Sanyo Projector PLC XW250 User Guide

2600/2200 ANSI LUMENS z TRUE XGA z MULTIMEDIA PROJECTOR  
S p e c i f i c a t i o n s  
PLC-XW250/200  
Resolution  
Brightness (typical)  
Uniformity  
XGA  
XGA Ultraportable Multimedia Projector  
2600(XW250) / 2200( XW200) ANSI lumens  
85%  
Panel System  
Number of Pixels  
Contrast Ratio (Full on /  
off)  
0.55" TFT Poly x3  
2,359,296  
500:1  
Image Size  
40" - 300"  
Aspect Ratio  
4:3  
Projection Lamp (s)  
220W UHP  
H sync : 15 ~ 100 kHz ,  
V sync : 50 ~ 100 Hz  
Scanning Frequency  
Dot Clock  
140MHz  
Fan Noise  
29 dBA (Eco)  
Voltage  
BTU Rating  
Power Consumption  
100V~240V  
723( Eco)  
212W (Eco)  
ULTRA-COMPACT, FULLY PORTABLE XGA DESIGN  
Not much larger than a laptop PC, the PLC-XW250/200 weighs less than  
5.7 pounds and delivers true XGA picture quality in a versatile, go-  
anywhere system. Also the PLC- XW250/200 may be ceiling or inverse  
mounted for enhanced versatility.  
UXGA* / WXGA* / SXGA+* / SXGA* / XGA / SVGA /  
VGA / MAC, 480i, 480p, 575i, 575p, 720p, 1035i and  
Input signal compatibility  
1 080i *compression)  
Color System  
Projection Lens (inch)  
Throw Ratio  
Throw Distance (feet)  
Zoom / Focus  
Zoom Ratio  
Up / Down Ratio  
Digital Keystone  
Correction  
Digital Zoom  
Speaker Output  
Weight (lbs.)  
PAL / SECAM / NTSC / NTSC4.43 / PAL-M/ N  
COMPLETE EASY AUTO SET UP FUNCTION, SMART AUTO INPUT  
SEARCH AND AUTO VERTICAL KEYSTONE CORRECTION  
PLC- XW250/200 provides "Auto Set Up Function" that corrects keystone  
shaped distortion by searching for an input signal and detecting projector  
incline, therefore reducing set up time. PLC- XW250/200 automatically  
compensates for keystone picture distortion. Auto Keystone Correction,  
Auto Input Search and Auto PC Adjustment make it a really smart  
projector.  
F 2.00 - 2.15 f 0.72" - 0.87"  
1.62 - 1.92  
4.3' - 38.7'  
manual  
1:1.2  
6:1  
Auto ±30 deg (Vertical)  
Wired LAN (RJ-45) for projector control  
16x - 1/4x  
1W  
5.5 lbs  
This model is equipped with Wired LAN (RJ-45) that allows you to manage  
and control the projector via Network. It is possible to check the operating  
time of lamp and manage the warning notification by email. Power ON/OFF  
and switching of the input signal can be controlled. You can save a lot of  
time in manage and control.  
Dimensions (inch) W,H,D  
Replacement Lamp  
Replacement Remote  
13.1" x 3.4" x 9.7"  
610 345 2456  
645 099 3213  
D-sub15 x 1 : Analog RGB Input  
Environment friendly power consumption in standby mode: 0.4w  
The power consumption is reduced in standby mode to 0.4w. Caring for the  
environment is required due to global warming and CO2 reduction. The  
standby power consumption is reduced by 84% compared to the previous  
model.  
Computer Terminal  
(Component and S-video input with conversion cable)  
D-sub15 x 1 : Analog RGB Input or Monitor out  
RCA x 1 : Composite video  
Video Terminal  
Audio  
Mini-Jack (stereo) x 1 : Input (for Computer & Video)  
Mini-Jack (stereo) x 1 : Output (variable audio out)  
RJ-45 (LAN) D-sub 9pin (RS 232 C)  
Quick reference guide, Owner's manual (CD-ROM),  
CD-ROM read me note, CD-ROM (PJ-Net Manager  
application software), PIN code Label, Lamp  
replacement label, UL cable card, Warranty card,  
Power cord, Remote control, AAA Battery x 2, Lens  
cap, Strap for lens cap , VGA cable  
POA-CACOMPVGA, POA-CAVGAS, POA-CASCART  
Communication Terminal  
DUAL D-SUB15 INPUTS  
The PLC-XW250/200 offers excellent flexibility via a pair of D-Sub 15  
input terminals. Using an optional adapter cable, it can even accept  
component video signals. One of the D-Sub 15 terminals can even be  
switched between input and monitor output for greater programming  
flexibility.  
Included Accessories  
BLACK BOARD / COLOR BOARD MODE  
Optional Accessories  
User Maintenance  
What could be more right for education? A black board mode. The PLC-  
XW250/200 are compatible with four variously colored (red, blue, green,  
and yellow) projection surfaces via Color Board Mode.  
without a screen.  
Clean air filters, replace lamp assembly  
Three years parts and labor; 90 days original lamp;  
Quick Repair Program under warranty  
Warranty  
Because its products are subject to continuous improvement, SANYO reserves the right to  
modify product design and specifications without notice and without incurring any obligations.  
Rear Back Panel  
Issued 5/09  
©2009 SANYO  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QUAD Speaker System Classic Series ESL User Guide
Radio Shack Electronic Keyboard 42 4062 User Guide
RCA Stereo System AH46N User Guide
Ricoh Scanner Wide Format Color Scanner User Guide
RIDGID Sander EB44241 User Guide
Roberts Radio Portable Radio R9958 User Guide
Roberts Radio Radio RD 45 User Guide
Roland Music Pedal DSD 2 User Guide
Samsung Laptop Q71 User Guide
Sansui Flat Panel Television HDLCD 3700 User Guide