Sony Security Camera SNC P5 User Manual

http://192.168.0.100/en/index.html

Select User setting.

Insert a recommended CF memory card that

includes the HTML file of your original home page

into the CF card slot of the camera.

Date & time Tab

Select “A-slot” in “Select root directory”.

Input the pass of the page you want to display in the

text box. (up to 64 letters and numbers)

Tip

Even when you select User setting, the home page

inside the camera can be displayed by typing the

following URL in the address box of the browser.

Example: When the IP address of the camera is set to

192.168.0.100

Exclusive control mode

Controls the authority to operate PanTilt, Zoom and

some functions of the camera.

Current date & time

When Off is selected, multiple uses can control PanTilt

and Zoom at the same time. When multiple users control

them at the same time, the operation by the user accessed

later has priority.

When On is selected, only one user can control. Set the

operation time for one user in Operation time.

If a user tries to operate during operation by another

user, the authority is controlled by the settings of

Operation time and Maximum wait number.

Displays the date and time set on the camera.

Note

After you have purchased the camera, be sure to check

the date and time of the camera and set them if

necessary.

PC clock

Displays the date and time set on your computer.

Date & time format

Operation time

Sets the time length for a user having the control

authority. Selectable range is from 10 to 600 seconds.

This is effective when Exclusive control mode is On.

Select the format of date and time to be displayed on the

main viewer from the list box.

You can select from among yyyy-mm-dd hh:mm:ss

(year-month-day hour:minute:second), mm-dd-yyyy

hh:mm:ss (month-day-year hour:minute:second), and

Configuring the System — System setting menu

Download from Www.Somanuals.com. All Manuals Search And Download.

dd-mm-yyyy hh:mm:ss (day-month-year

hour:minute:second).

Initialize Tab

Adjust

Select to set the day and time.

Keep current setting: Select when you do not need to

set the date and time.

Synchronize with PC: Select when synchronizing the

camera’s date and time with those of the computer.

Manual setting: Select when you want to set the

camera’s date and time manually.

Select the lower 2-digits of year, month, date, hour,

minutes and seconds from each drop-down list.

Synchronize with NTP: Select when synchronizing the

camera’s date and time with those of the time sever

called NTP server (Network Time Protocol). Set the

NTP saver name and the Interval time.

NTP server name

Type the host name or IP address of the NTP server, up

to 64 characters.

Reboot

Reboots the camera.

Click Reboot, and “The SNC-P5 will be rebooted. Are

you sure?” appears. Click OK to reboot the camera. It

takes about two minutes to start again.

Interval time

Select the interval at which you want to adjust the

camera’s time referring to the NTP server’ time,

between 1 and 24 hours. The set interval is a guide, and

does not indicate the exact time.

Factory default

Resets the camera to the factory settings.

Note

Click Factory default, and “Set up data will be

initialized. Are you sure?” appears. When you click

OK, the network indicator on the camera starts to blink.

After adjustments of the default settings have finished,

the camera reboots automatically. Do not turn off the

camera until the camera reboots.

The setting time may not accord with the exact time

according to the network environment.

Time zone

Set the time difference from Greenwich Mean Time in

the area where the camera is installed.

Select the time zone where the camera is installed from

the list box.

Tip

You can also reset the camera to the factory setting by

turning on the power while pressing the reset switch of

the camera. For details, refer to the supplied Installation

Manual.

Automatically adjust clock for daylight saving

time changes

When you select it, the clock is automatically adjusted

according to the daylight saving time of the selected

time zone.

Backup setting data

Saves the setting data of the camera in a file.

Click Save, and follow the instructions on the browser to

specify the folder and save the setting data of the

camera. The file name preset at the factory is “snc-

p5.cfg.”

Note

If the time zone selected on the Time zone menu is

different from that set on the computer, the time is

adjusted using the time zone difference and set on the

camera.

Restore setting

Loads the stored setting data of the camera.

Click Browse and select the file in which the setting data

is stored. Then, click OK, and the camera is adjusted

according to the loaded data and restarted.

OK/Cancel

Configuring the System — System setting menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Access log tab

Note

With Restore setting, some items in the Network setting

menu (page 41) cannot be restored.

Delete user setting URL

By pressing Delete, you can delete the home page

recorded on the flash memory of the camera with

Custom Homepage Installer (page 71).

Delete panorama image

By pressing Delete, you can delete the panorama image

recorded on the camera with SNC panorama creator

(page 70).

Firmware upgrade

Use this when upgrading the camera software. Click

Browse and specify the file for upgrading, then click

OK. “Upgrade firmware? Are you sure?” is displayed.

Click OK and upgrading starts. After completion, the

camera starts again.

Access log

The access record of the camera is displayed.

Click Reload to reload to the latest data.

Notes

• Use only the upgrade up file special to this camera. If

you do not, a problem may occur.

• Do not turn off the camera until the upgrading will be

completed.

System log Tab

System log

The data of the software activity of the camera are

recorded in this. It includes data that are useful when a

problem occurs.

Click Reload to reload to the latest data.

Configuring the System — System setting menu

Download from Www.Somanuals.com. All Manuals Search And Download.

When you select On, set Multicast address, Multicast

video port number and Multicast audio port number

properly.

Setting the Camera

Image and Audio

— Camera setting Menu

Multicast address: Type the multicast address used on

the Multicast streaming.

Multicast video port number: Specify the video

transmission port number used on the Multicast

streaming.

When you click Camera on the Advanced mode menu,

the Camera setting menu appears.

Use this menu to set the functions of the camera.

The Camera setting menu consists of five tabs,

Common, Picture, MPEG4, JPEG and Reset.

Multicast audio port number: Specify the audio

transmission port number used on the Multicast

streaming.

Image size

You can select the image size sent from the network

camera.

Common Tab

640 × 480 (VGA), 480 × 360, 384 × 288, 320 × 240

(QVGA), 256 × 192 or 160 × 120 (QQVGA) can be

selected.

Cropping

When the image size is set to 640 × 480 (VGA), you can

crop a portion of the image and display the cropped

image on the computer. With the cropping, the

transmitting data size, and thus, the network load is

reduced and a higher frame rate is obtained.

Select On for cropping the image, or Off for no

cropping.

Notes

• When Cropping is set to On, Motion detection

function does not work.

• While Cropping is set to On, the image of the

composite video signal output from the video output

connector of the camera may be distorted.

Video mode

Select the output format of the camera image.

MPEG4 or JPEG can be selected.

Unicast streaming

To crop an image

Specify the transmission port number of the video data

and audio data used when UDP (Unicast) is selected

with the TCP/UDP transmission switching icon in the

main viewer, when the Video mode is set to MPEG4.

Video port number: Specify the transmission port

number of the video data. It is initially set to 50000.

Specify an even number from 1024 to 65534.

Audio port number: Specify the transmission port

number of the audio data. It is initially set to 50002.

Specify an even number from 1024 to 65534.

Set the Image size to 640 × 480(VGA).

The Cropping is displayed.

Set the Cropping to On and click the Area setting

button.

The Area setting display appears.

Specify the cropping area.

Multicast streaming

Set whether the camera uses the Multicast streaming or

not. It reduces sending load on the camera by making the

computer of the same segment network (not above the

router) receive the same transmitting data.

Select On to allow the multicast sending and Off not to

allow.

Setting the Camera Image and Audio — Camera setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Click the left button of the mouse on the still image

and drag it diagonally. The red frame that appears

as you drag indicates the cropping area.

Speaker output

Set whether you output the audio which is input to the

audio input connectors of your computer to the speaker

(active speaker for example) connected to the camera

line output connectors by using SNC audio upload tool

included in the supplied CD-ROM.

Still image

Select On to accept the audio data transmission from

SNC audio upload tool.

OK/Cancel

Picture Tab

Red trimming Click the left button of the mouse on

You can set the color condition, exposure, etc. of the

camera.

frame

the still image and drag it.

Click OK at the bottom of the window.

The cropped image is displayed on the main viewer.

To close the image, click

corner.

in the upper-right

Color

Select Color or Monochrome for the image.

Microphone

Select whether you send the audio from the built-in

microphone or the m microphone input connector.

Select On to send the audio from this network camera.

Note

When you change the Microphone setting, click

Refresh of the browser to reflect the change in the

opening main viewer page.

White balance

Select the white balance mode from among Auto,

Indoor, Outdoor, One push WB, and Manual.

Auto: to automatically adjust the white balance

Indoor: to adjust the white balance for shooting indoors

(about 3200 K)

Mic volume

Set the volume level of the audio input from the built-in

microphone or the m microphone input connectors. It is

adjustable from –10 to +10.

Outdoor: to adjust the white balance for shooting

outdoors (about 5800 K)

One push WB: The One push trigger button is

displayed. Click the button to adjust the white

balance instantly.

Manual: When you select this, R Gain and B Gain are

displayed and you can set them.

Audio codec

Select the bit rate when you send the audio from the

built-in microphone or the m microphone input

connectors. G.711 (64kbps), G.726 (40kbps), G.726

(32kbps), G.726 (24kbps) or G.726 (16kbps) can be

selected.

Selectable gain values are from 0 to 255.

Exposure mode

Note

Select the exposure mode of the camera from among

Full auto, Shutter priority, Iris priority, and Manual.

The setting items required for each setting appear.

When the bit rate is set to other than G.711(64bps), the

audio is not output in the case you are using Java applet

viewer.

Setting the Camera Image and Audio — Camera setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Full auto: The camera executes the gain adjustment and

the iris adjustment automatically. In this case, the

shutter speed is fixed. (1/30 sec.)

when a small value is selected. The value among –5 to 5

can be set.

Saturation

Select the saturation in 7 steps, from –3 to 3.

Selecting 3 gives the image with the highest saturation.

When you select this, Flickerless mode, Slow

shutter and Backlight compensation are displayed

and you can set them as you require.

Shutter priority: The camera executes the gain

adjustment and the iris adjustment automatically and

you can select the shutter speed. When you select it,

Shutter speed is displayed and you can set it.

Iris priority: Gain and Shutter speed of the camera can

be adjusted automatically, and Iris can be selected.

When it is selected, Iris is displayed and it can be set.

Manual: You can set the exposure manually. When you

select it, Shutter speed, Gain and Iris are displayed

and you can set them.

Sharpness

Select the sharpness in 7 steps, from –3 to 3.

Selecting 3 gives the image with the highest sharpness.

Contrast

Select the contrast in 7 steps, from –3 to 3.

Selecting 3 gives the image with the highest contrast.

OK/Cancel

According to the Exposure mode, the following setting

options are displayed.

Flickerless mode

If the image is flickering by the fluorescent light, select

On to reduce it.

User preset

You can save the present settings in the camera as the

custom, or you can load the settings saved in the camera.

Save: Click to save the present settings of the Picture

tab.

In this case, the shutter speed is fixed to 1/50 second.

Note

Load: Click to load the saved settings. To use them,

click OK.

This mode is available only for CE model.

Slow shutter

Set the Slow shutter. When On is selected, auto

exposure setting including the long time exposure is set

to suit to the brightness of the scene.

Backlight compensation

You can set On or Off of the backlight compensation.

When you select On, the backlight compensation

function starts to work.

Shutter speed

Select the shutter speed of the camera from the list box.

Selectable values of the shutter speed are 1/10000,

1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/100, 1/50, 1/30,

1/15, 1/8, 1/4, 1/2 and 1second.

Iris

Select the iris from the list box.

Selectable values of the iris are as follows.

Close/ F28/ F22/ F19/ F16/ F14/ F11/ F9.6/ F8.0/ F6.8/

F5.6/ F4.8/ F4.0/ F3.4/ F2.8

Gain

Select the gain from the list box.

Selectable values of the gain are 0, 6, 12 and 18 dB.

Brightness

Tweaks the exposure set in the exposure mode. It is

brighter when a large value is selected, and it is darker

Setting the Camera Image and Audio — Camera setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

OK/Cancel

MPEG4 Tab

JPEG Tab

Frame rate

Set the frame rate of the MPEG image.

Selectable values are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30

fps.

The unit is “fps” (frame number sent per a second).

Frame rate

Set the maximum frame rate of JPEG image that can be

monitored on the computer.

Selectable values are 5, 6, 8, 10, 15, 20, 25 and 30 fps.

Bit rate

Set the bit rate of MPEG image transmission for a line.

Selectable values are 64, 128, 256, 384, 512, 768, 1024,

1536 and 2048 kbps.

Image quality

Set the quality of JPEG image.

Note

Selectable values are from Level 1 to Level 5.

When Level 5 is selected, the best picture quality is

achieved.

The selected frame rate and bit rate are a tentative value.

The actual frame rate and bit rate may be different

according to the image size, the shooting scene or the

network condition.

Bandwidth control

When the video mode is set to JPEG, the network

bandwidth output from the camera can be limited.

Selectable bandwidths are 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0,

3.0, 4.0, and Unlimited Mbps. When you do not wish to

limit the bandwidth, select Unlimited.

I-picture interval

Set the I-picture inserting interval of MPEG4. I-picture

is the compression data serving the basic point when the

data compressed by MPEG4 is depressed. In the

condition that errors tends to happen, such as the

network environment variation, the distortion of the

image is reduced by selecting a small value. The

selectable values are 1, 2, 3, 4 and 5 seconds.

OK/Cancel

Auto rate control

This function adjusts the frame rate and the bit rate

automatically so that a smooth image is played to suit

the connected computer environment. If On is selected,

the rate of MPEG4 image is automatically adjusted.

Note

The maximum transmission rate will be the values set in

Frame rate and Bit rate.

Setting the Camera Image and Audio — Camera setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Reset Tab

Configuring the Network

— Network setting Menu

When you click Network on the Advanced mode menu,

the Network setting menu appears.

Use this menu to configure the network to connect the

camera and the computer.

The Network setting menu consists of four tabs,

Network, Wireless, PPPoE and Dynamic IP address

notification.

Network Tab

This section provides the menus for connecting the

camera through the network cable.

Reset camera menu

Click Reset, and “Camera menu setting is reset to

default. Are you sure?” is displayed. To reset to default,

click OK.

MAC address

Displays the MAC address of the camera.

Obtain an IP address automatically

(DHCP)

DHCP server is installed on the network. Select it when

the IP address is assigned by DHCP server. IP address is

assigned automatically.

Note

When you set Obtain an IP address automatically

(DHCP), make sure that DHCP server is working on the

network.

Use the following IP address

Select this when a fixed IP address is set.

IP address

Type the IP address of the camera.

Configuring the Network — Network setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Subnet mask

Type the subnet mask.

Wireless Tab — Setting of Wireless

Connection

Insert the specified wireless LAN card into the CF card

slot of the camera, and set the matters to connect to the

wireless network.

Default gateway

Type the default gateway.

Use Wireless card SNCA-CFW1 (optional) for the

wireless LAN card. For a wireless long-range sending

and receiving, use the wireless antenna SNCA-AN1

(optional) that can be connected to SNCA-CFW1.

Obtain DNS server address automatically

Select this to obtain the address of DNS server

automatically. It can be set only when Obtain an IP

address automatically (DHCP) is selected.

Note

When you select Obtain DNS server address

automatically, make sure that DHCP server is active on

the network.

Use the following DNS server address

Select this when you set the fixed address as the IP

address of DNS server.

Primary DNS server

Type the IP address of the primary DNS server.

Secondary DNS server

Type the IP address of the secondary DNS server, if

necessary.

MAC address

Displays MAC address of the wireless LAN card

inserted to the CF card slot.

If any wireless LAN card is not inserted,

“00:00:00:00:00:00” is displayed.

HTTP port number

Normally select 80. If you want to use a port number

other than 80, select the text box and type a port number

between 1024 and 65535.

Obtain an IP address automatically

(DHCP)

DHCP server is installed on the network. Select it when

the IP address is assigned by DHCP server. IP address is

assigned automatically.

Note

When you have set the HTTP port number to a number

other than 80 on the Network setting page or in the Setup

Program, access the camera by typing the IP address of

the camera on the web browser, as follows:

Note

Example: when HTTP port number is set to 8000

When you set Obtain an IP address automatically

(DHCP), make sure that DHCP server is working on the

network.

Use the following IP address

Select this when a fixed IP address is set.

OK/Cancel

IP address

Type the IP address of the camera.

Subnet mask

Type the subnet mask.

Configuring the Network — Network setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

in hexadecimal numbers (0 to 9 and A to F) or ASCII

characters (alphanumeric).

Default gateway

Type the default gateway.

When the Type menu is set to Infrastructure mode, the

WEP key should be the same as that of the access point.

When the Type menu is set to Ad hoc mode, the WEP

key should be the same as that of the communication

client.

Obtain DNS server address automatically

Select this to obtain the address of DNS server

automatically. It can be set only when Obtain an IP

address automatically (DHCP) is selected.

Antenna

Note

When you use dedicated wireless card SNCA-CFW1

(optional) or the wireless LAN antenna SNCA-AN1

(optional) that can be connected to SNCA-CFW1, you

can select one of the following antenna settings.

Internal: The built-in antenna within SNCA-CFW1 is

used for transmission. Suitable for a short-range

sending and receiving because it is non-directional.

External: Select it when you need a long-range sending

and receiving with connecting SNCA-AN1 to

SNCA-CFW1.

When you select Obtain DNS server address

automatically, make sure that DHCP server is active on

the network.

Use the following DNS server address

Select this when you set the fixed address as the IP

address of DNS server.

Primary DNS server

Type the IP address of the primary DNS server.

Diversity: Select it when you need both a short-range

and a long-range sending and receiving at the same

time while SNCA-AN1 is connected to SNCA-

CFW1.

Secondary DNS server

Type the IP address of the secondary DNS server.

The high sensitive antenna is selected.

Notes

SSID

• When you remove the wireless LAN card, be sure to

first turn off the power of the camera.

• When you use a wireless LAN card, the throughput of

communication data through the Ethernet may

decrease.

Type the service set ID to identify the wireless network

you want to access using up to 32 ASCII characters

(alphanumeric).

For your security, be sure to change the factory setting.

Type

Select the network connection type Ad hoc mode or

Infrastructure mode. Select Ad hoc mode when

connecting to the computer directly, or select

Infrastructure mode when connecting to the computer

via an access point or a radio router. When you select Ad

hoc mode, specify the wireless channel.

Note

The setting of the HTTP port number is common to the

setting of the network cable.

WEP

Select On when you use the WEP (Wired Equivalent

Privacy) keys, or Off when you do not use it.

The WEP key data settings are valid only when the

WEP menu is set to On.

WEP key/Retype WEP key

Specify up to 4 WEP keys. The length of a WEP key is

40 or 104 bit. A 104-bit WEP key has a higher security

level than a 40-bit key. You can type the WEP key either

Configuring the Network — Network setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Primary DNS server

Type the IP address of the primary DNS server.

PPPoE Tab - Setting of PPPoE

Connection

Use it when you connect the camera with PPPoE (Point-

to-Point Protocol over Ethernet). PPPoE connection is

the protocol that is widely used in xDSL (digital affiliate

line such as ADSL, VDSL or SDSL) as the

Secondary DNS server

Type the IP address of the secondary DNS server.

OK/Cancel

authentication and connection system.

Dynamic IP address notification

Tab — Notifying the IP Address

When the DHCP setting is set to On or PPPoE setting is

set to On on the Network tab, you can send notification

of the completion of the network settings using the

SMTP or HTTP protocol.

PPPoE

Set whether you connect the camera using PPPoE

function or not. When On is selected, PPPoE connection

is used.

IP address

When you connect to the network by PPPoE function, IP

address obtained at PPPoE connection is displayed.

User ID

e-Mail (SMTP) notification

Select On to send an e-Mail when the DHCP setting is

completed.

Type the user ID for the authentication necessary for

PPPoE connection. Type it up to 64 characters.

Password

SMTP server name

Type the name or IP address of the SMTP server you

want to use for sending an e-Mail, up to 64 characters.

Type the password for the authentication necessary for

PPPoE connection. Type it from 1 to 32 characters.

Re-type password

To certain the password, re-type the characters as them

typed in the password box.

Authentication

Select the authentication required when you send an e-

Mail.

Off: Select if no authentication is necessary when an e-

mail is sent.

On: When authentication is necessary an e-mail is sent,

select one of the authentication methods from the

followings.

Obtain DNS server address automatically

Select it to obtain the address of DNS server

automatically.

Use the following DNS server address

Select this when you set the fixed address as the IP

address of DNS server.

SMTP: Select if SMTP authentication is necessary

when an e-mail is sent.

Configuring the Network — Network setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

POP before SMTP: Select if POP before SMTP is

[port:] Specify the port number to which you want to

connect. If you want to use the well-known port

number 80, you do not need to input this value.

path: Type the command name.

necessary when an e-Mail is sent.

Note

parameter: Type the command parameter if necessary.

You can use the special tags mentioned below for the

parameters.

When you set to On, make sure to select either or both

SMTP or/and POP before SMTP.

POP server name

It is necessary when the POP before SMTP is selected

in Authentication.

Type the POP (receiving mail) server name up to 64

characters. Or type the IP address of the POP server.

This setting is necessary when the SMTP server which

sends e-mails performs authentication using the POP

user account.

Proxy server name

When you send HTTP commands via a proxy server,

type the name or IP address of the proxy server, up to 64

characters.

Proxy port number

Specify the port number when you send HTTP

commands via the proxy server. Set a port number

between 1024 and 65535.

User name, Password

Type the user name and Password of the user who has

the mail account. This setting is necessary when the

SMTP server which sends e-mails performs

authentication.

Method

Select the HTTP method GET or POST.

OK/Cancel

http://ip_address[:port]/path?parameter

Recipient e-mail address

Type the recipient e-Mail address up to 64 characters.

You can specify only one recipient e-Mail address.

About the special tags

Administrator e-mail address

Type the e-Mail address of the camera administrator, up

to 64 characters. This is used as the reply address or the

address for a system mail from the mail server.

You can use the following five special tags to allow the

notification of the settings acquired by the DHCP, such

as an IP address. Type the tags in the parameter section

of the URL that you describe in the Message field of the

HTTP.

Subject

Type the subject/title of the e-Mail up to 64 characters.

<IP>

Use this tag to embed the IP address acquired by the

DHCP in the text or parameter.

Message

Type the text of the e-Mail up to 384 characters. You can

describe the information of the acquired IP address, etc.

using the special tags mentioned below.

Use this tag to embed the specified HTTP server port

number in the text or parameters.

HTTP notification

Select On to output a command to the HTTP server

when the DHCP setting is completed. Using this

function, you can configure a useful system, for

example, to view the access log stored in the HTTP

server or start an external CGI program.

Use this tag to embed the MAC address of the interface

whose IP address you have acquired by the DHCP, in the

text or parameter.

Use this tag to embed the camera's model name (SNC-

P5) in the text or parameter.

URL

Specify the URL to send HTTP commands, up to 256

characters. The URL is normally composed as follows:

Use this tag to embed the camera's serial number in the

text or parameter.

ip_address: Type the IP address of the host or host name

to which you want to connect.

Configuring the Network — Network setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

View: You can monitor only the camera image.

Setting the User

Viewer authentication

Set whether the user is authenticated or not when the

main viewer is displayed.

When you select On, the main viewer is displayed to suit

the authenticated user. When you select Off, select the

view mode of the main viewer page which is displayed

without authentication from among Full, PanTilt, Light

or View.

— User setting Menu

When you click User on the Advanced mode menu, the

User setting menu appears.

Use this menu to set the user names and passwords of

Administrator and up to 9 kinds of users (User 1 to User

9), and the access right of each user.

OK/Cancel

Administrator, User 1 to 9

Specify User name, Password, Re-type password,

FTP user and Viewer mode for each user ID.

User name

Type a user name between 5 and 16 characters.

Password

Type a password between 5 and 16 characters.

Re-type password

To confirm the password, type the same characters as

you typed in the Password box.

FTP user

Set whether logging in to FTP server is allowed or not.

When you need to log in to FTP server, check it.

Viewer mode

If the user is authenticated when the main viewer is

displayed, you can select the viewer mode displayed

after authentication.

Full: You can operate all functions in this mode.

PanTilt: In addition to the light mode, you can operate

PanTilt.

Light: In addition to the view mode, you can select the

image size of the main viewer, control digital zoom,

and get a still image.

Setting the User — User setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Setting the Security

— Security setting Menu

You can access the camera even from a computer having

an IP address whose access right is set to Deny, if you

enter the user name and password set for the

Administrator boxes in the User setting menu.

When you click Security on the Advanced mode menu,

the Security setting menu appears.

Use this menu to limit the computers that can access the

camera.

OK/Cancel

Security function

To activate the security function, select On.

If you do not wish to use the security function, select

Off.

Default policy

Select the basic policy of the limit from Allow and Deny

for the computers specified on the Network address/

Subnet 1 to Network address/Subnet 10 menus below.

Network address/Subnet 1 to Network

address/Subnet 10

Type the IP addresses and subnet mask values you want

to allow or deny access to the camera.

You can specify up to 10 IP addresses and subnet mask

values. For a subnet mask, type 8 to 32.

Select Allow or Deny from the list box on the right for

each IP address/subnet mask .

Tip

The subnet mask value represents the bit number from

the left of the network address.

For example, the subnet mask value for “255.255.255.0”

is 24.

If you set “192.168.0.0/24” and “Allow,” you can allow

access from the computers having an IP address between

“192.168.0.0” and “192.168.0.255”.

Setting the Security — Security setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

SMTP server name

Type the SMTP server name up to 64 characters, or the

IP address of the SMTP server.

Sending an Image via

mail — e-Mail (SMTP) setting

Authentication

Select the authentication required when you send an e-

mail.

Off: Select if no authentication is necessary when an e-

mail is sent.

On: When authentication is necessary an e-mail is sent,

select one of the authentication methods from the

followings.

When you click e-Mail SMTP on the Advanced mode

menu, the SMTP setting menu appears.

By using Mail (SMTP) function, you can send a mail

with attached image which has been shot linked with the

external sensor input or with the built-in motion

detection function. The image file can also be sent

periodically.

e-Mail (SMTP) setting menu is composed of three tabs,

Common, Alarm sending and Periodical sending.

SMTP: Select if SMTP authentication is necessary

when an e-mail is sent.

POP before SMTP: Select if POP before SMTP

authentication is necessary when an e-mail is

sent.

Common Tab — Setting the SMTP

Function

Note

When you set to On, be sure to select either or both

SMTP or/and POP before SMTP.

POP server name

It is necessary when the POP before SMTP is selected

in Authentication.

Type the POP (receiving mail) server name up to 64

characters, or type the IP address of the POP server. This

setting is necessary when the SMTP server which sends

e-mails performs authentication using the POP user

account.

User name, Password

Type the user name and Password of the user who has

the mail account. This setting is necessary when the

SMTP server which sends e-mails performs

authentication.

e-Mail (SMTP)

Recipient e-mail address

Type the recipient e-Mail address up to 64 characters.

You can specify up to three recipient E-mail addresses.

Select On when you use the e-Mail (SMTP) function.

The common setting options are displayed below.

If you do not wish to use the e-Mail (SMTP) function,

select Off and click OK.

Administrator e-mail address

Type the Administrator e-Mail address up to 64

characters.

This address is used for reply mail and sending system

messages from the SMTP server.

Notes

• During transmission of an image file via mail, the

frame rate and operation performance of the monitor

image of the main viewer decline.

• While the camera video mode is set to MPEG4, the

image of the composite video signal output from the

video output connector of the camera may be distorted

during mail transmission.

• You cannot send an audio file by using the mail

sending function.

Subject

Type the subject/title of the e-Mail up to 64 characters.

With respect to mail which is sent according to the alarm

detection when Alarm sending of the alarm tab is set to

On, the characters standing for the sensor type added to

the subject. S1 is added for sensor input1 detection, S2

is added for sensor input2 detection, and MD is added

for motion detection.

Sending an Image via mail — e-Mail (SMTP) setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Date & time: The date & time suffix is added to the

Image file name.

Message

Type the text of the E-mail up to 384 characters. (A line

break is equivalent to 2 characters.)

The date/time suffix consists of lower two-digits of

year (2 digits), month (2 digits), date (2 digits), hour

(2 digits), minute (2 digits), second (2 digits), and

consecutive number (2 digits), thus 14-digit number

is added to the file name.

OK/Cancel

— Schedule setting Menu” on page 61)

Sequence number: A consecutive number of 10 digits

between 0000000001 and 4294967295 and two fixed

digits 00 is added to the Image file name.

Alarm sending Tab — Setting the

mail sending mode when detecting

the alarm

Set to send the mail with connection to the alarm

detection by the external sensor input or by the built-in

motion detection function.

Tip

A consecutive number added to Date & time and

Sequence number is used to identify each of multiple

files created with one alarm event.

Sequence number clear

Click Clear to reset the Sequence number suffix to 1.

Alarm

Select the connected alarm.

Sensor input1: The external sensor which is connected

to sensor input1 of the camera I/O port.

Sensor input2: The external sensor which is connected

to sensor input2 of the camera I/O port.

Motion detection: Click Motion detection button, and

the Motion detection setting menu is displayed. You

can set the motion detection function (page 62).

Notes

• Motion detection works only when the camera Video

mode is set to MPEG4 and the Cropping is set Off.

• In the case that the synchronized preset position is

specified, the alarm event that happens during moving

to the preset position will be invalid.

Alarm sending

Select On to set to send mail with connection to the

alarm detection.

Effective period

File attachment

Set whether an image file is attached to the mail sent or

not.

When On is selected, the image file made by the settings

below is attached. When Off is selected, only the

message is sent.

Set the period when the alarm detection is effective.

Always: The alarm detection is always effective.

Schedule: You can specify the period when the alarm

detection is effective in the schedule setting in the

other section.

Click Schedule and the setting menu for the

Effective period is displayed. (“Setting the Schedule

Image file name

Type the file name you want to assign to the image to

attach a mail. You can use up to 10 alphanumeric, -

(hyphen) and _ (underscore) for naming.

OK/Cancel

Suffix

Select a suffix to add to the file name.

None: No suffix is added. The Image file name is

assigned to the image to be sent via an e-Mail.

Sending an Image via mail — e-Mail (SMTP) setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Effective period

Periodical sending Tab — Setting

the periodical mail sending mode

You can set to send mails periodically.

Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the

periodical sending is effective in the schedule setting

in the other section.

Click Schedule and the setting menu for the effective

period is displayed. (“Setting the Schedule —

OK/Cancel

Periodical sending

Select On when you want to send mails periodically. If

you select Off, Periodical sending is not executed.

Image file name

Type the file name of the image attached to the mail up

to 10 alphanumeric, - (hyphen) and _ (under score).

Suffix

Select a suffix added to the file name used when the mail

is sent.

None: The name of the sent file will be the Image file

name.

Date & time: The date & time suffix is added to the

Image file name.

The date & time suffix consists of lower two-digits of

year (2 digits), month (2 digits), date (2 digits), hour

(2 digits), minute (2 digits) and second (2 digits), and

consecutive number (2 digits), thus 14-digit number

is added to the file name.

Sequence number: A consecutive number of 10 digits

between 0000000001 and 4294967295 and two fixed

digits 00 is added to the Image file name.

Sequence number clear

Click Clear and the suffix of the sequence number

returns to 1.

Interval

Type the interval at which you want to send a mail

periodically. You can set the hour (H) and minutes (M)

between 30 minutes and 24 hours (one day).

Sending an Image via mail — e-Mail (SMTP) setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

User name

Type the user name for the FTP server.

Sending Images to FTP

Server

— FTP client setting Menu

Password

Type the password for the FTP server.

When you click FTP client on the Advanced mode

menu, the FTP client setting menu appears.

Re-type password

To confirm the password, type the same characters as

you typed in the Password box.

Use this menu to set up for capturing and sending still

images to an FTP server. By using FTP client function,

you can send the image and audio file which has been

shot and recorded linked with the external sensor input

or with the built-in motion detection function to FTP

server. The image file can also be sent periodically.

FTP client setting menu is composed of three tabs,

Common, Alarm sending and Periodical sending.

Passive mode

Set whether you use the passive mode of FTP server or

not when connecting to FTP server. Select On to

connect to FTP server using the passive mode.

OK/Cancel

buffer setting Menu” on page 61.

Common Tab — Setting the FTP

Client Function

Alarm sending Tab — Setting the

FTP client action when detecting

the alarm

Set to forward the image and audio file to the specified

FTP server linked with the alarm detection by the

external sensor input or by the built-in motion detection

function.

FTP client function

To activate the FTP client function, select On. The FTP

client setting page appears.

When you do not wish to use the FTP client function,

select Off.

Note

The frame rate and operability on the main viewer may

decrease while a file is being transmitted by the FTP

client function.

Alarm sending

Select On to send the image and audio file to FTP server

linked with the alarm detection.

FTP server name

Type the FTP server name to upload still images up to 64

characters, or the IP address of the FTP server.

Remote path

Type the path to the destination up to 64 characters.

Sending Images to FTP Server — FTP client setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Image file name

Alarm buffer

Type the file name you want to assign to the images

when sending to the FTP server. You can use up to 10

alphanumeric characters, - (hyphen) and _ (underscore)

for naming.

Select Use alarm buffer when you forward the image/

audio of before and after the alarm detection (pre-alarm,

post-alarm).

If you do not select it, only the image of the moment of

the alarm detection is forwarded.

Suffix

Click Alarm buffer to display the Alarm buffer setting

menu.

For details, see “Setting the Alarm Buffer — Alarm

Select a suffix to add to the file name.

Date & time: The date & time suffix is added to the

Image file name.

The date/time suffix consists of lower two-digits of

year (2 digits), month (2 digits), date (2 digits), hour

(2 digits), minute (2 digits) and second (2 digits), and

consecutive number (2 digits), thus 14-digit number

is added to the file name.

OK/Cancel

— Schedule setting Menu” on page 61)

Sequence number: A consecutive number of 10 digits

between 0000000001 and 4294967295 and an

consecutive 2 digits number is added to the Image

file name.

Periodical sending Tab — Setting

the Periodical FTP Client Activity

You can set to send an image file to FTP server

periodically.

Tip

A consecutive number added to Date & time and

Sequence number is used to identify each of multiple

files created with one alarm event.

Sequence number clear

Click Clear to reset the Sequence number suffix to 1.

Alarm

Select the connected alarm.

Sensor input1: The external sensor which is connected

to sensor input1 of the camera I/O port.

Sensor input2: The external sensor which is connected

to sensor input2 of the camera I/O port.

Motion detection: Click Motion detection button, and

the Motion detection setting menu is displayed. You

can set the motion detection function (page 62).

Note

Periodical sending

Select On when you want to use periodical sending. If

you select Off, Periodical sending is not executed.

Motion detection works only when the Video mode is

set to MPEG4 and the Cropping is set to Off.

Effective period

Remote path

Type the remote path up to 64 characters.

Set the period when the alarm detection is effective.

Always: The alarm detection is always effective.

Schedule: You can specify the period when the alarm

detection is effective in the schedule setting in the

other section.

Image file name

Type the file name of the image sent to FTP server up to

10 alphanumeric characters, - (hyphen) and _ (under

score).

Click Schedule and the setting menu for the

Effective period is displayed. (“Setting the Schedule

Note

You cannot send the audio file by using the periodical

sending function of FTP.

Sending Images to FTP Server — FTP client setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Suffix

Select a suffix to be added to the file name sent to FTP

server.

None: The name of the sent file will be the Image file

name.

Date & time: The date & time suffix is added to the

Image file name.

Recording Images in

Memory

— Image memory setting Menu

When you click Image memory on the Advanced mode

menu, the Image memory setting menu appears.

By using the image memory function, you can record the

image and audio file, which has been shot being linked

with the external sensor input or with the built-in motion

detection function, to the built-in memory (about 8 MB)

of the camera or CF memory card. The image file can

also be recorded periodically.

The recorded image and audio files can be found or

downloaded to the computer using the FTP server

function. (See “Downloading Images from the Camera

— FTP server setting Menu” on page 57.)

The date & time suffix consists of lower two-digits of

year (2 digits), month (2 digits), date (2 digits), hour

(2 digits), minute (2 digits) and second (2 digits), and

consecutive number (2 digits), thus 14-digit number

is added to the file name.

Sequence number: A consecutive number of 10 digits

between 0000000001 and 4294967295 and two fixed

digits 00 is added to the Image file name.

Sequence number clear

Click Clear and the suffix of the sequence number

returns to 1.

Image memory setting menu is composed of three tabs,

Common, Alarm recording and Periodical recording.

Notes

Interval

• The image and audio files recorded in the built-in

memory will be erased when the power of the camera

is turned off.

• The frame rate and operability on the main viewer

may decrease during image storage in the memory.

• When you remove the CF memory card or you turn off

the camera with the CF memory card inside, set Image

memory function to OFF.

Type the interval at which you want to send images to

the FTP server periodically. You can set the hour (H),

minutes (M) and seconds (S) between 1 second and 24

hours (one day).

Note

The actual interval may be longer than the set value,

depending on the image size, image quality setting, bit

rate and the network environments.

• Format the CF memory card in the computer before

use.

Common Tab — Setting the Image

memory Function

Effective period

Set the period when the periodical sending is effective.

Always: The periodical sending is always effective.

Schedule: You can specify the period when the

periodical sending is effective in the schedule setting

in the other section.

Click Schedule and the setting menu for the effective

period is displayed. (“Setting the Schedule —

OK/Cancel

Image memory

Set whether you use the Image memory function or not.

When you select On, the Common setting options are

Recording Images in Memory — Image memory setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

displays in the below. If you do not use it, select Off and

click OK.

Note

When you set to On, be sure to select either or both

SMTP or/and POP before SMTP.

Built-in memory

It displays the free spaces of the built-in memory you

can write in at present.

POP server name

This is necessary when POP before SMTP is selected

in Authentication.

Type POP (receiving mail) server name up to 64

characters. Otherwise type the IP address of POP server.

This setting is necessary when SMTP server that sends a

mail authenticates using the account of POP user.

A-slot

It displays the free spaces of the CF memory card you

can write in at present.

Selected root directory

Select a memory in which you want to save an image.

Built-in memory: built-in memory of this camera

(approximately 8 MB)

A-slot: CF memory card inserted into the slot in the

front side of the camera

User name, password

Type the user name and the password of the user who

has the mail account. This setting is necessary when

SMTP server that sends a mail authenticates.

Administrator e-mail address

Type the E-mail address of the recipient of the warning

mail (E-mail address of the camera Administrator), up to

64 characters.

Overwrite

Select to overwrite the file or not when there is

insufficient memory space to record the image.

Select On to allow overwriting. The oldest file or folder

is overwritten first.

Select Off to prohibit overwriting. In this case, a new file

cannot be stored.

OK/Cancel

Capacity warning

Select On to send a warning mail to the Administrator

when the built-in memory space is low or the memory is

full. Select Off if you do not want to send a warning

mail.

Alarm recording Tab — Setting the

Image Memory Function when

Detecting the Alarm

You can set to record the image and audio file to the

memory linked with the external sensor input or with the

built-in motion detection function.

Note

When the Overwrite is set to On, a warning mail is not

sent to the Administrator.

SMTP server name

Type the name of the SMTP server you want to use for

sending the warning mail, up to 64 characters.

Otherwise type the IP address of SMTP mail server.

Authentication

Select the authentication required when you send an

alarm mail.

Off: Select if no authentication is necessary when an e-

mail is sent.

On: When authentication is necessary an e-mail is sent,

select one of the authentication methods from the

followings.

SMTP: Select if SMTP authentication is necessary

when an e-mail is sent.

POP before SMTP: Select if POP before SMTP

authentication is necessary when an e-mail is

sent.

Recording Images in Memory — Image memory setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Schedule: You can specify the period when the alarm

detection is effective in the schedule setting in the

other section.

Alarm recording

Select On to set to record the image and audio file to the

memory linked with the external sensor input or with the

built-in motion detection function.

Click Schedule and the setting menu for the effective

period is displayed. (“Setting the Schedule —

buffer setting Menu” on page 61.

Image file name

Type the file name you want to assign to the images

when saving in the built-in memory. You can use up to

10 alphanumeric characters, - (hyphen) and _

(underscore) for naming.

Alarm buffer

Select Use alarm buffer when you forward the image/

audio of before and after the alarm detection (pre-alarm,

post-alarm).

If you do not select it, only the image of the moment of

the alarm detection is forwarded.

Suffix

Select a suffix to add to the file name.

Date & time: The Date & time suffix is added to the

Image file name.

Click Alarm buffer to display the Alarm buffer setting

menu.

The Date & time suffix consists of lower two-digits

of year (2 digits), month (2 digits), date (2 digits),

hour (2 digits), minute (2 digits), second (2 digits)

and consecutive number (2 digits), thus 14-digit

number is added to the file name.

For details, see “Setting the Alarm Buffer — Alarm

OK/Cancel

Sequence number: A consecutive number of 10 digits

between 0000000001 and 4294967295 and an

consecutive 2 digits number is added to the Image

file name.

Periodical recording Tab — Setting

the Periodical recording mode

Tip

You can set to record the image file to the memory

periodically.

A consecutive number added to Date & time and

Sequence number is used to identify each of multiple

files created with one alarm event.

Sequence number clear

Click Clear to reset the Sequence number suffix to 1.

Alarm

Select the connected alarm.

Sensor input1: The external sensor which is connected

to sensor input1 of the camera I/O port.

Sensor input2: The external sensor which is connected

to sensor input2 of the camera I/O port.

Motion detection: Click Motion detection button, and

the Motion detection setting page is displayed. You

can set the motion detection function (page 62).

Notes

• Motion detection works only when the Video mode is

set to MPEG4 and the Cropping is set to Off.

• In the case that the synchronized preset position is

specified, the alarm event that happens during moving

to the preset position will be invalid.

Periodical recording

Select On when you want to use periodical recording. If

you select Off, the Periodical recording is not executed.

Image file name

Type the file name of the image recorded to the memory

up to 10 alphanumeric, - (hyphen) and _ (underscore).

Effective period

Set the period when the alarm detection is effective.

Always: The alarm detection is always effective.

Recording Images in Memory — Image memory setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Directory Structure of Image

Memory

The images are recorded in the memory with the

following directory structure.

Note

You cannot send the audio file by using the periodical

recording function.

Suffix

Select a suffix to add to the file name.

None: The recording file name will be the Image file

name.

Date & time: The date & time suffix is added to the

Image file name.

FTP root

Date_No.

xxxxxxx.m4f

yyyyyyy.m4f

aaaaaaa.jpg

bbbbbbb.jpf

ccccccc.mf4

The date/time suffix consists of lower two-digits of

year (2 digits), month (2 digits), date (2 digits), hour

(2 digits), minute (2 digits), second (2 digits), and

consecutive number (2 digits), thus 14-digit number

is added to the file name.

zzzzzzz.mf4

qqqqqqq.mf4

Sequence number: A consecutive number of 10 digits

between 0000000001 and 4294967295 and two fixed

digits 00 is added to the Image file name.

represents a directory created automatically.

The Date_No. directory has a 11-digit name consisting

of the last two digits of year (2 digits), month (2 digits),

day (2 digits) underscore and sequence number (2

digits).

A directory can contain video files of up to

approximately 1 MB when you use the built-in memory.

A new directory will be created automatically if the size

of the video files in the current directory exceeds the

maximum size, and recording will continue.

Sequence number clear

Click Clear and the suffix of the sequence number

returns to 1.

Interval

Type the interval at which you want to record an image

in the memory periodically. You can set the hour (H),

minutes (M) and seconds (S) between 1 second and 24

hours (one day).

Note

When you use CF memory card, the directory size varies

by the card capacity.

Note

The actual interval may be longer than the set value,

depending on the image size or the network

environments.

About the extension of a file

A file to be recorded/sent using the image memory

function or the FTP client function has one of the

following three extensions depending on the video mode

setting and the recording/sending settings of the camera.

Efective period

Set the period when the periodical recording is effective.

Always: The periodical recording is always effective.

Schedule: You can specify the period when the

periodical recording is effective in the schedule

setting in the other section.

.m4f: Represents the MPEG4 video mode.

.jpf: Represents the JPEG video mode when Use alarm

buffer is checked in the alarm recording/alarm

sending menu. This file includes audio data.

.jpg: Represents the JPEG video mode when Use

alarm buffer is not checked in the alarm recording/

alarm sending menu. This file can be viewed with a

normal image viewer.

Click Schedule and the setting menu for the effective

period is displayed. (“Setting the Schedule — Schedule

setting Menu” on page 61)

The SNC video player (page 69) allows playing of

“.m4f” and “.jpf” files.

OK/Cancel

Recording Images in Memory — Image memory setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

OK/Cancel

Downloading Images

from the Camera — FTP

server setting Menu

When you click FTP server on the Administrator menu,

the FTP server setting menu appears. Use this menu to

set up for the FTP server function which finds a

specified image and audio file stored in the built-in

memory of the camera (about 8 MB) or CF memory

card, or download the still image file from the camera

using the FTP client software of the computer.

Note

Note the followings when you log in the FTP server of

the camera using the FTP client software of the

computer.

• The frame rate and the operativity of the monitor

window in the main viewer will degrade.

• While recording the image using the Image memory

function, you cannot delete the recording directory.

• When the recorded image or audio file is deleted, the

camera counts the free space of the memory again at

logging off.

FTP server function

To activate the FTP server function, select On and click

OK.

When you do not use the FTP server function, select Off

and click OK.

Built-in memory

It displays the free spaces of the built-in memory you

can write in at present.

A-slot

It displays the free spaces of the CF memory card you

can write in at present.

Selected root directory

Select the memory, which contains the file you want to

download.

Built-in memory: built-in memory of this camera

(approximately 8 MB)

A-slot: CF memory card inserted into the slot in the

front side of the camera

Downloading Images from the Camera — FTP server setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Motion detection: To set the motion detection function,

click Motion detection. The Motion detection

setting page appears (see page 62).

Setting the Alarm Output

— Alarm output setting Menu

Notes

• The motion detection function can activate or be set

only when the Video mode of the camera is set to

MPEG4 and the Cropping is set Off.

• In the case that the synchronized preset position is

specified, the alarm event that happens during moving

to the preset position will be invalid.

When you click Alarm output on the Advanced mode

menu, the Alarm output setting menu appears.

You can set in this menu to control the alarm out of I/O

port on the rear of the camera linked to the alarm

detection and the timer.

Alarm output Tab

Alarm duration

Select the duration for which the alarm output is short-

circuited between 1 and 60 sec.

Effective period

This item is displayed when Mode is set to Alarm.

Set the period while the alarm detection is effective.

Always: The alarm detection is always effective.

Schedule: You can specify the period when the alarm

detection is effective in the schedule setting in the

other section.

Click Schedule and the setting menu for the effective

period is displayed. (“Setting the Schedule —

Schedule

This item is displayed when Mode is set to Timer.

Click Schedule and the setting menu for the effective

period is displayed. (“Setting the Schedule — Schedule

setting Menu” on page 61)

Alarm output

To activate the Alarm output function, select On. The

basic setting options are displayed below.

When you do not use the Alarm output function, select

Off.

Mode

Select the mode of the Alarm output function.

Alarm: Controls alarm output by synchronizing with an

external sensor input or the built-in activity detection

function.

Timer: Controls alarm output by the timer.

Alarm

This item is displayed when Mode is set to Alarm.

Select the alarm to link the alarm output function. If the

selected alarm is detected, the alarm output status

changes.

Sensor input1: The external sensor which is connected

to sensor input1 of the camera I/O port.

Sensor input2: The external sensor which is connected

to sensor input2 of the camera I/O port.

OK/Cancel

Setting the Alarm Output — Alarm output setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Operations

from the Viewer Page —

Trigger setting Menu

Click Trigger on the Advanced mode menu to display

the Trigger Setting menu.

You can set the activities of when you click

icon of the main viewer in this menu.

Trigger

FTP client

After checking this, you will be able to select FTP client

in the Trigger setting menu. You can send an image file

to FTP server by selecting FTP and clicking the Trigger

icon.

When you click FTP client button, the Trigger (setting)

FTP client menu is displayed. You can set necessary

options here. The setting options and setting procedures

are the same as those of the FTP client setting menu

(page 51).

e-Mail (SMTP)

After checking it, you will be able to select e-Mail in the

Trigger setting menu. You can send mail with attached

image file by selecting e-Mail and clicking the Trigger

icon.

When you click e-Mail (SMTP) button, the Trigger (e-

Mail) setting menu is displayed. You can set necessary

options here. The setting options and setting procedures

are the same as those of the e-Mail (SMTP) setting menu

(page 48).

Note

While the Video mode is set to MPEG4, the image of

the composite video signal output from the video output

connector of the camera may be distorted during mail

transmission.

Image memory

After checking this, you will be able to select Image

memory in the Trigger setting menu. You can record an

image file to the built-in memory or the CF memory card

by selecting Image memory and clicking the Trigger

icon.

When you click Image memory button, the Trigger

(setting) Image memory menu is displayed. You can set

necessary options here. The setting options and setting

Setting the Operations from the Viewer Page — Trigger setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

procedures are the same as those of the Image Memory

setting menu (page 53).

Alarm output

Stay time

Set the stop time in each preset position (1 to 3600

seconds).

After checking this, you will be able to select Alarm

output in the Trigger setting menu. You can control On

(short circuit ) or Off (open) by selecting Alarm output

and clicking the Trigger icon.

Speed

Select the moving speed from the list box.

The value is higher, the moving speed is faster.

One Time Tour

After checking this, you will be able to select One time

tour in the Trigger list box.

Select One time tour in the trigger box and click the

trigger icon, then One time tour starts.

Up to 8 positions can be programmed, and the camera

moves to the programmed positions sequentially. The

camera stops when it moves to the last preset position.

Sequence

Select and set the preset number 1 to 8 for each of 8 list

boxes.

The camera moves to the preset position saved in the

selected preset number sequentially. The sequence of

camera movement starts from the preset position

specified in the list boxes from left to the right. The

camera stops when it moves to the right most.

If you select End in the list box, the program ends before

it and the camera stops.

When you click One time tour, One time tour setting

menu is displayed.

Preset position table

The programmed preset position names are displayed.

OK/Cancel

Setting the Operations from the Viewer Page — Trigger setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Schedule

— Schedule setting Menu

Setting the Alarm Buffer

— Alarm buffer setting Menu

When you click Schedule on the Advanced mode menu,

the Schedule setting menu appears.

When you click Alarm buffer on the Advanced mode

menu, the Alarm buffer Setting menu appears.

You can set the Pre-alarm image and audio (the image

and audio before the alarm detection) and the Post -

alarm image and audio. These can be set when Alarm

sending or Alarm recording of FTP client setting menu

or Image memory setting menu is set to On, and besides

when Use alarm buffer is selected.

This is the same menu as the setting menu which is

displayed when you click Schedule to set Effective

period and Schedule in FTP client setting menu, e-Mail

(SMTP) setting menu, Image memory setting menu,

Alarm out setting menu and so on.

Example: When setting e-Mail (SMTP) (the alarm

sending) in the Schedule setting menu

Video mode

The Video mode set in the Common tab of the Camera

setting menu is displayed.

MPEG4: Shows the present output format of the camera

is MPEG4.

JPEG: Shows the present output format of the camera is

JPEG.

Schedule selection

Select the list box to specify the schedule you want to

set. e-Mail (SMTP) – Alarm, e-Mail (SMTP) –

Periodical, FTP – Alarm, FTP – Periodical, Image

memory – Alarm, Image memory – Periodical,

Alarm output – Alarm or Alarm output – Timer, can

be selected.

Recording capacity

Displays the maximum recording capacity of alarm

buffer in the present camera setting of the video mode,

image size, bit rate and frame rate.

Mon (Monday) to Sun (Sunday)

The time period on the right of the checked day is the

effective period of the schedule.

Pre-alarm period: Displays the maximum recording

capacity of image/audio before the alarm detection.

Post-alarm period: Displays the maximum recording

capacity of image/audio after the alarm detection.

Start time, End time

Specify the Start time and the End time.

Use the same time schedule every day

When this is checked, the Start time and End time set

to Mon (Monday) are applied to all days. In this case,

the Start time and End time of the other days than Mon

(Monday) cannot be input.

Recording time

Set the recording time for the Pre-alarm image/audio

and Post alarm image/audio.

Pre alarm period: Type the recording time of the

image/audio before the alarm detection.

Post alarm period: Type the recording time of the

image/audio after the alarm detection.

OK/Cancel

Setting the Schedule — Schedule setting Menu / Setting the Alarm Buffer — Alarm buffer setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Setting the Motion

Detection Function —

Motion detection setting Menu

When you click Motion detection on the Advanced

mode menu, the Motion detection setting menu appears.

You can set the conditions to activate the built-in motion

detection function in this menu.

The value of Recording capacity differs depending on

Image size, Bit rate (for MPEG4) and Image quality (for

JPEG) in the camera setting menu.

OK/Cancel

This is the same menu with the setting menu which is

displayed when you click Motion detection in Alarm

sending of e-Mail (SMTP) setting menu, Alarm sending

or FTP client setting menu, Alarm recording of Image

memory setting menu and so on.

Note

The motion detection function can activate or be set only

when the Video mode of the camera is set to MPEG4

and the Cropping is set Off.

The Motion detection setting menu is composed of the

following five parts.

Monitor display

You can monitor the moving image and sets the

detection Window.

Window 1 to 4 check box

When you check it, the specified Window is displayed

on the monitor display.

Threshold slider bar

Set the Threshold level so as to judge whether there has

been any motion in the camera image or not. You can

change the Threshold level displayed in the Motion

detection indicator.

Setting the Motion Detection Function — Motion detection setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

• The Motion detection may not operate correctly in the

following cases:

– while changing a setting on the Camera setting

Motion detection indicator

The moving level of the present shooting image inside

the specified Window is shown in the graph. The even

line shows the threshold level for Motion detection

which will be a guide to set the sensitivity properly.

– when the object is dark

– when the camera is installed in an unstable place

that causes vibration to the camera

– when a small bit rate (64 kbps, 128kbps) is selected

in Bit rate setting of MPEG4

Sensitivity slider bar

Use it to set the sensitivity of the monitoring image.

When the slider bar is moved to the left end, the

sensitivity will be 0 and any motion will not be detected.

The right end is the maximum sensitivity.

Setting the Motion Detection Area,

Sensitivity and Threshold level

Set the motion detection working area, the sensitivity

and the threshold level as follows:

Check Window 1 check box.

Window 1 is shown on the monitor display.

Settle Window 1 in the area you want to set Motion

detection.

Click and drag Window 1 to move it or change the

size of it.

Set the Sensitivity of Motion detection.

Adjust it referring to the level indicator of Motion

detection.

To increase the sensitivity, move the Sensitivity

slider bar to the right.

To decrease, move it to the left.

When you release the mouse, the new setting is

applied to the level of motion detection indicator.

Set the Threshold level of Motion detection.

Adjust the Threshold slider bar in the same way of

step 3 to set the level the camera executes motion

detection.

If necessary, set the Motion detection working

areas, the sensitivities and the Threshold level of

the other Windows 2, 3, 4 by following steps 1 to 4.

After all settings, click OK.

Notes

• While motion detection setting menu is displayed,

motion detection of e-Mail (SMTP), FTP client,

Image memory and Alarm output notification will not

work. Make sure to close Motion detection setting

menu after setting.

• Before using the Motion detection, perform the

operation test to confirm correct operation.

Setting the Motion Detection Function — Motion detection setting Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

If an alarm is detected by the sensor input or the activity

detection function, the camera automatically moves to

the corresponding preset position.

Saving the Camera

Position — Preset position

setting Menu

When you click Preset Position of the Advanced mode

menu, the preset position setting menu is displayed. In

this menu, PanTilt and Zoom position can be saved up to

8 items, and the home position the camera faces to can

be saved when the power is turned on.

Sensor input1: Select a preset position to synchronize

with the alarm from Sensor input 1.

Sensor input2: Select a preset position to synchronize

with the alarm from Sensor input 2.

Motion detection: Select a preset position to

synchronize with the alarm from the motion

detection.

In the case not to synchronize with any preset number,

select None.

Note

In the case that the synchronized preset position is

specified, the alarm event that happens during moving to

the preset position will be invalid.

Home position

Set the position the camera faces to when the power is

turned on.

Home position number

Select the preset number from 1 to 8.

When the power is turned on, the camera moves to the

preset position programmed to the selected preset

number.

Preset

Resume time on inactivity

The user operates PanTilt or Zoom, or selects whether

the camera returns to the home position after the preset

activity by the alarm.

On: You can specify in the text box the wait time before

the camera moves to the home position , from 5 to

600 seconds.

Preset No.

Select a preset number from 1 to 8 in the list box.

Recall: When you click Recall, the camera moves to the

position of the selected preset number at present.

Set: Use it to save the camera position to a preset

number.

After the PanTilt operation or so of the user, the

camera returns to the home position automatically

after the specified time has elapsed.

Carry out the following steps.

1 Move the camera to the position to be saved while

you are checking the image with the main viewer.

Off: When the user has operated PanTilt or so, the

camera stays in the stop position and it does not

return to the home position.

2 Select a preset number for saving, and write the

preset position name.

Tip

3 Click the SET.

The camera position is saved.

Reset: When you press Reset, deletes the saved contents

of the current selected preset number.

When you click

camera moves to the preset position set in the home

position number.

button on the control panel, the

Preset position name

Preset position table

Write the preset position name of the selected preset

number.

The programmed preset position names are displayed.

OK/Cancel