Vacuum Cleaner
user manual
English
imagine the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
iMPortaNt saFetY iNstructioNs
Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance,
basic precautions should always be followed, including the following :
PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING : To reduce the risk of fire, electric shock, or injury.
•
Do not leave vacuum cleaner unattended when it is plugged in.
•
Unplug from outlet when not in use and before servicing.
•
Do not use outdoors or on wet surfaces.
•
Do not allow children to operate vacuum cleaner or use as a toy.
•
Close attention is necessary when used by or near children.
•
Use only as described in this manual. Use only manufacturer’s recommended attachments.
•
Do not use with damaged cord or plug.
•
If vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors or
dropped into water, return it to a service center.
•
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull the cord around
sharp edges or corners. Keep cord away from heated surfaces.
•
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
•
Do not handle vacuum cleaner or plug with wet hands.
•
Do not put any object into openings. Do not use with any opening blocked; keep openings free of
dust, lint, hair and anything that may reduce air flow.
•
Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
•
Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
•
Do not use without dirt cup or filters in place. Empty dirt cup and clean filter frequently when picking
up very fine materials such as powder.
•
Turn off all controls before unplugging vacuum cleaner.
•
Use extra care when cleaning on stairs.
•
Do not use to pick up flammable or combustible materials such as gasoline or fine wood, fine wood
sandings or use in areas where they may be present.
Store your vacuum cleaner indoors, in a cool and dry area.
Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner.
•
•
•
Always turn off this appliance before connecting or disconnecting the hose, removing the bottom
plate for maintenance.
Use only on dry, indoor surfaces, never change the plug in any way.
Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
Do not touch the brush roller when it is rotating.
Keep suction away from your face when using nozzles and pipe.
Do not pull the power cord around sharp corners and do not allow it to be trapped.
Unplug before connecting turbine nozzle.(only using turbine-brush model)
•
•
•
•
•
•
•
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not play with the appliance.
•
The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
•
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
SAVE THESE INSTRUCTIONS
This vacuum cleaner is intended for household use only.
Safety information _ 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
05. introduction
AssemblING The C0leAN5eR
OpeRATING The C0leAN9eR
06. Product accessories
07. assembling the cleaner
08. tool storage
09. cord release
09. Power foot height adjustment
10. Power switch/Power foot brush roll switch
10. circuit break (reset switch)
11. How to operate
12. using accessories
13. Longreach cleaning
hOW TO O1peR1ATe
14. check rotating floor brush and drive belt
14. replace drive belt
mAINTAIN TOOls ANd fIlTeR
15. smart inverter
14
16. Powered hand tool(turbine brush)
17. emptying the dust bin
18. cleaning the dust bin &
re-assembling the dust bin
19. Washing your filter
TROUble sh2OOT0ING
4_ Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the cleaner
iNtroductioN
Handle
Cord clip
Hose
Carrying handle
(Dust bin handle)
Extension
pipe wand
Dusting
brush
holder
Hanger cord
Dust bin
Hose
guide
Crevice
tool holder
Smart
inverter
Height
adjustment
knob
Power foot
(Brush roll)
Handle
release
Furniture
guard
FRONT
bACK
Do not plug in your vacuum cleaner until you are familiar with all instructions
and operating procedures.
CAUTION
WARNING
Plastic film can be dangerous. To avoid danger of suffocation, keep away from
babies and children.
Assembling the cleaner _ 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the cleaner
Product accessories
carton contents
Ⓐ
Ⓑ
Ⓒ
Ⓓ
Empty carton. Find the parts shown above before disposing of packing materials.
A. Vacuum cleaner body
B. Handle
C. Hose
D. Extension Pipe wand
accessories
Ⓔ
Ⓕ
Ⓖ
The accessories are packed on the cleaner.
E. Crevice tool
F. Mini turbo brush
G. Dusting brush/Upholstery brush
6_ Assembling the cleaner
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the cleaner
1
3
4
5
2
1
2
3
4
5
slide fully retracted extension wand into the handle until you hear a click.
slide fully retracted wand and handle into the slot on body until you hear a click.
Makes sure slot guides and inserts.
slide fully retracted hose into the handle until you hear a click.
Put hose into hose guide down the back of the vacuum cleaner.
slide fully connected hose with the inverter.
Assembling the cleaner _ 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling the cleaner
tooL storaGe
Attach tools. Clip turbo tool into the caddy on the front of the handle.
Attach dusting tool into the dusting tool holder on side of the body.
Attach crevice tool into the crevice tool holder on side of the body.
Mini turbo brush (turbine brush)
•
use for upholstered furniture, carpeted stairs
and hard to reach places.
dusting brush/upholstery brush
•
use for carved furniture, table tops, books,
lamps, lighting fixtures, venetian blinds, base
boards, shutters and registers.
crevice tool
•
use in corners, on stairs, baseboards, and
behind furniture.
8_ Assembling the cleaner
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the cleaner
cord reLease
Turn cord release 180 degrees for easy cord removal.
Store cord wraps to keep out of the way while vacuuming.
Cord release Up
PoWer Foot HeiGHt adjustMeNt
The power foot on your SAMSUNG vacuum cleaner can be adjusted to clean
several floor surfaces.
For optimal cleaning performance, adjust to the lowest practical setting.
If your cleaner is difficult to push, adjust to the next higher setting.
1. Place handle in upright position
2. Turn height adjustment knob to
desired setting
Lowest setting – For bare floors
6 step setting – For various c
low carpet setting
– For short and medium pile
high carpet setting
– For plush pile carpets
Operating the cleaner _ 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the cleaner
Power switch/Power foot brush roll switch
Dust bin release
Power ON/OFF
Power control
Pipe release
Brush roll on/off
The Power on/off button is located on the top body.
Turn on vacuum by power button after plugging cord into electrical outlet.
The vacuum is automatically controled by the dirt senser.
The dirt sensor is automatic power control by dust amount.
There are 3 suction power levels by power control button.
The Power foot brush on/off button turns the rotating brush roll on and off.
Turn brush roll switch on to clean carpet and rugs.
Turn brush roll switch off to clean hard surface floors.
The brush rolls will automatically turn off when the handle is in the upright position.
circuit breaker (reset switch)
The circuit breaker turns off the brush rolls if there is an obstruction in them.
The brush rolls will not turn, but the suction motor will continue to run.
To reset the breaker, turn cleaner off and unplug it. Clear obstruction.
Press circuit breaker switch to the on position. Turn cleaner on and continue
cleaning.
10_ Operating the cleaner
Download from Www.Somanuals.com. All Manuals Search And Download.
How to operate
Plug cord into electrical outlet.
Press power on/off button.
Push cleaner handle release down with foot
and pull handle towards you.
Handle release pedal is located on the lower
left side you look at the back of the vacuum
cleaner.
Handle Positions
Select the desired angle of the cleaner using the handle release pedal.
The handle of your cleaner has three positions.
Raise or lower the handle and release the pedal.
A. Upright
A
For storage and elevated cleaning
with cleaning tools.
b. medium position
For general operation on carpet
and floors.
B
C. low position
Use for reaching under
low furniture.
Step on handle release
lever to lower handle.
C
Rotating drum-brush could cause the fringe of a rug to become tangled within
cleaner. Use caution and turn off the drum-brush when vacuuming throw rugs
with fringe.
CAUTION
Your SAMSUNG vacuum cleaner is equipped with a special internal switch
that turns the rotating brush off whenever the vacuum cleaner is in the upright
position.
How to operate _ 11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to operate
usiNG accessories
Put the cleaner in the upright position to stop the brush-roll rotating, or simply
press the brush-roll on/off button.
Push down and pull out the handle, while pressing the pipe release button.
Remove the hose and handle from the slot.
The air flow is automatically inverted by the smart inverter.
Choose any of the handy accessories or use the hose alone.
Simply push the attachment firmly into the end of the extension wand.
To remove tool, twist and pull apart gently.
cleaning tools
Attachment tools can be used to clean furniture,
drapes, stairs, or in corners.
Place the vacuum on the floor with handle in the upright
position while using attachment tools.
12_ How to operate
Download from Www.Somanuals.com. All Manuals Search And Download.
LoNGreacH cLeaNiNG
The stretch hose is extended for long reach and upstairs.
Do not put the your Vacuum cleaner above you on the stairs when cleaning the
stairs.
Ensure it is positioned against up the bottom stairs.
How to operate _ 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintain tools and filter
check rotating Floor Brush and drive Belt
You should check your vacuum cleaner’s rotating floor brush and drive belt
regularly for wear or damage. You should also clean the brush and brush ends
of strings, hair, and carpet fibers. These can wrap around the brush and hamper
its ability to effectively clean your carpet. Also remove any debris that has
accumulated under the brush cover.
1. Unplug cleaner from electrical outlet.
2. Recline handle and turn vacuum cleaner over so
bottom side is up.
3. Remove the six screws as shown with a phillips head
screwdriver. Lift the brush cover off.
4. Grasp rotating floor brush at both ends and lift.
5. Clean strings, hair and other debris from rotating
floor brush, paying particular attention to brush ends.
6. Clean strings, hair and other debris from motor pulley
and drive belt areas.
7. Check drive belt carefully for wear, cuts or stressed
areas.
8. Check air passageway for obstructions. Remove
debris from this area.
Rotating drum-brush could cause the fringe of a rug to become tangled within
cleaner.
CAUTION
Use caution and turn off the drum-brush when vacuuming throw rugs with
fringe.
replace drive Belt
1. Unplug cleaner from electrical outlet.
2. With rotating floor brush removed from vacuum
cleaner grasp old drive belt and remove from motor
pulley. Discard old drive belt.
3. Place new drive belt over motor pulley and stretch
other end over rotating floor brush in the space
between the bristles.
4. Place ends of rotating floor brush down into slots
on sides as shown.
5. Turn rotating floor brush by hand several times in
the direction of motor pulley. If properly installed,
drive belt will center itself on rotating brush crown.
6. Reposition brush cover and screws. Tighten
screws securely.
14_ Maintain tools and filter
Download from Www.Somanuals.com. All Manuals Search And Download.
smart inverter
1. Unplug cleaner from electrical outlet.
2. Remove 3 screws at back of the vacuum cleaner show with a screwdriver.
3. Clean up the smart inverter inside.
4. Refit hose inverter (Check the position carefully)
5. Refit smart inverter and 3 screws.(When refit the smart inverter while slide inverter
pushing down)
6. Slide fully connected hose with the inverter(Check the position carefully)
7. Pull the brush hose on the back of brush and slide fully connected brush hose with
inverter.
Silde inverter
Hose inverter
Maintain tools and filter _ 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintain tools and filter
carton contents
brushbar Replacement
1. Remove the tool from the pipe, and turn
upside down.
Slide the switch to unlock position and remove
bottom plate.
2. Remove brushbar and discard.
3. Inspect belt to ensure that it is in good
condition. If broken or cracked, please replace.
(See below for details.)
4. With the curved ends facing down, slide end
plates of brushbar into slots on the tool.
5. To replace bottom plate, insert the four tabs on
edge of bottom plate into slots on front of tool.
Pivot bottom plate down and snap closed.
belt Replacement
1. Grasp turbine and pull firmly to remove.
2. Remove belt from turbine pulley. Replace with
new belt.
3. With flat sides of turbine retainers pointing
down, slide retainers into grooves in tool
housing and snap into place.
4. Replace brushbar and bottom plate.
Cleaning brushbar
Cut off pet hairs or threads surrounding brush by
using scissors.
16_ Maintain tools and filter
Download from Www.Somanuals.com. All Manuals Search And Download.
eMPtYiNG tHe dust BiN
To remove dust bin from vacuum cleaner, push the dust bin release button.
Hold dust bin and push down bin release empty button to empty.
Turn grille cyclone for easy dust removal.
Ensure bin is empty and close dust bin base.
When emptying any vacuum cleaner it is difficult to avoid exposure to dust.
To minimize this risk, please ensure that you encase the dust pot in a large
bag to empty it and close the bag as tightly as possible round the pot.
Remove the pot and close the bag as tightly and quickly as possible and
dispose of this immediately. It is advisable to wear disposable gloves and
a face mask while emptying the cleaner. If at all possible, ask a non allergy
sufferer to empty the dust pot when required.
Maintain tools and filter _ 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintain tools and filter
cleaning the dust bin & re-assembling the dust bin
Push down cyclone release button.
Turn grille cyclone for clean.
Cleaning the clean bin.
Rinse with cold water only.
Ensure dust bin and grille is completely dry before refitting Fit cyclone assembly
inside the bin Line up the front and rear guides and push down secure.
Push down bin release empty button and refit the grille cyclone Close dust bin base.
1
2
3
4
5
6
7
8
Check the assembling dust bin base and body grille.
Ensure that dust bin assembly is positioned properly.
18_ Maintain tools and filter
Download from Www.Somanuals.com. All Manuals Search And Download.
WasHiNG Your FiLter
For safety, Turn power off and unplug before checking for blockages.
Remove dust bin from Vacuum cleaner.
Unlock the cover filter.
Lift filter release catch and remove filter.
Separate sponge filter and case filter.
Wash filter and case in cold water only.
Repeat until water runs clear.
Dry for at least 12 hours.
Ensure filter is completely dry before Refitting onto the vacuum cleaner.
Sponge filter
Cover filter
Micro filter
Case filter
The HEPA filter should be replaced every 6 months.
D
Check the assembling order when Re-assembling the filter.
Cover filter
Case fiter
(Sponge filter+micro filter)
HEPA filter
Body grille
Maintain tools and filter_ 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble shooting
Check this list of possible problems and solutions before bring your vacuum to a service
center
problem
possible solution
Vacuum cleaner won’t turn on
• Not properly plugged into electrical outlet.
• Vacuum cleaner not turned on.
• Plug unit in firmly
• Press on/off button
• No electricity in the electrical outlet.
• Check fuse or breaker
Vacuum cleaner won’t pick up / loss of suction
• Circuit breaker tripped
• Agitator brush rolls worn
• Dust bin full
• Incorrect carpet height setting
• Broken belt
• Reset circuit breaker
• Replace brush rolls
• Dust bin release empty button to empty
• Set carpet height adjustment to appropriate
• Replace belt
• One or both filters are clogged
• Remove, clean and replace filters
dust escaping from the vacuum cleaner
• Dust bin full
• Empty dust bin
• Dust bin not installed
• HEPA filter clogged
• Dust bin not properly installed
• Review dust bin replacement
• Replace HEPA filter
• Ensure that dust bin assembly is positioned
properly
• Filter assembly not assembled properly
• Pre-filter clogged
• Ensure that filter assembly is positioned
properly.
• Clean pre-filter
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
COUNTRy
AUSTRALIA
HONG KONG
MALAYSIA
CAll
1300 362 603
OR vIsIT Us ONlINe AT
3698-4698
1800-88-9999
SINGAPORE
1800-SAMSUNG (7267864)
Code No. DJ68-00264B (REV 0.1)
Download from Www.Somanuals.com. All Manuals Search And Download.
|