™
DuraSpin Cordless Screw Driver
Model DS200-14v
Applications:
For drywallers and remodelers, DuraSpin is the ideal tool for drywall
(to wood or steel studs), floor sheathing, and underlayment.
Features and Benefits:
• 14.4 volt battery provides the optimum balance of power,
weight and run-time across the full range of screws
• 2,300 RPM high-torque motor drives screws without
bogging down
• Patented clutch design means long-lasting durability
• One-hour charger and extra battery ensures a backup battery
with a full charge
NEW!
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Easy bit change — from phillips to square
• Wide range of collated screws to speed production
• Belt hook — DuraSpin goes where you go
• One full year warranty
DuraSpin, the collated screw fastening system from SENCO®,
is designed to maximize efficiency in a wide variety of screw-
fastening applications. Engineered for comfort and convenience,
the DS200-14v cordless screw driver drives 1" to 2" screws.
Fastener Specifications:
Screw Lengths: 1" (25 mm) to 2" (50 mm)
Screw Diameters: #6, #7, #8
Drywall
to Wood
Drywall to
Light Gauge Steel Heavy Gauge Steel
Drywall to
Wood
to Wood
Application:
Drive/Head:
#2 Phillips
#2 Phillips
#2 Phillips
#2 Square
Bugle
Bugle
Fine
Bugle
Fine
Flat
Coarse 2/3
with Wax
Thread:
Point:
Coarse
Sharp
Sharp
Drill
Sharp
Tool Specifications:
Voltage: 14.4 volts
Battery Ampacity: 1700 mAh
RPM: 2300 rev/min
Grey
Phosphate
Grey
Phosphate
Clear
Zinc
Yellow
Zinc
Finish:
Screw:
Weight: 4.9 lbs. (2.2 kg)
Height: 10 inches (254 mm)
Length: 13.8 inches (350 mm)
Width: 2.8 inches (70 mm)
Recharge Time: 1 hour
#6 X 11/4
"
#6 X 11/4
"
#6 X 11/4
"
Screw Drives/Charge: see chart on reverse side
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 37 in-lbs
Generated Noise: 74 dBA
#8 X 11/2
"
#6 X 15/8
"
#8 X 13/
4
"
Vibration: less than 2.5m/sec2
#7 X 2"
Download from Www.Somanuals.com. All Manuals Search And Download.
|