| Thermometer Watch   OWNER’S MANUAL —   Please read before using this equipment.   63-5048   Thank you for your purchasing the   7. Repeat steps 5 and 6 to preset a date   for the alarm if desired.   RadioShack Thermometer Watch. It   functions as a watch with dual timekeeping,   alarm, timer, stopwatch, and thermometer.   8. Press ADJUST when you are finished   setting the alarm. The alarm sounds   about 20 seconds at the set time. Ô   OPERATION   SETTING THE DUAL TIME   Remove the protective film from the display   before use. To view the display in the dark,   press SPLIT/RESET. The backlight turns on   for about three seconds.   This features allows you to view time for a   city in another time zone. The time shown on   the upper half of the display is the current   local time; the time on the lower half of the   display is the dual time. If you do not press a   button within two minutes, the watch returns   to dual time mode.   SETTING THE TIME AND   TEMPERATURE   1. Repeatedly press   MODE until the time,   day, and date appear.   Ô 1. Press MODE until DT   appears.   2. Press ADJUST. The   hour digits flash.   2. Press ADJUST. The   second digits flash. Ô   3. Repeatedly press or hold down ST./STP.   to set the hour. Ô   3. Press ST./STP. to reset the seconds to   Ô NOTE Ô   Setting the Time and Temperature   zero.   4. Press MODE to confirm.   • Press ST./STP. to toggle between day and   4. Repeatedly press MODE to set the hour,   minutes, year, month, date, and   temperature (Celsius versus   temperature.   5. Repeat steps 3 and 4 to set the   minutes.   • When you enter setting mode, the weekday   or temperature display changes to year.   Fahrenheit), then repeatedly press and   hold down ST.STP. to set the digits as   desired. Ô   6. Press ADJUST when you are finished   • Repeatedly press SPLIT/RESET while in   time setting mode to select 12- or 24-hour   time format. PM appears for a PM hour in   12-hour time, 24H appears for 24-hour time.   setting the dual time.   USING THE TIMER AND   STOPWATCH   5. Press ADJUST when you are finished   • You can set the year from 1985 to 2029.   setting the time.   • For the most accurate temperature readings,   keep your watch away from warm surfaces.   • If you do not press a button within about two   minutes while in time/temperature setting   mode, the clock returns to time mode.   SETTING THE ALARM   In Timer Mode   You can set the alarm to sound daily at a   preset time, or on a specified date at a   preset time. If you do not press a button   within two minutes, the watch returns to   alarm mode.   The timer function enables you to set a time   to count down from (up to 23 hours, 59   minutes, 59 seconds). If you do not press a   button within two minutes, the watch returns   to timer mode.   Setting the Alarm   The alarm sounds for about 20 seconds at the   set time. Press any button to silence the alarm.   Setting the Dual Time   Repeatedly press SPLIT/RESET to select 12-   or 24-hour time format.   1. Repeatedly press   1. Repeatedly press   MODE until T’R   appears.   MODE until AL appears.   Using the Timer and Stopwatch   • In setting mode, press SPLIT/RESET to   toggle between normal counting and   repeated counting. Normal counting begins   from the time you set, and counts down to   zero. Repeated counting begins from the   time you set, counts down to zero, then   repeats the countdown sequence. AUTO   appears on the display when in repeated   counting mode.   2. Repeatedly press   SPLIT/RESET to turn on   or off the alarm or   2. Press ADJUST. The   hour digits flash.   hourly chime. appears for the alarm,   i ! appears for the hourly chime. When   the hourly chime is on, the watch beeps   twice every hour on the hour.   3. Repeatedly press ST./STP. to change   the selected digits to your desired   setting.   • If 00:00’00 appears on the display, the clock   will count down from 23:59’59 automatically   after you press ST.STP.   3. Press ADJUST. The alarm hour flashes.   4. Repeatedly press MODE to select the   minutes and seconds. Ô   4. Repeatedly press or hold down ST./STP.   to set the alarm hour.   5. Press ADJUST to exit.   5. Press MODE to confirm.   6. Press ST./STP. to start your timer. To   stop the timer, press ST./STP. again.   6. Repeatedly press or hold down ST./STP.   to set the alarm minutes.   IMPORTANT   ! ! © 2003 RadioShack Corporation.   All Rights Reserved.   RadioShack and RadioShack.com are trademarks used by   RadioShack Corporation.   If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon   for pertinent information.   Ô — Note   Download from Www.Somanuals.com. All Manuals Search And Download.   |