17-1110.fm Page 1 Wednesday, July 21, 1999 1:38 PM
Cat. No. 17-1110
Owner’s Manual
CT-501 Handheld Flip-Style
Cellular Telephone
Please read before using this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 3 Wednesday, July 21, 1999 1:38 PM
Security Features — to prevent unauthorized phone use,
you can lock the phone (so it cannot be used at all) or set it
so calls can be placed only to numbers stored in memory lo-
cations 01–10.
Special Messaging Service Features — the phone is pre-
programmed to work with special (subscription-only) messag-
ing services offered by many cellular carriers, including
calling line ID and voice mail notification.
Ample Talk and Standby Time — the supplied battery (fully
charged) provides about 2 hours of talk time or 30 hours of
standby time.
Battery and Cellular Signal Strength Meters — easy-to-
read graduated bar graphs let you quickly check the battery
power remaining or the current cellular signal strength.
Automatic Answer — lets you set the phone to answer auto-
matically after two rings (if you are using optional handsfree
equipment, for example).
Two Phone Number Capability — lets you use this one
phone with two different cellular services, with a different
phone number from each.
Handsfree Feature — the phone is preprogrammed to work
with most optional handsfree equipment.
We recommend you record your phone’s Electronic Serial
Number (ESN) here. The number is on the back of the hand-
set under the battery.
Serial Number _______________
3
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 4 Wednesday, July 21, 1999 1:38 PM
TABLE OF CONTENTS
A Look at Your Phone ............................................................... 6
Reading the Display/Indicators ............................................ 7
Using the Battery ..................................................................... 10
Installing the Battery .......................................................... 10
Charging the Battery ........................................................... 11
Checking Battery Power .................................................... 12
Replacing a Battery During a Call ...................................... 13
Important Battery Tips ........................................................ 14
Basic Operation ....................................................................... 15
Turning the Phone On/Off .................................................. 15
Signal Strength/Service Area ............................................. 15
Making a Call ..................................................................... 16
Answering a Call ................................................................ 18
Adjusting the Volume ......................................................... 19
Making Emergency Calls ................................................... 20
Redialing Numbers ............................................................ 21
Displaying Numbers ........................................................... 23
Menu Functions ....................................................................... 24
Overview ............................................................................ 24
Using the Menu Functions ................................................. 27
Using Memory .......................................................................... 31
Storing Speed Dial Numbers ............................................. 31
One-Touch Dialing ............................................................. 32
Speed Recall/Dialing ......................................................... 32
Memory Scrolling/Dialing ................................................... 33
Changing a Number in Memory ......................................... 34
Clearing a Memory ............................................................ 34
Using Scratchpad Memory ................................................ 35
Memory Dialing Tips .......................................................... 35
Security Features .................................................................... 36
Locking Your Phone ........................................................... 36
Using the Service Restriction ............................................. 39
4
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 5 Wednesday, July 21, 1999 1:38 PM
Special Features ...................................................................... 40
Using the Messaging Functions ......................................... 40
Using the Call Timers ......................................................... 42
Selecting the Active Phone Number .................................. 45
Setting the Cellular System Type ....................................... 46
Roaming ............................................................................ 49
Using Cellular System PIN Dialing .................................... 49
Using the Phone with Handsfree Equipment ..................... 51
Using Touch-Tone Services ............................................... 51
Troubleshooting ....................................................................... 53
Safety Information ................................................................... 54
Traffic Safety ...................................................................... 54
Operating Environment ...................................................... 54
Emergency Calls ................................................................ 55
FCC Regulations ............................................................... 56
Care and Maintenance ............................................................. 57
Specifications .......................................................................... 58
Patent Information ............................................................. 58
Display Message Glossary ..................................................... 60
5
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 6 Wednesday, July 21, 1999 1:38 PM
A LOOK AT YOUR PHONE
1
2
3
4
5
6
Retractable Antenna
1.
Extend during a call for optimum performance.
2. Earpiece
Alphanumeric Display (Ten-Character LED)
Displays the status indicators, phone number, memory
location number, and message.
3.
4.
Alphanumeric Keypad
Enters call information or programs functions.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 7 Wednesday, July 21, 1999 1:38 PM
5. Function Keys
RCL
— Recalls a function or numbers stored in memory.
CLR
— Removes characters or clears functions.
— Ends a call or exits the functions menu.
END
SND — Places or answers calls.
VOL
— Increases or decreases the ringer or earpiece
volume levels.
FCN
— Selects functions.
STO
— Stores to memory or turns on functions.
PWR
— Turns the phone on and off.
6. Flip Cover
READING THE DISPLAY/INDICATORS
Your phone’s display provides a full range of messages and
special indicators to assist you with the phone’s operation.
Since many of these messages contain more characters than
your phone can display at one time, the phone displays most
messages across more than one display. For example, the
g
phone displays EMr CYCALLthen (within about 1 second)
Onto indicate that the Emergency Call feature is turned on.
Note: When referring to a displayed message, this manual in-
g
cludes the entire message all together (such as EMr CY
CALLOn).
A few of your phone’s many indicators are briefly described
on the following pages. For a complete listing of display mes-
sages and indicators, see “Display Message Glossary” on
Page 60.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 8 Wednesday, July 21, 1999 1:38 PM
Signal Strength Indicator
Indicates the relative strength of the signal being received by
your phone. See “Signal Strength/Service Area” on Page 15.
Battery Charge Indicators
Represent the current voltage level of the battery. See
“Checking Battery Power” on Page 12.
IU (In-Use) Indicator
Flashes when a call is in progress.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 9 Wednesday, July 21, 1999 1:38 PM
NS (No Service) Indicator
Flashes if the phone is beyond the range of the cellular ser-
vice area, meaning calls cannot be made or received. See
“Signal Strength/Service Area” on Page 15.
RM (Roam) Indicator
Flashes if the phone is accessing a service area outside of
your home system (roaming). See “Roaming” on Page 49.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 10 Wednesday, July 21, 1999 1:38 PM
USING THE BATTERY
Warning:
A detached battery could cause property damage,
injury, or burns if a metal object (such as a pen spring, bead-
ed chain, or piece of jewelry) contacts the battery’s terminals
and causes a short circuit. Be careful when placing a charged
battery inside a coat pocket, purse, or other container that
might contain metal objects.
Caution:
Nickel-cadmium (NiCd) batteries must be recycled
or disposed of properly. (You can put them in the battery re-
cycling box at your local RadioShack store.) They must not
be disposed of in municipal waste.
INSTALLING THE BATTERY
Align Here
Latch
1. Place the battery flat against the back of the phone and
align the top of the battery below the raised arrows.
2. Slide the battery toward the top of the phone until it
snaps into place.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 11 Wednesday, July 21, 1999 1:38 PM
To remove the battery, be sure the phone is turned off, then
press the latch at the top of the battery and slide the battery
toward the bottom of the phone until it stops. Then lift the bat-
tery off the phone.
Note: If you have an extra charged battery and the currently
installed battery becomes low during a call, you can change
the battery without ending the call or losing the connection.
See “Replacing a Battery During a Call” on Page 13.
CHARGING THE BATTERY
The nickel-cadmium battery supplied with your telephone is
shipped in a discharged state to extend the battery’s life. It
must be fully charged before you can use your phone.
We recommend that you charge a new battery overnight, but
no longer than 24 hours, using the AC charger supplied with
your phone. Recharging time varies based on the type of bat-
tery and the amount of charge left in the battery. See “Rec-
ommended Recharging Times” on Page 12.
Follow these steps to charge the supplied (or any approved)
battery using the charger supplied with your phone.
1. Install the battery on the phone.
2. Insert the charger’s flat plug into the charging jack on the
bottom of the phone.
Note: The plug fits into the jack only one way. If you
have difficulty inserting the plug, turn it over and try
again. Do not force it!
3. Plug the charger’s power cord into a standard AC outlet.
The battery charge indicators appear.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 12 Wednesday, July 21, 1999 1:38 PM
Notes:
•
You can use the phone while it is charging, but charg-
ing takes longer.
•
For fastest charging, be sure the phone is turned off if
you are not expecting a call.
4. When the battery is fully charged, disconnect the charger
from the AC outlet. Then press in the clips on the sides
of the plug and pull it away from the phone to disconnect
the charger.
Recommended Recharging Times
Approximate
Battery Type
Charging Time
(Hours)
NiCd Slim
21/2
31/4
41/4
51/2
NiCd Slim Extra Capacity
NiCd Standard (supplied)
NiCd Extra Capacity
CHECKING BATTERY POWER
The phone displays a graduated set of up to three battery lev-
el indicators (
) when it is turned on. The more indicators
that appear, the higher the battery’s current charge level.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 13 Wednesday, July 21, 1999 1:38 PM
To see a more detailed indication of the battery’s charge level
FCN
GHI
at any time, press
4 . The battery strength meter ap-
pears on the display for about 5 seconds. Read this meter in
the same way.
When battery power becomes low, the phone displays Lo
bAt and sounds a warning tone every few seconds. When
power becomes too low for the phone to operate, it automati-
cally turns off. Recharge the battery as soon as possible.
Note: Rechargeable batteries last longer and perform better
if occasionally allowed to fully discharge. You can do this by
leaving the phone on until the phone automatically turns off or
you can use the battery discharge feature of any approved
accessory available for your phone. Do not try to discharge
the battery by any other means.
REPLACING A BATTERY
DURING A CALL
If you have an extra charged battery and the currently in-
stalled battery becomes low during a call, follow these steps
to change the battery without ending the call or losing the
connection.
1. Tell the other party on the line what you plan to do (tell
them, for example, that they will hear some noise as you
remove the battery and you will call back if for any rea-
son you lose the connection).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 14 Wednesday, July 21, 1999 1:38 PM
2. Remove the battery, and within 3 seconds, install the
fresh battery. Your call is still on the line.
Note: If you do not complete Step 2 within 3 seconds,
the call disconnects.
IMPORTANT BATTERY TIPS
• Use only the supplied charger and use only batteries
designed for this phone.
• You can purchase additional standard or extended
capacity batteries through your local RadioShack store.
• When you are not using the charger, disconnect it from
power. Do not leave the battery connected to the charger
and AC power for more than 24 hours, since overcharg-
ing could shorten the battery’s life.
• When the battery is not in use, store it uncharged in a
cool and dark place.
• The battery is a sealed unit with no serviceable parts. Do
not try to open the case.
• For the best results, be sure the battery is at or near
room temperature when you charge it.
• A battery can be charged and discharged hundreds of
times, but it eventually wears out. When the operating
time (talk time and standby time) is noticeably shorter
than normal, get a new battery and recycle or properly
dispose of the old one.
• Do not dispose of batteries in a fire.
• Never use any charger or battery that is damaged or
worn out.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 15 Wednesday, July 21, 1999 1:38 PM
BASIC OPERATION
TURNING THE PHONE ON/OFF
PWR
To turn on the phone, flip open the cover then press
.
The phone performs a short self test and sounds a tone, the
keypad backlight turns on for about 17 seconds, and onap-
pears. The phone is ready to use when NS(no service) dis-
appears (see “Signal Strength/Service Area”).
Notes:
• The keypad backlight turns on for about 15 seconds
every time you press a key, then it turns off and all but
the green signal strength indicator disappear from the
display to conserve battery power. When the phone is
locked (see “Locking Your Phone” on Page 36), how-
ever, the phone’s display goes completely blank about
15 seconds after you press the last key.
• During battery charging, the keypad backlight does not
turn off and the display does not change or go blank
when the phone is turned on and unlocked.
PWR
To turn off the phone, press
blank.
again. The display goes
SIGNAL STRENGTH/SERVICE AREA
The phone always displays a green signal strength meter
when it is turned on to indicate the strength of the cellular sig-
nal currently being received. The more bars that appear on
the meter, the stronger the signal.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 16 Wednesday, July 21, 1999 1:38 PM
Notes:
• If few or no bars appear (meaning the signal strength is
weak) and you want to make or receive a call, move the
phone to a different location so the signal strength
increases.
• When all other display characters disappear to conserve
battery power, the signal strength meter flashes and
scrolls its bars.
If NS(no service) appears on the upper left side of the dis-
play, the phone is outside the cellular service area and you
cannot make or receive calls until you reach an area with ser-
vice your phone can use.
MAKING A CALL
1. Extend the antenna, flip open the cover, and be sure the
phone is on (onand other indicators appear).
2. Press the number keys to enter the phone number you
want to dial (including the area code, if necessary). The
numbers appear on the display as you press them.
Notes:
CLR
•
•
If you make a mistake, repeatedly press
to delete
CLR
one digit at a time, or hold down
its.
to delete all dig-
The phone can display up to 10 characters at once. If
you enter (or display a message containing) more
than 10 characters, the characters automatically scroll
RCL
off the left side of the display. Press
at any time
to recall the overflow characters. See “Any Number
Longer Than 10 Digits” on Page 23.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 17 Wednesday, July 21, 1999 1:38 PM
3. Press SND to call the phone number. IU(in use) flashes
g
and diALin then the number called appear briefly,
then onreappears.
4. To end the call, press END.
Note: Closing the cover does not end or disconnect the call.
System Busy Message
In addition to the normal busy signal you hear when a num-
ber you call is busy, your phone sounds tones and displays
these messages to indicate that it cannot complete a call.
Tone
You See
Description
Fast Busy
The cellular system is
busy.
snd to
rEdiAL
High/low
The cellular system
could not complete the
call.
snd to
rEdiAL
When either of these conditions occur, you can press SND
again to redial the number immediately (see “Using Automat-
END
ic Redial” on Page 22), or press
again.
then dial the number
17
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 18 Wednesday, July 21, 1999 1:38 PM
ANSWERING A CALL
When the phone receives an incoming call, it rings and CALL
flashes on the display. To answer the call, press SND. To end
END
the call, press
.
Notes:
• Your phone can receive calls even if the antenna is not
extended. For optimum performance or if the signal
strength becomes weak, however, extend the antenna.
• If you subscribe to calling line ID service through your
cellular carrier, you can view the calling party’s phone
number on the phone’s display. See “Viewing/Recalling
Messages” on Page 41.
• If your phone receives a call but the signal strength is too
weak to support it, CALLappears and the phone sounds
a series of beeps. The caller hears the standard “cus-
tomer not available” message. If this happens, press
CLR
to clear CALLfrom the display.
Missed Call Message
If your phone is on and receives a call, but you do not answer
it, CALL appears on the display for about 15 seconds after
the calling party hangs up. The next time you press any key
CLR
PWR
END
(except
,
, or
), CALL reappears for about 15
seconds to notify you that you missed a call.
CLR
END
To clear CALLfrom the display, press
or
.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 19 Wednesday, July 21, 1999 1:38 PM
ADJUSTING THE VOLUME
Adjusting the Earpiece Volume
To increase or decrease the earpiece volume during a call,
VOL
hold down
. As you hold down the key, the volume in-
creases or decreases (depending on the last adjustment you
made) and the phone displays the volume meter for about 8
seconds. The more bars that appear on the meter, the higher
the volume.
To adjust the volume in the other direction (if the volume is
getting louder, for example, and you want it to be softer) re-
VOL
lease
then hold it down again within 8 seconds.
Adjusting the Ringer Volume
To increase or decrease the ringer volume at any time, press
FCN
VOL
then hold down
until you hear the desired ring vol-
ume. As you hold down the key, the phone sounds a gradual-
ly louder or softer ring tone (depending on the last adjustment
you made) and displays the volume meter for about 8 sec-
onds. The more bars that appear on the meter, the louder the
ringer sounds.
To adjust the volume in the other direction (if the ring tone is
getting louder, for example, and you want it to be softer) re-
VOL
lease
then hold it down again within 8 seconds.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 20 Wednesday, July 21, 1999 1:38 PM
Using Mute
To turn off the phone’s microphone during a call so the other
party on the phone cannot hear you (so you can talk privately
FCN
with someone else in the room, for example), press
MNO
6
. MUtEappears.
FCN
MNO
6
To turn the microphone on again, press
again so
MUtEdisappears.
Hint: To help you remember which key to use, note that “M”
MNO
6
(for mute) appears on the
key.
Note: Pressing END to end a call also turns the microphone
back on.
MAKING EMERGENCY CALLS
Your phone is preprogrammed to let you dial your local emer-
gency number (such as 911) at the press of a single button,
even if the phone is locked (see “Locking Your Phone” on
Page 36). Before you can use this feature, however, you
must first program the emergency number you want to use in
memory location 01 of your phone. See “Storing Speed Dial
Numbers” on Page 31.
To place an emergency call once you have stored the emer-
1
gency number, simply hold down
for about 1 second.
g
The phone displays EMr CYand dials the emergency num-
ber.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 21 Wednesday, July 21, 1999 1:38 PM
Important Notes:
• If you disabled the emergency display (see “Disabling
the Emergency Display” on Page 29), the phone does
g
not display EMr CY when you make emergency calls
using the
1 key.
• When you make an emergency call, give your name and
cellular phone number, as well as the location of the inci-
dent. Remember that your phone might be the only
means of communication at the accident scene. Do not
end the call until you are advised you may do so.
REDIALING NUMBERS
Redialing the Last Number Called
Your phone always stores the last phone number you called.
To recall and redial this number, follow these steps.
RCL
OPER
OPER
1. Press
0
0 . (location 00) and the most recent
number called flashes on the display.
2. To redial this number while it appears on the display,
press SND.
CLR
To exit without redialing the number, hold down
clear the display.
to
21
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 22 Wednesday, July 21, 1999 1:38 PM
Using Automatic Redial
To automatically redial a number when you get the cellular
system busy signal (when SndtorEdiALappears), press
SND so rEdiAL appears. The phone automatically redials
the number at regular intervals for up to 4 minutes or until the
call goes through.
If the call goes through, the phone rings once to alert you.
Simply begin your conversation as usual when the other par-
ty answers.
If the call cannot be completed within 4 minutes (and Sndto
rEdiALappears again), you can press SND again to repeat
END
the redial cycle or
to end the call.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 23 Wednesday, July 21, 1999 1:38 PM
DISPLAYING NUMBERS
Your Phone Number
To display your phone number at any time (even while a call
RCL
#
is in progress), simply press
.
Note
: If you have two phone numbers programmed into your
phone (see “Selecting the Active Phone Number” on
RCL
#
Page 45), pressing
tive phone number.
displays only the currently ac-
Any Number Longer Than 10 Digits
Your phone can dial and store numbers of up to 32 digits;
however, the phone can display only 10 digits at once (usual-
ly the last 10 digits of the number). To review the overflow
RCL
characters, press
once. The phone displays the overflow
digits (up to 10 digits at a time), then the last 10 digits reap-
pear.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 24 Wednesday, July 21, 1999 1:38 PM
MENU FUNCTIONS
OVERVIEW
Turning a Function On/Off
Follow these steps to access the functions menu and turn
any of the phone’s functions on or off.
Notes
:
• All functions on your phone (except for the message
reminder tone and emergency call) are preset to off (dis-
abled).
• To exit without changing the setting during Steps 1 and
END
2, or before you press a key in Step 3, press
.
FCN
1
1. Press
to access the functions menu. The first
function’s name and status appear (such as OnEMIn
tMrOFFfor “one-minute timer is off”).
#
2. To select a different function, repeatedly press
to
scroll forward or to scroll backward through the
menu until that function and its current status appear.
STO
3. Within 2 minutes, press
to turn the selected function
CLR
on or
to turn the function off.
Note:
A few seconds after you display the function name
and status (Step 1 or 2), the phone alternately displays
StO-On then CLr-OFF as a prompt to remind you
about what key to press.
4. To turn another function on/off, repeat Steps 2 and 3.
The phone automatically exits the functions menu about
2 minutes after you last press a key. To exit sooner,
END
press
.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 25 Wednesday, July 21, 1999 1:38 PM
Function Status Quick-Review
Follow these steps to perform a quick-review of all functions
currently enabled on your phone.
Notes:
• When you do a quick-review, your phone shows only
those functions for which the default setting has been
changed. Since the message reminder tone and emer-
gency dialing functions have a default setting of “on”
(enabled), they appear in a quick-review only if they
have been disabled.
• The setting Auto HF On (auto hands-free on) always
appears during a quick-review, but you cannot change
the phone’s hands-free setting. See “Using the Phone
with Handsfree Equipment” on Page 51.
• If your phone is set to use the home cellular system type
(see “Setting the Cellular System Type” on Page 46,
HOME appears as one of the settings during a quick-
review.
FCN
RCL
OPER
WXY
0
9
1. Press
. The abbreviation for the first
enabled function (such as OnEMIn tMr On for “one-
minute timer is on”) appears on the display.
Notes: See “Display Message Glossary” on Page 60 for
a complete list of function abbreviations.
#
2. Repeatedly press
or
to scroll forward or
backward through all other enabled functions (if any).
3. The phone automatically exits the quick-review about 8
seconds after you last press a key. To exit sooner, press
END
.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 26 Wednesday, July 21, 1999 1:38 PM
Functions List
See
Page
Display Shows
Function Description
OnEMIn tMr
Onor OFF
Phone beeps once every
minute during a call to remind
you how long you have been
on the phone
27
g
y
rin Er St LE Sets the phone to use one of
27
and a number
nine different ringer styles
from 1–9
Auto AnSr
Onor OFF
Sets the phone to automati-
cally answer after two rings
28
37
Auto Lock
Onor OFF
Sets the phone to automati-
cally lock when you turn
power off
g
EMr CY CALL Disables/enables the emer-
29
30
Onor OFF
gency dialing function
g
rEMInd MS
On or OF
Sets the phone to alert you of
messages received (with
optional messaging services)
SELEct LAn- (Function not available on this
N/A
50
g g
uA
phone)
Onor OFF
Pin inActiv Sets the phone to automati-
or Activ
cally send a cellular PIN with
the second press of the SND
button
26
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 27 Wednesday, July 21, 1999 1:38 PM
USING THE MENU FUNCTIONS
Using the Call-Time Reminder Tone
The call-time reminder function lets you set the phone to
sound a subtle tone about 50 seconds after you place or an-
swer a call, then once every minute after that, to remind you
of how long you have been on the phone. Follow these steps
to enable or disable the call-time reminder tone.
FCN
1
1. Press
2. Press
3. Press
.
#
. OnEMIntMrOnor OFFappears.
CLR
STO
so On appears (to enable) or
so OFF
appears (to disable).
END
4. Press
to exit the function menu.
Changing the Ringer Style
Your phone has 9 different ringer styles for you to choose
from (to help you distinguish your phone’s ring from that of
another phone, for example). Follow these steps to change
the ringer style.
FCN
1
1. Press
.
#
2. Repeatedly press
or
until the phone displays
g
y
rin Er St LE and a number from 1–9 (the last
selected ringer style).
STO
3. Press
. The phone sounds the currently selected
ringer style, then it displays SELEct1–9.
1
WXY
9
4. Press the number keys (
–
) on the phone’s key-
pad to hear the various ringer styles (or repeatedly press
#
or
to scroll backward or forward and hear
27
each of them).
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 28 Wednesday, July 21, 1999 1:38 PM
5. When you hear the ringer style you want to use, press
STO
to select it. The phone displays ringEr n SEt
(where nis the number of the ringer style you selected).
END
6. Press
to exit the function menu.
Using Automatic Answer
The automatic answer function lets you set the phone to au-
tomatically answer incoming calls without you having to press
a key. When automatic answer is enabled and the phone re-
ceives a call, it rings twice then automatically answers the
call. Begin your conversation as usual.
Follow these steps to turn the automatic answer function on
or off.
FCN
1
1. Press
.
#
2. Repeatedly press
or
until AutoAnSrOFF
or Onappears.
CLR
STO
3. Press
so On appears (to enable) or
so OFF
appears (to disable).
END
4. Press
to exit the function menu.
Note: If automatic answer is enabled and you set the phone
to use a ringer style such as number 6 (see “Changing the
Ringer Style” on Page 27), which sounds four chirps per ring,
remember that the phone answers only after two rings (two
sets of four chirps, in this case).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 29 Wednesday, July 21, 1999 1:38 PM
Disabling the Emergency Display
g
Your phone is preset to display EMr CY when you hold
1
down
to make an emergency call; however, you can set
g
the phone so EMr CYdoes not appear (if you did not store
an emergency number in memory 01, for example).
Follow these steps to disable (or enable) the emergency dis-
play.
FCN
1
1. Press
.
g
#
2. Repeatedly press
or
until EMr CYCALLOn
or OFFappears.
CLR
STO
3. Press
so OFF appears (to disable) or
so On
appears (to enable).
END
4. Press
to exit the function menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 30 Wednesday, July 21, 1999 1:38 PM
Using Message Reminder Tones
If your cellular carrier offers a special messaging service, and
you subscribe to that service, your phone is preset to beep
every 2 minutes until you read all new messages.
Notes:
• If you do not subscribe to a messaging service, the
reminder tone function has no effect on your phone.
• To view the message data sent to your phone by your
cellular carrier, see “Viewing/Recalling Messages” on
Page 41.
Follow these steps to disable or enable the message remind-
er tones.
FCN
1
1. Press
.
g
#
2. Repeatedly press
or
until REMIndMs On
or OFFappears.
CLR
STO
3. Press
so OFF appears (to disable) or
so On
appears (to enable).
END
4. Press
to exit the function menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 31 Wednesday, July 21, 1999 1:38 PM
USING MEMORY
Your phone has 40 speed-dial memory locations that can
each hold a phone number of up to 32 digits.
STORING SPEED DIAL NUMBERS
Note:
If you are unable to complete Steps 2 and 3 within 2
minutes, the phone exits the procedure and its display goes
STO
END
blank to conserve battery power. Press
over at Step 2.
, then start
1. Clear the display (if necessary), enter the phone number
STO
you want to store, then press
. The phone displays
LocATn(location) _ _.
2. Within 2 minutes, enter the two-digit memory location
number (01–40) where you want to store the phone
number. The display confirms the memory location you
have chosen.
Notes:
•
•
Remember that your phone uses memory location 01
for one-touch emergency dialing. Store only your local
emergency number (such as 911) in that location.
If you enter an invalid number (such as 41), the phone
displays invALid LocATn, then LocATn _ _
reappears. Try again.
3. If you previously stored information in the selected mem-
ory location, or if the phone’s memory is full, the selected
location number and FULL appear briefly, then the
phone displays the currently stored number followed by
g
ChAn E?.
STO
STO
END
To select a different memory location, press
,
.
enter the new memory location number, then press
31
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 32 Wednesday, July 21, 1999 1:38 PM
To use the selected memory location and replace the
STO
information currently stored there, press
.
ONE-TOUCH DIALING
To quickly place a call to any number stored in memory loca-
SND
tions 2 or 3 (without pressing
number key for about 1 second.
), simply hold down that
SPEED RECALL/DIALING
If you know the memory number you want to use, simply en-
ter that number (such as 07), then press SND to quickly place
the call.
If you know the memory number you want to use, but you
want to review the stored information (just to be sure!) before
RCL
you place the call, press
then enter the memory location
number. The location number and phone number flash on the
SND
display. To place the call, press
.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 33 Wednesday, July 21, 1999 1:38 PM
MEMORY SCROLLING/DIALING
RCL
1. Press
.
OPER
0
1
2. Press
to start scrolling from the first memory
location, or enter a specific memory number (such as 11)
that you want to start from. The location number followed
by ’(to indicate scrolling is active) and the stored phone
number flash on the display.
Note:
If the memory location you selected is unused, the
location number (03’, for example) appears steadily.
#
3. Repeatedly press
or
to scroll forward or
backward through the numbers.
SND
4. When you see the number you want to use, press
to place the call.
For convenience (so you can see if you have a caller’s phone
number, for example), your phone lets you scroll through
memory while a call is in progress. Simply follow these steps,
END
SND
when you finish.
but press
instead of
33
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 34 Wednesday, July 21, 1999 1:38 PM
CHANGING A NUMBER IN MEMORY
1. Recall the number that you want to change.
CLR
2. Repeatedly press
to backspace and erase digits,
then enter the correct numbers; or simply add digits to
STO
the existing number. Then press
digit location number.
and enter the two-
3. The selected location number and FULLappear briefly,
then the phone displays the currently stored number fol-
g
lowed by ChAn E?.
STO
Press
again within 2 minutes to store the edited
number. The memory location number appears on the
display to confirm the entry.
END
To exit without changing the number, press
.
CLEARING A MEMORY
CLR
STO
1. Press
, then enter the two-digit memory loca-
tion number you want to clear.
2. The selected location number and FULLappear briefly,
then the phone displays the currently stored number fol-
g
lowed by ChAn E?.
STO
To clear the selected memory, press
. The selected
memory location number appears on the display to con-
firm the entry.
END
To exit without clearing the selected memory, press
.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 35 Wednesday, July 21, 1999 1:38 PM
USING SCRATCHPAD MEMORY
Your phone’s scratchpad memory lets you temporarily store a
telephone number on the display during a call. This is handy,
for example, when someone gives you a number during a call
and you don’t have a place to write it down.
To store a number in the scratchpad memory during a call,
simply press the keys to enter that number. After you press
END
to end the call, you can press SND to immediately dial
the scratchpad memory number.
Note
: Be sure to tell the other party on the call that they will
hear tones as you press the keys to enter the number.
MEMORY DIALING TIPS
Frequently Dialed Area Codes/Prefixes
To reduce the number of keystrokes you use to dial frequent-
ly called area codes and/or prefixes, store that area code
and/or prefix (including the 1, if necessary) in memory. To
dial a number using that memory, simply recall that memory,
enter the remaining digits of the telephone number you are
calling, then press SND to place the call.
Banking or Other Phone Services
For convenience, you can store in your phone’s memory the
touch-tone command sequences you use when calling your
bank or other phone services. See “Using Touch-Tone Ser-
vices” on Page 51.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 36 Wednesday, July 21, 1999 1:38 PM
SECURITY FEATURES
LOCKING YOUR PHONE
To prevent unauthorized use of your phone, you can enter a
three-digit code to lock your phone at any time (see “Using
Manual Lock”). For added convenience, you can also set the
phone to automatically lock every time you turn it off (see
“Using Automatic Lock” on Page 37).
When the phone is locked, Loc’dappears when you press
PWR
any key (except
). When the phone is locked and re-
ceives a call, it rings as usual. To answer the call, you must
enter the lock code and then press SND.
Your phone’s preset lock code is 123
. For added security,
you can change the code to one that you can easily remem-
ber. See “Changing the Lock Code” on Page 37.
Note
: If you lock your phone then forget the lock code, you
can enter a six-digit security code to display the lock code.
See “Displaying the Lock Code” on Page 38.
Using Manual Lock
Follow these steps to lock or unlock your phone at any time.
FCN
JKL
5
1. Press
, then hold down
. The phone displays
Loc?.
STO
2. To lock your phone, press
Loc’dappears on the display.
within 8 seconds.
END
To exit without locking the phone, press
.
STO
Note
: If you do not press
within 8 seconds, your
phone automatically exits the lock program without lock-
ing the phone.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 37 Wednesday, July 21, 1999 1:38 PM
The phone remains locked until you unlock it. To unlock your
phone, simply enter the three-digit lock code. If you make a
CLR
mistake, press
then try again.
Using Automatic Lock
The automatic lock feature lets you set your phone to auto-
matically lock each time you turn it on. When automatic lock
is enabled, Loc’dappears after the self test when you turn
on the phone. You can unlock the phone as usual at anytime.
Follow these steps to enable or disable automatic lock.
FCN
1
1. Press
.
#
2. Repeatedly press
or
until the phone displays
AutoLockOnor OFF.
CLR
STO
3. Press
so On appears (to enable) or
so OFF
appears (to disable).
END
4. To exit the function menu, press
.
Changing the Lock Code
For added security, you can change the lock code, but you
must enter a preset 6-digit security code first. Your phone’s
preset security code is 000000 (you cannot change this
code).
Follow these steps to change your phone’s lock code.
Note: The phone’s display does not change (no characters
STO
appear when you press the keys) until you press
4.
in Step
FCN
OPER
0
1. Press
.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 38 Wednesday, July 21, 1999 1:38 PM
2. Enter the six-digit security code.
3. Enter the new three-digit lock code you want to use.
g
STO
4. Press
. The phone displays ChAn Edtoand the
new lock code.
CLR
5. When you finish, hold down
for about 1 second to
clear the lock code from the display.
Displaying the Lock Code
If you change your lock code then forget it, you can use your
phone’s preset security code (000000) to display the current
lock code.
Follow these steps to display the current lock code.
Note: The phone’s display does not change (no characters
RCL
appear when you press the keys) until you press
3.
in Step
FCN
OPER
0
1. Press
.
2. Enter the six-digit security code.
RCL
3. Press
. The phone displays LocCodeand the cur-
rently set three-digit lock code.
CLR
4. When you finish, hold down
for about 1 second to
clear the lock code from the display.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 39 Wednesday, July 21, 1999 1:38 PM
USING THE SERVICE RESTRICTION
Your phone is preset to let you (or anyone else) dial any type
of number (local or long distance) and freely access any in-
formation stored in its memory. To prevent unauthorized use
of your phone, however, you can enter your phone’s preset
000000
security code (
) and set this service restriction.
Service
Level
Description
1
4
Calls can be placed only to numbers
stored in memory locations 01–10 by
RCL
pressing
, the memory number, then
SND
. Otherwise, the keypad is locked. The
memory cannot be changed.
No restrictions (default setting).
Note
: Your phone is preset to service level 4.
Follow these steps to change the service restriction level on
your phone.
FCN
OPER
0
1. Press
.
2. Enter the six-digit security code.
3. Enter the service level (1 or 4) you want to use.
STO
4. Press
. The phone displays SErvicE LEvEL n,
where nis the service level number you entered (such
as SErvicELEvEL4).
39
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 40 Wednesday, July 21, 1999 1:38 PM
SPECIAL FEATURES
USING THE MESSAGING FUNCTIONS
Some cellular systems provide services that can send calling
line ID and voice mail notification to your phone. Your phone
is preprogrammed to work with these services.
Note:
In order to use these functions on your phone, your
cellular carrier must provide, and you must subscribe to,
these services. Otherwise, selecting or setting them will have
no effect. For more information about these services, call
your cellular carrier.
Overview/Receiving Messages
When your phone is turned on and receives calling line ID or
voice mail notification data from your cellular carrier, it alter-
nately displays:
You See
Meaning
xx nEW
Number (xx) of new messages received
YY totAL
Total number (YY) of messages currently
stored in the message stack
Your phone stores each message in a special memory area
called the “message stack.” The message stack can hold up
to 20 messages at once, with messages stored in order from
newest (memory position 1) to oldest (memory position 20).
40
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 41 Wednesday, July 21, 1999 1:38 PM
Notes:
• If the message stack is full (20 messages are currently
stored) and the phone receives a new message, it auto-
matically stores the new message and deletes the oldest
message in the stack.
• Your phone does not receive messages while it is turned
off. Contact your cellular carrier to find out how the car-
rier handles undeliverable/queued messages.
Viewing/Recalling Messages
Follow these steps to view or recall a message.
RCL
1. Press and release
, then hold it down for about 1
second. The phone displays the first (newest) message
in the stack.
If the message is a calling line ID message, the phone
briefly displays cIdyy(where yy is the message num-
ber) then the number of the party that called (up to 14
characters).
If the message is voice mail notification, the phone dis-
plays the message data (such as a message number
and/or number of total/new messages waiting) sent by
your cellular carrier. The type and format of the message
waiting information sent varies by carrier — contact your
cellular carrier for more information.
Note: If there are no messages in the stack, the phone
g
displays no MS S for about 8 seconds then exits the
CLR
message display. To exit sooner, press
.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 42 Wednesday, July 21, 1999 1:38 PM
2. To view another message, repeatedly press
(to
#
scroll backwards) or
message appears.
(to scroll forwards) until that
END
3. When you finish, press
tion.
to exit the message func-
Deleting Messages
To delete an individual message, recall that message, then
CLR
hold down
until the phone displays dELEtEd.
To delete all messages in the stack, while viewing any mes-
CLR
sage, hold down
until the phone displays dELEtEd
CLR
(briefly) then ErASEALL. Then press
again to confirm
the deletion.
END
When you finish, press
to exit the message function.
USING THE CALL TIMERS
Your phone has three call timers that let you check the length
of your calls (“air time”):
• Individual call timer — times each call you make or
answer in minutes and seconds, and automatically
resets each time you make or answer a call or turn off
the phone. See “Displaying the Individual Call Timer” on
Page 43.
• Resettable call timer — times all the calls you make or
answer in minutes, and it can be reset at any time. See
“Using the Resettable Call Timer” on Page 44.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 43 Wednesday, July 21, 1999 1:38 PM
• Cumulative call timer — times the calls you make or
answer in minutes, and it cannot be reset. See “Display-
ing the Cumulative Call Timer” on Page 44.
Notes:
• Each call timer begins counting when you hear the first
ring (during an outgoing call) or when your phone rings
to signal an incoming call.
• If your phone receives a call but you do not answer it,
each timer resets to the time it had before it received that
incoming call.
Displaying the Individual Call Timer
The individual call timer tracks each call you make in minutes
and seconds, and automatically resets each time you make
or answer a call or when you turn off the phone.
RCL
To display the individual call timer for the last call, press
#
#
. The air time of your last call (such as 0045to
show 45 seconds) appears for about 15 seconds. Press any
key to clear the display sooner.
RCL
#
#
If you press
during a call, the air time of the
call flashes on the display until you clear the display or end
the call.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 44 Wednesday, July 21, 1999 1:38 PM
Using the Resettable Call Timer
The resettable call timer tracks the calls you make or answer
in minutes, and it can be reset at any time. You can reset this
timer to coincide with your cellular billing statement date, for
example, then track your monthly air time.
RCL
#
#
To display the resettable call timer, press
#
. rESEtbL(resettable) and the number of air time min-
utes accumulated since you last reset the timer appear.
FCN
OPER
PRS
0
7
To reset the timer while it is displayed, press
CLR
.
To clear the timer from the display, press any key.
Displaying the Cumulative Call Timer
The cumulative call timer tracks all the calls you make or an-
swer in minutes. It cannot be reset.
RCL
#
#
To display the cumulative call timer, press
,
#
#
. CUMULand the number of air time minutes accu-
mulated since the first call was made or answered on your
phone appears. Press any key to clear the timer from the dis-
play.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 45 Wednesday, July 21, 1999 1:38 PM
SELECTING THE ACTIVE PHONE
NUMBER
If you subscribe to two cellular services (for example, com-
petitive cellular systems in your area or cellular systems in
different cities), your dealer programs your phone with two
different phone numbers.
If you have two phone numbers programmed into your
phone, the phone displays one of the following messages
each time you turn it on, to indicate which cellular system
type and phone number are currently active.
Phone
Number
Cellular System Type
Display Shows
1
2
1
2
Non-wireline (type A)
Non-wireline (type A)
Wireline (type B)
A1
A2
b1
b2
Wireline (type B)
Note
: To set the cellular system type, see “Selecting the Cel-
lular System Type” on Page 48.
To deactivate the phone number currently selected and acti-
RCL
STO
#
vate the other phone number, press
. The dis-
play briefly blanks, then the currently active number appears
to confirm your selection. To clear the display when you fin-
CLR
ish, press
.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 46 Wednesday, July 21, 1999 1:38 PM
Notes:
• Calls can be made on your phone from only one phone
number at a time, and you cannot activate the other
phone number while a call is in progress.
• To receive calls on both numbers at the same time (if you
subscribe to no-answer transfer or call forwarding ser-
vice through your cellular carrier), you can set both num-
bers to forward to the other number if not answered.
Otherwise, a caller who calls the inactive number
receives the standard “not in service” message.
SETTING THE CELLULAR
SYSTEM TYPE
Each cellular market area has two cellular service providers.
One of the providers is designated Provider A and the other
Provider B. When your phone is activated for service, find out
from your dealer whether your cellular provider is type A or B.
Notes:
• Usually, it is less expensive to use the same company for
cellular service when you are in your home city and
when you roam (see “Roaming” on Page 49). To do this,
you need to know whether your cellular service provider
is type A or B in your home city and in each city where
you plan to travel.
• It is possible for a cellular service provider to be (or have
agreements with) Provider A in some cities and Provider
B in others.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 47 Wednesday, July 21, 1999 1:38 PM
Your phone’s selectable system registration function lets you
select one of seven possible roaming modes:
Roaming Mode Description
— the phone first seeks a home type
Display
Standard Mode
system, then it seeks a non-home type.
If you are using a type A (non-wireline) home system
Std Ab
Std bA
If you are using a type B (wireline) home system
— the phone first seeks a
Invert Preference Mode
non-home type system, then it seeks a home type.
(Select this setting while on the fringe of your home
area or in certain roaming situations.)
If your home system is non-wireline (type A):
SCAnbA
SCAnAb
•
•
•
flashes rapidly — call on system B
flashes slowly — call on home type system
flashes slowly — call on home system
RM
RM
IU
If your home system is wireline (type B):
•
•
•
flashes rapidly — call on system A
flashes slowly — call on home type system
flashes slowly — call on home system
RM
RM
IU
— the phone will not operate out-
side your home system.
Home Only Mode
HOME
— the phone will operate only within
non-wireline (A) systems.
Scan A Mode
SCAn A
SCAn b
P SCAn
— the phone will operate only within
wireline (B) systems.
Scan B Mode
— the phone automatically scans for one
SID Mode
or more preferred systems to use
one or more
and
systems
to use. System IDs must be prepro-
not
grammed by dealer; preferred system (SID) feature
requires special service (contact your cellular car-
rier).
47
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 48 Wednesday, July 21, 1999 1:38 PM
Displaying the Currently Selected
System Type
To display the system type currently selected on your phone,
RCL
press
. The currently selected system type (such as
HOME) appears for about 8 seconds. To clear the display
END
sooner, press
.
Selecting the Cellular System Type
Note: If you are unable to complete Steps 2 and 3 within 8
seconds, the display clears without changing the system
type. Start at Step 1 and try again.
RCL
1. Press
. The currently selected system type
appears.
#
2. Repeatedly press
type you want to use.
or
until you see the system
STO
3. Press
to store the displayed system type. SEt
appears to confirm the change.
END
To exit without changing the system type, press
.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 49 Wednesday, July 21, 1999 1:38 PM
ROAMING
In some areas, the cellular system’s computer automatically
recognizes roaming telephones. In other areas, you must
contact the service provider before it can recognize your
phone. The operator needs to know your telephone number,
your phone’s ESN (Electronic Serial Number), and how you
plan to pay for your calls. There is normally an additional
charge for roaming calls.
Note
: Your phone’s ESN is under the phone’s battery; how-
ever, the roaming cellular service provider can usually auto-
matically determine your phone’s ESN when you call.
When you roam, RMflashes slowly on the display when the
phone is using a home-type cellular system. The indicator
flashes rapidly when the phone is using a cellular system that
is different from your home system.
USING CELLULAR SYSTEM
PIN DIALING
Your cellular carrier might require that you use a personal
identification number (PIN) when you make calls. This num-
ber assures the cellular system that the person placing the
call is an authorized user.
Contact your cellular service provider to determine if a PIN is
required and obtain the PIN (seven digits or less) to place
calls through the cellular system you subscribe to. If a PIN is
required, follow the steps in “Storing Speed Dial Numbers” on
Page 31 to store your PIN in memory 07, then follow the
steps in “Enabling/Disabling PIN Dialing” on Page 50 to en-
able PIN dialing on your phone.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 50 Wednesday, July 21, 1999 1:38 PM
Notes:
• Enable PIN dialing on your phone only if it is required by
your cellular provider.
• You must store your PIN in memory 07, otherwise your
phone cannot properly make calls through your cellular
system.
• If you enter a service area which does not require PIN
dialing, disable PIN dialing on your phone.
Enabling/Disabling PIN Dialing
FCN
1. Press
1 .
#
2. Repeatedly press
or
until the phone displays
PininActivor Activ.
CLR
STO
3. Press
so Activ appears (to enable) or
so
inActivappears (to disable).
END
4. To exit the function menu, press
.
Making a Call Using Your PIN
1. With PIN dialing enabled, dial or speed dial the number
you want to call, as usual, then press SND.
2. When you hear the tones (2 beeps), press SND again.
The phone automatically sends your PIN code to finish
dialing the call.
Note: If you did not store your PIN in memory 07, or you
stored an incorrect PIN, InvALId PIn appears. Be sure
your PIN is correct, then try again.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 51 Wednesday, July 21, 1999 1:38 PM
USING THE PHONE WITH HANDSFREE
EQUIPMENT
Your phone is preprogrammed to work with most optional
handsfree equipment in your vehicle that lets you automati-
cally switch from handset to handsfree mode when you place
the phone in the handsfree holder.
Some handsfree equipment might require you to turn off
(mute) the phone’s microphone when switching to handsfree,
using the procedure described in “Using Mute” on Page 20.
See the owner’s manual provided with your handsfree equip-
ment for more information, or contact your local RadioShack
store for assistance.
USING TOUCH-TONE SERVICES
To use your cellular phone to control answering machines
and special telephone services (such as bank-by-phone or
voicemail), simply enter touch-tone commands using your
phone’s keypad after the service answers (and when prompt-
ed).
Or, you can store the service’s command sequence in a
memory location, then follow these steps after the service an-
swers (for each sequence you want to send).
1. Recall the memory location that contains the command
sequence.
RCL
2. Press
SND.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 52 Wednesday, July 21, 1999 1:38 PM
Adding a Pause
Some services, such as voicemail, require you to enter an ac-
cess code then wait before entering additional digits. To in-
clude one or more pauses in a sequence when storing it in
FCN
STO
o
SND
memory, press
so appears, then press
. The
o
phone displays wherever you insert a pause.
STO
Note: If you do not press
within 8 seconds, the display
clears to conserve battery power. If this happens, simply
press the key for the next digit you want to enter or store. The
characters you previously entered appear along with the
pause you just entered.
When you send a sequence with pauses stored in it, the
phone stops at each place in the sequence where you en-
tered a pause. To send the next group of numbers in the se-
SND
quence, press
again.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 53 Wednesday, July 21, 1999 1:38 PM
TROUBLESHOOTING
If the phone’s power does not come on or stay on:
• Make sure the battery is properly installed and charged.
• Be sure the contacts on the battery are clean, If they are
not, clean them with a soft cloth or pencil eraser.
• The battery charge might be too low for operation. Check
the display and listen for the low battery warning tones.
If the power comes on, but the phone does not work:
• Make sure that the antenna is fully extended.
• Be sure you selected the correct cellular system type
(see “Setting the Cellular System Type” on Page 46).
• Make sure that functions you might have previously
selected (but forgotten) are not causing the phone to
operate differently than you expect it to (see “Function
Status Quick-Review” on Page 25).
• Check the display for error messages.
If you see an error message that is not covered in any section
in this Owner’s Manual, or if your phone does not seem to be
operating properly, contact your local RadioShack store for
assistance.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 54 Wednesday, July 21, 1999 1:38 PM
SAFETY INFORMATION
TRAFFIC SAFETY
• Do not use a handheld phone while driving a vehicle. If
using a handheld phone, park the vehicle before taking
or making a call.
• Always secure the phone in its holder; do not place the
phone on the passenger seat or where it can break loose
in a collision or sudden stop.
• Never install a phone alert device that operates your
vehicle’s lights or horn. This is illegal in most areas.
Remember, always put road safety first!
OPERATING ENVIRONMENT
• Remember to follow all special regulations and always
turn off your phone whenever you are required to do so,
or when it might cause interference or be dangerous.
• Any radio transmitting equipment, including cellular
phones, might interfere with inadequately protected
medical devices. Consult a physician or the manufac-
turer of the medical device if you have any questions.
Other electronic equipment might also be subject to
interference.
• As with other mobile radio transmitting equipment, for
your safety, only use your phone in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
• Turn off the phone while getting gasoline (at a filling sta-
tion). Observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants, or around blasting operations.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 55 Wednesday, July 21, 1999 1:38 PM
• Do not store or carry flammable liquids, gases, or explo-
sive materials in the same compartment as a cellular
phone or any of its parts or accessories.
• Only qualified personnel should install or service the
phone in a vehicle. Faulty installation or service might be
dangerous and could invalidate the phone’s warranty.
• Electronic fuel injection systems, electronic anti-lock
braking systems, electronic cruise control systems, and
other electronic systems can malfunction due to the lack
of protection from radio signals. Check regularly that all
cellular phone equipment in your vehicle is mounted and
operating properly.
• Turn off your cellular phone when in an aircraft. The use
of cellular phones in an aircraft might be dangerous to
the operation of the aircraft, disrupt cellular networks,
and is illegal.
Failure to observe these instructions could lead to suspen-
sion or denial of cellular telephone services, legal action, or
both.
EMERGENCY CALLS
IMPORTANT!
This phone, like any cellular phone, operates
using radio signals, cellular, and land-line networks, as well
as user-programmed functions. These factors make it impos-
sible to guarantee connection in all conditions. Therefore, you
should never rely solely upon any cellular phone for essential
communications (such as medical emergencies).
Remember, to make or receive any calls, the phone must be
turned on and in a service area with adequate cellular signal
strength.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 56 Wednesday, July 21, 1999 1:38 PM
You might not be able to make emergency calls on all cellular
phone networks or when certain network services or phone
features are set. Check with your local service providers.
FCC REGULATIONS
A cellular phone might cause TV or radio interference, even
when it is operating properly. The FCC can require you to
stop using your cellular phone if you cannot eliminate the in-
terference. If you need assistance, contact your local Ra-
dioShack store.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the condition that this device does not cause
harmful interference.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 57 Wednesday, July 21, 1999 1:38 PM
CARE AND MAINTENANCE
Your RadioShack CT-501 Handheld Flip-Style Cellular Tele-
phone is an example of superior design and craftsmanship.
The following suggestions will help you care for your phone
so you can enjoy it for years.
• Keep the phone and all of its parts and accessories out
of the reach of children.
• Keep the phone dry. Liquids might contain minerals that
corrode electronic circuits.
• Do not use or store the phone in dusty, dirty areas. its
moving parts can be damaged.
• Do not store the phone in hot areas. Temperature
extremes can shorten the life of electronic devices, dam-
age batteries, and warp or melt plastic parts.
• Do not store the phone in cold areas. When the phone
warms up (to its normal operating temperature), mois-
ture can form inside the phone, which could damage the
phone’s electronic circuits.
• Do not drop, knock, or shake the phone. Rough handling
can break internal circuit boards.
• Wipe the phone with a damp cloth occasionally to keep it
looking new. Do not use harsh chemicals, cleaning sol-
vents, or strong detergents to clean your phone.
Modifying or tampering with the phone’s internal components
can cause a malfunction and invalidate your phone’s warran-
ty and void your FCC authorization to operate it. If your
phone is not performing as it should, take it to your local Ra-
dioShack store for assistance.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 58 Wednesday, July 21, 1999 1:38 PM
SPECIFICATIONS
Dimensions ........................................ 55/8 × 23/8 × 11/2 Inches
Weight (with Supplied Battery) .................................... 9.6 oz
(272 g)
Transmitting Power .................................. 0.6W + 2dB – 4dB
Operating Voltage ...............................................µ5.2–7.5 DC
Internal Battery......................................................... 6.0V DC
Input to AC Charger ................................................ 110V AC
Frequency Band ...................................... 824–849 MHz (TX)
869–894 MHz (RX)
Specifications are typical; individual units might vary. Specifi-
cations are subject to change and improvement without no-
tice.
PATENT INFORMATION
This phone is manufactured under one or more of the follow-
ing U.S. patents.
4121218
4124879
4127824
4128740
4138681
4193036
4254382
4302845
4312074
4327319
4329666
4369516
4369522
4378603
4390963
D269873
4389265
4400584
4617520
D286778
4626309
4628529
4629829
4630304
4630305
4633141
4636593
4636741
D288432
4648125
4649543
D288683
4654655
D289156
4662691
4667333
D295975
4751737
D296187
4761621
4764737
D297734
D297735
4777564
Re32768
D299136
4797929
4798975
4800348
4802236
4809356
4811377
4811404
4827226
4965537
4972355
4972432
4972455
4975808
4984290
D314173
D315330
D315346
D315543
D315559
D315565
5004992
D315907
5008925
D316417
D316859
5017856
D327061
5128834
D328302
5142551
5142696
5146620
5148471
5148473
5148961
5150359
5150384
5152006
5157693
5163159
5164652
5166596
5175759
5175874
5261119
5262710
5263052
5276707
5278994
D343173
5280637
D344087
5287553
5287555
5287556
D344511
5301365
5321847
D348880
5349588
5359696
5361400
58
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 59 Wednesday, July 21, 1999 1:38 PM
4400585
D270835
D271491
Re31470
4431977
4434461
4455534
4462098
D275951
4484153
4485486
4486624
D276809
4491972
D277667
4504834
D278708
4523155
4546329
4550426
4551696
4564821
D282169
4571595
4573017
4574243
4585957
4602218
D284759
D285439
4616314
4668917
4670747
4672502
4680787
4681476
4683585
4692726
4704588
D292578
4706036
D292920
4710724
4711361
4715063
4716319
4716391
4723305
D294257
4727306
4727583
4730195
4734635
4736277
4737976
4740794
4741018
4741034
4742562
D295627
4746242
D295973
4827507
4829274
4837534
D301476
4843621
4845772
D302015
4851966
4868576
4870686
D303656
4876552
4879533
D305427
4896124
4897873
D305717
4904549
4905288
4905301
D306293
D306441
D306594
4912602
4918732
4922178
4945570
4954796
4959851
4963812
4963843
5018188
5020091
5020092
5020093
5028083
5028859
5029044
5029233
5031028
5036532
5053924
5057762
D320780
5059885
5060294
D322783
D322955
5081674
5083304
D324024
D324388
5095503
D325028
D325583
5109536
D325915
5113436
5117450
5121047
5122480
5122722
D332261
5182749
D332785
5185566
5187809
5193223
5195106
5195108
5201069
5204977
5210793
5214675
5222104
5222251
D337332
5230007
5230093
5233633
5235492
5237257
5239127
5241545
5241548
5241650
5241693
5242767
D339582
5249302
5251331
D340710
5260988
5363071
5365549
D352497
5366826
5375143
5375258
5379324
D354055
D354062
5384825
D356084
5402447
5406146
5406562
D357224
D357457
5410741
D357680
D357681
5428836
D359734
D359735
D359959
5432017
D360632
5438684
59
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 60 Wednesday, July 21, 1999 1:38 PM
DISPLAY MESSAGE GLOSSARY
Message
’
Description
See
Page(s)
(Apostrophe) Memory scrolling
active
33
o
Shows a pause stored in memory
Automatic answer
52
28
37
45
Auto Ansr
Auto Lock
A1
Automatic lock
Two-system operation; non-wire-
line system is active, using phone
number 1
Two-system operation; non-wire-
line system is active, using phone
number 2
45
45
45
A2
b1
Two-system operation; wireline sys-
tem is active, using phone number
1
Two-system operation; wireline sys-
b2
tem is active, using phone number
2
Call now being, or was previously,
received
18
31
CALL
g
Memory prompt to caution before
overwriting previously stored infor-
mation
ChAn E?
g
Appears when you change the pre-
set lock code
38
20
ChAn Ed to
g
Emergency call in progress
EMr CY
1
(using
)
g
Emergency dialing display status
Requested memory is full
29
31
25
EMr CY Call
FULL
Handsfree operation enabled
Auto HF On
60
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 61 Wednesday, July 21, 1999 1:38 PM
Message
Description
See
Page(s)
Home system-type selected
47
39
HOME
Service restriction level currently
selected
LEvEl 1 or 4
Appears before lock code
Phone is locked
38
36
13
20
15
27
50
LocCode
Loc’d
Battery power is low
Lo bAt
MutE
Microphone is turned off
Appears when display is clear
Call-time reminder tone
on
OnEMIn tMr
PIN dialing function enabled or dis-
abled
Pin Activ or
inActiv
Specific cellular ID required (sys-
tem-type selected)
47
P SCAn
Automatic redial in progress
Message reminder tones
22
30
47
rEdiAL
rEMInd MSg
SCAn A
Non-wireline A system-type
selected
A then B scan system-type selected
47
47
SCAn Ab
SCAn b
Wireline B scan system-type
selected
B then A scan system-type selected
47
47
SCAn bA
Std Ab
Standard non-wireline system-type
selected
Standard wireline system-type
selected
47
Std bA
61
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 62 Wednesday, July 21, 1999 1:38 PM
NOTES
62
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 63 Wednesday, July 21, 1999 1:38 PM
63
Download from Www.Somanuals.com. All Manuals Search And Download.
17-1110.fm Page 64 Wednesday, July 21, 1999 1:38 PM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in mate-
rial and workmanship under normal use for one (1) year from the date of pur-
chase from RadioShack company-owned stores and authorized RadioShack
franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, IN-
CLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICU-
LAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE
WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PRO-
VIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBIL-
ITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT
TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY
BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or
the exclusion of incidental or consequential damages, so the above limitations or
exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and
the RadioShack sales receipt as proof of purchase date to any RadioShack
store. RadioShack will, at its option, unless otherwise provided by law: (a) correct
the defect by product repair without charge for parts and labor; (b) replace the
product with one of the same or similar design; or (c) refund the purchase price.
All replaced parts and products, and products on which a refund is made, be-
come the property of RadioShack. New or reconditioned parts and products may
be used in the performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period. You will
be charged for repair or replacement of the product made after the expiration of
the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to
acts of God, abuse, accident, misuse, improper or abnormal usage, failure to fol-
low instructions, improper installation or maintenance, alteration, lightning or
other incidence of excess voltage or current; (b) any repairs other than those
provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance
costs; or (f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600,
Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
68P09398A54-A
7/28/97 - RGC
10/97
Printed in the USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|