing the Left or Right button.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
COLOR  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
DC:DC Auto Iris Lens  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
* When DC is selected, the brightness can be adjusted. The brightness control  
range is 1 ~ 100.  
Lens  
BRIGHTNESS  
RETURN  
100  
3. Press the RETURN to return to the SETUP menu.  
Exposure  
This function is used to select Automatic or Manual shutter speed control.  
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.  
2. Select the desired shutter mode by pressing the Left or Right button.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
COLOR  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXPOSURE  
SHUTTER  
AGC  
SENS-UP  
BLC  
AUTO  
MIDDLE  
AUTO  
OFF  
D-WDR  
RETURN  
OFF  
RET  
NOTE  
*Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed  
from 1/60, FLK, 1/250~1/100,000.  
→FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric  
light. If select FLK mode, sense-up does not operate.  
* AGC(AUTO GAIN CONTROL):  
A higher gain increases brightness but also increases any noise.  
OFF : Deactivates the AGC function  
LOW : Sets automatic gain control to LOW.  
MIDDLE : Sets automatic gain control to MIDDLE.  
HIGH : Sets automatic gain control to HIGH  
* SENS - UP:  
At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x256.  
SENS-UP  
SENS-UP  
RETURN  
x 4  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
* RETURN:  
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.  
NOTE  
* Pressing the SET button in AUTO mode allows adjustment of image brightness  
by increasing or decreasing the shutter speed (x2 ~x256).  
* The higher the level, the brighter the image becomes, but it is possible that an  
after image (ghosting) could appear.  
* When SENS-UP is activated the increased magnification can induce noise and  
pixelation; this is quite normal.  
Back Light(BLC)  
This camera witch is using 3D-DNR DSP provides intelligent light level control to overcome  
even strong backlight conditions.  
BLC  
GAIN  
AREA  
DEFAULT  
RETURN  
MIDDLE  
RET  
* OFF: BLC function does not operate.  
* BLC: Select LOW/MID/HIGH  
User can select and define a specific area in scene and view the area clearly.  
Press the "ENTER" button at the AREA menu, you can change the area like a picture 1.  
Press the "ENTER" button again after area setting, you can change the area like a picture 2.  
Default: Press the Default to return to factory defaults.  
- 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POSITION  
SIZE  
PICTURE 1  
PICTURE 2  
* HSBLE: HSBLC function is especially effective for reading car number plates at the night time.  
You can select and define the required observation area for the target object and ignore a strong light area.  
Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1.  
Press the "ENTER" button again after area setting, you can change the position as shown in Picture 2.  
Default: Press the Default to return to factory defaults.  
HSBLC  
LEVEL  
5
MODE  
ALL DAY  
RET  
AREA  
DEFAULT  
RETURN  
POSITION  
SIZE  
PICTURE 1  
PICTURE 2  
- 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HSBLC OFF  
HSBLC ON  
* D-WDR: This camera which is using 3D-DNR DSP provides intelligent light level control to overcome even  
strong backlight conditions.  
→OFF: D-WDR function does not operate.  
When there are simultaneous bright & dark image area WDR makes them both distinct and can be selected  
as OUTDOOR and INDOOR.  
D-WDR  
LOW-LEVEL  
HIGH-LEVEL  
RETURN  
5
5
RET  
D-WDR OFF  
D-WDR ON  
* RETURN: Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu.  
- 23 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
White Balance  
The White Balance function is used to control the “on-screen” colors.  
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.  
2. Select the desired mode by using the Left or Right button.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
COLOR  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
* There are three user selectable White Balance settings available.  
* ATW : (Auto Tracking White Balance)  
Normal setting; when the color temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)  
* AWB : The White Balance is automatically adjusted in a specific environment.  
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white  
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.  
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then  
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and  
B-Gain(Blue) while monitoring the color of the image.  
WHITE BAL MANUAL  
BLUE  
40  
21  
RED  
RETURN  
RET  
- 24 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Day / Night  
Picture can be displayed in either colour of black and white.  
1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
AUTO  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
2. Select the desired mode using the Left and Right buttons.  
* COLOR : The picture is always displayed in color.  
* BW : This picture is always displayed in black and white.  
Select BW using the button and press the menu to activate COLOR BURST option.  
IR SMART : It controls the IR LED(bright portion base), satuation is not expected.  
DAY NIGHT  
B/W  
BURST  
ON  
IR SMART  
RETURN  
ON  
RET  
- 25 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IR SMART  
GAIN  
10  
SIZE  
AREA  
RETURN  
RET  
AREA  
SMART IR OFF  
SMART IR ON  
→ AUTO: The mode will automatically switches to COLOR in normal condition and switches to BW mode  
when ambient illumination is low.  
Press the SET button to set the switching time or D→N(AGC), N→D(AGC) in AUTO mode.  
DAY & NIGHT  
AUTO  
RET  
DELAY  
5
D→N(AGC)  
N→D(AGC)  
RETURN  
170  
70  
- 26 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3DNR  
3DNR is used to reduce the level of background noise in a low luminance environment.  
1. Move the arrow indicator to 3DNR by using the Up and Down button.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
AUTO  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
2. Select whether or not to activate 3DNR by using the Left and Right buttons.  
* ON: Activates 3DNR - Digial noise reduction can be adjusted between 0 ~ 100.  
* OFF: Deactivates 3DNR - noise is not reduced.  
3DNR  
LEVEL  
50  
RETURN  
RET  
* Select RETURN by using the Up or Down button to return to Set Up menu.  
- 27 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special  
When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
AUTO  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
Select one of the mode using the Up and Down button.  
SPECIAL  
1. CAM TITLE  
2. D - EFFECT  
3. MOTION  
OFF  
OFF  
OFF  
4. PRIVACY  
5. DEFECT  
6. RETURN  
RET  
1. CAM TITLE : When input, the Camera ID is displayed on the monitor.  
1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen.  
1-2) Set to ON using the Left or Right button.  
- 28 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
* When CAMERA TITLE is set to OFF, the CAMERA TITLE is not displayed on the monitor.  
1-3) Press the SETUP button.  
CAMERA TITLE  
0 1 2 3 4 5 6 7 8 9  
A B C D E F G H I J K L M  
N O P Q R S T U V W X Y Z  
▷
→ ← ↑ ↓ ( ) -  
ㅡ _ □ / = & : ~ , .  
← →  
C L R  
P O S  
E N D  
1-4) The CAMERA TITLE can be up to 15 alphanumeric characters in length.  
① Move the cursor to choose an alphanumeric character.  
CAMERA TITLE  
0 1 2 3 4 5 6 7 8 9  
A B C D E F G H I J K L M  
N O P Q R S T U V W X Y Z  
▷
→ ← ↑ ↓ ( ) -  
ㅡ _ □ / = & : ~ , .  
← →  
C L R  
P O S  
E N D  
② Choose a character in displayed range A~Z, a~z, 0~9 using the Up, Down, Left and Right buttons.  
③ Select the desired character by pressing the SETUP button.  
- The cursor moves to the next position, after character input, by pressing the SETUP button.  
④ Repeat the above steps until the Camera ID has been created.  
- 29 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE  
* In cases where the wrong Camera ID has been input........  
Move the cursor to CLR and press SETUP button to erase characters from left to  
right, and repeat the above steps to input the characters again.  
1-5) To select the position where the Camera ID should be displayed on the screen.  
① Move the cursor to POS and press the SET button.  
CAMERA TITLE  
0 1 2 3 4 5 6 7 8 9  
A B C D E F G H I J K L M  
N O P Q R S T U V W X Y Z  
▷
→ ← ↑ ↓ ( ) -  
ㅡ _ □ / = & : ~ , .  
← →  
C L R  
P O S  
E N D  
② Created camera ID is displayed.  
(Factory default position)  
CAM1  
- 30 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
③ Select a new position by using the four  
directional button, Press the SET button to  
confirm the position.  
CAM1  
2. D - EFFECT  
Move the cursor to D-EFFECT and press the SET button to set the other image functions.  
D-EFFECT  
FREEZE  
MIRROR  
D-ZOOM  
RETURN  
OFF  
OFF  
OFF  
RET  
2 -1) MIRROR : Flip the image horizontally on the screen.  
D-EFFECT  
FREEZE  
MIRROR  
D-ZOOM  
RETURN  
OFF  
OFF  
OFF  
RET  
- 31 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
* V-FLIP : Flip the image vertically on the screen.  
* ROTATE : Flip the horizontal image vertically on the screen.  
* OFF : Disabled.  
MIRROR ON  
MIRROR OFF  
2-2) D - ZOOM: Digital zoom available, range x1 ~ x32.  
PAN : The pan range can be controlled between -10 ~ + 100  
TILT : The tilt range can be controlled between -10 ~ + 100  
D-ZOOM  
D-ZOOM  
PAN  
X 10  
TILT  
RETURN  
RET  
NOTE  
* PAN and TILT function should be available when using the digital zoom.  
- 32 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-3) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.  
2-4) NEG. IMAGE :  
ON : Activates negative image just like film  
OFF : Normal image  
2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.  
3. MOTION  
MOTION  
AREA SELECT  
AREA DISPLAY  
SENSITIVITY  
MOTION VIEW  
RETURN  
AREA1  
ON  
40  
OFF  
RET  
POSITION  
SIZE  
3-1) When the special menu screen is displayed, use the Up or Down button to access the MOTION menu.  
AREA SELECT : You can select from area 1~4 position.  
AREA DISPLAY) ON: Display the Motion Detected area on the screen. You can set the location and size like picture 1,2.  
SENSITIVITY: To setup the motion sensitivity. You can adjust the motion sensitivity of a movement between  
level 0~40.  
MOTION VIEW : If camera detects movement, the words of "MOTION DETECTION" will appear on the monitor.  
RETURN : To return to the SPECIAL menu after completing the setup.  
- 33 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. PRIVACY  
Hide an area you want to hide on the screen.  
4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY.  
PRIVACY  
AREA SELECT  
AREA DISPLAY  
COLOR  
AREA1  
ON  
15  
RETURN  
RET  
POSITION  
SIZE  
4-2). Set up the area mode using the 4 direction buttons.  
① AREA SELECT : You can select up to 8 MD area.  
② AREA DISPLAY : OFF : Disabled  
ON :Activates area display  
- 34 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
③ Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the  
Left / Right button between the level 0 ~ 100.  
④ Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the  
Left / Right button between the level 0 ~ 100.  
⑤ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by  
using the LEFT or RIGHT button.  
⑥ Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left /  
Right button to select between the 15 different color.  
RETURN : Move the arrow indicator to RETURN after completing the setup to return to SPECIAL menu.  
4-3) SYNC : INT (Internal Synchronisation)  
Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.  
5. DEFECT  
You can eliminate white spots (defect) up to max 128 point.  
SENSE-UP : To eliminate defect, set the high level of sense-up. You can set to max 64x, but 32x is best  
to eliminate defect.  
DIFF : You can set the size of DEFECT from 1 to 6.  
START : Press the "ENTER" button, it will start to eliminate defects "PROCESSING NOW..." will be displayed  
on the monitor.  
In case of manual IRIS lens, you should cover the lens.  
DEFECT  
SENSE-UP  
DIFF  
START  
x32  
COVER THE LENS  
THEN  
4
PROCESSING NOW...  
RETURN  
RET  
PRESS ENTER KEY  
- 35 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUST  
1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
AUTO  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
2. Select the desired mode by using Up or Down button.  
ADJUST  
20  
SHARPNESS  
MONITOR  
RETURN  
LCD  
RET  
SHARPNESS : Improving image clarity. The level can be adjusted to obtain an improved image.  
However, when the level is set too high it can distort the image or cause noise.  
You can adjust from level 1 to 31, and can set to monitor function as LCD, CRT and USER.  
MONITOR  
LCD  
0.50  
MONITOR  
CRT  
MONITOR  
USER  
0.50  
GAMMA  
LEVEL  
BLUE GAIN  
RED GAIN  
RETURN  
LEVEL  
GAMMA  
LEVEL  
BLUE GAIN  
RED GAIN  
RETURN  
20  
20  
92  
BLUE GAIN  
RED GAIN  
RETURN  
20  
20  
92  
20  
20  
92  
RET  
RET  
RET  
- 36 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESET  
Resets the camera settings to the factory defaults.  
SETUP  
RESET  
1.LENS  
DC  
FACTORY  
RETURN  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
RET  
ATW  
AUTO  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
EXIT  
Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.  
SETUP  
1.LENS  
DC  
2.EXPOSURE  
3.WHITE BAL  
4.DAY / NIGHT  
5.3DNR  
ATW  
AUTO  
ON  
6.SPECIAL  
7.ADJUST  
8.RESET  
9.EXIT  
- 37 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trouble Shooting  
PROBLEM  
POSSIBLE CAUSE  
☞
Check the power cable, power supply output and video  
Northing appears on  
connection between the camera and monitor.  
the screen.  
☞
Are the camera lens or the lens glass dirty?  
Clean the lens / glass with a soft clean cloth.  
Adjust the monitor controls, as required.  
If the camera is facing a very strong light, change  
the camera position.  
The image on the  
screen is dim.  
☞
☞
☞
Adjust the lens focus.  
☞
☞
Adjust the contrast control of the monitor.  
The image on the  
screen is dark.  
If there is an intermediate device, correctly set the 75Ω/Hi-z.  
The camera is not  
working properly  
and the surface of  
the camera is hot.  
☞
Check the camera is correctly connected to an appropriate  
regulated power source.  
☞
☞
Has MOTION DET been set to ON in the menu?  
Motion Detection  
is not activated.  
Has MD AREA been properly defined?  
The color of the  
☞
☞
Check the settings in WHITE BALANCE menu.  
picture is not correct.  
The image on the  
Make sure that the camera isn’t facing direct sunlight or  
screen flickers.  
fluorescent lighting. If necessary,change the camera position.  
☞
☞
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.  
Check the EXPOSURE menu and make sure SHUTTER is set to------.  
The SENS-UP does  
not work.  
- 38 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 39 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- MEMO -  
- 40 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- MEMO -  
- 41 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- MEMO -  
- 42 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
200 New Highway  
Amityville, NY 11701  
631-957-8700  
1 800 645 5516  
www.specotech.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone GA 2 User Manual
Sharp Flat Panel Television LC 22SV2U User Manual
Sharp Projector DT 400 User Manual
Sony DVD Player 3 283 149 222 User Manual
Sony Microcassette Recorder M 450 User Manual
Speco Technologies Microphone MCBM 300 User Manual
Sterling Plumbing Musical Table scc2 User Manual
Sungale Cable Box STB370 User Manual
Sun Microsystems Network Card SunSwiftTM User Manual
Swann Security Camera SWA31 C8 User Manual