Install drivers
Install programs
SyncMaster 204BM
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not use a damaged or loose plug.
This may cause electric shock or fire.
z
Do not pull the plug out by the wire nor touch the plug with wet hands.
This may cause electric shock or fire.
z
Use only a properly grounded plug and receptacle.
z
An improper ground may cause electric shock or equipment damage.
(Class l Equipment only.)
Insert the power plug firmly so that it does not come loose.
A bad connection may cause fire.
z
Do not excessively bend the plug and wire nor place heavy objects upon
them, which could cause damage.
z
This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet.
This may cause fire.
z
Do not disconnect the power cord while using the monitor.
A surge may be caused by the separation and may damage the monitor.
z
Do not use the power cord when the connector or plug is dusty.
z
z
If the connector or plug of the power cord is dusty, clean it with a dry
cloth.
Using the power cord with a dusty plug or connector may cause electric
shock or fire.
To disconnect the apparatus from the mains, the plug must be pulled out
from the mains socket, therefore the mains plug shall be readily
operable.
Download from Www.Somanuals.com. All Manuals Search And Download.
z
This may cause electric shock or fire.
Installation
Be sure to contact an authorized Service Center, when installing your monitor in
a location with heavy dust, high or low temperatures, high humidity, and exposed
to chemical substances and where it operates for 24 hours such as at airports,
train stations etc.
Failure to do so may cause serious damage to your monitor.
Place your monitor in a location with low humidity and a minimum of
dust.
z
Failure to do so may cause electric shock or fire inside the monitor.
Do not drop the monitor when moving it.
This may cause damage to the product or the person carrying it.
z
Install the monitor base in a showcase or shelf so that the end of the
base does not protrude from the showcase or shelf.
z
Dropping the product may cause damage to the product or the person
carrying it.
Do not place the product on an unstable or small surface area.
z
Place the product on an even and stable surface, as the product may fall
and cause harm to someone walking by, specifically children.
Do not place the product on the floor.
Take care, as someone, specifically children may trip over it.
z
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
z
Otherwise, this may cause fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep any heating devices away from the power cable.
A melted coating may cause electric shock or fire.
z
Do not install the product in places with poor ventilation, for instance, a
bookshelf, closet, etc.
z
Any increase in the internal temperature may cause fire.
Put down the monitor carefully.
Failing to do so may damage the monitor.
z
Do not place the monitor face down.
This may damage the TFT-LCD surface.
z
The installation of the bracket must be done by a qualified professional.
z
z
Installing the bracket by unqualified personnel may result in injury.
Always use the mounting device specified in the owner's manual.
When installing the product, make sure to keep it away from the wall
(more than 10 cm/4 inches ) for ventilation purposes.
z
Poor ventilation may cause an increase in the internal temperature of the
product, resulting in a shortened component life and degraded
performance.
Keep the plastic packaging (bag) out of children's reach.
z
The plastic packaging (bag) may cause suffocation if children play with
it.
Clean
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with
Download from Www.Somanuals.com. All Manuals Search And Download.
a slightly moistened, soft fabric.
Do not spray water or detergent directly onto the monitor.
z
This may cause damage, electric shock or fire.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it
properly using a dry cloth.
z
A dirty connector may cause electric shock or fire.
Make sure to unplug the power cord before cleaning the product.
Otherwise, this may cause electric shock or fire.
z
Unplug the power cord from the power outlet and wipe the product using
a soft, dry cloth.
z
Do not use any chemicals such as wax, benzene, alcohol, thinners,
insecticide, air freshener, lubricant or detergent.
Contact the SAMSUNG customer care center or Customer Center for
interior cleaning once a year.
z
Keep the product's interior clean. Dust which has accumulated in the
interior over an extended period of time may cause a malfunction or fire.
Others
Do not remove the cover (or back).
z
z
This may cause electric shock or fire.
Refer to a qualified servicing company.
If your monitor does not operate normally - in particular, if there is any
Download from Www.Somanuals.com. All Manuals Search And Download.
unusual sound or smell coming from the monitor - unplug it immediately
and contact an authorized dealer or the Service Center.
z
This may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture;
do not install inside a vehicle.
z
z
This may cause a malfunction, electric shock or fire.
In particular, avoid operating the monitor near water or outdoors where
the monitor could be exposed to snow or rain.
If the monitor is dropped or the casing is damaged, turn the monitor off
and unplug the power cord. Then contact the Service Center .
z
The monitor may malfunction, causing electric shock or fire.
Disconnect the plug from the outlet during storms or lightning or if it is
not used for a long period of time.
z
Failure to do so may cause electric shock or fire.
Do not try to move the monitor by pulling only the wire or the signal
cable.
z
This may cause a breakdown, electric shock or fire due to damage to
the cable.
Do not move the monitor right or left by pulling only the wire or the
signal cable.
z
This may cause a breakdown, electric shock or fire due to damage to
the cable.
Do not cover the vents on the monitor cabinet.
Bad ventilation may cause a breakdown or fire.
z
Do not place water containers, chemical products or small metal objects
on the monitor.
z
z
This may cause malfunction, electric shock or fire.
If a foreign substance enters the monitor, unplug the power cord and
contact the Service Center.
Keep the product away from combustible chemical sprays or
inflammable substances.
z
This may cause an explosion or fire.
Download from Www.Somanuals.com. All Manuals Search And Download.
Never insert anything metallic into the monitor openings.
This may cause electric shock, fire or injury.
z
Do not insert metal objects such as chopsticks, wire and tools or
inflammable objects such as paper or matches into the vent, headphone
port or AV ports or etc.
z
This may cause electric shock or fire. If an alien substances or water
enters the product, turn the product off, unplug the power connector
from the wall outlet and contact the Service Center.
When viewing a fixed screen for an extended period of time, residual
image or blurriness may appear.
z
Change the mode to energy saving mode or set a screensaver to a
changing picture when away from the monitor for an extended period of
time.
Adjust the resolution and frequency to the level appropriate for the
model.
z
An inappropriate resolution may cause undesirable picture quality.
20 inch (51 cm) 1600 X 1200
Keep the volume at a comfortable level when using the headphones.
Excessively loud volume level may damage hearing.
z
Viewing the monitor continuously at a too close angle may result in
damage to your eyesight.
To ease eye strain, take at least a five-minute break after every hour of
.
using the monitor
Do not install the product on an unstable, uneven surface or a location
prone to vibrations.
z
Dropping the product may cause damage to the product or the person
carrying it. Using the product in a location prone to vibrations may
shorten the lifetime of the product or may cause the product to catch fire.
When moving the monitor, turn off and unplug the power cord.
Make sure that all cables, including the antenna cable and cables
Download from Www.Somanuals.com. All Manuals Search And Download.
connected to other devices, are disconnected before moving the
monitor.
z
Failure to disconnect cables may damage it and cause fire or electric
shock.
Place the product out of children's reach, as they could damage by
hanging onto it.
z
A falling product may cause injury to the person or even fatality.
When not using the product for an extended period of time, keep the
product unplugged.
z
Otherwise, this may cause heat emission from the accumulated dirt or
degraded insulation, causing electric shock or fire.
Do not place your children's favorite toys or any other objects of interest
on the product.
z
Children may try to climb on the product to retrieve an object. The
product could fall, causing injury or even fatality.
When lifting up or moving the monitor, do not lift the monitor upside
down while holding only the stand.
z
This may cause your monitor to fall, and become damaged or cause
personal injury.
Good Postures When Using the Monitor
Try to maintain a good posture when using the monitor.
z
z
Keep your back straight.
Keep a distance of about 45 ~ 50 cm between your eyes and
the monitor screen. Look at the screen from slightly above it,
and have the monitor directly in front of you.
z
z
Tilt the monitor upwards by 10 ~20 degrees. Adjust the monitor
height so that the top of the monitor is slightly below eye level.
Adjust the monitor angle so that there is no reflected light on
the screen.Try to maintain your arms perpendicular to your
armpits.
z
z
z
Keep your arms level with the back of your hands.
Keep the angle of the elbow perpendicular.
Keep the angle of the knees at more than 90 degree. Do not let
your feet fall up from the floor. Adjust the arm position so that it
is below the heart.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
Without Stand
Monitor
With Stand
HAS Stand
Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
User's Guide, Monitor Driver,
Natural Color, MagicTune™,
MagicRotation software
Warranty Card
(Not available in all locations)
Quick Setup Guide
Cable
D-Sub Cable
Power Cord
Audio Cable
Sold separately
DVI Cable
Set-Bracket
Screws (4 EA)
Front
Download from Www.Somanuals.com. All Manuals Search And Download.
Opens the OSD menu. Also use to exit the OSD menu or return
to the previous menu.
MENU button [ ]
MagicBright is a new feature providing optimum viewing
environment depending on the contents of the image you are
watching. Currently seven different modes are available:
Custom, Text, Internet, Game, Sport and Movie, Dynamic
Contrast. Each mode has its own pre-configured brightness
value. You can easily select one of seven settings by simply
pressing MagicBright control button.
MagicBright button
[
]
1) Custom
Although the values are carefully chosen by our engineers,
the pre-configured values may not be comfortable for your
eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using
the OSD menu.
2) Text
For documentations or work involving a lot of text.
3) Internet
For working with a mixture of images such as text and
graphics.
4) Game
For watching motion pictures such as a game.
5) Sport
For watching motion pictures such as a sport.
6) Movie
For watching motion pictures such as a DVD or Video CD.
7) Dynamic Contrast
Dynamic Contrast is to automatically detect distribution of
inputted visual signal and adjust to create optimum contrast.
>>Click here to see an animation clip
When OSD is not on the screen, push the button to adjust
volume.
Volume button[ ]
Adjust buttons
Adjust items in the menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
Activates a highlighted menu item. /
Enter button [ ] /
Source button
Push the ' ', then selects the video signal while the OSD is off.
(When the source button is pressed to change the input mode, a
message appears in the upper left of the screen displaying the
current mode -- Analog or Digital input signal.)
Note : If you select the Digital mode, you must connect your
monitor to the graphic card's DVI port using the DVI cable.
When the 'AUTO' button is pressed, the Auto Adjustment screen
appears as shown in the animated screen on the center. Auto
adjustment allows the monitor to self-adjust to the incoming
Analog signal. The values of fine, coarse and position are
adjusted automatically. (Available in Analog mode only)
>>Click here to see an animation clip
AUTO button
Use this button for turn the monitor on and off. /
This light glows Blue during normal operation, and blinks Blue
once as the monitor saves your adjustments.
Power button [ ] /
Power indicator
Headphone
connection terminal [
]
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
HAS Stand
:
1. POWER ON/OFF Switch
Use this button for turn the monitor on and off
: Power cord, plugs into monitor and wall
2. POWER port
receptacle.
Download from Www.Somanuals.com. All Manuals Search And Download.
: Connect the DVI Cable to the DVI IN port on the
DVI IN port
back of your monitor. (SOURCE: Digital)
:Connect the signal cable to the RGB IN port on
RGB IN port
the back of your monitor. (SOURCE: Analog)
: The Kensington lock is a device used to
Kensington Lock
physically fix the system to something when using it in a public
place. (The locking device has to be purchased separately.)
For using a locking device, contact the place of purchase.
: Remove the fixing pin on the stand to lift the
Stand Stopper
monitor up and down.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Fix Ring:
When connecting the cable is finished
fix the cables to the Cable Fix Ring.
AUDIO IN:
Connect the audio cable for your monitor to the audio port on
the back of your computer.
See Connecting the Monitor for further information regarding cable connections.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Monitor
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[ RGB IN ]
Using the DVI (Digital) connector on the video card.
Connect the DVI Cable to the DVI IN port on the back of your monitor.
[ DVI IN ]
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the D-sub connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
Cable Fix Ring
When connecting the cable is finished fix the cables to the
Cable Fix Ring.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Stand
Removing the base
HAS Stand
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove screws
and then remove the Stand from the LCD monitor.
(A)
Swivel stand
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ( ),You can swivel the monitor left and right at an angle of 350° to set the
monitor lengthwise. The rubber under the stand is to avoid the monitor slide.
When you try to rotate the monitor in the state of the power cord or cable
connecting to the monitor, the power cord of cable can be destroyed.
Tilt angle
Using ( ), You can adjust the tilt anlgle within a range of -5°(±1.0) forward to 17°
(±1.0) backward for the most comfortable viewing angle.
Pivot Stand / HAS Stand
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand Stopper
A.
The Auto Rotation may not be supported depend on the monitor model.
If you rotate the screen without lifting it to its maximum height, the screen may be
damaged because the edge of the screen would hit the floor.
Attaching a Base
This monitor accepts a 100 mm x 100 mmVESA-compliant mounting interface pad.
HAS Stand
Monitor
A.
B.
Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove screws and then remove the Stand from the LCD monitor.
4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it
with four screws that came with the arm-type base, wall mount hanger or other base.
z
Do not use screws longer than the standard dimension, as they may damage the inside
Download from Www.Somanuals.com. All Manuals Search And Download.
of the Monitor.
z
z
For wall mounts that do not comply with VESA standard screw specifications, the length
of the screws may differ depending on their specifications.
Do not use screws that do not comply with the VESA standard screw specifications.
Do not fasten the screws too tightly, as this may damage the product or cause the
product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
z
Samsung is not liable for product damage or personal injury when a non-VESA or non-
specified wall mount is used or the consumer fails to follow the product installation
instructions.
z
z
To mount the monitor on a wall, you should purchase the wall mounting kit that allows
you to mount the monitor at least 10 cm away from the wall surface.
Contact the nearest Samsung Service Center for more information. Samsung
Electronics will not be responsible for damages caused by using a base other than
those specified.
z
Please use Wall Mount according to the International standards.
Installing the Monitor Driver (Automatic)
When prompted by the operating system for the monitor driver, insert the CD-ROM
included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
here.
z
Internet web site :
http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
1. Insert CD into the CD-ROM drive.
2. Click
"Windows"
3. Choose your monitor model in the model list, then click the
button.
"OK"
4. If you can see following message window, then click the
button.
"Continue Anyway"
®
®
Then click
button. (Microsoft Windows XP Operating System)
"OK"
Download from Www.Somanuals.com. All Manuals Search And Download.
This monitor driver is under certifying MS logo,and this installation don't
damage your system.The certified driver will be posted on Samsung
Monitor homepage
5. Monitor driver installation is completed.
Installing the Monitor Driver (Manual)
Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux
When prompted by the operating system for the monitor driver, insert the CD-ROM
included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
below.
z
Internet web site :
http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
®
Microsoft Windows Vista™ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2. Click (Start) and "
". Then, double-click on "
Appearance and
Control Panel
".
Personalization
3.
Click "
" and then "
Personalization
".
Display Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click "
".
Advanced Settings…
5. Click "
" in the "
" tab. If the "
" button is deactivated, it
Properties
Properties
Monitor
means the configuration for your monitor is completed. The monitor can be used as is.
If the message “ ” is displayed, as shown in the figure below,
Windows needs…
".
click "
Continue
This monitor driver is under certifying MS logo, and this installation doesn't
damage your system.
The certified driver will be posted on Samsung Monitor homepage
6. Click "
" in the "
Update Driver…
" tab.
Driver
7.
Check the "
" checkbox and click "
Let me
Browse my computer for driver software
".
pick from a list of device drivers on my computer
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click "
" and select the folder (for example, D:\Drive) where the driver setup
Have Disk…
file is located, and click " ".
OK
9. Select the model that matches your monitor from the list of monitor models on the
screen, and click "
".
Next
10.
Click "
Close
sequence.
"→ "
" → " " → " " on the following screens displayed in
OK OK
Close
Download from Www.Somanuals.com. All Manuals Search And Download.
®
®
Microsoft Windows XP Operating System
1. Insert CD into the CD-ROM driver.
2. Click "
" —> "
" then click the "
" Icon.
Appearance and Themes
Start
Control Panel
3. Click "
" icon and choose the "
" tab then click "
".
Advanced..
Display
Settings
4. Click the "
" button on the "
" tab and select "
" tab.
Driver
Properties
Monitor
5. Click "
" and select "
" then click " " button.
Next
Update Driver..
Install from a list or..
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select "
" then click "
Don't search ,I will..
" and then click "
".
Have disk
Next
7. Click the "
" button then choose A:(D:\Driver) and choose your monitor model in the
Browse
model list and click the "
" button.
Next
8. If you can see following "
" window, then click the "
" button. Then
Continue Anyway
Message
click "
" button.
OK
This monitor driver is under certified MS logo,and this installation doesn't damage your
system.The certified driver will be posted on Samsung Monitor homepage.
9. Click the "
" button then click "
" button continually.
OK
Close
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Monitor driver installation is completed.
®
®
Microsoft Windows 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose " " button on the "
OK
" window.
Insert disk
2. Click the "
" button on the "
" window.
Browse
File Needed
3. Choose A:(D:\Driver) then click the "Open" button and then click " " button.
OK
How to install
1. Click "
" , "
Setting
" , " ".
Control Panel
Start
2. Double click the "
" Icon.
Display
3. Choose the "
" tab and then click "
".
Advanced..
Settings
".
4. Choose "
Monitor
Case1:If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2:If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
5. Click "
6. Choose "
" and then click on "
" then click on the "Next" button.
Driver
Update Driver..
Display a list of the known drivers for this device so that I can choose a
" then click "
specific driver
" and then click "
".
Next
Have disk
7. Click the "
8. Click the "
" button then choose A:(D:\Driver).
Browse
Open
" button, then click " " button.
OK
9. Choose your monitor model and click the "
" button then click "
" button.
Next
Next
10. Click the "
" button then the "
" button.
Finish
Close
If you can see the "
Digital Signature Not Found
" window then click the "
"button.
Yes
And click the "
" button then the "
Finish
" button.
Close
®
®
Microsoft Windows Millennium Operating System
1. Click "
2. Double click "
" , "
Display
" , "
" icon.
".
Start
Setting Control Panel
3. Select the "
4. Select the "
" tab and click "
" button.
Advanced Properties
Settings
" tab.
Monitor
" button in the "
5. Click the "
" area.
Change
Monitor Type
".
6. Choose "
7. Choose "
8. Click the "
Specify the location of the driver
Display a list of all the driver in a specific location..
" button
" then click "
" button.
Next
Have Disk
9. Specify A:\(D:\driver) then click " " button.
OK
" and choose the monitor that corresponds to the one you
10. Select "
Show all devices
connected to your computer and click " ".
OK
" button and "
11. Continue choosing "
dialogue box.
" button until you close the Display Properties
Close
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
®
®
Microsoft Windows NT Operating System
1. Click
,
,
, and then double-click
icon.
Display
Start Settings Control Panel
2. In Display Registration Information window, click Settings Tab and then click
All Display
.
Modes
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click
.
OK
4. Click
button if you see the screen working normally after clicking
. If the screen is
Test
Apply
not normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at , select the level of resolution and vertical
All Display Modes
frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1. Press Enter at the first and the second screen after executing the X86Config file.
2. The third screen is for
setting your mouse
3. Set a mouse for your computer.
.
4. The next screen is for
.
selecting a keyboard
5. Set a Keyboard for your computer.
6. The next screen is for
.
setting your monitor
for your monitor. (You can enter the frequency
7. First of all, set a
directly.)
horizontal frequency
8. Set a
for your monitor. (You can enter the frequency directly.)
vertical frequency
9. Enter the
. This information will not affect the actual execution
model name of your monitor
of X-Window.
10. You have
setting up your monitor.
finished
X-Window after setting other requested hardware.
Execute
Natural Color
Natural Color
One of the recent problems in using a computer is that the color of the images printed out by a
printer or other images scanned by a scanner or a digital camera are not the same as those
shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a color administration system
developed by Samsung Electronics in association with Korea Electronics &
Telecommunications Research Institute (ETRI).
This is only available for Samsung monitors and ensures that the color of the images on the
Download from Www.Somanuals.com. All Manuals Search And Download.
monitor are the same as the printed or scanned images.
For more information, refer to Help (F1) in the software program.
Installing the Natural Color Software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural
Color screen will appear. Click on Natural Color in the startup window to install the Natural
Color software.
To install the program manually, insert the CD included with the Samsung monitor into the CD-
ROM Drive, click the Windows [Start] button, select [Run...].
Enter D:\color\NCProsetup.exe and then press the <Enter> key.
(If the drive where the CD is inserted is not D:\, enter the applicable drive.)
Uninstalling the Natural Color Software Program
Select
on the
menu and then double-click
"Start" "Add/Delete a
"Setting/Control Panel"
.
program"
Select Natural Color from the list and then click the
button.
"Add/Delete"
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
Use this button for open the on-screen menu and exits from the menu screen or closes
[
]
screen adjustment menu.
These buttons allow you to adjust items in the menu.
2. [
]
Press this button to Activates a highlighted menu item.
3. [ ]
Press this button to self-adjust to the incoming Analog signal.
4. [AUTO]
(Available in Analog mode only) The values of fine,coarse and position are adjusted
automatically.
AUTO
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
AUTO
Description
When the '
' button is pressed, the Auto Adjustment screen appears
as shown in the animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog
signal. The values of fine, coarse and position are adjusted automatically.
(Available in Analog mode only)
AUTO
To make the automatic adjustment function sharper, execute the '
function while the AUTO PATTERN is on.
'
AUTO
- If auto adjustment does not work properly, press '
adjust picture with more accuracy.
' button again to
AUTO
- If you change resolution in the control panel, auto function will be
executed automatically.
OSD Lock & Unlock
>>When pressing the AUTO button after locking the OSD
Download from Www.Somanuals.com. All Manuals Search And Download.
>>When pressing the MENU button after locking the OSD
Menu
Description
This is the function that locks the OSD in order to keep the current states of
settings or prevent others from adjusting the current settings.
: Hold down the menu button for more than five seconds to activate
Lock
the OSD adjustment lock function.
Locked
: Hold down the menu button for more than five seconds to
Unlock
deactivate the OSD adjustment lock function.
Though the OSD adjustment lock function is activated, you can still
adjust the brightness and contrast, and adjust MagicBright (
using the Direct button.
)
Download from Www.Somanuals.com. All Manuals Search And Download.
MagicBright™
Menu
Description
Push the MagicBright button to circle through available preconfigured
modes.
- Seven different modes
MagicBright™
(Custom/Text/Internet/Game/Sport/Movie/Dynamic Contrast)
Volume
Menu
Description
When OSD is not on the screen, push the button to adjust volume.
Volume
Download from Www.Somanuals.com. All Manuals Search And Download.
SOURCE
Menu
Description
Selects the video signal while the OSD is off.
SOURCE
Brightness
Contrast
Picture
Color
MagicColor
Coarse
Color Tone
Fine
Color Control
Sharpness
V-Position
Gamma
H-Position
V-Position
Image
Language
Auto Source
H-Position
Image Reset
Transparency Display Time
OSD
Color Reset
Setup
Information
Picture
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
You can use the on-screen menus to change the
brightness according to personal preference.
Brightness
[MENU →
→
→
,
→ MENU]
You can use the on-screen menus to change the contrast
according to personal preference.
Contrast
[MENU →
→
,
→
→
,
→ MENU]
Color
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Description
Play/Stop
MagicColor is a new technology that Samsung has
exclusively developed to improve digital image and to
display natural color more clearly without disturbing image
quality.
- Returns to the original mode.
1) Off
- The screen before applying MagicColor
appears on the right and the screen after applying
MagicColor appears on the left.
2) Demo
MagicColor
- Displays not only vivid natural color but also
3) Full
more realistic natural skin color with clearness.
- Displays vivid natural color with clearness.
4) Intelligent
[MENU →
,
→
→
→
,
→ MENU]
The tone of the color can be changed and one of four
modes can be selected - Cool, Normal, Warm and
Custom.
Color Tone
[MENU →
,
→
→
,
→
→
,
→ MENU]
Adjusts individual R,G,B color balance.
Color Control
[MENU →
,
→
→
,
→
→
,
→
→
,
→ MENU]
Gamma correction changes the luminance of the colors
with intermediate luminance.
z
z
z
Mode 1
Mode 2
Mode 3
Gamma
[MENU →
,
→
→
,
→
→
,
→ MENU]
Image
Menu
Description
Play/Stop
Download from Www.Somanuals.com. All Manuals Search And Download.
Removes noise such as vertical stripes. Coarse
adjustment may move the screen image area. You may
relocate it to the center using the horizontal control menu.
(Available in analog mode only)
Coarse
Fine
[MENU →
,
→
→
→
,
→ MENU]
Removes noise such as horizontal stripes. If the noise
persists even after fine tuning, repeat it after adjusting the
frequency (clock speed).
(Available in analog mode only)
[MENU →
,
→
→
,
→
→
,
→ MENU]
Changes the clearance of image.
Sharpness
H-Position
[MENU →
,
→
→
,
→
→
,
→ MENU]
Changes the horizontal position of the monitor's entire
display.
(Available in analog mode only)
[MENU →
,
→
→
,
→
→
,
→ MENU]
Changes the vertical position of the monitor's entire
display.
(Available in analog mode only)
V-Position
[MENU →
,
→
→
,
→
→
,
→ MENU]
OSD
Menu
Description
You can choose one of nine languages.
Play/Stop
Language
:The language chosen affects only the language of
Note
the OSD. It has no effect on any software running on the
Download from Www.Somanuals.com. All Manuals Search And Download.
computer.
[MENU →
,
→
→
→
,
→ MENU]
You can change the horizontal position where the OSD
menu appears on your monitor.
H-Position
[MENU →
,
→
→
,
→
→
,
→ MENU]
You can change the vertical position where the OSD menu
appears on your monitor.
V-Position
[MENU →
,
→
→
,
→
→
,
→ MENU]
Change the transparency of the background of the OSD.
Transparency
[MENU →
,
→
→
,
→
→
,
→ MENU]
The menu will be automatically turned off if no adjustments
are made for a certain time period.
You can set the amount of time the menu will wait before it
is turned off.
Display Time
[MENU →
,
→
→
,
→
→
,
→ MENU]
Setup
Menu
Description
for the monitor to automatically select
Play/Stop
Select
Auto Source
the signal source.
Auto Source
[MENU →
,
→
→
→
,
→ MENU]
Image parameters are replaced with the factory default
values.
Image Reset
Color Reset
[MENU →
,
→
→
,
→
→
,
→ MENU]
Color parameters are replaced with the factory default
values.
Download from Www.Somanuals.com. All Manuals Search And Download.
[MENU →
,
→
→
,
→
→
,
→ MENU]
Information
Menu
Description
Shows a video source, display mode on the OSD screen.
Information
[MENU →
,
→ MENU]
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicTune™ installation file.
3. Select installation Language, Click "Next".
4. When the Installation Shield Wizard window appears, click "Next."
5. Select "I agree to the terms of the license agreement" to accept the terms of use.
6. Choose a folder to install the MagicTune™ program.
7. Click "Install."
8. The "Installation Status" window appears.
9. Click "Finish."
10. When the installation is complete, the MagicTune™ executable icon appears on your desktop.
Double-click the icon to start the program.
MagicTune™ execution icon may not appear depending on specification of computer
system or monitor. If that happens, press F5 Key.
Installation Problems
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network
environment.
System Requirements
OS
z
z
z
Windows 2000
Windows XP Home Edition
Windows XP Professional
It is recommended using MagicTune™ in Windows® 2000 or
later.
Hardware
z
z
32 MB Memory above
60 MB Hard disk space above
* For more information, visit the MagicTune™ website.
Uninstall
The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows® Control Panel.
Perform the following steps remove MagicTune™ .
1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on
Windows® XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add or Remove Programs" icon in Control Panel.
3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune™ ." Click on it to highlight
it.
4. Click the "Change/Remove" button to remove the program.
5. Click "Yes" to begin the uninstall process.
6. Wait until the "Uninstall Complete" dialog box appears.
Visit the MagicTune™ website for technical support for MagicTune™ , FAQs (questions and answers) and
software upgrades.
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
1. Insert the installation CD into the CD-ROM drive.
2. Click the MagicRotation installation file.
3. Select installation Language, Click "Next".
4. When the InstallShield Wizard window appears, click "Next."
5. Select "I accept the terms of the license agreement" to accept the terms of use.
6. Choose a folder to install the MagicRotation program.
7. Click "Install."
8. The "Setup Status" window appears.
9. Click "Finish."
Have to reboot the system in order for the MagicRotation to work properly.
10. When the installation is complete, the MagicRotation executable icon appears on your
desktop.
Installation Problems
The installation of MagicRotation can be affected by the factors such as video card,
motherboard and the network environment.
Limitation
1. The "Display Driver" should be properly loaded for the MagicRotation to work properly.
The installed "Display Driver" should be the latest driver supplied by the vendor.
2. If some applications like Windows Media Player, Real Player, etc. are not displaying
movie files properly in 90, 180 and 270 orientations then do the following :
{ Close the application.
{ Select the Orientation (90, 180, 270) you want to view the application.
{ Relaunch the application.
In most cases this should fix the problem.
3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the
orientation mode selected (90, 180, 270).
e.g. 3D games
4. DOS based applications in Full Screen Mode will not function as per the orientation mode
selected (90, 180, 270).
5. Dual is not supported in Windows® 98, ME, NT 4.0.
6. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).
7. If you are changing your Graphic Card it is recommended that you uninstall the
MagicRotation Software before doing so.
System Requirements
OS
z
z
Windows 98 SE
Windows Me
Download from Www.Somanuals.com. All Manuals Search And Download.
z
z
z
z
Windows NT 4.0
Windows 2000
Windows XP Home Edition
Windows XP Professional
Hardware
z
z
128MB Memory above(recommended)
25MB Free Hard disk space above
Service Packs
z
z
It is recommended that your System has the latest Service Pack installed.
For Windows® NT 4.0, it is recommended to install Internet Explorer 5.0 and above with
Active Desktop component.
* For more information, visit the MagicRotation website.
* Windows® is registered trademark of Microsoft Corporation,Inc.
Uninstall
The MagicRotation program can be removed only by using the "Add/Remove Programs" option
of the Windows Control Panel.
Perform the following steps to remove MagicRotation.
1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu.
If the program runs on Windows® XP, go to [Control Panel] in the [Start] menu.
2. Click the "Add/Remove Programs" icon in Control Panel.
3. In the "Add/Remove Programs" screen, scroll down to find "MagicRotation"
Click on it to highlight it.
4. Click the "Change/Remove" button to remove the program.
5. Click "Yes" to begin the uninstall process.
6. Wait until the "Uninstall Complete" dialog box appears.
7. After uninstall restart the system to complete the uninstallation.
Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and
answers) and software upgrades.
* Windows® is registered trademark of Microsoft Corporation,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the
Information section or contact your dealer.
Symptom
Check List
Solutions
No images on
the screen. I
cannot turn on
the monitor.
Is the power cord
connected properly?
Check the power cord connection
and supply.
Can you see
Signal Cable"
screen?
"Check
on the
(When connecting D-Sub cable)
Check the signal cable connection.
(When connecting DVI cable)
If you still see an error message on
the screen when the monitor is
connected properly, check to see if
the monitor status is set to analog.
Press
button to
(Enter/Source)
have the monitor double-check the
input signal source.
If the power is on, reboot
the computer to see the
initial screen(the login
screen), which can be
seen.
If the initial screen (the login screen)
appears, boot the computer in the
applicable mode (the safe mode for
Windows ME/XP/2000) and then
change the frequency of the video
card.
(Refer to the Preset Timing Modes)
Note: If the initial screen (the login
screen) does not appear, contact
the Service Center or your dealer.
Can you see
Optimum
Mode","Recommended
Mode 1600 X 1200 60
You can see this message when the
signal from the video card exceeds
the maximum resolution and
frequency that the monitor can
handle properly.
"Not
on the screen?
Hz"
Adjust the maximum resolution and
frequency that the monitor can
handle properly.
If the display exceeds SXGA or 60
Hz, a
"Not Optimum
Mode","Recommended Mode
message is
1600 X 1200 60 Hz "
displayed. If the display exceeds 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Hz,, the display will work properly
but the
"Not Optimum
Mode","Recommended Mode
message
1600 X 1200 60 Hz"
appears for one minute and then
disappears.
Please change to the recommended
mode during this one-minute period.
(The message is displayed again if
the system is rebooted.)
There is no image on the
screen.
The monitor is in PowerSaver mode.
Is the power indicator on
the monitor blinking at 1
second intervals?
press a key on the keyboard to
activate the monitor and restore the
image on the screen.
If there is still no image, press the '
' button.
(Enter/Source)
Then press any key on the keyboard
again to activate the monitor and
restore the image on the screen.
Is the monitor connected
using the DVI cable?
You may get a blank screen if you
boot the system before you connect
the DVI cable, or disconnect and
then reconnect the DVI cable while
the system is running as certain
types of graphic cards do not send
out video signals.
Connect the DVI cable and then
reboot the system.
I cannot see
the On Screen Screen Display (OSD)
Display.
Have you locked the On
Unlock the OSD by pressing the [
least 5 seconds.
] button for at
Menu to prevent changes?
The screen
Is the screen displaying
Check the signal cable connection.
shows strange only one color as if looking Make sure the video card is fully
colors or just
black and
white.
at the screen through a
cellophane paper?
inserted in it's slot.
Have the screen colors
become strange after
running a program or due
to a crash between
applications?
Reboot the computer.
Has the video card been
set properly?
Set the video card by referring to the
video card manual.
The screen
suddenly has
become
Have you changed the
video card or the driver?
Adjust screen image position and
size using the OSD.
Have you adjusted the
resolution or frequency to
the monitor?
Adjust the resolution and frequency
at the video card.
(Refer to the Preset Timing Modes).
unbalanced.
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
The screen is
out of focus or
Have you adjusted the
resolution or frequency on of the video card.
Adjust the resolution and frequency
OSD cannot be the monitor?
(Refer to the Preset Timing Modes).
adjusted.
LED is blinking Is the frequency properly
Adjust the frequency properly by
referring to the video card manual
and the Preset Timing Modes.
but no images
on the screen.
adjusted when checking
the Display Timing on the
menu?
(The maximum frequency per
resolution may differ from product to
product.)
Download from Www.Somanuals.com. All Manuals Search And Download.
There are only Have the Windows colors
Windows ME/2000/XP:
16 colors
been set properly?
Set the colors properly at the
shown on the
screen.
→
→
Control Panel
Display
.
Settings
The screen
colors have
changed after
changing the
video card.
Has the video card been
set properly?
Set the video card by referring to the
video card manual.
There is a
message that
reads
Have you installed the
monitor driver?
Install the monitor driver according
to the Driver Installation Instructions.
"Unrecognized
monitor, Plug &
Play (VESA
DDC) monitor
found".
See the video card
manual to see if the Plug
& Play (VESA DDC)
Install the monitor driver according
to the Driver Installation Instructions.
function can be supported.
Problems
related to
Audio
No sound
Ensure that the audio cable is firmly
connected to both the audio-in port
on your monitor and the audio-out
port on your sound card.
(Refer to Connecting the Monitor)
Check the volume level.
Check the volume level.
Sound level is too low.
If the volume is still too low after
turning the control to its maximum,
check the volume control on the
computer sound card or software
program.
Check when
MagicTune™
does not
MagicTune™ feature is
found only on PC (VGA)
with Window OS that
* To check whether your PC is
available for MagicTune™ feature,
follow the
function
properly.
supports Plug and Play.
steps below (When Windows is
XP);
Control Panel -> Performance and
Maintenance -> System ->
Hardware -> Device Manager ->
Monitors -> After deleting Plug and
Play monitor, find 'Plug and Play
monitor' by searching new
Hardware.
MagicTune™ is an additional
software for the monitor. Some
graphic cards may not support your
monitor. When you have a problem
with the graphic card, visit our
website to check the compatible
graphic card list provided.
MagicTune™
doesn't work
properly.
Have you changed your
PC or video graphic card? program can be downloaded
Download the latest program. The
Did you install the
program?
Reboot the computer after installing the program for
the first time. If a copy of the program is already
installed, remove it, reboot the computer, and then
install the program again. You need to reboot the
computer for it to operate normally after installing or
removing the program.
Visit our website and download the installation software for MagicTune™ MAC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set to between 56Hz ~ 75Hz.
(Do not exceed 75Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter in the "
→
→
" and then
Control Panel System Device Administrator
reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized Service Center.
Q & A
Question
Answer
How can I change the
frequency?
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution in the Control
Panel→Display→Settings.
* Contact the video card manufacturer for details.
How can I set the Power Saving Windows ME/XP/2000 : Set the function in the BIOS-SETUP of
function?
the computer or the screen saver. (Refer to the Windows /
Computer Manual).
How can I clean the outer
case/LCD Panel?
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let
any water enter the monitor.
Self-Test Feature Check
Self-Test Feature Check | Warning Messages | Environment | Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.
Self-Test Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.
Download from Www.Somanuals.com. All Manuals Search And Download.
This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.
Warning Messages
If there is something wrong with the input signal, the message below appears on the screen
or the screen goes blank although the power indicator LED is still on. The message may
indicate that the monitor is out of scan range or that you need to check the signal cable.
Environment
The location and the position of the monitor may influence the quality and other
features of the monitor.
1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer
to another room.
2. Remove all electronic devices such as radios, fans, clocks and telephones that are
within 3 feet (one meter) of the monitor.
Useful Tips
z
A monitor recreates visual signals received from the computer. Therefore, if there is a problem
with the computer or the video card, this can cause the monitor to become blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case, first check the source of
the problem, and then contact the Service Center or your dealer.
z
Judging the monitor's working condition
If there is no image on the screen or a
"Not Optimum Mode","Recommended Mode 1600 X
message comes up, disconnect the cable from the computer while the monitor is
1200 60 Hz "
still powered on.
{
{
If there is a message coming up on the screen or if the screen goes white, this means the
monitor is in working condition.
In this case, check the computer for trouble.
Download from Www.Somanuals.com. All Manuals Search And Download.
General
General
Model Name
LCD Panel
SyncMaster 204BM
Size
20 inch (51 cm)
Display area
Pixel Pitch
408.0 mm (H) x 306.0 mm (V)
0.255 mm (H) x 0.255 mm (V)
Synchronization
Horizontal
30 ~ 81 kHz
56 ~ 75 Hz
Vertical
Display Color
16.7M
Resolution
Optimum resolution
Maximum resolution
Input Signal, Terminated
1600x1200@60 Hz
1600x1200@60 Hz
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ±5 %
Separate H/V sync, Composite sync, SOG(Option), TTL (V high ≥ 2.0V, V low ≤ 0.8V)
Maximum Pixel Clock
165 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %)，50/60 Hz
Signal Cable
15pin-to-15pin D-sub cable, Detachable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD)/ Weight
444 x 362 x 74.5 mm / 17.5 x 14.3 x 2.9 inch (Without Stand)
Download from Www.Somanuals.com. All Manuals Search And Download.
444 x 411.3 x 200.8 mm / 17.5 x 16.2 x 7.9 inch (With Stand) / 5.6 kg / 12.3 lbs
VESA Mounting Interface
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating
Temperature: 50°F ~ 104°F (10°C ~ 40°C)
Humidity: 10 % ~ 80 %, non-condensing
Storage
Temperature: -4°F ~113°F (-20°C ~ 45°C)
Humidity: 5 % ~ 95 %, non-condensing
Speaker
1 W X 2
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor
and the computer systems will provide the best operating conditions and monitor settings. In most
cases, the monitor installation will proceed automatically, unless the user wishes to select alternate
settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm
(one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE
color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality
and you can use it without any problelms.
z
For example, the number of TFT LCD sub pixels contained in this product are 5,760,000.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can
be used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor to low-power mode when it has not been used for a certain amount of time.
The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in
your computer. Use the software utility installed on your computer to set up this feature.
Power off
EPA/ENERGY 2000
State
Normal Operation
Power saving mode
Power Indicator
Blue
Blue, Blinking
off
Power Consumption
Less than 45 watts
Less than 1 watts
Less than 1 watts
®
This monitor is EPA ENERGY STAR compliant and ENERGY2000
compliant when used with a computer equipped with VESA DPM
functionality.
®
As an ENERGY STAR Partner, SAMSUNG has determined that this
®
product meets the ENERGY STAR guidelines for energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Table 1. Preset Timing Modes
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Display Mode
MAC,640X480
31.469
31.469
31.469
35.000
49.726
68.681
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.500
60.000
79.976
75.000
70.086
59.940
70.087
66.667
74.551
75.062
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.000
75.025
60.000
25.175
25.175
28.322
30.240
57.284
100.000
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
162.000
+/-
-/-
IBM, 640 x 480
IBM, 720 x 400
-/+
-/-
MAC, 640 x 480
MAC, 832 x 624
MAC, 1152 x 870
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 960
VESA, 1280 x 1024
VESA,1600 x 1200
-/-
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-/-
-/-
+/+
+/+
+/+
+/+
+/+
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of
the screen horizontally is called the Horizontal Cycle and the inverse
number of the Horizontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image
many times per second to display an image to the user. The
frequency of this repetition is called the Vertical Frequency or Refresh
Rate. Unit: Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care center.
North America
U.S.A
1-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
CANADA
MEXICO
Latin America
0800-333-3733
4004-0000
ARGENTINE
BRAZIL
CHILE
800-726-7864 (SAMSUNG)
01-8000112112
0-800-507-7267
1-800-10-7267
800-6225
COLOMBIA
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
1-800-299-0013
1-800-234-7267
800-7267
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
1-800-682-3180
1-800-751-2676
1-800-7267-864
0-800-100-5303
Europe
Download from Www.Somanuals.com. All Manuals Search And Download.
BELGIUM
02 201 2418
844 000 844
CZECH REPUBLIC
DENMARK
FINLAND
70 70 19 70
030-6227 515
3260 SAMSUNG(7267864)
(€ 0,15/min)
FRANCE
GERMANY
HUNGARY
ITALIA
01805 - 121213 (€ 0,14/Min)
06-80-SAMSUNG (7267864)
800 SAMSUNG (7267864)
0032 (0)2 201 24 18
0900 20 200 88 (€ 0,10/Min)
815-56 480
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
0 801 801 881
PORTUGAL
REPUBLIC OF IRELAND
SLOVAKIA
SPAIN
80 8 200 128
0818 717 100
0800-SAMSUNG (7267864)
902 10 11 30
SWEDEN
0771-400 200
SWITZERLAND
U.K
0800-7267864
0870 SAMSUNG (7267864)
CIS
800-7267
ESTONIA
LATVIA
800-7267
LITHUANIA
KAZAKHSTAN
RUSSIA
8-800-77777
8 800 080 1188
8-800-200-0400
8-800-502-0000
140-1234
UKRAINE
UZBEKISTAN
Asia Pacific
1300 362 603
AUSTRALIA
CHINA
800-810-5858, 010- 6475 1880
3698-4698
HONG KONG
INDIA
3030 8282, 1800 1100 11
0800-112-8888
INDONESIA
JAPAN
0120-327-527
MALAYSIA
1800-88-9999
Download from Www.Somanuals.com. All Manuals Search And Download.
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232, 02-689-3232
0800-329-999
VIETNAM
1 800 588 889
Middle East & Africa
SOUTH AFRICA
U.A.E
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
8000-4726
Terms
Dot Pitch
The image on a monitor is composed of red, green and blue dots. The closer the dots, the
higher the resolution. The distance between two dots of the same color is called the 'Dot
Pitch'. Unit: mm
Vertical Frequency
The screen must be redrawn several times per second in order to create and display an image
for the user. The frequency of this repetition per second is called the Vertical Frequency or
Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally
is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal
Frequency. Unit: kHz
Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom sequentially is called the
Non-Interlace method while showing odd lines and then even lines in turn is called the
Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a
clear image. The Interlace method is the same as that used in TVs.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the computer
and the monitor to exchange information automatically. This monitor follows the international
standard VESA DDC for the Plug & Play function.
Resolution
The number of horizontal and vertical dots used to compose the screen image is called the
'resolution'. This number shows the accuracy of the display. A high resolution is good for
performing multiple tasks as more image information can be shown on the screen.
Example: If the resolution is 1600 X 1200, this means the screen is composed of 1600
horizontal dots (horizontal resolution) and 1200 vertical lines (vertical resolution).
For Better Display
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described
below to enjoy the best quality of picture. You can have an uneven quality of picture in the
screen if the best quality of picture is not provided in TFT-LCD.
{
{
Resolution: 1600 X 1200
Vertical frequency (refresh rate): 60 Hz
2. TFT LCD panels manufactured by using advanced semiconductor technology with precision
of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN,
BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen.
This is not from bad quality and you can use it without any problelms.
{
For example, the number of TFT LCD sub pixels contained in this product are
5,760,000.
3. When cleaning the monitor and the panel outside, please apply the recommended small
amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly.
If excessive force is applied, you can have a stain on it.
4. If you are not satisfied with the picture quality, you can get better quality of picture by
performing the "auto adjustment function" in display screen that is appeared as window
termination button is pressed.
If there's still noise after the automatic adjustment, use the FINE/COARSE adjustment
function.
5. When viewing a fixed screen for an extended period of time, residual image or blurriness
may appear.
Change the mode to energy saving mode or set a screensaver to a changing picture when
away from the monitor for an extended period of time.
Authority
Information in this document is subject to change without notice.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics
Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and
Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are
registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and
logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an
ENERGY STAR® Partner, Samsung Electronics Co., Ltd. has determined that this product meets
the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein
may be the trademarks or registered trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT INFORMATION (Image Retention Free)
LCD Monitors and TVs may have image retention when switching from one image to another
especially after displaying a stationary image for a long time.
This guide is to demonstrate correct usage of LCD products in order to protect them from Image
retention.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
What is Image retention ?
During normal operation of a LCD panel, pixel image retention doesn't occur. However,
if the same image is displayed for a long time, a slight difference in electric charge
accumulates between the two electrodes which encase the liquid crystal. This may
cause the liquid crystal to build up in a certain areas of the display. Thus, the previous
image is retained when switching to a new video image. All display products, including
LCD,are subject to image retention. This is not a product defect.
Please follow the suggestions below to protect your LCD from image retention
Power Off, Screen Saver, or Power Save Mode
Ex)
z
Turn the power off when using a stationary pattern.
- Turn the power off for 4 hours after 20 hours in use
- Turn the power off for 2 hours after 12 hours in use
Use a Screen saver if possible
- Screen saver in one color or a moving image is recommended.
Set the Monitor to power off with the PC Display Properties Power Scheme.
z
z
Suggestions for specific applications
Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems
We recommend that you follow set up of your display system program as below:
Display Information together with Logo or Moving image cycle.
Ex) Cycle : Display Information for 1 hour followed by a
Display Logo or moving image for 1 minute.
Change the Color Information periodically (Use 2 different colors).
Ex) Rotate the Color Information with 2 colors every 30 minutes.
Avoid using a combination of characters and background color with large
difference in luminance.
Avoid using Grey colors, which can cause Image retention easily.
z
Avoid: Colors with big difference in luminance (Black & White, Grey)
Ex)
z
Recommended settings: Bright colors with little difference in luminance
- Change the characters color and background color every 30 minutes
Ex)
- Every 30 minutes, change the characters with movement.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ex)
The best way to protect your monitor from Image retention is to set your PC or
System to operate a Screen Saver program when you are not using it.
Image retention may not occur when a LCD panel is operated under normal conditions.
Normal conditions are defined as continuously changing video patterns. When the LCD
panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be
slight difference in voltage between electrodes that work the liquid crystal (LC) in a
pixel. The voltage difference between electrodes increases with time, forcing the liquid
crystal to lean. When this occurs, the previous image may be seen when the pattern is
changed.
To prevent this, the accumulated voltage difference must be decreased.
Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II
Download from Www.Somanuals.com. All Manuals Search And Download.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
|