DVD-VCR
SV-DVD640
STANDBY/ON
OP
E
N
/C
L
OS
E
AUX
OK
PAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Overview
STANDBY/ON
OPEN/CLOSE
OK
wnload from Www.Somanuals.com. All Manuals Search And Downlo
Safety Instructions
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
10%
75%
40°C
H
H
5°C
Do NOT expose the DVD-VCR to
direct sunlight.
Do NOT expose the DVD-VCR to
any liquids.
Do NOT expose the DVD-VCR to
extreme temperature conditions
(below 5°C and above 40°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
Do NOT place any objects on the
DVD-VCR or remote control.
During a storm and/or lightning,
unplug the DVD-VCR from the
mains socket and aerial.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners.
Use of this copyright protection technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-3
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos :
Disc Types (Logos) Recording Types Disc Size
DVD
Max. Playing Time
Characteristics
•
•
DVD contains excellent sound and video
due to Dolby Digital and MPEG-2 system.
Single-sided 240 min.
Double-sided 480 min.
12 Cm
Audio
+
Various screen and audio functions can
be easily selected through the on-screen
menu.
Single-sided 80 min.
Double-sided 160 min.
Video
8 Cm
•
An LP is recorded as an analog signal
with more distortion. CD is recorded as a
Digital Signal with better audio quality,
less distortion and less deterioration of
audio quality over time.
AUDIO-CD
VIDEO-CD
12 Cm
8 Cm
74 min.
20 min.
Audio
•
Video with CD sound, VHS quality &
MPEG-1 compression technology.
74 min.
20 min.
Audio
+
Video
12 Cm
8 Cm
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
* It may not be to play CD-R,CD-RW and DVD-R in all cases due to the type of disc or condition of the recording.
Disc Markings
Play Region Number
Both the DVD player and the discs are coded by
region. These regional codes must match in order for
the disc to play. If the codes do not match, the disc
will not play.
The Region Number for this player is described
on the rear panel of the player.
~
• Play Region Number
• PAL colour system in Australia, Newzealand, etc.
PAL
NTSC
• NTSC broadcast system in U.S.A, Canada,
Korea, Japan, etc.
• Dolby Digital disc
• Stereo disc
STEREO
DIGITAL
SOUND
• Digital Audio disc
• DTS disc
• Disc contains a Divx software product
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-4
Front View of the DVD-VCR
1
2
3
4
AUX
5
6
7
8
9
10 11
12 13 14
15
16
1
2
3
4
5
6
DVD DECK
7
8
STOP BUTTON
13 DVD SELECT BUTTON
OPEN/CLOSE BUTTON
PLAY/STILL BUTTON
14 VCR SELECT BUTTON
VIDEO CASSETE COMPARTMENT
EJECT BUTTON
9
F.F / SKIP NEXT BUTTON
15 AUX VIDEO INPUT JACK
10 RECORD BUTTON
16 AUX AUDIO L, R INPUT JACK
STANDBY/ON BUTTON
REW/SKIP BACK BUTTON
11 EZ VIEW BUTTON
12 PROGRAME SELECTION BUTTON
Rear View of the DVD-VCR
1
2
3
4
LINE OUT
AUDIO
DIGITAL
S-VIDEO OUT
AUDIO OUT
COAXIAL
OPTICAL
5
6
7
8
9
10
1
2
3
AUDIO L, R OUT SOCKETS
AERIAL IN CONNECTOR
5
6
7
VIDEO OUT SOCKET
9
DIGITAL AUDIO OUT SOCKET
(OPTICAL)
OUT TO TV CONNECTOR
10 S-VIDEO OUT JACK
AV2 (DEC./EXT.) SCART
(EURO-21) SOCKET
AV1 (EURO AV) IN/OUT SCART
(EURO-21) SOCKET
4
AUDIO L, R OUT SOCKETS
(DVD ONLY)
8
DIGITAL AUDIO OUT SOCKET
(COAXIAL)
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-5
Connecting DVD-VCR to the TV
using the Coaxial Cable
Display Indicators
1
2
3
4
5
To receive television programmes a signal must be
received from one of the following sources:
◆
◆
◆
◆
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
◆
Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.
6
1
2
3
The DVD Deck is active
A DVD, VCD, CD or SVCD is loaded
The time, counter position, time remaining or
current deck status is displayed
VHS tape is inserted
1
2
3
4
Remove the aerial or network input cable from the
television.
Connect this cable to the 75Ω coaxial socket
4
5
6
marked
on the rear of your DVD-VCR.
The VCR Deck is active
A Timer Recording is programmed or in progress.
TV
Plug the coaxial cable supplied into the
on your DVD-VCR.
socket
Plug the other end of the coaxial cable into the
connector previously used for the aerial on the
television.
Inserting Batteries in the Remote
Control
5
To obtain better quality pictures and sound on your
television, you can also connect your DVD-VCR to
the television via the SCART cable (see next page)
if your television is equipped with this type of
connection.
You must insert or replace the batteries in the remote
control when you:
◆
◆
Purchase the DVD-VCR
Find that the remote control is no longer
working correctly
2
1
2
Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
Insert two AAA, RO3 or equivalent batteries, taking
care to respect the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
TV
3
Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
3
4
1
◆
Do not mix different battery types (manganese
and alkaline for example).
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-6
Connecting DVD-VCR to the TV
using the SCART Cable
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
You can connect your DVD-VCR to the television using
the SCART cable if the appropriate input is available on
the television. You thus:
You can connect your DVD-VCR to a Satellite receiver
or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment
chosen. The following illustrations give a few examples
of the connection possibilities.
◆
◆
Obtain better quality sound and pictures
Simplify the setting up procedure of your
DVD-VCR
1
AV1(EURO AV): By means of 21-pin Scart Cable
◆
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) socket on
the rear of the DVD-VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV1 input
sources.
◆
Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.
2
By means of RF Coaxial Cable
1
2
Connect the coaxial cable as indicated on page 6.
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should
be adjusted away from channel 36, which is used
by the DVD-VCR, e.g. re-adjust to channel 39.
Connect one end of the SCART cable to the AV1
(EURO AV) socket on the rear of the DVD-VCR.
3
Plug the other end into the appropriate connector
on the television.
Aerial
Aerial
Satellite Receiver or other Equipment
Aerial Connector
TV
2
2
TV
3
SCART Cable
RF coaxial cable
1
SCART Cable
RF coaxial cable
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-7
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time. TV stations
will be stored in memory. The process takes a few
minutes. Your DVD-VCR will then be ready for use.
1
2
AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC./EXT.) socket
on the rear of the DVD-VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV2 input
sources.
1
Connect the coaxial cable as indicated on page 6
(Connecting Your DVD-VCR to the TV Using the
Coaxial Cable)
By means of RF Coaxial Cable
2
3
4
Plug the DVD-VCR into the mains.
Result : The Language Set menu is displayed.
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should
be adjusted away from channel 36, which is used
by the DVD-VCR, e.g. re-adjust to channel 39.
Select the required language by pressing the
ꢀ
or
❷
buttons.
Press OK to store the language selected.
Result: A message appears.
5
6
Press OK button.
Aerial
Press OK to start the auto scanning.
◆
The number of stations automatically stored by
the VCR depends on the number of stations
that it has found.
Satellite Receiver or other Equipment
Aerial Connector
7
The current time and date are displayed
automatically.
Check the date and time.
if it is :
2
◆
Correct, Press RETURN button twice to exit the
menu.
Incorrect, see page 9.
1
◆
TV
Auto setup
Please wait
00 %
SCART Cable
RF coaxial cable
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2004 THU
◆
Auto preset can be performed by pressing on
the VCR continuously for 5 seconds or more
with no tape inserted.
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-8
Tuning Your Television for the
DVD-VCR
Setting the Date and Time
It is only necessary to tune your DVD-VCR if you are
not using a SCART.
Your DVD-VCR contains a 24-hour clock and calendar
used to:
◆
◆
Automatically stop programme recording
Preset your DVD-VCR to record a programme
automatically
◆
To view pictures from your DVD-VCR when a
Scart cable is used, the television must be set to
the audio/video mode (AV).
You must set the date and time when:
You purchase the DVD-VCR
◆
1
2
Switch on the television.
◆
The time and date are set automatically
from the broadcast signal. If the signal is
weak or ghosting occurs, the time and
date may not be set automatically.
In this case, they should be set manually.
Do not forget to reset the time when you
change clocks from winter to summer
time and vice versa.
◆
Switch on the DVD-VCR by pressing STANDBY/ON
on the front of the DVD-VCR or STANDBY/ON on
the remote control.
3
4
Select a programme position on the television to be
reserved for use with your DVD-VCR.
◆
Insert the video cassette in the DVD-VCR. Check
that the DVD-VCR starts reading the cassette;
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
if not, press
button.
❿
II
5
6
7
Start a scan on your television or set the television
to UHF channel 36.
Fine tune the television until the pictures and sound
are obtained clearly.
If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the DVD-VCR
output channel (see Setting the DVD-VCR Output
Channel on page 14 and Problems and Solutions
on page 45).
2
3
Press the corresponding
the Clock option.
ꢀ
,
❷
buttons to select
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Press the OK or
Result: The Clock Set menu is displayed.
❿
to select this option.
Result: That programme is now reserved for use
with your DVD-VCR.
Clock Set
Time
Date
Year
12 : 00
1 / JAN / 2004 THU
4
5
Press
month and year.
Result: The option selected highlight.
➛
or
❿
to select the hour, minutes, day,
Press the
the value.
ꢀ
or
❷
buttons to increase or decrease
Result: The day of the week is displayed
automatically.
◆
You can hold the
more quickly through the values.
ꢀ
or
❷
buttons down to scroll
6
On completion, press RETURN to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-9
Setting the Menu Language
Presetting the Stations Automatically
1
Open “MENU”
After pressing the MENU, press the OK or
You do not need to preset the stations if you
◆◆◆
have already set them automatically (see Plug &
❿.
Auto Set Up on page 8).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
◆
◆
Plug & Auto Set up (see page 8)
Automatically
Manually (see page 11)
You can store up to 80 stations.
2
3
Select “Language”
Use the
ꢀ
or
❷
buttons to highlight Language,
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
then press the OK or
❿.
Set menu Language
Place the selection arrow next to your desired
Language, then press the OK button.
Language Set
English
Français
Deutsch
Español
Italiano
Nederlands
2
3
Press the corresponding
the Install option.
ꢀ
,
❷
buttons to select
Press the OK or
❿
to select this option.
4
On completion, press RETURN to exit the menu.
Result: The Install menu is displayed.
Install
Auto Setup
Manual Setup
TV System
:
K
VCR Output CH
: CH 36
4
5
Press the corresponding
Auto Setup is selected.
And then press the OK or
ꢀ
or
❷
buttons, until the
❿
to select this option.
Press the
ꢀ
or
❷
buttons to select your country.
The VCR searches for the stations
according to a preset preference list
corresponding to the country that you have
selected.
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-10
Presetting the Stations Manually
6
7
Press OK button.
You do not need to preset the stations manually if
◆◆◆
Result: A message appears, indicating that any
channels already preset on your DVD-VCR
will be deleted.
you have already set them automatically.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press OK to start the auto scanning.
2
Press the corresponding
Install option.
ꢀ
,❷buttons to select the
Auto Setup
3
Press the OK or
Result: The Install menu is displayed.
❿
to select this option.
Your data will be lost
Press OK to continue
Menu to exit
Install
Auto Setup
Manual Setup
TV System
:
K
VCR Output CH
: CH 36
Auto Setup
Please Wait
15%
4
5
Press the corresponding
Manual Setup option is selected.
ꢀ
or
❷
buttons, until the
Press the OK or to select a Manual Setup option.
❿
Result: The TV STATION TABLE menu is displayed.
Result:
◆
◆
The Please Wait indication highlight on
the television screen.
The first frequency band is scanned and
the first station found is displayed and
stored.
The DVD-VCR then searches for the
second station and so on.
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
TV STATION TABLE
PR
1
CH
NAME
DEC
2
3
4
◆
◆
5
SWAPPING : OK
RETURN
DELETE
:
CLEAR
6
7
Press the
ꢀ
or
❷
buttons to select a programme
◆
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
number as required.
Press the button to preset the station.
Result: The MANUAL TUNING menu is displayed.
❿
8
If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
MANUAL TUNING
◆◆◆◆
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set
automatically. In this case, they should be set
manually (see page 11).
PR
:
:
:
:
:
CH
- - -
-
MFT
DECODER
NAME
OFF
- - - -
MEMORY
:
OK
RETURN
◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required
(see page 12).
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-11
Presetting the Stations Manually
Clearing a Preset Station
8
9
Press the
channels.
➛
or
❿
buttons to start scanning the
If you have stored a TV station:
◆◆
◆
That you do not require
Result: The frequency band is scanned and the first
station found is displayed.
◆
At the wrong programme position you can
cancel it.
Press the
❷
button, until the DECODER is selected.
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
10 Press the
❿
button to activate or deactivate use of the
decoder for the TV station, if necessary.
Press the corresponding
the Install option.
ꢀ
,❷
buttons to select
11 Press the
ꢀ
or❷
buttons until the NAME is selected.
The station name is set automatically from the
broadcast signal.
3
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
12 To change the programme’s name, press the ❿ꢁbutton.
Result: The first letter of the name flashes.
Install
13 To...
Then...
Auto Setup
Manual Setup
TV System
VCR Output CH
:
K
Select a character Press the
ꢀ
or❷
button until
: CH 36
the in the namerequired
character is displayed (letters,
numbers or “-” character).
Move to the next or Press the
previous character respectively.
➛
or
❿
buttons
4
5
Press the corresponding
Manual Setup option is selected.
ꢀ
or
❷
buttons, until the
14 If you...
Then...
Press the OK or to select a Manual Setup option.
❿
Result: The TV STATION TABLE menu is displayed.
Wish to store the
station displayed
◆
◆
Press the
until the MFT is selected.
Press the buttons to
ꢀ
or
❷
buttons
➛
or
❿
TV STATION TABLE
adjust the picture, if necessary.
PR
1
CH
21
NAME
DEC
OFF
- - - -
◆
◆
Press OK to store the station
2
3
Do not wish to
store the station
displayed
Press the
until the CH is selected.
Press the or buttons to
ꢀ
or❷ꢁbuttons
4
5
◆
➛
❿
SWAPPING : OK
RETURN
DELETE
:
CLEAR
go on scanning the
frequency band and display
the next station
6
Press the corresponding
required preset TV station (PR) is selected.
ꢀ
or❷buttons, until the
◆
Go back to the beginning of
Step 14
7
8
Press the CLEAR button.
15 Repeat this procedure from Step 6 onwards, until
Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
all the required stations have been stored.
16 On completion, press the RETURN button three
9
On completion, press the RETURN button four
times to exit the menu.
times to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-12
Changing the Preset Station Table
You can rearrange the Station Table and give different
programme numbers to the stations listed according to
your own preferences.
6
7
Press the corresponding
ꢀ
or
❷
buttons, until the
required preset TV programme is selected.
Result: The selected station is displayed at the
same time on the television screen.
To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
1
2
3
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
the Install option.
ꢀ
,❷
buttons to select
8
9
Press the
ꢀ
or
❷
buttons to select required
Press the OK or
❿
buttons to select this option.
position. And then press OK again to swap the
position.
Result: The Install menu is displayed.
On completion, press the RETURN button four
times to exit the menu.
Install
Auto Setup
Manual Setup
TV System
:
K
VCR Output CH
: CH 36
Selecting the RF OUT Sound Mode
(B/G-D/K)
You can choose the sound mode (B/G or D/K)
according to the TV set connected to your VCR.
4
5
Press the corresponding
Manual Setup option is selected.
ꢀ
or
❷
buttons, until the
1
2
3
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the OK or button to select this option.
❿
Result: The TV STATION TABLE menu is displayed.
Press the corresponding
the Install option.
ꢀ
,
❷
buttons to select
TV STATION TABLE
Press the OK or
❿
to select this option.
PR
1
CH
21
NAME
DEC
OFF
- - - -
Result: The Install menu is displayed.
2
3
4
Install
5
Auto Setup
SWAPPING : OK
RETURN
Manual Setup
TV System
K
G
DELETE
:
CLEAR
:
K
VCR Output CH
: CH 36
TV STATION TABLE
NAME
PR
1
CH
DEC
OFF
2
- - - -
3
21
4
Press the OK or
option is selected.
❿
buttons, until the TV System
4
5
SWAPPING : OK
RETURN
5
6
Press the OK or
❿
buttons to select G or K.
DELETE
:
CLEAR
On completion, press RETURN to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-13
Setting the DVD-VCR Output
Channel
Selecting the Colour Mode
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
◆◆◆
◆
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
◆
1
2
3
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
the Install option.
ꢀ
,
❷
buttons to select
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Install
Auto Setup
Press the corresponding
the User Set option.
ꢀ
,
❷
buttons to select
CH:21
Manual Setup
TV System
VCR Output CH
:
CH:36
:
:
K
: CH 36
3
Press the OK or
❿
to select this option.
CH:69
Result: The User Set menu is displayed.
User Set
Auto
Colour System
NICAM
:
:
:
:
Auto
On
PAL
MESECAM
B/W
4
5
Press the
CH option is selected.
ꢀ
or
❷
buttons, until the VCR Output
IPC
On
Off
ShowView Extend
Select the required output channel (CH21~CH69)
by pressing the OK or
❿
buttons
◆◆◆CH21 .. CH36
◆
◆ .. CH69
4
5
Press the corresponding
Colour System option is selected.
ꢀ
or ❷ꢁbuttons, until the
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
Press the OK or button to select
❿
Auto PAL ◆◆MESECAM ◆◆B/W.
◆
Auto When playing back a cassette, the system
standard is automatically selected by the
DVD-VCR.
B/W Black and White
6
On completion, press RETURN three time to exit
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-14
NICAM
Intelligent Picture Control
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language).
The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound. Please refer to page 22.
1
During playback, press the MENU button on the
remote control.
Result: The Setup menu is displayed.
1
2
3
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
2
3
4
Press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
the User Set option.
ꢀ
,
❷
buttons to select
Press the corresponding
the User Set option.
ꢀ
,
❷
buttons to select
Press the OK or
❿
to select this option.
Press the OK or
Result: The User Set menu is displayed.
❿
buttons to select this option.
Result: The User Set menu is displayed.
User Set
User Set
Colour System
NICAM
:
:
:
:
Auto
On
On
Off
Colour System
NICAM
:
:
:
:
Auto
On
IPC
On
Off
On
Off
ShowView Extend
IPC
On
Off
ShowView Extend
4
5
Press the corresponding
NICAM option is selected.
ꢀ
or
❷
buttons, until the
5
6
Press the corresponding
IPC option is selected.
ꢀ
or
❷
buttons, until the
To...
Press OK or
❿, until...
Press the OK or
❿
buttons to select the IPC
(intelligent picture control) option.
Mono mode
Off is displayed.
◆
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
Off: Only set at this position to
record the standard mono
sound during a NICAM
broadcast if the stereo
sound is distorted due to
inferior reception conditions.
7
8
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
❷
Press the
➛
or
❿
buttons until the picture is
NICAM mode
On is displayed.
On: Normally set at this
position.
displayed according to your preferences.
◆
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
6
On completion, press RETURN three times to exit
the menu.
9
On completion, press RETURN three times to exit
the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-15
ShowView Extend
Auto Power off
To prevent delays or over-runs the VCR has a function
called ShowView EXTEND allowing you to extend the
recording time by up to 60 minutes.
The Auto Power Off feature automatically turns off
your DVD-VCR if no signal is received and you do not
press any button for the selected time.
◆◆◆Only use if PDC is not available or set to Off.
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
1
2
After pressing the MENU, press the OK or
❿.
Press the corresponding
ꢀor
❷
buttons, until the
Auto Power Off option is selected.
Press the corresponding
the User Set option.
ꢀ,
❷
buttons to select
3
Press the OK or
Result: The User Set menu is displayed.
❿
buttons to select this option.
Language
:
English
Install
User Set
Off
Auto Power Off
Screen Messages
:
:
Off
On
1Hour
2Hour
3Hour
User Set
Colour System
NICAM
:
:
:
:
Auto
On
Off
10
20
30
40
50
60
IPC
On
Off
ShowView Extend
3
4
Press the OK or
of Auto Power Off interval.
Off 1Hour 2Hour
❿
buttons, until you select the time
◆
◆
◆
◆
3Hour
4
5
6
Press the corresponding
ꢀ
or
❷
buttons, until the
On completion, press return twice to exit the menu.
ShowView Extend option is selected.
Press the OK or buttons to set the ShowView
Extend time by increments of 10 minutes.
❿
Screen Messages
To turn off, press OK or
Off shows.
❿
buttons repeatedly until
Your DVD-VCR displays most information both on the
DVD-VCR and the television.
You can choose to display or hide this information on
the television screen (except for the SEARCH,
Programming MENU and Timer functions, which
cannot be hidden).
1
2
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
❿.
Press the corresponding
ꢀor
❷
buttons, until the
Screen Messages option is selected.
Language
:
English
Install
User Set
Auto Power Off
Screen Messages
:
:
Off
On
On
Off
3
4
To...
Display on-screen information On is displayed.
Hide on-screen information Off is displayed.
Press OK or
❿, until...
On completion, press RETURN twice to exit the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-16
Selecting the Cassette Type
Selecting the Recording Speed
If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
You can record a cassette at two different speeds:
◆
◆
SP (Standard Play)
LP (Long Play)
In Long Play modes:
1
2
After pressing the MENU press the corresponding
buttons to select the VCR option.
◆
◆
Each cassette lasts twice as long
The recording is of a slightly lower
quality.
ꢀ,
❷
Press the OK or buttons to select this option.
Result: The VCR Setup menu is displayed.
Press the corresponding or buttons, until the
Tape Select option is selected.
❿
To record a cassette... Press the SPEED button on
the remote control, until...
3
ꢀ
❷
In standard play mode
In long play mode
SP is displayed.
VCR Setup
E180
E240
E260
E300
LP is displayed.
Tape Select
:
E180
Off
Repeat Play
:
T
ype
Recording Time (in SP)
180 mins. or 3 hours
E-180
E-240
E-260
E-300
240 mins. or 4 hours
260 mins. or 4 hours and 20 mins.
300 mins. or 5 hours
4
5
Press the OK or
required, until the correct cassette length is
displayed.
❿
buttons as many times as
ꢁ
E180
ꢁ
ꢂ
E240
E260
E 300
ꢂ
Protecting a Recorded Cassette
Press RETURN twice to exit the menu.
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
Repeat Play
1
2
If you wish to protect a cassette, break off the tab
using a small screwdriver.
You can set repeat play to repeat the tape continuously
from beginning to end.
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
VCR Setup
Tape Select
:
E180
Off
Off
On
Repeat Play
:
To...
Press OK or
❿, until...
Repeat play
On is displayed.
Do not wish to repeat play
Off is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-17
Recording a Programme
Immediately
Recording a Programme with
Automatic Stop
Before recording a programme, you must have preset
the corresponding station (unless you are recording via
an external video source). If you have not done so,
refer to pages 10 and 11.
This function enables you to record up to nine hours
(LP) of programmes.
Your DVD-VCR stops automatically after the requested
length of time.
1
2
Switch on the television.
1
2
Switch on the television.
To monitor the programme being recorded, select
the television channel reserved for use with your
DVD-VCR (or the AV input if used).
To monitor the programme being recorded, select
the television channel reserved for use with your
DVD-VCR (or the AV input if used).
3
4
Insert the cassette on which the programme is to be
recorded, with the window visible and the safety tab
intact or the opening covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
3
4
Insert the cassette on which the programme is to
be recorded, with the window visible and the safety
tab intact or the opening covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
Select:
Select:
◆
The station to be recorded using the PROG
◆
The station to be recorded using the PROG
(
or
) buttons
(
or ) buttons
or
or
◆
The AV1, AV2 or AUX source using the INPUT
SEL. button for a satellite tuner or external
video source
◆
The AV1, AV2 or AUX source using the INPUT
SEL. button for a satellite tuner or external
video source
Result: The station number is displayed and the
programme can be seen on the television.
Result: The channel number is displayed and the
programme can be seen on the television.
5
6
Select the recording speed by pressing the SPEED
button as many times as required (see page 17).
5
6
Select the recording speed by pressing the SPEED
button as many times as required (see page 17).
Hold REC ( ) down for a while to start recording.
◆
Hold the REC button ( ) down for a while to start
◆
Result: The record indicator appears on the
television and DVD-VCR display. An index
is recorded on the tape (see page 26).
recording.
Result: The record indicator appears on the
television screen and DVD-VCR display.
An index is recorded on the tape.
7
To stop recording, press once.
◆
7
Press the REC button ( ) several times to increase
the recording time in:
◆
◆
◆
If your DVD-VCR ejects the cassette when you
start recording, check to make sure that the
cassette’s safety tab is intact or that the
opening (created by a broken safety tab) is
covered with adhesive tape.
◆
◆
30-minute intervals up to four hours
1-hour intervals up to nine hours
Result: The length is displayed on the television
displays. The selected programme is
◆
If you reach the end of the tape while
recording, the cassette rewinds automatically.
recorded for the length of time requested.
At the end of that time, the DVD-VCR stops
recording automatically and power off.
8
If you wish to cancel the recording before the end,
press STANDBY/ON.
◆
◆
If the end of the tape is reached while recording:
◆
The recording stops and power off.
This function is not available in DVD recording
LENGTH 2:30
SET LENGTH :
PRESS REC
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-18
Using the ShowView Feature
Before presetting your DVD-VCR:
3
Press the OK button.
Result: The information concerning the programme
is displayed.
◆
◆
◆
Switch on both the television and your DVD-VCR
Check that the date and time are correct
Insert the cassette on which the programme is to
be recorded (safety tab intact)
◆
When using the ShowView function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
Up to six programmes can be preset.
1 To enter a ShowView, press the TIMER button.
ꢀor
❷
buttons. Refer to the following page if:
Press the or and OK or buttons to select
ꢀ
❷
❿
ShowView
Result: A message is displayed to allow you to
enter the ShowView code.
◆
If all six programmes have been set, the
message Timer is full is displayed. Refer to
page 24 if you wish to cancel a preset
recording.
Timer Method
Standard
ShowView
◆
◆
The programme number or times flash
You wish to modify the programme
4
5
If the programme and times are correct, press the
RETURN button.
Press the STANDBY/ON button to activate the
timer.
6
Refer to page 21~22 if you wish to:
ShowView
◆
Check that your DVD-VCR has been
programmed correctly
Code
Code
:
:
0 - 9
◆
Cancel a preset recording
Correct
◆
The numbers next to each TV programme listing
are ShowView code numbers, which allow you to
programme your videorecorder instantly with the
remote control. Tap in the ShowView code for the
programme you wish to record.
2
Press the numeric buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
™ShowView is a trademark of Gemstar Development
Corporation. The ShowView system is manufactured under
licence from Gemstar Development Corporation.
◆
If you wish to correct the ShowView code that
you are entering:
◆
Press the
corrected is cleared
Enter the correct digit
➛
button until the digit to be
◆
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-19
Modifying ShowView Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press RETURN a second time to confirm.
If you wish to...
Then...
Select an input source other
than the tuner (AV1, AV2 or AUX)
◆
◆
Press the
➛
or
❿
buttons, until the PR selection mode.
Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
•
The AV1, AV2 or AUX source using the INPUT SEL.
button for a satellite tuner or external video source
◆ The input source must be selected before changing any other
value.
Record a programme every day
(Monday to Sunday) at the same time
◆
◆
Press the
Press the
displayed.
➛
or
or
❿
buttons, until the DAY selection mode.
buttons, until the DLY (Daily) value is
ꢀ
❷
Record a programme every week
on the same day and at the same time
◆
◆
Press the
Press the
➛
or
or
❿
buttons, until the DAY selection mode.
buttons, until the W- (Week) value is
ꢀ
❷
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time
Select the recording speed
◆
◆
Press the
Press the
time.
➛
ꢀ
or
or
❿
❷
buttons, until the STOP selection mode.
buttons to increase or decrease the stop
◆
◆
Press the
mode.
Press the
displayed:
➛
or
or
❿
buttons, until the recording speed selection
buttons until the correct indication is
ꢀ
❷
•
•
•
AUTO (Auto Tape Speed Select)
SP (Standard Play)
LP (Long Play)
Select the PDC recording
◆
◆
Press the
Press the
➛
ꢀ
or
or
❿
❷
buttons, until the PDC off mode.
buttons until the “On” indication is displayed.
◆
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting “On” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-20
Using the Timer Programming
Feature
The Timer Programming feature allows you to preset
the DVD-VCR to record a programme up to one month
before that programme is to be broadcast. Up to six
programmes can be preset.
12 Select the required recording stop time by pressing
the or❷ꢁbuttons, following the same procedure
as when selecting the recording start time.
ꢀ
13 Press to select the recording speed.
❿
◆
Before presetting a recording, check that the
date and time are correct.
14 Press the ꢀor❷ buttons to select the SP
(Standard Play), LP (Long Play), Auto (Auto Tape
1
Insert the cassette and press TIMER on the remote
control.
speed Select) recording speeds.
15 Press the
ꢀor❷
buttons to toggle between the
Result: The Timer Method is displayed.
PDC mode (marked On) and the non PDC mode
(marked Off).
Timer Method
Standard
16 When you have finished, press the RETURN button.
ShowView
17 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR
compares the timer duration with the
remaining time on the cassette.
◆
Auto Tape Speed select. The DVD-VCR’s “Auto
Tape Speed select” function compares the
duration of the timer recording to the actual
recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the
whole programme.
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
Checking a Preset Recording
3
4
Press
❿
to select the input source.
You can check your preset recordings:
Select the required station by pressing the
buttons or INPUT SEL. to select the AV1, AV2 or
AUX input sources.
ꢀ,❷
◆
◆
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
5
6
Press
❿
to select the recording day.
1
Press TIMER on the remote control.
Result: The Timer Method is displayed.
Select the required day by pressing the
buttons.
ꢀor❷ꢁ
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
7
8
Press
❿
to select the recording start time.
Select the required hour value by pressing the
ꢀor
❷
buttons.
3
4
Press the
ꢀor
❷
buttons to select the required
programme.
9
Press
❿
to select the minutes.
Press the
➛
or
❿
buttons to select and change any
10 Select the required minute value by pressing the
values as required. For more details, refer to the
previous page.
ꢀor
❷
buttons.
11 Press
❿
to select the recording stop time.
5
On completion, press RETURN twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-21
Adjusting Picture Alignment
Manually
Cancelling a Preset Recording
You can cancel any programmes that are:
The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.
◆
◆
Incorrect
No longer required
When noise bars or streaks appear during playback,
adjust alignment manually by pressing the TRK buttons
until the picture is clear and stable.
1
Press TIMER on the remote control.
Result: The Timer Method is displayed.
Result:
◆
◆
◆
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you
release the button.
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3
4
Select the programme to be cancelled by pressing
the
ꢀ
or
❷
buttons.
Press the CLEAR button to cancel the selected
programme.
Selecting the Audio Output Mode
Result: All the recording information is deleted and
the broadcast will not be recorded.
5
On completion, press RETURN twice.
You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs.
The following options are available.
Option
Description
L
Used to listen to the sound on the left Hi-Fi
channel.
Playing a Cassette
R
Used to listen to the sound on the right
Hi-Fi channel.
This function allows you to play back any pre-recorded
cassette.
MIX
Used to listen to the mixed sound of the
Hi-Fi and normal channels.
1
2
Switch on both the television and your DVD-VCR.
MONO
L R
Used to listen to the sound on the normal
mono channel.
Insert the video cassette to be played. If the safety
tab on the cassette is intact, press ❿ll
.
Otherwise, the cassette is played automatically.
Used to listen to Hi-Fi stereo sound on the
left and right channels.
◆◆◆When playing back tapes recorded in
Hi-Fi, the sound switches to Hi-Fi after
five seconds of Mono.
◆◆◆When a cassette is loaded, the tape position is
optimized automatically to reduce disturbance
(Digital Auto Tracking).
When playing a cassette, if the end of the tape
is reached, the cassette is rewound
automatically.
NTSC tapes can be played back but cannot
be recorded with this DVD-VCR.
To select the sound mode, simply press the AUDIO
button on the remote control until the required option is
displayed.
L
R
MIX
3
To...
Then press...
L R
MONO
Stop the playback
Eject the cassette
(STOP).
◆
(EJECT).
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-22
Playing a Sequence at Variable
Speeds
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
You can vary the playback speed using the Shuttle
function (up to nine times the normal speed).
◆◆◆No sound is heard when playing back a
cassette in slow motion.
Example: You wish to analyse a sportsperson’s
technique, movement by movement.
1
Press:
◆
◆
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
❿❿ to start SLOW mode.
➛➛ or ❿❿ button as many times as required to
decrease or increase the speed respectively
To return to the normal speed, press the ❿ll
button twice.
The Shuttle function is available on the Remote control
◆◆◆No sound is heard when playing a sequence at
variable speeds.
1
2
Press:
◆
◆
◆
❿ll during playback
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
◆
2
When playing back in slow motion, picture
interference may occur.
Each time you press a SHUTTLE button, the speed
is changed as shown in the following illustration.
Press the TRK buttons to minimize this effect.
◆
When you have been using the Slow Motion
function for more than about two minutes, the
DVD-VCR will automatically play to protect the:
REVERSE REVERSE REVERSE
SLOW
STILL MOTION MOTION PLAY
X1/10 X1/5
SLOW
PLAY PLAY PLAY
X3 X5 X9
PLAY
X9
PLAY
X5
PLAY
X3
◆
Cassette
◆
Video heads
Playing a Sequence Frame by
Frame
You can
◆
Stop the cassette at a given frame (image)
◆
Advance one frame at a time
◆◆◆No sound is heard when playing back frame by
frame.
1
Press:
◆
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
F.ADV/STEP to advance frame by frame
2
To return to normal playback, press ❿ll.
◆◆◆Vertical stability: When playing back frame by
frame, interference may be seen on the screen.
Press the TRK buttons to minimize this effect.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-23
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an
“index” is automatically marked on the tape when
recording starts.
End Search
Use this feature when you want to search for a blank
position to record a program on a cassette.
The Search function allows you to fast-forward or
rewind to a specific index and start playback from that
point. Depending on the direction selected, the indexes
are numbered as follows:
The VCR will fast forward, searching for a blank
position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end
search, the tape will be ejected.
Prev
Seq.
Seq. being
played
Next
Seq.
Intro Scan
etc.
etc.
1
After pressing the SEARCH, press the
corresponding or buttons, until the Intro Scan
option is selected.
2
1
1
2
ꢀ
❷
◆◆◆This DVD-VCR uses a standard indexing system
(VISS). As a result, it will recognize any indexes
marked by other VCRs using the same system
and vice versa.
2
3
Press the OK or
❿.
Press the ➛➛ or ❿❿ buttons depending on the
direction where your desired programme is located.
4
5
When an Index mark is found the DVD-VCR will
playback the tape for 5 seconds, after which it will
continue searching for the next Index mark.
Go To [0:00:00] Stop
Use this feature when you want to search for the
0:00:00 counter position on a cassette. Press the
CLEAR button at the point on the tape where you want
to set the counter to 0:00:00.
If you want to watch the tape from a particular
Index, simply press
❿
II
button twice.
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at
that position.
INTRO SCAN
:
1
After pressing the SEARCH, press the
corresponding or buttons, until the Go To
[0:00:00] option is selected.
ꢀ
❷
2
Press the OK or
❿.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-24
Using the Tape Counter
Searching for a Specific Sequence
The tape counter:
Index Skip Search
◆
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
This feature will enable you to fast forward/rewind to a
specific point on a tape: E.g. if you have recorded 3
different programmes on a tape and you have rewound
the tape to the beginning, by using this feature you can
go directly to the start of programme 2 simply by
pressing the SEARCH button.
◆
◆
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
◆
If the remaining time is to be calculated
correctly, you must indicate the type of cassette
being used.
1
After pressing the SEARCH, press the
corresponding or buttons, until the Intro
Scan option is selected.
ꢀ
❷
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a
sequence:
2
3
Press the OK or
❿.
Press the ➛➛ or ❿❿ buttons twice more.
This will take you directly to the start of the desired
programme is located.
◆
◆
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape
counter to zero
4
5
These Index searches can be made forwards:
(press ❿❿) or backwards: (press ➛➛).
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆ ◆
◆
◆
(
➛➛ -20
To cancel an Index search simply press the
button.
0
+20 ❿❿✌
❿
or
II
◆
0:00:00
INDEX SEARCH
:
-
6
3
When you are ready,
◆
◆
◆
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at
◆
which the counter was set to zero, press ➛➛ or
❿❿.
◆
Some DVD-VCR information, such as the counter,
can be displayed on the television screen (unless
you have deactivated the Screen messages mode;
refer to page 17).
Press INFO. :
◆
Once to display the current function,
programme number, recording speed, date,
time and counter
◆
◆
Twice to display the counter only
Three times to display the time remaining on
the cassette
◆
Four times to clear the display
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-25
Connecting an RCA
Audio/Video Input Cable
Using the Assemble Edit Function
You can connect other audio/video equipment to your
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change.
Examples:
◆
You wish to copy a video cassette with
the help of a second VCR.
1
2
3
Insert the cassette to be edited in your DVD-VCR.
Press the ❿ll button to start playback.
◆
You wish to play back and/or copy
pictures taken with a camcorder .
When you reach the position from which you wish
to start the new recording, press the ❿ll button.
◆
1
Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
4
5
6
Press the F.ADV/STEP button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
Connect one end of the RCA audio/video cable into
the VIDEO INPUT socket on the front of the DVD-VCR.
While the DVD-VCR is in still mode, hold the REC
2
Plug the other end of the audio/video cable into the
appropriate output connector on the other system
(VCR or camcorder).
button
Assemble Edit function.
(
)
down for a while to activate the
◆
Select the source from which you wish to record by
pressing:
3
4
Connect one end of the RCA audio cable supplied
into the AUDIO INPUT sockets on the front of the
DVD-VCR.
◆
◆
The PROG buttons for television channels
The INPUT SEL. button for the AV1, AV2 or
AUX input sources
◆◆◆Take care to respect the colour coding of the
left and right channels.
7
8
Press the ❿ll button to start recording.
Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
When you have finished recording, press
.
◆
AUX
1
AUX
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-26
Recoding from Another VCR
or Camcorder
Using the TV Buttons on the
Remote Control
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
camcorder.
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
◆
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
1
2
3
Switch your television on.
Point the remote control towards the television.
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
1
Connect the DVD-VCR, from which the cassette is
to be copied, to the appropriate SCART audio and
video input connectors on the rear of your
DVD-VCR, as indicated on page 8.
Brand
SAMSUNG 01 to 06
AKAI 09, 23
GRUNDIG 09, 17, 21
LOEWE 02
Codes
Brand
Codes
2
3
Insert a blank cassette in your DVD-VCR.
PHILIPS 02, 20, 22
Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
SABA
SONY
13, 14, 22 to 24
15, 16
4
Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:
THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21
◆
◆
AV1, AV2 for the SCART input
AUX for the RCA input
Result: If your television is compatible with the
remote control, it will switch off. It is now
programmed to operate with the remote
control.
5
6
Start playing back the cassette to be copied.
Hold REC down for a while to start recording
on your DVD-VCR.
( )
◆
‚
◆
If several codes are indicated for your
television brand, try each one in turn until you
find one that works.
7
When you have finished recording, press
both VCR and DVD-VCR.
on
◆
◆
When you change the batteries in the remote
control, you must reprogramme the code, following
the same procedure.
◆
If you wish to view the cassette being copied:
◆
Your DVD-VCR must be connected as usual to
the television (see page 6 for further details).
You can then control the television using the following
buttons.
Button
Function
STANDBY/ON
Used to switch the television and
DVD-VCR on and off.
TV or VCR
Used to switch between the TV and
VCR modes.
INPUT SEL.
Used to select an external source.
VOL + or –
Used to adjust the volume of the
television.
PROG/TRK
Used to select the required
programme.
(
or
)
TV MUTE
Used to mute the volume of the
television.
◆
The various functions will not necessarily work
on all televisions. If you encounter problems,
operate the television directly.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-27
Choosing a Connection
Setting Up the Language Features
The following show examples of connections commonly
used to connect the DVD -VCR player with a TV and
other components. It is only available for DVD.
The VCR out can not watch by this connection.
If you set the player menu, disc menu, audio and
subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Disc Menu Language
Connection to
an Audio System
Connection to
a Television
1
2
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button
ꢀ,❷
❿
Television
Setup
Setup
Display Setup
Setup
:
Dolby Digital Decoder
Digital Audio Input Jack
COAXIAL
OPTICAL
3
Select Language Setup using
ꢀ,❷
buttons, then
press the OK or
❿
button.
Language Setup
Disc Menu
Audio
:
:
:
English
English
Automatic
Subtitle
or
4
5
Select Disc Menu using
the OK or ❿ꢁbutton.
ꢀ,❷
buttons, then press
COAXIAL
OPTICAL
Use the
ꢀ,❷
buttons to select English.
- Select “Others” if the language you want is not listed.
Digital Audio out Jack
S-Video Jack
Disc Menu Language
Disc Menu
6
Press the OK button.
- English is selected and the screen returns to
Language Setupmenu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-28
Setting Up the Language Features
Using the Audio Language
Using the Subtitle Language
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or ❿ꢁbutton.
Select Language Setup using buttons, then
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or ❿ꢁbutton.
Select Language Setup using buttons, then
ꢀ
,
❷
ꢀ,❷
ꢀ
,
❷
ꢀ,❷
press the OK or
❿
button.
press the OK or
❿
button.
Language Setup
Language Setup
Disc Menu
Audio
:
:
:
English
English
Automatic
Disc Menu
Audio
:
:
:
English
English
Automatic
Subtitle
Subtitle
4
5
Select Audio using
OK or button.
ꢀ,❷
buttons, then press the
4
5
Select Subtitle using
OK or ❿ꢁbutton.
ꢀ,❷
buttons, then press the
❿
Press the
ꢀ,❷
buttons to select English.
Use the
ꢀ,❷
buttons to select English.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select “Automatic” if you want the subtitle
language to be the same as the language selected
as the audio preference.
- Select “Others” if the language you want is not listed.
Subtitle Language
Automatic
Subtitle
- Select “Others” if the language you want is not
listed. Some discs may not contain the language
you select as your initial language; in that case the
disc will use its original language setting.
6
Press the OK button.
- English is selected and the screen returns to
Language Setup menu.
6
Press the OK button.
- English is selected and the screen returns to
Language Setup menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-29
Setting Up the Audio Options
1
2
With the unit in Stop mode, press the MENU button.
ꢃ
ꢃ
MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream
Select DVD using
ꢀ,❷
buttons, then OK or ❿ꢁbutton.
Setup
Setup
Display Setup
Setup
when using the Digital Audio Output.
:
DTS
1. Off :
2. On :
Doesn’t output digital signal.
Outputs DTS Bitstream via digital
output only. Select DTS when
connecting to a DTS Decoder.
3
4
Select Audio Setup using
the OK or button.
ꢀ,❷
buttons, then press
❿
ꢃ
ꢃ
Dynamic Compression
1. On :
2. Off :
To select dynamic compression.
To select the standard range.
Use the buttons to select the desired item.
ꢀ,❷
Then press the OK or
❿
button.
PCM Down Sampling
Dolby Digital Out
MPEG-2 Digital Out
DTS
1. On :
2. Off :
Select this when the amplifier
connected to the player is not 96KHz
compatible.
In this case, the 96KHz signals will be
down converted to 48KHZ.
PCM Down Sampling
Select this when the amplifier
connected to the player is 96KHz
compatible.
In this case, all signals will be output
without any changes.
ꢃ
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
◆
• How to make the SETUP menu disappear or
return to menu screen during set up; Press
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using
the Digital Audio Output.
RETURN or
➛
button.
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
◆◆◆Be sure to select the correct Digital Output or no
audio will be heard.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-30
Setting Up the Display Options
1
2
With the unit in Stop mode, press the MENU button.
ꢃ
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting (aspect ratio).
Select DVD using
ꢀ,❷
buttons, then OK or
❿
button.
1. 4:3 Letter Box : Select when you want to see
the total 16:9 ratio screen DVD
supplies, even though you have
a TV with a 4:3 ratio screen.
Setup
Setup
Display Setup
Setup
:
Black bars will appear at the top
and bottom of the screen.
2. 4:3 Pan Scan : Select this for conventional size
TVs when you want to see the
central portion of the 16:9
screen. (Extreme left and right
side of movie picture will be cut
off.)
3
4
Select Display Setup using
press the OK or button.
ꢀ,❷
buttons, then
❿
Use the buttons to select the desired item.
ꢀ,❷
3. 16:9 Wide :
You can view the full 16:9
picture on your widescreen TV.
Then press the OK or
❿
button.
Display Setup
ꢃ
ꢃ
Black Level
TV Aspect
:
4:3 L-Box
Adjusts the brightness of the screen.(On/Off)
Black Level
NTSC Disc Output
DVD Out
:
:
PAL60
RGB
NTSC Disc Output
“NTSC” if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave “ PAL60” as is.
ꢃ
DVD Out
RGB :
Sends RGB signal from the AV JACK
(SCART terminal).
S-Video :
Video :
Sends S-VIDEO signal from the AV
JACK (S-Video terminal).
Sends COMPOSITE VIDEO signal
from the AV JACK (SCART terminal).
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-31
Setting Up the Parental Control
The Parental Control function works in conjunction
with DVDs that have been assigned a rating - which
helps you control the types of DVDs that your family
watches.
Yes
There are up to 8 rating levels on a disc.
1
2
3
With the unit in Stop mode, press the MENU button.
Select DVD using buttons, then OK or button.
Select Parental Setup using buttons, then
press the OK or button.
ꢀ
,❷
❿
ꢀ,❷
❿
Setup
Setup
Display Setup
Setup
:
.
.
ꢃ
About the Rating Level ;
The Rating Level will work only when Use Password
is set to Yes. To unlock the player, use , OK to
to select Rating Level.
❿
4
Use OK or
❿
to select Yes if you want to use a
select No. Use
Press OK.
ꢀ
or❷
password. The Enter Password screen appears.
- Use
ꢀ,❷
to select the level(e.g. Level 6) and
Parental Setup
press OK. Discs that contain Level 7 will now
not play.
No
Yes
Use Password
:
No
- To cancel the rating level, use
No in Use Password.
❿
or OK to select
ꢃ
About the Change Password ;
- Use to select Change Password.
ꢀ,❷
Press OK. The Change Password screen appears.
- Enter your new password. Re-Enter the new
password again.
◆
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or
➛
button.
~
• If you have forgotten your password, see Forget
Password in the Troubleshooting Guide.
5
Enter your password. The Re-Enter Password
screen appears to confirm the password.
Enter your password again. The Parental Setup
screen appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-32
A/V Receiver Connections
Special Playback Features
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
During DVD/CD playback you can select from the
following special playback options. To resume normal
playback, press the
❿ll button.
1
Still
Before You Begin...
Press the
playback.
❿ll button on the remote control during
•
If your A/V receiver is equipped with a Dolby
Digital Decoder, you have the option to bypass the
DVD-VCR’s built-in Dolby Digital Decoder. Use the
Digital Audio Out connection below.
• The picture will still and the audio will mute.
• To resume playback, press the ll button.
❿
• If the player is left in Still mode for 5 minutes, it
will stop automatically.
LINE OUT
2
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one frame
at a time.
AUDIO
DIGITAL
S-VIDEO OUT
AUDIO OUT
COAXIAL
OPTICAL
• Audio is muted during Frame Advance mode.
• Press
❿
ll to resume normal playback.
ꢂ O R ꢁ
NOTE: Frame Advance operates only in the forward
direction.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital Decoder
3
Skip Forward/Back
While a CD or DVD disc is in Play mode, press the
Skip l➛➛ / ❿❿l buttons on the remote control or
front panel to jump forward and backward through
disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current
chapter/track.
1
Digital Audio Out
Connect EITHER an optical cable OR a digital
coaxial cable from the Digital Audio Out jacks on the
back panel of the DVD-VCR to their corresponding
Digital Audio Input jacks on your A/V Receiver:
• Press Skip Back again to jump to the beginning of
the previous chapter/track.
• Optical
• Coaxial
• Use whichever connection is available on your
A/V Receiver.
Search Forward/Back
While a disc is in Play mode, press and hold the
➛➛
/
❿❿ buttons on the remote control or front panel
to visually search forward/backward at 2X - 4X - 8X -
16X - 32X - 128X speed. Press
resume normal speed.
❿ll button to
4
5
Slow Motion
During playback, press the
❿ll button still the
image. Then use the Search ❿❿ to play in slow
motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
Stop/Resume
• Press the Stop button once to stop playback.
To resume the DVD/CD from the point where the
disc stopped, press the
❿ll button.
• Press the button twice to completely
◆
stop playback. The next time you press
disc will start over from the beginning.
❿ll, the
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-33
Adjusting the Aspect Ratio (EZ View)
If you are using a 4:3 TV
To play back using aspect ratio (DVD)
1
Press the EZ VIEW button.
ꢃ
•
For 16:9 aspect ratio discs
•
The screen size changes when the button is
pressed repeatedly.
4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect
ratio.
The black bars will appear at the top and bottom of
the screen.
•
The screen zoom mode operates differently
depending on the screen setting in the initial DVD
menu.
•
To ensure correct operation of the EZ VIEW
button, you should set the correct aspect ratio in
the initial setup.
•
•
4:3 Pan Scan
The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.
Screen Fit
The top and bottom of the screen are cut off and the
full screen appears. The picture will look vertically
stretched.
If you are using a 16:9 TV
ꢃ
•
For 16:9 aspect ratio discs
•
Zoom Fit
Wide Screen
When a 4:3 DVD is viewed on a 16:9 TV, black bars
will appear at the left and right of the screen in order
to prevent the picture from looking horizontally
stretched.
Displays the content of the DVD title in 16:9 aspect
ratio.
•
•
Screen Fit
The top and bottom of the screen are cut off. When
playing a 2.35:1 aspect ratio disc, the black bars at
the top and bottom of the screen will disappear.
The picture will look vertically stretched. (Depending
on the type of disc, the black bars may not
disappear completely.)
ꢃ
•
For 4:3 aspect ratio discs
Normal Screen
Displays the content of the DVD title in 4:3 aspect
ratio.
Zoom Fit
•
•
Screen Fit
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
The top and bottom of the screen are cut off and the
full screen appears. The picture would look vertically
stretched.
Zoom Fit
ꢃ
•
For 4:3 aspect ratio discs
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
Normal Wide
Displays the content of the DVD title in 16:9 aspect
ratio. The picture will look horizontally stretched.
•
Screen Fit
The top and bottom of the screen are cut off and the
full screen appears. The picture will look vertically
stretched.
◆
This function may behave differently depending on
the type of disc.
•
•
Zoom Fit
The top, bottom, left and right of the screen are cut
off and the central portion of the screen is enlarged.
Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars
will appear at the left and right of the screen in order
to prevent the picture from looking horizontally
stretched.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-34
Using the Display Function
When Playing a DVD/CD
To access the desired title when there is more than
one in the disc. For example, if there is more than
one movie on a DVD, each movie will be identified.
1
2
3
During play, press the INFO. button on the remote.
TITLE
Use the
ꢀ
,❷
buttons to select the desired item.
Use the
➛
,
❿
buttons to make the desired setup.
•
You may use the number buttons of the remote
control to directly access a title, chapter or to start
the playback from the desired time.
Most of DVD discs are recorded in chapters so that
you can quickly find a specific passage.
CHAPTER
TIME
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
Refers to the language of the film soundtrack. In the
example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
ENG 5.1CH
ENG
AUDIO
Off
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
SUBTITLE
3D SOUND
A DVD disc can have up to 32 different subtitles.
ENG 5.1CH
ENG
A surround sound effect is generated using only two
front speakers.
Off
ENG 5.1CH
ENG
Off
~
4
To make the screen disappear, press the INFO.
button again.
➢
• What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-35
Changing the Camera Angle
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with
the subtitle button.
Using the ANGLE button
When a DVD contains multiple angles of a particular
scene, you can select the Angle function.
Using the SUBTITLE button
1
2
Press the SUBTITLE button.
Use the ❿ꢁbuttons to select the desired subtitle
language.
Use the buttons to determine whether or not
Press the ANGLE button to see if an ANGLE
➛
,
(
) mark is present at the upper Right hand corner
of the screen.
3
ꢀ
,
❷
1
When an ANGLE mark is shown, press the ANGLE
the subtitle will be displayed.
button, then an ANGLE select icon will appear at the
upper left hand corner of the screen.
• The subtitle languages are represented by
abbreviations.
2
3
Use the
angle.
➛
,
❿
buttons to select the desired screen
ENG
On
To turn off the display, press the ANGLE button
again.
ENG
Off
➢
• This function depends on what languages are
encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
wheneveryou play a DVD; Refer to “Setting Up the
Language Features” on page 29.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-36
Repeat Play
Selecting the Audio Language
Repeat the current track, chapter, title, a chosen section
(A-B), or all of the disc.
You can select a desired language quickly and easily
with the AUDIO button.
When playing a DVD
Using the Audio button
1
2
Press the REPEAT button on the remote.
Repeat screen appears.
1
2
Press the AUDIO button.
Use the buttons to select the desired language
on a DVD.
- The audio languages are represented by abbreviations.
Use the buttons to select Stereo, or
➛
,
❿
Select Chapter, Title or A-B using the
• Press the REPEAT button. Select A-B on screen
with the buttons.
➛
,
❿
buttons.
➛
,
❿
3
➛
,
❿
➛
❿
• Press OK at the point where you want the repeat
play to start (A). The B is automatically highlighted.
• Press OK at the point where you want the repeat
play to stop (B).
(On VCD/CD)
DVD
• To terminate the function, press the CLEAR button.
• A-B REPEAT does not allow you to set point (B)
until at least 5 seconds has elapsed after point (A)
has been set.
DVD
Chapter Title A - B
Off
VCD/CD
VCD/CD
Track Disc A - B
Off
➢
• This function depends on what languages are
encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up
whenever you play a DVD ; Refer to “Setting Up
the Language Features” on page 29.
3
4
Press OK.
To return to normal play, press REPEAT again, then
press the buttons to select Off and press OK.
➛
,
❿
• It is available to press CLEAR button on the
remote controller in order to stop REPEAT play.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-37
Using the Mark Function
MP3/WMA Play
This feature lets you mark sections of a DVD or VCD so
you can quickly find them at a later time.
If you insert an MP3/WMA Disc into the DVD/VCD
player, you can see the folder directory.
•
•
Select the desired folder in the root directory.
Use the OK or
folder.
Using the Mark Function (DVD/VCD)
❿
ll button to select the desired
1
During play, press the MARK button on the remote.
The Mark icons will be displayed.
MP3/WMA Play Function
1
Press the OK or
❿ll button, the selected music file
will be played back.
Up to 8 music folders can be displayed at a time. If
you have more than 8 folders on a disc, press the
❷
button to display them on the screen.
Total : 1/2
ROOT
ROOT
20020822094
MP3
CLEAR
2
Use the
ꢀ
,
❷
buttons to select the desired music
2
3
Use the
icon.
➛
,
❿
buttons to move to the desired Mark
folder, then press OK.
Press the buttons again to select a music
file. Press the OK button to begin playback of a
music file.
ꢀ
,❷
When you reach the scene you want to mark, press
the OK button. The icon will change to a number
(1, 2, or 3).
Total : 1/3
4
Press the MARK button to turn off the display.
ROOT
..
20020822094
MP3
A
B
C
Recalling a Marked Scene
1
2
3
During play, press the MARK button on the remote.
Use the buttons to select a marked scene.
Press the ❿ll buttons to skip to the marked scene.
➛
,
❿
Clearing a Mark
1
2
During play, press the MARK button on the remote.
Use the buttons to select the mark number
you want to delete.
➛
,
❿
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
➢
• Up to three scenes may be marked at a time.
• Depending on the disc, the mark function may not
work.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-38
MP3/WMA Play
ꢃ
Use a decompression transfer rate of at least
128Kbps when recording MP3 files.
Program/Random playback
Sound quality with MP3 files basically depends on
the rate of compression/decompression you choose.
Getting audio CD quality sound requires an
analog/digital sampling rate, that is conversion to
MP3 format, of at least 128Kbps and up to 160Kbps.
However, choosing higher rates, like 192Kbps or
more, only rarely give better sound quality.
1
Press the MODE button in STOP mode to switch
between the RANDOM and PROGRAM modes.
PROGRAM
RANDOM
Conversely, files with decompression rates below
128Kbps will not be played properly.
ꢃ
Use a decompression transfer rate of at least
64Kbps when recording WMA files.
Sound quality with WMA files basically depends on
the rate of compression/decompression you choose.
Getting audio CD quality sound requires an
analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to 192Kbps.
Conversely, files with decompression rates below
64Kbps or over 192Kbps will not be played properly.
◆
• Press the REPEAT button in PLAY mode to hear
only music continuously and press it once again
to release.
CD-R MP3/WMA discs
ꢃ
ꢃ
Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code
protected to prevent illegal copying.
These files are of the following types: Windows
MediaTM (registered trade mark of Microsoft Inc)
and SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
When playing CD-R/MP3 or WMA discs, please
follow all the recommendations for CD-R above,
plus the comments below:
ꢃ
ꢃ
Your MP3 or WMA files should be ISO 9660 or
JOLIET format.
Important :
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and
with Apple's Mac. These two formats are the most
widely used.
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality.
You should note that certain technologies and
methods for MP3 file recording on CD-Rs prevent
optimal playback of these files on your DVD player
(degraded sound quality and in some cases,
inability of the player to read the files).
When naming your MP3 or WMA files do not
exceed 8 characters, and place ".mp3, .wma" as
the file extension.
General name format of: Title.mp3. or Title.wma.
When composing your title, make sure that you use
8 characters or less, have no spaces in the name,
and avoid the use of special characters including:
(.,/,\,=,+).
ꢃ
This unit can play a maximum of 500 files and 300
folders per disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-39
Program Play & Random Play
Picture CD Playback
1
2
Open the disc tray.
Program Play (CD/MP3/WMA)
Load the disc on the tray.
1
2
Press the MODE button.
Use the buttons to select PROGRAM.
Press the OK button.
Load the disc with the labeled side up.
➛
,
❿
3
Close the tray.
- The tray closes and you should get a screen that
looks like the one below.
• Use the
ꢀ
,
❷
buttons on the remote controller to
PROGRAM
RANDOM
select the picture you want to view and then press
the OK button.
• To see the next 6 pictures, press the ❿❿
l
button.
• To see the previous 6 pictures, press the ➛➛ button.
l
•
•
:
:
Return to the Album Screen.
3
Use the
track to add to the program.
Press the OK button. The selection numbers appear
in the Program Order box.
ꢀ
,
❷ꢁ
/
➛
,
❿
buttons to select the first
Each time the OK button is pressed, the
picture rotates 90 degrees clockwise.
•
:
Each time the OK button is pressed, the
picture is enlarged up to 4X.
(Normal
ꢁ
2X
ꢁ
4Xꢁ Normal)
PROGRRAM 01
Track
Program order
•
:
The unit enters slide show mode.
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
* Press the RETURN button to return to the album screen.
* Before the Slide Show can begin, the picture interval
must be set.
CLEAR
•
:
When this icon is selected and OK is
pressed, the pictures change automatically
with about an 6 second interval.
4
Press the
button.
II
❿
The disc will be played in programmed order.
•
•
:
:
The pictures change automatically with about
an 12 second interval.
The pictures change automatically with about
an 18 second interval.
Random Play (CD/MP3/WMA)
* Depending on the file size, each interval between
images may take longer or shorter than the manual
suggests.
1
2
Press the MODE button.
Use the buttons to select RANDOM.
Press the OK button.
➛
,
❿
The disc will be played in random order.
PROGRAM
RANDOM
◆
• Depending on the disc, the Program and Random
Play functions may not work.
• To resume normal play, press the CLEAR button.
• This unit can support a maximum of 99
programmed order.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-40
Picture CD Playback
CD-R JPEG Discs
Total : 1/3
ROOT
ROOT
20020822094
MP3
• Only files with the ".jpg" and ".JPG" extensions can be
played.
JPEG
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
Album
Photo : 1 /215
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
• A maximum of 500 images can be stored on a single
CD.
Photo : 1 /215
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take
longer to start playing or may not play at all.
• If a number of files in 1 Disc is over 500, only 500
JPEG file can be played.
Timer :
• If a number of folders in 1 Disc is over 300, only
JPEG files in 300 folders can be played.
◆
• If no buttons on the remote control are pressed for
10 seconds, the menu will disappear.
Press the DISC MENU button on the remote
control to display the menu again.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-41
DivX/XviD/MPEG4 Special Playback Features
4
Stop/Resume
• Press the
To resume the DivX/XviD/MPEG4 from the point
where the disc stopped, press the ll button.
During DivX/XviD/MPEG4 playback you can select
from the following special playback options. To resume
ꢃ
button once to stop playback.
normal playback, press the
❿ll button.
❿
1
Still
5
Zoom
During play, press the MENU button on the remote.
Press the
playback.
❿ll button on the remote control during
Then press the corresponding
select the FUNC option.
ꢀ,❷
buttons to
• The picture will still and the audio will mute.
• To resume playback, press the ll button.
❿
• If the player is left in Still mode for 5 minutes, it
will stop automatically.
◆
Auto Scaling :
CIF(100kbps)~D1(784kbps) resolution.
If the file resolution is small, it scales up to 2 times
automatically. So you can see the more larger
screen.
2
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one frame
at a time.
• Audio is muted during Frame Advance mode.
• Press
❿ll to resume normal playback.
NOTE: Frame Advance operates only in the forward
direction.
3
Slow Motion
During playback, press the
❿ll button to Slow the
image. Then use the Search ❿❿ to play in slow
motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-42
DivX/XviD/MPEG4 Playback
1
When the disc is inserted, the file structure of the
disc will be shown. Depending on the file format, a
DivX/XviD/MPEG4 Feature Table
different icon will appear next to each file. The
,
, and
Use
OK or
files will have been highlighted.
to select the movie file, and then press
MPEG4 Supported
ꢀ
,
❷
Avi files are used to contain the audio and video data;
these must be stored on CD in the ISO 9660 format.
.
II
❿
Result : When the 'Reading Index......' message is
displayed, wait for a second or two. The
movie will be played back.
SPEC
VIDEO Compatibility DivX 3.11 upper Up to the latest VERSION
XviD
Total : 1/3
ROOT
ROOT
D CD1
WMV(?)
MP3
AC3
WMV V1/V2/V3/V7
CBR : 80kbps~320kbps
CBR : 128kbps~448kbps
DivX
DivX
DivX
AUDIO Compatability
D CD2
D CD3
AAC(?)
WMA
CBR : 56kbps~160kbps
MPEGs containing DivX can be divided into Video
and Audio.
If the "Codec. Not Supported" message is displayed, the
selected file cannot be played back.
•
Video compatibility : All versions of DivX later than
3.11 (including the latest 5.1)
are supported. In addition,
1
To navigate to a specific time while viewing the
movie, press the INFO. key.
XviD is supported. For WMV,
V1, V2, V3, and V7 formats
are possible.
The file format of the current file (
,
, or
)
and time information will be displayed.
•
•
Audio compatibility : MP3s encoded at bitrates from
80kbps to 320kbps, AC3s from
128kbps to 448kbps, and
2
Use the numeric keys on the remote control to enter
the time to jump to that time in the movie.
WMAs from 56kbps to
160kbps are supported.
DivX
In addition, for subtitles, Samsung will support Text
format (SMI).
ENG 5.1CH
ENG
~
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-43
Technical Specifications
Rated voltage
Power consumption
Weight
AC 220 - 240V~, 50Hz
19Watts
3.9Kg
General
Size
430mm X 282mm X 82mm
+5°C ~ +35°C
Operating ambient temperature
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
Euro Scart socket : 1.0Vp-p (unbalanced) 75Ω
Euro Scart socket : -8dBm, 47Kohm unbalanced
UHF 21-69 (Initial CH36)
RCA jack, Euro Scart socket
Digital audio out (OPTICAL, COAXIAL), RCA jack
RCA jack, Euro Scart socket
S-Video out
Video input (Rear)
Audio input (Rear)
RF out
Input
Audio (DVD, VCR)
Audio (DVD only)
Video (DVD, VCR)
Video (DVD only)
Output
RGB out : Euro Scart socket
VHS type video tape
Tape format
Colour system
Tuning system
Video S/N
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
B/G, D/K
VCR
Above 43dB (standard recording)
Above 240 lines (standard recording)
Above 68dB (Hi-Fi), 39dB (Mono)
20Hz - 20KHz (Hi-Fi)
Resolution
Audio S/N
Audio frequency characteristics
Disc
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
95dB
DVD
Audio S/N
Audio dynamic range
105dB
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-44
Problems and Solutions (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
Problem
Explanation/Solution
No power
◆ Check that the power plug is connected to a wall outlet.
◆ Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆ A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded ◆ Check the DVD-VCR aerial connections.
◆ Is the DVD-VCR tuner properly set?
◆ Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆ Was the STANDBY/ON button pressed to activate the timer?
◆ Re-check the recording start/stop time settings.
◆ If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
No playback picture or the picture
is distorted
◆ Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
◆ Check the TUNER/EXTERNAL setting. It should be on TUNER.
◆ Check the TV/VCR aerial connections.
Noise bars or streaks on playback
◆ Press the TRK ( or
) buttons to minimize this effect.
When the ❿ button is pressed
during playback, the still picture
has severe “noise bars” streaks
◆ A still picture may have “noise bars”, depending on the
II
condition of the tape. Press the TRK ( or
during SLOW motion to minimize this effect.
) buttons
Video Head Cleaning
◆ If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the DVD-VCR
TV does not find the Screen
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
or the pattern when found suffers
from interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
2. Carry out the instructions “Tuning Your Television for the
DVD-VCR” (see page 8).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 12), move the channel number
several channels down from the original setting.
(example: from 36 to 39).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 8).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you are unable to solve the problem after reading the above instructions, note:
◆
◆
◆
The model and serial number on the rear of your DVD-VCR
The warranty information
A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-45
Troubleshooting Guide (DVD)
Before requesting service (troubleshooting)
Problem
Action
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD,
a CD.
Disc does not play.
P4
◆
5.1 channel sound is reproduced only when the following conditions
are met. :
P28
P30
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
5.1 channel sound is not
being reproduced.
◆
◆
◆
Check if your audio system is connected and working properly.
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
P29-41
P28-31
The
icon appears on
screen.
◆
◆
◆
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
Playback mode differs from
the Setup Menu selection.
The screen ratio cannot be
changed.
The Screen Ratio is fixed on your DVDs.
P31
P30
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
No audio.
◆
Press STANDBY/ON from a cold start with no disc in the unit.
Press the ➛➛ and ❿❿ buttons simultaneously on the front panel for
five seconds. Switch off and on the DVD-VCR by pressing
STANDBY/ON button. The Parental Mode is now unlocked as
indicated on the display. You can now set your rating level and
change your password to a new number.
P32
Forgot password
◆
◆
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
If you experience other
problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENG-46
ELLAS
(GREECE)
Agaphte pelath,
Saı eucaristoume gia thn empistosunh pou
deixate sthn
Kefaleı binteokameraı
Gennhtrieı aktinwn Iaser sta CD, DVD
Thleceiristhria
Lucnieı fournwn mikrokumatwn
Prosarmogeı, metatropeı h ruqmiseiı,
anexarthta an einai epituchı h
anepituchı, oute opoiadhpote zhmia
proercetai ex autou...
*
*
*
*
*
SAMSUNG me thn agora
authı thı suskeuhı.
To proion auto thı SAMSUNG einai
egguhmeno gia periodo dwdeka (12) mhnwn apo
thn hmeromhnia agoraı tou gia antallaktika
kai ergatika. Sthn periptwsh pou qa creiastei
episkeuh, to proion auto thı SAMSUNG qa
prepei na stalei h na metaferqei sto
exousiodothmeno service, me exoda tou
agorasth.
Exousiodothmenoi antiproswpoi kai
exousiodothmena kentra service se alleı
Eurwpaikeı cwreı, qa apodecqoun touı orouı
thı egguhshı.
5. H egguhsh auth den kaluptei kamia apo tiı
parakatw periptwseiıÚ
Periodikouı elegcouı, sunthrhsh kai
episkeuh h antikatastash merwn pou
ofeilontai se fusiologikh fqora
Ta exoda kai touı kindunouı metaforaı
pou scetizontai me thn egguhsh autou
*
*
tou proiontoı
Plhroforieı gia ta exousiodothmena kentra
service sthn Ellada, mporeite na parete apo
thn
Zhmia se auto to proion pou proercetai
apoÚ
A. Katacrhsh h kai kakh crhsh,
sumperilambanomenhı alla kai mh
periorismenhı seÚ
*
FOURLIS TRADE A.E.B.E.
L. Kruoneriou 112
Mh crhsh autou tou proiontoı gia
touı skopouı pou fusiologika
proorizetai h sumfwna me tiı odhgieı
crhsewı gia thn swsth crhsh kai
sunthrhsh autou tou proiontoı
Thn egkatastash kai crhsh tou
proiontoı me tropouı pou antikeintai
stiı tecnikeı prodiagrafeı
145 68 Kruoneri, Apikhı
Thl. 210.629.3100
◆ Oroi thı egguhshı
1. H egguhsh iscuei ean kai mono ean to proion
creiazetai service kai h karta egguhshı
ecei plhrwı sumplhrwqei kai sfragisqei
apo to katasthma agoraı. Epishı prepei na
proskomisqei kai to timologio h h apodeixh
lianikhı pwlhshı, panw sthn opoia o
seiriakoı ariqmoı tou proiontoı prepei na
einai eukrinhı.
asfaleiaı pou iscuoun kata thn
crhsh tou proiontoı
B. Episkeuh pou egine apo mh
exousiodothmena sunergeia service
G. Atuchmata, qeomhnieı h opoiadhpote
aitia pera tou elegcou thı
SAMSUNG, sumperilambanomenwn
alla mh periorismenwn twn keraunwn,
tou nerou, thı fwtiaı, twn dhmosiwn
anataracwn, tou kakou aerismou klp.
D. H egguhsh auth den ephreazei ta
dikaiwmata tou katanalwth pou
problepontai apo thn efarmostea
eqnikh nomoqesia pou iscuei, oute ta
dikaiwmata twn katanalwtwn
2. H upocrewsh thı SAMSUNG afora mono
thn episkeuh tou proiontoı
3. H episkeuh tou proiontoı prepei na
anatiqetai mono se exousiodothmena kentra
service h exousiodothmenouı antiproswpouı
thı SAMSUNG. Kamia apozhmiwsh den qa
ginei apodekth gia episkeuh pou ecei ginei
apo mh exousiodothmeno apo thn SAMSUNG
sunergeio.
4. To proion auto den qa qewrhqei
ellatwmatiko sta ulika h sthn ergasia
episkeuhı ean qa prepei na prosarmostei,
metatrapei h ruqmistei wste na summor-
fwqei me tiı topikeı tecnikeı prodiagrafeı
h prodiagrafeı pou iscuoun se cwra allh
apo auth gia thn opoia proorizotan h
kataskeuasthke.
enantion twn lianopwlhtwn pou
aporreoun apo thn sumbash pwlhshı.
E. Se periptwsh pou den uparcei eqnikh
nomoqesia auth h egguhsh qa einai h
monadikh kai apokleistikh kaluyh tou
katanalwth gia kaqe zhmia.
H egguhsh auth den kaluptei apozhmiwseiı
giaÚ
FOURLIS TRADE A.E.B.E.
Kefaleı binteo kai kasetofwnwn
*
Download from Www.Somanuals.com. All Manuals Search And Download.
|