LCD TV
RLCVD1924
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Please refer to the specification sheet on page 21 for the character of this TV set.
Do not break the earth pin of the plug, if the plug can not fit the electrical outlet,
please turn to the professional for help.
Please unplug the TV power cord when the following conditions occur:
--When there is a thunder storm (Please pull out the power cord and antenna)
--When Cleaning the TV set
--When the TV set not used for a long time.
Do not use corrosive depurative when cleaning the TV set.
Do not put the TV set under direct sunlight or near to the heat.
Do not put the naked light, for example, the lighting candle or the heater, on the top of or
near to the TV set.
Leave plenty of space (at least 1.0cm) around the TV set for ventilation
Put the TV set away from where it can be ruined by the rain or water, (for example, near
the window.)
Do not put the container with liquid (like a vase) on the top of the TV set.
Don't move away the TV set when turning on the power.
Don't touch, push and scratch the surface of TV set with hard stuff.
When the TV surface is dirty, please use the wetting cotton cloth or soft cloth with
non-corrosive cleanser to clean it carefully. Don't use the acetone, toluene or alcohol to
clean the TV sets.
Be careful of the hydrosphere coagulation due to the temperature changing. The
coagulated hydrosphere will damage inner electronic components. When the coagulated
hydrosphere disappears, the TV screen may appear blur or spot.
Be sure to ask technicians to install the TV sets on the wall. The incorrect installations will
put the TV sets into the unsafe situation.
Don't let the children climb up the TV sets or play near it in order to avoid being spilled from
the TV sets or the TV sets damaged the children when falling down.
Don't hit the panel with hard objects ( Such as high-speed football or other objects) to
prevent the panel from damages.
Don't cover the TV sets with quilts or other objects when it is working. Keep the heats
dissipate and keep away from the fire.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
STANDARD INSTALLATION
The TV can be installed in various ways such as on a wall, or on a desktop etc.
10inches
10inches
10inches
10inches
10inches
The TV is designed to be mounted horizontally.
Ensure that you connect the earth ground wire to prevent possible electric shock.
if grounding methods are not possible, have a qualified electrician install a
separate circuit breaker.
Power
Supply
Short-Circuit
Breaker
Do not try to ground the unit by connceting it to telephone wires, lightening rods
or gas pipes.
a. Desktop Pedestal Installation
This is the default installation way of the TV.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDARD INSTALLATION
b. Wall Mount: Horizontal installation
(1) Secure the wall brackets with the bolts(not provided as parts of the product, must
purchase separately) on the wall.Match the height of the bracket that is mounted on
the wall. The wall bracket is of nomal dimension. Please see the position of the wall
brackets bolts as follow picture. The actual dimension of the wall brackts bolt should
according to the products.
The wall brackets bolt position
75mm
Four Mounting
Holes
Size:M4 Screws
(2) Remove the table stand of the TV when install the TV on a wall as follow:
(3) For proper ventilation, allow a clearance of 10” on each side from the wall.
10inches
10inches
10inches
10inches
10inches
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES OF WALL INSTALLATION
(1) Keep the TV stand for may be future use.
(2) Don’t set the TV set on shelves, carpets, beds, or closets.
(3) Don’t cover the TV with curtain or paper.
(4) Leave ventilation space to avoid the following:
No good for ventilation
No good for ventilation
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front/Back panel diagram
DVD
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front/Back panel diagram
15
14
9
16
INPUT
S-VIDEO
R
R
1
L
OUTPUT
1
VIDEO
VIDEO
1
R
P
2
L
P
2
VIDEO2
Y
4A
r
b
HDMI
L
(3.5mm)
YPbPr:Color difference
components input and relevant
video input
ANT 75 ohm: Connect the antenna to
the antenna input.
HDMI Input: Digital signal input from
HDMI video connector
S-VIDEO: Color and brightness
difference components input.
14/15. VIDEO/R/L1/2: external AV
signal input and relevant right/left
sound channel.
AV Output
VGA/AUDIO: VGA audio input.
16. POWER(DC IN) Connect to Mains
Adapter
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
1 POWER : Sets your TV to power on or standby mode.
POWER
MUTE
8
4
2
1
5
1
2 MUTE : Press to mute the sound. Press again or press
VOL+ to unmute.
9
3
D
1
5
9
2
6
0
3
7
4
8
3 0--9 Press 0~9 to select a TV channel directly while watching
TV. The channel will change after 2 seconds.Applicable for
entering page number in teletext mode and so on.
5B
5F
57
53
47
43
7 4B
4 4F
4
:
Return to the previously viewed program.
11 A
15 C
5 CH +/- : Press to scan through or to select a channel.
2
14
P.MODE S.MODE SLEEP
MTS
6 V +/-: Press to increase / decrease the sound level.
6
16
10
+
CH
7 - /- -
Press this button to enter a program number for
1B 13
E
MENU
SOURCE
different digit. eg. -/ - - / ---
1F
13
7
8 DISPLAY : Press to display the source and channel's info.
-
VOL
+
VOL
5
17
ENTER
9
6
9
B
3
F
8
12
-
CH
EXIT
DISPLAY
10 SOURCE: Press to list the source items.
54
58
11 SLEEP: Select amount of time before TV turn itself
off automatically.
50
44
5C
OPEN/CLOSE
PLAY/PAUSE STOP
PROG
48
4C
D.ENTER
40
55
12 EXIT: Exits from the menu or sub-menu and menus and adjust
the system settings to your preference.
59
5D
41
45
51
SETUP
PREV
ZOOM
REV
DISP
FWD
13 MENU : Allows you to navigate the on-screen menus.
49
4D
14 P.MODE:： Press to cycle through the different picture settings
NEXT
4A
4E
46
42
15 MTS:： Press to select the MTS mode.(for example,Nicam ,
BTSC,MONO,STEREO .eg )
AUDIO SUBTITLE ANGLE MENU/PBC
5A
5E
56
52
16 S.MODE: Press to cycle through the different sound settings.
GOTO
A-B
REPEAT
TITLE
CUSTOM CODE:007F
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Controller
17/19/20/21/31.
ENTER
When the DVD menu or system menu display on the
TV screen and wait for selection, press these buttons
to select an item in a menu. Moves an enlarged picture
up/down/left/right.
POWER
MUTE
Press this button to confirm a selection.
1
5
9
2
6
0
3
7
4
8
18
22
23
24
25
26
27
P.MODE S.MODE SLEEP
MTS
+
CH
MENU
SOURCE
-
VOL
+
VOL
ENTER
28
29
30
-
CH
EXIT
DISPLAY
17
29
30
32
18
OPEN/CLOSE
PLAY/PAUSE STOP
PROG
19
31
32
33
ZOOM
33
D.ENTER
20
21
In DVD source this buttons to adjust DVD picture size
22
23
24
25
26
27
28
34
35
36
37
38
39
40
Press display button to show the information of the
DVD player.
34
SETUP
PREV
ZOOM
REV
DISP
FWD
35
NEXT
36
37
AUDIO SUBTITLE ANGLE MENU/PBC
MENU/PBC
38
GOTO
A-B
REPEAT
TITLE
39
40
Battery Installation:
Remove the battery compartment lid on the rear of the remote control by sliding the lid down, then
off. Put two AAA batteries inside the battery compartment with their + and - ends aligned as
indicated. Do not mix old and new batteries or different types of batteries Replace the battery
compartment lid. Slide the lid until you hear it click into place.
Using the Remote Control:
Unless stated otherwise, the remote control can operate all the features of the TV.
Always point the remote control directly at the remote sensor in the front of the TV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
side
DC 12V
4A
Adaptor
3
indicator
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
7
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Menu to exit
sub-menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
R
G
Empty
Empty
PG
NONE
PG13
NC17
X
C
G
C8+
18+
14+
PG
G
8 ANS +
16 ANS +
13 ANS +
18 ANS +
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TITLE BUTTON
Overview of Remote Control
DVD Mode
Press TITLE button, there will have an
screen indication "TITLE"
Press the direction or numeric buttons to select
your favourite title. Will play from the first chapter
of the selected title.(for DVD disc only)
D.ENTER
D.ENTER: Validation key. (bottom section of
D.ENTER button for DVD function only)
,
When in DVD mode use the arrows in the
ARROW BUTTONS ( / / / ):Use to move
cursor up/down/left/right. (direction buttons of
bottom section for DVD function only)
bottom section of the remote to operate the
menus etc.
SUBTITLE: This function may enable you to
select multi subtitle languages (as many as 32
kinds only for the discs with multi subtitles
encoded). Press the SUBTITLE button to get
desired display.
EJECT BUTTON( )
Press the OPEN/CLOSE button whenthe power is
on the disc will eject. Put the disc in the slot slightly,
with the data side facing towards you. Press OPEN
/CLOSE button again the disc is pulled in
automatically, and the unit starts playing
automatically (Without auto play function for JPEG
discs).
DISP: Press DISP buttom to show the the
information of the DVD player.
GO TO BUTTON
MENU/PBC BUTTON
Press this button to go to desired position . The
player provides 3 search mode.
Press MENU/PBC button and the screen will
display "Root Menu" select item according to your
preference. (This button is valid to DVD disc
possessing multilayer Menu). PBC button lets you
play Video CDs,interactiv-ely. If PBC is on, you
can use the number buttons to select tracks in
the menu. If PBC is off, you can select the tracks
directly.
TITLE XX/XX CHAPTER [ XX]X/
[DVD only]
[DVD only]
DISC GO TO
CHAPTER XX/XX TIME
AUDIO BUTTON
When play DVD, by pressing this button, you can
change the audio language from the one selected
at the initial settings to a different language,
available.
[DVD only]
CD
VCD
[
] [
]
TRACK GO TO
XX
Select Track
:
REPEAT BUTTON
CD
VCD
[
]
[
]
On the remote control, the bottom section
ARROW BUTTONS ( / / / ):Up and down
buttons of the OSD menu, to change the OSD
menu items; Left and right buttons of the OSD
menu, to select the OSD menu items. (only for
DVD function)
Press the REPEAT button one time, it repeats the
chapter. Press it again and it repeats all chapters
of the disc. Press REPEAT button one more time
and the repeat function cancels.
A-B REPEAT BUTTON
When the above items are showed on LCD
screen, you can input numbers to locate desired
sector.
Press the A-B button once to set point A Press .
the A-B button a second time to set point B. After
setting the program repeat playing from A to B.
Pressing the A-B button a third time will cancel
the repeat.
The number you input is invalid if it is beyond the
track's capacity.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Use number key enter the title No. and the cursor
will move to the chapter, enter the chapter No. by
press number key again
PLAY AND PAUSE BUTTON(
)
Press this button to start playback. Press this
button again to pause playback.
Select “Start” and press D.ENTER to play
programmed chapter
STOP BUTTON( )
Select “Next” and press D.ENTER to turn to
next page
Press STOP button once to stop. Press button
to resume from where you stopped.
Select “ Exit” and press D.ENTER to quit program
Press STOP button Twice to stop. Press button
to start from beginning. In order to protect the disc,
press STOP button then press OPEN/CLOSE
button to take the disc out. When the disc is
ejected, hold the disc edge to prevent scratches.
2. In CD,VCD and SVCD play mode, press PROG
to enter programming and the TV will display as
follows:
When not using the DVD function (in standby
mode or using others modes for a long time),
please take out the disc to protect the DVD loader
and the disc.
S.Q No.
Track No.
PREV/NEXT BUTTON(
/
)
When playing a DVD disc, press PREV to play the
previous chapter. when playing a SVCD, VCD,
CD disc, press PREV to play the previous track.
Use number key enter the track No. and
Select “Star” and press to play programmed
chapter to play programmed track
Select “Next” and press D.ENTER to turn to next
page
When playing a DVD disc, press NEXT to play,
the next chapter. when playing a SVCD, CD disc,
press NEXT to PLAY the next track.
REV/FWD BUTTON(
/
)
Select “ Exit” and press D.ENTER to quit program
To Use Fast Forward or Fast Reverse:
For VCD、SVCD、DVD discs, it can program 20
items mostly, when finish the first 10 programs
please move the cursor to “Next” and press
D.ENTER to turn to next page, please go ahead
to program. If you want to change the
1. When playing a DVD, press FWD buuton to fast
forward through the disc. Press REV button to
fast reverse through the disc.
2. Press PLAY button to resume normal playback.
programmed items please move the cursor to
that item and use direction key to move to the
location where you want to amend, enter the
correct track No. Title No. or Chapter No.
◆The track No., Title No. or Chapter No. might
be different as per different discs.
SETUP BUTTON
Press this button to get the setup menu . you can
select the setting as you like .
PROGRAM
◆Please enter valid track No., Title No. or
Chapter No. when programming.
1. In DVD Mode, press PROG to enter
programming and the TV will display as follows:
ZOOM
Press ZOOM to view different kindly of zoomed
pictures.
S.Q No.
Title No.
Each time the when press ZOOM, it can be
viewed 2X、3X and 4X zoomed pictures.
You can move,enjoy the parts of the picture
when the picture zoom in.
Chapter
No.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ANGLE OF CHOICE
Press “ANGLE” then you can enjoy the picture
with different angle when you play multi-angle
picture. Multi-angle means that take a photo
from different scene. as follows:
For example: the DVD discs have three
different angles, Press “ANGLE”,TV will
display as follows:
ANGLE
1/3
2/3
3/3
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu
Interface Function
21
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Care
Care of Disc
Video disc contains high-density compressed data that needs proper handling.
1. Hold the disc with fingers by outer edge and/or the center spindle hole. Do not touch the discs surface.
2.Do not bend or press the disc.
3.Do not expose the disc to direct sunlight or heating sources, Stere discs in cabinet vertically, and in dry
condition.
Prevent exposure to:
Direct sunlight
Heat or exhaust from a heating device
Extreme humidity
Clean the disc surface with a soft, dry cleaning cloth, Wipe the disc surface gently and radically from
center toward the outer edge.
Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning. Such cleaning
fluids will permanently damage the disc surface.
WARNING! DO NOT INSERT OR
PLAY 8CM DISC, THEY WILL GET
STUCK.
Region Code 1
As it is usual for DVD movies to be released at
different times in different regions of the world, all
players have region codes and discs can have
an optional region code. If you load a disc of a
different region code into your player you will see
the region code notice on the screen. The disc will
not playback and should be unloaded.
The region code for this player is 1(refer to the
symbols below ).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
HELP
Check the AC cord of TV is plus in or not. If still no power, please
Pull out the plug and replug in after60 seconds. And open the TV
again.
No Power
To cause double image or phantom if there has high building or high
mountain round -TV. You can adjust image effect by manually
operation: consult instruction of vernier regulation or change the direction
of external antenna.
Signal receive
not properly
If you use the indoor antenna . under certain circumstance, receive will be
more difficult .So you can change the direction of the antenna to adjust the
image effect . If can't change image receiving effect either , you have to
use external antenna.
Check the antenna at the back of TV is connected properly or not.
Try to select other channels and check whether the TV problem itself or not.
No picture
Video is ok ,but
without audio
Increase the volume.
Check the TV is in mute mode or not , and please press the mute
button to make sound resume.
Audio is ok, but
color error or no
picture.
Increase contrast and brightness.
snow statics
picture and noise
Check the antenna at the back of TV is connected or not .
Maybe has electrical appliance interfere, such as hair drier, vacuum
cleaner and so on, please turn off these kinds of electrical appliance.
Level broken line
Perhaps the location for the antenna is not good.Use the tall beamed
antenna can be improved quality of the display image.
Operate the remote direct to the remote sensor on the TV.If still no
response for the TV, please check if the plastic bag on the remote take or
not. And checkif the location for the battery is correct.Change the new
battery.
Dual-Image or
"simulacrum"
The TV no
response with
the Remote.
The TV will shift to the STAND BY if no response from the remote in the
few minutes.
Please check if the display cable connect to the VGA correcte .
Please check if there has the bend on the display cable.
NO Video In.
(PC Mode)
Vertical twinkling
(PC Mode)
Enter the main menu, Use the clock regulator for the Video display noise
to eliminate the vertical line.
horizontal ripping
(PC Mode)
Adjust the Audio sound horizontal in the main menu to clear the horizontal
ripping line.
The screen is too
bright or too dark
(PC Mode)
Adjust the contrast ratio or brightness in the main menu.
Check the computer setting in the state of compatible display resolution
Please use good quality connecting cable.
PC Function no
response
Ripping line in
RCA connecting
Unplug the power cable and wait for 30 seconds, then connect.If there is
some problem with our TV, do not repair it by yourself, please contact with
the customer service center.
Problem still
exist
Note: There will be complete picture and the brightness will come down if the TV
is in the static picture for too long time, So please do not keep the TV in a state of same
Menu or same picture that has much difference in brightness and contrast ratio for too
long time.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Screen Size
TV system
19”
NTSC M PAL M/N
Video system
NTSC/PAL
Preset Channels
AIR：2-69 CATV：1-125
IN:VGA, A/VX2, S-VIDEO, HDMI, Y PBPR, PC Audio input
Input/Output
Ω
ANT 75
.
OUT: EARPHONE, A/V. Built-in DVD player.
Audio output power
3Wx2
DC 12V
4A
Power requirement
Max. power consumption
<48W
User's manual
AC adaptor
Remote controller
2 x AAA Batteries
Power cord
Accessories
Supporting DVD Format
This product can play the following DVD formats disc.
Disc Type
DVD
Disc Size
(Diameter)
Recorded Time
Recorded Content
Remarks
12cm
Single side:120mins.
Approx
DVD format:
Compressed digital
audio and video
Double side:240mins.
Approx
Super
VCD
12cm
12cm
45mins. Approx
MPEG2 Compressed
digital audio and video
Include SVCD
VCD
74mins. Approx
MPEG1
Compressed digital
audio and video
Include:
VCD2.0/ VCD1.1
VCD1.0/ DVCD
CD
12cm
12cm
12cm
74mins. Approx
74mins. Approx
600mins. Approx
CD-DA: Digital audio
HD-DA: Digital audio
Digital audio
HD-CD
MP3/JPEG
NOTE: Also supports DVD-R, CD-R,
CD-RW playback.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
|