READ AND SAVE THESE INSTRUCTIONS
WARNING: A risk of fire and electrical shock exists in all
electrical appliances and may cause personal injury or death.
Please follow all safety instructions.
Hot Beverage Machine
Download from Www.Somanuals.com. All Manuals Search And Download.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY
CAUTION: A short power supply cord is provided to reduce the risk
of personal injury resulting from becoming entangled in or tripping
over a longer cord. Extension cords are available from local hardware
stores and may be used if care is exercised in their use. If an
extension cord is required, special care and caution is necessary. Also
the cord must be: (1) marked with an electrical rating of 125 V, and at
least 13 A, 1625 W, and (2) the cord must be arranged so that it will
not drop over the countertop or tabletop where it can be pulled on by
children or tripped over accidentally.
POLARIZED PLUG: This appliance has a polarized plug, (one blade
is wider than the other). As a safety feature to reduce the risk of
electrical shock, this plug is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug, If
it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
ELECTRIC POWER: If the electric circuit is overloaded with other
appliances, your appliance may not operate properly. It should be
operated on a separate electric circuit from other operating
appliances.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 1
N
A
M
L
B
C
D
E
F
G
K
J
H
I
FIGURE 2
A
B
C
D
E
F
G
H
I
J
K
L
Milk pitcher
Drip grid with drip tray
Base
Features
Figure 1
Frothed milk spout
Figure 2
A
B
Water tank lid
A
B
C
D
E
F
Froth regulator
Suction piece
Connector
Carafe base
On/off switch with LED
light
Thermal Carafe
Swing-out filter
Removable filter liner
Button for opening the
swing-out filter
C
D
Water tank with cup
markings
Steam selector (“OFF”
position)
Milk discharge outlet
Flexible hose
Descaling hose
M
N
E
F
Steam nozzle
Feed pipe
Product may vary slightly
from illustrations.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 3
FIGURE 4
FIGURE 7
FIGURE 10
FIGURE 5
FIGURE 8
FIGURE 11
FIGURE 6
A
B
C
D
FIGURE 9
FIGURE 12
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on the purchase of your new Melitta® Choco Latte
Hot Beverage machine. You have purchased an innovative and
reliable appliance which we hope will give you years of enjoyment.
As with every technical appliance, there are some fundamental
aspects of this machine which should be observed. Please read
the operating instructions carefully and keep them in a safe place.
Above all, please pay attention to all safety instructions and
warnings.
Cord Compartment (Figure 3)
Your machine has a cord storage compartment to hide excess
cord and reduce countertop clutter.
Before Initial Use
Before you make coffee for the first time, you should perform the
brewing procedure once or twice using the maximum quantity of
water in order to clean your machine.
Fill the fresh water tank with cold water to the upper level marking.
Without using ground coffee or filter paper, switch the appliance on
and let the water run through it into the thermal carafe. Discard
water after it has run through the machine.
Making Coffee
1. Fill with water (Figure 4)
Lift the lid above the water tank. Remove the water tank using
the handle and fill it with cold tap water to the upper level marking.
Never use hot water. Never fill the water tank with milk,
prepared coffee, tea, etc.
The cup markings are on the water tank (Figure 1/C). The
markings refer to the quantity of fresh water. The actual yield
amount of coffee will be less, because the ground coffee
absorbs water.
Replace the water tank and close the lid.
Hint: To pre-warm the thermal carafe, rinse it out with hot water
before making coffee. DO NOT fill the thermal carafe with cold
water when it is still hot. All extreme temperature changes should
be avoided.
2. Insert filter paper (Figure 5)
Press the button to open the swing-out filter (Figure 1/L). The
filter automatically swings out to the right (Figure 5). Insert a
Size 4 Melitta Cone paper filter into the filter holder. Fold the
crimped edges over first.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Fill with ground coffee (Figure 6).
The amount of ground coffee to be used is a matter of taste. One
measuring spoonful (approx. 6-7g/2 TBS) is recommended per cup
for medium strength coffee. Swing back the filter until it clicks into
position. Ensure that the filter liner is properly seated (Figure 7).
4. Screw lid clockwise onto the thermal carafe and place on
the carafe base.
The lid must always be screwed onto the carafe because it
activates the anti-drip valve (Figure 8). Although closed, coffee
enters the carafe brew-through lid. It will remain hot and fresh
for several hours.
5. Switch on the appliance (Figure 9).
Plug appliance into a 120V ~ 60 Hz outlet. Using the on/off
switch (Figure 9/B), turn appliance on. The LED light (Figure
9/A) lights up.
6. Remove the thermal carafe.
When the carafe has been removed, the anti-drip valve (Figure
8) prevents surplus water from dripping on the carafe base.
Therefore make sure that the filter liner (Figure 7) is properly
seated.
To pour coffee, open the lid of the carafe by turning in a
counter-clockwise direction (or until the raised round mark is
over the spout). After pouring, close the lid by turning it in a
clockwise direction until it is tight. This will help keep the rest
of the coffee hot.
Unplug and allow to cool for 5 minutes between brewing
cycles.
IMPORTANT: If coffeemaker is not allowed to cool before
immediate repeated use, water placed in water carafe may
become overheated. A spray of steam could be released from
openings, creating a risk of burns.
Flavorings
Try adding 1 teaspoon of your favorite flavoring, e.g. vanilla,
hazelnut, or caramel to coffee before adding frothed milk. Adjust
to taste.
To froth or heat milk
You can make cappuccino, café latte and hot chocolate, or even
just heat milk using the frothed milk spout (Figure 2/A, B, C, D).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Assemble the frothed milk spout as follows (Figure 10):
1. Insert the froth regulator (Figure 2/A) into the suction piece
(Figure 2/B) and press it on firmly until froth regulator sits
directly on top of suction piece.
2. Push the suction piece into the connector (Figure 2/C) and place
the milk discharge outlet (Figure 2/D) onto the connector.
3. Firmly attach the complete frothed milk spout to the steam
nozzle (Figure 1/E) until the red seal of the steam nozzle is no
longer visible.
4. Leave the appliance switched on after the coffee has been
made. (You will hear a gurgling sound when brewing is
complete.)
5. Wait until the temperature indicator (Figure 9/C) lights up,
indicating that the steam temperature has been reached.
Caution: During operation the temperature indicator (Figure 9/C)
sometimes goes off. The required steam temperature is reached
again within a short time by turning the Steam selector to the right
(Figure 1D).
6. Fill the pitcher (Figure 1/G) with cold milk.
7. Replace the lid of the pitcher.
8. Securely connect the pitcher to the frothing nozzle (Figure 11).
You can also “vacuum” the milk directly out of a small milk
container using the flexible hose (Figure 2/E).
Important: The small milk container must not be allowed to exceed
the height of the steam nozzle. The flexible hose must be inserted
down into the container.
Connect the flexible hose to the steam nozzle and insert the
other end into the milk container (Figure 12).
Place an empty cup underneath the frothed milk spout
(Figure 12).
9. Turn the Steam selector to the right (Figure 9/D). This
“vacuums” the milk out of the milk pitcher or container. It is then
mixed with steam in the frothed milk spout, and at the same
time heated and frothed. The frothed milk flows through the
milk discharge outlet into the cup. Return Steam selector to
“OFF” position to stop milk flow.
Important: You can incorporate more or less air into the milk by
using the froth regulator (Figure 2/A). To do this, turn the knob
slowly to the left or the right until you achieve the desired result.
More air in the milk will result in thicker froth.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10.After making the frothed milk, turn the steam selector to the off
position.
11. You can froth as much milk as often as you like provided that
there is enough excess water in the water tank. If necessary,
simply add more water.
Caution: For frothing, do not fill the water tank above the top of
the “well” at base of water tank, otherwise the water flows into the
coffee brewing system.
Experiment to determine your preferences: first coffee, then
adding frothed milk, or first frothed milk then adding coffee.
Making cocoa
You can make hot chocolate by adding chocolate syrup to taste
(approximately 2-3 tablespoons per cup) to some milk in the milk
pitcher and stirring it. Proceed as if frothing milk. The mixture iwill
become completely heated by the hot steam in the frothing
nozzle. The mixture can also be frothed if desired (see section “to
froth or heat milk”).
Making Hot Tea
Tea leaves may be placed in the filter if you wish to make hot tea
instead of coffee. To brew 40 ounces of hot tea, use 31⁄2
tablespoons of fresh tea leaves or empty five 33⁄4 ounce bags of
tea into paper filter.
To Heat Water
1. Fill the pitcher with water.
2. Connect the pitcher to the frothing nozzle.
3. Proceed as if frothing milk.
4. Switch off the appliance using the on/off switch.
Descaling to prolong the life of your machine
The service life of your hot beverage machine can be lengthened
with regular descaling. We recommend descaling the appliance
every three months. This will also result in better tasting coffee
and other hot beverages.
If you use a permanent filter, remove it from the swing filter before
descaling.
For descaling use a liquid, such as environmentally-friendly
descaling agent available at retail outlets. Use it in accordance
with the manufacturer’s instructions. Do not use a formic
acid-based descaler.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Descaling your machine
Fill the water tank with water and then add the descaling agent in
that order. Swing the swing-out filter back into the appliance. Place
the carafe (with lid tightly screwed) onto the base (Figure 1/J).
Please note that the lid serves to open the anti-drip valve, and is
required to ensure that the water flows through correctly. Allow the
descaling solution to take effect for about 15 minutes, then switch
on the machine and allow the descaling solution to run through.
Empty carafe. If necessary repeat the descaling procedure.
Remove the steam nozzle by turning it counter-clockwise. Screw
on the descaling hose (Figure 2/F) and place a cup underneath.
Switch on the steam selector several times for one minute. Switch
off the appliance. If necessary repeat the descaling procedure.
Rinse out the water tank with clear water to remove any possible
traces of descaling solution.
Wait 5 minutes and then repeat the run-through process at least
twice using clear water. Empty carafe after each run-through.
Rinse the carafe, lid and filter liner thoroughly under running water.
Repeatedly squeeze the anti-drip valve while rinsing.
Switch on the steam selector and allow clear water to flow through
the steam system again to clean it. Remove the descaling hose
and replace the steam nozzle.
Cleaning
Unplug from outlet. Clean all parts that come into contact with milk
(frothed milk spout, pitcher, including lid and feed pipe, flexible
hose, drip tray and drip grid) in warm, sudsy water immediately
after each use. Dry the parts. Do not clean them in a dishwasher
as this could damage the seals.
The filter liner can be removed for cleaning. Press button on top of
machine (Figure 1N) and swing filter out to the right as far as it will
go. The inner liner can then be removed (Figure 7). You should
repeatedly press the anti-drip valve during cleaning, especially to
remove all particles of coffee. Wipe the machine with a damp
cloth, but never immerse in water! Wash out the carafe and lid
with hot, sudsy water, using a brush if necessary. Rinse and dry it
with a cloth. Do not clean it in a dishwasher.
What to do if . . .
•
only steam but no frothed milk is produced:
-
-
Attach the pitcher or flexible hose correctly.
Put the frothed milk spout together correctly and firmly.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
-
Press the froth regulator firmly onto the suction piece and
check the position of it (horizontal position for maximum
amount of froth).
-
-
Too little or no milk in the pitcher.
The flexible hose in the milk carton does not reach far
enough into the milk.
-
Steam nozzle or frothed milk spout requires cleaning.
•
•
the volume of milk froth is too low or frothing takes too long:
-
-
-
-
Clean the frothed milk spout.
Clean the steam nozzle.
Descale the machine
Use skim or 1% milk.
no steam is produced:
-
-
Refill the “well” in the water tank.
Insert the water tank correctly.
Spare parts / accessories
Thermal Carafe
If the glass in the thermal carafe breaks, you can purchase a new
carafe without lid from the Consumer Relations Department by
calling 1-800-947-3744.
Any servicing requiring disassembly other than the above
cleaning must be performed by authorized service center.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTICE
If any parts are missing or defective,
DO NOT return this product.
Please call our Customer Service Department for assistance.
800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST
Thank You
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED ONE YEAR WARRANTY
Warranty: This Melitta product is warranted by Salton, Inc. to be free from defects in materials
or workmanship for a period of (1) year from the original purchase date. This product warranty
covers only the original consumer purchaser of the product.
Warranty Coverage: This warranty is void if the product has been damaged by accident in
shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs by
unauthorized personnel, normal wear and tear, improper assembly, installation or maintenance
abuse or other causes not arising out of defects in materials or workmanship. This warranty is
effective only if the product is purchased and operated in the USA, and does not extend to any
units which have been used in violation of written instructions furnished with the product or to
units which have been altered or modified or to damage to products or parts thereof which have
had the serial number removed, altered, defaced or rendered illegible.
Implied Warranties: ANY IMPLIED WARRANTIES WHICH THE PURCHASER MAY HAVE
ARE LIMITED IN DURATION TO ONE (1) YEAR FROM THE DATE OF PURCHASE. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you.
Warranty Performance: During the above one-year warranty period, a product with a
defect will be either repaired or replaced with a reconditioned comparable model (at our
option) when the product is returned to the Repair Center, or the purchase price refunded.
The repaired or replacement product will be in warranty for the balance of the one-year
warranty period and an additional one-month period. No charge will be made for such repair
or replacement.
Service and Repair: Should the appliance malfunction, you should first call toll-free
1 (800) 233-9054 between the hours of 9:00 am and 5:00 pm Central Standard Time and
ask for CONSUMER SERVICE stating that you are a consumer with a problem. Please refer
to model number MECM1 when you call.
In-Warranty Service (USA): For an appliance covered under the warranty period, no
charge is made for service or postage. Call for return authorization (1 800 233-9054).
Out-of Warranty Service: A flat rate charge by model is made for out-of-warranty service.
Include $ 15.00 (U.S.) for return shipping and handling. We will notify you by mail of the amount
of the charge for service and require you to pay in advance for the repair or replacement.
For Products Purchased in the USA, but Used in Canada: You may return the product
insured, packaged with sufficient protection, and postage and insurance prepaid to the USA
address listed below. Please note that all customs duty / brokerage fees, if any, must be
paid by you and we will require you to pay the cost of customs duty / brokerage fees to us
in advance of our performing any service.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Risk During Shipment: We cannot assume responsibility for loss or damage during
incoming shipment. For your protection, carefully package the product for shipment and
insure it with the carrier. Be sure to enclose the following items with your appliance: any
accessories related to your problem, your full return address and daytime phone number, a
note describing the problem you experienced, a copy of your sales receipt or other proof of
purchase to determine warranty status. C.O.D. shipments cannot be accepted.
To return the appliance, ship to:
To contact us, please write to,
call, or email:
Attn: Repair Center
Salton, Inc.
Salton, Inc.
P.O. Box 6916
708 South Missouri Street
Macon, MO 63552
Columbia, MO 65205-6916
1(800) 233-9054
Email: [email protected]
Limitation of Remedies: No representative or person is authorized to assume for Salton,
Inc. any other liability in connection with the sale of our products. There shall be no claims
for defects or failure of performance or product failure under any theory of tort, contract or
commercial law including, but not limited to negligence, gross negligence, strict liability,
breach of warranty and breach of contract. Repair, replacement or refund shall be the sole
remedy of the purchaser under this warranty, and in no event shall Salton be liable for
any incidental or consequential damages, losses or expenses. Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Legal Rights: This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
For more information on Salton products:
© 2001 Salton, Inc.
All Rights Reserved
P/N 60482
Printed in China
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|