INSTRUCTION MANUAL
DWM-2500
DVD Home Theater System
TM
SANYO'S HELP-LINE
Call the toll-free number below if you have any difficulties operating this product.
1-800-813-3435 (Weekdays: 7:30 AM - 4:00 PM Central Time)
English
1AD6P1P1839-- DWM-2500, Issue Number 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Thissymbolindicatesthatdangerousvoltage
constitutingariskofelectricshockispresent
within this unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: UNAUTHORIZED RECORDING OF COPY-
RIGHTED MATERIAL MAY VIOLATE APPLICABLE
COPYRIGHT LAWS. THE MANUFACTURER ASSUMES
NO RESPONSIBILITY FOR UNAUTHORIZED DUPLICA-
TION, USE OR OTHER ACTS WHICH INFRINGE UPON
THE RIGHTS OF COPYRIGHT OWNERS.
WARNING:TOPREVENTFIREORSHOCKHAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
ACCESSORIES
FRONT
R
FRONT
R
Front right speaker cable
Length: Approx. 16.4 feet (5 meters)
RB-TS760MT wireless remote control
F
R
O
N
T
L
T
N
O
R
L
F
Front left speaker cable
REMOTE CONTROL RB-TS760MT
Length: Approx. 16.4 feet (5 meters)
C
E
N
T
R
E
T
E
N
E
R
C
Front center speaker cable
Length: Approx. 16.4 feet (5 meters)
AM loop antenna
R
E
A
R
R
R
A
R
E
R
Surround right speaker cable
Length: Approx. 23 feet (7 meters)
FM indoor antenna lead wire
Video cable
R
E
L
A
R
A
E
R
L
R
Surround left speaker cable
Length: Approx. 23 feet (7 meters)
SUBW
OOFER
OOFER
SUBW
Subwoofer speaker cable
Length: Approx. 16.4 feet (5 meters)
Note:
The speaker cables are packed in the speaker package.
Download from Www.Somanuals.c-oEm2. -All Manuals Search And Download.
SAFETY CERTIFICATION
Note:
This unit is made and tested to meet exacting safety
standards. It meets UL and FCC requirements and com-
plieswithsafetyperformancestandardsoftheU.S.Depart-
ment of Health and Human Services.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
CAUTION - USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSESPECIFIEDHEREINMAYRESULTINHAZARD-
OUS RADIATION EXPOSURE.
THISUNITSHOULDNOTBEADJUSTEDORREPAIRED
BY ANYONE EXCEPT PROPERLY QUALIFIED SER-
VICE PERSONNEL.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
•
CAUTION:
Changes or modifications not expressly approved by Sanyo may
void the user's authority to operate this equipment.
FOR SAFE AND EFFICIENT OPERATION
•
•
Do not damage the power cord.
•
When carrying the unit, be sure to remove a disc which
When not in use, disconnect the power cord from the outlet.
Grasp the plug, not the cord, when disconnecting the unit.
If water should enter the unit, electrical shock or a malfunction
may result. Use in an area where there is low humidity and
little dust.
Do not disassemble or alter the unit in any way.
Do not use the unit in areas where extremes in temperature
occur (below 40°F (5°C) or exceeding 95°F (35°C)), or where
it may be exposed to direct sunlight.
Because of the DVD video player extremely low noise and
wide dynamic range, there is a tendency to set the volume on
the amplifier higher than necessary. Doing so may produce
an excessively high output from the amplifier which can
cause damage to your speakers. Please be careful in this
regard.
may be inside and turn the power off. Then unplug the
power cord from the AC outlet after 10 seconds. Carrying
the unit with a disc inside may damage the disc and/or
the unit.
The unit is automatically set to the Screen Saver mode after
approximately 15 minutes have elapsed under the stop or
pause mode.
•
•
•
•
CAUTION:
•
The unit must be placed in a well ventilated area.
Do not place any object on the top of the unit.
Do not block ventilation holes.
The cabinet of the unit warms up when it is used for a long time,
but it is not a malfunction.
•
Sudden changes in the surrounding temperature can cause
dew to form on the optical pickup lens inside the unit. Under
this condition the unit may be unable to operate properly. If
this should occur, remove the disc and allow the unit to adjust
to the surrounding temperature.
Press [q] on the unit (or [OPEN/CLOSE] on the remote control)
when closing the disc tray. Do not push the disc tray.
Download from Www.Somanuals.c-oEm3. -All Manuals Search And Download.
CONTROLS
1
2
3
4
5
6
7
8
11
10
9
1. Disc tray
6. Stop button (n)
2. Open/Close button (q)
3. Function button (FUNCTION)
4. Preset tuning, Skip/Next/Previous buttons
(f- PRESET + e)
7. Play button (a)
8. Power button (z/ON)
9. Headphone jack (PHONES)
10. Volume control (VOLUME)
11. Remote sensor (IR)
5. FL display
FL display
3 5 7
1 2 4 6 8
9
10
D
L.M. MP3
WMA
SLEEP
T
17
16
PL
PGM ALL REP.1A
-
B
MONO
ST
C
RND
15 14 13
12 11
1. Dolby Digital indicator (sD)
2. *DTS indicator (DTS)
3. Play indicator (a)
4. Last memory indicator (L.M.)
5. Pause indicator (k)
10. Sleep timer indicator (SLEEP)
11. FM mono indicator (MONO)
12. FM stereo indicator (ST)
13. Chapter indicator (C)
14. Random play indicator (RND)
6. PM3 indicator (MP3)
7. WMA indicator (WMA)
8. Title and Track indicator (T)
15. Repeat mode indicators (ALL, REP., 1, A-B)
16. Program indicator (PGM)
17. Dolby Pro Logic indicator (sPL)
9. Message or number indicators
(Title, chapter, track, playing time or other information)
*
DVD video disc with DTS may not work correctly. You
can see the picture on the TV screen, but there is no
sound. For more details, please refer to “Selecting Audio
Soundtrack Language” on page E24.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
Download from Www.Somanuals.c-oEm4. -All Manuals Search And Download.
MULTI-BRAND TV REMOTE CONTROL
7
9
1
8
30
2
3
10
6
5
4
11
29
28
27
12
14
13
15
26
25
16
24
22
21
17
19
23
18
20
1. Power button (z/ON)
7. Open/Close button (OPEN/CLOSE)
8. Return button (RETURN) (See page E29.)
9. Clear/Trim button (CLEAR, TRIM)
Note:
2. Number and other function buttons
These buttons are used as number buttons and as function
buttons of each name.
•
When using as a number button, press the appropriate
button directly.
At Trimming mode, press the button while holding the SHIFT
button down. (See page E14.)
•
When using as a function button of each name, press the
appropriate button while holding the SHIFT button down.
10. Test tone button (TEST) (See page E14.)
11. Menu button (MENU)
Number buttons (1 – 9, 0)
Angle button (ANGLE)
Angle replay button (A.REPLAY)
Zoom button (ZOOM)
12. Directional arrow buttons (o, a, p, b)
13. On-screen display button (ON SCREEN)
14. Play button (a)
15. Stop button (n)
Audio button (AUDIO)
Sleep button (SLEEP)
3. TV control buttons
16. Skip/Next/Previous buttons (f, e)
17. Subtitle On/Off button (S.T.ON/OFF)
18. Subtitle change button (S.T.CH)
19. Repeat button (REPEAT)
20. A-B repeat button (A-B REP)
21. Last memory button (L.MEMO)
22. Picture mode/Search mode button
(PICTURE MODE/SEARCH MODE)
Note:
At Search mode, press the button while holding the SHIFT
button down.
23. Forward slow button (F.SLOW I a)
24. Reverse slow button (R.SLOW bI)
25. Fast forward/Fast reverse buttons (d, c)
26. Pause/Step button (k)
Power button (TV POWER)
TV/VIDEO select button (TV/VIDEO)
Channel scanning buttons (-TV CH +)
4. Tuner controls
FM mode button (FM MODE)
Tuner function/Band select button (TUNE/BAND)
Tuning buttons (- TUNE +)
Preset tuning buttons (- PRESET +)
5. Amplifier controls
Surround button (SURROUND)
Muting button (MUTE)
Bass button (BASS)
Sound preset button (SOUND)
Function button (FUNCTION)
Volume buttons (- VOLUME +)
6. Shift button (SHIFT)
27. Top menu button (TOP MENU)
28. Enter button (ENTER)
29. Setup button (SETUP)
30. Program/Random play button (PROGRAM/RANDOM)
Download from Www.Somanuals.c-oEm5. -All Manuals Search And Download.
Inserting batteries
To set the remote control code for TV
This remote control can operate the basic functions of TVs made
by the manufacturers listed below.
1
2
To enter the remote control code for your brand of TV, follow the
steps below.
1. In the chart below, find the code corresponding to your brand
of TV .
2. While holding down [TV POWER], enter the 2-digit code
using the number buttons [0 - 9], then release [TV POWER].
•
The remote control is now set to operate your TV.
Two "AA" batteries
(not supplied)
TV brands
ADMIRAL
EMERSON
FISHER
Code
Note:
05, 10, 13
Remove the batteries if the remote control is not to be used for a
month or more. Batteries left in the unit may leak and cause
damage.
17
03
GE
07
IMPORTANT NOTE:
GOLD STAR
HITACHI
JVC
01
02
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL
COUNTY SOLID WASTE AUTHORITY.
15
MAGNAVOX
MATSUSHITA
MITSUBISHI
PANASONIC
QUASAR
RCA
08
12, 18
14
12, 18
12, 18
06
Remote control range
Remote sensor
SAMSUNG
SANYO
16
03
SHARP
00, 13
11
SONY
TECHNOL ACE
TOSHIBA
ZENITH
05
04
09, 10
Within approx. 20 feet
(6 meters)
Notes:
30°
30°
•
Only remote-controlled TVs can be operated using this remote
control. (Refer to your TV instruction manual for more details.)
There may be some TV models that cannot be operated with
this remote control. If this is the case, use the original remote
control supplied with the TV.
•
IMPORTANT NOTE:
If the batteries in the remote control are changed, the code
settings for the TV must be re-entered.
Write your code number below for future reference.
TV:
Download from Www.Somanuals.c-oEm6. -All Manuals Search And Download.
BASIC CONNECTIONS
Note:
Label of Speaker Wire Color Tube
Use
Do not connect the power cord to a 120V AC 60Hz
outlet until all connections have been made.
(Positive Polarity)
FRONT R
FRONT L
CENTER
Red
Front right speaker
Front left speaker
Center speaker
White
Green
Gray
Blue
Speaker Connections
To achieve proper stereo reproduction, connect the
speaker wires without shorting to adjacent wires as REAR R
shown below.
Surround right speaker
Surround left speaker
Subwoofer
REAR L
SUBWOOFER
Front left speaker
Violet
Front right speaker
Center speaker
Twist and pull it
off.
Black
Red
Black
Red
Black
Red
Red
Green
White
Green
Violet
INPUT
Black
Red
Blue
Gray
Surround right speaker
Surround left speaker
Black
Red
Black
Red
Gray
Blue
Subwoofer
Download from Www.Somanuals.c-oEm7. -All Manuals Search And Download.
Speaker Placement
Need help? Call
1-800-813-3435
Front right speaker
Center speaker
Front left speaker
Surround right speaker
Subwoofer
Place it near the Front speaker.
Surround left speaker
Center speaker
Front left speaker
Subwoofer
Front right speaker
The supplied speakers have built-in magnetic stray field
compensation. They may be placed close to a TV without affecting
the color purity.
The five speakers are all the same and can be used for Front left
and right, Center, Surround left and right speakers.
30° 30°
The front, center, and surround speakers should be placed at
approximately the same distance from the listening position.
Place the front left and right speakers either side of the TV.
Place the center speaker directly above the TV.
Place the surround speakers either sides of the listening position,
or slightly to the rear, approximately 2 feet ~ 3 feet 3 inches (60
cm ~ 1 meter) higher than ear level.
120°
Surround left
speaker
Surround right
speaker
Notes:
The subwoofer can be placed near the front speaker and not too
far from the TV.
•
•
•
The angles in the diagram are approximate.
Please refer to “Setting Audio” on page E33.
Set the TV’s built-in speaker volume to minimum.
Example: To hang the speaker on a wall
Example: To mount the speaker with a stand
Approximately 3/32 inch
(2.5 mm)
Stand (not supplied)
Built-in nut for 3/16 machine
screw
Machine screw
(not supplied)
Round head screw
(not supplied)
Note: Be careful of dropping the speaker system, it might cause damage or serious injuries.
Download from Www.Somanuals.c-oEm8. -All Manuals Search And Download.
Important Information:
TV Connections
To connect the unit to a TV, TV must have a Video input jack
(RCA-type) at least. You cannot connect it to an antenna
terminal of TV.
Using MONITOR OUT VIDEO jack
Connect the Video cable with yellow connectors (supplied)
between the MONITOR OUT VIDEO jack of the unit and the
VIDEO INPUT jack on the TV.
TV
Partial back panel
To VIDEO INPUT jack
AUDIO
VIDEO
INPUT
1
R-AUDIO-L VIDEO
To MONITOR OUT VIDEO jack (Yellow)
Video cable (supplied)
Notes:
•
•
Please refer to your TV instruction manual.
When you connect the unit to your TV, be sure to turn off the
power and disconnect both units from the wall outlet until all
the connections have been made.
Need help? Call
1-800-813-3435
•
Do not connect the MONITOR OUT (S-VIDEO/VIDEO) and
COMPONENT VIDEO OUT jacks of the unit to a VCR directly.
The playback picture will be distorted because DVD video
discs are copy protected.
Using COMPONENT VIDEO OUT jacks
Note:
Please follow the steps before turn on the power.
Using MONITOR OUT S-VIDEO jack
Note:
Please follow the steps before turn on the power.
1. If your TV has the COMPONENT VIDEO INPUT jacks,
connect the *Component video cable (not supplied) between
the COMPONENT VIDEO OUT jacks of the unit and the
COMPONENT VIDEO INPUT jacks of the TV.
1. If your TV has the S-VIDEO INPUT jack, connect the *S-
video cable (not supplied) between the MONITOR OUT S-
VIDEO jack of the unit and the S-VIDEO INPUT jack of the
TV. (The MONITOR OUT VIDEO jack connection is not
necessary.)
(The MONITOR OUT VIDEO or S-VIDEO OUT jack
connection is not necessary.)
You can enjoy high quality picture playback.
2. Set the VIDEO OUT SELECT switch to the COMPONENT
You can enjoy clearer picture playback.
position.
2. Set the VIDEO OUT SELECT switch to the S position.
TV with COMPONENT VIDEO INPUT jacks
TV with S-VIDEO INPUT jack
2
2
COMPONENT VIDEO INPUT
S-VIDEO IN 1
Y
P
B
PR
Partial back
panel
Partial back
panel
Green
Blue Red
1
1
*S-video cable (not supplied)
*Component Video cable (not supplied)
*Please consult your local audio/video dealer.
*Please consult your local audio/video dealer.
Download from Www.Somanuals.c-oEm9. -All Manuals Search And Download.
Using RF Modulator
If your TV does not have a Video input jack and has an antenna
terminal only, please purchase the *RF Modulator (not supplied).
(*Please consult your audio/video dealer.)
1
Example: Unit, TV and RF Modulator connections
RF Modulator
TV
A/V INPUT JACKS
TO TV
ANT. IN
Partial back panel
CHANNEL
VIDEO
R-AUDIO-L
3
4
4
VHF/UHF
ANTENNA
IN
3
2
To MONITOR OUT VIDEO jack (Yellow)
1. Connect the antenna cable (not supplied) to the ANT. IN
terminal of the RF Modulator.
2. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV terminal of the RF Modulator and the VHF/UHF
ANTENNA IN terminal of the TV.
4. Turn on the TV, and set the channel number (CHANNEL3 or
CHANNEL4) on both TV and RF Modulator, whichever is not
used for regular broadcasts in your area.
Note:
3. Connect the Video cable with yellow connectors (supplied)
between the MONITOR OUT VIDEO jack of the unit and the
VIDEO input jack of the RF Modulator.
For more details, please refer to the instruction manual of the RF
Modulator.
Example: Unit, VCR, TV and RF Modulator connections
TV
To MONITOR OUT VIDEO jack
(Yellow)
5
VHF/UHF
ANTENNA
IN
1
3
VHF/UHF
FROM ANT.
VIDEO
IN
IN
OUT
A/V INPUT JACKS
TO TV
ANT. IN
L
L
CHANNEL
TO TV
VIDEO
R-AUDIO-L
3
4
3
4
R
R
OUT
AUDIO
CHANNEL
Partial back panel
6
4
6
RF Modulator
2
HiFi Stereo VCR
1. Connect the antenna cable (not supplied) to the VHF/UHF
FROM ANT IN terminal of the VCR.
2. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV OUT terminal of the VCR and the ANT. IN
terminal of the RF Modulator.
3. Connect the 75-ohm coaxial cable (not supplied) between
the TO TV terminal of the RF Modulator and the VHF/UHF
ANTENNA IN terminal of the TV.
5. Connect the Video cable with yellow connectors (supplied)
between the MONITOR OUT VIDEO jack of the unit and the
VIDEO input jack of the RF Modulator.
6. Turn on the TV, and set the channel number (CHANNEL3 or
CHANNEL4) on all TV, VCR and RF Modulator, whichever
is not used for regular broadcasts in your area.
Note:
4. Connect the audio cables (not supplied) between the VIDEO
(AUDIO) IN 1 or 2 jacks of the unit and the AUDIO OUT jacks
of the VCR. Use the red connectors for the right-R jacks and
the white connectors for the left-L jacks.
For more details, please refer to the instruction manual of the RF
Modulator.
Download from Www.Somanuals.-cEom1.0A-ll Manuals Search And Download.
Antenna Connections
CAUTION:
When installing an outdoor antenna, follow the installation
instructions in the attached “IMPORTANT SAFETY
INSTRUCTIONS”.
FM antenna
The FM indoor antenna lead wire is sufficient to receive most
local FM broadcasts and should be connected to the rear FM
75Ω terminal. Extend the antenna lead wire as straight as possible
and, while listening to the sound from the system, secure it in a
position where the best FM reception is found.
FM outdoor antenna
(not supplied)
In fringe areas, or where reception is distorted or noisy, an FM
outdoor antenna (not supplied) should be connected instead of
the FM indoor antenna lead wire. The terminals will accept 75-
ohm coaxial cable.
Ground
AM antenna
The AM loop antenna is sufficient to
receive most local AM broadcasts.
Assemble the loop antenna.
Antenna discharge unit (not supplied)
AM loop antenna
2
1
1
Unwind the antenna wires, then
connect the plug to the AM LOOP
terminal. If you have difficulty inserting
the plug, turn it over and reinsert it.
Place the loop antenna in a position
which yields the best AM reception, or
attach it to a wall or other surface as
shown.
FM indoor antenna
lead wire
3
2
Screws (not supplied)
Plug
NOTE:
To minimize noise...
•
Keep the speaker wires, power cord and all other system
connection cables away from the loop antenna.
Do not place the antenna close to a TV or speaker.
75-ohm coaxial cable
(not supplied)
•
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Section 820-40 of the NEC which provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
Additional Connection Examples
TV
Headphones jack (PHONES)
Connect a pair of stereo headphones with miniplug (8 ohms - 32
ohms, not available from SANYO) to the PHONES jack for
monitoring or for private listening. The speakers are automatically
disconnected when headphones are connected.
PHONES
1st video equipment input jack
(VIDEO (AUDIO) IN 1)
Connect an audio cable (not supplied) from
the audio output jacks of the TV to the VIDEO
(AUDIO) IN 1 jacks.
Power Supply
L
AUDIO
OUTPUT
R
Connect the power cord to a 120VAC 60Hz outlet. This unit is
equipped with a polarized plug. If you have difficulty inserting the
plug, turn it over and reinsert it. If the unit will not be used for a
long time, disconnect the AC plug from the AC outlet.
Audio cable
(not supplied)
Notes:
•
Before plugging the power cord into an AC outlet, make sure
that all the connections have been made.
The unit is not disconnected from the AC power unless the
power cord is unplugged from the AC outlet.
2nd video equipment input jack (VIDEO (AUDIO) IN 2)
Connect an audio cable (not supplied) from the audio output
jacks of the video equipment to the VIDEO (AUDIO) IN 2 jacks.
•
Download from Www.Somanuals.-cEom1.1A-ll Manuals Search And Download.
BEFORE OPERATION
Common Operation
q
FUNCTION
a
(Play)
VOLUME z/ON
(Open/Close)
Turning the power on and off
Press [z/ON] to turn the power on.
•
“HELLO” appears briefly on the FL display.
(After connecting the power cord, when you press [z/ON] for the
first time, the volume-reset feature automatically sets the initial
volume level.)
z/ON
OPEN/CLOSE
When the power cord is connected to the AC outlet, the unit will
respond to commands from the remote control.
To turn the power off, press [z/ON] again.
TUNE/BAND
FUNCTION
•
“GOOD-BYE” appears briefly on the FL display.
MUTE
BASS
Smart start function
SOUND
If the following buttons are pressed when the power is turned
off, the unit turns on automatically and the selected source is
activated.
4
– VOLUME +
[q], [a] (Front panel of the unit)
5
[OPEN/CLOSE], [a], [TUNE/BAND] (Remote control)
Selecting the source
Press [FUNCTION] to select the desired source. Each time the
button is pressed, the display changes as follows:
a
(Play)
DVD/CD
VIDEO 1
VIDEO 2
FM TUNER
AM TUNER
Selecting the sound mode
1. Press [SOUND] repeatedly to select the desired sound mode
(“BASS”, “TREBLE”, “CINE (Cinema)” or “QS (Q-Surround”).
2. Press the button as desired.
Sound mode
BASS
Press
Display change
“+5” ~ “-5”
•
When the source selection is changed, disc playback
automatically stops.
o or p
o or p
ENTER
ENTER
TREBLE
CINE
“+5” ~ “-5”
Adjusting the volume
“ON” or “OFF”
“LOW” or “HI”
Rotate [VOLUME] (or press [VOLUME] + or - on the remote
control). The volume level appears on the FL display (VOL 0 ~
VOL MAX).
QS
Note for “CINE”:
When enjoying a DVD disc with the volume set low at night,
select this mode. It enhances spoken lines making speech
clearer.
To reduce the volume temporarily (muting)
Press [MUTE] on the remote control. “MUTE” blinks on the FL
display.
To restore the previous volume setting, press [MUTE] again.
3. Repeat steps 1 to 2 for another sound mode.
4. Press [SOUND] repeatedly to close the display.
Bass boost system
Press [BASS] repeatedly to select the desired bass boost effect.
BOOST vBASS OFF vNORMAL vBOOST . . .
Download from Www.Somanuals.-cEom1.2A-ll Manuals Search And Download.
Selecting Surround Mode
Press [SURROUND] to select the surround mode.
Each time the button is pressed, the surround mode changes as follows:
AUTO vQS 5.1 ST vQS 5.1 MN v2.1ch vAUTO…
SURROUND
Function
FL display
Description
The unit selects the surround mode automatically depending on the disc.
DVD/CD
AUTO
•
If a DVD disc is encoded with Dolby Digital, “sD” appears on the FL display, and it is played
back with Dolby Digital 5.1 channel surround sound.
Not all DVD discs are encoded with Dolby Digital 5.1 channel surround sound.
If a DVD disc is encoded with Dolby Surround, “sD” and “sPL” appear on the FL display at
the same time. The surround mode is set to Dolby Pro Logic mode.
•
•
Audio CD, MP3 and WMA discs are played back with Q-Surround 5.1 channel surround sound.
QS 5.1 ST
Disc is played back with Q-Surround 5.1 channel surround sound.
For 2-channel source, it uses Virtual 5.1 channel surround sound.
When using a monaural source, select this mode. It uses Virtual 5.1 channel surround sound.
The surround mode is set to 2.1 channel (Front left and right speakers, and Subwoofer).
The surround mode is set to Q-Surround 5.1 channel surround sound.
QS 5.1 MN
2.1ch
AUTO
VIDEO 1
VIDEO 2
The surround mode is set to Q-Surround 5.1 channel surround sound.
For 2-channel source, it uses Virtual 5.1 channel surround sound.
FM TUNER
AM TUNER
QS 5.1 ST
When using a monaural source, select this mode. It uses Virtual 5.1 channel surround sound.
The surround mode is set to 2.1 channel (Front left and right speakers, and Subwoofer).
QS 5.1 MN
2.1ch
When headphones are connected while any of the surround modes are selected, the surround mode changes as follows:
AUTO HP vQS HP ST vQS HP MN v2ch HP vAUTO HP…
Function
FL display
Description
DVD/CD
VIDEO 1
AUTO HP
QS HP ST
Q-Surround effect.
VIDEO 2
FM TUNER
AM TUNER
Surround effect when monaural program material used.
Normal 2-channel sound.
QS HP MN
2ch HP
Notes:
•
DVD video discs with DTS may not work correctly. You can see the picture on the TV screen, but there is no sound.
In this case, press the AUDIO button repeatedly while holding the SHIFT button down to select Dolby Digital sound. (See page E24.)
When receiving weak FM broadcasts, set the mode to “2.1ch”. The sound quality may improve.
•
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom1.3A-ll Manuals Search And Download.
Adjusting the Speaker Volume Balance
This unit is set to the standard level before shipping from the
factory. You may not need any adjustment.
But, depending on the size of the room and the placement of the
speakers, you may benefit from a fine adjustment.
In this case, follow the steps below. Please use the remote
control when the test tone sounds.
3, 6
1
4
5
1. Press [FUNCTION] to select the “DVD/CD” function.
2. Press [n] to stop playback completely.
3. Press [TEST] on the remote control.
2
The “Speaker” screen appears on the TV screen.
Speaker
4. Press [VOLUME] + or - until the test tone becomes a
comfortable level.
Front-R
Front-L
0
Center
5. If the test tone level is not the same from each speaker, press
[p] or [o] to adjust it while the speaker is activated.
Surround-R
Surround-L
The level appears on the TV screen and FL display.
“FNT-L 0” appears on the FL display.
The test tone will be heard from each speaker sequentially as
follows:
Front-L:
Center:
Front-R:
“0” ~ “-10” appears.
“+10” ~ “-10” appears.
“0” ~ “-10” appears.
Surround-R: “+10” ~ “-10” appears.
Surround-L: “+10” ~ “-10” appears.
TV screen
Front-L
Center
Front-R
Surround-R SUR-R 0
Surround-L SUR-L 0
FL display Speaker
FNT-L 0
CENT 0
FNT-R 0
Front left speaker
Center speaker
Front right speaker
Surround right speaker
Surround left speaker
If necessary, repeat this step again.
6. Press [TEST] to turn the test tone off.
Note:
If no adjustments are made, the original display returns after
the test tone cycles around 5 times.
Adjusting the Subwoofer Level
1. Press [TRIM] while holding [SHIFT] down.
“FNT-L 0” appears on the FL display.
Note: No test tone.
TRIM
1, 4
2. Press [ENTER] repeatedly to select “SUB.W”.
Note:
SHIFT
Each time the button is pressed, the FL display will show the
selected speaker and tone level.
3. Press [p] or [o] to adjust the level as desired.
SUB.W: “+10” ~ “-10” appears.
Note:
3
2
If another speaker is selected, the level can also be changed
as above.
4. Press [TRIM] while holding [SHIFT] down to turn it off.
Note:
If no adjustments are made, the original display returns after
approximately 10 seconds.
IMPORTANT INFORMATION:
Set the delay time for your center and surround speakers. See
“Setting Audio” on page E33.
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom1.4A-ll Manuals Search And Download.
PLAYABLE DISCS
The following types of discs can be played on this unit.
CAUTION:
•
Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be
played.
Disc type and logo mark
•
This unit can play back the DVD-R that has recorded movie
data as well. However, some DVD-Rs cannot be played back
depending on the recording conditions.
The DVD-R that has no movie data cannot be played back.
This unit is to be used exclusively with the NTSC color
system. PAL and SECAM system discs cannot be used with
this unit.
DVD-Video
Audio CD
TM
•
•
•
•
For MP3/WMA CD, please see page E28.
For Picture/JPEG CD, please see pages E30 and E31.
Region Number
Region number (Regional restriction code) is built-in to the unit
and DVD video discs.
Handling, Storing and Cleaning Discs
Region number “1” or “ALL” of DVD video discs can be used on
this unit.
•
•
•
Fingerprints and dust should be carefully wiped from the
signal surface of the disc (glossy side) with a soft cloth.
Wipe in a straight motion from the center to the outside of
the disc.
Never use chemicals such as record cleaning sprays,
antistatic sprays or fluids, benzene or thinner to clean the
discs. These chemicals will permanently damage the plastic
surface of the disc.
ALL
1
DVD Video Disc
DVD video discs are divided into titles, and the titles are sub-
divided into chapters.
Title 1
Title 2
To remove a disc from its storage case, press down on the
center of the case and lift the disc out, holding it carefully by
the edges.
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
•
•
Discs should be returned to their cases after use to protect
them from dust and scratches.
To prevent warping the disc, do not expose it to direct
sunlight, high humidity or high temperatures for extended
periods of time.
There are the marks on some DVD video disc package.
Examples:
Multiple languages
3
•
Do not apply paper or write anything on either side of the
disc. Sharp writing instruments, or the inks used in some
felt-tip pens, may damage the surfaces of the disc.
2
Multi-language subtitles
Multi-angle
3
Multi-aspect
16:9 LB
1
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Region Number
Closed caption
Audio CD Disc
Audio CD discs are divided into tracks.
Track 1 Track 2 Track 3
Track 4
Track 5
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom1.5A-ll Manuals Search And Download.
DISC PLAYBACK
Preparations
Basic Playback
Notes:
•
Turn on the TV and select the video input source.
•
•
Do not touch the disc tray while it is moving.
Never place anything except a disc on the disc tray. Foreign
objects can damage the unit.
•
•
Do not apply excessive force to the disc tray.
Discs must be placed on the disc tray one at a time.
VIDEO 1
TV
When operation buttons are pressed, that operation is displayed
on the TV screen. The display disappears after several seconds.
To use the remote control for TV
Note:
You must set the remote control code for TV first. (See Page
E6.)
1. Press [TV POWER] to turn on the power.
•
When using the remote control, the Transmitter
Window on the remote control must be pointed toward
your TV.
2
1, 3
2. Press [TV/VIDEO] to select the video input source.
3. Set the TV volume minimum.
Notes:
1, 3
•
Only remote-controlled TVs can be operated using this
remote control. (Refer to your TV instruction manual for
more details.)
•
There may be some TV models that cannot be operated
with this remote control. If this is the case, use the
original remote control supplied with the TV.
1. Press [q] on the unit (or [OPEN/CLOSE] on the remote
control).
•
Select the playback picture size according to the aspect ratio
of the TV. (See “Setting Display” in “INITIAL SETTINGS” on
Page E32.)
•
“OPEN” appears on the FL display and the disc tray
opens.
•
“SANYO” logo appears on the TV screen.
4:3 LB
4:3 PS
Note:
16:9
(Letterbox):
(Panscan):
To open close the disc tray, be sure to use [q] (or [OPEN/
CLOSE]. Do not press the disc tray with your hand.
2. Place the disc with the label facing up on the disc tray.
or
For 5-inch (12cm) disc
For 3-inch (8cm) disc
Important Note:
•
This instruction manual explains the basic instruction of this
unit using the remote control unit.
3. Press [q] (or [OPEN/CLOSE]) again.
•
Some DVD video discs have different functions that may
not be explained in this instruction manual. You may need
extra instructions. In this case, please follow the instructions
displayed on the TV screen or jacket or case of the disc.
•
•
The disc tray closes.
“READING” appears on the FL display.
Note:
Some discs may start playback automatically.
•
•
“
” may appear on the TV screen during operation. This
icon means that the function is not available on the disc
now.
For improvement, on-screen displays subject to change
without notice.
Download from Www.Somanuals.-cEom1.6A-ll Manuals Search And Download.
Stopping Playback
[DVD]
•
Press [n] once during playback. “Resume n” appears briefly
on the TV screen.
When you press [a], playback starts automatically from the
point where you stopped. “a” appears briefly on the TV
screen.
4
Note:
Some discs may not resume playback.
Press [n] twice during playback. “n” appears briefly on the
TV screen and playback stops completely.
When you press [a], playback starts from the beginning of
the disc.
•
4
[CD]
Press [n] once during playback. The unit stops completely.
•
4. Press [a] to start playback.
Example (FL display):
D
C
n
a
(Play)
(Stop)
Chapter Number Elapsed playing time
Notes:
4
•
In some discs, even if 4:3 PS is selected, the black bands
may remain on the screen.
ENTER
•
If the disc is loaded with the label side downward (and it is a
single sided disc), or if a badly scratched disc is loaded, “NO
DISC” (or “NO PLAY”) appears. If this occurs, load the disc
correctly or replace the disc.
a
(Play)
n
(Stop)
If a DVD disc menu screen appears on the TV screen...
L.MEMO
MENU
ContinuingPlaybackfromWhereYouStopped
Watching (LAST MEMO PLAY), for DVD only
TV
Languages &PAluadyioMSoevt-Uiep
Subtitles
Theatrical Trailers
Scene Selections
1. Press [L.MEMO] to stop playback.
“Last Memo n” appears briefly on the TV screen.
“L.M.” and “STOP” appear on the FL display.
2. Remove the disc or turn off the power.
1. Press [o], [a], [p] or [b] (or the number
buttons) to select the desired menu.
2. Press [ENTER].
3. Load the disc (and press [a]), or turn on the power.
“Last Memo Play?” appears on the TV screen.
Playback of the selected menu starts.
4. Press [4] to select “Yes”.
Note:
For more details, please refer to the jacket or case of the disc.
Last Memo Play?
Yes
No
To lock the disc tray
You can lock the disc tray to prevent misuse of young children.
While the disc tray is opened, press the q button on the unit
until “LOCKED” appears on the FL display (or “Disc Tray
Locked” appears on the TV screen). (The disc tray closes.)
Clear
(The memory is released.)
5. Press [ENTER].
Playback resumes from the point where you stopped.
If desired, press [L.MEMO] again.
•
The qbutton (or the OPEN/CLOSE button) will not function.
To release this mode, press the q button on the unit until
“UNLOCKED” appears on the FL display (or “Disc Tray
Unlocked” appears on the TV screen).
Notes:
•
•
Point on up to 3 discs can be memorized.
The Last Memo Play mode may not work correctly with some
discs.
Download from Www.Somanuals.-cEom1.7A-ll Manuals Search And Download.
Selecting a DVD Menu
Notes:
•
•
The operation may differ depending on the disc used.
Selecting a menu may not be possible on some discs.
1
2
1. Press [MENU].
The main menu screen will appear.
3
Note:
Press [MENU] again to resume playback.
2. Press [4], [5], [b] or [a] (or the number buttons) to select the
desired menu.
3. Press [ENTER]
The selected menu playback starts.
Selecting a Top Menu [DVD]
Notes:
•
•
The operation may differ depending on the disc used.
Selecting a top menu may not be possible on some discs.
2
1
1. Press [TOP MENU].
3
The top menu will appear (if the disc contains a top menu).
2. Press [4], [5], [b] or [a] (or the number buttons) to select the
desired menu.
3. Press [ENTER].
The selected menu playback starts.
Chapter (Track) Skip
Skipping forward
Press [e] during playback to skip to the next chapter (or track).
“e” appears briefly on the TV screen.
f
e
A chapter (or track) is skipped each time the button is pressed.
Skipping backward
Press [f] during playback to skip back to the beginning of the
chapter (or track) currently play.
“f” appears briefly on the TV screen.
Press the button again immediately to skip back to the beginning
of the previous chapter (or track).
Note:
e
f
You can skip only through the chapters, not over the title on the
DVD disc.
Need help? Call
1-800-813-3435
Important Note:
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Download from Www.Somanuals.-cEom1.8A-ll Manuals Search And Download.
Title Search [DVD]
1. Press [SEARCH MODE] once while holding [SHIFT] down
during playback or in the stop mode.
The title search screen appears on the TV screen.
Example:
2
CLEAR
SHIFT
Title Search
-- /28
2. Press the number button(s) to enter the title number.
Example:
To select Title No.3, press [3].
To select Title No.10, press [1], then [0].
To select Title No.24, press [2], then [4].
Note:
1
3
If you make a mistake, press [CLEAR].
3. Press [a].
Playback starts from the selected title.
SEARCH MODE
Chapter Search [DVD]
Time Search [CD]
1. Press [SEARCH MODE] twice while holding [SHIFT] down
during playback.
1. Press [SEARCH MODE] once while holding [SHIFT] down
during playback.
The chapter search screen appears on the TV screen.
Example:
The time search screen appears on the TV screen.
Time Search
--:--:--
Title
01 Chapter Search
-- /35
2. Press the number button(s) to enter the chapter number.
Example:
2. Press the number button(s) to enter the time.
Example:
To select Chapter No.3, press [3].
To select Chapter No.10, press [1], then [0].
To select Chapter No.24, press [2], then [4].
Note:
2 minutes 5 seconds
42 minutes 39 seconds
Note:
Press [2], [0] and [5].
Press [4], [2], [3] and [9].
If you make a mistake, press [CLEAR].
If you make a mistake, press [CLEAR].
3. Press [a].
3. Press [a].
Playback starts from the searched time in the track.
Playback starts from the selected chapter.
Time Search [DVD]
1. Press [SEARCH MODE] three times while holding [SHIFT]
down during playback.
Track Search [CD]
1
The time search screen appears on the TV screen.
Time Search
--:--:--
2. Press the number button(s) to enter the time.
Example:
2
20 minutes 5 seconds
42 minutes 39 seconds
Press [2], [0], [0] and [5].
Press [4], [2], [3] and [9].
1 hour 4 minutes 35 seconds Press [1], [0], [4], [3] and [5].
Note:
If you make a mistake, press [CLEAR].
1. Press the number buttons during playback or in the stop
mode.
Example:
To select Track No. 3, press [3].
To select Track No. 10, press [1], then [0].
To select Track No. 24, press [2], then [4].
3. Press [a].
Playback starts from the searched time.
2. Press [a].
Playback starts from the selected track.
Important Note:
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Download from Www.Somanuals.-cEom1.9A-ll Manuals Search And Download.
Fast Playback
Fast forward playback
Press [c] repeatedly to select the fast speed forward playback.
[DVD]
c1 vc2 vc3 vc4 (4 steps)
[CD]
c1 vc2 (2 steps)
a
Press [a] to return to normal playback.
Fast reverse playback
Press [d] repeatedly to select the fast speed reverse playback.
d
c
[DVD]
d1 vd2 vd3 vd4 (4 steps)
[CD]
d1 vd2 (2 steps)
Press [a] to return to normal playback.
Important Note:
Note:
“
” may appear on the TV screen during operation. This icon
The sound is muted during fast playback in DVD.
means that the function is not available on the disc now.
Slow Motion Playback [DVD]
Forward slow playback
Press [F.SLOW ] repeatedly to select the forward slow speed
playback.
1 v
2 v
3 v
4 (4 steps)
Press [a] to return to normal playback.
a
Reverse slow playback
Press [R.SLOW ] repeatedly to select the reverse slow speed
playback.
R.SLOW
F.SLOW
1 v
2 v
3 v
4 (4 steps)
Press [a] to return to normal playback.
Note:
The sound is muted during slow motion playback.
Still Picture (Pause)
Press [k] during playback.
•
•
“k” appears on the FL display.
“k” appears briefly on the TV screen.
a
k
[DVD]
Still picture mode
[CD]
Pause mode
Press [a] to return to normal playback.
Frame by Frame Advance Playback
Note: The sound is muted.
[DVD]
Press [k] during still picture.
•
“ka” appears briefly on the TV screen.
Each time the button is pressed, the picture advances one frame.
Press [a] to return to normal playback.
Notes:
Need help? Call
1-800-813-3435
•
•
The sound is muted.
Frame playback is operated forward only.
Download from Www.Somanuals.-cEom2.0A-ll Manuals Search And Download.
Picture Zoom (Pin Point Zoom) [DVD]
1. Press [ZOOM] while holding [SHIFT] down during normal/
slow playback or still picture.
The pin point guide appears on the TV screen.
ZOOM
SHIFT
2
1, 3, 4
1
4
7
2
5
8
3
6
9
The guide divides the screen into nine, and the number
shows the point.
2
Note:
If you quit the screen, press [ZOOM] while holding [SHIFT]
down.
2. To select the point, do one of the following:
3. Press [ZOOM] while holding [SHIFT] down.
•
•
Press [o], [a], [p] or [b], and press [ENTER].
Press the number button.
•
The screen is magnified more than “
1”.
•
•
“ 2” appears briefly on the TV screen.
If necessary, press [o], [a], [p] or [b] repeatedly to move
the screen as desired.
•
•
•
The screen is magnified.
“
1” appears briefly on the TV screen.
4. To return to the original screen, press [ZOOM] while holding
[SHIFT] down.
If necessary, press [o], [a], [p] or [b] repeatedly to move
the screen as desired.
•
“
Off” appears briefly on the TV screen.
Note:
Pin Point Zoom may not work on some discs.
Viewing from a Desired Camera Angle
(Multi-Angle) [DVD]
Angle Replay
During Multi-angle playback screen, press [A.REPLAY] while
holding [SHIFT] down.
The unit skips back to last approximately 10 seconds, changes it
to the next camera angle and plays it, and continues playback.
If desired, press both buttons again.
Some DVD video discs may contain scenes which have been
shot simultaneously from a number of different camera angles.
The jacket or case of discs that are recorded with angles will be
marked.
Example:
ANGLE
3
A.REPLAY
Note:
The recorded angles differ depending on the disc used.
SHIFT
1. Play the disc that is recorded with angles.
2. Press [ANGLE] repeatedly while holding [SHIFT] down until
the desired angle appears.
Example:
Important Note:
“
” may appear on the TV screen during operation. This icon
3/5
means that the function is not available on the disc now.
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom2.1A-ll Manuals Search And Download.
Repeat Playback
Important Note:
Press [REPEAT] during playback (or programmed or random
playback) of the title (or track) you want to repeat.
Each time the button is pressed, the repeat mode will be changed
as follows.
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
[DVD]
TV screen
Chapter
FL display Operation
REP.1
Repeat of chapter being played
Title
Off
ALL REP. Repeat of title being played
Normal playback mode
[CD]
During Normal Playback
REPEAT
TV screen
FL display Operation
REP.1 Repeat of track being played
ALL REP. Repeat all tracks
1
All
Off
Normal playback mode
During Programmed Playback
TV screen FL display Operation
Program 1
During Random Playback
TV screen
FL display Operation
REP.1 Repeat of track being played
REP.1
Repeat the programmed track
being played
1
All
Off
ALL REP. Repeat all tracks at random
Original random playback mode
Program All ALL REP. Repeat all programmed tracks
Off
Original programmed playback
mode
Point A
Point B
Designated Range Repeat Playback
(A-B Repeat)
1. Press [A-B REP] during playback at the beginning of the
section you want to repeat (Point A).
•
•
“
A-” appears on the TV screen.
“REP. A-” appears, and “A-” blinks on the FL display.
2. Press [A-B REP] again at the end of the section you want to
repeat (Point B).
•
•
“
B” appears briefly on the TV screen.
“REP. A-B” remains lit on the FL display.
The section between points A and B is played repeatedly.
3. To return to normal playback, press [A-B REP] again.
•
“
Off” appears briefly on the TV screen.
Note:
Repeat playback or A-B repeat playback mode may not work
correctly with some discs.
A-B REP
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom2.2A-ll Manuals Search And Download.
Random Playback [CD]
1. Press [PROGRAM/RANDOM] once in the stop mode.
•
•
“Random” appears on the TV screen.
“RND” blinks on the FL display.
1
2
2. Press [a] to begin random playback.
“RND” remains lit on the FL display.
The unit will automatically select tracks at random.
•
Notes:
n(Stop)
•
•
To stop random playback, press [n].
The A-B REP and SEARCH MODE modes do not work
during Random Playback.
Programmed Playback [CD]
Up to 20 selections can be programmed.
1
2
Programming procedure
1. Press [PROGRAM/RANDOM] twice in the stop mode.
•
•
“Program Mode” screen appears on the TV screen.
“PGM” blinks on the FL display.
CLEAR
2. Press the number buttons to select the track number.
Example:
To select Track No.3, press [0], then [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
3
5
•
•
If you make a mistake, press [CLEAR].
To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
3. Press [p] to move the highlighted box down.
To clear the program one by one
Example:
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [4] or [5] to select the track number.
Program Mode
All Clear
3. Press [CLEAR].
1 03
2 --
3 --
4 --
5 --
6 --
7 --
8 --
9 --
10 --
11 --
12 --
13 --
14 --
15 --
16 --
17 --
18 --
19 --
20 --
To clear all the programs
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [4] to select “All Clear”.
4. Repeat steps 2 and 3 as above to select another track.
3. Press [ENTER].
5. Press [a] to start playback.
To change the program
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
•
“PGM” remains lit on the FL display.
When all programmed selections have played, the unit stops
automatically.
•
The program contents are retained in memory.
2. Press [4] or [5] to select the track number.
Note:
3. Press the number buttons to select the track number to be
replaced.
To play the program again, press [PROGRAM/RANDOM] twice
to call up the “Program Mode” screen, then press [a].
Note:
To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
Download from Www.Somanuals.-cEom2.3A-ll Manuals Search And Download.
Selecting Subtitle Language [DVD]
This operation works only with discs on which multiple subtitle
languages are recorded.
1. Press [S.T.ON/OFF] during playback.
The subtitle language mark appears. (Example:
If “ Off” appears, press the button again.
1/3 en)
1
2
2. Press [S.T.CH] repeatedly until the desired subtitle language
appears on the TV screen.
Example:
3/3 fr
French
Important Note:
After few seconds, “
” disappears.
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Notes:
•
•
In some cases, the subtitle language is not changed to the
selected one.
When a disc supporting closed caption is played, the subtitle
and the closed caption may overlap each other on the TV
screen. In this case, turn the subtitle off.
Need help? Call
1-800-813-3435
•
•
•
•
When the desired language is not selected even if the button
is pressed, the language is not available on the disc.
When the power is turned on or the disc is replaced, select
the subtitle language again.
If the subtitle language is not necessary, press [S.T.ON/OFF]
to select “
Off”.
Please refer to “Setting Language" on page E32.
Selecting Audio Soundtrack Language
(Multi-Language) [DVD]
This operation works only with discs on which multiple audio
soundtrack languages are recorded.
Hello!
Holà!
¡Hola!
1. Press [AUDIO] while holding [SHIFT] down during playback.
2. Press [AUDIO] repeatedly while holding [SHIFT] down until
the desired language appears on the TV screen.
Examples:
AUDIO
1/4 fr
French
1, 2
SHIFT
1/3 DTS
Notes:
•
•
•
When the desired language is not selected even if the button
is pressed, the language is not available on the disc.
When the power is turned on or the disc is replaced, select
the language again.
If the language is not recorded on the disc, only the available
language on the disc will be heard.
DTS sound
(If you use a DVD video disc with DTS, “DTS” appears. You
can see the picture on the TV screen, but there is no sound.)
Download from Www.Somanuals.-cEom2.4A-ll Manuals Search And Download.
For improvement, on-screen displays subject to change
without notice.
Selecting On-Screen Information
Press [ON SCREEN] repeatedly to show the disc information
(Title, Chapter, Title elapsed playing time, Language, etc.).
Example for DVD:
Example for Audio CD:
1. Press [ON SCREEN] during playback.
1. Press [ON SCREEN].
Chapter remaining playing time
Title elapsed playing time
Track elapsed playing time
02:29
00:08:20 00:01:45
2. Press [ON SCREEN] again.
Track elapsed playing time
2. Press [ON SCREEN] again.
CD
Track 2/22
02:29
Chapter remaining playing time
Title elapsed playing time
Track number
Chapter number
Title number
3. Press [ON SCREEN] to close the disc information.
DVD
Title 1/2
Audio
00:08:40 00:00:23
Chapter 3/35 1/3
1/4 Dolby D 5.1 Ch en
2/3 fr
Subtitle
ON SCREEN
Camera angle
A kind of audio
Audio language
Subtitle language
3. Press [ON SCREEN] to close the disc information.
Selecting Picture Mode
Press [PICTURE MODE] to show the picture mode.
Each time the button is pressed, the picture mode changes as
follows:
Standard x Mild x Black and White x Standard ...
PICTURE
MODE
Important Note:
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom2.5A-ll Manuals Search And Download.
TVGuardian® OPERATION
Before Setting
In this instruction manual, the language in on-screen display
is English. If you change the language (see page E32),
please follow the selected language in on-screen display.
•
•
Initial setting is “CC2” on this unit.
Please set “CC2” or “C2” (Closed caption on channel 2) on
your TV first. For more details, please refer to your TV
instruction manual.
•
When “TVG Mode” is set, the subtitle language may not
appear.
16
Setting TVGuardian®
Example:
To set “TV Mode Strict”, “TVG CC On” and “TVG CC Ch
CC2”
SETUP
1, 17
4
16
1. Press [SETUP] in the stop mode.
The setup screen appears.
a
2
ENTER
2. Press [a] to select “Parental”.
3, 5, 7, 9, 11,
5
13, 15, 16
3. Press [ENTER].
4, 6, 8, 10,
12, 14
“Parental” screen appears.
4. Press [p] to select “TVG Mode”.
11. Press [ENTER].
Note:
“TVG CC On” remains.
If the parental lock “
” is set, the highlighted box does not
move. You must enter the password to release the
parental lock first. See page E34.
12. Press [p] to select “TVG CC Ch (Output Channel)”.
13. Press [ENTER].
5. Press [ENTER].
The submenu (“CC1” and “CC2”) appears.
The submenu (“Off”, “Moderate” and “Strict”) appears.
14. Press [p] to select “CC2”.
6. Press [p] to select “Strict”.
Password
Level
TVG Mode
TVG CC
TVG CC Ch
----
Off
Strict
On
Password
Level
TVG Mode
TVG CC
TVG CC Ch
----
Off
Off
Off
CC2
Off
Moderate
Strict
CC1
CC2
CC2
Note:
Note:
If “TVG Mode” is not necessary, select “Off”.
This is channel number setting for your TV. For more
details, please refer to your TV instruction manual.
7. Press [ENTER].
“TVG Mode Strict” remains.
15. Press [ENTER].
“TVG CC Ch CC2” remains.
8. Press [p] to select “TVG CC (Closed Caption)”.
16. After step 15, you must set the parental lock as shown
9. Press [ENTER].
below.
The submenu (“Off”, “CUSS” and “On”) appears.
(For more details, please refer to “Setting Parental” on page
E34.)
1) Press [o] to select “Level”.
2) Press [ENTER] repeatedly to select the parental lock
level.
3) Press [o] to select “Password ----”.
4) Enter a number in 4 digits.
5) Press [ENTER].
10. Press [p] to select “On”.
Password
Level
TVG Mode
TVG CC
TVG CC Ch
----
Off
Strict
Off
Off
CUSS
On
CC2
“
” appears.
Note:
If you do not set it, the TVGuardian does not work, and
it returns to the initial settings.
Note:
If “TVG CC Off” is selected, closed caption may not appear
17. Press [SETUP].
at CC2 mode on your TV screen.
The setup screen disappears.
Download from Www.Somanuals.-cEom2.6A-ll Manuals Search And Download.
How It Works After Setting TVGuardian®:
IMPORTANT INFORMATION:
•
Use a TV with closed caption capability and set the function
When a disc supporting closed caption is played, it mutes the
entire phrase instead of just the swear word and displays the
modified text, by design. It turns the sound back on when the
phrase is completed.
to “On”.
•
•
Set the same channel number on your TV as above.
The built-in TVGuardian® Foul Language Filter (TVG®) works
only English language DVD video disc supporting closed
caption, not any other languages.
Examples:
•
For improvement, on-screen displays subject to change
without notice.
The phrase “Get the hell out.”, is muted and “Get Out.”, is
displayed.
The phrase “Move you’re a—!”, is muted and “Move your tail!”, is
displayed.
Setting TVGuardian
Operation (TV: CC2 or C2)
Closed Caption
TVG Mode TVG CC
TVG CC Ch
CC2
Sound
_______
Off
Original sound
No display
Moderate
Off
CC2
Mute the swear word
Mute the swear word
Mute the swear word
Mute the swear word
Mute the swear word
Mute the swear word
No display
CUSS
On
CC2
Display the modified text only
Display all text with the modified text
No display
CC2
Strict
Off
CC2
CUSS
On
CC2
Display the modified text only
Display all text with the modified text
CC2
Setting TVGuardian
Operation (TV: CC1 or C1)
TVG Mode TVG CC
TVG CC Ch
CC2
Sound
Closed Caption
Original text
No display
No display
No display
No display
No display
No display
_______
Off
Original sound
Moderate
Off
CC2
Mute the swear word
Mute the swear word
Mute the swear word
Mute the swear word
Mute the swear word
Mute the swear word
CUSS
On
CC2
CC2
Strict
Off
CC2
CUSS
On
CC2
CC2
Notes:
•
•
If you want to see the original closed caption, set “TVG Mode”
to “Off”.
If you want to see the closed caption when “Moderate” and
“Strict” are set, set the TV’s closed caption channel the same
as TVG CC Ch’s number (“CC2” or “CC1”).
•
Foul word that are normally filtered are missed when closed-
captioning errors exist (i.e. a foul word is not captioned,
misspelled or is not synchronized with the spoken word.)
The built-in Foul Language Filter may not work on some discs
depending on recording conditions.
•
•
DVD video discs may or may not respond to the TVG Mode
settings. Make sure this function works with your DVD video
discs.
TVGuardian® and TVG® are registered trademarks of Principle
Solutions, Inc.
•
When playback starts, the TVG information may appear on
the TV screen.
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom2.7A-ll Manuals Search And Download.
MP3/WMA CD OPERATION
Before Starting
This unit can play back the CD that has recorded music data,
MP3 or WMA (Windows Media Audio) files.
MP3/WMA CD Playback
•
•
The file system is ISO9660 Level 1 and Level 2.
If the CD has both audio CD tracks and MP3/WMA files, only
audio CD tracks are played.
•
•
It would take 30 seconds or more for this unit to read MP3/
WMA files depending on its structure.
This unit can recognize up to 256 files or folders per disc. The
CD with 257 files or folders and over is not available to this
unit.
2
1, 3
•
MP3/WMA CDs may not be played in the recorded order.
1. Please use the MP3 or WMA software with the function
that can record data alphabetically or numerically.
2. Please refrain from making many sub-folders by
preference.
1, 3
However, some CD-R/RWs cannot be played back depending
on the recording conditions.
1. Press [q] (or [OPEN/CLOSE] on the remote control).
•
“OPEN” appears on the FL display, and the disc tray
Before playing back MP3 or WMA files, please read the following.
opens.
Note:
MP3 CD
To open or close the disc tray, be sure to press [q] (or
[OPEN/CLOSE] on the remote control). Do not press the disc
tray with your hand.
•
•
MP3 files must have the extension letters, “.MP3” or “.mp3”.
Standard, sampling frequency, and the bit rate:
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
2. Place the disc with the label facing up on the disc tray.
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is
44.1kHz of sampling frequency and 128kbps of constant bit
rate.
•
WMA CD
3. Press [q] (or [OPEN/CLOSE] on the remote control).
•
When creating a WMA disc, be sure the copyright function is
•
•
•
The disc tray closes.
off.
“FILE” appears on the FL display.
A table of contents in the first directory appears on the TV
screen.
•
•
WMA files must have the extension letters, “.WMA” or “.wma”.
Standard, sampling frequency, and the bit rate:
WMA version 7, and 8
Example:
32kHz, 48kbps ~ 64kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
File
1/24
00:00:00
•
DRM files cannot be played back.
HYPER-EURO-MAX
Microsoft, Windows Media, and Windows Logo are trademarks
or registered trademarks of Microsoft Corporation in both the
United States and other countries.
1
2
3
4
5
6
7
MUSIC001
MUSIC002
MUSIC003
MUSIC004
MUSIC005
MUSIC006
MUSIC007
8
9
10
11
12
MUSIC008
MUSIC009
MUSIC010
MUSIC011
MUSIC012
LIMITATIONS ON DISPLAY
•
Available letters for display are the following: capital or small
alphabets of A through Z, and numbers of 0 through 9.
Other letters than those above are replaced in “-” (hyphen).
•
File: MAX
CAUTION:
•
Some MP3/WMA CDs cannot be played back depending on
File information
the recording conditions.
The CD has no music data or non-MP3/WMA files cannot be
played back.
Note:
•
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, “No Play” appears on the TV screen.
If this occurs, load the disc correctly or replace the disc.
Download from Www.Somanuals.-cEom2.8A-ll Manuals Search And Download.
Stopping Playback
Press [n] during playback. “n” appears briefly on the TV screen
and playback stops completely.
RETURN
Pause
Press [k] during playback.
•
•
“k” appears briefly on the TV screen.
“k” appears on the FL display.
Note:
The sound is muted.
Press [a] to return to normal playback.
MENU
5
4
File Skip
Skipping forward
Press [e] during playback to skip to the next file.
“e” appears briefly on the TV screen.
a(Play)
Skipping backward
Press [f] during playback to skip back to the beginning of the
file currently play.
4. Press [o], [a], [p] or [b] to move the highlighted box to the
desired file.
“f” appears briefly on the TV screen.
Press the button again immediately to skip back to the beginning
of the previous file.
•
To go on to the next or previous directory, press [o], [a],
[p] or [b].
To go back to the previous directory, press [RETURN].
In some discs, if [MENU] is pressed, it goes back to the
first directory.
•
•
5. Press [ENTER] (or [a]) to start playback.
•
•
•
“a” appears briefly on the TV screen.
The letter’s color in the highlighted box turns green.
“MP3” or “WMA” appears on the FL display.
a(Play)
k
n(Stop)
Example: (the second directory)
e
f
Current file elapsed playing time
Total file number
Current file number
REPEAT
Repeat Playback
Press [REPEAT] during playback.
File
13/24 00:00:08
Each time the button is pressed, the repeat mode will be changed
MAX2
as follows:
13
14
15
16
17
18
19
MUSIC013
MUSIC014
MUSIC015
MUSIC016
MUSIC017
MUSIC018
MUSIC019
20
21
22
23
24
MUSIC020
MUSIC021
MUSIC022
MUSIC023
MUSIC024
TV screen
FL display
REP.1
Operation
1
Repeat of file being played
Repeat all files
All
Off
ALL REP.
Normal playback mode
Note:
Repeat playback may not work correctly with some discs.
Song: MUSIC013
Important Note:
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom2.9A-ll Manuals Search And Download.
PICTURE DISC OPERATION
2. Press [o], [a], [p] or [b] to move the cursor to the desired
picture.
To go to the next or previous thumbnail pictures, press
[e] or [f].
KODAK Picture CD Playback
With KODAK Picture CD, it’s easy to turn film into pictures you
can email from your PC and view on this unit!
•
Just bring your film in for processing, and check the box for
KODAK Picture CD. You’ll get back your prints and negatives as
usual - plus you’ll get a special CD that contains your pictures
along with software that lets you view, enhance, share, and print
your pictures from your computer and view them on this unit.
3. Press [ENTER] (or [a]) to start the slide show from the
selected picture.
•
If you press [k] during the slide show, the slide show
stops temporary. “k" appears briefly.
Press [a] (or [k]) again to resume the slide show.
If the picture appears upside down or sideways, please
do the following steps.
•
1) Press [k], if necessary.
2) Press [ANGLE] repeatedly while holding [SHIFT] down
until it’s right side up.
ANGLE
SHIFT
“
”, “
”, “
” or “Normal” appears briefly
on the TV screen.
3) Press [a] (or [k]) to skip to the next picture and
continue the slide show.
•
If you press [e] or [f] during the slide show, it skips
to the next picture or previous picture.
o, a, p, b
MENU
After the last picture has displayed, the last thumbnail pictures
appear.
ENTER
TOP MENU
k
•
To stop the slide show, press [n]. The thumbnail pictures
appear.
n (Stop)
a
(Play)
•
If [TOP MENU] is pressed during the slide show, the
thumbnail pictures appear.
e
f
Notes:
•
If you press [MENU], the file list appears.
Example:
1. Load the disc with the label facing up on the disc tray.
(Please refer to “MP3/WMA CD OPERATION” on page E28.)
•
•
•
“PHOTO” appears on the FL display.
“Picture CD” appears briefly on the TV screen.
The first thumbnail pictures (maximum 9-picture) appear
on the TV screen.
Picture CD
PICTURES
-/37 00:00:00
Example:
1
2
3
4
5
6
7
001-1A
002-2A
003-3A
004-4A
005-5A
006-6A
007-7A
8
9
008-8A
009-9A
10
11
12
13
14
010-10A
011-11A
012-12A
013-13A
014-14A
File: 001-1A
•
If you start the slide show from the file list...
1) Press [o], [a], [p] or [b] to move the highlighted box to the
desired file.
2) Press [ENTER] (or [a]) to start the slide show.
The file list appears after the last picture has displayed.
If you press [TOP MENU], the thumbnail pictures appear.
FUJICOLOR CD can be used.
Some discs cannot be played back depending on the recording
conditions.
•
•
•
KODAK and Picture CD are registered trademarks of Eastman
Kodak Company.
Download from Www.Somanuals.-cEom3.0A-ll Manuals Search And Download.
JPEG CD Playback
You can also view digital images from JPEG files on disc created
by your computer.
Picture Zoom
1. Press [k] at the desired picture (KODAK Picture CD and
JPEG CD).
•
It would take 30 seconds or more for this unit to read the
JPEG files depending on its structure.
2. Press [ZOOM] while holding [SHIFT] down.
The pin point guide appears on the TV screen.
•
Some JPEG files cannot be played back depending on the
recording conditions.
3. Press [o], [a], [p], [b] and [ENTER] (or number buttons).
The picture is magnified.
1. Load the disc with the label facing up on the disc tray.
(Please refer to “MP3/WMA CD OPERATION” on page E28.)
(For more details, please refer to “Picture Zoom” on page
E21.)
•
•
“FILE” appears on the FL display.
The file list appears on the TV screen.
Example:
4. Press [a] to resume the slide show.
File
1/43 00:00:00
Root
If the disc is mixed with MP3, WMA and JPEG files…
1. Press [o], [a], [p] or [b] to move the highlighted box to the
desired file.
1
2
3
4
5
6
7
001
002
003
004
005
006
007
8
9
008
009
010
011
012
013
014
2. Press [ENTER] (or [a]) to start playback (or slide show).
10
11
12
13
14
•
If you start from the MP3 or WMA file, the unit plays both
MP3 and WMA files. But the unit skips the JPEG files
automatically.
•
If you start from the JPEG file, the unit plays the JPEG
files. But the unit skips both MP3 and WMA files
automatically.
File: 001
2. Press [o], [a], [p] or [b] to move the highlighted box to the
desired file.
3. Press [ENTER] (or [a]) to start the slide show from the
selected file.
•
•
“PHOTO” appears on the FL display.
If you press [k] during the slide show, the slide show
stops temporary. “k" appears briefly.
Press [a] (or [k]) again to resume the slide show.
If the picture appears upside down or sideways, please
do the following steps.
•
1) Press [k], if necessary.
2) Press [ANGLE] repeatedly while holding [SHIFT] down
until it’s right side up.
“
”, “
”, “
” or “Normal” appears briefly
on the TV screen.
3) Press [a] (or [k]) to skip to the next picture and
continue the slide show.
•
If you press [e] or [f] during the slide show, it skips
to the next file or previous file.
After the last file has displayed, the file list appears.
Notes:
•
•
To stop the slide show, press [n]. The file list appears.
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, “No Play” appears on the TV screen.
If this occurs, load the disc correctly or replace the disc.
Important Note:
“
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Need help? Call
1-800-813-3435
Download from Www.Somanuals.-cEom3.1A-ll Manuals Search And Download.
INITIAL SETTINGS
Once the initial settings have been completed, the unit can
Setting Display
1. Press [SETUP] in the stop mode.
The setup screen appears.
always be operated under the same conditions.
The settings will be retained in the memory until they are changed,
even if the power is turned off.
2. Press [a] to select “Display”.
Notes:
•
In this instruction manual, the language in on-screen
display is English.
If you change the language, please follow the selected
language in on-screen display.
You cannot switch audio sound track languages if there is
only one language recorded on the disc.
When you play back a DVD video disc, the unit automatically
displays the pre-selected subtitle language if it is included on
the disc.
3. Press [ENTER].
“Display” screen appears.
4. Press [ENTER].
•
•
The submenu (“4:3 LB”, “4:3 PS” and “16:9”) appears.
5. Press [p] or [o] to select the appropriate setting for your TV
screen size.
Example: To select “4:3 PS”
•
For improvement, on-screen displays subject to change
without notice.
Language
TV Type
Display
Audio
Parental
Setting Language
1. Press [SETUP] in the stop mode.
The setup screen appears.
“Language” is highlighted.
4:3 LB
4:3 LB
4:3 PS
16:9
2. Press [ENTER].
“Language” screen appears.
6. Press [ENTER].
(In this example, “TV Type 4:3 PS” remains.)
3. Press [p] or [o] to select the item (highlighted).
Example:
7. Press [o] to skip back to the setup screen (or press [SETUP]).
Language
Display
Audio
Parental
4:3 LB (Letterbox):
Select when a conventional TV set is
connected.
When the wide screen disc is played
back, the black bands appear at the
top and bottom of screen.
OSD
Audio
Subtitle
DVD Menu
English
Disc
Disc
Disc
4:3 PS (Panscan):
Select when a conventional TV set is
connected.
When the wide screen disc is played
back, it displays pictures cropped to
fill to your TV screen. The left and
4. Press [ENTER].
The submenu appears.
Example:
Language
Display
Audio
Parental
English
Cut off
Cut off
right edges are cut off.
OSD
Audio
Subtitle
DVD Menu
English
Disc
Disc
Español
Français
Deutsch
16:9 :
Select when a wide screen TV set is
connected.
Played in “FULL” size. (Setting the
wide screen TV to “FULL” mode is
also necessary.)
Disc
Portugues
5. Press [p] or [o] to select the language (highlighted).
Notes:
6. Press [ENTER].
•
The screen size may differ depending on the DVD video
discs.
The selected language remains.
•
If you select 16:9 to get rid of the black bands on screen
when wide screen disc is played back, picture may be
slightly distorted.
In some discs, even if 4:3 PS is selected, the black bands
may remain on the screen.
7. Repeat steps 3 ~ 6 for other items.
Note:
If “Others” is selected, enter the language code. (See
“Language Code List” on page E35.)
•
8. Press [o] to skip back to the setup screen (or press [SETUP]).
Download from Www.Somanuals.-cEom3.2A-ll Manuals Search And Download.
Setting Audio
The sound from speakers can reach the listening position at
different times depending the speaker placements. You can
allow for this difference by changing the delay time of the center
and surround speakers.
You also can change the Dynamic Range Control (DRC).
1. Press [SETUP] in the stop mode.
The setup screen appears.
2. Press [a] to select “Audio”.
3. Press [ENTER].
“Audio” screen appears.
SETUP
1, 15
4
Audio DRC
Center Delay
Surr. Delay
Off
0ms
5ms
5, 9, 13, 15
a
ENTER
2
3, 4, 6, 8,
10, 12, 14
5
4. Press [ENTER] to select “Audio DRC”.
5, 7, 9, 11,
13
The submenu (“On” and “Off”) appears.
5. Press [p] or [o] to select “On” or “Off” as desired.
On: It will compress the dynamic range. It may have no
effect with some discs.
Off: Sound with a wide dynamic range.
6. Press [ENTER].
“Audio DRC On” or “Audio DRC Off” remains.
7. Press [p] to select “Center Delay”.
10. Press [ENTER].
“Center Delay” and the selected delay time remain.
8. Press [ENTER].
The submenu (“0ms”, “1ms”, “2ms”, “3ms”, “4ms” and “5ms”)
11. Press [p] to select “Surr. Delay”.
appears.
12. Press [ENTER].
9. Press [p] or [o] to select the center speaker delay time.
The submenu (“0ms”, “5ms”, “10ms” and “15ms”) appears.
Center speaker delay time
13. Press [p] or [o] to select the surround speaker delay time.
If D1 D2, set the delay time to “0ms”.
Surround speaker delay time
If D1 D3, set the delay time to “0ms”.
If D1>D2, set the delay time as follows:
Difference between D1 and D2
1 foot (Approx. 30.5cm)
2 feet (Approx. 61cm)
Delay time
1ms
2ms
If D1>D3, set the delay time as follows:
Difference between D1 and D3
5 feet (Approx. 152.5cm)
10 feet (Approx. 305cm)
15 feet (Approx. 457.5cm)
Delay time
5ms
10ms
3 feet (Approx. 91.5cm)
4 feet (Approx. 122cm)
5 feet (Approx. 152.5cm)
3ms
4ms
5ms
15ms
14. Press [ENTER].
Center speaker
“Surr. Delay” and the selected delay time remain.
Front left speaker
Front right speaker
15. Press [o] to skip back to the setup screen (or press [SETUP]).
D2
D1
D1
D3
D3
Surround left
speaker
Surround right
speaker
Need help? Call
1-800-813-3435
D1: The distance from the front speaker
D2: The distance from the center speaker
D3: The distance from the surround speaker
Download from Www.Somanuals.-cEom3.3A-ll Manuals Search And Download.
Setting Parental
7
Note:
CLEAR
If you set “TVG Mode”, “TVG CC” or “TVG CC Ch”, set them
first before steps 6 and 7. See “Setting TVGuardian®” on
page E26.
1. Press [SETUP] in the stop mode.
The setup screen appears.
6
2
4
2. Press [a] to select “Parental”.
1, 9
3. Press [ENTER].
3, 5, 8
“Parental” screen appears.
8. Press [ENTER].
Language
Display
Audio
Parental
The password is now set.
----
1
Password
Level
Password
Level
----
Off
TVG Mode
TVG CC
TVG CC Ch
Off
Off
CC2
TVG Mode
TVG CC
TVG CC Ch
Off
Off
CC2
Note:
4. Press [p] to skip “Password ----” and select “Level”.
If you do not set it, Parental Control does not work, and it
returns to the initial settings.
Password
Level
TVG Mode
TVG CC
TVG CC Ch
----
Off
Off
Off
CC2
9. Press [SETUP].
The setup screen disappears.
Parental Control
5. Press [ENTER] repeatedly to select the parental lock level
(“Level Off” ~ “Level 8”).
MPAA (Motion Picture Association of America) Guideline is a
rating system that provides advanced cautionary information to
parent about the content of movie programs.
Example: To select “Level 1”
Password
Level
----
1
The parental lock level is equivalent to the following MPAA
Rating System.
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
Level 4: PG-13 (Parents strongly cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)
TVG Mode
TVG CC
TVG CC Ch
Off
Off
CC2
6. Press [o] to return to “Password ----”.
Some DVD discs contain a restriction level which enables
parents to prevent playback of discs by children. This unit is
equipped with a password designed to prevent children changing
the level.
7. Enter a number in 4 digits.
Password
1
Level
You cannot play DVD video discs rated higher than the level
you selected unless you cancel the parental lock function.
For example, when you select level “5”, the unit will not play
discs with ratings of “6”, “7” or “8”.
Off
Off
CC2
TVG Mode
TVG CC
TVG CC Ch
The information will appear on the TV screen.
Note:
If you make a mistake, press [CLEAR].
If you forget the password…
Enter “788444” even if 4 digits “----” appears, then press [ENTER]
to clear the current password.
Enter a new password and set the parental lock level again.
Note:
DVD video discs may or may not respond to the parental lock
settings. Make sure this function works with your DVD video
discs.
Download from Www.Somanuals.-cEom3.4A-ll Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and “DVD Menu” on page E32.
Code Abbreviation
of the
Language
Code Abbreviation
of the
Language
Code Abbreviation
of the
Language
language
language
language
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
Afar
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
ie
ik
in
is
it
iw
ja
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
rn
ro
ru
rw
sa
sd
sg
sh
si
Kirundi
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangro
Serbo-Croatian
Singhalese
Slovak
ji
jw
ka
kk
kl
km
kn
ko
ks
ku
ky
la
sk
sl
Slovenian
Samoan
Shona
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
te
tg
th
ti
tk
tl
tn
to
bn
bo
br
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
eu
fa
fi
fj
fo
Welsh
Danish
German
Bhutani
Greek
ln
lo
lt
lv
Telugu
Tajik
Thai
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faeroese
French
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
tr
ts
tt
fr
fy
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Twi
Ukrainian
Urdu
Frisian
Irish
ga
gd
gl
gn
gu
ha
hi
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Hindi
Polish
Yoruba
Chinese
Zulu
hr
Croatian
Hungarian
Armenian
Interlingua
ps
pt
qu
rm
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
hu
hy
ia
Download from Www.Somanuals.-cEom3.5A-ll Manuals Search And Download.
ENJOYING VIDEO SOURCES
1. Press [FUNCTION] to select “VIDEO 1” or “VIDEO 2”.
2. Follow the instructions supplied with TV or other compatible/
video component.
LISTENING TO THE RADIO
To turn the unit on and listen to the last received station, press
[TUNE/BAND] on the remote control.
Automatic/Manual Tuning
1. Press [TUNE/BAND] to select FM or AM.
1
2. Automatic tuning
Press [TUNE +] or [- TUNE] for at least 1 second to tune in a
station. The unit will scan up or down the band and receive
the next receivable station. Press the button again to continue.
Manual tuning
Press [TUNE +] or [- TUNE] briefly until the desired frequency
is displayed. The frequency changes in 200 kHz steps for FM
and 10 kHz steps for AM.
2
Example:
ST
To Preset Stations
Up to 24 FM and 12 AM stations can be preset.
Automatic presetting (APT)
1. Press [TUNE/BAND] to select FM or AM.
2
2. Press [PROGRAM/RANDOM] for at least 3 seconds.
“PGM” blinks.
The automatic tuning mode is set and automatic presetting
begins from the low end of the band.
When 24 FM or 12 AM stations have been preset or the high
end of the band is reached, automatic presetting stops.
“PGM” disappears and the station memorized on channel 1
will be heard.
1
3. To preset stations on the other band, follow steps above.
Note:
To receive FM stereo broadcasts
If APT is activated, all previously programmed stations of the
band will be cleared and new stations will be programmed.
Make sure that “MONO” is not displayed. If “MONO” appears,
press [FM MODE] to turn the “MONO” indication off.
“ST” appears when an FM stereo broadcast is received.
•
If the signal from an FM stereo station is weak and reception
is poor, press [FM MODE] to change to monaural reception.
The reception may be improved, but the sound will be
monaural.
Need help? Call
1-800-813-3435
FM MODE
Download from Www.Somanuals.-cEom3.6A-ll Manuals Search And Download.
Manual presetting
1. Tune in the station to be preset as described in “Automatic/
Manual Tuning”.
2
2. Press [PROGRAM/RANDOM].
Number
buttons
“PGM” blinks.
PGM
ST
3. While “PGM” is blinking, press [PRESET +] or [- PRESET] to
select the channel to be preset.
•
The number buttons on the remote control can also be
used.
•
In this example, the channel is “9”.
4
PGM
ST
4. While “PGM” is blinking, press [ENTER].
•
In this example, “103.1 MHz” FM station is preset on FM
channel 9.
3
PGM
ST
ST
5. Repeat steps above to add more preset stations.
Number
buttons
•
When presetting a new station, the previous preset station is
cleared.
1
Listening to Preset Stations
Preset tuning
1. Press [TUNE/BAND] to select FM or AM.
2. Press [PRESET +] or [- PRESET] briefly to select the desired
channel.
Enter
2
•
If using the number buttons, press the number button(s),
then press [ENTER].
Preset scan tuning
1. Press [TUNE/BAND] to select FM or AM.
2. Press [PRESET +] for at least 1 second.
•
•
The channel number appears.
The preset stations are selected in sequence for
approximately five seconds each.
Changing the reception frequencies
It is not necessary to perform this procedure in the U.S. and
Canada.
1. Select the band to be changed.
2. While holding [n] down on the front panel, press [PROGRAM/
RANDOM] on the remote control.
3. Press [PRESET +] when the desired station has been
selected. Preset scanning will stop.
To return the original setting, repeat steps above.
AM: 520 ~ 1710 kHz (10 kHz steps)
522 ~ 1710 kHz (9 kHz steps)
When beat interference is heard
A high-pitched noise called “beat” is sometimes heard during
reception of radio broadcasts.
FM: 87.9 ~ 107.9 MHz (200 kHz steps)
If this occurs, while holding [n] down on the front panel, press
[TEST] on the remote control to select “bc-A” or “bc-B”. Select
the setting that gives the best results.
87.5 ~ 108.0 MHz (50 kHz steps)
Download from Www.Somanuals.-cEom3.7A-ll Manuals Search And Download.
SLEEP TIMER OPERATION
The sleep timer automatically switches off the power after a
preset time has elapsed. The volume will gradually be reduced
(fade-out) during the 1 minute period before the unit turns off.
There are 4 time periods available: 30, 60, 90, and 120 minutes.
Press [SLEEP] repeatedly while holding [SHIFT] down to select
the desired sleep time. “SLEEP” and the selected time blink on
the FL display.
After several seconds, the original display returns and the
brightness of the display reduces. “SLEEP” blinks.
SLEEP
SHIFT
To check the remaining sleep time
Press [SLEEP] once while holding [SHIFT] down. The remaining
time is displayed.
After several seconds, the original display returns.
Need help? Call
1-800-813-3435
To release the sleep timer while in operation
Press [SLEEP] repeatedly while holding [SHIFT] down until
“SLEEPOFF” appears.
The timer is also released if the power is switched off.
MAINTENANCE
Cleaning the cabinet
WARNING:
Use a clean soft cloth moistened with plain lukewarm water and
wrung dry. Never use benzol, benzene or other strong chemical
cleaners since these could damage the finish of your unit. It is
important that no liquid reaches the inside of the unit.
FOR YOUR PERSONAL SAFETY, BE SURE TO
DISCONNECT THE AC POWER CORD BEFORE
PROCEEDING WITH ANY MAINTENANCE OR CLEANING.
Download from Www.Somanuals.-cEom3.8A-ll Manuals Search And Download.
TROUBLESHOOTING GUIDE
If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check
the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
Insert the power plug into the AC wall outlet.
Load a disc.
No power.
No power plug connection at the AC wall outlet.
The power is on, but the player does not No disc is loaded.
work.
No picture.
An unplayable disc is loaded.
Load a playable disc. (Check the disc logo, type,
color system and Regional code.) (See page E15.)
The TV is not set to receive signal from the unit.
The video cable is not connected.
Volume control is set to minimum.
The wrong function is selected.
Select the correct input function on the TV.
Connect the video cable into the jack.
Turn up the volume.
No sound.
Select the correct function.
Connect the speaker wires firmly to the speaker
terminals. (See page E7.)
Faulty speaker connections.
Sound is heard from only one speaker.
The playback picture is poor.
Connect the speaker wires firmly to the speaker
terminals. (See page E7.)
Faulty connection of speaker wires.
An unplayable disc is loaded.
Load a playable disc. (Check the disc logo, type,
color system, and regional code.) (See page E15.)
Part of On-Screen-Display is cut off.
Refer to the instruction manual of your TV.
Incorrect aspect ratio setup on TV.
The feature or action cannot be completed at this
time because:
The selected function does not operate on the
disc now.
“
” appears on the TV screen.
•
•
•
The feature is not available at the moment.
The DVD software restricts it.
The DVD software doesn’t support the feature
(e.g., angles).
Load a disc.
No disc is loaded.
The unit does not start playback.
Load a playable disc. (Check the disc logo, type,
color system, and regional code.) (See page E15.)
An unplayable disc is loaded.
Load the disc on the disc tray correctly.
Clean the disc or replace it.
The disc is loaded with the label side down.
The disc is dirty.
Cancel the parental lock function or change the
rating level. Reset it after play. (See Page E34.)
“Parental” is set.
Press the q button on the unit until “UNLOCKED”
appears on the FL display. (See page E17.)
The disc tray may be locked.
Weak signal.
The disc tray does not open.
Press [FM MODE] on the remote control to select
“MONO”. (See page E36.)
Flickering “ST”.
Reorient the FM antenna lead wire or install an
outdoor FM antenna. (See page E11.)
Check the battery polarity (+ or -).
Replace the batteries. (See page E6.)
The batteries in the remote control are weak, or
installed incorrectly.
The remote control does not work properly.
Aim the remote control at the remote sensor window.
(See page E6.)
The remote control is not aimed at the remote
sensor window.
SERVICING:
Should this product require service, refer to the SANYO AUDIO/VIDEO limited warranty.
If you do not have a convenient SANYO service station nearby, contact the SANYO dealer where you purchased the unit. Be sure to
give the model number and explain the problem. The dealer will advise you how to obtain service.
Download from Www.Somanuals.-cEom3.9A-ll Manuals Search And Download.
SPECIFICATIONS
Amplifier Section
Tuner Section
(FM)
Frequency range:
87.9 MHz ~ 107.9 MHz (200 kHz steps)
Usable sensitivity:
20.2 dBf (mono)
(AM)
Main Amplifier (Stereo mode)
Continuous minimum sine wave RMS power output
per channel into 8 ohms at 1kHz with no more than
10% total harmonic distortion ................. 32 Watts
Frequency range:
520 kHz ~ 1,710 kHz (10 kHz steps)
Usable sensitivity:
Main Amplifier (Dolby Digital mode)
500 µV/m (AM loop antenna)
Continuous minimum sine wave RMS power output
per channel into 8 ohms at 1kHz with no more than
10% total harmonic distortion (with Center/Sur-
round/Subwoofer amplifier off) ................ 32 Watts
General
Power requirements:
AC 120V, 60Hz
Power consumption:
120 Watts
Dimensions (W x H x D):
Approx. 17.1" x 2.6" x 14.9" (435 x 65 x 378 mm)
Weight:
Center Channel Amplifier (Center)
Continuous minimum sine wave RMS power output
into 8 ohms at 1kHz with no more than 10% total
harmonicdistortion(withMain/Surround/Subwoofer
amplifier off) ............................................... 32 Watts
Approx. 12.4 lbs (5.6 kg)
Satelite Speaker
Front left and right, Center, Surround left and right speakers
(DWM-2500S, magnetic shield)
Unit used:
3.1" (8 cm) diameter, Cone type, Full range
Maximum music power handling capacity:
60 Watts
Surround Channel Amplifier (Surround)
Continuous minimum sine wave RMS power output
per channel into 8 ohms at 1kHz with no more than
10% total harmonic distortion (with Main/Center/
Subwoofer amplifier off)............................ 32 Watts
Nominal impedance:
8 Ω
Subwoofer Channel Amplifier (Subwoofer)
Dimensions (W x H x D):
Continuous minimum sine wave RMS power output
into 4 ohms at 100Hz with no more than 10% total
harmonic distortion (with Main/Center/Surround
amplifier off) ............................................... 50 Watts
Approx. 3.7" x 5.7" x 4.4" (94 x 144 x 85 mm)
Weight:
Approx. 1.3 lbs (0.6 kg)/speaker
Inputs:
Subwoofer (DWM-2500W)
Unit used:
5.1" (13 cm) diameter, Cone type
Maximum music power handling capacity:
80 Watts
VIDEO (AUDIO) IN 1: 500 mV/50 kΩ
VIDEO (AUDIO) IN 2: 500 mV/50 kΩ
Outputs:
FRONT SPEAKERS (L/R): 8 Ω
CENTER SPEAKER: 8 Ω
SURROUND SPEAKERS (L/R): 8 Ω
SUBWOOFER: 4 Ω
COMPONENT VIDEO OUT:
Y: 1.0 Vp-p (75 Ω)
Nominal impedance:
4 Ω
Dimensions (W x H x D):
Approx. 6.3" x 15.6" x 12" (160 x 395 x 305 mm)
Weight:
PB: 0.7 Vp-p (75 Ω)
Approx. 10.2 lbs (4.6 kg)
PR: 0.7 Vp-p (75 Ω)
MONITOR OUT S-VIDEO:
Y: 1.0 Vp-p (75 Ω)
C: 0.286 Vp-p (75 Ω)
MONITOR OUT VIDEO: 1.0 Vp-p (75 Ω)
DVD Video Player Section
Type:
DVD Video player
Signal format:
NTSC color
Laser:
Semiconductor laser, wavelength 650 nm/790 nm
Signal to noise ratio:
More than 105 dB
Wow and flutter:
Below measurable level
IMPORTANT INFORMATION
Because its products are subject to continuous improvement, Sanyo reserves the right to modify product designs and specifications
without notice and without incurring any obligation.
Download from Www.Somanuals.-cEom4.0A-ll Manuals Search And Download.
For assistance in obtaining repairs and operational information, please contact the following Toll Free Number:
DIAL TOLL FREE: 1-800-813-3435
Weekdays: 7:30 AM - 4:00 PM Central Time
Also, you may write to SANYO Manufacturing Corporation, 3333 Sanyo Road, Forrest City, Arkansas 72335.
Limited Warranty
LABOR 1 YEAR
PARTS 1 YEAR
CARRY-IN ONLY
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED FROM A WAL-MART STORE AND USED IN THE UNITED
STATES OF AMERICA, EXCLUDING HAWAII AND ALL U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO
THE ORIGINAL RETAIL PURCHASER AND DOES NOT APPLY TO PRODUCTS USED FOR ANY INDUSTRIAL, PROFESSIONAL OR
COMMERCIAL PURPOSE.
Subject to the OBLIGATIONS and EXCLUSIONS below, SANYO Manufacturing Corporation. (“SANYO”) warrants this SANYO product
against defects in materials and workmanship for the periods of LABOR and PARTS specified above. SANYO will repair or replace (at its option)
the product and any of its parts which fail to conform to this warranty with new or refurbished products or parts. The warranty period commences
on the date the product was first purchased at retail from a Wal-Mart Store.
OBLIGATIONS
In order to obtain warranty service, the product must be delivered to and picked up from a Wal-Mart Store at the original retail purchaser’s expense.
The original dated bill of sale, or sales slip from a Wal-Mart Store must be submitted to a Wal-Mart Store at the time warranty service is requested.
EXCLUSIONS
1. This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or
(B) the repair of any product whose serial number has been altered, defaced or removed.
2. This warranty shall not apply to the cabinet or cosmetic parts, broken or damaged video heads, batteries or routine maintenance.
3. This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.
4. This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SANYO including, but not limited to,
any malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to
furnished instructions, shipping or transit accidents, modification or repair by user or any third party, abuse, misuse, neglect, accident, incorrect
line voltage, fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other express warranties and SANYO does not assume or authorize any party to assume for it any other obligation
or liability.
THE DURATION OF ANY WARRANTIES WHICH MAY BE IMPLIED BY LAW (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS) IS LIMITED TO THE TERM OF THIS WARRANTY. IN NO EVENT SHALL SANYO OR THE MANUFACTURER OF THE PRODUCT BE
LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OWNERSHIP OR USE OF THIS PRODUCT, OR
FOR ANY DALAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO
YOU.
THIS WARRANTY GIVES YOU SPECIAL LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
R97/10/20 (M)
For your protection in the event of theft or loss of this product, please keep the following information with a sales receipt in a safe place.
Model No.
Serial No.
Date of Purchase
Purchase Price
Where Purchased
SANYO Manufacturing Corporation
SANYO Electric Co., Ltd.
Download from Www.Somanuals.-cEom4.1A-ll Manuals Search And Download.
Printed in China
|