DVD-V2500
Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a used, caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or been dropped.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Table of Contents
◆ Safety
■
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
◆ Feature Summary
■
■
■
Feature Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
7
8
Unpack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
◆ 1 - System Overview
■
■
■
■
■
■
Front Panel Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Insert Batteries into Remote. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the TV Buttons on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 12
◆ 2 - Getting Started
■
Basic Connections/Auto Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
◆ 3 - Basic Operation
■
■
■
■
Deck Control Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic DVD Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic VCR Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Basic TV Tuner Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
◆ 4 - System Setup
■
■
■
■
■
■
■
■
■
On-Screen Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Manual Clock Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Tuner Band Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Auto Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Channel Add/Delete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Auto Power Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Front Panel Dimmer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Table of Contents
◆ 5 - DVD Setup
■
■
■
■
■
■
■
■
■
■
Player Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Disc Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Audio Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Parental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Digital Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Dynamic Compression. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2X Scan Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TV Aspect Ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
◆ 6 - DVD Sound Setup
■
A/V Receiver Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
◆ 7 - DVD Operations
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Disc Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Screen Fit Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Title/Chapter/Time Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Angle View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3D Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
◆ 8 - Memory Stick
■
■
■
■
■
Memory Stick. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
DAM (Digital Audio Manager) Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Memory Stick Pull out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
DPM (Digital Photo Manager) Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Slide Show Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Photo View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Edit Photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
■
■
■
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Table of Contents
◆ 9 - VCR Playback
■
■
■
■
■
Special VCR Playback Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
S-VHS Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Variable Search System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
◆ 10 - VCR Recording
■
■
■
■
Basic Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Special Recording Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
One-Touch Recording (OTR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Record Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
◆ 11 - Timer Recording
■
How to Set a Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
◆ Appendix A - Advanced Connections
■
■
■
■
S-Video/Component Video Connections (for DVD) . . . . . . . . . . . . . . . . . . . . . . 61
Stereo Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Monitor TV Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Connecting Other Video Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
◆ Appendix B - Help
■
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Feature Summary
DVD+VCR Features
• Perfect compatibility to play back DVDs, VCDs, audio CDs, MP3 discs or VHS Tapes.
• Enjoy a DVD movie while recording a TV show to the VCR.
• Auto Setup instantly finds the time and runs channel search.
• RF inputs and outputs for all kinds of TVs available.
• Composite, S-Video, and Component video outputs.
• Universal remote provides the full operation on DVD+VCR.
• On-Screen Program (English/French/Spanish).
DVD Features
• 10-bit video digital to analog converter and 27MHz advanced digital filter.
• Playback of 96KHz/24-bit sources.
• DTS digital output for DTS-enhanced DVDs.
• Playback MP3 files from CD-ROM.
• Continued audio during 2x speed playback.
VCR Features
• Hi-Fi Stereo VCR.
• 4 heads for superior slow motion and stop action.
• Playback of S-VHS tapes at better than standard resolution.
• VISS Scan, Zero Return, Blank Search.
• 8-event/1 month timer recording.
• Time remaining counter, real time counter.
Note
*Discs which cannot be played with this player.
*Ability to play back may depend on recording
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
• SVC, CVD
conditions.
• DVD-R
• DVD+RW, -RW • Photo CD
• CD-RW
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
Unpack
When you unpack the DVD+VCR, please check the following list of items is included in the packing
case.
• DVD-VCR
• User’s Guide (AC68-01821A)
• Registration Card (AD68-00078A)
• RCA cable for Audio/Video connection (AC99-10500H)
• RF (Radio Frequency) Antenna Cable (AC39-42001J)
• Remote Control (AK59-00001A)
• 1.5V “AA” Batteries - 2EA (AC43-12002J)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Disc Types
(Logos)
Max.
Playing Time
Recording
Types
Disc Size
Characteristics
Single-sided
240 min.
Double-sided
480 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
DVD
5"
Audio
+
Video
Single-sided
80 min.
Double-sided
160 min.
31/2"
VIDEO-CD
AUDIO-CD
5"
74 min.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
Audio
+
Video
31/2"
20 min.
74 min.
20 min.
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
5"
Audio
31/2"
Disc Ma rk in g s
DIGITAL
SOUND
~
STEREO
NTSC
• Digital
• Stereo disc
• DTS disc
• MP3 disc
• MEMORY
STICK
• Play
Region
Number
• NTSC broadcast • Dolby
system in U.S.A,
Canada, Korea,
Japan, etc.
Audio disc
Digital disc
Pla y Re g io n N u m b e r
Both the DVD player and the discs are coded by region. These regional codes must
match in order for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Front Panel Overview
1
2
3
4
5
6
7
8
9
10 11 12 13
14
15 16 17
1
2
3
4
5
6
7
8
9
DVD DECK (p.14)
DVD OPEN/CLOSE (p.14)
VCR DECK (p.15)
12 PLAY/PAUSE (p.14, 15, 33, 58)
13 FAST-FORWARD/FWD (p.33, 54)
14 FRONT PANEL DISPLAY (p.10)
CHANNEL
/
(p.16)
RECORD (p.57)
15 LINE IN 2 COMPOSITE VIDEO JACK
16 LINE IN 2 LEFT AUDIO JACK
17 LINE IN 2 RIGHT AUDIO JACK
DVD-VCR SELECT (p.14)
VCR EJECT (p.15)
POWER (p.14)
MEMORY STICK (p.43)
10 STOP (p.33)
11 REWIND/REV (p.33, 54)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Rear Panel
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
RF ANTENNA INPUT
RF OUT TO TV
6
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
COMPONENT VIDEO OUT
LINE OUT TO TV (COMPOSITE)
LINE IN 1
7
8
9
DIGITAL AUDIO OUT(COAXIAL)
DIGITAL AUDIO OUT(OPTICAL)
VIDEO OUT SELECT SWITCH
* If 525P(480P) VIDEO OUT is selected, VIDEO
10 S-VIDEO OUT
and S-VIDEO will not work.
* If your TV supports progressive scan, follow
the TV User’s Manual’s instructions regarding
progressive scan setting in the menu system.
Front Panel Display
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
When the light is on DVD is working
DVD, SVCD, VCD, or CD is loaded
8
9
3D Sound is active
A DVD with a DTS soundtrack is loaded
The number to the right of the “TITLE” symbol is
the current title number
10 The next number to the “CHAP” displays the
current chapter showing.
4
The time, counter position, time remaining or
current deck status is displayed
11 The Hi-Fi track of a VHS tape is playing
(The current TV show or video is broadcast in
Stereo)
5
6
VHS is loaded
12 Timer Recording is in progress.
Clock hands is on when Timer Recording is in
progress
It also blinks when you pause VCR.
7
VCR is working
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Remote Control Overview
1
2
3
4
5
6
7
8
POWER (p.14)
ZOOM (p.36), TV MUTE (p.12)
0-9 (p.16)
100+(p.16)
MEMORY STICK (p.43)
VOLUME +/– (p.12)
DVD (p.14)
REWIND (p.33, 54)
SKIP BACK (p.33, 54)
STOP (p.33)
1
2
21
22
9
3
4
10 3D SOUND (p.38)
11 RECORD (p.57)
12 UP (p.16)
13 LEFT (p.16)
14 SETUP (p.16)
ENTER (p.16)
23
15 RETURN (p.16)
16 TITLE (p.35)
24
25
5
6
7
8
9
SPEED (p.59)
17 SCREEN FIT (p. 34)
18 SUBTITLE (p.37)
TIMER (p.60)
19 SHUTTLE DIAL (p.33)
20 JOG DIAL (p.33)
21 OPEN/CLOSE (p.14, 15)
22 TV/VCR (p.16)
23 AUDIO (p.38)
24 INPUT SEL. (p.57)
ANGLE (p.36)
26
27
28
29
10
11
30
12
13
31
14
32
33
25 CHANNEL
/
(p.12, 16)
(p.54)
15
TRACKING
/
26 VCR, TV SELECT (p.14)
27 FAST-FORWARD (p.33, 54)
SKIP NEXT (p.33, 54)
28 PLAY/PAUSE (p.14, 15)
29 CLEAR (p.40, 41)
30 DISC MENU (p.34)
31 RIGHT (p.16)
34
35
36
16
17
18
19
20
32 DOWN (p.16)
33 DISPLAY (p.35)
34 MODE (p.41)
REPEAT (p.39,54)
35 SLOW
36 MARK (p.40)
SEARCH (p.56)
Insert Batteries into Remote
• Remove the batter cover on the remote
• Insert two 1.5V “AA” batteries as shown, making sure of the correct
polarities(+/-)
• Slide the cover back onto remote.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Using the TV Buttons on the Remote Control
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1
2
3
Switch your television on.
1
Point the remote control towards the television.
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
Codes
Brand
Codes
SAMSUNG
SHARP
SONY
01, 14, 15, 23
02, 16, 22
03
LOEWE
ZENITH
LG
28
17
06, 08, 18
3
RCA
07, 29
09
12, 24
11
10
13
MAGNAVOX 04
TOSHIBA
PANASONIC
JVC
HITACHI
MITSUBISHI
NEWSAN
EMERSON
SANYO
DAEWOO
NOBLEX
21
05, 20
19
3
2
25
TELEFUNKEN 26
27
4
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
4
➢
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
☛
When you change the batteries in the remote control, you
must reprogram the code, following the same procedure.
You can then control the television using the following buttons.
5
Button
Function
POWER
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the required channel.
Used to toggle the sound on and off.
➀
INPUT SEL.
VOL + or –
CH ( or
➁
➂
)
➃
MUTE
➄
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
➢
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Basic Connections/Auto Setup
In this section, you will connect the DVD-VCR to your television
and run Auto Setup, which automatically searches for channels and
sets the player’s internal clock.
NOTES:
• See Appendix A for Advanced Connections.
1
• Standard RF or Line connection between DVD-V2500 & your TV
are required to run DVD+VCR setup menu, even if
you connect S-Video or Component Video Output
for a better picture quality.
From Antenna or Cable
1
2
Connect Antenna/Cable to DVD+VCR
Connect an external indoor/outdoor antenna or wall outlet antenna
cable to the Ant-In jack on the rear panel of DVD-V2500.
Connect DVD+VCR to TV
Choose one of the following methods to connect the DVD-VCR to your TV:
RF Connection
2
Connect the supplied RF antenna cable from the OUT (TO TV) jack
on the back panel of the DVD-VCR to your television’s Antenna Input.
2
To TV’s Antenna Input
Line Connection
Connect an RCA-type audio/video cable (red, white, yellow) from
the LINE OUT jacks on the back panel of the DVD–VCR to your
television’s Line In jacks. Use red for right audio, white for left
audio, and yellow for video.
NOTE: It is recommended that you use the Line Connection if your
TV is equipped with RCA jacks.
3
3
Plug In
Connect the DVD-VCR power cord to a standard 120V/60Hz wall
outlet. Don’t press any buttons on the DVD-VCR or remote during
auto setup. “AUTO” blinks while the DVD-VCR runs an auto setup
procedure, where it will automatically search for all active channels
and set the clock. When Auto setting has been completed, the front
panel displays the current time. If Auto Clock set is unable to find a
channel to set the clock, you can set the clock manually; See page
18.
4
Turn On DVD+VCR
Press the POWER button on the remote control or on the
DVD–VCR’s front panel.
5
6
Turn On TV
Press the POWER button on your TV.
Set TV to Channel 3, 4 or Line
Be sure to use the same channel you selected in Step 2. If you
used the Line Connection, set your TV to its Line Input.
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Deck Control Buttons
The DVD-VCR uses one set of controls to operate both decks. The
following buttons are helpful in successfully controlling each deck.
1
POWER Button
Press the POWER button on the remote control or front panel to
turn on the DVD-VCR.
1
2
DVD Button
Press the DVD button on the remote control or front panel when
you want to control the DVD deck.
•
The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3
4
VCR Button
Press the VCR button on the remote control or front panel when
you want to control the VCR deck.
4
•
The VCR indicator will light on the Front Panel Display to show
that the VHS deck is selected.
2
3
INPUT SEL. Button
Press the INPUT SEL. button repeatedly to cycle through all of
your input sources, including the Tuner (Ch##), Line 1 (rear AV
input), and Line 2 (front AV input).
•
Input Select is only available when the VCR deck is selected.
Basic DVD Operation
Follow the instructions below to playback a DVD.
1
2
Open the Disc Tray
Press the Open/Close button on your remote or front panel to both
power-on and open the tray.
1
1
Insert a Disc
Put a disc in the center of the tray, with the label-printed side facing
up.
3
4
Close the Disc Tray
Press the Open/Close button on your remote or front panel to close
the tray.
Play a DVD
Press the Play/Pause button on your remote or front panel.
• Most discs will start to playback as soon as the tray closes.
• If a DVD has a disc menu, the menu may pop up on TV screen.
4
4
5
Additional DVD Options
•
•
For advanced DVD Setup options, see pages 24~31.
For special DVD Playback features, see pages 33~42.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Basic VCR Operation
To play a videotape, simply insert it in the VHS deck and press the
Play button. Tapes without Record Safety Tabs can be set to play
automatically when inserted; see page 56.
1
2
Insert VHS Tape
Insert a standard VHS videotape into the VHS Deck.
•
Power will turn on automatically when you insert a videotape.
Play Tape
Press the ll (Play/Pause) button on the remote control or front
panel. If the tape is missing the Record Safety Tab and Auto Play
is turned on, the tape will begin to play automatically, see page 56.
3
4
Stop Playback
Press the
(Stop) button on the remote control or front panel.
■
Eject Tape
1
Press the OPEN/CLOSE button on the remote control or the
EJECT button on the front panel.
5
Additional VCR Options
•
•
•
For special VCR Playback features, see pages 54~56.
For VCR Recording features, see pages 57~60.
For Timer Recording features, see page 60.
3
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Basic TV Tuner Operations
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
1
TV/VCR
1
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
3
2
3
Channel Up/Down
Press to change to the next or previous channel.
0-9 Buttons
Press to select channels directly.
4
5
100+ Button
Press to select channels 100 and higher. First, press the 100+
button, then press the remaining digits using the 0-9 buttons.
2
Display
4
Press to display the channel you are watching.
•
Also works in DVD and VCR mode.
5
2
On-Screen Menu Navigation
The on-screen menu system allows you to set all functions for your
DVD-VCR. The following buttons are used to open and navigate
through the on-screen menu system.
1
SETUP Button
With the DVD in stop mode, press to access the DVD-VCR on-
screen menu system.
2
Up/Down and Left/Right
Moves menu selection cursor up, down, left and right to cycle
through menu options
The Setup Menu is the opening
screen of the on-screen menu
system
3
4
ENTER Button
Press to confirm settings in certain menus.
RETURN Button
Returns to the last menu viewed or exits the menu system.
2
2
2
1,3
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Menu Language
Follow these steps to change the on-screen menu language to
English, French or Spanish.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
1
Set “Language”
Using the Up and Down buttons, move the selection arrow to
“Language/Idioma/Langue,” then press the ENTER button.
3
Set menu Language
Move the selection bar to your desired Language, then press the
ENTER button.
English Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Manual Clock Set
If Auto Setup was unable to find a local TV station to set the DVD-
VCR’s internal clock, follow these instructions to set the date/time
manually.
NOTE: It is important to set the clock for accurate Timer
Recording.
1
2
Open “SETUP MENU”
1,3
With the DVD in stop mode, press the SETUP button.
Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTER to select.
3
4
Select “Clock”
Using the up and down buttons, move the selection cursor to
“Clock Set/Adjust,” then press ENTER to select.
Select “MANUAL”
Move the selection arrow to “MANUAL”, then press ENTER to turn
this feature “On.”
•
The “Set Clock Menu” will change as shown.
5
Set the Clock
Press LEFT/RIGHT to select each of the following options, then
press UP/DOWN to set each option:
CLOCK SET/ADJUST
• Set Hour – Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
Auto
Manual
• Set Day
– Set the day using the up and down buttons.
• Set Year – Set the year using the up and down buttons.
RETURN
ENTER
6
Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.
CLOCK SET/ADJUST
TIME
12:00AM
DATE YEAR
1/01
2002 TUE
RETURN
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Tuner Band Setting
This feature allows you to manually set the DVD-VCR’s tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
1
Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTER to select.
3
4
Select “Channel”
Using the up and down buttons, move the selection cursor to
“Channel”, then press ENTER to select.
Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
•
•
Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
CHANNEL SETUP
Ant/Cable:
[Cable TV]
Auto channel memory
Channel add/delete
RETURN
CHANNEL SETUP
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
RETURN
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Auto Channel Memory
Auto Channel Memory will automatically seek and store all active
channels in your area.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
1,3
“VCR Setup,” then press ENTER to select.
3
4
Select “Channel”
Using the up and down buttons, move the selection cursor to
“Channel”, then press ENTER to select.
Run “Auto channel memory”
Move the selection arrow to “Auto channel memory,” then press
ENTER to select.
•
•
The DVD-VCR will automatically search for all available
channels in the selected Tuner Band. This procedure may take
a few minutes to complete.
When finished, the lowest channel found will be displayed.
CHANNEL SETUP
Ant/Cable:
[CABLE TV]
Auto channel memory
Channel add/delete
RETURN
ENTER
Memorizing
CH 07
. . . . . please wait . . . . .
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Channel Add/Delete
Use this feature if Auto Channel Search missed a channel that you
would like to add, or added a channel you wish to remove.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
1,3
Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTER to select.
3
Select “Channel”
Using the up and down buttons, move the selection cursor to
“Channel”, then press ENTER to select.
4
5
Select “Channel add/delete”
Move the selection bar to “Channel add/delete,” then press ENTER
to select.
Select Channel to add/delete
Use the CH
/
buttons to tune in the channel number you wish
to add or remove.
CHANNEL SETUP
6
Select “CHANNEL ADD/DELETE”
Press right to add or press left to remove the channel from
your channel list.
Ant/Cable:
Auto channel memory
Channel add/delete
[CABLE TV]
•
Repeat steps 4 and 5 to add or remove additional channels.
RETURN
ENTER
CHANNEL ADD/DELETE
Select channel : [ 01]
and press
press
[
[
]
]
to ADD
to DELETE
RETURN
CH
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Auto Power Off
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Option”
Using the up and down buttons, move the selection cursor to
“Option,” then press ENTER to select.
1
3
Select “Auto Power Off”
Move the selection bar to “Option Setup”, then press right to
select from following options:
•
•
Off – Auto power off is disabled.
1Hr – DVD-VCR will auto shut off 1 hour after the last button is
pressed.
•
2Hr – DVD-VCR will auto shut off 2 hours after the last button is
pressed.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Front Panel Dimmer
You can set the Front Panel Display to be bright all the time, dim
all the time, dim during power off.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Option”
Using the up and down buttons, move the selection cursor to
“Option,” then press ENTER to select.
3
Set “Panel Display”
Move the selection bar to “Panel Display,” then press right to select
from the following options:
•
Auto dim– Front Panel Display will dim automatically during
power off.
•
•
Dim – Front Panel Display will be dim all the time.
Bright – Front Panel Display will be bright all the time.
RF Output Channel
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
3
4
5
Select “Option”
Using the up and down buttons, move the selection cursor to
“Option” then press ENTER to select.
1
Select “RF Output Channel”
Move the selection bar to “RF Output Channel”, then press right
to change.
Change “RF Output Channel”
Press Return to change. A message will appear on your TV.
Then press ENTER to change.
Change “TV Channel”
A message will appear on your TV. When the message disappears,
change your TV to channel 3 or 4 to match the RF output channel
of the player.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Player Menu Language
Follow these steps to choose preferred language for player menus.
The DVD-VCR will automatically default to the language you
choose if it is available on a given DVD.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Language”
Using the up and down buttons, move the selection cursor to
“Language,” then press ENTER to select.
3
4
Select “Player Menu”
Move the selection bar to “Player Menu,” then press ENTER to
select.
Set “Player Menu Language” Preference
Move the Selection bar to your preferred language for
“DVD Player Meun” disc menus, then press ENTER to select.
Disc Menu Language
Follow these steps to choose your preferred language for DVD disc
menus. The DVD-VCR will automatically default to the language
you choose if it is available on a given DVD.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Language”
Using the up and down buttons, move the selection cursor to
“Language,” then press ENTER to select.
3
4
Select “Disc Menu”
Move the selection bar to “Disc Menu,” then press ENTER to select.
Set “Disc Menu Language” Preference
Move the selection bar to your preferred language for DVD disc
menus, then press ENTER to select.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Audio Language
Follow these steps to choose your preferred language for DVD
audio soundtracks. The DVD-VCR will automatically default to the
language you choose if it is available on a given DVD.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Language”
Using the up and down buttons, move the selection cursor to
“Language,” then press ENTER to select.
3
4
Select “Audio”
Move the selection bar to “Audio,” then press ENTER to select.
Set “Audio Language” Preference
Move the selection bar to your preferred language for DVD audio
soundtracks, then press ENTER to select.
Subtitle Language
Follow these steps to choose your preferred language for DVD
subtitles. The DVD-VCR will automatically default to the language
you choose if it is available on a given DVD.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Language”
Using the up and down buttons, move the selection cursor to
“Language,” then press ENTER to select.
3
4
Select “Subtitle”
Move the selection bar to “Subtitle,” then press ENTER to select.
Set “Subtitle Language” Preference
Move the selection bar to your preferred language for DVD
subtitles, then press ENTER to select.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Parental
Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
• If you try to play a DVD that exceeds the selected rating, an error
message will appear.
• Not all discs are rated.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “Parental”
Using the up and down buttons, move the selection cursor to
“Parental,” then press ENTER to select.
3
Select “Use Password”
Move the selection arrow to “Use Password,” then press the
right/left button to select from the following options:
•
•
Off - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
On – Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTES:
•
The first time “Enter Password” is set to “On,” you will be
prompted to enter a password.
•
If the “Enter Password” screen appears, then “Re-enter
Password” has already been set to “Yes.” Please skip to Step 5.
4
Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote
control.
•
Write your password down, and keep it in a safe place in case
you need it to change your settings later.
5
6
Select “Rating Level”
Move the selection bar to “Rating Level,” then press ENTER to
select.
Change Rating Level
Use the up/down buttons to select one of the following ratings:
• Level 8 Adult
• Level 7
• Level 6
• Level 4
• Level 3
• Level 2
• Level 5
• Level 1 Kids Safe
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
• If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds.
1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Digital Output
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
PCM
Bitstream
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTER to select.
3
Set “Digital Output”
Move the selection bar to “Digital Output” then press the right/left
button to select from the following options:
•
PCM - To use your DVD/TV with an A/V receiver NOT equipped
with a Dolby Digital decoder.
•
Bitstream – To use your DVD/TV with an A/V receiver equipped
with a Dolby Digital decoder.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
DTS
If your A/V receiver is equipped with a DTS decoder, your DVD-
VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
On
Off
NOTE: Select “On” ONLY if you have connected a DTS-equipped
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
the DVD-VCR back panel.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTER to select.
3
Set “DTS”
Move the selection bar to “DTS,” then press right or left to select
from the following options:
• Off - To use your DVD/TV with an A/V receiver NOT equipped
with a DTS decoder.
• On – To use your DVD/TV with an A/V receiver equipped with a
DTS decoder.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Dynamic Compression
Dynamic Compression restrains the dynamic range of sound, i.e.
the difference between the calm and noisy passage of a DVD audio
track.
On
Off
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “DVD Setup”
Using the up/down and left/right buttons, move the selection cursor
to “DVD Setup,” then press ENTER to select.
3
Set “Dynamic Compression”
Move the selection bar to “Dynamic Compression,” then press
right or left to select from the following options:
•
On - The total dynamic range of the DVD soundtrack will be
compressed, so quiet passages will be louder and loud
passages will be softer.
•
Off – The original dynamic range will be preserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
2X Scan Audio
When you play DVD Disc at 2x play made you can turn Audio
on or off.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Off
On
Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTER to select.
3
Set “2x Scan Audio”
Move the selection bar to “2x Scan Audio,” then press right or left
button to select from the following options:
• Off - Turns 2x audio off.
Though 2x Scan Audio is ON in the SETUP MENU, no
sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
• On - Turns 2x audio on.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
TV Aspect Ratio
Set the aspect ratio (length x width) of your TV screen so the DVD
player will display movies at the appropriate size for your
television. Choose from standard, letterbox, or widescreen format.
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Wide
Letterbox
Pan-Scan
Select “DVD Setup”
Using the up and down buttons, move the selection cursor to “DVD
Setup,” then press ENTER to select.
3
Set “TV Aspect”
Move the selection bar to “TV Aspect”, then press the left or right
button to select from the following options:
•
•
Widescreen – This method allows you to view the full 16:9
picture on a widescreen television.
Letterbox – This method displays the full width of the
widescreen movie on a standard 4:3 television. As a result,
black bars will appear at the top and bottom of the screen.
Pan-Scan – The familiar way of watching DVD and VHS
movies, this method selectively crops (by panning and scanning
to keep the most important part of the picture visible) wide
screen movies to fit a standard 4:3 television screen.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
31
A/V Receiver Connections
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
•
If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
OR
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
1
Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your A/V Receiver.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Special Playback Features
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ll
(Play/Pause) button.
1
Still
Press the ll (Play/Pause) button on the remote control during
playback.
1
• The picture will pause and the audio will mute.
• To resume playback, press the ll (Play/Pause) button.
• If the player is left in Pause mode for 5 minutes, it will stop
automatically.
2
3
Frame Advance (Step)
While in Still or Play mode, rotate JOG DIAL on the remote control
to advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press ll (Play/Pause) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
2
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (
l
/
l
) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, rotate shuttle ring on the remote
3
3
control and, press the Forward/Back (
/
) buttons on the
remote control or front panel to visually search forward/backward at
2X - 4X - 8X - 16X - 32X - 128X speed. Press ll (Play/Pause)
button to resume normal speed.
4
Slow Motion
During playback, press the ll (Play/Pause) button to Still the
image. Press and hold Forward/Back buttons on the Remote
control.
3
• Press and hold the Forward button( ) on the remote and
front panel to increase or decrease the speed from normall
playback to 1/8, 1/4, or 1/2 speed.
• Audio is muted during slow motion playback.
• Shuttle ring on the remote control rotere the shuttle riug on
the remote control to activate slow motion playback.
Press the ll (Play/Pause) button to resume normal playback.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ll
(Play/Pause) button.
5
• Press the
(Stop) button twice to completely stop playback.
■
The next time you press ll (Play/Pause), the disc will start over
from the beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Disc Menu Navigation
Many DVDs feature their own menu systems, where you can select
Titles, Chapters, Audio Tracks, Subtitles, and special disc features,
such as movie trailers, and information on the cast. Use these
buttons to make selections in the Disc menus.
2
1
2
2
1
2
DISC MENU Button
Press to access the DVD’s Disc menu, if applicable.
2
Press
,
or
,
to navigate through DVD’s Disc menu
options.
• Press up, down, left and right to highlight menu choices.
3
4
ENTER Button
3
Press to make your selections in the Disc menu.
TITLE Button
Press to access the DVD’s Title menu, if applicable.
4
Screen Fit Playback
1
SCREEN FIT Button
During play, press SCREEN FIT button on the remote control.
• Allows you to eliminate the black bars in the top and bottom of
the screen when a DVD movie is playing.
• Screen Fit will work when the Zoom mode is active.
(you can not remove the black bars on the screen) However,
Zoom mode will work when Screen Fit is active.
➢
• Various aspect ratios are available only in multiple
screen format discs.
• This function does not work when a DVD has been
recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated
due to their aspect ratio.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Title/Chapter/Time Selection
If you press the DISPLAY button during DVD playback, you can
view the current Title, Chapter/Track, and counter position. You
can also use the Display screen as a fast way to choose a title,
chapter/track, or playing time.
1
1
2
View the Display
Press the DISPLAY button on the remote control during DVD/CD
playback.
Select Title
Press the up/down and left/right buttons to select Title, then press
ENTER to change among all available titles on the disc.
• The “TITLE” icon light will appear on the Front Panel Display.
3
4
Select Chapter or Track
Press the up/down and left/right buttons to select Chapter or Track,
then press ENTER to change among all available Chapters/Tracks
on the disc.
• The “CHAP” icon light will appear on the Front Panel Display,
followed by the current title number, hours, minutes, and
seconds.
Select Counter Position
Press the up/down and left/right buttons to select the counter
position indicator, then use the number buttons (0-9) to enter the
desired counter position in the format HH:MM:SS (H = Hours, M =
Minutes, S = Seconds).
Then press ENTER to enter the desired counter position.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Zoom
2 or 4 times magnification is available while you watch a DVD.
1
2
Open Zoom Magnifying Glass
During Playback or STILL mode, press the ZOOM button to display
the “Magnifying Glass icon” on the screen.
1
Position Magnifying Glass
Use the
,
,
,
buttons to move the magnifying glass to any
position on the screen you want to zoom.
3
Zoom In
Press the ENTER button repeatedly to zoom in at 2X - 4X - 2X -
and normal magnification.
Angle View
Some DVD Movies provide you with various camera
angle views on the same scene while they are playing.
To activate the feature press the Angle Button.
1
1
2
3
Check for the Angle Icon
Press the Angle button, you’ll see the Angle Icon when watching a
DVD with multi Angles available.
View Angle Menu Options
When the Angle Icon comes up on the screen press the Angle
button to see the Angle menu.
Select an Angle option
Press the up/down buttons to select a camera angle you wish to
see.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Subtitle
Many DVDs provide subtitles in one or more languages. The
SUBTITLE button provides a shortcut to view and select these
options.
1
1
2
Open Subtitle Menu
During playback, press the SUBTITLE button.
Set Subtitle Language
Press the left/right buttons to select among all available subtitle
languages.
•
Subtitle languages are often represented by abbreviations.
3
Activate Subtitles
Press the up/down buttons to turn subtitles On or Off.
• The default subtitle setting is Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Audio
Many DVDs provide multiple language and audio setup options,
such as Dolby Digital 5.1, Dolby Pro Logic, or LPCM 2 Channel
audio. The AUDIO button provides a shortcut to view and select
among all available options for a given disc.
1
2
Open the Audio Menu
1
During playback, press the AUDIO button on the remote control.
Select DVD Audio Track
Press the left/right buttons to select the desired language/audio
setup on the DVD.
• Languages are represented by abbreviations; i.e. “ESP” for
“español.”
3D Sound
3D Audio is an enhanced audio mode that creates the illusion of
Surround Sound with only two speakers.
1
1
2
Open 3D Sound Menu
During playback of a DVD, press the 3D SOUND button on the
remote control.
Set 3D Sound
Press the up/down buttons to set “3D Sound” On or Off, then press
the 3D SOUND button to confirm your selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Repeat Chapter/Title
You can repeat a single chapter, or repeat a complete title.
1
Open Repeat Menu
In Play mode, press the REPEAT button to open the Repeat menu.
• The current Repeat Mode will highlighted.
1
2
Select “Chapter”
Press the left/right buttons to select “Chapter”.
• “Chapter” will highlight when Chapter Repeat is selected.
3
4
Repeat Chapter
Press the ENTER button to repeat the current chapter/track.
Select “Title”
Press the left/right buttons to select “Title”.
• “Title” will highlight when Title Repeat is selected.
5
Repeat Title
Press the ENTER button to repeat the title.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Bookmarks
You can insert up to three Bookmarks on your DVDs, so you can
jump quickly to your favorite scene or song.
1
2
Open Bookmark Menu
During playback, press the MARK button on the remote control.
The “Mark” header will appear on the screen.
1
Select Bookmark Placeholder
Press the left/right buttons to move to one of the three bookmark
placeholders (- - -).
• The selected placeholder will be highlighted.
3
4
Set the Bookmark
Play the DVD to the scene you want to bookmark, then press the
ENTER button. The placeholder will change to a number (1, 2 or
3).
• You can continue setting up to three bookmarks.
• When finished, press the MARK button to exit.
• Depending on the disc, the bookmark function may not work.
Play Bookmark
• During playback, press the MARK button on the remote control.
• Press the left/right buttons to move to a previously set bookmark.
• Press the Play/Pause button to play the bookmark.
• Press the CLEAR button to cancel the bookmark.
• Press the MARK button again to exit the Bookmark menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Programmed Playback
Programmed Playback lets you set a custom order for playback of
chapters/tracks on a DVD or CD.
1
2
Open Playback Mode Menu
While in Stop mode, press the MODE button.
1
Select “PROGRAM”
Using the left/right buttons, move the selection bar to “PROGRAM”
then press ENTER to select.
3
4
Select Chapter/Track
Press the up/down and left/right buttons to select the first
chapter/track in your revised playback list, then press the ENTER
button.
Program Playback Order
Use the up/down and left/right buttons to select the remaining
chapters/tracks, pressing Enter after each.
• Press the CLEAR button to change selections.
5
Play Revised Order
Press the ll (Play/Pause) button. The disc will play back in the
custom programmed order.
• While in playback mode, press the CLEAR button on the remote
control to cancel Programmed Play.
Random Playback
DVD Random Playback lets the DVD-VCR set a random order for
playback of chapters/tracks on a DVD or CD.
1
2
Open Playback Mode Menu
In Stop mode, press the MODE button.
Select “RANDOM”
Using the left/right buttons, move the selection arrow to “Random
On,” then press ENTER to select.
•
Press the “Play” button
The disc will playback automatically in random order.
3
Cancel Random Play
Press the CLEAR button on the remote control to cancel Random
Play.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
MP3 Playback
MP3 is a popular music format which allows you to compress
music files up to 1/12 of their original size while retaining near CD
quality sound. Your DVD-VCR can playback MP3 files burned onto
a CD-R disc.
1
Insert Disc
Insert a CD-R with MP3 files into the DVD deck.
•
The MP3 main menu will appear after a few seconds and the
first song on the disc will begin playing.
2
Select Folder
Press the up/down buttons to select the folder which contains the
MP3 files you want to hear, then press Enter to select.
•
•
If there are more than 8 folders on the disc, press RETURN to
view additional folders.
If there are no folders on the CD-R, skip to Step 3.
3
4
5
Select MP3 File
Press the up/down buttons to select the desired MP3 file.
•
If there are more than 10 MP3 files in the selected folder, press
the left/right buttons to view additional MP3 files.
•
Press the Return button to back up and select another folder.
Play MP3 File
Press the ENTER button on the remote control to play the selected
song.
•
While the song is playing, you can use the up/down buttons to
browse through other folders.
Stop MP3 Selection
Press the (Stop) button on the remote control to stop playback.
■
* To ensure proper playback of discs burned from MP3 files, make
sure the files have been recorded at a bit rate of at least 128
kbps.
* If there are any gaps (blank data) on multi-session discs, you
may experience playback problems.
* On discs that are recorded with a Variable Bit Rate(VBR), e.g.
from 32 to 320 kbps, the sound may cut in and out.
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Memory Stick
What is a Memory Stick?
"Memory Stick" is a new compact, portable and versatile IC (Integrated Circuit) recording medium with
a data capacity that exceeds a floppy disk.
"Memory Stick" is specially designed for digital data exchange among "Memory Stick" compatible
devices.
Because it is removable, the "Memory Stick" can also be used for external data storage.
There are two types of "Memory Sticks".
One is the regular "Memory Stick" and the other is the "MagicGate Memory Stick" equipped with
"MagicGate" copyright protection technology.
"MagicGate" is a copyright protection technology that uses encryption.
1
2
MagicGate Memory Stick
Can be used for both copyright-protected and regular data.
Memory Stick
Can be used for regular data only.
➢
◆
MagicGate Memory Sticks with copyright-protected data cannot be used in this unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Memory Stick
Precautions on handling the "Memory Stick"
The Memory Stick works in the DVD MODE only.
1
Data can become corrupted in the following instances:
- When the "Memory Stick" is taken out or the power is turned off while using the DPM
(Digital Photo Manager) or DAM (Digital Audio Manager) function.
- When using the "Memory Stick" in a location subject to static electricity or electric noise.
2
3
4
5
6
7
8
9
Memory sticks can only be read in this unit, not written.
Do not attach any other material than the supplied label on the label space.
Attach the label so that it does not stick out from the proper attachment location.
When moving or storing the "Memory Stick", use the storage case.
Do not touch the "Memory Stick" connector with your finger or metallic objects.
Do not bend, drop or apply strong shock to the "Memory Stick."
Do not disassemble or modify the "Memory Stick."
Do not allow the "Memory Stick" to get wet.
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Memory Stick
Precautions on attaching/removing the "Memory Stick"
1
If it is not fully inserted, until you hear an audible "click", the "Memory Stick" will not work.
2
If you inadvertently remove the "Memory Stick" or turn off the power while using the DPM (Digital Photo
Manager) or DAM (Digital Audio Manager) function, the recorded data may become corrupted.
3
To remove the "Memory Stick" during operation, see page 48 .
To format the "Memory Stick"
1
2
3
4
5
Do not format the "Memory Stick" using your computer. If you format the "Memory Stick" using the
computer, you cannot use it with "Memory Stick"compatible devices.
If you need to format the "Memory Stick," use a "Memory Stick" compatible device (If formatted, all data
previously recorded on the "Memory Stick" will be erased.)
If you use a "Memory Stick" that has been initialized using a computer or initialize a "Memory Stick"
attached to a camera using USB connection, further operation is not guaranteed.
Be careful not to optimize the "Memory Stick" from a computer running a Windows operating system.
The life of the "Memory Stick" will be shortened.
Do not compress the data recorded on the "Memory Stick."
A compressed file cannot be played back on this unit.
Software Compatibility
1
Depending on the type of application software used, the file size of a still image may become larger when it
is opened.
2
3
Depending on the type of application software used, only the first frame (thumbnail) of the clip motion file
may be displayed.
An image file that has been modified using an image processing software may not open if it is converted into
a different file format to play back with this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Memory Stick
Memory Stick functions applicable to DPM and DAM
Item
DPM (Digital Photo Manager)
DAM (Digital Audio Manager)
JPEG Image ( .jpg)
MP3 Music File ( .mp3)
*
File Format
*
1. All files in JPEG format that have less than 1600 x
1200 resolution can be played back with DPM.
(JPEG files smaller than 1.5MB can be viewed
with Photo View.)
- No limit to file size
File Size
2. For JPEG data without thumbnail information,
"Thumbnail not available" will be displayed in The
Thumbnail View, however, they can still be played
back in Photo View.
1. Still image files with ".jpg" extension that have
been recorded with a digital camcorder or digital
still camera equipped with Memory Stick functions
2. JPEG image files stored in Memory Stick using a
Memory Stick adaptor for PC
3. JPEG image files stored in CD-R/RW using CD
Writer on PC, have to be stored using one of
directory formats as follows (Capitalize all letters
of directory name):
All files in MP3 format that have been
downloaded from a PC or PDA to
Compatibility
Memory Stick ( .mp3)
*
1) \DCIM\<dir>\ .jpg
*
2) \PREVIEWS\<dir>\ .jpg
*
3) \IMAGES\<dir>\ .jpg
*
4) \ .jpg
*
- The size of each <dir> cannot be over 50MB.
[ case 1), 2), 3) ]
- When storing files in root directory [ case 4) ],
the size of root directory also cannot be over
50MB.
Directories Supported
• Memory Stick DPM
MP3 music files recorded on Memory
Stick can be played back.
-DCIM\<dir>\ .jpg
• Picture CD DPM
(Compatible with Picture CD of Kodak, Fuji, Qss
(Noritus), and Konica)
However, although non-MP3 files are
also displayed on DAM, they cannot be
played back.
Main Functions
*
Download from Www.Somanuals.com. All Manuals Search And Download.
46
DAM (Digital Audio Manager) Playback
MP3 Playback
1
Press Stop if in play mode.
2
3
4
Press the M.STICK button on the remote and the screen
to the right will appear.
Insert the Memory Stick encoded with MP3 files into the
Memory Stick Slot.
Press the UP/DOWN buttons on the remote control to select
Digital Audio Manager, and then press the ENTER button.
•Your selection is highlighted with yellow borders.
1
2
3
4
5
5
6
Use the UP/DOWN buttons to select the desired song.
6
7
Press the ENTER button to start play.
• Press the MENU button to return to the Start menu.
8
- If the PLAY button is pressed during the playback of an
MP3 file, the song will start from the beginning again.
- If the SKIP button is pressed during the playback of an
MP3 file,the next song will be played.
Screen Configuration
1. FOLDER UP: Use to move “up” a folder when you have multiple folders.
2. PLAYLIST: Shows the playlist.
3. INFO: Shows information about the Selected song being
played.
4. EXIT: Takes you to the Start menu.
5. Shows brief information about the selected song.
6. The title of the song currently playing
7. Shows a list of MP3 files and folders found in the memory stick.
8. Shows the title and playback time of the currently playing song in the scroll
box.
• lf the REPEAT button is pressed, the following displays will
appear:
-
-
-
If the REPEAT button is pressed, all MP3 files in a given folder will be
played back repeatedly in the order they are listed under that folder.
: If the REPEAT button is pressed once again, the Shuffle function is
activated. (All MP3 songs in a list are played once in random order.)
: If the REPEAT button is pressed yet once again, the Continuous
Shuffle function is activated. (All MP3 songs in a list are played in
random order.)
- If the REPEAT button is pressed still yet once again, the Repeat
function is deactivated.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Memory Stick Pull out
1
If using DPM (Digital Photo Manager) or DAM (Digital Audio
Manager), move to Exit, and then press the
ENTER button to exit to Disc Menu.
2
3
4
Move to the "STOP MEMORY STICK" function at the bottom
of the menu and then press the ENTER button.
When the "PLEASE REMOVE MEMORY STICK" message
appears on the top of the menu, remove the Memory Stick.
If the above sequence is not followed and the Memory Stick
is inadvertently removed or the power is turned off, the data
recorded on the Memory Stick may become corrupted.
DPM (Digital Photo Manager) Playback
View Photo Album (Memory Stick)
1
2
Press Stop if in play mode.
Press the M.STICK button on the remote and the screen to the
right will appear.
3
4
Insert the Memory Stick/Photo CD containing JPEG files into the
Memory Stick Slot.
1
Press the UP/DOWN buttons on the remote control to select
DIGITAL PHOTO MANAGER, and then press the ENTER button.
2
•Your selection is highlighted with yellow borders.
5
6
JPEG files in the Memory Stick/Photo CD will be displayed on the
screen in the order of their recording.
3
4
Use the UP/DOWN/LEFT/RIGHT buttons to select the image you
want, and then press the ENTER button to display it in full view on
the TV screen, or use the UP/DOWN/LEFT/RIGHT buttons to
select SLIDE SHOW and then press the ENTER button to begin
the slide show. Slides will be displayed in order for a few seconds
at a time.
5
➢
•
The Auto Power Off function does not work while any
DPM function is active.
Download from Www.Somanuals.com. All Manuals Search And Download.
48
DPM (Digital Photo Manager) Playback
View Photo Album (Photo CD)
1
Insert the Memory Photo CD containing JPEG files into the DVD
TRAY slot.
2
3
The Photo CD will be auto play, and then the screen to the vight
will appear.
Press the UP/DOWN buttons on the remote control to select
DIGITAL PHOTO MANAGER, and then press the ENTER button.
1
•Your selection is highlighted with yellow borders.
2
4
5
JPEG files in the Photo CD will be displayed on the screen in the
order of their recording.
3
4
Use the UP/DOWN/LEFT/RIGHT buttons to select the image you
want, and then press the ENTER button to display it in full view on
the TV screen, or use the UP/DOWN/LEFT/RIGHT buttons to
select SLIDE SHOW press ENTER, and the silde show will begin.
Slides will be displayed in order for a few seconds at a time.
5
Screen Configuration
1
2
3
EXIT: Takes you to the Start menu.
SLIDE SHOW : Begins the slide show.
PAGE : Highlight the PAGE menu item and use
LEFT/RIGHT buttons to move to the next page of
thumbnails.
4
5
ROLL: Allows navigation when there are multiple directories
below ‘/DCIM’ of Memory Stick. (See page 46)
Photo lnformation.
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Slide Show
1
2
Use the LEFT/RIGHT buttons on the remote control to select Slide Show.
• Your selection is highlighted with yellow borders.
Press the ENTER button and the Slide Show will begin.
• To execute any function or option, be sure to press
the ENTER button after selecting the menu item you want.
• If there is no input for 5 seconds, the Slide Show menu will
disappear, and the slide show will begin.
• To view the Slide Show menu, press the UP/DOWN/
LEFT/RIGHT button on the remote control. The slide show will
stop and the menu will be displayed.
• Select the PLAY menu item to resume.
Menu Description
• ALBUM : Takes you back to the Photo Album.
• TIMER: Indicates the delay between images in a slide show.
• REPEAT : If ON is selected, the slide show will repeat indefinitely.
• SET ORDER: Use to change the order of images in a slide show.
• PLAY: Begins the slide show.
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Slide Show Order
1
Use the LEFT/RIGHT buttons to select Slide Show and
press ENTER.
2
3
Use the LEFT/RIGHT buttons to select Set Order and press
ENTER.
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
select the image you want to move, and then press the ENTER
button.
• Your selection is highlighted with yellow borders.
4
5
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
select the location you want to move the image to, and then press
the ENTER button.
• Source location is indicated with yellow borders.
Destination location is indicated with green borders.
After moving the images to another location, you can begin the
slide show by choosing START SHOW.
• For those images you don't want to include in the
slide show, select the image from the Slide Show Order screen,
and then press the CLEAR button.
➢
◆ Slide Show order will reset when you turn player off.
Menu Description
• ALBUM: Takes you to Photo Album.
• UNDO: Restores the image you moved most recently to its
original location.
• RESET: Restores all the images to their original locations.
• START SHOW: Begins the slide show.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Photo View
1
2
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
select the desired image from the Photo Album screen, and then
press the ENTER button.
• The selected image will appear on the TV screen.
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
move to the menu item you want, and then press the ENTER
button.
• If there is no input for 5 seconds, the Photo View menu wil
disappear. To view the menu again, press the
UP/DOWN/LEFT/RIGHT button.
Menu Description
• ALBUM: Takes you to Photo Album.
• EDIT: You can apply various effects to the selected image.
This is only for viewing, the edited image cannot be saved.
• SLIDE SHOW: Begins the slide show.
• ROTATE: Each time the ENTER button is pressed, the image will
rotate clockwise 90 degrees.
• ZOOM: Each time the ENTER button is pressed, the image will
enlarge up to 6X Normal --> 2X --> 4X ---> 6X --> Normal
• PAN: Press the ENTER button followed by the UP/ DOWN/ LEFT or
RIGHT button to move the image in the direction of the arrow.
• PHOTO 1 OF 11 : When the Photo menu item is highlighted, the
LEFT/RIGHT button move to the next
previous images.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Edit Photo
1
2
From the Photo View screen, use the
UP/DOWN/LEFT/RIGHT buttons to select EDIT, and then press
the ENTER button.
• The Edit Photo menu appears.
Use the UP/DOWN/LEFT/RIGHT buttons on the remote control to
move to the menu item you want, and then press the ENTER
button.
• If there is no input for 5 seconds, the Edit Photo menu will
disappear. To view the menu again, press the
UP/DOWN/LEFT/RIGHT button.
Menu Description
• ALBUM : Takes you back to the Photo Album.
• FLIP: Shows the mirror image.
• FILTERS 1234: You can apply various effects to the selected image.
1. Black and white filter.
2. Sepia (brown) filter.
3. Image negative filter.
4. Color negative filter.
- To restore the image to its original state, select RESET from
the menu, and then press the ENTER button.
• COLOR R +- G + - B + -
Adjust Red, Green and Blue color balances each time ENTER is
pressed.
• SOFTEN 123: Highlight 1 of 3 desired effects: 1) softens
edges, 2) blurs the image and 3) creates an
impressionist painting effect.
• RESET: Restores the image to its original state before the
change was made.
• DONE: Returns you to the Photo View screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Special VCR Playback Features
While a videotape is playing, you can enjoy a variety of special
playback features, including Still, Frame Advance, Skip, Repeat, and
more. Press the Play button again to resume normal playback.
PLAY
1
2
3
Still
From Play mode, press Play/Pause to still a single frame.
0:00:00 SP
Frame Advance
From still mode, press JOG DIAL to advance to the next frame.
Press the DISPLAY button to see the
current status of the VCR deck, as well
as the tape counter position and
record speed.
Cue/Review
From Play mode, press F.Forward ( ) or Rewind ( ) to
cue/review at two speeds:
•
Picture Search — Press and release to advance the tape
forward or backward at 5 times normal speed.
Jet Search — Press and hold to advance the tape forward or
backward at 7 times normal speed.
•
3
3
4
5
Repeat
From Play mode, press Repeat to review the last 5 seconds of tape
(SP mode).
Shuttle
From Play mode, Shuttle >> gradually increases the cue speed
from Double-Speed playback to Picture Search to Jet Search.
Shuttle << gradually slows down the tape, then goes into Slow
mode, Still mode, Reverse Picture Search and Reverse Jet Search.
Tracking
The Tracking adjustment removes the white lines that sometimes
appear during playback because of slight differences in recording
decks. The TRK button will automatically align the recorded tracks
with the playback heads to solve this problem. You may also set
tracking manually.
1
1
Adjust Tracking Manually
During playback, press the TRK
the white lines from the picture.
1
or TRK
buttons to remove
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Auto Play
If you want your videotapes to play automatically when you insert
them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety Tab will
play automatically when inserted.
1
2
Open the “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
Select “VCR Setup”
Using the up/down and left/right buttons, move the selection arrow
to “VCR Setup,” then press ENTER to select.
3
Select “Auto Play”
Move the selection arrow to “Auto Play,” then press right to select
from the following options:
•
On - The VCR will automatically begin playing a video tape
when it is inserted, as long as the safety tab of the cassette
has been removed.
•
Off - Auto play is disabled.
4
5
Tape Length
Press the left button to select the video cassette length.
This information is usually printed on the tape box. The menu
cycles through: T120, T160 or T180. Once the type of cassette is
set, the VCR can display the amount of time remaining on the tape
when you press the DISPLAY button.
Auto Repeat
In the VCR Setup “Auto Repeat” sets the VCR to play a tape
repeatedly [unless a tape control is activated (stop, fast forward or
rewind)].
S-VHS Playback
The DVD-VCR allows you to playback high quality S-VHS tapes.
1
2
Insert a S-VHS Tape
Insert an S-VHS tape into the VCR deck.
Start Playback
Press Play/Pause on the remote control to begin playback of the
S-VHS tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Variable Search System
Press the SEARCH button to display the search screen in the stop
mode. When a program is recorded, the starting point is given an
Index mark for easy location. However, the VHS Index Search
System (VISS) cannot recognize index marks made by old VCRs. If
the VCR has trouble finding a mark, it is probably because the
cassette was recorded on a VCR without VISS. If you want to index
two programs in a row, set your VCR to stop, then start recording
each program. Pause has no effect on index marks.
Scan and play:
press [ ] or [ ]
Go to [0:00:00]:
Press [
]
]
End search:
Press [
0:00:00 SP
1
Scan and play
Use scan and play when you don’t know exactly where a program
is located on a cassette tape.
• Press right arrow for forward scan or left arrow for reverse scan.
• The display will show “Scan and Play”.
• When an index mark is found, the VCR plays for about five
seconds.
• Press the PLAY button to view that program.
If you don’t press PLAY, the VCR automatically searches for the
next index, or until the end of the tape is reached.
2
3
Go to 0:00:00 stop
Use this feature when you want to search for the 0:00:00 counter
position on a cassette. Press the CLEAR button at the point on the
tape where you want to set the counter to 0:00:00. Later, while a
cassette is stopped, press the up arrow button. The VCR will
rewind or fast forward, searching for the 0:00:00 counter position,
and then automatically stop at that position.
End search
Use this feature when you want to search for a blank position to
record a program on a cassette. While a cassette is stopped, press
down arrow button. The VCR will fast forward, searching for a
blank position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end search, the tape
will be ejected.
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Basic Recording
You can record a TV show in progress by inserting a blank tape and
pressing the REC button. You can even add time in 30-minute
increments up to 4 hours by pressing the REC button repeatedly;
see page 49.
NOTE: Be sure you videotape has a Record Safety Tab. If the tab
is missing, you can cover the opening with a small piece of
tape. Warning: Do not cover this opening unless you are
sure you want to record over the tape.
Before You Begin...
• Power on the DVD-VCR
• Power on the TV
• Set the TV to channel 3 or 4 .
2
1
2
Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the entire program.
To change the Recording Speed, see page 49.
3
Select a Channel to Record
Use the 0–9 buttons or the Channel Up/Down arrow buttons to
select the desired channel, or press the INPUT SEL. button to
select Line 1 or 2 if recording from an external device connected to
the front or rear Line inputs, respectively.
1
3
Start Recording
Press the REC button on the remote control or front panel.
For options while recording is in progress, see “Special Recording
Features” on the next page.
3
➢
Recording from the DVD player to the VCR is not
possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Special Recording Features
While a recording is in progress, you can watch a different channel,
watch a DVD, or add recording time in 30-minute increments.
1
2
Pause/Resume Recording
Press the ll (Play/Pause) button. Press REC again to resume.
1
2
Stop Recording
Press the STOP button.
3
4
5
Watch a Different Channel
Press the TV/VCR button on the remote to switch to your TV tuner,
then select a different channel on your television.
To Watch a DVD
Insert a DVD in the DVD deck and press Play. The output will
automatically change to the DVD.
3
Add Recording Time
See One-Touch Recording (OTR) on the next page.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
58
One-Touch Recording (OTR)
One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 4 hours at the touch of a button.
RECORD
1
2
Start Recording
Follow the instructions on page 57 to begin recording.
Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen Display and the
DVD-VCR will record for exactly 30 minutes.
0:30
1:00
1:30
2:00
3:00
4:00
Record length 0:30 07
3
Add Recording Time
Continue pressing REC to add recording time in 30 minute
increments up to 4 hours.
• The DVD-VCR stops recording automatically when the time has
elapsed.
SP
Record Speed
You can slow down the recording speed from SP to SLP in order to
fit six hours of programming on a T-120 tape.
1
2
Start Recording
Follow the Basic Recording instructions on page 57.
Set Record Speed
2
Press the SPEED button on the remote control to set the Record
Speed to one of the following options:
• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times
SP).
NOTE: The selected Record Speed will appear on the front panel
display and on-screen display.
Maximum Recording Time - SP vs. SLP
Tape Length
T-120
SP (Standard Play)
2 hrs
SLP (Super Long Play)
6 hrs
8 hrs
9 hrs
T-160
2hrs 40 mins
3 hrs
T-180
Download from Www.Somanuals.com. All Manuals Search And Download.
59
How to Set a Timer Recording
Insert a blank tape with a Record Safety Tab into the VCR deck.
The Timer Recording Feature allows you to program up to 8 events
at a time to record up to a month in advance.
Set the TV to channel 3 or 4.
1
Before You Begin...
•
•
Power on the DVD-VCR
Power on the TV
1
1
2
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button or press the
TIMER button.
Select “Program”
Using the up/down and left/right buttons, move the selection cursor
to “Set Timer Recording,” then press ENTER to select.
3
Select Channel Number
Press rightand up/down buttons to set the channel. Press the right
button to move to the next setting.
4
5
Set “Time/Date/Speed”
Repeat step 3 to set start time, end time, date and record speed.
Date can be set for one time, daily or weekly recording. See below.
Save “Timer Recording”
Press the RETURN button to complete programming of the timer
recording. Stop the VCR or turn the power off. The timer indicator
comes on the VCR. The VCR will automatically turn on and begin
recording at the time you set. To stop a timer recording, press the
POWER button or STOP button on the VCR.
CH
START END DATE SPD
6
7
Auto Speed Select
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_
_
_
_
_
_
_
_
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_
_
_
_
_
_
_
_
_ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
If you are not sure the tape is long enough for timer program
recording in the SP tape speed, set the recording tape speed to
“AUTO”. Recording starts in the SP tape speed. If the tape length is
not long enough, the tape speed automatically changes from SP to
SLP.
RETURN
Daily/Weekly Date Programming
Weekly [SUN’S~SAT’S]: You can record TV programs on the same
channel at the same time every week.
Daily [MO FR] : You can record TV programs on the same
channel at the same time every day Monday through Friday.
Download from Www.Somanuals.com. All Manuals Search And Download.
60
S-Video/Component Video Connections (for DVD)
The S-Video or Component Video connection is only for the DVD
player. The tuner and VCR will still be viewed through the RF or
line inputs.
1
Connect S-VIDEO OUT to TV
1
Connect an S-Video cable from the S-VIDEO OUT on the back
panel of the DVD-VCR to the S-Video Input on your television.
To S-Video Input on Your TV
2
Connect Component Video Out to TV
Connect a component video cable from the COMPONENT VIDEO
OUT (Y, Pb, Pr) on the back panel of the DVD-VCR to the
Component Video Input on your television.
2
3
Connect Audio Out (DVD only)
To Component Video Input
on Your TV
Connect RCA audio cables from the Left/Right Line Out jacks on
the back panel of the DVD/VCR to the Left/Right Audio Line In
jacks on your television.
• You must use these Line Out jacks when connecting the DVD-
VCR to your TV with the S-Video or Component Video Output.
3
To Left/Right Audio Inputs
on Your TV
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Stereo Connections
You can enjoy stereo sound when watching movies and TV shows by
connecting your DVD-VCR to your home stereo system or stereo
TV.
1
Connect DVD-VCR to Stereo
Connect RCA cables from the Line Out Left & Right Audio jacks on
the back panel of the DVD-VCR to the Auxiliary Inputs on your
stereo receiver. If you are using a stereo television, connect the
Video Output as well.
2
3
Set Stereo to Auxiliary Mode
Set your stereo receiver or television to “Aux” or “Tape,” whichever
selects the line input for your particular device.
Play a Tape
Insert a DVD or Hi-Fi stereo videotape in your system and adjust the
volume on your stereo receiver or television. You should hear the
audio through your stereo speakers.
• If you still do not hear stereo sound after inserting Hi-Fi stereo
video tape, press the Audio button until “Hi-Fi” appears on the
on-screen display.
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Monitor TV Connections
Monitor-style televisions offer improved sound and picture over
regular televisions because they receive the audio and video signals
directly from the DVD-VCR through the line inputs.
NOTE: A monitor television is not the same as a computer
monitor.
1
Connect VCR to Monitor TV
Connect RCA cables from the Audio/Video Line Out jacks on the
back panel of the DVD-VCR to the Audio/Video Line Inputs of your
monitor TV.
To Monitor TV Audio/Video Inputs
2
3
Set TV to Auxiliary Mode
Set your monitor TV to “Aux,” “Video,” or “Line.” Refer to your
monitor television owner’s manual for the correct setting.
Connection is Complete
NOTE: With this connection, the TV/VCR button has no effect. It is
as if the TV/VCR button were always set to VCR.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Connecting Other Video Equipment
You can connect a wide variety of audio/video equipment to your
DVD-VCR, including:
•
•
•
•
•
•
An additional VCR
Laser Disc Player
DVD Player
Camcorder
Satellite Receiver
Video Game
Since all of these devices use essentially the same connections, they
will be described together.
TV Audio/Video Outputs of
External Device
1
2
3
Connect Device to DVD-VCR
Connect RCA cables from the Audio and Video Line Outputs of
your external device to the Audio and Video Line Inputs on the
front or back panel of the DVD-VCR.
2,3
Watch Device
Play your external device, then press the Input Sel. button until the
playback from LINE1 (rear panel inputs) or LINE2 (front panel
inputs) appears on your TV screen.
3
Record Device
First, play your external device. Next, press the Input Sel. button
until the playback from LINE1 (rear panel inputs) or LINE2 (front
panel inputs) appears on your TV screen. Then press Record on
the VCR deck.
4
Timer Record From Device
Select LINE1 (L1) or LINE2 (L2) as your record source in the Timer
Record menu. All other Timer Record settings should be set in the
usual manner.
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Technical Specifications
AUDIO
2 Stereo audio inputs, RCA Connector, -8dbm, 47KW,
front and rear
Inputs
VIDEO
2 Composite video inputs, RCA Connector, 75W, 1Vp-p
Antenna or CATV Input, F-Connector, 75W
RF
AUDIO
1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KW
AUDIO (DVD only)
2 Digital audio outputs (1 optical, 1 coaxial)
1 Stereo audio outputs
VIDEO
1 Composite video output, RCA Connector, 75W, 1Vp-p
Outputs
VIDEO (DVD only)
1 S-Video output, S-Connector, 75W, Y=1.0Vp-p,
C=0.286Vp-p
1 Component video output, 75W, Y=1.0Vp-p, Pb=0.7Vp-p,
Pr=0.7Vp-p
RF
Channel 3 or 4
VIDEO SYSTEM
1/2-inch VHS system, 4 rotary head helical scanning;
FM azimuth luminance;chrominance: converted sub system
phase shift
AUDIO TRACK
Normal: 1 track; Hi-Fi: 2 track
PLAY/RECORD TIME
FF/REW TIME
HEADS
T-180 tape: SP 3 hours, SLP 9 hours
T-120 tape: <2 minutes
VCR
Video: DA 4 rotary
Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear)
Control:1 stationary head
Erase: 1 full track, 1 audio track
Less than 0.005% (Hi-Fi)
WOW & FLUTTER
FREQ. RESPONSE
DISC COMPATIBILITY
20-20,000 Hz (Hi-Fi)
CD, CD-R, CD-R/W
DVD-Video, CD-Digital Audio (5” and 3.5”), CD-Video, MP3
files on CD-ROM
DVD
FREQ. RESPONSE
S/N RATIO
96/48 kHz Sampling: 4 Hz-22kHz
110 dB
DYNAMIC RANGE
THD
96 dB
0.003 %
POWER REQUIREMENT
ENVIRONMENT
WEIGHT
120V AC, 60 Hz, 25 watts
41-104 F (5-40 C); 10%-75% humidity
13.8 lbs.
SYSTEM
Download from Www.Somanuals.com. All Manuals Search And Download.
65
SAMSUNG COMBINATION DVD & VCR
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be
performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to
SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the
purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNGís obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or
serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products,
equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied
and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING
ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO
USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER íS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
Download from Www.Somanuals.com. All Manuals Search And Download.
SAMSUNG ELECTRONICS AMERICA, INC.
HEADQUARTERS
105 Challenger Road, Ridgefield Park, N.J.
07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201, Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
AC68-01821A
Download from Www.Somanuals.com. All Manuals Search And Download.
|