HT-F4500
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Disc Storage & Management
• Holding Discs
Important Safety Instructions
-
Fingerprints or scratches on
a disc may reduce sound and picture
quality or cause skipping.
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
-
-
-
Avoid touching the surface of a disc where data has
been recorded.
Hold the disc by the edges so that fingerprints will
not get on the surface.
Read these instructions.
1.
Keep these instructions.
2.
Do not stick paper or tape on the disc.
Heed all warnings.
3.
• Cleaning Discs
Follow all instructions.
4.
-
If you get fingerprints or dirt on a disc,
Do not use this apparatus near water.
clean it with a mild detergent diluted in
water and wipe with a soft cloth.
5.
Clean only with a dry cloth.
6.
-
-
When cleaning, wipe gently from the
inside to the outside of the disc.
Do not block any ventilation openings. Install in
7.
accordance with the manufacturer’s instructions.
Disc Storage
Do not install near any heat sources such as
8.
Do not keep in direct sunlight.
Keep in a cool ventilated area.
radiators, heat registers, stoves, or other apparatus
(including AV receivers) that produce heat.
Keep in a clean protection jacket and store
Do not defeat the safety purpose of the polarized
9.
vertically.
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Handling Cautions
• Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases, on
the apparatus.
• To turn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
Protect the power cord from being walked on
10.
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
Only use attachments/accessories specified by the
11.
12.
manufacturer.
• Do not plug multiple electric devices into the same wall
socket. Overloading a socket can cause it to overheat,
resulting in a fire.
Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
• Before connecting other components to this product,
be sure to turn them off.
• If you move your product suddenly from a cold place
to a warm place, condensation may occur on the
operating parts and lens and cause abnormal disc
playback. If this occurs, unplug the product, wait for
two hours, and then connect the plug to the power
outlet. Then, insert the disc, and try to play back again.
Unplug this apparatus during lightning storms or
13.
14.
when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• If the product makes an abnormal noise or produces
a burning smell or smoke, turn off the power switch
immediately and disconnect the power plug from
the wall outlet. Then, contact the nearest customer
service center for technical assistance. Do not use the
product. Using the product as it is may cause a fire or
an electric shock.
|
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
• To turn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks. When
a prohibited use of an unauthorized copy is detected, a
message will be displayed and playback or copying will
be interrupted.
License
More information about Cinavia technology is provided
at the Cinavia Online Consumer Information Center
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.”
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2010 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
Manufactured under license
from Dolby Laboratories.
Dolby, Pro Logic, and
the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured
under license under
U.S. Patent Nos:
5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS-HD, the Symbol,
& DTS-HD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
- Open Source License Notice
In the case of using open source software, Open
Source Licenses are available on the product menu.
The terms HDMI and HDMI
High-Definition Multimedia
Using the 3D Function
Interface, and the HDMI
Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
DLNA®, the DLNA Logo
and DLNA CERTIFIED® are
• Some viewers may experience discomfort while viewing
3D TV such as dizziness, nausea, and headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
trademarks, service marks,
or certification marks of the Digital Living Network
Alliance.
• Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
• A responsible adult should frequently check on children
who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering
and disassembly are prohibited.
• Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
• Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or 3D
Active Glasses while moving around may cause you to
bump into objects, trip, and/or fall, and cause serious
injury.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks
of Blu-ray Disc Association.
|
4
English
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s HDMI
OUT port using a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
GETTING STARTED
6
7
9
Disk and Format Compatibility
Logos of Discs the product can play
Accessories
• The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
10 Front Panel
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D video, you
can not change the resolution to your preference.
10 Rear Panel
11 Remote Control
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not operate
properly in 3D play mode.
CONNECTIONS
12 Connecting the Speakers
• You must use a high-speed HDMI cable for proper
output of the 3D signal.
13 Connecting to a Network Router
14 Connecting to TV/External Devices
• Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if you
have a 46 inch screen, stay 138 inches (11.5 feet) from
the screen.
SETTINGS
15 The Initial Settings Procedure
16 The Home Screen
-
Place the 3D video screen at eye level for the best
3D picture.
16 Accessing the Settings Screen
17 Settings Menu Functions
19 Networks and the Internet
20 Upgrading Software
• When the product is connected to some 3D devices,
the 3D effect may not function properly.
• This product does not convert 2D content into 3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
the Blu-ray Disc Association.
21 Setting Up DLNA
MEDIA PLAY
22 Playing Files on a USB Device
22 Playing a Disc with User Recorded Content
23 Playing a Commercial Video Disc
23 Controlling Video Playback
Copyright
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.,Ltd.
24 Playing a Pre-Recorded Commercial Audio Disc
24 Controlling Music Playback
25 Controlling Photo Playback
26 Listening to Radio
26 Using the TV SOUND Button on the Remote
Control
NETWORK SERVICES
27 Using BD-LIVE™
27 Using DLNA
27 Apps
Contents
28 Using Netflix
29 Using Pandora
29 Using YouTube
30 The Other Apps
SAFETY INFORMATION
2
3
3
3
4
4
5
Warning
Precautions
Disc Storage & Management
Handling Cautions
License
APPENDIX
31 Additional Information
34 Troubleshooting
37 Specifications
Using the 3D Function
Copyright
|
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Disk and Format Compatibility
Disc Types and Contents Your Product Can Play
Media
VIDEO
Disc Type
Details
Blu-ray Disc
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
3D Blu-ray Disc
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have
been recorded and finalized, or a USB storage media containing MKV,
MP4 contents.
CD-RW/-R,
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing MP3 or WMA contents.
DVD-RW/-R,
MUSIC
PHOTO
BD-RE/-R
CD-RW/-R,
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing JPEG contents.
DVD-RW/-R,
BD-RE/-R
| NOTES |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.
\
\
\
\
Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30
Mbps.
Playback may not work for some types of discs, or when you use specific operations, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
\
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
\
Disc Types Your Product Cannot Play
• HD DVD
• DVD-RAM
• DVD-RW(VR mode)
• 3.9 GB DVD-R Disc for
Authoring.
• DVD-ROM/PD/MV-Disc, • Super Audio CD
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
etc
(except CD layer)
(CD-Gs play audio only,
not graphics.)
| NOTES |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow
specific or limited operation and provide only certain features during playback.
\
\
\
\
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 if you have questions or encounter
difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for
additional information on playback restrictions.
Some commercial discs and DVD discs purchased outside your region may not play on this product.
|
6
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Region Code
Logos of Discs the product can play
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
Blu-ray Disc
Dolby
BD-LIVE
DTS
Region
Disc Type
Area
Code
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
A
Blu-ray Disc
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
B
India, China, Russia, Central
and South Asia.
C
1
2
3
Java
3D Blu-ray Disc
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle
East, Egypt, South Africa,
Greenland
NTSC broadcast system
in U.S.A, Canada, Korea,
Japan
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
DVD-VIDEO
| NOTES |
Supported Formats
Music File Support
4
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
File
Audio
Container
Support Range
5
6
Extension
Codec
*.mp3
MP3
-
MP3
China
* Sampling rates
(in kHz) - 8, 11, 16,
22, 32, 44.1, 48
*.wma
WMA
WMA
* Bitrates - All
bitrates from 5kbps
to 384kbps
If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
\
|
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Picture File Support
File Extension
Type
JPEG
PNG
Resolution
*.jpg
*.jpeg
*.jpe
15360x8640
*.png
Video File Support
File Extension
Container
Video Codec
Audio Codec
Resolution
MP3, Dolby Digital, DTS,
MP4v3
*.avi
AVI
WMA, PCM
H.264 BP/MP/HP
VC-1 AP
*.mkv
*.wmv
*.mp4
MP3, Dolby Digital, DTS
MKV
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
WMV
WMA
AAC
(wmv9)
1920x1080
MP4 (mp4v)
MP4
PS
H.264 BP/MP/HP
MPEG1
MPEG2
*.mpg
MP1, 2
*.mpeg
Dolby Digital, DTS
H.264 BP/MP/HP
Limitations
-
Even when a file is encoded by a supported codec listed above, the file might not be played if its content has a
problem.
-
-
-
Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
Files having a higher bitrate/frame rate than standard may stutter during sound/video playback.
The Seek (skip) function is not available if the file’s index table is damaged.
Video decoder
-
-
-
Supports up to H.264 Level 4.1 and AVCHD
Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-
Does not support GMC 2 or higher
Audio decoder
-
-
-
Supports WMA 7, 8, 9 and STD
Does not support WMA sampling rate of 22050Hz mono.
AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bitrate: 320kbps
AVCHD (Advanced Video Codec High Definition)
• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.
• The AVCHD format is a high definition digital video camera format.
|
8
English
Download from Www.Somanuals.com. All Manuals Search And Download.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing
format.
• Some AVCHD discs use the “x.v.Color” format. This product can play back AVCHD discs that use “x.v.Color” format.
• “x.v.Color” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.
| NOTES |
Some AVCHD format discs may not play, depending on the recording conditions.
\
AVCHD format discs need to be finalized.
\
“x.v.Color” offers a wider color range than normal DVD camcorder discs.
\
Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
\
Notes on the USB connection
• Your product supports USB storage media, MP3 players, digital cameras, and USB card readers.
• The product does not support folder or file names longer than 128 characters.
• Some USB/External HDD/digital camera devices may not be compatible with the product.
• Your product supports the FAT 16, FAT 32, and NTFS files systems.
• Connect USB devices directly to the product’s USB port. Connecting through a USB cable may cause compatibility
problems.
• Inserting more than one memory device into a multi-card reader may cause the reader to operate improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a “loading” process.
• The bigger the image resolution, the longer the image takes to display.
• This product cannot play MP3 files with DRM (Digital Rights Management) downloaded from commercial sites.
• Your product only supports video that is under 30fps (frame rate).
• You must remove the USB storage device safely (by performing the “Safely Remove USB” function) to prevent
possible damage to the USB memory.
Press the HOME button to move to the home menu, press the YELLOW (C) button, and then press the E button.
• SAMSUNG is not responsible for any data file damage or data loss.
Accessories
Check for the supplied accessories below.
FUNCTION
V
O
L
U
M
E
MUTE
-
+
2
5
8
0
1
4
7
3
6
9
DISC MENU
TITLE MENU
POPUP
SUBTITLE
HOME
REPEAT
TOOLS
INFO
EXIT
RETURN
A
TUNER
M
E
M
O
R
Y
M
O
/
S
T
B
C
D
TV SOUND DSP/EQ
T
U
N
I
N
G
DOWN
UP
Power Cable
User Manual
FM Antenna
Remote Control (AH59-02533A)/
Batteries (AAA size) (4301-000116)
(AH68-02574A)
(AH42-00021A)
(3903-000598)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance.
|
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Front Panel
PLAY/PAUSE
ENTER
STOP
OPEN/CLOSE
VOLUME CONTROL
FUNCTION
5V 500mA
DISPLAY
DISC TRAY
USB HOST
POWER
REMOTE CONTROL
SENSOR
| NOTES |
To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
\
\
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
E button.
If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with
\
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.
Rear Panel
COOLING FAN
AUX IN
*FM ANT
HDMI OUT
I
POWER CORD
SPEAKER OUTPUT EXTERNAL DIGITAL AUDIO
LAN
CONNECTORS
IN (OPTICAL)
* Connecting the FM Antenna
Connect the FM antenna supplied to the FM ANTENNA Jack.
1.
2.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTES |
Ensure a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation.
\
\
Do not obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
|
10
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Tour of the Remote Control
Turn the product on and off.
Press to select Blu-ray's mode.
(BD/DVD, D. IN, AUX, etc.).
FUNCTION
MUTE
To open and close the disc tray.
VOLUME
Adjust the volume.
-
+
2
5
8
0
Cut off the sound temporarily.
1
4
3
6
Press numeric buttons to operate
options.
7
9
DISC MENU
TITLE MENU
Use to enter the Popup menu/
Title menu.
Press to view the disc menu.
POPUP
Press to skip backwards or forwards.
Press to play a disc.
Press to search backwards or
forwards.
Press to pause a disc.
Press to stop a disc.
SUBTITLE
HOME
REPEAT
Allows you to repeat a title,
chapter, track or disc.
Selects the disc subtitle language.
Press to move to the Home screen.
TOOLS
INFO
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Press to use the Tools menu.
Select on-screen menu items and
change menu value.
RETURN
A
EXIT
Press to exit the menu.
Use to set a preset radio frequency.
Return to the previous menu.
TUNER
MEMORY MO/ST
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
B
C
D
TV SOUND DSP/EQ
TUNING
Select MONO or STEREO for radio
broadcasts.
UP
DOWN
Audio signal can output to home
theater speaker or TV speaker.
(See page 26)
Search for active FM stations and to
change channels.
Select the desired DSP/EQ audio
mode.
Installing batteries in the Remote Control
Make sure to match the “+” and “–” ends of the batteries with the
diagram inside the compartment.
\
Battery size: AAA
Assuming typical TV usage, the batteries last for about one year.
The remote control can be used up to approximately 23 feet
(7 meters) from the product in a straight line.
\
\
|
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
under the TV stand.
Place it on a stand or cabinet shelf, or
Center
Subwoofer
Selecting the Listening Position
Front (R)
The listening position should be located
about 2.5 to 3 times the size of the TV's
screen from the TV. For example, if you
have a 46 inch screen, locate the listening
position 115 to 138 inches (9.6 to11.5
feet) from the screen.
Surround (R)
Product
Front (L)
Surround (L)
Place these speakers in front of your listening position, facing inwards (about 45°) toward
you. Place the front speakers so that their tweeters will be at the same height as your ear.
Align the front face of the front speakers with the front face of the center speaker or place
them slightly in front of the center speakers.
Front Speakers
Center Speaker
It is best to install the Center Speaker at the same height as the front speakers. You can
also install it directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough room, place
these speakers so they face each other. Position them about 2 to 3 feet (60 to 90cm) above
your ear, facing slightly downward.
Surround
Speakers
* Unlike the front and center speakers, the surround speakers are used mainly for sound
effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Speaker Components
(L)
(R)
(L)
(R)
FRONT
SURROUND
CENTER
SUBWOOFER
SPEAKER CABLE
|
12
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the
colored sticker on the bottom of each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the
speaker plugs to the colors of the speaker jacks.
Surround Speaker (R)
Surround Speaker (L)
Front Speaker (L)
SURROUND
FRONT
R
SURROUND
FRONT
L
Front Speaker (R)
R
L
SUBWOOFER
CENTER
Red
Black
SPEAKERS OUT
Center Speaker
U
I
Subwoofer
RUD
FT
RU
L
I
II
| CAUTION |
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall wherever you
want to hang a speaker, and then, using the hole in the rear of each speaker, carefully hang each speaker on a screw
or nail.
\
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
\
\
\
When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
\
| NOTES |
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
\
Connecting to a Network Router
I
RN
O
T
I
R
II
I
I
I
Broadband
modem
Broadband
service
Broadband
service
Or
Broadband modem (with integrated router)
Router
| NOTES |
Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software
update server. If this occurs, contact your Internet Service Provider (ISP) for more information.
DSL users, please use a router to make a network connection.
\
\
\
To use the DLNA function, you must connect a PC to the network as shown in the figure. The connection can be
wired or wireless.
|
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to TV/External Devices
AUX
IN
FM ANT
L
X
SN
F
SN
R
O
OPTICAL
R
DIGITAL
HDMI OUT
LAN
AUDIO IN
Method 1
Method 2
Red
R
External Devices
White
W
HDMI IN
OPTICAL OUT
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on
your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable
cCoonnnencteedc.tSineegptaogeE1x8 tinetrhnisamlaDnueavl aicndetshe section on ARC in your TV's user's manual for details.
To select the correct mode for an external device after you have connected the device, press the FUNCTION button.
Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX FM
ꢀ
ꢀ
ꢀ
Two methods of connecting external devices to your home theater are explained below.
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analog component. Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital Optical
Out jack of the external digital device using a digital optical cable.
Select the D. IN mode.
| NOTES |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
\
|
14
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
4:3 Letter Box - For older, standard screen, analog
TVs. Displays 4:3 pictures in full screen and 16:9
pictures in letter box format that retains the 16:9
aspect ratio but puts black bars above and below
the picture.
The Initial Settings Procedure
• The Home menu will not appear if you do not
configure the initial settings.
4:3 Pan-Scan - For older, standard screen, analog
TVs. Displays 4:3 pictures in full screen and 16:9
pictures in Pan-Scan format that fills the screen, but
cuts off the left and right sides of the picture and
enlarges the middle vertically.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
Turn on your TV after connecting the product, and
1.
The Network - Wired screen appears.
5 .
then turn on the product. When you turn on the
product for the first time, the product automatically
displays the Initial Settings Language screen.
-
-
If you have a network with dynamic IP addresses
- and most people do - select Auto, press the
button, and then go to Step 6.
E
If you have a network with static IP addresses,
we suggest you select Skip by pressing the
BLUE (D) button, and then go to "Configuring
Your Network Connection" on page 19 after you
have completed the initial setup. "Configuring
Your Network Connection" provides a full
explanation of how to configure your network
connection manually.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
-
If you have no network, select Skip by pressing
the BLUE (D) button. The Initial Settings
Complete screen appears, and then the Home
screen appears.
>
Move
"
Select
Press the ▲▼ buttons to select the desired
2.
3.
| NOTES |
language, and then press the E button.
If you skip network setup here or the setup does
\
Press the E button to start function setup.
not work correctly, you can go to "Configuring Your
Network Connection" on page 19 to set up the
product's network connection later.
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings".
Initial Settings I Network - Wired
Choose the method to configure Internet Protocol (IP).
Please make sure that the Ethernet cable is connected.
Start
Auto : Configure IP automatically.
Manual
Auto
a
Previous
"
Select
The TV Aspect screen appears. Press the ▲▼
4.
a
Previous
d
Skip
<
Move
"
Select
buttons to select a TV Aspect ratio, and then press
the
button.
E
The product verifies the network connection and
then connects to the network. When it is done,
press the E button. The Initial Settings Complete
screen appears, and then the Home screen
appears.
6.
You have four choices:
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format and
4:3 pictures (the old, standard format) in 4:3 pillar
box format with black bars on the left and right.
16:9 Full - For widescreen TVs. Displays widescreen
pictures in their original 16:9 format and expands 4:3
pictures to fill the 16:9 screen.
|
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
To select an option on the Home screen, move the
1.
Initial Settings I Network - Wired
cursor using the
buttons until it highlights
▲▼◄►
the option of your choice, and then press the
E
MAC Address (d0:66:7b:dc:28:fc)
IP Address, Subnet Mask, Gateway, DNS Server
Gateway Ping
button.
Internet Service Test
| NOTES |
Your network is operating properly.
To play or view video, photo, music files located on
\
If you still have a network problem, contact your network service provider.
your PC, you must connect your home theater and PC
to a home network and you must download, install,
and configure the DLNA software on your PC. (See
page 21.)
OK
"
Select
Accessing the Settings Screen
| NOTES |
If you want to display the Initial Setting screen again
and make changes, select the Reset option. (See
page 19)
\
Select Settings on the Home screen, and then
1.
press the
button. The Settings screen appears.
E
If you use an HDMI cable to connect the product to
an Anynet+ (HDMI-CEC)-compliant Samsung TV and
1.) You have set the Anynet+ (HDMI-CEC) feature to
ON in both the TV and the product and 2.) You have
set the TV to a language supported by the product,
the product will select that language as the preferred
language automatically.
\
Settings
Display
Audio
3D Settings
TV Aspect Ratio
BD Wise
:
:
:
:
:
:
:
16:9 Original
Off
Network
System
Language
Security
General
Support
Resolution
Auto
Movie Frame (24 Fs)
HDMI Color Format
HDMI Deep Color
Progressive Mode
Off
Auto
►
Off
Auto
The Home Screen
1
3
4
To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration below.
Videos
Photos
Music
Settings
2.
2
| NOTES |
If you leave the product in the stop mode for more
\
than 5 minutes without using it, a screen saver will
appears on your TV. If the product is left in the screen
saver mode for more than 20 minutes, the power
automatically turns off.
5
6
App 1
App 2
App 3
dView Devices
App 4
Enter
"
No Disc
a Change Device
Buttons on the Remote Control Used
Selects Photos.
Selects Videos.
Selects Music.
1
for the Settings Menu
SUBTITLE
HOME
REPEAT
2
3
4
5
1
2
TOOLS
INFO
Selects Settings.
Selects applications.
3
4
RETURN
EXIT
Displays the buttons you can use on the
remote to access functions.
6
HOME Button : Press to move to the Home
1
screen.
|
16
English
Download from Www.Somanuals.com. All Manuals Search And Download.
RETURN ( ) Button : Return to the previous
'
BD Wise is Samsung’s latest inter-
connectivity feature.
2
menu.
When you connect a Samsung
product and a Samsung TV
with BD Wise to each other via
HDMI, and BD Wise is on in
both the product and TV, the
product outputs video at the video
resolution and frame rate of the
Blu-ray/DVD Disc.
E (Enter) / DIRECTION Button :
• Press
item.
to move the cursor or select an
▲▼◄►
BD Wise
3
4
• Press the E button to activate the currently
selected item or confirm a setting.
EXIT Button : Press to exit the current menu.
| NOTES |
Lets you set the output resolution
of the HDMI video signal to
BD Wise, Auto, 1080p, 1080i,
720p, 480p. The number indicates
the number of lines of video
per frame. The i and p indicate
interlaced and progressive scan,
respectively. The more lines, the
higher quality.
The E button on the product's front panel can be
\
used for same purpose as the E button on the
remote control.
Resolution
Detailed Function Information
Each Settings function, menu item, and individual option
is explained in detail on-screen. To view an explanation,
use the
buttons to select the function, menu
▲▼◄►
item, or option.
Setting the Movie Frame (24 Fs)
feature to Auto lets the product
adjust its HDMI output to 24
The explanation will usually appear on the bottom of the
screen. A short description of each Settings function
starts on this page. Additional information on some of the
functions is also in the Appendix of this manual.
frames per second automatically
for improved picture quality if
attached to a 24Fs compatible TV.
Movie Frame
(24 Fs)
Settings Menu Functions
• You can enjoy the Movie Frame
(24 Fs) feature only on a TV
supporting this frame rate.
Display
Set up the 3D related functions.
• Movie Frame is only available
when the product is in the HDMI
1080i or 1080p output resolution
modes.
3
D Blu-ray Playback Mode:
Select whether to play a Blu-
ray Disc with 3D contents in 3D
Mode. If you move to the Home
or Smart Hub Home menu while
in 3D mode, the product will
switch to 2D automatically.
Lets you set the color space format
for the HDMI output to match
the capabilities of the connected
device (TV, monitor, etc).
HDMI Color
Format
3D Settings
S
creen Size: Enter the size of
Lets you set the product to output
video from the HDMI OUT jack with
deep color. Deep color provides
more accurate color reproduction
with greater color depth.
the TV attached to the product.
The product will automatically
adjust the 3D output to the
screen size of the TV.
HDMI Deep
Color
Lets you adjust the output of
the product to the screen size of
your TV. See page 15, Step 4 for
a description of the screen size
options.
Progressive
Mode
Lets you improve picture quality
when viewing DVDs.
TV Aspect
Ratio
Audio
Lets you adjust the following
speaker settings and turn the test
tone on and off so you can test the
speakers.
Speaker
Settings
|
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
When the product is attached to a
digital TV, lets you adjust the audio
delay so that the audio syncs with
the video. You can set the delay
between 0 and 300 milliseconds.
Lets you select the multi-channel
downmix method that is compatible
with your stereo system. You
can choose to have the product
downmix to normal stereo or to
surround compatible stereo.
Audio Sync
Distance: Lets you adjust the
relative distance of each speaker
from the listening position up to 30
feet. The farther the distance, the
louder the speaker will be.
Speaker
Settings
Downmixing
Mode
Test Tone: Lets you run the test
tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting
it to Off turns it off.
Network
For more information about Network
Settings and network functions, see
"Networks and the Internet" starting
on page 19.
Wired
Lets you select which speakers you
want active, either the TV's speakers
or the home theater's speakers.
Speaker
Network
Settings
Selection
Lets you direct the sound from the
TV to the home theater speakers.
Requires an HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
Lets you test the Internet Protocol
Network Test
setup to see if it is working correctly.
Lets you check whether a
Network
connection to the network and the
Internet have been established.
Status
• When Audio Return Channel is
set to Auto, the home theater
automatically selects either ARC
or optical input as the audio
source, depending on your
connections. If Audio Return
Channel is active, optical input
does not work.
Audio Return
Channel
BD-Live
Internet
Lets you allow or prohibit an Internet
connection for the BD-Live service.
Connection
System
Lets you re-run the Initial Settings
Initial Settings
Lets you set the Digital Output to
match the capabilities of the AV
receiver you’ve connected to the
product. For more details, please
refer to the digital output selection
table. (See page 33)
Lets you apply dynamic range
control to Dolby Digital, Dolby Digital
Plus, and Dolby TrueHD audio.
procedure. See page 15 for details.
Anynet+ is a convenient function
that offers linked operations with
other Samsung products that have
the Anynet+ feature and lets you
control those products with one
Samsung TV remote. To operate
this function, you must connect this
product to an Anynet+ Samsung TV
using a HDMI cable.
Lets you manage the contents you
downloaded through a Blu-ray disc
that supports the BD-Live service.
You can view the information about
the USB device you are using for
BD Live data storage including
the storage space. You can also
delete BD Live data and change the
device.
Digital Output
Anynet+
(HDMI-CEC)
Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack. Also
turns dynamic range control off for
Dolby Digital and Dolby Digital Plus.
Dynamic
Range Control
BD Data
Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
Management
On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
|
18
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Your Network Connection
Language
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
theater's network connection.
You can select the language you prefer for the On-
Screen Menu, disc menu, etc.
• The selected language will only appear if it is
supported on the disc.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below. If it
is static, you must use the manual procedure that follows.
Security
• Before you begin, confirm that the product is
connected to your router with a network cable.
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created your
own PIN.
K
Automatic
Prevents playback of Blu-ray Discs
To start the configuration process, follow these steps:
BD Parental
Rating
with a rating equal to or above a
specific age rating unless the PIN is
entered.
In the Home menu, select Settings, and then press
1.
the
button.
E
Select Network, and then press the
button.
E
2.
Prevents playback of DVDs with a
rating above a specific numerical
rating unless the PIN is entered.
DVD Parental
Rating
Select Wired Network Settings, and then press
3.
the
button.
E
Changes the 4-digit PIN used to
The Wired Network Settings screen appears.
Change PIN
access security functions.
Press the
button on the Internet Protocol Setup
4.
►
menu.
General
Use
button to select Auto, and then press the
▲▼
button.
E
You can specify the time zone that
Time Zone
is applicable to your area.
Settings
Wired Network Settings
Display
Support
Internet Protocol Setup : Auto
\
Audio
IP Address
Subnet Mask
Gateway
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
Netwo
System
Langua
For more information about the
Software Upgrade function, see
"Upgrading Software" on page 20.
Software
Upgrade
Securit
Genera
Suppor
DNS
DNS Server
: Auto
:
0
0
0
0
Contact
Provides contact information for
Samsung
assistance with your product.
>
Move
"
Select
Return
'
Terms of
Service
View the general disclaimer
regarding third party contents and
services.
All settings will revert to the default
except for the network settings. The
default security password is 0000.
The Network function acquires and fills in the values
for IP Address, Subnet Mask, etc., automatically.
5.
6.
7.
Agreement
After the Network function has acquired the network
Reset
values, press the RETURN ( ) button.
'
Select Network Test, and then press
. The
E
home theater validates the network connection.
When it is done, press the RETURN ( ) button.
'
Networks and the Internet
K
Manual
When you connect this product to a network, you can
use network based applications and functions such as
BD-LIVE and upgrade the product's software through the
network connection.
If you have a static IP address or the Automatic procedure
does not work, you’ll need to set the Network Settings
values manually. You can get the Network Settings from
your Internet Service Provider (ISP).
|
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Select one of the following methods:
• By Online
4.
5.
Settings
Wired Network Settings
Display
• By USB
Internet Protocol Setup : Manual
\
Audio
IP Address
Subnet Mask
Gateway
:
:
:
0
0
0
0
0
0
• Auto Upgrade Notification
Networ
System
Langua
255 255 255
Press the E button.
0
0
0
Directions for each method begin below.
Securit
Genera
Suppor
DNS
DNS Server
: Manual
:
0
0
0
0
| NOTES |
The update is complete when the product turns off
>
Move
"
Select
Return
\
\
\
'
after restarting. Press the POWER button to turn
on the updated product for your use. Never turn the
product on or off manually during the update process.
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto in
Step 4.
1.
Press the
button to go to the first entry field (IP
2.
3.
4.
▼
Address).
If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
Use the number buttons on your remote to enter
numbers.
By Online
When done with each field, use the ► button to
move successively to the next field.
You can also use the other arrow buttons to move
up, down, and back.
Your product must be connected to the Internet to use
the By Online function. Remove all discs before you
begin.
Select By Online, and then press the E button.
1.
2.
Enter the IP Address, Subnet Mask, and Gateway
5.
The Connecting to Server message appears.
values.
If an update is available, a popup message appears
asking if you want to upgrade. If you select Yes, the
product turns off automatically, turns on, and then
begins the upgrade.
Press the ▼ button to go to DNS.
6.
Press the ▼ button to go to the first DNS entry field.
Enter the numbers as above.
7.
Press the RETURN ( ) button on your remote.
'
8.
9.
| IMPORTANT |
Select Network Test, and then press
. When the
E
Never turn the home theater on or off manually during
\
test is completed, press the RETURN ( ) button to
'
a software upgrade.
exit to the previous screen.
The update progress popup appears. When
3.
Select Network Status, and then press
.
E
10.
11.
the update is completed, the product turns off
automatically again.
The Network Status screen appears.
The product verifies the network connection and
then connects to the network. When it is done,
Press the POWER button to turn on the product.
4.
| NOTES |
highlight OK, and then press
.
E
The update is complete when the product turns off
\
after restarting. Press the POWER button to turn on
Upgrading Software
the updated product for your use.
Never turn the product off or on manually during the
update process.
\
\
The Software Upgrade menu allows you to upgrade the
product’s software for performance improvements or
additional services.
Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable internet
connection or consumer negligence during software
upgrade.
• Never turn the product off or back on manually
during the update process.
In the Home menu, select Settings, and then press
By USB
1.
the
button.
E
1.
2.
Select Support, and then press the
button.
E
2.
Click SUPPORT on the top right of the page.
Select Software Upgrade, and then press the
E
3.
button.
|
20
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter the product's model number into the search
field. As you enter the model number, a drop down
will display products that match the model number.
| NOTES |
3.
The update is complete when the product turns off
\
after restarting. Press the POWER button to turn
on the updated product for your use. Never turn the
product on or off manually during the update process.
Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable Internet
connection or consumer negligence during software
upgrade.
Left click your product's model number in the drop
down list.
4.
5.
\
On the page that appears, scroll down to and then
click Firmware Manuals & Downloads.
Click Firmware in the center of the page.
6.
Click the ZIP icon in the File column on the right
7.
side of the page.
Setting Up DLNA
Click Send in the first pop-up that appears. Click
OK in the second pop-up to download and save the
firmware file to your PC.
8.
9.
DLNA enables you to play music, video and photo files
located in your PC using this product. To use DLNA, you
must connect the product to your PC via the network (See
page 13) and install the SAMSUNG PC Share Manager
on the PC.
Unzip the zip archive to your computer. You should
have a single folder with the same name as the zip
file.
Copy the folder to a USB flash drive.
10.
11.
To Download the DLNA Software
Make sure no disc is inserted in the product, and
then insert the USB flash drive into the USB port of
the product.
To use DLNA with your PC, you must install DLNA
software on your PC. You can download the PC software
and get detailed instructions for using DLNA from the
Samsung.com website.
In the product’s menu, go to Settings > Support >
12.
13.
Software Upgrade.
1.
Select By USB.
Click SUPPORT at the top of the page.
2.
3.
| NOTES |
Enter the product's model number into the search
field. As you enter the model number, a drop down
will display products that match the model number.
There should be no disc in the product when you
\
\
\
upgrade the software using the USB Host jack.
Never turn the product off or on manually during the
update process.
Left click your product's model number in the drop
down list.
4.
5.
When the software upgrade is done, check the
On the page that appears, scroll down to and then
software details in the Software Upgrade menu.
click Firmware Manuals & Downloads.
Click the Software tab.
6.
Auto Upgrade Notification
On the software tab, click the EXE icon on the right
side of the DLNA line.
7.
If your product is connected to the network and you
set Auto Upgrade Notification on, the product will notify
you if a new software version is available with a pop-up
message.
In the first pop-up that appears, click Send. In the
8.
9.
10.
second pop-up, click Save File.
Turn on the product.
1.
Find the DLNA install file on your disk, and then
double click the file.
In the Software Upgrade menu, set Auto Upgrade
2.
Notification to On.
In the pop-up that appears, click Run, and then
If there is a new software version available, the
product will notify you with a pop-up message.
follow the directions that appear on your screen.
To upgrade the firmware, select Yes. The product
turns off automatically, turns on, and then begins
the upgrade.
3.
4.
5.
Download the DLNA Installation/Instruction manual from
the same Software Tab by clicking the corresponding
PDF file symbol in the File column on the right. The
file, in PDF format, will download and open. Follow the
directions to install and setup DLNA. You can view and/or
save the file.
The update progress popup will appear. When
the update is complete, the product will turn off
automatically again.
Press the POWER button to turn on the product.
| NOTES |
To use DLNA with your smartphone, you need to
\
connect your set & smartphone to the same router.
|
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
-1
6 . Press the ▲▼ buttons to select Videos, Photos or
Playing Files on a USB Device
Music, then press the
button.
E
-1
-1
7 . If files appear on the screen go to Step 8 . If file
You can play multimedia files located on a connected
folders appear on the screen, use the ▲▼◄►
USB device.
buttons to select a folder, press
, and then go to
E
Move to the Home menu.
1.
-1
Step 8 .
In Stop mode, connect the USB storage device to
2.
-1
8 . Use the ▲▼◄► buttons to select a file to play or
the USB port on the front panel of the product. The
message “Do you want to access the device?” is
displayed.
view, and then press the
button.
E
| NOTES |
Press the ◄► button to select Yes, then press the
3.
4.
3D file playback is not supported.
\
\
E button.
To prevent possible damage to the USB memory,
you must remove the USB storage device safely
using the “Safely Remove USB” function. Press the
HOME button to move to the Home menu, select the
YELLOW (C) button, and then press the E button.
Press the RED (A) button.
Videos
Photos
Music
Settings
Playing a Disc with User Recorded
Content
CD
USB Flash Disk
You can play multimedia files you have recorded on DVD
or CD discs.
App 2
App 3
dView Devices
App 4
Enter
Turn on the home theater.
1.
CD
a Change Device
"
Open the disc tray, place a user recorded disc into the
2.
disc tray with the disc’s label facing up, and then close
the tray.
Press the ▲▼ buttons to select USB Flash Memory
5.
6.
7.
or USB Flash Disc, and then press the
button.
E
After the disc loads, press the RED (A) button.
3.
4.
5.
6.
Press the ◄► buttons to select Videos, Photos or
Press the ▲▼◄► buttons to select CD or DVD,
Music, then press the
button.
E
and then press the E button.
If files appear on the screen go to Step 8. If file
folders appear on the screen, use the ▲▼◄►
Press the ▲▼ buttons to select Videos, Photos or
Music, then press the E button.
buttons to select a folder, press
Step 8.
, and then go to
E
If files appear on the screen, go to Step 7. If file
folders appear on the screen, use the ▲▼◄►
buttons to select a folder, press E, and then go to
Step 7.
Use the ▲▼◄► buttons to select a file to play or
8.
view, and then press the
button.
E
OR
-1
Use the ▲▼◄► buttons to select a file to play or
7.
4 . Press the BLUE (D) button.
view, and then press the E button.
OR
CD
Settings
USB Flash Disk
-1
3 . After the disc loads, press the BLUE (D) button.
-1
4 . Press the ◄► buttons to select CD or DVD, and
then press the
button.
E
-1
5 . Press the ▲▼ buttons to select Videos, Photos or
Music, and then press the
button.
E
-1
-1
App 1
USB Flash Disk
App 2
App 3
App 4
Enter
6 . If files appear on the screen go to Step 7 . If file
folders appear on the screen, use the ▲▼◄►
dHome
"
buttons to select a folder, press
, and then go to
E
-1
Step 7 .
-1
5 . Press the ◄► buttons to select USB Flash Memory
-1
7 . Use the ▲▼◄► buttons to select a file to play or
or USB Flash Disc, and then press the
button.
E
view, and then press the
button.
E
|
22
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the disc menu, title menu, popup menu
and title list
Playing a Commercial Video Disc
Place a disc into the disc tray with the disc’s label
facing up and then close the disc tray. Playback starts
automatically. If it does not playback automatically, move
• DISC MENU : During playback, press this
button to display the Disc menu.
• TITLE MENU : During playback, press this
to Videos in the Home menu and press the
button.
E
button to display the Title menu.
In most cases, commercial videos will display a disc
2
-
If your disc has a playlist, press the GREEN
menu. To play the movie on the disc, select Play on the
(B) button to go to the playlist.
disc menu, and then press
.
E
• POPUP MENU : During playback, press this
button to display the Pop-up menu.
| NOTES |
• DISC MENU or TITLE MENU : During
playback, press this button to display the title
list.
For more information about playing videos, go to
"Controlling Video Playback" on this page.
\
Controlling Video Playback
Using the TOOLS Menu
During playback, press the TOOLS button.
You can control the playback of video files located
on Blu-ray, DVD, and CD discs, and on USB storage
devices. Depending on the media, some of the functions
If the movie or video have more than
Title
one title, move to or select a desired
title.
dBeusctrtiboendsinothnis tmhaenuRalemmayontoet bCe aovnaitlarbolel.used
Select to move to a specific
Playing Time
Repeat Mode
playback point. Use the numeric
buttons to input the playback point.
for Video Playback
DISC MENU
TITLE MENU
Select to repeat a specific title,
chapter (BD/DVD discs only) or
marked section.
Select to set the picture mode.
POPUP
0
2
1
-
Mode
User : Lets you adjust the
Brightness, Contrast, Color
and Sharpness function
respectively.
Playback related buttons
The product does not play sound in Search,
Slow, or Step mode.
Picture
Settings
Dynamic : Choose this setting
to increase Sharpness.
• 6 : Starts playback.
• 5 : Stops playback.
• 7 : Pauses playback.
Normal : Choose this setting
for most viewing applications.
Movie : This is the best setting
for watching movies.
• Fast Motion Play : During playback, press
the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
Lets you adjust the audio delay so
that the audio syncs with the video.
You can set the delay between 0
and 300 milliseconds.
Audio Sync
• Slow Motion Play : In pause mode, press the
1
4 button.
Each time you press the 4 button, the
playback speed will change.
Menu that appears only when a BD/DVD
disc plays
• Step Motion Play : In pause mode, press the
7 button.
Each time you press the 7 button, a new
frame appears.
Select to move to a chapter that you
Chapter
• Skip Motion Play : During playback, press
want to watch.
the 1 or 2 button.
Select to set the desired audio
Each time you press 1 or 2 button, the
disc moves to the previous or next chapter or
file.
Audio
language.
|
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
To play a particular track, use the ▲▼ buttons on the
2.
Select to set the desired subtitle
Subtitle
remote to select the track, and then press the
E
language.
button.
To view a scene from another angle.
The Angle option displays the
number of angles available to view
(1/1, 1/2, 1/3, etc.).
| NOTES |
Angle
For more information about playing music, go to
\
"Controlling Music Playback" on this page.
BONUSVIEW
Video /
Select to set the desired bonusview
option.
Controlling Music Playback
BONUSVIEW
Audio
You can control the playback of music content located on
DVDs, CDs, and USB storage devices.
Menu that appears only when a file plays
Buttons on the Remote Control used
for Music Playback
Select to set the desired full screen
Full Screen
size. You can select Original,
Mode1 (larger), and Mode2 (largest).
1
4
2
5
8
0
3
6
Information
| NOTES |
Check the video file's information.
1
7
9
DISC MENU
TITLE MENU
Depending on the disc or storage device, the Tools
\
POPUP
CrmeaentuinmgayadiVffeird. AelloopPtiolansylmisaty not be displayed.
4
2
3
5
6
You can create a playlist of video files in a way that is
nearly identical to the way you create a playlist of music
files. For instructions, see "Creating a Music Playlist" on
page 25.
NUMBER buttons : During Playlist playback,
press the desired track number. The selected
track is played.
Skip : During playback, press the 1 or 2
button to move to the previous or next music
track.
1
Playing a Pre-Recorded
Commercial Audio Disc
2
3
Insert an Audio CD (CD-DA) or an MP3 Disc into the
1.
disc tray.
• For an Audio CD (CD-DA), the first track will be
played automatically. Tracks on a disc are played
in the order in which they were recorded on the
disc.
5 button : Stops a track.
Fast Play (Audio CD (CD-DA) only) :
During playback, press the 3 or 4 button.
4
Each time you press the 3 or 4 button, the
•
For an MP3 disc, press the ▲▼ buttons to select
playback speed will change.
Music, then press the
button.
E
7 button : Pauses a track.
6 button : Plays the currently selected track.
5
6
Playlist
/12
Tools
TRACK 001
Repeat Mode
_
One
+
7
Information
Move
7
>
<
Adjust
'
Return
Repeating Tracks
TRACK 003
TRACK 004
TRACK 005
TRACK 006
04:07
03:41
03:17
03:35
You can set the product to repeat tracks.
During music playback, press the TOOLS button.
1.
+
00:08 / 05:57
Use
button to select Off, Track or One, All or
◄►
2.
Shuffle in Repeat Mode, and then press the
E
button.
CD
Pause
Tools
Return
"
'
|
24
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating a Music Playlist
Controlling Photo Playback
If playing music from a commercial CD or DVD,
1.
You can control the playback of photos located on
DVDs, CDs, and USB storage devices.
press the
5
or RETURN ( ) button. The Music
'
List Screen appears. If you are creating a playlist
from music on a user created disk or USB device,
access the Music list as described in "Playing Files
on a USB Device" on page 22 or "Playing a Disc
with User Recorded Content" on page 22.
Using the Tools Menu
During playback, press the TOOLS button.
Press the ▲▼◄► buttons to move to the desired
file, and then press the YELLOW (C) button to
select it. Repeat this procedure to select additional
files.
Start / Stop
2.
Select to play/pause the slide show.
Slide Show
Slide Show
Select to adjust the slide show speed.
Speed
Music TRACK 002
2 files selected 1/2 Page
Background Select to listen to music while viewing
TRACK 001
05:57
TRACK 002
04:27
Music
Zoom
a slide show.
TRACK 003
04:07
TRACK 004
03:41
Select to enlarge the current picture.
(Enlarge up to 4 times)
TRACK 005
03:17
TRACK 006
03:35
TRACK 007
03:47
TRACK 008
03:49
Select to rotate a picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Rotate
TRACK 009
03:53
TRACK 010
03:45
CD
c
Select Jump page
Return
'
Shows the picture information including
Information
| NOTES |
the name and size, etc.
To remove a file from the Playlist, move to the file,
3.
4.
5.
6.
and then press the YELLOW (C) button.
Press the E button to play the selected files. The
Depending on the disc or storage device, the Tools
menu may differ. All options may not be displayed.
To enable the background music function, the photo
file must be in the same storage media as the music
file. However, the sound quality can be affected by the
bitrate of the MP3 file, the size of the photo, and the
\
\
Playlist screen appears.
To go to the Music List, press the 5 or RETURN (')
button.
To go back to the Playlist, press the E button.
Creenactoidningg maePthhodo.to Playlist
| NOTES |
You can create a playlist with up to 99 tracks on Audio
\
\
CDs (CD-DA).
You can create a playlist of photos in a way that is nearly
identical to the way you create a playlist of music files. For
instructions, see "Creating a Music Playlist" on this page.
If you go to the Music List from the Playlist, and then
return to the Playlist, the Playlist will start playing again
from the beginning.
|
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
Listening to Radio
Using the TV SOUND Button on
the Remote Control
Using Buttons on the Remote Control
If you have a TV that supports Anynet+ (HDMI-CEC), the
TV SOUND button lets you direct the TV's audio to the
Home Theater Speakers or the TV Speakers. To use,
follow these steps:
Press the FUNCTION button to select FM.
1.
2.
Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button to select
PRESET and then press the TUNING UP,
DOWN button to select the preset station.
Connect an HDMI cable to the TV and home
1.
2.
3.
theater. (See page 14.)
Set Anynet+ (HDMI-CEC) On in the home theater
-
Before you can tune to preset stations, you
must add preset stations to the product's
memory. See Presetting Stations below.
and TV.
Press the TV SOUND button on the remote control.
TV SOUND ON flashes on the display on the front
panel, and then changes to D. IN.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING UP,
DOWN button to tune in to a lower or higher
frequency.
• When TV SOUND is on, TV audio outputs through
the Home Theater speakers.
• Automatic Tuning : Press the 5 button to select
MANUAL and then press and hold the TUNING
UP, DOWN button to automatically search the
band.
Press the TV SOUND button again to turn TV
4.
SOUND off.
• When TV SOUND is off, TV audio outputs through
the speakers of the connected Anynet+ TV.
Setting Mono/Stereo
K
Use TV SOUND:
Press the MO/ST button.
1) When you want to listen to the TV's audio through
the home theater speakers.
• Each time you press the button, the sound switches
between STEREO and MONO.
2) When you want to listen to the audio from a USB
device plugged into the TV through the home
theater speakers.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
K
Presetting Stations
TV SOUND ON/OFF support specification
Example : Presetting FM 89.10 into memory.
Anynet+
(HDMI-CEC)
Setting
TV
TV
Press the FUNCTION button to select FM.
1.
Connected TV
Sound Sound
Press the TUNING UP, DOWN button to select
ON
OFF
2.
<89.10>.
Anynet+
ON
O
O
Press the TUNER MEMORY button.
• NUMBER flashes on the display.
Press the TUNER MEMORY button again.
3.
4.
(HDMI-CEC)
supported TV
OFF
O
X
Anynet+
• Press the TUNER MEMORY button before
(HDMI-CEC) not
supported TV
No operation
O
X
NUMBER disappears from the display on its own.
• After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 4.
5.
• To tune in to a preset station, press the TUNING
UP, DOWN button.
|
26
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
▲
Use the %◄► button to select the folder with the
6.
7.
Using BD-LIVE™
kind of files you selected, and then press
. The
E
File List is displayed.
Select the file you want to view or play, and then
Connect the product to the network.
1.
2.
press
| NOTES |
.
E
(See page 13)
Configure the network settings.
(See pages 19~20)
You can create Playlists from files on your PC in the
same way you create playlists from files on USB
devices and discs.
\
\
\
Once the product is connected to your network, you can
enjoy various movie-related service contents available on
BD-LIVE compliant discs.
With a few exceptions, you can control the playback
of files on your PC in the same fashion you control the
playback of files on USB devices and discs.
You can also access files on your PC by first selecting
Videos, Photos, or Music on the Home screen,
and then selecting your PC from the device list that
appears.
Attach a USB memory stick to the USB jack on
1.
the front of the product, and then use BD Data
Management to check its remaining memory. The
memory device must have at least 1GB of free
space to accommodate the BD-LIVE services.
Select Settings on the Home screen, and then
2.
press the
button.
E
Apps
Select System, and then press the
button.
E
3.
Select BD Data Management, and then press the
4.
Your home theater comes with the following eleven built-
in apps:
button.
E
Select Change Device, and then press the
E
5.
6.
button.
App
Use
Select USB Flash Disk, and then press the
E
Netflix
Movies and TV shows.
Movies and TV shows.
Movies and TV shows.
On-line music.
button.
Vudu
Insert a Blu-ray Disc that supports BD-LIVE.
7.
Select an item from the list of BD-LIVE service
CinemaNow
Pandora
YouTube
8.
contents provided by the disc manufacturer.
| NOTES |
User created videos.
The way you use BD-LIVE and the provided contents
\
Gateway to on-line sources of
video content such as TMZ, vimeo,
Showtime Featurettes, and College
Humor.
may differ, depending on the disc manufacturer.
Launchpad
Using DLNA
Rhapsody
On-line music.
DLNA lets you access and play files located on your PC
through your home theater.
Local, national, and international
AccuWeather
Follow the directions in the DLNA user's guide to setup
DLNA on your PC and to tag folders and files you want to
share with the home theater.
weather.
Twitter
Short comments on events.
Photo storage and display.
Social networking.
To access and play files located on your PC after you
Flickr
have setup DLNA, follow these steps:
Facebook
Turn on your PC, your TV, and the home theater.
1.
Make sure the DLNA Shared server is running on
2.
Netflix, Vudu, CinemaNow, Pandora, Rhapsody, Twitter,
Flickr, and Facebook require you to create accounts
before you can use them. Although you can create an
account at most of these sites through your home theater,
it is easier and quicker to create an account by visiting
the sites on line using a PC, laptop, or tablet with Internet
access. Note that in some cases, you will need to use
the home theater and a PC, laptop, or tablet to establish
an account. On the following pages are instructions for
three apps - Netflix, Pandora, and YouTube - that work
somewhat differently than their on-line versions.
your PC.
On your home theater, press the BLUE (D) button
3.
4.
5.
(View Devices).
Use the ◄► button to select your PC in the Device
List.
Select the kind of file you want to view or play,
Videos, Photos, or Music, and then press
.
E
|
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
Repeat the same process for the all the fields
displayed (Last Name, E-mail, etc.).
| NOTES |
12.
13.
To exit these applications, press the EXIT button on
\
After you have entered your password confirmation,
your remote.
select Continue at the bottom of the screen, and
then press the
button.
E
Using Netflix
On the Your Payment Information page, fill in the
14.
fields in the same manner as the previous page.
You can use your home theater to stream movies, TV
shows, and other video content from Netflix. To stream
content from Netflix, you must connect your home theater
| NOTES |
The only exception is the Expiration Date field where
\
tSotyaorutrinnegtwNorke.tSfleiexpfaogerst1h3eanFdir1s9t. Time
15.
you select the Expiration month and year.
After you have entered all the required information,
select the I agree check box, and then press the
On the Home screen, select Netflix and then press
1.
button.
E
the
button.
E
Select Start Membership, and then press the
E
16.
| NOTES |
button. The Blu-ray product logs onto Netflix and
presents a choice of regular Netflix (a red rectangle)
or Just for Kids. Select either, and then press the
If this is the first time you start any of the apps at the
bottom of the screen, you will be asked to read and
agree to the Terms of Service Agreement and the
Samsung Service Privacy Policy. You must agree to
both to continue. After you have agreed to both, go to
Step 2.
\
button.
E
| NOTES |
To return to the previous page, press the Return
\
\
button on your remote.
If you already have a Netflix account, select
2.
To exit Just for Kids, select Exit Just for Kids at the
Member Sign In, and then press the
button.
E
top of the Just for Kids page, and then press the
E
Go to Step 3. If you do not have a Netflix account,
button.
select Start Your Free Trial, and then press the
E
To exit Netflix, press the Exit button on your remote.
\
button. Go to Step 9.
Select the E-mail field, and then press the
E
3.
4.
Selecting a Movie or Video
button.
Movies and videos on Netflix are displayed in rows by
category. To scroll through a row, use the ◄► buttons.
To move up or down, from one row to another, use the
▲▼ buttons. To select a movie or video, highlight it, and
Enter your e-mail address by selecting character,
number, or symbol keys on the screen using the
▲▼◄►buttons, and then pressing the
button.
E
When done, move the cursor to Enter at the bottom
5.
then press the
button.
E
of the screen, and then press the
button.
E
You can also search for movies and videos by keywords -
title, director’s name, actor’s name, etc.
Repeat the same process for the Password field.
6.
To search, follow these steps:
After you have entered your password, select
7.
Continue at the bottom of the screen, and then
Select the Search field at the top of the movie/ video
1.
2.
press the
button.
E
list screen, and then press the
button.
E
If the E-mail and Password are correct, the product
will log onto Netflix and present a choice of regular
Netflix (a red rectangle) or Just for Kids. Select
8.
Using the ▲▼◄► buttons, select a letter or
number, and then press the
button. The
E
character you selected appears at the top of the
field on the right.
either, and then press the
button. Netflix is now
E
activated. For instructions about selecting a movie
or video to watch, go to Selecting a Movie or
Video.
Repeat Step 2 to select more letters or numbers.
3.
4.
5.
6.
As you add more letters, Netflix will start to display
matches in the field on the right.
If you selected Start Your Free Trial, select the First
9.
To move to the list of matches, press the ► button
one or more times.
Name field, and then press the
button.
E
Enter your first name by selecting character,
number, or symbol keys on the screen using the
10.
To select a movie or video, highlight it and then
press the
button.
E
▲▼◄►buttons, and then pressing the
button.
E
When done, move the cursor to Enter at the bottom
11.
| NOTES |
of the screen, and then press the
button.
E
Select Clear at the top of the screen to clear all
\
entered characters.
|
28
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the Delete button (with an X) at the top of the
screen to delete the last character you entered.
Just for Kids does not have a Search function.
\
\
Using YouTube
You can use your home theater to stream video content
from YouTube. To stream content from YouTube, you
must connect your Blu-ray product to your network. See
page 11.
Using Pandora
You can use your home theater to stream music from
Pandora, free of charge. To stream music from Pandora,
you must connect your home theater product to your
network. See pages 13 and 19.
Starting YouTube for the First Time
On the Home screen, select YouTube, and then
1.
press the
button.
E
Starting Pandora for the First Time
| NOTES |
If this is the first time you start any of the apps at the
bottom of the screen (Netflix, Pandora, or YouTube),
you will be asked to read and agree to the Terms
of Service Agreement and the Samsung Service
Privacy Policy. You must agree to both to continue.
After you have agreed to both, go to Step 2.
\
On the Home screen, select Pandora, and then
1.
press the
button.
E
| NOTES |
If this is the first time you start any of the apps at the
bottom of the screen (Netflix, Pandora, or YouTube),
you will be asked to read and agree to the Terms
of Service Agreement and the Samsung Service
Privacy Policy. You must agree to both to continue.
After you have agreed to both, go to Step 2.
\
On the YouTube screen, use the ▲▼ buttons, to
2.
select Discover Channels, Search, My YouTube,
or Featured, and then press the
E button.
• Discover Channels lets you see the channels
On the Pandora welcome screen, select Activate
that are available and lets you select a channel.
2.
3.
Pandora, and then press the
button.
E
• Search lets you search for videos using key
words or names.
If you have a Pandora account already, select Yes in
the pop-up that appears, press the
button, and
• My YouTube lets you access your YouTube
account and send videos from your tablet or
smart phone to your TV.
E
then go to Step 4. If you do not have a Pandora
account, select No in the pop-up that appears, and
then press the
button. Record the activation
E
• Featured displays the currently featured videos
code that appears, and then go to Step 9.
by category and lets you select a category.
Enter your e-mail address. Use the ▲▼◄► buttons
4.
5.
6.
Playing and Controlling Videos
to select a character, and then press the
button.
E
Repeat Step 4 to enter all the characters in your
e-mail address.
To begin, select either Discover Channels or
1.
2.
Featured, and then press the E button.
When done, select Enter at the bottom of the
Use the ◄► buttons to select a category you
want, and then press the E button. YouTube
automatically starts the first video in that category.
screen, and then press the
button.
E
Repeat Steps 4 and 5 to enter your Password.
7.
After the video starts, press the E button. The
Control Panel appears. On the Control Panel you
can Stop, Rewind, Fast Forward, and perform other
operations on the running video by using the ◄►
buttons on your remote to select the appropriate
button on the Control Panel, and then pressing the
E button on the remote.
When done, select Enter at the bottom of the
3.
8.
screen, and then press the
button. The Blu-ray
E
product launches Pandora. Activation is complete.
Stop here.
computer.
9.
Enter the activation code you recorded in Step
3 into the appropriate fields on the Pandora web
page.
10.
Finding and Selecting Other Videos
Related Videos
Follow the instructions on the Pandora web pages
to create a new account.
11.
12.
With a video running and the Control Panel
1.
When done, return to the Activation Code screen,
displayed, press the ▼ button once.
The Information screen appears.
select Continue, and then press the
button.
E
Pandora launches.
|
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Services
In the Information screen, press the ▼ button once.
2.
My YouTube
The Related Videos category appears displaying
individual related videos.
My YouTube lets you access your YouTube account and
send videos from your tablet or smart phone to your TV.
Use the ◄► buttons to select a video, and then
3.
press the
button. The first video stops and the
E
Using My YouTube
video you selected plays.
To use My YouTube, follow these steps;
If you do not find a video you want, press the Return
4.
On the YouTube Home page, select My YouTube,
or ▲ button to return to previous screens.
1.
2.
and then press the
button.
E
Current Play List Videos
On the My YouTube page, use the ◄► buttons to
With a video running and the Control Panel
select either Sign In or Pair, and then press the
1.
E
displayed, press the ▼ button once. The Information
screen appears.
button.
Follow the directions on the screen.
3.
In the Information screen, press the ▼ button once.
2.
The Related Videos category appears displaying
individual related videos.
The Other Apps
Press the ▼ button again. The Current Play List
3.
The other apps either work much more like their on-line
versions (Vudu, Cinema Now, Rhapsody, Flickr, Twitter,
and Facebook) or are easy to use (LaunchPad and
AccuWeather). The main difference between the regular
on-line versions and the versions you can access through
your home theater is that with the home theater versions
you use your remote to enter letters and numbers as
opposed to a keyboard.
appears displaying individual videos in the Current
Play List.
Use the ◄► buttons to select a video, and then
4.
press the
button. The first video stops and the
E
video you selected plays.
If you do not find a video you want, press the
5.
Return or ▲ button to return to previous screens.
Using Search
Review the instructions for Netflix, Pandora, or YouTube
to get a sense of how the other apps work and how
to use your remote to navigate and enter letters and
numbers.
On the YouTube Home screen, select Search, and
1.
2.
then press the
button.
E
On the Search screen, use the ▲▼◄► buttons to
select a character, and then press the
button.
E
The character you selected appears in the field at
the top.
Repeat Step 2 to select more letters or numbers.
3.
4.
As you add more characters, YouTube will start to
display matches in the field on the right. This may
take some time.
To move to the list of matches, press the ► button
one or more times.
5.
6.
To select a video, use the ▲▼◄► buttons to
highlight it, and then press the
button. YouTube
E
plays the video.
| NOTES |
Select Clear at the top of the screen to clear all
entered characters.
\
\
Select the Delete button (with an :) at the top of the
screen to delete the last character you entered.
|
30
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
• Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
Additional Information
• Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
Notes
• This Digital Output setup does not affect the analog
(L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
Connections
HDMI OUT
• If you play MPEG audio soundtracks, the audio signal
outputs as PCM regardless of your Digital Output
selections (PCM or Bitstream).
• Certain HDMI output resolutions may not work,
depending on your TV.
• You must have an HDMI connection to enjoy videos
with 3D technology.
• Digital Output can be activated when Speaker
Selection is set to TV Speaker.
• A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Color to Off in the menu.
BD-Live Internet Connection
Settings
• The Internet connection may be restricted while you
are using BD-LIVE contents.
3D Settings
Anynet+ (HDMI-CEC)
• For some 3D discs, to stop a movie during 3D
playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button
again, then select 3D Settings in the Blu-ray menu.
• Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does
not support CEC.
• If your Samsung TV has an Anynet+ logo, then it
• Depending on the content and the position of the
picture on your TV screen, you may see vertical black
bars on the left side, right side, or both sides.
supports the Anynet+ function.
BD Data Management
TV Aspect Ratio
• In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
• Depending on the disc type, some aspect ratios may
not be available.
• Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster read/
write speeds.
• If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen, the
picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display
4:3 Pillarbox (black bars on sides of picture).
• The Resume Play function may not work after you
format the storage device.
BD Wise (Samsung Products only)
• The total memory available to BD Data Management
• When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
may differ, depending on conditions.
Speaker Settings
• If the product is connected to a device that does
not support BD Wise, you can not use the BD Wise
function.
• When Speaker Selection is set to TV Speaker,
audio is produced through the TV speakers.
• For proper operation of BD Wise, set the BD Wise
HDMI audio
option in both the product and the TV to On.
• When HDMI audio is outputted to the TV speaker, it
is automatically down-mixed to 2 channels.
Digital Output
• Be sure to select the correct Digital Output or you will
hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible
with compressed formats (Dolby Digital, DTS), the
audio signal outputs as PCM.
|
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Audio Return Channel
Media Play
• When Anynet+ (HDMI-CEC) is Off, the Audio Return
Using the TOOLS button while playing pictures
Channel function is not available.
• If the system is connected to a BD Wise compliant
TV that has set BD Wise to On, the Picture Settings
menu will not appear.
• Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility problem.
• The ARC function is only available if an ARC-
• The Background Music function will not work unless
the music file and the photo file are located on the
same storage media. Also, sound quality can be
impacted by the bitrate of the MP3 music file, the
size of the photos, and the encoding method.
compliant TV is connected.
Playback
Playing a Video files
• Video files with high bitrates of 20Mbps or more
strain the product’s capabilities and may stop playing
during playback.
Playing back a USB Storage Device
• You must remove the USB storage device safely by
performing the “Safely Remove USB” function to
prevent possible damage to the USB memory. Press
the HOME button to move to the Home menu, select
the YELLOW (C) button, and then press the E
button.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language
function depend on the languages that are encoded
on the disc. This function or certain languages may
not be available.
• Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio English soundtrack.
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and
secondary subtitles at the same time.
• The total number of primary and secondary subtitles
are displayed respectively.
Playing a JPEG files
• You can’t enlarge the subtitle and PG graphic in the
full screen mode.
|
32
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Output Selection
Bitstream
(Re-encoded
Dolby D)
Bitstream
Bitstream
Setup
PCM
(Unprocessed)
(Re-encoded DTS)
Connection
HDMI supported AV receiver
PCM
Up to PCM 7.1ch
Up to PCM 5.1ch
PCM
Dolby Digital
Dolby Digital
Dolby Digital
Up to PCM 5.1ch
Dolby Digital Plus
Dolby TrueHD
Plus
Dolby TrueHD
DTS
Audio
Up to PCM 5.1ch
Up to PCM 5.1ch
Re-encoded
Stream on
Blu-ray Disc
DTS re-encoded
DTS
Dolby Digital *
DTS-HD High
Resolution
Audio
DTS-HD High
Up to PCM 7.1ch
Resolution Audio
DTS-HD Master
DTS-HD Master
Up to PCM 7.1ch
Audio
Audio
PCM
Dolby Digital
DTS
PCM 2ch
Up to PCM 5.1ch
Up to PCM 5.1ch
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
PCM 2ch
Dolby Digital
DTS
Audio
Stream on
DVD
Decodes the
main feature
audio and
Outputs only the
Decodes the main
feature audio and
main feature audio
BONUSVIEW
audio stream
together into
Decodes the main
feature audio and
BONUSVIEW audio
stream together
stream so that your BONUSVIEW audio
AV receiver can
decode the audio
bitstream.
stream together
Definition for
Blu-ray Disc
into PCM audio and PCM audio and
Any
adds Navigation
Sound Effects, then
re-encodes the
adds Navigation
Sound Effects,
then re-encodes
into PCM audio and
adds Navigation
Sound Effects.
You will not hear
BONUSVIEW audio
or Navigation Sound PCM audio into DTS the PCM audio
Effects.
bitstream.
into Dolby Digital
bitstream or
PCM.
If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
-
-
-
Main Feature Audio : The audio soundtrack of the main feature.
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
Navigation Sound Effects: Sound effects that occur when you navigate the disc's or movie's menu. Navigation Sound
Effects are different on each Blu-ray disc.
|
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
DVD playback
HDMI Mode
HDMI Mode
Output
E-contents/
Setup
Blu-ray Disc
Resolution of Blu-ray
Digital contents
BD Wise
1080p@60F
480i
Disc
Auto
1080p@60F
1080p
Max. Resolution of TV input
Max. Resolution of TV input
1080p@60F
-
-
1080p
Movie Frame : Auto (24Fs)
1080p@24F
-
1080i
720p
480p
1080i
720p
480p
1080i
720p
480p
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed
below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung
Electronics at 1-800-SAMSUNG (1-800-726-7864).
Symptom
I cannot eject the disc.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the Blu-ray/DVD disc.
A Blu-ray/DVD disc purchased from abroad may not be playable.
Playback does not start.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• The home theater does not play sound during fast playback, slow playback, and
step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all 6.
• On certain Blu-ray/DVD discs, sound is output from the front speakers only.
• Check if the speakers are connected properly.
• Adjust the volume.
• When playing audio from a CD, the radio, or a TV, the unit outputs sound to the
front speakers only.
|
34
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check/Remedy
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Sound is produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
The remote control does
not work.
• Are you operating the remote within its operational range and within the proper
angle relative to the sensor?
• Are the batteries drained?
• The disc is rotating but
• Is the TV power on?
no picture is produced.
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• Picture quality is poor
and picture is shaking.
• A poorly manufactured disc may not be playable.
Audio language and
• Audio language and subtitles will not work if the disc does not contain them.
subtitles do not work.
The menu screen does
not appear even when the
menu function is selected.
• Are you using a disc that does not contain menus?
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to
the Blu-ray Disc jacket and then select the appropriate function.
The aspect ratio cannot be
changed.
The product is not
working.
• Press and hold the remote control's 5 button for 5 seconds in NO DISC mode.
This will reset the unit.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
You have forgotten the
rating level password.
• With no disc in the product, press and hold the product's 5 button for longer
than 5 seconds. INIT appears on the display and all settings will return to the
default values.
Then, press the POWER button.
-
Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio • If you press the OPEN/CLOSE ^ button while listening to TV audio using the D. IN
through the Product, no
sound is heard.
or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio
is muted.
"Not Available" appears
• The features or action cannot be completed at this time because:
on screen.
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
|
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Symptom
Check/Remedy
If the HDMI output is
set to a resolution your
TV cannot support (for
example, 1080p), you may
not see a picture on your
TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc
inserted. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
• If random noise appears on the screen, it means that TV does not support HDCP
screen.
(High-bandwidth Digital Content Protection).
DLNA function
I can see folders shared
through DLNA, but I
cannot see the files.
• DLNA shows only Photo, Music, and Movie files. It does not display other kinds of
files.
Video is played
• Check if the network is stable.
intermittently.
• Check if the network cable is properly connected and if the network is not
overloaded.
The DLNA connection
between the TV and PC is
unstable.
• IP addresses under the same subnetwork should be unique, otherwise IP collision
can results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the
• Test whether the network connection is active by using the Network Status
function.
BD-LIVE server.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 31)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
•
The USB memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 31
)
| NOTES |
When the factory default settings are restored, all stored user BD data is deleted.
\
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
An engineer is called out to your home at your request and there is no defect in the product.
1.
You bring the unit to a repair center and there is no defect in the product.
2.
We will provide you with the amount of the administration fee before we make a home visit or begin any work on your
product.
com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your product.
|
36
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Requirements
AC 110-120V , 50/60Hz
Power Consumption
Weight
59 W
5.0 Ibs
General
Dimensions
16.9 (W) x 2.1 (H) x 9.8 (D) inches
Operating Temperature Range +41°F to +95°F
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
Video
10 % to 75 %
55 dB
FM Tuner
HDMI
12 dB
0.5 %
1080p, 1080i, 720p, 480p
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
Center speaker output
Surround speaker output
Subwoofer speaker output
80W x 2 (3—)
80W (3—)
80W x 2 (3—)
100W (3—)
Amplifier
Analog input : 20Hz~20kHz ( 3dB)
Digital input : 20Hz~40kHz ( 4dB)
70dB
Frequency response
S/N Ratio
Channel separation
Input sensitivity
60dB
(AUX) 500mV
Speaker (5.1ch speaker system)
Speaker
system
Dimensions
Output sound Rated Maximum
Weights
(Ibs)
0.77
0.77
0.77
8.30
Impedance Frequency range
pressure level input
input
160W
200W
(W x H x D) (inches)
Front
Surround
Center
3.7 x 4.5 x 2.9
3.7 x 4.5 x 2.9
3.7 x 4.5 x 2.9
6.1 x 11.8 x 11.2
200Hz~ 20kHz
3 —
80W
84dB/W/M
Subwoofer
55Hz ~ 300Hz
100W
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Design and specifications are subject to change without prior notice.
• Dispose of unwanted electronics through an approved recycler.
|
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original
consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the
product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become
the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set
forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS
IS” basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the
extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following,
including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this
product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect,
fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories,
applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this
product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure
to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the
instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY
TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG customer care center.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660-2112
1-800-SAMSUNG
IN THE US
(726-7864)
AH68-02574A-01
Download from Www.Somanuals.com. All Manuals Search And Download.
|