INSTRUCTION MANUAL
Digital Movie Camera
VPC-HD1AEX
VPC-HD1A
Important note
This manual explains how to safely operate the VPC-HD1AEX and VPC-
HD1A.
Any information regarding only one of these products will be labeled as such.
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR CANADIAN USERS
i This Class B digital apparatus complies with Canadian ICES-003.
FOR EU USERS
Note:
iThis symbol mark and recycle system apply only to EU
countries and do not apply to countries in other areas of
the world.
Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
Symbols used in this manual
HINT
Points giving some extended instructions or special points to pay
attention to.
CAUTION Points that require special attention.
(page xx) Refer to the page indicated for detailed information.
You may find the answers to questions or problems concerning camera
operation in the sections “COMMONLY ASKED QUESTIONS” (page 165)
and “TROUBLESHOOTING” (page 173).
English
Download from Www.Somanuals.com. All Manuals Search And Downloaidi.
SHOOT, PLAY BACK AND SAVE
Preparing the camera
1
Insert the card.
Card slot cover
Card
Card slot
2
Connect the cable adaptor to the camera, and connect the AC
adaptor.
Supplied cable adaptor
Supplied AC adaptor
To power outlet
Supplied power cord
iii English
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting
kVideo clip recording
Video clip recording
button [
]
1
Open the monitor unit, and
press the ON/OFF button
for at least 1 second to turn
the camera on.
Still image shooting
button [
]
2
3
Set the main switch to REC.
Press the video clip
recording button [
].
h Recording begins.
h To stop recording, press
the video clip recording
button again.
kStill image
photography
ON/OFF
button
1
Open the monitor unit, and
press the ON/OFF button
for at least 1 second to turn
the camera on.
Main switch
297
00:20:39
2
3
Set the main switch to REC.
Press the still image
shooting button [
].
F3.5
1/30
h The image is captured.
English
Download from Www.Somanuals.com. All Manuals Search And Downloiavd.
Playback
kVideo clip playback
Main switch
1
Set the main switch to PLAY.
h The display switches to the
Playback Screen.
h Toggle the SET button to
the left or right to display the
video clip you wish to play
back.
h Video clips are indicated by
a video clip pattern along
the top and bottom of the
screen.
2
Press the SET button.
h Playback of the selected
video clip begins.
SET button
h When the main switch is
moved to REC, the display
changes to the Shooting
Screen.
kStill image playback
1
Set the main switch to PLAY.
h The display switches to the
Playback Screen.
Video clip pattern
h To view other images,
toggle the SET button to the
left or right.
<Example: After recording a
video clip>
h When the main switch is
moved to REC, the display
changes to the Shooting
Screen.
When you are finished using the camera...
Press the ON/OFF button for at least 1 second to turn the camera off.
v
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Burn your recorded video clips onto a DVD
(Windows XP)
Using the supplied CD-ROM (SANYO Software Pack), you can import the
captured images to your computer and store them on a DVD. Detailed
information about the SANYO Software Pack can be found on page 4 in
the SANYO Software Pack INSTRUCTION MANUAL.
Install application programs
1
Set the supplied CD-ROM (SANYO Software Pack) in your
computer’s CD-ROM drive.
h The installation window opens.
2
Click on the application program you wish to install.
h Install the application program with which you can import images to a
computer (Photo Explorer).
h Install the application program with which you can create DVDs
(MovieFactory).
h After clicking on an application program, follow the instructions shown
on the monitor to install the program.
h When the installation is complete, the product registration window will
appear, but click on the Exit button to close the window.
English
Download from Www.Somanuals.com. All Manuals Search And Downlovadi.
SHOOT, PLAY BACK AND SAVE
3
In the installation window, click on [Finish] and remove the CD-ROM
from the computer’s CD-ROM drive.
<About the Kodak online service>
h When the installation window closes, a dialog box to connect to the
website introducing Kodak’s online service appears. Check the [No
thanks!] option button, and then click on the [OK] button.
Connect your camera to a computer
Use the supplied dedicated USB interface cable to connect your camera to a
computer (page 7 in the SANYO Software Pack INSTRUCTION MANUAL).
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
USB/AV terminal
To AC adaptor
To USB connector on the computer
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
Copy a video clip to your computer
Run PhotoExplorer, set the location of the camera’s data as the copy source,
and copy the video clip(s) to your computer (page 17 in the SANYO Software
Pack INSTRUCTION MANUAL).
vii English
Download from Www.Somanuals.com. All Manuals Search And Download.
Burn video clips onto a DVD
1
Click on your desktop’s [Ulead DVD MovieFactory 5 Launcher] icon
to run MovieFactory.
h The MovieFactory launcher appears.
h If the product registration screen appears, select [Register Later].
English viii
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOT, PLAY BACK AND SAVE
2
Click on [New Project]
h The [Create Video Disc] window opens.
ix English
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Set the [DVD] option to ON, and click on the [OK] button.
h The [Add/Edit Media] window opens.
4
Click on the [Add video files] icon.
[Add video files] icon
h The [Open Video File] dialog box opens.
h Open the folder that contains the video files
(My Documents\SANYO_PEX\datefolder).
English
Download from Www.Somanuals.com. All Manuals Search And Downloaxd.
SHOOT, PLAY BACK AND SAVE
5
Select the video clip files to burn onto the DVD.
h Select the files you wish to burn onto the DVD by clicking on them.
h To select multiple files, click on the individual files while holding down
the [Ctrl] button. If you select one file, hold down the [Shift] button and
click on another file in the list, all the files in between are also
selected.
6
Click on the [Open] button.
<When one video clip is selected>
h The [Open Video File] dialog box closes.
<When multiple video clips are selected>
h The [Rearrange clip order] dialog box opens.
h You can drag the clip file names to change the video clip playback
order.
h Click on the [OK] button, and the [Rearrange clip order] dialog box
closes.
h The file selected in step 5 appears in the [Add/Edit Media] window.
xi English
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
Click on the [Next] button.
h The window to edit the title page of your DVD appears.
Set your desired title page, and click on the [Next] button.
h The window to confirm the title page appears.
Click on the [Next] button.
h The window to export the video files to the DVD appears.
10 Set the [Recording format] to [DVD-Video].
11 Set a blank DVD in your computer’s disc
burner, and click on the [Burn] icon.
h A confirmation dialog box appears.
English xii
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOT, PLAY BACK AND SAVE
12 Click on the [OK] button.
h Disc writing begins.
h After burning the disc, a dialog box shows that burning is complete.
13 Click on the [OK] button.
h The DVD drive tray opens for you to remove the disc.
<About saving projects>
h After burning a disc, a save project dialog box appears. If you wish to
use the settings for the current project in subsequent projects, you
should save them. If you will not use the settings in subsequent
projects, it is not necessary to save them.
14 Click on the [OK] button.
h You are returned to the MovieFactory launcher.
15 Click on the exit MovieFactory button [×].
h The DVD is completed.
h MovieFactory is exited.
How was that? The convenient accessories not only let you immediately view
images captured with the camera, but you can also upload images to your
computer and create your original DVDs. Read the following explanations to
find out how you can fully enjoy your camera’s digital movie feature.
xiii English
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CONTENTS ........................................................................................... 1
QUICK SEARCH BY OPERATION ........................................................ 4
CHECKING THE INCLUDED ACCESSORIES ...................................... 7
GETTING THE MOST OUT OF YOUR CAMERA ............................... 11
SYSTEM MAP ..................................................................................... 14
„ SETUP
PARTS NAMES ................................................................................... 15
INSTALLING THE CARD ..................................................................... 20
PREPARING THE DOCKING STATION ............................................. 22
PREPARING THE REMOTE CONTROL UNIT ................................... 23
PREPARING THE POWER ................................................................. 26
TURNING THE CAMERA ON AND OFF ............................................. 30
OPERATION BUTTONS ...................................................................... 33
DATE AND TIME SETTING ................................................................. 35
„ BASIC OPERATION
BEFORE TAKING PICTURES ............................................................. 38
VIDEO CLIP RECORDING AND PLAYBACK ..................................... 42
CAPTURING AND PLAYING BACK STILL IMAGES .......................... 46
SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP .......... 51
SEQUENTIAL SHOTS ......................................................................... 52
RECORDING IN THE HD MODE ........................................................ 54
AUDIO RECORDING AND PLAYBACK .............................................. 56
SHOOTING AND PLAYBACK WITH THE REMOTE CONTROL
UNIT ................................................................................................ 59
USING THE ZOOM .............................................................................. 60
SHOOTING WITH THE FLASH ........................................................... 61
EXPOSURE CORRECTION ................................................................ 63
1
English
Download from Www.Somanuals.com. All Manuals Search And Download.
„ SHOOTING
DISPLAYING THE SHOOTING SETTING SCREENS .........................65
VIDEO CLIP MODE (IMAGE QUALITY) SETTING ..............................71
STILL IMAGE MODE (RESOLUTION) SETTING ................................72
SCENE SELECT ..................................................................................73
EXPOSURE SETTING .........................................................................74
FILTERS ...............................................................................................76
MOTION COMPENSATION (IMAGE STABILIZER) .............................77
FOCUS RANGE ...................................................................................79
FOCUS AREA SETTING ......................................................................81
LIGHT-MEASURING MODE SETTING ................................................82
ISO SENSITIVITY .................................................................................83
WHITE BALANCE ................................................................................84
SELF-TIMER ........................................................................................86
SEQUENTIAL SHOTS MODE SETTING .............................................87
„ PLAYBACK
DISPLAYING THE PLAYBACK SETTING SCREENS .........................89
PLAYBACK MODE ...............................................................................93
PLAYBACK VOLUME ...........................................................................94
IMAGE PROTECT ................................................................................95
ERASING DATA ...................................................................................97
ROTATE IMAGE ...................................................................................99
CHANGING IMAGE SIZE (RESIZE) ..................................................100
EXTRACTING A STILL IMAGE FROM A VIDEO CLIP ......................101
EDITING VIDEO CLIPS ......................................................................102
PRINT SETTINGS ..............................................................................110
SMOOTH PLAYBACK ........................................................................116
DISPLAYING IMAGE PROPERTIES (INFORMATION SCREEN) .....117
English
Download from Www.Somanuals.com. All Manuals Search And Downloa2d.
CONTENTS
„ OPTION SETTINGS
DISPLAYING THE OPTION SCREEN ............................................... 118
SCREEN DISPLAY ............................................................................ 121
SELECT THE STARTUP DISPLAY ................................................... 122
OPERATION SOUNDS ..................................................................... 123
POST-VIEW SETTING ...................................................................... 125
WIND NOISE REDUCTION ............................................................... 126
NOISE-REDUCTION FUNCTION ...................................................... 127
ADJUST THE IMAGE QUALITY ........................................................ 128
FLICKER-REDUCTION ..................................................................... 129
DIGITAL ZOOM SETTING ................................................................. 130
MONITOR BRIGHTNESS .................................................................. 131
ADJUST THE VOLUME OF AN EXTERNAL MICROPHONE ........... 132
SCREEN LANGUAGE ....................................................................... 133
TV OUTPUT SETTING ...................................................................... 134
POWER SAVE FUNCTION ............................................................... 139
FILE NO. RESET FUNCTION ............................................................ 141
FORMATTING A CARD ..................................................................... 144
RESETTING THE CAMERA SETTINGS ........................................... 146
CHECKING THE REMAINING CARD MEMORY .............................. 147
CHECKING THE REMAINING BATTERY PACK CHARGE .............. 149
„ OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV .................................................................... 151
DIRECT PRINTING ........................................................................... 155
CONNECTING AN EXTERNAL MICROPHONE ............................... 164
„ APPENDICES
COMMONLY ASKED QUESTIONS ................................................... 165
TROUBLESHOOTING ....................................................................... 173
SPECIFICATIONS ............................................................................. 183
HINTS FOR TAKING PICTURES ...................................................... 194
3
English
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK SEARCH BY OPERATION
Your camera has an abundance of convenient features and functions. From
creating precisely the photo you want, to viewing images using various
techniques, you can locate the exact operation for your purposes in the
following table.
Shooting/recording
Basic operation
Convenient functions Additional functions
Log the date and time For more accurate
Getting started
shooting/recording
of your photos
focus
•
•
•
•
“Recording video clips”
on page 42
•
“DATE AND TIME
• “FOCUS RANGE”
SETTING” on page 35
(manual focus) on
page 79
“Shooting single shots”
on page 46
“SEQUENTIAL SHOTS”
on page 52
“Audio recording” on
page 56
Zoom in on the
subject
Set the focus to a
narrow range
•
“USING THE ZOOM” on
page 60
•
“FOCUS AREA
SETTING” on page 81
Close-up
photography
•
“FOCUS RANGE” (super
macro mode) on page 79
Optimize the photo
quality
Reduce video clip flicker
“FLICKER-REDUCTION” on page 129
•
Set the camera’s color/contrast
characteristics
•
“VIDEO CLIP MODE
(IMAGE QUALITY)
SETTING” on page 71
“STILL IMAGE MODE
(RESOLUTION)
•
“ADJUST THE IMAGE QUALITY” on page 128
•
SETTING” on page 72
Wide-screen video recording (HD mode)
“RECORDING IN THE HD MODE” on page 54
•
English
Download from Www.Somanuals.com. All Manuals Search And Downloa4d.
QUICK SEARCH BY OPERATION
Shooting/recording
Basic operation
Convenient functions Additional functions
Capture fast-moving subjects
•
“SCENE SELECT” (sports mode) on page 73
Shoot in dark conditions
•
•
•
“EXPOSURE CORRECTION” on page 63
“SHOOTING WITH THE FLASH” on page 61
“SCENE SELECT” (night view portrait mode/fireworks mode/lamp mode) on page 73
Increase the camera’s sensitivity
•
“ISO SENSITIVITY” on page 83
Photographing people
•
•
•
“SCENE SELECT” (portrait mode/night view portrait mode) on page 73
“FILTERS” (cosmetic filter) on page 76
“SHOOTING WITH THE FLASH” (red-eye reduction) on page 61
Photographing landscapes
“SCENE SELECT” (landscape mode) on page 73
•
Take a self-photo
•
“SELF-TIMER” on page 86
Make images lighter
or darker
Measure the
brightness of a
specific area
“LIGHT-MEASURING
MODE SETTING” on
page 82
•
“EXPOSURE
CORRECTION” on
page 63
•
•
“SEQUENTIAL SHOTS
MODE SETTING” (auto
bracket shots) on
page 87
Adjust the camera’s
sensitivity
•
“ISO SENSITIVITY” on
page 83
For a more precise
exposure setting
•
“EXPOSURE SETTING”
(manual exposure
control) on page 74
Change the color of
the images
“FILTERS” (monochrome
filter/sepia filter) on
page 76
Make white appear
natural
•
•
“WHITE BALANCE” on
page 84
5
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Basic operation
Convenient functions Additional functions
Getting started
viewing images
Adjust the speaker
volume
Smooth out video clip
playback
•
“Playing back a video
clip” on page 43
•
“PLAYBACK VOLUME”
on page 94
•
“SMOOTH PLAYBACK”
on page 116
•
“Viewing still images” on
page 48
Search for image/
audio data
Change the angle of
view
•
“9-image display
•
“ROTATE IMAGE” on
page 99
playback” on page 49
Magnify an image
•
“Magnifying (zooming in)
the image” on page 50
•
“Audio playback” on
page 58
Adjust the speaker volume
“PLAYBACK VOLUME” on page 94
•
Slideshow playback
“PLAYBACK MODE” on page 93
•
Adjust the monitor brightness
“MONITOR BRIGHTNESS” on page 131
•
Playback on a TV
“CONNECTING TO A TV” on page 151
Set the TV system
•
•
“TV OUTPUT SETTING”
on page 134
Data managing/processing
Convenient functions Additional functions
Search for image/audio data
“9-image display playback” on page 49
Basic operation
•
Delete data
Protect images from accidental erasure
“IMAGE PROTECT” on page 95
Format a card
“FORMATTING A CARD” on page 144
•
“ERASING DATA” on
page 97
•
•
Delete a part of a video clip and join video clips
“EDITING VIDEO CLIPS” on page 102
•
Specify the number of prints, index print, and date imprint
“PRINT SETTINGS” on page 110
•
View the settings that were in effect when the image/audio data was
recorded
•
“DISPLAYING IMAGE PROPERTIES (INFORMATION SCREEN)” on page 117
English
Download from Www.Somanuals.com. All Manuals Search And Downloa6d.
CHECKING THE INCLUDED ACCESSORIES
i Handstrap and camera case:
1 set
i SANYO Software Pack
(CD-ROM): 2
i Li-ion battery pack: 1
i Docking station: 1
i
Dedicated S-AV interface cable: 1
i
Dedicated USB interface
cable: 1
i
Dedicated component cable: 1
i
AC adaptor and power cord: 1
7
English
Download from Www.Somanuals.com. All Manuals Search And Download.
i Remote control unit: 1
i Lithium battery (CR2025) for
remote control unit: 1
i Lens cap and strap: 1
i Cable adaptor: 1
i Microphone connection
i Core: 1
cable: 1
i “SAFETY MANUAL”
(safety precautions booklet)
Please read this booklet
carefully before using the
camera.
i Quick Guide
English
Download from Www.Somanuals.com. All Manuals Search And Downloa8d.
CHECKING THE INCLUDED ACCESSORIES
How to use the accessories
k Handstrap
k Lens cap
9
English
Download from Www.Somanuals.com. All Manuals Search And Download.
k Camera case
Media cards that can be used with this camera
The type of card that can be inserted into and used with this camera is:
i SD Memory Card
English 10
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING THE MOST OUT OF YOUR CAMERA
Your camera is a digital movie camera with the ability to shoot and play back
video clips with high image quality. Video clips can be recorded at a 60 fps
frame rate with a 16:9 aspect ratio, and in addition, video clips recorded at
30 fps can be played back at 60 fps. Of course, your camera captures high-
quality still images, as you would expect, and you can even capture still
images while recording a video clip.
The docking station makes it simple to connect other devices to your camera,
providing you with the double advantages of both high functionality and ease
of use.
Wide-screen recording and playback (HD mode) (page 54)
In addition to the standard recording mode (normal mode, 4:3 aspect
ratio), your camera can both record and play back video clips in the
wide-screen mode with a 16:9 aspect ratio (HD mode).
00
0
Press the
HD/NORM
button
297
00:20:39
297
00:07:10
F3.5
1/40
F3.5
1/40
<Normal Mode Shooting
Screen>
<HD Mode Shooting
Screen>
11 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Very high image quality with 60 fps shooting (page 71)
Compared to the standard 30 fps TV images, the movement of even fast-
moving subjects will appear smooth and even in the video clips you
record at 60 fps.
VIDEO CLIP MPEG4
640x480 60fps HR
Capture still shots while recording a video clip (page 51)
Suppose that while you’re recording a video clip, there’s a scene you’d
like to keep as a still photo. Your camera makes it possible to record the
still photo without interrupting the video clip recording.
Still image shooting
button [
Video clip recording
button [
]
]
0
297
00:10:39
F3.5
1/40
English 12
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING THE MOST OUT OF YOUR CAMERA
Docking station for easy connection
The docking station simplifies those complicated connections to your
TV or computer. Just set the camera in the docking station, and you can
view your photos on your TV or computer right away.
Docking station
Printer
Dedicated USB
interface cable
To AC
adaptor
Computer
Dedicated component cable
Dedicated S-AV interface cable
TV
13 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM MAP
You can connect the camera to various devices to expand its capabilities.
TV
Remote
control unit
Computer
Cable adaptor
Printer
Docking station
AC adaptor
(supplied)
i Card reader
i DPOF-compatible printer
i Photo shop
Battery charger
(optional)
Separately sold or commercially
available SD Memory Card
English 14
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
PARTS NAMES
Camera
Front
Flash
i Extends when the flash
button [?] is pressed.
Flash unit
Lens
External
microphone
jack [MIC]
Flash button
[?]
Speaker
Remote control
sensor
Battery cover
lock
Monitor unit
Battery cover
Strap holder
Charge
indicator
Stereo
microphone
Monitor unit
15 English
Download from Www.Somanuals.com. All Manuals Search And Download.
<To open the monitor unit>
ON/OFF button
English 16
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS NAMES
Rear
Still image shooting
button [
Multi-indicator
]
Video clip
recording button
Monitor
[
]
Zoom switch
Main switch
Card slot cover
ON/OFF button
HD/NORM button
Sequential/
single button
[O/
]
SET button MENU
button
Bottom
Tripod stand hole
h Open the
monitor unit
Docking station
terminal
before mounting
the camera on a
tripod.
17 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Docking station
Front
Docking station
terminal
Operation
mode button
[
]
Rear
COMPONENT terminal
USB/AV terminal
DC IN terminal
English 18
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS NAMES
Remote control unit
<In the shooting mode>
1 Still image shooting button
2 Video clip recording button
3 SET button
4 Works the same as toggling
SET button to the left
5 Works the same as toggling
SET button up or pushing zoom
switch toward the [T] ([]]) side
6 Works the same as toggling
SET button to the right
<In the playback mode>
1 (inoperative)
2 (inoperative)
3 SET button
4 Works the same as toggling
SET button to the left
5 Works the same as toggling
SET button up
6 Works the same as toggling
SET button to the right
7 Works the same as toggling
SET button down
7
Works the same as toggling SET
button down or pushing zoom
8 CH button
switch toward the [W] ([
side
8 CH button
P])
9 MENU button
9 MENU button
* Operation shortcuts are not available from the remote control unit.
Cable adaptor
Docking station
terminal
USB/AV terminal
* The dedicated component
cable (supplied) cannot be
connected to the USB/AV
terminal.
DC IN terminal
19 English
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE CARD
Be sure to format a newly purchased card or one that was used in another
device before using it in your camera (page 144). If an unformatted card is
used, the card itself may become unusable.
1
Open the card slot cover, and
insert the card in the card slot.
Card slot
cover
2
3
Insert the card all the way in.
h Firmly insert the card until it
clicks into place.
Close the card slot cover.
Card slot
Card
English 20
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE CARD
<To remove the card...>
h To remove the card, press it down, and then release. The card will
protrude slightly, and you can then pull it out.
CAUTION
Do not attempt to forcibly remove the card.
i Doing so may damage the card or the stored data.
If the multi-indicator is flashing red...
i Never remove the card when the multi-indicator is flashing red, as doing so
may result in loss of data stored in the card.
21 English
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARING THE DOCKING STATION
The supplied docking station is used to connect your camera to a computer,
printer or TV, as well as to charge the battery pack installed in the camera.
1
Connect the docking station to a power outlet.
h Use the supplied AC adaptor and power cord.
Docking station
DC IN terminal
Supplied AC adaptor
Supplied power cord
To power outlet
English 22
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARING THE REMOTE CONTROL UNIT
The remote control unit can be used to take pictures and play them back with
the camera.
Insert the battery
Install the supplied battery (CR2025) in the remote control unit.
1
Pull out the battery case.
Battery case
2
Insert the supplied battery.
h Wipe the battery with a soft, dry
cloth before inserting it.
Battery for remote
control unit
h Insert the battery with the (+) mark
facing upward.
3
Reinsert the battery case.
23 English
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the remote control unit
The remote control unit can be used at an angle that is displaced 15
degrees horizontally from the remote control sensor on the front of the
camera, at a distance of up to 7 meters. When operating the remote
control unit, remove any object that may obstruct the path between it
and the remote control sensor.
Remote control sensor
At a distance of up to 7 meters
15° horizontally
To AC
adaptor
Infrared emitter
CAUTION
i If the remote control unit is operated in sunlight or under inverter lighting,
the remote control receiving range may become shorter. This is a
characteristic of the infrared remote control unit and is not a defect. To
avoid this malfunction when operating the remote control unit, take care to
shield the remote control sensor from strong light.
English 24
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARING THE REMOTE CONTROL UNIT
Changing the remote control code
The remote control unit will also work with other Sanyo cameras that
can be operated by infrared remote control. When more than one
camera is present, it is recommended to change the remote control
code to ensure that only the intended camera operates when the remote
control unit is used. The remote control code is set to “RC CODE 1” at
the time of purchase.
<Changing the remote control code from “RC CODE 1” to “RC CODE 2”>
1
2
3
Aim the infrared emitter at the remote control sensor on the docking
station.
Hold down the CH button and press the [J] button for about 3
seconds.
Press a button on the remote control unit and check that the camera
is receiving correctly.
h The remote control codes are retained even if the batteries in the
remote control unit or camera are replaced.
h If the remote control codes for the remote control unit and the camera
and do not match, the remote control unit cannot be used to operate
the camera.
<Resetting the remote control code to “RC CODE 1”>
1
2
Aim the infrared emitter at the remote control sensor on the docking
station.
Hold down the CH button and press the [I] button for about 3
seconds.
25 English
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARING THE POWER
Please charge the supplied battery pack before using it. Power to the camera
can also be supplied from a power outlet if the docking station or the cable
adaptor is used.
Charging the battery pack
1
While pressing the battery
cover lock, slide it (1), and
pull out the battery cover
toward the bottom of the
camera (2).
Battery
cover lock
Battery cover
2
Open the battery cover (3).
h The battery cover comes off.
English 26
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARING THE POWER
3
Insert the battery pack.
h Take care that it is positioned
correctly.
Battery pack
4
Close the battery cover.
<To remove the battery pack...>
h Raise the edge of the battery pack
to remove it.
5
6
Prepare the docking station
(page 22).
Close the camera’s monitor unit,
and set the camera in the docking
station.
Charge
indicator
h Set the camera securely, making
sure that the camera is correctly
oriented in relation to the terminal
contacts in the docking station.
h Charging begins when the camera
is set in the docking station.
h During charging, the charge
indicator is lit red. When charging
is completed, the charge indicator
turns off.
h If the charge indicator flashes red,
it indicates that the battery pack is
defective or the camera is not
correctly set in the docking station.
Reset the camera correctly in the
docking station.
Docking station terminal
h The charging time is approx. 90
minutes.
27 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Using the camera when it is set in the docking station...
i You can photograph and view images while the camera is set in the
docking station. The battery pack can be charged when the camera is in
the playback mode, but not in the shooting mode.
Do not charge the battery pack battery pack immediately after the
camera has been in continuous use for a long time
i The battery pack becomes hot when the camera is used continuously for a
long time. If you attempt to charge the battery pack in this state, the charge
indicator may flash red and it may not be possible to charge the battery
pack. Wait until the battery pack has cooled down before attempting to
charge it.
HINT
About the internal backup battery
i This camera’s internal battery serves to maintain the date and time
settings, as well as the shooting settings. The backup battery will be fully
charged when the battery pack is kept in the camera continuously for about
2 days. In the fully charged state, the backup battery will maintain the
camera settings for about 7 days.
When not using the camera for a long time, remove the battery pack.
i A small amount of power is still used even if the camera is turned off, and it
is therefore recommended that the battery pack be removed from the
camera if it is not going to be used for a long time. Note that when the
battery pack is removed for a long period, the time and date settings may
be cleared. Before using your camera again, be sure to confirm that the
camera settings are correct.
English 28
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARING THE POWER
When using a power outlet
Power to the camera can be supplied from a power outlet if the docking
station or the cable adaptor is used.
Using the docking station
Use the supplied power cord to connect the
docking station to a power outlet, and set
the camera in the docking station.
Using the cable adaptor
Connect the cable adaptor to the camera, and use the supplied power cord to
connect the cable adaptor to a power outlet.
Supplied cable adaptor
Supplied AC adaptor
To power outlet
Supplied power cord
29 English
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING THE CAMERA ON AND OFF
Turning on the camera
1
Set the main switch.
To shoot pictures:
Set to REC
Main switch
To play back images:
Set to PLAY
Recording
Monitor unit
Playback
2
3
Open the monitor unit.
Press the ON/OFF button for at
least 1 second.
h The camera turns on, and an
image appears on the monitor.
ON/OFF button
Monitor
English 30
Download from Www.Somanuals.com. All Manuals Search And Download.
TURNING THE CAMERA ON AND OFF
Turning on the camera when the power save (sleep) function is active
In order to preserve battery pack power, the power save (sleep) function
will automatically turn off the camera after one minute of no use during
shooting, or five minutes of no use during playback (factory-preset
setting).
i When the power save function is active, you can restore the power by any
of the following methods:
h Move the main switch.
h Press the ON/OFF button.
h Press the still image shooting/video clip recording button.
h Press the SET or MENU button.
h Press the zoom switch.
h Press the flash button [?].
h Press the HD/NORM button.
h Press the sequential/single button [O/
].
i
After the power save function has been active for about 1 hour, the camera
will switch to the standby mode. In this case, you can restore the power by
pressing the ON/OFF button, or by closing and then opening the monitor unit.
i When the AC adaptor is connected, the power save function will become
active about 10 minutes after the camera is turned on (factory-preset
setting).
i The user can specify the time elapsed before the power save function is
activated (page 139).
i When the camera is connected to a computer or printer, the power save
function becomes active after about 12 hours.
Turning off the camera
1
Press the ON/OFF button for at least 1 second.
h The camera turns off.
31 English
Download from Www.Somanuals.com. All Manuals Search And Download.
HINT
To immediately activate the power save function
i Press the ON/OFF button briefly to active the power save function.
About the standby mode
i To turn off the camera only briefly, you can close the monitor unit to put the
camera in the standby mode. The standby mode uses almost no power.
When the monitor unit is opened again, the camera turns on immediately
and you are ready to shoot or view images without any delay.
If the date and time setting has been completed (page 35)...
i The current time is shown on the monitor when the camera is turned on.
CAUTION
If the K icon appears...
i When a picture is taken, the date and time it was captured are recorded
with it. If the date and time settings have not been completed (page 35),
the date and time cannot be recorded with the captured images. For this
reason, immediately after the camera is turned on, the “SET DATE AND
TIME” reminder briefly appears, after which the K icon is shown on the
Shooting Screen. To have the date and time recorded with the images,
please complete this setting before capturing images.
English 32
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION BUTTONS
The procedures to change the camera settings, choose images, etc., are
performed by using the SET button to control the monitor display. This
operation is used very frequently, so it is best to become familiar with it right
away.
1
2
Turn on the camera.
Press the MENU button.
h The Menu Screen appears.
<Select the icon above or below>
To select the icon above,
toggle the SET button up.
SET button
MENU button
VIDEO CLIP MPEG4
640x480 30fps SHQ
PHOTO RESOLUTION
2592x1944 (5M-S)
To select the icon below,
toggle the SET button down.
SCENE SELECT
FULL AUTO
33 English
Download from Www.Somanuals.com. All Manuals Search And Download.
<Select the icon to the left or right>
To select the icon to the right,
toggle the SET button to the right.
VIDEO CLIP MPEG4
640x480 60fps HR
To select the icon to the left,
toggle the SET button to the left.
VIDEO CLIP MPEG4
640x480 60fps HR
<Actuate the selected icon>
Press the SET button. The selected
icon moves to the left end of the
lineup.
VIDEO CLIP MPEG4
640x480 60fps HR
English 34
Download from Www.Somanuals.com. All Manuals Search And Download.
DATE AND TIME SETTING
The camera will record the date and time an image or audio recording is
taken so that you can display them during playback. Therefore, before
capturing images, make sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 24, 2006
1
2
Display the Option Screen (page 118).
Select the clock set icon C, and
press the SET button.
CLOCK SET
h The Clock Set Screen appears.
h The current date and time settings
are shown.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
DATE
TIME
DISP
EXIT
2006/08/01
00:00
Y / M / D
h To return to the Option Screen,
press the MENU button, or select
“EXIT” and press the SET button.
35 English
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Set the date.
1 Select “DATE”.
CLOCK SET
2 Press the SET button.
h The Set Date Screen appears.
3 Set the date to “2006/12/24”.
h The date is set in the following
order: Set the year → Set the
month → Set the day.
DATE
2006/12/24
h Toggle the SET button left or
right to select year, month or
day. Toggle the SET button up
or down to increase or decrease the number.
4 Press the SET button.
Set the clock.
1 Select “TIME”.
CLOCK SET
2 Press the SET button.
h The Set Time Screen appears.
3 Set the time to “19:30”.
h The time is set in the following
order: Set the hour → Set the
minute.
TIME
19:30
h A 24-hour clock is used for the
time display.
4 Press the SET button.
English 36
Download from Www.Somanuals.com. All Manuals Search And Download.
DATE AND TIME SETTING
5
Set the order in which the date is
displayed during playback.
1 Select “DISP”.
CLOCK SET
2 Press the SET button.
h The Set Date Format Screen
appears.
3 Toggle the SET button up or down.
h Toggle the SET button up to
change the displayed date order
as follows:
DISP
Y / M / D
year/month/day → month/day/year → day/month/year
Toggle the SET button down to change it in the reverse order.
4 Press the SET button.
6
Select “EXIT”, and press the SET button.
h The date and time setting is completed, and you are returned to the
Option Screen.
h To return to the Shooting or Playback Screen, press the MENU button.
HINT
i Under normal conditions, while the battery pack is being replaced, an
internal battery will maintain the date and time settings. However, there is a
small chance the settings may be lost (The backup will last for about 7
days). It is recommended to check that the date and time settings are still
correct after replacing the battery pack and before shooting or recording of
any type (follow steps 1 and 2).
To correct the date and time settings
i After steps 1 and 2, select the line of the setting that you want to change,
press the SET button, and follow the steps in the respective paragraphs
above to change the setting.
37 English
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
BEFORE TAKING PICTURES
How to hold the camera
Hold the camera securely, keeping your elbows close to your body and
making sure the camera is stable.
Correct hold
Incorrect hold
A finger is blocking the
lens or flash.
<Holding the camera>
Example 1:
Grip the camera by wrapping the fingers
of the right hand, from the little finger to
the middle finger, around the camera,
and hook the index finger above the
lens.
Example 2:
Grip the camera by wrapping the fingers
of the right hand, from the little finger to
the index finger, around the camera.
Make sure that the lens and flash are not blocked by your fingers or the strap.
HINT
i Images captured in the still image shooting mode can be rotated when
they are played back (page 99).
i When the optical zoom is used or when the autofocus is operating, the
image may appear to waver, but this is not a malfunction.
English 38
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE TAKING PICTURES
Using the autofocus
The autofocus will work in almost all situations; however, there are
certain conditions that may cause the autofocus function to not work
properly. If the autofocus function is not working properly, set the focus
range to capture images (page 79).
k Conditions that may cause incorrect focus
The following examples are some of the situations where the autofocus
function may not work.
i Subjects with low contrast, very bright
subjects at the center of the image or
dark subjects or locations
Use the focus-lock function to lock the
focus on an object with contrast at the
same distance as the desired subject.
i Subjects without vertical lines
Use the focus-lock function to lock the
focus while framing the subject vertically,
then re-orient the camera to compose a
horizontally framed image.
39 English
Download from Www.Somanuals.com. All Manuals Search And Download.
The following examples are some of the situations where the autofocus
function may work, but not as desired.
i When both near and far objects are
present
Use the focus-lock function to lock the
focus on an object at the same distance as
the desired subject, then reposition the
camera to compose the picture.
i Fast-moving subjects
Use the focus-lock function to lock the
focus on an object at the same distance as
the desired subject, then reposition the
camera to compose the picture.
English 40
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE TAKING PICTURES
Hints for taking pictures
Muting the operation sounds
i The operation sounds that are generated, for example, when the still image
shooting button, MENU button or SET button is pressed, as well as the
audio guidance when you switch the mode, can be muted (page 123).
Where is the image and audio data saved?
i All the image and sound data is recorded on the card installed in the
camera.
Taking pictures in backlight conditions...
i When taking pictures with the light coming from behind the subject, due to
the characteristics of the lens, light lines or ghost patterns (flare
phenomenon) may appear in the captured image. In this situation, it is
recommended that you avoid taking pictures with the subject lit from behind.
While the image data is being recorded...
i While the multi-indicator is flashing red, the image data is being written to
the memory, during which time it is not possible to capture another image.
Another image can be captured after the flashing red indicator turns off.
However, even when the multi-indicator is flashing red, depending on the
camera’s internal memory remaining capacity, in some cases the next
image can be captured about 2 seconds after shooting.
Checking the last image shot (instant review)
i After shooting a picture, you can immediately view it by pressing the SET
button once.
i During instant review of a video clip, normal play, reverse play and pause,
etc. are available (page 44).
i If you wish to delete the image (for a video clip, it must be in the pause or
stop mode), toggle the SET button up to access the delete function.
i You can view other images while the instant review display is showing by
toggling the SET button to the left or right.
i Cancel the instant review display by toggling the SET button down.
41 English
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CLIP RECORDING AND PLAYBACK
Recording video clips
1
Turn on the camera.
If the monitor unit is closed
Monitor unit
Video clip recording
button [
]
→
Open the monitor unit.
If the camera is in the power
save mode Press the ON/
OFF button.
→
2
3
Set the main switch to
REC.
Press the video clip
recording button [
].
h Recording begins.
h It is not necessary to
keep the shutter release
button pressed while
shooting.
Main switch
h When the remaining
recording time available
for the currently recording
clip becomes little, a
countdown of the
remaining recording time
appears on the display.
Recording time
00:00:15
5
4
End the recording.
h Press the video clip
recording button again to
stop recording.
Available recording time
remaining
English 42
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CLIP RECORDING AND PLAYBACK
Playing back a video clip
5
Set the main switch to PLAY.
h The video clip just recorded is
shown on the monitor.
Main switch
6
Press the SET button.
h Playback of the video clip begins.
SET button
<Example: After recording a
video clip: Normal mode>
<Example: After recording a
video clip: HD mode>
43 English
Download from Www.Somanuals.com. All Manuals Search And Download.
To do this...
Do this
Normal forward playback Press the SET button.
Stop playback
Pause
During playback, toggle the SET button down.
During playback, press the SET button or
toggle the SET button up.
During accelerated playback, toggle the SET
button up.
Duringforward After pausing playback, toggle the SET button
To play back
one image at
a time (single-
frame step)
playback
During reverse After pausing playback, toggle the SET button
playback to the left.
Duringforward After pausing playback, press and hold the
playback SET button to the right.
During reverse After pausing playback, press and hold the
to the right.
Slow
playback
playback
SET button to the left.
During forward playback, toggle the SET
button to the right.
* The playback speed changes each time the
SET button is toggled to the right, as follows:
Forward
playback
Normal playback
→
2x
→
5x
→
10x
→
15x
Toggle the SET button to the left to resume
To
normal playback speed.
During forward playback, toggle the SET
button to the left.
accelerate
playback
* The playback speed changes each time the
SET button is toggled to the left, as follows:
15x ← 10x ← 5x
Toggle the SET button to the right to resume
normal playback speed.
Reverse
playback
Return to normal playback
speed
Press the SET button.
Louder: During playback, push the zoom
switch toward the [T] side.
Softer: During playback, push the zoom
Adjusting the volume
switch toward the [W] side.
When you are finished using the camera...
i Press the ON/OFF button to turn the camera off.
English 44
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CLIP RECORDING AND PLAYBACK
HINT
Adjusting the monitor brightness
i While the Shooting Screen is active, You can quickly access the screen for
adjusting the brightness of the monitor by pressing the MENU button for at
least 1 second.
The focus can be locked.
i The autofocus can be set to a fixed focus during video clip recording if you
toggle the SET button up. When the autofocus is fixed, the p icon
appears on the monitor.
i When the focus range (page 79) setting is changed, the focus lock is
released.
The data for a video clip is very large.
i Therefore, be aware that if the video clip is uploaded to a computer to be
played back, the computer may not be able to play back the video fast
enough, making it appear jerky. (The video will always be displayed
properly on the monitor or a television.)
i Depending on the card, shooting may end even before the possible
shooting time indicated.
Display the video clip playback point
i During video clip playback, press the MENU button for at least 1 second to
display a bar showing the current playback point in the video clip.
i Press the MENU button for about 1 second to cancel the bar.
CAUTION
During video clip playback, the sound of a motor is audible...
i During recording, the sound of the optical zoom movement or autofocus
movement was recorded. This is not a malfunction.
If no audio is heard...
i The audio is not played back when the video clip is played back in the
frame-by-frame, fast playback or reverse playback mode.
45 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CAPTURING AND PLAYING BACK STILL IMAGES
Shooting single shots
1
Press the ON/OFF button to
turn the camera on.
Main switch
2
3
Set the main switch to REC.
Press the still image shooting
button [
].
1 Press the still image
shooting button halfway.
h The autofocus operates,
and the image is focused
(focus lock).
2 Continue to gently press
the still image shooting
button all the way.
h The shutter releases and
the image is captured.
h You can view the captured
image on the monitor by
keeping the still image
shooting button depressed
when you capture the
image (post-view
Still image shooting
button [
]
[page 125]).
1
2
F3.5
1/40
Target mark
Shutter speed
Aperture
English 46
Download from Www.Somanuals.com. All Manuals Search And Download.
CAPTURING AND PLAYING BACK STILL IMAGES
HINT
Target mark
What is the camera focusing on?
i
A target mark
&
on the monitor shows the
area the camera is focusing on.
i
The camera automatically determines the
correct focus by measuring from 5
different focus points within the shooting
area. If the target mark is at a position
that is different from the point you wish to
focus on, you can refocus, for example,
by changing the shooting angle.
F3.5
1/40
i The large target mark appears when
the camera focuses on a wide area in
the center of the screen.
Shutter speed
Aperture
The shutter speed and aperture are
displayed
i
When the camera focuses and the target mark appears, at the same time, the
shutter speed and aperture settings are also displayed. You can use them as a
reference when shooting.
If the camera shake icon > appears...
i During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera shake becomes high, the
camera shake icon may appear on the monitor. In this case, use a tripod to
stabilize the camera when shooting, or set the flash operation mode to
automatic (page 61).
i When shooting with the scene select function set to the fireworks +
mode, the camera shake icon always appears, but this is normal.
47 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing still images
1
Set the main switch to PLAY.
h An image is displayed on the
monitor.
Main switch
2
Select the image you wish to
view.
To display the previous image,
toggle the SET button to the left.
To display the next image, toggle
the SET button to the right.
h Display the desired image.
SET button
100-0001
English 48
Download from Www.Somanuals.com. All Manuals Search And Download.
CAPTURING AND PLAYING BACK STILL IMAGES
9-image display playback
1
2
Set the main switch to PLAY.
Main switch
Zoom switch
Push the zoom switch toward
the [W] ([P]) side.
h The 9-image display appears.
3
Select the image to play back.
h Toggle the SET button up,
down, left or right to move the
orange frame to the desired
image, and press the SET
button.
Instead of pressing the SET
button, you can push the zoom
switch toward the [T] ([]])
side to show the image full
screen.
SET button
Orange frame
Video clip
Still image
101
0001
0002
0005
0008
0003
0006
0009
0004
0007
Audio data
Image number
Folder number
HINT
i The 9-image multi-playback display can also be accessed by selecting P
on the Playback Setting Screen.
49 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Magnifying (zooming in) the image
1
2
Display the image that you want to magnify.
h For a video clip, pause playback at the place you want to magnify.
Push the zoom switch toward the [T]
Zoom
113%
([]]) side.
h Magnification is enabled.
h The image is magnified, and the
central portion of image is
displayed.
Move
100%
Zoom I/O
Press shutter to save
h Toggle the SET button to view
different parts of the magnified
image.
To magnify:
Magnification increases each time
the zoom switch is pushed toward
the [T] ([]]) side.
To return to normal size:
Magnification decreases each time
the zoom switch is pushed toward
the [W] ([P]) side.
h Press the SET button to return to
the normal (100%) view.
HINT
The magnified portion of the image can be saved as a separate image.
i Press the still image shooting button. The magnified portion is saved as a
new still image.
English 50
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP
You can capture a still image (a single-shot) while recording a video clip.
1
Press the ON/OFF button for at
least 1 second to turn the camera
on.
Video clip recording
button [
]
Still image shooting button
[
]
2
3
Set the main switch to REC.
Press the video clip recording
button [
].
4
5
When you see a scene you’d like
to capture as a still image, press
the still image shooting button
[
].
Main switch
End the recording.
h Press the video clip recording
button to stop recording.
00:00:09
CAUTION
i
i
When shooting a still image while recording a video clip, the flash does not operate.
When shooting a still image while recording a video clip, the display briefly pauses,
and then returns to the video clip display after the still image is captured.
i
i
If the still image resolution is set to
image is captured.
v, it automatically changes to
r
and the
When the remaining video recording time becomes approximately 50 seconds, it
will no longer be possible to capture a still image while recording a video clip. The
exact remaining recording time at which this occurs will differ depending on the
subject and on the video clip mode setting (page 71). If you intend to capture a still
image while recording a video clip, it is suggested that you take note of the
remaining video recording time.
51 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SEQUENTIAL SHOTS
Your camera is capable of capturing both standard sequential shots and auto
bracket shots (sequential images as the exposure changes). The procedure
below explains how to take standard sequential shots. For information
concerning auto bracket shots, please see page 87.
1
Press the ON/OFF button for at
least 1 second to turn the
camera on.
Still image shooting button
[
]
2
3
Set the main switch to REC.
Press the sequential/single
button [O/
].
h The camera switches to the
sequential shots mode, and
the sequential shots icon P
appears on the monitor.
h Each time the sequential/
single button is pressed, the
camera switches between the
single-shot mode and the
sequential shots mode.
Sequential/
single button
4
Press the still image shooting
button.
h Shooting begins. Shooting
continues as long as the still
image shooting button is kept
pressed.
Sequential
shots icon
[O/
]
00
108
00:03:53
h The maximum number of
sequential shots is 10 frames
when the still image resolution
is set to A or [, and 6
frames at other resolution
settings.
F3.5
1/18
English 52
Download from Www.Somanuals.com. All Manuals Search And Download.
SEQUENTIAL SHOTS
5
Release the still image shooting button.
h Shooting ends.
h The playback procedure for images in a sequential shots series is the
same as for single-shot still images (page 48).
HINT
About the focus when shooting sequential shots
i When sequential shots are captured, the autofocus operates when the still
image shooting button is pressed halfway, fixing the focus.
i Shooting sequential shots at a resolution of v is not possible. If the
resolution is set to v, it automatically changes to s.
Can the self-timer and/or flash be used?
i The self-timer and flash do not operate when shooting sequential shots.
53 English
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING IN THE HD MODE
In addition to the standard video clip recording mode (normal mode, aspect
ratio 4:3), your camera can also record video clips in the wide-screen mode
(HD mode) with an aspect ratio of 16:9.
Switching between the normal mode and HD mode
1
Press the ON/OFF button for at
least 1 second to turn the
camera on.
HD/NORM button
2
3
Set the main switch to REC.
Press the HD/NORM button.
h The monitor display changes to
the 16:9 aspect ratio HD mode.
h Each time the HD/NORM
button is pressed, the mode
switches between the HD
mode and the normal mode.
4
Press the video clip recording
button [
].
41
00:01:00
F3.5
1/31
<HD mode>
English 54
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING IN THE HD MODE
Outline of the HD Mode Shooting Screen
In the HD mode, the lighter area on the screen indicates the recording area.
Normal mode capture area
HD mode
capture area
00
41
0000::0011::0000
F3.5
1/8
55 English
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO RECORDING AND PLAYBACK
Your camera can make audio recordings and play them back.
Audio recording
1
2
Set the main switch to REC.
Press the MENU button.
h The menu display appears.
VIDEO CLIP MPEG4
640x480 30fps SHQ
3
From the video clip mode menu,
select the audio memo icon <,
and press the SET button.
h The audio recording mode is
enabled.
Remaining time
41
01:10:36
h The menu display is canceled if
the MENU button is pressed.
F3.5
1/40
English 56
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO RECORDING AND PLAYBACK
4
Press the video clip recording
button.
h Audio recording begins. During
recording, < appears in the
monitor.
00:09:45
It is not necessary to continue
pressing the video clip recording
button while shooting.
h The maximum time for recording a
continuous audio memo is about 13
hours.
5
End the recording.
h Press the video clip recording button again to stop recording.
HINT
You can capture a still image during an audio recording
i Note, however, that if the resolution in the still image mode is set to k, it
automatically changes to r and the image is captured.
57 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio playback
1
2
Display the desired audio data.
00:00:00
Play back the recording.
Start forward playback:
Press the SET button.
Pause: During playback, press the
SET button, or toggle the SET
button up. During fast forward
or fast reverse, toggle the SET
button up.
Stop playback:
During playback, toggle the SET button down.
Fast forward/fast reverse:
h Fast forward/fast reverse playback is possible at 2x (forward only),
5x, 10x and 15x.
h Toggle the SET button to the left or right during playback to
activate fast forward/fast reverse.
h The playback speed changes each time the SET button is toggled
to the left or right.
Fast forward (toggle the SET button to the right)
2x → 5x → 10x → 15x
* Toggle the SET button to the left to return to normal speed.
Fast reverse (toggle the SET button to the left)
15x ← 10x ← 5x
* Toggle the SET button to the right to return to normal speed.
CAUTION
If no audio is heard...
i The audio is not played back when the audio memo is played back in the
fast playback or fast reverse mode.
English 58
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING AND PLAYBACK WITH
THE REMOTE CONTROL UNIT
The remote control sensor on your camera makes it possible to capture
images and play them back using the supplied remote control unit.
1
2
Prepare the remote control unit (page 23).
Turn the camera on, and set the main switch to REC or PLAY.
h Set the main switch to REC for shooting, or to PLAY for playback.
3
4
Aim the remote control unit at the camera’s remote control sensor.
h Open the monitor unit.
Press the buttons on the remote control unit to operate the camera.
59 English
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
You can specify whether or not the digital zoom is enabled (page 130).
1
2
Point the camera lens at the
subject.
Zoom switch
Press [T] or [W] on the zoom
switch to compose the desired
image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the monitor.
h When moving the optical zoom,
press the zoom switch lightly to
zoom slowly, and press more
strongly to zoom quickly.
h When the optical zoom factor is at
maximum, zooming stops
temporarily. When the zoom
switch is pressed toward the [T]
side again, the mode changes to
the digital zoom mode and
zooming continues.
Monitor
Zoom bar
Magnification
When both
optical and digital
zoom are enabled
Optical zoom
Digital zoom (yellow)
When optical
zoom only is
enabled
Pointer
3
Take the picture.
For video clip recording, see page 42.
For shooting single shots, see page 46.
For shooting sequential shots, see page 52.
English 60
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING WITH THE FLASH
The flash is used not only for taking pictures where there is insufficient light,
but also when the subject is in shade or in backlight conditions. Your camera’s
flash has four modes of operation (automatic flash mode, forced flash mode,
flash off mode, and red-eye reduction mode). Select the flash mode that is
appropriate for the surrounding conditions. The flash can be enabled only
when taking single-shot still images.
1
2
Set the main switch to REC.
Press the flash button to
extend the flash.
Flash button
h The flash setting appears
on the monitor.
No flash indication:
The camera will detect
the subject brightness
and use the flash only
when required. In a
backlight situation, if only
the center of the image is
very dark, the flash will
operate to compensate
(auto flash).
40
00:02:47
F3.5
1/40
Flash setting
Download from Www.Somanuals.com. All Manuals Search And Download.
61 English
m:The flash will operate with every image captured regardless
of the conditions. Use this setting under backlight conditions,
when the subject is in shade, under fluorescent lighting
conditions, etc. (forced flash).
l:The flash will not operate even in dark situations. Use this
setting when capturing an image in a location where flash
photography is prohibited, or when shooting a night
landscape scene (flash off).
J:The camera will detect the subject brightness and use the
flash only when required. At this time the flash will operate in
a manner that reduces the red reflection (“red-eye”) in the
subject’s eyes (red-eye reduction).
3
4
Press the flash button to set the flash mode.
h Each time the flash button is pressed, the flash mode changes.
h Display the icon for the desired flash mode.
Press the still image shooting button.
h The picture is snapped and the flash operates according to the
selected mode.
HINT
i The flash cannot be used during video clip recording or in the sequential
shots mode.
English 62
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE CORRECTION
When capturing images, you can make the image lighter or darker.
1
2
Set the main switch to REC.
h If the Shooting Setting
Screen is displayed, press
the MENU button to exit it.
Main switch
While the Shooting Screen is
displayed, toggle the SET
button to the right.
h The exposure correction bar
appears.
3
Toggle the SET button to the
left or right to adjust the
exposure.
h The exposure setting
numerical value is shown at
the left end of the exposure
bar.
h The exposure can be set to a
value from –1.8EV to
+1.8EV.
SET button
MENU button
h The exposure correction bar
is canceled when the MENU
button or the SET button is
pressed.
40
00:02:47
Pointer
Exposure
correction bar
63 English
Download from Www.Somanuals.com. All Manuals Search And Download.
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the Option Screen is accessed.
i When the main switch is set to PLAY.
i After the power is turned off.
English 64
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING
PAGE 1 (BASIC SETTINGS)
DISPLAYING THE SHOOTING SETTING SCREENS
The Shooting Setting Screens are used to adjust your camera’s shooting
settings. The Shooting Setting Screens are organized into two displays:
PAGE 1 and PAGE 2. The PAGE 1 settings (page 67) cover the basic
shooting settings, and the PAGE 2 settings (page 69) provide you with more
detailed settings.
1
2
3
Turn on the camera (page 30).
Set the main switch to REC.
Main switch
Press the MENU button.
h The Shooting Setting Screen
appears.
h Pressing the MENU button again
will cancel the Shooting Setting
Screen.
About the HELP display
When the Shooting Setting Screen icon is
selected, the HELP display appears,
showing the function of the selected icon
and the shooting mode(s) for which it is
effective.
MENU button
HELP display
VIDEO CLIP MPEG4
640x480 30fps SHQ
<Applicable to the video clip
recording mode>
VIDEO CLIP MPEG4
640x480 30fps SHQ
<Applicable to the still image
shooting mode>
<Applicable to both shooting
modes>
65 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING THE PAGE
Switch from PAGE 1 to PAGE 2, or vice versa, depending on how you wish to
use your camera.
1
2
Display a Shooting Setting Screen.
Toggle the SET button to the left.
h The Shooting Setting Screen PAGE
changes.
PAGE indication
h Each time the SET button is toggled
to the left, the PAGE changes.
VIDEO CLIP MPEG4
640x480 30fps SHQ
<Example: Shooting Setting
Screen: PAGE 1>
IMAGE STABILIZER
VIDEO VIEW
<Example: Shooting Setting
Screen: PAGE 2>
English 66
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAYING THE SHOOTING SETTING SCREENS
Overview of the Shooting Setting Screens
PAGE 1
VIDEO CLIP MPEG4
640x480 30fps SHQ
67 English
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Video clip mode menu (page 71)
<In the normal mode>
Night view portrait photography
Fireworks photography
Lamp photography
/:
+:
Q:
Record at 640 × 480 pixels, 30
frames per second, very high
image quality.
b:
4 Manual exposure setting
menu (page 74)
Record at 640 × 480 pixels, 60
T:
a:
l:
d:
<:
frames per second.
The exposure is set automatically.
@:
T:
Record at 640
×
480 pixels, 30 frames per
Set the shutter speed and ND
filter settings.
Set the aperture size and ND
filter settings.
Set the aperture size, shutter
speed and ND filter settings.
second, high image quality.
Record at 320 × 240 pixels, 30
g:
frames per second.
Record at 320 × 240 pixels, 15
,:
frames per second.
Make an audio recording.
5 Filter menu (page 76)
<In the HD mode>
No filter
&:
Record at 1,280 × 720 pixels, 30
U:
Cosmetic filter selected
%:
frames per second, very high
image quality.
Monochrome filter selected
W:
Sepia filter selected
,:
Record at 1,280
×
720 pixels, 30 frames
V:
per second, high image quality.
Make an audio recording.
6 In the single-shot/video clip
recording modes: Self-timer
menu (page 86)
<:
2
Still image mode menu (page 72)
Self-timer off
N:
y:
Shoot image at 2,592
×
1,944
r:
resolution (about 5 million pixels
[normal compression])
Shooting begins 2 seconds after the
still image shooting button or video
clip recording button is pressed.
Shooting begins 10 seconds
after the still image shooting
button or video clip recording
button is pressed.
Shoot image at 3,680
×
2,760
k:
resolution (about 10 million pixels)
x:
Shoot image at 2,592
×
1,944
s:
resolution (about 5 million pixels [low
compression])
6 In the sequential shots mode:
Sequential shots mode menu
(page 87)
Shoot at 2,592
×
1,464 resolution
(approx.3.8 million pixels)
Shoot image at 1,600 1,200
resolution (about 2 million pixels)
Shoot image at 1,280 960
resolution (about 1.2 million pixels)
Shoot image at 640 480
resolution (about 300,000 pixels)
8:
t:
A:
[:
×
h
Appears only in the sequential shots mode.
×
Standard sequential shots
P:
AE shift sequential shots (auto
bracket series)
’:
×
7 Option icon (page 118)
h Displays the Option Screen.
8 PAGE display (page 66)
9 HELP display (page 89)
0 Remaining battery power
(page 149)
3 Scene select menu (page 73)
Full auto photography
Sports photography
Portrait photography
Landscape photography
=:
a:
>:
+:
* When you specify multiple functions that cannot be simultaneously enabled,
the function which was last set becomes the active setting, and the other
settings accordingly change automatically.
English 68
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAYING THE SHOOTING SETTING SCREENS
PAGE 2
IMAGE STABILIZER
VIDEO VIEW
0
69 English
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Image stabilizer menu
5 ISO sensitivity menu
(page 77)
(page 83)
p: Shoot using the video clip
t: Auto sensitivity
field of view display.
(corresponds to ISO 50 to
200)
q: Shoot using the still image
field of view display.
*: Corresponds to ISO 50
u: Corresponds to ISO 100
v: Corresponds to ISO 200
w: Corresponds to ISO 400
]: Image stabilizer function off
2 Focus menu (page 79)
-: All ranges mode
*: Normal mode
6 White balance menu (page 84)
-: Manual mode
>: White balance is
automatically adjusted
depending on ambient
lighting
+: Super macro (close-up)
mode
3
Focus mode menu (page 81)
r: For photography in fair
K: 5-point range finder focus
weather (sunny) conditions
setting
o: In overcast conditions
C: Spot focus setting
p: Under fluorescent lighting
4 Light-measuring mode (EXP
q: Under incandescent
MEASURE) menu (page 82)
n: Multi-section light-
measuring setting
W: Center-weighted light-
measuring setting
Y: Spot light-measuring
setting
lighting
]: For setting the most
accurate white balance
7 Option icon (page 118)
h Display the Option Screen.
8 PAGE display (page 66)
9 HELP display (page 89)
0 Remaining battery power
(page 149)
* When you specify multiple functions that cannot be simultaneously enabled,
the function which was last set becomes the active setting, and the other
settings accordingly change automatically.
English 70
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CLIP MODE (IMAGE QUALITY) SETTING
When it comes to video clips, a larger number of pixels and a higher frame
rate means better image quality and smoother playback. On the other hand,
the file size becomes large and uses more memory. Set the image quality to a
setting that’s right for your purpose.
1
2
Display the PAGE 1 Shooting Setting Screen (page 65).
Select the video clip mode menu.
Resolution
(units: pixels)
Frame
rate
Setting
Image quality
U
V
b
T
a
l
d
Very high image quality
High image quality
HD mode
1,280 × 720 30 fps
30 fps Very high image quality
640 × 480
60 fps
30 fps
30 fps
High image quality
High image quality
High image quality
Normal
mode
320 × 240
15 fps Standard image quality
HD mode/
normal
mode
<
—
—
—
3
Select the desired icon from the video clip mode menu, and press
the SET button.
h This completes the video clip mode setting.
CAUTION
When editing video clips...
i In order for video clips to be joined, they must have been photographed in
the same mode.
i Video clips that were photographed in different modes cannot be joined.
71 English
Download from Www.Somanuals.com. All Manuals Search And Download.
STILL IMAGE MODE (RESOLUTION)
SETTING
By setting the still image resolution (pixels) to a higher setting, image detail is
enhanced for a smoother, finer picture. However, the file size also becomes
large and uses more memory. Select the resolution setting that suits your
purpose.
1
2
Display the PAGE 1 Shooting Setting Screen (page 65).
Select the still image mode menu.
Resolution
Applicable shooting
Setting
Compression
(units: pixels)
mode(s)
Standard
compression
k
3,680 × 2,760
Single-shot
s
r
8
G
A
[
2,592 × 1,944
2,592 × 1,944
2,592 × 1,464
1,600 × 1,200
1,280 × 960
640 × 480
Low compression
Single-shot/
sequential shots
Standard
compression
3
Select the desired icon from the still image resolution menu, and
press the SET button.
h This completes the still image resolution setting.
English 72
Download from Www.Somanuals.com. All Manuals Search And Download.
SCENE SELECT
You can select from various preset settings (aperture, shutter speed, etc.) for
specific shooting conditions.
1
2
Display the PAGE 1 Shooting Setting Screen (page 65).
Select the scene select menu.
=: The camera automatically makes the optimum settings suitable for
the surrounding conditions (full auto).
a: Capture a split-second image of a fast-moving subject (sports
mode).
>: Enhance the 3D feeling of the subject by blurring the background
(portrait mode).
+: For beautiful shots of distant scenery (landscape mode).
/: Photograph the subject while keeping the background night
scenery (night view portrait mode: For single-shot shooting, video
clip recording only).
+: For capturing fireworks at night (fireworks mode: For single-shot
shooting, video clip recording only).
Q: Photograph in low-light conditions (lamp mode: For single-shot
shooting, video clip recording only).
3
Select the desired icon from the scene select menu, and press the
SET button.
h This completes the scene select function setting.
h To return to normal photography, select = from the scene select
menu, and press the SET button.
HINT
i When capturing images using the lamp Q, fireworks + or night view
portrait / setting, use a tripod or other method to stabilize the camera.
i A table showing the limitations for settings corresponding to scene select
icons other than = is on page 182.
73 English
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE SETTING
Various settings—including shutter speed, aperture size, the ND filter ON/
OFF status—can be set by the user.
1
2
Display the PAGE 1 Shooting Setting Screen (page 65).
Select the manual exposure menu.
@: The optimum shutter speed and aperture size are set according to
the brightness of the subject (aperture and shutter variable program
AE).
Example: For simple shooting with minimum setup, using the
camera’s automatic settings.
T: This allows you to set a specific shutter speed and enable/disable
the ND filter. The camera automatically sets an appropriate aperture
size based on this setting (shutter speed priority AE).
Example: To set a fast shutter speed for capturing a clear image
of a fast-moving object, or to set a slow shutter speed to shoot
the flow of a background scene.
By using the flash in combination with a slow shutter speed, you
can create beautiful photographs of people against a
background night scene (slow synchro photography).
g: This allows you to set a specific aperture size and enable/disable
the ND filter. The camera automatically sets an appropriate shutter
speed based on this setting (aperture priority AE).
Example: To open the aperture for portraits with a blurred
background (for a shallow field depth), or to close the aperture
for a clear foreground and background (for a deep field depth).
,: This allows you to set a specific shutter speed, aperture size and
enable/disable the ND filter (manual exposure control).
Example: When shooting in a dark location without using the
flash, set the shutter to stay open for a longer time (slow shutter).
When used for shooting nighttime scenes, you can capture lights
flowing across the image.
English 74
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE SETTING
3
Select the desired icon from the
manual exposure menu, and press
the SET button.
ND filter
<If T, g or , was selected>
1 Toggle the SET button up or down
to select ND filter, aperture value
or shutter speed.
2 Toggle the SET button left or right
to change the setting for the
selected parameter.
F3.5
1/1500
Shutter speed
Aperture
4
Press the SET button.
h This completes the exposure
setting.
HINT
i To prevent the effects of camera shake at slow shutter speeds, it is
recommended to use a tripod or other method to stabilize the camera.
i A slow shutter speed may be useful for photographing in a darker
environment, but noise in the image may be increased.
i To minimize noise in the image, enable the noise reduction function
(page 127).
i The manual exposure setting automatically becomes @ if the scene
select function is active or if the mode is set to the AE shift sequential shots
mode.
i In the sequential shots mode, the shutter speed is faster than 1/15 sec.
i When a video clip is recorded in a video mode other than T with the
shutter speed set to slower than 1/29 sec., the shutter speed during
recording is 1/30 sec. And when a video clip is recorded in the T video
mode with the shutter speed set to slower than 1/59 sec., the shutter
speed during recording is 1/60 sec.
75 English
Download from Www.Somanuals.com. All Manuals Search And Download.
FILTERS
The filter feature changes image characteristics such as color tones, to apply
unique effects to the photographed image.
1
2
Display the PAGE 1 Shooting Setting Screen (page 65).
Select the filter menu.
&: No filter is used (none).
%: Skin tones are enhanced in close-up shots (cosmetic filter).
W: Snap black-and-white photos (monochrome filter).
,: Create a sepia-tone photo (sepia filter).
3
Select the desired icon from the filter menu, and press the SET
button.
h This completes the filter setting.
h To return to normal photography, select & from the filter menu, and
press the SET button.
HINT
i A table showing the limitations for settings corresponding to filter icons
other than & is on page 182.
English 76
Download from Www.Somanuals.com. All Manuals Search And Download.
MOTION COMPENSATION (IMAGE STABILIZER)
Your camera can minimize a jittery picture by compensating for unintentional
hand motion (video clips only).
1
2
Display the PAGE 2 Shooting Setting Screen (page 65).
Select the image stabilizer menu.
p: Compensate for camera shake during video clip recording. The
field of view does not change when the video clip recording button
is pressed, so this setting is convenient when shooting mostly
video clips (video clip field of view display).
q: Compensate for camera shake during video clip recording. The
field of view does not change when the still image recording button
is pressed, so this setting is convenient when shooting mostly still
images (still image field of view display).
]: Disengages the motion compensation function (OFF).
3
Select the desired icon from the image stabilizer menu, and press
the SET button.
h This completes the image stabilizer setting.
HINT
If the motion compensation does not seem to be working...
i Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i If the digital zoom (page 130) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
i When using a tripod, the docking station or other means to stabilize the
camera, please turn the motion compensation function off ]. If the
motion compensation function is enabled when it is not actually needed, it
may result in an image that appears unnatural.
77 English
Download from Www.Somanuals.com. All Manuals Search And Download.
<Concerning the changing field of view when motion compensation is
enabled>
i When the motion compensation is set to ON, the field of view during
recording standby differs from the recordable field of view as shown below.
i When set to the motion compensation q setting, the video clip recording
range is as shown in the recording standby screen.
During still image
shooting
Display during
recording standby
During video clip
recording
For p setting
For q setting
Video clip
recording area
For ] setting
i When the still image shooting resolution is set to [ or A and the
scene selection function to =, a, > or + (page 73), a still image
captured during video clip recording will have the same field of view as the
video clip.
English 78
Download from Www.Somanuals.com. All Manuals Search And Download.
FOCUS RANGE
1
2
Display the PAGE 2 Shooting Setting Screen (page 65).
Select the focus range menu.
h When shooting a subject at a medium to far distance, by setting the
focus range to *, you will find it both easier and faster to focus.
-: Wide end: 10 cm (3.94 in.) to infinity
Tele end: 1 m (3.28 ft.) to infinity (total range mode)
*: 80 cm (31.50 in.) to infinity (normal mode)
-: The focus can be manually set to any distance from 1 cm
(0.39 in.) to 40 m (131.23 ft.), as well as to infinity (manual
focus).
+: 1 cm (0.39 in.) to 1 m (3.28 ft.) (super macro mode: wide end
only)
h When the focus range is set to *, + or -, the corresponding
indication appears on the monitor.
3
Select the desired icon from the focus range menu, and press the
SET button.
h This completes the focus range setting.
HINT
i From the Shooting Screen, you can quickly change the focus range setting
by toggling the SET button down.
i When the focus range is set to super macro +, the zoom is temporarily
set to the wide end.
i You can lock the focus by toggling the SET button up.
79 English
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the manual focus
1
2
Select the manual focus icon - from the focus menu, and press
the SET button.
Press the SET button.
h The focus distance adjustment bar
appears.
12
00:00:15
3
Toggle the SET button to the left or
right to adjust the focus distance,
and press the SET button.
h The focus distance is set, and you
are returned to the Shooting
Screen.
1cm
HINT
About the focus range
i The focus distance indication shows the distance between the lens surface
and the subject.
i In some cases there may be a slight variance between the distance
(numerical figure) you set in the manual focus mode and the actual
distance.
About zoom movement when using the manual focus
i If the focus distance is set to 70 cm (27.56 in.) or less, the zoom changes
to the largest setting that is suitable for that focus distance.
i When the focus distance is set to 70 cm (27.56 in.) or less, the zoom will
function only within the range at which the image is focused.
English 80
Download from Www.Somanuals.com. All Manuals Search And Download.
FOCUS AREA SETTING
You can choose from the following 2 types of autofocus (still image shooting
only):
5-point range finder focus:
The correct focus is determined from 5 different focus points within the
shooting area visible on the monitor. When the image is focused, a target
mark & appears.
Spot focus:
The camera focuses on the subject in the center of the monitor.
1
2
Display the PAGE 2 Shooting Setting Screen (page 65).
Select the focus mode menu.
K:5-point range finder focus is
40
00:02:47
selected.
C:Spot focus is selected.
3
Select the desired icon from the
focus mode menu, and press the
SET button.
F3.5
1/40
h The focus area is set.
h When the spot focus setting is
Focus mark
selected, the focus mark + appears
in the center of the monitor.
81 English
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT-MEASURING MODE SETTING
You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The light is modulated after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The light is modulated for the entire image after measuring from mostly the
center area.
Spot light-measuring:
You can compose the picture and capture the image after first modulating the
light only at the center spot of the monitor.
1
2
Display the PAGE 2 Shooting Setting Screen (page 65).
Select the light-measuring mode (EXP MEASURE) menu.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
3
Select the desired light-measuring
mode from the light-measuring
mode (EXP MEASURE) menu, and
40
00:02:47
press the SET button.
h This completes the light-measuring
mode setting.
h When spot light-measuring is
F3.5
selected, the light-measuring spot
1/40
mark
appears in the center of
the monitor.
Light-measuring spot mark
English 82
Download from Www.Somanuals.com. All Manuals Search And Download.
ISO SENSITIVITY
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
1
2
Display the PAGE 2 Shooting Setting Screen (page 65).
Select the ISO sensitivity menu.
t: Sets the ISO sensitivity automatically (equivalent to ISO 50 to 200
[video clip recording mode: ISO 200 to 800]).
*: Sets the sensitivity to ISO 50 equivalent
(video clip recording mode: ISO 200).
u: Sets the sensitivity to ISO 100 equivalent
(video clip recording mode: ISO 400).
v: Sets the sensitivity to ISO 200 equivalent
(video clip recording mode: ISO 800).
w: Sets the sensitivity to ISO 400 equivalent
(video clip recording mode: ISO 1600).
3
Select the desired icon from the ISO sensitivity menu, and press the
SET button.
h This completes the ISO sensitivity setting.
HINT
i By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase or the images may be irregular.
i If you capture a still image during video clip recording with the ISO
sensitivity set to w, the still image will be captured with the ISO
sensitivity setting automatically changed to v.
i The exposure correction (page 63) is not available when the ISO
sensitivity is set to w.
83 English
Download from Www.Somanuals.com. All Manuals Search And Download.
WHITE BALANCE
This camera automatically adjusts the white balance under most lighting
conditions. However, if you want to specify the lighting conditions or change
the overall tone of the image, the white balance can be manually set.
1
2
Display the PAGE 2 Shooting Setting Screen (page 65).
Select the white balance menu.
>: The camera will make the white balance adjustment automatically
based on the natural and artificial light conditions.
r: For shooting outside on a sunny day.
o: For shooting outside on a cloudy day.
p: For shooting inside under fluorescent lighting.
q: For shooting inside under incandescent lighting.
]: This setting is used for a more accurate white balance using the
existing light source (one push). Please use it when the light source
cannot be identified, for example.
Setting procedure
1 Select the ] icon and press the SET button.
h The ] icon moves to the left end of the line.
2 Fill the entire screen with a plain white card (or piece of
paper, etc.), and press the SET button.
h This completes the white balance setting.
h It is not necessary to complete step 3.
English 84
Download from Www.Somanuals.com. All Manuals Search And Download.
WHITE BALANCE
3
Select the desired icon from the white balance menu, and press the
SET button.
h This completes the white balance setting.
h Once the white balance setting is programmed for the ] icon, it is
retained even if another white balance setting (>, r, o, p, or
q) is selected. If you changed to another setting, whenever you
select the ] icon and press the SET button, the previously
programmed setting is recalled.
HINT
To cancel the white balance setting
i Perform step 1, select >, and then press the SET button.
85 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF-TIMER
1
2
Display the PAGE 1 Shooting Setting Screen (page 65).
Select the self-timer menu.
N:Turns off the self-timer function.
y:Turns on the self-timer function. The image is captured about 2
seconds after the still image shooting button or video clip recording
button is pressed.
x:Turns on the self-timer function. The image is captured about 10
seconds after the still image shooting button or video clip recording
button is pressed.
3
Select the desired icon from the self-timer menu, and press the SET button.
h This completes the self-timer setting.
HINT
To pause or cancel the self-timer function...
i If the video clip recording button or still image shooting button is pressed
again before the shutter is released, the self-timer countdown temporarily
stops. Press the video clip recording button or still image shooting button
one more time to restart the self-timer.
i To cancel self-timer photography, select the N icon from the self-timer
menu, and press the SET button.
i After the self-timer picture is snapped, the self-timer is automatically reset
to off N.
When x is selected...
i When the still image shooting button or
video clip recording button is pressed,
the multi-indicator will blink for about 10
seconds, and then the image is captured.
Also, 4 seconds before the shutter
releases, the indication shown in the
illustration appears on the monitor.
i If you swivel the monitor unit towards the
subject, the self-timer indication will be
visible to the subject.
CAUTION
i The self-timer cannot be used in the sequential shots mode.
English 86
Download from Www.Somanuals.com. All Manuals Search And Download.
SEQUENTIAL SHOTS MODE SETTING
This camera features two types of sequential shots.
Standard sequential shots P:
Takes standard sequential shots (page 52).
Auto bracket shots I:
A series of images is captured while the exposure (shutter speed and
aperture size) automatically changes.
Normal
exposure
–0.6EV
–1.2EV
+1.2EV
+0.6EV
1
2
Press the sequential/single
Sequential/single button
button [O/
] to select the
sequential shots mode.
Display the PAGE 1 Shooting
Setting Screen (page 65).
87 English
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select the sequential shots mode menu.
P: Standard sequential shots
I: Auto bracket shots
Select the desired icon from the sequential shots menu, and press
the SET button.
h This completes the sequential shots mode setting.
HINT
About the maximum number of sequential shots
i The maximum number of frames in a sequential shots series differs
depending on the still image shooting mode.
i Sequential shots photography is not available at resolution v.
Still image shooting mode
Maximum frames
s
r
8
G
A
[
6
10
How many shots in the auto bracket series?
i Five images are captured in the auto bracket shots mode.
i However, when the ISO sensitivity is set to w, three images (normal
exposure → +0.6EV → –0.6EV) are captured.
Can the flash be used?
i The flash does not operate when shooting sequential shots.
English 88
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
PAGE 1 (BASIC SETTINGS)
DISPLAYING THE PLAYBACK SETTING SCREENS
The Playback Setting Screens are used to adjust your camera’s playback
settings. The Playback Setting Screens are organized into two displays:
PAGE 1 and PAGE 2. The PAGE 1 settings (page 91) cover the basic
playback settings, and the PAGE 2 settings (page 92) provide you with more
detailed settings.
1
2
3
Turn on the camera (page 30).
Set the main switch to PLAY.
Main switch
Press the MENU button.
h The Playback Setting Screen
appears.
h Pressing the MENU button
again will cancel the
Playback Setting Screen.
About the HELP display
When the PLAYBACK MENU icon is
selected, the HELP display appears,
showing the function of the selected
icon.
MENU button
HELP display
PLAYBACK MODE
Set to play all
or to play 1 clip
89 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SWITCHING THE PAGE
Switch from PAGE 1 to PAGE 2, or vice versa.
1
2
Display a Playback Setting Screen (page 89).
Toggle the SET button to the left.
h The Playback Setting Screen
PAGE indication
changes to the other PAGE.
h Each time the SET button is
toggled to the left, the PAGE
changes.
PLAYBACK MODE
Set to play all
or to play 1 clip
<Example: Playback Setting
Screen: PAGE 1>
ROTATE
Rotate image
<Example: Playback Setting
Screen: PAGE 2>
English 90
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAYING THE PLAYBACK SETTING SCREENS
Overview of the Playback Setting Screens
PAGE 1
PLAYBACK MODE
Set to play all
or to play 1 clip
1 Playback method setting
(page 93)
h Select continuous playback or
single-frame playback.
4 Data protect setting (page 95)
h Protect data from accidental
erasure.
5 Erase (page 97)
2 Multi-playback (page 49)
h Display images in the 9-frame
multi-display format.
h Delete images from the card
memory.
6 Option icon (page 118)
h Display the Option Screen.
7 PAGE display (page 90)
8 HELP display (page 89)
9 Remaining battery power
(page 149)
3 Playback volume control
(page 94)
h Adjust the playback volume for
video clips and audio data.
91 English
Download from Www.Somanuals.com. All Manuals Search And Download.
PAGE 2
ROTATE
Rotate image
1 Rotate image (page 99)
h Rotate still images.
2 Resize (page 100)
h Reduce the resolution of a still
image.
3 Extract still image (page 101)
h Extract a still image from a
video clip.
6 Smooth playback (page 116)
h Video clips are played back
smoothly.
7 Option icon (page 118)
h Display the Option Screen.
8 PAGE display (page 90)
9 HELP display (page 89)
0 Remaining battery power
(page 149)
4 Video clip edit (page 102)
h Edit video clips.
5 Printing instructions
(page 110)
h Specify the printing
instructions (DPOF settings).
English 92
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MODE
Images can be viewed continuously (slideshow playback) or you can choose
to show single images.
1
2
Display the PAGE 1 Playback Setting Screen (page 89).
Select the playback method icon
4, and press the SET button.
PLAYBACK MODE
h The Playback Method Screen
appears.
PLAY ALL:Play back images in
PLAY ALL
1sec
slideshow fashion.
1 CLIP:
Display only the selected
image (pages 43 and 48).
1 CLIP
3
4
Select the desired playback mode.
<When PLAY ALL is selected>
h The screen to set the time that each
image is displayed appears.
1 Toggle the SET button to the right
to select playback time.
2 Toggle the SET button up or down
to specify the time that each image
is shown.
PLAYBACK MODE
Time per image
1sec
PLAY ALL
3 Press the SET button.
Press the SET button.
h The display time is set, and you are returned to the Playback Setting
Screen.
93 English
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK VOLUME
Adjust the playback volume for video clips and audio data.
1
2
Display the PAGE 1 Playback Setting Screen (page 89).
Select the playback volume icon
PLAY VOLUME
Z, and press the SET button.
h The volume control bar appears.
3
Toggle the SET button left or right to
adjust the volume, and press the
SET button.
VOLUME SETTING
1
h The volume is set, and you are
returned to the Playback Setting
Screen.
HINT
i During video clip or audio memo playback, if you move the zoom switch,
the volume control bar will appear, allowing you to adjust the volume.
English 94
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE PROTECT
Prevent accidental erasure of image and audio data.
1
2
Display the data that you want to protect from accidental erasure,
and display the PAGE 1 Playback Setting Screen (page 89).
Select the protect icon A, and
PROTECT
press the SET button.
h “Lock?” appears.
h If the protect mode has already
been enabled for the data, then
“Unlock?” appears.
Lock?
YES
EXIT
3
Toggle the SET button up or down
to select “YES”, and press the SET
button.
PROTECT
h The protect mode is set for the
data.
Unlock?
h The protect mark B indicates that
the data is locked.
h To return to the Playback Setting
YES
EXIT
Screen, press the MENU button.
95 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
i Even if the protect mode is set for certain data files, they will be erased if
the card is reformatted (page 144).
HINT
To select a different image in steps 2 and 3...
i Toggle the SET button to the left or right.
To cancel the protect mode for an image...
i Display the desired data and repeat steps 1 to 3. The protect mark B will
disappear and the protect mode is canceled.
English 96
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASING DATA
Data can be erased one at a time or all at once.
1
2
Display the PAGE 1 Playback Setting Screen (page 89).
Select the erase icon c, and press
DELETE
the SET button.
h The Erase Mode Screen appears.
DELETE SINGLE:Erases one data at
DELETE SINGLE
a time.
DELETE ALL
EXIT
DELETE ALL:
EXIT:
Erases all the data
from the card.
Returns to the
Playback Setting
Screen.
3
Toggle the SET button up or down the select the erase mode, and
press the SET button.
h The Erase Confirmation Screen appears.
<DELETE SINGLE>
h Toggle the SET button to the left or right to select the data you wish to
erase.
<DELETE ALL>
h Toggle the SET button to the left or right confirm that all data are to be
erased.
97 English
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select “YES”, and press the SET button.
<DELETE SINGLE>
h The currently displayed image is deleted.
h To erase other data, select the data, and press the SET button.
h To return to the Playback Setting Screen, press the MENU button.
<DELETE ALL>
h The Erase Confirmation Screen again appears. To erase the data,
select “YES”, and press the SET button. When data erase is
completed, “NO IMAGE” is shown.
CAUTION
i Data which is protected from accidental erase cannot be erased. To erase
protected data, set the protect setting for the data to off (page 95), and
then follow the data erase procedure.
HINT
i You can also access the One Erase Confirmation Screen from the
Playback Screen by toggling the SET button up.
English 98
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTATE IMAGE
Captured still images can be rotated to the correct orientation for viewing.
1
2
Display the still image you wish to rotate, and display the PAGE 2
Playback Setting Screen (page 89).
Select the rotate icon L, and
ROTATE
press the SET button.
h The Rotate Image Screen appears.
RIGHT
RIGHT:Rotates image clockwise
90 degrees.
LEFT
EXIT
LEFT: Rotates image counterclockwise
90 degrees.
EXIT: Return to the Playback Setting
Screen.
3
Select “RIGHT” or “LEFT”, and press the SET button.
h Each time the SET button is pressed, the image is rotated another 90
degrees.
HINT
i An image for which the protect mode has been enabled cannot be rotated.
To rotate a protected image, cancel the protect mode before beginning the
rotate image procedure (page 95).
99 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING IMAGE SIZE (RESIZE)
A captured image can be resized to a smaller size and saved as a separate
image.
1
2
Display the still image whose size you want to change, and display
the PAGE 2 Playback Setting Screen (page 89).
Select the resize icon I, and
RESIZE
press the SET button.
h The Resize Screen appears.
(3680x2760)
(1600x1200)
(1280x960)
(640x480)
EXIT
3
4
Toggle the SET button up or down to select the new image size.
2M (1600 × 1200): The saved image will be 1,600 × 1,200 pixels.
1.2M (1280 × 960): The saved image will be 1,280 × 960 pixels.
0.3M (640 × 480): The saved image will be 640 × 480 pixels.
EXIT:
Return to the Playback Setting Screen.
Press the SET button.
h Resizing begins.
HINT
Why can’t the image be resized?
i An image can be resized only to a smaller (or the same) size, not to a
larger size. An image captured at resolution 8 cannot be resized.
English 100
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTRACTING A STILL IMAGE FROM A VIDEO CLIP
You can select one image (scene) from a video clip, copy it, and save it as a
still image (the original data remains unchanged).
1
Play back a video clip, and pause at the point you wish to copy and
save.
2
3
Display the PAGE 2 Playback Setting Screen (page 89).
Select the extract still icon 7, and
EXTRACT STILL
press the SET button.
h The screen to extract an image
4:3
appears.
[4:3]: The currently displayed image
16:9
will be saved as a still image
with an aspect ratio of 4:3.
EXIT
[16:9]: The currently displayed image
will be saved as a still image
with an aspect ratio of 16:9.
(This selection is available only
for video clips recorded in the
HD mode.)
EXIT: You are returned to the
Playback Setting Screen.
4
Select “YES” and press the SET button.
h The image is extracted.
HINT
When an image from a video clip recorded in the HD mode is saved with
an aspect ratio of 4:3…
i The still image that is generated will be a 4:3 (640 × 480 pixels) VGA image
with black bars at the top and bottom of a 640 × 360-pixel picture.
101 English
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING VIDEO CLIPS
You can trim away unwanted portions from a video clip and save it as a new
video clip (video clip cutting [extracting]). You can also join two video clips
together and save them as one separate clip (“joining”).
Procedure to cut (extract) a portion of a video clip
1
2
Specify the frames
(1, 2) where the
video clip is to be
cut.
(A)
(B)
(C)
J
Extract the specified portion.
[Two ways to cut the
video clip]
i Trim away portions
(A) and (C), and
save portion (B).
i Delete portion (B),
and join portions (A)
and (C).
i The original
video clip is
not affected
(You can also choose to erase the original video clip when the new clip is
saved.)
English 102
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING VIDEO CLIPS
Procedure to join video clips
Specify the video clip that will come first.
J
Specify the video clip that you wish to
append (join).
J
Join the video clips.
i The two video clips are saved together as a
separate video clip.
i
The original video clips are not affected.
(You can also choose to erase the
original video clips when the new clip is
saved.)
CAUTION
Caution when editing video clips
i When editing video clips, do not move the main switch. If you move the
main switch while editing video clips, not only will the editing not be
properly completed, but the original video clip may also be erased.
i As the number or size of the video clips increases, the card memory may
become full, making it impossible to edit the video clips. In this case, you
will need to free some of the memory on the card, either by deleting data
that are no longer necessary (page 97), or by selecting “OVERWRITE”
when saving edited video clips (pages 106 and 108).
103 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Video clip cutting (extracting)
1
2
3
Display the video clip from which you wish to extract a segment.
Display the PAGE 2 Playback Setting Screen (page 89).
Select the edit video icon k, and
EDIT VIDEO
press the SET button.
h The Edit Video Screen appears.
CUT
JOIN
EXIT
4
Select “CUT” and press the SET
button.
h The Cutting Screen appears.
Start point
CUT
00:01:30
Press shutter to save
English 104
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING VIDEO CLIPS
5
Specify the start point of the extract.
h Use the procedure below to specify the frame from which the video
clip extract will start.
h Play the video clip until approximately the desired point, pause the
video clip, then play the video clip one frame at a time, stopping at the
start point of the extract. This will be the first frame of the extract.
h If the start point of the video clip is also the start point of the extract,
proceed to step 6.
<Procedure>
Play:
After pausing playback, press and hold the SET button to the right for
about 2 seconds for forward playback, or to the left for reverse
playback.
Pause:
During playback, press the SET button.
Accelerated playback:
During playback, toggle the SET button to the left or right to change
the playback speed.
Single frame:
After pausing playback, toggle the SET button to the right to move
forward one frame, or to the left to move back one frame.
6
Toggle the SET button up.
h The start point of the video clip
Approximate playback time
extract is set, and the screen to
specify the end point appears.
h Specify the end point of the extract
by following the same procedure as
in step 5.
CUT
00:01:10
<When joining the first and latter
portions>
1 Toggle the SET button down.
h The portion to be deleted
switches to the extracted
portion.
Press shutter to save
End point
Portion to be deleted
h Each time the SET button is
toggled down, the sections to
delete and the sections to save are reversed.
2 Specify the end point of the extract. The frame following the end point
of the extract will be the start point of the latter portion to be joined.
105 English
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press the still image shooting
button [O].
h A screen appears for you to select
either to save the edited video clip
as a new (separate) file, or to delete
the original video clip and replace it
with the edited video clip.
CUT
SAVE AS NEW
OVERWRITE FILE
REVIEW CLIP
EXIT
SAVE AS NEW:
The edited video clip will be saved
as a new file. The original video clip
remains unchanged.
OVERWRITE FILE:
The original video clip will be deleted. Only the edited video clip will be
saved.
REVIEW CLIP:
Play back the edited video clip before saving it.
8
Select the desired option, and press the SET button.
h Editing starts.
h When editing ends, you are returned to the Playback Setting Screen.
HINT
i If the original video clip is protected, even if you select “OVERWRITE FILE”
in steps 8 and press the SET button, the original video clip will not be
erased. If you want it to be erased, you will need to first remove the
protection (page 95).
i If the “Card full” message appears, you will need to free some of the
memory by deleting data that you do not need to keep.
CAUTION
Warning concerning the battery pack remaining charge
i During the editing of lengthy video clips, the time to process the large
amount of data can become quite long. To avoid problems caused by the
battery pack becoming depleted in the middle of video clip editing, before
starting to edit be sure that a sufficiently charged battery pack is installed
in the camera, or connect the AC adaptor.
i It is recommended that a computer be used to edit long video clips.
English 106
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING VIDEO CLIPS
Joining two video clips
CAUTION
i Video clips that were photographed in different modes cannot be joined.
1
2
Display the PAGE 2 Playback Setting Screen (page 89).
Select the edit video icon k, and
EDIT VIDEO
press the SET button.
h The Edit Video Screen appears.
CUT
JOIN
EXIT
3
Select “JOIN” and press the SET
button.
h The 6-image playback display for
video clips appears.
SET
Select a clip
Press shutter to save
107 English
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Move the orange frame to the
video clip you wish to join, and
press the SET button.
h The specified video clip is labeled
with a number.
h Up to 9 video clips can be
selected.
h To cancel a selection and remove
the number label from a video
clip, select the video clip and
press the SET button.
Approximate playback time
SET
Select a clip 00:00:36
Press shutter to save
Number
Press the still image shooting
button [O].
JOIN
SAVE AS NEW
h A screen appears for you to select
either to save the joined video clip
as a new (separate) file, or to delete
the original video clips and replace
them with the joined video clip.
SAVE AS NEW:
OVERWRITE FILE
REVIEW CLIP
EXIT
The joined video clip will be saved
as a new file. The original video
clips remain unchanged.
OVERWRITE FILE:
The original video clips will be deleted. Only the joined video clip will
be saved.
REVIEW CLIP:
Play back the joined video clip before saving it.
English 108
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING VIDEO CLIPS
6
Select the desired option, and press the SET button.
h Editing starts.
h When editing ends, you are returned to the Playback Setting Screen.
HINT
i If the original video clip is protected, even if you select “OVERWRITE FILE”
in steps 7 and press the SET button, the original video clip will not be
erased. If you want it to be erased, you will need to first remove the
protection (page 95).
i If the “Card full” message appears, you will need to free some of the
memory by deleting data that you do not need to keep.
CAUTION
Warning concerning the battery pack remaining charge
i During the editing of lengthy video clips, the time to process the large
amount of data can become quite long. To avoid problems caused by the
battery pack becoming depleted in the middle of video clip editing, before
starting to edit be sure that a sufficiently charged battery pack is installed
in the camera, or connect the AC adaptor.
i It is recommended that a computer be used to edit long video clips.
109 English
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT SETTINGS
In addition to using your printer to print out still images captured with your
camera, as with conventional film, you can have prints made at shops offering
digital print services. Moreover, this camera is DPOF-compatible, so you can
use the camera to specify the number of prints, whether or not the date is
displayed on the print, and also to specify an index print.
Display the Printing Instructions Screen
1
2
Display the PAGE 2 Playback Setting Screen (page 89).
Select the printing instructions icon
PRINT INSTRUCTIONS
b, and press the SET button.
h The Printing Instructions Screen
appears.
ALL IMAGES
EACH IMAGE
INDEX
ALL IMAGES:
The specified print settings apply to
all the still images on the card.
EACH IMAGE:
ALL CLEAR
EXIT
The print settings are specified for
each individual image.
INDEX:
All the still images are printed as
miniature images (thumbnail
images), several images on one
print.
ALL CLEAR:
Clear all the print settings. This
cannot be selected if no print
settings have been made for the
image.
EXIT:
Return to the Still Image Playback
Setting Screen.
English 110
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT SETTINGS
HINT
Printing a single frame from a video clip
i To print with a printer or have the digital print service shop print out a still
image from a video clip, you must first save it (save frame) as a still image
(page 101).
About the DPOF format
i DPOF (Digital Print Order Format) is a print order format. You can connect
your camera to a DPOF-compatible printer to produce your prints. You can
also set the print settings for the desired images, and then have the
reserved images printed automatically (page 161).
About the finished prints
i Images that have been rotated will be printed in their original orientation.
i The quality of the print output will differ depending on the print service and
printer used.
111 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying date imprinting and print quantities
You can specify printing instructions for each individual image (EACH
IMAGE), or apply the printing instructions to all the images on the card
(ALL IMAGES).
1
2
Display the Printing Instructions Screen (page 110).
Select EACH IMAGE or ALL
IMAGES.
ALL IMAGES:
PRINT INSTRUCTIONS
ALL IMAGES
EACH IMAGE
INDEX
The printing instructions are applied
to all the still images on the card.
EACH IMAGE:
The printing instructions are applied
only to the image currently
displayed.
ALL CLEAR
EXIT
3
Press the SET button.
h The Date/Copies Print Screen
appears.
h If “EACH IMAGE” was selected,
toggle the SET button to the left or
right to display the desired image to
print.
EACH IMAGE
----/--/--
0 copy
:
:
COPIES
1
h The printing instructions that are
currently active for the displayed
image are shown. You can toggle
the SET button to the left or right to
confirm the printing instructions for
each image.
OK
DATE
English 112
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT SETTINGS
4
Specify whether the date is
displayed on the print, and the
number of prints.
Quantity
<Specify the number of prints>
h Toggle the SET button up or down.
h The quantity indication
changes.
EACH IMAGE
----/--/--
0 copy
:
:
h Display the desired number of
prints.
COPIES
OK
1
DATE
Dated prints
<Specify dated prints>
h Push the zoom switch toward the
[T] or [W] side.
EACH IMAGE
2006/12/24
0 copy
:
:
h Each time the zoom switch is
moved, the date indication is
switched on or off.
h For images that were captured
when the camera’s clock was
not set (page 35), the date
display appears as [--/--/--], and
dated prints are not possible.
COPIES
OK
1
DATE
Dated prints:
Turn the date indication on.
Undated prints:
Turn the date indication off.
Printing instructions
5
6
Press the SET button.
h The printing instructions for the
requested print quantities and
dated prints are stored.
EACH IMAGE
2006/12/24
1 copy
:
:
Press the MENU button.
h The display returns to the Printing
Instructions Screen.
COPIES
1
OK
DATE
113 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Index print
Printing out many small images on one sheet is called an “index print”.
This is convenient for use as a list of the images you have captured.
1
2
3
Display the Printing Instructions Screen (page 110).
Select “INDEX”.
Press the SET button.
INDEX PRINT
h The Index Print Screen appears.
YES:
Specify an index print copy.
EXIT:
Set index print?
Discontinue the setting procedure,
and return to the Printing
Instructions Screen.
YES
EXIT
4
Select “YES”, and press the SET
button.
h This completes the setting for the
index print. You are returned to the
Printing Instructions Screen.
HINT
To cancel the index print setting
i Follow steps 1 and 2, select “YES” in step 3, and press the SET button.
English 114
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINT SETTINGS
Clearing all the printing instructions
Delete the printing instructions for all images.
1
2
3
Display the Printing Instructions Screen (page 110).
Select “ALL CLEAR”.
Press the SET button.
h The Confirm All Clear Screen appears.
YES:
Clear the printing instructions for all images.
EXIT:
Cancel the clear procedure and return to the Printing Instructions
Screen.
4
Select “YES”, and press the SET
button.
h All the printing instructions are
cleared and you are returned to the
ALL CLEAR
:2006/12/24
:2 copies
Printing Instructions Screen.
Clear all instructions?
YES
EXIT
115 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SMOOTH PLAYBACK
Suppress the video flicker that occurs, for example, when playing back video
clips that were recorded with camera moving fast.
1
2
Display the PAGE 2 Playback Setting Screen (page 89).
Select the smooth playback O
SMOOTH PLAYBACK
icon, and press the SET button.
h The Smooth Playback Screen
appears.
ON:
ON
Activate smooth playback
OFF:
OFF
Deactivate smooth playback
3
Select “ON”, and press the SET
button.
h This completes the smooth playback setting.
HINT
i Depending on the recording conditions, the smooth playback effect may be
insignificant in some cases.
i This feature does not work for video clips that were recorded in the HD
mode.
i This feature does not work when the dedicated component cable is
connected to the TV for playback.
English 116
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAYING IMAGE PROPERTIES (INFORMATION SCREEN)
On the Information Screen you can check what the settings were when an
image was captured.
1
2
Display the desired image.
INFO
Press the MENU button for at
least 1 second.
h The Information Screen
appears.
h If the MENU button is
pressed again, the
Information Screen is
canceled.
2006.12.25 19:30
1 Video clip mode settings
2 Image or sound number
3 Protect setting
4 File size
<Video clip data>
100-0002
INFO
5 Shooting or recording
time
6 Exposure correction
setting
7 Aperture value
8 Shutter speed
9 Remaining battery
charge
2006.12.25 19:30
0 Date and time of image
A Still image resolution
settings
<Still image data>
100-0003
INFO
256KB
00:00:11
AAC
2006.12.25 19:30
<Audio data>
117 English
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTION SETTINGS
OPTION SETTINGS
DISPLAYING THE OPTION SCREEN
The Option Screen is used to adjust various camera settings.
1
2
3
Turn on the camera, and press the MENU button.
h The Shooting or Playback Setting Screen appears.
Toggle the SET button up or down
to select the PAGE indication.
PAGE indication
Option icon
Toggle the SET button to the right,
and select the option icon.
h The Option Screen appears.
h The Option Screen is canceled if
the MENU button is pressed.
4
Toggle the SET button down.
h The menu appears.
1/3
CLOCK SET
INFO DISPLAY
STARTUP DISPLAY
OPERATION BEEP
POST VIEW
WIND NOISE REDUC.
English 118
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAYING THE OPTION SCREEN
Overview of the Option Screen
CLOCK SET
INFO DISPLAY
STARTUP DISPLAY
OPERATION BEEP
POST VIEW
WIND NOISE REDUC.
NOISE REDUCTION
IMAGE SETTINGS
FLICKER REDUCT
DIGITAL ZOOM
BRIGHTNESS
EXT MIC VOLUME
LANGUAGE
TV OUTPUT SETTINGS
POWER SAVE
FILE NO. RESET
FORMAT
RESET SETTINGS
119 English
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Date and time setting
0
A
B
Digital zoom setting (page 130)
h Enable or disable the digital
zoom.
Monitor brightness (page 131)
h Adjust the brightness of the
monitor.
External microphone
(page 132)
h Adjust the input level of a
microphone connected to the
camera.
(page 35)
h
Set the camera’s internal clock.
2 Screen display (page 121)
h Specify what information is
displayed on the Playback
Screen.
3 Startup display (page 122)
h Select the screen display that
appears when the camera is
turned on.
C Screen language (page 133)
h Select the language in which
the monitor messages are
displayed.
4 Operation sounds setting
(page 123)
h Select the operation sounds
that are produced when the
camera’s buttons are pressed,
and adjust the operation
sound volume.
D TV output settings (page 134)
h
Select the type of video signal
that is output from the camera’s
USB/AV terminal.
5 Post-view (page 125)
h Specify how long the captured
image is displayed on the
monitor after the still image
shooting button is pressed.
6 Wind noise reduction setting
(page 126)
E
Power save function (page 139)
F File number reset (page 141)
h Select the file number reset
function.
G Card format (page 144)
h Use the camera to format the
memory card.
H Reset camera settings
(page 146)
h Reset the camera to the
factory-preset settings.
I Remaining battery power
(page 149)
h Set the wind noise reduction
function on or off.
Noise-reduction (page 127)
h Set the noise-reduction
function on or off.
Image quality adjustment
(page 128)
7
8
h Adjust the image quality during
shooting.
9 Flicker-reduction (page 129)
h Set the flicker-reduction
function on or off.
* Icons 7 through H are displayed when you toggle the SET button up or
down to scroll.
English 120
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN DISPLAY
Specify what information is displayed on the Playback Screen.
1
2
Display the Option Screen (page 118).
Select the info display icon j, and
press the SET button.
h The Screen Display Screen
appears.
DATE & TIME:
Set the capture-date display to ON
or OFF.
INFO DISPLAY
DATE & TIME
COUNTER
SHOW ALL
OFF
COUNTER:
Set the video clip playback time
display to ON or OFF.
SHOW ALL:
Display the capture date and
playback time (for video clips).
OFF:
Do not display the capture date and
playback time.
3
Select the desired setting, and
press the SET button.
h This completes the screen display setting.
HINT
i During progressive output playback (page 154), the date and time, as well
as the counter, are not displayed.
121 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECT THE STARTUP DISPLAY
The startup display is the display that appears on the monitor when the
camera is turned on.
1
2
Display the Option Screen (page 118).
Select the startup display icon +,
and press the SET button.
h The Startup Display Setting Screen
appears.
STARTUP DISPLAY
DATE & TIME
OFF
DATE & TIME:
The camera’s date and time setting
is shown.
OFF:
No startup display.
3
Select the desired setting, and press the SET button.
h The selected startup display is set.
English 122
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION SOUNDS
Use this menu to set the confirming audio signals when the camera is turned
on/off or when the operation buttons (still image shooting button, SET button,
MENU button, etc.) are pressed, to adjust the operation sound volume, and to
enable/disable the audio guide.
1
2
Display the Option Screen (page 118).
Select the operation beep icon ?,
and press the SET button.
h The Operation Beep Setting Screen
appears.
h The current settings are shown on
the screen.
h If “ALL OFF” is selected and the
SET button pressed, all the
operation sounds are muted.
h If “EXIT” is selected and the SET
button pressed, you are returned to
the Option Screen.
OPERATION BEEP
TURN ON/OFF : ON
SHUTTER
KEY SW
: D
: A
AUDIO GUIDE : ON
CHANGE SETTINGS
ALL OFF
EXIT
TURN ON/OFF:
Mute or enable the sound that is
produced when the power is turned
on or off.
SHUTTER:
Select the sound that is produced
when the still image shooting button
is pressed, or when a photo is
taken using the self-timer.
KEY SW:
Select the sound that is produced
when the SET button, MENU
button, etc. are pressed.
AUDIO GUIDE:
Mute or enable the camera’s audio
help guide.
123 English
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select “CHANGE SETTINGS”, and
press the SET button.
h The screen to change the settings
appears.
OPERATION BEEP
TURN ON/OFF
SHUTTER
ON
D
KEY SW
A
AUDIO GUIDE
OPERATION VOL
EXIT
ON
4
Toggle the SET button up or down
to select the desired setting, and
press the SET button.
h The screen to select operation
sounds appears.
<If “TURN ON/OFF” or “AUDIO GUIDE” is selected>
h The respective screen to enable or disable the sound appears.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
ON: Activates the sound.
OFF: Deactivates the sound.
<If “SHUTTER” or “KEY SW” is selected>
h The screen to select the operation sounds appears.
h Select from 6 different sounds (A to F).
h You can press the still image shooting button to preview the
selected operation sound.
h If “OFF” is selected, no sound is produced.
h Toggle the SET button up or down to select the desired setting,
and press the SET button.
<If “OPERATION VOL” was selected>
h The screen to select the volume for the operation sounds appears.
h You can select an operation sound volume from 1 (minimum) to 7
(maximum).
h Toggle the SET button up or down to select the volume, and press
the SET button.
5
Select “EXIT”, and press the SET button.
h The operation sound settings are completed.
HINT
i If you keep the MENU button pressed and turn on the power, the screen to
turn the operation sounds ON/OFF appears at once. You may find this a
convenient procedure to disable the operation sounds in places you do not
want them to be audible.
English 124
Download from Www.Somanuals.com. All Manuals Search And Download.
POST-VIEW SETTING
Specify the duration that the captured image appears on the monitor (post-
view) after the still image shooting button is pressed.
1
2
Display the Option Screen (page 118).
Select the post-view icon o, and
press the SET button.
h The Post-view Screen appears.
1 sec:
POST VIEW
1 sec
The post-view image is displayed
for 1 second.
2 sec:
The post-view image is displayed
for 2 seconds.
2 sec
OFF
OFF:
The post-view image is not
displayed.
3
Select the desired setting, and
press the SET button.
h This completes the post-view
setting.
125 English
Download from Www.Somanuals.com. All Manuals Search And Download.
WIND NOISE REDUCTION
This feature reduces the ambient sound of the wind when you are recording a
video clip or making an audio recording in a strong wind environment. Set the
function to on or off.
1
2
Display the Option Screen (page 118).
Select the wind noise reduction
icon `, and press the SET button.
WIND NOISE REDUC.
h The Wind Noise Reduction Screen
appears.
ON:
ON
The wind noise reduction function is
turned on.
OFF
OFF:
The wind noise reduction function is
turned off.
3
Select the desired setting, and
press the SET button.
h This completes the wind noise
reduction setting.
HINT
i For normal shooting, set the wind noise reduction to “OFF”. If the function
is enabled when there is no wind, the audio during shooting and recording
sounds unnatural.
English 126
Download from Www.Somanuals.com. All Manuals Search And Download.
NOISE-REDUCTION FUNCTION
Use this setting to minimize noise in still images and produce a clear image.
1
2
Display the Option Screen (page 118).
Select the noise-reduction icon ^,
and press the SET button.
h The Noise Reduction Screen
appears.
NOISE REDUCTION
ON
ON: The noise-reduction function
is enabled.
OFF
OFF: The noise-reduction function
is disabled.
3
Select the desired setting, and
press the SET button.
h This completes the noise-reduction
setting.
HINT
i The noise-reduction function operates when the shutter speed is slower
than 1/4 second.
i Compared to normal shooting, the image processing time after shooting is
slightly longer.
127 English
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST THE IMAGE QUALITY
The camera can adjust the image quality as the image is captured.
1
2
Display the Option Screen (page 118).
Select the image quality icon P,
and press the SET button.
h The Image Settings Screen
appears.
IMAGE SETTINGS
NORMAL
VIVID
NORMAL: Shoot with image
quality at normal.
SOFT
VIVID
SOFT
VIVID:
SOFT:
Color saturation is
increased.
The sharpness is
subdued for a softer
image.
SOFTVIVID:The sharpness is
softened and color
saturation is
increased.
3
Select the desired setting, and press the SET button.
h This completes the image quality setting.
English 128
Download from Www.Somanuals.com. All Manuals Search And Download.
FLICKER-REDUCTION
The flicker-reduction setting reduces the flicker that results when filming video
clips under fluorescent lights and the like where the background lighting
pulsates at the frequency of the power supply. The flicker-reduction setting is
set to a frequency of 50 Hz.
1
2
Display the Option Screen (page 118).
Select the flicker-reduction icon
o, and press the SET button.
h The Flicker Reduction Screen
appears.
FLICKER REDUCT
ON
ON: Turns on the flicker-reduction
setting.
OFF
OFF: Turns off the flicker-reduction
setting.
3
Select the desired setting, and
press the SET button.
h This completes the flicker-reduction
setting.
HINT
i If the flicker-reduction setting is used outdoors on a very bright day, a
halation effect, which produces diffused rings of light around bright light
areas, may occur.
i The manual exposure control and flicker reduction function cannot both be
enabled at the same time.
i When the flicker-reduction function is set to “ON”, the shutter speed during
video clip recording is fixed at 1/50 sec.
129 English
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL ZOOM SETTING
This setting allows you to specify whether or not the digital zoom is enabled
during zoom shooting.
1
2
Display the Option Screen (page 118).
Select the digital zoom icon Q,
and press the SET button.
DIGITAL ZOOM
h The Digital Zoom Screen appears.
ON: Digital zoom can be used.
OFF: Digital zoom cannot be used.
ON
OFF
3
Select the desired setting, and
press the SET button.
h This completes the digital zoom
setting.
HINT
i The digital zoom does not function in the following situation:
When the resolution is set to k.
English 130
Download from Www.Somanuals.com. All Manuals Search And Download.
MONITOR BRIGHTNESS
Adjust the brightness of the camera’s monitor display. Use this adjustment
when the monitor image is difficult to view because of ambient lighting.
1
2
Display the Option Screen (page 118).
Select the brightness icon ,, and
press the SET button.
h The brightness control display
appears.
BRIGHTNESS
ADJUST
3
Toggle the SET button to the left or right to set the brightness, and
press the SET button.
h The monitor brightness is set.
HINT
i The display in step 2 can also be accessed from the Shooting Screen.
Press the MENU button for at least 1 second; the brightness control
display will appear, and you can then adjust the monitor brightness.
131 English
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUST THE VOLUME OF AN
EXTERNAL MICROPHONE
The input level of a microphone connected to the camera can be adjusted.
1
2
Display the Option Screen (page 118).
Select the external microphone
volume icon W, and press the SET
button.
h The volume adjustment bar
appears.
EXT MIC VOLUME
VOLUME SETTING
3
Toggle the SET button to the left or
right to adjust the input level, and
press the SET button.
h This completes the input level
setting for the external microphone.
English 132
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN LANGUAGE
You can set the monitor of your camera to display the messages in any one of
several languages.
1
2
Display the Option Screen (page 118).
Select the language icon z, and
press the SET button.
LANGUAGE
h The Language Screen appears.
DEUTSCH:
ENGLISH:
ESPAÑOL:
FRANCAIS:
ITALIANO:
German
English
Spanish
French
Italian
NEDERLANDS:Dutch
:
Russian
Japanese
:
:
Korean
Chinese (traditional)
:
:
Chinese (simplified)
3
Select the desired language, and press the SET button.
h The selected display language is set.
133 English
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OUTPUT SETTING
Specify the type of image signal that is output from your camera’s USB/AV
terminal or COMPONENT terminal.
1
2
Display the Option Screen (page 118).
Select the TV output settings icon
j, and press the SET button.
h The TV Output Setting Screen
appears.
TV OUTPUT SETTINGS
TV SYSTEM
TV TYPE
EXIT
NTSC
TV SYSTEM:
Set the type of TV signal that is
output from the USB/AV terminal.
TV TYPE:
Set the TV’s aspect ratio.
EXIT:
Return to the Option Screen.
TV OUTPUT SETTINGS
TV SYSTEM
NTSC
<Example: When TV SYSTEM
was selected>
English 134
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OUTPUT SETTING
3
Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If “TV SYSTEM” is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If “TV TYPE” is selected>
: Images recorded in the HD mode with an aspect ratio of 16:9
are reproduced with an aspect ratio of 4:3 (letterbox format) with
black bars at the top and bottom of the picture.
: Images recorded in the HD mode with an aspect ratio of 16:9
are vertically compressed (squeeze format) to produce a picture
having an aspect ratio of 4:3.
4
5
6
Toggle the SET button up or down to select the desired parameter.
Press the SET button.
Select “EXIT”, and press the SET button.
h This completes the TV output setting.
135 English
Download from Www.Somanuals.com. All Manuals Search And Download.
k Relation between “TV TYPE” setting and TV display
The tables below show the video signal that is output when the “TV TYPE”
setting is changed. However, note that for some TVs that have an auto-detect
function, the output may not conform to the table, or the TV display may not
change at all.
“TVTYPE” TV type to be
setting connected
Image data to be
displayed
TV display
Still image
Video clip in normal
mode
16:9
Video clip in HD
mode
Still image
Video clip in normal
mode
4:3
Video clip in HD
mode
English 136
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OUTPUT SETTING
“TVTYPE” TV type to be
setting connected
Image data to be
TV display
displayed
Still image
Video clip in normal
mode
16:9
Video clip in HD
mode
Still image
Video clip in normal
mode
4:3
Video clip in HD
mode
The image is stretched
vertically.
* The still image examples are for images captured with the still image mode
set to a setting other than 8.
137 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
If the TV display is not correct…
i If the appearance of the image on the TV monitor is not correct, you can
either change the camera’s “TV TYPE” setting, or change the screen size
setting on your TV. To change the screen size setting on your TV, please
refer to the instruction manual for your TV.
When the aspect ratio of the output still image won’t be 16:9…
i The still image output will be 4:3 for images captured with the still image
mode set to a setting other than 8.
English 138
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SAVE FUNCTION
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated.
1
2
Display the Option Screen (page 118).
Select the power save icon ?, and
press the SET button.
h The Power Save Setting Screen
appears.
POWER SAVE
BATT/CAM
BATT/PB
1 min
5 min
BATT/CAM:
Set the standby time for the
shooting modes when the battery
pack is used.
EXT.PWR/CAM.PB
EXIT
10 min
BATT/PB:
Set the standby time for the
playback modes when the battery
pack is used.
EXT.PWR/CAM.PB:
Set the standby time for the
shooting and playback modes when
using an AC power source.
EXIT:
Return to the Option Screen.
139 English
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select the desired option, and press
the SET button.
h The Set Standby Time Screen
appears.
POWER SAVE
BATT/CAM
1 min
Toggle the SET button up or down
to set the standby time.
Up:
Increases the standby time.
Down:
Decreases the standby time.
<Example: When “BATT/
CAM” is selected>
5
6
Press the SET button.
h The standby time is set.
Select “EXIT”, and press the SET
button.
h You are returned to the Option
Screen.
English 140
Download from Www.Somanuals.com. All Manuals Search And Download.
FILE NO. RESET FUNCTION
If a newly formatted card is used, the file name (image number) of the
captured image automatically begins from 0001. If the card is subsequently
reformatted, or if a different reformatted card is used, the file names again
begin from 0001. This is because the file number reset function is set to “ON”,
and consequently it results in more than one card containing images with the
same numbers. By setting the file number reset function to “OFF”, even if the
card is reformatted or the card is replaced with another card, the consecutive
numbering of file names continues from the last number recorded by the
camera.
<File number reset function “ON”>
File name (image number)
Card A
0001, 0002 ..... 0012, 0013
Replace card
Card B
0001, 0002 ..... 0012, 0013
<File number reset function “OFF”>
File name (image number)
0001, 0002 ..... 0012, 0013
Card A
Replace card
Card B
0014, 0015 .......0025, 0026
141 English
Download from Www.Somanuals.com. All Manuals Search And Download.
i If Card B already has image data in it when it replaces Card A, file
numbers are assigned as follows.
When the highest file number on Card B (before replacing) is lower
than the highest file number on Card A: the file number of the next
recorded image continues from last file number recorded on Card A.
Card A
0001, 0002......0012, 0013
Replace card
Card B
0001, 0002, 0014, 0015...... 0025, 0026
Previously recorded files
When the highest file number on Card B (before replacing) is higher
than the highest file number on Card A: the file number of the next
recorded image continues from last file number recorded on Card B.
Card A
0001, 0002......0012, 0013
Replace card
Card B
0020, 0021, 0022, 0023...... 0025, 0026
Previously recorded files
English 142
Download from Www.Somanuals.com. All Manuals Search And Download.
FILE NO. RESET FUNCTION
1
2
Display the Option Screen (page 118).
Select the file number reset icon
i.
FILE NO. RESET
ON
3
Press the SET button.
h The File Number Reset Screen
appears.
OFF
ON:
The file number reset function is “ON”.
OFF:
The file number reset function is
“OFF”.
4
Select “OFF”, and press the SET button.
h The file number reset function is deactivated.
HINT
i Until the file number reset function is turned “ON”, consecutive file names
are assigned. It is recommended that the file number reset function be
returned to “ON” at the end of each photography session.
143 English
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A CARD
A card must be formatted with this camera:
i After purchasing, when used for the first time, or
i If it was formatted using a personal computer or another digital camera.
The card cannot be formatted if the lock switch is set to the “LOCK” position.
Proceed with the format procedure after setting the lock switch to the
unlocked position.
1
2
Display the Option Screen (page 118).
Select the format icon 1, and
press the SET button.
FORMAT
FORMAT
h The Format Screen appears.
h In normal use, a full format is not
necessary. However, in case a card
error occurs even after normal
formatting, executing a full format
may resolve the problem.
FULL FORMAT
EXIT
FORMAT:
A normal formatting is executed.
FULL FORMAT:
The entire card is scanned and
formatted. (When there is little
battery power remaining, this
setting cannot be selected.)
English 144
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A CARD
3
4
Select the desired format option, and press the SET button.
h A confirmation screen appears.
Select “YES”, and press the SET button.
h Formatting begins.
h During formatting, “Formatting” and “do not power off” are shown on
the monitor.
CAUTION
Caution during formatting
i Do not turn off the power to the camera or eject the card during formatting.
Formatting erases the data
i When a card is formatted, all data recorded on the card is erased.
Protected data (page 95) is also erased, so before formatting a card, any
data you want to keep should be copied to your personal computer’s hard
disk or other storage medium.
Caution regarding disposing/transferring the card (recovering data from
a reformatted card)
i If a card is reformatted or the data is erased from the card using the
camera or a computer, the card’s control data may be merely modified and
the data itself may not be completely erased from the card.
i In some cases it may be possible to recover the data from a reformatted
card using special software for that purpose. However, if the camera is
used to execute a full format, it will be impossible to recover the data even
by the use of data recovery software.
i If you are disposing of a card, it is recommended that you physically
destroy it. If you are transferring the card to someone else to use, it is
recommended that you use the camera’s full format function to reformat
the card, or use commercially available software for erasing card data.
Managing data is the responsibility of the user.
HINT
To cancel formatting
i In step 4, select “NO”, and press the SET button.
145 English
Download from Www.Somanuals.com. All Manuals Search And Download.
RESETTING THE CAMERA SETTINGS
Reset the camera to the factory-preset settings.
1
2
Display the Option Screen (page 118).
Select the reset settings icon 2,
and press the SET button.
h The Reset Settings Screen
appears.
RESET SETTINGS
Reset?
YES:
Reset to the factory-preset settings.
NO:
Do not change the settings, and
return to the Option Screen.
YES
NO
3
Select “YES”, and press the SET
button.
h The camera settings are reset to
the factory-preset settings.
HINT
i Note that the following settings do not change with this procedure:
Date and time setting
Language setting
TV system setting
English 146
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE REMAINING CARD MEMORY
You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see “Possible No. of
Images/Possible Shooting Time/Possible Recording Time” on page 189.
Checking the remaining number of images and video recording time
1
Set the main switch to REC, and turn
on the camera (page 30).
h The remaining number of images
appears in the upper left of the
monitor.
Remaining number of images
Remaining video
recording time
h The remaining video recording time
appears in the upper right of the
monitor.
297
00:20:39
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
F3.5
1/40
For audio recordings
1
Set the camera to the audio
recording mode (page 56).
h The remaining audio recording
time is shown.
Remaining time
297
08:24:01
F3.5
1/40
147 English
Download from Www.Somanuals.com. All Manuals Search And Download.
HINT
i When the remaining number of images or the remaining video recording
time is “0”, you cannot capture any more images. To capture more images,
either install a new card, or save the images to a computer and then erase
them (page 97) from the card.
i When the remaining number of images or the remaining video recording
time is “0”, it may be possible to capture a few more images by setting a
lower resolution setting (pages 71 and 72), or selecting a different image
quality setting.
English 148
Download from Www.Somanuals.com. All Manuals Search And Download.
CHECKING THE REMAINING BATTERY PACK CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the monitor. Make sure to check this indicator before capturing an
image. For an indication of the possible length of time for battery
pack operation, see page 188.
1
Display a Shooting or Playback
Setting Screen (pages 65 and 89).
h The battery pack remaining charge
indicator appears in the lower right
corner of the monitor.
IMAGE STABILIZER
VIDEO VIEW
h Due to the battery pack
characteristics, when the ambient
temperature is low,
may
appear early for an incorrect
indication of the remaining charge.
Also, depending on the conditions
of use of the camera or the ambient
conditions (temperature, etc.), the
indicated remaining charge may
change. Therefore, this indication
can only be used as a general
approximation of the remaining
charge.
Battery pack remaining
charge indicator
Battery pack
remaining
Battery remaining charge
charge indicator
No indication, or
Approx. full.
Power is low.
It will soon be impossible to capture or play
back images.
If this icon flashes when the still image
shooting button or video clip recording
button is pressed, images cannot be
captured. Recharge the battery pack.
149 English
Download from Www.Somanuals.com. All Manuals Search And Download.
HINT
i If any data is present, you can also check the remaining battery pack
charge on the Information Screen (page 117).
i Battery life may differ even among battery packs of the same type.
i Depending on the usage of the camera (such as the number of times the
flash is used, the use of the monitor, etc.) or the ambient temperature
(temperatures below 10°C [50°F]) the number of images that can be saved
on a fully charged battery pack will vary greatly.
i It is recommended that you prepare an extra battery pack(s) when taking
pictures at a wedding or while traveling, for example, so you don’t miss
capturing images of important moments due to the battery pack power
running out. The same is recommended for taking photos in cold
environments. (In a ski area, for example, the battery pack can be kept
warm in your pocket until ready to use.)
English 150
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV
Connect the camera to the TV.
How to connect
i Connect the USB/AV terminal or COMPONENT terminal to the AUDIO and
VIDEO input terminals on the TV.
i When the camera’s monitor unit is closed and the camera is set in the
docking station, press the operation mode button [
station.
] on the docking
<When connecting to a standard video input terminal>
Yellow plug:
To Video Input terminal
USB/AV terminal
Supplied dedicated
S-AV interface cable
i Insert the plug with the
[n] mark facing up.
To AC adaptor
White plug: To Audio Input (L) terminal
Red plug: To Audio Input (R) terminal
Not connected*
Set the input to “VIDEO”.
* When connected, the images are not produced normally on the TV
monitor.
151 English
Download from Www.Somanuals.com. All Manuals Search And Download.
<When connecting to an S-VIDEO input terminal>
Yellow plug:
Not connected*
USB/AV terminal
Supplied dedicated
S-AV interface cable
i Insert the plug with the
[n] mark facing up.
To AC adaptor
White plug: To Audio Input (L) terminal
Red plug: To Audio Input (R) terminal
S-terminal
Set the input to “VIDEO”.
* When connected, the images are not produced normally on the TV
monitor.
English 152
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO A TV
Playback
i After connecting the camera to the television, set the TV input switch to
VIDEO input.
i When an S-AV interface cable is connected, no image appears on the
camera’s monitor.
i The playback method is the same as when viewing images on the
camera’s monitor.
Audio playback: see page 58
i The remote control unit can be used for playback (page 59).
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
HINT
About the display when the “PAL” TV system is selected (page 134) and
the supplied S-AV interface cable is used to connect the camera to the
TV
During recording:The image appears on the monitor only; it does not appear
on the TV.
During playback: The image appears on the TV only; it does not appear on
the monitor.
153 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy higher image quality (progressive output)
If your TV has a 720p input terminal, you can enjoy the high video quality of
progressive output from your camera.
COMPONENT
terminal
White plug: To Audio Input (L) terminal
Red plug: To Audio Input (R) terminal
Supplied dedicated
component cable
i Insert the plug with the
[n] mark facing up.
To AC adaptor
To 720p input terminal
During recording:The image appears on the monitor only; it does not appear
on the TV.
During playback: The image appears on the TV only; it does not appear on
the monitor.
* The date and time, as well as the counter, are not
displayed.
NOTE
i Do not connect the dedicated S-AV interface cable and the dedicated
component cable to the docking station at the same time. In some cases
the images may not appear properly on the TV.
If your TV does not have 720p video input capability
i The images will not appear on the TV.
Camera Menu Screen and TV Menu Screen
i The Menu Screen appears only on the TV monitor, so please operate the
camera while looking at the TV monitor.
i The layout of the Menu Screen as it appears on the TV is different from
that on the camera.
English 154
Download from Www.Somanuals.com. All Manuals Search And Download.
DIRECT PRINTING
Your camera supports the PictBridge function. By connecting the camera
directly to a PictBridge-enabled printer, the camera’s monitor can be used to
select images and initiate printing (PictBridge printing).
Print preparations
1
2
Install the card in the camera, open the monitor unit to turn on the
camera, and turn on the printer.
Use the supplied docking station or adaptor to connect the camera
to the printer.
USB/AV terminal
To AC adaptor
To USB connector on the printer
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
155 English
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Select “PictBridge”, and press the
SET button.
PRINTING MODE
PRINT 1 IMAGE
Print this image
The PictBridge printing mode is
activated.
h The camera switches to the
PictBridge printing mode, and the
PictBridge Screen appears.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
Caution when connecting a printer
i If the power to the printer is turned off while it is connected, the camera
may not operate correctly. If the camera does not operate correctly,
disconnect the USB interface cable, turn off the camera, and then
reconnect the cable.
i During PictBridge printing, the camera’s button operation response is
slower.
i If the camera is powered by the battery pack for printing, make sure that
the remaining battery charge is sufficient.
English 156
Download from Www.Somanuals.com. All Manuals Search And Download.
DIRECT PRINTING
To select one image and print it (one image)
Procedure to select one still image and print it.
1
2
Complete the printing setup (page 155).
Select the one image icon Y, and
press the SET button.
h The screen to select images for
printing appears.
PRINT 1 IMAGE
COPIES
1
3
Toggle the SET button to the left or
right to display the image you wish
to print.
PRINT
EXIT
h Specify the image to print.
157 English
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Specify the number of prints.
1 Select “COPIES”, and press the
SET button.
2 Toggle the SET button up or down
to specify the number of prints.
3 Press the SET button.
h “PRINT” is selected.
PRINT 1 IMAGE
COPIES
1
PRINT
EXIT
Press the SET button.
h Printing begins.
HINT
To cancel printing
1 During printing, toggle the SET button down.
h The Confirm Cancel Printing Screen appears.
2 Select “YES”, and press the SET button.
h If “EXIT” is selected and the SET button is pressed, printing resumes.
English 158
Download from Www.Somanuals.com. All Manuals Search And Download.
DIRECT PRINTING
To print all the images (all images)
Print all of the images on the card.
1
2
Complete the printing setup (page 155).
Select the all images icon u, and
press the SET button.
h The Print All Images Screen
appears.
PRINT ALL IMAGES
3
Select “PRINT”, and press the SET
button.
h Printing begins.
PRINT
EXIT
CAUTION
Printing is not possible if there are more than 999 still images in the
card.
i Delete unwanted images before printing.
159 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Thumbnail prints (index)
Make an index print of all the images on the card.
1
2
Complete the printing setup (page 155).
Select the index print icon [, and
press the SET button.
INDEX
h The Index Print Screen appears.
3
Select “PRINT”, and press the SET
button.
PRINT
EXIT
h Printing begins.
English 160
Download from Www.Somanuals.com. All Manuals Search And Download.
DIRECT PRINTING
To print the images that are set to print (print reserved images)
Procedure to print all the images that are set to print.
1
2
Make the print settings (page 110), and complete the printing setup
(page 155).
Select the DPOF icon w, and
press the SET button.
h The Print Scheduled Images
DPOF
:
:
copies
Screen appears.
3
Select “PRINT”, and press the SET
button.
h Printing begins.
PRINT
EXIT
h Printing begins about 1 minute after
the SET button is pressed.
HINT
i In step 2, if you toggle the SET button to the left or right, you can confirm
the images that are set to print and their DPOF settings.
CAUTION
i Reserved images printing w is not possible if a printer is used that does
not support your camera’s DPOF function.
161 English
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the printer settings and print images
(change printer settings)
Images are printed according to settings specified by the camera, such
as paper type, size, layout, printing quality, etc.
1
2
Complete the printing setup (page 155).
Select the printer settings icon v,
and press the SET button.
h The Printer Settings Screen
appears.
PRINTER SETTINGS
MEDIA TYPE
PAPER SIZE
LAYOUT
PRINTER VALUES
PRINTER VALUES
PRINTER VALUES
PRINTER VALUES
PRINTER VALUES
MEDIA TYPE:
Specify the type of paper used for
printing.
QUALITY
DATE STAMP
PAPER SIZE:
Specify the size of paper used for
printing.
EXIT
LAYOUT:
Specify how the images are to be
arranged on the paper.
QUALITY:
Select the print quality for the
images.
DATE STAMP:
Print the date the photo was taken.
EXIT:
Return to the PictBridge Screen.
English 162
Download from Www.Somanuals.com. All Manuals Search And Download.
DIRECT PRINTING
3
Adjust the printer settings.
1 Toggle the SET button up or down to select a printer setting
parameter, and press the SET button.
h The screen to set the selected parameter appears.
2 Toggle the SET button up or down to adjust the setting, and
press the SET button.
h The selected parameter is set, and you are returned to the Printer
Settings Screen.
h Follow the same procedure to adjust the other parameters, as
desired.
h The contents of the settings that can be made for each parameter
will differ depending on the printer.
<When “PRINTER VALUES” is selected>
h The images will be printed according to the settings specified on the
printer side.
4
Select “EXIT”, and press the SET button.
h You are returned to the Printing Mode Screen.
HINT
i The printer setting parameters will differ depending on the printer that is
connected.
i To use printer functions which do not appear on your camera’s Printer
Settings Screen, select “PRINTER VALUE”.
i If a function set by the camera is not available in the printer, the camera’s
printer settings will automatically change to “PRINTER VALUE”.
163 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING AN EXTERNAL MICROPHONE
A commercially sold stereo microphone can be connected to the camera.
To reduce unwanted
electromagnetic radiation
i Affix the core (supplied) to the cable.
External microphone
jack [MIC]
Microphone connection cable
Stereo
microphone
HINT
i The input level of the connected microphone can be adjusted (page 132).
i When an external microphone is connected, the camera’s stereo
microphone is disabled.
English 164
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDICES
COMMONLY ASKED QUESTIONS
If you have a question about the camera operation, you might find the answer
in this compilation of commonly asked questions.
Question
Answer
Action
Why doesn’t the
power turn on?
Due to cold
temperatures, the your pocket to warm
battery pack
temporarily lost its
power.
Place the camera in
it up before using it.
Why is the battery The ambient
Keep the battery
pack in an
environment of 10 to
40°C (50 to 104°F).
pack consumed
so quickly even
after it was fully
recharged?
temperature is
very low.
Power
Why doesn’t
recharging end?
The battery pack
life has expired.
Replace with a new
battery pack. If this
is not effective,
consult your dealer.
Why does the
The remaining
battery pack
power is low.
Use the supplied AC
adaptor, or replace
the battery pack with
a fully charged one.
icon
appear?
Why does the
multi-indicator
flash red?
Recorded data is
being saved on
the card.
Not a malfunction.
Wait until the multi-
indicator turns off.
Why doesn’t the
flash operate?
The camera has
determined that
the image is bright the camera will
Not a malfunction.
Capture the image;
Shooting
enough and the
flash is not
determine when the
flash is necessary.
necessary.
165 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Question
Answer
Action
Are the settings
retained even
after the camera
is turned off?
—
All settings except
the self-timer and
the exposure
correction are
retained even after
the camera is turned
off.
Which resolution
setting should I
use?
—
Select the resolution
setting according to
the intended use:
r, s, v, 8:
Appropriate for
printing letter-size or
larger, and for
printing a close-up
of part of a photo
(trimming).
G, A: For
printing standard
photo (photo
service) sizes.
Shooting
[: For photos
displayed on a web
page, or sent as e-
mail attachments.
What is the
difference
—
Because shooting
with the optical
between the
digital zoom and
the optical zoom?
zoom uses the
optics of a physical
lens, you can shoot
without losing
minute details in the
image. The digital
zoom, on the other
hand, works by
magnifying a portion
of the image that
hits the CCD sensor
and may produce a
coarser image.
English 166
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMONLY ASKED QUESTIONS
Question
Answer
Action
How can I get the
distant view into
focus?
—
Set the scene select
function to the
landscape +
mode when
photographing.
Or, set the focus
range setting to
manual focus -,
and set the distance
to ∞.
Set the flicker-
reduction setting to
off.
Shooting
The video clip I
shot outdoors is
completely white.
—
When used in
cold weather, why the monitor
does the image
seem to leave
traces as it
Condition due to
Not a malfunction.
Spots that appear in
the monitor only
appear in the
monitor and will not
be recorded with the
images.
characteristics.
moves?
Monitor
Why does the
displayed image
contain some red,
blue and green
dots, or why are
black spots
visible?
Why is the image The subject was
too bright? too bright.
When capturing an
image, devise a way
to compensate for a
bright subject, for
example, by
Viewing
images
changing the
shooting angle.
167 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Question
Answer
Action
Why is the image The focus is not
Hold the camera
correctly and slowly
press the still image
shooting button
halfway to lock the
focus. Then press
the still image
out of focus?
locked properly.
shooting button all
the way to capture
the image.
Why is a part of
the image
missing?
The image was
captured at close
range.
When capturing an
image at close
range, compose the
image using the
monitor.
Why is there no
image (z is
shown)?
This may happen Play back images
when trying to that were recorded
play back images on a card using this
Viewing
images
stored on a card
from a different
digital camera.
camera.
Why do vertical
stripes appear?
If a bright subject Not a malfunction.
is shot in the
video clip
recording mode,
vertical stripes
may appear on
the monitor or in
the image.
Why isn’t the
magnified image
clear?
Due to the
characteristics of
the camera,
magnified images
appear less clear.
Not a malfunction.
Not a malfunction.
Why isn’t the
captured image
clear?
The image was
captured using
the digital zoom.
English 168
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMONLY ASKED QUESTIONS
Question
Answer
Action
Can I play back
image and sound
data that I edited
using my
—
We cannot guaran-
tee the accurate
playback of data that
has been edited
Viewing
images
computer?
using a computer.
Why is there a
motor-like sound
during video clip
playback?
The sound of the
camera’s
mechanical action
was recorded.
Not a malfunction.
Why is there no
sound?
The volume on
the TV is set to
the minimum.
Adjust the volume
on the TV.
The playback
volume of the
Increase the
playback volume of
camera is set to 0. the camera.
What is the
—
Normal video (com-
difference among
the normal video
(composite video)
output, S-video
output and
posite video) output:
Combines Y (lumi-
nance) signal and
chrominance signal
and outputs the
progressive
output?
combined signal.
S-video output: Out-
puts the Y signal and
chrominance signal
separately.
Connecting
to a TV
Progressive signal:
Outputs the Y signal,
B-Y signal and R-Y
signal separately.
The picture quality
becomes increas-
ingly higher, in order
from normal video
output, to S-video
output, to progres-
sive output.
169 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Question
Answer
Action
Can the dedicated
S-AV interface
cable and the
dedicated compo-
nent cable con-
nect at the same
time and output
the image?
—
You cannot output
the image when both
cables are con-
nected at the same
time. Connect only
one of the cables.
Connecting
to a TV
What image will
appear on the TV
when the dedi-
cated component
cable is con-
nected to a TV
supporting D1/
480i, D2/480p or
D3/1125i signals?
—
With this camera,
the progressive out-
put is available only
on TVs supporting
720p signals. The
image does not
appear on TVs sup-
porting D1/480i, D2/
480p or D3/1125i
signals.
Why does a
message appear
during PictBridge printer.
printing?
There is a
problem with the
Please refer to the
instruction manual
for your printer.
Printing
The “Cannot edit
video” message
appears.
You have
attempted to join
video clips having resolution or frame
different
Select video clips
that have the same
rates.
resolutions or
frame rates.
Why is a noise
heard from a
nearby TV or
radio during bat-
tery recharging?
Electromagnetic
waves are emitted adaptor further away
from the AC
adaptor.
Move the AC
Misc.
from the TV or radio
when recharging the
battery pack.
Why does the
“Card full”
message appear? on the card.
There is no more
available memory data, or use a card
Erase unnecessary
that has more
memory available.
English 170
Download from Www.Somanuals.com. All Manuals Search And Download.
COMMONLY ASKED QUESTIONS
Question
Answer
Action
Why does the
“Card is
protected”
The lock switch on Move the lock switch
the card is in the
locked (protect)
to the unlocked
position.
message appear? position.
Why can’t the
camera be
operated?
A temporary
Remove the AC
internal circuitry
problem may be
the cause.
adaptor and the
battery pack from
the camera, wait a
few minutes, then
reinstall the battery
pack and try again.
A problem such
as inability to
record or play
back occurs.
The card contains After saving your
files that were
saved using a
files to a different
medium, format the
Misc.
device other than card.
this camera.
Can I use my
camera abroad?
—
When the camera is
connected to a TV,
you can switch the
camera’s video
output to NTSC or
PAL. If you have
questions about
using the AC
adaptor and power
cord abroad, please
consult with a dealer
near you for advice.
171 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Question
Answer
Action
Why does the
“System error”
message appear? the camera or
card.
A problem has
occurred within
Check the following
items:
1 Remove the
card and then
install it again.
2 Remove the bat-
tery pack and
then install it
again.
Misc
3 Install a different
card.
If “System error” still
appears after per-
forming the above
steps, then take the
camera to the dealer
for service.
English 172
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
CAMERA
Reference
page
Problem
Cause
Action
No power.
The battery
pack is dead.
Recharge the
battery pack, or
replace with a
new battery
pack. Or
connect the AC
adaptor
(supplied).
22, 26,
29
Power
The battery
pack has not
been inserted
correctly.
Reinsert the
battery pack,
making sure to
orient it
correctly.
The camera
turns off by
itself.
The power
save function
is operating.
Turn on the
camera again.
31
An image is
not captured
when the still
image
The power is
not turned on.
If the power
save function
was activated,
turn on the
shooting
camera before
Shooting button or video
clip recording
button is
shooting.
30, 31
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
pressed.
173 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
page
Problem
Cause
Action
An image is
not captured
when the still
image
shooting
button or video maximum
The maximum Install a new
20
number of
images that
can be
card.
Erase the
images that are
not necessary.
captured or the
97
clip recording
video clip
button is
pressed.
recording time
has been
reached.
The flash does The flash off
Set the flash to
automatic flash
mode or forced
flash mode.
not operate.
mode is
selected.
61
The battery
pack is dead.
Recharge the
battery pack, or
replace with a
new battery
pack. Or
22, 26,
29
Shooting
connect the AC
adaptor
(supplied).
The digital
The still image Set the still
zoom does not mode is set to image mode to
work.
v.
The digital
s.
Set the digital
72, 130
zoom setting is zoom setting to
set to “OFF”.
A warning tone The battery
(beep-beep- pack is
beep) sounds, consumed.
and it is not
“ON”.
Install a
sufficiently
recharged
battery pack.
Or connect the
AC adaptor
(supplied).
22, 26,
29
possible to
take a picture
using the self-
timer.
English 174
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
Not a
When zooming The optical
in or out, the
zoom
movement
stops
momentarily.
zoom has
moved to the
maximum
magnification
position.
malfunction.
Release the
zoom switch,
and press it
again.
60
83
—
There is noise The ISO sensi- Set the ISO
Shooting in the captured tivity setting is sensitivity to a
image.
too high.
lower setting.
The \ icon
The camera’s
internal
Discontinue
shooting, and
appears, and
shooting is not temperature is wait for the
possible.
high.
camera to cool
down before
using it again.
No playback
image
appears.
The main
switch is not
set to PLAY.
Set the main
switch to PLAY.
Monitor
43, 48
38
The image is
too dark.
The flash was
blocked by a
finger or other make sure the
Hold the camera
correctly, and
object.
flash is not
obstructed.
The subject
was too far
away.
Capture the
image in the
range of opera-
tion of the flash.
185
The subject
was lit from
behind.
Use the forced
flash mode.
Viewing
images
61
63
Use the expo-
sure correction
function.
Use the spot
light-measuring
mode.
82
83
There is not
enough light.
Adjust the ISO
sensitivity
setting.
175 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
page
Problem
Cause
Action
The video clip
picture is
flickering.
The video clip
was filmed
under
Set the flicker-
reduction
setting to on.
129
fluorescent
lighting.
The image is
too bright.
The forced
flash mode is
selected.
Select a
different flash
mode.
61
63
The subject
was too bright. exposure
correction
Use the
function.
The ISO
sensitivity
setting is
incorrect.
Set the ISO
sensitivity to
t.
83
79
The image is
not in focus.
The subject is
too close to the image with the
camera.
Capture the
Viewing
images
subject within the
photographable
range.
The focus
setting is not
correct.
Select the
correct focus
setting for your
needs.
The camera
moved when
the still image
shooting
button was
pressed.
Hold the camera
correctly and
slowly press the
still image
shooting button
halfway to lock
the focus. Then
press the still
image shooting
button all the way
to capture the
image.
38, 46
(camera
shake)
The focus is
not locked
properly.
The lens is dirty. Clean the lens.
—
English 176
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
The colors of
the images
captured
indoors are not
correct.
This is due to
ambient
lighting.
Capture the
image using the
forced flash mode.
61
84
The white
balancesetting balance setting
Set the white
is incorrect.
correctly.
A part of the
image is
missing.
The strap or a
finger was
blocking the
lens.
Hold the camera
correctly, and make
sure the lens is not
obstructed.
Viewing
images
38
—
“No image” is
shown.
There is no
data in the
installed card.
Play back after
capturing images
or making audio
recordings.
During audio
playback,there setting on the camera back volume.
The playback volume Adjust the play-
94
is no sound.
is too low.
There is no
color in the
image.
The TV output Select the cor-
setting is not
correct.
rect TV output
setting.
134
The image is
distorted.
Both the dedicated Make the correct
S-AV interface
cable and the
dedicated
connection.
154
151
component cable
are connected.
Connecting
to a TV
No image or
sound.
The camera is
not correctly
connected to the make the con-
TV. nection correctly.
The TV input is Set the input
Follow the
instructions to
not set
correctly.
on the TV to
“VIDEO”.
177 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
page
Problem
Cause
Action
There is no
sound.
The playback
volume setting back volume.
on the camera
Adjust the play-
94
Connecting
to a TV
is too low.
The edge of
the image is
cut off.
This is a
characteristic
of the TV.
Not a
malfunction.
—
Image
editing
You cannot edit or The protect
rotate an image. mode is set.
The camera is The AC
Cancel the
protect mode.
95
Check that the
power cord of
the AC adaptor
is connected
correctly.
set in the
adaptor is not
docking station connected to
22
26
but the
the docking
station.
installed
battery is not
being
The camera is When inserting
not correctly
connected to
the docking
station.
the camera in
the docking
recharged.
station, push
down on it to
make sure that
the connection
between the
camera and the
docking station
is secure.
Charging
The camera is Set the camera
in the shooting to the playback
mode.
mode or turn
the camera off.
Alternatively,
press the
docking
43, 48
station’s
operation
mode button
[
] to light
the CHARGE
indicator.
English 178
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
The “No card”
message
appears.
No card is
inserted.
Turn off the
power and
insert a card.
20
The “Image is
protected”
message
You have
attempted to
erase data that data to
Set the protect
setting for the
appears and
is protected UNLOCK.
95
the data cannot from
be erased.
accidental
erasure.
The audio
The audio
Set the audio
guide does not guide setting is guide setting to
123
Misc.
sound.
set to “OFF”.
“ON”.
The recording
The recording
Depending on
capacity is less capacity is less the card, the
than that than the value capacity may
indicated in the specified for
be less than
the specified
value. Please
refer to the
instructions
that
section
the card.
“Possible No.
of Images/
Possible
Shooting Time/
Possible
Recording
Time”.
189
accompanied
the card.
179 English
Download from Www.Somanuals.com. All Manuals Search And Download.
DOCKING STATION
Reference
page
Problem
Cause
Action
The remote
control unit
does not seem aimed at the
The remote
control unit is
Aim the remote
control unit at
the camera’s
remote control
sensor (within
to work.
TV (not at the
camera’s
remote control a range of
sensor).
about 30
degrees
horizontally
from the
remote control
sensor).
Something is
Remove or
obstructing the move the
spacebetween obstructing
Remote
control
unit
23, 24
the remote
control unit
and the
object.
camera’s
remote control
sensor.
The remote
control unit
battery is
Replace with a
new battery.
consumed.
The remote
control unit
battery is not
correctly
Take care that
the (+) and (–)
poles are
correctly
oriented.
inserted.
English 180
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Reference
page
Problem
Cause
Action
The remote
control unit
The remote
control unit is
Operate the
remote control
does not seem too far from the unit from a
to work. camera’s position up to 7
remote control meters from
23, 24
sensor.
the docking
station.
Remote
control
unit
The remote
control codes
for the remote
control unit
Change the
remote control
code.
25
and camera’s
remote control
sensor are
different.
181 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes regarding the Scene Select feature and filters
Scene Select
Setting
Remarks
Sports
a
Portrait
>
Focus range: + cannot be selected.
Landscape
+
Night view portrait
/
Fireworks
+
Focus range: Fixed at *.
Flash: Fixed at l.
Still image mode: Can be set to [ or A.
Flash: Fixed at l.
Focus range: + cannot be selected.
Noise-reduction: Fixed at “OFF” or _.
Lamp*
Q
* When recording a video clip in dark surroundings, the shutter speed
automatically decreases to the following values in order to produce a
sufficiently bright image.
However, when the flicker-reduction function is set to “ON”, the shutter
speed during video clip recording is fixed at 1/50 sec.
Video clip mode setting (page 71) Shutter speed
30 fps
60 fps
1/15 sec
1/30 sec
Note that when playing back video clips recorded at these settings, the
movement will be somewhat jerky.
Filter
Setting
Remarks
Cosmetic
Focus range: + cannot be selected.
%
Monochrome
W
,
Still image mode: k cannot be selected.
Focus range: + cannot be selected.
Sepia
About the scene select function and focus range settings
i
The scene select function changes to
=
when the focus range is set to
+.
i Even if you set the focus range to *, + or -, it changes to -
when the scene select function is set to anything other than =.
English 182
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Camera
Type
Digital Movie Camera (recording and playback)
Recorded image
file format
Still images:
JPEG format (DCF, DPOF, Exif 2.2 compliant)
Note: Designed mainly by the Japan Electronics
and Information Technology Industries
Association (JEITA), DCF (Design rule for
Camera File system) is standard for digital
still camera image files to provide
interoperability between digital
photography devices for the images stored
on removable memory cards. However, it
is not guaranteed that all devices will
support the DCF standard.
Video clips:
Conforms to ISO-standard MPEG-4 format
Audio:
MPEG-4 audio (AAC compression)
48 kHz sampling rate, 16-bit stereo format
Data storage
media
SD Memory Card (equivalent to a 4 GB SDHC
memory card)
Camera effective
number of pixels
Approx. 5.10 million pixels
Image sensor
1/2.5-inch (1 cm) CCD
Virtual number of pixels: Approx. 5.36 million pixels,
interlace scan, primary color filter
Still image shooting
mode
(recording resolution) Single-shot mode or sequential shots mode
s: 2,592 × 1,944 pixels (low compression)
Single-shot mode only
v: 3,680 × 2,760 pixels (standard compression)
r: 2,592 × 1,944 pixels (standard compression)
8: 2,592 × 1,464 pixels (standard compression)
G: 1,600 × 1,200 pixels (standard compression)
A: 1,280 × 960 pixels (standard compression)
[: 640 × 480 pixels (standard compression)
183 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Video clip
recording mode
(recording
resolution, frame
rate, bit rate)
HD mode
U: 1,280 × 720 pixels, 30 fps 9 Mbps
V: 1,280 × 720 pixels, 30 fps 6 Mbps
Normal mode
T: 640 × 480 pixels, 60 fps 6 Mbps
b: 640 × 480 pixels, 30 fps 3 Mbps
a: 640 × 480 pixels, 30 fps 2 Mbps
l: 320 × 240 pixels, 30 fps 640 Kbps
d: 320 × 240 pixels, 15 fps 384 Kbps
* The 60 fps frame rate of this camera is 59.94 fps,
the 30 fps frame rate is 29.97 fps, and the 15 fps
frame rate is 14.985 fps.
White balance
Lens
Full-auto TTL, manual setting possible
Optical 10x
zoom lens
f=6.3 mm to 63.0 mm
(35 mm film camera conversion
38 mm to 380 mm)
Autofocus, 9 groups, 12 elements
(including three with five aspheric
surfaces)
Galvanometer iris
Internal ND filter
Aperture
Open F=3.5 (Wide) to 3.5 (Tele)
Smallest F=8.0 (Wide) to 8.0 (Tele)
Exposure control
type
Programmable AE/Shutter speed priority AE/
Aperture priority AE/Manual exposure control
Exposure correction available from the Shooting
Setting Screen (0 1.8EV in 0.3EV steps)
Light-measuring
mode
Multi-section measuring, center-weighted
measuring, spot measuring
Range
Total mode:
10 cm (3.94 in.) to infinity (Wide end)
1 m (3.28 ft.) to infinity (Tele end)
Normal mode:
80 cm (31.50 in.) to infinity
Super macro mode:
1 cm (0.39 in.) to 1 m (3.28 ft.) (Wide end only)
Digital zoom
For shooting:
1x to approx. 10x
For playback:
1x to 58x (varies with resolution)
English 184
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Shutter speed
Still image shooting mode: 1/2 to 1/2,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/2,000 sec.)
Sequential shots mode:
1/15 to 1/2,000 second (no flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is
set to lamp mode Q)
Sensitivity
Still image shooting mode:
Auto (equivalent to ISO 50 to 200)/equivalent to
ISO 50, ISO 100, ISO 200, and ISO 400
(switchable from Shooting Setting Screen)
Video clip recording mode:
Auto (equivalent to ISO 200 to 800)/equivalent to
ISO 200, ISO 400, ISO 800 and ISO 1,600
(switchable from Shooting Setting Screen)
* Maximum ISO sensitivity up to 1,600
equivalent when Scene Select function is set to
Q
Minimum subject
illumination
27 lux (HD mode/normal mode, 30 fps, 1/30 sec in
AUTO mode)
14 lux (HD mode/normal mode, 30 fps, 1/30 sec at
ISO400, or 1/15 sec in lamp mode)
Image stabilizer
Monitor
Electronic (video clip recording mode only)
Amorphous silicon TFT color liquid crystal
(transmissive)
150,000 pixels (frame coverage: approx. 100%)
Flash working
range
GN = 6.4
Approx. 35 cm (13.78 in.) to 2.5 m (8.20 ft.)
(Wide)
Approx. 1 m (3.28 ft.) to 2.5 m (8.20 ft.) (Tele)
Flash modes
Focus
Auto-flash, forced flash, flash off, red-eye reduction
TTL-type AF (still image shooting mode: 5-point
range finder/spot focus; video clip recording mode:
Continuous focus), manual focus (22 steps)
Self-timer
Approx. 2-second delay, 10-second delay
185 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambient
environment
Temperature 0 to 40°C (32 to 104°F) (operation),
–20 to 60°C (–4 to 140°F) (storage)
Humidity
30 to 90% (operating, no
condensation)
10 to 90% (storage, no
condensation)
Power supply
Battery pack Li-ion battery pack (DB-L40) × 1
(supplied)
AC adaptor
(supplied)
VAR-G8
Power consumption
4.1 W (When using the Li-ion
battery during recording)
Dimensions (excluding
protrusions)
80 (W) × 119 (H) × 36 (D) mm
3.15 (W) × 4.69 (H) × 1.42 (D) in.
(Maximum dimensions)
Volumetric capacity: Approx. 204 cc
Weight
Approx. 210 g (7.4 oz.) (camera
only [without battery pack and
card])
English 186
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Camera connectors
[USB/AV]
Regrouped jack
(communication/
audio and video
output) terminal
Audio
output
265 mVrms (–9 dBs), 12 kΩ or less, stereo
Video
output
1.0 Vp-p, 75 Ω unbalanced, sync negative,
composite video
NTSC color TV system/PAL color TV system
(switchable from the Option Screen)
S-video Y signal: 1.0 Vp-p, 75 Ω, unbalanced, sync
output
negative
C signal: 0.286 Vp-p, 75 Ω, unbalanced
NTSC color TV system/PAL color TV system
(switchable from the Option Screen)
USB
USB 2.0 High-speed
[COMPONENT] 720p video output
(720p output)
terminal
Y signal: 1.0Vp-p/75 Ω unbalanced, tri-level sync
Pb and Pr signals: 0.7Vp-p/75 Ω unbalanced
[MIC]
(microphone
input) terminal
Ø2.5 mm stereo mini jack (converts to a Ø3.5 mm stereo mini
jack by the supplied microphone connection cable), 2 kΩ.
Sensitivity: less than –42 dB (plug-in power type microphone)
DC IN (external
DC 5 V (for exclusive use with the supplied AC adaptor
DC power input) [VAR-G8])
terminal
187 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery life
Shooting
Still image
shooting mode
170 images:
CIPA standard (when a Hagiwara
Sys-Com 512MB SD Memory Card
is used)
Video clip
recording mode
75 minutes:
Recorded in HD-SHQ mode
(1,280 × 720 pixels, 30 fps)
Playback
220 minutes:
Monitor on, continuous playback
i Until battery pack runs out when using a fully charged battery pack at a
25°C (77°F) ambient temperature.
i The operation time may vary depending on the conditions of the battery
pack and the conditions of use. Especially when used at temperatures
below 10°C (50°F), the battery pack operation time is drastically reduced.
English 188
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Possible No. of Images/Possible Shooting Time/
Possible Recording Time
The table shows the possible number of captured images and the
possible recording times for commercially available SD Memory Cards
(1 GB, 2 GB, 4 GB).
Shooting/
recording
mode
SD Memory Card
2 GB
Resolution
setting
1 GB
4 GB
k
s
r
8
t
A
[
U
V
T
b
a
l
d
297 images
399 images
595 images
953 images
1,510 images
2,380 images
596 images
795 images
1,190 images
1,590 images
2,380 images
3,760 images
5,900 images
9,540 images
1,190 images
1,870 images
2,950 images
4,770 images
Still image
mode
7,740 images 15,500 images 31,000 images
14 min. 22 sec. 28 min. 46 sec. 57 min. 34 sec.
21 min. 20 sec. 42 min. 42 sec.
21 min. 20 sec. 42 min. 42 sec.
1 hr. 25 min.
1 hr. 25 min.
2 hr. 45 min.
4 hr. 1 min.
Video clip
mode
41 min. 23 sec.
1 hr.
1 hr. 22 min.
2 hr.
2 hr. 38 min.
3 hr. 49 min.
5 hr. 17 min.
7 hr. 39 min.
10 hr. 36 min.
15 hr. 18 min.
Audio
recording
mode
—
16 hr. 49 min.
33 hr. 40 min.
67 hr. 23 min.
i The maximum continuous shooting time at the l setting is 5 hours 30
minutes. The maximum continuous shooting time at the d setting is 7
hours.
i Up to 13 hours of continuous audio recording is possible.
i The above values apply when an SD Memory Card by Sandisk is used.
i Even with cards of the same capacity, the amount of data that can actually
be stored may differ depending on the card brand, etc.
i The continuous shooting time for each video clip will differ depending, for
example, on the card capacity, environmental conditions (temperature and
shooting conditions, etc.).
189 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Docking station
Part number
Power supply
Rated output
PDS-HD1A
DC 5V
DC 5V
Ambient
environment
Temperature 0 to 40°C (32 to 104°F) (recharge),
–20 to 60°C (–4 to 140°F) (storage)
Humidity
20 to 80% (no condensation)
Dimensions
Weight
94 (W) × 40.7 (H) × 92 (D) mm
3.70 (W) × 1.60 (H) × 3.62 (D) in.
Approx. 70 g (2.5 oz.)
Remote control unit
Part number
Power supply
Dimensions
BRC-C2
Lithium battery (CR2025)
32.4 (W) × 68 (H) × 15.6 (D) mm
1.28 (W) × 2.68 (H) × 0.61 (D) in.
Weight
Approx. 16 g (0.6 oz.) (including battery)
English 190
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Concerning the multi-indicator
The camera’s multi-indicator will light, flash, or be off, depending on the
different camera operations.
Multi-indicator
Multi-indicator
Color
Camera status
status
Lit
Connected to
computer or
printer (USB)
Green
Power save
mode active
Flashing
Connected to
the dedicated
S-AV interface
cable or the
dedicated
Orange
Lit
component
cable
During self-
Slow timer
photography
Fast
Accessing card
Red
Flashing
Battery charge
Very error or rise in
fast
internal
temperature
191 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied AC adaptor
Part number
Power source
Rated output
VAR-G8
AC 100 V to 240 V, 50/60 Hz
DC 5 V, 2.0 A
0 to 40°C (32 to 104°F) (operation),
–20 to 60°C (–4 to 140°F) (storage)
Temperature
Humidity
Ambient
environment
20 to 80% (no condensation)
49.5 (W) × 25.5 (H) × 68.3 (D) mm
1.95 (W) × 1.00 (H) × 2.69 (D) in.
Dimensions
Weight (without power cord) Approx. 169 g (6.0 oz.)
VPC-HD1A AC 125 V, 7 A
Power cord
VPC-
rated value
AC 250 V, 2.5 A
HD1AEX
i When using the supplied AC adaptor abroad, the power cord may need to
be replaced in accordance with local requirements. Please contact your
local dealer for details.
Supplied Li-ion battery pack
Model number
Voltage
DB-L40
3.7 V
Rated output
1,200 mAh
Ambient
environment
Temperature 0 to 40°C (32 to 104°F) (during use, when
charging)
–10 to 30°C (14 to 86°F) (storage)
Humidity
10 to 90% (no condensation)
Dimensions
Weight
53.4 (W) × 6.0 (H) × 35.5 (D) mm
2.10 (W) × 0.24 (H) × 1.40 (D) in.
Approx. 23 g (0.8 oz.)
English 192
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Others
Apple, Macintosh and QuickTime are trademarks or registered
trademarks of Apple Computer Inc.
Windows and Windows NT are registered trademarks of Microsoft
Corporation.
All other company and product names are registered trademarks or
trademarks of their respective owners.
CAUTION
i It is forbidden to copy this manual, whole or in part, without prior written
permission.
i All images and illustrations given in this manual are for explanation
purposes and may differ slightly from that of the actual product. Also,
actual specifications are subject to change without prior notice and
therefore may differ from the contents of this manual.
i Sanyo Electric shall not be held responsible for any problems resulting
from the use of this camera.
i Sanyo Electric declines all responsibility for damages due to improper use
of the camera, failure to adhere to the instructions given in this manual, or
repairs or changes done by those other than a technician authorized by the
manufacturer.
i Sanyo Electric shall not be held responsible for any damage caused by
optional devices or consumable items used with the camera other than
those supplied with the camera or those specified by Sanyo Electric.
i Sanyo Electric shall not be held responsible for any losses or loss of
revenue resulting from the loss of data caused by the malfunction, or the
repairing of a malfunction, of the camera.
i The images captured with this camera will differ in quality from pictures
taken with a standard film camera.
193 English
Download from Www.Somanuals.com. All Manuals Search And Download.
HINTS FOR TAKING PICTURES
Taking great pictures in difficult surroundings is easier than you might think.
By keeping a few points in mind and choosing the correct settings, you can
create photos that you’ll be proud to display and share.
If images are blurred even when the autofocus is
used
Your camera employs an autofocus function. When you snap a picture using
the autofocus, the camera automatically adjusts the settings so that the
image will be in focus. If you are getting blurred images even when using the
autofocus, one or more of the following might be the reason.
k How the autofocus works
The autofocus is activated when the still images shooting button is gently
pressed halfway. Press the still images shooting button slightly, and the target
mark will appear on the monitor to indicate that the autofocus has been
activated. Next, continue to gently press the still images shooting button all
the way to snap the picture. This two-step method is the way to ensure that
your photos are perfectly focused.
k Reasons for unfocused images
1 The still images shooting button was pressed all the way in one step.
2 After the image was focused, the subject moved.
h Even if camera focuses the subject once, if the distance between the
camera and the subject is changed, the subject may become out of
focus.
3 The focus setting is not set for the correct distance.
h If you shoot a close-up subject with the camera set to the normal focus
mode, or if you shoot a subject at normal distance with the camera set
to the super macro (close-up) mode, the image will not be in focus.
k Preventing blurred images
1 Confirm that the camera is set to the correct focus mode for your subject.
2 Hold the camera correctly, and press the still images shooting button
halfway.
3 Wait for the target mark to appear in the monitor, and holding the camera
steady, gently continue to press the still images shooting button all the
way down.
Following these steps for a gentle but firm pressing of the still images
shooting button will ensure that you get beautifully focused photos.
English 194
Download from Www.Somanuals.com. All Manuals Search And Download.
HINTS FOR TAKING PICTURES
Photographing a moving subject
Situation: You would like to snap an action shot of a moving child or pet. The
autofocus is activated, but because the subject is moving, the image may be
blurred. In particular, when the distance between the camera and the subject
is changing, it is difficult to lock the focus on the subject. Here are some hints
for successfully capturing images of moving subjects.
k Reasons for unfocused images
When the still images shooting button is gently pressed halfway, the camera’s
autofocus works by determining the distance between the camera and the
subject. Once the subject is in focus, if it then moves before the picture is
snapped, the image may be out of focus. This often happens when you once
lock the focus on a subject and then wait for the right moment to snap the
picture. And, conversely, a blurred image may result if you press the still
images shooting button all the way in one step in an attempt to quickly
capture an action scene, thus failing to activate the autofocus in time.
k Preventing blurred images (How to use the manual focus [page 80])
In addition to the autofocus, a manual focus mode is also incorporated in your
camera. In the autofocus mode, the distance between the camera and the
subject is automatically determined when you press the still images shooting
button halfway. In contrast to this, with the manual focus mode, you manually
set the focus by specifying the correct distance between the camera and the
subject before taking the picture.
k How to photograph a moving subject
1 Set the camera’s focus mode to the manual focus. Set the focus distance
to the correct distance between the camera and the subject.
2 When the subject is at the set focus distance, gently press the still images
shooting button all the way down.
<Advantage of using the manual focus>
i Images can be quickly captured without waiting for the autofocus to
activate.
i Because you are presetting the focus distance, the focus can be more
accurate.
<Using the manual focus effectively>
i When photographing a moving subject, press the still images shooting
button just before the subject reaches the focus distance, and the shutter
will be released when the subject is at the correct distance.
i Use manual focus to avoid incorrectly focused images when there is an
object between the camera and the subject you wish to focus on.
195 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting portraits (portrait mode >)
Points:
i Choose a background that doesn’t detract from your subject.
i Move in close to your subject.
i Pay attention to lighting and how it affects your subject.
NOTE
i If the background is distracting, it will not show your subject to his best
advantage. Move in closer to your subject or zoom in so that the
background does not compete with the subject.
i In portrait photography your subject is clearly the central figure, so try
techniques that allow the subject to stand out.
i If light is coming from behind your subject (backlit), his face will appear
dark. You can get a better picture by using the flash, for example, or
changing the exposure setting.
Photographing moving subjects (sports mode a)
Points:
i Match the camera’s movement with that of the subject.
i Set the zoom to the Wide end (wide-angle).
i Don’t be too hesitant to press the still images shooting button, or you’ll
miss the action.
NOTE
i Tips to not missing those great action shots: Make sure you’re holding the
camera correctly. Keep the subject in the lens at all times, moving the
camera with him while waiting for the right shot. Move your whole body–not
just your arms–with the camera while shooting.
i Blurred images are more likely when the zoom is set to the Tele end than
the Wide end. Set the zoom as close as possible to the Wide end.
i Learn to press the still images shooting button quickly yet smoothly the
instant your photo chance occurs.
English 196
Download from Www.Somanuals.com. All Manuals Search And Download.
HINTS FOR TAKING PICTURES
Night photography (night view portrait mode /)
Points:
i Avoid camera shake.
i Increase the ISO sensitivity.
NOTE
i Camera shutter speed during night photography is considerable slower, so
there is a much greater chance that your photographed images will be
blurry. Use a tripod whenever possible, or if a tripod is not available, you
can lean against a wall or pillar to help stabilize the camera.
i You can photograph your subject with the night scene in the background by
using the flash. Be careful not to shoot too close to the subject, however, or
your subject’s face will appear too bright.
i After the flash operates, keep the camera and the subjects motionless for
about 2 seconds.
Photographing scenery (landscape mode +)
Points:
i Shoot using a high resolution.
i For zoom photography, use the optical zoom.
i Pay attention to picture composition.
NOTE
i When shooting with a wide-angle setting, or if you intend to enlarge the
photo, the higher the resolution, the better.
i To zoom in on distant scenery, it’s better to use the optical zoom. Using the
digital zoom produces a coarser image. Hold the camera securely, keeping
your elbows close to your body and making sure the camera is stable.
Using a tripod or other means of stabilizing the camera will increase the
likelihood of getting a clear photo.
Don’t forget to pay attention to picture composition; note perspective and be
aware of how the placement of objects affects the scene.
197 English
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS CONCERNING THE CAMERA
WARNING
k Do not use while driving
i Do not capture images, play back images, or watch the LCD
monitor while driving a vehicle. Doing so may cause an
accident.
i Be careful where you put down the camera inside an
automobile. During sudden stops or turns it may fall behind
the brake pedal and prevent braking.
SAFETY MANUAL
k Be aware of your surroundings when using the camera
i Pay close attention to your surroundings when using the
camera. Failure to do so may lead to an accident or injury.
i When using the camera while walking, be very careful of
your surroundings and especially the traffic to avoid
accidents.
i Do not use the camera inside an airplane or elsewhere
where its use may be restricted. Doing so may cause an
accident.
USING YOUR DIGITAL CAMERA
SAFELY AND CORRECTLY
k Do not get the camera wet
i This camera is not water-resistant. Do not allow it to get
wet, as doing so may cause a fire or electric shock.
i Do not use the camera in a bathroom.
i If the camera gets wet, immediately turn it off and remove
the battery pack. Then take it to a dealer for repair. Using
the camera after it has been become wet may cause a fire,
electric shock, or other accident.
k Do not place on an unstable surface
i The camera may fall, resulting in damage to the camera or
injury.
i If the camera has fallen and its body is damaged, turn it off,
remove the battery pack, and take it to the dealer for repair.
Using the camera after its body has been damaged may
cause a fire or electric shock.
i Before using your camera, please read and understand these safety
instructions as well as the instruction manual for your camera.
i Keep all manuals in a safe place for later reference.
i These safety instructions cover both the camera and its accessories.
Depending on which product was purchased, the camera specifications
and accessories may differ.
k Do not look through the camera into the sun
i Do not look through the camera at the sun or any other
strong source of light. Doing so may seriously injure your
eyes.
k Do not use the flash close to a person’s face
i To prevent possible eye injury, do not use the flash near a
person’s face. If the flash is used close to a person’s
opened eyes, there is a risk that it may damage that
person’s eyesight. Especially with young children or babies,
use the flash from a distance of at least 1 meter away.
k Do not use where there is risk of explosion
i Do not use the camera in a location where there is
explosive gas, or any other flammable material in the air.
Doing so may cause a fire or an explosion.
CAUTIONS CONCERNING BOTH CAMERA AND ACCESSORIES
WARNING
CAUTION
k Cautions when carrying the camera
i Do not walk around with the camera suspended from your
neck or dangling from your wrist. It may hit other objects
and get damaged. When walking around, hold the camera
in your hand or place it in a pocket.
i Be careful not to drop the camera or subject it to strong
shocks.
i Make sure direct sunlight does not hit the camera lens, as
that may damage the internal parts. When not using the
camera, be sure to always turn it off and confirm that the
lens is covered.
k If a device makes a strange noise, emits a strange odor, or
if smoke comes out from it, immediately turn off the power
and proceed as follows
i If a device is used under these conditions, it may cause a
fire or electric shock.
1 Turn off the device.
2 When use the docking station or AC adaptor/charger,
unplug the power cord from the power outlet.
3 Remove the battery.
i After completing these actions, wait to make sure no more
smoke comes from the device. Then take it to the dealer for
service. Do not try to repair or open the device yourself.
k If the camera is not going to be used for a long period of
time
i For safety’s sake, remove the battery pack from the camera.
This will prevent any possible excess heat or leakage of
battery fluid that may result in injuries or damage to nearby
objects.
k Do not use during a storm
i To avoid the risk of being struck by lightning, do not use the
devices during a thunderstorm. In particular, if used in an
open field, you have an increased chance of being struck by
lightning. Quickly seek refuge in a place that will protect you
from lightning.
k Cautions during use and storage
k Keep the devices out of the reach of children
i The following may happen if children play with the devices:
h They may wrap the neckstrap around their neck and
suffocate.
i This camera is a precision instrument. It should not be used
or stored where there are extreme changes in temperature
or humidity, or where it may be exposed to water or dust.
h They may swallow the battery or other small parts. In
such a case, consult a physician immediately.
h They may damage their eyesight if the flash goes off too
close to their eyes.
Operating environment:
i Temperature 0 to 40°C (32 to 104°F) (operation)
–20 to 60°C (–4 to 140°F) (storage)
30 to 90% (operation, no condensation)
10 to 90% (storage, no condensation)
i Humidity
h They may get hurt by the camera or other devices.
k Do not disassemble or modify
i It is dangerous to touch the inside of the devices. Doing so
may cause a fire or electric shock.
i The camera, especially, incorporates high-voltage circuits.
i Any internal check, setting, or repair should be performed
by the dealer.
k Do not cover or wrap the camera in a cloth or blanket
i It may generate heat and cause the casing to warp or cause
a fire.
i Do not use the AC adaptor as a direct current generator.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS CONCERNING THE DOCKING STATION AND AC ADAPTOR/CHARGER
DANGER
CAUTION
k Do not recharge a battery pack other than the specified
battery pack
k Do not place on an unstable surface
i If may fall, resulting in damage or injury.
i Recharging a dry-cell battery or other type of rechargeable
battery may cause excess heat, combustion, or leakage,
and cause a fire, injuries, burns, or damage to nearby
objects.
i If it falls and the body is damaged, remove the battery pack
and contact the place of purchase. If used while damaged,
it may cause a fire, electric shock, or other damage.
k Other cautions
k Concerning the power cord
i Use only the supplied or specified docking station and AC
adaptor/charger with your camera.
i If a docking station or AC adaptor/charger other than the
ones specified is used, it may damage the camera and
cause a fire or electric shock.
Use the supplied or specified docking station and AC
adaptor/charger only with the specified camera. Do not
connect to other cameras, as doing so may result in
damage.
i The voltage rating for the power cord supplied with this
camera conforms to the standards of the country in which
the camera was sold.
k Do not get the docking station or AC adaptor/charger wet
i Make sure they do not get wet, as doing so may cause a fire
or electric shock.
i Do not use them in a bathroom.
i If the docking station or AC adaptor/charger gets wet,
immediately unplug it from the power outlet and remove the
battery pack. Then contact the place of purchase. If used
while wet, it may cause a fire, electric shock, or an accident.
k Cautions during use and storage
i Do not use or store close to a heat source (close to a stove
or heater) or leave it exposed to direct sunlight, as doing so
may result in defective operation or damage.
Operating environment:
i Temperature 0 to 40°C (32 to 104°F) (charging)
–20 to 60°C (–4 to 140°F) (storage)
20 to 80% (charging and storage)
i Humidity
i To avoid the danger of possible fire, be sure to remove the
power cord from the power outlet before leaving home for a
trip or if otherwise the devices will not be used for a long
time.
WARNING
k Cautions when plugging in the power cord
i Securely plug the power cord all the way into the power
outlet. If the docking station or AC adaptor/charger is used
with the power cord not fully plugged in, heat may be
generated and cause a fire.
i Do not use if the power cord is damaged or cannot be
correctly plugged into the power outlet. Using in this
condition may cause a fire or electric shock.
i Do not allow dust, etc., to build up on the power cord or
power outlet. A build-up of dust may cause a short circuit or
generate heat and cause a fire. Use a dry cloth to remove
dust or dirt build-up after unplugging the cord from the
power outlet.
i When unplugging the power cord, be sure to hold the plug
part and slowly pull it out of the power outlet. Pulling the
cord portion may damage the power cord and cause a fire
or electric shock.
CAUTIONS CONCERNING THE CARD
k Do not damage the power cord
i Do not place heavy objects on the power cord. Do not place
the power cord near a heat source. Do not excessively bend
the power cord, modify it, or secure it with staples. Doing so
may damage the power cord and cause a fire or electric
shock.
i If the power cord is damaged, or if it does not plug properly
into the docking station, AC adaptor/charger or wall outlet,
contact the place of purchase.
CAUTION
k Cautions concerning the card
i Immediately after use, the card will be very hot. Before
removing the card, turn off the camera and wait for the
temperature to cool down.
i Keep out of the reach of children. Young children may put
the card in their mouth and choke or cause some other
unexpected injury or accident.
k Cautions concerning the power cord
i Do not leave the power cord plugged into an electrical outlet
while the other end is not plugged into the AC adaptor/
charger. The loose end can cause electrocution if touched
with wet hands or if handled by children.
k Cautions when handling the cards
i The cards are precision devices. Do not bend, drop, or
subject them to strong forces or shocks.
i Use only the supplied power cord. If a different power cord
is used, it may be rated for a different current load, and that
may cause a fire.
i The supplied power cord is for exclusive use with the AC
adaptor/charger supplied with your camera. Do not use it
with other devices, as doing so may cause a fire or electric
shock.
i Avoid using or storing the cards in places with extremely
high or low temperatures, subject to direct sunlight, in a
completely closed vehicle, near air conditioners or heaters,
or in humid or dusty locations.
i Avoid using or storing the cards in locations where strong
static electrical charges or electrical noise can be easily
generated.
i Do not use a bundled power cord, as the heat generated
may cause a fire.
i Do not allow the edges of the cards to become
contaminated with foreign materials. Gently wipe away any
contamination with a soft, dry cloth.
i Do not carry the cards in trouser pockets, as the cards may
become damaged when you sit down or make other
movements that may apply force.
k Do not touch the power cord plug with wet hands
i Doing so may cause an electric shock.
i Before using a new card or a card that was used in other
equipment, be sure to format it using the camera. Please
see the Instruction Manual for information regarding how to
format the card.
i When buying commercially available products, carefully
read the instructions and warnings that come with the card.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS CONCERNING THE BATTERY
Battery type and danger level
(Note: The cautionary notes differ depending on the
model you purchased. Please check the safety
precautions corresponding to your model.)
Rechargeable Li-ion
battery pack
Alkaline
batteries
Lithium battery
for remote
control unit
SAFETY PRECAUTIONS
k Use only batteries manufactured by SANYO
i Do not use batteries other than the specified model numbers from SANYO. Especially for safety
purposes, do not use imitation products. If dry-cell batteries or other rechargeable batteries are
used, the batteries may generate heat, rupture, or leak and result in fire, injury, burns or damage to
surroundings.
DANGER
—
k If there is leaking, discoloration, change of shape, rise in temperature, damaged exterior,
strange odor or any other abnormal condition, immediately discontinue use and remove the
battery from the camera, taking care to keep it well away from fire
i Continuing to use the battery under any of these conditions may result in fire, injury, explosion or
other serious damage.
DANGER
WARNING
i If battery fluid is leaking, placing the battery in close proximity to a fire or other heat source may
ignite the battery fluid and result in fire, damage, eruption of battery fluid, or smoke fumes.
k Do not transform, take apart, or modify
i Any modification, by transforming, disassembling, or directly soldering to the battery, etc., will
possibly cause the battery to catch fire, explode, or leak or spew battery fluid.
DANGER
DANGER
DANGER
DANGER
WARNING
k Do not connect the (+) and (–) terminals with a wire or other metal implement. Do not carry
loose or keep with necklaces, hairpins, etc.
i Doing so may result in a short circuit, high voltage flow, fire, explosion, leaking or spewing battery
fluid, or heat generation. Metal such as a wire or necklace, etc. may cause heat to be generated.
WARNING
WARNING
WARNING
k Do not throw the battery in the fire or subject it to heat
i Doing so may cause the insulation to melt, damage the gas discharge valve and safety
mechanisms, or ignite the battery fluid, resulting in fire or explosion.
k Do not drop, hit, or submit the battery to strong shocks
i If the safety mechanisms and protective devices are broken, an abnormal chemical reaction may
occur inside the battery, or cause the battery to catch fire, explode, leak or spew battery fluid, or
generate heat.
k Do not allow the battery to come into contact with fresh or salt water, or allow the terminals to
become wet
i If the safety mechanisms and protective devices are damaged by corrosion, an abnormal chemical
reaction may occur inside the battery, or cause the battery to catch fire, explode, leak or spew
battery fluid, or generate heat.
DANGER
WARNING
k Use only the supplied or specified docking station and AC adaptor/charger
i If another charger is used, the battery pack may be overcharged, or recharged with an abnormal
voltage, causing an abnormal chemical reaction to occur, or cause the battery pack to catch fire,
explode, leak or spew battery fluid, or generate heat.
DANGER
DANGER
DANGER
—
k Use the battery pack only in the specified device
i If the battery pack is used in a device other than that specified, it may cause an abnormal voltage
flow, or cause the battery pack to catch fire, explode, leak or spew battery fluid, or generate heat.
WARNING
WARNING
k Do not peel or damage the outer casing
i Damaging the outer case, inserting nails, hitting with a hammer, stepping on the battery pack, etc.
may cause a short circuit inside the battery or cause the battery pack to catch fire, explode, leak or
spew battery fluid, or generate heat.
k If the battery is leaking and the battery fluid gets on your skin or clothing, immediately rinse
with clean water
i If the battery fluid gets into your eyes, you risk losing your eyesight. Immediately rinse your eyes
with clean, running water, and seek medical attention right away. Any battery fluid that comes into
contact with your skin or clothing may harm your skin. Immediately rinse the area with clean,
running water.
DANGER
DANGER
WARNING
WARNING
k Insert the battery correctly, as indicated
i When installing the battery, pay attention to the indicated polarity (+ and –), and insert it correctly.
i If the battery pack is installed with the wrong orientation, it may cause an abnormal chemical
reaction while in the charger, an abnormal voltage flow when it is used, or cause the battery to
catch fire, explode, leak or spew battery fluid, or generate heat.
k Always stop the recharging after the prescribed recharge time, even if the battery pack is not
fully charged
i If you continue to recharge the battery pack, it may cause the battery pack to catch fire, explode,
leak or spew battery fluid, or generate heat.
WARNING
CAUTION
—
—
k Charge the battery pack before using it
F
E
i Always recharge the battery pack before using it for the first time, or when using it after it has been
kept in storage for a long time. During recharging, the battery pack may be warm. This is normal
and does not indicate a malfunction.
k Note concerning the battery after use
i When removing the battery, turn off the camera and allow the battery to cool down before removing
it.
CAUTION
—
k Disposal of and recycling the battery
i When disposing of used batteries, please consult the laws and regulations in your area for proper
battery disposal.
i Lithium-ion batteries: To conserve the environment and for efficient use of natural resources,
please discharge the used battery, cover the (+) and (–) terminals with tape and recycle the
insulated battery.
CAUTION
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS CONCERNING THE BATTERY
k Cautions concerning use and storage of the rechargeable Li-ion battery
pack
Batterij niet
weggooien, maar
inleveren als KCA.
NL
i Temperature when using or recharging: 0 to 40°C (32 to 104°F)
i Do not use, recharge, store or leave the battery pack near fire or inside a
car exposed to the hot sun, etc. (locations in which the temperature
reaches 60°C [140°F] or higher).
i At high temperatures, the safety mechanisms and protective devices inside
the battery pack may be damaged by corrosion, causing an abnormal
chemical reaction to occur, or cause the battery pack to catch fire, explode,
leak or spew battery fluid, or generate heat. If the safety mechanisms and
protective devices are damaged, the battery pack will become unusable.
i An environment with extremely high or low temperatures will cause the
battery capacity to deteriorate and shorten the usable time, and may even
shorten the battery life.
k General precautions concerning the batteries (when using alkaline
batteries)
i Use only alkaline batteries or other specified batteries in this camera.
Manganese batteries cannot be used, as they have a short battery life
and may overheat, causing damage to the digital camera.
i Use of an alkaline battery together with a Ni-Cd battery, or a new battery with
an old or consumed battery, may generate heat or cause the batteries to leak,
resulting in fire, injury or burns, or damage to the camera and any other
nearby object.
i Use of batteries without protective casings or other inferior products may
cause a fire, injury, or burns.
i Do not attempt to recharge dry-cell batteries.
i Avoid storing the battery pack with it near full charge. It is recommended to
store the battery pack when it is near fully discharged.
i If the digital camera is not going to be used for a long period of time, remove
the batteries and store them in a cool place. (When the batteries are removed
for a long period, the time and date settings will be cleared.)
i If using rechargeable batteries instead of alkaline batteries, use after fully
recharging with the exclusive battery charger. Be sure to read and
understand the instruction manuals that may come with the batteries you
purchase, as well as the instruction manual for the battery charger, before
use.
i If the battery pack is completely discharged, it may become unable to be
recharged again. To avoid this, charge the battery pack for at least five
minutes every six months.
i Storage temperature: –10 to 30°C (14 to 86°F)
When not using the battery pack, remove it from the camera and store at –10
to 30°C (14 to 86°F) in a place with no condensation.
i Humidity: 10% to 90% (no condensation)
FOR CORRECT USE OF YOUR CAMERA
k Cautions before capturing important images
k Cautions concerning condensation
i Before capturing important images, make sure that the camera is operating
properly and in condition to capture the images properly.
i Sanyo Electric shall not be held responsible for any losses that result from
images that could not be recorded, are erased, destroyed, or damaged in
any way due to a problem with the camera, any of its accessories, or its
software.
i Using the camera with condensation inside it may damage the camera.
If condensation seems likely to form
i Place the camera in a plastic bag and seal it, and then wait until the camera
has reached the ambient temperature.
Be careful of condensation under the following conditions
i When moving the camera suddenly from a cold place to a warm place.
i When the ambient temperature changes drastically, such as when a heater is
turned on to quickly heat the room.
i When the camera is placed in the path of cool air from an air conditioner.
i When the camera is placed in a location of high humidity.
k Caution concerning copyrights
i The images you capture with your camera are for your own private use; any
other use may violate the rights of copyrights owners.
i Please note that photography may be restricted at stage performances,
shows or exhibitions, even in presentations whose purpose is entertaining or
amusing individuals.
i Also note that images that are intended to be copyrighted cannot be used
outside those limits defined by the regulations of the relevant copyright laws.
k Caution concerning undesired interference
i The camera may create undesired interference if used close to a television or
radio. To avoid this type of interference, make sure the cores on the supplied
cables are not removed.
k Cautions when cleaning the camera
Dedicated USB interface cable
Dedicated S-AV interface cable
Cleaning procedure
1 Turn off the camera and remove the battery pack.
(For safety, remove the power cord plug of the AC adaptor from the power
outlet.)
Core
Core
2 Remove the dirt with a soft cloth.
*
The type (shape) and quantity of cable(s) supplied may differ depending on
which product was purchased.
If the camera is extremely dirty,
3 Wipe with a soft cloth moistened with a mild detergent diluted with water and
i If the docking station or AC adaptor/charger is used in close proximity to a
radio or TV set, it may cause interference such as static in AM broadcast
signals or noise in the TV image. In this case, increase the distance between
the radio or TV and the device.
wrung dry.
CAUTION
i Do not use benzene or thinner products to clean the camera. Doing so may
cause deformation, discoloration, or paint peeling. When using a chemically
treated cloth, carefully read its instructions and warnings.
i Do not spray insecticides or volatile sprays on the camera. Do not let rubber
or vinyl objects contact the camera for a long period. They may cause
deformation, discoloration, or paint peeling.
k Caution concerning magnetism (for cameras with a speaker)
i Do not place credit cards, bank cards, floppy disks, or other items that may be
damaged by magnetic fields near the speaker. Data may be lost or the
magnetic strips on cards may be damaged.
k Caution concerning the battery pack
k Cautions concerning data storage
i Periodically clean with a dry cloth the terminals (contacts) of the battery pack.
Do not touch the battery terminals with your bare hands. Doing so will allow
contaminants from your hands to adhere to the terminals and oxidize,
increasing the contact resistance. If the contact resistance increases, the
usable life of the batteries will diminish.
i It is recommended that any important data be copied onto a separate media
(such as a hard disk, MO disk, or CD-R disk).
i Stored data may be lost (or corrupted) in cases such as those listed below.
i Sanyo Electric will not be held responsible for any damage or lost profits
arising from the loss of data.
h If the card is used incorrectly.
h If the card is not inserted correctly into the camera.
h If the card is subjected to electrical or mechanical shocks or other forces.
h If the card is removed from the camera or if the camera is turned off during
reading or writing operations.
k Caution when cleaning the lens
i If the lens gets dirty, use a commercially available air blower or a cleaning
cloth for photographic equipment to clean it.
h If the card has reached the end of its usable life.
k When not using the camera for a long period
i Remove the battery pack. However, when the battery pack is removed for a
long time, the camera functions may begin to not work properly.
Periodically reinstall the battery pack and check the camera functions.
i If the battery pack is left in the camera, a small amount of power is still used
even if the camera is turned off. If a rechargeable battery pack is left in the
camera for a long period, it may become completely discharged and lose its
ability to be recharged again.
k Caution concerning high temperatures
i During shooting, when the internal temperature of the camera becomes high,
the \ icon will appear on the LCD monitor. When the \ icon appears, it
is still possible to capture and play back images for a while. However, if the
temperature rises further, it will become impossible to record (although
playback will still be possible). In this case, discontinue shooting as soon as
possible, and wait until the temperature falls before using the camera again.
Note that particularly when recording video clips, soon after the \ icon
appears, the remaining recording time indication will appear, and when that
figure becomes 00:00:00, further recording is impossible.
SANYO Electric Co., Ltd.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO Software Pack 7.7
For Digital Movie Camera
INSTRUCTION MANUAL
Please read these instructions carefully before using. Be sure to keep this manual
for later reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTENTION
Regarding permission to use the CD-ROM
h This CD-ROM may not be reproduced without permission.
h When installing the software in this CD-ROM, permission is granted for
its use only if the user agrees to the terms and conditions that are
displayed at the start of installation.
h Regarding products by other manufacturers that are specified on this
CD-ROM, and for service, please inquire of the respective
manufacturer.
i It is strictly forbidden to copy this manual, wholly or in part, without prior
written permission.
i The contents of this manual are subject to change without prior notice.
i Sanyo Electric shall not be held responsible for any problems resulting
from the use of this product.
i Sanyo Electric declines all responsibility for damages due to improper use
of this product, failure to adhere to the instructions given in this manual, or
repairs or changes done by those other than a technician authorized by the
manufacturer.
i Sanyo Electric shall not be held responsible for any damage caused by
optional devices or consumable items used with this product other than
those supplied with this product or those specified by Sanyo Electric.
i Sanyo Electric shall not be held responsible for any losses or loss of
revenue resulting from the loss of data caused by the malfunction, or the
repairing of a malfunction, of this product.
i
English
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHTS
This manual and the software are copyrighted materials from Sanyo Electric
Co., Ltd.
PowerPC is a registered trademark of International Business Machines Corp.
(USA)
Macintosh and QuickTime are registered trademarks of Apple Computer, Inc.
in the USA and other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the USA and other countries.
DirectX is a registered trademark of Microsoft Corporation in the USA and
other countries.
Intel and Pentium are registered trademarks of Intel Corporation (USA).
All other brand or product names mentioned in this manual are trademarks or
registered trademarks of their respective companies.
1
English
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
INTRODUCTION ....................................................................................3
About this manual ............................................................................3
The software ....................................................................................4
CD-ROM directory map ...................................................................5
OPERATING ENVIRONMENT ...............................................................6
Windows ..........................................................................................6
Macintosh ........................................................................................7
BEFORE MOUNTING YOUR CAMERA .................................................8
Cautions when using the camera as an external drive ....................8
Operating environment ....................................................................8
Data file formats ..............................................................................9
Configuration of directories in the card ..........................................10
Setting to the card reader mode ....................................................11
To play back in the HD mode or a 60 fps video clip ......................12
For Windows XP users ..................................................................13
For Windows Me/Windows 2000 users .........................................14
For MAC OS 9.xx users ................................................................15
For MAC OS X users .....................................................................15
INSTALLING THE APPLICATION SOFTWARE ..................................16
Windows ........................................................................................17
Macintosh ......................................................................................18
HOW TO USE Photo Explorer ..............................................................19
Set up the environment .................................................................19
Copying image data to a computer ...............................................21
USING AS A PC CAMERA ...................................................................23
Before connecting your camera to a computer .............................23
Connect your camera to a computer .............................................24
ABOUT MovieFactory ...........................................................................26
Main features .................................................................................26
Additional features .........................................................................27
ABOUT Motion Director ........................................................................28
Importing .......................................................................................28
Output format and playback ..........................................................28
English 2
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
This manual describes how to install and operate the SANYO Software Pack.
Please read this manual carefully, in order to use the images and audio
recordings captured with your camera in a wide range of applications.
About this manual
The explanations in this manual conform to the following conventions.
i The examples given in this manual are generally based on a Windows
environment. For Macintosh users, while the menu names and screen
indications may be different, this is no impediment to understanding the
operation. In those places where the operations for Macintosh users and
Windows users differ, specific explanations are provided.
i In this manual, the SD Memory Card is referred to as “card”.
h This manual is designed for users with the following computer skills:
h Knowledge of basic computer operations
h Knowledge of basic mouse operations
h Knowledge of how to open, close, move, minimize and maximize
windows
h Knowledge of how to move from one folder to another folder
Detailed information about the operations listed above can be found in the
printed or online manuals accompanying the computer or operating system
software.
Symbols used in this manual
HINT
Extra information about software or cautionary notes.
CAUTION Points requiring special attention.
(page xx) Refer to the page indicated for detailed information.
3
English
Download from Www.Somanuals.com. All Manuals Search And Download.
The software
The following software applications are in the SANYO Software Pack.
Please see page 16 for a summary of each software program.
i QuickTime 7.0
In this manual, referred to as QuickTime.
i Ulead Photo Explorer 8.5 SE Basic (Windows)/Photo Explorer for Mac 2.0
(Macintosh)
In this manual, referred to as Photo Explorer.
i Motion Director SE 1.1 (Windows)
In this manual, referred to as Motion Director.
i Ulead DVD MovieFactory 5.0 SE (Windows)
In this manual, referred to as MovieFactory
* PhotoExplorer and MovieFactory both support the MPEG-4 format.
Installing these application software will allow you to view MPEG-4 files.
English 4
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ROM directory map
Below is a directory map of the SANYO Software Pack contents.
<Windows>
h Disc1
h Disc2
SanyoDisc1 ( :)*
SanyoDisc2 ( :)*
D
D
QuickTime
PhotoExplorer
MotionDirector
DVD MovieFactory
* The drive name (D:) may be different on your computer.
<Macintosh>
h Disc1
SanyoDisc
PhotoExplorer
5
English
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING ENVIRONMENT
The operating environments for the respective application software are as
shown below.
Concerning the operating environment when handling HD mode or 60 fps
video clips, please see page 12.
Windows
Software
CPU
Pentium
or faster
Memory
Hard drive
OS
11 MB
or more
QuickTime
128 MB or more
Pentium III
800 MHz
or faster
Photo
Explorer
Windows
2000 SP4
or later
Windows
XP SP2 or
later
256 MB or more
(512 MB
recommended)
Pentium III
1 GHz
or faster
Motion
Director
950 MB
or more
Pentium III
800 MHz
or faster
Movie
Factory
512 MB or more
Other
Direct X9.0 or later
English 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Macintosh
Hard
drive
Software
CPU
Memory
OS
Mac OS 9.0 or
later (CarbonLib
1.4 or more);
Mac OS X 10.1
or later
Power PC
or later
64 MB
or more
20 MB
or more
Photo Explorer
7
English
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE MOUNTING YOUR CAMERA
The following is an explanation of the format of data recorded by your
camera, as well as the configuration of directories in the card.
Cautions when using the camera as an external
drive
i Do not alter files or folders in your camera in any way. Doing so may result
in your camera not recognizing that data.
If you want to edit files, first copy them to your computer’s hard drive.
i Cards formatted on your computer cannot be used by your camera. Format
all cards to be used by your camera with your camera.
Operating environment
Windows
A computer with a standard-equipped USB port, and preinstalled with
Windows 2000, Me or later is required. Correct operation cannot be
guaranteed for models with upgraded Windows systems.
Macintosh
A model with a standard-equipped USB port, and preinstalled with Mac OS
9.0, 9.1, 9.2, Mac OS X 10.1 or later is required.
English 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Data file formats
The format of the files saved on the card and the method in which the file
names are determined are explained below.
Type of data
Data format
File name structure
File name begins with SANY.
Extension is “.jpg”.
SANY****.jpg
Still image
data
JPEG
File name begins with SANY.
Extension is “.mp4”.
SANY****.mp4*
Video clip
data
MPEG-4
Audio
recording
data
File name begins with SUND.
Extension is “.m4a”.
SUND****.m4a*
MPEG-4 Audio
(AAC compression)
* Consecutive numbers assigned in the order the data was saved.
9
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration of directories in the card
ROOT
DCIM
100SANYO
SANY0001.jpg
SANY0002.jpg
SANY0003.mp4
SUND0004.m4a
SANY0005.jpg
Image
Folder number
number
MISC
(Location
of DPOF
files)
Image or
audio
recording
number
101SANYO
102SANYO
SANY0001.jpg
SANY0002.jpg
SANY9999.jpg
SANY0001.jpg
SANY0002.jpg
* Up to 9,999 files can be stored in folder 100SANYO. If more files are made,
a folder named 101SANYO is created, and they will be stored in there. New
folders will then be named in sequence, i.e., 102SANYO, 103SANYO, etc.
HINT
About the volume name
i
The volume name will be [XACTI HD1A] for a card that was formatted with the
camera, and [Removable disc] for a card that was formatted with a computer.
About video clip data recorded with this camera
i You can use Apple’s QuickTime 6.3 or later version to play back video clips
on a computer. Playback may also be possible using other software that
supports the ISO standard MPEG-4 (AAC audio). QuickTime 7.0 for
Windows is supplied with the included CD-ROM (SANYO Software Pack).
About audio data recorded with this camera
i If you change the extension (.m4a) of audio data files to “.mp4”, playback
may be possible using software that supports the ISO standard MPEG-4
(AAC audio).
About file names when the card is replaced...
i If the file number reset function is set to off, even when the card is
replaced, consecutive numbering of folder numbers and file names
continues from the previously installed card (see page 141 in the camera’s
instruction manual).
CAUTION
If you intend to view the images on the camera, do not use a computer
to rewrite the card data.
i If the folders, file names, or their configuration is modified using a personal
computer, it will be impossible to play back the data using the camera, and
the camera may not operate properly.
English 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting to the card reader mode
1
2
Start your computer, and use the supplied USB interface cable to
connect the docking station to the computer.
h Connect the docking station’s USB/AV terminal to the computer’s USB
connector.
Press the ON/OFF button to turn the camera on, and set the camera
in the docking station.
h The USB Connection Screen appears on the camera’s monitor.
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
USB/AV terminal
To AC adaptor
To USB connector on the computer
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
3
Select “CARD READER”, and press the SET button.
h When the camera’s monitor unit is closed and the camera is set in the
docking station, press the operation mode button [
station.
] on the docking
11 English
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
i Please connect the dedicated USB interface cable to your computer’s USB
connector. Do not connect it to the USB port on your monitor or keyboard,
or to the USB hub. Be especially careful when installing the driver
software. In some instances, it may not be possible to correctly install the
driver software.
To play back in the HD mode or a 60 fps video clip
The computer or application software operating environment to play back
video clips recorded in the U, V or T mode is as shown below.
®
®
Windows
Macintosh
®
Mac OS X 10.3.6 or later
(QuickTime 6.5.2 or later)
OS*
Windows 2000 SP4 or later/
®
Windows XP SP2 or later
(QuickTime 7.0.1 or later)
CPU
UV
Pentium 4, 3.0 GHz or more
T
Power PC G5 1.6 GHz or
more
Pentium 4, 2.4 GHz or more
Memory 512 MB or more (1024 MB or
more recommended)
512 MB or more
Video
64 MB or more (128 MB or more 64 MB or more
memory recommended)
*: Limited to models with the operating system pre-installed.
English 12
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows XP users
Mounting your camera
1
Set the camera to the card reader mode (page 11).
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h The card is recognized (mounted) as a disk, and the [XACTI HD1A
(E:)] window opens.
* The drive name (E:) may be different on your computer.
Select an action.
2
h Select the desired procedure from the [XACTI HD1A (E:)] window.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
Left-click on the icon for safely removing hardware.
h A list appears showing the devices connected to the computer’s USB
connector.
2
Left-click on the camera drive (E:).
h The camera can now be disconnected.
* The drive name (E:) may be different on your computer.
13 English
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows Me/Windows 2000 users
Mounting your camera
1
Set the camera to the card reader mode (page 11).
h If a message appears on the computer monitor instructing you to load
the Windows CD-ROM, follow the instructions and install the driver.
h The camera is recognized as a drive, and [XACTI HD1A (E:)] appears
in the [My Computer] window.
* The drive name (E:) may be different on your computer.
h The card is recognized (mounted) as a disk.
h Double-click on the [XACTI HD1A (E:)] icon in [My Computer], and
you can process the contents of the card installed in your camera
exactly like you would the data in the other computer drives.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
2
3
Left-click on [Unplug or Eject Hardware] in the task tray.
h A list appears showing the devices connected to the computer’s USB
connector.
Left-click on the camera drive (E:).
* The drive name (E:) may be different on your computer.
h The [Safe to Remove Hardware] dialog box will open.
Click on the [OK] button.
h You can now disconnect the camera.
English 14
Download from Www.Somanuals.com. All Manuals Search And Download.
For MAC OS 9.xx users
Mounting your camera
1
Set the camera to the card reader mode (page 11).
h The camera is recognized as a drive and appears as an icon named
[XACTI HD1A] on the Desktop.
h Double-click on the [XACTI HD1A] icon, and you can process the
contents of the card installed in your camera exactly like you would the
data in the other computer drives.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
Drag the [XACTI HD1A] icon for your camera on the Desktop to the
trashcan.
h The [XACTI HD1A] icon disappears from the Desktop.
h You can now disconnect your camera.
For MAC OS X users
Use the same mounting and dismounting procedure as for the MAC OS
9.xx. However, if an application which automatically recognizes camera
images is installed, it will be activated.
CAUTION
When using in a Mac OS X Classic environment
i It is not possible to save or load data directly to or from the card installed in
the camera. The data must first be saved once to your hard disk.
15 English
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING THE APPLICATION SOFTWARE
The SANYO Software Pack contains the application software indicated below.
Installation of each application will serve to optimize your use of the data
recorded with your camera.
1
i QuickTime*
Play back video clips. The recorded audio is played back at the same time.
Be sure to install this application if you are going to view video clips that
were photographed with your camera (Windows).
2
i Photo Explorer*
Organizing the data recorded with your camera is easy to understand
using the graphic screen.
2
i MovieFactory*
Use this integrated tool to store various files–such as video and music files,
photo files, data files, etc.– to disc for processing with your computer.
i Motion Director
Use Motion Director to remove motion blur from video clips captured with
your camera and to make a single panorama still shot from a video clip
recorded while panning.
*1 By upgrading from QuickTime to QuickTime Pro, you will be able to edit
QuickTime movies, among other features. You can upgrade from Apple
Computer, Inc.’s web page at http://www.apple.com.
*2 If PhotoExplorer or MovieFactory is installed on your computer, you can
use Windows Media Player to play back video clips (MPEG-4) that were
recorded with your camera.
For information about software updates, please refer to the following
website:
http://www.ulead.com/
English 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows
1
2
Insert the CD-ROM (SANYO Software Pack Disc 1 or 2) in your
computer’s CD-ROM drive.
h The installation window soon appears.
h If the installation window does not appear, double-click on the CD-
ROM icon in the My Computer window, and double-click on [Autorun]
or [Autorun.exe] in the CD-ROM window.
Click on the name of the application software you wish to install.
h The window for beginning the installation procedure for the specified
application will open.
h The installer program for each application is preset to properly install
the software. If you are unfamiliar with the computer, we recommend
clicking the [Next] button at each screen.
h If a user registration dialog box appears, do not enter anything in the
[Enter your registration information] dialog box, and click on the [Next]
button.
h If a dialog box prompting you to restart your computer appears, restart
your computer.
You can find more information about the respective applications at:
QuickTime: http://www.apple.com
Photo Explorer: http://www.ulead.com
Click on [DONE].
3
HINT
About Kodak online service
i When the installation window closes, a dialog box to connect to the
website introducing Kodak’s online service appears. To go to the website,
select the [Tell me more now !] option button. If you do not wish to go to the
website, select on the [No thanks !] option button. Click on the [OK] button.
17 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Macintosh
Photo Explorer installation
1
Insert the CD-ROM (SANYO Software Pack Disc 1) in your
computer’s CD-ROM drive.
h The CD-ROM window will open after a few seconds.
h If the window does not open, double-click on the CD-ROM icon
[SanyoDSC] on the Desktop.
2
Install the Photo Explorer.
h Open the [Photo Explorer] folder and copy the [English] folder (or
whatever other language you prefer) to your hard disk.
h When the folder has been copied, installation of the application is
completed.
HINT
About the [Carbon Lib] folder
i If your computer’s CarbonLib file (extension file) is earlier than version 1.4,
please install the CarbonLib file (in the [Carbon Lib] folder) to the extension
folder.
English 18
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE Photo Explorer
To copy data from your camera to your computer, when you open the drive for
your camera from [My Computer], options are shown for copying data to your
computer and for using Photo Explorer to copy data. Explained in this section
is how to use Photo Explorer to copy the camera’s data to your computer. For
a detailed explanation of Photo Explorer, please see the Help menu of Photo
Explorer.
Set up the environment
Specify the source of the data (data location in your camera) to be copied.
k Windows
1
Set the camera to the card reader mode (page 11).
h Open the [Ulead AutoDetector] dialog box.
h If the window showing the contents of the card installed in the camera
(XACTI HD1A (E):) is open, click on the [Close] button to close it.
In the [Ulead AutoDetector] dialog box, check the box [Always open
with the selected program], and click on the [OK] button.
h The [Copy file to...] dialog box will open.
2
h If you check the [Always open with the selected program] box, the
[Ulead AutoDetector] dialog box step will be skipped from the next
time.
Turn ON the [Open Ulead Photo Explorer to view photos] option
button, and click on the [OK] button.
Click on the digital camera wizard icon on the toolbar.
h The [Digital Camera Wizard] dialog box will open.
Click on the drive name (A:\) to the right of [Camera drive or card
reader].
3
4
5
h The [Select Image Source] dialog box will open.
Turn ON the [Camera drive or memory card reader] option button,
select the camera drive from the [Location] list box, and click on the
[OK] button.
6
h The drive name to the right of [Camera drive or card reader] is
changed to the drive specified in step 6.
h If you wish to now read the data from the card installed in the camera,
click on the [Start] button. The data from the card will be copied to My
Documents\SANYO_PEX.
h If instead you wish to discontinue after changing the settings, click on
the [Cancel] button.
h The [Digital Camera Wizard] dialog box will close.
19 English
Download from Www.Somanuals.com. All Manuals Search And Download.
k Macintosh
1
Set the camera to the card reader mode (page 11).
h The [XACTI HD1A] icon will appear on the desktop.
Open the folder in which Photo Explorer was installed, and double-
click on the Photo Explorer program icon.
2
h Run Photo Explorer.
3
4
5
Click on the digital camera wizard icon on the toolbar.
h The [Digital Camera Wizard] dialog box will open.
Click on the icon in the [Camera flash disk drive] section.
h The [Choose Removable Drive] dialog box will open.
Click on the drive for the camera connected to your computer
(XACTI HD1A), and click on the [Select] button.
h The drive name in the [Camera flash disk drive] section is changed to
[XACTI HD1A].
6
Turn ON the [Create subfolder] checkbox.
h If you wish to now read the data from the card installed in the camera,
click on the [Start] button.
h If instead you wish to discontinue after changing the settings, click on
the [Cancel] button.
English 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying image data to a computer
Copy image files to the computer from the card installed in your camera.
1
2
3
Set the camera to the card reader mode (page 11).
Run Photo Explorer.
Click on the digital camera wizard icon on the toolbar.
h The [Digital Camera Wizard] dialog box will open.
Click on the [Start] button.
4
h Copying begins.
h A folder with the name as indicated below is automatically created, to
which the data is copied.
Windows: My Documents\SANYO_PEX
Macintosh: Macintosh HD:Ulead Photo Explorer
h When copying is completed, the [Done] dialog box will appear.
When copying is completed, click on the [OK] button.
h The copied data is shown in a thumbnail window.
5
21 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Explorer features
With the Photo Explorer you have visually integrated control over multiple
files, from camera images to DV camcorder video files to audio files (such as
MP3 and WAV files).
k Manage and edit image files
Viewing images
Images can be viewed full-size or full-screen. Use the keyboard controls or
toolbar buttons to select the menu, and you can browse the images or play
them back, for example, in a slideshow.
Organizing and editing images
You can copy and erase image files, as well as change the file names. In
addition, you can rotate and flip images, and save the edited images as
new files.
Adjusting images
You can easily enhance images by clipping and adjusting the contrast,
brightness, color balance, etc. The created images can be used for
wallpaper or screen savers.
k Abundant slideshow features
Slideshows containing combinations of still images and video clips can be
played back.
k Convert the format of video clip data
Video clips (QuickTime format) that were shot with your digital camera can be
converted to other formats, such as AVI and MPEG.
k For questions about Photo Explorer
Further information about Photo Explorer can be found at
http://www.ulead.com
<Where to find the serial number>
iFrom the Photo Explorer [Help] menu, select “About Ulead Photo
Explorer”. The program version as well as the serial number are
shown.
English 22
Download from Www.Somanuals.com. All Manuals Search And Download.
USING AS A PC CAMERA
If running Windows XP, you can connect the camera to a computer and use it
as a PC camera. Before using your camera as a PC camera, please install
Windows XP SP2.
The PC camera functions can be used with Windows Messenger 5.0 or later
version, or MSN Messenger 7.0 or later version.
Before connecting your camera to a computer
Please perform the following upgrades before connecting the camera to a
computer.
i Upgrade Windows XP to SP2.
Install Windows XP SP2.
i Install Windows Messenger 5.0 or later version.
Download Windows Messenger 5.0 or later version, and install it.
i If using MSN Messenger, please install MSN Messenger 7.0 or later
version.
CAUTION
i The PC camera function can be used only with computers in which
Windows XP was preinstalled. Correct operation cannot be guaranteed for
models that have been upgraded to Windows XP.
i The zoom cannot be used with the PC camera function. Moreover, only
images can be recorded; audio data cannot be recorded.
i Although your camera can shoot at a maximum rate of 15 frames per
second, the rate at which you can broadcast in the PC camera mode may
be less than this depending on the speed of your Internet connection.
23 English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect your camera to a computer
1
2
Start your computer, and use the supplied USB interface cable to
connect the docking station to the computer.
h Connect the docking station’s USB/AV terminal to the computer’s USB
connector.
Press the ON/OFF button to turn the camera on, and set the camera
in the docking station.
h The USB Connection Screen appears on the camera’s monitor.
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
USB/AV terminal
To AC adaptor
To USB connector on the computer
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
English 24
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select “PC CAMERA”, and press the SET button.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
HINT
If the [USB Video Device] icon does not appear in the [My Computer]
window...
i The device driver installation may not have been successful. Open the
[Printer and Other Hardware] folder in [Control Panel], delete [USB Video
Device] from [Scanners and Cameras], and reinstall the device driver.
25 English
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT MovieFactory
MovieFactory is an integrated tool for processing and storing video, music,
photo and data files to disc with your computer.
The limited edition contained in the SANYO Software Pack comprises DVD
authoring functions only.
For information concerning how to use MovieFactory, click on [Program] →
[Ulead DVD MovieFactory 5] → [User Manual], and select [DVD MovieFactory
User Guide] to access the user’s manual.
Main features
i Create your own movie discs
Create your own movies in DVD or Video CD format. Download image data
from a DV camera, digital movie camera, digital camera, video tapes and
TV programs, for example, add effects, and then save the edited data on a
disc.
i Edit HD mode video clips
Now you can edit video clips that were recorded in the HD mode without
converting the video files from the HD MPEG4 format.
i Make slideshows
Create a slideshow of the still images etc. captured with your digital
camera, and store them to DVD or CD. Ideal for sorting and managing your
photos.
i Capture directly to disc
Burn DVD discs directly from your DV camera, video tapes, TV programs,
etc., while you view them in realtime.
i Disc copy
It’s easy to make disc-to-disc copies. Works for any kind of disc–DVDs,
music CDs, MP3 files, your homemade discs, data discs.
CAUTION
i Note that MovieFactory cannot be used to successfully record to DVD from
media which incorporate copy-protect or scrambling technologies to
protect copyrights.
English 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional features
i File format conversion
Use MovieFactory to convert the file format and image quality, then save it.
i Burn from disc images
When burning a DVD video, save an image file of the same contents on
your computer’s hard drive. Use this file to burn the data to disc.
i Labels for your discs
Print your own labels for your CDs and DVDs. (Blank labels for printing are
available commercially.)
k For questions about MovieFactory
Further information about MovieFactory can be found at
http://www.ulead.com/
<Where to find the serial number>
i From the MovieFactory environment icons
, select “About Ulead DVD
MovieFactory”. The program version as well as the serial number are
shown.
27 English
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT Motion Director
Use Motion Director to remove motion blur from video clips captured with your
camera and to make a single panorama still shot from a video clip recorded
while panning.
An outline of Motion Director is introduced below. For details, please refer to
online help for Motion Director.
Importing
Motion Director can read either of these file formats:
h MOV
h MP4
The compression coding for each is as follows:
Format
MOV
Video coding
Motion JPEG
ISO MPEG-4
Audio coding
WAVE
MP4
AAC
The frame size is VGA (640 × 480 pixels) or less.
Output format and playback
Motion Director can write files in the following formats:
Motion-blur correction: MPEG-4, MOV
Panorama composite: JPEG, BMP, TIFF, QuickTime VR
VR spatiotemporal images saved in the QuickTime VR format using Apple’s
QuickTime Player can be viewed.
English 28
Download from Www.Somanuals.com. All Manuals Search And Download.
SANYO Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|