Samsung DVD Recorder DVD R125 User Guide

Instruction Manual

0/R121

DVD-R125

AK68-00842A-01

Download from Www.Somanuals.com. All Manuals Search And Download.

Exterior interference such as lightning and static

electricity can affect normal operation of this recorder.

If this occurs, turn the recorder off and on again with

the STANDBY/ON button, or disconnect and then

reconnect the AC power cord to the AC power outlet.

The recorder will operate normally.

Precaution

Be sure to remove the disc and turn off the recorder

after use.

Disconnect the AC power cord from the AC outlet

when you don’t intend to use the recorder for long

periods of time.

Important Safety Instructions

Read these operating instructions carefully before using

the unit. Follow all the safety instructions listed below.

Keep these operating instructions handy for future

reference.

Clean the disc by wiping in a straight line from the

inside to the outside of the disc.

1) Read these instructions.

2) Keep these instructions.

Maintenance of Cabinet

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

For safety reasons, be sure to disconnect the AC power

cord from the AC outlet.

Do not use benzene, thinner, or other solvents for

cleaning.

7) Do not block any ventilation openings, Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two

blades with one wider than the other. A grounding-

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. if the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Wipe the cabinet with a soft cloth.

Disc Handling

Use discs with regular

shapes. If an irregular disc

(a disc with a special shape)

is used, this DVD recorder may be damaged.

Holding discs

Avoid touching the surface of a

disc where recording is performed.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, the point where they exit from the

apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

DVD-RAM, DVD-RW and DVD-R

12) Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Clean with an optional DVD-

RAM/PD disc cleaner (LF-

K200DCA1 where available).

Do not use cleaners or cloths

for CDs to clean DVD-

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

RAM/DVD-RW/DVD-R discs.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

DVD-Video, Audio CD

Wipe off dirt or contamination on the disc with a soft

cloth.

Cautions on handling discs

Handling Cautions

Before connecting other components to this recorder,

be sure to turn them all off.

Do not move the recorder while a disc is being

played, or the disc may be scratched or broken, the

recorder’s internal parts may be damaged.

Do not put a flower vase filled with water or any small

metal objects on the recorder.

Be careful not to put your hand into the disc tray.

Do not place anything other than the disc in the disc

tray.

Do not write on the printed side with a ball-point pen

or pencil.

Do not use record cleaning sprays or antistatic.

Also, do not use volatile chemicals, such as benzene

or thinner.

Do not apply labels or stickers to discs. (Do not use

discs fixed with exposed tape adhesive or leftover

peeled-off stickers.)

Do not use scratch-proof protectors or covers.

Do not use discs printed with label printers available

on the market.

Do not load warped or cracked discs.

English -

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Storage

Using CD-R/RW

Be careful not to harm the disc because the data on

these discs is highly vulnerable to the environment.

●

Use a 700MB(80 minutes) CD-R/RW disc. If possible,

do not use a 800MB(90 minutes) or above disc, as

the disc may not play back.

●

Do not keep under direct sunlight.

Keep in a cool ventilated area.

Store vertically.

Keep in a clean protection jacket.

If you move your DVD recorder suddenly from a cold

place to a warm place, condensation may generate

on the operating parts and lens and cause abnormal

disc playback. If this occurs, remove the disc and

wait for one to two hours with the power on before

atttempting playback.

If the CD-R/RW disc was not recorded as a closed

session, you may experience a delay in the early

playback time, all recorded files may not play.

Some CD-R/RW discs may not be playable with this

unit, depending on the device which was used to

burn them. For contents recorded on CD-R/RW

media from CDs for your personal use, playability

may vary depending on contents and discs.

Using MPEG4 disc

Disc Specifications

●

Disc : CD-R/RW, DVD-R/RW/RAM

MPEG4 File with following extensions can be played.

: .avi, .divx, .AVI, .DIVX

MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x

DivX-Pro (without QPEL and GMC)

Available Audio Format : “MP3”, “MPEG”, “WMA”,

“LPCM”, “AC3”

DVD-Video

●

A digital versatile disc (DVD) can contain up to

135-minutes of images, 8 audio languages and 32

subtitle languages. It is equipped with MPEG-2

picture compression and Dolby digital surrounding,

allowing you to enjoy vivid and clear theater quality

images in the comfort of your own home.

Supported subtitle file formats: .smi, .srt, .sub, .psb, .txt, .ass

DVD-R Disc Playback and Recording

●

When switching from the first layer to the second

layer of a dual-layered DVD Video disc, there may be

momentary distortion in the image and sound.

This is not a malfunction of the unit.

Once a DVD-R/RW recorded in Video Mode is

finalised, it becomes DVD-Video.

●

Once a DVD Recorder in Video Mode is finalised, it

becomes DVD-Video.

You can record onto the available space on the disc

and perform editing functions such as giving titles to

discs and programmes and erasing programmes

before finalising.

●

When programming is erased from a DVD-R, that

space does not become available. Once an area on a

DVD-R is recorded on, that area is no longer a

vailable for recording, whether the recording is

erased or not.

Audio CD

●

An audio disc on which 44.1kHz PCM Audio is

recorded

●

It takes about 30 seconds for the unit to complete

recording management information after recording

finishes.

This product optimizes the DVD-R for each recording.

Optimizing is carried out when you start recording

after inserting the disc or turning on the unit.

Recording onto the disc may become impossible if

optimizing is carried out too many times.

Playback may be impossible in some cases due to

the condition of recording.

This unit can play back DVD-R discs recorded and

finalised with a Samsung DVD video recorder. It may

not be able to play some DVD-R discs depending on

the disc and the condition of the recording.

●

Plays CD-DA format audio CD-R and CD-RW discs.

The unit may not be able to play some CD-R or CD-

RW discs due to the condition of the recording.

CD-R/RW

●

MP3 CD-R/RW

●

Only CD-R discs with MP3 files recorded with

ISO9660 or JOLIET format can be played back

Only MP3 files with the ".mp3", ".MP3" extension can

be used.

For MP3 files recorded with a VBR(Variable Bit

Rates), from 32 Kbps to 320 Kbps, the sound may

cut in out.

Playable bitrate range is from 56Kbps to 320Kbps.

The unit can handle a maximum of 500 files and 100

folders.

DVD-RW Disc Playback and Recording

●

Recording and playback can be performed on DVD-

RW discs in both the Video and VR Modes.

Once a DVD-RW recorded in both the Video and VR

Modes is finalised, you cannot perform addtional

recording.

●

Once a DVD-RW recorded in Video Mode is finalised,

it becomes DVD-Video.

In both modes, playback can be performed before

and after finalisation, but additional recording,

deleting and editing can not be performed after

finalisation.

If you want to record the disc in VR Mode and then

record in V Mode, be sure to execute Format.

Be careful when executing Format because all the

recorded data may be lost.

JPEG CD-R/RW

●

Only JPEG files with the ".jpg", ".JPG" extension can

be used.

The unit can handle a maximum of 500 files and 100

folders.

Maximum size of progressive JPEG is 3M pixels.

MOTION JPEG is not supported.

●

4- English

Download from Www.Somanuals.com. All Manuals Search And Download.

●

A DVD-RW blank disc is initialized to VR Mode when

first initialized.

● Use of poor quality DVD-RAM/DVD-RW/DVD-R discs

may cause following unexpected problems including,

without limitation, recording failure, loss of recorded

or edited materials or damage to the recorder.

DVD-RW (VR mode)

- This is a format that is used for recording data on a

DVD-RAM or DVD-RW disc.

You can record multiple titles, edit, delete, partial

delete, create a playlist, etc.

Do not use the following discs!

- A disc that is recorded in this mode may not be

played by existing DVD Recorder.

DVD-RW (Video mode)

●

LD, CD-G, CD-I, CD-ROM, DVD-ROM, DVD+R and

DVD+RW discs should not be used in this product.

[Note]

●

- This is a format that is used for recording data on a

DVD-RW or DVD-R disc. The disc can be played

by existing DVD Recorder once it has been

finalised.

- If a disc that has been recorded in Video Mode by a

different maker’s recorder but has not been

finalised, it cannot be played or additionally be

recorded by this recorder.

Disc types that can be played : CD/CD-R/CD-

RW/MP3/JPEG/DVD-Video/DVD-RAM/DVD-RW/

DVD-R. For a DVD-R/DVD-RW disc, which has been

recorded in Video Mode on another component, it

can play only when finalised.

Some commercial discs and DVD discs purchased

outside your region may not be playable with this

product. When these discs are played, either “No disc."

or "Please check the regional code." will be displayed.

If your DVD-RW disc is an illegal copy or is not in

DVD video format, it may also not be playable.

●

DVD-RAM Disc Playback and Recording

●

Ensure that the recording mode is set to VR mode.

Otherwise, this product will not be able to play the

recording.

● We recommend using one of the discs in the

table as they have been confirmed to be

compatible with this unit. Other discs may not

perform correctly.

●

You cannot play a DVD-RAM in most DVD components

due to compatibility issues.

Only DVD-RAM standard Version 2.0. discs can be

played in this unit.

DVD-RAM recorded on this unit may not work with other

DVD components. To determine compatibility with these

DVD-RAM discs, refer to the user’s manual for the DVD

recorder.

For cartridge type DVD-RAM discs, remove the cartridge

and use the disc only.

Media

Disc

TDK

SPEED

Beall

DVD-R

That’s

Maxell

Panasonic

TDK

●

Maxell

Optodisc

Radius

Verbatim

Maxell

Fujifilm

COPY PROTECTION

DVD-RW

●

Many DVD discs are encoded with copy protection.

Because of this, you should only connect your DVD

recorder directly to your TV, not to a VCR.

Connecting to a VCR results in a distorted picture

from copy-protected DVD discs.

This product incorporates copyright protection

technology that is protected by methods claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorised by Macrovision

Corporation, is intended for home and other limited

viewing uses only unless otherwise

DVD-RAM

TDK

Panasonic

●

Disc

Maximum no. of recordings by disc type

DVD-RAM 100,000

DVD-RW 1,000

DVD-R

●

We take no responsibility and offer no compensation

for any recording failure, loss of recorded or edited

material and/or damage to the recorder arising from

usage of unrecommended discs.

authorised by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

Protection

This DVD Recorder can allow you to protect the

contents of your discs, as described below.

●

Programme-protected: See page 71

“Locking(Protecting) a Title”

●

Disc-protected: See page 83 “Disc Protection”

●

DVD-RAM/DVD-RW/DVD-R discs that are

incompatible with the DVD-VIDEO format cannot be

played with this product.

● For more information on DVD recording compatibility,

consult your DVD-RAM/DVD-RW/DVD-R

manufacturer.

English -

Download from Www.Somanuals.com. All Manuals Search And Download.

Case 2 : Connecting to a stereo amplifier

Contents

with AV output jacks..........................................20

Case 3: Connecting to an AV amplifier with a digital

output jack ..........................................................20

Connecting HDMI/DVI to a TV..................................21

Case 1 : Connecting to a TV with HDMI Jack ...............21

Case 2 : Connecting to a TV with DVI Jack ..................21

Connecting to AV 3 IN, DV input jack...................22

Case 1 : Connecting a VCR, Set-Top Box(STB), DVD

recorder or Camcorder to the AV 3 IN jacks...22

Getting Started

Warning........................................................................2

Precaution ...................................................................3

Important Safety Instructions.............................................3

Handling Cautions..............................................................3

Maintenance of Cabinet.....................................................3

Disc Handling .....................................................................3

Disc Storage.......................................................................4

Disc Specifications .............................................................4

General Features........................................................8

Before reading the user’s manual .........................9

How to use the DVD Recorder.................................9

Unpacking .................................................................11

Accessories.......................................................................11

Preparing the Remote Control.........................................11

Setting the Remote Control .............................................11

Description................................................................13

Front Panel.......................................................................13

Front Panel Display..........................................................13

Rear Panel........................................................................14

Tour of the Remote Control.............................................15

Case 2 : Connecting a Camcorder to the DV IN jack ...22

System Setup

On-Screen Menu Navigation..................................23

Plug & Auto Setup ...................................................24

Setting the Clock......................................................25

Presetting Channels with

the Auto Setup function..........................................26

Presetting Channels with

the Manual Setup function.....................................27

Setting up the Language Options.........................28

EP Mode Time Setting.............................................29

Automatic Chapter Creation ..................................30

Setting up the Front Display Options...................31

Setting up NICAM Options.....................................31

DivX(R) Registration................................................32

Setting up the Audio Options ................................32

Audio Options...................................................................33

Setting up Video Output Options..........................33

Setting up the Progressive scan...........................34

Canceling the Progressive scan ...........................35

Setting up the Display(Video) Options.................35

Display(Video) Options....................................................36

Output selection ...............................................................36

Setting up the Parental Control.............................37

If you forgot your password.............................................37

About the Rating Level ....................................................38

About the Change Password ..........................................38

Connecting & Setting Up

Quick Overview........................................................16

Connecting the DVD-Recorder .................................17

Additional connections...........................................17

Other type of connecting the Video output cable ...18

Case 1 : Connecting to a Video (Composite)

output jack.........................................................18

Case 2 : Connecting to an S-Video output jack.............19

Case 3 : Component Video output jacks........................19

Other type of connecting the Audio output cable..20

Case 1 : Connecting to your TV......................................20

6- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Zooming-In........................................................................59

Using Bookmarks.............................................................59

Using Markers ..................................................................60

Playing an Audio CD/MP3 .....................................61

Playing an Audio CD (CD-DA)/MP3 ...............................61

Playing a Picture......................................................65

Playing an MPEG4...................................................66

Playing the Title List................................................67

Recording

Before Recording.....................................................39

Recordable discs..............................................................39

Recording Formats ..........................................................40

Recording Mode...............................................................40

Unrecordable video..........................................................40

About INFO Key...............................................................41

Checking the available disc space (Disc Information)...41

Recording the current TV programme you are

watching ....................................................................41

Recording from external equipment you are

Editing

Basic Editing (Title List) ...................................................70

Renaming(Labeling) a Title..............................................70

Locking(Protecting) a Title ...............................................71

Deleting a Title .................................................................71

Deleting a Section of a Title ............................................72

Advanced Editing (Playlist) .............................................74

Creating a Playlist ...........................................................74

Playing Entries in the Playlist .........................................75

Renaming a Playlist Entry ...............................................76

Editing a Scene for the Playlist .......................................77

Copying a Playlist Entry to the Playlist ...........................80

Deleting a Playlist Entry from the Playlist.......................81

Disc Manager ..............................................................82

Editing the Disc Name.....................................................82

Disc Protection .................................................................83

Formatting a Disc.............................................................83

Delete All Title Lists..........................................................84

Finalising a disc................................................................85

Unfinalising a disc (V/VR mode) ....................................86

watching ....................................................................43

Copying from a Camcorder ...................................44

Making a One Touch Recording (OTR)................45

Making a Timer Recording.....................................46

Flexible Recording (for Timer recording only) ...47

Editing the Scheduled Record List.......................47

Deleting the Scheduled Record List.....................48

Using the Video Plus+ Feature .............................49

Video Plus+ Extended.............................................50

Recording the Standard Timer List ......................50

Playback

Before Playing..........................................................51

Region code (DVD-Video only).......................................51

Disc types that can be played.........................................51

Discs that cannot be played............................................51

Playing a Disc...........................................................52

Using the Disc & Title Menu............................................53

Using the Search Functions............................................53

Slow Motion Play..............................................................54

Step Motion Play..............................................................54

About ANYKEY ................................................................54

Using the Repeat Function..............................................55

Selecting the Subtitle .......................................................57

Selecting the Audio language..........................................58

Changing the Camera Angle...........................................58

Additional Information

Troubleshooting.......................................................87

Specifications...........................................................91

English -

Download from Www.Somanuals.com. All Manuals Search And Download.

High quality progressive scan

General Features

Progressive scanning provides high resolution and

flicker free video. The 10-bit 54-MHz DAC and 2D Y/C

Separating Circuitry provides the highest image

playback and recording quality. (See pages 19, 34~35)

The DVD Recorder allows you to record and play high

quality digital video on DVD-RAM/DVD-RW/DVD-R

discs. You can record and edit digital images on DVD-

RAM/DVD-RW/DVD-R discs as if they were VCR tapes.

A variety of functions with an easy-to-use user

interface

The integrated menu system and the messaging

function allow you to perform desired operations both

easily and conveniently. With a DVD-RAM or DVD-RW

disc, you can edit recorded video, create a playlist, edit

video in a specific sequence according to your

requirements.

High quality digital audio and video recording

and playback

Record up to 16-hours of video with a double sided 9.4

GB DVD-RAM disc, up to 8-hours of images with a 4.7

GB DVD-RAM/DVD-RW/DVD-R disc,

MPEG4 playback

This DVD Recorder can play MPEG4 formats within an

avi file.

depending on the recording mode.

DivX Certification

Selectable Recording Mode

DivX, DivX Certified, and associated

logos are trademarks of DivXNetworks

Inc. and are used under license.

You can set your recorder to one of four different

recording speeds, each varying in recording quality and

length. EP(6Hr or 8Hr) mode yields the most recording

time, LP & SP modes provide less recording time with

higher quality recording, XP mode gives you the highest

quality recording.

HDMI (High Definition Multimedia Interface)

HDMI reduces picture noise by allowing a pure digital

video/audio signal path from the DVD recorder to your

TV.

Automated Quality Adjustment for Timer

Recording

If FR mode is selected, the video quality is adjusted

automatically so that all video for the scheduled time

can be recorded onto the free disc space.

(See page 47.)

Creating a DVD video title using

DVD-RW/DVD-R disc

With the DVD Recorder, you can create your own DVD

Video titles on 4.7 GB DVD-RW/DVD-R discs.

Copying data from a digital camcorder using a

DV input jack

Record DV Device video onto DVD-RAM or DVD-RW,

DVD-R discs using the DV input jack (IEEE 1394-

4pin/4pin). (See page 44.)

8- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before reading the user’s

manual

How to use the DVD

Recorder

Make sure to check the following terms before

reading the user’s manual.

Select the disc type

Step 1

Icons that will be used in manual

This unit can record on the following types of discs.

If you want to repeatedly record on the same disc or

you want to edit the disc after recording, select a

rewritable DVD-RW or DVD-RAM type disc.

If you want to save recording without any change,

choose a non-rewritable DVD-R.

Icon

Term

DVD

Definition

This involves a function available

in DVD or DVD-R/DVD-RW

discs that have been recorded

and finalised in Video Mode.

This involves a function available

in DVD-RAM.

RAM

This involves a function available

in DVD-RW.

This involves a function available

in DVD-R.

This involves a function available

in a data CD (CD-R or CD-RW).

This involves a function available

in CD-R/-RW or DVD-R/-RW/-

RAM discs.

JPEG

MP3

Step 2

Format the disc to start recording

This involves a function available

in CD-R/-RW or DVD-R/-RW/-

RAM discs.

Unlike a VCR, the recorder automatically starts

formatting when an unused disc is inserted. This is

required for the preparation of recording on a disc.

This involves a function available

in CD-R/-RW or DVD-R/-RW/-

RAM discs.

MPEG4

Using a DVD-RAM

This type of disc can be formatted in DVD-Video

Recording format (VR mode). You can edit recorded

image and create a playlist and edit images in a

specific sequence according to your requirements.

This involves a case where a

Caution function does not operate or

settings may be cancelled.

This involves tips or instructions

on the page that help each

function operate.

Using a DVD-RW

NOTE

This type of disc can be formatted in either DVD-Video

format (Video mode) or DVD-Video Recording format

(VR mode). For an unused disc, a message that asks

whether to format in VR Mode or not is displayed.

You can play a Video mode disc on various DVD

components. A VR mode disc allows more varied

editing.

One-Touch A function that can be operated

button by using only one button.

ANYKEY A function that can be operated

button by using ANYKEY button.

Using a DVD-R

This type of disc can be formatted in DVD Video

format. After formatting is complete, you can record on

the disc. You can play this type of discs on various

DVD components only when they have been finalised.

About the use of this user’s manual

1) Be sure to be familiar with Safety Instructions before

using this product. (See pages 2~5)

2) If a problem occurs, check for Troubleshooting.

(See pages 87~90)

■

You can only use either the VR or

Video mode on a DVD-RW, but not

both at the same time.

NOTE

■

You can change the DVD-RW

format to another format by

reinitializing. It should be noted that

the disc's data will be lost when

changing formats.

manual may be reproduced or copied without the prior

written permission of Samsung Electronics Co.

English -

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Finalising & Playing on other DVD components

Step 3

Step 6

There are two different recording methods, Direct

Recording and Timer Recording. Timer recording is

classified as a Date : Once(dd/mm(MON)), Every Day,

MON-SAT, MON-FRI, Every SAT, etc.

Recording mode : XP (high quality mode), SP (standard

quality mode), LP (long recording mode), and EP

(extended mode) according to the recording mode. When

recording is set in the FR mode, the best quality picture is

recorded with regards to the remaining time on the disc.

To play your DVD on other DVD components,

finalising may be necessary. First, finish all editing and

recording operations, then finalise the disc.

When using a DVD-RW disc in VR Mode

Although finalising is generally unnecessary when

playing the disc on a VR Mode compatible component,

a finalised disc should be used for playback.

When using a DVD-RW disc in Video Mode

The disc should be finalised first to enable playback on

anything other than this recorder. No more editing or

recording can be made on the disc once it has been

finalised.

When using a DVD-R disc

You should finalise the disc to play it on a component

other than this recorder. You cannot edit or record on

the disc once it has been finalised.

Playing

Step 4

You can select the title you want to play in a displayed

menu and then immediately start playback.

A DVD consists of sections called titles, and sub

sections called chapters.

During recording, a title is created between two points

where you start and stop recording. Chapters will be

created automatically when you finalise recording on

DVD-R / DVD-RW discs in Video mode.

The chapter’s length (interval between chapters) varies

according to the recording mode.

Editing a recorded disc

Step 5

Editing on discs is easier than conventional video

tapes. The recorder supports many different edit

functions, possible only with DVDs.

With a simple and easy edit menu, you can operate

various edit functions, such as delete, copy, rename,

lock, etc., on a recorded title.

Creating a playlist (DVD-RAM/-RW in VR mode)

With this recorder, you can create a new playlist on the

same disc and edit it without the change of the original

recording.

10- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Unpacking

Accessories

Check for the supplied accessories below.

Setting the Remote Control

You can control certain functions of another

manufacturer’s TV with this remote control.

Control function buttons involve: STANDBY/ON,

PROG

TV MUTE, INPUT button.

, TV VOL +/-, Direct Number buttons,

RF Cable for TV

Video/Audio Cable

HDMI Cable

DVI Adapter Cable

Batteries for Remote

Control (AAA Size)

Remote Control

Instruction Manual

Quick Guide

Preparing the Remote Control

Install Batteries in the Remote Control

Open the battery cover on the back of the remote

control.

Insert two AAA batteries. Make sure that the polarities

(+ and -) are aligned correctly.

Replace the battery cover.

If the remote does not operate properly:

Check the polarity + - of the batteries (Dry-Cell)

Check if the batteries are drained.

Check if remote sensor is blocked by obstacles.

Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local

environmental regulations. Do not put them in the

household trash.

English -11

Download from Www.Somanuals.com. All Manuals Search And Download.

To determine whether your television is

compatible, follow the instructions below.

1. Switch your television on.

2. Point the remote control towards the television.

3. Press and hold the STANDBY/ON button and enter

the two-figure code corresponding to the brand of

your television, by pressing the appropriate number

buttons.

BRAND

BUTTON

SELECO

SHARP

36, 37, 38, 39, 48

SIEMENS

SINGER

SINUDYNE

SONY

35, 48

TELEAVA

TELEFUNKEN

THOMSON

THOMSON ASIA

TOSHIBA

WEGA

Controllable TV Codes

67, 73, 75, 76

BRAND

BUTTON

72, 73, 75

SAMSUNG

AIWA

01, 02, 03, 04, 05, 06, 07, 08, 09

80, 81

47, 48, 49, 50, 51, 52

ANAM

10, 11, 12, 13, 14, 15, 16, 17, 18

BANG & OLUFSEN

BLAUPUNKT

BRANDT

BRIONVEGA

CGE

YOKO

ZENITH

Result: If your television is compatible with the remote

control, it will switch off.

CONTINENTAL EDISON

DAEWOO

EMERSON

FERGUSON

FINLUX

It is now programmed to operate with the

remote control.

19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34

ꢀ

If several codes are indicated for your

television brand, try each one in turn until

you find one that works.

06, 49, 57

NOTE

FORMENTI

FUJITSU

GRADIENTE

GRUNDIG

HITACHI

ꢀ

If you replace the remote control's

batteries, you must set the brand code

again.

49, 52, 71

60, 72, 73, 75

IMPERIAL

JVC

61, 79

Then you can control the television using the

following buttons after the TV button.

06, 19, 20, 21, 22, 78

LOEWE

06, 69

LOEWE OPTA

MAGNAVOX

METZ

06, 57

Button

Function

STANDBY/ON

INPUT

Used to switch the television on and off.

Used to select an external source.

Used to adjust the volume of the television.

Used to select the desired channel.

Used to toggle the sound on and off.

Used to input number directly.

TV VOL (+ or -)

PROG ( or

TV MUTE

0~9

MITSUBISHI

MIVAR

06, 48, 62, 65

)

52, 77

NEC

NEWSAN

NOBLEX

NOKIA

ꢀ

The various functions will not necessarily

work on all televisions. If you encounter

problems, operate the television directly.

NORDMENDE

PANASONIC

PHILIPS

72, 73, 75

53, 54, 74, 75

06, 55, 56, 57

06, 56, 57

58, 59, 73, 74

06, 56

NOTE

PHONOLA

PIONEER

RADIOLA

RADIOMARELLI

RCA

45, 46

REX

SABA

57, 72, 73, 74, 75

SALORA

SANYO

41, 42, 43, 44, 48

SCHNEIDER

12- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Description

Front Panel

1. STANDBY/ON

7. DISPLAY

Displays the playing status, title/ chapter/ time, etc.

Turns the recorder on and off.

2. AV3 INPUT

8. SEARCH/SKIP

Connect external equipment.

Goes to the next title/chapter/track or goes back

to the previous title/chapter/track.

3. DV-INPUT

Connect external digital equipment with a DV

jack. (such as a camcorder)

9. STOP

Stops disc playback.

4. DISC TRAY

10. PLAY/PAUSE

Opens to accept a disc.

Plays a disc or pauses playback or recording.

5. OPEN/CLOSE

11. PROG (

)

Opens and closes the disc tray.

Select TV preset Channels.

Same as PROG button on the remote control.

6. P.SCAN

Selects the progressive scan mode.

12. REC

Starts recording.

13. Remote Control Reciever

Front Panel Display

1. Lights in the record mode.

2. Lights to indicate the timer record mode.

3. Lights in the progressive scan mode.

4. Playing time/clock/current status indicator.

5. Lights when a disc is loaded.

6. Lights when a -R/RW/RAM disc is loaded.

English -13

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel

Fan

The fan always revolves when the power is on.

Ensure a minimum of 10cm clear space on all sides of

the fan when installing the product.

1. DIGITAL AUDIO OUT(OPTICAL)

5. S-VIDEO OUT

Connects to an amplifier having a digital optical

audio input jack.

Connects the input of external equipment using an

S-Video cable.

2. DIGITAL AUDIO OUT(COAXIAL)

6. COMPONENT VIDEO OUT

Connects to equipment having Component video

output.

Connects to an amplifier having a digital coaxial

audio input jack.

7. AV1(TV) OUTPUT SCART Connector

8. AV2(EXT) INPUT SCART Connector

9. HDMI OUT

3. AUDIO OUT

Connects to the audio input of external equipment

using audio cables.

4. VIDEO OUT

10.

11.

In from aerial connector

Out to TV connector

Connects the input of external equipment using a

Video cable.

ꢀ

The Antenna connection does not pass

output signal of DVD. To watch a DVD on

your TV, you must connect audio/video or

Scart cables.

NOTE

14- English

Download from Www.Somanuals.com. All Manuals Search And Download.

10. MENU Button

Tour of the Remote Control

Brings up the DVD recorder’s setup menu.

11. OK/DIRECTION Buttons

(… † œ √ Buttons)

12. REC MODE Button

This will display the recording status.(XP/SP/LP/EP)

13. REC Button

Use to make a recording on DVD-RAM/-RW/-R

discs.

14. CANCEL Button

15. REPEAT Button

Allows you to repeat a title, chapter, track or disc.

16. OPEN/CLOSE Button

To open and close the disc tray.

17. AUDIO/TV MUTE Button

Use this to access various audio functions on a

disc.(DVD mode)

This operates as Sound Mute. (TV mode)

18. TV Button

Press this to operate TV.

19. INPUT Button

Select line input signal in external input mode

(PROG, AV input or DV INPUT)

20. PROG Button

Select preset channels in a specific order.

Same as PROG buttons in front panel.

21. TITLE LIST/DISC MENU Button

Use this to enter the View Recording list/Disc menu.

22. PLAY LIST/TITLE MENU Button

Use this to return to the Title menu, or to view the

recorded files list.

23. ANYKEY Button

Use this to view the status of the disc that is being

played.

24. SUBTITLE Button

Press this to switch the DVD’s subtitle language.

1. STANDBY/ON Button

2. Number Buttons

3. TV/DVD Button

25. RETURN Button

Returns to a previous menu.

26. MARKER/TIMER Button

Use this to bookmark a position while playing a

disc.

4. DVD Button

Press this when you use a DVD Recorder.

Press to directly enter the Timer Recording Mode

menu while stopping a disc.

5. TV VOL Buttons

TV volume adjustment.

27. INFO Button

6. Reverse/Forward Skip Buttons

Press to skip a disc backwards or forwards.

These buttons also function as STEP buttons.

Each press will play one-frame forward or reverse

(see page 54).

This will display current settings or disc status.

7. Reverse/Forward Search Buttons

Press to search a disc backwards or forwards.

8. Stop Button

Press to stop a disc.

9. Play/Pause Button

Press to play/pause a disc.

English -15

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Overview

Connecting

& Setting Up

A Quick Overview presented in this guide will give you

enough information to start using the recorder.

This section involves various methods of

connecting the DVD Recorder to other external

components and required initial setting modes.

Connecting the DVD-Recorder

†

Additional connections

†

Other type of connecting the

Video output cable

†

Other type of connecting the Audio

output cable

†

Connecting to HDMI/DVI to a TV

†

Connecting to AV3 IN, DV input jack

Quick Overview.................................................16

Connecting the DVD-Recorder ..........................17

Additional connections .....................................17

Other type of connecting the

Video output cable............................................18

Other type of connecting the Audio output cable....20

Connecting to HDMI/DVI to a TV ....................21

Connecting to AV3 IN, DV input jack...............22

16- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the DVD-

Recorder

Additional connections

You can connect your DVD Recorder to the television

using the SCARTcable if the appropriate input is

available on the television.

You can connect your DVD Recorder to a satellite or

digital tuner.

1. Connect the RF cable as shown.

2. Connect one end of the SCARTcable to the AV1

socket on the rear of the DVD Recorder.

3. Plug the other end into the appropriate connector on

the television.

4. Plug in the DVD Recorder and TV

5.Turn on the DVD Recorder and TV.

external device

(VCR/Satellite receiver)

6. Press the INPUT button on your TV remote control

until the Video signal from the DVD Recorder

appears on the TV screen.

To RF IN

- DVD mode

1. Connect the AV2 connector of DVD Recorder and

VCR/Satellite receiver or digital tuner using a SCART

cable.

To TV

2. Connect the AV1 connector to the SCARTAV

connector on TV.

RF Cable

3. Turn on the DVD Recorder, VCR/Satellite receiver or

digital tuner and TV.

To ANT INPUT

4. Set Input mode on AV2.

- TV mode

1. Press the TV/DVD button on remote control, then

“TV” appear on Front LED display. (or turn off DVD

Recorder.)

ꢀ

The RF cable connection of this product

sends only signals of TV.

You must connect SCARTcable or

Audio/Video cables to watch a DVD from

your DVD Recorder.

NOTE

2. You can watch programmes from a satellite or digital

tuner connected to this DVD Recorder, even when

the DVD Recorder is turned off.

ꢀ

TV mode

Press the TV/DVD button on remote

control, then “TV” appear on Front LED

display (or turn off DVD Recorder).

Then you can watch programmes

received through RF cable.

English -17

Download from Www.Somanuals.com. All Manuals Search And Download.

Case 1 : Connecting to a Video

(Composite) output jack

1. Connect a video(yellow) cable between the VIDEO

(yellow) OUTjack on DVD Recorder and VIDEO

(yellow) INPUTjack on your TV (or AV amplifier).

Other type of connecting

the Video output cable

ꢁ

You will enjoy high quality images.

(See pages 20).

ꢁ

Press the input selection on your TV remote control

until the Component signal from the DVD Recorder

appears on your TV screen.

3. After connecting, refer to the page 33 to 35.

ꢁ

You will enjoy high quality and accurate colour

reproduction images.

COMPONENT

green

blue

red

ꢀ

The Component jacks will not output video

resolutions above 576p.

To view 720p and 1080i connect the DVD Recorder

to your TV with the supplied HDMI cable.

With HDMI connected, press the P.SCAN button to

alternate between all available resolutions.

(See page 34)

ꢀ

Make sure that the colour coded

connections match. The Y, P , P

NOTE

component output jacks of your DVD

Recorder must be connected to the exact

corresponding component input jacks on

your TV.

ꢀ

Progressive setting is only available when

the Video Out is set to Component.

(See pages 34~35)

English -19

Download from Www.Somanuals.com. All Manuals Search And Download.

Case 2 : Connecting to a stereo

amplifier with AV output jacks

If your stereo amplifier only has AUDIO INPUT

jacks(L and R), use the AUDIO OUTjacks.

Other type of connecting

the Audio output cable

There are several ways to output audio signal not using

scart cables. Select the audio connection that best suits

you below.

ꢁ

Case 1 : Connecting to your TV

Case 2 : Connecting to a stereo amplifier with AV

output jacks

ꢁ

Case 3 : Connecting to an AV amplifier with a

digital output jack

red

white

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of

Digital Theatre Systems, Inc.

Front(L)

speaker

Front(R)

speaker

Case 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.

Case 3: Connecting to an AV

amplifier with a digital output jack

If your AV amplifier has a Dolby Digital, MPEG2 or

DTS decoder and a digital input jack, use this

connection. To enjoy Dolby Digital, MPEG2 or DTS

sound, you will need to set up the audio settings.

(See page 33)

yellow

white

red

Rear(L)

Rear(R)

Front(L)

Front(R)

Subwoofer

Centre

20- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting HDMI/DVI to a

If your TV has a HDMI/DVI input, connect HDMI/DVI

Adapter cable to a TV. You will enjoy the best quality

images and sounds.

ꢁ

Case 1 : Connecting to a TV with HDMI Jack

Case 2 : Connecting to a TV with DVI Jack

white

red

Case 1 : Connecting to a TV

with HDMI Jack

• Using the HDMI cable connect the HDMI OUT

jack on the rear of the DVD Recorder to the HDMI IN

jack of your TV.

• Press the input selector on your TV remote control

until the HDMI signal from the DVD Recorder appears

on your TV screen.

ꢀ To change HDMI output resolution, see

page 36.

NOTE

ꢀ HDMI (High Definition Multimedia

Interface)

HDMI is an interface to enable the digital

transmission of video and audio data with

just a single connector. Since HDMI is

based on DVI, it is completely compatible

with DVI. The only difference between

HDMI and DVI is that HDMI supports

multi-channel audio.

Using HDMI, the DVD recorder transmits

a digital video and audio signal and

displays a vivid picture on a TV having an

HDMI input jack.

ꢀ HDMI connection description

HDMI connector - Both uncompressed

video data and digital audio data (LPCM

or Bit Stream data).

- Though the DVD recorder uses a HDMI

cable, the DVD recorder outputs only a

pure digital signal to the TV.

Case 2 : Connecting to a TV

with DVI Jack

• Using the DVI Adapter Cable, connect the HDMI OUT

jack on the rear of the DVD Recorder to the DVI IN

jack of your TV.

- If TV does not support HDCP (High-

bandwidth Digital Content Protection),

snow noise appears on the screen.

ꢀ Why does Samsung use HDMI?

Analog TVs require an analog video/audio

signal. However, when playing a DVD, the

data transmitted to a TV is digital.

• Using the audio cables, connect the AUDIO (red and

white) OUT jacks on the rear of the DVD Recorder to

the AUDIO (red and white) IN jacks of your TV. Turn

on the DVD recorder and TV.

Therefore either a digital-to-analog

converter (in the DVD Recorder) or an

analog-to-digital converter (in the TV) is

required. During this conversion, the

picture quality is degraded due to noise

and signal loss. HDMI technology is

superior because it requires no D/A

conversion and is a pure digital signal

from the DVD recorder to your TV.

• Press the input selector on your TV remote control

until the DVI signal from the DVD Recorder appears

on your TV screen.

ꢀ

To watch through the HDMI output, set

the digital audio output to PCM.

See page 32~33.

CAUTION

ꢀ What is the HDCP?

HDCP (High-bandwidth Digital Content

Protection) is a system for protecting DVD

content outputted via HDMI from being

copied. It provides a secure digital link

between a video source (PC, DVD. etc)

and a display device (TV, projector. etc).

Content is encrypted at the source device

to prevent unauthorized copies from being

made.

ꢀ

Depending on the HDMI device (TV/HDMI

Receiver) you use, audio may not be

supported. If TV does not support Dolby

digital/DTS, Audio output is not available

when you set Digital output as Bitstream

or select DTS On in Audio setup menu.

In this case, set the digital audio output to

PCM or DTS off.

English -21

Download from Www.Somanuals.com. All Manuals Search And Download.

Case 2 : Connecting a

Camcorder to the DV IN jack

If your digital camcorder has a DV output jack, connect

it to the DV input jack of your DVD Recorder.

Connecting to AV3 IN, DV

input jack

This allows you to connect your DVD Recorder to other

external devices and view or record their outputs.

ꢁ

Case 1 : Connecting a VCR, Set-Top Box(STB), DVD

recorder or Camcorder to the AV3 IN jacks

ꢁ

Case 2 : Connecting a DV Device to the DV IN jack

Camcorder

Case 1 : Connecting a VCR,

Set-Top Box(STB), DVD

recorder or Camcorder to the

AV3 IN jacks

Connecting a VCR or external device to AV3 IN jacks of

the DVD Recorder.

You can record from connected equipment (VCR, STB,

DVD recorder or Camcorder).

ꢀ

If the input is not selected automatically,

use INPUT button to select proper input.

NOTE

Camcorder

VCR

STB

DVD

yellow

white

red

ꢀ

AV 3 in selection will be automatically

done. If the input is not selected

NOTE

automatically, use INPUT button to select

proper input.

ꢀ

Copy protected content cannot be

recorded.

22- English

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Menu

Navigation

System

Setup

The on-screen menus allow you to enable or disable

various functions on your DVD Recorder.

Use the following buttons to open and navigate through

the on-screen menus.

Timer Record

Disc Navigation

No Disc

Programme

Setup

DVD-RAM(VR)

Video Plus+

√

Disc Navigation Title List

√

Timer Record

DivX

Playlist

Photo

Video Plus+ Extended : Off

√

Disc manager

Programme

Setup

Music

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

MENU Button

Press this button on the remote control to open the

on-screen MENU.

Press again to exit the on-screen MENU.

… † œ √

Buttons

Press these buttons on remote control to move the

selection bar … † , œ √ to cycle through the menu

options.

On-Screen Menu Navigation......................23

Plug & Auto Setup......................................24

Setting the Clock........................................25

Presetting Channels with

OK Button

Press this button on the remote control to confirm any

new settings.

the Auto Setup function..............................26

Presetting Channels with

RETURN Button

Press this button on the remote control to return to the

Previous MENU screen displayed or to exit the

on-screen MENU.

the Manual Setup function .........................27

Setting up the Language Options ..............28

EP Mode Time Setting ...............................29

Automatic Chapter Creation.......................30

Setting up the Front Display Options .........31

Setting up NICAM Options.........................31

DivX(R) Registration...................................32

Setting up the Audio Options .....................32

Setting up Video Output Options................33

Setting up the Progressive scan ................34

Canceling the Progressive scan.................35

Setting up the Display(Video) Options .......35

Setting up the Parental Control..................37

English -23

Download from Www.Somanuals.com. All Manuals Search And Download.

After Auto Channel Scan is completed, Auto

Clock Setting will be started automatically in

10 seconds. If you want to start Auto Clock

Setting immediately, press OK button.

If you do not want to do Auto Clock Setting,

press CANCEL or MENU button.

Plug & Auto Set up

Your DVD Recorder will automatically set itself up when

it is plugged in for the first time. TV stations and clock

will be stored in memory. The process takes a few

minutes. Your DVD Recorder will then be ready for use.

Auto channel scan completed successfully.

Press [OK] button to auto clock set.

Cancel

Connect the RF cable as indicated on page

17.

(Connecting Your DVD Recorder to the TV Using the RF

Cable and scart cable.)

Wait until current date and time are

displayed automatically. If you want to exit

Auto clock setting, press MENU button.

Plug the DVD Recorder into the mains.

“AUTO” in the front panel display flickers.

Please wait. Now setting the clock.

If you want to exit clock setting,

press the [MENU] button.

Start the auto setup.

Check the date and time.

Auto setup will be started.

Check antenna and TV cable connection.

Clock Set

Auto Clock

No Disc

Cancel

Programme

Setup

Time

Date

01 / JAN / 2005 SAT

12 : 00

MOVE

RETURN

EXIT

Auto Channel scan will be started.

• if it is : Correct, press OK button then the date and time will

be saved. If you don't press the OK button, the date

and time will be saved automatically after 5 seconds.

• if it is : Incorrect, input correct Time, Date, Year using †…œ

√ buttons or number buttons. Press OK button then

the date and time will be saved. When you need to

change clock setting, you can set up it manually.

(see page 25)

Channel scan

Now, Scanning.

•

The number of stations automatically stored by the DVD

Recorder depends on the number of stations that it has found.

ꢀ

Now, DVD Recorder is ready for use. Function for

“Plug & Auto Setup” is fixed already. So if you want

to change this fixed one, you can change it by

NOTE

Presetting the Stations in OSD “Presetting

Channels with the Manual set up function” menu.

(see page 27)

ꢀ

Auto Set up function can be performed by pressing

é (STOP) on the DVD recorder continuously for 5

seconds or more during power off with no disc

inserted.

24- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select On for the

Setting the Clock

Auto Clock.

Clock Set

No Disc

Programme

Setup

Time

Date

01 / JAN / 2005 SAT

Auto Clock

12 : 00

Off

This menu is used to set the current time.

You need to set the time to use timer recording.

MOVE

RETURN

EXIT

With the unit in Stop mode/No Disc mode,

press the MENU button.

Press the OK button, then the date and

time will be saved.

If you don’t press the OK button, it will not be saved.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Timer Record

Video Plus+ Extended : Off

√

ꢀ

You must have the RF cable connected to

MOVE

RETURN

EXIT

set the Auto Clock. See page 17.

NOTE

ꢀ

The DVD Recorder automatically sets the

clock according to the time signal

broadcast between the channels PR1 to

PR5. If you do not need the Auto clock

set function, select Off.

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

System

√

Clock Set

Language

Audio

Video

Parental Control

Install

MOVE

RETURN

EXIT

Press the …† buttons to select Clock Set,

then press the OK or √ button.

Use navigation …†œ √ buttons to input Time, Date

or Year. Use number buttons to input clock data

directly. The day of the week is displayed

automatically.

Clock Set

No Disc

Programme

Setup

Time

Date

01 / JAN / 2005 SAT

Auto Clock

12 : 00

Off

MOVE

RETURN

EXIT

English -25

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Auto

Setup, then press the OK or √ button.

The message “Your data will be lost.Press [OK] to

continue, [MENU] to exit.” is displayed.

Presetting Channels with

the Auto Setup function

Install

No Disc

Programme

Setup

This feature allows you to manually set the DVD

Recorder tuner band to Antenna or Cable, whichever

you connected to the Antenna In jack during initial

setup.

Auto Setup

√

Manual Setup

Your data will be lost.

Press [OK] to continue, [MENU] to exit.

MOVE

RETURN

EXIT

With the unit in Stop mode/No Disc mode,

press the MENU button.

Timer Record

No Disc

Press the OK button to continue.

Programme

Setup

Video Plus+

√

If you want to exit, press the MENU button.

Timer Record

Video Plus+ Extended : Off

√

Auto Setup

11%

No Disc

Programme

Setup

Please wait.

Scanning...

MOVE

RETURN

EXIT

Stop

RETURN

EXIT

Press the …† buttons to select Setup, then

press the OK or √ button.

Channel scan will be started.

Press the OK button to stop the Auto Setup.

Setup

No Disc

Programme

Setup

System

√

Clock Set

Language

Audio

Video

Parental Control

Install

MOVE

RETURN

EXIT

Press the …† buttons to select Install, then

press the OK or √ button.

Install

No Disc

Programme

Setup

Auto Setup

√

Manual Setup

MOVE

RETURN

EXIT

26- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Manual

Presetting Channels with

the Manual Setup function

Setup, then press the OK or √ button.

Manual Setup

No Disc

Name

Edit

- - -

- - - -

√

You can add preset channel that Auto Channel Search

missed. And you can delete a channel you wish to

remove. You can programme the order of channels.

MOVE

RETURN

EXIT

Press the …† buttons to select a PR

(programme) you wish to edit, delete, or

swap, then press the OK or √ button.

Select Edit, Delete or Swap.

With the unit in Stop mode/No Disc mode,

press the MENU button.

Manual Setup

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Name

Edit

Timer Record

Edit

109

- - -

- - - -

√

Video Plus+ Extended : Off

√

Delete

√

Swap

√

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

• In case of Edit : you can add or edit PR(programme)

After change PR informations(CH, Name, Decoder,

MFT), select Save, then press the OK button.

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

Manual Setup

System

√

Clock Set

Language

Audio

109

- - - -

Name

MFT

Video

- - - - - -

Parental Control

Install

Save

MOVE

RETURN

EXIT

- CH : Tune the channel using œ √ buttons.

- Name : Display station name automatically detected in

broadcasting signal. If not detected, you can

edit name by using …†œ √ buttons.

- MFT : You can tune up the channel frequency better

using œ √ buttons.

Press the …† buttons to select Install, then

press the OK or √ button.

Install

No Disc

Programme

Setup

Auto Setup

√

Manual Setup

• In case of Delete : the channel information of selected

PR(programme) will be removed.

MOVE

RETURN

EXIT

• In case of Swap : You can swap the channel

information of two PR(programme). For example, if you

wish to swap PR2 and PR5, select swap at PR2, then

press the OK or √ button at PR5.

English -27

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select the desired

language option, then press the OK or √

button.

Audio Language: For the speaker sound.

Subtitle Language: For the disc subtitles.

Disc Menu Language: For the disc menu

contained on the disc

Setting up the Language

Options

ꢁ

If you set the audio, subtitle, disc menu, on-screen

menu and DivX subtitle language in advance, they

will come up automatically every time you watch a

movie.

If the selected language is not recorded on the disc,

the original pre-recorded language is selected.

ꢁ

On-Screen Menu Language: For the Player Menu

of your DVD Recorder

DivX Subtitle: Selecting a supported DivX subtitle

language by region

English, Breton, Catalan, Danish, Dutch,

Faroese, Finnish, French, Gaelic, German,

Icelandic, Irish, Italian, Norwegian, Portuguese,

Western

Spanish and Swedish

With the unit in Stop mode/No Disc mode,

English, Albanian, Croatian, Czech, Hungarian,

Polish, Romanian, Slovak, Slovene and

Serbian(Latin)

press the MENU button.

Central

Greek

Timer Record

No Disc

English and modern Greek

Programme

Setup

Video Plus+

√

Timer Record

Video Plus+ Extended : Off

√

Press the …† buttons to select the desired

Language, then press the OK or √ button.

MOVE

RETURN

EXIT

Language

No Disc

Programme

Setup

Audio

: Original

Original

√

Subtitle

Disc Menu

: Automatic

English

: English

Français

On-Screen Menu : English

Deutsch

Press the …† buttons to select Setup, then

press the OK or √ button.

DivX Subtitle

: Western

Español

Italiano

Nederlands

Korean

Setup

MOVE

RETURN

EXIT

No Disc

Programme

Setup

System

√

Clock Set

Language

Audio

Video

Parental Control

Install

ꢀ

Press the RETURN or œ button to return

to the previous menu.

Press the MENU button to exit the menu.

MOVE

RETURN

EXIT

NOTE

ꢀ

The selected language will only appear if

it is supported on the disc.

Press the …† buttons to select Language,

then press the OK or √ button.

Language setup menu will be displayed.

If the subtitle language is displayed in

broken fonts, change DivX Subtitle to the

appropriate region.

If it still does not work, the format is not

supported.

Language

No Disc

Programme

Setup

Audio

: Original

: Automatic

: English

√

Subtitle

Disc Menu

On-Screen Menu : English

DivX Subtitle

: Western

MOVE

RETURN

EXIT

28- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select EP Mode

EP Mode Time Setting

Time, then press the OK or √ button.

System

No Disc

Programme

Setup

EP Mode Time

: 6Hours

6 Hours

√

Chapter Creator : Off

8 Hours

: Bright

Front Display

NICAM

: On

You can select one of four recording modes by pressing

the REC MODE button repeatedly.

EP mode is one of four REC Mode (XP,SP,LP,EP).

In EP(Extended Play) mode, you can set recording time

to 6 or 8 hours by this setting.

DivX(R) Registration

MOVE

RETURN

EXIT

With the unit in Stop mode/No Disc mode,

press the MENU button.

Press the …† buttons to select the desired

time, then press the OK or √ button.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Timer Record

Video Plus+ Extended : Off

√

MOVE

RETURN

EXIT

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

System

√

Clock Set

Language

Audio

Video

Parental Control

Install

MOVE

RETURN

EXIT

Press the …† buttons to select System,

then press the OK or √ button.

System menu will be displayed.

System

No Disc

Programme

Setup

EP Mode Time

: 6Hours

√

Chapter Creator : Off

Front Display

NICAM

: Bright

: On

DivX(R) Registration

MOVE

RETURN

EXIT

English -29

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select On or Off,

then press the OK or √ button.

• Off: Select this option when you do not want

(Automatic Chapter Creation).

• On: Select this option when you want (Automatic

Chapter Creation).

Automatic Chapter

Creation

A DVD-Video consists of ‘Titles’ and ‘Chapters’.

When you record one programme, it makes one Title.

If you use this function, the Title will be divided into

Chapters.

Press the REC button to start recording.

(See page 42 about how to set recording

speed) The message “Do you want to

create the chapter menu after this

recording?” is displayed.

(V mode)

With the unit in Stop mode/No Disc mode,

press the MENU button.

Disc Navigation

DVD-RW(V)

Do you want to create the chapter menu

after this recording?

Disc Navigation Title List

Disc manager

Programme

√

Yes

Setup

MOVE

RETURN

EXIT

Press the œ √ buttons to select Yes and

press the OK button.

• A new chapter is created according to the selected

recording mode. A chapter will be about 5 minutes long

in XP and SP, and about 15 minutes long in LP and EP

mode.

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

DVD-RW(V)

Disc Navigation

Disc manager

Programme

Setup

System

√

Clock Set

Language

Audio

Video

Press the STOP button to stop recording.

Parental Control

Install

MOVE

RETURN

EXIT

Todisplaythecreatedchapters, finalisethe

disc (see page 85) and then press the DISC

MENU button. The chapter menu will be

displayed.

Press the …† buttons to select System,

then press the OK or √ button.

System menu will be displayed.

CHAPTER

System

DVD-RW(V)

Disc Navigation EP Mode Time

: 6Hours

√

Chapter Creator : Off

Disc manager

Programme

Setup

Front Display

NICAM

: Bright

: On

DivX(R) Registration

Top

MOVE

RETURN

EXIT

Press the …† buttons to select Chapter

Creator, then press the OK or √ button.

ꢀ

The Automatic Chapter Creation function

does not work during Timer Recording or

when you turn the power off.

CAUTION

System

DVD-RW(V)

Disc Navigation

Disc manager

Programme

Setup

√

EP Mode Time

: 6Hours

Off

Chapter Creator : Off

DVD-R discs cannot be unfinalised.

Front Display

NICAM

: Bright

: On

DivX(R) Registration

MOVE

RETURN

EXIT

30- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the Front

Display Options

Setting up NICAM Options

Adjust the brightness of the DVD recorder front panel

display.

NICAM programmes are divided into 3 types. NICAM

Stereo, NICAM Mono and Bilingual (transmission in

another language). NICAM programmes are always

accompanied by a standard mono sound broadcast and

you can select the desired sound by setting NICAM on or

off.

With the unit in Stop mode/No Disc mode,

press the MENU button.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

With the unit in Stop mode/No Disc mode,

Timer Record

Video Plus+ Extended : Off

√

press the MENU button.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

MOVE

RETURN

EXIT

Timer Record

Video Plus+ Extended : Off

√

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

MOVE

RETURN

EXIT

System

√

Clock Set

Language

Audio

Video

Parental Control

Install

Press the …† buttons to select Setup, then

press the OK or √ button.

MOVE

RETURN

EXIT

Setup

No Disc

Programme

Setup

System

√

Press the …† buttons to select System,

then press the OK or √ button.

System menu will be displayed.

Clock Set

Language

Audio

Video

Parental Control

Install

System

No Disc

Programme

Setup

EP Mode Time

: 6Hours

√

Chapter Creator : Off

MOVE

RETURN

EXIT

Front Display

NICAM

: Bright

: On

DivX(R) Registration

Press the …† buttons to select System,

then press the OK or √ button.

System menu will be displayed.

MOVE

RETURN

EXIT

Press the …† buttons to select Front

Display, then press the OK or √ button.

System

No Disc

Programme

Setup

EP Mode Time

: 6Hours

√

System

No Disc

Programme

Setup

Chapter Creator : Off

EP Mode Time

: 6Hours

√

Front Display

NICAM

: Bright

: On

Chapter Creator : Off

Front Display

NICAM

: Bright

Bright

Dim

DivX(R) Registration

: On

DivX(R) Registration

Auto Dim

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

Press the …† buttons to select the desired

item, then press the OK or √ button.

• Bright : Makes the Front Panel Display bright.

• Dim : Makes the Front Panel Display dim.

• Auto Dim : Makes the Front Panel Display dim

automatically when during power off.

English -31

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select NICAM,

Setting up the Audio

Options

then press the OK or √ button.

System

No Disc

Programme

Setup

EP Mode Time

: 6Hours

√

Chapter Creator : Off

Front Display

NICAM

: Bright

: On

Off

You can connect the DVD Recorder to an external amp

or Home Theatre.

Allow you to setup the Audio device and sound status

depending on the audio system in use.

DivX(R) Registration

MOVE

RETURN

EXIT

With the unit in Stop mode/No Disc mode,

press the MENU button.

Press the …† buttons to select On or Off,

then press the OK or √ button.

• Off: Only set at this position to record the standard

mono sound during a NICAM broadcast if the stereo

sound is distorted due to inferior reception conditions.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Timer Record

Video Plus+ Extended : Off

√

• On: NICAM mode

MOVE

RETURN

EXIT

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

System

√

Clock Set

Language

Audio

DivX(R) Registration

Video

Parental Control

Install

MOVE

RETURN

EXIT

Please use the Registration code to register this DVD

Recorder with the DivX(R) Video On Demand format.

To learn more, visit www.divx.com/vod.

Press the …† buttons to select Audio, then

press the OK or √ button.

Audio setup menu will be displayed.

Audio

No Disc

Programme

Setup

Digital Output

DTS

: PCM

: Off

√

Dynamic Compression : On

MOVE

RETURN

EXIT

Press the …† buttons to select the desired

audio option, then press the OK or √

button.

Audio

No Disc

Programme

Setup

Digital Output

DTS

: PCM

PCM

: Off

Bitstream

√

Dynamic Compression : On

MOVE

RETURN

EXIT

32- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up Video Output

Options

Press the …† buttons to select the desired

item, then press the OK or √ button.

ꢀ

Press the RETURN or œ button to return

to the previous menu.

Press the MENU button to exit the menu.

You can enjoy high quality image through RGB or

Component video connections.

NOTE

With the unit in Stop mode/No Disc mode,

press the MENU button.

Audio Options

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Digital Output

Timer Record

Video Plus+ Extended : Off

√

1. PCM : Select this when you have no equipment that

can decode Dolby Digital (or MPEG-2) signal.

When you play Dolby Digital (or MPEG-2)

sound track, the digital output are converted to

PCM Stereo.

MOVE

RETURN

EXIT

2. Bitstream : Output Dolby Digital (or MPEG-2) audio as

bitstream. Select this when your AV

receiver or AV amplifier have Dolby Digital

(or MPEG-2) Decoder.

Press the …† buttons to select Setup, then

press the OK or √ button.

ꢀ

Digital output setting is equally applied to

both Dolby Digital and MPEG-2 audio.

Setup

No Disc

Programme

Setup

NOTE

LPCM sound track is always outputted as

PCM. It has no relation with Digital Output

setting.

System

√

Clock Set

Language

Audio

Video

ꢀ

Parental Control

Install

Be sure to select the correct Digital

Output or you will hear no sound or loud

noise.

MOVE

RETURN

EXIT

DTS

1. Off : Doesn’t output DTS signal.

Select this when your AV receiver or AV

amplifier does not have DTS decoder.

2. On : Outputs DTS Bitstream via digital output when you

play DTS track.

Press the …† buttons to select Video, then

press the OK or √ button.

Video setup menu will be displayed.

Select this only when your AV receiver (or AV

amplifier) have DTS decoder.

Video

No Disc

Programme

Setup

TV Aspect

: 16:9 Wide

: Off

√

3D Noise Reduction

HDMI/DVI Resolution : 576p

Video Output

Component

√

ꢀ

When DTS soundtrack is played, sound

does not output from AV Audio Output.

NOTE

MOVE

RETURN

EXIT

Dynamic Compression

This is only active when a Dolby Digital signal is

detected.

1. Off : You can enjoy the movie with the standard

Dynamic Range.

2. On : When Movie soundtracks are played at low

volume or from smaller speakers, the system

can apply appropriate compression to make

low-level content more intelligible and prevent

dramatic passages from getting too loud.

English -33

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Video

Setting up the Progressive

scan

Output, then press the OK or √ button.

Video

No Disc

Programme

Setup

TV Aspect

: 16:9 Wide

: Off

√

3D Noise Reduction

HDMI/DVI Resolution : 576p

If the TV supports Progressive Scan, press the P.SCAN

button on the front of the DVD Recorder to enjoy.

Video Output

Component

√

Component

RGB

MOVE

RETURN

EXIT

With the unit in Stop mode, press the

P.SCAN button on the front of the DVD

Recorder.

Component Select this when the Recorder is connected

The message “Press [Yes] to confirm Progressive

scan mode. Otherwise press [No]” will appear.

Press the œ √ buttons to select Yes, and then press

the OK button.

to a TV with Component jack.

RGB

Select this when the Recorder is connected

to your TV using SCART cable.

Press the …† buttons to select the desired

item, then press the OK or √ button.

Press [Yes] to confirm Progressive scan mode.

Otherwise press [No]

Yes

In Component mode, you can set video output to

Progressive(P.SCAN) or Interlace, see page 35.

The message “Please set your TV to

When the HDMI cable is not connected, available video

output jacks are as follow.

NOTE

Progressive input. To deactivate, press

[STOP] key.” will appear. Press the OK button.

Available Video Output Jack

Component mode

Setting mode

RGB Mode

Please set your TV to Progressive input.

To deactivate, press [STOP] key.

Output jack

Component Output

(Y, Pb, Pr)

P.SCAN off mode (Interlace mode)

P.SCAN on mode

(TV in progressive mode)

R, G, B

Composite

AV1 Scart

AV2 Scart

Composite Video out

S-Video out

The message “Video Output Mode

Progressive Scan” will appear.

■

When the HDMI cable is connected, other

A/V output does not operate.

NOTE

Video Output Mode

Progressive Scan

■

When the HDMI cable is connected, this

screen is not displayed.

■

Progressive setting is only available when

the Video Out is set to Component.

■

Progressive setting is only available when

the DVD recorder is in stop mode.

■

If the P.SCAN button on the DVD

recorder’s front panel is pressed during

playback, the message “This function is

possible only on stop mode” appears on

the screen.

34- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Canceling the Progressive

scan

Setting up the

Display(Video) Options

This function allows you to setup the TV screen settings.

With the unit in Stop mode, press the

P.SCAN button on the front of the DVD

Recorder.

With the unit in Stop mode/No Disc mode,

press the MENU button.

The message “Press [Yes] to confirm Interlace scan

mode. Otherwise press [No]” will appear.

Press the œ √ buttons to select Yes, and then press

the OK button.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Timer Record

Video Plus+ Extended : Off

√

Press [Yes] to confirm Interlace scan mode.

Otherwise press [No]

MOVE

RETURN

EXIT

Yes

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

The message “Please set your TV to

Interlaceinput.Todeactivate, press[STOP]

key.” will appear. Press the OK button.

System

√

NOTE

Clock Set

Language

Audio

Video

Parental Control

Install

MOVE

RETURN

EXIT

Please set your TV to Interlace input,

To deactivate, press [STOP] key.

Press the …† buttons to select Video, then

press the OK or √ button.

Video setup menu will be displayed.

Video

No Disc

Programme

Setup

The message “Video Output Mode Interlace

Scan” will appear.

TV Aspect

: 16:9 Wide

: Off

√

3D Noise Reduction

HDMI/DVI Resolution : 576P

Video Output

Component

√

Video Output Mode

Interlace Scan

MOVE

RETURN

EXIT

Press the …† buttons to select the desired

video option, then press the OK or √ button.

Video

No Disc

Programme

Setup

TV Aspect

: 4:3 Letter Box

4:3 Letter Box

√

4:3 Pan-Scan

: Off

3D Noise Reduction

ꢀ

Do not press the P.SCAN button if you

16:9 Wide

HDMI/DVI Resolution : 576P

√

Video Output Component

are using a TV that does not support

Progressive mode. Nothing will be

displayed on the screen if pressed.

ꢀ

If you press the P.SCAN button by

MOVE

RETURN

EXIT

mistake when your TV does not support

Progressive mode, you need to release

the Progressive mode. To release the

Progressive mode, press the P.SCAN

button on the front panel 3 times.

Press the …† buttons to select the desired

item, then press the OK or √ button.

The screen will recover after the PSO

LED on the front panel display turns off.

ꢀ

Press the RETURN or œ button to return

to the previous menu. Press the MENU

NOTE

button to exit the menu.

English -35

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI/DVI Resolution

Display(Video) Options

This function depends on disc type. It may not work for

some disc types.

This setting is used when the DVD recorder is connected

by HDMI or DVI with Display devices (TV, projector, etc).

Video

No Disc

Programme

Setup

TV Aspect

: 4:3 Letter Box

: Off

√

TV Aspect

3D Noise Reduction

HDMI/DVI Resolution : 576P

576p

√

Video Output

Component

720p

Depending on the type of television you have, you may

want to adjust the screen setting. (aspect ratio)

1080i

MOVE

RETURN

EXIT

Video

No Disc

Programme

Setup

TV Aspect

: 16:9 Wide

4:3 Letter Box

√

4:3 Pan-Scan

: Off

3D Noise Reduction

•

576p : 720 x 576

720p : 1280 x 720

1080i : 1920 x 1080

16:9 Wide

HDMI/DVI Resolution : 576P

√

Video Output Component

●

MOVE

RETURN

EXIT

Menu screen will zoom out to 2/3 at

1080i.

NOTE

• 4:3 Letter Box : Select when you want to see the total

16:9 ratio screen DVD

Output selection

supplies, even though you have a TV

with a 4:3 ratio screen.

• Connect the DVD Recorder to your TV via HDMI.

Set your TV's input to HDMI.

Black bars will appear at the top and

bottom of the screen.

• Press the P.SCAN button while the unit is in Stop mode

to select the HDMI output resolution as follows:

• 4:3 Pan - Scan : Select this for conventional size TV

when you want to see the central

portion of the 16:9 screen. (Extreme left

and right side of movie picture will be

cut off.)

576p

●

720p

● 1080i.

●

Progressive scan automatically activates

when HDMI is connected.

• 16:9 Wide : You can view the full 16:9 picture on your

widescreen TV.

NOTE

There will be no HDMI video and audio

outputs unless progressive scan function

is activated.

●

3D Noise Reduction (motion adaptive noise

reduction)

Consult your TV User’s Manual to find out

if your TV supports Progressive Scan.

If Progressive Scan is supported, follow

the TV User’s Manual regarding

Progressive Scan settings in the TV’s

menu system.

Video

No Disc

Programme

Setup

TV Aspect

: 16:9 Wide

√

3D Noise Reduction

: Off

Off

HDMI/DVI Resolution : 576P

●

If Video Output is set incorrectly, the

screen may be blocked.

Video Output

Component

√

The resolutions available for HDMI/DVI

output depend on the connected TV or

projector. For details, see the user’s

manual of your TV or projector.

MOVE

RETURN

EXIT

●

When the resolution is changed it may

take a few seconds for a normal image to

appear.

●

On : Provides a clear picture through noise

reduction (for recording).

Off : Normal

If you set the HDMI output resolution

720p or 1080i, HDMI output provides

better picture quality.

DivX playback screen output can only be

done in 576p.

36- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK or √ button to select

Setting up the Parental

Control

Password.

Parental Control

No Disc

Programme

Setup

Password

:OOffff

√

The Parental Control function works in conjunction with

DVDs that have been assigned a rating which helps

you control the types of DVDs that your family watches.

There are up to 8 rating levels on a disc.

MOVE

RETURN

EXIT

Press the …† buttons to select On or Off,

then press the OK or √ button.

With the unit in Stop mode/No Disc mode,

press the MENU button.

Timer Record

No Disc

Programme

Setup

Video Plus+

√

Timer Record

Video Plus+ Extended : Off

√

ꢀ

Press the RETURN or œ button to return

to the previous menu. Press the MENU

button to exit the menu.

NOTE

MOVE

RETURN

EXIT

If you forgot your password

Press the …† buttons to select Setup, then

press the OK or √ button.

Setup

No Disc

Programme

Setup

Remove the disc.

System

√

Clock Set

Language

Audio

Video

Parental Control

Install

Press and hold

for 5 seconds or more.

(FF) on the front panel

MOVE

RETURN

EXIT

Press the …† buttons to select Parental

Control, then press the OK or √ button.

Parental Control

No Disc

Programme

Setup

Create the password

RETURN

EXIT

NUMBER

Enter the 4-digit password using the 0 to 9

buttons on the remote control.

The ‘Confirm the password.’ message will be displayed.

Enter your password again.

Parental Control

No Disc

Programme

Setup

Confirm the password

NUMBER

RETURN

EXIT

English -37

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Rating Level

About the Change Password

Press the …† buttons to select Rating

Press the …† buttons to select Change

Level.

Password.

Parental Control

No Disc

Parental Control

No Disc

Programme

Setup

Programme

Setup

Password

: On

√

Password

: On

√

Rating Level

Change Password

: Level 1 Kids

Rating Level

Change Password

: Level 1 Kids

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

Press the OK or √ button.

The rating level will be displayed.

The 'Enter the password.' message will be displayed.

Parental Control

Change Password

No Disc

Programme

Setup

No Disc

Programme

Setup

Level 8 Adults

Password

:On

√

Level 7

Rating Level

Change Password

: Level 1 Kids

Level 6

Enter the password

Level 5

Level 4

Level 3

Level 2

Level 1 Kids

MOVE

RETURN

EXIT

NUMBER

RETURN

EXIT

Enter the 4-digit password using the 0 to 9

buttons on the remote control.

The ‘Confirm the password.’ message will be displayed.

Enter your password again.

Press the …† buttons to select Rating

Level you want, then press the OK or √

button.

For example, if you select up to Level 6, discs that

contain Level 7, 8 will not play. A larger number

indicates that the programme is intended for adult use

only.

Change Password

No Disc

Programme

Setup

Confirm the password

NUMBER

RETURN

EXIT

ꢀ

See page 37 if you forgot your password.

NOTE

38- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Recording

This DVD recorder can record on various types of

discs. Before recording, read the following instructions

and select the disc type according to your preference.

Recording

Recordable discs

This recorder can record on the following discs.

This section shows various DVD recording

methods.

DVD-RAM

DVD-RW

DVD-R

ꢁ

DVD-RWs and DVD-RAMs are rewritable.

DVD-Rs are non-rewritable

Compatibility between Samsung and Other

Company’s Recorder

Disc Types

DVD-RAM

Recording

format

Recording

Device

Samsung

Finalising

Additional Recording in

Samsung Recorder

Recordable

VR Mode

Other Company

Recordable

finalised

not finalised

finalised

not finalised

finalised

not finalised

finalised

not finalised

finalised

not finalised

finalised

Not recordable

Recordable

Not recordable

Recordable

Not recordable

Recordable

Not recordable

Recordable

Samsung

Other Company

Samsung

VR Mode

DVD-RW

V Mode

Other Company

Samsung

DVD-R

Not recordable

Other Company

not finalised

Before Recording ...........................................39

Recording the current TV programme

you are watching............................................41

ꢀ

Finalise

- This closes the DVD-R/RW so no

additional recording can be done.

NOTE

Recording from external equipment

you are watching............................................43

ꢀ

Unfinalise

- This allows additional recording on a

DVD-RW disc originally recorded on the

DVD Recorder.

- A DVD-RW disc that has been recorded

by DAO(Disc At Once) in a PC cannot

be unfinalised.

- A DVD-RW disc that has been recorded

in Video Mode of a different maker’s

recorder cannot be unfinalised.

- A DVD-R disc cannot be unfinalised.

Copying from a Camcorder ...........................44

Making a One Touch Recording (OTR)..........45

Making a Timer Recording .............................46

Flexible Recording (for Timer recording only) .. 47

Editing the Scheduled Record List.................47

Deleting the Scheduled Record List...............48

Using the Video Plus+ Feature ....................49

Video Plus+ Extended....................................50

Recording the Standard Timer List ................50

English -39

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Formats

Since available functions differ depending on the disc type,

select a disc that best fits your preferences; When you

insert an unused disc, the following message appears.

DVD-RAM: Use after formatting the disc.

Mode

Characteristic

Recording Times

Data Rates

Select when the

Approx. 1 hour

(high quality mode) video quality is

important.

about 8 Mbps

Select to record in

Approx. 2 hours

(standard quality mode) standard quality.

about 4 Mbps

Select when a long

recording time is

(long recording mode)

required.

Approx. 4 hours

Unformatted Disc

Do you want to format this disc?

about 2 Mbps

Yes

Select when a longer

Approx. 6 hours/

about 1.2 Mbps

Approx. 8 hours/

recording time is

(extended mode)

required.

about 0.8 Mbps

DVD-RW: When a blank disc is first inserted, the

message “Do you want to initialize this disc?”

will appear.

for timer recording only Approx 60 to 480 Min

(Flexible Recording) see page 47.

Approx 0.8 to 8Mbps

When Yes is selected, the disc will be

formatted in VR Mode.

Unrecordable video

Video with copy protection cannot be recorded on this

DVD Recorder.

Uninitialized Disc

When the DVD Recorder receives a copy guard signal

while recording, recording stops and the following

message appears on the screen.

Do you want to initialize this disc?

Yes

If you want to format in either VR Mode or

Video Mode, refer to Formatting a Disc on

page 83.

You cannot record copy protected movie.

Disc Manager

DVD-RW(VR)

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Disc manaCgheorose the recording format for DVD-RW.

Disc Finalise

Programme

Setup

Delete All Title Lists

DVD-VR DVD-V

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may

have one of the following three signal types, Copy-Free,

Copy-Once and Copy-Never. If you want to record a

copy-once type programme, use DVD-RW with CPRM

in VR Mode and DVD-RAM.

MOVE

RETURN

EXIT

DVD-R: Formatting DVD is unnecessary and only Video

Mode Recording is supported

Signal type

Copy-Free

Copy-Once

Copy-Never

Media

DVD-RW(Ver.1.1)

DVD-RW(Video mode)/-R

DVD-RW(Ver.1.1)

with CPRM

ꢁ

Chapters will be created automatically when you

finalise recording on DVD-R / DVD-RW discs in Video

mode. The chapter’s length (interval between

chapters) varies according to the recording mode.

Simple editing (erasing titles/changing title name)

VR mode

Video mode

DVD-R

ꢁ

DVD-RW(VR mode)/-RAM

DVD-RAM(Ver.2.0)

ꢁ

This mode allows multiple editing functions (such as

deletion of the whole title, partial deletion of a title, etc.)

Various editing options using a created Playlist

Once “Copy Once” has been recorded, recording

cannot be done anymore.

ꢁ

- Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the

media on which it is recorded. It is supported by some

DVD recorders, but not by many DVD players. Each

blank recordable DVD has a unique 64-bit media ID

etched in the BCA. When protected content is recorded

onto the disc, it can be encrypted with a 56-bit C2

(Cryptomeria) cipher derived from the media ID.

During playback, the ID is read from the BCA and used

to generate a key to decrypt the contents of the disc.

If the contents of the disc are copied to other media, the

ID will be absent or wrong and the data will not be

decryptable.

Recording Mode

Select one of four recording modes by pressing the REC

MODE button repeatedly while the DVD recorder is in Stop

mode for the desired recording time and picture quality.

In general, picture quality improves as the recording time

decreases. In FR mode, the most suitable record mode is

adjusted automatically, according to remaining time on the

disc and length of the timer recording.

This function is selected only one mode in XP, SP, LP and

EP modes and you can use this mode for timer recording.

40- English

Download from Www.Somanuals.com. All Manuals Search And Download.

About INFO Key

Recording the current TV

programme you are

watching

Before you start

The INFO function allows you to view the current status

and progress of playback and recording. Depending on

the disc type and status, the displayed screen may be

different.

Check that the disc has enough available space for the

recording. Adjust the recording mode.

Checking the available disc

space (Disc Information)

When recording on an used disc, make sure that there

is enough disc space for recording. With DVD-RWs or

DVD-RAMs, you can free up disc space by erasing

titles.

Press the INFO button.

The display window of disc information appears.

Items in the display differ depending on the disc type

or recording format.

Press the OPEN/CLOSE button and place

a recordable disc on the disc tray.

DVD-RAM(VR)

Disc Name

Disc Info

Disc

Press the OPEN/CLOSE button to close

the disc tray.

Wait until “LOAD” disappears from the front panel

display.

If an unused DVD-RAM disc is used, you will be

prompted to format first. Make your selection using

the œ √ buttons, then press OK button.

(See page 40.)

Total Title

Total Playlist

Recordable Time 02:12 SP

Protection

Screen

Not Protected

Recording : PR 1 [SP]

12:00

01 JAN 2005 SAT

1. Disc Type

2. Current information display status

3. Disc Name

4. Total Titles : Total number of titles

5. Total Playlist : Total number of Playlists

Unformatted Disc

6. Recordable Time : The longest continuous

recording time in each of the recording

modes(approximately)

Do you want to format this disc?

Yes

7. Date : Current date and time

If an unused DVD-RW disc is used, whether to

initialize or not will be asked first. Make your selection,

then press the OK button. (See page 40.)

Uninitialized Disc

Do you want to initialize this disc?

Yes

English -41

Download from Www.Somanuals.com. All Manuals Search And Download.

To stop recording

Press the PROG ( / ) or number

(

~ ) buttons to select the current

Press the STOP ( ) button to stop or finish a

recording in progress.

programme you want to record.

When using DVD-RAM/DVD-RW/DVD-R discs, the

message ‘Updating the information of disc.

Press the REC MODE button repeatedly,

(or press the REC MODE button, then

press the …† button) to select the

recording speed(quality).

Please wait for a moment’ is displayed.

ꢀ

You can not change the recording mode

and the PROG while recording.

NOTE

ꢀ

Recording will stop automatically if there

is no free space left for recording.

Record Mode SP (02:12)

Up to 99 titles can be recorded onto a

disc.

Recording will stop automatically if a copy

protected image is selected.

DVD-RAM/DVD-RW discs must be

formatted before starting to record.

Most new discs are sold unformatted.

Press the REC button.

Information concerning the channel is displayed on

the screen, then recording begins.

ꢀ

Do not use DVD-R authoring discs with

this DVD recorder.

Icon( ) is displayed on the front panel.

Recording

[SP]

To view the current status of the disc and progress of

recording : Press the INFO button, the information

about the disc will appear.

DVD-RAM(VR)

Disc Name

Disc Info

Total Title

Total Playlist

Recordable Time 02:12 SP

Protection

Screen

01 JAN 2005 SAT

Not Protected

Recording : PR 1 [SP]

12:00

Press the INFO button once again to view

information about the recording.

DVD-RAM(VR)

Name

Recording Info

01/JAN/2005 12:00 PR

Recording Title

Created Time

Recording Time

01/JAN/2005 12:00

00:02:05

01 JAN 2005 SAT

12:00

42- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the REC button.

Recording from external

equipment you are

watching

To pause recording

Press the

button to pause a recording in progress.

Press the

recording.

button again to resume

You can switch channels by pressing the PROG

buttons while recording pauses.

Before you start

(

)

Check that the disc has enough available space for the

recording. Adjust the recording mode.

To stop recording

Press the STOP ( ) button to stop or finish a

recording in progress.

Press the OPEN/CLOSE button, place a

recordable disc on the disc tray.

When using DVD-RAM/DVD-RW/DVD-R discs, the

message ‘Updating the information of disc.

Please wait for a moment’ is displayed.

Press the OPEN/CLOSE button to close

the disc tray.

Wait until “LOAD” disappears from the front panel

display.

ꢀ

You can not change the recording mode

If an unused DVD-RAM disc is used, whether to

format or not will be asked first. (See page 40)

If an unused DVD-RW disc is used, whether to

initialize or not will be asked first. (See page 40)

and input source while recording or

Pause.

NOTE

ꢀ

Recording will stop automatically if

there is no free space left for recording.

Up to 99 titles can be recorded onto a

disc.

Press the INPUT button to select the input

source according to the connection you

made.

The front panel display changes in the following

sequence:

Recording will stop automatically if a

copy protected image is selected.

DVD-RAM/DVD-RW discs must be

formatted before starting to record.

Most new discs are sold unformatted.

PR Number

AV1

AV2

AV3

ꢀ

Do not use DVD-R authoring discs with

this DVD recorder.

If you connect a digital camcorder, press the

INPUT button to select DV. (See page 44)

Press the REC MODE button repeatedly,

(or press the REC MODE button, then

press the …† button) to select the

recording speed(quality).

Record Mode SP (02:12)

English -43

Download from Www.Somanuals.com. All Manuals Search And Download.

Select the Play icon on the upper part of the

screen to playback the camcorder and find

the starting position to copy.

Copying from a

Camcorder

You can press the PLAY button of the remote control

to play the camcorder.

To start recording, use the œ √ to select

( G ) icon in the top side of the screen, then

press the OK button.

You can press the REC button of the remote control

to start recording. To display playback related icons

on the screen, press any direction button on the

remote control.

You may control the Camcorder using the IEEE1394

(DV) interface.

Before you start

Check that the disc has enough available space for

the recording. Adjust the recording mode.

To stop recording

Press the STOP ( ) button to stop or finish a

recording in progress.

Press the OPEN/CLOSE button, place a

recordable disc on the disc tray.

When using DVD-RAM/DVD-RW/DVD-R discs, the

message ‘Updating the information of disc. Please

wait for a moment’ is displayed

Press the OPEN/CLOSE button to close

the disc tray.

Wait until “LOAD” disappears from the front panel

display.

ꢀ

You can not change the recording mode and

input source while recording.

NOTE

If an unused DVD-RAM disc is used, whether to

format or not will be asked first. (See page 40.)

If an unused DVD-RW disc is used, whether to

initialize or not will be asked first. (See page 40.)

ꢀ

Recording will stop automatically if there is

no free space left for recording.

ꢀ

Up to 99 titles can be recorded onto a disc.

Recording will stop automatically if a copy

protected image is selected.

Press the REC MODE button repeatedly,

(or Press the REC MODE button, then

press the …† button) to select the

recording speed (quality).

ꢀ

DVD-RAM/DVD-RW discs must be

formatted before starting to record. Most

new discs are sold unformatted.

Do not use DVD-R authoring discs with this

DVD recorder.

Record Mode SP (02:12)

Press the INPUT button to select DV.

If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the

screen.

The DV device is connected.

MOVE

RETURN

44- English

Download from Www.Somanuals.com. All Manuals Search And Download.

To view the current status of the disc and progress

of recording : Press the INFO button, and

information about the disc will appear.

Making a One Touch

Recording (OTR)

DVD-RAM(VR)

Disc Name

Disc Info

Total Title

Total Playlist

Recordable Time 02:12 SP

Protection

Screen

01 JAN 2005 SAT

Not Protected

Recording : PR 1 [SP]

12:00

You can set the DVD Recorder to record in 30-minute

increments by pressing the REC button.

Press the INFO button once again.

Then you can check the information about the title

being recorded.

If you want to record a TV channel, press

the PROG (

) or number buttons to

DVD-RAM(VR)

Name

Recording Info

01/JAN/2005 12:00 PR

select a desired channel.

If you want to record through a

Recording Title

Created Time

Recording Time

01/JAN/2005 12:00

00:02:05

connected external component, press the

INPUT button to select an appropriate

external input (AV1, AV2, AV3 or DV).

01 JAN 2005 SAT

12:00

TV PROGRAMME: 1 to 99

Press the REC button to start recording.

30 seconds before the recording is done, a

message asking whether you want the recorder to

power off when the recording is done, will appear

on your screen.

OTR Mode

0:30

OTR is going to be ended soon

and power will be turned off automatically.

Press [OK] button to continue to use DVD-Recorder.

Press the REC button repeatedly to adjust

the desired recording time.

0:30

1:00

... 8:00

Off

To stop recording

Press the STOP ( ) button. The message “Do you

want to stop recording?” is displayed.

ꢀ

The timer counter decreases by the

minute from 8:00 to 0:00, then the DVD

Recorder stops recording.

NOTE

Do you want to stop recording?

Yes

Press the œ √ buttons to select Yes, then press the

OK button.

Or press the STOP button again.

English -45

Download from Www.Somanuals.com. All Manuals Search And Download.

• Source : The video input source (“AV1”, “AV2”,

“AV3”), or the broadcasting

Making a Timer Recording

channel you want to make a timer

recording from.

• Date : Timer Recording allows setting the

recording time within one month period. Set the

recording day. (day/month)

01/JAN(SAT)

02/JAN(SUN)

03/JAN(MON)

Every Day

MON-SAT

MON-FRI

Before you start

1. Check the antenna cable is connected.

2. Check the remaining time of the disc.

3. Check the date and time are correct.

Make sure the Clock (Setup-Clock Set) must be set

before you proceed with a timer recording.

(See page 25)

30/JAN(SUN)

31/JAN(MON)

Every SAT

Every SUN

• Start/End Time : Start and end time of the timer

recording.

• Mode (Recording Mode) :

With the unit in Stop mode, press the

- FR (Flexible Recording) : In FR mode, the most

suitable record mode is adjusted automatically,

according to remaining time on the disc and length

of the timer recording. This function is selected

only one mode in XP, SP, LP and EP modes.

- XP (high quality) : Select when video quality is

important. (Approx. 1 hour)

TIMER button.

Timer Record

DVD-RAM(VR)

Video Plus+

√

Disc Navigation

Playlist

Timer Record

Video Plus+ Extended : Off

√

Disc manager

Programme

Setup

- SP (standard quality) : Select to record in standard

quality. (Approx. 2 hours)

- LP (low quality) : Select when a long recording

time is required.(Approx. 4 hours)

MOVE

RETURN

EXIT

- EP (extended) : Select when a longer recording

time is required. (Approx.6 hours or 8 hours)

Using the MENU button.

With the unit in Stop mode, press the MENU

button.

• PDC : PDC(Programme Delivery Control)

Press the …† buttons to select Programme, then

press the OK or √ button.

Press the …† buttons to select Timer Record.

function.

- If you set this function on, you can control the

starting and ending time of recording by special

signal included in the broadcasting signal.

If a TV programme is shortened or starts earlier or

later than scheduled, this function synchronizes

the starting and ending time of recording with the

actual broadcasting time automatically.

- Set up the start-time EXACTLY according to the

published TV schedule. Otherwise the timer

recording will not operates.

Press the OK or √ button.

• The Timer Recording screen is displayed.

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

Date

Start

End

Mode PDC Edit

01 ---- -- --- -^N-^o:^.-⁰-¹--:-- -- --

√

Source

Date

Start

End Mode PDC

- Do not select PDC unless you are sure the

programme you wish to record is broadcast with

PDC.

PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP

Recordable Time 02:12 SP

Off

MOVE

RETURN

EXIT

ꢀ

When you are recording at EP mode on a

DVD-RW(V)/-R disc, it may not record the

full 6 or 8 hours because the DVD

recorder uses the VBR(Variable Bit Rate)

ENCODING system. For example, if you

record a programme with a lot of action, it

uses a higher bit rate which in turn

consumes more disc memory.

Set timer recording option.

• Fill the input items using the arrow buttons and

number buttons.

œ √ : Moves to the previous/next item,

…†, Number buttons : Sets a value.

NOTE

46- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button.

will appear on the front panel. It means that a

timer recording is registered.

Editing the Scheduled

Record List

If the timer settings overlap

The programmes are recorded in order of priority.

If timer recording is set for the first programme

and then again for the second programme and

both programmes overlap, the following message

will appear on the screen: “This setting is identical

with 1”The message shows that the first

programme has priority. After recording of the first

programme is complete, the second programme

starts being recorded.

Follow these directions to edit the scheduled record list.

To exit without saving the current setting

Press the MENU button.

With the unit in Stop mode, press the

To return to the previous menu

Press the RETURN button if you don’t want to set

a timer recording.

TIMER button.

Timer Record

DVD-RAM(VR)

Video Plus+

√

Disc Navigation

Playlist

Timer Record

Video Plus+ Extended : Off

√

Disc manager

Programme

Setup

Turn the power off to finish the Timer

Recording setting. Timer Recording will

not work when the power is on.

will blink if disc is not inserted.

MOVE

RETURN

EXIT

Using the MENU button.

ꢀ

The timer recording time may differ from

With the unit in Stop mode mode, press the MENU

button.

the set time depending on disc status

and overall timer recording status (for

example, recording times overlapping, or

when the previous recording ends within

2 minutes before the start time of the next

recording.)

NOTE

Press the …† buttons to select Programme, then

press the OK or √ button.

Press the …† buttons to select Timer Record.

ꢀ

Press the OK or √ button.

You can make the Timer Recording up to

12 programmes.

Press the RETURN button to close the

Timer Recording screen.

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

Date

Start

End

Mode PDC Edit

01 ---- -- --- -^N-^o:^.-⁰-¹--:-- -- --

√

Flexible Recording

Source

Date

Start

End Mode PDC

PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP

Recordable Time 02:12 SP

Off

(for Timer recording only)

MOVE

RETURN

EXIT

Press the …† buttons to select the number

of the timer recording you want to edit, then

press the OK or √ button.

In FR mode, the most suitable record mode is adjusted

automatically, according to remaining time on the disc and

length of the timer recording. This function is selected only

one mode in XP, SP, LP and EP modes and you can use

this mode for timer recording.

The Edit and Delete items are displayed.

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

Date

Start

End

Mode PDC Edit

01 PR 01 01 JAN 12 : 00 14 : 00 SP Off

Edit

√

02 ---- -- --- --:-- --:-- -- --

Delete

The FR mode recording setup is the same as Timer

Recording. When setting the mode in step 3, set FR

Mode.

MOVE

RETURN

EXIT

English -47

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the RETURN button to close the

Press the …† buttons to select Edit, then

Timer Recording screen.

press the OK or √ button.

The Timer Record Input item is displayed.

Edit the items you want to modify.

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

See the “Making a Timer Recording” section for

more information on Timer Recording Input items.

No. Source

Date

Start

End

Mode PDC Edit

01 ---- -- --- -^N-^o:^.-⁰-¹--:-- -- --

√

Source

Date

Start

End Mode PDC

PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP

Recordable Time 02:12 SP

Off

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

Date

Start

End

Mode PDC Edit

01 ---- -- --- -^N-^o:^.-⁰-¹--:-- -- --

√

MOVE

RETURN

EXIT

Source

Date

Start

End Mode PDC

PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP

Recordable Time 02:12 SP

Off

Press the …† buttons to select the number

of the timer recording you want to delete,

then press the OK or √ button.

MOVE

RETURN

EXIT

The Edit and Delete items are displayed.

Press the OK button to confirm the

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

edited setting.

Date

Start

End

Mode PDC Edit

01 PR 01 01 JAN 12 : 00 14 : 00 SP Off

Edit

√

02 ---- -- --- --:-- --:-- -- --

Delete

Press the MENU button after finishing the

operation.

The menu screen will disappear.

MOVE

RETURN

EXIT

Press the …† buttons to select Delete,

then press the OK or √ button.

You will be prompted with the delete confirm

message such as ‘Do you want to delete

No.01?’.

Deleting the Scheduled

Record List

Press the œ √ buttons to select Yes, then

press the OK button.

The selected entry will be deleted from the list.

Press the MENU button after finishing the

operation.

The menu screen will disappear.

Follow these directions to delete an entry from the

scheduled record list.

With the unit in Stop mode, press the

TIMER button.

Using the MENU button.

With the unit in Stop mode mode, press the MENU

button.

Press the …† buttons to select Programme, then

press the OK or √ button.

Press the …† buttons to select Timer Record.

Press the OK or √ button.

48- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button.

●

The information concerning the programme is

displayed.

Using the Video Plus+

Feature

●

When using the Video Plus+ function for the

first time with stored stations, the programme

number flashes. This one time, you must enter

the PR number manually by pressing the

…† buttons or number buttons.

Before presetting your DVD Recorder:

• Switch on both the television and your DVD Recorder.

• Check that the date and time are correct.

Up to twelve programmes can be preset.

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

Date

Start

End

Mode PDC Edit

01 ---- -- --- -^N-^o:^.-⁰-¹--:-- -- --

√

Source

Date

Start

End Mode PDC

PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP

Recordable Time 02:12 SP

Off

With the unit in Stop mode, press the

TIMER button. Press the …† buttons to

select Video Plus+, then press the OK or

√ button.

MOVE

RETURN

EXIT

Scheduled Record List

Recordable Time 02:12 SP

DVD-RAM(VR)

No. Source

Date

Start

End

Mode PDC Edit

●

A message is displayed to allow you to enter the

Video Plus+ code.

01 PR 01 01 JAN 12 : 00 14 : 00 SP Off

02 ---- -- --- --:-- --:-- -- --

√

DVD-RAM(VR)

Disc Navigation

MOVE

RETURN

EXIT

Playlist

(Press [OK] button : Make Code.)

Disc manager

Programme

Setup

If the programme and times are correct,

press the OK button.

RETURN

EXIT

Turn the power off by pressing the

STANDBY/ON button to activate the timer

recording setting.

Using the MENU button.

With the unit in Stop mode, press the MENU

button.

●

Press the …† buttons to select Programme, then

press the OK or √ button twice.

Refer to pages 46~48 if you want to:

●

Check whether the timer Recording has set

correctly or not.

●

Cancel a preset recording.

Press the number buttons to enter the

code of the programme that you want to

record in your television magazine.

●

If you want to correct the Video Plus+ code that

you are entering:

●

The numbers next to each TV programme

Press the œ button until the digit to be corrected

is cleared.

Enter the correct digit.

listing in the magazines or newspapers

are Video Plus+ code numbers, which

allow you to programme your DVD

Recorder instantly with the remote

control. Enter the Video Plus+ code for

the programme you wish to record.

NOTE

●

Video Plus+ is a trademark of Gemstar

Development Corporation. The Video

Plus+ system is manufactured under

license from Gemstar Development

Corporation.

English -49

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Plus+ Extended

Recording the Standard

Timer List

When the start time in the Scheduled record list

reaches while the set is in power off, the set will be

powered on and start the recording automatically.

To prevent delays or overruns, DVD Recorder has a

function called Video Plus+ Extened allowing you to

extend the recording time by up to 60 minutes.

When the scheduled recording is operating,

With the unit in Stop mode, press the

the programme being recorded will not

display on TV.

MENU button.

Press the TV/DVD button if you want to see the

programmed being recorded on TV.

Disc Navigation

DVD-RAM(VR)

√

Disc Navigation Title List

Press the TV/DVD button again if you don’t want to

see the programmed being recorded on TV.

DivX

Playlist

Disc manager

Programme

Setup

Photo

Music

To stop Recording

Press the STOP( ) button, and a message that asks

whether to end recording or not will be displayed.

MOVE

RETURN

EXIT

Press the …† buttons to select Programme,

then press the OK or √ button.

Do you want to stop recording?

Yes

Timer Record

DVD-RAM(VR)

Video Plus+

√

Disc Navigation

Playlist

Timer Record

Video Plus+ Extended : Off

√

Disc manager

Programme

Setup

When Yes is selected: Recording stops

When No is selected: Recording continues

MOVE

RETURN

EXIT

Press the …† buttons to select Video

Plus+ Extended, then press the OK or √

button

ꢀ

If there is not enough disc space or a

copy prevention signal is received during

recording, recording will stop.

NOTE

Timer Record

DVD-RAM(VR)

Video Plus+

√

Disc Navigation

Playlist

Timer Record

√

Off

Video Plus+ Extended : Off

√

Disc manager

Programme

Setup

You cannot record copy protected movie.

MOVE

RETURN

EXIT

ꢀ

If there is no free disc space or the disc is

Press the …† buttons to select Video Plus+

Extended time, then press the OK or √

button.

not recordable, recording will not operate.

(You can record after replacing the disc.)

Press the MENU button after finishing the

operation.

50- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Playing

Read the following information before playing a disc.

Playback

Region code (DVD-Video only)

Both the DVD recorder and the discs are

coded by region. These regional codes must

match in order for the disc to play. If the codes

do not match, the disc will not play.

This section introduces basic functions of playback

and playback by disc type.

The Region Number for this DVD Recorder is

described on the rear panel of the DVD Recorder

Disc types that can be played

Disc Types

Disc Logo Recorded content

Disc Shape

Max. Playing Time

Single sided(12cm)

Double sided(12cm)

Single sided(8cm)

Double sided(8cm)

Single sided(12cm)

Single sided(8cm)

240

480

160

DVD-VIDEO

AUDIO + VIDEO

AUDIO-CD

DVD-RAM

AUDIO

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

2 (XP: Excellent Quality)

4 (SP: Standard Quality)

8 (LP: Long Playback)

12 or 16 (EP:Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

1 (XP: Excellent Quality)

2 (SP: Standard Quality)

4 (LP: Long Playback)

6 or 8 (EP:Extended)

Single-sided

12cm (4.7GB)

AUDIO + VIDEO

Double-sided

12cm (9.4GB)

DVD-RW

DVD-R

AUDIO + VIDEO

12cm (4.7GB)

DIGITAL OUT

D I G I T A L

Dolby Digital

DTS

Digital Audio

12cm (4.7GB)

JPEG

MP3

MPEG4

CD-R/RW

DVD-R/RW/RAM

Stereo

PAL broadcast

system in U.K,

France, Germany, etc.

●

Depending on the disc type, it may take

up to one minute to load.

NOTE

DivX

MP3

Discs that cannot be played

DVD-Video with a region number other than “2” or

“ALL”

●

Before Playing...................................................51

Playing a Disc...................................................52

Playing an Audio CD/MP3 ..............................61

Playing a Picture CD........................................65

Playing an MPEG4...........................................66

Playing the Title List..........................................67

●

12cm 2.6 GB and 5.2 GB DVD-RAM

3.9 GB DVD-R Disc for Authoring.

DVD-RAM, DVD-RW(VR mode) not recorded

following the Video Recording Standard

Unfinalised DVD-R, unfinalised DVD-RW(V mode)

recorded on other equipment.

●

DVD-ROM/DVD+RW/PD/MV-Disc, etc

CVD/CD-ROM/CDV/CD-G/CD-I

English -51

Download from Www.Somanuals.com. All Manuals Search And Download.

Place a disc gently into the tray with the

disc’s label facing up.

This DVD recorder can only operate with

discs that are compatible with DVD-RAM

Standard Version 2.0.

NOTE

Playback and/or recording may not work

for some types of discs, or when specific

operations, such as angle change and

aspect ratio adjustment, are being

performed. Information about the discs is

written in detail on the box. Please refer

to this if necessary.

Press the OPEN/CLOSE button to close

the disc tray.

Your DVD Recorder closes the disc tray and plays

the disc automatically.

The recorder does not play discs automatically after

the initial power on.

When the recorder is powered on and a disc is in

the tray, the DVD recorder will be activated and wait

in stop status.

Do not allow the disc to become dirty or

scratched. Fingerprints, dirt, dust,

scratches or deposits of cigarette smoke

on the recording surface may make it

impossible to use the disc for recording.

Press the PLAY button to start playback.

If you insert a MP3 Disc, your DVD Recorder will

display the file list on the screen and start playing.

If you insert a JPEG Disc, folders and files are

displayed in the thumbnail picture.

If you want the DVD recorder to play automatically

when it is powered on with a disc in the DVD

recorder, power on with the PLAY button.

DVD-RAM/RW/R discs may not be able to

play on some DVD Recorders, depending

on the DVD recorder, disc and the

condition of the recording.

Press the STOP button to stop playback.

When you stop playing disc, the recorder

Playing a Disc

remembers where you stopped. When

you press the PLAY button again, it will

pick up where you left off. (unless the disc

is removed or the DVD Recorder is

unplugged, or if you press the STOP

button twice.)

NOTE

Do not move your DVD Recorder while

playing, as this may cause damage to the

disc.

CAUTION

Make sure to press the OPEN/CLOSE

button to open or close the disc tray.

Do not push the disc tray while it is being

opened or closed, as this may cause a

product malfunction.

Do not place foreign materials on or in the

disc tray.

Some functions may perform differently or

be disabled depending on the disc type.

If this occurs, refer to the instructions

written on the disc case.

Be especially careful that children's

fingers are not caught between the disc

tray and the tray chassis when it closes.

Press the OPEN/CLOSE button.

You must only insert one DVD disc at a

time. Inserting two or more discs will not

allow playback and may cause damage to

the DVD recorder.

52- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Search Functions

Using the Disc Menu & Title Menu

Some discs contain a dedicated menu system that

allow you to select special functions for the title, such

as chapters, audio tracks, subtitles, film previews,

information on characters, etc.

For DVD-VIDEO discs

Press the DISC MENU button to enter the

disc menu of the disc.

Searching through a Chapter or Track

Move to the setup menu related to the playback

operation.

You can select the audio languages and the

subtitles provided by the disc.

Press the TITLE MENU button to move to

the title menu of the disc.

During play, press the SEARCH (

)

Use this button if the disc contains more than one

title. Some type of discs may not support the title

menu function.

button on the remote control.

Fast X 2 ©

Fast X 8 ©

Fast X 32 ©

Fast X 2

X 2 ©

Fast X 4 ©

DVD-VIDEO/

DVD-RAM/

DVD-RW/DVD-R

Fast X 16 ©

Fast X 128 ©

For DVD-RAM/RW/R discs

MPEG4

X 4 © X 8 ©

AUDIO CD

(CD-DA)

X 2

Press the TITLE LIST button to move to the

Title List.

You can scan the programme in reverse.

To return to normal speed playback, press the

button.

When you press and hold the SEARCH button.

Title List: Title List shows a list to help

NOTE

you select a title. Since the title

list consists of the information

on video that is actually

recorded, if one title is deleted,

that title cannot be played

again.

(

), playback is done at the default speed of 4X.

If you release the SEARCH button, playback is

performed at a normal speed.

The speed marked in this function may be different

from the actual playback speed.

Play List: This refers to a DVD recorder

of playback, which is made by

selecting a desired scene in

the entire Title List. When one

playlist is played, only the

No sound is heard during Scan(Search)

mode, except CDs (CD-DA).

NOTE

scene selected by the user will

play and then stop. Since only

the information necessary for

playing a desired scene is

included in a playlist, even if

that playlist is deleted, the

original recording will not be

deleted. (only VR mode)

English -53

Download from Www.Somanuals.com. All Manuals Search And Download.

About ANYKEY

Skipping Chapters or Tracks

G During play, you can search quickly

through a chapter or track.

During play, press the SKIP (

)

button on the remote control.

If you press the ❙œœ button,

it moves to the beginning of the chapter or track or

marker(DVD-RAM, DVD-RW(VR mode)).

The ANYKEY function allows you to easily search for a

desired scene by accessing title, chapter, track, time.

You can also change the subtitle and audio

settings and set some features including Repeat, Angle,

Zoom.

Pressing the button once again within 3 seconds

returns to the beginning of the previous chapter or

track or marker(DVD-RAM, DVD-RW(VR mode)).

If you press the √√❙ button,

it moves to the next chapter or track or marker

(DVD-RAM,DVD-RW(VR mode)).

Moving to a scene directly using the ANYKEY

Slow Motion Play

G If you want to move to a title, a chapter

or a track to find a desired scene.

In pause or step mode, press the SEARCH (

Press the ANYKEY button during

) button on the remote control.

playback.

G If you press the √√ button,

Slow 1/8 ©

Slow 1/4 ©

Slow 1/2

DVD-VIDEO

Title

1/10

Chapter

Time

G If you press the œœ button,

1/40

00:01:45

ENG

Off

Subtitle

Audio

Repeat

Angle

Slow 1/8 ©

Slow 1/4 ©

Slow 1/2

5.1CH

G To return to normal speed playback,

press the button.

1/1

Zoom

Off

MOVE

CHANGE

Press and hold the SEARCH (

) button during

pause, the disc will play slowly at a 1/4 speed. If the

button is released, the pause operation will resume.

Press the …† buttons to select Title,

Chapter or Track.

The speed marked in this function may be

different from the actual playback speed.

NOTE

Slow motion operates only in the forward

DVD-VIDEO

direction on MPEG 4 discs.

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

ENG

Step Motion Play

Audio

ENG

Off

5.1CH

Repeat

Angle

Zoom

1/1

Off

MOVE

CHANGE

Press the

button on the remote

control in the still mode.

Press the œ √ or number (0~9) buttons to

select the desired scene.

Press the OK button.

Each time the button is pressed, a new frame will

appear.

When

is pressed, the previous frame will be

activated.

When

is pressed, the next frame will be activated.

To return to normal speed playback, press the

button.

Step motion operates only in the forward

direction on MPEG 4 discs.

NOTE

54- English

Download from Www.Somanuals.com. All Manuals Search And Download.

G If you want to move to a desired time to

help you find a scene.

Using the Repeat Function

Press the ANYKEY button during

playback.

DVD-VIDEO

Title

1/10

1/40

00:01:45

ENG

Off

Chapter

Time

Subtitle

Audio

Repeat

Angle

5.1CH

1/1

Zoom

Off

MOVE

CHANGE

Playing Repeatedly(Repeat Playback)

Press the …† buttons to select Time.

Using the REPEAT button

DVD-VIDEO

Press the REPEAT button during playback.

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

ENG

Audio

ENG

Off

5.1CH

Repeat

Angle

Zoom

Repeat

Off

1/1

Off

NUMBER

MOVE

Enter the time in the sequence of hours,

minutes, seconds using the number

buttons, then press the OK button.

Press the REPEAT or …† buttons to select

Title or Chapter you want to play repeatedly.

Press the OK button.

This may not work for some discs.

When an audio CD(CD-DA) or an MP3

disc is inserted, according to a disc type,

the information display may not be

appear.

NOTE

Repeat

Title

The Time Search function does not

operate in some discs.

To make the screen disappear, press the

ANYKEY again

Chapter : Repeats the chapter that is playing.

Title : Repeats the title that is playing.

- To return to normal playback -

Press the REPEAT buttons to select Off,

then press the …† or REPEAT button and

press OK button.

Press the CANCEL button to return to normal

playback.

English -55

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the REPEAT button repeatedly to

select Track or Disc you want to play

repeatedly.

Using the ANYKEY button

Music

Press the ANYKEY button during

Repeat : Track

01. TRACK 1

Play Option : Normal

00 : 52

playback.

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

DVD-VIDEO

Title

1/10

Chapter

1/40

01/12

Time

00:01:45

Subtitle

Off

Audio

ENG

Title

1/1

5.1CH

MOVE

EXIT

Repeat

Angle

Zoom

Off

MOVE

CHANGE

To return to normal playback

Press the REPEAT button repeatedly to

select Off.

Press the CANCEL button to return to normal

playback.

Press the …† buttons to select Repeat,

then press the œ √ buttons to select Title or

Chapter you want to play repeatedly.

For A-B Repeat, refer to page 57.

DVD-VIDEO

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

Off

Audio

ENG

Title

1/1

5.1CH

Using the ANYKEY button

Repeat

Angle

Zoom

Off

MOVE

Press the ANYKEY button during

playback.

Repeat is highlighted.

Press the OK button.

Music

To make the screen disappear, press the ANYKEY or

RETURN button. Repeat play allows you to repeat a

title or chapter.

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

01/12

DVD-RAM, DVD-RW(VR mode),

unfinalised DVD-R and unfinalised DVD-

RW (Video mode) do not repeat a

chapter.

NOTE

MOVE

RETURN

EXIT

Press the REPEAT or …† buttons to select

Track or Disc you want to play repeatedly.

Press the OK button.

For MP3 discs, you can select Track,

Folder or Disc.

Playing Repeatedly(Repeat Playback)

Using the REPEAT button

- To return to normal playback -

Press the REPEAT button repeatedly to

Press the REPEAT button during playback.

select Off.

Press the CANCEL button to return to normal

playback.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

01/12

MOVE

EXIT

56- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Subtitle

Subtitle languages may not work depending on the disc

type. This is only available during playback.

Playing a Certain section Repeatedly(A-B Repeat Playback)

(VR mode)

Using the ANYKEY button

Using the SUBTITLE button

Press the ANYKEY button during

Press the SUBTITLE button during

playback.

Subtitle

ENG

DVD-VIDEO

Title

1/10

1/40

00:01:45

Off

Chapter

Time

Subtitle

Audio

Repeat

Angle

ENG

Title

1/1

5.1CH

Zoom

Off

MOVE

CHANGE

Press the SUBTITLE or …† buttons to

select the desired subtitle language.

To make the screen disappear, press the CANCEL or

RETURN button.

Press the …† buttons to select Repeat, then

press the √ button to select A-B.

DVD-VIDEO

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

Off

Audio

Using the ANYKEY button

ENG

A-B

1/1

5.1CH

Repeat

Angle

Zoom

Off

MOVE

Press the ANYKEY button during

playback.

DVD-VIDEO

Title

1/10

Press the OK button.

Chapter

1/40

Time

00:01:45

Subtitle

Off

Audio

ENG

Title

1/1

5.1CH

Repeat

Angle

Zoom

Press the OK button at the point where you

want the repeat play to start (A), then press

it again at the point where you want the

repeat play to stop (B).

Off

MOVE

CHANGE

Repeat playback of the A-B section starts.

Press the …† buttons to select Subtitle,

then press the œ √ buttons to select the

desired subtitle language.

- To return to normal playback -

Select “Off” on the Repeat item.

Press the CANCEL button to return to normal

playback.

DVD-VIDEO

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

ENG

Audio

ENG

Off

5.1CH

Repeat

Angle

Zoom

1/1

Off

MOVE

CHANGE

If you set point (B) before five seconds

has lapsed, the prohibition mark ( ) will

appear.

NOTE

The subtitle display may be different

depending on the disc type.

NOTE

Audio CDs(CD-DA), MP3 and MPEG4

discs do not support the Repeat A-B

function.

Some discs allow you to select the

language for the disc menu only.

English -57

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Audio language

Changing the Camera Angle

Audio languages may not work depending on the disc

type. This is only available during playback.

When a DVD-VIDEO contains multiple angles of a

particular scene, you can select the Angle function.

This is only available during playback.

If the disc contains multiple angles, the ANGLE mark

appears on the screen.

(VR mode)

Using the AUDIO button

Press the ANYKEY button during playback.

Press the AUDIO button during playback.

Audio

ENG Dolby Digital 5.1CH

DVD-VIDEO

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

Off

Audio

ENG

Off

5.1CH

Repeat

Angle

Zoom

1/3

Off

MOVE

CHANGE

Press the AUDIO or …† buttons to select

Press the …† buttons to select Angle, then

press the œ √ or number buttons to select

the desired angle.

the desired audio language.

DVD-VIDEO

Title

1/10

Using the ANYKEY button

Chapter

1/40

Time

00:01:45

Subtitle

ENG

Audio

ENG

Off

5.1CH

Repeat

Angle

Zoom

Press the ANYKEY button during

playback.

1/3

Off

MOVE

CHANGE

DVD-VIDEO

Title

1/10

Chapter

1/40

Time

00:01:45

This function is disc-dependent, may not

work on all DVDs.

Subtitle

Off

Audio

ENG

Title

1/1

5.1CH

NOTE

Repeat

Angle

Zoom

This function does not work when a DVD

has not been recorded with a multi-

camera angle system.

Off

MOVE

CHANGE

Press the …† buttons to select Audio, then

press the œ √ buttons to select the desired

audio language.

DVD-VIDEO

Title

1/10

Chapter

1/40

Time

00:01:45

Subtitle

ENG

Audio

ENG

Off

5.1CH

Repeat

Angle

Zoom

1/1

Off

MOVE

CHANGE

Audio languages may be different

depending on the disc type.

NOTE

Some discs allow you to select the audio

language for the disc menu only.

58- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Zooming-In

Using Bookmarks

This feature lets you bookmark sections of a DVD-VIDEO

or DVD-R/-RW(V mode), so you can quickly find them.

Press the ANYKEY button during playback

(V mode)

or pause.

Press the MARKER button during

DVD-VIDEO

playback.

Title

1/10

1/40

00:01:45

Off

Chapter

Time

Subtitle

Audio

Repeat

Angle

Bookmark

ENG

Off

5.1CH

1/1

Zoom

Off

MOVE

CHANGE

MOVE

RETURN

Press the …† buttons to select Zoom, then

press the OK button. ( ) will be displayed.

Press the OK button when the desired

scene appears.

The number 1 is displayed and the scene is

memorized.

Bookmark

Press the …† œ √ buttons to move to the

MOVE

PLAY

CANCEL

RETURN

area you want to enlarge.

Press the OK button. The screen will be

enlarged to twice the normal size.

If you press the OK button again after the screen was

enlarged to twice the normal size, the screen size will

be enlarged to four times the normal size.

Press the œ √ button to move to the next

position.

Press the OK button when the desired

scene appears.

The number 2 is displayed and the scene is

memorized.

normal size

Bookmark

When the recording is done in EP mode,

the Zoom function is not supported except

when the recording has been done in V

mode.

NOTE

MOVE

PLAY

CANCEL

RETURN

Repeat above to bookmark other positions.

You can bookmark up to 10 scenes.

When the disc tray is opened and then

closed, bookmarks will disappear.

NOTE

English -59

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Markers

Playing back a bookmark

(VR mode)

Press the MARKER button during

playback.

Press the MARKER button during

playback.

Press the œ √ buttons to select a

bookmarked scene.

Marker

N:0

Bookmark

RETURN

MOVE

PLAY

CANCEL

RETURN

Press the OK button when the desired

scene appears.

The number 01 is displayed and the scene is

memorized.

Press the OK or

button to start

playing from the selected scene.

Clearing a bookmark

Marker

N:1

Press the MARKER button during

playback.

MOVE

PLAY

CANCEL

RETURN

Press the œ √ buttons to select a

bookmarked scene.

Press the œ √ button to move to the next

Bookmark

position.

Press the OK button when the desired

scene appears.

The number 02 is displayed and the scene is

memorized.

MOVE

PLAY

CANCEL

RETURN

Marker

01 02

N:2

Press the CANCEL button to delete the

selected bookmark.

Bookmark

MOVE

PLAY

CANCEL

RETURN

DVD-RAM or DVD-RW (VR Mode) discs have the

Marker function instead of the Bookmark function.

The Marker function allows you to mark up to 99

scenes. Since the scenes may be displayed as many

different pages, numbering is necessary. If a disc in

use is encoded with Disc Protection, Markers cannot

MOVE

RETURN

be set or deleted. Only playback is available.

60- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing back a Marker

Playing an Audio CD/MP3

Press the MARKER button during

playback.

Playing an Audio CD (CD-DA)/MP3

Each disc has a variety of menu functions available.

Press the œ √ buttons to select a

bookmarked scene.

Marker

01 02

N:2

Playing an Audio CD(CD-DA)

MOVE

PLAY

CANCEL

RETURN

Insert an audio CD (CD-DA) into the disc

tray.

The audio CD menu appears and the tracks (songs)

are played automatically.

Press the OK or

button to start

playing from the selected scene.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

If you press the button, it moves to the beginning of

the marker. Pressing the button once again within 3

seconds returns to the beginning of the previous

marker.

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

01/12

If you press the button, it moves to the next

marker.

MOVE

EXIT

-1 Press the …† buttons to select the track

you want to hear, then press the OK or √

Clearing a Marker

button.

Press the MARKER button during

-2 Press the number buttons to select the

playback.

track (song) and the track (song) is played

automatically.

Press the œ √ buttons to select a

bookmarked scene.

Press the CANCEL button to delete the

selected bookmark.

Audio CD(CD-DA) Screen Elements

Music

Marker

01 02 03 04 05 06 07 08 09 10 N:10

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

Marker

01 02 03 04 05 06 07 08 09

N:9

01/12

MOVE

EXIT

1. Repeat mode: Repeat off/Repeat Track/Repeat Disc

2. Current track (song): Displays the number of the

track currently being played.

MOVE

PLAY

CANCEL

RETURN

3. Displays the current play index and total track

number.

4. This shows the operating state of a disc and a

playback time corresponding to a portion that is

currently played.

5. Displays the track list (song list) and the playing time

of each track.

When a marker is cleared while DVD-RAM/-RW (VR

mode) is playing, marker numbers will change.

For example, if the 7th marker is cleared after ten

markers are registered, the marker numbers after

the eighth will automatically move ahead by one and

6. Button display.

7. Play Option: Normal, Random, Intro or Playlist

the 8th marker becomes the 7th.

English -61

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons on the Remote Control used for Audio CD(CD-DA) playback

Playing an MP3 Disc

Insert an MP3 Disc into the disc tray.

Disc Navigation

Programme

Setup

DivX

√

Photo

Music

MOVE

RETURN

EXIT

Press the …† buttons to select the Disc

Navigation, and then press the OK or √

button.

Disc Navigation

Programme

Setup

DivX

√

Photo

Music

MOVE

RETURN

EXIT

1. …†, 0~9: Selects a track (song).

2. √ : Plays the selected track (song).

3. OK button: Plays the selected track (song).

Press the …† buttons to select the Music,

and then press the OK or √ button.

4. ( ) button: Plays the next track.

5. ( ) button: Returns to the beginning of the current

track when pressed during playback. If pressed

again, your DVD recorder moves to and plays the

previous track.

If you press the this button within three seconds after

playback starts, the previous track will be played.

If you press the this button after three seconds, the

current track will be replayed from the beginning.

Music

Repeat : Off

Play Option : Normal

00 :22

Straight from the heart

ROOT

Bryan Adams

Bryan Adams_2

Straight from the heart

Run to you

ROOT

03/06

Heaven

MOVE

RETURN

EXIT

6. Press the (

) button: Fast Play (X2, X4, X8)

7. ( ) button: Stops a track(song).

8. ( ) button: Plays a track(song) or pauses

playback.

The MP3 menu appears and the tracks(songs) are

played automatically.

9. ANYKEY button: To select the top menu on screen

display (Repeat or Play Option).

-1 Press the …† buttons to select the track

(song) you want to hear, then press the

OK or √ button.

-2 Press the number buttons to select the

track (song) and the track (song) is played

automatically.

62- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Buttons on the Remote Control used for MP3 playback

MP3 Screen Elements

Music

Repeat : Off

Play Option : Normal

00 :22

Straight from the heart

ROOT

Bryan Adams

Bryan Adams_2

Straight from the heart

Run to you

ROOT

03/06

Heaven

MOVE

RETURN

EXIT

1. Repeat mode: Repeat off, Repeat Track, Repeat

Folder or Repeat Disc

2. Current track (song): Displays the name of the

track being played.

3. Displays the current folder and play index.

4. This shows the operating state of a disc and a

playback time corresponding to a portion that is

currently played.

5. Displays the information for the folder and its tracks.

6. Button display.

7. Play Option : Normal, Random, Intro or Playlist

1. …†, 0~9: Selects a track (song).

2. √ : Plays the selected track (song).

3. OK button: Plays back the selected track (song) or

displays the files in the selected folder.

4. RETURN button: Moves to the folder to which the

current song belongs.

5. ( ) button: Plays the next track.

6. ( ) button: Returns to the beginning of the current

track when pressed while playing. If pressed again,

your DVD recorder moves to and plays the previous

track.

If you press the this button within three seconds, the

previous track will be played.

If you press the this button after three seconds, the

current track will be replayed from the beginning.

7. ( ) button: Stops a track(song).

8. ( ) button: Plays a track(song) or pauses

playback.

9. ANYKEY button: To select the top menu on screen

display (Repeat or Play Option).

Files of one type: List of files and folders

appears in a defined order.

NOTE

Files of multiple types: Topmost GUI

menu screen (DISC NAVIGATION)

appears.

English -63

Download from Www.Somanuals.com. All Manuals Search And Download.

Play Option Mode

To Programme Tracks

The Play Option can be used with an audio CD or MP3

in the Play or Stop mode.

You can register a maximum of 30 tracks in the playlist.

Press the ANYKEY button during playback.

Repeat Mode will be highlighted.

Press the ANYKEY button during playback.

Repeat Mode will be highlighted.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

Music

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

01/12

RETURN

EXIT

MOVE

RETURN

EXIT

Press the œ √ buttons to select Play Option

During Stop, Play Option will be highlighted.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

Press the œ √ buttons to select Play Option

then press the …† buttons to select the

desired play option (Normal, Random, Intro

or Playlist).

Press the …† buttons to select Playlist and

then press the OK button.

Music

Repeat : Off

01. TRACK 1

Play Option : Normal

00 : 52

Press the …† buttons to select Tracks in

the order in which you want them to play

and then press OK button.

01. TRACK 1

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

4:39

4:31

4:30

3:53

4:23

4:24

Music

01/12

Repeat : Off

Play Option : Playlist

00 : 00

MOVE

RETURN

EXIT

01. TRACK 1

1. P_TRACK 1

2. P_TRACK 2

3. P_TRACK 3

4. P_TRACK 4

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

Press the OK button.

MOVE

RETURN

EXIT

Normal: Tracks on a disc are played in the order in

which they were recorded on the disc.

If you playlisted a wrong track, press the √

button, then press the …† buttons to select

wrong track, then press the CANCEL

button.

Random: The Random option plays a disc’s tracks in

random order. After a random list is generated and

played completely, another random list is generated

and played. Random Play is continued until the play

option is changed.

The wrong track will be removed.

Music

Intro: The first 10 seconds of each track will be

played. If you want to listen to the music that you

Repeat : Off

Play Option : Playlist

01 : 36

have selected, press the OK or

button.

01. TRACK 1

1. P_TRACK 1

2. P_TRACK 2

3. P_TRACK 3

02. TRACK 2

03. TRACK 3

04. TRACK 4

05. TRACK 5

06. TRACK 6

The play option will be changed to Normal Play.

When Intro Play is completed, Normal Play is

performed.

Playlist: The Playlist playback option allows you to

select the order in which you want tracks to play.

CANCEL

EXIT

MOVE

Press the PLAY button to playback the

playlist.

64- English

Download from Www.Somanuals.com. All Manuals Search And Download.

-1 If your press the PLAY( ) button, the

Playing a Picture

Slide show screen will appear.

Press the œ √ buttons to set the slide show speed,

then press the OK button.

Slide Show Speed

DSC01189

MOVE

Insert a JPEG into the disc tray.

RETURN

Disc Navigation

Programme

Setup

DivX

√

Photo

Music

-2 Press the œ √ buttons to select a picture

file in Album screen, then press the OK

button.

MOVE

RETURN

EXIT

Press the …† buttons to select the Disc

Navigation, and then press the OK or √

button.

DSC01189

MOVE

PHOTO

RETURN

Disc Navigation

Programme

Setup

DivX

√

Photo

Music

: Returns to the Album screen.

: The DVD recorder enters slide show mode.

Before the slide show can begin, the picture

interval (Slide show speed) must be set.

: Each time the OK button is pressed, the

picture rotates 90 degrees clockwise.

: Each time the OK button is pressed, the

picture is enlarged up to 4X(Four times the normal

size).

MOVE

RETURN

EXIT

Press the …† buttons to select the Photo,

and then press the OK or √ button.

(Normal © Zoom 2X © Zoom 4X © Zoom 2X ©

Normal)

Press the …† œ √ buttons to select a

picture.

Press the ANYKEY button to display or clear menus.

Photo

Index

ROOT / DSC01189

Slide Show

Page

MOVE

RETURN

EXIT

To see the next 6 pictures, press the button.

To see the previous 6 pictures, press the button.

English -65

Download from Www.Somanuals.com. All Manuals Search And Download.

MPEG4 Function Description

Playing an MPEG4

Function

Description

During play, press the

forward or backward 5 minutes.

button, it moves

Skip

(

)

During play, press the SEARCH (

and press again to search at a faster speed.

(2X, 4X, 8X)

) button

MPEG4 File is used to contain the audio and video

In pause or step mode, press the SEARCH

on the remote control. (1/8X, 1/4X, 1/2X)

button

data.

Slow Motion

Play

MPEG4 File with following extensions can be played.

- .AVI, .DIVX

Press the

still mode.

button on the remote control in the

Step Motion

Play

Insert an MPEG4 Disc into the disc tray.

This DVD recorder can play the following

video compression formats,

- MPEG4 Codec format : DivX 3.11 DivX 4.x

DivX 5.x DivX-Pro (without QPEL and

GMC)

Disc Navigation

Programme

Setup

DivX

√

NOTE

Photo

Music

- Audio format : .MP3, .MPEG, .WMA,

.LPCM, .AC3

MOVE

RETURN

EXIT

Supported subtitle file formats: .smi, .srt,

.sub, .psb, .txt, .ass (The subtitle file should

have exactly the same name to

Press the …† buttons to select the Disc

Navigation, and then press the OK or √

button.

corresponding MPEG4 file name)

Some MPEG4 files created on a personal

computer may not be play back.

That is why Codec Type, Version and

Higher resolution over specification is not

supported.

Disc Navigation

Programme

Setup

DivX

√

Photo

Music

MOVE

RETURN

EXIT

Press the …† buttons to select the DivX, and

then press the OK or √ button.

Press the …† buttons to select the avi file

(DivX), then press the OK, √ or

button.

DivX

[DivX].###.####.01.avi

MPEG4

[DivX].###.####.01.avi

MPEG4

00/01

MOVE

RETURN

EXIT

When MPEG4 file is played, you can use

following functions.

Pressing the STOP button once during playback will

display the file list, pressing the button again will exit the

menu screen.

66- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Disc

Navigation, then press the OK or √ button

twice.

Playing the Title List

The Title List screen is displayed.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 19/APR/2005 1 00:00:21

02 19/APR/2005 1 00:00:03

03 20/APR/2005 2 00:00:15

04 20/APR/2005 2 00:00:16

05 21/APR/2005 1 00:06:32

06 21/APR/2005 1 00:08:16

07 22/APR/2005 1 00:09:36

√

19/APR/2005 12:00 PR12

19/APR/2005

12:00

Follow these instructions to play back a scene from the

Title List.

MOVE

RETURN

EXIT

Using the TITLE LIST button

Press the …† buttons to select Title, then

press the OK or √ button.

The Edit menu is displayed on the right.

Press the TITLE LIST button.

The Title List screen is displayed.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 19/APR/2005 1 00:00:21

02 19/APR/2005 1 00:00:03

√

Title List

Length Edit

DVD-RAM(VR)

No. Title

03 20/APR/2005 2 00:00:15

Play

04 20/APR/2005 2

Rename

00:00:16

01 19/APR/2005 1 00:00:21

02 19/APR/2005 1 00:00:03

√

21/APR/2005 11:50 PR11

Delete

05 21/APR/2005 1 00:06:32

21/APR/2005

11:50

Edit

06 21/APR/2005 1 00:08:16

03 20/APR/2005 2 00:00:15

04 20/APR/2005 2 00:00:16

05 21/APR/2005 1 00:06:32

06 21/APR/2005 1 00:08:16

07 22/APR/2005 1 00:09:36

Protection

07 22/APR/2005 1 00:09:36

19/APR/2005 12:00 PR12

19/APR/2005

MOVE

RETURN

EXIT

12:00

MOVE

RETURN

EXIT

(Play, Rename, Delete, Edit, Protection : See

pages 70~73)

Press the …† buttons to select an entry

Press the …† buttons to select Play to play

you want to play from Title List, then press

the title list, then press the OK button.

the PLAY (

)

button.

The selected entry (title) will be played back.

√ Play

To stop title play, press the STOP button.

To return the title list screen, press the TITLE LIST

button.

Using the MENU button

To view the current status of the disc and progress of

playback : Press the INFO button, the information

about the disc will appear.

Press the MENU button.

DVD-RAM(VR)

Disc Name

Disc Info

Disc Navigation

DVD-RAM(VR)

√

Disc Navigation Title List

Total Title

Total Playlist

Recordable Time 02:12 SP

Protection

Screen

DivX

Playlist

Photo

Disc manager

Programme

Setup

Music

Not Protected

Playback

01 JAN 2005 SAT

12:00

MOVE

RETURN

EXIT

English -67

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the INFO button once again. Then you can

check the information about the title under playback.

Title List Screen Elements

DVD-RAM(VR)

Name

Playing Info

01/JAN/2005 12:00 PR

3 4

Title

Created Time

Length

1/15

01/JAN/2005 12:00

00:01:43 SP

00:13:27

Title List

Length Edit

DVD-RAM(VR)

No. Title

Length ENdoi.t Title

Playing Time

01 19/APR/2005 1 00:00:21 01

02 19/APR/2005 1 00:00:03 02

03 20/APR/2005 2 00:00:15 03

04 20/APR/2005 2 00:00:16 04

05 21/APR/2005 1 00:06:32 05

√

00:00:21

00:00:03

√

Title Protection

01 JAN 2005 SAT

Not Protected

√

12:00

√

Sports

00:00:15

Play

√

Movie

Rename

00:00:16

19/APR/2005 12:00 PR12

Delete

00:06:32

Edit

00:08:16

√

19/APR/2005

12:00

02/01/01

06 21/APR/2005 1 00:08:16 06

√

SP 00:25:30(PM)

Protection

00:09:36

07 22/APR/2005 1 00:09:36 07

√

MOVE

MOVE RETURN

EXIT RETURN

EXIT

To stop title play, press the STOP button.

To return the title list screen, press the TITLE LIST

button.

1. Playback screen for recorded entries.

2. Information window for the selected entry:

Title name, recording date, recording time, lock

status, recording mode

You can also play a recorded programme

3. Recorded entry No.

by pressing the ANYKEY button during

NOTE

4. Recorded entry title

playback.

5. Recording length (i.e., the playing time)

6. Title list edit items

Play: Plays the selected entry.

DVD-RAM(VR)

Title

1/14

Time

00:01:45

Subtitle

ENG

Rename: Renames the title of a selected entry.

Delete: Deletes the selected entry from the list.

Edit: Deletes a section of titles.

Protection: Locks or unlocks the selected entry.

7. Button display.

Angle

ENG

Off

5.1CH

Repeat

Zoom

Off

MOVE

CHANGE

Press the …† buttons to select Title.

This may depend on the the disc type.

Press the œ √ buttons to select to play

the title list, then press the OK button.

NOTE

DVD-R/DVD-RW(Video) has limited

editing function.

68- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing

This section introduces basic functions of DVD

editing and explains both edit functions for the

recording on a disc and edit functions for the entire

disc.

Title List

A title is a section of recorded video and audio.

Title List shows a list to help you select a title.

Since the title list consists of the information on

stream that is actually recorded, if one title is deleted,

that title cannot be played again.

Play List

This refers to a DVD recorder of playback, which is

made by selecting a desired scene in the entire Title

List. When one playlist is played, only the scene

selected by the user will play and then stop. Since

only the information necessary for playing a desired

scene is included in a playlist, even if that playlist is

deleted, the original stream will not be deleted.

Recording or editing might not be completed if

an error, such as a sudden power failure

occurs.

Please be aware that a material that has been

damaged is unable to be retrieved to its

original content.

Basic Editing (Title List) .....................................70

Advanced Editing (Playlist) ................................74

Disc Manager.....................................................82

English -69

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† œ √ buttons to select the

desired characters, then press the OK

button.

Basic Editing (Title List)

Rename

DVD-RAM(VR)

Sports(A1)

Renaming(Labeling) a Title

Follow these instructions to rename a title list entry, i.e.,

to edit the title of a recorded programme.

MOVE

RETURN

EXIT

Back Space: Deletes and moves the cursor

backwards by one position.

(Equivalent to the CANCEL button)

Space: Enters a blank and moves the cursor one

forward (to the right).

Using the TITLE LIST button

Delete: Deletes the character at the cursor position.

Clear: Deletes all the character inputs.

Save: Registers the character inputs.

Press the TITLE LIST button.

The Title List screen is displayed

Using the MENU button

Press the MENU button.

Press the …† œ √ buttons to select Save,

then press the OK button.

The changed title name is displayed on the title item

of the selected entry.

Press the …† buttons to select Disc Navigation,

then press the OK or √ button twice.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 19/APR/2005 1 00:00:21

02 19/APR/2005 1 00:00:03

03 20/APR/2005 2 00:00:15

04 20/APR/2005 2 00:00:16

05 21/APR/2005 1 00:06:32

06 21/APR/2005 1 00:08:16

√

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 19/APR/2005 1 00:00:21

02 19/APR/2005 1 00:00:03

03 20/APR/2005 2 00:00:15

04 20/APR/2005 2 00:00:16

√

19/APR/2005 12:00 PR12

19/APR/2005

12:00

Sports (A1)

19/APR/2005

12:00

05 Sports(A1)

00:06:32

MOVE

RETURN

EXIT

06 21/APR/2005 1 00:08:16

MOVE

RETURN

EXIT

Press the …† buttons to select an entry

you want to rename from the Title List,

then press the OK or √ button.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 19/APR/2005 1 00:00:21

02 19/APR/2005 1 00:00:03

√

03 20/APR/2005 2 00:00:15

Play

04 20/APR/2005 2

21/APR/2005 12:00 PR12

Delete

05 21/APR/2005 1 00:06:32

21/APR/2005

12:00

Edit

06 21/APR/2005 1 00:08:16

Protection

MOVE

RETURN

EXIT

Press the …† buttons to select Rename,

then press the OK button.

The Rename screen is displayed.

Rename

DVD-RAM(VR)

21/APR/2005 12:00 PR12

MOVE

RETURN

EXIT

70- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the œ √ buttons to select On, then

press the OK button. The key icon on the

information window for the selected entry

changes to the locked status. ( ➝ )

Locking(Protecting) a Title

Follow these instructions to lock an entry to protect it

from accidental deletion.

Title List

DVD-RAM(VR)

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Using the TITLE LIST button

Sports(A1)

19/APR/2005

12:00

Press the TITLE LIST button.

The Title List screen is displayed

MOVE

RETURN

EXIT

Using the MENU button

Press the MENU button.

Press the …† buttons to select Disc Navigation,

then press the OK or √ button twice.

Title List

Length Edit

DVD-RAM(VR)

Deleting a Title

Follow these instructions to delete an entry from the

Title List.

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Drama

19/APR/2005

12:00

MOVE

RETURN

EXIT

Using the TITLE LIST button

Press the …† buttons to select an entry

you want to protect in the Title List, then

press the OK or √ button.

Press the TITLE LIST button.

The Title List screen is displayed

Title List

Length Edit

DVD-RAM(VR)

Using the MENU button

No. Title

Press the MENU button.

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

Press the …† buttons to select Disc Navigation,

then press the OK or √ button twice.

00:00:15

Play

19/APR/2005 12:00 PR12

Delete

00:06:32

19/APR/2005

12:00

Edit

00:08:16

Title List

DVD-RAM(VR)

Protection

No. Title

Length Edit

MOVE

RETURN

EXIT

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Drama

19/APR//2005

12:00

Press the …† buttons to select Protection,

then press the OK or √ button.

MOVE

RETURN

EXIT

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

Press the …† buttons to select an entry

you want to delete in the Title List, then

press the OK or √ button.

00:00:15

Play

Sports(A1)

19/APR/2005

12:00

Delete

00:06:32

Edit

00:08:16

Protection

Title List

DVD-RAM(VR)

MOVE

RETURN

EXIT

No. Title

Length Edit

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

00:00:15

Play

Title List

DVD-RAM(VR)

Sports(A1)

19/APR/2005

12:00

Delete

00:06:32

Edit

00:08:16

Protection

Title Protection:

MOVE

RETURN

EXIT

Off

Sports(A1)

19/APR/2005

12:00

MOVE

RETURN

EXIT

English -71

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Delete,

Deleting a Section of a Title

Follow these instructions to delete a section of a Title

List entry.

then press the OK or √ button.

Title List

Length Edit

DVD-RAM(VR)

(VR mode)

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

00:00:15

Play

Using the TITLE LIST button

Sports(A1)

19/APR/2005

12:00

Delete

00:06:32

Edit

00:08:16

Protection

Press the TITLE LIST button.

MOVE

RETURN

EXIT

The Title List screen is displayed

Using the MENU button

You will be prompted with a confirmation

message.

Press the MENU button.

Press the …† buttons to select Disc Navigation,

then press the OK or √ button twice.

DVD-RAM(VR), DVD-RW(VR mode):

Since Playlist is present, the message ‘Do you

want to delete?(Related Playlists may be deleted.)’

is displayed.

Title List

Length Edit

DVD-RAM(VR)

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

00:00:15

00:00:16

00:06:32

00:08:16

√

Title List

DVD-RAM(VR)

Do you want to delete?

(Related playlists

may be deleted.)

Drama

19/APR/2005

12:00

Sports(A1)

19/APR/2005

12:00

Yes

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

Press the …† buttons to select an entry

you want to edit from the Title List, then

press the OK or √ button.

DVD-RW(Video mode), DVD-R: Since Playlist is

not present, the message ‘Do you want to delete?’

is displayed.

Title List

Length Edit

DVD-RAM(VR)

The message may depend on the type of disc.

No. Title

01 Drama

02 Music

03 Sports

04 Movie

05 Sports(A1)

06 Edu 1

00:00:21

00:00:03

√

00:00:15

Play

Press the œ √ buttons to select Yes, then

press the OK button.

Sports(A1)

19/APR/2005

12:00

Delete

00:06:32

Edit

00:08:16

Protection

MOVE

RETURN

EXIT

ꢀ

You cannot delete a protected entry.

If you want to delete a protected entry,

select “Off” in the Title Protection menu.

(See page 71)

NOTE

Press the …† buttons to select Edit, then

press the OK or √ button.

The Edit Title List screen is display

ꢀ

When the Disc Protection has been set to

Protected, you cannot delete titles.

(See page 83)

Edit Title List

DVD-RAM(VR)

Title List No. 05

Start

ꢀ

Once an entry is deleted from the Title

List it cannot be recovered.

End

Start

End

00:00:00

ꢀ

Once DVD-R, DVD-RW is finalised, it

cannot be deleted.

00:00:00

Delete

Return

Sports(A1)

21/APR/2005 11:50

00:00:00

ꢀ

With DVD-R, titles are only deleted from

MOVE

RETURN

EXIT

the menu however, the Title remains

physically on the disc.

72- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button at the starting point.

The image and starting point time are displayed in the

section deletion starting point window.

Press the OK button to select the Delete.

Edit Title List

DVD-RAM(VR)

Title List No. 05

Start

End

Edit Title List

DVD-RAM(VR)

Start

End

00:00:06

00:10:15

Title List No. 05

00:10:15

Delete

Return

Start

End

Sports(A1)

21/APR/2005 11:50

Start

End

00:00:06

00:00:00

00:00:06

MOVE

RETURN

EXIT

Delete

Return

Sports(A1)

21/APR/2005 11:50

MOVE

RETURN

EXIT

Edit Title List

DVD-RAM(VR)

Title List No. 05

Start

End

Do you want to delete?

Start

00:00:06

(Deleted part will not be restored.)

Edit Title List Screen Elements

00:10:15

Delete

Return

Yes

Sports(A1)

21/APR/2005 11:50

End

00:10:10

MOVE

RETURN

EXIT

Edit Title List

DVD-RAM(VR)

Title List No. 05

00:00:06

Start

End

Start

End

Press œ √ buttons to select Yes, then press

the OK button.

The selected section has been deleted.

To return to the Title List screen, press the …†

buttons to select Return.

00:00:06

Delete

Return

Sports(A1)

21/APR/2005 11:50

00:00:00

MOVE

RETURN

EXIT

1. Playback bar

2. Playtime

ꢀ

The length of the section to be deleted

3. Section deletion starting point window and time

4. Section deletion end point window and time

must be at least 5 seconds long.

NOTE

ꢀ

If the length of the section to be deleted is

Select the start and end points of the section you

want to delete using the playback related buttons.

less than 5 seconds, you will be prompted

with the message 'The range is too

short.'.

Playback related buttons: (

ꢀ

If the end time precedes the starting

point, you will be prompted with the

message ‘End point cannot be marked

earlier than start point’.

Press the OK button at the end point.

The image and end point time are displayed in the

Section deletion ending point window.

ꢀ

The section cannot be deleted when it

includes a still picture.

Edit Title List

DVD-RAM(VR)

Title List No. 05

ꢀ

Press the MENU button after the

Start

End

operation has finished. The Edit Title List

screen will disappear.

Start

End

00:00:06

00:10:15

Delete

Return

Sports(A1)

21/APR/2005 11:50

MOVE

RETURN

EXIT

English -73

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button at the end point.

Advanced Editing

(Playlist)

Make Scene

DVD-RAM(VR)

Scene No. 001

Start

End

Start

End

00:00:10

00:10:00

Title List: 1/6

00:10:00

Make

Return

Creating a Playlist

New Playlist

19/APR/04 12:00

Follow these instructions to create a new playlist entry

from a recorded title.

MOVE

RETURN

EXIT

The image and end point time are displayed in the

End window.

The yellow-coloured selection bar moves to the

Make item.

(VR mode)

With the unit in Stop mode, press the

MENU button.

- To make a new playlist -

Press the …† buttons to select Playlist, then

press the OK or √ button.

Press the OK button to select the Make.

A new Scene will be added to the current Playlist.

A new Make Scene screen is displayed.

Playlist

DVD-RAM(VR)

Disc Navigation New Playlist

√

Edit Playlist

Playlist

ꢀ

You can check and see all the scenes on

Edit Playlist screen.

Disc manager

Programme

Setup

NOTE

ꢀ

Repeat steps 1~6 if you want to make a

new playlist.

MOVE

RETURN

EXIT

ꢀ

Repeat steps 4~6 if you want to make

scenes of the playlist.

Press the …† buttons to select New

Playlist, then press the OK or √ button.

The Make Scene screen is displayed.

- To return to Edit Playlist menu -

Press the …† buttons to select Return,

Make Scene

DVD-RAM(VR)

then press the OK button.

Scene No. 001

The Edit Playlist screen is displayed.

Start

End

Start

End

00:00:00

Title List: 1/6

Edit Playlist

DVD-RAM(VR)

00:00:10

Make

Return

No. Title

Length Edit

New Playlist

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

03 24/APR/2005/1 00:00:15

04 24/APR/2005/1 00:00:16

05 25/APR/2005/2 00:06:32

√

19/APR/04 12:00

MOVE

RETURN

EXIT

25/APR/2005 06:03

7 Scenes

24/APR/2005 10:43

Press the OK button at the start point.

MOVE

RETURN

EXIT

Make Scene

DVD-RAM(VR)

Scene No. 001

Press the MENU or PLAY LIST button after

the operation has finished.

The Edit Playlist screen will disappear.

Start

End

Start

End

00:00:10

00:00:00

Title List: 1/6

00:00:10

Make

Return

New Playlist

19/APR/04 12:00

ꢀ

MOVE

RETURN

EXIT

You can create up to 99 playlist entries.

NOTE

ꢀ

Depending on the kind of disc, the

The image and time at the start point are

displayed on the Start window.

The yellow-coloured selection bar moves to the

End item.

displayed screen may have a slight

difference.

Select the starting point of the section from

which you want to create a new scene using the

playback related buttons (

74- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Play, then

select the OK button.

The playlist entries will be played.

Playing Entries in the Playlist

Follow these instructions to play the playlist entries.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

(VR mode)

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

√

03 24/APR/2005/1 00:00:15

Play

With the unit in Stop mode, press the

PLAY LIST button.

The Edit Playlist screen is displayed.

04 24/APR/2005/1

Rename

00:00:16

24/APR/2005 10:43

Edit Scene

05 25/APR/2005/2 00:06:32

7 Scenes

Copy

24/APR/2005 10:43

Delete

MOVE

RETURN

EXIT

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

√ Play

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

03 24/APR/2005/1 00:00:15

04 24/APR/2005/1 00:00:16

05 25/APR/2005/2 00:06:32

√

24/APR/2005 10:43

7 Scenes

24/APR/2005 10:43

MOVE

RETURN

EXIT

Using the MENU button

To view the current status of the disc and progress

of playback : Press the INFO button, and the

information about the disc will appear.

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Playlist, then

press the OK or √ button.

Press the …† buttons to select Edit Playlist,

then press the OK or √ button.

DVD-RAM(VR)

Disc Name

Disc Info

Total Title

Total Playlist

Recordable Time 02:12 SP

Protection

Screen

Not Protected

Playback [Playlist]

Playlist

DVD-RAM(VR)

Disc Navigation

Playlist

New Playlist

Edit Playlist

√

01 JAN 2005 SAT

13:00

Disc manager

Programme

Setup

Press the INFO button once again. Then you can

check the information about the playlist currently

playing back.

MOVE

RETURN

EXIT

DVD-RAM(VR)

Name

Playing Info

01/JAN/2005 12:00

Playlist

Created Time

Length

Playing Time

Total Scene

1/15

Press the …† buttons to select the title you

want to edit from the Playlist, then press the

OK or √ button.

The Edit Playlist menu is displayed : Play, Rename,

Edit Screen, Copy, Delete.

01/JAN/2005 12:00

00:01:43

00:13:27

01 JAN 2005 SAT

13:00

The screen returns to the Edit Playlist screen when

the playback has finished.

Press the STOP button to stop playing.

The screen returns to the Edit Playlist screen.

English -75

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter the desired characters using the …†

Renaming a Playlist Entry

Follow these instructions to rename a playlist entry, i.e.

to edit the title of a playlist entry.

œ √ buttons.

Rename

DVD-RAM(VR)

Dolphin

(VR mode)

With the unit in Stop mode, press the

PLAY LIST button.

The Edit Playlist screen is displayed.

MOVE

RETURN

EXIT

Edit Playlist

DVD-RAM(VR)

This function is the same as the Rename

function in renaming the title list. (See page 70.)

The maximum number of characters that can be

entered is 31. All 31 characters can be

No. Title

Length Edit

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

03 24/APR/2005/1 00:00:15

04 24/APR/2005/1 00:00:16

05 25/APR/2005/2 00:06:32

√

displayed by pressing the INFO. button twice.

24/APR/2005 10:43

7 Scenes

24/APR/2005 10:43

MOVE

RETURN

EXIT

Press the …† œ √ buttons to select Save,

then press the OK button.

The changed title is displayed in the title field of the

selected playlist entry.

Using the MENU button

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Playlist, then

press the OK or √ button.

Press the …† buttons to select Edit Playlist,

then press the OK or √ button.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

√

03 Dolphin

00:00:15

04 24/APR/2005/1 00:00:16

05 25/APR/2005/2 00:06:32

Dolphin

7 Scenes

24/APR/2005 10:43

Press the …† buttons to select the title you

want to edit from the Playlist, then press the

OK or √ button.

The Edit Playlist menu is displayed :Play, Rename,

Edit Scene, Copy, Delete

MOVE OK

RETURN

EXIT

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

√

03 24/APR/2005/1 00:00:15

Play

04 24/APR/2005/1

Rename

00:00:16

24/APR/2005 10:43

Edit Scene

05 25/APR/2005/2 00:06:32

7 Scenes

Copy

24/APR/2005 10:43

Delete

MOVE

RETURN

EXIT

Press the …† buttons to select Rename, then

press the OK button.

The Rename screen is displayed.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 23/APR/2005/0 00:00:21

02 23/APR/2005/0 00:00:03

√

03 24/APR/2005/1 00:00:15

Play

04 24/APR/2005/1

Rename

00:00:16

24/APR/2005 10:43

Edit Scene

05 25/APR/2005/2 00:06:32

7 Scenes

Copy

24/APR/2005 10:43

Delete

MOVE

RETURN

EXIT

76- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing a Scene for the Playlist

Follow these instructions to edit scenes for a playlist.

Playing a Selected Scene

Press the …† œ √ buttons to select the

scene you want to play, then press the OK

button.

(VR mode)

The playlist entry to be played is selected.

With the unit in Stop mode, press the

PLAY LIST button.

The Edit Playlist screen is displayed.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

2/7

Edit Playlist

DVD-RAM(VR)

Play

Modify

Move

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

00:00:26

00:00:07

00:00:11

00:00:04

03 Dolphin

04 Natural

Add

Science

00:00:03

00:00:04

Delete

7 Scenes

MOVE

RETURN

EXIT

24/APR/2005 10:43

MOVE OK

RETURN

EXIT

Using the MENU button

Press the OK button.

With the unit in Stop mode, press the MENU

button.

The selected scene is played.

Press the …† buttons to select Playlist, then

press the OK or √ button.

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

2/7

Press the …† buttons to select Edit Playlist,

then press the OK or √ button.

Play

Modify

Move

00:00:26

00:00:07

00:00:11

00:00:04

Add

Press the …† buttons to select the title you

want to edit from the Playlist, then press the

OK or √ button.

The Edit Playlist menu is displayed.:Play, Rename,

Edit Scene, Copy, Delete

00:00:03

00:00:04

Delete

MOVE

RETURN

EXIT

√ Play

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 Science

02 Sky

00:00:17

00:00:06

√

03 Dolphin

04 Natural

00:00:06

Play

:37

Dolphin

Edit Scene

Copy

7 Scenes

24/APR/2005 10:43

Delete

MOVE OK

RETURN

EXIT

To stop scene play, press the STOP button.

Press the …† buttons to select Edit

Scene, then press the OK button.

The Edit Scene screen is displayed.

Edit Playlist

DVD-RAM(VR)

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

√

03 Dolphin

04 Natural

00:00:06

Play

:37

Dolphin

Edit Scene

Copy

7 Scenes

24/APR/2005 10:43

Delete

MOVE

RETURN

EXIT

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

1/7

Play

Modify

Move

00:00:26

00:00:07

00:00:04

Add

00:00:03

00:00:11

00:00:04

Delete

MOVE

RETURN

EXIT

English -77

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button at the end point of the

Modifying a Scene (Replacing a Scene)

scene.

To setup, follow steps 1 to 3 in page 77.

Modify Scene

DVD-RAM(VR)

Scene No. 002

Start

End

Press the …† œ √ buttons to select the

Start

End

00:00:25

00:00:30

scene you want to modify, then press the

00:00:30

Change

Cancel

Natural

23/APR/2005 03:34:00

OK button.

MOVE

RETURN

EXIT

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

2/7

Play

Modify

Move

The image and ending point time are displayed in

the End window.

00:00:26

00:00:07

00:00:11

00:00:04

Add

00:00:03

00:00:04

Delete

Press the …† buttons to select Change, then

press the OK button.

MOVE

RETURN

EXIT

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

2/7

Play

Modify

Move

Press the …† buttons to select Modify,

then press the OK button.

The Modify Scene screen is displayed.

00:00:26

00:00:03

00:00:07

00:00:11

00:00:04

Add

Delete

Modify Scene

DVD-RAM(VR)

MOVE

RETURN

EXIT

Scene No. 002

Start

End

The scene you want to modify is changed with the

selected section.

Start

End

00:00:00

Change

Cancel

Natural

23/APR/2005 03:34:00

MOVE

RETURN

EXIT

Press the OK button at the start point of the

scene.

Modify Scene

DVD-RAM(VR)

Scene No. 002

Start

End

Start

End

00:00:25

00:00:00

00:00:25

Change

Cancel

Natural

23/APR/2005 03:34:00

MOVE

RETURN

EXIT

The image and starting point time are displayed

on the Start window.

Select the starting or ending point of the section

you want to modify using the playback related

buttons (

78- English

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

You cannot move the selected scene to the

position of the next scene, because the

selected scene should be inserted before

that position, which requires no action.

Moving a Scene (Changing the Position of a Scene)

NOTE

To setup, follow steps 1 to 3 in page 77.

ꢀ

Depending on the kind of disc, the displayed

screen may have a slight difference.

Press the …† œ √ buttons to select the

scene you want to move (change the

position), then press the OK button.

Adding a Scene

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

3/7

Play

Modify

Move

To setup, follow steps 1 to 3 in page 77.

00:00:26

00:00:07

00:00:11

00:00:04

Press the …† œ √ buttons to select the

Add

scene that will have a new scene inserted

before it, then press the OK button.

A yellow selection window is displayed on the scene

to be added as the new scene.

00:00:03

00:00:04

Delete

MOVE

RETURN

EXIT

Press the …† buttons to select Move, then

DVD-RAM(VR)

Scene No.

Edit Scene

Playlist No.

4/7

press the OK button.

Play

Modify

Move

00:00:26

00:00:07

00:00:11

00:00:04

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

3/7

Add

Play

Modify

Move

00:00:00

00:00:04

Delete

MOVE

RETURN

EXIT

00:00:26

00:00:07

00:00:11

00:00:04

Add

00:00:03

00:00:04

Delete

MOVE

RETURN

EXIT

Press the …† buttons to select Add, then

press the OK button.

A yellow selection window is displayed on the

scene to be moved.

Add Scene

DVD-RAM(VR)

Scene No. 004

Start

End

Press the …† œ √ buttons to select the

position to which you want to move the

selected scene, then select the OK button.

Start

End

00:00:00

00:00:15

Add

Sclence

APR/23/2005 06:43 AM

Cancel

MOVE

RETURN

EXIT

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

6/7

Play

Modify

Move

00:00:26

00:00:07

00:00:11

00:00:04

Press the OK button at the starting point of

the scene.

Add

00:00:03

00:00:04

Delete

Add Scene

MOVE

RETURN

EXIT

DVD-RAM(VR)

Scene No. 004

Start

End

The selected scene is moved to the selected

position.

Start

End

00:00:15

00:00:00

00:00:15

Add

Sclence

APR/23/2005 06:43 AM

Cancel

MOVE

RETURN

EXIT

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

5/7

Play

Modify

Move

The image and starting point time are displayed in

the Start window.

Select the end point of the section where you want

to add the new scene using the playback related

00:00:26

00:00:07

00:00:11

00:00:04

Add

00:00:03

00:00:04

Delete

MOVE

RETURN

EXIT

buttons (

English -79

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button at the end point of the

Copying a Playlist Entry to the

Playlist

scene.

Add Scene

DVD-RAM(VR)

Scene No. 004

Start

End

Using the PLAY LIST button

Start

End

00:00:15

00:00:35

Add

Sclence

APR/23/2005 06:43 AM

Cancel

With the unit in Stop mode, press the

MOVE

RETURN

EXIT

PLAY LIST button.

The Edit Playlist screen is displayed.

The image and time of the end point are displayed

in the End window.

To cancel, press the …† buttons to select cancel,

then press the OK button.

Edit Playlist

DVD-RAM(VR)

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

03 Dolphin

04 Natural

Science

7 Scene

Press the …† buttons to select Add, then

press the OK button.

APR/23/2005 06:43 AM

MOVE OK

RETURN

EXIT

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

Using the MENU button

4/8

Play

Modify

Move

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Playlist, then press

the OK or √ button.

Press the …† buttons to select Edit Playlist, then

press the OK or √ button.

00:00:26

00:00:07

00:00:11

00:00:04

Add

00:00:15

Delete

MOVE

RETURN

EXIT

The section you want to add is inserted prior to the

scene selected in step 4.

Press the …† buttons to select the title you

want to copy to the Playlist, then press the

OK or √ button.

The Edit Playlist menu is displayed.:Play, Rename,

Edit Scene, Copy, Delete

Deleting a Scene

Edit Playlist

DVD-RAM(VR)

To setup, follow steps 1 to 3 in page 77.

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

√

Press the …† œ √ buttons to select the

03 Dolphin

04 Natural

00:00:06

Play

:37

scene you want to delete, then press the

Dolphin

7 Scene

Edit Scene

Copy

OK button.

APR/23/2005 06:43 AM

Delete

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

MOVE OK

RETURN

EXIT

2/6

Play

Modify

Move

Press the …† buttons to select Copy, then

press the OK button.

Playlist that has been selected will be copied.

00:00:26

00:00:07

00:00:11

00:00:04

Add

00:00:03

00:00:04

Delete

MOVE

RETURN

EXIT

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 Science

02 Sky

00:00:17

00:00:06

√

03 Dolphin

04 Natural

00:00:06

Play

Press the …† buttons to select Delete,

then press the OK button.

:37

Dolphin

7 Scene

Edit Scene

Copy

APR/23/2005 06:43 AM

Delete

Edit Scene

Playlist No.

DVD-RAM(VR)

Scene No.

MOVE

RETURN

EXIT

2/6

Play

Modify

Move

Edit Playlist

Length Edit

DVD-RAM(VR)

00:00:26

00:00:07

00:00:0101

00:00:04

No. Title

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

00:00:06

√

Add

00:00:00

045

00:00:00

Delete

03 Dolphin

04 Natural

05 Dolphin

MOVE

RETURN

EXIT

Dolphin

7 Scene

APR/23/2005 06:43 AM

MOVE OK

RETURN

EXIT

80- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the …† buttons to select Delete,

ꢀ

You can create up to 999 scenes on one

disc. In some cases, this may be different

from the actual numbers.

then press the OK button.

NOTE

Press the MENU button after the

operation has finished. The Edit Playlist

screen will disappear.

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 Science

02 Sky

00:00:17

00:00:06

√

03 Dolphin

04 Natural

05 Dolphin

00:00:06

Play

:37

Dolphin

7 Scene

Edit Scene

00:00:06

Copy

APR/23/2005 06:43 AM

Delete

MOVE OK

RETURN

EXIT

Deleting a Playlist Entry from

the Playlist

You will be prompted with the delete confirmation

message 'Do you want to delete?'.

Using the PLAYLIST button

Edit Playlist

DVD-RAM(VR)

Do you want to delete?

With the unit in Stop mode, press the

PLAY LIST button.

Yes

Dolphin

7 Scene

The Edit Playlist screen is displayed.

APR/23/2005 06:43 AM

Edit Playlist

MOVE OK

RETURN

EXIT

DVD-RAM(VR)

No. Title

Length Edit

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

00:00:06

√

03 Dolphin

04 Natural

05 Dolphin

Press the œ √ buttons to select Yes, then

press the OK button.

It automatically returned to the Edit Playlist screen

after the delete operation has finished.

Science

7 Scene

APR/23/2005 06:43 AM

MOVE OK

RETURN

EXIT

Using the MENU button

Edit Playlist

DVD-RAM(VR)

With the unit in Stop mode, press the MENU

button.

Press the …† buttons to select Playlist, then

press the OK or √ button.

Press the …† buttons to select Edit Playlist, then

press the OK or √ button.

Deleting...

(Please wait)

Dolphin

7 Scene

APR/23/2005 06:43 AM

MOVE

RETURN

EXIT

Press the …† buttons to select the title you

want to delete from the Playlist, then press

the OK or √ button.

The Edit Playlist menu is displayed.:Play, Rename,

Edit Scene, Copy, Delete

Edit Playlist

Length Edit

DVD-RAM(VR)

No. Title

01 Science

02 Sky

00:00:17

00:00:06

00:00:37

√

03 Dolphin

04 Natural

Natural

7 Scene

Edit Playlist

Length Edit

DVD-RAM(VR)

APR/23/2005 06:43 AM

No. Title

01 Science

02 Sky

00:00:17

00:00:06

√

MOVE

RETURN

EXIT

03 Dolphin

04 Natural

05 Dolphin

00:00:06

Play

:37

Dolphin

7 Scene

Edit Scene

00:00:06

Copy

APR/23/2005 06:43 AM

Delete

MOVE OK

RETURN

EXIT

English -81

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter the desired characters press the …†

Disc Manager

œ √ buttons.

Rename

DVD-RAM(VR)

Disc

Editing the Disc Name

Follow these instructions to give a name to a disc.

MOVE

RETURN

EXIT

This function is the same as the Rename

function in renaming the title list. (See page 70.)

The maximum number of characters that can be

entered is 31. All 31 characters can be

With the unit in Stop mode, press the

MENU button.

displayed by pressing the INFO button.

Disc Navigation

DVD-RAM(VR)

√

Disc Navigation Title List

DivX

Playlist

Disc manager

Programme

Setup

Press the …† œ √ buttons to select Save,

then press the OK button.

A disc name is given to the disc.

Photo

Music

Disc Manager

DVD-RAM(VR)

Title List

MOVE

RETURN

EXIT

Disc Name

: Disc

: Not Protected

√

Disc Protection

Disc Format

Playlist

Disc manager

Programme

Setup

Delete All Title Lists

Press the …† buttons to select Disc

Manager, then press the OK or √ button.

MOVE

RETURN

EXIT

Disc Manager

DVD-RAM(VR)

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

√

ꢀ

You may need to clear disc protect before

beginning editing.

Disc manager

Programme

Setup

Delete All Title Lists

NOTE

Depending on the kind of disc, the

displayed screen may be different.

MOVE

RETURN

EXIT

Press the …† buttons to select Disc

Name, then press the OK or √ button.

The Edit Name screen is displayed.

Rename

DVD-RAM(VR)

MOVE

RETURN

EXIT

82- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Protection

Disc Protection allows you to protect your discs from

being formatted or deleted due to unintended

operations.

Formatting a Disc

Use these instructions to format a disc.

The Disc Protection should also be cleared.

With the unit in Stop mode, press the

MENU button.

Disc Navigation

DVD-RAM(VR)

√

Disc Navigation

Disc Navigation Title List

DVD-RAM(VR)

DivX

Playlist

Disc manager

Programme

Setup

√

Disc Navigation Title List

Photo

Music

DivX

Playlist

Disc manager

Programme

Setup

Photo

Music

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

Press the …† buttons to select Disc

Manager, then press the OK or √ button.

Press the …† buttons to select Disc

Manager, then press the OK or √ button.

Disc Manager

DVD-RAM(VR)

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

√

Disc Manager

DVD-RAM(VR)

Disc manager

Programme

Setup

Delete All Title Lists

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

√

Disc manager

Programme

Setup

Delete All Title Lists

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

Press the …† buttons to select Disc

Format, then press the OK or √ button.

Press the …† buttons to select Disc

Protection, then press the OK or √ button.

Disc Manager

DVD-RAM(VR)

√

Disc Navigation Disc Name

Disc Manager

DVD-RAM(VR)

Disc Protection

: Not Protected

√

Playlist

Disc manager

Programme

Setup

Disc Format

Disc Name

√

Disc Navigation

Playlist

Delete All Title Lists

Disc Protection

Disc Format

: Not Protected

Not Protected

√

Portected

Disc manager

Programme

Setup

Delete All Title Lists

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

DVD-RAM

You will be prompted with the confirmation

message 'Do you want to format disc?'.

Press the …† button to select Protected,

then Press the OK button.

Disc Manager

DVD-RAM(VR)

Disc Name

√

Disc Manager

Disc Navigation

Playlist

DVD-RAM(VR)

Disc Protection

: Not Protected

√

Disc Name

√

Disc Navigation

Playlist

Do you want to format disc?

Disc Format

Disc Protection

Disc Format

: Portected

√

Disc manager

Programme

Setup

Delete All Title Lists

Yes

Disc manager

Programme

Setup

Delete All Title Lists

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

You will be prompted with the confirmation

message 'All data will be deleted. Do you

want to continue?'.

English -83

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-RW

You will be prompted with the confirmation

Press the …† buttons to select Disc

Manager, then press the OK or √ button.

message ‘Choose the recording format for

DVD- RW.’

Disc Manager

DVD-RAM(VR)

Disc Name

√

Disc Navigation

Playlist

Disc Manager

DVD-RW(VR)

Disc Protection

Disc Format

: Not Protected

√

Disc Name

√

Disc Navigation

Playlist

Disc manager

Programme

Setup

Delete All Title Lists

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Disc manager

Choose the recording format for DVD-RW.

Disc Finalise

Programme

Setup

Delete All Title Lists

DVD-VR DVD-V

MOVE

RETURN

EXIT

MOVE

RETURN

EXIT

Press the …† button to select Delete All

Title Lists, then press the OK or √ button.

Press the œ √ buttons to select Yes, then

press the OK button.

The disc is formatted.

Disc Manager

DVD-RAM(VR)

√

Disc Navigation Disc Name

Disc Protection

: Not Protected

√

Playlist

Disc manager

Programme

Setup

Disc Format

Delete All Title Lists

DVD-VR and DVD-V are defined according to

their recording format.

DVD-VR

DVD-RAM

DVD-RW

DVD-V

DVD-RW

DVD-R

MOVE

RETURN

EXIT

DISC

You will be prompted with the confirmation

message ‘Do you want to delete all title lists?'.

Disc Manager

DVD-RAM(VR)

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

√

Do you want to delete all title lists?

Delete All Title Lists

Disc manager

Programme

Setup

Yes

Delete All Title Lists

MOVE

RETURN

EXIT

When Protected Entry exists: The Delete All Title

List function will not operate. If there is a title

containing a still picture, however, that function will

not operate. If you want to delete a protected entry,

disable Protect for it on the Lock item.

With the unit in Stop mode, press the

MENU button.

Disc Navigation

DVD-RAM(VR)

√

Disc Navigation Title List

DivX

Playlist

Press the œ √ buttons to select Yes, then

press the OK button.

All title lists are deleted.

Photo

Disc manager

Programme

Setup

Music

MOVE

RETURN

EXIT

84- English

Download from Www.Somanuals.com. All Manuals Search And Download.

You will be prompted with the message 'Do you want

to finalise disc?'.

Finalising a disc

After you record titles onto a DVD-RW/DVD-R disc with

your DVD recorder, it needs to be finalised before it can

be played back on external devices.

Disc Manager

DVD-RW(VR)

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Do you want to finalise disc?

Disc Finalise

Disc manager

Programme

Setup

Delete All Title Lists

Yes No

With the unit in Stop mode, press the

MENU button.

MOVE

RETURN

EXIT

Disc Navigation

DVD-RW(VR)

√

Disc Navigation Title List

If you select Yes, you will be prompted again with the

message ' Disc will be finalised. Do you want to

continue?'

DivX

Playlist

Disc manager

Programme

Setup

Photo

Music

Disc Manager

DVD-R(V)

Disc Navigation

Disc manager

Programme

Setup

MOVE

RETURN

EXIT

Disc Name

√

Disc Protection

: Not Protected

√

Disc will be finalised.

Disc Finalise

Do you want to continue?

Delete All Title Lists

Yes

Press the …† buttons to select Disc

Manager, then press the OK or √ button.

MOVE

RETURN

EXIT

Disc Manager

DVD-RW(VR)

Press the œ √ buttons to select Yes, then

press the OK button.

The disc is finalised.

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Disc manager

Programme

Setup

Disc Finalise

Delete All Title Lists

MOVE

RETURN

EXIT

ꢀ

Once a disc is finalised, you cannot

delete entries from the record list.

NOTE

ꢀ

After being finalised, the DVD-R/DVD-

RW(video mode) operates in the same

manner as a DVD-Video.

Press the …† button to select Disc

Finalise, then press the OK or √ button.

ꢀ

Depending on the disc type, the displayed

screen may be different.

Disc Manager

DVD-RW(VR)

ꢀ

Finalising time may be different

depending on the amount of data

recorded on the disc.

Disc Name

√

Disc Navigation

Playlist

Disc Protection

Disc Format

: Not Protected

: DVD-VR

√

Disc manager

Programme

Setup

Disc Finalise

ꢀ

Data on the disc will be damaged if the

recorder is powered off during finalise

process.

Delete All Title Lists

MOVE

RETURN

EXIT

Disc Manager

DVD-R(V)

Disc Navigation Disc Name

√

Disc Protection

: Not Protected

√

Disc manager

Programme

Setup

Disc Finalise

Delete All Title Lists

MOVE

RETURN

EXIT

English -85

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the œ √ buttons to select Yes, then

press the OK button.

The disc is unfinalised.

Unfinalising a disc (V/VR mode)

With the unit in Stop mode, press the

ꢀ

A DVD-RW can be finalised or unfinalised

in Video mode.

MENU button.

NOTE

Disc Navigation

DVD-RW(VR:F)

Finalise

Unfinalise

DVD-RW(V)

√

Disc Navigation Title List

DivX

Mark

DVD-Video(RW)

Playlist

Disc manager

Programme

Setup

Photo

Music

Additional recording, protection

and deletion are possible.

Operation Same as DVD-Video

ꢀ

A DVD-RW can be finalised or unfinalised

in VR mode.

MOVE

RETURN

EXIT

Finalise

Unfinalise

Press the …† buttons to select Disc

Manager, then press the OK or √ button.

Mark

DVD-RW(VR:F)

DVD-RW(VR)

Disc Manager

DVD-RW(VR:F)

Additional recording,

deletion, editing, and

Additional recording,

deletion, editing, and

protection are possible.

Disc Name

√

Disc Navigation

Playlist

Operation

Disc Format

: DVD-VR

√

protection are impossible.

Disc Unfinalise

Disc manager

Programme

Setup

MOVE

RETURN

EXIT

Press the …† button to select Disc

Unfinalise, then press the OK or √ button.

You will be prompted with the message 'Do you want

to unfinalise disc?'.

Disc Manager

DVD-RW(VR:F)

Disc Navigation Disc Name

√

Disc Format

Playlist

: DVD-VR

√

Disc Unfinalise

Do you want to unfinalise disc?

Disc manager

Programme

Setup

Yes

MOVE

RETURN

EXIT

If you select Yes, you will be prompted again with the

message ' Disc will be unfinalised. Do you want to

continue?'

Disc Manager

DVD-RW(VR:F)

Disc Name

Disc Format

Disc will be unfinalised.

√

Disc Navigation

Playlist

: DVD-VR

√

Disc Unfinalise

Do you want to continue?

Disc manager

Programme

Setup

Yes

MOVE

RETURN

EXIT

86- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Additional

If your product malfunctions, go through the check-

points below before contacting a Samsung authorised

service centre.

Information

Power

The input is displayed for a while when the

power is turned on.

The DVD recorder requires some time

Checkpoint 1

to initialize and the input will be

displayed for approx. 10 seconds after

it is turned on.

Recording

Cannot record TV programmes.

Check whether the power cord is

Checkpoint 1

securely plugged into the power outlet.

Checkpoint 2

Did you set the DVD recorder channel

settings correctly?

Checkpoint 3

Check the free space on your

DVD-RAM/DVD-RW/DVD-R discs.

I pressed the REC button but there is no response.

Recording is possible for DVD-

Checkpoint 1

RAM/DVD-RW/DVD-R discs only.

If a programme is copy protected, it

cannot be recorded.

Troubleshooting ................................................87

Specifications....................................................91

English -87

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

The angle operation does not work while playing a

DVD disc.

Cannot play the disc.

The angle operation is available only

Checkpoint 1

when the disc contains images

captured from different angles.

Check whether the disc is inserted

correctly with the label facing up.

Checkpoint 1

Checkpoint 2

Check the regional code of the DVD

disc.

Checkpoint 3

This DVD recorder cannot play some

types of discs. (See page 51)

The selected audio and/or subtitle language is not

played.

icon appears on the screen.

Audio and subtitle languages are

Checkpoint 1

disc-specific. Only the sound and

subtitle languages contained on the

DVD disc are available and displayed in

the disc menu.

You cannot use this operation or

function due to one of the following

reasons:

Checkpoint 1

(1) Your DVD disc restricts it.

(2) Your DVD disc does not support this

feature (for example: angles)

(3) The feature is not available at the

moment.

Video

(4) You've requested a title, chapter, or

scan time that is out of range.

The disc revolves, but no image or bad quality

images are displayed.

Be sure that the Video Setting is

properly set. (See pages 33~ 36).

Checkpoint 1

Play mode settings are different from the settings

configured in the Settings menu.

Checkpoint 2

Check whether there is damage to or

any foreign material on your disc.

Checkpoint 3

Some low quality discs may not play

properly.

The disc does not support all selected

Checkpoint 1

functions. In this case, some settings

configured in the settings menu may

not work properly.

Checkpoint 4

If scenes change from dark to bright

suddenly, the screen may shake

vertically temporarily, but this is not a

fault.

Cannot change the aspect ratio.

The aspect ratio is fixed for DVD discs.

Checkpoint 1

(See pages 35~36.)

88- English

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound

Timer recording does not work properly.

No sound.

Re-check the recording time and the

end time settings again.

Checkpoint 1

Checkpoint 2

Recording will be cancelled if the power

is interrupted due to a power failure or

another similar reason while recording.

Are you watching a programme in slow

or skip mode?

Checkpoint 1

If you are playing a programme at a

speed other than normal speed, sound

will not be heard.

Checkpoint 2

Checkpoint 3

Check the connections and settings.

HDMI

Check whether the disc is damaged.

Clean the disc, if necessary.

No HDMI output.

Checkpoint 4

Check whether the disc is inserted

correctly with the label facing up.

Check the Video output is HDMI

enabled.

Checkpoint 1

Checkpoint 2

No audio output.

Check the connection between the TV

and the HDMI jack of the DVD

Recorder.

Check whether you have selected the

Checkpoint 1

See if your TV supports this

576p/720p/1080i DVD Recorder.

Checkpoint 3

correct digital output options in the

Audio Output Options menu.

(See pages 32~33)

Abnormal HDMI output screen.

Timer Recording

If snow noise appears on the screen, it

Checkpoint 1

means that TV does not support HDCP

(High-bandwidth Digital Content

Protection).

Timer lamp flickers.

Check there is enough space in the

disc for recording.

Checkpoint 1

Checkpoint 2

Check whether the current disc is

recordable or not.

Make sure to check before the start

time of recording.

English -89

Download from Www.Somanuals.com. All Manuals Search And Download.

Other

HDMI output Jitter

I forget my password for parental supervision.

Check your TV system setup correctly.

Checkpoint 1

Checkpoint 2

Screen Jitter may occur when the

frame rate is converted from 50Hz to

60Hz for 720p/1080i HDMI (High

Definition Multimedia Interface) Output.

Checkpoint 1

Press the

button on the front panel of

the Recorder for more than 5 seconds with

no disc in the DVD recorder.

All settings including the password will

revert to the factory settings. Do not use

this unless absolutely

Please refer to the user’s manual of

your TV.

Checkpoint 3

necessary. (Note that this function is

possible only when no disc is inserted.)

Remote Control

Is it possible to change a subtitle and an audio

signal on a recorded disc?

The remote control doesn't work.

A recorded disc is played with only the

Checkpoint 1

subtitle and the audio signal which

were selected during recording.

Point the remote control at the remote

Checkpoint 1

control sensor on your DVD recorder.

Allow for proper distance. Remove

obstacles between your DVD recorder

and the remote control.

Checkpoint 2

Checkpoint 3

Check whether the batteries are empty.