MODEL:RSL-2702S/RSL-382S
Roll Laminator Service Manual
451-8 24B/9L,Nonhyeon-dong,Namdong-Ku,Incheon city,KOREA
TEL:032) 822-0414 FAX:032)820-7105 A/S:080)262-8464
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Safety Precautions
Failure to comply any of the following safety procedures could result in serious injury.
Please read the instructions carefully and keep for future reference.
1. Only a licensed electrician should install wiring and outlet for the laminator.
2. Ensure the unit is plugged into a properly grounded outlet with the correct
voltage.
3. Keep hands and clothing(ie.Neckties)away from rollers. The rollers are pinch points that can
trap body parts or clothing and cause serious injury .
4. Keep flammable and wet objectsaway fromthe machine .
5. Place machine on a level surface.
6. Avoid excessive sunlight, humidity and extreme temperatures.
7. Ensure the unit is turned off, cooled ,and unplugged from the outlet prior to moving and/or
repairing.
8. Keep out of reach of children.
9. Only Royal Sovereign authorized maintenance and service technicians should make repairs.
10. Do not attempt to laminate items that exceed total recommended material thickness for the
unit.
11. When cleaning the machine, don't use flammable sprays or materials.
12. Do not touch the rollers when they are hot or place foreign objects inside the machine.
13. Do not cover the surface of the machine until the machine has completely cooled.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Troubleshooting
Note: While repairing:
a. Make sure the power plug is unplugged from the power outlet.
b. Open both side covers and rear cover.
c. Be sure to follow the steps below in order.
2.1 Rollers Not Heating
CAUSES:
1. Improper laminating mode.
2. Heating wire is not connected to the main PCB.
3. Blown (burnt) upper and/or lower wire fuse (T/Fuse).
4. Defective Bi-Metal.
5. Defective heater.
6. Defective Main PCB.
MEASURE
1. Improper laminating mode.
a. Ensure that the laminating mode is in the “Hot” mode, not the “Cold” mode.
Press “C/HOT” button on the control panel to change the mode.
2. Heating wire is not connected to the main PCB.
a. Connect the upper and lower heating wires to the main PCB.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Blown (burnt) upper and/or lower wire fuse (T/Fuse).
a. Replace the T/Fuse wire located on the left-hand side.
WIRE-UP-T/FUSE
WIRE-LO-T/ FUSE
4. Defective Bi-Metal.
a. Replace the Bi-Metal
BIMETAL-L(130℃)
BIMETAL-R(145℃)
5. Defective heater.
a. Using the multi-meter, test the continuity of the heater. If it fails, replace the heater.
Multi-meter
b. Physically examine the heater assembly for breakage.
Broken
3
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Defective Main PCB.
a. Replace the PCB Main.
2.2) Rollers Over Heating
CAUSES
1. Lower and upper heat sensors are reversed on the PCB Main.
2. Defective T/Fuse wire.
3. Defective heater.
4. Defective main PCB.
MEASURES
1. Wires for lower and upper heat sensors are reversed on the main PCB.
a. Reverse the heat sensors.
Connector-Wire Sensor
2. Defective T/Fuse wire.
a. Replace the T/Fuse wire located on the left-hand side.
WIRE-UP-T/FUSE
WIRE-LO-T/ FUSE
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Defective heater.
a. Test continuity of the heater. If it fails, replace the heater.
b. Glass tube that surrounds heating coil is broken – replace the heating element.
4. Defective Main PCB.
a. Replace the PCB Main.
2.3) Rollers Not Running
CAUSES
1. No power to the unit.
2. Emergency switch is engaged.
3. Opened safety cover.
4.Opened Front Table Switch.
5. Film is jammed on the rollers.
6. Disconnected motor wire.
7. Blown motor fuse.
8. Defective main motor.
9. Defective main PCB.
MEASURES
1. No power to the unit.
a. Make sure the power plug is connected to the proper source of outlet
(220V, 15Amp, & single phase).
2. Emergency switch is engaged.
Switch is engaged
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Opened safety cover.
a. Close the safety cover and double check to insure that the safety cover switch
is engaged.
Note: By closing the safety cover, it engages the safety cover switch.
Switch is engaged
4. Opened Front Table Switch.
a. Properly position the front table to engage the switch.
5. Film is jammed on the rollers.
a. Un-jam the film using a combination of the pressure lever and reverse button.
6. Disconnected motor wire.
a. Check the motor wire connection with PCB.
Wire-motor
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Blown motor fuse.
a. Replace the motor fuse located above the main power switch.
Motor Fuse
8. Defective main motor.
a. Replace the main motor.
9. Defective main PCB.
a. Replace the main PCB.
2.4) No Main Power
CAUSES
1. No electricity.
2. Blown main fuse.
3. Disconnected main power wires.
4. Defective transformer.
MEASURES
1. No Electricity.
a. Double check to insure that you have electricity from your outlet.
b. Check the circuit breaker.
c. Double check that source of power is 220V, 15Amp, and single phase.
2. Blown main fuse.
a. Replace the main fuse located above the main power switch.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Fuse
3. Disconnected main power wires.
a. Check that the main power wires are properly connected.
Main Power Wires
4. Transformer is defective
a. Replace the transformer.
Transformer
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5 Poor Lamination Quality
Problem: Straight wave lines across the output.
Cause: Excessive front roller pressure.
Measure: Loosen the front roller pressure.
Problem: Concave waves in the lamination.
Cause: Excessive rear (pulling) roller pressure.
Measure: Loosen the rear back roller pressure.
Problem: Angled waves on both sides of the output.
Cause: Insufficient rear roller pressure.
Measure: Tighten the rear roller pressure.
Problem: Angled waves on one side of the output.
Cause: Insufficient rear left (or right) side roller pressure.
Measure: Tighten the rear left (or right) side roller pressure.
Problem: Straight waves in the output.
Cause: Excessive heat at the nip rollers.
Measure: Lower the roller temperature.
Problem: Wake waves.
Cause: Insufficient heat at the nip rollers.
Measure: Raise the roller temperature.
Problem: Curling.
Cause: 1.The film tension is very tight;2.The decurling bar is not in the
working location.
Measure: 1.Loose the tension;2.Adjust the decurling bar to working
location.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Replacing Parts
Note: While replacing parts:
a. Make sure the power plug is unplugged from the power outlet.
b. Open both side covers and rear cover.
3.1 Replacing the Right Cover.
a. Take out the pressure lever (Figure 1) and four cover screws using Phillips screw driver (Figure 2).
Figure 2
Figure 1
b. Pull out the male control panel connector from the Sub-PCB（ Figure 3）.
Figure 3
c. Loosen two screws from Sub-PCB , installed on to new Right Cover (Figure 4).
Figure 4
d. Follow the reverse order to assemble the Right Cover back.
3.2 Replacing the Left Cover
a. Replace the Left Cover by loosening four Left Cover screws.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Replacing Rear Cover
a. Take off the left and right covers.
b. Take out the four screws from frames,two screws of each side(Figure 5,Figure 6)
Figure 5
Figure
3.4 Replacing the Main PCB
a. Remove the rear cover and label all the wires before unplugging from the Main PCB.
b. Detach the Main PCB from 6 white plastic holders ( Figure 7).
c. Replace the board with new PCB and connect all the wires.
Figur
3.5 Replacing the Sub-PCB
a. Refer to “Replacing Right Cover”.
3.6 Replacing the Heaters
Note: Cotton or surgical gloves are recommended while handling the heater assembly.
a. Disassemble Right and Left Covers (Refer to “Replacing Right Cover” and “Replacing Left Cover”).
b. Take out the heater brackets on each side by loosening screws (Figure 8, 9, & 10).
Figure8
Figure10
Figure
11
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Take out the broken heater. Figure 11
Figure 11
Note:
a. When inserting the heater into the roller, rotate the heater slightly and push the rod in gently.
b. Use an air blower to blow out the broken pieces of heating rod.
(Please ensure that no one is standing on the other side.)
3.7 Replacing the Cross Cutter
a. Disassemble the nut from the Frame-Cutter.
b. Unfasten the spring from the cutter.
c. Change the Cutter.
d. Assemble the Cutter by reversing the above steps.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Adjustments
4.1 Adjusting Take-up Shaft Speed
CAUSES:
1.Main rollers and take-up shaft speed is not synchronized.
MEASURES:
Adjust take-up shaft speed,by loosenning or tightenning the knob
According to label-take up.
C.W – Tighten.
C.C.W – Lossen.
C.C.W
C.W
4.2 Adjusting front and rear rollers
Pressure
• Use Screwdriver
to adjust the roller pressure:
C.W – Increase pressure.
C.C.W – Decrease pressure.
1.Using Push-Pull Scale , measure
5 spots as shown on Figure B &C:
Front roller should be 5~6 and back
rollers should be 6~8.
Figure A
2.Checking for over all tension –
when the machine is running, check that
the top and the bottom films are fed in
without any wrinkles.
3.Pressure mark checking (Heat Line) –
stop the machine for 30 seconds to
create a heat line. Then check to see if
you have two even parallel lines from
one end to other. Note: A narrow parallel
lines indicate that it has less pressure
at that point.
Figure B
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Laminating Test – Laminate samples
with different thickness of substrates.
5.Check above steps 2 through 4 with
3mil & 5mil films.
Figure C
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Part list
RSL-2702S Part list
RSL-2702S
No.
1
Part No.
013LR2012F
013LR2087A
013LR2088A
013LR3002K
013LR3009A
013LR3021A
013LR3075A
013LR3076A
013LR4004A
014LR3001A
015LR2001B
015LR3011A
015LR3012A
021CR3001A
021LR0001A
021LR2008A
021LR2013A
ASMLR1602A
ASMLR1608A
021LR3018A
021LR3024B
021LR4001A
023LR3005A
023LR4002A
023LR4004A
023LR4007A
026LR4006A
032LR3002A
111LR4004A
111LR4006A
111LR4018A
112004001D
120LR3004G
120LR3023A
120LR4008A
120LR4014A
12200X005A
12200X009A
12200X022A
12200X027A
12200X028A
12200X029A
12200X030A
12200X032A
12200X034A
12200X040A
122LR4024A
122LR4026A
122LR4042A
122LR4047A
Part Name
Remark
FRAME-SENSOR
2
FRAME-L
3
FRAME-R
4
FRAME-CUTTER
FRAME-REAR
PLATE-MIDDLE
BASE-FRONT
BASE-REAR
5
6
7
8
9
FRAME-COVER SAFETY
TABLE-FRONT
IDLE BAR LOW
IDLE-BAR
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
SHAFT-DECURLING
KNOB-CUTTER,C
COVER-L
COVER-TAKE UP,L
COVER-TAKE UP,R
ASM-SENSOR
ASM-SENSOR
COVER-R
COVER-SAFETY
LIMIT SWITCH COVER
BUTTON-FUNC
KNOB-BOLT GUIDE
KNOB-TENSION
KNOB-LEVEL
FOOT
SHEET-FUNC
BOLT-CORE
BOLT-GUIDE
SCREW-H
NUT
SHAFT-FILM,L
SHAFT-CAM
SHAFT-TABLE
SHAFT-TAKE UP
BEARING-TRUST NEEDLE
DU BUSH
BEARING-RADIAL TRUST
DU BUSH
DU BUSH
DU BUSH
DU BUSH
DU BUSH
DU BUSH
DU BUSH
BUSH-ROLLER LAMI,UP
BUSH-ROLLER PULL,UP
BUSH-ROLLER LAMI,LO-LEFT
BUSH-ROLLER PULL,LO
15
Download from Www.Somanuals.com. All Manuals Search And Download.
RSL-2702S
51
52
122LR4050A
124LR4005A
124LR4006A
125LR4001A
125LR4003B
125LR4004A
125LR4008A
131LR4017A
131LR4022B
131LR4023A
131LR4034A
133LR2021A
133LR2021B
133LR2022A
133LR2022B
134LR4001A
134LR4003A
136LR4001C
136LR4001G
138LR4001A
138LR4012A
138LR4015A
138LR4018A
140LR3001A
140LR4001A
140LR4021A
141LP4018A
141LR3017A
141LR3018A
141LR4005A
141LR4020A
141LR4035A
141LR4040A
141LR4041A
141LR4043A
141LR4054A
141LR4059A
141LR4060A
141LR4061A
141LR4081A
141LR4087A
143LR3001A
144LR4001B
145LR3002A
147LR4002A
147LR4010A
147LR4013A
210004002A
211003004A
211003004B
213LR4001A
223LR2007B
223LR2007C
223LR2007D
223LR2007F
BUSH-ROLLER LAMI,LO-RIGHT ASS'Y
CAM
53
1"CORE
54
HANDLE-TENSION
LEVER-PRESSURE
SHAFT-TENSION 2
SUPPORT-SPRING
SPROCKET-LAMI
SPROCKET-DOUBLE
SPROCKET-TAKE UP
SPROCKET-MOTOR
ROLLER-LAMI,LO
ROLLER-LAMI,UP
ROLLER-PULL,LO
ROLLER-PULL,UP
PULLEY-CHAIN
55
56
57
58
59
60
61
62
63
64
65
66
67
BUSH-PULLEY
68
CHAIN
69
CHAIN-2(TAKE UP)
SPRING-CUTTER CROSS
SPRING-TENSION
SPRING-PRESSURE
SPRING-LEVER
70
71
72
73
74
HOLDER-CUTTER,C
HOLDER-SHAFT FILM
HOLDER-SHAFT,T
BRACKET-T/FUSE
PLATE-PRESSURE,L
PLATE-PRESSURE,R
PLATE-SHAFT FILM
BRACKET-HEATER,LO-R
PLATE-DU BUSH
PLATE-SLIP
75
76
77
78
79
80
81
82
83
84
BRACKET-FAN
85
FRONT TABLE SAFETY LEVER
BRACKET-LIMIT SWITCH
BRACKET-SENSOR
PLATE-PRESSURE,LAMI
PLATE-PRESSURE,PULL
BRACKET-HEATER,LO-L
BRACKET-HEATER,UP
SUPPORTER-SHAFT
CLAMPER-LEVER
GUIDE-DOCUMENT
PAD-TENSION
86
87
88
89
90
91
92
93
94
95
96
PAD-TAKE UP
97
STOPPER-HEATER,UP
MOTOR-MAIN
98
99
FAN
99-1
100
101
101-1
101-2
101-3
FAN
CUTTER-CROSS
HEATER ASS'Y
HEATER ASS'Y
HEATER ASS'Y
HEATER ASS'Y
16
Download from Www.Somanuals.com. All Manuals Search And Download.
RSL-2702S
102
103
23200X002A
23300X001A
32500X0005
32500X0008
34000S011A
350LR3022A
350LR3036C
363LP3001A
363LR4001F
36400X002B
36400X014B
36600X001A
380CR4003A
380CR4004A
380LR4001A
380LR4001B
380LR4003A
380LR4007A
381LR4013C
381LR4020B
381LR4030D
381LR4043A
381LR4044A
381LR4052A
381LR4054A
381LR4055A
381LR4084A
381LR4091A
381LR4092A
443LR4001A
ASMLR1339A
ASMLR1339B
KPS03012D2
KPS05010D2
RE001000C8
RC001200C8
RIV05018E8
SKE04010D2
SKE05006D2
SKE05010D2
SKE05015D2
013LR4010A
013LR4011A
141LR4127A
141LR4128A
111LR4022A
SUPPORT-PCB
BUSHING-CORD
FUSE-MAIN
104
104-1
105
FUSE-MAIN
POWER TRANSFORMER
PCB-SUB ASS'Y
PCB-MAIN ASS'Y
BI-METAL LO
106
107
108
109
BI-METAL UP
110
SWITCH-MAIN
MICRO S/W
111
112
FUSE-HOLDER
POWER CORD
113
113-1
113-2
113-3
113-4
113-5
114
POWER CORD
POWER CORD
POWER CORD
POWER CORD
POWER CORD
WIRE-POWER S/W
WIRE-FUSE,EU
WIRE-UP HEATER1,EU
WIRE-SAFETY S/W
WIRE-MAIN
115
116
117
118
119
WIRE-MOTOR
120
WIRE-LO HEATER2,EU
WIRE-UP HEATER2,EU
WIRE-T/FUSE(UP)
WIRE-LO HEATER1,EU
WIRE-T/FUSE(LO)
L-WRENCH
121
122
123
124
125
126
ASM-AUTO GRIP FILM CORE 2"
ASM-AUTO GRIP FILM CORE3"
KEY-PLAIN
126-1
127
128
KEY-PLAIN
129
E-RING
130
SNAP-RING
131
RIVET
132
SET SCREW
132-1
132-2
132-3
133
134
135
136
137
SET SCREW
SET SCREW
SET SCREW
FRAME-GUIDE，R
FRAME-GUIDE，L
BRACKET-DECURLING BAR,R
BRACKET-DECURLING BAR,L
KNOB-GUIDE
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Part list
RSL-382S Part list
RSL-382S
No.
1
Part No.
013LR2012G
013LR2087A
013LR2088A
013LR3002H
013LR3035A
013LR3036A
013LR3069A
013LR3070A
013LR4004A
014LR3001B
015LR2010A
015LR3011B
015LR3012B
021CR3001A
021LR0001A
021LR2008A
021LR2013A
ASMLR1604A
ASMLR1608A
021LR3018A
021LR3024A
021LR4001A
023LR3005A
023LR4002A
023LR4004A
023LR4010A
026LR4006A
032LR3002A
111LR4004A
111LR4006A
111LR4018A
112004001D
120LR3004E
120LR3031B
120LR4008A
120LR4014C
12200X005A
12200X009A
12200X022A
12200X027A
12200X028A
12200X029A
12200X030A
12200X032A
12200X034A
12200X040A
122LR4024A
122LR4026A
122LR4042A
122LR4047A
Part Name
Remark
FRAME-SENSOR
2
FRAME-L
3
FRAME-R
4
FRAME-CUTTER
FRAME-REAR
PLATE-MIDDLE
BASE-FRONT
BASE-REAR
5
6
7
8
9
FRAME-COVER SAFETY
TABLE-FRONT
IDLE BAR LOW
IDLE-BAR
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
SHAFT-DECURLING
KNOB-CUTTER,C
COVER-L
COVER-TAKE UP,L
COVER-TAKE UP,R
ASM-SENSOR
ASM-SENSOR
COVER-R
COVER-SAFETY
LIMIT SWITCH COVER
BUTTON-FUNC
KNOB-BOLT GUIDE
KNOB-TENSION
KNOB-LEVEL
FOOT
SHEET-FUNC
BOLT-CORE
BOLT-GUIDE
SCREW-H
NUT
SHAFT-FILM,L
SHAFT-CAM
SHAFT-TABLE
SHAFT-TAKE UP
BEARING-TRUST NEEDLE
DU BUSH
BEARING-RADIAL TRUST
DU BUSH
DU BUSH
DU BUSH
DU BUSH
DU BUSH
DU BUSH
DU BUSH
BUSH-ROLLER LAMI,UP
BUSH-ROLLER PULL,UP
BUSH-ROLLER LAMI,LO-LEFT
BUSH-ROLLER PULL,LO
18
Download from Www.Somanuals.com. All Manuals Search And Download.
RSL-382S
51
52
122LR4050A
124LR4005A
124LR4006A
125LR4001A
125LR4003B
125LR4004A
125LR4008A
131LR4017A
131LR4022B
131LR4023A
131LR4034A
133LR3001A
133LR3002A
134LR4001A
134LR4003A
136LR4001C
136LR4001G
138LR4001A
138LR4012A
138LR4015A
138LR4018A
140LR3001A
140LR4001A
140LR4021A
141LP4018A
141LR3017A
141LR3018A
141LR4005A
141LR4020A
141LR4035A
141LR4040A
141LR4043A
141LR4054A
141LR4059A
141LR4060A
141LR4061A
141LR4081A
141LR4087A
143LR3001A
144LR4001B
145LR3002A
147LR4002A
147LR4010A
147LR4013A
210004002A
213LR4001A
223LR3001H
223LR3001J
23200X001A
23300X001A
32500X0008
34000S011A
350LR3022A
350LR3036C
363LP4013A
BUSH-ROLLER LAMI,LO-RIGHT ASS'Y
CAM
53
1"CORE
54
HANDLE-TENSION
LEVER-PRESSURE
SHAFT-TENSION 2
SUPPORT-SPRING
SPROCKET-LAMI
SPROCKET-DOUBLE
SPROCKET-TAKE UP
SPROCKET-MOTOR
ROLLER-LAMI
55
56
57
58
59
60
61
62
64
ROLLER-PULL
66
PULLEY-CHAIN
67
BUSH-PULLEY
68
CHAIN
69
CHAIN-2(TAKE UP)
SPRING-CUTTER CROSS
SPRING-TENSION
SPRING-PRESSURE
SPRING-LEVER
70
71
72
73
74
HOLDER-CUTTER,C
HOLDER-SHAFT FILM
HOLDER-SHAFT,T
BRACKET-T/FUSE
PLATE-PRESSURE,L
PLATE-PRESSURE,R
PLATE-SHAFT FILM
BRACKET-HEATER,LO-R
PLATE-DU BUSH
PLATE-SLIP
75
76
77
78
79
80
81
82
83
85
FRONT TABLE SAFETY LEVER
BRACKET-LIMIT SWITCH
BRACKET-SENSOR
PLATE-PRESSURE,LAMI
PLATE-PRESSURE,PULL
BRACKET-HEATER,LO-L
BRACKET-HEATER,UP
SUPPORTER-SHAFT
CLAMPER-LEVER
GUIDE-DOCUMENT
PAD-TENSION
86
87
88
89
90
91
92
93
94
95
96
PAD-TAKE UP
97
STOPPER-HEATER,UP
MOTOR-MAIN
98
100
101
101-1
102
103
104
105
106
107
108
CUTTER-CROSS
HEATER ASS'Y
HEATER ASS'Y
SUPPORT-PCB
BUSHING-CORD
FUSE-MAIN
POWER TRANSFORMER
PCB-SUB ASS'Y
PCB-MAIN ASS'Y
BI-METAL UP
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RSL-382S
109
110
033LR4002A
36400X002B
36400X014B
36600X001A
380LR4001A
380LR4003A
380LR4007A
381LR4013J
381LR4020B
381LR4030D
381LR4044B
381LR4052A
381LR4054A
381LR4055A
381LR4084A
381LR4091A
381LR4092B
443LR4001A
ASMLR1339A
ASMLR1339B
KPS03012D2
KPS05010D2
RC001200C8
RE001000C8
RIV05018E8
SKE04010D2
SKE05006D2
SKE05010D2
SKE05015D2
013LR4010A
013LR4011A
141LR4127A
141LR4128A
111LR4022A
WASHER-BI METAL
SWITCH-MAIN
MICRO S/W
111
112
FUSE-HOLDER
POWER CORD
113
113-1
113-2
114
POWER CORD
POWER CORD
WIRE-POWER S/W
WIRE-FUSE,EU
WIRE-UP HEATER1,EU
WIRE-MAIN
115
116
118
119
WIRE-MOTOR
120
WIRE-LO HEATER2,EU
WIRE-UP HEATER2,EU
WIRE-T/FUSE(UP)
WIRE-LO HEATER1,EU
WIRE-T/FUSE(LO)
L-WRENCH
121
122
123
124
125
126
ASM-AUTO GRIP FILM CORE 2"
ASM-AUTO GRIP FILM CORE3"
KEY-PLAIN
126-1
127
128
KEY-PLAIN
129
SNAP-RING
130
E-RING
131
RIVET
132
SET SCREW
132-1
132-2
132-3
133
134
135
136
137
SET SCREW
SET SCREW
SET SCREW
FRAME-GUIDE，R
FRAME-GUIDE，L
BRACKET-DECURLING BAR,R
BRACKET-DECURLING BAR,L
KNOB-GUIDE
20
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Explode View
Explode View
Frame L
Frame R
Frame, Roller and Other View
Wire, Front Table ,Film Shaft and Control PCB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
RSL-2702S Expolde View
1
2
013LR2012F FRAME-SENSOR
013LR2087A FRAME-L
3
013LR2088A FRAME-R
4
013LR3002K FRAME-CUTTER
013LR3009A FRAME-REAR
013LR3021A PLATE-MIDDLE
013LR3075A BASE-FRONT
013LR3076A BASE-REAR
5
6
7
8
9
013LR4004A FRAME-COVER SAFETY
014LR3001A TABLE-FRONT
015LR2001B IDLE BAR LOW
015LR3011A IDLE-BAR
10
11
12
13
015LR3012A SHAFT-DECURLING
021CR3001A KNOB-CUTTER,C
021LR0001A COVER-L
14
15
16
021LR2008A COVER-TAKE UP,L
021LR2013A COVER-TAKE UP,R
ASMLR1602A ASM-SENSOR
ASMLR1608A ASM-SENSOR
021LR3018A COVER-R
17
18
19
20
21
021LR3024B COVER-SAFETY
021LR4001A LIMIT SWITCH COVER
023LR3005A BUTTON-FUNC
023LR4002A KNOB-BOLT GUIDE
023LR4004A KNOB-TENSION
023LR4007A KNOB-LEVEL
026LR4006A FOOT
22
23
24
25
26
27
28
032LR3002A SHEET-FUNC
111LR4004A BOLT-CORE
29
30
111LR4006A BOLT-GUIDE
111LR4018A SCREW-H
31
32
112004001D NUT
33
120LR3004G SHAFT-FILM,L
120LR3023A SHAFT-CAM
34
35
120LR4008A SHAFT-TABLE
120LR4014A SHAFT-TAKE UP
12200X005A BEARING-TRUST NEEDLE
12200X009A DU BUSH
36
37
38
39
12200X022A BEARING-RADIAL TRUST
12200X027A DU BUSH
40
41
12200X028A DU BUSH
42
12200X029A DU BUSH
43
12200X030A DU BUSH
44
12200X032A DU BUSH
45
12200X034A DU BUSH
46
12200X040A DU BUSH
47
122LR4024A BUSH-ROLLER LAMI,UP
122LR4026A BUSH-ROLLER PULL,UP
122LR4042A BUSH-ROLLER LAMI,LO-LEFT
122LR4047A BUSH-ROLLER PULL,LO
122LR4050A BUSH-ROLLER LAMI,LO-RIGHT ASS'Y
124LR4005A CAM
48
49
50
51
52
53
124LR4006A 1"CORE
54
125LR4001A HANDLE-TENSION
125LR4003B LEVER-PRESSURE
55
56
125LR4004A SHAFT-TENSION
125LR4008A SUPPORT-SPRING
131LR4017A SPROCKET-LAMI
2
57
58
59
131LR4022B SPROCKET-DOUBLE
131LR4023A SPROCKET-TAKE UP
131LR4034A SPROCKET-MOTOR
133LR2021A ROLLER-LAMI,LO
133LR2021B ROLLER-LAMI,UP
133LR2022A ROLLER-PULL,LO
133LR2022B ROLLER-PULL,UP
134LR4001A PULLEY-CHAIN
134LR4003A BUSH-PULLEY
136LR4001C CHAIN
60
61
62
63
64
65
66
67
68
69
136LR4001G CHAIN-2(TAKE UP)
138LR4001A SPRING-CUTTER CROSS
138LR4012A SPRING-TENSION
138LR4015A SPRING-PRESSURE
138LR4018A SPRING-LEVER
140LR3001A HOLDER-CUTTER,C
140LR4001A HOLDER-SHAFT FILM
140LR4021A HOLDER-SHAFT,T
141LP4018A BRACKET-T/FUSE
141LR3017A PLATE-PRESSURE,L
141LR3018A PLATE-PRESSURE,R
141LR4005A PLATE-SHAFT FILM
141LR4020A BRACKET-HEATER,LO-R
141LR4035A PLATE-DU BUSH
141LR4040A PLATE-SLIP
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
141LR4041A BRACKET-FAN
141LR4043A FRONT TABLE SAFETY LEVER
141LR4054A BRACKET-LIMIT SWITCH
141LR4059A BRACKET-SENSOR
141LR4060A PLATE-PRESSURE,LAMI
141LR4061A PLATE-PRESSURE,PULL
141LR4081A BRACKET-HEATER,LO-L
141LR4087A BRACKET-HEATER,UP
143LR3001A SUPPORTER-SHAFT
144LR4001B CLAMPER-LEVER
145LR3002A GUIDE-DOCUMENT
147LR4002A PAD-TENSION
147LR4010A PAD-TAKE UP
147LR4013A STOPPER-HEATER,UP
210004002A MOTOR-MAIN
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
211003004A FAN
99-1
100
101
101-1
101-2
101-3
102
103
104
104-1
105
106
107
108
109
110
111
112
113
113-1
113-2
113-3
113-4
113-5
114
115
116
117
118
119
120
121
122
123
124
125
126
126-1
127
128
129
130
131
132
132-1
132-2
132-3
133
134
135
136
137
211003004B FAN
213LR4001A CUTTER-CROSS
223LR2007B HEATER ASS'Y
223LR2007C HEATER ASS'Y
223LR2007D HEATER ASS'Y
223LR2007F HEATER ASS'Y
23200X002A SUPPORT-PCB
23300X001A BUSHING-CORD
32500X0005 FUSE-MAIN
32500X0008 FUSE-MAIN
34000S011A POWER TRANSFORMER
350LR3022A PCB-SUB ASS'Y
350LR3036C PCB-MAIN ASS'Y
363LP3001A BI-METAL LO
363LR4001F BI-METAL UP
36400X002B SWITCH-MAIN
36400X014B MICRO S/W
36600X001A FUSE-HOLDER
380CR4003A POWER CORD
380CR4004A POWER CORD
380LR4001A POWER CORD
380LR4001B POWER CORD
380LR4003A POWER CORD
380LR4007A POWER CORD
381LR4013C WIRE-POWER S/W
381LR4020B WIRE-FUSE,EU
381LR4030D WIRE-UP HEATER1,EU
381LR4043A WIRE-SAFETY S/W
381LR4044A WIRE-MAIN
381LR4052A WIRE-MOTOR
381LR4054A WIRE-LO HEATER2,EU
381LR4055A WIRE-UP HEATER2,EU
381LR4084A WIRE-T/FUSE(UP)
381LR4091A WIRE-LO HEATER1,EU
381LR4092A WIRE-T/FUSE(LO)
443LR4001A L-WRENCH
ASMLR1339A ASM-AUTO GRIP FILM CORE 2"
ASMLR1339B ASM-AUTO GRIP FILM CORE3"
KPS03012D2 KEY-PLAIN
KPS05010D2 KEY-PLAIN
RE001000C8 E-RING
RC001200C8 SNAP-RING
RIV05018E8 RIVET
SKE04010D2 SET SCREW
SKE05006D2 SET SCREW
SKE05010D2 SET SCREW
SKE05015D2 SET SCREW
013LR4010A FRAME-GUIDE，R
013LR4011A FRAME-GUIDE，L
141LR4127A BRACKET-DECURLING BAR,R
141LR4128A BRACKET-DECURLING BAR,L
111LR4022A KNOB-GUIDE
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame - L
2
15
16
22
27
32
38
41
47
52
72
77
78
82
86
88
89
90
91
92
97
108
111
128
129
013LR2087A FRAME-L
021LR0001A COVER-L
021LR2008A COVER-TAKE UP,L
021LR4001A LIMIT SWITCH COVER
026LR4006A FOOT
112004001D NUT
12200X009A DU BUSH
12200X028A DU BUSH
122LR4024A BUSH-ROLLER LAMI,UP
124LR4005A CAM
138LR4015A SPRING-PRESSURE
141LP4018A BRACKET-T/FUSE
141LR3017A PLATE-PRESSURE,L
141LR4035A PLATE-DU BUSH
141LR4054A BRACKET-LIMIT SWITCH
141LR4060A PLATE-PRESSURE,LAMI
141LR4061A PLATE-PRESSURE,PULL
141LR4081A BRACKET-HEATER,LO-L
141LR4087A BRACKET-HEATER,UP
143LR3001A SUPPORTER-SHAFT
147LR4013A STOPPER-HEATER,UP
363LP3001A BI-METAL LO
36400X014B MICRO S/W
KPS05010D2 KEY-PLAIN
RE001000C8 E-RING
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame - R
3
17
013LR2088A FRAME-R
021LR2013A COVER-TAKE UP,R
021LR3018A COVER-R
20
23
023LR3005A BUTTON-FUNC
023LR4004A KNOB-TENSION
023LR4007A KNOB-LEVEL
026LR4006A FOOT
25
26
27
37
12200X005A BEARING-TRUST NEEDLE
12200X022A BEARING-RADIAL TRUST
12200X028A DU BUSH
39
41
47
122LR4024A BUSH-ROLLER LAMI,UP
124LR4005A CAM
52
54
125LR4001A HANDLE-TENSION
125LR4003B LEVER-PRESSURE
125LR4004A SHAFT-TENSION 2
125LR4008A SUPPORT-SPRING
131LR4017A SPROCKET-LAMI
131LR4022B SPROCKET-DOUBLE
131LR4023A SPROCKET-TAKE UP
131LR4034A SPROCKET-MOTOR
134LR4001A PULLEY-CHAIN
134LR4003A BUSH-PULLEY
136LR4001C CHAIN
55
56
57
58
59
60
61
66
67
68
69
136LR4001G CHAIN-2(TAKE UP)
138LR4012A SPRING-TENSION
138LR4015A SPRING-PRESSURE
138LR4018A SPRING-LEVER
141LR3018A PLATE-PRESSURE,R
141LR4020A BRACKET-HEATER,LO-R
141LR4040A PLATE-SLIP
141LR4060A PLATE-PRESSURE,LAMI
141LR4061A PLATE-PRESSURE,PULL
141LR4087A BRACKET-HEATER,UP
144LR4001B CLAMPER-LEVER
147LR4010A PAD-TAKE UP
147LR4013A STOPPER-HEATER,UP
210004002A MOTOR-MAIN
32500X0005 FUSE-MAIN
71
72
73
79
81
83
88
89
91
93
96
97
98
104
104-1
106
109
112
125
127
128
130
132
132-1
132-2
132-3
32500X0008 FUSE-MAIN
350LR3022A PCB-SUB ASS'Y
363LR4001F BI-METAL UP
36600X001A FUSE-HOLDER
443LR4001A L-WRENCH
KPS03012D2 KEY-PLAIN
KPS05010D2 KEY-PLAIN
RC001200C8 SNAP-RING
SKE04010D2 SET SCREW
SKE05006D2 SET SCREW
SKE05010D2 SET SCREW
SKE05015D2 SET SCREW
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame, Roller and Other View
1
2
013LR2012F FRAME-SENSOR
013LR2087A FRAME-L
3
013LR2088A FRAME-R
4
013LR3002K FRAME-CUTTER
013LR3009A FRAME-REAR
5
6
013LR3021A PLATE-MIDDLE
013LR3075A BASE-FRONT
7
8
013LR3076A BASE-REAR
9
013LR4004A FRAME-COVER SAFETY
014LR3001A TABLE-FRONT
015LR2001B IDLE BAR LOW
015LR3011A IDLE-BAR
10
11
12
13
015LR3012A SHAFT-DECURLING
021CR3001A KNOB-CUTTER,C
ASMLR1602A ASM-SENSOR
14
18
19
ASMLR1608A ASM-SENSOR
21
021LR3024B COVER-SAFETY
023LR4002A KNOB-BOLT GUIDE
026LR4006A FOOT
24
27
28
032LR3002A SHEET-FUNC
29
111LR4004A BOLT-CORE
30
111LR4006A BOLT-GUIDE
31
111LR4018A SCREW-H
32
112004001D NUT
33
120LR3004G SHAFT-FILM,L
120LR3023A SHAFT-CAM
34
35
120LR4008A SHAFT-TABLE
120LR4014A SHAFT-TAKE UP
12200X005A BEARING-TRUST NEEDLE
12200X027A DU BUSH
36
37
40
42
12200X029A DU BUSH
43
12200X030A DU BUSH
44
12200X032A DU BUSH
45
12200X034A DU BUSH
46
12200X040A DU BUSH
48
122LR4026A BUSH-ROLLER PULL,UP
122LR4042A BUSH-ROLLER LAMI,LO-LEFT
122LR4047A BUSH-ROLLER PULL,LO
122LR4050A BUSH-ROLLER LAMI,LO-RIGHT ASS'Y
124LR4006A 1"CORE
49
50
51
53
62
133LR2021A ROLLER-LAMI,LO
133LR2021B ROLLER-LAMI,UP
133LR2022A ROLLER-PULL,LO
133LR2022B ROLLER-PULL,UP
138LR4001A SPRING-CUTTER CROSS
140LR3001A HOLDER-CUTTER,C
140LR4001A HOLDER-SHAFT FILM
140LR4021A HOLDER-SHAFT,T
141LR4005A PLATE-SHAFT FILM
141LR4041A BRACKET-FAN
141LR4043A FRONT TABLE SAFETY LEVER
141LR4059A BRACKET-SENSOR
145LR3002A GUIDE-DOCUMENT
147LR4002A PAD-TENSION
211003004A FAN
63
64
65
70
74
75
76
80
84
85
87
94
95
99
99-1
100
101
101-1
101-2
101-3
102
103
105
107
110
124
126
126-1
131
133
134
135
136
137
211003004B FAN
213LR4001A CUTTER-CROSS
223LR2007B HEATER ASS'Y
223LR2007C HEATER ASS'Y
223LR2007D HEATER ASS'Y
223LR2007F HEATER ASS'Y
23200X002A SUPPORT-PCB
23300X001A BUSHING-CORD
34000S011A POWER TRANSFORMER
350LR3036C PCB-MAIN ASS'Y
36400X002B SWITCH-MAIN
381LR4092A WIRE-T/FUSE(LO)
ASMLR1339A ASM-AUTO GRIP FILM CORE 2"
ASMLR1339B ASM-AUTO GRIP FILM CORE3"
RIV05018E8 RIVET
013LR4010A FRAME-GUIDE，R
013LR4011A FRAME-GUIDE，L
141LR4127A BRACKET-DECURLING BAR,R
141LR4128A BRACKET-DECURLING BAR,L
111LR4022A KNOB-GUIDE
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Wire, Film Shaft,Ass'y-Auto
29
111LR4004A BOLT-CORE
36
120LR4014A SHAFT-TAKE UP
12200X034A DU BUSH
45
53
124LR4006A 1"CORE
113
380CR4003A POWER CORD
380CR4004A POWER CORD
380LR4001A POWER CORD
380LR4001B POWER CORD
380LR4003A POWER CORD
380LR4007A POWER CORD
381LR4013C WIRE-POWER S/W
381LR4020B WIRE-FUSE,EU
381LR4030D WIRE-UP HEATER1,EU
381LR4043A WIRE-SAFETY S/W
381LR4044A WIRE-MAIN
113-1
113-2
113-3
113-4
113-5
114
115
116
117
118
119
381LR4052A WIRE-MOTOR
381LR4054A WIRE-LO HEATER2,EU
381LR4055A WIRE-UP HEATER2,EU
381LR4084A WIRE-T/FUSE(UP)
381LR4091A WIRE-LO HEATER1,EU
443LR4001A L-WRENCH
120
121
122
123
125
126
ASMLR1339A ASM-AUTO GRIP FILM CORE 2"
ASMLR1339B ASM-AUTO GRIP FILM CORE3"
RIV05018E8 RIVET
126-1
131
132
SKE04010D2 SET SCREW
132-1
132-2
132-3
SKE05006D2 SET SCREW
SKE05010D2 SET SCREW
SKE05015D2 SET SCREW
26
Download from Www.Somanuals.com. All Manuals Search And Download.
RSL-382S Expolde View
1
2
013LR2012G FRAME-SENSOR
013LR2087A FRAME-L
3
013LR2088A FRAME-R
4
013LR3002H FRAME-CUTTER
013LR3035A FRAME-REAR
013LR3036A PLATE-MIDDLE
013LR3069A BASE-FRONT
013LR3070A BASE-REAR
5
6
7
8
9
013LR4004A FRAME-COVER SAFETY
014LR3001B TABLE-FRONT
015LR2010A IDLE BAR LOW
015LR3011B IDLE-BAR
10
11
12
13
015LR3012B SHAFT-DECURLING
021CR3001A KNOB-CUTTER,C
021LR0001A COVER-L
14
15
16
021LR2008A COVER-TAKE UP,L
021LR2013A COVER-TAKE UP,R
ASMLR1604A ASM-SENSOR
ASMLR1608A ASM-SENSOR
021LR3018A COVER-R
17
18
19
20
21
021LR3024A COVER-SAFETY
021LR4001A LIMIT SWITCH COVER
023LR3005A BUTTON-FUNC
023LR4002A KNOB-BOLT GUIDE
023LR4004A KNOB-TENSION
023LR4010A KNOB-LEVEL
026LR4006A FOOT
22
23
24
25
26
27
28
032LR3002A SHEET-FUNC
111LR4004A BOLT-CORE
29
30
111LR4006A BOLT-GUIDE
111LR4018A SCREW-H
31
32
112004001D NUT
33
120LR3004E SHAFT-FILM,L
120LR3031B SHAFT-CAM
34
35
120LR4008A SHAFT-TABLE
120LR4014C SHAFT-TAKE UP
12200X005A BEARING-TRUST NEEDLE
12200X009A DU BUSH
36
37
38
39
12200X022A BEARING-RADIAL TRUST
12200X027A DU BUSH
40
41
12200X028A DU BUSH
42
12200X029A DU BUSH
43
12200X030A DU BUSH
44
12200X032A DU BUSH
45
12200X034A DU BUSH
46
12200X040A DU BUSH
47
122LR4024A BUSH-ROLLER LAMI,UP
122LR4026A BUSH-ROLLER PULL,UP
122LR4042A BUSH-ROLLER LAMI,LO-LEFT
122LR4047A BUSH-ROLLER PULL,LO
122LR4050A BUSH-ROLLER LAMI,LO-RIGHT ASS'Y
124LR4005A CAM
48
49
50
51
52
53
124LR4006A 1"CORE
54
125LR4001A HANDLE-TENSION
125LR4003B LEVER-PRESSURE
55
56
125LR4004A SHAFT-TENSION
125LR4008A SUPPORT-SPRING
131LR4017A SPROCKET-LAMI
2
57
58
59
131LR4022B SPROCKET-DOUBLE
131LR4023A SPROCKET-TAKE UP
131LR4034A SPROCKET-MOTOR
133LR3001A ROLLER-LAMI
60
61
62
64
133LR3002A ROLLER-PULL
66
134LR4001A PULLEY-CHAIN
134LR4003A BUSH-PULLEY
67
68
136LR4001C CHAIN
69
136LR4001G CHAIN-2(TAKE UP)
138LR4001A SPRING-CUTTER CROSS
138LR4012A SPRING-TENSION
138LR4015A SPRING-PRESSURE
138LR4018A SPRING-LEVER
140LR3001A HOLDER-CUTTER,C
140LR4001A HOLDER-SHAFT FILM
140LR4021A HOLDER-SHAFT,T
141LP4018A BRACKET-T/FUSE
141LR3017A PLATE-PRESSURE,L
141LR3018A PLATE-PRESSURE,R
141LR4005A PLATE-SHAFT FILM
141LR4020A BRACKET-HEATER,LO-R
141LR4035A PLATE-DU BUSH
141LR4040A PLATE-SLIP
70
71
72
73
74
75
76
77
78
79
80
81
82
83
85
141LR4043A FRONT TABLE SAFETY LEVER
141LR4054A BRACKET-LIMIT SWITCH
141LR4059A BRACKET-SENSOR
141LR4060A PLATE-PRESSURE,LAMI
141LR4061A PLATE-PRESSURE,PULL
141LR4081A BRACKET-HEATER,LO-L
141LR4087A BRACKET-HEATER,UP
143LR3001A SUPPORTER-SHAFT
144LR4001B CLAMPER-LEVER
145LR3002A GUIDE-DOCUMENT
147LR4002A PAD-TENSION
86
87
88
89
90
91
92
93
94
95
96
147LR4010A PAD-TAKE UP
97
147LR4013A STOPPER-HEATER,UP
210004002A MOTOR-MAIN
98
100
101
101-1
102
103
104
105
106
107
108
109
110
111
112
113
113-1
113-2
114
115
116
118
119
120
121
122
123
124
125
126
126-1
127
128
129
130
131
132
132-1
132-2
132-3
133
134
135
136
137
213LR4001A CUTTER-CROSS
223LR3001H HEATER ASS'Y
223LR3001J HEATER ASS'Y
23200X001A SUPPORT-PCB
23300X001A BUSHING-CORD
32500X0008 FUSE-MAIN
34000S011A POWER TRANSFORMER
350LR3022A PCB-SUB ASS'Y
350LR3036C PCB-MAIN ASS'Y
363LP4013A BI-METAL UP
033LR4002A WASHER-BI METAL
36400X002B SWITCH-MAIN
36400X014B MICRO S/W
36600X001A FUSE-HOLDER
380LR4001A POWER CORD
380LR4003A POWER CORD
380LR4007A POWER CORD
381LR4013J WIRE-POWER S/W
381LR4020B WIRE-FUSE,EU
381LR4030D WIRE-UP HEATER1,EU
381LR4044B WIRE-MAIN
381LR4052A WIRE-MOTOR
381LR4054A WIRE-LO HEATER2,EU
381LR4055A WIRE-UP HEATER2,EU
381LR4084A WIRE-T/FUSE(UP)
381LR4091A WIRE-LO HEATER1,EU
381LR4092B WIRE-T/FUSE(LO)
443LR4001A L-WRENCH
ASMLR1339A ASM-AUTO GRIP FILM CORE 2"
ASMLR1339B ASM-AUTO GRIP FILM CORE3"
KPS03012D2 KEY-PLAIN
KPS05010D2 KEY-PLAIN
RC001200C8 SNAP-RING
RE001000C8 E-RING
RIV05018E8 RIVET
SKE04010D2 SET SCREW
SKE05006D2 SET SCREW
SKE05010D2 SET SCREW
SKE05015D2 SET SCREW
013LR4010A FRAME-GUIDE，R
013LR4011A FRAME-GUIDE，L
141LR4127A BRACKET-DECURLING BAR,R
141LR4128A BRACKET-DECURLING BAR,L
111LR4022A KNOB-GUIDE
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame - L
2
15
16
22
27
32
38
41
47
52
72
77
78
82
86
88
89
90
91
92
97
108
111
128
129
013LR2087A FRAME-L
021LR0001A COVER-L
021LR2008A COVER-TAKE UP,L
021LR4001A LIMIT SWITCH COVER
026LR4006A FOOT
112004001D NUT
12200X009A DU BUSH
12200X028A DU BUSH
122LR4024A BUSH-ROLLER LAMI,UP
124LR4005A CAM
138LR4015A SPRING-PRESSURE
141LP4018A BRACKET-T/FUSE
141LR3017A PLATE-PRESSURE,L
141LR4035A PLATE-DU BUSH
141LR4054A BRACKET-LIMIT SWITCH
141LR4060A PLATE-PRESSURE,LAMI
141LR4061A PLATE-PRESSURE,PULL
141LR4081A BRACKET-HEATER,LO-L
141LR4087A BRACKET-HEATER,UP
143LR3001A SUPPORTER-SHAFT
147LR4013A STOPPER-HEATER,UP
363LP4013A BI-METAL UP
36400X014B MICRO S/W
KPS05010D2 KEY-PLAIN
RC001200C8 SNAP-RING
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame - R
3
17
013LR2088A FRAME-R
021LR2013A COVER-TAKE UP,R
021LR3018A COVER-R
20
23
023LR3005A BUTTON-FUNC
023LR4004A KNOB-TENSION
023LR4010A KNOB-LEVEL
25
26
27
026LR4006A FOOT
37
12200X005A BEARING-TRUST NEEDLE
12200X022A BEARING-RADIAL TRUST
12200X028A DU BUSH
39
41
47
122LR4024A BUSH-ROLLER LAMI,UP
124LR4005A CAM
52
54
125LR4001A HANDLE-TENSION
125LR4003B LEVER-PRESSURE
125LR4004A SHAFT-TENSION 2
125LR4008A SUPPORT-SPRING
131LR4017A SPROCKET-LAMI
131LR4022B SPROCKET-DOUBLE
131LR4023A SPROCKET-TAKE UP
131LR4034A SPROCKET-MOTOR
134LR4001A PULLEY-CHAIN
134LR4003A BUSH-PULLEY
136LR4001C CHAIN
55
56
57
58
59
60
61
66
67
68
69
136LR4001G CHAIN-2(TAKE UP)
138LR4012A SPRING-TENSION
138LR4015A SPRING-PRESSURE
138LR4018A SPRING-LEVER
141LR3018A PLATE-PRESSURE,R
141LR4020A BRACKET-HEATER,LO-R
141LR4040A PLATE-SLIP
71
72
73
79
81
83
88
141LR4060A PLATE-PRESSURE,LAMI
141LR4061A PLATE-PRESSURE,PULL
141LR4087A BRACKET-HEATER,UP
144LR4001B CLAMPER-LEVER
147LR4010A PAD-TAKE UP
147LR4013A STOPPER-HEATER,UP
210004002A MOTOR-MAIN
89
91
93
96
97
98
104
106
109
112
125
127
128
130
132
132-1
132-2
132-3
32500X0008 FUSE-MAIN
350LR3022A PCB-SUB ASS'Y
033LR4002A WASHER-BI METAL
36600X001A FUSE-HOLDER
443LR4001A L-WRENCH
KPS03012D2 KEY-PLAIN
KPS05010D2 KEY-PLAIN
RE001000C8 E-RING
SKE04010D2 SET SCREW
SKE05006D2 SET SCREW
SKE05010D2 SET SCREW
SKE05015D2 SET SCREW
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame, Roller and Other View
1
2
013LR2012G FRAME-SENSOR
013LR2087A FRAME-L
3
013LR2088A FRAME-R
4
013LR3002H FRAME-CUTTER
013LR3035A FRAME-REAR
5
6
013LR3036A PLATE-MIDDLE
013LR3069A BASE-FRONT
7
8
013LR3070A BASE-REAR
9
013LR4004A FRAME-COVER SAFETY
014LR3001B TABLE-FRONT
015LR2010A IDLE BAR LOW
015LR3011B IDLE-BAR
10
11
12
13
015LR3012B SHAFT-DECURLING
021CR3001A KNOB-CUTTER,C
ASMLR1604A ASM-SENSOR
14
18
19
ASMLR1608A ASM-SENSOR
21
021LR3024A COVER-SAFETY
023LR4002A KNOB-BOLT GUIDE
026LR4006A FOOT
24
27
28
032LR3002A SHEET-FUNC
29
111LR4004A BOLT-CORE
30
111LR4006A BOLT-GUIDE
31
111LR4018A SCREW-H
32
112004001D NUT
33
120LR3004E SHAFT-FILM,L
120LR3031B SHAFT-CAM
34
35
120LR4008A SHAFT-TABLE
120LR4014C SHAFT-TAKE UP
12200X005A BEARING-TRUST NEEDLE
12200X027A DU BUSH
36
37
40
42
12200X029A DU BUSH
43
12200X030A DU BUSH
44
12200X032A DU BUSH
45
12200X034A DU BUSH
46
12200X040A DU BUSH
48
122LR4026A BUSH-ROLLER PULL,UP
122LR4042A BUSH-ROLLER LAMI,LO-LEFT
122LR4047A BUSH-ROLLER PULL,LO
122LR4050A BUSH-ROLLER LAMI,LO-RIGHT ASS'Y
124LR4006A 1"CORE
49
50
51
53
62
133LR3001A ROLLER-LAMI
133LR3002A ROLLER-PULL
138LR4001A SPRING-CUTTER CROSS
140LR3001A HOLDER-CUTTER,C
140LR4001A HOLDER-SHAFT FILM
140LR4021A HOLDER-SHAFT,T
141LR4005A PLATE-SHAFT FILM
141LR4043A FRONT TABLE SAFETY LEVER
141LR4059A BRACKET-SENSOR
145LR3002A GUIDE-DOCUMENT
147LR4002A PAD-TENSION
213LR4001A CUTTER-CROSS
223LR3001H HEATER ASS'Y
223LR3001J HEATER ASS'Y
23200X001A SUPPORT-PCB
23300X001A BUSHING-CORD
34000S011A POWER TRANSFORMER
350LR3036C PCB-MAIN ASS'Y
36400X002B SWITCH-MAIN
381LR4092B WIRE-T/FUSE(LO)
ASMLR1339A ASM-AUTO GRIP FILM CORE 2"
ASMLR1339B ASM-AUTO GRIP FILM CORE3"
RIV05018E8 RIVET
64
70
74
75
76
80
85
87
94
95
100
101
101-1
102
103
105
107
110
124
126
126-1
131
133
134
135
136
137
013LR4010A FRAME-GUIDE，R
013LR4011A FRAME-GUIDE，L
141LR4127A BRACKET-DECURLING BAR,R
141LR4128A BRACKET-DECURLING BAR,L
111LR4022A KNOB-GUIDE
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Wire, Front Table, Film Shaft
29
36
111LR4004A BOLT-CORE
120LR4014C SHAFT-TAKE UP
12200X034A DU BUSH
45
53
124LR4006A 1"CORE
113
113-1
113-2
114
115
116
118
119
120
121
122
123
125
126
126-1
380LR4001A POWER CORD
380LR4003A POWER CORD
380LR4007A POWER CORD
381LR4013J WIRE-POWER S/W
381LR4020B WIRE-FUSE,EU
381LR4030D WIRE-UP HEATER1,EU
381LR4044B WIRE-MAIN
381LR4052A WIRE-MOTOR
381LR4054A WIRE-LO HEATER2,EU
381LR4055A WIRE-UP HEATER2,EU
381LR4084A WIRE-T/FUSE(UP)
381LR4091A WIRE-LO HEATER1,EU
443LR4001A L-WRENCH
ASMLR1339A ASM-AUTO GRIP FILM CORE 2"
ASMLR1339B ASM-AUTO GRIP FILM CORE3"
131
RIV05018E8 RIVET
132
SKE04010D2 SET SCREW
SKE05006D2 SET SCREW
SKE05010D2 SET SCREW
SKE05015D2 SET SCREW
132-1
132-2
132-3
31
Download from Www.Somanuals.com. All Manuals Search And Download.
7. RSL-2702S,RSL-382S Wire Diagram
32
Download from Www.Somanuals.com. All Manuals Search And Download.
③
②
①
⑨
④
⑧
⑦
⑩
⑥
⑤
<Connect part>
1. Wire Main.
6. Wire Up Heater.
7. Wire Fan(2EA)
8. Wire Power Transformer In
9. Motor wires
2. Wire Sensor Up
3. Wire Sensor Low
4. Wire Power
5. Wire Low Heater
10. Wires Power Transformer Output
33
Download from Www.Somanuals.com. All Manuals Search And Download.
<SUB PCB and Frame-R Heater Layout>
Wire Up Heater
Bimetal(145℃)
Wire Up Sensor
Power Cord
Wire Bimetal
Fuse Main
Wire Lo Heater
SUB PCB
Motor
Power cord
Wire-Fuse
Wire power
34
Download from Www.Somanuals.com. All Manuals Search And Download.
<MICRO SWITCH and Frame-L Heater Layout>
Wire F/Fuse (133℃)
Wire Motor
Wire Safety S/W
Bimetal (130℃)
Wire F/Fuse (133℃)
Wire Bimetal
Safety Cover Micro S/W
Front Table Micro S/W
35
Download from Www.Somanuals.com. All Manuals Search And Download.
|