Instruction manual
19" DIGITAL LCD TELEVISION
WITH DVD PLAYER
TV19PL120DVD
TV19PL120DVD A
Accessories
Instruction manual
Quick Set-up guide
Remote control
Battery (R-6, AA) x 2
AC mains lead
Instruction manual
19" DIGITAL LCD TELEVISION
WITH DVD PLAYER
TV19PL120DVD
TV19PL120DVD A
Accessories
Instruction manual
Quick Set-up guide
Remote control
Rattery (R-6, AA)
x
2
AC mains lead
Before operating the unit, please read this manual thoroughly.
Before operating the unit, please read this manual thoroughly.
50A0201A_cov-in.p65
1
9/12/07, 4:53 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving the unit or carrying by hand
When the unit is moved a long way, unplug the power cord and disconnect the aerial, connecting
leads and any fall-prevention apparatus.
• Moving without doing so could result in damage to the power cord, a fire, electric shocks or injuries from dropping the
unit.
The distance between eyes and the screen should be about 5 ~ 7 times as long as
diagonal length of the screen.
• Viewing from too close a distance can cause strain for your eyes.
When installing the Monitor on a table, be careful not to place the edge of its stand.
• This may cause the Monitor to fall, causing serious injury to a child or adult, and serious damage to
the Monitor.
Contents
Location of controls ......................................... Page 2
Aerial connection ........................................... Page 3
Connection to other equipment ..................... Pages 4-6
PC Connection ........................................... Pages 7-8
Connecting an HDMI or a DVI device to the
Channel list.................................................. Page 26
Channel banner ........................................... Page 27
Multi audio .................................................. Page 28
DVB-Subtitle ................................................. Page 28
DVB Text ...................................................... Page 29
EPG (Electronic Program Guide) ..................... Page 30
EPG Timer.................................................... Page 31
Disc ............................................................ Page 32
Playing a disc ........................................ Pages 33-35
Zooming...................................................... Page 36
Locating Desired Scene ................................. Page 36
Marking desired scenes................................. Page 37
Repeat Playback ........................................... Page 38
A-B Repeat Playback ..................................... Page 38
Changing Angles.......................................... Page 39
Title Selection ............................................... Page 39
DVD Menu................................................... Page 39
Changing Soundtrack Language..................... Page 40
Subtitles....................................................... Page 40
Disc Status ................................................... Page 40
HDMI input .................................................... Page 9
Analogue Menu System ................................. Page 10
On-screen Language Selection........................ Page 10
Auto setup ................................................... Page 11
Auto tuning .................................................. Page 12
Changing the order of stored channels ............ Page 12
Manual tuning .............................................. Page 13
Basic TV functions ......................................... Page 14
Teletext ........................................................ Page 15
Adjusting the NICAM stereo sound ................. Page 16
Picture format ............................................... Page 17
Other useful functions .................................... Page 18
Guide to using the Digital Menu System .......... Page 19
Language Setup............................................ Page 20
Auto Scan.................................................... Page 20
Manual Scan ............................................... Page 21
Carrier Setup ............................................... Page 21
Channel Organizer................................. Pages 22-23
Display Setup ............................................... Page 24
Password Setup (Parental lock) ....................... Page 24
Version ........................................................ Page 25
Software Upgrade ........................................ Page 25
Common Interface ........................................ Page 25
MP3/WMA/JPEG and Audio CD
operation............................................... Pages 41-45
Program playback ........................................ Page 46
Random playback......................................... Page 46
Customizing The Function Settings ............ Pages 47-50
Temporary Cancel The Rating Level
By DVD Disc ................................................ Page 51
Language Code List....................................... Page 52
Before Requesting Service........................ Pages 53-54
Specifications............................................... Page 55
1
50A0201A_p01-03.p65
1
9/12/07, 4:53 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of controls
Front Side
Top
Right Side
4
5
6
8
7
Disc slot
9 10 11 12
1
2
3
Description of Indicators and Controls
1. Remote sensor
2. STANDBY/TIMER/ON indicator: The LED indicator lights up red in STANDBY mode, green in the POWER ON mode.
3. Loudspeakers
4.
5.
(VOLUME) +/– Buttons: To adjust the volume. When the Menu is on the screen, these are used for changing settings.
(CHANNEL) ▲/▼ Buttons: Press ▲ to move up a channel number. Press ▼ to move down a channel number. When
the Menu is on the screen, these are used for changing settings. When the set is in standby, they can also be used to switch
the power on.
6. MENU Button: To display the menu screen.
7. TV/AV/PC Button: Selects between the TV/AV/PC input modes.
8. w (STANDBY) button: To switch between the STANDBY and POWER ON modes.
9. PLAY ( ): Playback
10. STOP ( ): Stop
11. SKIP (
/
): Skip chapter to forword or reverse direction.
12. EJECT ( ): Eject a disc.
Remote Control
Display program position number/
Select to operate TV/DVD
Teletext time display
Eject a disc
Enter standby mode or turn on the power
Select an input source
Select channel/Select Teletext page/
Enter password/
Activate the channel organizer function
Switches between the analogue TV and the
digital TV
Display the EPG (Electronic Progr. Guide)
Exit the menu screen/Cancel marking
Sleep Timer
Turn the sound on/off
Cursor buttons (C/D/A/B)
Change the TV channel or Teletext page up
or down
Volume
Call Setup menu/Activate the analogue menu
Memorize/Teletext page 100/CH LIST
Select picture format
Switches between the present channel and
the last selected channel
Activate the digital menu
Toggle between the TV and radio mode
Remove DVD set up menu
Teletext ON / TV+Text / OFF
Select menu of a DVD disc
Select title of a DVD disc
Select between the available broadcast audio/
Display the multi audio menu/
Change sound track language of DVD
Display the subtitle
Zoom (for DVD playback)
Locating desired scene
Repeat playback between A and B (DVD/CD)
Select playback mode
Hold the text page/Reverse slow motion
Change playback angle of a DVD disc/
Reveal quiz page answers
Teletext enlargement/Forward slow motion
Marking desired scene/Sub page selection
Four coloured buttons/DVD control buttons
DVD control buttons
2
50A0201A_p01-03.p65
2
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Aerial connection
Note: To avoid possible damage, before you make any connections, turn off the TV at the w
(STANDBY) button and unplug it from the mains. Once the connections are in place, re-connect
the unit to the mains and switch it back on.
Back Side
(A)
(B)
C.I.CARD
(L)
OUT
HEAD PHONE
(C)
IN
S-VIDEO
VIDEO
L
(MONO)
(D)
AUDIO
R
AV
2
(F)
DVB-T DIGITAL COMPONENT
AUDIO
OUT
Y
Pr
R
SCART
ANT
IN
HDMI
AV
1
PC/HDMI
AUDIO
OUT
PC MONITOR
Pb
(E)
L
(MONO)
AUDIO
IN
SCART
ANT
IN
HDMI
(K)
AV 1
PC/HDMI
AUDIO
PC MONITOR
(J)
(I) (H)
(G)
(A) Aerial input socket: Connect the outdoor aerial to the aerial input socket as shown.
(B) DVB Common Interface: The Common Interface allows you to insert CAM (Conditional Access Module) and
a suitable Smart Card to give you access to additional Pay-TV services (See page 25).
(C) HEAD PHONE socket: Plug headphones with a mini plug (3.5 mm) into this socket.
(D) AV2 input: Input for analogue A/V-Signal (Composite or S-Video). See page 5.
(E) COMPONENT input: See page 6.
(F) Coaxial digital audio output socket: Connect a coaxial digital audio lead from here to a suitable digital
decoder/amplifier. Only the audio from the TV’s digital tuner will be output via this socket (see page 5).
(G) PC Monitor input (PC): See pages 7 and 8.
(H) PC/HDMI Audio input socket: See pages 7, 9.
(I) HDMI input: See page 9.
(J) Scart socket (AV1): For the connection of other equipment via SCART leads (see page 4).
(K) Power supply: Connect the supplied AC mains lead. Connect to 220~240 V / 50 Hz only. Never repair a
damaged AC mains lead with isolation tape - contact your store if a new AC mains lead is required. If you have
pets in the home, please ensure that they do not bite into any of the leads, as this can be dangerous.
(L) Bracket holes: To fix a wall mounting bracket (not supplied) here.
For any wall or bracket mounting application, ALWAYS use all 4 of the fixings - failure to do this could leave the
set inadequately secured.
3
50A0201A_p01-03.p65
3
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to other equipment
Selecting the video input
1
source:
Press INPUT SELECT on the
remote control or TV/AV/PC
on the unit. The INPUT
Examples of other AV equipment that you might connect to this TV
TV (Back side view)
SELECT menu will appear.
Then press C/D to select the
video input source. Then press
ENTER within 6 seconds.
SCA RT
ANT
AV 1
ANT
AV2
AV1
TV (Left side view)
IN
S-VIDEO
L
(MONO)
AUDIO
VIDEO
R
AV
2
Antenna
Satellite antenna
Video recorder
DVD player
Satellite
receiver
INPUT SELECT
ATV
DTV
DEC
VCR
TV
AV1
AV2
COMPONENT
HDMI
(All illustrated SCART socket cables and antenna cables are not supplied)
Decoder
EXIT : END
• Make sure to disconnect the appliance from the power supply in order to avoid
any potential damage from occurring.
• Make sure to establish the required connection.
• Make sure that connections are properly and correctly attached before
connecting the appliances to the power supply.
2
Connecting a decoder
TV (Back side view)
decoder
(Illustrated SCART socket cable is not supplied)
You can use the AV1 SCART socket when connecting a decoder and other
audiovisual equipment.
4
50A0201A_p04-09.p65
4
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to other equipment
3
Connecting an audio system
TV (Left side view)
AV 2
DVB-T DIGITAL COMPONENT
AUDIO
OUT
Y
Pr
R
OUT
Pb
L
(MONO)
Surround sound amplifier system
(such as Dolby Digital/DTS/MPEG/etc.)
AUDIO
IN
Coaxial digital lead (not supplied)
The exact arrangement you use to interconnect various video and audio components
to the unit is dependent on the model and features of each component. Check the
Owner’s Manual provided with each component for the location of video and audio
inputs and outputs.
4
Connect to a Video camera or games console
Video camera
(example)
(S-VIDEO lead,
not supplied)
TV (Left side view)
IN
S-VIDEO
L
(MONO)
AUDIO
VIDEO
(AV lead, not supplied)
AV output
R
AV
2
DVB-T DIGITAL COMPONENT
AUDIO
OUT
Y
Pr
R
OUT
Pb
L
(MONO)
AUDIO
IN
Connect the Video camera (or games console) to the TV unit using the appropriate
RCA / Phono AV leads (or S-Video if applicable). Select AV2-input mode (see
page 4).
Note:
• If you have a camcorder with S-video, use an S-video lead instead of a standard
video lead. Do not connect both a standard video lead and an S-video lead at
the same time, or the picture performance will be unacceptable.
5
50A0201A_p04-09.p65
5
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to other equipment
Note:
• The Component Video
inputs on this unit can
5
Connecting to a DVD player or other AV device with Component
accept both interlaced
signals (PAL: 576i/1080i
or NTSC: 480i/1080i) and
progressive signals (PAL:
576p/720p or NTSC:
480p/720p).
Video outputs
TV (Back side view)
AV
2
DVB-T DIGITAL COMPONENT
AUDIO
OUT
Y
Pr
R
OUT
Audio lead (not supplied)
Video lead (not supplied)
Pb
L
(MONO)
AUDIO
IN
To COMPONENT IN
Component output
Y
Pb Pr
Audio output
If your DVD player (or other device) has Component Video output sockets, use a
suitable set of leads (RCA/Phono) to connect these to the Component Video
inputs on this TV as shown - it can greatly enhance the picture quality and
performance. Please remember that you will also need to connect separate leads
(RCA/Phono) for the audio signals. To view this source, select the COMPONENT
input mode (see page 4).
SETUP menu
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
6
EXIT : END
MENU: RETURN
Selecting the setting for the SCART socket
1 Press ANALOG MENU, the menu will appear on
the screen. Press B or A to select
(SETUP) menu.
AV1 OUTPUT
TV
Press C or D to select AV1 OUTPUT, then press
AV COLOUR
AUTO
OFF
ENTER.
REC SCREEN STATUS
2 Press B or A to select TV or MONITOR, then press
ENTER.
TV
TV:
Outputs the last channel position
selected on RF.
EXIT : END
MENU: RETURN
MONITOR: Shows the picture displayed on the TV-
screen.
3 Press EXIT to return to the normal screen.
6
50A0201A_p04-09.p65
6
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Connection
Use a PC-VGA lead (not supplied) to connect your PC to this unit. Plug the lead
carefully not to break or bend the contact inside of plug.
PCs are usually sup-
plied with a ‘normal’
CRT monitor (Cathode
Ray Tube).
TV
(Back side view)
Before you connect this
unit to your PC, change
the adjustment of your
PC’s graphic card.
Otherwise the picture
may not appear cor-
rectly on the unit. Turn
on your PC (still with
your old Monitor) and
select under 1360 x
768 for on-screen
PC/HDMI
PC
PC MONITOR
AUDIO
to AUDIO 1
input
VGA lead
(not supplied)
Audio lead (not supplied)
graphic resolution.
Select PC input
Select under 60 Hz for
on-screen refresh rate.
Switch off your PC,
then connect it to this
unit while both items
are still switched off.
Press INPUT SELECT and press C or D to select
PC, then press ENTER. PC appears on the TV
screen.
Note:
•
Digital PC-connection via
HDMI input is not supported.
If you try to connect your PC
digitally anyway, the TV-
operation might freeze. TV
will stop to respond prop-
erly on usercommands.
Countermeasure:
Switch-off your TV and
disconnect from the
220~240V-power-supply.
Disconnect the digital PC-
connection.
Now you may retry operat-
ing your TV.
If a digital PC-connection
does show a picture, proper
working is not guaranteed.
Digital PCconnection is not
granted for this TV.
Note:
• If there is no video signal from the computer when the unit is in PC mode,
‘NO SIGNAL’ will appear on the TV-screen.
• See next page for PC mode menu.
Monitor Display modes
MODE
VGA
VGA
SVGA
XGA
WXGA
WXGA
WXGA
Resolution
640x480
720x400
800x600
1024x768
1280x720
1280x768
1360x768
Refresh rate
60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz
•
(according to Graphic card)
7
50A0201A_p04-09.p65
7
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Connection
Example: Adjust the brightness.
Note: The PC mode
menu settings are not
effective for normal TV-
mode or external input
mode.
1
During PC mode press ANALOG MENU.
The menu appears on the TV-screen.
Press B or A to select
(PICTURE) menu.
2
Press C or D to select BRIGHTNESS, then press ENTER.
Then press B or A to adjust the brightness, then press
ENTER.
PICTURE (PC) menu
BRIGHTNESS
25
MENU: RETURN
EXIT : END
3
Press EXIT to return to the normal screen.
Description of each setting option:
PICTURE menu
BRIGHTNESS and CONTRAST: can be set as you are accustomed to your
TV.
HOR POSITION and VER POSITION: to adjust the horizontal and vertical
placing of the image.
PHASE and CLOCK: eliminates the horizontal (PHASE) and vertical (CLOCK)
interfering lines.
RED/GREEN/BLUE: influences the colour balance.
BACKLIGHT: Press B or A to adjust the level you require.
WXGA INPUT: When you input WXGA, set this option to ‘ON’.
RESET: Press ENTER to reset BRIGHTNESS, CONTRAST, RED, GREEN, BLUE
and BACKLIGHT to the factory preset values.
AUDIO menu
BASS/TREBLE/BALANCE: Tone setting menu.
RESET: Press ENTER to reset BASS, TREBLE and BALANCE to the factory preset
values.
8
50A0201A_p04-09.p65
8
9/12/07, 4:54 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an HDMIor a DVI device to the HDMI input
The HDMI input receives digital audio and uncompressed video from an HDMI
equipped device or uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter lead, it only
transfers the video signal, so it is necessary to use separate analogue leads
(RCA/Phono type) to transfer the audio signals. Select the HDMI input mode
(see page 4).
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of
HDMI Licensing LLC.
TV (Rear view)
IN
This set is classed
as “HD-Ready”.
DVI device
PC/HDMI
HDMI
AUDIO
This means that it
To DVI
is capable of displaying HD
(High Definition) signals when
connected to a suitable HD
source, such as an HD
receiver or DVD player that
has HD capability, via HDMI,
DVI, or Component Video
connections.
output
To PC/HDMI
AUDIO input
HDMI - to - DVI adapter lead
(HDMI type A connector)
or
(not supplied)
To HDMI out
HDMI lead
Note:
(type A connector)
• Some devices may not
operate properly with the
TV.
HDMI device
(not supplied)
Audio lead (not supplied)
Details of HDMI input signals
HDMI compliant (type A connector), HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
2-channel PCM, 32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
HDMI Audio:
Selecting the HDMI audio input source
You must choose the appropriate HDMI audio input setting for each connection,
depending on whether the source is equipped with a DVI or HDMI socket.
1
NICAM
AUTO
25
BASS
TREBLE
BALANCE
HDMI AUDIO
RESET
25
Press ANALOG MENU, the menu will appear on the
0
screen. Press B or A to select
(AUDIO) menu.
HDMI
Press C or D to select HDMI AUDIO, then press ENTER.
Then press B or A to select HDMI or DVI, then press
ENTER.
HDMI
MENU: RETURN
EXIT : END
2
Press EXIT to return to the normal screen.
9
50A0201A_p04-09.p65
9
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue Menu System/On-screen Language Selection
Preparation
Note:
Turn on the unit with
(STANDBY) on the top of the unit or press
• If no buttons are pressed
for more than approx. 60
seconds, the menu disap-
pears automatically.
• If you have already
successfully selected your
preferred language at the
Automatic Tuning stage,
you don’t need to go
(STANDBY) on the remote control.
You can also turn the unit on with
P – on the remote control.
(CHANNEL) C or D on the unit or P + or
To turn off the unit press
(STANDBY) on the unit or press
(STANDBY) on
the remote control - to completely switch it off, disconnect the mains power supply.
Press TV/DVD to select TV mode, or press INPUT SELECT and press C or D to
select ATV, then press ENTER.
Analogue Menu System
Make sure the antenna and power supply are correctly connected according to
the instructions on page 3.
through the procedure
below to select it.
PICTURE AUDIO SETUP
menu menu menu
Indicates more
options - scroll down
1
Press ANALOG MENU, the menu will
appear on the screen.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
Press B or A to view the 3 menu options
Each setting
option
ENGLISH
0
(PICTURE),
(AUDIO),
(SETUP).
VERTICAL POSITION
AUTO 4:3 DEFAULT
16:9
Short guide
EXIT : END
MENU: RETURN
2
Press C or D to select whichever item you require. The function can be activated
by pressing ENTER.
Note:
• Some of the menus have more than one page of items - a scroll bar indicates
that you can scroll down or up to select other items.
3
Press EXIT to return to the normal screen.
On-screen Language Selection
This TV has 13 different languages for menu set up which can be selected
through the On-Screen Display: English, German, French, Spanish, Italian,
Dutch, Portuguese, Swedish, Finnish, Polish, Greek, Russian or Turkish.
1
Press ANALOG MENU, the menu will appear on the screen.
Press B or A to select
(SETUP) menu.
AUTO TUNING
2
MANUAL TUNING
CH ALLOCATION
LANGUAGE
Press C or D to select LANGUAGE, then press ENTER.
Press B or A to select the desired language, then press
ENTER.
ENGLISH
0
VERTICAL POSITION
AUTO 4:3 DEFAULT
16:9
ENGLISH
EXIT : END
MENU: RETURN
3
Press EXIT to return to the normal screen.
10
50A0201A_p10-15.p65
10
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto setup
Your television has an
Automatic Tuning
Switching on
1
System which makes
tuning in your televi-
sion easy. This Auto-
matic Tuning System
scans the entire recep-
tion range in your area
and automatically
stores all available
analog and digital
(DVB) channels of
suitable signal strength
in the correct order e.g.
BBC1 will tune into
channel 1, BBC2 will
tune into channel 2,
etc.
Press
(STANDBY) on the top side of the unit.
The Auto Installation menu will appear first.
AUTO INSTALLATION
LANGUAGE
ENGLISH
UK
Select language
COUNTRY
2
AUTO TUNING
Press C or D to select LANGUAGE, then press ENTER.
Press B or A to select the desired language, then press
ENTER.
ENGLISH
EXIT : END
MENU: RETURN
AUTO INSTALLATION
LANGUAGE
COUNTRY
ENGLISH
UK
Select country
3
AUTO TUNING
Press C or D to select COUNTRY, then press ENTER.
Press B or A to select your country, then press ENTER.
THE AUTOMATIC
TUNING PROCESS
WILL ONLY START
BY ITSELF THE FIRST
TIME YOU SWITCH
THE SET ON.
TO RESTART AUTO
TUNING, SEE PAGE 12
FOR ANALOGUE CHAN-
NELS, AND PAGE 20
FOR DIGITAL
UK
EXIT : END
MENU: RETURN
AUTO INSTALLATION
LANGUAGE
COUNTRY
ENGLISH
UK
Start tuning
4
AUTO TUNING
Press C or D to select AUTO TUNING, then press
ENTER.
AUTO TUNING
1%
CHANNELS.
The confirmation message will be displayed.
EXIT : END
MENU: RETURN
Press ENTER to start automatic tuning.
(ANALOGUE)
Your TV will now tune in all available
channels.
Your TV will tune the analogue channels
first, then tune the digital channels.
Note:
•Please be patient - the Auto Tuning
process can take several minutes
to complete.
(DIGITAL)
When the programme on the screen stops changing and the sound comes on,
the search process is complete.
Note:
• To cancel the Auto Tuning, press ANALOG MENU during the process.
• If the received signal for some channels is too weak, the automatic tuning
system may not pick them up - in this case you may need to use manual tuning
(see page 13).
11
50A0201A_p10-15.p65
11
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto tuning/Changing the order of stored channels
Preparation
If you need to restart
the automatic tuning
process for analogue
channels, use the
Please ensure that all the connections have been made correctly (see page 3).
If you need to restart the automatic tuning process, use the following procedure.
Auto tuning
following procedure.
AUTO TUNING
1
This TV has 18 differ-
ent countries for menu
set up which can be
selected through the
On-Screen Display: UK,
Germany, France,
MANUAL TUNING
CH ALLOCATION
Press ANALOG MENU, the menu will appear on the
LANGUAGE
ENGLISH
VERTICAL POSITION
0
screen.
AUTO 4:3 DEFAULT
16:9
Press B or A to select
(SETUP) menu.
Press C or D to select AUTO TUNING, then press
EXIT : END
MENU: RETURN
ENTER.
Spain, Italy, Belgium,
Netherlands, Switzer-
land, Austria, Portu-
gal, Finland, Poland,
Czech Republic, Hun-
gary, Slovenia, Greece,
Russia, Turkey and
Other.
COUNTRY
START
UK
2
Press C or D to select COUNTRY, then press ENTER.
Press B or A to select your country, then press ENTER.
UK
MENU: RETURN
EXIT : END
3
Press C or D to select START, then press ENTER.
Note:
The automatic tuning will search for available broadcasts and should store the
channels in the correct order. During the search the sound is muted. When all
programmes have been stored, the normal TV screen will appear.
• To restart digital auto
tuning, see page 20.
• When the COUNTRY is set
to UK, the automatic tuning
will search for UHF broad-
casts only.
• When allocating your
channels, we recommend
that you start with CH 1,
continuing with the other
channels afterwards.
Changing the order of stored channels
The Automatic station presetting stores the stations found in a specific order. This
will normally be the correct order (e.g. BBC1 on CH 1 etc.), however if it is
necessary the order can be changed.
AUTO TUNING
1
MANUAL TUNING
CH ALLOCATION
LANGUAGE
Press ANALOG MENU, the menu will appear on the
ENGLISH
VERTICAL POSITION
AUTO 4:3 DEFAULT
0
screen.
16:9
Press B or A to select
(SETUP) menu.
SETUP menu
Press C or D to select CH ALLOCATION, then press ENTER.
EXIT : END
MENU: RETURN
AUTO TUNING
SORT
MANUAL TUNING
CH ALLOCATION
2
ERASE PROGRAM
SKIP
CH LABEL
LANGUAGE
ENGLISH
Press C or D to select desired option, then press
VERTICAL POSITION
0
ENTER.
AUTO 4:3 DEFAULT
16:9
Description about the each setting option:
SORT: Press C or D to select the channel that you want to
move, then press ENTER.
EXIT : END
MENU: RETURN
EXIT : END
MENU: RETURN
Press C or D to select the position that you want to move the channel to, then
press ENTER.
ERASE PROGRAM: Press C or D to select the channel that you want to erase,
then press ENTER.
SKIP: Press C or D to select the channel that you want to skip, then press
ENTER. mark will appear.
CH LABEL: Press C or D to select channel that you want to rename, then press
ENTER. Press C or D to select character, then press B or A. The cursor will
move to the next position. Press ENTER to set the channel label.
3
After setting the each option, press EXIT to return to the normal screen.
12
50A0201A_p10-15.p65
12
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual tuning
Example:
Preset BBC 2 in program position 2.
Usually the Auto Tun-
ing stores all available
stations in the recep-
tion area. If some
stations have poor
reception, they may
not be stored - how-
ever, you can store
these manually if you
wish.
Preparation
Select program position 2.
AUTO TUNING
1
MANUAL TUNING
CH ALLOCATION
LANGUAGE
Press ANALOG MENU, the menu will appear on the
ENGLISH
0
VERTICAL POSITION
AUTO 4:3 DEFAULT
screen.
Press B or A to select
16:9
(SETUP) menu.
AUTO TUNING
2
MANUAL TUNING
CH ALLOCATION
LANGUAGE
Press C or D to select MANUAL TUNING, then press
ENTER.
ENGLISH
0
VERTICAL POSITION
AUTO 4:3 DEFAULT
16:9
SETUP menu
SEARCH
AUTO TUNING
3
FINE
48.25MHz
MANUAL TUNING
CH ALLOCATION
COLOUR SYSTEM
SOUND SYSTEM
AUTO
AUTO
Press C or D to select COLOUR SYSTEM, then press
ENTER.
Press B or A to select AUTO, PAL or SECAM then press
ENTER.
LANGUAGE
ENGLISH
VERTICAL POSITION
0
AUTO 4:3 DEFAULT
16:9
BBC1
48.25 MHz
AUTO
EXIT : END
MENU: RETURN
EXIT : END
MENU: RETURN
Please note that PAL should be selected for use in UK.
SEARCH
FINE
4
48.25MHz
COLOUR SYSTEM
SOUND SYSTEM
AUTO
AUTO
Press C or D to select SOUND SYSTEM, then press
ENTER.
Press B or A to select AUTO, B/G, I, D/K or L/L’, then
press ENTER.
BBC1
48.25 MHz
AUTO
5
Press C or D to select SEARCH, then press ENTER.
Press B or A. The auto search begins. It will stop at each
station that has a good enough reception. Press B or A
again until you receive a clear BBC2 picture, then press
ENTER.
• If you want to stop the search manually, press ENTER
while the frequencies is countinig up.
The auto search should find the best reception
automatically, so fine tuning is not normally neces-
SEARCH
6
FINE
125.65 MHz
sary. However if you want to you can fine tune the
reception manually…
COLOUR SYSTEM
SOUND SYSTEM
AUTO
AUTO
Press C or D to select FINE, then press ENTER.
Press B or A to tune the receivable frequencies depend-
ing on TV norm, installation site, and range, then press
ENTER.
BBC2
125.65 MHz
EXIT : END
MENU: RETURN
7
Repeat steps above to preset other TV stations.
8
Press EXIT to return to the normal screen.
13
50A0201A_p10-15.p65
13
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic TV functions
Note:
Channel Selection
• If the built-in tuner does not
receive any signal (e.g. if
no aerial is connected or if
the broadcast transmission
stops) during TV operation,
this unit will switch to
With the 10 Number Buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2. The station stored in the CH2
position will appear.
• No. 29: Press 2 and within 2 seconds, press 9. The station stored in the
CH29 position will appear.
standby after approx. 15
minutes.
With the P + or P – buttons.
Press P + or P – to change the program number up or down. Each change will
take approx. 2 seconds.
• In DTV mode
Min. numbered Digital CH
Max. numbered Digital CH
• Other than DTV mode
Min. numbered Analogue CH
Max. numbered Analogue CH
DVD
PC
HDMI
COMPONENT
AV2
AV1
With the CH LIST button.
Press CH LIST to display channel list. Press C or D to select the desired pro-
gram, then press CH LIST to display the selected program.
If the auto search only stored 5 stations, only these 5 will appear. Concealed
channels will not appear (see page 12).
Quick View
button allows you to go back to the last selected channel or input source.
Volume adjusting
Press
+ or
– to adjust the volume. The volume level indicator disappears
after 4 seconds.
MUTE
Press
. The sound will be cut off. MUTE will display on the screen for approx.
4 seconds. The muting can be released by pressing
again or
+ or
–.
DISPLAY
S T E R E O
1
B B C 1
In the analogue TV mode: Press . Channel
number and picture size setting will appear
for approx. 4 seconds.
In the digital TV mode: Press . The program
information will appear (see ‘Channel
banner’ on page 27).
AV C O L O U R
A U T O
A U T O
SLEEP TIMER
Press . SLEEP and the number of minutes until
the set is due to shut - off will appear. Each
S L E E P
1 2 0
time you press
the SLEEP time will decrease
in 10 minute intervals.
When the displayed time runs out, the unit will
switch to standby. The display will disappear
after approx. 4 seconds.
To cancel the sleep timer:
Press
repeatedly until ‘0’ appears.
14
50A0201A_p10-15.p65
14
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext is sent page by page. This unit is able to automatically store up to 256 pages. Storage lasts until all pages
have been received. The pages can only be accessed when they have been stored. This can take a moment.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special directory.
On the lower part of the screen there are four different coloured fields (red, green, yellow and blue). These fields lead
directly to the pages shown within. The Four coloured buttons on the remote control correspond to the coloured
fields. Press the appropriate coloured button in order to go to the page represented by that particular colour field.
Switch on / off Teletext
TELETEXT
Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press
Press
. You will now see a teletext page (as long as it is available).
again to display the Teletext and normal TV picture at the same time on the screen.
Each time you press
, the screen switches as shown right.
TELETEXT
Note:
You cannot select any other channels as long as teletext is switched on. Switch teletext off when you want to switch
over to another channel.
Select Page
Press P + or P – until the desired page appears. Or ... enter the requested page number by using the 10 Number
Buttons.
And if you mistype something, just enter the complete 3-digit wrong page number then enter the desired number
again. Or ... press one of the coloured teletext buttons so that a page from Fastext/TOPtext is shown.
Hold Pages
Some pages are divided up into subpages by the channel.
Subpages are automatically shown in turn, as they are transmitted. In order to hold the page, press
again in order to display the next subpage.
. Press
Directly Select Subpages
128 128 CEEFAX 21.07.03 15:01:38
1/2
You can directly select the subpages if required.
Example:
Page 128 from Teletext may comprise 2 subpages. In the right upper corner you will, for example, see 1/2. That
means that page one of 2 subpages is being shown at the moment.
Press
in order to select subpage 2. Four dashes (– – – –) are shown. Enter ‘0 0 0 2’. It can take a minute
before subpage 0002 appears.
Press
again in order to switch off the subpage feature. You can only select other teletext pages when the
subpage feature is switched off.
Enlargement
In order to enlarge the display, press
.
Either the upper or lower half of the screen is enlarged.
Each time you press
you switch between the display of the upper or lower half of the screen or the full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed answers.
Press
in order to show the answers.
Index page (Page 100)
Press ENTER in order to show page 100 (this is normally the Index page).
15
50A0201A_p10-15.p65
15
9/12/07, 4:55 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the NICAM stereo sound
NICAM stereo sound reception:
The built-in tuner can
receive and distinguish
1
NICAM Stereo
broadcasts
automatically,
Press ANALOG MENU, the menu will appear on the
screen.
NICAM
AUTO
25
BASS
TREBLE
BALANCE
HDMI AUDIO
RESET
25
Press B or A to select
(AUDIO) menu.
0
provided the NICAM
setting in the menu is
set to ‘AUTO’.
HDMI
Press C or D to select NICAM, then press ENTER.
Press B or A to select AUTO or OFF.
Select OFF if you want to revert to standard mono FM
audio reception.
AUTO
MENU: RETURN
EXIT : END
Note:
• Sometimes if reception is
poor, the NICAM stereo
sound may not be received
correctly. In case of 2
2
Press EXIT to return to the normal screen.
channel sound reception,
you can select the desired
sound with AUDIO.
When NICAM reception is available, one of the
following indications will be displayed.
AUDIO menu
‘NICAM ST’ illuminates for approx. 4 seconds
when a NICAM STEREO broadcast signal is
received.
NICAM
AUTO
25
BASS
TREBLE
BALANCE
HDMI AUDIO
RESET
25
0
‘NICAM M1’ illuminates for approx. 4 seconds
when a NICAM MONO A broadcast signal is
received.
HDMI
EXIT : END
MENU: RETURN
‘NICAM M1/M2’ illuminates for approx. 4
N I C A M M 1
/
M 2
seconds when a NICAM MONO A and
MONO B broadcast signal is received.
This will be displayed for approx. 4 seconds
when ‘NICAM OFF’ is selected in the menu
screen.
Stereo reception
‘STEREO’ illuminates for approx. 4 seconds
when a STEREO broadcast signal is received.
Adjusting the Nicam stereo sound
Pressing AUDIO alternates between the two different audio channels (when
applicable).
NICAM 2-channel sound reception
S O U N D 1 / 2
S O U N D 1 / 2
16
50A0201A_p16-19.p65
16
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture format
Pressing PICTURE SIZE repeatedly scrolls through the following options.
Note: When the
PICTURE SIZE is set to
AUTO, the aspect ratio
will automatically
change according to
the Wide Screen
Manual format setting
4:3
It shows a 4:3 picture in original size with black bands
on left and right side.
Switching (WSS)
signal, if it is available.
This may be either
transmitted by the
broadcasting TV
FULL SCREEN:
Stretches the left and right hand sides of a 4:3
picture horizontally to fill the screen, while
leaving the centre of the picture unstretched.
channel, or via a
(FULL SCREEN)
Note:
recording from a VCR
etc. Any WSS signal
received will only be
effective in the AUTO
mode - however, some
DVD players / Digital
Decoders etc. will
automatically switch
the aspect ratio via the
SCART input (Pin 8
switching), even if
AUTO is not selected.
In any case if you
• In this mode the picture is geometrically distorted on the left and the right
sides of the screen.
16:9
This mode is used with 16:9 signals from the
Digital tuner, a DVD player or other external
source. This uniformly stretches a 4:3 image
horizontally to fill the screen (For example, a
16:9 image is often stored ‘anamorphically’
on a DVD, where the 16:9 image is stored as a horizontally compressed 4:3
image - this mode restores the image to its correct 16:9 proportions).
(16:9)
want to change to a
different aspect ratio
to the one selected
automatically, you can
change it by pressing
PICTURE SIZE.
CINEMA:
This mode is used to zoom-in on (expand) 4:3
‘letterbox’ format pictures (with black bars at
the top and bottom) so that they fill more of
(CINEMA)
the screen.
Note:
• In the CINEMA mode, part of the picture may be slightly cut off due to the
expansion. However, it is possible to scroll the picture up or down to view the
top or bottom part of the picture (see page 18).
• If you operate OSD functions such as the EPG or Digital Menu whilst in the
CINEMA mode, the screen will temporarily change to the FULL SCREEN mode.
In PC mode, the PIC-
TURE SIZE feature is
available only for 16:9
or 4:3 format. (In
“WXGA INPUT” mode,
the PICTURE SIZE
feature is not avail-
14:9:
able.)
This enlarges a 4:3 picture to the 14:9 format.
In HDMI or COMPO-
NENT mode of scan-
ning rate: 720p and
1080i, the PICTURE
SIZE feature is avail-
able only for AUTO
and CINEMA format.
(14:9)
AUTO:
Automatically selects the aspect ratio (see note to the right).
17
50A0201A_p16-19.p65
17
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful functions
Icon
Selected Items
Setup hint
Bright and dynamic picture (factory-set)
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences
PICTURE
PREFERENCE
SPORTS
STANDARD
MOVIE
MEMORY
BRIGHTNESS / CONTRAST /
COLOUR / TINT (NTSC) /
SHARPNESS
You can adjust the picture to your preference.
PLEASE NOTE: The “TINT(NTSC)” function can only be selected in an NTSC
3.58MHz or NTSC 4.43MHz signal is input through one of the AV sockets,
and NTSC or AUTO has been selected for the AV COLOUR option.
COLOUR TEMPERATURE
Bluish (COOL) / Neutral (MEDIUM) / Reddish (WARM)
BLUE BACK
BACKLIGHT
RESET
ON / OFF
You can set the TV to automatically change to a blue screen and mute the
sound if the signal is weak or absent.
You can use the Back light feature to adjust the screen brightness for
improved picture clarity.
Select “RESET” to reset PICTURE PREFERENCE, BRIGHTNESS, CONTRAST,
COLOUR, TINT (NTSC) / SHARPNESS, COLOUR TEMPERATURE and
BACKLIGHT to the factory preset values.
NICAM
See page 16.
BASS / TREBLE / BALANCE
HDMI AUDIO
You can adjust the sound quality to your preference.
See page 9.
RESET
Select “RESET” to reset BASS, TREBLE and BALANCE to the factory preset
values.
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
LANGUAGE
See page 12.
See page 13.
See page 12.
See page 10.
VERTICAL POSITION
When the CINEMA mode is selected (see page 17), you can adjust the
vertical picture position. Press B or A to adjust the vertical position of the
picture by up to +10 and downwards by up to -10.
AUTO 4:3
DEFAULT*1
4:3 / 16:9
This option selects the default way that a 4:3 signal is shown - either as
normal “4:3” or expanded in the “16:9” mode, according to your
preferences.
AV1 OUTPUT
AV COLOUR*2
TV/MONITOR See page 6.
The AV Colour setting only applies when viewing devices connected to the
AV inputs.
REC SCREEN
STATUS
ON / OFF
This function is used in conjunction with the Timer function that is included
as STATUS part of the Digital EPG. It determines whether the TV screen
switches on or not when a programmed Timer setting begins - see page 31
for further details.
Note:
*1
AUTO 4:3 DEFAULT is available only for AUTO picture size setting.
*1
*2
In COMPONENT mode, AUTO 4:3 DEFAULT is available only for 480i/576i mode.
PAL is the colour system used in Germany. NTSC 3.58 is used in the USA, PAL 60 used in Germany handled
video recorders, which play NTSC video tape recording.
18
50A0201A_p16-19.p65
18
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to using the Digital Menu System
Preparation
When the set is in the
Press TV/DVD to select TV mode and press TV/DVB-T to select the digital TV
mode.
or
digital mode, you can
access the main menu
by pressing DIGITAL
MENU on the remote
control.
Press INPUT SELECT and press C or D to select DTV, then press ENTER.
This main menu
contains several
options,
Installation System Configuration
1
Channel Organizer
Language Setup
Technical Information
Common Interface
Press DIGITAL MENU to
display the Main menu.
Press B or A to select desired
options.
- Language Setup
- Channel Organizer
- Installation
- System Configuration
- Technical Information
- Common Interface
A
C
B
(Example: selecting the
Language Setup option.)
Guide of the
available buttons
The main menu is the
gateway for all the
other ‘sub’ menus.
You can navigate
between the different
options in the main
menu by
2
Language Setup
Menu Language
English
Press ENTER.
Pref. Audio Language
English
English
English
Pref. Subtitle Language
Pref. Digital Service Language
The selected menu will appear.
pressing B or A.
Enter
Exit
Navigate
The DIGITAL MENU key
will also function like
an ‘EXIT’ key, i.e.
when any menu is
active, pressing the
DIGITAL MENU key will
return to the previous
stage.
Some of the options have a sub menu.
Press C or D to select desired sub menu, then
press ENTER.
Main menu
Installation
A
C
B
Auto Scan
Manual Scan
Carrier Setup
(Example: sub menu in the Installation option.)
3
When you have finished making adjustments, press EXIT to return to the normal
screen.
Note:
• In analogue TV mode, DIGITAL MENU will not work. Please press TV/DVB-T
to select digital TV mode to display the digital menu.
However, it is possible to use the ANALOG MENU in the digital TV mode.
The analogue menu includes some general settings for this TV that apply to
both modes, and it will be displayed over the digital TV screen.
19
50A0201A_p16-19.p65
19
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Setup/Auto Scan
Language Setup
DIGITAL MENU allows
you to make your own
choice of language
which you wish to
1
Main menu
Language Setup
Press DIGITAL MENU, the menu will appear on
the screen.
have. From the list of
languages you can
select the preferred,
• Menu Language
• Pref. Audio Language
• Pref. Subtitle
Language
• Pref. Digital Service
Language
A C
B
Press B or A to select Language Setup option,
then press ENTER.
2
Language Setup
Language Setup menu will appear.
Press C or D to select the item you want to
change.
Menu Language
English
English
English
English
Pref. Audio Language
Pref. Subtitle Language
Pref. Digital Service Language
Menu languages
supported are English,
French, German, Italian,
Spanish, Russian,
Press B or A to select desired language.
Enter
Exit
Navigate
3
Portuguese, Dutch,
Polish, Swedish,
When all changes are decided, press EXIT to return to the normal screen.
Turkish, Finnish and
Greek. (Welsh and
Gaelic are available
only for Digital Service
Language.)
Auto Scan
Preparation
• Please ensure that all the connections have been made correctly (see page 3).
Note:
• All the channels will be
deleted before the scan-
ning process begins.
• You can cancel the scan
process at any time by
pressing EXIT. The carriers
and the services stored
before EXIT is pressed will
be stored.
1
Main menu
Installation
Press DIGITAL MENU, the menu will appear on
the screen.
A
C
B
Auto Scan
Press B or A to select Installation option.
Press C or D to select ‘Auto Scan’ from the sub
menu tab, then press ENTER.
Manual Scan
Carrier Setup
2
The confirmation banner will be displayed.
Press B or A to select ‘Yes’ or ‘No’, then press ENTER.
3
The Auto Scan process will now begin.
The scanning process will be displayed in the
progress bar.
When the search has been completed ’Scan
completed’ message will be displayed.
And the Auto Scan menu will exit automatically.
20
50A0201A_p20-23.p65
20
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Scan/Carrier Setup
Manual Scan
With the Manual Scan
option, you can tune
one carrier at a time,
by entering the carrier
parameters manually.
1
Main menu
Installation
Press DIGITAL MENU, the menu will appear on the
screen.
A
C
B
Press B or A to select Installation option.
Press C or D to select ‘Manual Scan’ from the sub
Auto Scan
Manual Scan
Carrier Setup
The Carrier setup option
menu lists all the carri-
ers (multiplexes) that
are currently available
and allows you to re-
name, Delete or Rescan
carriers individually.
menu tab, then press ENTER.
Manual Scan
Channel list
2
Ch-21
Frequency (kHz)
474000
You can choose the carrier number from the Channel
list by using B or A and the corresponding frequency
set for the carrier will be set for tuning.
0..9
Enter
Exit
Navigate
WE STRONGLY SUGGEST
YOU NEVER DELETE ANY
OF THE CARRIER INFOR-
MATION UNLESS IN-
Otherwise you can also directly enter the frequency value to start the tuning.
STRUCTED TO DO SO.
3
After setting the carrier, press ENTER to start the scanning. During the scan process, the
list of services (TV/Radio) collected for the carrier will be listed.
Note:
On completion, ‘Scan completed’ message will be shown.
• If on the ‘AUTO INSTALLA-
TION (COUNTRY)’ screen
‘FINLAND’ is selected,
“Frequency (kHz)” cannot
be used.
4
Then the confirmation banner will be displayed.
Press B or A to select ‘Yes’ or ‘No’, then press ENTER.
5
Press EXIT to return to the normal screen.
Carrier Setup
Main menu
Installation
A
C
1
B
Auto Scan
Press DIGITAL MENU, the menu will appear on the screen.
Manual Scan
Carrier Setup
Press B or A to select Installation option.
Press C or D to select ‘Carrier Setup’ from the sub menu tab,
then press ENTER.
2
All the carriers are listed with their frequency and service information - the user can scroll
through the carrier list and select each one individually to Rename, Delete or Rescan.
3
Rename:
Select carrier, then press Red button. The alphanumeric keypad will appear. You can
rename a service as per your preference.
Delete:
Select carrier, then press Green button. The check mark (
) will be displayed for
selected carrier. Then press ENTER. The confirmation banner will be displayed.
Press B or A to select ‘Yes’ or ‘No’, then press ENTER. If the option ‘Yes’ is selected then
all the marked carriers will be deleted from the list.
Rescan:
Rescan allows to tune the already tuned carrier, to collect any new programmes that are
currently available in the stream. Press Blue button, to rescan the current selected carrier.
21
50A0201A_p20-23.p65
21
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Organizer
The Channel Organizer
1
feature provides
options to organise the
channels. The
Main menu
Channel Organizer
Press DIGITAL MENU, the menu will appear on
the screen.
A
C
B
Press B or A to select Channel Organizer option,
then press ENTER.
following options are
supported: Favourite,
Lock, Skip, Go To,
Delete, Rename, Move,
Move to, View.
2
Channel Organizer
S.No Service Name
TV
Fav Lock Skip Del Move
The Channel Organizer menu will appear. The
available programmes will be listed, depending on
the current mode. The selected programme will be
highlighted.
Note:
001 BBC ONE
002 BBC TWO
003 ITV1
004 Channel4
005 Five
• While in TV mode, only TV
programmes will be
displayed and only radio
programmes will be
displayed while in radio
mode.
1. Fav
3. Skip
5. Delete
7. Move
Enter . View
2. Lock
4. Go To
6. Rename
To toggle within the service list, press C or D.
0..9
D.Menu
Enter
Exit
TV/Radio
Navigate
• Channel / Service names
can only be displayed up
to 10 characters - if the
name is longer than this, it
will be abbreviated.
• If you select ‘UK’ on the
‘AUTO INSTALLATION (see
page 11)’ or the ‘AUTO
TUNING (see page 12)’,
‘Move to‘ cannot be used.
3
By pressing the corresponding Number Button (1-7) or the ENTER key, you
can activate the following functions from this menu for each channel: Favourite,
Lock, Skip, Go To, Delete, Rename, Move and View. (You can de-activate each
of these functions by pressing the same number again.)
Indications:
S.No Service Name
030 CBBC
Fav Lock Skip Del Move
1
Service Service Pay
Delete
mark
number name
channel
Favourite Skipped
group
service
Locked
service
Move
mark
22
50A0201A_p20-23.p65
22
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel Organizer
None Assign services to four different favourite groups.
1
2
3
Press C/D to select the desired service.
Fav 1
Fav 2
Fav 3
Fav 4
Press 1 on the remote control. A selection box displays.
Fav *1
Press C/D to register the selected service to any of the four favourite groups (None, Fav1 ... Fav4)
and then press ENTER. An icon displays indicating the favourite status.
Press DIGITAL MENU.
4
5
Now you can easily select your favourite service from the Channel List (See page 26).
When the service is locked, you must enter your PIN whenever you tune to the service.
1
2
Press C/D to select the desired service.
Press 2 on the remote control. If you already set the PIN, enter it here. If not, enter the factory
preset PIN “0000”.
Lock
An icon displays indicating the service is locked.
• Pressing 2 will turn the lock icon on and off. (PIN entry is required.)
Press DIGITAL MENU.
3
Services that are set to skip will not be picked up when pressing P +/–.
1
2
Press C/D to select the desired service.
Press 3 on the remote control. An icon displays indicating the service to be skipped.
• Pressing 3 will turn the skip icon on and off.
Skip
3
Press DIGITAL MENU.
• To view services that are set to be skipped, use 0-9 or select from the Channel List.
Use this function to jump to the specific service in one step. This is useful when there are many
services displayed on screen to scroll through.
Go To
1
Press 4 on the remote control. Now you can change the service number on the left side of the
screen.
2
Enter the number using 0-9, and then press ENTER. The highlight moves to the selected
service.
Delete the selected service(s) from the memory.
1
2
Press C/D to select the desired service.
Press 5 on the remote control. An icon displays indicating the service to be deleted.
• Pressing 5 will turn the delete icon on and off.
Delete
Rename
Move
3
4
Press DIGITAL MENU. A confirmation message displays.
Press B/A to select “Yes”, and then press ENTER.
Change individual service names.
1
2
3
4
5
Press C/D to select the desired service.
Press 6 on the remote control. A character set screen displays.
Enter new name for the service.
Press DIGITAL MENU. A confirmation message displays.
Press B/A to select “Yes”, and then press ENTER.
Sort the order of the selected service by moving the service position.
1
2
Press C/D to select the desired service.
Press 7 on the remote control. An icon displays indicating the service to be moved.
• Pressing 7 will turn the move icon on and off.
3
Move the selected service to the desired position using C/D, and then press ENTER to register
the change.
Sort the order of the selected service by modifying the service number.
1
2
Press C/D to select the desired service.
Move To *2
Press 8 on the remote control. Now you can change the service number on the left side of the
screen.
3
Enter the number using 0-9, and then press ENTER. The service moves to the new position.
Change to the service shown in the picture window.
1
2
3
Press C/D to select the desired service.
Press ENTER on the remote control. The image shown in the picture window changes.
Press EXIT to exit the Channel Organizer screen to view the image in full screen
View
Note:
*1 You cannot register the same service to two different favourite groups.
*2 If on the “FIRST INSTALLATION (COUNTRY)” screen “UK” is selected, “Move To” cannot be used in U.K.
23
50A0201A_p20-23.p65
23
9/12/07, 4:56 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Setup/Password Setup (Parental lock)
Display Setup
Display Setup feature
allows you to change
Main menu
System Configuration
the Display Setup
settings as per your
preference. In this
menu the following
options are
1
A
C
B
Press DIGITAL MENU, the menu will appear on the
Display Setup
screen. Press B or A to select System Configuration option.
Password Setup
Press C or D to select ‘Display Setup’ from sub menu tab, then
press ENTER.
available.
2
Password Setup
feature allows you to
have a parental
Display Setup menu will appear.
Press C or D to select the item you want to change (see the left note for details of each
setting). Then you can change each setting by pressing B or A.
control of the service
viewing as per your
preference.
Banner
timeout
Banner
position
Display
Transparency
1 Sec, 2 Secs…. Select how long the service banner information appears
7 Secs
Top
Bottom
None
10%, 20% … 50%
on screen.
Select whether the service banner information appears
on top or bottom of the screen.
Select the desired level of On-Screen Display transparency.
Once a service is
protected with a
password, it cannot
be viewed unless the
correct password is
provided.
3
After all the changes are made, press EXIT to return to the normal screen.
Note:
Password Setup (Parental lock)
• There are 15 age-based
ratings, ranging from ‘4’
(years old) to ‘18’ (years
old) and ‘None’. Eg. If the
Parental Lock is set to ‘8’
(years old), only the
PLEASE NOTE THAT AT THE TIME OF WRITING, THIS AGE RESTRICTION SERVICE HAS
NOT YET BEEN IMPLEMENTED FOR DVB SERVICES IN THE UK
1
Press DIGITAL MENU, the menu will appear on the screen. Press B or A to select
System Configuration option.
services which have the
parental rating of ‘8’
Press C or D to select ‘Password Setup’ from sub menu tab, then press ENTER.
(years old) or under will be
viewable without entering
the Password.
• You will be prompted to
enter the password, when
you set new parental
rating. You can set the new
parental rating only when
you enter the password
correctly, otherwise the old
parental code will be
retained.
2
‘Enter Password’ will appear. Press ‘0 0 0 0’ using the Number Buttons. (This is the
default password.)
3
Press C or D to select ‘Parental Lock’, then press B or A to select desired parental rating
(see note). Then press EXIT to return to the normal screen.
4
You can also change the password using the next option.
Press C or D to select ‘Change password’.
Then enter your chosen new password (be sure to remember this password). After you
have entered the new password for the first time, you need to enter the same password
again for confirmation. The Information banner will then appear.
Press EXIT to return to the normal screen.
While toggling between channels, if a service which has a parental rating is selected
then you will be asked to enter the correct password to view that channel. If the channel
you are currently watching supports a parental rating then the rating will also be
displayed in the Channel banner menu (see page 27).
24
50A0201A_p24-25.p65
24
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Version/Software Upgrade/Common Interface
Version
From the Technical
Information option
in the menu you
can access the
Version and
Main menu
Technical Information
1
A
C
B
Press DIGITAL MENU, the menu will appear on
the screen.
Version
Software upgrade
Press B or A to select Technical Information option.
Software upgrade
Press C or D to select ‘Version’ from the sub menu tab, then press ENTER.
menus.
Version information banner will appear.
Software Upgrade
allows you to
Software Upgrade
Main menu
Technical Information
download the latest
software available
on the Engineering
channel which is
carried on Multiplex
1 (BBC).
1
Turn to a BBC channel first!
A
C
B
Select Technical Information option (the 5th icon
along at the top of the menu).
Version
Software upgrade
Select ‘Software upgrade’ from sub menu tab by pressing C or D. Then press
ENTER.
2
If a software upgrade is available from an Over-Air-Download (OAD) then the
message ‘S/W available, do you want to download?’ will be displayed - you
can then select ‘Yes’ or ‘No’ by pressing B or A, then press ENTER.
Note:
• During the Software
Updating process, do not
turn off the unit. At this time
you cannot use any of the
buttons, apart from
3
If you select the option ‘Yes’ then the Software Upgrade process will be initiated.
It will take about 20 minutes and after this process is complete, the TV will be
rebooted automatically.
(STANDBY).
• After the Software
Updating process, the
Digital Menu memory
settings will be lost, so it is
necessary to go through
the setting up procedures
again.
If you select the option ‘No’ you can continue to watch TV programmes as
before.
Common Interface
Main menu
Common Interface
1
A
C
B
Press DIGITAL MENU, the menu will appear on
the screen. Press B or A to select Common Interface option, then press ENTER.
2
The CAM module name will be displayed. You have to press ENTER to view
further information.
3
In the CI Menu, CAM specific information such as Module information, Smart
card information Language and Software Download are shown.
Press C or D to select information, then press ENTER to see detail.
4
Press EXIT to return to the normal screen.
Note:
• If you remove the CAM module in the digital TV mode then ‘CAM module has
been removed’ will be shown on the screen.
If you enter into the Common Interface menu when the CAM is not inserted
then ‘No CAM Found‘ will be displayed.
25
50A0201A_p24-25.p65
25
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel list
The Channel list menu
can also be referred to
as the Quick Select
Menu, as it allows you
to view the list of
1
Press CH LIST to display the Channel list menu.
Channel group
Zoom window
Channel list
TV
services available in
the database with a
single click, instead of
navigating through
various menus.
Channel group
All
S.No
Services
001
002
003
004
005
006
BBC ONE
BBC TWO
ITV1
Channel4
Five
Carrier
DVB-T 16QAM
List of the
services
Freq
177500 kHz
Tuning
parameters
ITV2
Enter
Exit
TV/Radio
Navigate
Menu description
In the case of TV channels, a small picture of the selected service will be shown
in the preview window. For Radio channels, a still picture will be displayed in
the Preview window. In the case of a service which has Teletext data only,
Video’ or No Audio’ will be displayed in the Preview window. The tuning
‘No
‘
parameters are displayed in the lower right part of the Menu screen.
2
Select the Channel group (Favourite):
Press B or A to select between Channel groups - you can toggle through All
(complete channel list)/Fav1/Fav2/Fav3/Fav4 (see ‘Fav’ on page 23 for details on
setting Favourites).
Select the Services:
List of the services present under the selected Channel group will be displayed in
the left side of the menu.
Press C or D to toggle within the service list, then press ENTER.
Toggle between the list of TV and Radio services:
The TV/RADIO key is used to toggle between the TV and Radio mode. If you
press CH LIST when you are in Radio mode then the channel list menu will
display the list of Radio services. If you wish to view the list of TV services
without exiting the current menu, TV/RADIO key should be pressed once.
Note:
• If any Channel group doesn’t have any service at the time,
‘No services’ and
‘
No Information will be displayed in the menu.
’
• Channel / Service names can only be displayed up to about 12 characters - if
the name is longer than this, it will be abbreviated.
26
50A0201A_p26-31.p65
26
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel banner
Preparation
The Channel banner
should be displayed
for every channel
change and also
through direct numeric
key input.
When you change from one channel to another, the Channel banner will be
displayed for the selected service. In the channel banner menu, information such
as current date & time, channel name, etc. will be displayed.
1
While watching the service, press to display the Channel banner at any time. It
will disappear after the Banner timeout value (this can be adjusted to your
The Channel banner
allows you to have a
brief gist of the service
details while toggling
itself. The menu
preferred value, see page 24).
DVB Text available
DVB Subtitle available
Pay TV
Audio mode
Service name
Service No.
Lock status
Channel group
(Favourite)
comprises of all the
necessary details
about that service.
Duration
graph
Time and
date
Genre
Programme name
Starting time/Ending time
of current programme
Parental rating
Note:
• Subtitles are displayed on
the channel banner. Some
broadcasts may not
provide this service.
If the selected channel supports special features like, DVB Text, DVB Subtitle,
Audio mode (Left, Right, Stereo), parental rating, etc. this information will be
shown in the channel banner as above.
2
Basic Service Information
DVB-T 16QAM
Service Name
Signal Quality
Signal Strength
001 BBC ONE
Press again to display the Basic Service
information. You can verify the signal strength
and quality of the selected service here.
56%
50%
Enter
Exit
3
To remove the Channel banner immediately, press again.
27
50A0201A_p26-31.p65
27
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi audio/DVB-Subtitle
PLEASE NOTE THAT AT THE TIME OF WRITING, THE MULTI-LANGUAGE
OPTIONS FOR DVB AUDIO AND SUBTITLES HAVE NOT YET BEEN
IMPLEMENTED.
You can select your
preferred Audio mode
and DVB (digital TV)
subtitle Language.
The Multi audio menu
will display the Audio
mode and Language
options available with
the current broadcast.
Multi audio
Multi audio
Audio mode
Stereo
1
No.
001
Language Code
ENG
Press AUDIO to display the Multi audio menu.
The Audio mode and Language code will be
displayed if available.
DVB-Subtitle is a
feature supported in
DVB (Digital Video
Broadcasting)
Enter
Exit
Navigate
applications in which
the service shown can
be accompanied by a
text display on the
screen in parallel with
the corresponding
audio service. The
DVB-Subtitle feature
can be enabled or
disabled at anytime.
2
Multi audio
Audio mode
To select Audio mode, press B or A. In general
the below audio modes will be supported in a
service.
L+R
No.
001
Language Code
ENG
Left, Right, L + R and Stereo.
To select a Language code, press C or D to
select code within Language Code List.
Enter
Exit
Navigate
3
Press EXIT. Your selected audio preferences will be saved.
DVB-Subtitle
1
Subtitle
Press
to display the DVB-Subtitle menu when
Language
Off
subtitles are available.
2
Subtitle
Press
repeatedly to select your desired subtitle
Language
English
language from the available languages.
3
To turn off the DVB-Subtitle, press
Subtitle menu.
repeatedly until ‘Off’ appears in the
28
50A0201A_p26-31.p65
28
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
DVB Text
1
Select a channel which has DVB Text - i.e. One which has the Teletext icon (
is displayed in the Channel banner (see page 27).
)
2
DATA
Press
- the DVB Text page for that channel
should be displayed.
Each time you press
shown below.
, the screen switches as
DATA
3
There are various links in the DVB Text screen.
You can navigate the pages by pressing the
buttons on the remote control as follows;
Ticket guide
Travel
1
2
Movie
3
Music
U.K
France
Germany
Italy
• If there are numbered links, press the
corresponding one of the Number
Buttons.
Switzerland
Other
Exit
Down
Select
Up
• If there are coloured links, press the
corresponding one of the four coloured
buttons (red / green / yellow / blue).
• If there is a movable cursor, press C/D/B/
A to select your desired link, then press
ENTER.
4
To see other DVB Text channels, press
another channel which has a DVB Text service.
to exit current service, then select
Note:
• If you enter the EPG or Digital Menu whilst using some DVB Text services, it
may not return to the Teletext screen you were viewing before - in this case just
press the
button again and re-select the required page.
29
50A0201A_p26-31.p65
29
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
EPG (Electronic Program Guide)
The Guide menu shows
1
the available
Press GUIDE to display the Guide menu.
programme listings for
the next 8 days only,
including today. How-
ever, the guide menu
will show “No Event
Name” for
programmes which are
more than 8 days
ahead, or for
Guide
16:50 Sun 20/08/2007
TV
001 BBC ONE
Sun 20/08/2007
Programme information
(episode details, etc.)
16:30-17:00 The Wild Thornberrys CBBC
The Wild Thornberrys Bogged Down:
Nigel and Eliza are on their way to film a
rare fish. Nigel suggests a shortout
through a bog, but Ellza is reluctant.Th...
Channels
16:30
17:00
17:30
The Wild T... The Blue... No Event Na...
Ready Steady Co... The Weakest Link
Little Be... No Event Name
No Event Name
BBC ONE
BBC TWO
ITV1
Channel4
Five
Service list
Events list
No Event Name
programmes within
the 8 days when no
programme informa-
tion is available.
Page -
Page +
Prev.Day
Next Day
Enter
Exit
TV/Radio
Navigate
View Info
Highlighted programme
Service list :
Lists all the services that are currently available.
As you scroll through the service list by pressing C or D, the Event list will be
refreshed accordingly, and you will see the programme information for the
currently highlighted programme.
To scroll through the service list page by page, press Red or Green Key.
Events list :
List the events in a grid of rows and columns.
Each row shows the list of events that are available, for the corresponding
service in the service list. Within each row, you can press B or A to navigate
through the rest of the events.
You can easily move to the Previous day or Next day in the Events List by
pressing Yellow or Blue key (the date of the programme information you are
currently viewing is shown in the top right hand corner).
The full Event name along with the duration of the event will be displayed in the
bar above. Event title will be displayed only if available otherwise ‘No
Description’ message will be displayed.
2
From within the Guide menu, you can open the
Description menu for the currently highlighted
programme by pressing .
The Guide/Description menu shows the
extended event description of an event. You can
scroll and view the complete event description of
the event using C or D.
To return to the Guide menu, press .
To clear the menu screen, press EXIT.
30
50A0201A_p26-31.p65
30
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
EPG Timer
Guide
16:50 Sun 20/08/2007
TV
You can choose
whether or not the
screen switches on
when the event timer
begins - please see
page 18 (Rec screen
status (LCD Power on/
off)). This is so that if
you are using the
timer to make a re-
cording to your VCR or
other device, the TV
screen will not switch
on unless you want it
to.
001 BBC ONE
Sun 20/08/2007
1
16:30-17:00 The Wild Thornberrys CBBC
The Wild Thornberrys Bogged Down:
Nigel and Eliza are on their way to film a
rare fish. Nigel suggests a shortout
through a bog, but Ellza is reluctant.Th...
Press GUIDE to display the Guide menu. Then
press C/D/B/A to highlight the programme you
want to set as an event timer, then press ENTER.
Channels
16:30
17:00
17:30
BBC ONE
BBC TWO
ITV1
Channel4
Five
The Wild T... The Blue... No Event Na...
Ready Steady Co... The Weakest Link
Little Be... No Event Name
No Event Name
No Event Name
Page -
Page +
Prev.Day
Next Day
Exit TV/Radio
Enter
Navigate
View Info
Note:
• If you select an event which has already started, the selected program will be
displayed on the screen, as you cannot set the timer for a programme which
has already started.
• To display the stored event timer, press GUIDE twice. The EPG Timer menu
(see step 3 below) will appear. You can also delete or change the frequency
(Once / Daily / Weekly) of the stored event timer (but please note that you
cannot edit the time details that have been set from the EPG).
2
If you try to switch to
another channel while
an event timer is in
progress, the following
message will appear:
‘WARNING: CHANG-
ING THE CHANNEL
WILL INTERRUPT YOUR
EVENT TIMER. ARE YOU
SURE YOU WANT TO
PROCEED? YES/NO’.
Select YES or NO
Confirmation
The confirmation banner will be displayed.
Press B or A to select ‘Yes’ or ‘No’, then press
This programme has not yet started - Do you want to
set a timer event ?
Yes
No
ENTER (the selected option is shown in blue).
Event Timer
Service Name Mode
Date
Time
Duration
00:23
BBC ONE
Once
26/02/02 8:10
3
The EPG Timer menu will appear.
Press the Red key to set the Timer mode for a
selected event.
Timer mode
Edit Timer
Delete Timer
Edit Duration
Enter
Exit
Navigate
according to your
wishes.
Event Timer
Service Name Mode
BBC ONE Once
4
Date
26/02/02
The Timer mode specifies the frequency of Timer
wake-up which can be set as Once, Daily or
Weekly.
Note:
Once
Daily
• A maximum of eight Timers
can be programmed.
• If the EPG Timer starts
when it is already switched
on, it will start at the exact
time that is set. If it starts
from the standby mode, it
will begin 20 seconds in
advance of the stated time.
• You cannot hasten the start
time from the original start
time of the Event.
Weekly
Press ENTER to save the selected Timer mode.
Note:
To delete an event timer, select the specified event, then press the Green key.
5
To return to the Guide menu, press DIGITAL MENU.
To clear the menu screen, press EXIT.
• You cannot set with the
same date and time of
another Event.
• The programme set as
event timer will be
highlighted in the Guide
menu.
Note:
• Press the Yellow key to change the start time of the event.
• Press the Blue key to change the time duration of the event.
• If the unit goes to standby mode (by pressing
(STANDBY) on the unit or
(STANDBY) on the remote control) after the EPG Timer has been set.
31
50A0201A_p26-31.p65
31
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
DVD discs must be Region 2 or Region ALL type to play on this unit.
The loaded Disc (DVD and Audio-CD) will be recognized automatically.
The suitable disc formats are: DVD-Video, DVD-R/-RW (Video format only), Audio CD, CD-R/CD-RW, Video CD and
SVCD.
Some CD-R/RW discs may be incompatible.
• This unit can play an 8cm disc. Please do not use a disc adapter. It may cause trouble.
• Please do not insert any disc of an irregular shape into the unit, as it may interfere with the function of the unit.
You may not be able to remove it.
• Please do not use after market accessories, such as a ring protector, as this may cause trouble with the
operation of the unit.
Do not play DVD-ROM, DVD-Audio, CD-G or Photo CD to prevent accidental erasure of prerecorded material.
Title
When two or more movies are recorded on a disc, the disc is
divided into two or more sections. Each section is called a “TITLE”.
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Track
Audio-CD
An Audio CD can contain several items.
These are assigned to tracks.
TRACK
1
TRACK
2
TRACK
3
TRACK
4
TRACK
5
Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the
disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.
Cleaning Disc
Wipe the disc with a clean, dry cloth from center to edge.
• Do not wipe in circular direction.
• Do not use liquid or aerosol cleaners.
On Video CDs
This unit supports Video CDs equipped with the PBC (Version 2.0) function. (PBC is
the abbreviation of Playback Control.) You can enjoy two playback variations
depending on types of discs.
•Video CD not equipped with PBC function
(Version 1.1) Sound and movie can be played on this DVD/VCR in the same way as an audio CD.
•Video CD equipped with PBC function
(Version 2.0) In addition to operation of a Video CD not equipped with the PBC function, you can enjoy playback
of interactive software with search function by using the menu displayed on the TV screen (Menu Playback). Some
of the functions described in this owner’s manual may not work with some discs.
To turn off the PBC
1. Press PLAY MODE in the Stop mode.
2. Press ▲/▼ to select “Mode”, then press ENTER repeatedly unit “off” appears.
3. Press PLAY MODE again to clear the screen.
To turn on the PBC
Follow the above step 1~2, then press ENTER repeatedly unit “PBC” appear.
32
50A0201A_p32-37.p65
32
9/12/07, 4:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so
may cause serious personal injury.
Basic playback (DVD/VCD/Audio CD)
Preparation
Make sure that the POWER ( ) switch on the top of the unit is pushed in (ON). (The STANDBY
indicator lights up.)
1
Press TV/DVD on the remote control to select the DVD mode, or press INPUT
SELECT and press ▲ or ▼ to select DVD, then press ENTER.
2
Place the disc in the disc slot with the label side
facing forward. (If the disc has a label.)
Hold the disc without touching either of its surfaces,
align it with the guides, and place it in position.
• DO NOT FORCE THE DISC, THIS CAN
DAMAGE THE MECHANISM, LIGHTLY PUSH THE
DISC UNTIL IT IS ACCEPTED.
3
Reading
On the TV-screen, “ ” changes to
“Reading” and then playback
commences.
• A menu screen will appear on the
TV screen if the disc has a menu
feature.
• Press ▲/▼/B/A to select title, then press ENTER.
Title is selected and play commences.
4
Press to end playback.
• The unit records the stopped point, depending on the disc. “ ” appears on
the screen. Press PLAY ( ) to resume playback (from the scene point).
• If you press again (“ ” appears on the screen.), the unit will clear the
stopped point.
To start playback in the stop mode
Press PLAY ( ).
Note:
• If the unit does not operate property:
Static electricity, etc., may affect the player’s operation.
Disconnect the AC power cord once, then connect it again.
33
50A0201A_p32-37.p65
33
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
To pause playback (still mode)
Press during playback.
To resume normal playback, press PLAY ( ).
• The sound is muted during still mode.
To stop playback
Press
.
To remove the disc
Press
.
Remove the disc after the disc comes out.
Note:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or
“Parental Error” will appear on the TV screen according to the type of loaded
disc. In this case, check your disc again (see pages 32 and 50).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label backwards (i.e. the wrong way),
“Reading” will appear on the display for a few minutes and then “Incorrect
Disc” will continue to be displayed.
• Some discs may not work the resuming facility.
• Resuming cannot function when you play a PBC-featured Video CD while the
PBC is on. To turn off the PBC, see page 32.
• Some playback operations of DVDs may be intentionally fixed by software
producers. Since this unit plays DVDs according to the disc contents the
software producers designed, some playback features may not be available.
Also refer to the instructions supplied with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• In many instances, a menu screen will appear after playback of a movie is
completed. Prolonged display of an on-screen menu may damage your
television set, permanently etching that image onto its screen. To avoid this, be
sure to press POWER ( ) on your remote control once the movie is
completed.
• There may be a slight delay between the button is pressed and the function
activates.
34
50A0201A_p32-37.p65
34
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
Note:
You can play discs at various speeds.
•A prohibition symbol “ ”
may appear at the upper
right of the screen. This
symbol means either the
feature you tried is not
available on the disc, or the
unit cannot access the
feature at this time. This
does not indicate a problem
with the unit.
Playing in fast reverse or fast forward directions (DVD/VCD/Audio
CD)
Press
or
during playback.
:
Fast reverse playback
:
Fast forward playback
Each time you press
or
, the playback speed changes.
To stop playback
Press
.
Note:
• The unit mutes sound during reverse and forward scan of DVD/VCD/Audio
CD discs.
• The playback speed may differ depending on the disc.
Playing frame by frame (DVD/VCD)
Press during still playback.
Each time you press , the picture advances one frame.
To resume normal playback
Press PLAY ( ).
Note:
• The sound is muted during frame by frame playback.
Playing in slow-motion (DVD/VCD)
Press
or
during playback.
or , the slow-motion speed changes.
Each time you press
To resume normal playback
Press PLAY ( ).
Note:
• The sound is muted during slow-motion playback.
• Reverse slow ( ) does not work on VCD.
Locating a chapter or track (DVD/VCD/Audio CD)
Press
Press
or
repeatedly to display the chapter or track number you want.
to playback starts from the selected chapter or track.
Press
to locate succeeding chapters or tracks.
Playback starts from the beginning of the current chapter or track.
35
50A0201A_p32-37.p65
35
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming/Locating Desired Scene
Zooming (DVD/VCD)
This unit will allow you to zoom in on the frame image. You can then make
selections by switching the position of the frame.
1
1
Press ZOOM during playback.
The centre part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
(x 1.3), 2 (x 1.5) and 3 (x 2.0).
1
2
Press ▲/▼/B/A to view a different part of the frame.
You may move the frame from the centre position to UP, DOWN, LEFT or RIGHT
direction.
3
In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off).
Note:
• You can select the Pause or Slow in the zoom mode.
• Some discs may not respond to zoom feature.
Locating Desired Scene (DVD/VCD/Audio
CD)
Use the title, chapter and time recorded on the DVD disc to locate the desired
point to playback. In the case of VCD/Audio CD discs, time and track are used
to locate the desired point to playback. To check the title, chapter/track and
time, press .
Jump
1
Title
Chapter
Time
Press JUMP during playback or resume stop mode.
Jump
2
Title
Chapter
Time
Press ▲ or ▼ to select the “Title /Track”, “Chapter”
or “Time”.
3
Jump
Title
Chapter
Time
Press Number buttons (0–9) to input the number.
12
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the numbers.
4
Press ENTER. Playback starts.
• When you change the title, playback starts from Chapter 1 of the selected
title.
• Some discs may not work in the above operation.
Note:
• In case of the Audio CD and Video-CD, only Track and Time can be selected.
• In case of the Video-CD playback with PBC, the JUMP does not work. Turn off
the PBC (see page 32).
36
50A0201A_p32-37.p65
36
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Marking desired scenes
Note:
• Some discs may not work
with the marking operation.
• The marking is cancelled
when you eject the disc or
turn the power off.
• Some subtitles recorded
around the marker may fail
to appear.
Marking the scenes (DVD/VCD/Audio CD)
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
1
Marker 1
Press MARKER during playback.
Marker 2
Marker 3
• In case of Video CD with
PBC, Marker function is
prohibited.
• Marker function does not
work with MP3/JPEG CD.
2
Marker 1
Marker 2
Marker 3
00 27 54
Select the blank Marker using ▲ or ▼.
Then press ENTER at the desired scene.
• Repeat this procedure to set the other 2 scenes.
3
Press MARKER to clear this display.
Returning to the scenes (DVD/VCD/Audio
CD
1
Marker 1
Marker 2
Marker 3
00 27 54
01
16 25
Press MARKER during playback or stop mode.
02
08 31
2
Marker 1
Marker 2
Marker 3
00 27 54
01
02
16 25
08 31
Press ▲ or ▼ to select the Marker 1-3.
3
Press ENTER.
Playback starts from the marked scene.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
37
50A0201A_p32-37.p65
37
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Playback/A-B Repeat Playback
Repeat playback (DVD/VCD)
1
Press PLAY MODE during playback or stop mode.
Play Mode
: Off
2
Repeat
Press ENTER repeatedly to select “Chapter” or “Title”.
The unit automatically starts repeat playback after finishing the current title or
chapter.
[Video CD]
Press ▼ to select “Repeat”.
Press ENTER to select “Track” or “All”.
• If you set the repeat mode during stop mode, press PLAY ( ) to start Repeat
playback.
3
Press PLAY MODE again to clear the screen.
To resume normal playback
Select Repeat : “Off” in step 2.
Note:
• Some discs may not work with the repeat operation.
• In case of Video CD with PBC, Repeat functions are prohibited during
playback.
• Chapter/Track repeat function is cancelled whenever SKIP (
) is pressed.
) or SKIP
(
A-B Repeat Playback (DVD/VCD/Audio
CD)
A-B repeat playback allows you to repeat selection between two selected points.
A
1
Press REPEAT A-B during playback.
The start point is selected.
2
Press REPEAT A-B again.
A
B
The end point is selected. Playback starts at the
point that you selected.
Playback stops at the end point and returns to
Point A automatically, then starts again.
To resume normal playback
Press REPEAT A-B again.
“
” appears on the screen.
Off
Note:
• In A-B Repeat mode, subtitles near the A or B locations may not be displayed.
• You may not be able to set A-B Repeat for the scenes that include multiple
angles.
• A-B Repeat playback does not work when Repeat playback is activated.
• You may not be able to set A-B Repeat during certain scenes of the DVD.
38
50A0201A_p38-41.p65
38
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Angles/Title Selection/DVD menu
Changing Angles (DVD)
When playing back a disc recorded with multi-angle facility, you can change the
angle that you are viewing the scene from.
1/2
1
Press ANGLE during playback.
The current angle will appear.
2
Press ANGLE repeatedly until the desired angle is selected.
Note:
• Depending on the DVD, you may not be able to change the angles even if
multi-angles are recorded on the DVD.
Title Selection (DVD)
Two or more titles are recorded on some discs. If the title menu is recorded on
the disc, you can select the desired title.
1
Press TOP MENUduring playback.
Title menu appears on the screen.
2
Press ▲/▼/B/A to select the desired title.
3
Press ENTER or PLAY ( ).
The playback of the selected title will start.
Note:
• Depending on the DVD, you may not be able to select the title. Depending on
the DVD, a “title menu” may simply be called a “menu” or “title” in the instruc-
tions supplied with the disc.
DVD menu (DVD)
Some DVDs allow you to select the disc contents using the menu.
When you playback these DVDs, you can select the subtitle language and
soundtrack language, etc. using the menu.
1
Press DVD MENU during playback.
The DVD menu appears on the screen.
• Press DVD MENU again to resume playback at the scene when you
pressed DVD MENU.
2
Press ▲/▼/B/A to select the desired item.
3
Press ENTER.
The menu continues to another screen. Repeat steps 2 and 3 to set the item completely.
Note:
• Depending on the DVD, you may not be able to resume playback from the
scene point when you press DVD MENU.
39
50A0201A_p38-41.p65
39
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Soundtrack Language/Subtitles/Disc Status
Note:
• If the desired language is
Changing Soundtrack Language (DVD/
not heard after pressing the
button several times, the
VCD)
language is not recorded
You can select the language when you play a multilingual disc.
on the disc.
• The selected soundtrack
language is cancelled
when you eject the disc.
The initial default language
or available language will
be heard if the disc is
played back again.
1/2 Eng Dolby Digital
1
Press AUDIO during playback.
The current soundtrack language will appear.
2
2/2 Fre Dolby Digital
• If you select DTS in playing
DTS-encoded disc, no
sound will be heard.
Press AUDIO repeatedly until the desired language is
selected.
• Depending on the DVD,
you may not be able to
change subtitles, or to turn
subtitles on or off.
• While playing a DVD, the
subtitle may change when
you loaded or eject the
disc.
• In some cases, a selected
subtitle language may not
be changed immediately.
• The on screen display will disappear after a few seconds.
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
LR
L
R
Subtitles (DVD)
When playing back a disc recorded with subtitles, you can select the subtitle
language or turn the subtitle off.
1
1/5 Eng
Press repeatedly during
playback until the desired language is selected.
2
To turn off the subtitle, press until “Off” appears.
• The on screen display will disappear
after a few seconds.
Off
Disc status
With press of , the status of the disc will appear on the screen.
To cancel the display, press again.
[Video CD]
[DVD]
TOTAL
TIME
ELAPSED
TIME
ELAPSED
TIME
TOTAL
TIME
DISC OPERATION
DISC OPERATION
DVD
00:15:25 01:41:39
Chapter 2/24
1/2 Eng
VCD
00:08:32 00:51:03
TITLE NO.
Title 1/3
1/1 Eng Dolby Digital
1/1
Track 3/15
CHAPTER NO.
ANGLE NO.
SUBTITLE LANGUAGE
A KIND OF AUDIO
TRACK NO.
AUDIO LANGUAGE
40
50A0201A_p38-41.p65
40
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG and Audio CD operation
This unit can playback the MP3/WMA/JPEG-data which has been recorded on CD-R/RW. Audio CD also can be
played back. To produce the MP3/WMA JPEG-data, you need a Windows-PC with CD-RW drive and a MP3/WMA
JPEG-encoding Software (not supplied). The Apple-HFS-System cannot be played.
This unit requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality.
There are many different types of recordable disc formats (including CD-R containing MP3/WMA files). Not all
recordable discs will produce optimal playback quality. The technical criteria set forth in this instruction manual are
meant only as a guide. Use of CD-RW for MP3 files is not recommended.
MP3/WMA/JPEG - data information
Limitations on MP3/WMA/JPEG playback
• MP3/WMA/JPEG CD are standardized by ISO9660, its file name must include following extensions; “.mp3”,
“.wma”, “.jpg”.
• MP3/WMA/JPEG CD must be corresponded to the ISO standardized files.
• This unit can read 2000 files per disc. If one disc has more than 2000 files, it reads up to 2000 files, the
remaining files will be omitted.
• MP3/WMA/JPEG CDs cannot be used for the purpose of recording on this unit.
• If the CD has both CDA audio tracks and MP3/WMA/JPEG files, only the CDA audio tracks will be played.
• It may take more than one minute for this unit to read MP3/WMA/JPEG files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be played back.
• The music files recorded by “Hierarchical File System” (HFS) cannot be played.
Limitations on displaying of the file name.
• The maximum number for display is 15 characters. Long file names will be condensed.
• Available characters for display are the following:
capital or small alphabets of A through Z, numbers of 0 through 9, and _ (under score).
• Other characters than those above are replaced in hyphen.
To playback MP3/WMA/JPEG CD in the recorded order.
1. Use MP3/WMA/JPEG software that records data alphabetically or numerically.
2. Insert two or three digit number in the head of file name. (ex. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
• The CD-R/RW that has no music data or non MP3/WMA/JPEG files cannot be played back.
Standard sampling frequency and the bit rate:
MP3
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of
constant bit rate.
WMA
WMA version 7 and 8
32kHz/48kbps, 44.1kHz/48kbps~192kbps, 48kHz/128kbps~192kbps
The file recorded by mono, 48kHz, 48 kbps is not available to this unit.
41
50A0201A_p38-41.p65
41
9/12/07, 4:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG and Audio CD operation
Loading CD
1
Load a MP3/WMA/JPEG CD or an Audio CD into the disc slot.
Operation status
File number Elapsed time Selected file name
2
1/15 00:00:00
/MP3-5.MP3
A file browser screen will appear on the screen.
• In case the current directory includes 9
Select Files
MP3-5
Repeat :Off
MP3-6
Tool kit
window
Mode
:Off
WMA-11
WMA-12
Picture-1
files or more, press ▲ or ▼ to scroll in
File list
the file list.
• To see contents in folder, select the
folder and then press ENTER.
To return to the parent directory, select
Picture-2
Picture-3
Music Playing
Picture-4
“
Go Up ...” then press ENTER.
Cursor
Preview window
• In case of a CD containing a mixture
of MP3, WMA and files, the files are
played back by selecting them from the
file browser.
File type
: Indicates Music file (Audio CD/MP3/WMA)
: Indicates Picture file (JPEG)
MP3/WMA and Audio CD playback
1
In the file browser, press ▲/▼ to select the desired file.
/MP3-2.MP3
Select Files
Folder-1
Folder-2
MP3-1
Repeat :Off
Mode
:Off
MP3-2
MP3-3
When PLAY ( ) is pressed after displaying file browser
WMA-1
displayed, or when the disc tray is closed by pressing
WMA-2
JPEG Preview
PLAY ( ), playback begins automatically starting from
the first file. In this case, if the first file is an MP3/WMA
WMA-3
file, only MP3/WMA files are played back in order. If the first file is a JPEG file, the first
JPEG file is played back. If there is no file at a root directory, playback does not begin
automatically.
2
Press ENTER.
The selected file starts playing back.
3
Press to end playback.
The selected file starts playing back.
• The unit records the stopped point. “ ” appears on the screen. Press PLAY ( ) to
resume playback (from the scene point).
• If you press again or unload the disc, the unit will clear the stopped point.
Note:
• MP3 or WMA file on the Kodak Picture CD is not recognized on this unit.
• During MP3/WMA/JPEG-Playback, you cannot use JUMP and A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and Program playback for MP3/
WMA/JPEG-Playback (See pages 44,45)
Select Files
The file type to make it display in the file browser can be chosen.
1. Press B or A to select “Select Files” at right column in the file browser.
• Press ENTER, then press ▲ or ▼ to select file type from the list (Music or Picture).
1. Press ENTER to add/remove check mark. Checked file type will be displayed in the
file browser.
2. Press RETURN to save the setting.
42
50A0201A_p42-45.p65
42
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG and Audio CD operation
JPEG playback
1
In the file browser, press ▲/▼ to select the desired JPEG file.
To display a thumbnail list, press DVD MENU.
Press ▲/▼/B/A to select the desired file.
(To return to the file browser, press TOP MENU.)
When PLAY ( ) is pressed after displaying the file
/Picture-01.JPG
browser, or when the disc tray is closed by pressing
Select Files
Picture-01
Picture-02
Picture-03
Picture-04
Picture-05
Picture-06
Picture-07
Picture-08
Repeat :Off
PLAY ( ), playback begins automatically starting
from the first file. In this case, if the first file is a JPEG
file, the first JPEG file is played back. If the first file is
an MP3/WMA file, only MP3/WMA files are
played back in order. If there is no file at a root
directory, playback does not begin automatically.
Mode
:Off
W: 2048 H: 1536
2
Press ENTER. The selected picture appears on the screen.
Rotating an image
You can rotate an image by 90 degrees.
Press ANGLE during playback of the image.
“
”, “
”, “
” or “
” appears on the
screen.
Zooming an image
Zoom function also can be used in viewing JPEG
files. Press ZOOM (See “Zooming” on page 36).
3
Press to end playback.
The file browser appears on the screen. If you want to watch the other file,
repeat steps 1 ~ 2.
Slide show playback
The slide show enables you to view pictures (files) one after another automati-
cally.
Preparation
Set “JPEG Interval” setting to “5 Seconds”, “10 Seconds” or “15 Seconds” (See
page 49).
1
Select your desired starting file for the slide show in step 1 on the above column.
2
Press ENTER or PLAY ( ) to start slide show from the selected file.
• If you press during the slide show, the slide show stops temporary. “ ”
appears briefly on the screen.
• If the picture appears upside down or sideways, press ANGLE repeatedly
until it’s right side up. “
”, “
”, “
” or “
” appears on the screen.
• Press PLAY ( ) or SKIP ( ) again to resume the slide show.
• When the slide show playback finished, the file list appears.
• To stop the slide show, press . The file list appears.
Note:
• During JPEG playback, you cannot use Jump and A-B Repeat functions.
• When an image exceeds 5760 x 3840 pixels, the entire image (preview
window or thumbnail list) may not be displayed on a screen.
• It may have a longer interval due to the size of data.
43
50A0201A_p42-45.p65
43
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG and Audio CD operation
Note:
Repeat playback (Audio CD/MP3/WMA/
JPEG)
• The repeat or random
function is canceled when
you eject the disc or turn
the power off.
• The track repeat function is
1
canceled when
is pressed.
• In case of Audio CD, the
function of A-B Repeat also
can be used. See “A-B
Repeat playback” (See
page 38).
or
Select Files
Folder-1
Folder-2
MP3-1
Repeat :Off
In the file browser, press ▲/▼/B/A to select
Mode
:Off
“Repeat” during stop mode.
2
Select Files
Folder-1
Folder-2
MP3-1
Repeat :Track
Press ENTER repeatedly to select “Track” or “All”.
Mode
:Off
3
Press PLAY ( ).
The unit automatically starts repeat playback after finishing the current track.
To resume normal playback
Select Repeat : “Off” in step 2.
Random playback (Audio CD/MP3/
WMA/JPEG)
1
In the file browser, press ▲/▼/B/A to select “Mode” during stop mode.
2
Select Files
Folder-1
Folder-2
MP3-1
Repeat :Off
Press ENTER to select “Random”.
Mode
:Off
3
Press PLAY ( ).
The Random playback will start.
Select Files
Folder-1
Folder-2
MP3-1
Repeat :Off
Mode
:Random
To resume normal playback
Select Repeat : “Off” in step 2.
44
50A0201A_p42-45.p65
44
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG and Audio CD operation
Program playback (Audio CD/MP3/
WMA/JPEG)
1
In the file browser, press ▲/▼/B/A to select
Folder-1
Folder-2
MP3-1
Repeat :Off
Mode :Off
“Edit Mode”, then press ENTER.
Edit Mode
MP3-2
When “Edit Mode” is black color, you can mark
the files which you want to add into Program list.
2
MP3-1.MP3
Press ▲/▼/B/A to select the file you want to
Folder-1
Folder-2
MP3-1
Repeat :Off
Mode
:Off
add into the program list.
Edit Mode
MP3-2
Press ENTER. Selected file was marked.
Repeat this procedure to select the other files.
3
Press ▲/▼/B/A to select “Add To Program”.
Then press ENTER. All marked files are added
into the program list.
Folder-1
Folder-2
MP3-1
Edit Mode
Program View
Add To Program
MP3-2
When you finish storing the files you want into the
Program list, select “Edit Mode” again and press ENTER to release edit mode.
4
Press ▲/▼ to select “Program View”, then press ENTER. Program View shows
only the programed files that you have added in Step 2.
Browser View
Program View
Folder-1
Folder-2
MP3-1
Folder-1
Folder-2
MP3-1
Edit Mode
Browser View
Clear Program
Edit Mode
Program View
Add To Program
MP3-2
MP3-2
5
In the Program View, press PLAY ( ). The files start to playback in programmed
order that were added by you.
To remove file from program list in stop mode
In the Edit Mode, switch to Program View. Select the files you want to remove,
then press ENTER. Select “Clear Program” and press ENTER. Marked file is
removed from program list.
Note:
• The program function is canceled when you eject the disc or turn the power
off.
45
50A0201A_p42-45.p65
45
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Program playback/Random playback
You can arrange the playback order of tracks or files on the disc. And the unit
Note:
can also select tracks or files at random and playback them. These feature works
for Video CD.
• In case of Video CD with
PBC, you cannot set
Program playback.
• The program is cancelled
when you eject the disc
or turn the power off.
• In case of Video CD with
PBC, you cannot set
Random function during
playback.
For Audio CD and MP3/WMA/JPEG CD, please see “Random playback (Audio
CD/MP3/WMA/JPEG)” on page 44 and “Program playback (Audio CD/MP3/
WMA/JPEG)” on page 45.
Program playback (VCD)
Play Mode
Mode
: Off
1
2
3
— — —
— — —
— — —
Repeat
: Off
1
Program Playback
Press PLAY MODE during stop mode.
Play Mode
Mode
: Program
1
2
3
– – –
– – –
– – –
2
Repeat
: Off
Program Playback
Press ▲/▼ to select “Mode”, then press ENTER
to select “Program”.
Play Mode
Mode
: Program
1
2
3
9
3
Repeat
: Off
– – –
– – –
Program Playback
Press B/A to select the programming position.
Use Number buttons (0–9) to input the track numbers on sequentially.
• If you input a wrong number, press CANCEL.
Play Mode
4
Mode
: Program
1
2
3
9
3
Repeat
: Off
Press B/A to return to the left column,
then press ▲/▼ to select the “Program
Playback” and press ENTER.
11
Program Playback
The programs you selected will start to playback in order.
• To resume normal playback, select Mode “Off” in step 2.
To change the program
1. Select Mode to “Program” (as step 2), press B/A/▲/▼ to select the track
number you want to change, then press CANCEL.
2. Press Number buttons (0–9) to overwrite the new track number.
To clear the program one by one
Select Mode to “Program”, press B/A/▲/▼ to select the track number. Then
press CANCEL.
To clear all the programs
In the above column, press ▲/▼ to select “Clear Program”. Then press ENTER.
Random playback (VCD)
1
Press PLAY MODE during playback or stop mode.
Play Mode
Mode
: Random
1
2
3
– – –
– – –
– – –
2
Repeat
: Off
Program Playback
Press ▲/▼ to select “Mode”, then press ENTER
to select “Random”.
3
Press PLAY ( ).
The Random Playback will start.
•If you set “Random” during playback mode, Random playback will begin after
the track that is currently being played has ended.
•To resume normal playback, select Mode “Off” in step 2.
46
50A0201A_p46-49.p65
46
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing The Function Settings
You can change the default settings to customize performance to your
preference.
Setting procedure
Menu
Subtitle:English
Audio: English
: English
1
OSD:English
Press SETUP in stop mode.
The following on-screen display appears.
2
Press ▲ or ▼ to select the desired section,
then press A or ENTER.
3
First option will be highlighted.
Press ▲ or ▼ to select the desired option.
4
Then press A or ENTER.
The selectable settings will appear.
5
Change the selection using ▲ or ▼, by referring to the corresponding pages 48
~ 50.
Press ENTER to save the setting.
• Repeat steps 3 and 5 to change other option.
• To select another section, go back to step 2 by pressing
repeatedly.
or RETURN
B
6
To clear SETUP screen, press SETUP or press RETURN repeatedly.
Setting details
Section Option
Details
Page
48
Menu
To select the language of “Menu”, “Subtitle”
and “Audio” if more than one languages are
available on the disc.
To select a preferred language for on screen
display.
Subtitle
Audio
OSD
TV Screen
Display
To select a picture size according to the aspect
ratio of your TV.
To turn On or Off the operational status display
on the screen.
Picture Mode To select a preferred picture mode from
“Video”, “Film” or “Auto”.
JPEG Interval To select a preferred setting for the slide show
playback.
Night Mode To select On or Off for Night Mode.
49
50
Digital Out
To select a digital output sound format
corresponding to your system connection.
Parental
To select a preferred parental level for the
parental setting.
Password
To change the password.
47
50A0201A_p46-49.p65
47
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing The Function Settings
Menu, Subtitle, Audio
Menu
Subtitle:English
Audio: English
: English
You can select the language of “Menu”, “Subtitle”
and “Audio” if more than one language is
recorded onto the disc.
OSD:English
English, Deutsch, êÛÒÒÍËÈ, Italiano, Espanol:
The selected language will be heard or seen.
Other:
Other languages can be selected
(see “Language code list” on page 52).
Off (Subtitle):
Subtitles do not appear.
Original (Audio):
The unit will select the first priority language of each disc.
Note:
• If the selected language is not recorded on the disc, the first- priority language
is selected.
OSD
The setup language can be selected.
English:
To display OSD language is English
Deutsch: To display OSD language is German
êÛÒÒÍËÈ: To display OSD language is Russion
Italiano: To display OSD language is Italian
Espanol: To display OSD language is Spanish
TV Screen
You have the following screen sizes to choose from:
4:3
(Letterbox)
When playing back a wide screen-DVD disc, it
displays the wide picture with black bands at the
top and bottom of screen.
4:3
(Panscan)
It displays the wide picture on the whole screen
with left and right edges automatically cut off.
16:9
(Wide screen)
A wide screen picture is displayed full size.
Note:
• If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style.
Display
On screen display can be switched on or off when you press any buttons.
Off: On screen displays do not appear when you press any buttons.
On: On screen displays appear when you press the buttons (factory setting).
48
50A0201A_p46-49.p65
48
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing The Function Settings
Picture Mode
There are two types of source content in pictures recorded in DVD video discs:
film content (pictures recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per second). Make this selection
according to the type of content being viewed.
Auto: Select this selection normally.
The DVD player automatically detects source content, film or video of
playback source, and converts that signal in an appropriate method.
Film: The DVD player converts film content pictures appropriately. Suitable for
playback of film content pictures.
Video: The DVD player filters video signal, and converts it appropriately.
Suitable for playback of video content pictures.
Note:
• Depending on the disc, pictures may be cut off or doubled. In this case, select
“Video”.
JPEG Interval
You can continuously playback all JPEG files automatically.
After the selection below, the disc will start playback on JPEG files which have
been recorded.
Off:
Plays back one file at a time.
5 Seconds: Plays back images in the form of a slide show at 5 second
intervals.
10 Seconds: Plays back images in the form of a slide show at 10 second
intervals.
15 Seconds: Plays back images in the form of a slide show in 15 second
intervals.
Night Mode
Night Mode enables you to control the dynamic range so as to achieve a
suitable sound for your equipment.
Off:
It plays back at the recording level on the
disc.
NightMode
DigitalOut: PCM
: Off
On:
Loud sound such as explosion is toned down
slightly when played back. This is suitable
when it is connected to a stereo.
Note:
• This function works only when the disc recorded with Dolby Digital is played
back.
• The level of Night Mode may differ depending on DVD video disc.
Digital Out
You can select the digital output sound format corresponding to your system
connection.
Off: There is no sound output from DIGITAL AUDIO OUT jack.
PCM:Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo amplifier.
Bitstream: Disc audio bitstream data will be output.
Note:
• Even if you select “Bitstream”, MPEG Audio will be output in PCM format.
49
50A0201A_p46-49.p65
49
9/12/07, 4:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing The Function Settings
Parental
Some discs are specified as not suitable for children. Such discs can be limited
not to playback with the unit.
1) Press ▲ or ▼ to select “Parental”, then press ENTER. “Enter Password” screen
will appear.
Note:
• If each setup (pages 48 ~
50) has been completed,
the unit can always work
under the same condition
(especially with DVD
discs).
2) Press “0000” using Number buttons (0–9). (Please note, this is pre-setting
password of this unit). Then press ENTER. The parental level list
will appear.
• Level 1:
DVD software for adults cannot be played back.
Virtually all DVD software can be played back.
• Level 8:
Each setup will be retained
in the memory even if you
turn the power off.
• Level Off: The parental control setting does not function.
3) Press ▲ or ▼ to select from the level 1 to level 8. The limitation will be more
severe as the level number is lower. Then press ENTER.
4) Press
to activate Parental control setting.
Note:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating level information though
its disc jacket says “adult.” For those discs, the age restriction will notwork.
• The password is required every time when you change the parental level.
• If you input a wrong number, press CANCEL.
Password
1) Press ▲ or ▼ to select “Password”, then press ENTER. “Enter Current
Password” screen will appear.
2) Press Number buttons (0–9) to input the current password (If the password
has not been set yet after you purchase this unit, it is “0000”).
3) Then press ENTER. “Enter New Password” screen will appear. Press
Number buttons (0–9) to input the new password.
4) Press ENTER. Now your new password has been set. Be sure to remember
this number!
If you forget the password.
1) Press
to remove the disc.
2) While holding 7 down on the remote control and at the same time press
STOP (DVD) on the top panel. “Password Clear” appears on the screen. Now
the password has been returned to the initial value (“0000”).
50
50A0201A_p50-Back.p65
50
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Temporary Cancel The Rating Level By DVD Disc
Note:
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
• This temporary cancellation
of rating level will be kept
until the disc is ejected.
When the disc is ejected,
the original rating level will
be set again automatically.
It is up to you to decide whether to cancel the rating level or not.
1
Load a DVD disc.
2
If the DVD disc has been designed to temporarily cancel the Rating level, the
screen which follows the “Reading” screen will change, depending on which
disc is played. If you select “YES” with the ENTER key, password input screen
will then appear.
3
Enter the password with Number buttons (0–9). Then press ENTER.
To exit from the entry, press RETURN.
4
Playback will commence if the entered password was correct.
51
50A0201A_p50-Back.p65
51
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see pages 48).
Language Name
Abkhazian
Afar
Code
Language Name
Singhalese
Slovak
Code
2919
2921
2922
2925
1529
2931
2933
2932
3022
3017
3011
3030
3015
3018
1225
3019
3025
3028
3021
3033
3121
3128
3136
3219
3225
1335
3325
3418
2019
3525
3631
Language Name
Code Language Name
1620 Lingala
Code
2224
2230
2321
2317
2329
2322
2330
2319
2328
2325
2324
2411
2415
2425
2528
2611
2629
1611
2622
2630
2731
2823
2825
2831
2923
2911
1714
2928
2918
2924
2914
1112 Fiji
1111 Finnish
1116 French
2927 Frisian
1123 Galician
1128 Georgian
1835 German
1129 Greek
1619 Lithuanian
1628 Macedonian
1635 Malagasy
1722 Malay
Afrikaans
Albanian
Amharic
Arabic
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
2111 Malayalam
1415 Maltese
1522 Maori
Armenian
Assamese
Aymara
1135 Greenlandic
1136 Guarani
1211 Gujarati
1531 Hausa
2122 Marathi
1724 Moldavian
1731 Mongolian
1811 Nauru
Azerbaijani
Bashkir
Tamil
Basque
Tatar
Bengali; Bangla
Bhutani
1224 Hebrew
1436 Hindi
1933 Nepali
Telugu
1819 Norwegian
1831 Oriya
Thai
Bihari
1218 Hungarian
1228 Icelandic
1217 Indonesian
2335 Interlingua
1215 Irish
Tibetan
Tigrinya
Tonga
Breton
1929 Panjabi
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
1924 Pashto, Pushto
1911 Persian
Turkish
Turkmen
Twi
1711 Polish
2123 Italian
1930 Portuguese
2011 Quechua
2033 Rhaeto-Romance
2124 Romanian
2129 Russian
1311 Japanese
3618 Javanese
1325 Kannada
1828 Kashmiri
1329 Kazakh
1411 Kirghiz
2422 Korean
1524 Kurdish
1525 Laothian
1530 Latin
Ukrainian
Urdu
Chinese
Corsican
Croatian
Czech
Uzbek
Vietnamese
Volapük
Welsh
2121 Samoan
2135 Sanskrit
Danish
Dutch
2125 Scots Gaelic
2131 Serbian
Wolof
English
Xhosa
Esperanto
Estonian
Faroese
2225 Serbo-Croatian
2211 Shona
Yiddish
Yoruba
Zulu
1625 Latvian, Lettish
2232 Sindhi
52
50A0201A_p50-Back.p65
52
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
If your unit does not work properly check the following before calling a service engineer.
CAUSE
SYMPTOMS
POWER
SOLUTION
PAGE
–
TV does not operate.
Internal error may occurs.
Unplug the unit for 1 minute, then plug it back
in.
The Mains lead is disconnected.
Main power (ON) switch is OFF.
Connect the Mains lead to the AC outlet.
Set it to ON.
3
2
No power.
TV BROADCAST RECEPTION
The Mains lead is disconnected.
Connect the Mains lead to the AC outlet.
Check aerial connections or broken wires.
3
3
Aerial connector is not connected or wires
No picture, no sound.
are broken.
2
Sub Power ( ) button is off.
Possibly station trouble.
Possibly station trouble.
Press the Sub Power ( ) button.
Try another channel.
14
14
Try another channel.
Sound OK, poor
picture.
Aerial connector is not connected
or wires are broken.
Check aerial connections or broken wires.
3
Move the aerial away from the source of
interference.
Try another channel.
Possibly local interference.
–
14
–
Possibly station trouble.
Possibly local interference.
Move the aerial away from the source of
interference.
Picture OK, poor
sound.
Volume control set at minimum position.
Increase VOLUME control.
14
3
Aerial connector is not connected or wires
are broken.
Check aerial connections or broken wires.
Poor reception.
Possibly station trouble.
Try another channel.
14
Check aerial connections or broken wires.
Aerial connector is not connected or wires
are broken.
3
Possibly station trouble.
Try another channel.
14
Poor colour or no
colour.
Possibly local interference.
Move the aerial away from the source of
interference.
–
Adjust the colour settings.
Colour control is not adjusted.
18
Received channel has audio content only.
Some channel offers audio content only. It is
normal.
While viewing a DVB
(digital) channel, there
is sound but no
picture.
26
Blocky image or
image stops
Digital signal strength is low.
Check all aerial connections.
Move the aerial away from areas of possible
interference. Try using an aerial booster.
–
–
intermittently.
Some digital channels Some channels are encrypted and are only
Contact the service provider to subscribe.
cannot be viewed.
available via subscription.
“Database empty”
message appears on
the screen.
The auto tuning process has not been
successful.
Check all aerial connections and try auto
tuning again.
3
No sound when
connecting to external
source via HDMI to
DVI lead.
Audio leads have not be connected.
Ensure that seperate audio leads are
connected to the relevant audio input socket.
9
53
50A0201A_p50-Back.p65
53
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
CAUSE
SYMPTOMS
DVD
SOLUTION
PAGE
Eject the disc and clean it.
The disc is dirty.
32
–
The playback picture
has occasional
distortion.
Some times a small amount of picture
distortion may appear. This is not a
malfunction.
It is in fast forward or fast reverse
playback.
Insert a disc.
No disc is inserted.
An unplayable disc is inserted.
33
32
Insert a playable disc (Check the disc type
and colour system).
The disc is placed with the label side facing
backward.
Place the disc in the disc slot with the label
side facing forward.
The unit does not
start playback.
33
The disc is dirty.
The parental lock function is set.
Clean the disc.
32
50
Cancel the parental lock function or change
the parental lock level.
These operations may prevent a proper
progress of the contents.
It is in the mode of repeat playback,
memory playback, etc.
Playback does not
follow the course of
the disc’s program.
–
The function is prohibited with the unit or the
disc.
appears on the
screen.
–
35
REMOTE CONTROL
It is not aimed at the remote sensor.
–
–
Aim it at the remote control sensor.
Operate within 5 metres and reduce the light
Distance too far or there is too much light in
of the room.
the room.
Remote control does
not work.
–
–
Clear the path of the beam.
Replace batteries.
Obstacle in the path of beam.
Batteries are weak.
Install batteries correctly.
Polarities of the batteries, + or –, are not
inserted correctly.
–
* This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
*
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
*
“DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.
*
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the rights of
copyright owners and be contrary to copyright laws.
54
50A0201A_p50-Back.p65
54
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TELEVISION
System:
Analogue:
Digital:
PAL UK, IR, CCIR, FRENCH System, B/G, D/K, I/I, L
DVB-T (OFDM 2k/8k 16QAM/64QAM)
AV Input receivable: NTSC 3.58, NTSC 4.43/PAL 60
Preset channels:
Frequency Range:
Analogue channels (99) + Digital channels (Carrier 200/Service1000)
Analogue:
Digital:
18.95” TYPE (48.14 cm visible)
IreE2~E4, X~Z+2, S1~S10, E5~E12, S11~S41, E21~E69
E5~E12, ItaE~G, F1~F6, Rus6~12, E21~E69
LCD:
TFT low-glass Active Matrix Colour LCD, 1440 x 900 Pixel
Viewing Angle:Left/Right: 80 degree, Up/Down: 80 degree
Antenna input: UHF/VHF 75 Din type (Analogue Digital)
Terminals
AV1:
AV2:
SCART (AV input, RGB input, TV output)
S-VIDEO (Y/C input), RCA pin (AV input)
COMPONENT: COMPONENT (Y/PB (CB)/PR (CR) input), RCA (Audio input)
HDMI:
PC:
HDMI, Ø 3.5 mm jack (Audio input*)
Ø 3.5 mm jack (Audio input*), 15 pin mini D-sub (PC/
Component)
C. I. (Common Interface): EN50221
DIGITAL AUDIO OUTPUT: RCA pin (Audio)
Headphones: Ø 3.5 mm jack (Audio output)
* Audio input that share with HDMI and PC.
1.5W x 2 (MAX)
Audio Output Power:
DVD
Signal system:
Applicable disc:
Frequency response:
S/N Ratio:
NTSC, PAL
DVD (12cm, 8cm), CD (12cm, 8cm)
DVD:
85dB
4Hz - 22KHz, CD: 4Hz - 20KHz
Harmonic distortion:
Output:
0.02%
Audio :
(RCA) –12.0 dBm, 1 k
Digital Audio : 0.5Vp-p/75
Pickup:
CD :
Wavelength: 775 - 805 nm
Maximum output power: 0.5 mW
Wavelength: 640 - 660 nm
Maximum output power: 1.0 mW
DVD :
GENERAL
Power Source:
Power Consumption:
Weight:
AC 220-240V, 50Hz
60 W
6.7 kg
Dimensions:
Operating Temperature:
483(W)x396(H)x190(D)mm
5°C to 40°C
REMOTE CONTROL UNIT
Power Supply:
DC 3V (Two batteries, AA/ R6/ UM-3)
Weight and Dimensions are approximate. Because we continually strive to improve our products we may change specifications
and designs without prior notice.
55
50A0201A_p50-Back.p65
55
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
56
50A0201A_p50-Back.p65
56
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
........................................................................................................................................
57
50A0201A_p50-Back.p65
57
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales Service
Whilst Orion products have been designed and manufactured to a very high standard and have been
subjected to rigorous quality control, regrettably problems can sometimes occur.
In the unlikely event of a manufacturing defect occurring during the first twelve months of ownership, your
Dealer, Mail Order or Catalogue Company, from whom you purchased the product, will arrange for free-of-
charge service to be carried out. However as this may NOT include a home visit, please ensure that you have
received details of their respective service procedures and policy at the time of purchase.
Free-of-charge service covers the product for domestic use only, and does not cover any fault or defect
caused by accident, misuse, lightning strike, fire or water damage, neglect, connection to an incorrect mains
voltage or inadequate aerial, cable or satellite installation.
None of the foregoing comments or statements affect your Statutory Rights as currently provided for by law in
the United Kingdom.
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories.
With over 1 million spares and accessories in stock we can deliver direct to your door the very next day.
or call
0870 6001 338
(UK customers only)
Calls charged at National Rate.
Electrical and electronic equipment should never be disposed of with general household waste but must be separately collected
for their proper treatment and recovery.
The crossed out bin symbol, placed on the product, reminds you of the need to dispose of the product correctly at the end of its
life.
In this way you will assist in the recovery, recycling and reuse of many of the materials used in this product.
Where possible recycle your packaging.
With your help it is possible to reduce the amount of electrical and electronic waste ending up in landfill and to improve quality
of life by preventing the release of potentially hazardous substances into the environment.
50A0201A_p50-Back.p65
58
9/12/07, 5:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|