Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Web Site
Address
Customer Care Center
CANADA
1-800-SAMSUNG (726-7864)
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
U.S.A
1-800-SAMSUNG (726-7864)
Samsung Electronics America, Inc. 85 Challenger
Road Ridgefield Park, NJ 07660-2112
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
Model _____________Serial No. _____________
© 2010 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02541A-04
Download from Www.Somanuals.com. All Manuals Search And Download.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
See the warranty card for more information on warranty terms.
✎
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and
the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics
and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven
aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to
view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned
in images, are not covered by your Samsung limited warranty.
•
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited
Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service
Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
– In the United States : 1-800-SAMSUNG (1-800-726-7864)
– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news
bars at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LCD screen, which will affect image quality. To reduce
risk of this effect, please follow below recommendations:
•
•
•
•
Avoid displaying the same TV channel for long periods.
Always try to display a full screen image.
Reducing brightness and contrast will help to avoid the appearance of after-images.
Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
✎
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
x
The appearance may differ depending on the product.
✎
Be careful when you contact the TV because some parts can be somewhat hot.
✎
Installation with a stand.
Installation with a wall-mount.
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
English
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Getting Started
Advanced Features
y
y
y
y
y
y
y
List of Features ......................................................... 4
Accessories .............................................................. 4
Install the Stand........................................................ 5
Viewing the Control Panel ......................................... 6
Viewing the Remote Control...................................... 7
Connecting to an Antenna ........................................ 8
Plug & Play (Initial Setup)........................................... 8
y
Network Connection............................................... 26
Connecting to a Wired Network
Connecting to a Wireless Network
26
28
y
y
y
Media Play.............................................................. 33
Connecting a USB Device
Connecting to your PC through a network
Screen Display
Playing Multiple Files
Media Play - Additional Functions
33
33
35
38
38
Connections
Anynet+.................................................................. 40
y
Connecting to an AV Device...................................... 9
Connecting to an Audio Device............................... 11
Connecting to a PC ................................................ 12
Changing the Input Source ..................................... 13
Setting Up Anynet+
Switching between Anynet+ Devices
Recording
Listening through a Receiver
Troubleshooting for Anynet+
41
41
41
42
42
y
y
y
Internet@TV ............................................................ 43
Basic Features
Getting Started with Internet@TV
Setting up Internet@TV
Using the Internet@TV service
PROFILE Widget
Widget Gallery
Troubleshooting for Internet@TV
43
44
46
48
48
49
y
How to Navigate Menus.......................................... 13
Channel Menu ........................................................ 14
y
Seeing Channels
14
14
14
15
15
Using Favorite Channels
Memorizing Channels
Editing Channels
y
AllShare .................................................................. 50
Other Features
About AllShare
Setting Up AllShare
50
50
y
Picture Menu .......................................................... 16
Changing the Preset Picture Mode
Adjusting Picture Settings
Economical Solutions
Changing the Picture Options
Setting up the TV with your PC
16
16
16
17
19
Other Information
y
y
y
y
y
Installing the Wall Mount ......................................... 52
Assembling the Cables ........................................... 53
Anti-theft Kensington Lock...................................... 53
Securing the TV to the Wall..................................... 54
Troubleshooting ...................................................... 55
y
y
Sound Menu........................................................... 19
Changing the Preset Sound Mode
Adjusting sound settings
Sound Settings
19
19
20
Storage and Maintenance
57
Setup Menu............................................................ 20
y
y
y
y
License................................................................... 58
Specifications ......................................................... 59
Dimensions............................................................. 60
Index ...................................................................... 61
Setting the Time
20
21
21
21
23
24
Using the Sleep Timer
Setting the On/Off Timer
Locking Programs
Other Features
Picture In Picture (PIP)
y
Support Menu......................................................... 24
Check the Symbol!
t
Note
Step by Step Guide
TOOLS
This function can be used by pressing the
TOOLS button on the remote control.
Indicates additional information.
Check here for instructions on how to open
the relevant submenu within the OSD (on
screen display).
English
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
List of Features
y
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.
y
y
y
y
Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 33).
Internet@TV: You can use various internet services and view useful information and entertaining content (p. 43).
AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 50).
Self Diagnosis: You can check to make sure picture and sound operate normally (p. 25).
Accessories
✎
✎
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
y
y
y
Remote Control (BN59-01042A) & Batteries (AAA x 2)
Owner’s Instructions
Warranty Card / Safety Guide / Quick Setup Guide
y
y
Cleaning Cloth (BN63-01798B)
Power Cord
Blanking Bracket
Cable Tie
(BN61-05596A)
Holder-Ring (4EA) (46 ~ 55 inch TVs)
BN61-04529A
(BN63-06339A)
Input Cables (Sold Separately)
HDMI
HDMI-DVI
Component
Composite (AV)
Coaxial (RF)
VGA
English
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the Stand
See separate guide for installing the stand.
(M4 X L12)
or
Stand (1EA)
Guide Stand (1EA)
Screws (9EA)
Follow the steps below to connect the TV to the stand.
Screws (M4 X L12)
Top view
Guide Stand
Stand
Front
Rear
Screws (M4 X L12)
Rear
1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
2
1
2. With your TV upright, connect the TV to the Stand.
3. Fasten two screws (M4 X L12) at position 1, and then
fasten two screws (M4 X L12) at position 2.
✎
NOTE
Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV.
x
x
x
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
one side.
English
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Viewing the Control Panel
✎
The product color and shape may vary depending on the model.
Power Indicator
Speakers
Remote control sensor
Remote control sensor
Aim the remote control towards this spot on the TV.
Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTER button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
SOURCE
E
E
MENU
y
Adjusts the volume. In the OSD, use the
y
buttons as you would use the
◄ and ► buttons on the remote control.
z
Changes the channels. In the OSD, use the
z
buttons as you would use the
▼ and ▲ buttons on the remote control.
Turns the TV on or off.
P
(Power)
Power Indicator
Blinks and turns off when the power is on and lights up in standby mode.
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Remote Control
✎
This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume
buttons.
POWER
ON/OFF
Turns the TV on and off.
SOURCE
Displays and selects the available video
sources (p. 13).
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to ON will reduce the battery usage
time.)
Press to directly access channels.
Press to select additional channels
(digital) being broadcasted by the same
station. For example, to select channel
“54-3”, press “54”, then press “–” and
“3”.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
PRE-CH
MUTE
Adjusts the volume.
CH LIST
MENU
Brings up the OSD.
Displays the channel list on the screen
(p. 14).
@TV
Displays the Content View, which
includes Channel List, Internet@TV,
Media Play, and AllShare.
INTERNET
CONTENT
TOOLS
Link to various internet services (p. 43).
INFO
Displays information on the TV screen.
Quickly select frequently used functions.
Selects the on-screen menu items and
changes the values seen on the menu.
RETURN
A
EXIT
D
Returns to the previous menu.
Exits the menu.
B
C
Buttons used in the Channel List,
Internet@TV, Media Play menu, etc.
MEDIA.P: Displays Media Play (p. 33).
YAHOO!: Runs the Yahoo widget.
(p. 47).
MTS: Press to choose stereo, mono
or Separate Audio Program (SAP
broadcast) (p. 20).
FAV.CH: Displays Favorite Channel Lists
on the screen (p. 14).
P.SIZE: Selects the picture size (p. 18).
CC: Controls the caption decoder (p.
23).
MEDIA.P
FAV.CH
YAHOO!
P.SIZE
MTS
CC
Use these buttons in Media Play and
Anynet+ modes (p. 33, 40).
(�: Controls recording for Samsung
recorders that have the Anynet+ feature)
Installing batteries (Battery size: AAA)
✎
NOTE
Use the remote control within 23 feet from the TV.
x
x
Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
The color and shape may vary depending on the model.
x
English
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenna.
✎
VHF/UHF Antenna
Antenna Cable (Not Supplied)
Cable
ANT OUT
or
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
Selecting a language
Press the ▲ or ▼ button, then press the ENTER
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTER button.
Select the Home Use mode. Store Demo Mode is for retail
E
button.
POWER
1
2
Selecting Store Demo
or Home Use
E
P
y
y
environments.
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
Selecting an antenna
Selecting a channel
Press the ▲ or ▼ button, then press the ENTER
E
button. Select Air, Cable or Auto.
3
4
Press the ▲ or ▼ button, then press the ENTER
E
button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel → Auto Program (p. 14).
✎
Press the ENTER
E
button at any time to interrupt the memorization process.
Setting the Clock
Set the Clock Mode automatically or manually.
5
Mode
y
y
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
Manual: Allows you to manually set the current date and time (p. 21).
View the HDTV
Connection Guide
The connection method for the best HD screen quality is displayed.
6
7
Enjoy the TV.
Press the ENTERE button.
If You Want to Reset This Feature...
O
MENUm
→ Setup → Plug & Play → ENTERE
English
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an AV Device
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
Device
Device
R
W
Red
White
HDMI Cable (Not Supplied)
HDMI OUT
HDMI to DVI Cable (Not Supplied)
DVI OUT
AUDIO OUT
R-AUDIO-L
Audio Cable (Not Supplied)
✎
HDMI IN 1(DVI), 2, 3, 4, PC/DVI AUDIO IN
When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray
player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI
(DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.
x
x
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
English
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
R
W
W
R
B
G
R
Y
Red White Yellow
Red White
Red
Blue Green
Y
W
R
R
W
R
B
G
Video Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Component Cable
(Not Supplied)
Y
R
W
R
B
G
R
W
Device
Device
AUDIO OUT
COMPONENT OUT
VIDEO OUT
AUDIO OUT
R-AUDIO-L
R-AUDIO-L
PR
PB
Y
✎
✎
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (green) will not match the video cable
(yellow).
For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available devices: External devices that support EX-Link.
EX-LINK: Connector for service only.
English
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Audio Device
Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
Audio Cable (Not Supplied)
Amplifier / DVD
home theater
AUDIO IN
R-AUDIO-L
Optical Cable (Not Supplied)
Digital Audio System
W
R
OPTICAL
Red
White
✎
✎
DIGITAL AUDIO OUT (OPTICAL)
When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
x
When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV’s
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD
home theater. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB
(Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the
amplifier or DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
When connecting, use the appropriate connector (sold separately).
x
x
When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier’s volume control.
English
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to a PC
Using an HDMI/DVI Cable or a D-sub Cable
Audio Cable (Not Supplied)
AUDIO OUT
DVI OUT
HDMI to DVI Cable (Not Supplied)
D-Sub Cable (Not Supplied)
PC OUT
AUDIO OUT
Audio Cable (Not Supplied)
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Horizontal Frequency
Vertical Frequency
Pixel Clock Frequency
Sync Polarity
(H / V)
Mode
IBM
Resolution
(KHz)
(Hz)
(MHz)
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-
-/+
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-
-/-
-/-
MAC
720 x 576
1152 x 864
1280 x 720
1280 x 960
35.910
53.783
56.456
75.231
59.950
59.959
74.777
74.857
32.750
81.750
95.750
130.000
-/+
-/+
-/+
-/+
VESA CVT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
-/-
-/-
-/-
+/+
+/+
+/+
-/-
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
-/-
+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA DMT
1280 x 720
1280 x 1024
52.500
74.620
70.000
70.000
89.040
128.943
-/+
-/-
VESA GTF
1920 x 1080p
67.500
60.000
148.500
+/+
VESA DMT / DTV CEA
✎
NOTE
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
The interlace mode is not supported.
x
x
x
x
The set may operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Input Source
Edit Name
O
MENU
m
→ Input → Edit Name → ENTERE
Source List
■
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /
STB satellite receiver.
SOURCE
O
MENU
ENTER
m
→ Input → Source List →
E
✎
✎
When a PC with a resolution of 1920 x 1080 @ 60Hz is
connected to the HDMI IN 1(DVI) port, you should set
the TV DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDMI IN
1(DVI) port, you should set the TV to DVI PC to DVI
Devices mode under Edit Name.
■
TV / PC / AV1 / AV2 / Component1 / Component2 /
HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB
✎
You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
✎
In the Source List, PC is always activated.
Basic Features
How to Operate the OSD (On Screen Display)
How to Navigate Menus
The access step may differ depending on the selected menu.
Before using the TV, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
MENUm
1
MENU
1
INFO
EXIT
▼ / ▲
ENTER
▲ / ▼
◄ / ►
Select an icon with the ▲ or ▼
button.
2
3
4
5
E
Press ENTERE
to access the
2
3
sub-menu.
RETURN
Select the desired submenu with
the ▲ or ▼ button.
4
Adjust the value of an item with the
◄ or ► button. The adjustment in
the OSD may differ depending on
the selected menu.
1
2
MENU button: Displays the main on-screen menu.
ENTER / Direction button: Move the cursor and
E
select an item. Confirm the setting.
ENTER
E
Press ENTER
selection.
E
to confirm the
3
4
RETURN button: Returns to the previous menu.
EXIT button: Exits the on-screen menu.
6
7
Press EXIT.
EXITe
English
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
Channel Menu
¦ Using Favorite Channels
O
MENUm
→ Channel → Channel List → ENTERE
¦ Seeing Channels
Add to Favorite / Delete from Favorite
t
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
Set channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
CH LIST
O
MENU
→ ENTER
m
→ Channel → Channel List
E
2. Add or delete a the channel using the Add to Favorite
or Delete from Favorite menu respectively.
Select a channel in the All Channels,
Added Channels, Favorite or Programmed
screen by pressing the ▲ / ▼ and ENTER
6
6-1
Air
* TV #6
E
buttons. Then you can watch the selected channel.
7
Air
Delete
Add to Favorite
Timer Viewing
8
9
Air
Air
6
Air
6-1
* TV #6
Channel Name Edit
9-1
10
10-1
11-1
* TV #9 Select All
Air
* TV #10
* TV #11
7
8
9
Air
Air
Air
9-1
10
* TV #9
Air
Air
Antenna
B
Zoom
Select
k
Page
T
Tools
10-1
11-1
* TV #10
* TV #11
To show all Favorite channels, click on the
button shown on the right.
FAV.CH
Air
Antenna
B
Zoom
Select
k
Page
T
Tools
■
■
■
■
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favorite: Shows all favorite channels.
¦ Memorizing Channels
*
Programmed: Shows all currently reserved
programs.
O
MENUm
→ Channel → ENTERE
✎
Using the color buttons with the Channel List
t
Antenna (Air / Cable)
Red (Antenna): Switches to Air or Cable.
x
x
B
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Green (Zoom): Enlarges or shrinks a channel
number.
Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
x
Auto Program
c
mark appears to the left of the selected channels.
(Page): Move to next or previous page.
(Tools): Displays the Channel List option menu.
■
■
■
Air: Air antenna signal.
k
x
x
Cable: Cable antenna signal.
Auto: Air and Cable antenna.
T
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
Icons
Operations
A channel selected.
c
*
A channel set as a Favorite.
A reserved Program.
)
English
14
Download from Www.Somanuals.com. All Manuals Search And Download.
✎
NOTE
✎
NOTE
When selecting the Cable TV system: STD, HRC
All deleted channels will be shown on the
x
x
x
x
x
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
All Channels menu.
A gray-colored channel indicates the channel
has been deleted.
The Add menu only appears for deleted
channels.
After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
x
Delete a channel from the Added Channels or
Favorite menu in the same manner.
■
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
¦ Editing Channels
1. Press the ◄ / ► / ▲ / ▼ buttons to select the
O
MENUm
→ Channel → Channel List → ENTERE
desired channel in Channel List.
2. Press the TOOLS button, then select
Channel Name Edit
Timer Viewing.
1. Select a channel and press the TOOLS button.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
2. Edit the channel name using the Channel Name Edit
menu.
■
Channel Name Edit (analog channels only): Assign your
✎
If you selected Once, Every Week or Everyday
in Repeat, you can enter the date you want.
own channel name.
4. Select OK, then press the ENTER
E
button when
¦ Other Features
done.
✎
NOTE
O
MENU
m
→ Channel → ENTERE
Only memorized channels can be reserved.
x
x
Reserved programs will be displayed in the
Clear Scrambled Channel
Programmed menu.
When a digital channel is selected, press the ►
button to view the digital program.
x
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
■
■
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
How to Stop Searching Scrambled Channels
✎
You can only select Deselect All when one or
more channels are selected.
1. Press the ENTER
2. Press the ◄ button to select Yes.
3. Press the ENTER button.
This function is only available in Cable mode.
E
button to select Stop.
E
Programmed
✎
(in Channel List)
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the TOOLS button to display
Options.
Channel List
O
MENUm
→ Channel → Channel List → ENTERE
■
Change Info: Change a show you have reserved to
watch. Begin with step 3 of “Timer Viewing” above.
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/ Delete, Timer Viewing, Select All / Deselect All). Option
menu items may differ depending on the channel status.
■
Cancel Schedules: Cancel a show you have reserved
to watch.
1. Select a channel and press the TOOLS button.
✎
This deletes the highlighted or selected
program(s).
2. Select a function and change its settings.
■
Add / Delete: Delete or add a channel to display the
channels you want.
English
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
■
Information: Display a show you have reserved
to watch. (You can also change the reservation
Information.)
¦ Adjusting Picture Settings
✎
Alternatively, you can view Information by
highlighting a program and pressing the
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
ENTERE
button.
O
MENU
m
→ Picture → ENTERE
■
Select All / Deselect All: Select or deselect all reserved
programs.
Your television has several setting options for picture quality
control.
Fine Tune
✎
NOTE
When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R), the
OSD will be adjusted accordingly.
x
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
x
x
Settings can be adjusted and stored for each
external device connected to the TV.
✎
✎
Settings are applied to the channel you're currently
watching.
¦ Economical Solutions
Fine tuned channels that have been saved are marked
with an asterisk “*” on the right-hand side of the
channel number in the channel banner.
The Eco Function can be used to enhance your power
savings.
✎
To reset the fine-tuning, select Reset.
Eco Solution
Picture Menu
O
MENU
m
→ Picture → Eco Solution → ENTERE
¦ Changing the Preset Picture Mode
■
Energy Saving (Off / Low / Medium / High /
Picture Off / Auto): This adjusts the brightness of the
TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
O
MENU
m
→ Picture → Mode → ENTERE
t
Mode
Select your preferred picture type.
■
Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
■
■
■
Dynamic: Suitable for a bright room.
Standard: Suitable for a normal environment.
✎
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Natural: Suitable for reducing eye strain.
✎
Natural is not available in PC mode.
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
■
Movie: Suitable for watching movies in a dark room.
✎
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
■
No Signal Power Off (Off / 15 min. / 30 min. /
60 min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
✎
Disabled when the PC is in power saving mode.
English
16
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
RGB Only Mode (Off / Red / Green / Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
¦ Changing the Picture Options
Color Space (Auto / Native / Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
Advanced Settings
O
MENU
ENTER
m
→ Picture → Advanced Settings →
E
■
White Balance: Adjust the color temperature for a more
natural picture.
(Advanced Settings are available in Standard / Movie
mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
R-Offset / G-Offset / B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
✎
In PC mode, you can only make changes to
Dynamic Contrast, Gamma and White Balance.
Advanced Settings
Black Tone
: Off
►
■
10p White Balance (Off / On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
Dynamic Contrast
Shadow Detail
Gamma
: Medium
: -2
: 0
✎
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Expert Pattern
RGB Only Mode
Color Space
: Off
: Off
✎
Some external devices may not support this
function.
: Native
▼
Interval: Select interval to adjust.
Red: Adjust the red level.
U
Move
E
Enter
R
Return
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
■
■
■
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
settings.
■
■
Flesh Tone: Emphasize pink “Flesh Tone.”
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Edge Enhancement (Off / On): Emphasize object
boundaries.
■
■
Gamma: Adjust the primary color intensity.
■
xvYCC (Off / On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component IN jacks.
Expert Pattern (Off / Pattern1 / Pattern2)
Running the Expert Pattern function, the picture can
be calibrated. If the OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1: This is a test screen designed to demonstrate
✎
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this
function.
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
✎
After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
✎
✎
While the Expert Pattern is running, sound is not
output.
Only enabled in DTV, Component and HDMI
modes.
English
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
x
Picture Options
O
MENU
ENTER
m
→ Picture → Picture Options →
E
1. Press the ◄ or ► button to select Position.
2. Press the ENTER
E
button.
✎
In PC mode, you can only make changes to the
Color Tone, Size and Auto Protection Time.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
Picture Options
4. Press the ENTER
5. Press the ◄ or ► button to select Reset.
6. Press the ENTER button.
E
button.
Color Tone
: Normal
: 16:9
►
Size
E
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Film Mode
: Auto
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
x
: Auto
: Normal
: Off
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Auto Motion Plus
: Standard
▼
Input Source
Picture Size
U
Move
E
Enter
R
Return
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
PC
16:9, Zoom1,
Zoom2, 4:3
■
Color Tone (Cool / Normal / Warm1 / Warm2)
16:9, 4:3, Wide Fit,
Screen Fit
✎
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
✎
Settings can be adjusted and stored for each external
device connected to an input on the TV.
16:9, 4:3
■
Digital Noise Filter (Off / Low / Medium / High / Auto
/ Auto Visualization): If the broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
■
Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most of the time.
P.SIZE
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
✎
When the signal is weak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
✎
✎
Only available for analog channels.
✎
Available with HD 1080i / 720p signals in 16:9
mode.
When bar is green, you are receiving the best
possible signal.
4:3 : Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
■
■
MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
✎
Available only in HDMI mode.
■
Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎
NOTE
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
x
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
2. Press the ENTER
E
button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTER
5. Press the ► button to select Reset.
6. Press the ENTER button to reset the picture
to its default position.
E
button.
E
English
18
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Auto Motion Plus (Off / Clear / Standard / Smooth /
Custom / Demo): Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
✎
✎
✎
The info screen on your TV displays the resolution
and frequency of the incoming video signal (60
Hz). This displayed frequency is not what the TV is
displaying by using the Auto Motion Plus function.
If noise occurs on the screen, please set the
Auto Motion Plus to Off. If Auto Motion Plus
is Custom, you can set up the Blur Reduction,
Judder Reduction or Reset manually.
1. Click on “Control Panel” on the Windows start menu.
2. Click on “Appearance and Themes” in the “Control
Panel” window and a display dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
If Auto Motion Plus is Demo, you can compare
the difference between on and off modes.
4. Navigate to the “Settings” tab on the display dialog-box.
y
The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
y
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz’.
Otherwise, just click “OK” and exit the dialog box.
Reset: Reset the custom settings.
■
Auto Protection Time (2 hours / 4 hours / 8 hours
/ 10 hours / Off): Set the time the screen remains idle
with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on
the screen.
Sound Menu
¦ Changing the Preset Sound Mode
O
MENU
ENTER
m
→ Sound → SRS TheaterSound →
E
Picture Reset (OK / Cancel)
Resets your current picture mode to its default settings.
t
SRS TheaterSound
¦ Setting up the TV with your PC
■
■
■
■
■
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Set the input source to PC.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
O
MENUm
→ Picture → ENTERE
Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
t
Auto Adjustment
Adjust frequency values/positions and fine tune the settings
automatically.
✎
Not available when connecting with an HDMI/DVI cable.
¦ Adjusting sound settings
O
MENUm
→ Sound → Equalizer → ENTERE
Screen
■
Coarse / Fine: Removes or reduces picture noise. If the
noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Equalizer
Adjusts the sound mode (standard sound mode only).
■
Balance L/R: Adjusts the balance between the right and
left speaker.
■
■
Position: Adjust the PC’s screen positioning if it does
not fit the TV screen. Press the ▲ or ▼ button to adjust
the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
■
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
frequencies.
■
Reset: Resets the equalizer to its default settings.
Image Reset: Resets the image to default settings.
English
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
¦ Sound Settings
Speaker Select (External Speaker /
TV Speaker)
O
MENUm
→ Sound → ENTERE
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
t
SRS TruSurround HD (Off / On)
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
(standard sound mode only)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
✎
✎
✎
When Speaker Select is set to External Speaker.
TV Speaker: Off, External Speaker: On
x
SRS TruDialog (Off / On)
When Speaker Select is set to TV Speaker.
TV Speaker: On, External Speaker: On
x
(standard sound mode only)
This function allows you to increase the intensity of a voice
over background music or sound effects so that dialog can
be heard more clearly.
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as an A/V Receiver/Home theater.
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many audio tracks
(for example, simultaneous translations of the
program into foreign languages).
MTS
■
Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
■
Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
✎
You can only select a language among the
ones being broadcasted.
Multi-Track Sound (MTS)
Sound Reset (OK / Cancel)
(analog channels only)
MTS
■
Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
Reset all sound settings to the factory defaults.
Setup Menu
■
■
Stereo: Choose for channels that are
broadcasting in stereo.
¦ Setting the Time
SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
O
MENUm
→ Setup → Time → ENTERE
✎
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Time
■
Clock: Setting the clock is for using various timer
features of the TV.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
O
The current time will appear every time you press
the INFO button.
■
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
✎
If you disconnect the power cord, you have to set
the clock again.
English
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate the timer with the setting you’ve
chosen, set to Activate.)
Volume: Set the desired volume level.
✎
The antenna must be connected in order to set
the time automatically.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
only when a USB device is connected to the TV)
Antenna (when the Source is set to TV): Select Air or
Cable.
Channel (when the Source is set to TV): Select the
desired channel.
Contents (when the Source is set to USB): Select a
folder in the USB device containing music or photo files
to be played when the TV is turned on automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
✎
NOTE
If there is no music file on the USB device or the
x
folder containing a music file is not selected, the
Timer function does not operate correctly.
Time Zone: Select your time zone.
✎
This function is only available when the
Clock Mode is set to Auto.
When there is only one photo file in the USB,
the Slide Show will not play.
x
x
x
DST (Daylight Saving Time) (Off / On): Switches the
Daylight Saving Time function on or off.
If a folder name is too long, the folder cannot be
selected.
✎
This function is only available when the
Clock Mode is set to Auto.
Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
¦ Using the Sleep Timer
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you
select Manual, you can set up the day you want to
activate the timer.
O
MENU
ENTER
m
→ Setup → Time → Sleep Timer →
E
t
: Automatically shuts off the TV
■
Sleep Timer
✎
The
c
mark indicates the day is selected.
after a preset period of time. (30, 60, 90, 120, 150 and
180 minutes).
✎
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
✎
To cancel the Sleep Timer, select Off.
¦ Setting the On/Off Timer
¦ Locking Programs
O
MENU
ENTER
m
→ Setup → Time → Timer 1 →
O
MENUm
→ Setup → Security → ENTERE
E
You can set the TV to turn on automatically at a preset time.
■
Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
Security
The PIN input screen appears, Enter your 4 digit PIN number.
Timer 1
■
V-Chip: The V-Chip feature automatically locks out
programs that are deemed inappropriate for children.
The user must enter a PIN (personal identification
number) before any of the V-Chip restrictions are set up
or changed.
On Time
▲
Inactivate
12
12
TV
00
00
am
am
▼
Off Time
Inactivate
✎
NOTE
Volume
20
Source
Sun
Antenna
Air
Channel
3
V-Chip is not available in HDMI, Component
x
or PC mode.
Repeat
Once
Mon
Tue
Wed
Thu
Fri
Sat
The default PIN number of a new TV set is
“0-0-0-0”.
x
L
Move
U
Adjust
E
Enter
R
Return
Allow All: Press to unlock all TV ratings.
x
x
Block All: Press to lock all TV ratings.
English
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
V-Chip Lock (Off / On): You can block rated TV
Canadian French: You can block TV programs
Programs.
depending on their French Canadian rating.
TV Parental Guidelines: You can block TV programs
depending on their rating. This function allows you to
control what your children are watching.
– TV-Y: Young children / TV-Y7: Children 7 and over /
TV-G: General audience / TV-PG: Parental guidance
/ TV-14: Viewers 14 and over / TV-MA: Mature
audience
– G: General / 8 ans+: Programming generally
considered acceptable for children 8 years and over
to watch on their own. / 13 ans+: Programming may
not be suitable for children under the age of 13. /
16 ans+: Programming is not suitable for children
under the age of 16. / 18 ans+: Programming
restricted to adults.
✎
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the 8 ans+ category,
then 13 ans+, 16 ans+ and 18 ans+ will
automatically be blocked also.
– ALL: Lock all TV ratings. / FV: Fantasy violence /
V: Violence / S: Sexual situation / L: Adult Language /
D: Sexually Suggestive Dialog
✎
The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block the TV-Y category,
then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then
all the categories in the young adult group will
be blocked (TV-G, TV-PG, TV-14 and TV-MA).
The sub-ratings (D, L, S, V) work similarly. So,
if you block the L sub-rating in TV-PG, then
the L sub-ratings in TV-14 and TV-MA will
automatically be blocked.
Downloadable U.S. Rating: Parental restriction
information can be used while watching DTV channels.
✎
NOTE
If information is not downloaded from the
broadcasting station, the Downloadable U.S.
Rating menu is deactivated.
x
x
x
Parental restriction information is automatically
downloaded while watching DTV channels. It
may take several seconds.
MPAA Rating: You can block movies depending on
their MPAA rating. The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advanced information
on which films are appropriate for children.
– G: General audience (no restrictions). / PG: Parental
guidance suggested. / PG-13: Parents strongly
cautioned. / R: Restricted. Children under 17 should
be accompanied by an adult. / NC-17: No children
under age 17. / X: Adults only. / NR: Not rated.
The Downloadable U.S. Rating menu
is available for use after information is
downloaded from the broadcasting station.
However, depending on the information from
the broadcasting station, it may not be available
for use.
Parental restriction levels differ depending on
the broadcasting station. The default menu
name and Downloadable US Rating change
depending on the downloaded information.
x
✎
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the PG-13 category,
then R, NC-17 and X will automatically be
blocked.
Even if you set the on-screen display to another
language, the Downloadable U.S. Rating
menu will appear in English only.
x
x
x
The rating will automatically block certain
categories that deal with more sensitive
material.
Canadian English: You can block TV programs
depending on their Anglophone Canadian ratings.
– C: Programming intended for children under age 8. /
C8+: Programming generally considered acceptable
for children 8 years and over to watch on their own.
/ G: General programming, suitable for all audiences.
/ PG: Parental Guidance. / 14+: Programming
contains themes or content which may not be
suitable for viewers under the age of 14. / 18+: Adult
programming.
The rating titles (For example: Humor Level..etc)
and TV ratings (For example: DH, MH, H..etc)
may differ depending on the broadcasting
station.
■
Change PIN: The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the Confirm New
PIN screen appears. Re-enter the same 4 digits. When
the Confirm screen disappears, your PIN has been
memorized.
✎
The V-Chip will automatically block any
category that deals with more sensitive material.
For example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
English
22
Download from Www.Somanuals.com. All Manuals Search And Download.
How to watch a restricted channel
■
Digital Caption Options: (digital channels only)
If the TV is tuned to a restricted channel, the V-Chip will
block it. The screen will go blank and the following message
will appear:
Size: Options include Default, Small, Standard and
Large. The default is Standard.
Font Style: Options include Default and Styles 0 to 7.
This channel is blocked by V-Chip. Please enter the PIN to
unblock.
The default is Style 0.
Foreground Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan. You
can change the color of the letter. The default is White.
Background Color: Options include Default, White,
Black, Red, Green, Blue, Yellow, Magenta and Cyan.
You can change the background color of the caption.
The default is Black.
Foreground Opacity: This adjusts the opacity of text.
Options include Default, Transparent, Translucent, Solid
and Flashing.
✎
If you forget the PIN, press the remote-control buttons
in the following sequence, which resets the pin to
“0-0-0-0:” POWER (off) → MUTE → 8 → 2 → 4 →
POWER(on).
¦ Other Features
O
MENUm
→ Setup → ENTERE
Background Opacity: This adjusts the opacity of
the caption background. Options include Default,
Transparent, Translucent, Solid and Flashing.
Return to Default: This option sets each Size, Font
Style, Foreground Color, Background Color, Foreground
Opacity and Background Opacity to its default.
Menu Language
Set the menu language.
1. Select Menu Language and press the ENTER
E
button.
✎
NOTE
2. Choose desired language and press the ENTER
E
button.
Digital Caption Options are available only
when Default and Service1 ~ Service6 can be
x
✎
Choose between English, Español and Français.
selected in Caption Mode.
The availability of captions depends on the
program being broadcasted.
x
x
x
x
Caption
(On-Screen Text Messages)
The Default setting follows the standards set by
the broadcaster.
■
Caption (Off / On): You can switch the
caption function on or off. If captions are
not available, they will not be displayed on
the screen.
CC
The Foreground and Background cannot be set
to have the same color.
You cannot set both the Foreground Opacity
and the Background Opacity to Transparent.
✎
The Caption feature doesn’t work in
Component, HDMI or PC modes.
■
Caption Mode: You can select the desired
caption mode.
Network (Network Type / Network Setup
/ Network Test / SWL(Samsung Wireless
Link) / SWL connect)
✎
The availability of captions depends on the
program being broadcast.
For details on set up options, refer to the “Network
Connection” instructions (p. 26).
Default / CC1~CC4 / Text1~Text4: (analog channels
only) The Analog Caption function operates in either
analog TV channel mode or when a signal is supplied
from an external device to the TV. (Depending on the
broadcasting signal, the Analog Caption function may or
may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 /
Text1~Text4: (digital channels only) The Digital Captions
function works with digital channels.
✎
Service1~6 may not be available in digital caption
mode depending on the broadcast.
English
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Features
General
¦ Picture In Picture (PIP)
■
Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting the
game mode.
t
PIP
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
the same mode.
✎
NOTE
Precautions and limitations for game mode.
x
O
MENUm
→ Setup → PIP → ENTERE
– To disconnect the game console and connect
another external device, set Game Mode to Off in
the setup menu.
✎
NOTE
For PIP sound, refer to the Sound Select
x
– If you display the TV menu in Game Mode, the
screen shakes slightly.
instructions.
If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
x
x
Game Mode is not available when the input source
is set to TV or PC.
x
x
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
While V-Chip or Internet@TV is in operation, the PIP
function cannot be used.
x
x
If Game Mode is On:
x
– Picture mode is set to Standard and Sound mode
PIP Settings
is set to Movie.
– Equalizer is not available.
Main picture
Sub picture
TV
■
BD Wise (Off / On): Provides the optimal picture
quality for SAMSUNG DVD, Blu-ray and Home Theater
products which support BD Wise. When the BD Wise is
set to On, the picture mode is automatically changed to
the optimal resolution.
Component, HDMI1/DVI,
HDMI2, HDMI3, HDMI4,
PC
■
■
PIP (Off / On): Activate or deactivate the PIP function.
✎
Available when connecting SAMSUNG products
that support BD Wise through a HDMI cable.
Air/Cable (Air / Cable): Select either Air or Cable as the
input source for the sub-screen.
■
■
Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■
■
■
Channel: Select the channel for the sub-screen.
Size (
Position (
sub-picture.
Õ
/
Ã
): Select a size for the sub-picture.
): Select a position for the
Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
Ã
/
–
/
—
/
œ
■
Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
Wireless Remote Control (Off / On)
Turn on/off or give permission to Samsung mobile phones/
devices.
Support Menu
You must have a Samsung Mobile phone/device which
supports Wireless Remote Control. For more details, refer
to each device's manual.
O
MENUm
→ Support → ENTERE
Legal Notice
✎
The Legal Notice may differ depending on the country.
English
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Self Diagnosis
Software Upgrade
✎
Self Diagnostic might take few seconds, this is part of
the normal operation of the TV.
Current Version
2010/01/18_000001
■
Picture Test: Use to check for picture problems.
Yes: If the test pattern does not appear or there is
noise in the test pattern, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
By USB
►
By Online
Alternative Software
----/--/--_------
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
U
Move
E
Enter
R
Return
Installing the Latest Version
■
Sound Test: Use the built-in melody sound to check for
sound problems.
■
By USB: Insert a USB drive
containing the firmware
TV Side Panel
✎
If you hear no sound from the TV’s speakers,
before performing the sound test, make sure
Speaker Select is set to TV Speaker in the
Sound menu.
upgrade file, downloaded
from “www.samsung.com.”
into the TV. Please be careful
not to disconnect the power
or remove the USB drive until
upgrades are complete. The
TV will be turned off and on
automatically after completing
the firmware upgrade. When
software is upgraded, video
✎
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the
sound is muted by pressing the MUTE button.
or
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the TV. Contact Samsung’s Call Center for
assistance (1-800-SAMSUNG).
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
USB Drive
and audio settings you have made will return to their
default settings. We advise you to to write down your
settings so that you can easily reset them after the
upgrade.
■
By Online: Upgrade the software using the Internet.
■
■
Signal Information: (Digital channels only) An HD
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
✎
First, configure your network. For detailed
procedures on using the Network Setup, refer to
the “Network Connection” instructions.
✎
If the internet connection doesn’t operate properly,
the connection may be broken. Please retry
downloading. If the problem persists, download by
USB and upgrade.
Troubleshooting: If the TV seems to have a problem,
refer to this description.
✎
If none of these troubleshooting tips apply, contact
the Samsung customer service center.
■
Alternative Software (backup): Displays the software
version downloaded through By Online. During the
software upgrading, When the Upgrade will discontinue
from last step, this function be activated.
Software Upgrade
Software Upgrade can be performed by network
connection or downloading the latest firmware from “www.
samsung.com,” to a USB memory device.
HD Connection Guide
Current Version - the software already installed in the TV.
Refer to this information when connecting external devices
to the TV.
✎
Software is represented as “Year/Month/Day_Version.”
Contact Samsung
View this information when your TV does not work properly
or when you want to upgrade the software. You can find
information regarding our call centers and how to download
products and software.
English
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless
connection.
¦ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
y
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat
5 cable. See the diagram below.
The Modem Port on the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
y
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected
to an external modem. Use a Cat 5 cable for the connection. See the diagram below.
The Modem Port on the Wall
TV Rear Panel
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer
(having DHCP server)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
LAN Cable (Not Supplied)
y
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall
outlet is attached to a modem or router elsewhere in your house.
TV Rear Panel
The LAN Port on the Wall
LAN Cable (Not Supplied)
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are
Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer.
✎
You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that
support DHCP also let you use Static IP addresses.
English
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Setup (Auto)
Network Setup (Manual)
Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
wired LAN connection automatically, follow these steps:
Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.
Getting the Network Connection Values
How to set up automatically
To get the Network connection values on most Windows
computers, follow these steps:
1. Connect your TV to your LAN as described in the
previous section.
1. Right click the Network icon on the bottom right of the
screen.
2. Turn on your TV, press the MENU button on your
remote, use the ▲ or ▼ button to select Setup, and
2. In the pop-up menu that appears, click Status.
then press the ENTER
E
button.
3. On the dialog that appears, click the Support tab.
3. Use the ▲ or ▼ button to select Network in the Setup
4. On the Support Tab, click the Details button. The
menu, and then press the ENTER
E
button. The
Network connection values are displayed.
Network screen appears.
How to set up manually
Network
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up
Network Type
: Wired
►
Network Setup
Network Test
automatically” procedure.
SWL(Samsung Wireless Link)
SWL connect
: Off
2. Set Internet Protocol Setup to Manual.
3. Press the ▼ button on your remote to go to the first
entry field.
U
Move
E
Enter
R
Return
4. Enter the IP Address, Subnet Mask, Gateway, and
DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.
4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen
5. When done, press the RETURN button on your remote.
appears.
6. Select Network Test to check the Internet connectivity.
Network Setup
Internet Protocol Setup
: Auto
►
IP Address
Subnet Mask
Gateway
:
:
:
DNS
: Auto
:
DNS Server
U
Move
E
Enter
R
Return
7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values
automatically.
9. Wait two minutes, and then press the RETURN button
on your remote. Acquiring an IP address can take up to
2 minutes depending on network conditions.
10. Follow the directions for Manual if the TV does not
automatically acquire a network connection.
English
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
¦ Connecting to a Wireless Network
To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration
below.
To use the SWL (Samsung Wireless Link) function, connect to the USB 1 (HDD) port.
✎
TV Side Panel
The LAN Port on
the Wall
Wireless IP sharer
(AP having DHCP server)
Samsung Wireless
LAN Adapter
or
LAN Cable (Not Supplied)
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung
recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.
✎
NOTE
You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
x
x
x
x
network.
Samsung’s Wireless LAN Adapter is sold separately. The SAMSUNG Wireless LAN Adapter is offered by select
retailers, Ecommerce sites and Samsungparts.com.
To use a wireless network, your TV must connect wirelessly to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
If you apply a security system other than the systems listed below, it will not work with the TV.
x
x
If you select the Pure High-throughput (Greenfield) 802.11N mode and set your AP's Security Encryption type to WEP,
TKIP or TKIPAES (WPS2Mixed), your Samsung TV will not support the connection in compliance with new Wi-Fi
certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
x
If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
x
x
Connection Methods: You can setup the wireless network connection six ways.
– Samsung Auto Configuration - For non-Samsung devices.
– PBC (WPS)
– Auto Setup (Using the Auto Network Search function)
– Manual Setup
– SWL (Samsung Wireless Link) - For Samsung devices only.
– Ad-Hoc
The Samsung Wireless LAN Adapter may not be recognized or work properly when connecting via a USB hub or via
a USB extension cable other than the one available from Samsung.
x
English
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice
The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN
Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN
Adapter using a USB cable in a place that is not affected by radio interference.
Method 1
Method 2
Connect using the USB right angle adapter
Connect via an extension cable
or
To connect the Samsung Wireless LAN Adapter using the USB
right angle adapter, follow these steps:
To reconnect the Samsung Wireless LAN Adapter using
the extension cable, follow these steps:
1. Connect the USB right angle adapter to the Samsung
✎
The Samsung Wireless LAN Adapter should be
installed in an interference-free area in order to
avoid interference between the adapter and tuner.
Wireless LAN Adapter.
2. Connect the other end of the right angle adapter to the USB
1 (HDD) port.
1. Connect the extension cable to the USB 1 (HDD)
port.
2. Connect the extension cable and Samsung Wireless
LAN Adapter.
3. Attach the Samsung Wireless LAN Adapter to the
back of the TV near the top, using double-sided
adhesive tape.
2. After 2 minutes, connect the Samsung Wireless LAN
Adapter to the TV. When the Samsung Wireless LAN
Adapter establishes a connection with your TV, a pop-up
window appears.
Network Setup (Samsung Auto
Configuration)
The Samsung Auto Configuration function lets you connect
your Samsung TV automatically to non-Samsung wireless
APs. If your non-Samsung AP does not support Samsung
Auto Configuraton, you must connect using one of the
other methods: PBC (WPS), auto configuration, or manual
configuration.
3. As soon as a connection is established, place the AP
parallel to the Samsung Wireless LAN Adapter and not
farther than 9 and 7/8s inches (25cm) from it.
4. Wait until the connection is automatically established.
✎
If Samsung Auto Configuration does not connect
your TV to your AP, a pop-up window appears on
the screen notifying you of the failure. If you want
to try using Samsung Auto Configuration again,
reset the AP, disconnect the Samsung Wireless
LAN Adapter and then try again from Step 1. You
can also choose one of the other connection
setup methods: PBC (WPS), auto, or manual.
✎
✎
To use this function, you must set SWL (Samsung
Wireless Link) to Off in the TV’s on-screen menu.
You can check for equipment that supports Samsung
How to set up using Samsung Auto Configuration
1. Place the AP and TV next to each other and turn them
on.
5. Place the AP in a desired location.
✎
✎
Because AP booting times vary, you may have
to wait approximately two minutes for your AP to
boot up.
✎
If the AP settings change or you install a new
AP, you must perform the Samsung Auto
Configuration procedure again, beginning from
Step 1.
Ensure the LAN cable is connected to the
WAN port of the AP during Samsung Auto
Configuration. If it is not connected, Samsung
Auto Configuration only confirms that the TV is
connected to the AP, but does not confirm it is
connected to the Internet.
English
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
How to set up automatically
Network Setup (PBC (WPS))
To set up the wireless connection automatically, follow these
steps:
How to set up using PBC (WPS)
1. Follow Steps 1 through 6 in the “How to set up using
If your router has a PBC (WPS) button, follow these steps:
1. Connect your TV to Samsung Wireless LAN Adapter as
PBC (WPS)” procedure.
2. Press the ▼ button to select Internet Protocol Setup,
described in the previous section.
and then press the ENTER
E
button. Press the ▲ or
2. Turn on your TV, press the MENU button on your
▼ button to select Auto, and then press the ENTER
E
remote, use the ▲ or ▼ button to select Setup, and
button.
then press the ENTER
3. Use the ▲ or ▼ button to select Network in the Setup
menu, and then press the ENTER button.
E
button.
3. Press the ▲ button to go to Select a Network, and
then press the ENTER
E
button. The Network function
E
searches for available wireless networks. When done, it
displays a list of the available networks.
4. On the Network screen, select Network Type.
5. Set Network Type to Wireless.
4. In the list of networks, press the ▲ or ▼ button to select
a network, and then press the ENTER
E
button.
6. Select Network Setup. The Network Setup screen
appears.
✎
If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.
Network Setup
Select a Network
Internet Protocol Setup
IP Address
: Not Selected
►
: Auto
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
:
Subnet Mask
Gateway
:
6. Press the ▲ or ▼ button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
:
DNS
: Auto
:
DNS Server
Network Setup
Security Key
PBC(WPS)
U
Move
E
Enter
R
Return
0 entered
7. Press the Red button on your remote.
0~9
Number
A
H
O
V
B
I
C
J
D
K
R
Y
E
L
F
M
T
G
N
U
8. Press the PBC (WPS) button on your router within 2
minutes. Your TV player automatically acquires all the
network setting values it needs and connects to your
network.
Lower case
Delete
P
W
Q
X
S
Z
B
Space
9. After the network connection is set up, press the
RETURN button to exit the Network Setup screen.
n
Move
E
Enter
R
Return
7. On the Security screen, enter your network’s Pass
Network Setup (Auto)
Phrase.
Most wireless networks have an optional security system
that requires devices that access the network to transmit
an encrypted security code called an Access or Security
Key. The Security Key is based on a Pass Phrase, typically
a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for
your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your
wireless network, you will have to enter the Pass Phrase
during the setup process.
✎
You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
8. To enter the Pass Phrase, follow these general
directions:
– Press the number buttons on your remote to enter
numbers.
– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
– Press the Red button to change case or display
symbols/characters.
– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTER
E
button.
– To delete the last letter or number you entered, press
the Green button on your remote.
English
30
Download from Www.Somanuals.com. All Manuals Search And Download.
9. When done, press the Blue button on your remote. The
Network Setup (Manual)
Network Connecting screen appears.
If the other methods do not work, you need to enter the
Network setting values manually.
10. Wait until the connection confirmation message is
displayed, and then press the ENTER
E
button. The
Network Setup screen re-appears.
Getting the Network Connection Values
11. To test the connection, press the RETURN button to
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
select Network Test, and then press the ENTER
E
button.
screen.
Network Setup (Ad-Hoc)
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
You can connect to a mobile device without an access point
through the “Samsung Wireless LAN Adapter” by using a
peer to peer network.
4. On the Support tab, click the Details button. The
Network settings are displayed.
✎
This function is available when SWL (Samsung
Wireless Link) is set to Off in the TV’s on-screen
menu.
How to set up manually
To enter the Network connection values manually, follow
these steps:
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 30).
1. Follow Steps 1 through 6 in the “How to set up using
PBC (WPS)” (p. 30).
2. Press the ▼ button to select Internet Protocol Setup,
and then press the ENTER
or ▼ button to select Manual, and then press the
ENTER button.
E
button. Press the ▲
2. Choose Select a Network. A list of devices/networks
appears.
E
3. While in the device list, press the Blue button on the
3. Press the ▼ button to go to the first entry field (IP
remote.
Address).
✎
The message Ad-hoc is a direct Wi-Fi
connection with cell phone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection? is displayed.
4. Use the number buttons to enter numbers.
5. When done with each field, use the ► button to move
successively to the next field. You can also use the other
arrow buttons to move up, down, and back.
4. Input the generated Network Name (SSID) and
6. Enter the IP Address, Subnet Mask, and Gateway
Security Key into the device you want to connect.
values.
7. Press the ▲ or ▼ button to go to DNS.
How to connect an existing Ad-hoc device
8. Press the ▼ button to go to the first DNS entry field.
1. Follow Steps 1 through 6 in the “How to set up using
Enter the numbers as above.
PBC (WPS)” (p. 30).
9. When done, press the ▲ button to go to Select a
2. Choose Select a Network. The Device/Network list
Network. Select your network, and then press the
appears.
ENTERE
button.
3. Select the device you want in the Device list.
10. Go to Step 4 in the “How to set up automatically” (p.
4. If security key is required, input the security key.
30), and follow the directions from that point on.
✎
If network doesn’t operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
English
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
SWL (Samsung Wireless Link)
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
procedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or password
to connect to the Internet, your TV may not be able to
connect to the Internet. If this is the case, you must enter
your ID or password when connecting to the Internet.
The internet connection may fail because of a firewall
problem. If this is the case, contact your Internet service
provider.
If you cannot connect to the Internet even after you have
followed the procedures of your Internet service provider,
please contact Samsung Electronics at 1-800-SAMSUNG.
This function lets you connect your TV to a Samsung device
(router, etc.) that supports PBC (WPS). You can connect the
TV to the device even if a sharer is not connected to the TV.
✎
✎
For the TV to use Internet@TV, the AP (access point)
must be connected to the wireless network.
If a Samsung Wireless LAN Adapter is connected to the
USB 2 port, the network may not operate normally. We
recommend connecting it to the USB 1 (HDD) port.
✎
Only sharers using the 2.4 Ghz band are supported.
Sharers using the 5 Ghz band are not supported.
SWL connect
You can directly connect the TV to a Samsung device that
supports PBC (WPS).
✎
✎
This function is available when SWL (Samsung
Wireless Link) is set to On.
To use the SWL (Samsung Wireless Link) function,
connect the Samsung Wireless LAN Adpater to the USB
1 (HDD) port.
How to connect using Samsung Wireless Link
To connect using Samsung Wireless Link, follow these steps:
1. Follow Steps 1 through 5 in the “How to set up using
PBC (WPS)” (p. 30).
2. Select SWL (Samsung Wireless Link) by using the ▼
button, and then press the ENTER
E
button to turn it
On.
3. Select SWL connect by using the ▼ button and then
press the ENTER button.
E
4. If the “Press the PBC button on the PBC(WPS)
supported device to connect within 120 seconds.”
message appears, press the PBC button on the device
to connect.
✎
For more information, refer to the wireless network
setup manual of the device to be connected.
5. If the TV connects properly to the device after the count
in the message box starts, then the message box
disappears automatically.
✎
If the connection fails, please retry after 2 minutes.
English
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Media Play
MediaPlay
Enjoy photos, music and/or movie files saved on
a USB Mass Storage Class (MSC) device.
MEDIA.P
Videos
O
MENU
m
→ Application → Content
View → Media Play → ENTER
E
SUM
Change Device
View Devices
E
Enter
R
Return
¦ Connecting a USB Device
1. Turn on your TV.
TV Side Panel
2. Connect a USB device containing photo, music and/or movie files to the USB 1
(HDD) or USB 2 port on the back or side panel of the TV.
3. When USB is connected to the TV, a popup window appears. Then you can
select Media Play.
✎
If an external USB device connected to the TV’s USB port draws an excessive
amount of current from the port, the message “USB Power overload” appears
on the screen. This is not a problem with the TV, which provides the standard
current from its USB ports, but a problem with the external device. Please
contact the manufacturer of the device for support.
or
USB Drive
¦ Connecting to your PC through a network
You can play pictures, music and videos saved on your PC TV through a network connection in the Media Play mode.
✎
If you want to use Media Play to play files saved on your PC over your TV, you should download “PC Share Manager”
and the users manual from “www.samsung.com.”
TV Side Panel
or
PC
LAN
Samsung
Wireless LAN
Adapter
External Modem
(ADSL/VDSL/Cable TV)
Wireless IP sharer
LAN Cable (Not Supplied)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
LAN Cable (Not Supplied)
LAN Cable (Not Supplied)
1. For more information on how to configure your network, refer to “Network Connection” (p. 26)
– You are recommended to locate both the TV and the PC in same subnet. The first 3 parts of the subnet address of the
TV and the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP
Address: 123.456.789.**)
2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager
Program will be installed.
– You can connect the TV to the PC directly without connecting it through a Sharer (Router).
English
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
✎
Functions that are not supported when connecting to a PC through a network:
The Background Music and Background Music Setting functions.
x
x
x
Sorting files by preference in the Photos, Music, and Videos folders.
The
�
(REW) or
µ
(FF) button while a movie is playing.
✎
✎
✎
Divx DRM, Multi-audio, embedded captions are not supported.
Samsung PC Share manager should be permitted by the firewall program on your PC.
When you use Media Play mode through a network connection, depending on the functions of the provided server:
The sorting method may vary.
x
x
x
The scene search function may not be supported.
The Play Continuously function, which resumes playing of a video, may not be supported.
– The Play Continuously function does not support multiple users. (It will have only memorized the point where the
most recent user stopped playing.)
The
�
(REW),
µ
(FF) or
�
(Pause) buttons may not work depending on the content information.
x
x
You may experience file stuttering while playing a video in Media Play through a network connection.
✎
✎
It might not work properly with unlicensed multimedia files.
Need-to-Know List before using Media Play
MTP (Media Transfer Protocol) is not supported.
x
x
x
x
The file system supports FAT16, FAT32 and NTFS.
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
x
Connect a USB HDD to the dedicated USB 1 (HDD) port.
x
x
x
x
x
x
x
Do not disconnect the USB device while it is loading.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360X8640 pixels.
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
If more than 2 PTP devices are connected, you can only use one at a time.
x
x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
x
If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
x
x
x
x
The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
x
English
34
Download from Www.Somanuals.com. All Manuals Search And Download.
¦ Screen Display
Move to the desired file using the up/down/right/left buttons and then press the ENTER
E
or
�
(Play) button. The file is
played.
✎
Supports the View Devices and Home in Media Play homepage.
Information:
Videos
/Movie 01.avi
Movie 01.avi
1/1 Page
You can ascertain the selected
file name and the number of files
and page.
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
File List Section:
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
You can confirm the files and
groups that are sorted by
category.
Sort List Section:
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Displays the sorting standard.
Movie 09.avi
Movie 10.avi
The sorting standard is
✎
different depending on the
contents.
SUM
Change Device
Select
Sorting
T
Tools
Operation Buttons
Red (Change Device): Selects a connected device.
B
Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
T
Tools: Displays the option menu.
Using the (REW) or (FF) button, file list can move to next or previous page.
�
µ
✎
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTER
2. Press the ◄/►/▲/▼ button to select the desired video in the file list.
3. Press the ENTER button or (Play) button.
– The selected file is displayed on the top with its playing time.
E
button in the Media Play menu.
E
�
– If video time information is unknown, play time and progress bar are not displayed.
– During video playback, you can search using the ◄ and ► button.
✎
In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
Supported Subtitle Formats
00:04:03 / 00:07:38
1/1
Movie 01.avi
y
Name
MPEG-4 time-based text
SAMI
File extension
.ttxt
Format
XML
.smi
HTML
SubRip
.srt
string-based
string-based
string-based
SubViewer
.sub
Micro DVD
.sub or .txt
E
Chaptering
L
Jump
T
Tools
R
Return
SUM
English
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
y
Supported Video Formats
Frame rate
(fps)
Bit rate
(Mbps)
File Extension Container
Video Codec
Resolution
Audio Codec
Divx 3.11 / 4.x / 5.1 / 6.0
XviD
1920x1080
1920x1080
1920x1080
1920x1080
800x600
6 ~ 30
6 ~ 30
8
8
*.avi
*.mkv
AVI
MKV
MP3 / AC3 / LPCM /
ADPCM / DTS Core
H.264 BP / MP / HP
MPEG4 SP / ASP
Motion JPEG
Divx 3.11 / 4.x / 5.1 / 6.0
XviD
6 ~ 30
25
8
6 ~ 30
6 ~ 30
8
1920x1080
1920x1080
1920x1080
1920x1080
800x600
6 ~ 30
8
6 ~ 30
8
MP3 / AC3 / LPCM /
ADPCM / WMA
*.asf
ASF
H.264 BP / MP / HP
MPEG4 SP / ASP
Motion JPEG
Window Media Video v9
H.264 BP / MP / HP
MPEG4 SP / ASP
XVID
6 ~ 30
25
8
6 ~ 30
6 ~ 30
8
*.wmv
*.mp4
ASF
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
6 ~ 30
25
25
8
WMA
6 ~ 30
MP4
6 ~ 30
MP3 / ADPCM / AAC
6 ~ 30
8
H.264 BP / MP / HP
MPEG4 SP / ASP
MPEG1
6 ~ 30
25
8
*.3gp
*.vro
3GPP
ADPCM / AAC / HE-AAC
AC3 / MPEG / LPCM
6 ~ 30
24 / 25 / 30
24 / 25 / 30
24 / 25 / 30
24 / 25 / 30
6 ~ 30
30
30
30
30
25
30
25
25
VRO
VOB
MPEG2
MPEG1
*.mpg
*.mpeg
PS
TS
MPEG2
AC3 / MPEG / LPCM / AAC
H.264
MPEG2
24 / 25 / 30
6 ~ 30
*.ts
*.tp
*.trp
AC3 / AAC / MP3 / DD+ /
HE-AAC
H.264
VC1
6 ~ 30
Other Restrictions
✎
NOTE
If there are problems with the contents of a codec, the codec will not be supported.
x
x
If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
x
x
If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder
Audio Decoder
Supports up to WMA 7, 8, 9, STD
WMA 9 PRO does not support 2 channel excess multi channel or
lossless audio.
•
•
Supports up to H.264, Level 4.1
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
•
•
•
XVID, MPEG4 SP, ASP :
•
WMA sampling rate 22050Hz mono is not supported.
–
Below 1280 x 720: 60 frame max
–
Above 1280 x 720: 30 frame max
•
•
•
GMC 2 over is not supported.
Only Samsung Techwin MJPEG is supported.
H.263 is not supported.
English
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing movie continuously (Resume Play)
If you exit the playing movie function, the movie can be played later from the point where it was stopped.
✎
If you press the ENTER
you want.
E
button (Chaptering) during playing the file, you can explore scene divided into 5 chapters
✎
If the index information is damaged or unsupported, you will not be able to use the Chaptering function.
1. Select the movie file you want to play continuously by pressing
00:04:03 / 00:07:38
1/1
the ◄ or ► button to select it from the file list section.
Movie 01.avi
2. Press the
�
(Play) / ENTER
E
button.
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎
✎
The Blue button is available when resuming play.
If the Continuous Movie Play Help function is set to On
in the Settings menu, a pop-up message will appear
when you resume play a movie file.
Play continuously
Resumes playing from the last viewed
scene.
SUM
Play continuously
E
Chaptering
L
Jump
T
Tools
R
Return
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTERE
button in the Media Play menu.
Playlist
3/15
I Love you
2. Press the ◄/►/▲/▼ button to select the desired Music file in
I Love You
Jhon
Jhon
the file list.
Music 1
No Singer
Music 2
No Singer
1st Album
Pop
3. Press the ENTER
E
button or
�
(Play) button.
2010
4.2MB
Music 3
No Singer
– During music playback, you can search using the ◄ and ►
buttons.
Music 4
01:10 / 04:02
No Singer
–
�
(REW) and
µ
(FF) buttons do not function during play.
Music 5
No Singer
✎
✎
Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
SUM
E
Pause
L
Jump
T
Tools
R
Return
If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Creating My Playlist
1. Press the ◄/►/▲/▼ button to select the tracks you want to add and press the TOOLS button.
2. Select Add My Playlist.
3. When the Add My Playlist menu appears, select New My Playlist.
✎
To add to an old play list, simply select the play list you want to add music to.
4. The newly created or updated playlist will be in the main Music page.
Playing My Playlist
Select the My Playlist folder and it will play automatically. Press the ▲ or ▼ button to select a different music file within the
play list.
English
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
Normal
Image1024.jpg
1024x768
2010/2/1
3/15
ENTERE
button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired photo in the
file list.
3. Press the ENTER
E
button or
�
(Play) button.
(Play) /
button on the remote control to start the slide
– While a photo list is displayed, press the
�
ENTER
E
show.
– All files in the file list section will be displayed in the slide show.
– During the slide show, files are displayed in order.
SUM
E
Pause
L
Previous/Next
T
Tools
R
Return
✎
✎
Music files can be automatically played during the Slide Show if
the Background Music is set to On.
The BGM Mode cannot be changed until the BGM has finished
loading.
¦ Playing Multiple Files
Playing selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
Videos
/Movie 01.avi
2 files selected
1/1
Page
2. Repeat the above operation to select multiple files.
Movie 01.avi
Movie 03.avi
Movie 02.avi
Movie 04.avi
✎
NOTE
Jan.10.2010
Jan.10.2010
The
c
mark appears to the left of the selected files.
x
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
To cancel a selection, press the Yellow button again.
x
x
Movie 05.avi
Movie 07.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
To deselect all selected files, press the TOOLS button
and select Deselect All.
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Movie 09.avi
3. Press the TOOLS button and select Play Selected Contents.
SUM
Change Device
Select
Sorting
T
Tools
Playing the video/music/photo file group
1. While a file list is displayed, move to any file in the desired group.
2. Press the TOOLS button and select Play Current Group.
¦ Media Play - Additional Functions
Sorting the file list
Press the Blue button in the file list to sort the files.
Category
Basic View
Operation
Videos
>
Music
>
Photos
>
Displays the whole folder. You can view the photo by selecting the folder.
Sorts and displays the file title in Symbol/Number/Alphabet/Special order.
>
>
>
Title
Sorts and displays the file by preference. You can change the file preference in the file
list section using the Green button.
Preference
>
>
>
Sorts and shows files by the latest date.
>
>
>
>
Latest Date
Earliest Date
Artist
Sorts and shows files by the earliest date.
Sorts the music file by artist in alphabetical order.
Sorts the music file by album in alphabetical order.
Sorts music files by the genre.
>
>
>
>
Album
Genre
Sorts music files by the mood. You can change the music mood information.
Sorts and shows photo files by month.
Mood
>
Monthly
English
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Videos/Music/Photos Play Option menu
During file playback, press the TOOLS button.
Category
Operation
Videos
>
Music
Photos
Title
You can move directly to another Title.
You can play movie and music files repeatedly.
Repeat Mode
>
>
Picture Size
(Mode1 / Mode2 / Original)
You can adjust the picture size to your preference.
>
Picture Setting
Sound Setting
Subtitle Setting
You can adjust the picture setting. (p. 16, 17, 18, 19)
You can adjust the sound setting. (p. 19, 20)
>
>
>
>
>
You can play the video with Subtitles. This function only works if the subtitles are the
same file name as the video.
>
>
Audio
You can enjoy video in one of supported languages as required. The function is only
enabled when stream-type files which support multiple audio formats are played.
Stop Slide Show /
Start Slide Show
You can start or stop a slide show.
>
Slide Show Speed
Background Music
Zoom
You can select the slide show speed during the slide show.
You can set and select background music when watching a slide show.
You can zoom into images in full screen mode.
>
>
>
>
>
>
Rotate
You can rotate images in full screen mode.
Home Background
Information
You can move the file to the Media Play desktop.
You can see detailed information about the played file.
>
>
Settings
Using the Setup Menu
■
■
Background Setting: Select to display the background you want.
Continuous Movie Play Help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■
Get DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web site
and register, you can download the VOD registration file. If you play the VOD registration using Media Play, the registration
is completed.
✎
For more information on DivX® VOD, visit “www.DivX.com.”
■
■
Get DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is displayed. If
you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
Information: Select to view information about the connected device.
English
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Anynet+
t
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
Anynet+
Device 1
Anynet+ Device
2, 3, 4
TV
Home Theater
HDMI Cable (Not Supplied)
Optical Cable (Not Supplied)
HDMI Cable (Not Supplied)
HDMI Cable (Not Supplied)
1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎
NOTE
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
x
on the Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
x
You can connect only one Home Theater.
x
x
x
x
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Device List
(device_name) MENU
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder)
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
¦ Setting Up Anynet+
O
MENU
Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
m
→ Application → Anynet+ (HDMI-CEC) → ENTERE
■
✎
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
✎
May not be enabled depending on the device.
¦ Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎
If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTER button. You can switch to the selected device.
The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the Application menu.
E
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
x
¦ Recording
You can make a recording of a TV Program using a Samsung recorder.
1. Select Recording.
✎
When there are more than two recording devices
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
x
the Device List.
✎
When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎
✎
You can record the source streams by selecting Recording: (device_name).
Pressing the (REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
�
✎
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
English
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
¦ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎
✎
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV’s Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎
NOTE
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
x
x
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
¦ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•
•
•
•
•
•
•
•
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Only one receiver (home theater) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (initial
setup), etc.)
•
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
•
•
Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
I want to exit Anynet+.
Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
Press the TOOLS button to display the Anynet+ menu and select a menu you want.
•
•
•
•
Select View TV in the Anynet+ menu.
Press the SOURCE button on the TV remote control and select a non- Anynet+ device.
Press
z, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates
only when a tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
Anynet+ device...” appears on the
screen.
•
•
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not play.
•
You cannot use the play function when Plug & Play (initial setup) is in progress.
The connected device is not
displayed.
•
•
•
•
•
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
•
•
•
If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
The TV Program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
English
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet@TV
¦ Getting Started with Internet@TV
Recommended
My Applications
Internet@TV brings useful and entertaining
contents and services directly from the web to
your TV.
@TV
INTERNET
by Date 1/1
O
MENU
m
→ Application → Content
View → Internet@TV → ENTER
E
Samsung Apps
Settings
Login
B
Mark as Favorite
Sort by
R
Return
Screen Display
Recommended
My Applications
TV Screen:
Displays the current channel.
Recommended Applications:
Displays the recommended service by
Samsung. You are not able to add or
delete a service in this list.
Information:
Displays notices, new
applications, and
by Date 1/1
advertisemevnts brought to
you by Samsung product
introductions.
Downloaded Applications:
Displays the downloaded applications
through the Samsung Apps.
Application service:
You can experience
various service by provided
samsung.
Samsung Apps Settings
Login
B
Mark as Favorite
Sort by
R
Return
Controls:
Internet@TV Settings:
Edit and configure applications
and Internet@TV settings.
•
•
•
•
Red (Login): To log in to to Internet@TV.
Green (Mark as Favorite): To mark the Applications as a favorite.
Blue (Sort by): To sort the applications.
B
R
Return: To return to the previous menu.
The color buttons may work differently depending on the application.
✎
✎
NOTE
Configure the network settings before using Internet@TV. For more information, refer to “Network Connection” (p.
x
26).
Unsupported fonts within the provider’s content will not display normally.
Slow responses and/or interruptions may occur, depending on your network conditions.
Depending on the region, English may be the only language supported for application services.
This feature is not available in some locations.
x
x
x
x
x
x
If you experience a problem using a application, please contact the content provider.
According to circumstances of the contents provider, an application’s updates or the application itself may be
discontinued.
Depending on your country’s regulations, some applications may have limited service or not be supported.
x
English
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Account Login
■
System Setup
For a application with multiple accounts, use ◄ and ► to
Ticker Autorun (Off / On): You can set Ticker Autorun
access the different accounts.
to come on when powering on the TV.
✎
The Ticker application provides useful News,
Weather, and Stock Market information. The
Ticker application on Internet@TV must be
downloaded to use this feature.
Login
User account :
admin
✎
Depending on your country, the Ticker application
may have a different service or not be supported.
Channel Bound Service (Off / On): Some channels
support applications as an Internet data service, allowing
you to access the Internet service while watching TV.
Password :
Create [0~9] Enter PIN
R
Cancel
✎
Only available if supported by the broadcaster.
Change the Service Lock password
✎
✎
For a more enjoyable application experience, register
and log in to your account.
✎
The default password set is “0-0-0-0.”
✎
If you forget the password you created, press the
following sequence of remote control buttons to
reset the password to “0-0-0-0”: POWER (off) →
MUTE → 8 → 2 → 4 → POWER (on).
For instructions on creating an account, refer to
Settings → Internet@TV ID → Create.
1. Press the Red button in the Internet@TV home page.
Reset: Resets Internet@TV settings to factory default
2. Select the desired User account, press the ENTER
E
settings.
button.
■
Internet@TV ID
✎
If you want to create an account, press the Red
button; then create account OSD window appear.
You can use this menu when creating and deleting
the account. You can control your account including
contents site’s account information.
3. After selecting User account, enter the Password using
the number button on the remote control.
Create: Create an account and link it with desired
service applications.
✎
When login succeeds, User account will be
displayed on the screen.
✎
NOTE
Maximum number of accounts is 10.
x
x
¦ Setting up Internet@TV
Maximum number of characters is 8.
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using the ▲ and ▼ buttons and
press the ENTER
E
button.
Settings
▪ System setup
▪ Ticker Autorun
: Off
▪ Internet@TV ID
▪ Channel Bound Service : Off
▪ Change the Service Lock password
▪ Reset
▪ Service Manager
▪ Properties
R
Return
English
44
Download from Www.Somanuals.com. All Manuals Search And Download.
How to create Internet@TV ID
5. Using the number buttons, enter the User account
and Password.
Before creating a User account, you should download
the application first on the Samsung Apps.
1. Using the ▲/▼/◄/► button, select Settings. Then
Password must be numbers only.
x
x
You can delete the entered character using the
PRE-CH button.
press the ENTER
2. Press the ▼ button to select Internet@TV ID, then
press the ENTER or ► button.
E
button.
Using the
�
(REW) or
µ
(FF) button, you
x
E
can select icon you want to enter in icon keypad
screen.
3. Select Create. The Keypad screen will appear.
6. Account created. You can use the services provided
by all users of your Samsung TV with a single
login by linking the users’ account to the TV ID. If
you want to register a service site ID, select Yes.
Service Site list will appear on the screen.
4. The keypad OSD will be displayed on the screen.
Using the Keypad
Pressing the – button on the remote while you are
using the Screen Keypad enables you to change the
text fields to lower case, upper case, numbers and
icons.
You can use this Screen Keypad in several Internet@
TV applications.
7. Select Register of the Service Site you want, then
press the ENTER
8. Using number buttons, enter your application site ID
and password. Then press the ENTER button.
9. Registered successfully. If you add another service
E
button.
E
Here is how to input characters.
4-1. For example, suppose that you want to input
site, select Yes. then press the ENTER
E
button,
“105Chang”.
go to step 5.
4-2. Press the – button on the remote twice to
change the input mode from lower case to
numbers.
10. When completed, select OK. Then press the
ENTER button.
Manager
– Service Site: Register login information for service
sites.
E
4-3. Press the 1, 0 and 5 button in numerical order.
4-4. Press the – button on the remote 3 times to
change the input mode from numbers to upper
case.
– Change Password: Change account password.
– Delete: Delete the account.
4-5. Press the 2 button on the remote 3 times to
■
■
Service Manager: Delete and lock applications installed
to Internet@TV.
input C.
4-6. Press the – button on the remote 3 times to
change the input mode from upper case to
lower case.
Lock: Lock the application.
✎
Accessing a locked application requires the
password.
4-7. Press buttons on the remote to input the rest
Delete: Delete the application.
of “Chang”. When done, press the ENTER
button.
E
Properties: Display information about Internet@TV. Use
the Check the speed of your internet connection
option to test your network connection.
English
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
¦ Using the Internet@TV service
Using the Samsung Apps by category
The following categories are available:
y
y
What’s New?: Displays newly registered applications.
Video: Displays various video media such as movies, TV
shows and short length videos.
Sports: Displays various sports media such as match
information, images and short length video.
Game: Displays various games such as sudoku and
chess.
Lifestyle: Includes various lifestyle media services such
as music, personal photo management tools and social
networking such as Facebook and Twitter.
Information: Includes various information services such
as news, stocks and weather.
Other: Includes other miscellaneous services.
My Page: Displays the application list and your cyber
cash balance.
Samsung Apps
Samsung Apps is a store for downloading applications to be
used on Samsung TV/AV equipment.
Users can enjoy a variety of contents such as videos, music,
photos, games, useful information etc. using the downloaded
applications.
y
y
y
Additional applications will be available in the future.
Samsung Apps
Featured
Most downloaded
Most recent
Name
What’s New?
Video
y
YouTube
TV store Test User002
You Tube
Free
Sports
y
y
Game
Lifestyle
Information
Other
✎
Starting in the middle of 2010 (US and Korea
only), you can purchase cyber-cash for buying
applications through tv.samsung.com.
My Page
Help
y
Help: If you have questions about Internet@TV, check
B
Login
Thumbnail View
Sort By
R
Return
this section first.
✎
Using the color buttons with the Samsung Apps.
Red (Login): To log in to the internet service.
x
x
B
Green (Thumbnail View): To change the view
mode.
Blue (Sort By): To sort the applications by
Featured, Most downloaded, Most recent or
Name.
x
x
R
Return: Moves to previous menu.
[ Legal Statement ]
Due to the various capabilities of products featuring the Samsung Internet@TV - Content Service, as well as limitations in
the available content, certain features, applications, and services may not be available on all devices or in all territories.
Some features on Internet@TV may also require additional peripheral devices or membership fees that are sold separately.
services and availability of content through Internet@TV are subject to change from time to time without prior notice.
English
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Yahoo
Internet@TV provides an integrated Internet and television experience powered by the Yahoo!® Widget
Engine. You can monitor financial stocks, share photos with friends and family, and track news and
weather all through the Yahoo!® Widget Engine.
YAHOO!
✎
✎
When running Internet@TV for the first time, you will be prompted to configure the basic settings.
Depending on your country’s regulations, some applications may have limited service or not be
supported.
Screen Display
y
Dock Mode
Welcome Banner: Shows your profile.
Hello John!
5:15 AM Mon January 19th
•
Blue (Viewport): Toggles between Viewport and
Overlay modes.
Viewport
Edit Snippet
•
Yellow (Edit Snippet): To edit snippets with a help
window.
In Viewport mode, the TV or video plays in a
✎
scaled-down area with graphics outside. In
overlay mode, the graphics are displayed on
top of the TV or video.
Dock: Displays your snippets.
•
Snippets are quick launch icons for your widgets.
Signed in as
John
WEATHER
Widget Gallery
FINANCE
PROFILE Widget and Widget Gallery cannot be
deleted.
✎
y
Sidebar Mode
FINANCE
Widget logo and Current menu.
My Stocks
To remove a stocks symbol, please select it
from the list below.
Contents List :
^DJI
The current selection is highlighted in blue.
Displays the current page and number of total pages.
^IXIC
YHOO
AAPL
INTC
AMZN
PAGE 1 OF 2
Controls:
•
Red: To close the widget. If you want to see the Dock mode,
press the YAHOO! button.
Green: To change the widget’s settings.
Yellow: To manage your snippets.
Add New Symbol...
Import Symbols From Yahoo!...
Display Format
About Yahoo! Finance...
B
Value
•
•
•
Blue: To size video to fit or display in full screen.
Some buttons may not be available with certain widgets.
✎
Editing Snippets in the Dock
1. Edit a snippet by selecting selecting it in the dock and pressing the Yellow button.
2. The snippet moves to the Second position and its tile slides up to show the following help text:
✎
Using the color buttons with the dock mode.
Red (Delete): To remove the widget.
x
✎
Deleted widgets can be restored from Widget Gallery.
Blue (Move): To rearrange snippets.
x
x
Yellow (Done): To exit the Edit Snippet menu.
English
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
y
From the Administrative Controls menu you can:
– Configure the Screen Saver timeout to avoid screen
burn-in.
– Create Owner PIN and set a Security Question to
control other profiles.
¦ PROFILE Widget
Set up user profiles through Profile Widget. You can set up
multiple profiles, each with its own list of widgets. Use the
Switch Profile option to switch to a different user profile.
– Create and configure a new profile with a unique set
of widgets.
– Delete an existing profile.
✎
There must be at least two registered profiles. For
instructions on adding a profile, refer to Administrative
Controls.
y
Use the Profile Settings option to customize and
protect your profile.
y
Sign into Yahoo!® from PROFILE Widget using your
Yahoo! ID.
– User profiles can be
customized with a unique
name and avatar (a picture
used to represent your
profile).
– Your profile’s name and
avatar are displayed in the
profile snippet in the dock.
– Protect your profile using
the Create Profile PIN
option.
– When setting up a new
PIN, you can set a Security
Question.
– If you have a Yahoo! ID, you can access personalized
content using Yahoo! TV widgets.
– You will be automatically signed-in to all installed
Yahoo! TV widgets with your profile’s Yahoo! ID.
– If you do not have a Yahoo! account, visit “www.
yahoo.com” to create one.
– You may not be able to log in with an ID created
through a Yahoo website in a country that does not
support Internet@TV.
About Profile Widget: Press the Green button to view
a brief description of Profile Widget, Copyright Policy,
Terms of Service, and Privacy Policy.
y
¦ Widget Gallery
y
The Profile Settings option limits access to the profile’s
widgets.
Use Yahoo!® Widget Gallery to add more widgets to your TV.
View available TV widgets in the following categories:
– If you forget your Profile PIN, answer your profile’s
Security Question.
– New widgets cannot be added to profiles with the
Limit Profile indicator enabled.
■
■
■
■
Featured: Displays
recommended widgets.
Latest: Displays the most
recent widgets.
✎
Owner PIN must be set to use this feature.
For instructions on setting Owner PIN, refer to
Administrative Controls.
All widgets: Displays all
widgets.
y
System Settings allows you to:
– Change your Location and Zip Code (US only) to
Categories: Displays all
tailor contents specific to your region.
widgets by category.
Featured
Latest
– Replay the tutorial that was shown during guided
setup.
– Restore Factory Settings resets all widget settings
✎
To install a widget, select Add
Widget to My Profile and
All widgets
Categories
press the ENTER
E
button.
and information.
The widget will be installed
and become available in the
dock.
✎
When you cannot run Restore Factory
Settings normally or you can not install/run
the specific widgets normally, press the remote
control buttons in the following sequence,
which resets the Yahoo Service: POWER (on)
→ MUTE → 9 → 4 → 8 → EXIT → POWER
(off) → POWER (on) → YAHOO! (If Yahoo
Service is displayed on the TV Screen, You
should stop the Yahoo Service using EXIT
button in advance).
■
Widget Gallery Settings: Press the Green button.
– About Yahoo! Widget Gallery...: You can view brief
information for the Widget Gallery, Copyright Policy,
Terms of Service, and Privacy Policy.
– TV Widget Software: Displays the current version of
the system software, and installed widgets.
– Create your own widgets through the Developer
Settings menu. For more information, visit our
English
48
Download from Www.Somanuals.com. All Manuals Search And Download.
¦ Troubleshooting for Internet@TV
Problem
Possible Solution
The Application content language may be different from the application user
interface language.
The ability to change the language depends on the service provider.
Some application contents only appear
in English. How can I change the
language?
Check with the service provider.
Refer to the help website for application service provider information.
Some application services do not work.
When a network error occurs, I can only If network connection doesn’t work, your service might be limited, as all
use the setting menu. functions except the setting menu are needed to connect to the internet.
All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other
intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or
services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized
by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any content or services displayed through this device.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO
SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES
AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF
QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT
WARRANT THAT THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR
SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE
LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY
FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A
RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and
Samsung makes no representation or warranty that any content or service will remain available for any period of time. Content and services are
transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality of this
disclaimer, Samsung expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content
or service made available through this device. Samsung may impose limits on the use of or access to certain services or content, in any case and
without notice or liability.
Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the
content or services should be made directly to the respective content and service providers.
English
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
AllShare
Message / Media / ScreenShare
Shows a list of mobile phones or connected devices which
have been set up with this TV for using the Message,
Media, or ScreenShare function.
O
MENU
AllShare → ENTER
m
→ Application → Content View →
E
✎
The Media function is available in all mobile devices
which support AllShare.
¦ About AllShare
AllShare connects your TV and compatible Samsung mobile
phones/ devices through a network. On your TV, you can
view call arrivals, SMS messages and schedules set on your
mobile phones. In addition, you can play media contents
including videos, photos and music saved on your mobile
phones or the other devices (such as your PC) by controlling
them on the TV via the network. Additionally, you can use
your TV for browsing web pages in your mobile phones.
■
■
Allowed / Denied: Allows/Blocks the mobile phone.
Delete: Deletes the mobile phone from the list.
✎
This function only deletes the name of the mobile
from the list. If the deleted mobile device is turned
on or trys to connect to the TV, it may appear on
the list again.
Using the Message Function
✎
contact the Samsung call center. Mobile devices may
need additional software installation. For details, refer to
each device’s user’s guide.
Using this function, you view call arrivals, SMS messages
and schedules set on the mobile phone through the alarm
window while watching TV.
✎
NOTE
To disable the alarm window, set Message to Off in
Setup of AllShare.
¦ Setting Up AllShare
x
If OK is selected, or if OK is not selected after the
message has appeared three times, the message
will be deleted. The message is not deleted from the
mobile phone.
x
Setup
■
Message (On / Off): Enables or disables the message
function (for call arrivals, SMS messages and schedules
set on your mobile phones).
The alarm window can be displayed while using
some applications such as Media Play etc. To view
the contents of a message, switch to TV viewing
mode.
x
x
■
Media (On / Off): Enables or disables the media
function. When the media function is on, it plays videos,
photos and music from a mobile phone or other device
that supports AllShare.
When a message from an unknown mobile phone is
displayed, select the mobile phone on the message
menu in AllShare and select Denied to block the
phone.
■
■
ScreenShare (On / Off): Enables or disables the
ScreenShare function for using mobile phone as a
remote control.
Message View
TV name: Sets the TV name so you can find it easily on
If a new SMS message arrives while you are watching
TV, the alarm window appears. If you click the OK
button, the contents of the message are displayed.
a mobile device.
✎
If you select User Input, you can type on the TV
using the OSK (On Screen Keyboard).
✎
You can configure the viewing settings for SMS
messages on your mobile phones. For the
procedures, refer to the mobile phone manual.
3/7
✎
Some types of characters may be displayed as
blank or broken characters.
Setup
Message
Media
: On
Message
Media
: On
ScreenShare
TV name
: On
: Home TV
ScreenShare
E
Select
R
Return
e
Exit
Setup
R
Return
English
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Arrival Alarm
Using ScreenShare Function
If a call arrives while you are watching TV, the alarm
window appears.
Using ScreenShare, you can browse various web contents
provided by the mobile phone. For example, the image
below displays an access page for contents on a mobile.
You can read the mobile’s files and view the phone book and
calendar on the TV. Also, in the phone book, you can make a
call to another person, or send to SMS.
Schedule Alarm
While you are watching TV, the alarm window appears to
display the registered event.
✎
You can configure viewing settings for schedule
contents on your mobile phones. For the
procedures, refer to the mobile phone manual.
✎
NOTE
You must have ScreenShare installed on your
x
x
x
Samsung Mobile phone/device to use this feature.
✎
Some special characters may be displayed as
blank or broken characters.
Doc Viewer can read files in doc format, but cannot
modify them.
The screen display may differ depending on the
connected device.
Using the Media Function
An alarm window appears informing the user that the media
contents (videos, photos, music) sent from a mobile phone
will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears.
If you press the RETURN or EXIT button when the alarm
window appears, the media contents are not played.
My Mobile
✎
NOTE
If the media function executes for the first time,
Contacts
Calendar
Doc Viewer
x
the warning popup window appears. Press the
ENTER button to select Allow, then you can use
E
Select
Return
E
Media function on that device.
Using your Samsung Phone to Operate Your TV
"Unknow Device 0" is requesting that the media file be allowed to play. If you
wish to allow the media file to be played at your device, please press "Allow",
otherwise press "Deny".
You can also change the setting (or resetting) of this feature at "AllShare
Setup".
Before you can use this feature, you must connect to
a Samsung mobile phone that supports ScreenShare
functions. When operating the TV with your mobile phone,
Warning: Please note that if your device is connected to unsecured or
unfamiliar network, unwanted or inappropriate contents might be played.
only the POWER,
y
,
z
and MUTE buttons
are supported.
If you are not sure about the network's identity or content's appropriateness,
we strongly recommend that you do not "Allow" the request to play.
✎
Even if you keep pressing down on a control button
(channel or volume) on the mobile phone, the value will
only go up or down by one unit.
Allow
Deny
To turn off the media contents transmission from
the mobile phone, set Media to Off in the AllShare
setup.
x
Contents may not be played on your TV depending
on their resolution and format.
x
x
x
The ENTERE
and ◄ / ► buttons may not work
depending on the type of media content.
Using the mobile device, you can control the media
playing. For details, refer to each mobile’s user’s
guide.
When you want to play media contents from
your PC, select the PC icon on the main display
of AllShare. Then the TV’s Media Play menu
automatically changes. For more detail information,
refer to “Media Play” (p. 33).
x
English
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Installing the Wall Mount
Attaching the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
Blanking Bracket
Preparing before installing Wall-Mount (46 ~ 55 inch TVs)
To install a wall-mount from another manufacturer, use the Holder-Ring.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎
NOTE
Standard dimensions for wall mount kits are shown in the table below.
x
x
x
x
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws that do not comply with the VESA standard screw specifications.
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
x
x
x
Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always use two people to mount the TV to a wall.
x
x
English
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Family inches
VESA Spec. (A * B)
Standard Screw
Quantity
75 X 75
100 X 100
200 X 100
200 X 200
400 X 400
600 X 400
800 X 400
1400 X 800
19~22
23~29
M4
M6
30~40
LCD-TV
4
46~55
57~65
70~80
80~
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
Assembling the Cables
Enclose the cables in the Cable tie so that the cables are not visible through
the transparent stand. Overly rigid or thick cables can damage input jacks
over long term use.
Cable Tie
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
physically fix the system when using it in a public place. The appearance and
locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for additional
information on proper use.
<TV Rear>
1
✎
Please find a “
K” icon on the rear of the TV. A kensington slot is beside
the “ ” icon.
K
To lock the product, follow these steps:
1. Wrap the Kensington lock cable around a large, stationary object such as
<Optional>
desk or chair.
2. Slide the end of the cable with the lock attached through the looped end
of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
✎
✎
✎
These are general instructions. For exact instructions, see the User manual supplied with the locking device.
The locking device has to be purchased separately.
The location of the Kensington slot may be different depending on the TV model.
English
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children
do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or
death. Follow all safety precautions provided in the included Safety Flyer with your TV. For added stability
and safety, you can purchase and install the anti fall device as described below.
The TV-Holder Kit (Sold Separately):
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw
appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size M4xL20 wood screw.
TV-Holder (BN96-15753A)
Screw 1 (M6xL16)
Screw 2 (M8xL19)
(32 ~ 40 inch TVs)
(46 ~ 55 inch TVs)
Installing the TV-Holder
1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in
the TV-Holder Kit (1 or 2) that is designated for your TV.
✎
Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.
1
2
2. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.
✎
If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a
molly to anchor the screw.
3. Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is fixed. See the illustrations below.
✎
✎
Install the TV close to the wall so that it does not fall.
When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety
purposes.
✎
✎
Check the cord occasionally to make sure it is secure.
Before moving the TV, separate the connected cord first.
4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a professional installer.
To purchase the TV-Holder Kit, contact Samsung Customer Care
– In the United States: 1-800-SAMSUNG (1-800-726-7864)
– In Canada: 1-800-SAMSUNG (1-800-726-7864)
English
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips
Issues
Solutions and Explanations
Poor picture
First of all, please perform the Picture Test and confirm that your TV is properly displaying the test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 25)
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as it
did in the store.
•
If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or
Component cables to deliver HD (high definition) picture quality.
•
•
Cable/Satellite subscribers: Try HD stations from the channel line up.
Antenna connection: Try HD stations after performing Auto program.
Many HD channels are up scaled from SD(Standard Definition) contents.
Adjust the Cable/Sat box video output resolution to 1080i or 720p.
✎
•
•
The picture is distorted: macro block error,
small block, dots, pixelization.
Compression of video contents may cause picture distortion, especially in fast moving pictures such
as sports and action movies.
•
•
Low signal level can cause picture distortion. This is not a TV problem.
Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital
TV.
Color is wrong or missing.
•
If you’re using Component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness.
•
•
•
Adjust the Picture options in the TV menu. (go to Picture mode / Color / Brightness / Sharpness)
(p. 16)
Adjust Energy Saving option in the TV menu. (go to MENU – Picture – Eco Solution –
Energy Saving) (p. 16)
Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
(p. 19)
There is a dotted line on the edge of the
screen.
•
•
If the picture size is set to Screen Fit, change it to 16:9 (p. 18).
Change cable/satellite box resolution.
The picture is black and white.
•
If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
freezes or is distorted or delayed.
•
•
If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box
reboots. It may take up to 20 minutes)
Set the output resolution of the cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (p. 25)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
•
Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.
The picture is good but there is no sound.
•
•
Set the Speaker Select option to TV Speaker in the Sound menu (p. 20).
If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
•
If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
If you are using a DVI to HDMI cable, a separate audio cable is required.
If your TV has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by reconnecting the device’s power cable.
•
•
•
The speakers are making an inappropriate
noise.
•
•
Check cable connections. Make sure a video cable is not connected to an audio input.
For antenna or Cable connections, check the signal strength. Low signal level may cause sound
distortion.
•
Perform the Sound Test as explained above.
English
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Issues
Solutions and Explanations
No Picture, No Video
The TV won’t turn on.
•
•
•
Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “Remote control does not work” below.
The TV turns off automatically.
•
•
•
•
Ensure the Sleep Timer is set to Off in the Setup menu (p. 21).
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
There is no picture/video.
•
•
Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections
to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.
•
•
•
Make sure your connected devices are powered on.
Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
•
•
Make sure the coaxial cable is connected securely.
Please try Auto Program to add available channels to the channel list. Go to MENU - Channel -
Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu.
There are 3 options (STD, HRC and IRC) (p. 14).
•
Verify the Antenna is positioned correctly.
No Caption on digital channels.
•
•
Check Caption Setup menu. Try changing Caption Mode Service1 to CC1 (p. 23).
Some channels may not have caption data.
The picture is distorted: macro block error,
small block, dots, pixelization.
•
•
Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
A low signal can cause picture distortion. This is not a TV problem.
PC Connection
A “Mode Not Supported” message
appears.
•
•
•
Set your PC’s output resolution so it matches the resolutions supported by the TV (p. 12).
This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
If you are using an HDMI connection, check the audio output setting on your PC.
“PC” is always shown on the source list,
even if a PC is not connected.
The video is OK but there is no audio.
Network Connection
The wireless network connection failed.
•
•
•
The Samsung Wireless USB dongle is required to use a wireless network.
Make sure the Network Connection is set to Wireless (p. 28).
Make sure the TV is connected to a wireless IP sharer (router).
Software Upgrade over the network fails.
Others
•
•
Try network test in Setup menu (p. 23).
If you have latest SW version, SW upgrade will not proceed.
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
•
Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates
that the set-top-box has a grounding issue. Replace the Component video cables with an HDMI
connection.
The picture won’t display in full screen.
The remote control does not work.
•
•
•
HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your
TV.
Adjust the picture size options on your external device or TV to full screen.
•
•
•
Replace the remote control batteries with the poles (+/–) in the right direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
•
Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the
SAMSUNG TV code.
English
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Issues
Solutions and Explanations
A “Mode Not Supported” message
appears.
•
Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 12 of this manual.
Caption on TV menu is greyed out.
•
•
Caption can not be selected in the TV menu when connected via HDMI or Component (p. 23).
Caption must be activated on the external device (p. 23).
There is a plastic smell from the TV.
•
•
This smell is normal and will dissipate over time.
The TV Signal Information is unavailable
This function is only available with digital channels from an Antenna / RF/Coax connection (p. 25).
in the Self Diagnostic Test menu.
The TV is tilted to the side.
•
•
Remove the base stand from the TV and reassemble it.
The channel menu is greyed out
(unavailable).
The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
•
If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play → ENTER
E
(p. 8).
You have intermittent loss of audio or
video.
•
•
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
degree connectors.
The PIP menu is not available.
•
•
•
PIP functionality is only available when you are using a HDMI, PC or Component source.
You see small particles when you look
closely at the edge of the frame of the TV.
This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears on
the screen.
Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).
✎
This TFT LCD panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
¦ Storage and Maintenance
Do not spray water or a cleaning agent directly onto the
product. Any liquid that goes into the product may cause a
failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small amount
of water.
English
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
License
TheaterSound, SRS and the
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are
registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc.
Product Includes software. © DTS, Inc. All Rights Reserved.
DivX Certified to play DivX video up to HD 1080p, including premium content.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand
(VOD) content.
To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. Pat. 7,295,673;
7,460,688; 7,519,274
Open Source License Notice
In the case of using open source software, Open Source Licenses are available on the product menu.
Open Source License Notice is written only English.
English
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
Model Name
-20˚ ~ 20˚
LN32C650
32 inches
(31.5 inches measured diagonally)
LN40C650
Screen Size
(Diagonal)
40 inches
(40.0 inches measured diagonally)
Sound
(Output)
10 W X 2
Dimensions (WxDxH)
Body
31.1 X 3.1 X 20.1 inches
(789.2 X 77.8 X 509.9 mm)
31.1 X 9.4 X 21.9 inches
(789.2 X 240.0 X 555.9 mm)
38.4 X 3.2 X 24.2 inches
(976.2 X 80.4 X 614.9 mm)
38.4 X 10.0 X 26.0 inches
(976.2 X 255.0 X 659.3 mm)
With stand
Weight
Without Stand
With Stand
20.3 Ibs (9.2 kg)
26.0 Ibs (11.9 kg)
31.5 Ibs (14.3 kg)
39.0 Ibs (17.7 kg)
Model Name
LN46C650
LN55C650
Screen Size
(Diagonal)
46 inches
(46.0 inches measured diagonally)
55 inches
(55.0 inches measured diagonally)
Sound
(Output)
10 W X 2
15 W X 2
Dimensions (WxDxH)
Body
43.6 X 3.2 X 27.2 inches
(1108.6 X 80.3 X 689.7 mm)
43.6 X 10.8 X 28.9 inches
(1108.6 X 275.0 X 734.5 mm)
51.2 X 3.4 X 31.5 inches
(1301.6 X 85.3 X 801.2 mm)
51.2 X 12.0 X 33.3 inches
(1301.6 X 305.0 X 845.3 mm)
With stand
Weight
Without Stand
With Stand
39.9 Ibs (18.1 kg)
48.3 Ibs (21.9 kg)
61.9 Ibs (28.1 kg)
72.1 Ibs (32.7 kg)
✎
✎
✎
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For information about power supply, and more about power consumption, refer to the label attached to the product.
English
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Dimensions
■
Front view / Side view`
7
1
2
5
3
6
8
4
(Unit: inches)
Model name
LN32C650
LN40C650
LN46C650
LN55C650
1
2
3
4
5
6
7
8
31.1
38.4
43.6
51.2
27.5
34.9
40.1
47.7
15.5
19.7
22.6
26.9
17.5
20.5
21.7
22.8
20.1
24.2
27.2
31.5
21.9
26.0
28.9
33.3
3.1
3.2
3.2
3.4
9.4
10.0
10.8
12.0
■
Jack panel detail / Rear view
5
4
1
6
2
3
(Unit: inches)
Model name
LN32C650
LN40C650
LN46C650
LN55C650
1
2
3
4
5
6
9.3
2.0
2.7
3.7
3.8
3.8
4.0
4.0
4.1
20.9
27.6
31.8
39.3
7.9
7.9
13.2
16.1
20.5
7.9
7.9
15.7
15.7
15.7
15.7
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the
dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
© 2010 Samsung Electronics America, Inc
English
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
F
R
AllShare
Amplify
Antenna
Anynet+
AUDIO OUT
Auto Adjustment
Auto Volume
50
19
14
40
11
19
20
FAV.CH button
Film Mode
Fine Tune
Flesh Tone
Frequency
7, 14
18
16
17
12
Receiver
Recording
Remote Control
Repeat Mode
RGB Only Mode
Rotate
42
41
7
39
17
39
H
S
HDMI
Home Theater
9, 40
11, 40
B
Select All
Self Diagnosis
Sharpness
Signal Information
Sleep Timer
Slide Show
Software Upgrade
Source List
Speaker Select
Specifications
Standby mode
Symbol
15
25
16
25
21
38
25
13
20
59
5
Background Music
Balance L/R
Basic View
Batteries
Black Tone
39
19
38
7
17
52
16
I
Installation Space
Internet@TV
2
43
Blanking Bracket
Brightness
L
Language
License
23
58
C
Cable Tie
Change PIN
Channel Menu
Clock
Color Tone
Component
Connecting to a PC
Connecting to an Audio Device
4, 53
22
14
20
18
10
12
11
3
M
Media Play
Melody
Memorizing Channels
Menu Transparency
Mono
33
24
14
24
20
37
T
Timer
Title
Tools
Troubleshooting
TV Speaker
21
38
3
55
20
Music
D
N
U
DIGITAL AUDIO OUT
DivX® VOD
D-sub
Dynamic
Dynamic Contrast
11, 40
39
Navigate
Network Connection
Network Setup
13
26
27
USB Drive
25, 33
12
16
17
V
O
Video Formats
Videos
Volume
36
35
5
ON/OFF button
Optimal resolution
7
12
E
Eco Sensor
Edit Name
Editing Channels
Energy Saving
Equalizer
16
13
15
16
19
20
W
P
Wall Mount
Warm
White Balance
Widget
52
18
18
48
Password
Photos
Picture Size
PIP (Picture in Picture)
Plug & Play
44
38
18, 39
24
External Speaker
8
Power Indicator
5
English
61
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally
left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
|