Sanyo DVD Player DVD SL33 User Guide
INSTRUCTION MANUAL  
DVD Video Player  
DVD-SL33  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ON SCREEN  
ZOOM  
SETUP  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
n
a
f
e
z/ON  
q
OPEN/CLOSE  
REMOTE CONTROLLER RB-SL22  
1AD6P1P1928--  
(CA)  
English  
DVD-SL33/CA(English)  
1
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This symbol indicates that dangerous voltage  
constituting a risk of electric shock is present  
within this unit.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
This symbol indicates that there are important  
operating and maintenance instructions in the  
literature accompanying this unit.  
CAUTION: TO PREVENT THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
WARNING: UNAUTHORIZED RECORDING OF COPY-  
RIGHTED MATERIAL MAY VIOLATE APPLICABLE  
COPYRIGHT LAWS. THE MANUFACTURER ASSUMES  
NO RESPONSIBILITY FOR UNAUTHORIZED DUPLICA-  
TION, USE OR OTHER ACTS WHICH INFRINGE UPON  
THE RIGHTS OF COPYRIGHT OWNERS.  
WARNING: TO PREVENT FIRE OR SHOCK  
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO  
RAIN OR MOISTURE.  
THIS CLASS B DIGITALAPPARATUS COMPLIES WITH CA-  
NADIAN ICES-003.  
WARNING!  
•
UNAUTHORIZED RECORDING OF COPYRIGHT MATERIAL MAY VIOLATE APPLICABLE COPYRIGHT LAWS. THE MANUFACTURER  
ASSUMES NO RESPONSIBILITY FOR UNAUTHORIZED DUPLICATION, USE OR OTHER ACTS WHICH INFRINGE UPON THE RIGHTS OF  
COPYRIGHT OWNERS.  
•
•
TO AVOID THE HAZARDS OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.  
THE USE OF CONTROLS OR ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN  
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
•
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.  
-E2-  
DVD-SL33/CA(English)  
3
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read Instructions – All the safety and operating instructions  
should be read before the product is operated.  
10. Ventilation – Slots and openings in the cabinet are provided  
for ventilation and to ensure reliable operation of the product  
and to protect it from overheating, and these openings must not  
be blocked or covered. The openings should never be blocked  
by placing the product on a bed, sofa, rug, or other similar surface.  
This product should not be placed in a built-in installation such  
as a bookcase or rack unless proper ventilation is provided or  
the manufacturer's instructions have been adhered to.  
2. Retain Instructions – The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings – All warnings on the product and in the  
operating instructions should be adhered to.  
4. Follow Instructions – All operating and use instructions  
should be followed.  
11. Power Sources – This product should be operated only from  
the type of power source indicated on the marking label. If you  
are not sure of the type of power supply to your home, consult  
your product dealer or local power company. For products in-  
tended to operate from battery power, or other sources, refer to  
the operating instructions.  
5. Cleaning – Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
6. Attachments – Do not use attachments not recommended  
by the product manufacturer as they may cause hazards.  
12. Grounding or Polarization – This product may be equipped  
with a polarized alternating-current line plug (a plug having one  
blade wider than the other). This plug will fit into the power outlet  
only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact your electrician to replace your ob-  
solete outlet. Do not defeat the safety purpose of the polarized  
plug.  
7. Water and Moisture – Do not use this product near water –  
for example, near a bath tub, wash bowl, kitchen sink, or laundry  
tub; in a wet basement; or near a swimming pool; and the like.  
8. Accessories – Do not place this product on an unstable cart,  
stand, tripod, bracket, or table. The product may fall, causing  
serious injury to a child or adult, and serious damage to the  
product. Use only with a cart, stand, tripod bracket, or table rec-  
ommended by the manufacturer, or sold with the product. Any  
mounting of the product should follow the manufacturer’s  
instructions, and should use a mounting accessory recommended  
by the manufacturer.  
13. Power-Cord Protection – Power-supply cords should be  
routed so that are not likely to be walked on or pinched by items  
placed upon or against them, playing particular attention to cords  
at plugs, convenience receptacles, and the point where they exit  
from the product.  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
14. Lightning – For added protection for this product during a  
lightning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect the  
antenna or cable system. This will prevent damage to the prod-  
uct due to lightning and power-line surges.  
9. A product and cart combination should  
be moved with care. Quick stops, excessive  
force, and uneven surfaces may cause the  
product and cart combination to overturn.  
S3125A  
(Figure 1)  
-E3-  
DVD-SL33/CA(English)  
4
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. OutdoorAntenna Grounding – If an outside antenna or cable  
system is connected to the product, be sure the antenna or cable  
system is grounded so as to provide some protection against  
voltage surges and built-up static charges. Article 810 of the  
National Electrical Code, ANSI/NFPA 70, provides information  
with regard to proper grounding of the mast and supporting  
structure, grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna-discharge  
unit, connection to grounding electrodes, and requirements for  
the grounding electrode. See Figure 2.  
18. Object and Liquid Entry – Never push objects of any kind  
into this product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or elec-  
tric shock. Never spill liquid of any kind on the product.  
19. Servicing – Do not attempt to service this product yourself  
as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service  
personnel.  
20. Damage Requiring Service – Unplug this product from the  
wall outlet and refer servicing to qualified service personnel un-  
der the following conditions:  
EXAMPLE OFANTENNA GROUNDINGAS PER NATIONAL ELEC-  
TRICAL CODE, ANSI/NFPA 70  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper ad-  
justment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the product to its normal operation.  
ANTENNA  
LEAD IN  
GROUND  
WIRE  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
GROUNDING  
CONDUCTORS  
(NEC SECTION 810-21)  
SERVICE  
EQUIPMENT  
GROUND CLAMPS  
e. If the product has been dropped or damaged in any way.  
f. When the product exhibits a distinct change in perfor-  
mance – this indicates a need for service.  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
21. Replacement Parts – When replacement parts are required,  
be sure the service technician has used replacement parts speci-  
fied by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, elec-  
tric shock, or other hazards.  
NEC – NATIONAL ELECTRICAL CODE  
(Figure 2)  
S2898A  
16. Power Lines – An outside antenna system should not be  
located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system, extreme  
care should be taken to keep from touching such power lines or  
circuits as contact with them might be fatal.  
22. Safety Check – Upon completion of any service or repairs  
to this product, ask the service technician to perform safety checks  
to determine that the product is in proper operating condition.  
23. Heat – The product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other prod-  
ucts (including amplifiers) that produce heat.  
17. Overloading – Do not overload wall outlets, extension cords,  
or integral convenience receptacles as this can result in a risk of  
fire or electric shock.  
This appliance shall not be exposed to drippling or splashing  
water and that no object filled with liquid such as vases shall be  
placed on the apparatus.  
ACCESSORIES  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ON SCREEN  
ZOOM  
SETUP  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Wireless remote control  
Audio/Video cable  
PREV  
NEXT  
PLAY  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
REMOTE CONTROLLER RB-SL22  
-E4-  
DVD-SL33/CA(English)  
5
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
Front Panel  
n
a
f
e
z/ON  
q
OPEN/CLOSE  
1
2
3
4
5 6  
7
8
1. Disc tray  
5. Stop button ( n)  
2. Open/Close button ( q)  
3. FL display  
6. Play button ( a)  
7. Skip/Next/Previous buttons ( f, e)  
4. Remote sensor (IR)  
8. Power button (z/ON)  
FL Display  
1 2 3  
4
5
6
7
8
RND  
Digital  
PGM  
REP 1 ALL  
A-B  
CD  
MP3  
k
11  
10  
9
1. DVD indicator ( DVD )  
2. Play indicator ( a)  
3. Pause indicator ( k)  
7. Program indicator (PGM)  
8. Random play indicator (RND)  
9. Message or number indicators  
4. Repeat mode indicators (REP, 1, ALL, A-B)  
5. DTS indicator (dts)  
6. Dolby Digital indicator ( Digital)  
(Title, cheaper, track, playing time or other information)  
10. MP3 indicator (MP3)  
11. CD indicator (CD)  
Rear Panel  
1
2
3
6
5
4
1. Audio output jacks (AUDIO OUT)  
2. Coaxial digital output jack (DIGITAL OUT)  
3. Video output jack (VIDEO OUT)  
4. Component video output jacks (COMPONENT VIDEO OUT)  
5. Video output select switch (VIDEO OUT SELECT)  
6. S-Video output jack (S-VIDEO OUT)  
-E5-  
DVD-SL33/CA(English)  
6
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL  
Controls  
1. Power button (z/ON)  
1
2 3  
2. Last memory button (LAST MEMO)  
3. Picture mode button (PICTURE MODE)  
4. Open/Close button (OPEN/CLOSE)  
5. A-B repeat button (A-B REPEAT)  
6. Repeat button (REPEAT)  
7. Angle replay button (ANGLE REPLAY)  
8. Angle button (ANGLE)  
9. Menu button (MENU)  
10. Enter button (ENT)  
11. Return button (RETURN) (See page E26.)  
12. Directional arrow buttons (4, a, 5, b)  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
4
5
7
9
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
6
8
32  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
31  
29  
27  
26  
SUBTITLE  
CHANGE  
30  
28  
MENU  
4
SUBTITLE  
ON/OFF  
10  
ENT  
b
a
13. Forward slow button (FWD SLOW  
14. Pause/Step button (kPAUSE/STEP)  
15. Skip/Next button (NEXT e)  
16. Play button (aPLAY)  
17. Forward button (FWD c)  
18. Clear button (CLEAR)  
)
AUDIO  
TOP MENU  
RETURN  
5
11  
13  
25  
22  
12  
14  
REV SLOW  
FWD SLOW  
24  
23  
21  
PAUSE/STEP  
PREV  
NEXT  
15  
17  
19. Search mode button (SEARCH MODE)  
20. Number buttons (1-9, 0)  
21. Reverse button (REV d)  
22. Stop button ( n)  
16  
PLAY  
FWD  
CLEAR  
REV  
23. Skip/Previous button (PREV f)  
1
4
7
2
3
6
9
C
18  
19  
24. Reverse slow button (REV SLOW  
25. Top menu button (TOP MENU)  
26. Audio button (AUDIO)  
27. Subtitle On/Off button (SUBTITLE ON/OFF)  
28. Setup button (SETUP)  
)
5
8
0
20  
SEARCH  
MODE  
29. Subtitle change button (SUBTITLE CHANGE)  
30. Zoom button (ZOOM)  
31. On screen display button (ON SCREEN)  
32. Program/Random play button (PROGRAM/RANDOM)  
Inserting batteries  
1
Remote control range  
2
Two “AA” batteries  
Remote sensor  
(not supplied)  
n
a
f
e
z/ON  
q
OPEN/CLOSE  
Within approx. 23 feet (7 meters)  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ON SCREEN  
ZOOM  
SETUP  
ANGLE  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
Note:  
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
Remove the batteries if the remote control is not to be used for a  
month or more. Batteries left in the unit may leak and cause  
damage.  
PAUSE/STEP  
PREV  
NEXT  
PLAY  
REV  
FWD  
CLEAR  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
IMPORTANT NOTE:  
REMOTE CONTROLLER RB-SL22  
SPENT OR DISCHARGED BATTERIES MUST BE RE-  
CYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE  
WITH ALL APPLICABLE LAWS.  
FOR DETAILS INFORMATION, CONTACT YOUR LOCAL  
COUNTY SOLID WASTE AUTHORITY.  
Note:  
This is not multibrand remote control.  
-E6-  
DVD-SL33/CA(English)  
7
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE CONNECTION  
IMPORTANT INFORMATION:  
•
To connect this unit to a TV, TV must have a set of Audio/Video composite input jacks (RCA-type).  
You cannot use an antenna terminal to connect this unit.  
•
•
If your TV has only an antenna terminal, please purchase the TV with Audio/Video input jacks or the RF modulator.  
Do not connect the unit to a VCR directly. The playback picture will be distorted because DVD video discs are copy-  
protected.  
•
Please refer to the instruction manuals for the components that you are connecting (TV, AV amplifier, etc.).  
Choosing a Connection  
Does your TV have “Audio/Video input jacks”?  
Yes  
No x  
x
x
Yes  
See “Connecting to a Conventional TV  
(Example 1)” and “Using RF Modula-  
tor” on pages E8 & E9.  
Do you use an RF Modulator (not supplied)?  
No  
Please purchase the TV with Audio/Video input jacks  
or the RF Modulator.  
x
x
x
x
x
TV Connection  
Do you connect it to a Conventional  
TV?  
See “Connecting to a Conventional TV  
(Example 1)” on page E8.  
x
x
x
Yes  
No  
See “Connecting to a TV with Progres-  
sive-scan Capability (Example 2)” on  
page E10.  
x
x
Do you connect it to a TV with Pro-  
gressive-scan Capability?  
Yes  
x
TV and Amplifier Connection  
x
x
x
x
x
x
x
x
x
x
x
See “Connecting to a Conventional TV  
(Example 1)”on page E8 or “Connect-  
ing to a TV with Progressive-scan  
Capability (Example 2)” on page E10.  
VIDEO Connection  
x
x
AUDIO Connection  
x
x
Do you connect it to an Amplifier  
with Dolby Digital Decoder, DTS  
Decoder or MPEG2 Decoder?  
See “Connecting to an Amplifier with  
Dolby Digital Decoder, DTS Decoder  
or MPEG2 Decoder (Example 4)” on  
page E12.  
Yes  
No  
x
x
Do you connect it to a Digital  
Amplifier?  
See “Connecting to a Digital Amplifier  
(Example 5)” on page E12.  
Yes  
Yes  
No  
x
x
Do you connect it to an Amplifier  
with Dolby Pro Logic Decoder?  
See “Connecting to an Amplifier with  
Dolby Pro Logic Decoder (Example 6)”  
on page E13.  
No  
See “Connecting to an Audio  
System and TV (Example 3)” on  
page E11.  
-E7-  
DVD-SL33/CA(English)  
8
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC CONNECTIONS  
Connecting to a Conventional TV (Example 1)  
Connect the DVD video player to your TV.  
DVD video player  
TV with Audio/Video input jacks  
To AC 120V, 60Hz  
To VIDEO OUT jack  
(Yellow)  
AUDIO  
VIDEO  
INPUT  
1
R-AUDIO-L VIDEO  
To AUDIO OUT jacks  
To audio input jacks  
Audio/Video cable (supplied)  
Notes:  
To video input jack  
(Yellow)  
•
•
Please refer to your TV instruction manual.  
When you connect the DVD video player to your TV, be sure  
to turn off the power and disconnect both units from the wall  
outlet until all the connections have been made.  
If your TV has one audio input jack, connect the AUDIO OUT  
jacks of the DVD video player to a Y-cable adaptor (not  
supplied), then connect it to the TV Audio input. Please con-  
sult your local audio/video dealer.  
Do not connect the DVD video player to a VCR directly. The  
playback picture will be distorted because DVD video discs  
are copy protected.  
•
•
Using the COMPONENT VIDEO OUT jacks  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the component video input jacks, connect  
the DVD video player to these jacks. (The VIDEO OUT or  
S-VIDEO OUT jack connection is not necessary.)  
You can enjoy high quality picture playback.  
2. Set the VIDEO OUT SELECT switch to the COMPONENT  
position.  
Using the S-VIDEO jack  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the S-video input jack, connect the DVD  
video player with the S-video cable (not supplied). (The  
VIDEO OUT jack connection is not necessary.)  
You can enjoy clearer picture playback.  
2. Set the VIDEO OUT SELECT switch to the S-VIDEO  
position.  
3. You also need to connect the left and right audio cables  
(not supplied) to the AUDIO OUT jacks of DVD video player  
and the Audio input jacks of the TV.  
3. You also need to connect the left and right audio cables  
(not supplied) to the AUDIO OUT jacks of DVD video player  
and the Audio input jacks of the TV.  
TV  
4. Set the DVD video player to  
the INTERLACE position.  
See page E15.  
DVD video player  
TV  
COMPONENT VIDEO INPUT  
Y
PB  
P
R
S-VIDEO IN 1  
To S-VIDEO  
OUT jack  
To S-video input jack  
*S-video cable  
(not supplied)  
*Please consult your local audio/video dealer.  
*Component video cable (not supplied)  
-E8-  
DVD-SL33/CA(English)  
9
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using RF Modulator  
If your TV does not have a Video input jack and has an antenna  
terminal only, please purchase the *RF Modulator (not supplied).  
(*Please consult your audio/video dealer.)  
Example: DVD video player, TV and RF Modulator connections  
Audio/Video cable (supplied)  
To AUDIO  
OUT jacks  
To audio input  
jacks  
3
To AC 120V,  
60Hz  
1
TV  
A/V INPUT JACKS  
TO TV  
ANT. IN  
CHANNEL  
VIDEO  
R-AUDIO-L  
3
4
RF Modulator  
4
VHF/UHF  
ANTENNA  
IN  
DVD video player  
2
1. Connect the antenna cable (not supplied) to the ANT. IN  
terminal of the RF Modulator.  
2. Connect the 75-ohm coaxial cable (not supplied) between  
the TO TV terminal of the RF Modulator and the VHF/UHF  
ANTENNA IN terminal of the TV.  
3. Connect the Audio/Video cable (supplied) between the AU-  
DIO OUT and VIDEO OUT jacks of the DVD video player  
and the AUDIO INPUT and VIDEO INPUT jacks of the RF  
Modulator.  
4. Turn on the TV, and set the channel number (CHANNEL3  
or CHANNEL4) on both TV and RF Modulator, whichever  
is not used for regular broadcast in your area.  
Note:  
For more details, please refer to the instruction manual of the  
RF Modulator.  
Example: DVD video player, VCR, TV and RF Modulator connections  
Audio/Video cable (supplied)  
To audio input  
To AUDIO  
OUT jacks  
jacks  
4
1
To AC 120V,  
60Hz  
VHF/UHF  
FROM ANT.  
2
A/V INPUT JACKS  
TO TV  
ANT. IN  
IN  
CHANNEL  
VIDEO  
R-AUDIO-L  
3
4
TO TV  
RF Modulator  
3
4
OUT  
5
CHANNEL  
5
VHF/UHF  
ANTENNA  
IN  
DVD video player  
TV  
3
VCR  
1. Connect the antenna cable (not supplied) to the VHF/UHF  
FROM ANT IN terminal of the VCR.  
2. Connect the 75-ohm coaxial cable (not supplied) between  
the TO TV OUT terminal of the VCR and the ANT. IN termi-  
nal of the RF Modulator.  
3. Connect the 75-ohm coaxial cable (not supplied) between  
the TO TV terminal of the RF Modulator and the VHF/UHF  
ANTENNA IN terminal of the TV.  
4. Connect the Audio/Video cable (supplied) between the AU-  
DIO OUT and VIDEO OUT jacks of the DVD video player  
and the AUDIO INPUT and VIDEO INPUT jacks of the RF  
Modulator.  
5. Turn on the TV, and set the channel number (CHANNEL3  
or CHANNEL4) on all TV, VCR and RF Modulator, which-  
ever is not used for regular broadcasts in your area.  
Note:  
For more details, please refer to the instruction manual of the  
RF Modulator.  
-E9-  
DVD-SL33/CA(English)  
10  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a TV with Progressive-scan Capability (Example 2)  
Your TV must be capable of handing progressive scanning and have component video input capability.  
To COMPENENT VIDEO  
OUT jacks  
*Component video cable (not supplied)  
DVD video player  
To COMPONENT  
VIDEO INPUT jacks  
To AUDIO OUT jacks  
To AC 120V, 60Hz  
R
L
Y
P
B
PR  
AUDIO INPUT  
COMPONENT VIDEO INPUT  
*Audio cable (not supplied)  
To audio  
TV with progressive-scan  
capability  
input jacks  
*Please consult your local audio/video dealer.  
1. Connect the DVD video player to the component video input  
jacks of the TV. (The VIDEO OUT or S-VIDEO OUT jack  
connection is not necessary.)  
2. Set the VIDEO OUT SELECT switch to the COMPONENT  
positon.  
3. You also need to connect the left and right audio cables (not  
supplied) to the AUDIO OUT jack of DVD video player and  
the Audio input jacks of the TV.  
Notes:  
•
•
Please refer to your TV instruction manual.  
When you connect the DVD video player to your TV, be sure  
to turn off the power and disconnect both units from the wall  
outlet until all the connections have been made.  
Do not connect the DVD video player to a VCR directly. The  
playback picture will be distorted because DVD video discs  
are copy protected.  
•
4. Set the DVD video player to the PROGRESSIVE position.  
See page E15.  
Progressive Scanning  
While interlaced scanning produces one frame of video in two  
fields, progressive scanning creates one frame in one field.  
Conventional interlaced scanning constitutes one second with  
30 frames (60 fields), but progressive scanning constitutes it with  
60 frames from scratch. Progressive scanning can reproduce  
shaper picture with high resolution for still image or other picture  
containing long texts or horizontal lines.  
This model has compliance with 525p (progressive) system.  
Interlaced scanning  
Progressive scanning  
-E10-  
DVD-SL33/CA(English)  
11  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADDITIONAL CONNECTION EXAMPLES  
Connecting to an Audio System and TV (Example 3)  
Connect the DVD video player to an Audio System and a TV.  
DVD video player  
To AC 120V, 60Hz  
TV with Audio/Video input jacks  
To VIDEO OUT jack (Yellow)  
To video input (Yellow)  
To AUDIO OUT jacks  
AUDIO  
VIDEO  
INPUT  
1
R-AUDIO-L VIDEO  
*Video cable  
(not supplied)  
*Audio cable  
(not supplied)  
Notes:  
Audio System  
•
Please refer to the instruction manual of  
your Audio System and TV.  
To audio input jacks  
(White) L  
(Red) R  
•
When you connect the DVD video player  
to other equipment, be sure to turn off the  
power and disconnect all of the equipment  
from the wall outlet until all the connec-  
tions have been made.  
L
AUDIO  
INPUT  
R
•
Do not connect the DVD video player to a  
VCR directly. The playback picture will be  
distorted because DVD video discs are  
copy protected.  
*Please consult your local audio/video dealer.  
Using the COMPONENT VIDEO OUT jacks  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the component video input jacks, connect  
the DVD video player to these jacks. (The VIDEO OUT or  
S-VIDEO OUT jack connection is not necessary.)  
You can enjoy high quality picture playback.  
2. Set the VIDEO OUT SELECT switch to the COMPONENT  
position.  
3. You also need to connect the left and right cable (not  
supplied) to the AUDIO OUT jacks of DVD video player  
and the Audio input jacks of the Audio System.  
4. Set the DVD video player to the INTERLACE position.  
Using the S-VIDEO jack  
Note:  
Please follow the steps before turn on the power.  
1. If your TV has the S-video input jack, connect the DVD  
video player with the S-video cable (not supplied). (The  
VIDEO OUT jack connection is not necessary.)  
You can enjoy clearer picture playback.  
2. Set the VIDEO OUT SELECT switch to the S-VIDEO  
position.  
3. You also need to connect the left and right audio cables  
(not supplied) to theAUDIO OUT jacks of DVD video player  
and the Audio input jacks of the Audio System.  
See page E15.  
TV  
DVD video player  
TV  
S-VIDEO IN 1  
To S-VIDEO  
OUT jack  
To S-video input jack  
*S-video cable  
(not supplied)  
*Please consult your local audio/video dealer.  
*Component video cable (not supplied)  
-E11-  
DVD-SL33/CA(English)  
12  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
•
•
•
For VIDEO connection, please refer to “BASIC CONNECTIONS”.  
Please refer to the instruction manual of your amplifier.  
When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wall  
outlet until all the connections have been made.  
Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder  
Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder  
(Example 4)  
To digital audio input  
*Coaxial cable  
(not supplied)  
Center  
speaker  
To COAXIAL DIGITAL OUT jack  
Front left  
speaker  
Front right  
speaker  
Subwoofer  
Surround left  
speaker  
Surround  
right speaker  
To enjoy Dolby Digital sound  
Select “Dolby Digital BitStream” in “Setting Digital Out” on the  
INITIAL SETTINGS. (See page E31.)  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of  
Dolby Laboratories.  
To enjoy DTS sound  
Select “DTS On” in “Setting Digital Out” on the INITIAL  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater  
Systems, Inc.  
SETTINGS. (See page E31.)  
To enjoy MPEG2 sound  
Select “MPEG BitStream” in “Setting Digital Out” on the INITIAL  
SETTINGS. (See page E31.)  
Connecting to a Digital Amplifier (Example 5)  
You can enjoy 2 Channel Digital Stereo Sound.  
Amplifier with an optical digital input  
To digital audio input  
*Coaxial audio cable  
(not supplied)  
To COAXIAL DIGITAL  
OUT jack  
Front right  
speaker  
Front left  
speaker  
To enjoy 2 Channel Digital Stereo sound  
*Please consult your local audio/video dealer.  
Select “Dolby Digital LPCM”, “MPEG LPCM”, and “DTS Off” in  
“Setting Digital Out” on the INITIAL SETTINGS. (See page E31.)  
Note:  
If “DTS On” is selected, loud noise will occur. (See page E31.)  
-E12-  
DVD-SL33/CA(English)  
13  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an Amplifier with Dolby Pro Logic Decoder (Example 6)  
Amplifier with Dolby Pro Logic Decoder  
To AUDIO INPUT jacks  
*Audio cable  
(not supplied)  
Center  
speaker  
To AUDIO OUT jacks  
Front left  
speaker  
Front right  
speaker  
Subwoofer  
Surround right  
speaker  
Surround left  
speaker  
Note:  
*Please consult your local audio/video dealer.  
Please refer to your amplifier instruction manual.  
Power Supply  
CAUTION:  
Connect the power cord to a 120VAC 60Hz outlet. This unit is  
equipped with a polarized plug. If you have difficulty inserting the  
plug, turn it over and reinsert it. If the unit will not be used for a  
long time, disconnect the AC plug from AC outlet.  
When connecting the DVD video player, follow the installa-  
tion instruction in “IMPORTANT SAFETY INSTRUCTIONS”  
on page E2.  
CAUTION:  
Notes:  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE  
OF PLUG TO WIDE SLOT, FULLY INSERT.  
•
Before plugging the power cord into an AC outlet, make sure  
that all the connections have been made.  
•
The unit is not disconnected from the AC power unless the  
power cord is unplugged from the AC outlet.  
ATTENTION:  
POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE  
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE  
CORRESPONDANTE DE LA PRISE ET POUSSER  
JUSQU’AU FOND.  
FOR SAFE AND EFFICIENT OPERATION  
•
•
Do not damage the power cord.  
•
When carrying the unit, be sure to remove a disc which  
When not in use, disconnect the power cord from the outlet.  
Grasp the plug, not the cord, when disconnecting the unit.  
If water should enter the unit, electrical shock or a malfunc-  
tion may result. Use in an area where there is low humidity  
and little dust.  
Do not disassemble or alter the unit in any way.  
Do not use the unit in areas where extremes in temperature  
occur (below 40˚F(5˚C) or exceeding 95˚F(35˚C)), or where  
it may be exposed to direct sunlight.  
Because of the DVD video player extremely low noise and  
wide dynamic range, there is a tendency to set the volume  
on the amplifier higher than necessary. Doing so may pro-  
duce an excessively high output from the amplifier which can  
cause damage to your speakers. Please be careful in this  
regard.  
may be inside and turn the power off. Then unplug the  
power cord from the AC outlet after 10 seconds. Carry-  
ing the unit with a disc inside may damage the disc and/  
or the unit.  
The unit is automatically set to the Screen Saver mode after  
approximately 15 minutes have elapsed under the stop or  
pause mode.  
The unit is automatically set to the standby mode after ap-  
proximately 30 minutes have elapsed under the complete  
stop mode.  
Do not install this equipment in confined space, such as a  
book case or built in cabinet.  
•
•
•
•
•
•
•
•
Sudden changes in the surrounding temperature can cause  
dew to form on the optical pickup lens inside the unit. Under  
this condition the unit may be unable to operate properly. If  
this should occur, remove the disc and allow the player to  
adjust to the surrounding temperature.  
Press [ q] (or [OPEN/CLOSE] on the remote control) when  
closing the disc tray. Do not push the disc tray.  
-E13-  
DVD-SL33/CA(English)  
14  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYABLE DISCS  
The following types of discs can be played on the unit.  
CAUTION:  
•
Only the above types of discs can be played on this unit.  
DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be  
played.  
Disc type and logo mark  
•
This unit can play back the DVD-R that has recorded movie  
data as well. However, some DVD-Rs cannot be played back  
depending on the recording conditions.  
DVD-Video  
Audio CD  
•
•
The DVD-R that has no movie data cannot be played back.  
This unit is to be used exclusively with the NTSC color system.  
PAL and SECAM system discs cannot be used with the unit.  
For MP3 CD, please see page E25.  
•
•
For Picture/JPEG CD, please see pages E29 and E30.  
Region Number  
Region number (Regional restriction code) is built-in to the unit  
and DVD video discs.  
Region number “1” or “ALL” of DVD video discs can be used on  
this unit.  
Handling, Storing and Cleaning Discs  
•
•
•
Fingerprints and dust should be carefully wiped from the  
signal surface of the disc (glossy side) with a soft cloth.  
Wipe in a straight motion from the center to the outside of  
the disc.  
Never use chemicals such as record cleaning sprays, an-  
tistatic sprays or fluids, benzene or thinner to clean the  
discs . These chemicals will permanently damage the plas-  
tic surface of the disc.  
DVD Video Disc  
DVD video discs are divided into title, and the titles are  
subdivided into chapters.  
To remove a disc from its storage case, press down on  
the center of the case and lift the disc out, holding it care-  
fully by the edges.  
•
•
Discs should be returned to their cases after use to pro-  
tect them from dust and scratches.  
To prevent warping the disc, do not expose it to direct  
sunlight, high humidity or high temperatures for extended  
periods of time.  
v
v
Title 1  
Title 2  
v
v
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5  
There are marks on some DVD video disc package.  
Example:  
•
Do not apply paper or write anything on either side of the  
disc. Sharp writing instruments, or the inks used in some  
felt-tip pens, may damage the surfaces of the disc.  
Multiple languages  
Multi-language subtitles  
Multi-angle  
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corpora-  
tion and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
Multi-aspect  
Region Number  
Closed caption  
Audio CD Disc  
Audio CD discs are divided into tracks.  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
-E14-  
DVD-SL33/CA(English)  
15  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Preparations  
Basic Playback  
Notes:  
•
Turn on the power (TV, Audio System, AV amplifier, etc.).  
•
Select the video input sources from your television.  
(Please refer to your TV instruction manual.)  
•
•
Do not touch the disc tray while it is moving.  
Never place anything except a disc on the disc tray. Foreign  
objects can damage the unit.  
Do not apply excessive force to the disc tray.  
Discs must be placed on the disc tray one at a time.  
TV  
•
•
When operation buttons are pressed, that operarion is displayed  
on the TV screen. The display turns off after several seconds.  
VIDEO  
3
2,4  
5
1
n
a
f
e
z/ON  
•
Select the playback picture size according to the aspect ratio  
of the TV. (For more details, see “Setting Display” on page  
E30.)  
q
OPEN/CLOSE  
4:3 LB  
(Letterbox):  
4:3 PS  
(Panscan):  
16:9 :  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
1
2,4  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
•
Select the audio input source (Audio System, AV amplifier,  
etc.).  
When the DVD video player is connected to the COM-  
PONENT VIDEO OUT jacks of the TV (see pages E8, E10  
and E11), you must select the INTERLACE or PROGRES-  
SIVE position.  
PAUSE/STEP  
PREV  
NEXT  
•
PLAY  
FWD  
CLEAR  
REV  
5
1
2
3
C
Note: Initial setting is “INTERLACE”. If you use a Con-  
ventional TV for first time, skip this section.  
1. Press [z/ON].  
1. Turn on the power (TV and DVD video player).  
•
•
“SANYO” logo appears on the TV screen.  
“-----” blinks, and then “NO dISC” appears on the FL  
display.  
2. In “No Disc” mode, until “  
” (INTERLACE) or “  
”
(PROGRESSIVE) appears on the TV screen.  
Conventional TV: Select “  
TV with Progressive-scan Capability: Select “  
Note:  
”.  
2. Press [qOPEN/CLOSE] (or [OPEN/CLOSE] on the remote  
”.  
control).  
•
“OPEN” appears on the FL display and the disc tray opens.  
In “  
” mode, the closed caption may not appear on the  
Note:  
TV screen.  
To open or close the disc tray, be sure to press [q OPEN/  
CLOSE] (or [OPEN/CLOSE] on the remote control). Do not  
press the disc tray with your hand.  
Important Note:  
•
This instruction manual explains the basic instruction of  
this unit using the remote control.  
3. Place the disc with the label facing up on the disc tray.  
•
Some DVD video discs have different functions that may  
not be explained in this indtruction manual. You may need  
extra instruction. In this case, please follow the instruc-  
tions displayed on the TV screen or jacket or case of the  
disc.  
or  
•
•
“
” may appear on the TV screen during operarion.  
This icon means that the function is not available on the  
disc now.  
For improvement, FL displays and on-screen displays sub-  
ject to change without notice.  
For 5-inch (12cm) disc  
For 3-inch (8cm) disc  
-E15-  
DVD-SL33/CA(English)  
16  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Press [qOPEN/CLOSE] (or [OPEN/CLOSE] on the remote  
Stopping Playback  
control) again.  
[DVD]  
•
•
The disc tray closes.  
“Reading” appears on the TV screen.  
•
Press [ n] once during playback. “Resume n” appears briefly  
on the TV screen.  
Note:  
When you press [ a PLAY] (or [ a ] on the unit), playback  
starts automatically from the point where you stopped. “ a”  
appears briefly on the TV screen.  
Some discs may start playback automatically.  
5. Press [ aPLAY] (or [ a] on the unit) to start playback.  
Note:  
•
“ a” appears.  
Some discs may not resume playback.  
Press [ n] twice during playback. “ n” appears briefly on the  
TV screen and playback stops completely.  
When you press [ aPLAY] (or [ a]), playback starts from the  
beginning of the disc.  
•
Example:  
Digital  
[CD]  
•
Elapsed playing time  
Press [ n] once during playback. The unit stops completely.  
To turn off the power, press [z/ON]. “OFF” appears briefly on the  
Notes:  
FL display.  
•
In some discs, even if 4:3 PS is selected, the black bands  
may remain on the screen.  
OPEN/CLOSE  
•
If the disc is loaded with the label side downward (and it is a  
single sided disc), or if a badly scratched disc is loaded, “No  
Play” appears on the TV screen. If this occurs, load the disc  
correctly or replace the disc.  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
z/ON  
PROGRAM  
/RANDOM  
LAST  
MEMO  
4
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
If a DVD disc menu screen appears on the TV screen...  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
TV  
5
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PREV  
NEXT  
MENU  
n(Stop)  
Play  
&
PLAY  
Languages  
M
ovie  
Audio  
FWD  
CLEAR  
REV  
Set-Up  
PLAY  
Subtitles  
Theatrical  
Scene  
T
railers  
Selections  
Continuing Playback from Where You Stopped  
Watching (LAST MEMO PLAY), for DVD only  
4
1. Press [ 4 ], [ a ], [ 5 ] or [ b ] (or the  
number buttons) to select the desired  
menu.  
1. Press [LAST MEMO] to stop playback.  
“Last Memo n” appears briefly on the TV screen.  
“StOP” appears on the FL display.  
ENT  
b
a
2. Press [ENT].  
Playback of the selected menu starts.  
5
2. Press [OPEN/CLOSE] (or [qOPEN/CLOSE] on the unit) to  
open the disc tray to change the disc, or press [z/ON] to turn  
off the power.  
Note:  
For more details, please refer to the jacket or case of the disc.  
3. Load the disc (or press [ aPLAY]), or press [z/ON] again.  
“Last Memo Play?” screen appears on the TV screen.  
To lock the disc tray  
You can lock the disc tray to prevent misuse of young children.  
While the disc tray is opened, press [qOPEN/CLOSE] on the  
until “LOC” appears on the FL display (or “Disc Tray Locked”  
appears on the TV screen). (The disc tray closes.)  
4. Press [ 4] to select “Yes”.  
Last Memo Play?  
Yes  
No  
•
The OPEN/CLOSE (or [qOPEN/CLOSE]) button will not  
function.  
To release this mode, press [q OPEN/CLOSE] on the unit  
until “UN-LOC” appears on the FL display (or “Disc Tray Un-  
locked” appears on the TV screen).  
Clear  
(The memory is released.)  
5. Press [ENT].  
Playback resumes from the point where you stopped.  
If desired, press [LAST MEMO] again.  
Notes:  
•
•
Point on up to 2 discs can be memorized.  
The Last Memo Play mode may not work correctly with some  
discs.  
-E16-  
DVD-SL33/CA(English)  
17  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a DVD Menu  
Notes:  
•
•
The operation may differ depending on the disc used.  
Selecting a menu may not be possible on some discs.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
1. Press [MENU].  
SUBTITLE  
CHANGE  
MENU  
The main menu screen will appear.  
4
1
SUBTITLE  
ON/OFF  
ENT  
b
a
Note:  
AUDIO  
TOP MENU  
RETURN  
3
2
5
Press [MENU] again to resume playback.  
REV SLOW  
FWD SLOW  
2. Press [ 4 ], [ 5 ], [ b ] or [ a ] (or the number buttons) to  
select the desired menu.  
3. Press [ENT].  
The selected menu playback starts.  
Selecting a Top Menu [DVD]  
Notes:  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
•
•
The operation may differ depending on the disc used.  
Selecting a top menu may not be possible on some discs.  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
1. Press [TOP MENU].  
SUBTITLE  
CHANGE  
MENU  
4
The top menu will appear (if the disc contains a top menu).  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
3
2. Press [ 4 ], [ 5 ], [ b ] or [ a ] (or the number buttons) to  
5
1
select the desired menu.  
2
REV SLOW  
FWD SLOW  
3. Press [ENT].  
The selected menu playback starts.  
Chapter (Track) Skip  
n
a
f
e
z/ON  
q
OPEN/CLOSE  
Skipping forward  
Press [NEXT e] (or e) during playback to skip to the next  
chapter (or track).  
“ e” appears briefly on the TV screen.  
A chapter (or track) is skipped each time the button is pressed.  
f e  
Skipping backward  
Press [PREV f] (or f) during playback to skip back to the  
beginning of the chapter (or track) currently play.  
“ f” appears briefly on the TV screen.  
AUD  
O
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Press the button again immediately to skip back to the begin-  
ning of the previous chapter (or track).  
PREV  
NEXT  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
Note:  
You can skip only through the chapters, not over the title on the  
DVD disc.  
1
2
3
C
Important Note:  
“
” may appear on the TV screen during operation. This  
icon means that the function is not available on the disc now.  
-E17-  
DVD-SL33/CA(English)  
18  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Title Search [DVD]  
Important Note:  
1. Press [SEARCH MODE] once during playback or in the stop  
“
” may appear on the TV screen during operation. This  
mode.  
icon means that the function is not available on the disc now.  
The title search screen appears on the TV screen.  
Example:  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Title Search  
-- /28  
PREV  
NEXT  
3
2
PLAY  
2. Press the number button(s) to enter the title number.  
Example:  
FWD  
CLEAR  
REV  
1
4
7
2
3
6
9
C
CLEAR  
1
To select Title No.3, press [3].  
To select Title No.10, press [1], then [0].  
To select Title No.24, press [2], then [4].  
Note:  
5
8
0
SEARCH  
MODE  
If you make a mistake, press [CLEAR].  
3. Press [aPLAY].  
Playback starts from the selected title.  
Time Search [CD]  
1. Press [SEARCH MODE] once during playback.  
Chapter Search [DVD]  
1. Press [SEARCH MODE] twice during playback.  
The chapter search screen appears on the TV screen.  
Example:  
The time search screen appears on the TV screen.  
Time Search  
--:--:--  
Title 01  
Chapter Search  
-- /35  
2. Press the number button(s) to enter the time.  
Example:  
2. Press the number button(s) to enter the chapter number.  
Example:  
2 minutes 5 seconds  
Press [2], [0] and [5].  
42 minutes 39 seconds Press [4], [2], [3] and [9].  
Note:  
If you make a mistake, press [CLEAR].  
To select Chapter No.3, press [3].  
To select Chapter No.10, press [1], then [0].  
To select Chapter No.24, press [2], then [4].  
Note:  
3. Press [aPLAY].  
If you make a mistake, press [CLEAR].  
Playback starts from the searched time in the track.  
3. Press [aPLAY].  
Playback starts from the selected chapter.  
Time Search [DVD]  
1. Press [SEARCH MODE] three times during playback.  
The time search screen appears on the TV screen.  
Track Search [CD]  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Time Search  
--:--:--  
PREV  
NEXT  
2
1
PLAY  
2. Press the number button(s) to enter the time.  
Example:  
FWD  
CLEAR  
REV  
1
4
7
2
3
6
9
C
CLEAR  
20 minutes 5 seconds  
42 minutes 39 seconds  
Press [2], [0], [0] and [5].  
Press [4], [2], [3] and [9].  
5
8
0
SEARCH  
MODE  
1 hour 4 minutes 35 seconds Press [1], [0], [4], [3] and [5].  
Note:  
If you make a mistake, press [CLEAR].  
1. Press the number buttons during playback or in the stop  
mode.  
Example:  
3. Press [aPLAY].  
To select Track No.3, press [3].  
To select Track No.10, press [1], then [0].  
To select Track No.24, press [2], then [4].  
Note:  
Playback starts from the searched time.  
Note:  
The Search mode may not work on some discs.  
If you make a mistake, press [CLEAR].  
2. Press [aPLAY].  
Playback starts from the selected track.  
-E18-  
DVD-SL33/CA(English)  
19  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fast Playback  
Fast forward playback  
SETUP  
MENU  
CHANGE  
4
Press [FWD c] repeatedly to select the fast speed forward  
playback (up to 200 times normal speed in DVD).  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
[DVD]  
5
c1 vc2 vc3 vc4 (4 steps)  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
[CD]  
c1 vc2 (2 steps)  
PREV  
NEXT  
PLAY  
REV  
FWD  
PLAY  
Press [aPLAY] to return to normal playback.  
FWD  
CLEAR  
REV  
1
4
7
2
3
6
9
C
Fast reverse playback  
Press [REV d] repeatedly to select the fast speed reverse play-  
back (up to 200 times normal speed in DVD).  
5
8
0
SEARCH  
MODE  
[DVD]  
d1 vd2 vd3 vd4 (4 steps)  
[CD]  
d1 vd2 (2 steps)  
Press [aPLAY] to return to normal playback.  
Important Note:  
“
” may appear on the TV screen during operation. This  
Note:  
icon means that the function is not available on the disc now.  
The sound is muted during fast playback in DVD.  
Slow Motion Playback [DVD]  
Forward slow playback  
SETUP  
MENU  
CHANGE  
4
Press [FWD SLOW ] repeatedly to select the forward slow  
speed playback.  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
1 v  
2 v  
3 v  
4 (4 steps)  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
REV  
SLOW  
Press [aPLAY] to return to normal playback.  
FWD  
SLOW  
PREV  
NEXT  
Reverse slow playback  
PLAY  
Press [REV SLOW  
speed playback.  
] repeatedly to select the reverse slow  
FWD  
CLEAR  
REV  
PLAY  
1
4
7
2
3
6
9
C
1 v  
2 v 3 v 4 (4 steps)  
5
8
0
SEARCH  
MODE  
Press [aPLAY] to return to normal playback.  
Note:  
The sound is muted during slow motion playback.  
5
Still Picture (Pause)  
PAUSE  
/STEP  
REV SLOW  
FWD SLOW  
Press [kPAUSE/STEP] during playback.  
PAUSE/STEP  
•
•
“ k” appears on the FL display.  
“ k” appears briefly on the TV screen.  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
[DVD]  
Still picture mode  
[CD]  
Pause mode  
PLAY  
1
2
3
C
Frame by Frame Advance Playback  
Press [aPLAY] to return to normal playback.  
[DVD]  
Press [kPAUSE/STEP] during still picture.  
Note:  
•
“ ka” appears briefly on the TV screen.  
The sound is muted during still picture.  
Each time the button is pressed, the picture advances one frame.  
Press [aPLAY] to return to normal playback.  
Note:  
•
•
The sound is muted.  
Frame playback is operated forward only.  
-E19-  
DVD-SL33/CA(English)  
20  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAM  
/RANDOM  
Picture Zoom (Pin Point Zoom) [DVD]  
1. Press [ZOOM] during normal/slow playback or still picture.  
The pin point guide appears on the TV screen.  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
ZOOM  
ENT  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
4, a, 5, b  
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
1
4
7
2
5
8
3
6
9
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
1
4
7
2
3
6
9
C
The guide divides the screen into nine, and the number shows  
the point.  
Number  
button  
5
8
0
SEARCH  
MODE  
Note:  
If you quit the screen, press [ZOOM].  
3. Press [ZOOM] again.  
•
•
•
The screen is magnified more than “  
1”.  
2. To select the point, do one of the following:  
“
2” appears briefly on the TV screen.  
•
•
Press [ 4], [ a], [ 5] or [ b], and press [ENT].  
Press the number button.  
If necessary, press [ 4], [ a], [ 5] or [ b] repeatedly to  
move the screen as desired.  
4. Press [ZOOM] to return to the original screen.  
•
•
•
The screen is magnified.  
•
“
Off ” appears briefly on the TV screen.  
“
1” appears briefly on the TV screen.  
If necessary, press [ 4], [ a], [ 5] or [ b] repeatedly to  
Note:  
move the screen as desired.  
Pin Point Zoom may not work on some discs.  
Viewing from a Desired Camera Angle  
(Multi-Angle) [DVD]  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ANGLE  
REPLAY  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
ANGLE  
4
Some DVD video discs may contain scenes which have been  
shot simultaneously from a number of different camera angles.  
The jacket or case of discs that are recorded with angles will be  
marked.  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
Example:  
Note:  
The recorded angles differ depending on the disc used.  
1. Play the disc that is recorded with angles.  
Important Note:  
“
” may appear on the TV screen during operation. This  
2. Press [ANGLE] repeatedly until the desired angle appears.  
Example:  
icon means that the function is not available on the disc now.  
Angle Replay  
During Multi-angle playback screen, press [ANGLE REPLAY].  
The unit skips back to last approximately 10 seconds, changes it  
to the next camera angle and plays it, and continues playback. If  
desired, press the button again.  
-E20-  
DVD-SL33/CA(English)  
21  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat Playback  
Press [REPEAT] during playback (or programmed playback) of  
the title (or track) you want repeat.  
Each time the button is pressed, the repeat mode will be changed  
as follows.  
[DVD]  
TV screen  
Chapter  
FL display Operarion  
REP 1  
Repeat of chapter being played  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Title  
Off  
REP ALL  
Repeat all title being played  
Normal playback mode  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
ANGLE  
ON SCREEN  
REPEAT  
REPLAY  
SUBTITLE  
SETUP  
MENU  
CHANGE  
[CD]  
During Normal Playback  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
TV screen  
FL display Operarion  
AUDIO  
TOP MENU  
RETURN  
5
1
All  
Off  
REP 1  
REP ALL  
Repeat of track being played  
Repeat all tracks  
Normal playback mode  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
During Programmed Playback  
TV screen FL display Operarion  
Program 1 REP 1  
During Random Playback  
Repeat the programmed track  
being playback  
TV screen  
FL display  
REP 1  
Operarion  
1
Repeat of track being played  
Repeat all tracks at random  
Original random playback mode  
ProgramAll REP ALL  
Off  
Repeat all programmed tracks  
Original programmed playback  
mode  
All  
Off  
REP ALL  
Point A  
Point B  
Designated Range Repeat Playback  
(A-B Repeat)  
1. Press [A-B REPEAT] during playback at the beginning of the  
section you want to repeat (Point A).  
•
•
“
A-” appears on the TV screen.  
“ A ” appears on the FL display.  
2. Press [A-B REPEAT] again at the end of the section you want  
to repeat (Point B).  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
•
•
“
B” appears briefly on the TV screen.  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
“ -B ” appears, and “A-B” remains lit on the FL display.  
A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
The section between points A and B is played repeatedly.  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
3. To return to normal playback, press [A-B REPEAT] again.  
SUBTITLE  
ON/OFF  
ENT  
b
a
•
“
Off” appears briefly on the TV screen.  
AUDIO  
TOP MENU  
RETURN  
5
Note:  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Repeat playback or A-B repeat playback mode may not work  
correctly with some discs.  
Important Note:  
“
” may appear on the TV screen during operation. This  
icon means that the function is not available on the disc now.  
-E21-  
DVD-SL33/CA(English)  
22  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Random Playback [CD]  
PROGRAM  
/RANDOM  
1. Press [PROGRAM/RANDOM] once in the stop mode.  
REPEAT A-B REPEAT  
ANGLE  
1
•
“Random” appears on the TV screen.  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
2. Press [aPLAY] to begin random playback.  
“RND” appears on the FL display.  
The unit will automatically select tracks at random.  
SUBTITLE  
ON/OFF  
•
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
Notes:  
PAUSE/STEP  
n(Stop)  
•
•
To stop random playback, press [ n].  
[A-B REPEAT] and [SEARCH MODE] do not work during Ran-  
dom Playback.  
PREV  
NEXT  
PLAY  
2
FWD  
REV  
Important Note:  
“
” may appear on the TV screen during operation. This  
icon means that the function is not available on the disc now.  
Programmed Playback [CD]  
Up to 20 selections can be programmed.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
Programming procedure  
1. Press [PROGRAM/RANDOM] twice in the stop mode.  
1
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
•
“Program Mode” screen appears.  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
2. Press the number buttons to select the track number.  
Example:  
AUDIO  
TOP MENU  
RETURN  
5
3
REV SLOW  
FWD SLOW  
To select Track No.3, press [0], then [3].  
To select Track No.10, press [1], then [0].  
To select Track No.24, press [2], then [4].  
Notes:  
PAUSE/STEP  
PREV  
NEXT  
PLAY  
5
2
•
•
If you make a mistake, press [CLEAR].  
To quit the “Program Mode” screen, press [PROGRAM/  
RANDOM].  
FWD  
CLEAR  
REV  
1
4
7
2
3
6
9
C
CLEAR  
5
8
0
SEARCH  
MODE  
3. Press [ 5] to move the highlighted box down.  
Example:  
To clear the program one by one  
1. Press [PROGRAM/RANDOM] twice to display the “Program  
Mode” screen.  
2. Press [ 4] or [ 5] to select the track number.  
3. Press [CLEAR].  
To clear all the programs  
1. Press [PROGRAM/RANDOM] twice to display the “Program  
Mode” screen.  
4. Repeat steps 2 and 3 as above to select another track.  
2. Press [ 4] to select “All Clear”.  
5. Press [aPLAY] to start playback.  
3. Press [ENT].  
•
“PGM” appears on the FL display.  
When all programmed selections have played, the unit stops  
automatically.  
To change the program  
1. Press [PROGRAM/RANDOM] twice to display the “Program  
Mode” Screen.  
•
The programmed contents are retained in memory.  
Note:  
2. Press [ 4] or [ 5] to select the track number.  
To play the program again, press [PROGRAM/RANDOM] twice  
to call up the “Program Mode” screen, then press [aPLAY].  
3. Press the number buttons to select the track number to be  
replaced.  
Note:  
To quit the “Program Mode” screen, press [PROGRAM/  
RANDOM].  
-E22-  
DVD-SL33/CA(English)  
23  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Subtitle Language [DVD]  
This operation works only with discs on which multiple subtitle  
languages are recorded.  
1. Press [SUBTITLE ON/OFF] during playback.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
The subtitle language mark appears. (Example:  
If “ Off” appears, press the button again.  
1/3 en)  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
2. Press [SUBTITLE CHANGE] repeatedly until the desired sub-  
title language appears on the TV screen.  
MENU  
4
2
1
SUBTITLE  
ON/OFF  
ENT  
b
a
After a few seconds, “  
Example:  
” disappears.  
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
3/3  
fr  
French  
Notes:  
Important Note:  
•
In some cases, the subtitle language is not changed to the  
selected one.  
“
” may appear on the TV screen during operation. This  
icon means that the function is not available on the disc now.  
•
When a disc supporting closed caption is played, the subtitle  
and the closed caption may overlap each other on the TV  
screen. In this case, turn the subtitle off.  
•
•
•
•
When the desired language is not available even if the but-  
ton is pressed, the language is not available on the disc.  
When the power is turned on or the disc is replaced, select  
the subtitle language again.  
If the subtitle language is not necessary, press [SUBTITLE  
ON/OFF] to select “  
Off”.  
Please refer to “Setting Language” on page E31.  
Selecting Audio Soundtrack Language  
(Multi-Language) [DVD]  
This operation works only with discs on which multiple audio  
soundtrack languages are recorded.  
Hello!  
Holà!  
¡Hola!  
1. Press [AUDIO] during playback.  
2. Press [AUDIO] repeatedly until the desired language appears  
on the TV screen.  
Examples:  
1/4  
1/3  
fr  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
French  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
DTS  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
1, 2  
DTS sound  
REV SLOW  
FWD SLOW  
(If using an amplifier with DTS Decoder, the DTS sound will  
be heard. See page E12 for the amplifier connection.)  
PAUSE/STEP  
Notes:  
•
•
•
When the desired language is not selected even if the button  
is pressed, the language is not available on the disc.  
When the power is turned on or the disc is replaced, select  
the language again.  
If the language is not recorded on the disc, only the available  
language on the disc will be heard.  
-E23-  
DVD-SL33/CA(English)  
24  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting On-Screen Information  
Press [ON SCREEN] repeatedly to show the disc information  
(Title, Chapter, Title elapsed playing time, Language, etc.).  
For improvement, on-screen displays subject to change  
without notice.  
Example for Audio CD:  
1. Press [ON SCREEN].  
Example for DVD:  
1. Press [ON SCREEN] during playback.  
Track elapsed playing time  
02:29  
Chapter remaining playing time  
Title elapsed playing time  
00:08:20  
00:01:45  
2. Press [ON SCREEN] again.  
Track elapsed playing time  
2. Press [ON SCREEN] again.  
Chapter remaining playing time  
Title elapsed playing time  
CD  
Track 2/22  
02:29  
Chapter number  
Track number  
Title number  
3. Press [ON SCREEN] to close the disc information.  
DVD  
Title  
00:08:40  
3/35  
00:00:23  
1/3  
1/2  
Chapter  
Audio  
Subtitle  
1/4 Dolby D 5.1  
2/3 fr  
Ch en  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
Camera angle  
ON SCREEN  
SUBTITLE  
CHANGE  
MENU  
Subtitle language  
A kind of audio  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
Audio language  
5
3. Press [ON SCREEN] to close the disc information.  
Selecting Picture Mode  
Press [PICTURE MODE] to show the picture mode.  
Each time the button is pressed, the picture mode changes as  
follows:  
PICTURE MODE  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
Standard xMild xBlack and White xStandard ...  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
Important Note:  
“
” may appear on the TV screen during operation. This  
icon means that the function is not available on the disc now.  
-E24-  
DVD-SL33/CA(English)  
25  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 CD OPERATION  
MP3 CD Playback  
Before Starting  
This unit can play back the CD that has recorded music data,  
MP3 files.  
2
1, 3  
•
•
The file system is ISO9660 Level 1 and Level 2.  
If the CD has both audio CD tracks and MP3 files, only audio  
CD tracks are played.  
n
a
f
e
z/ON  
q
OPEN/CLOSE  
•
•
It would take 30 seconds or more for this unit to read MP3  
files depending on its structure.  
This unit can recognize up to 256 files or folders per disc.  
The CD with 257 files or folders and over is not available to  
this unit.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
1, 3  
•
MP3 CDs may not be played in the recorded order.  
1. Please use the MP3 software with the function that can  
record data alphabetically or numerically.  
2. Please refrain from making many sub-folders by  
preference.  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
ANGLE  
ON SCREEN  
I
REPLAY  
1. Press [qOPEN/CLOSE] (or [OPEN/CLOSE] on the remote  
However, some CD-R/RWs cannot be played back depending  
on the recording conditions.  
Before playing back MP3 files, please read the following.  
control).  
•
“OPEN” appears on the FL display, and the disc tray  
opens.  
MP3 CD  
Note:  
•
•
MP3 files must have the extension letters, “.MP3” or “.mp3”.  
Standard, sampling frequency, and the bit rate:  
MPEG-1 Audio  
To open or close the disc tray, be sure to press [q OPEN/  
CLOSE] (or [OPEN/CLOSE] on the remote control). Do not  
press the disc tray with your hand.  
32kHz, 44.4kHz, 48kHz  
32kbps ~ 320kbps (constant bit rate or variable bit rate)  
The recommended recording setting for a high-quality sound  
is 44.1kHz of sampling frequency and 128kbps of constant  
bit rate.  
2.Place the disc with the label facing up on the disc tray.  
•
LIMITATIONS ON DISPLAY  
•
Available letters for display are the following: capital or small  
alphabets of A through Z, and numbers of 0 through 9.  
Other letters than those above are replaced in “-” (hyphen).  
•
CAUTION:  
•
•
•
Some MP3 CDs cannot be played back depending on the  
recording conditions.  
The CD has no music data or non-MP3 files cannot be played  
back.  
The WMA files cannot be played back.  
File  
-/24  
00:00:00  
HYPER-EURO-MAX  
1
2
3
4
5
6
7
MUSIC001  
MUSIC002  
MUSIC003  
MUSIC004  
MUSIC005  
MUSIC006  
MUSIC007  
8
9
10  
11  
12  
MUSIC008  
MUSIC009  
MUSIC010  
MUSIC011  
MUSIC012  
File: MUSIC001  
File information  
Note:  
If the disc is loaded with the label side downward, or if a  
badly scratched disc is loaded, “No Play” appears on the TV  
screen.  
If this occurs, load the disc correctly or replace the disc.  
-E25-  
DVD-SL33/CA(English)  
26  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stopping Playback  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Press [ n] during playback. “ n” appears briefly on the TV screen  
and playback stops completely.  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
Pause  
MENU  
4
SUBTITLE  
ON/OFF  
Press [ kPAUSE/STEP] during playback.  
5
5
ENT  
b
a
4
•
•
“ k” appears briefly on the TV screen.  
“ k” appears on the FL display.  
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
Note:  
The sound is muted.  
PAUSE/STEP  
PREV  
NEXT  
Press [aPLAY] to return to normal playback.  
PLAY  
FWD  
REV  
File Skip  
Skipping forward  
4. Press [ 4], [ a], [ 5] or [ b] to move the highlighted box to  
the desired file.  
Press [NEXT e] during playback to skip to the next file.  
“ e” appears briefly on the TV screen.  
•
To go on to the next or previous directory, press [ 4], [ a],  
[ 5] or [ b].  
•
•
To go back to the previous directory, press [RETURN].  
In some discs, if [MENU] is pressed, it goes back to the  
first directory.  
Skipping backward  
Press [PREV f] during playback to skip back to the beginning  
of the file currently play.  
“ f” appears briefly on the TV screen.  
Press the button again immediately to skip back to the begin-  
ning of the previous file.  
5. Press [ENT] (or [aPLAY]) to start playback.  
•
•
•
“ a” appears briefly on the TV screen  
The letter’s color in the highlighted box turns green.  
“MP3” appears on the FL display.  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
Example: (the second directory)  
Current file elapsed playing time  
Total file number  
Current file number  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
ANGLE  
ON SCREEN  
REPLAY  
REPEAT  
SUBTITLE  
SETUP  
MENU  
CHANGE  
4
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
PAUSE  
/STEP  
NEXT  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
File  
MAX2  
13/24  
00:00:08  
PREV  
n(Stop)  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
13  
14  
15  
16  
17  
18  
19  
MUSIC013  
MUSIC014  
MUSIC015  
MUSIC016  
MUSIC017  
MUSIC018  
MUSIC019  
20  
21  
22  
23  
24  
MUSIC020  
PLAY  
1
2
3
C
MUSIC021  
MUSIC022  
MUSIC023  
MUSIC024  
Repeat Playback  
Press [REPEAT] during playback.  
Each time the button is pressed, the repeat mode will be changed  
as follows.  
Song: MUSIC013  
TV screen  
FL display  
REP 1  
Operation  
1
Repeat of file being played  
Repeat all files  
All  
Off  
REP ALL  
Normal playback mode  
Important Note:  
“
” may appear on the TV screen during operation. This  
Note:  
icon means that the function is not available on the disc now.  
Repeat playback may not work correctly with some disc.  
-E26-  
DVD-SL33/CA(English)  
27  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE DISC OPERATION  
2. Press [ 4 ], [ a ], [ 5 ] or [ b ] to move the cursor to the  
KODAK Picture CD Playback  
desired picture.  
With KODAK Picture CD, it’s easy to turn film into pictures you  
can email from your PC and view on this DVD video player!  
Just bring your film in for processing, and check the box for  
KODAK Picture CD. You’ll get back your prints and negatives as  
usual-plus you’ll get a special CD that contains your pictures  
along with software that lets you view, enhance, share, and print  
your pictures from your computer and view them on this DVD  
video player.  
•
To go to the next or previous thumbnail pictures, press  
[NEXT e] or [PREV f].  
3. Press [ENT] (or [a PLAY]) to start the slide show from the  
selected picture.  
•
If you press [kPAUSE/STEP] during the slide show, the  
slide show stops temporary. “ k” appears briefly.  
Press [aPLAY] (or [kPAUSE/STEP]) again to resume  
the slide show.  
•
If the picture appears upside down or sideways, do  
the following steps.  
1) Press [kPAUSE/STEP], if necessary.  
PICTURE  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
OPEN/  
CLOSE  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
2) Press [ANGLE] repeatedly until it's right side up.  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
ZOOM  
ENT  
ANGLE  
MENU  
4, a, 5, b  
“
”, “  
”, “  
” or “Normal” appears  
SUBTITLE  
CHANGE  
MENU  
4
briefly on the TV screen.  
SUBTITLE  
ON/OFF  
ENT  
b
a
3) Press [a PLAY] (or [k PAUSE/STEP]) to skip to the  
next picture and continue the slide show.  
If you press [NEXT e] or [PREV f] during the slide  
show, it skips to the next picture or previous picture.  
AUDIO  
TOP MENU  
RETURN  
5
TOP MENU  
PAUSE  
/STEP  
•
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PREV  
NEXT  
PREV  
NEXT  
n(Stop)  
After the last picture has displayed, the last thumbnail pic-  
tures appear.  
PLAY  
FWD  
CLEAR  
REV  
PLAY  
•
To stop the slide show, press [ n ]. The thumbnail pic-  
tures appear.  
1
4
7
2
5
8
3
6
9
C
Number  
button  
0
SEARCH  
MODE  
•
If [TOP MENU] is pressed during the slide show, the  
thumbnail pictures appear.  
1. Load the disc with the label facing up on the disc tray.  
(Please refer to “MP3 CD OPERATION” on page E25.)  
Notes:  
•
If you press [MENU], the file list appears.  
Example:  
•
•
•
“PHOtO” appears on the FL display.  
“Picture CD” appears briefly on the TV screen.  
The first thumbnail pictures (maximum 9-picture) appear  
on the TV screen.  
Picture CD  
PICTURES  
-/37  
00:00:00  
Example:  
1
2
3
4
5
6
7
001-1A  
8
9
008-8A  
009-9A  
001-2A  
001-3A  
001-4A  
001-5A  
001-6A  
001-7A  
10  
11  
12  
13  
14  
010-10A  
011-11A  
012-12A  
013-13A  
014-14A  
File: 001-1A  
If you start the slide show from the file list...  
•
1) Press [ 4], [ a], [ 5] or [ b] to move the highlighted box  
to the desired file.  
2) Press [ENT] (or [aPLAY]) to start the slide show.  
The file list appears after the last picture has displayed.  
If you press [TOP MENU], the thumbnail pictures appear.  
FUJICOLOR CD can be used.  
The file system is ISO9660 Level 1 and Level 2.  
This unit can recognize up to 256 files or folders per disc.  
The CD with 257 files or folders and over is not available to  
this unit.  
•
•
•
•
•
Some discs cannot be played back depending on the record-  
ing conditions.  
KODAK and Picture CD are registered trademarks of Eastman  
Kodak company.  
-E27-  
DVD-SL33/CA(English)  
28  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG CD Playback  
You can also view digital images from JPEG files on disc cre-  
ated by your computer.  
Picture Zoom  
1. Press [kPAUSE/STEP] at the desired picture (KODAK Pic-  
ture CD and JPEG CD).  
•
It would take 30 seconds or more for this unit to read the  
JPEG files depending on its structure.  
2. Press [ZOOM].  
•
Some JPEG files cannot be played back depending on the  
recording conditions.  
3. Press [ 4], [ a], [ 5], [ b] and [ENT] (or number buttons).  
The picture is magnified.  
1. Load the disc with the label facing up on the disc tray.  
(Please refer to “MP3 CD OPERATION” on page E25.)  
(For more details, please refer to “Picture Zoom” on page  
E20.)  
•
•
“FILE” appears on the FL display.  
The file list appears on the TV screen.  
4. Press [aPLAY] to resume the slide show.  
Example:  
If the disc is mixed with MP3 and JPEG files...  
1. Press [ 4], [ a], [ 5] or [ b] to move the highlighted box  
to the desired file.  
File  
Root  
1/43  
00:00:00  
2. Press [ENT] (or [aPLAY]) to start playback (or slide show).  
•
•
If you start from the MP3 file, the unit plays the MP3  
files. But the unit skips the JPEG files automatically.  
If you start from the JPEG file, the unit plays the JPEG  
files. But the unit skips the MP3 files automatically.  
1
2
3
4
5
6
7
001  
8
9
008  
009  
010  
011  
012  
013  
014  
002  
003  
004  
005  
006  
007  
10  
11  
12  
13  
14  
File: 001  
2. Press [ 4], [ a], [ 5] or [ b] to move the highlighted box to  
the desired file.  
3. Press [ENT] (or [a PLAY]) to start the slide show from the  
selected file.  
•
•
“PHOtO” appears on the FL display.  
If you press [kPAUSE/STEP] during the slide show, the  
slide show stops temporary. “ k” appears briefly.  
Press [a PLAY] (or [k PAUSE/STEP]) again to resume  
the slide show.  
•
•
If the picture appears upside down or sideways, do  
the following steps.  
1) Press [kPAUSE/STEP], if necessary.  
2) Press [ANGLE] repeatedly until it's right side up.  
“
”, “  
”, “  
” or “Normal” appears  
briefly on the TV screen.  
3) Press [a PLAY] (or [k PAUSE/STEP]) to skip to the  
next picture and continue the slide show.  
If you press [NEXT e] or [PREV f] during the slide  
show, it skips to the next file or previous file.  
Important Note:  
“
” may appear on the TV screen during operation. This  
After the last file has displayed, the file list appears.  
Notes:  
icon means that the function is not available on the disc now.  
•
•
To stop the slide show, press [ n]. The file list appears.  
If the disc is loaded with the label side downward, or if a  
badly scratched disc is loaded, “No Play” appears on the TV  
screen. If this occurs, load the disc correctly or replace the  
disc.  
•
•
The file system is ISO9660 Level 1 and Level 2.  
This unit can recognize up to 256 files or folders per disc.  
The CD with 257 files or folders and over is not available to  
this unit.  
•
•
JPEG resolution up to 5760 x 3840.  
Some discs cannot be played back depending on the record-  
ing conditions.  
-E28-  
DVD-SL33/CA(English)  
29  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIAL SETTINGS  
Once the initial settings have been completed, the unit can al-  
Notes:  
ways be operated under the same conditions.  
The settings will be retained in the memory until they are changed,  
even if the power is turned off.  
•
In this instruction manual, the language in on-screen  
display is English.  
If you change the language, please follow the selected  
language in on-screen display.  
•
•
You cannot switch audio sound track languages if there is  
only one language recorded on the disc.  
When you play back a DVD video disc, the unit automati-  
cally displays the pre-selected subtitle language if it is in-  
cluded on the disc.  
Setting Language  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
•
•
If “Others” is selected, enter the language code. (See “LAN-  
GUAGE CODE LIST” on page E33.)  
For improvement, on-screen displays subject to  
change without notice.  
“Language” is highlighted.  
Language  
Display  
Digital Out  
Parental  
2. Press [ENT].  
“Language” screen appears.  
PICTURE  
3. Press [ 5] or [ 4] to select the item (highlighted).  
z/ON LAST MEMO  
OPEN/CLOSE  
MODE  
Example:  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
Language  
Display  
Digital Out  
Parental  
SUBTITLE  
CHANGE  
MENU  
4
4
5
SETUP  
ENT  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
OSD  
English  
5
Audio  
Subtitle  
DVD Menu  
Disc  
Disc  
Disc  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
4. Press [ENT].  
1
4
7
2
3
6
9
C
The submenu appears.  
Example:  
5
8
0
SEARCH  
MODE  
Language  
Display  
Digital Out  
Parental  
English  
OSD  
Audio  
Subtitle  
DVD Menu  
English  
Español  
Français  
Deutsch  
Portugues  
Disc  
Disc  
Disc  
5. Press [ 5] or [ 4] to select the language (highlighted).  
6. Press [ENT].  
The selected language remains.  
7. Repeat steps 3 ~ 6 for other items.  
Note:  
If “Others” is selected, enter the language code. (See “LAN-  
GUAGE CODE LIST” on page E33.)  
8. Press [ 4] to skip back to the setup screen (or press [SETUP]).  
-E29-  
DVD-SL33/CA(English)  
30  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Display  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
Language  
Display  
Digital Out  
Parental  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
MENU  
2. Press [ a] to select “Display”.  
4
4
SETUP  
ENT  
SUBTITLE  
ON/OFF  
ENT  
b
a
a
5
3. Press [ENT].  
AUDIO  
TOP MENU  
RETURN  
5
“Display” screen appears.  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Language  
Display  
Digital Out  
Parental  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
Dimmer  
TV Type  
Normal  
4:3 LB  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
4. Press [ENT] again.  
The submenu (FL display brightness on the player, “Normal”  
and “Dark”) appears.  
Dimmer  
TV Type  
Normal  
4:3 LB  
Normal  
Dark  
5. Press [ 5] or [ 4] to select the FL display brightness.  
Example: To select “Dark”.  
4:3 LB (Letterbox):  
Select when a conventional TV set  
is connected.  
Dimmer  
TV Type  
Normal  
4:3 LB  
Normal  
Dark  
When the wide screen disc is played  
back, the black bands appear at the  
top and bottom of screen.  
6. Press [ENT].  
(In this example, “Dimmer Dark” remains.)  
7. Press [ 5] to select “TV Type”.  
8. Press [ENT].  
4:3 PS (Panscan):  
Select when a conventional TV set  
is connected.  
When the wide screen disc is played  
back, it displays pictures cropped  
to fill to your TV screen. The left and  
right edges are cut off.  
The submenu (“4:3 LB”, “4:3 PS” and “16:9”) appears.  
Dimmer  
TV Type  
Drak  
4:3 LB  
Cut off  
Cut off  
4:3 LB  
4:3 PS  
16:9  
16:9 :  
Select when a wide screen TV set  
9. Press [ 5] or [ 4] to select the appropriate setting for your  
TV screen size.  
is connected.  
Played in “FULL” size. (Setting the  
wide screen TV to “FULL” mode is  
also necessary.)  
Example: To select “4:3 PS”  
Dimmer  
TV Type  
Drak  
4:3 LB  
Notes:  
4:3 LB  
4:3 PS  
16:9  
•
The screen size may differ depending on the DVD video  
discs.  
•
If you select 16:9 to get rid of the black bands on screen  
when wide screen disc is played back, picture may be  
slightly distorted.  
10. Press [ENT].  
•
In some discs, even if 4:3 PS is selected, the black bands  
may remain on the screen.  
(In this example, “TV Type 4:3 PS” remains.)  
11. Press [ 4] to skip back to the setup screen (or press [SETUP]).  
-E30-  
DVD-SL33/CA(English)  
31  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Digital Out  
PICTURE  
MODE  
z/ON LAST MEMO  
OPEN/CLOSE  
If the COAXIAL DIGITAL OUT jack is connected to the amplifier,  
you must set as follows:  
PROGRAM  
/RANDOM  
REPEAT A-B REPEAT  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
SUBTITLE  
CHANGE  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
MENU  
4
4
a
5
SETUP  
ENT  
SUBTITLE  
ON/OFF  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
Language  
Display  
Digital Out  
Parental  
REV SLOW  
FWD SLOW  
PAUSE/STEP  
2. Press [ a] to select “Digital Out”.  
PREV  
NEXT  
PLAY  
3. Press [ENT].  
FWD  
CLEAR  
REV  
“Digital Out” screen appears.  
1
4
7
2
3
6
9
C
5
8
0
SEARCH  
MODE  
Language  
Display  
Digital Out  
Parental  
96kHz LPCM  
Dolby Digital  
DTS  
48 kHz LPCM  
96kHz LPCM (96kHz Liner Pulse Code Modulation):  
If your amplifier is available for 96kHz sampling, select “96kHz  
LPCM”. If not, select "48kHz LPCM".  
LPCM  
Off  
LPCM  
MPEG  
Notes:  
•
4. Press [ 5] or [ 4] to select the item (highlighted).  
When “48kHz LPCM” is set, there are 48kHz LPCM audio  
signals from the AUDIO OUT jacks, not 96kHz LPCM au-  
dio signals.  
When playing back the DVD video disc which recorded  
with 96kHz LPCM, there is no digital output.  
However playing back the DVD video disc with no copy-  
right protection, the sound is original recorded sound.  
5. Press [ENT].  
The submenu appears.  
Example:  
•
•
96kHz LPCM  
Dolby Digital  
DTS  
48 kHz LPCM  
LPCM  
LPCM  
BitStream  
Off  
Dolby Digital:  
If your amplifier has Dolby Digital Decoder, select “BitStream”.  
MPEG  
LPCM  
If not, select “LPCM”.  
DTS:  
6. Press [ 4] or [ 5] to select the submenu (highlighted).  
If your amplifier has DTS Decoder, select “On”. If not, select  
Example: To select “Dolby Digital BitStream”.  
“Off”.  
96kHz LPCM  
Dolby Digital  
DTS  
48 kHz LPCM  
LPCM  
MPEG (Moving Picture Expert Group):  
If your amplifier has MPEG2 Decoder, select “BitStream”. If  
not, select “LPCM”.  
LPCM  
BitStream  
Off  
LPCM  
MPEG  
7. Press [ENT].  
(In this example, “Dolby Digital BitStream” remains.)  
8. Repeat steps 4 ~ 7 for other items.  
9. Press [ 4] to skip back to the setup screen (or press [SETUP]).  
-E31-  
DVD-SL33/CA(English)  
32  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANGLE  
ZOOM  
SETUP  
ANGLE  
ON SCREEN  
REPLAY  
Setting Parental  
SUBTITLE  
CHANGE  
MENU  
4
a
5
4
SETUP  
ENT  
SUBTITLE  
ON/OFF  
1. Press [SETUP] in the stop mode.  
The setup screen appears.  
ENT  
b
a
AUDIO  
TOP MENU  
RETURN  
5
REV SLOW  
FWD SLOW  
PAUSE/STEP  
Language  
Display  
Digital Out  
Parental  
PREV  
NEXT  
PLAY  
FWD  
CLEAR  
REV  
2. Press [ a] to select “Parental”.  
1
4
7
2
3
6
9
C
CLEAR  
Number  
buttons  
5
8
0
3. Press [ENT].  
SEARCH  
MODE  
“Parental” screen appears.  
8. Press [ENT].  
Language  
Display  
Digital Out  
Parental  
The password is now set.  
Password  
Level  
----  
1
Password  
Level  
----  
Off  
Note:  
4. Press [ 5] to skip “Password ----” and select “Level”.  
If you do not set it, Parental Control does not work, and  
it returns to the initial settings.  
Password  
Level  
----  
Off  
9. Press [SETUP].  
The setup screen disappears.  
5. Press [ENT] repeatedly to select the parental lock level (“Level  
Off” ~ “Level 8”).  
Example: To select “Level 1”  
Parental Control  
MPAA (Motion Picture Association of America) Guideline is a  
rating system that provides advanced cautionary information  
to parent about the content of movie programs.  
Password  
Level  
----  
1
The parental lock level is equivalent to the following MPAA  
Rating System.  
Level 7: NC-17 (No one 17 and under admitted)  
Level 6: R (Restricted)  
6. Press [ 4] to return to “Password ---”.  
Level 4: PG-13 (Parents strongly cautioned)  
Level 3: PG (Parental guidance suggested)  
Level 1: G (General audiences)  
7. Enter a number in 4 digits.  
Password  
Level  
1
Some DVD discs contain a restriction level which enables par-  
ents to prevent playback of discs by children. This unit is  
equipped with a password designed to prevent children chang-  
ing the level.  
Note:  
If you make a mistake, press [CLEAR].  
You cannot play DVD video discs rated higher than the level  
you selected unless you cancel the parental lock function.  
For example, when you select level “5”, the unit will not play  
discs with ratings of “6”, “7” or “8”.  
The information will appear on the TV screen.  
If you forget the password...  
Enter “788444” even if 4 digits “----” appears, then press [ENT]  
to clear the current password.  
Enter a new password and set the parental lock level again.  
Note:  
DVD video discs may or may not respond to the parental lock  
settings. Make sure this function works with your DVD video  
discs.  
-E32-  
DVD-SL33/CA(English)  
33  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE CODE LIST  
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and “DVD MENU”.  
Code  
Language  
abbreviation  
Language  
Code  
Language  
abbreviation  
Language  
Code  
Language  
abbreviation  
Language  
Kirundi  
Romanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangro  
Serbo-Croatian  
Singhalese  
Slovak  
Slovenian  
Samoan  
Shona  
6565  
6566  
6570  
6577  
6582  
6583  
6589  
6590  
6665  
6669  
6671  
6672  
6673  
6678  
6679  
6682  
6765  
6779  
6783  
6789  
6865  
6869  
6890  
6976  
6978  
6979  
6983  
6984  
6985  
7065  
7073  
7074  
7079  
7082  
7089  
7165  
7168  
7176  
7178  
7185  
7265  
7273  
7282  
7285  
7289  
7365  
aa  
ab  
af  
am  
ar  
as  
ay  
az  
ba  
be  
bg  
bh  
bi  
Afar  
7369  
7375  
7378  
7383  
7384  
7387  
7465  
7473  
7487  
7565  
7575  
7576  
7577  
7578  
7579  
7583  
7585  
7589  
7665  
7678  
7679  
7684  
7686  
7771  
7773  
7775  
7776  
7778  
7779  
7782  
7783  
7784  
7789  
7865  
7869  
7876  
7879  
7967  
7977  
7982  
8065  
8076  
8083  
8084  
8185  
8277  
ie  
ik  
in  
is  
it  
iw  
ja  
Interlingue  
Inupiak  
Indonesian  
Icelandic  
Italian  
Hebrew  
Japanese  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean  
Kashmiri  
Kurdish  
Kirghiz  
Latin  
Lingala  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
8278  
8279  
8285  
8287  
8365  
8368  
8371  
8372  
8373  
8375  
8376  
8377  
8378  
8379  
8381  
8382  
8383  
8384  
8385  
8386  
8387  
8465  
8469  
8471  
8472  
8473  
8475  
8476  
8478  
8479  
8482  
8483  
8484  
8487  
8575  
8582  
8590  
8673  
8679  
8779  
8872  
8979  
9072  
9085  
rn  
ro  
ru  
rw  
sa  
sd  
sg  
sh  
si  
Abkhazian  
Afikaans  
Amharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
ji  
jw  
ka  
kk  
kl  
km  
kn  
ko  
ks  
ku  
ky  
la  
sk  
sl  
sm  
sn  
so  
sq  
sr  
ss  
st  
su  
sv  
sw  
ta  
te  
tg  
th  
ti  
tk  
tl  
tn  
to  
Bislama  
Bengali; Bangla  
Tibetan  
bn  
bo  
br  
Somali  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Breton  
ca  
co  
cs  
cy  
da  
de  
dz  
el  
en  
eo  
es  
et  
eu  
fa  
fi  
fj  
fo  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
German  
Bhutani  
Greek  
ln  
lo  
lt  
lv  
Telugu  
Tajik  
Thai  
mg  
mi  
mk  
ml  
mn  
mo  
mr  
ms  
mt  
my  
na  
ne  
nl  
no  
oc  
om  
or  
pa  
pl  
English  
Esperanto  
Spanish  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faeroese  
French  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Turkish  
Tsonga  
Tatar  
Malay  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Punjabi  
tr  
ts  
tt  
fr  
fy  
tw  
uk  
ur  
uz  
vi  
vo  
wo  
xh  
yo  
zh  
zu  
Twi  
Ukrainian  
Urdu  
Frisian  
Irish  
ga  
gd  
gl  
gn  
gu  
ha  
hi  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Uzbek  
Vietnamese  
Volapük  
Wolof  
Xhosa  
Hindi  
Polish  
Yoruba  
Chinese  
Zulu  
hr  
Croatian  
Hungarian  
Armenian  
Interlingua  
ps  
pt  
qu  
rm  
Pashto, Pushto  
Portuguese  
Quechua  
Rhasto-Romance  
hu  
hy  
ia  
-E33-  
DVD-SL33/CA(English)  
34  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
If you have followed the instructions and are having difficulty operate the unit, locate the SYMPTOM in the left column below. Check  
the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.  
SYMPTOM  
POSSIBLE CAUSE  
CORRECTIVE ACTION  
No power.  
The power is on, but the player does not work. No disc is loaded.  
No power plug connection at the AC wall outlet. Insert the power plug into the AC wall outlet.  
Load a disc.  
No picture.  
An unplayable disc is loaded.  
Load a playable disc. (Check the disc logo, type,  
color system and region number. See page E14.)  
The TV is not set to receive signal from the player. Select the correct input function on the TV.  
The video cable is not connected.  
The S-video cable is not connected.  
“PROGRESSIVE” mode is set.  
The TV is turned off.  
Connect the video cable into the jack.  
Connect the video cable into the jack.  
Select “INTERLACE” mode. (See page E15.)  
Turn on the TV.  
No sound.  
The audio cables are not connected.  
The audio equipment is turned off.  
Connect the audio cables into the jacks.  
Turn on the audio equipment connected with the  
audio cable.  
The playback picture is poor.  
An unplayable disc is loaded.  
Load a playable disc. (Check the logo, type, color  
system and region number. See page E14.)  
“
” appears on the TV screen.  
The selected function does not operate on the The feature or action cannot be completed at this  
disc now.  
time because:  
•
•
•
The feature is not available at the moment.  
The DVD software restricts it.  
The DVD software doesn’t support the fea-  
ture (e.g., angles).  
The unit does not start playback.  
No disc is loaded.  
Load a disc.  
An unplayable disc is loaded.  
Load a playable disc. (Check the disc, logo, type,  
color system and regional code. See page E14.)  
The disc is loaded with the label side down.  
The disc is dirty.  
Load the disc on the disc tray correctly.  
Clean the disc or replace it. (See page E14.)  
“PARENTAL” is set.  
Cancel the parental lock function or change the  
rating level. Reset it after play. (See page E32.)  
“No Play” appears on the TV screen.  
An unplayable disc is loaded.  
“PARENTAL” is set.  
Load playable disc. (Check the disc logo, type,  
color system and region number. See page E14.)  
Cancel the parental lock function or change the  
rating level. Reset it after play. (See page E32.)  
The disc may not have the correct file or data.  
The disc tray may be locked.  
Load a playable disc.  
Press the q OPEN/CLOSE button on the unit  
until “UN-LOC” appears. (See page E16.)  
The disc tray does not open.  
The display is set to “Dark”.  
Reset it to “Normal”. (See page E30.)  
The FL display on the unit is dark.  
-E34-  
DVD-SL33/CA(English)  
35  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMPTOM  
POSSIBLE CAUSE  
The unit must be reset.  
CORRECTIVE ACTION  
The operation or display is not normal.  
1. Disconnect the power cord.  
2. Reconnect the power cord.  
3. Resume operation.  
The remote control does not work properly.  
The batteries in the remote control are weak, or  
installed incorrectly.  
Check the battery polarity (+ or –).  
Replace the batteries. (See page E6.)  
The remote control is not aimed at the remote  
sensor window.  
Aim the remote control at the remote sensor  
window. (See page E6.)  
SERVICING:  
Should this product require service, refer to the SANYO DVD limited warranty.  
If you do not have a convenient SANYO service station nearby, contact the SANYO dealer where you purchased the unit. Be sure to  
give the model number and explain the problem. The dealer will advise you how to obtain service.  
MAINTENANCE  
Cleaning the cabinet  
WARNING:  
Use a clean soft cloth moistened with plain lukewarm water and  
FOR YOUR PERSONAL SAFETY, BE SURE TO DISCON-  
wrung dry. Never use benzol, benzene or other strong chemical  
NECT THE AC POWER CORD BEFORE PROCEEDING  
cleaners since these could damage the finish of your unit. It is  
WITH ANY MAINTENANCE OR CLEANING.  
important that no liquid reaches the inside of the unit.  
SPECIFICATIONS  
Type:  
DVD Video player  
AUDIO OUT:  
R: 2 V rms  
Signal format:  
L: 2 V rms  
NTSC color  
VIDEO OUT:  
Laser:  
1.0 Vp-p (75 Ω)  
Semiconductor laser, wavelength 650 nm/790 nm  
Frequency range (digital audio):  
4 Hz to 44 kHz (DVD fs: 96 kHz)  
Signal to nose ratio:  
More than 105 dB  
Harmonic distortion (digital audio)  
0.003 %  
Wow and flutter:  
DIGITAL OUT:  
Coaxial  
Power requirements:  
AC 120 V, 60 Hz  
Power consumption:  
10 Watts  
Dimensions (W x H x D):  
Approx. 17.1" x 2" x 9.1" (435 x 50 x 230 mm)  
Weight:  
Below meansurable level  
Outputs:  
Approx. 4.5 lbs (2.05 kg)  
S-VIDEO OUT:  
Y: 1.0 Vp-p (75 Ω)  
C: 0.286 Vp-p (75 Ω)  
COMPONENT VIDEO OUT:  
Y: 1.0 Vp-p (75 Ω)  
P
B/CB: 0.7 Vp-p (75 Ω)  
PR/CR: 0.7 Vp-p (75 Ω)  
IMPORTANT INFORMATION  
Because its products are subject to continuous improvement, SANYO reserves the right to modify product designs and specifications without  
notice and without incurring any obligation.  
-E35-  
DVD-SL33/CA(English)  
36  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE SANYO COMFORT WARRANTY  
AUDIO/VIDEO PRODUCTS  
WARRANTY APPLICATION  
WARRANTY BECOMES VOID  
New, unused Sanyo Audio/Video products purchased  
through a Sanyo authorized dealer in Canada are warranted  
against manufacturing defects in materials and workmanship  
for ONE YEAR from the date of purchase by the original  
retail purchaser. This warranty only applies in favor of the  
original retail purchaser of the warranted product.  
This warranty becomes void if the product’s serial numbers  
are altered or removed or if any repair to the product is  
made  
other than by SANYO Canada Inc. or by an authorized  
Sanyo Service Depot.  
LIMITATIONS  
SANYO CANADA INC.’S RESPONSIBILITY  
During the warranty period, SANYO Canada Inc. will repair,  
or at our option, replace an Audio/Video product which  
shows evidence of a manufacturing defect in materials or  
workmanship.  
(a) SANYO Canada Inc. reserves the right to change or  
improve the design of the model of the product  
warranted hereunder without incurring any obligation to  
make any  
modifications to or to install any improvement in or on  
the product.  
(b) In no event shall SANYO Canada Inc. or any of its  
Authorized Dealers be liable for special or consequential  
damage arising from the use of this product.  
Replacement PARTS are warranted for the remaining  
portion of the warranty period.  
WHAT IS NOT COVERED  
(a) Products purchased outside Canada.  
(b) Products purchased in a used condition.  
(c) Problems due to product set-up and installation.  
(d) Adjustments that are outlined in the Operating Manual.  
(e) Accessory items including antenna, batteries, cassette  
tapes, cables, etc.  
STATUTORY WARRANTIES  
The above provisions do not preclude the operation of any  
applicable provincial statute which in certain circumstances  
may not allow some of the limitations and exclusions  
described in this Warranty. Where any terms of this  
Warranty  
(f) Damage in or due to transportation.  
(f) Damage due to improper maintenance, improper wiring,  
accident, abuse, misuse or negligence.  
(h) Damage caused by lightning and power surges.  
are prohibited by such a statute, they shall be deemed null  
and void but the remainder of this warranty shall remain in  
effect.  
ORIGINAL RETAIL PURCHASER’S RESPONSIBILITY  
You, the original retail purchaser, must present your original,  
dated bill-of-sale together with this warranty to SANYO  
Canada Inc. or to an authorized Sanyo Service Depot when  
you make a claim under this Warranty.  
HOW TO OBTAIN WARRANTY SERVICE  
Please contact the Sanyo Authorized Dealer from whom the  
product was purchased, or contact us directly at:  
SANYO Canada Inc.  
1-300 Applewood Cres.  
Concord, Ont. L4K 5C7  
(905) 760-9944  
You, the original retail purchaser, are responsible for any  
costs of TRANSPORTING the product to and from SANYO  
Canada Inc. or an authorized Sanyo Service Depot. You also  
are responsible for the cost of any MAINTENANCE  
necessary in respect of the product.  
1-800-263-2244  
http://www.sanyocanada.com  
(R12)  
-E36-  
DVD-SL33/CA(English)  
37  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SANYO Canada Inc.  
-E37-  
DVD-SL33/CA(English)  
38  
13/06/2003, 10:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cordless Telephone 43 1088 User Guide
Radio Shack Scanner PRO 66 User Guide
RCA CRT Television F19442 User Guide
RCA Flat Panel Television L52FHD2X48 User Guide
RCA Projection Television P52936 User Guide
Ricoh Copier MP 2000LE User Guide
Sanyo Flat Panel Television AVL 191 User Guide
Scotsman Ice Ice Maker FME1504 User Guide
SECO LARM USA Door SK 1131 SQ User Guide
Sennheiser Headphones HD 457 User Guide