32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual
M3A-2154G52B
All information contained in these materials, including products and product specifications,
represents information on the product at the time of publication and is subject to change by
Renesas Technology Corp. without notice. Please review the latest information published
by Renesas Technology Corp. through various means, including the Renesas Technology
Corp. website (http://www.renesas.com).
Rev.1.40
Revision Date: Jan. 19, 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions on Using The Product Described Herein
1. The product described herein should be used in combination with the parts included with the
starter kit. If the product is operated in combination with any other item, its operation cannot be
guaranteed. Nor will requests for help or suggestion be answered.
2. The product described herein was prepared for program development or evaluation purposes.
The product cannot be used for the mass production.
3. Renesas Technology Corporation and Renesas Solutions Corporation will not assume any
responsibility for the results of development no matter what systems may have been
developed by customers by using the product described herein.
4. Guarantee for the product described herein shall conform to stipulations under which
guarantee is provided for the starter kit.
5. The product described herein was prepared assuming it will be used in a laboratory or similar
environment for program development or evaluation purposes. It is not covered in the
electrical product safety laws, nor is it protected against electromagnetic hazards for use in
Japan or elsewhere.
For Inquiries About Product Contents or This Manual
Please contact:
Renesas Technology Corporation
* Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other
countries.
* Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
* All other brand names and product names are trademarks or registered trademarks of each proprietary company.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Thank you very much for purchasing the 32185/32186/32192/32195/32196 Group Starter Kits,
the M3A-2154G52B.
This manual describes how to set up the hardware and software products included with the
32185/32186/32192/32195/32196 Group Starter Kit and the precautions to be observed when using
those products.
For details about the 32192/321296 or 32186 Group hardware and software products and
development support tools, refer to the user ’s manuals and related documentation supplied with
them.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Overview........................................................................................................................1
1.1
1.2
Outline of the Starter Kit...................................................................................................................... 1
System Configuration.......................................................................................................................... 2
2. Contents of the Product Package ..................................................................................3
2.1
2.2
2.3
Packaged Product Items..................................................................................................................... 3
Contents of CD-ROM.......................................................................................................................... 4
Other Necessary Items ....................................................................................................................... 4
3. Usage Precautions.........................................................................................................5
3.1
3.2
3.3
3.4
Guaranteed Scope of the Starter Kit................................................................................................... 5
Regarding About System Power-on Sequence when Connected to the Emulator............................. 5
About M3T-CC32R.............................................................................................................................. 5
About M3T-PD32RM........................................................................................................................... 6
3.4.1 Operating Manuals ........................................................................................................................ 6
3.4.2 About Break Operation .................................................................................................................. 6
3.4.3 About Security Code Check Function............................................................................................ 7
3.5
About Evaluation Board ...................................................................................................................... 8
3.5.1 Contact failure of IC Socket........................................................................................................... 8
3.5.2 Cable Connection .......................................................................................................................... 8
4. Starter Kit Usage Conditions..........................................................................................9
4.1
4.2
4.3
Ambient Conditions............................................................................................................................. 9
Host PC Condition............................................................................................................................... 9
Conditions for the Power Supply Used ............................................................................................... 9
5. Hardware Setup...........................................................................................................10
5.1
M3A-2154 Evaluation Board Hardware Setup.................................................................................. 10
5.1.1 M32100T-EZ-E Power Supply and Settings................................................................................ 10
5.1.2 M3A-2154 Evaluation Board Power Supply and Setting..............................................................11
5.1.3 Connecting M3A-2154 Evaluation Board and M32100T-EZ-E.....................................................11
5.1.4 Power Supply when Connecting M32100T-EZ-E.........................................................................11
5.2
Hardware Setup when the Evaluation Board by Itself in Use ........................................................... 12
5.2.1 M3A-2154 Evaluation Board Power Supply and Settings ........................................................... 12
5.2.2 M3A-2154 Power Supply............................................................................................................. 12
6. Software Setup ............................................................................................................13
6.1
M3T-PD32RM.................................................................................................................................... 13
6.1.1 Installing M3T-PD32RM............................................................................................................... 13
6.1.2 Starting M3T-PD32RM................................................................................................................. 14
6.1.3 Error Messages During M3T-PD32RM Startup ........................................................................... 16
6.1.4 Terminating M3T-PD32RM .......................................................................................................... 17
6.2
M3T-CC32R ...................................................................................................................................... 18
6.2.1 Installing M3T-CC32R.................................................................................................................. 18
6.2.2 Verifying Whether M3T-CC32R is Installed Normally.................................................................. 18
6.3
Browsing Electronic Manuals............................................................................................................ 18
Appendix 1 Contents of CD-ROM...................................................................................19
1. Contents of CD-ROM...................................................................................................19
1.1
1.2
1.3
1.4
1.5
Acrobat.............................................................................................................................................. 20
Tool.................................................................................................................................................... 21
Manual............................................................................................................................................... 24
Board Related Manual (Document) .................................................................................................. 25
Sample Program ............................................................................................................................... 30
CONTENTS-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix 2 Part List........................................................................................................31
Appendix 3 M3A-2154G02A Product Standards.............................................................33
1. Overview......................................................................................................................34
1.1
1.2
1.3
1.4
Outline of the Product ....................................................................................................................... 34
External View .................................................................................................................................... 35
Block Diagram................................................................................................................................... 36
Specifications of the Evaluation Board.............................................................................................. 37
1.4.1 Electrical Characteristics ............................................................................................................. 37
1.4.2 Functional Characteristics ........................................................................................................... 37
2. Functional Specifications .............................................................................................38
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
Configuration of the Power Supply ................................................................................................... 38
FP Select Circuit................................................................................................................................ 40
MOD Select Circuit............................................................................................................................ 41
Serial I/O Interface ............................................................................................................................ 42
Oscillator Circuit................................................................................................................................ 44
General-purpose Output Port LED Indicators................................................................................... 45
General-purpose Input Port Control Circuit....................................................................................... 46
Analog Port Input Control Circuit....................................................................................................... 48
CAN Interface.................................................................................................................................... 49
2.10 JTAG/NBD Interface.......................................................................................................................... 51
3. Reference Data............................................................................................................53
3.1
Jumper and Test Pin Lists................................................................................................................. 53
3.1.1 Jumpers ....................................................................................................................................... 53
3.1.2 Test Pins ...................................................................................................................................... 53
3.2
Extension Connectors CON1 and CON2.......................................................................................... 54
3.2.1 Pin Assignments of the Extension Connector CON1................................................................... 54
3.2.2 Pin Assignments of the Extension Connector CON2................................................................... 55
3.3
CAN Cable ........................................................................................................................................ 56
Connection Diagram ......................................................................................................................... 57
Part List ............................................................................................................................................. 64
Pattern Diagram................................................................................................................................ 69
Diagram of External Dimension ........................................................................................................ 76
Setting Jumper by Cutting Pattern.................................................................................................... 78
3.4
3.5
3.6
3.7
3.8
3.8.1 Cutting Pattern............................................................................................................................. 78
3.8.2 Jumper Shorting .......................................................................................................................... 78
3.9
Description of Board Silk................................................................................................................... 79
CONTENTS-2
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1. Overview
1.1 Outline of the Starter Kit
The M3A-2154G52B Starter Kit consists of M3A-2154G02A (32185/32186/32192/32195/32196
Group Evaluation Board; hereafter called the M3A-2154 Evaluation Board), M3T-PD32RM
(Emulator Debugger for M32100T-EZ-E) and M3T-CC32R (Cross Tool Kit for the M32R Family;
trial version).
This is an evaluation kit designed specifically for evaluating your computer at the early stage of
system development as well as developing application software for the 32185/32186/32192/32195/32
196 Group by using M32100T-EZ-E (Emulator for M32R).
M32100T-EZ-E should separately be prepared by the user.
It is capable of reprogramming internal flash memory of the 32185/32186/32192/32195/32196
Group microcomputer as well as controlling. Included M32100T-EZ-E and M3T-PD32RM enable
fast reprogramming MCU’s internal flash memory.
The following explains each item that constitutes the kits.
(1) M3A-2154G02A (M3A-2154 Evaluation Board)
The M3A-2154 Evaluation Board contains one of the 32185/32186/32192/32195/32196 Group
microcomputer of 32-bit and single-chip RISC with a socket, allowing you to evaluate a
microcomputer using the M32R core, internal memory, and peripheral I/O functions.
(2) M3T-CC32R (Cross Tool Kit)
The M3T-CC32R Cross Tool Kit, designed for use in developing application programs for the
M32R Family microcomputers, has abundant functions suitable for developing embedded control
systems using the M32R Family microcomputers. Included in the Starter Kit is a trial version of
it whose useful period is limited.
(3) M3T-PD32RM (Emulator Debugger)
M3T-PD32RM, the debugger software for the Starter Kit, enables debugging the application
system from the host PC by controlling the microcomputer on the M3A-2154 Evaluation Board
which is connected to the host PC via the M32100T-EZ-E emulator. You can analyze the operation
of a program available in load module form by using the M3T-CC32R Cross Tool Kit described
earlier. This debugger provides a man-machine interactive debugging environment based on
mouse manipulation by using a multi-window, graphical user interface comprised of easy to use
menus and multiple debugger windows and dialog boxes.
(Reference)
M32100T-EZ-E (Emulator for M32R)
The M32100T-EZ-E Emulator connects the host PC’s USB port and the M3A-2154 Evaluation
Board’s J TAG pin together, for controlling input/output between M3T-PD32RM and the
M3A-2154 Evaluation Boards
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 1 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.2 System Configuration
Figure 1.1 and Figure 1.2 below show system configurations of M3A-2154G52B connected to an
included emulator, and M3A-2154G02A by itself, respectively.
USB cable
(included with M32100T-EZ-E)
10-pin flat cable (included with M32100T-EZ-E)
XCN1
M3T-CC32R
M3T-PD32RM
M3A-2154G02A
(32185/32186/32192/
32195/32196 Group
evaluation board)
Host PC
CN2
M32100T-EZ-E
(Emulator for M32R:
required on the user side)
(required on the user side)
5V DC power supply
(required on the user side)
5V power supply cable
(included with a kit)
Figure 1.1 System Configuration of M3A-2154G52B Connected to an Included Emulator
XCN1
M3A-2154G02A
(32185/32186/32192/
32195/32196 Group
CN2
evaluation board)
5V DC power supply
(required on the user side)
5V power supply cable
(included with a kit)
Figure 1.2 System Configuration of M3A-2154G02A by Itself
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 2 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2. Contents of the Product Package
This chapter shows the contents of the Starter Kit product package. When unpacking, check to see
that all items are included with your package.
2.1 Packaged Product Items
Table 2.1 shows the contents of the Starter Kit product package.
Table 2.1 Packaged Contents of 32185/32186/32192/32195/32196 Group Starter Kit
Packaged product name
Outline of product
Quantity
1 pc.
32185/32186/32192/32195/32196 Group
Evaluation Board (hereafter called the M3A-2154
Evaluation Board)
M3A-2154G02A
M32186F8VFP
5V power supply cable
CAN cable
32186 Group microcomputer
Used for the M3A-2154 Evalution Board
CAN cable
1 pc.
1 pc.
2 pc.
1 pc.
CD-ROM
Contained documents and software
M32R/ECU Starter Kit
release note
M3A-2154G52B release notes
Written contract
1 copy
1 copy
IMPORTANT-READ ME FIRST
Note: When you unpack the Starter Kit, check to see that none of the above package contents is damaged or missing.
If any item is damaged or not included, return the package to Renesas Technology Corporation through
distributors. It will be replaced with a new one..
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 3 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.2 Contents of CD-ROM
The CD-ROM contains the software, manuals, various data sheets, and sample programs which are
needed for you to use the Starter Kit.
When using the technical contents of the CD-ROM such as product data, diagrams, and tables or
the programs and algorithms also included in the CD-ROM for your application, please be sure to
evaluate those technical contents, programs, and algorithms as the whole system, and not
individually as single items before you determine whether they are useful. Renesas Technology
Corporation will not assume any responsibility regarding their suitability for your application.
The following shows directory configurations of data/manuals included in the CD-ROM.
For details, refer to Appendix 1.
J pn/ Eng + Readme_j.txt/ Readme_e.txt : README file
+ AcrobatReader
+ Tool +
: Tool for read pdf file
: Software for the M32R Family
|
|
|
|
|
|
+ Cc32r
+ Pd32rm
+ Kd32r
+ Ufla32r
+ Oldversion
: Cross Tool Kit for the M32R Family (Trial version)
: Debugger for the M32R Family
: Debugger for the M32R Family
: Flash memory reprogramming kit for M32R/ECU by UART
: Old version of Tools
+ Document +
: Materials associated with boards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+ M3A-2114
: Materials associated with the 32170/32174/32171/32172/32173
Evaluation board (M3A-2114)
: Materials associated with the 32180/32182 Evaluation board
(M3A-2142)
: Materials associated with the 32176 Evaluation board
(M3A-2152)
: Materials associated with the 32185/32186/32192/32195/32196
Evaluation board (M3A-2154)
: Connector Pitch Converter for M3A-2114 Evaluation board
and M32100T-EZ-E
: Materials associated with the Emulator for M32R
: Manual for Flash memory reprogramming kit (Ufla32r)
+ M3A-2142
+ M3A-2152
+ M3A-2154
+ M3A-2191
+ M32100T-EZ-E
+ M3A-2145
+ Discontinued_model : Materials associated with the discontinued boards (M3A-2195)
+ Manual
|
: M32R/ECU manuals, data sheets, M32R Family
software manuals
+ SampleProgram
: Application notes and listed object/source files
2.3 Other Necessary Items
Before the Starter Kit can be used, the following items should separately be prepared by the user.
- Host PC (see Section 4.2 Host PC Condition)
- Power supply (see Section 4.3 Conditions for the Power Supply Used)
- M32100T-EZ-E (emulator for M32R)
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 4 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3. Usage Precautions
3.1 Guaranteed Scope of the Starter Kit
The Starter Kit was developed for users to trial the 32185/32186/32192/32195/32196 Group
microcomputer specifications and development environment. Therefore, the results arising from the
use of the Starter Kit are not guaranteed.
When developing/debugging a system product using one of the M32R Family microcomputers,
please be sure to use official development tools separately available as you debug.
The Starter Kit should be run on the designated type of host machine (IBM PC/AT compatibles).
This designated type of host machine, however, is just an anticipated operating environment for the
Starter Kit and does not mean that the Starter Kit operates properly on all relevant types of
machines in all relevant environments (e.g., device drivers and peripheral units).
3.2 Regarding About System Power-on Sequence when Connected to the Emulator
- When turning on power, turn on M32100T-EZ-E first and then the M3A-2154 Evaluation
Board.
- When turning off power, turn off the M3A-2154 Evaluation Board first and then M32100T-EZ-E
When turning on power again after turning off power, wait for 10 seconds.
- Power to M32100T-EZ-E can be fed from USB cable.
Note: Unless the Starter Kit is powered on this sequence, the kit may operate erratically or break down.
3.3 About M3T-CC32R
M3T-CC32R (M32R Family Cross Tool Kit) included with the Starter Kit is a trial version whose
useful period is limited.
This version becomes unusable four months after it is installed. Past this period, it cannot be used
even by reinstalling.
If you wish to continue using M3T-CC32R, please purchase a production version of M3T-CC32R
separately from distributors.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 5 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.4 About M3T-PD32RM
The following describes precautions to be observed when using M3T-PD32RM.
3.4.1 Operating Manuals
To use M3T-PD32RM of M3A-2154G52B, see the manuals shown below.
- M3T-PD32RM release notes
- PD32RM Help
3.4.2 About Break Operation
M3T-PD32RM uses the M32R core’s internal debug circuit (SDI) to realize break functions. For
this reason, the break functions of M3T-PD32RM behave differently from those in conventional
emulators.
Furthermore, because M3T-PD32RM does not have SDI trace pins as corresponding hardware
resources, the trace pin corresponding break functions available with M3T-PD32R-compatible
emulators are not supported.
The following explains the four types of breaks that can be executed with M3T-PD32RM.
(1) Software break
Up to 64 software breakpoints can be set and executed in RAM areas accessible by the target
MCU. No software breakpoints can be set and executed in ROM areas such as the internal flash
memory.
(2) Pre-execution PC break
The M32R core’s internal debug circuit (SDI) allows setting breakpoints, at which to break the
program immediately before executing an instruction (at the address indicated by the program
counter).
For the M3A-2154G52B (32185/32186/32192/32195/32196 Group MCU), four such breakpoints
can be set.
(3) Post-execution PC break
The M32R core’s internal debug circuit (SDI) allows setting one breakpoint, at which to break the
program immediately after executing an instruction (at the address indicated by the program
counter).
(4) Chip break
The M32R core’s internal debug circuit (SDI) allows setting breakpoints, at which to break the
program when accessing memory for read/write.
For M3A-2154G52B (32185/32186/32192/32195/32196 Group MCU), two such breakpoints (level
2) can be set.
* The differences between levels 1 and 2 are outlined below.
Level 1: Whether data which is maskable matches or not can be detected.
Level 2: Data is maskable and an address range can be specified for the target data.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 6 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(5) About hardware break
Debug functions of M3T-PD32RM are realized by using the M32R core’s internal debug circuit
(SDI), and not by using the emulator ’s hardware resources based on bus signals and debug
information from the MCU as in conventional emulators. The pre-execution PC break,
post-execution PC break, and chip break alluses this internal debug circuit (SDI).Because the
M3T-PD32RM does not have trace pin information available as hardware resources, the
hardware break functions cannot be used that use the trace pins implemented in the
M3T-PD32R-compatible emulators.
Heed this point when referring to the PD32RM Help.
3.4.3 About Security Code Check Function
If the target microcomputer has security code stored in it, the dialog box shown in Figure 3.1
appears at M3T-PD32RM startup. When this dialog box is displayed, enter the appropriate
security code. If the security code you’ve entered does not match the stored security code,
M3T-PD32RM will not start unless the contents of the internal flash memory are deleted.
Figure 3.1 Security Code Input Dialog Box
Be sure to enter the security code that you set when writing to the flash memory.
Use the Format select button to choose the format of the security code you entered. Select the
Save check box, and the security code you entered is saved. From next time on, the security code
saved here is used to check matching with the stored security code when M3T-PD32RM starts.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 7 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.5 About Evaluation Board
When the evaluation board does not start operation after supplied power, check the following
points.
3.5.1 Contact failure of IC Socket
Oscillation or thermal expansion may cause a poor connection between microcomputers and IC
socket on the Evaluation Board. Follow the steps below.
- Screw down the top cover of IC socket with setscrews at four corners.
The tightening torque shall be 0.054N.m.
Note that only one tight setscrew may cause a poor connection.
The socket included in the evaluation board uses NQPACK and HQPACK by TOKYO ELETECH
CORPORATION.
The following illustrates configuration of M3A-2154G02A (32185/32186/32192/32195/32196
Group Evaluation Board).
IC socket (HQPACK)
Setscrews on cover
of IC socket
32185/32186/32192/32195/32196 Group evaluation board M3A-2154G02A
Figure 3.2 Configuration of M3A-2154G02A
3.5.2 Cable Connection
- Make sure the cables are connected to the evaluation board firmly.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 8 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
4. Starter Kit Usage Conditions
The following shows the conditions under which the Starter Kit can be used.
4.1 Ambient Conditions
Table 4.1 shows the ambient conditions under which the Starter Kit can be used.
Table 4.1 Operating Environment
Symbol
Topr
Tstr
Parameter
Operating ambient temperature
Storage ambient temperature
Rated value
5oC to 35oC
0oC to 60oC
Remarks
No dewdrops allowed. Corrosive
gas environment not allowed.
4.2 Host PC Condition
It is recommended that each software included with the Starter Kit be run on the host PC under
the OS listed in Table 4.2.
Table 4.2 Host PC Conditions
Starter Kit Type Name
M3A-2154G52B
Host PC
CPU
IBM PC/AT compatibles
Pentium III 500MHz or higher CPU is recommended
192 Mbytes or more system memory is recommended
Windows 98, Me, 2000, XP
Memory
OS
USB Port
1 port (required)
4.3 Conditions for the Power Supply Used
Table 4.3 shows Power Supply Specifications required when using the Starter Kit.
Table 4.3 Power Supply Specifications
Symbol
VCC
Power supply voltage
4.75 V to 5.25 V
Power supply current
1A
—
GND
0V (reference voltage)
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 9 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
5. Hardware Setup
This chapter describes how to set up the hardware components necessary to use the Starter Kit.
Table 5.1 and Table 5.2 show how to set up the hardware components.
Table 5.1 Hardware Setup Procedure
When using the evaluation
Setup Procedure
When connected to the emulator
board by itself
Set the emulator
1st (Refer to 5.1.1)
2nd (Refer to 5.1.1)
3rd (Refer to 5.1.2)
—
Connect the host PC and emulator
Set the evaluation board
—
1st (Refer to 5.3.1)
Connect the evaluation board and
emulator
4th (Refer to 5.1.3)
—
Turn on the emulator
5th (Refer to 5.1.4)
—
Turn on the evalution board
6th (Refer to 5.1.4)
2nd (Refer to 5.3.2)
Table 5.2 Hardware Power Off Procedure
Setup Procedure
When using the evaluation
board by itself
When connected to the emulator
Turn off the evaluation board.
Turn off the emulator.
1st (Refer to 5.1.4)
1st (Refer to 5.3.2)
2nd (Refer to 5.1.4)
—
5.1 M3A-2154 Evaluation Board Hardware Setup
5.1.1 M32100T-EZ-E Power Supply and Settings
The following shows how to set M32100T-EZ-E.
For more details, refer to M32100T-EZ-E User ’s Manual.
M32100T-EZ-E is supplied power from the host PC via USB cable, and it turns ON by connecting
included USB cable.
The Connecting M32100T-EZ-E and Host PC is shown in Figure 5.1
USB I/F
USB cable
Connect to the host
PC’s USB port
M32100T-EZ-E
Figure 5.1 Connecting M32100T-EZ-E and Host PC
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 10 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
5.1.2 M3A-2154 Evaluation Board Power Supply and Setting
The following shows how to set the M3A-2154 Evaluation Board.
Use a 5V DC power supply to feed power to the M3A-2154 Evaluation Board.
Use included 5V power supply cable to connect the 5V DC power supply and CN2 connector
included with the M3A-2154 Evaluation Board.
The Connecting when Feeding Power to the M3A-2154 Evaluation Board is shown in Figure 5.2.
M3A-2154 evaluation board
CN2
4.75-5.25V DC power supply
Figure 5.2 Connecting when Feeding Power to the M3A-2154 Evaluation Board
5.1.3 Connecting M3A-2154 Evaluation Board and M32100T-EZ-E
Use an included 10-pin flat cable to connect M32100T-EZ-E and XCN1 connector included with
the M3A-2154 Evaluation Board.
The Connecting M3A-2154 Evaluation Board and M32100T-EZ-E is shown in Figure 5.3.
SDI I/F
10-pin flat cable
M32100T-EZ-E
XCN1
M3A-2154 evaluation board
Figure 5.3 Connecting M3A-2154 Evaluation Board and M32100T-EZ-E
5.1.4 Power Supply when Connecting M32100T-EZ-E
- When turning on power, turn on M32100T-EZ-E first and then the M3A-2154 Evaluation
Board.
- When turning off power, turn off the M3A-2154 Evaluation Board first and then
M32100T-EZ-E.
When turning on power again after turning off power, wait for 10 seconds.
- Power to M32100T-EZ-E can be fed from USB cable.
Note: Unless the Starter Kit is powered on this sequence, the kit may operate erratically or break down.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 11 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
5.2 Hardware Setup when the Evaluation Board by Itself in Use
5.2.1 M3A-2154 Evaluation Board Power Supply and Settings
The following shows how to set the M3A-2154 Evaluation Board.
Use a 5V DC power supply to feed power to the M3A-2154 Evaluation Board.
Use an included 5V power supply cable to connect the 5V DC power supply and CN2 connector
included with the M3A-2154 Evaluation Board.
The Connecting when Feeding Power to the M3A-2154 Evaluation Board is shown in Figure 5.4
M3A-2154 evaluation board
CN2
4.75-5.25V DC power supply
Figure 5.4 Connecting when Feeding Power to the M3A-2154 Evaluation Board
5.2.2 M3A-2154 Power Supply
Connecting the 5V power supply with the included cable turns the M3A-2154 Evaluation Board
powered on.
By disconnecting it, the M3A-2154 Evaluation Board turns powered off.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 12 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
6. Software Setup
6.1 M3T-PD32RM
M3T-PD32RM is the debugger software that controls M32100T-EZ-E from the host PC.
6.1.1 Installing M3T-PD32RM
[Notes]
Make sure that the installer is executed by one who is authorized as an Administrator when
Windows 2000/XP is used as an operating system of the host machine.
No one but the user who has the authority of an Administrator can install M3T-PD32RM.
(1) Run pd32rmv301r00_e.exe that is included in the Eng \ Tool \ Pd32rm directory of the CD-ROM.
(2) Proceed to install M3T-PD32RM following messages on the installation screen.
(3) When you finished installing M3T-PD32RM, the dialog box shown in Figure 6.1 appears.
Figure 6.1 Dialog Box when Installation is Finished
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 13 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
6.1.2 Starting M3T-PD32RM
Before starting M3T-PD32RM, make sure the hardware components have been set up in
accordance with the instructions in 5.1 M3A-2154 Evaluation Board Hardware Setup, and that
the Starter Kit hardware system (M3A-2154 Evaluation Board and M32100T-EZ-E) have been
powered on. Make sure that M3T-PD32RM cannot be started unless the power to the hardware
system is turned on.
To start M3T-PD32RM, choose
[Start] -> [Programs] -> [Renesas] -> [PD32RM V3.01 Release 00] -> [PD32RM]
from Start menu of Windows. When M3T-PD32RM starts, the initialize dialog box shown in
Figure 6.2 appears. So initialize M3T-PD32RM from this dialog box.
Cancel
Help
Figure 6.2 M3T-PD32RM Initialize Dialog Box
Setting MCU File
Click the MCU tab in the initialize dialog box (see Figure 6.2) and then the “Refer” button. This
brings up a dialog box for setting MCU files. In this dialog box, select the MCU file described
below.
Table 6.1 MCU File
MCU group name
MCU file name
32185.mcu
32186.mcu
32192.mcu
32195.mcu
32196.mcu
32185
32186
32192
32195
32196
This MCU file is stored in directory: (installed location) \ PD32RM \ MCUFILES.
Setting Model
While the MCU tab is open, select the appropriate MCU type from Model selection.
Setting Mode
While the MCU tab is open, select the appropriate MCU operation mode from Mode selection.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 14 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Setting CPU Clock
Case of using 32192 or 32195 or 32196 Group, while the MCU tab is open, select the “160” for the
appropriate CPU Clock.
Case of using 32185 or 32186 Group, while the MCU tab is open, select the “80” for the
appropriate CPU Clock.
Checking Serial No.
While the MCU tab is open, make sure the Serial No. is in accordance with the following.
M3T-PD32RM can be started only with Serial No. as follows:
Table 6.2 Serial No.
MCU group
Serial No. for using M3T-PD32RM
Example of serial No.
- 5AE0670
- 5AE0670 (32185)
- 5AE0670
- 5AE0670 (32186)
- 5AE0670
- 5AE0670 (32192)
- 5AE0670
- 5AE0670 (32195)
- 5AE0670
name
7-digit serial number
7-digit serial number (32185) (Note 1)
7-digit serial number
7-digit serial number (32186) (Note 1)
7-digit serial number
7-digit serial number (32192) (Note 1)
7-digit serial number
7-digit serial number (32195) (Note 1)
7-digit serial number
7-digit serial number (32196) (Note 1)
32185
32186
32192
32195
32196
- 5AE0670 (32196)
Note 1: The number in parenthesis after 7 digits serial number shows MCU Group name with activation of M3T-PD32RM.
Selecting a Cross Tool
While the Debugging Information tab is open, select “CC32R(M32R)” for Compiler.
For the Starter Kit, M3T-CC32R is the only cross tool which has had its operation guaranteed.
Help
Figure 6.3 Selecting a Cross Tool
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 15 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
When you have finished the above initialization, click the “OK” button to start M3T-PD32RM.
If M3T-PD32RM communicates normally with the target system, it starts up and the
M3T-PD32RM window shown in Figure 6.4 appears. For details on how to use it, refer to the
PD32RM Help.
Figure 6.4 M3T-PD32RM Window at Normal Startup
6.1.3 Error Messages During M3T-PD32RM Startup
If M3T-PD32RM cannot communicate normally with the target system, it appears an error
message in a pop-up box.
Causes of Errors on the M3A-2154 Evaluation Board
If the error pop-up box shown in Figure 6.5 appears when starting M3T-PD32RM, check whether
power is supplied to the M3A-2154 Evaluation Board and whether it is firmly connected to
M32100T-EZ-E.
ERROR11473: Target MCU is not under control.
Please reset target systems.
Figure 6.5 Error Message at Startup (Error on the M3A-2154 Evaluation Board Side)
If the error pop-up box is appeared when starting M3T-PD32RM, correct the cause of error and
then click the “OK” button in that pop-up box. This brings up the initialize window, allowing you
to retry the startup. In this case, you can retry only once.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 16 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
6.1.4 Terminating M3T-PD32RM
To terminate M3T-PD32RM, choose [File] -> [Exit] from the pulldown menu. Then, a dialog box
appears prompting you for your confirmation (see Figure 6.6). Click the “OK” button in that
dialog box to quit M3T-PD32RM. Or click the “Cancel” button, in which case M3T-PD32RM does
not terminate.
Cancel
Figure 6.6 Dialog Box for Confirming Whether to Quit M3T-PD32RM
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 17 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
6.2 M3T-CC32R
6.2.1 Installing M3T-CC32R
(1) Run cc32rv500r00_e.exe that is included in the Eng \ Tool \ Cc32r directory of the CD-ROM.
(2) Proceed to install M3T-CC32R following messages on the installation screen.
(3) When you are asked to select the license type of M3T-CC32R, select “Trial License”.
(4) While installing M3T-CC32R, you will be asked to confirm whether to change AUTOEXEC.BAT
variables. If you chose “Not to Change”, add the following contents to AUTOEXEC.BAT.
(Setting example for M3T-CC32R environment variables)
REM *********** Environment variables for CC32R ****************
SET M32RBIN = (installed directory) ¥ bin32R
SET M32RLIB = (installed directory) ¥ lib32R
SET M32RINC = (installed directory) ¥ inc32R
SET M32RTMP = (installed directory) ¥ TMP
SET PATH=%M32RBIN%;%PATH%
(5) If you corrected AUTOEXEC.BAT, be sure to restart your computer after you finished installing
M3T-CC32R.
6.2.2 Verifying Whether M3T-CC32R is Installed Normally
Execute the following operation from the DOS prompt. This helps to verify whether M3T-CC32R
has been installed normally. For details about M3T-CC32R, refer to the CC32R User ’s Manual.
- Command
C: \ >cc32r -V (V in uppercase)
- Result
If M3T-CC32R has been installed normally, a command version of M3T-CC32R like the one
shown below is displayed.
CC32R Compiler for M32R Family V.X.XX Release X
Copyright 1995-XXXX RENESAS TECHNOLOGY CORPORATION
AND RENESAS SOLUTIONS CORPORATION
ALL RIGHTS RESERVED.
(X varies with the version of the Cross Tool Kit included in the package.)
Displayed below this is the version information of each tool included in the Cross Tool Kit.
- If M3T-CC32R does not start
If M3T-CC32R does not start, check the following.
1) See if the environmental variables (M32RBIN, M32LIB, M32RINC, M32RTMP command
paths) are set correctly.
2) See if cc32r.exe is correctly expanded in the directory specified in M32RBIN.
6.3 Browsing Electronic Manuals
The Starter Kit manuals each are provided as Portable Document Format (PDF) files.
To browse electronic manuals, you need to have Acrobat Reader. The CD-ROM supplied with the
Starter Kit contains Acrobat Reader in its Acrobat directory, so install the desired version of
Acrobat Reader from the CD-ROM. Acrobat Reader can also be downloaded from the Adobe Systems
home page.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 18 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Appendix 1 Contents of CD-ROM
1. Contents of CD-ROM
The CD-ROM contains the software, manuals, various data sheets, and sample programs which are
needed for you to use the Starter Kit.
When using the technical contents of the CD-ROM such as product data, diagrams, and tables or the
programs and algorithms also included in the CD-ROM for your application, please be sure to
evaluate those technical contents, programs, and algorithms as the whole system, and not
individually as single items before you determine whether they are useful. Renesas Technology
Corporation will not assume any responsibility regarding their suitability for your application.
The following shows directory configurations and contents of the CD-ROM.
J pn/ Eng + Readme_j.txt/ Readme_e.txt : README file
+ AcrobatReader
+ Tool +
: Tool for read pdf file
: Software for the M32R Family
|
|
|
|
|
|
+ Cc32r
+ Pd32rm
+ Kd32r
+ Ufla32r
+ Oldversion
: Cross Tool Kit for the M32R Family (Trial version)
: Debugger for the M32R Family
: Debugger for the M32R Family
: Flash memory reprogramming kit for M32R/ECU by UART
: Old version of Tools
+ Document +
: Materials associated with boards
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+ M3A-2114
: Materials associated with the 32170/32174/32171/32172/32173
Evaluation board (M3A-2114)
: Materials associated with the 32180/32182 Evaluation board
(M3A-2142)
: Materials associated with the 32176 Evaluation board
(M3A-2152)
: Materials associated with the 32185/32186/32192/32195/32196
Evaluation board (M3A-2154)
: Connector Pitch Converter for M3A-2114 Evaluation board
and M32100T-EZ-E
: Materials associated with the Emulator for M32R
: Manual for Flash memory reprogramming kit (Ufla32r)
+ M3A-2142
+ M3A-2152
+ M3A-2154
+ M3A-2191
+ M32100T-EZ-E
+ M3A-2145
+ Discontinued_model : Materials associated with the discontinued boards (M3A-2195)
+ Manual
|
: M32R/ECU manuals, data sheets, M32R Family
software manuals
+ SampleProgram
: Application notes and listed object/source files
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 19 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.1 Acrobat
The CD-ROM contains files necessary to read manuals (PDF files). The documents included in the
CD-ROM have been verified to be displayed and printed using the following versions of Acrobat. If
you have trouble displaying or printing documents with other Acrobat versions, install the
appropriate Acrobat version from the CD-ROM into your computer.
(English version)
Eng + AcrobatReader + V3 + (For Windows95)
|
|
+ Ar32e301.EXE
+ Readme.txt
: PDF reader installation software
: README file
+ V4 + (For Version4)
|
|
+ ArR0ENG.EXE
+ Readme.txt
: PDF reader installation software
: README file
+ Win16e + (For Windows3.1)
+ AR16E301.EXE
: PDF reader installation software
: README file
+ Readme.txt
(J apanese version)
J pn + AcrobatReader + AR40J PN.EXE
+ Readme.txt
: PDF reader installation software
: README file
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 20 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.2 Tool
(1) M3T-CC32R
M3T-CC32R (Cross Tool Kit for the M32R Family, trial version whose useful period is limited) is
included. Its directory structure is shown below.
(English version)
Eng+Tool+Cc32r+
+ cc32rv500r00_e.exe
: Setup programs for M3T-CC32R
+ rej10j0931_as32r_u.pdf : M3T-CC32R user ’s manual (Assembler)
+ rej10j0930_cc32r_u.pdf : M3T-CC32R user ’s manual (C Compiler)
+ mapue.pdf
: MAP Viewer user ’s manual
(J apanese version)
J pn+Tool+Cc32r+
+ cc32rv500r00_j.exe
+ as32ruj.pdf
+ cc32ruj.pdf
: Setup programs for M3T-CC32R
: M3T-CC32R user ’s manual (Assembler)
: M3T-CC32R user ’s manual (C Compiler)
: MAP Viewer user ’s manual
+ mapuj.pdf
(2) M3T-PD32RM
M3T-PD32RM (Debugger for M32100T-EZ-E) is included. This debugger software
(Windows-compliant version) is used to control the microcomputer on the evaluation board from
the host PC by connecting M32100T-EZ-E and the host PC with USB cable.
Its directory structure is shown below.
(English version)
Eng+Tool+Pd32rm+
+ pd32rmv301r00_e.exe
: Setup programs for M3T-PD32RM
+ rej10j1494_pd32rm_n.pdf: M3T-PD32RM release note
(J apanese version)
J pn+Tool+Pd32rm+
+ pd32rmv301r00_j.exe
: Setup programs for M3T-PD32RM
+ rjj10j1800_pd32rm_n.pdf : M3T-PD32RM release note
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 21 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(3) M3S-KD32R (Discontinued)
M3S-KD32R (Debugger for the Starter Kit) is included. This debugger software (Windows
-compliant version) is used to control the microcomputer on the evaluation board from the host
PC by connecting it and the host PC with LPT parallel cable through the M3A-2195 (SDI
Interface Board). Its directory structure is shown below.
(English version)
Eng+Tool+Kd32r+
+ KD32RNE.pdf
+ W95E
: M3S-KD32R release note
: Setup programs for M3S-KD32R
(J apanese version)
J pn+Tool+Kd32r+
+ KD32RNJ .pdf
+ W95J
: M3S-KD32R release note
: Setup programs for M3S-KD32R
(4) M3S-UFLA32R
M3S-UFLA32R is included. M3S-UFLA32R is the software to program into internal flash
memory on M32R/ECU series 3217x,3218x Group microcomputers from Windows version
personal computer(PC/AT), by using UART communication. Its directory structure is shown
below.
(English version)
Eng+Tool+Ufla32r+
+ UFLA32Rue.pdf : M3S-UFLA32R user ’s manual
+ W95E
: Setup programs for M3S-UFLA32R
(J apanese version)
J pn+Tool+Ufla32r+
+ UFLA32Ruj.pdf : M3S-UFLA32R user ’s manual
+ W95J
: Setup programs for M3S-UFLA32R
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 22 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(5) Oldversion
Old versions of tools are included.
Its directory structure is shown below.
(English version)
Eng+Tool+Oldversion+
+ Cc32rv3
+ Cc32rv41
+ Cc32rv42
+ Cc32rv43
: Objects for M3T-CC32R Version 3
: Objects for M3T-CC32R Version 4.1
: Objects for M3T-CC32R Version 4.2
: Objects for M3T-CC32R Version 4.3
+ Pd32rmv2 : Objects for M3T-PD32RM Version 2
+ Pd32rmv21 : Objects for M3T-PD32RM Version 2.1
+ Pd32rmv3 : Objects for M3T-PD32RM Version 3
+ Kd32rv3
: Objects for M3S-KD32R Version 3
(J apanese version)
J pn+Tool+Oldversion+
+ Cc32rv3
: Objects for M3T-CC32R Version 3
: Objects for M3T-CC32R Version 4.1
: Objects for M3T-CC32R Version 4.2
: Objects for M3T-CC32R Version 4.3
+ Cc32rv41
+ Cc32rv42
+ Cc32rv43
+ Pd32rmv2 : Objects for M3T-PD32RM Version 2
+ Pd32rmv21 : Objects for M3T-PD32RM Version 2.1
+ Pd32rmv3 : Objects for M3T-PD32RM Version 3
+ Kd32rv3
: Objects for M3S-KD32R Version 3
+ Ufla32rv13 : Objects for M3S-UFLA32R Version 1.3
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 23 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.3 Manual
The M32R Family related manuals and data sheets are included in PDF file format.
(English version)
Eng + Manual +
+ Readme_e.txt
: README file
+ e32rsm.pdf
+ rej09b0112_32fpusm.pdf
: M32R Family software manual
: M32R-FPU software manual
+ e32170um.pdf
+ e32172um.pdf
+ rej06b0048_32180um.pdf
+ rej09b0014_32182um.pdf
+ rej09b0015_32171um.pdf
: 32170/32174 Group user ’s manual
: 32172/32173 Group user ’s manual
: 32180 Group user ’s manual
: 32182 Group user ’s manual
: 32171 Group user ’s manual
+ rej09b0067-0110_32176hm.pdf : 32176 Group hardware manual
+ rej09b0123-0101_32192hm.pdf : 32192/32196 Group hardware manual
+ rej09b0235_32186hm.pdf
: 32186 Group hardware manual
(J apanese version)
J pn + Manual +
+ Readme_j.txt
: README file
+ j32rsm.pdf
+ rjj09b0107_32fpusm.pdf
+ rjj09b0123_32176no.pdf
: M32R Family software manual
: M32R-FPU software manual
: 32176 Group precautions
+ j32170um.pdf
+ j32171um.pdf
: 32170/32174 Group user ’s manual
: 32171 Group user ’s manual
+ j32172um.pdf
+ j32180um.pdf
: 32172/32173 Group user ’s manual
: 32180 Group user ’s manual
+ rjj09b0001_32176um.pdf
+ rjj09b0053_32182um.pdf
+ rjj09b0099_32192hm.pdf
: 32176 Group user ’s manual
: 32182 Group user ’s manual
: 32192/32195/32196 Group hardware manual
+ rjj09b0246-0100_32186hm.pdf : 32186 Group hardware manual
+ 32470210j.pdf
+ 32580401j.pdf
+ 32590401j.pdf
+ 32630402j.pdf
+ 32680404j.pdf
+ tn32ra074aj.pdf
: Errata table for 32182 Group user ’s manual
: Errata table for 32170/32174 Group user’s manual
: Errata table for 32171 Group user ’s manual
: Errata table for 32180 Group user ’s manual
: Errata table for 32172/32173 Group user’s manual
: Errata table for 32186 Group user ’s manual
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 24 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.4 Board Related Manual (Document)
The product standards, part list, connection diagrams and user ’s manuals for the evaluation board
in Starter Kit are included in PDF file format.
(1) M3A-2114 Evaluation Board related documents
The related documents for the 32170/32171/32172/32173/32174 Group Evaluation Board are
included in PDF file format.
(English version)
Eng+Document+M3A-2114+
+ Readme_e.txt
: README file
+ 2114um_e.pdf : M3A-2114 Starter Kit use’s manual
+ 2114g02sk_e.pdf : M3A-2114G02 product standards
+ 2114g12sk_e.pdf : M3A-2114G12 product standards
+ 2114g22sk_e.pdf : M3A-2114G22 product standards
+ cdrom_e.pdf
: Content list of CD-ROM
(J apanese version)
J pn+Document+M3A-2114+
+ Readme_j.txt
+ 2114um_j.pdf
: README file
: M3A-2114 Starter Kit use’s manual
+ 2114g02sk_j.pdf : M3A-2114G02 product standards
+ 2114g12sk_j.pdf : M3A-2114G12 product standards
+ 2114g22sk_j.pdf : M3A-2114G22 product standards
+ cdrom_j.pdf
: Content list of CD-ROM
(2) M3A-2142 Evaluation Board related documents
The related documents for the function extension board and the 32180/32182 Group Evaluation
Board are included in PDF file format.
(English version)
Eng+Document+M3A-2142+
+ Readme_e.txt
: README file
+ 2142um_e.pdf : M3A-2142 Starter Kit use’s manual
+ 2142g01sk_e.pdf : M3A-2142G01 product standards
+ 2142g03sk_e.pdf : M3A-2142G03 product standards
+ cdrom_e.pdf
: Content list of CD-ROM
(J apanese version)
J pn+Document+M3A-2142+
+ Readme_j.txt
+ 2142um_j.pdf
: README file
: M3A-2142 Starter Kit use’s manual
+ 2142g01sk_j.pdf : M3A-2142G01 product standards
+ 2142g03sk_j.pdf : M3A-2142G03 product standards
+ cdrom_j.pdf
: Content list of CD-ROM
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 25 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(3) M3A-2152 Evaluation Board related documents
The related documents for the 32176 Group Evaluation Board are included in PDF file format.
(English version)
Eng+Document+M3A-2152+
+ Readme_e.txt
: README file
+ rej10b0224_2152um.pdf
: M3A-2152 Starter Kit use’s manual
(J apanese version)
J pn+Document+M3A-2152+
+ Readme_j.txt
+ rjj10b0233_2152um.pdf
: README file
: M3A-2152 Starter Kit use’s manual
(4) M3A-2154 Evaluation Board related documents
The related documents for the 32185/32186/32192/32195/32196 Group Evaluation Board are
included in PDF file format.
(English version)
Eng+Document+M3A-2154+
+ Readme_e.txt
: README file
+ rej10b0223_2154um.pdf
: M3A-2154 Starter Kit use’s manual
(J apanese version)
J pn+Document+M3A-2154+
+ Readme_j.txt
+ rjj10b0231_2154um.pdf
: README file
: M3A-2154 Starter Kit use’s manual
(5) M32100T-EZ-E related documents
M32100T-EZ-E documents are included in PDF file format.
(English version)
Eng+Document+M32100T-EZ-E+
+ Readme_e.txt
: README file
+ rej10j0002_m32100teze_u.pdf : M32100T-EZ-E use’s manual
+ rej10j0013_m32100teze_s.pdf : M32100T-EZ-E release note
(J apanese version)
J pn+Document+M32100T-EZ-E+
+ Readme_j.txt
: README file
+ rjj10j0002_m32100teze_u.pdf : M32100T-EZ-E use’s manual
+ rjj10j0014_m32100teze_s.pdf : M32100T-EZ-E release note
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 26 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(6) M3A-2191 Pitch Converter related documents
The M3A-2114 Evaluation Board and M3A-2195 Interface Board connecting pitch converter
related documents are included in PDF file format.
(English version)
Eng+Document+M3A-2191+
+ Readme_e.txt
: README file
+ rej10b0228_2191sk.pdf
+ cdrom_e.pdf
: M3A-2191 product standards
: Content list of CD-ROM
(J apanese version)
J pn+Document+M3A-2191+
+ Readme_j.txt
: README file
+ rjj10b0237_2191sk.pdf
+ cdrom_j.pdf
: M3A-2191 product standards
: Content list of CD-ROM
(7) M3A-2145 Evaluation Board related documents
The related documents for the M3S-UFLA32R are included in PDF file format.
(English version)
Eng+Document+M3A-2145+
+ Readme_e.txt
: README file
+ 2145g50sk_e.pdf : M3A-2145G50 product standards
+ 2145g02sk_e.pdf : M3A-2145G02 product standards
+ 2145g50p_e.pdf : M3A-2145G50 part list
+ 2145g02p_e.pdf : M3A-2145G02 part list
+ cdrom_e.pdf
: Content list of CD-ROM
(J apanese version)
J pn+Document+M3A-2145+
+ Readme_j.txt
: README file
+ 2145g50sk_j.pdf : M3A-2145G50 product standards
+ 2145g02sk_j.pdf : M3A-2145G02 product standards
+ 2145g50p_j.pdf : M3A-2145G50 part list
+ 2145g02p_j.pdf : M3A-2145G02 part list
+ cdrom_j.pdf
: Content list of CD-ROM
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 27 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(8) M3A-2195 SDI Interface Board related documents (Discontinued)
The SDI Interface Board documents are included in PDF file format.
(English version)
Eng+Document+Discontinued_model+M3A-2195+
+ Readme_e.txt
: README file
+ 2195g50sk_e.pdf : M3A-2195G50 product standards
+ 2195c_e.pdf
+ 2195p_e.pdf
: M3A-2195 Evaluation Board connection diagram
: M3A-2195 part list
+ 2195g50p_e.pdf : M3A-2195G50 part list
+ 2195um_e.pdf : M3A-2195 user ’s manual
+ cdrom_e.pdf
: Content list of CD-ROM
(J apanese version)
J pn+Document+Discontinued_model+M3A-2195+
+ Readme_j.txt
: README file
+ 2195g50sk_j.pdf : M3A-2195G50 product standards
+ 2195c_j.pdf
+ 2195p_j.pdf
: M3A-2195 Evaluation Board connection diagram
: M3A-2195 part list
+ 2195g50p_j.pdf : M3A-2195G50 part list
+ 2195um_j.pdf
+ cdrom_j.pdf
: M3A-2195 user ’s manual
: Content list of CD-ROM
(9) M3A-2128 Evaluation Board related documents (Discontinued)
The related documents for the 32170 Group Evaluation Board are included in PDF file format.
(J apanese version)
J pn+Document+Discontinued_model+M3A-2128+
+ Readme_j.txt : README file
+ 2128im_j.pdf : M3A-2128 installation manual
+ 2128um_j.pdf : M3A-2128 Starter Kit user ’s manual
+ 2128sk_j.pdf : M3A-2128 product standards
+ 2128g50p_j.pdf : M3A-2128G50 part list
+ cdrom_j.pdf
: Content list of CD-ROM
(10) M3A-2154 Evaluation Board related documents (Discontinued)
The related documents for the 32192 Group Evaluation Board are included in PDF file format.
(English version)
Eng+Document+Discontinued_model+M3A-2154G52A+
+ Readme_e.txt
: README file
+ 2154g52aum_e.pdf : M3A-2154 Starter Kit user ’s manual
+ 2154g02sk_e.pdf : M3A-2154G02 product standards
(J apanese version)
J pn+Document+Discontinued_model+M3A-2154G52A+
+ Readme_j.txt
: README file
+ 2154g52aum_j.pdf : M3A-2154 Starter Kit user ’s manual
+ 2154g02sk_j.pdf
: M3A-2154G02 product standards
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 28 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
(11) M3A-2142G04 Board related documents (Discontinued)
The related documents for the MCU pin processing Board are included in PDF file format.
(English version)
Eng+Document+Discontinued_model+M3A-2142G04+
+ Readme_e.txt
+ 2142g04sk_e.pdf : M3A-2142G04 product standards
+ cdrom_e.pdf : Content list of CD-ROM
: README file
(J apanese version)
J pn+Document+Discontinued_model+M3A-2142G04+
+ Readme_j.txt
+ 2142g04sk_j.pdf
+ cdrom_j.pdf
: README file
: M3A-2142G04 product standards
: Content list of CD-ROM
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 29 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.5 Sample Program
The application notes, the object and source files of sample programs for the M32R/ECU’s
peripheral functions to be written into the M32R/ECU’s internal flash memory that can be used on
the Evaluation Board for Starter kit, are included in the CD-ROM
(English version)
Eng+SampleProgram+
+ 32170_32171
+ 32172_32173
+ 32176
+ 32180_32182
+ 32185_32186
: 32170/32171 Group application notes and sample programs
: 32172/32173 Group application notes and sample programs
: 32176 Group application notes and sample programs
: 32180/32182 Group application notes and sample programs
: 32185/32186 Group application notes and sample programs
+ 32192_32195_32196 : 32192/32195/32196 Group application notes and
sample programs
(J apanese version)
J pn+SampleProgram+
+ Readme.html
: README file
+ 32170_32171
+ 32172_32173
+ 32176
+ 32180_32182
+ 32185_32186
: 32170/32171 Group application notes and sample programs
: 32172/32173 Group application notes and sample programs
: 32176 Group application notes and sample programs
: 32180/32182 Group application notes and sample programs
: 32185/32186 Group application notes and sample programs
+ 32192_32195_32196 : 32192/32195/32196 Group application notes and
sample programs
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 30 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Appendix 2 Part List
A part list is provided in following pages for your reference.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 31 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 32 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Appendix 3 M3A-2154G02A Product Standards
This manual describes how to operate the M3A-2154G02A (32185/32186/32192/32195/32196 Group
Evaluation Board)
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 33 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1. Overview
1.1 Outline of the Product
Table 1.1 Mounted Microcomputer Type
Mounted microcomputer type name
Evaluation board type name (socket mounted type)
M3A-2154G02A
M32192F8VFP
M32186F8VFP
Default
(Note1)
Note1: Using M32186F8VFP, setting of oscillator circuit should be changed. For details, refer to chapter 2.5 Oscillator
circuit.
Table 1.2 Specification of Product
Operation mode
Board extension
CAN I/F
Single-chip mode, Processor mode and External extension mode
Can be extended using the board’s extension connector
Comes standard with a 2-channel CAN connector, CAN cable included
Comes standard with a connector
RS-232C I/F
Serial port
One of four channels can be selected using a rotary switch
Inputs on two channels can be controlled using variable resistor (VR)
controls
Analog port
Display I/O
Input I/O
Comes with a single-port LED
Comes with a single-port toggle switch
VR controls
Power supply connector
LED indicator
(port output)
LED indicator
(power-on)
CAN connector
JTAG connector
External
extension
connector
NBD connector
Reset key
RS-232C connector
Rotary switch
(selects a serial I/O channel)
Toggle switch
(port input)
Figure 1.1 Photograph of the M3A-2154G02A
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 34 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.2 External View
An external view of the M3A-2154G02A is shown below.
Figure 1.2 External View of the M3A-2154G02A
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 35 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.3 Block Diagram
A block diagram of the M3A-2154G02A is shown below.
Extension board
Host PC
(Windows)
(JTAG, MCU control and
other pins excluded)
144
Extension connector
144
(JTAG,MCU control
and other pins excluded)
2
RS-232C
cable
Port
RS-232C
driver
RS-232C
connector
FP
select
FP
MOD0/
MOD1
MOD
select
8
Serial I/O
Channel select
SIO
8
Port13
JTAG
8
5
8
JTAG
connector
Port11
CAN
4
CAN
CAN
connector
driver
NBD I/F
connector
NBD I/F
RESET
VCCE
power supply
connector
VCCE
Reset
circuit
VVCC-BUS
/VDDE
/VCCER
/AVCC
/VREF0
10MHz
20MHz
2
Oscillator
circuit
XIN
AD
32185/32186/32192/
32195/32196 group MCUs
Figure 1.3 Block Diagram of the M3A-2154G02A
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 36 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
1.4 Specifications of the Evaluation Board
1.4.1 Electrical Characteristics
Table 1.3 Electrical Characteristics
Symbol
VCCE,VCC-BUS
Tstr
Parameter
Power supply voltage
Rated Value
4.75 V to 5.25 V
Storage ambient temperature
0°C to 60°C
5°C to 35°C
Topr
Operating ambient temperature
Note: Operating conditions require that no dewdrops and corrosive gas be present.
1.4.2 Functional Characteristics
Table 1.4 Functional Characteristics
Item
M3A-2154G02A
Group MCU name
Clock input
CPU clock
Flash memory
SRAM
32185
32186
32192
32195
20MHz
160MHz
512KB
32KB
32196
CPU
10MHz
80MHz
512KB
32KB
1MB
1MB
1MB
Memory
64KB
176KB
64KB
Comes standard with a 9-pin Dsub connector (CN5) for serial
communication with the host PC (Windows)
RS-232C interface
JTAG interface
NBD interface
Comes standard with a 10-pin JTAG connector for Renesas SDI (XCN1)
Comes standard with a 14-pin NBD connector (CN4)
Comes standard with a 2-channel connector for CAN communication (CN3),
a CAN-to-Dsub connector (9-pin) conversion cord included
CAN interface
VCCE
Power supply, Connector (CN2)
Power
supply
VCC-BUS
Power supply for bus control pin, Connector (CN1)
Illuminates in red when powered on (LED1)
LED indicators (L0–L7), CPU ports (P110–P117)
Toggle switches (S0–S7), CPU ports (P130–P137)
LED
General-purpose output
General-purpose input
Reset switch (SW1), reset input (red pushbutton)
*Please be careful to configure a reset circuit according to your
system.
Reset
Serial I/O
Rotary switch (SW2), which selects one of four serial I/O channels
VR controls (VOL0, VOL1)
Analog input
Extension
Connects these VR controls with AD0IN0 and AD0IN1 to use them to
control inputs on ports
Extension connectors (CON1, CON2)
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 37 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2. Functional Specifications
2.1 Configuration of the Power Supply
The power to the M32R/ECU can be supplied from two sources, VCC-BUS and VCCE,
independently of each other. With default settings, the power to the M32R/ECU is fed through the
VCCE power supply connector to all of its internal circuits.
CN1
S2B-XH-A
TX1
J3
1
2
VCC
3
1
2
VCC-BUS power supply
GND
TX2
CN2
S2B-XH-A
1
2
VCC
GND
VCCE power supply
VCCER power supply
1
2
J4
U3
LT1086CM-3.3
5V 3.3V
1
2
J5
J7
AVCC0 power supply
VREF0 power supply
VDDE power supply
1
2
J6
* CONx : Connector
* Jx : Jumper
* TXx : Test pin
* Ux : IC
1
2
Note: CN1, TX1 and U3 are not mounted but they only have patterns available.
Figure 2.1 Power Supply Circuit
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 38 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Table 2.1 Configuration of the Power Supply
Jumper
Condition
Power
Supply
Connector
Description
Name
J3
Shorted
between 1–2
Shorted
between 2–3
Default
—
Power supply from VCCE (CN2)
CN1
VCC-BUS
Power supply from VCC-BUS (CN1)
VCCE power supply
CN2
—
VCCE
—
J4
—
Shorted
between 1–2
Shorted
Default
(Note1)
VCCER
Power supply from VCCE
—
—
—
AVCC0
VREF0
VDDE
J5
J6
J7
Default
Default
Default
Power supply from VCCE
Power supply from AVCC0
Power supply from VCCE
between 1–2
Shorted
between 1–2
Shorted
between 1–2
Note1: Case of opened between 1-2, power supply from VCCE is stopped.
Case that 3.3 V power supply is inputted to VCCER by using 3.3 V generated circuit on board, the following items
should be prepared by the user.
- U3: regulator
- D1,D2: diode
- C4,C5: capacitor
Note: The J3, J4, J5, J6 and J7 jumpers are shorted by pattern wiring on the reverse side of printed Circuit board.
Case of setting the condition except for default, setting the jumper is required after cutting the pattern for default
condition by referring to the chapter 3.8 Setting jumper by cutting pattern.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 39 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.2 FP Select Circuit
The FP select circuit is used for reprogramming the internal flash memory of the M32R/ECU.
This circuit is configured in such a way that FP is switched from the EXTFP signal of extension
connector (CON2) by using a jumper (J 10).
VCCE
CON2
U1
FX1-144S-1.27DS
M32R/ECU
TX14
J10
EXTFP
1
3
2
FP
* CONx : Connector
* Jx : Jumper
* TXx : Test pin
* Ux : IC
Note: TX14 is not mounted but it only has one pattern available.
Figure 2.2 FP Select Circuit
Table 2.2 FP Select Circuit (Jumper)
Name
J10
Condition
Shorted
between 1–2
Shorted
between 2–3
Description
Default
Enables reprogramming the mounted M32R/ECU’s internal flash
Disables reprogramming the mounted M32R/ECU’s internal flash
Unusable
Open
Note: The J10 jumper is shorted by pattern wiring on the reverse side of printed circuit board.
Case of setting the condition except for default, setting the jumper is required after cutting the pattern
for default condition by referring to the chapter 3.8 Setting jumper by cutting pattern.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 40 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.3 MOD Select Circuit
This circuit is used to set operation modes of the M32R/ECU. The MOD0 power supply is
configured in such a way that MOD0 is switched from the EXTMOD0 signal of extension connector
(CON2) by using a jumper (J 8).
The MOD1 power supply defaults to 0 V. The MOD2 power supply is fixed to 0 V.
VCCE
CON2
FX1-144S-1.27DS
U1
M32R/ECU
TX6
J8
3
1
2
MOD0
EXTMOD0
VCCE
J2
3
1
2
MOD1
MOD2
* CONx : Connector
* Jx : Jumper
* TXx : Test pin
* Ux : IC
Note: TX6 is not mounted but it only has one pattern available.
Figure 2.3 MOD Select Circuit
Table 2.3 Operation Mode Settings
MOD0 MOD1 MOD2
Description
• When flash reprogramming is disabled: Single-chip mode
• When flash reprogramming is enabled: Flash rewrite + single-chip mode
0
0
0
• When flash reprogramming is disabled: Processor mode
• When flash reprogramming is enabled: Flash rewrite from boot ROM +
single-chip mode
1
0
0
0
1
1
1
0
0
External extension mode
Settings inhibited
Table 2.4 MOD Select Circuit (Jumper)
Name
Condition
Description
Shorted
between 1–2
MOD0 is controled by EXTMOD0 or is set to 0 unless it is
controled by EXTMOD0
Default
Default
J8
Shorted
between 2–3
Shorted
between 1–2
Shorted
between 2–3
Sets MOD0 to 1
Sets MOD1 to 0
Sets MOD1 to 1
J2
Note: The J2 and J8 jumpers are shorted by pattern wiring on the reverse side of printed circuit board.
Case of setting the condition except for default, setting the jumper is required after cutting the pattern
for default condition by referring to the chapter 3.8 Setting jumper by cutting
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 41 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.4 Serial I/O Interface
The evaluation board is interfaced to the host PC (Windows) through its RS-232C by using SIO of
the M32R/ECU. Of the RS-232C control signals, only TXD and RXD are used for connection to the
host PC (Windows). The unused CTS and RTS are directly-coupled to configure a loop-back. The
unused DSR and DTR also are configured in a similar manner.
The serial I/O interface is configured in such a way that only one serial I/O channel can be used at a
time.
Any of the four channels 0–3 can be selected using a rotary switch.
U1
U8
M32R/ECU
QS21X384Q1G
TXD0
TXD1
TXD2
TXD3
P82/TXD0/TO26
P85/TXD1/TO23
P174/TXD2/TO28
CN5
XM2C-0912
U9
MAX3232CSE+
TXD
TXD
P74/RTDTXD/
TXD3/NBDD0
J15
J18
J19
J20
RXD0
RXD
3
RXD
P83/RXD0/
TO25
2
2
DTR
DSR
1
3
CTS
RTS
RXD1
RXD2
RXD3
P86/RXD1/TO22
P175/RXD2/TO27
1
3
2
2
1
U7
TC74VHC138FT
3
P75/RTDRXD/
RXD3/NBDD1
Y0
Y3
Y1
Y2
1
A
B
C
CON2
FX1-144S-1.27DS
P83
P86
P175
P82
SW2
DR-KR10H
P85
P174
CON1
FX1-144S-1.27DS
CN4
XG4C-1434
* CNx,CONx : Connector
* Jx : Jumper
* SWx : Switch
* Ux : IC
P74
P75
NBDD0
NBDD1
Figure 2.4 Serial I/O Interface
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 42 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Table 2.5 Channel Selection by a Rotary Switch
Rotary switch position
SIO Selected channel
0
1
2
3
4
5
6
7
8
9
SIO0
SIO1
SIO2
SIO3
SIO0
SIO1
SIO2
SIO3
SIO0
SIO1
Table 2.6 Serial I/O Interface (Jumper)
Name
Condition
Description
Shorted
between 1–2
Shorted
between 2–3
Shorted
Default
Default
Default
Default
Connects P83/RXD0/TO25 to the extension connector (CON2)
J15
Uses the RXD0 function in RS-232C
Connects P86/RXD1/TO22 to the extension connector (CON2)
Uses the RXD1 function in RS-232C
between 1–2
J18
J19
J20
Shorted
between 2–3
Shorted
Connects P175/RXD2/TO27 to the extension connector (CON2)
Uses the RXD2 function in RS-232C
between 1–2
Shorted
between 2–3
Shorted
Connects P75/RTDRXD/RXD3/NBDD1 to the extension connector
(CON1)
between 1–2
Shorted
Uses the RXD3 function in RS-232C
between 2–3
Note: The jumpers J15, J18, J19 and J20 are shorted by jumper parts.
Table 2.7 RS-232C Connector Pin Assignments
Connector
Pin No
Signal Name
Description
Name
1
2
3
4
5
6
7
8
9
DCD
RXD
TXD
DTR
SG
Unused
Received data
Transmitted data
Connects to the DSR pin
Ground
CN5
DSR
RTS
CTS
RI
Connects to the DTR pin
Connects to the CTS pin
Connects to the RTS pin
Unused
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 43 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.5 Oscillator Circuit
The oscillator circuit can be selected from three options by using the jumper J 1: a surface
mount-type 20 MHz crystal oscillator module, a surface mount-type 10 MHz crystal oscillator
module or a crystal resonator. By default, the surface mount-type 20 MHz crystal oscillator module
is selected.
X1
Surface mount-type
oscillator module
20MHz
OUT
U1
M32R/ECU
1
3
J1
4
X2
Surface mount-type
oscillator module
10MHz
2
OUT
XIN
R2
XOUT
R4
C1
Y1
* Cx : Capacitor
* Jx : Jumper
* Rx : Resister
* Ux : IC
C2
* Xx : Oscillator modules
* Yx : Resonator
Figure 2.5 Oscillator Circuit
Note: The shaded sections in the above diagram have only patterns available. When using the resonator Y1, please be
sure to add capacitors (C1, C2) and a resistor (R2, R4).
Table 2.8 Oscillator Circuit Connections (Jumper)
Name
Condition
Shorted
between 1–4
Description
Default
Outputs a clock from X1 (surface mount-type oscillator module)
Shorted
between 2–4
Shorted
J1
(Note1)
Outputs a clock from X2 (surface mount-type oscillator module)
Outputs a clock from Y1 (resonator)
between 3–4
Note1: Using M32186F8VFP, the J1 jumper should be shorted between 2-4.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 44 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.6 General-purpose Output Port LED Indicators
The LED indicators (L0–L7) are used to indicate the status of the M32R/ECU ports P110–P117.
VCCE
U1
U6
M32R/ECU
TC74HC540AF
L0
P110
L1
L2
L3
L4
L5
L6
L7
P111
P112
P113
P114
P115
P116
P117
CON1
FX1-144S-1.27DS
P110
P111
P112
P113
P114
P115
P116
P117
* CONx : Connector
* Lx : LED
* Ux : IC
Figure 2.6 LED Indicator Block for the General-purpose Output Ports
Table 2.9 LED Indicators of General-purpose Output Ports
Corresponding
LED Name
ON Condition
Color
M32R/ECU Port
L0
L1
L2
L3
L4
L5
L6
L7
P110
High
High
High
High
High
High
High
High
Red
Red
Red
Red
Red
Red
Red
Red
P111
P112
P113
P114
P115
P116
P117
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 45 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.7 General-purpose Input Port Control Circuit
The general-purpose input port control circuit is used to control the status of the M32R/ECU ports
P130–P137 by using toggle switches (S0–S7). For the settings of jumpers J 16 and J 17, see the
Section 2.9 CAN Interface.
VCCE
U1
M32R/ECU
S0
S1
S2
S3
S4
S5
S6
S7
2
1
3
P130
P131
P132
P133
P134
P135
P136
P137
1
3
2
2
1
3
1
3
2
2
1
3
1
3
2
2
1
3
1
3
2
U5
PCA82C250T
J17
3
1
RXD
TXD
2
CON1
FX1-144S-1.27DS
J16
P136
P137
3
1
* CONx : Connector
* Jx : Jumper
* Sx : Switch
* Ux : IC
2
Figure 2.7 General-purpose Input Port Control Circuit
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 46 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Table 2.10 Relationship Between
Toggle Switches and Ports
Table 2.11 Toggle Switch Positions
Lever Direction Port Input Level
Corresponding
Toggle Switch Name
M32R/ECU Port
S0
S1
S2
S3
S4
S5
S6
S7
P130
Up
High
Open
Low
P131
P132
P133
P134
P135
P136
P137
Middle
Down
Down
Lever direction
Up
Middle
Port input level
H
Open
L
Figure 2.8 Toggle Switch Positions
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 47 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.8 Analog Port Input Control Circuit
The analog port input control circuit is used to control the status of the M32R/ECU analog ports
AD0IN0 and AD0IN1 by using VR controls VOL0 and VOL1.
U1
M32R/ECU
VCCE
VCCE
2
2
1
1
J12
J13
VOL0
AD0IN0
VOL1
AD0IN1
CON1
FX1-144-1.27DS
AD0IN0
* CONx : Connector
* Jx : Jumper
AD0IN1
* Ux : IC
* VOLx : VR control
Figure 2.9 Analog Port Input Control Circuit
Table 2.12 Analog Port Input Control (Jumper)
Name
Condition
Shorted
between 1–2
Open
between 1–2
Shorted
between 1–2
Open
between 1–2
Description
Default
Default
Uses VR control (VOL0)
J12
Does not use VR control (VOL0)
Uses VR control (VOL1)
J13
Does not use VR control (VOL1)
Note: The J12 and J13 jumpers are shorted by pattern wiring on the reverse side of printed circuit board.
Case of setting the condition except for default, setting the jumper is required after cutting the pattern
for default condition by referring to the chapter 3.8 Setting jumper by cutting pattern.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 48 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.9 CAN Interface
The evaluation board is interfaced to a CAN-mounted system by using the internal CAN functions
of the M32R/ECU.
TX7
U4
CN3
TX8
TX9
PCA82C250T
TM2REA-1208
U1
M32R/ECU
CANH1
CANH
TXD
P220/CTX0/HACK
J9
TX10
TX11
R14
J14
3
1
RXD
P221/CRX0/HREQ
2
CANL
CANL1
CANH2
U5
TX12
TX13
PCA82C250T
CANH
TXD
J16
J17
3
J11
2
P137/TIN23/CTX1
P136/TIN22/CRX1
1
3
TX15
R17
RXD
2
CANL2
CANL
1
VCCE
CON1
FX1-144S-1.27DS
S7
2
1
P220
3
1
S6
2
P221
P137
* CNx,CONx : Connector
* Jx : Jumper
P136
* Rx : Resister
* Sx : Switch
3
* TXx : Test pin
* Ux : IC
Note: TX7, TX8, TX9, TX10, TX11, TX12, TX13 and TX15 are not mounted but they only have patterns available.
Figure 2.10 Interface with a CAN-mounted System
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 49 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Table 2.13 CAN Connector Pin Assignments
Connector
Pin No
Signal Name
Description
Name
1
2
3
4
5
6
7
8
CANH1
CANL1
CANH2
CANL2
GND
High-level CAN0 input/output port
Low-level CAN0 input/output port
High-level CAN1 input/output port
Low-level CAN1 input/output port
Ground
CN3
—
Unused
GND
Ground
—
Unused
(1) How to connect the CAN connector
The jumpers J 14, J 16 and J 17 allow selecting the destinations to which the CAN communication
pins (CTX, CRX) are connected.
Table 2.14 Jumper Usage Conditions (J14, J16 and J17)
Name
Condition
Shorted
between 1–2
Shorted
between 2–3
Shorted
Description
Default
Default
Default
Connects P221/CRX0/HREQ to the extension connector (CON1)
J14
Uses the CRX0 function in CAN connector CN3
Connects P137/TIN23/CTX1 to the extension connector (CON1)
Uses the CTX1 function in CAN connector CN3
between 1–2
J16
J17
Shorted
between 2–3
Shorted
between 1–2
Shorted
between 2–3
Connects P136/TIN22/CRX1 to the extension connector (CON1)
Uses the CRX1 function in CAN connector CN3
Note: The jumpers J14, J16 and J17 are shorted by jumper parts.
(2) How to select the terminating resistor connection
The jumpers J 9 and J 11 allow the terminating resistors to be used in the CAN transmission path.
Table 2.15 Selecting the Terminating Resistor Connection (J9, J11)
Name
Condition
Shorted
between 1–2
Open
between 1–2
Shorted
between 1–2
Open
between 1–2
Description
Default
Default
Uses the CAN0 terminating resistor mounted on-board
J9
Does not use the CAN0 terminating resistor mounted on-board
Uses the CAN1 terminating resistor mounted on-board
J11
Does not use the CAN1 terminating resistor mounted on-board
Note: The jumpers J9 and J11 are shorted by jumper parts.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 50 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
2.10 JTAG/NBD Interface
The J TAG connector for Renesas SDI, XCN1 consists of the 2.54-mm contact pitch XG4C-1034
made by Omron Corporation. The NBD connector, CN4 consists of the 2.54-mm contact pitch
XG4C-1434 made by Omron Corporation.
VCCE
CN4
XG4C-1434
U1
M32R/ECU
1
2
3
4
5
6
7
JTCK
JTDI
JTDO
RESET
JTMS
JTRST
P77/RTDCLK/
CRX1/NBDD3
P76/RTDACK/
8
9
CTX1/NBDD2
10
P75/RTDRXD/
RXD3/NBDD1
P74/RTDTXD/
TXD3/NBDD0
11
12
13
14
U2
M51957BFP
VCCE
6
J20
1
3
XCN1
XG4C-1034
U8
QS21X384Q1G
2
1
2
B16
A15
3
CON1
FX1-144S-1.27DS
4
5
6
RESET
P75
7
8
P74
9
P76
10
P77
* CNx,CONx,XCNx : Connector
* Jx : Jumper
* Ux : IC
Figure 2.11 JTAG/NBD Interface
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 51 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
Table 2.16 JTAG Interface Connector Pin Assignments
Connector
Pin No
Signal Name
Description
Name
1
2
JTCK
GND
Test clock
Ground
3
JTDI
Test data input
Test data output
Test mode select
Test reset
4
JTDO
JTMS
JTRST
JDBI
5
XCN1
6
7
Break request
Power supply
User system power supply monitor
Reset
8
VCCE
JVCC
RESET
9
10
Table 2.17 NBD Interface Connector Pin Assignments
Connector
Pin No.
Signal Name
Description
Name
1
2
NBDCLK
GND
Synchronizing clock input
Ground
3
NBDSYNC#
NBDEVNT#
RESET
GND
Top of data input
Event output
4
5
Reset
6
Ground
7
JVCC
Power supply
CN4
8
NBDD3
NBDD2
GND
Command/Address/Data
Command/Address/Data
Ground
9
10
11
12
13
14
NBDD1
NBDD0
NC
Command/Address/Data
Command/Address/Data
Unused
NC
Unused
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 52 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3. Reference Data
3.1 Jumper and Test Pin Lists
3.1.1 Jumpers
Table 3.1 Jumper List
Jumper No.
Default
Description
J1
J2
J3
J4
J5
J6
J7
Shorted between 1–4 Outputs a clock from X1 (surface mount-type oscillator module)
Shorted between 1–2 Sets MOD1 to 0
Shorted between 1–2 Power supply from VCCE
Shorted between 1–2 Power supply from VCCE
Shorted between 1–2 Power supply from VCCE
Shorted between 1–2 Power supply from AVCC0
Shorted between 1–2 Power supply from VCCE
MOD0 is controled by EXTMOD0 or is set to 0 unless it is controled
J8
Shorted between 1–2
by EXTMOD0
J9
Shorted between 1–2 Uses the CAN0 terminating resistor mounted on-board
Shorted between 1–2 Enables reprogramming the mounted M32R/ECU’s internal flash
Shorted between 1–2 Uses the CAN1 terminating resistor mounted on-board
Shorted between 1–2 Uses the VR control (VOL0)
J10
J11
J12
J13
J14
J15
J16
J17
J18
J19
Shorted between 1–2 Uses the VR control (VOL1)
Shorted between 1–2 Connects P221/CRX0/HREQ to the extension connector (CON1)
Shorted between 1–2 Connects P83/RXD0/TO25 to the extension connector (CON2)
Shorted between 1–2 Connects P137/TIN23/CTX1 to the extension connector (CON1)
Shorted between 1–2 Connects P136/TIN22/CRX1 to the extension connector (CON2)
Shorted between 1–2 Connects P86/RXD1/TO22 to the extension connector (CON2)
Shorted between 1–2 Connects P175/RXD2/TO27 to the extension connector (CON2)
Connects P75/RTDRXD/RXD3/NBDD1 to the extension connector
J20
Shorted between 1–2
(CON1)
3.1.2 Test Pins
Table 3.2 List of Test Pins
Test Pin No.
Signal Name
VCC-BUS
VCCE
Test Pin No.
TX10
Signal Name
CANL1
CANH2
CTX1
TX1
TX 2
TX 3
TX 4
TX 5
TX 6
TX 7
TX 8
TX 9
TX 11
GND
TX 12
TX 13
TX 14
TX 15
TX 16
TX17
GND
CRX1
RESET
MOD0
FP
CANL2
TXD1
CANH1
CTX0
P87
CRX0
TX 18
VREF0
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 53 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.2 Extension Connectors CON1 and CON2
3.2.1 Pin Assignments of the Extension Connector CON1
Bard edge
1st pin
3rd pin
120 108 96
114 102 90
84
72
60
48
36
24
12
CON1
78
66
54
42
30
18
6
Figure 3.1 CON1 Connector Pin Assignments (View from Side of Mounted Items)
Table 3.3 CON1 Connector Pin Assignments
Signal
Name
Signal
Name
Signal
Name
Signal
Name
Pin No.
Pin No.
Pin No.
Pin No.
1
AVCC
GND
VCCE
P150
NC
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
NC
NC
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
VCCE
GND
91
92
NC
2
P124
P125
P126
P127
3
GND
NC
AVCC0
VREF0
AD0IN0
AD0IN1
AD0IN2
AD0IN3
AD0IN4
AD0IN5
AD0IN6
AD0IN7
GND
93
4
94
5
RESET
NC
95
6
NC
96
NC
NC
7
P153
NC
NC
97
8
NC
98
NC
9
NC
NC
99
NC
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
NC
NC
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
P74
P75
P76
P77
NC
AD0IN8
AD0IN9
AD0IN10
AD0IN11
AD0IN12
AD0IN13
AD0IN14
AD0IN15
P61
NC
NC
NC
P130
P131
P132
P133
P134
P135
P136
P137
P220
P221
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
P110
P111
P112
P113
P114
P115
P116
P117
P97
P100
P101
P102
P103
P104
P105
P106
P107
P62
P63
SBI
GND
NC
GND
VCCE
GND
NC
GND
VCCE
GND
Note: NC denotes “Not Connected.”
Pin Nos. 121 to 144 are not connected.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 54 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.2.2 Pin Assignments of the Extension Connector CON2
1st pin
3rd pin
Board edge
CON2
234 222 210 198 186 174 162 150 138 126
240 228 216 204 192 180 168 156 144 132
Figure 3.2 CON2 Connector Pin Assignments (View from Side of Mounted Items)
Table 3.4 CON2 Connector Pin Assignments
Signal
Name
Signal
Name
Signal
Name
Signal
Name
Pin No.
Pin No.
Pin No.
Pin No.
1 (121)
2 (122)
P96
P95
31 (151)
32 (152)
33 (153)
34 (154)
35 (155)
36 (156)
37 (157)
38 (158)
39 (159)
40 (160)
41 (161)
42 (162)
43 (163)
44 (164)
45 (165)
46 (166)
47 (167)
48 (168)
49 (169)
50 (170)
51 (171)
52 (172)
53 (173)
54 (174)
55 (175)
56 (176)
57 (177)
58 (178)
59 (179)
60 (180)
NC
NC
61 (181)
62 (182)
63 (183)
64 (184)
65 (185)
66 (186)
67 (187)
68 (188)
69 (189)
70 (190)
71 (191)
72 (192)
73 (193)
74 (194)
75 (195)
76 (196)
77 (197)
78 (198)
79 (199)
80 (200)
81 (201)
82 (202)
83 (203)
84 (204)
85 (205)
86 (206)
87 (207)
88 (208)
89 (209)
90 (210)
P174
P175
NC
91 (211)
92 (212)
93 (213)
94 (214)
95 (215)
96 (216)
97 (217)
98 (218)
99 (219)
100 (220)
101 (221)
102 (222)
103 (223)
104 (224)
105 (225)
106 (226)
107 (227)
108 (228)
109 (229)
110 (230)
111 (231)
112 (232)
113 (233)
114 (234)
115 (235)
116 (236)
117 (237)
118 (238)
119 (239)
120 (240)
P1
P0
3 (123)
P94
VCC-BUS
VCCE
GND
NC
GND
P73
P72
4 (124)
P93
NC
5 (125)
VCCE
GND
VCC-BUS
P27
NC
6 (126)
NC
P71
P70
P43
P42
P41
VCC-BUS
GND
NC
7 (127)
NC
FP
8 (128)
NC
MOD0
NC
9 (129)
P26
NC
10 (130)
11 (131)
12 (132)
13 (133)
14 (134)
15 (135)
16 (136)
17 (137)
18 (138)
19 (139)
20 (140)
21 (141)
22 (142)
23 (143)
24 (144)
25 (145)
26 (146)
27 (147)
28 (148)
29 (149)
30 (150)
P25
NC
NC
P24
NC
GND
NC
P23
NC
P22
NC
NC
P21
NC
GND
VCCE
VCC-BUS
P17
P16
P15
P14
P13
P12
P11
P10
P7
NC
P20
NC
NC
GND
P37
NC
NC
NC
NC
P36
NC
NC
P35
NC
NC
P34
NC
NC
P33
NC
GND
NC
P32
NC
P31
NC
NC
P30
NC
NC
P47
P87
P86
P85
P84
P83
P82
NC
P46
P6
NC
P225
P224
P45
P5
NC
P4
NC
P3
NC
P44
P2
NC
Note: NC denotes “Not Connected.”
Pin Nos. 121 to 144 are not connected.
Numbers in parentheses ( ) in the table correspond to the Pin No. on the board.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 55 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.3 CAN Cable
(1) External View
CC1:Modular plug
CC2:Dsub connector
100mm
1
6
5
9
6
1
Figure 3.3 External View
(2) CC1 and CC2 Connections
Table 3.5 Connection Table
CN1
CN2
Pin No.
Pin Name
—
Pin Name
NC
Pin No.
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
CANL (blue)
—
CANL
GND
NC
CANH (white)
GND (black)
—
NC
NC
CANH
NC
NC
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 56 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.4 Connection Diagram
A connection diagram is provided in following pages for your reference.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 57 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
P E ( N O M ) 1
1 K
E X C V D D
E X C V C C
E X C V C C
7 3
1 3 7
6 1
M 3 2 1 9 2 F 8 V F P / M 3 2 1 8 6
V D D E
1 0 8
V C C E
V C C E
1 3 2
9 5
V S S
1 3 8
V S S
9 6
V S S
7 2
V C C E R
V S S
6 2
6 5
V S S
2 1
V C C B U S
V C C B U S
V S S
3
2 0
6
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 58 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 K
0
1 0 K
2 K
9
8
7
6
4
3
2
1
1 0
5
2 2 K
G N D
1
1 K
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 59 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 K
1 0 K
1 2 0
1 2 0
1
2
1
2
8
7
6
5
1
2
3
4
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 60 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
9
8
7
6
4
3
2
1
9
8
7
6
4
3
2
1
1 0
5
1 0
5
9
8
7
6
4
3
2
1
1 0
5
9
8
7
6
4
3
2
1
1 0
5
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 61 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
9
8
7
6
4
3
2
1
1 0
5
1 0 K
8
7
6
5
1
2
3
4
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 62 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 63 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.5 Part List
A part list is provided in following pages for your reference.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 64 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 65 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 66 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 67 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 68 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.6 Pattern Diagram
A pattern diagram for the board is provided in following pages for your reference.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 69 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 70 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 71 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 72 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 73 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 74 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 75 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.7 Diagram of External Dimension
A diagram of external dimension for the board is provided in following pages for your reference.
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 76 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
C H A N G E
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 77 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.8 Setting Jumper by Cutting Pattern
Some jumpers are shorted at default condition by pattern wiring on the reverse side of printed
circuit board. Case of setting the condition except for default, the following setting is required.
Note: Case that the printed circuit board is cut pattern by user, the product is except from repairable list.
3.8.1 Cutting Pattern
The pattern wiring for default condition of jumper is on the reverse side of printed circuit board.
After checking the position of the jumper, cut the pattern wiring between through-holes
Zoom (J7)
Example of cutting
pattern
Note: Cut pattern wiring
from edge of
through-hole.
About 0.5mm
J5 J6
J8 J10
J12
J13
J3
J4
J2
Figure 3.4 Example of Cutting Pattern
Table 3.6 List of Jumper
Jumper No.
J2
Description
Jumper No.
J7
Description
Sets MOD1 to 0
Power supply from VCCE
Controls MOD0 by EXTMOD0, unless control
MOD0 by EXTMOD0 sets MOD0 to 0
Enables reprogramming the mounted M32R/ECU’s
internal flash
J3
J4
Power supply from VCCE
Power supply from VCCE
J8
J10
J5
J6
Power supply from VCCE
Power supply from AVCC0
J12
J13
Uses the VR control (VOL0)
Uses the VR control (VOL1)
3.8.2 Jumper Shorting
The jumper is shorted according to the condition.
The example of using jumper pin is shown below.
Figure 3.5 Example of Using Jumper Pin
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 78 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual M3A-2154G52B
3.9 Description of Board Silk
The color of board silk indicates solder specification when the items on board are mounted.
Table 3.7 Difference in the Color of Board Silk
Color of board silk
White
Solder specification when the items on board are mounted
Using nonlead-free soldering
Yellow
Using lead-free soldering
REJ10B0223-0140/Rev.1.40
Jan. 2007
Page 79 of 79
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group Starter Kit
User’s Manual M3A-2154G52B
REVISION HISTORY
Description
Summary
Rev.
Date
Page
—
1.00
1.30
Oct. 10, 2004
Oct. 16, 2006
First edition
—
- Added the board M3A-2154G02A product (Appendix 3)
- Added the 32185 Group and the 32195 Group to the starter kit applicable
microcomputer
- Updated a setup method along with the tool update (Chapter 6)
- Updated contents of CD-ROM (Appendix 1)
- Updated a diagram of the external dimension. (Appendix 3.3.7)
Updated contents of the evaluation board of M3A-2152G52A User’s Manual
- Updated an external view and a block diagram (1. Overview)
- Added description of board silk (3.9 Description of Board Silk)
1.40
Jan. 19, 2007
—
REVISION-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
Colophon 6.0
Download from Www.Somanuals.com. All Manuals Search And Download.
32185/32186/32192/32195/32196 Group
Starter Kit User’s Manual
M3A-2154G52B
Download from Www.Somanuals.com. All Manuals Search And Download.
|