YP-T5
SAMSUNG ELECTRONICS CANADA, INC.
HEADQUARTERS
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
TEL: 1-905-542-3535
SERVICE DIVISION
7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3
1-800-SAMSUNG (1-800-726-7864)
- MP3 and WMA playback
- Removable Storage Device
- Encoding function
- FM reception
- 3D sound
- Upgradable
- 12 hours of continuous play
AH68-01567S (Rev 0.0)
Download from Www.Somanuals.com. All Manuals Search And Download.
S a fe t y In s t ru c t io n s
Earphones
Read and understand all the instructions to avoid injury to yourself and damage to the equipment.
Follow Traffic Safety Instructions
Do not expose to extreme
temperatures (above 95°F or below
23°F). Do not expose to moisture.
Do not let any foreign matter spill
into the device.
Do not apply excessive pressure
to the device.
●
Do not use the earphones while driving an automobile or riding a bicycle.
It’s not only dangerous, but also against the law.
● An accident may result if you turn up the volume of the earphones too high while walking
down the street, especially when crossing at intersections.
Protect your ears
● Do not turn the volume up too high.
Doctors warn against prolonged exposure to high volumes.
Remove batteries when the device
is left unused for a long period of
time.
Do not expose to chemicals such
as benzene and thinners.
Do not place heavy objects on top
of the device.
● Stop using the device or turn the volume down if you get ringing in your ears.
Ambient operating conditions
● Ambient temperature : 5°C ~ 35°C (41°F ~ 95°F)
● Humidity : 10% ~ 75%
Do not expose to direct sunlight
or heat sources.
Do not store in dusty areas.
Do not try to disassemble and
repair the device yourself.
Environmental Information
● Follow local guidelines for waste disposal when discarding packaging, batteries,and old
electronic appliances.
● yepp packaging uses cardboard, polyethylene etc., and does not use
any unnecessary materials.
● Please be aware that we claim no responsibility for damage from data loss
due to breakdown, repair or other causes.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 & WMA Playback
FM Reception
●
MP3 is an MPEG1 Layer3 audio format.
●
Listening to an FM program is made easy with Auto Search and Frequency
Memory functions.
●
WMA is a Microsoft Windows Media audio format.
3D Surround Sound
Rem ovable Storage Device
●
The 3D surround feature adds spaciousness to the sound.
●
You can easily copy and paste files to the yepp player using Windows Explorer.
Upgradable
Encoding Function
●
You can upgrade the built-in programs when available.
Add functions, CODEC, etc. Please check the yepp home page
●
You can make an MP3 file from an external source using the ENC jack
on the main unit.
●
You can also convert an FM radio program into an MP3 file in real time.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Ac c e s s o rie s
12-Hour Continuous Play
Earphones
AH30-00064D
USB cable
AH39-00589A
User manual
AH68-01475A
Carrying case
AH61-01618A
Player
●
This unit uses one AAA/LR03 alkaline battery. Operation can last up to 12hours.
Actual playing time may vary according to the type and capacity of the battery.
Voice Recording Function
●
You can make high quality voice recordings.
One Battery
Direct Connect
USB Adaptor
AH39-00590A
Neck Strap
AH61-01619A
Installation CD
AH80-00063D
Line In Cable
AH39-00567A
(1.5V AAA/LR03 type)
4301-000115
Model
YP-T5 H
128MB
YP-T5 V
256MB
YP-T5 X
512MB
Built-in memory
● The capacity of the useable built-in memory is less than indicated as the internal firmware
uses a part of the memory as well.
● Design of accessories is subject to change, for the purposes of improvement, without notice.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo c a t io n o f Co n t ro ls (ye p p )
Display
Neck strap Hook
Track Number indicator
Play/Stop/Pause indicator
Display
MENU, Navigation button/Joystick
Move to Track/Speed Search/
Volume Button
Equalizer, SRS indicator
Remaining Battery Power indicator
Bit rate indicator
Playtime indicator
Play mode indicator
Title (track & artist) indicator
Mode indicator
Loop Repeating Button
Play/Pause Button
Hold Switch
Recording Button
Microphone
Inserting a Battery
Slide the cover in the
1 direction of the arrow to open.
ENC Jack
N
Earphone Jack
Insert a battery to the right poles
2
+ , – and push-close the cover in the
direction the arrow as indicated.
USB Cable
Connection Port
Battery Cover
Note
●
Do not place heavy objects on the cover.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e c t in g t h e ye p p t o a P C
System
Before connecting yepp to PC, make sure to install
USB driver. If “Add New Hardware Wizard”appears,
press the [Cancel] button and install the USB driver.
Requirements.
The PC system must meet the
following specifications:
● Pentium 133MHz or greater.
● Windows 98 SE/ME/2000/XP.
● 40MB of available hard disk space
● CD-ROM drive.
Installing software
Insert the Installation CD into the CD-ROM drive.
(double speed or greater)
● USB port (1.1) supported.
● DirectX 8.0 or above.
Click [Next] in the series of windows that appear.
1
2
The picture shown below appears.
Select [yepp USB Driver]
Note
●
Install the operating system in
Administrator Account mode for Windows
2000 or XP. Otherwise, installation will not
be completed.
●
Windows ME, 2000 and XP can recognize
the driver without installing the provided
program. However, you must install the
program in order to format yepp and
upgrade firmware.
●
If the YP-T5 program has not been
installed in Windows 98, then it will not
communicate with your removable disk.
You must install the USB driver file first.
Continued...
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e c t in g t h e ye p p t o a P C
Connecting the yepp to a PC with a USB cable
How to check the USB driver
● Windows 98/ME:
Connect a USB cable to the USB port on the
computer.
3
Control Panel
Disk Drives
●
System
●
Device Manager
●
●
Samsung yepp YP-T5
Connect the other end of a USB cable to the USB cable
connection port on the bottom of the yepp, and press
4
● Windows 2000:
the
button on the main unit.
Control Panel
●
System
●
Hardware
●
Device Manager
●
Disk Drives
●
● If you disconnect the USB cable from your PC while
implementing a command or initializing during USB
driver installation, your PC may not function correctly.
Samsung yepp YP-T5 USB Device
● Windows XP:
Control Pane
Disk Drives
●
System
●
Hardware
●
Device Manage
●
The USB driver is installed with a message saying that
it is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
●
Samsung yepp YP-T5 USB Device
5
6
When the USB driver is not installed automatically,
refer to the next page.
7
Upon installation of the USB driver
"Samsung yepp YP-T5" will appear in the
[System Properties]
●
[Device Manager].
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n u a l In s t a lla t io n o f t h e US B Drive r
Go to “Downloading/Uploading files” on page 20 if the USB driver is in place.
Follow these steps if the USB driver is not in place :
When an error occurs during installation of the USB driver
Note
●
●
●
If you are using Windows 2000 and your version of Windows does not recognize the USB driver,
please download and install the latest service pack from windowsupdate.microsoft.com
Check the device manager.
1
The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
● Windows 98/ME:
Control Panel
● Windows 2000 (Professional):
Control Panel System Hardware
Device Manager
● Windows XP (Professional):
Control Panel System Hardware
Device Manager
●
System
●
Device Manager
If errors occur continuously when you install the USB driver,
reconnect the USB cable after rebooting your system.
●
●
●
●
After selecting the driver,
click on [Update Driver].
Select a compatible driver,
click on [Next] to finish.
4
5
●
●
Check if there is a device listed with an
exclamation point or a question mark
(displayed as unknown device or USB device).
2
3
Double click on the device listed with an exclamation
point or a question mark.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n u a l In s t a lla t io n o f t h e US B Drive r
In Windows 98
Click [Next] button in the series of windows that appear.
● You must reboot your computer to
complete the installation.
Note
USB driver location
[CD ROM]\setup\Drivers
●
You cannot use it as a removable disk in Windows 98 if the YP-T5 program is not installed.
Make sure to install the USB driver file first.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g t h e re m o va b le s t o ra g e
Disconnecting the USB cable
Downloading/Uploading files
After completing the file transmission, you must disconnect the cable in the following way:
Connect the yepp to your PC and turn it on.
1
2
3
Double-click on the green arrow in
1 the taskbar on the bottom right of
Open Windows Explorer on PC.
the window.
Select the file to save and drag-and-drop it into the removable disk icon.
(In numerical, alphabetical order)
When the [Hardware device stopped] message appears,
press the [OK] button and disconnect the USB cable.
2
Notice
●
The “WRITING/READING” message will appear during file
download or upload. Disconnecting the USB cable while
“WRITING/READING” is displayed may cause
malfunction of the unit.
N
●
The order of music files displayed in Windows Explorer
may differ from the play order on your device.
Note
●
The green arrow is not displayed on the Task Bar in Windows 98 system.
If “READY” message is shown in Display window, please disconnect the USB cable.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Us in g t h e re m o va b le s t o ra g e
In s t a llin g ye p p S t u d io
Formatting
Insert the Installation CD into CD-ROM drive.
Select [yepp Studio].
1
Select the removable disk
Press [Start] button after selecting
1icon and click the right mouse
2 FAT in file system menu.
button to select [Format].
● All saved files will be formatted.
● You can change the name of
removable disk by selecting
[Volume label].
Select language
2
Note
●
●
By formatting, all previously preset menus will be initialized.
Care must be taken as formatted files can not be recovered.
Continued...
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
In s t a llin g ye p p S t u d io
To View Help on yepp Studio
Click [Next] in the series of windows that appear.
Run yepp Studio and press F1.
3
● Help will appear.
● Please refer to Help for more information on how to use yepp Studio.
Move the arrow to the top of yepp Studio and right click on the mouse.
The following selection window will appear.
● Click on Help and the Help window will appear.
N
Note
●
Music recognition technology and related data are provided by Gracenote and Gracenote
CDDB® Music Recognition ServiceSM.
●
CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype,
the Gracenote CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
Note
●
The first time you use yepp Studio, enter the yepp’s serial number
when the [Register Serial Number] message appears.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
P la yin g Mu s ic a n d Tu rn in g Off t h e De vic e
Ad ju s t in g t h e Vo lu m e /Ho ld Fu n c t io n
Adjusting the Volume
Turning Power On and Off
● Power On : Press the
button to turn on the power.
Press the player’s
adjust the volume.
,
button during playback to
● Power Off : Press and hold the
button to turn off the power.
Playing Music
Note
Press the
button.
●
●
Volume ranges from 00 to 30.
● Playback starts.
Press once to adjust the volume by one step.
Press and hold to increase or decrease the volume in greater increments.
Pausing Music
HOLD Function
Press the
button to pause playback.
In Hold mode, all buttons are disabled.
● If no buttons are pressed within 10 seconds
(changes depending on settings),
the yepp automatically powers off.
Slide the
switch on the player in the
● While in Pause mode, briefly press
direction of the arrow.
again to resume playback.
● When the button is pressed, the “
HOLD!”
message will appear on the display.
Note
●
●
WMA files can only be played as music files with a compression rate of 48Kbps-192Kbps.
The power off time can be set in the menu. (refer to page 46)
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Re c o rd in g Vo ic e
MP 3 En c o d in g
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
To Record Voice
1
Press the REC button to start voice recording.
1
Press the REC button again to stop the recording and a
2 voice file is saved.
Press the REC button to start MP3 encoding.
2
3
● If the
button is pressed, encoding is paused and if the
button is pressed again,
the encoding resumes.
If the ENC button is pressed during encoding, the encoding stops and an
encoding file is created.
● Encoding is performed in order (L001, L002, etc.)
Note
and files are saved in the MP3 format after encoding.
●
Recording is performed in order (V001, V002, etc.)
and files are saved in the WAV format after recording.
Note
●
●
If the Memory is full, the Voice Recording is stopped automatically.
Voice Recording does not work in FM Mode or when the Line In cable is connected.
●
●
Bit Rates can be set within the range of 32Kbps~128Kbps.
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
Notice
●
●
●
Do not disconnect the Line cable during Encoding.
If the battery is not charged enough, encoding will not be done.
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
S e a rc h in g fo r Mu s ic /Vo ic e File s
Lis t e n in g t o FM Ra d io
First, press the
key to display the menu screen and select FM Radio.
To search for specific parts during play
Manual Search for a Frequency
Automatic Search for a Frequency
● Press and hold the joystick to the left or right during playback to search for
the part you want to listen to.
● Press and hold the joystick to the left or
right to search for and stop at frequencies
with reception.
● Press the joystick to the left or right
briefly to search manually for the frequency
you want.
● Release the joystick to resume play normally.
To change tracks during play
● Press the joystick to the
position briefly during playback to play the next track.
position briefly within 5 seconds after playback starts,
● Press the joystick to the
to move to and play the previous track. Press the joystick to the
five seconds to play the current track from the beginning.
position briefly after
Manual Storage of a Frequency
Automatic Storage of a Frequency
● After searching manually for the frequency you
● Press and hold the A●B button
want, press and hold the
button in the
while in FM Mode.
To change tracks when stopped
● Frequencies within the range of
88.0MHz to 108.0MHz are automatically
selected and stored.
centor to display the Save screen.
● Use
,
to select the number you want to
● Press the joystick to the left or right in stop mode to move
to the previous/next track.
assign to save the frequency and then press
the
button.
● Frequencies are automatically stored,
starting from 1.
Note
●
●
●
VBR(Variable Bit Rate) file: A file that constantly changes the compression rate according
to the type of sounds, such as their pitch, in the file.
In the case of a VBR file, you cannot move to and play the previous track even if you press the joystick
to the
position within 5 seconds after playback starts.
Note
Files that were downloaded in MP2 or MP1 and had their file extension changed to MP3 may not play.
Number of channels saved.
●
●
●
To exit from FM Mode press the
button in the center.
Mono (MO) or Stereo (ST) is automatically selected.
Up to 20 frequencies can be stored.
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Lis t e n in g t o FM Ra d io
FM En c o d in g
Searching Stored Frequencies
Press the REC button during FM reception.
1
2
● Encoding of the currently transmitted FM broadcast begins.
Press the
button in FM Mode.
1
2
●
PRESET screen will appear.
Use
,
to move to the frequency you want.
Press the REC button again.
●
●
A file is created and the encoding stops.
Files are saved in the order F001, F002, F003...and stop automatically when the memory is full.
Deleting Stored Frequencies
- After moving to the PRESET number you want to delete, press and hold the
button.
●
The saved PRESET number will be deleted.
Note
●
Press the
joystick in the PRESET screen to exit the PRESET mode.
32
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo o p Re p e a t in g
Us in g Na vig a t io n
You can easily search for files or switch modes using the Navigation function.
Starting Point
Ending Point
Press and hold the
button to move to Navigation mode.
1
While playing music files, press the
A●B button briefly at the beginning
of the loop you want to set.
Press the A●B button briefly
again to set the end of the loop.
A●B appears in the display.
A● appears in the display.
The loop is played repeatedly.
When the folder is in play or stop status.
When the file is in play or stop status.
Select the file or folder that you want to play.
2
3
●
●
●
: When moving to a higher-level folder.
●
: When moving to a lower-level folder.
,
:
When moving to a file or folder in the same directory.
: Move to the next folder down. When there is not a lower folder,
the selected file will be designated as part of the playlist.
Press the
button.
Note
●
●
The selected file will be played.
If you select a folder, all the files in the selected folder will be played.
● Press the A●B button briefly to cancel the loop.
Loop Repeat is automatically released if you Speed Search with the
●
,
buttons.
Note
●
Press and hold the
button in Navigation mode to exit the Navigation mode.
34
35
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g P la ylis t
S e t t in g u p MENU
Press the
Use
Press and hold the
button to switch to MENU mode.
to move and press the button briefly to select the menu you want.
button to exit the MENU mode.
Setting Playlist
,
- Move to the file you want in Navigation mode and press the
button.
●
●
The selected file will be marked.
To release the playlist setting,
move to the marked file in Navigation mode and press the
button again.
Playing Playlist
● Now playing : To check the track currently played.
● FM Radio : To listen to FM radio.
Press and hold the A●B button in Music mode.
1
2
●
The Playlist you set will be displayed.
● File : To delete or format files.
● Settings : To set the yepp functions.
Move to the file you want to play and press the
The selected file will be played.
button.
●
Note
●
In MENU mode, no input for 15 seconds will cancel the MENU mode.
Note
●
Select PLAYLIST in File Delete (see “Deleting”) on page 38 to release all the playlists you set.
36
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n a g in g File s
Deleting
Formatting
Select File in the MENU. (refer to “Setting up MENU”)
Select File in the MENU. (refer to “Setting up MENU”)
1
2
3
1
2
In File, select File Delete and the mode the target file is in.
Select Format in File.
●
Formatting is performed if CONFIRM is selected.
Use
,
to move to the file you want to delete, press the
button and
select CONFIRM.
Press the joystick to the
position briefly to exit the setting.
CANCEL
CONFI RM
Note
●
●
All files will be deleted when formatting the built-in memory.
It is recommended that formatting be carried out on a PC that has the provided program installed as
formatting in the Menu may take a long time.
38
39
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g t h e Ad va n c e d Fu n c t io n s
S e le c t in g t h e P la y m o d e
Select Playmode in Settings.
Settings
1
2
In Play mode, use
,
to move to the mode you want and
Select Settings in the MENU. (Refer to “MENU Mode”)
press the
button to select.
1
2
In Settings, use
press the
,
to move to the function you want and
button to select.
●
Use
to move to upper menu.
● Normal: To play all the tracks in order one time.
● Repeat one: To repeat one track.
● Repeat all: To repeat all tracks.
● Shuffle: To play tracks at random.
● Intro: To listen to the first part of all saved tracks for 10 seconds.
40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g t h e EQ m o d e
DIS P LAY
Select Display in Settings.
Select Sound in Settings.
1
2
Scroll Speed
● Use
,
to set the scroll speed.
In Sound, use
,
to move to the sound mode you want and press the
button.
● The setting range for the scroll speed,
● SRS (
): You will hear 3D Stereo sound.
which adjusts the speed of the track title flow, is 0 to 10.
● TruBass (
): This is a bass boost feature that adds fullness to the sound.
● WOW: This feature allows you to enjoy the SRS and Trubass features simultaneously.
● If you want bass boost, select DBB.
Time
● Play time: Displays the current play time
● Remain time: Displays the remaining play time
● Used size: Displays the size of memory used.
● Free size: Displays the remaining memory
Select User and set the Bass/Treble if you want to set the tone yourself,
apart from the specified tone.
3
●
Bass/Treble can be adjusted from 0 to 10 with
,
.
Note
●
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc..
Please adjust the volume to a suitable level, as the volume may increase in the SRS setting.
This unit supports sampling frequencies of 32KHz, 44.1KHz or 48KHz.
The SRS function is not set for voice recording files.
●
●
●
42
43
Download from Www.Somanuals.com. All Manuals Search And Download.
DIS P LAY
[ LCD color ]
Backlight
● Use
,
to select the LCD color you want,
[ Light Time - Jog ]
out of 7 colors.
● Use
,
to set the
Light-On time.
Green
Violet
Lilac
N
Red
N
N
Blue
N
N
● The setting range for Light-On Time is 0 to 10 seconds.
N
N
Orange
Random
Sky-Blue
● When set to On, the Light stays on continuously.
[ Light Time - LCD ]
Note
● Use
,
to set the LCD Light-Off time.
●
The light does not illuminate when the residual battery level is insufficient.
● The setting range for Light-On Time is 0 to 10 seconds.
● When set to On, the Light stays on continuously.
Contrast
● Use
,
to set the contrast.
● The setting range for the contrast, which adjusts the
brightness of the screen, is from 0 to 10.
44
45
Download from Www.Somanuals.com. All Manuals Search And Download.
P o w e r Off Tim e
ENCODE
Select Power off in Settings.
Select Encoding off in Settings.
Time
Bitrate
● Use
,
to set the Power-Off time.
● Use
,
to set the encoding bit rate you want.
● 0, 5, 10, 15 seconds and 1 minute are available for
power-off time.
If no key is pressed after play stops, the unit will
automatically turn off after the time you set.
● When encoding music into an MP3 file, you can select
one of the following bit rates: 32Kbps, 48Kbps, 64Kbps,
96Kbps and 128Kbps.
● If you set it to 0 seconds, it will not turn off automatically.
AutoSync Time
Sleep
● Use
,
to set the AutoSync Time.
● Use
,
to set the Sleep time.
● AutoSync Time is a function for separating and saving
MP3 files when there is no sound for a set time during
MP3 encoding.
● 30, 60, 90 and 120 minutes are available for sleep time,
and it will automatically turn off after the time you set.
● When set to OFF, the power does not turn off
● The setting range for the AutoSync Time is from
automatically.
2 to 5 seconds.
● If AutoSync Time is set to OFF, encoding keeps going even if there is no sound,
and then it is saved as one file.
Note
●
Auto Sync function can support from 64Kbps to 128Kbps.
46
47
Download from Www.Somanuals.com. All Manuals Search And Download.
WOW LEVEL
DEFAULT VOLUME
Select WOW level in Settings.
Select Default vol in Settings.
Adjusting SRS and TruBass LEVEL
Default vol
● If you select SRS or TruBass in the WOW level menu,
● Use
,
to set the default volume value.
you can adjust the SRS and TruBass level.
● It is possible to set the default volume to a value
between 0 and 25(MAX).
● Use
,
to select the level you want.
● The level for SRS and TruBass can each be set
If the power is turned on again after having adjusted the
volume above the default value, music is played at the
default volume.
within the range of 0 to 10.
● If the power is turned on again after the volume was set to
within the default value, the music is replayed at the
previously played volume.
WOW Optimum
● If you select WOW Optimum, it optimizes the SRS function
according to the device connected.
● Use
,
to select Speaker, Headphone, Earphone or
Carpack(car cassette adapter).
48
49
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU Ta b le
● Use the
key to move and select.
50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le s h o o t in g
The software doesn’t work
The buttons do not work.
●
Refer to the recommended PC specifications.
●
Check setting of Hold switch.
●
Remove the battery once and then insert it again.
yepp does not work and the LCD displays nothing.
The yepp keeps being turned off.
●
Check the battery capacity
● Check to see if the battery is inserted to the right poles ( + , – )
●
In Stop mode, the power is automatically turned off after ten seconds
(changes depending on settings).
●
Check to see if there are files saved in it. The yepp will be turned off if no files are saved in it
In PLAY mode, music is not played after pressing the
button
●
Check to see if MP3 or WMA files are saved in the built-in memory.
Check to see if the HOLD button is locked.
Something’s wrong with play time displayed during Play mode.
●
● “VBR SONG” message is displayed instead of play time while VBR
(Variable Bit Rate) file is playing.
Files cannot be downloaded.
●
Check to see if the driver is installed correctly in the computer.
LCD window is dark
●
●
●
Check the connection between yepp and computer.
Check and/or replace the battery, turn on the yepp's power.
Operating system limits the number of files you can save.
Please save your music files by creating a subfolder.
Check if the memory is full.
●
Check Contrast
●
Backlight does not work.
●
Check the backlight setup.
●
When the battery power is low, the backlight will go out.
52
53
Download from Www.Somanuals.com. All Manuals Search And Download.
S p e c ific a t io n s
S a m s u n g Lim it e d Wa rra n t y
S a m s u n g Ele c t ro n ic s Ca n a d a In c . (S ECA),
warrants that this product is free from defective m aterial and workm anship.
Model
Built-in Memory capacity
Voltage
YP-T5
SECA further warrants that if this product fails to operate properly within the
specified warranty period and the failure is due to im proper workm anship or
defective m aterial SECA will repair or replace the product at its option.
128MB(YP-T5 H), 256MB(YP-T5 V), 512MB(YP-T5 X)
1.5V X 1 (AAA/LR03 size alkaline battery)
lasts up to 12hours (Alkaline battery, MP3 128Kbps, Vol level 20)
0.91X2.13X0.91inch/0.85oz (without battery)
Plastic/Aluminum
Playing time
All warranty repairs m ust be perform ed by a SECA authorized service
centre. (The nam e and address of the location nearest you can be obtained by
calling toll free 1 -8 0 0 -7 2 6 -7 8 6 4 or visiting our web site at w w w .s a m s u n g .c a )
Dimensions/Weight
Case
Noise Ratio
80dB with 20KHz LPF
La b o u r
P a rt s
Earphones Jack Output Power
Output Frequency Range
Operating Temperature Range
FM Frequency
5mW(Max 10mW)/CH (16Ω)
20Hz~20KHz
o n e (1 ) ye a r (c a rry-in )
o n e (1 ) ye a r
On carry-in m odels, transportation to and from the service centre is the
custom er’s responsibility.
-5 ~ +35°C(23~95°F)
88.0 ~ 108.0 MHz
The original dated sales receipt m ust be retained by the custom er and
is the only acceptable proof of purchase. It m ust be presented to the
authorized service centre at the tim e service is requested.
FM Signal to Noise Ratio
FM T.H.D
45dB
1%
FM Useable Sensitiivity
File Support
10dB
Exc lu s io n s
This warranty does not cover dam age due to accident, fire flood and/or
other acts of God; m isuse, incorrect line voltage, im proper installation,
im proper or unauthorized repairs, com m ercial use, or dam age that occurs in
shipping. Exterior and interior finish, lam ps and glass are not covered under this
warranty. Custom er adjustm ents which are explained in the instruction m anual
are not covered under the term s of this warranty. This warranty will autom atical-
ly be voided for any unit found with a m issing or altered serial num ber. This war-
ranty is valid only on products purchased and used in Canada.
MPEG1/2/2.5 Layer3(8Kbps ~ 320Kbps, 8KHz ~ 48KHz)
WMA (48Kbps ~ 192Kbps, 8KHz ~ 48KHz)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|