To prevent fire or shock hazard do not expose the insides
of the unit to rain or moisture.
WARNING
A. PRECAUTIONS
B. FEATURES
This symbol alerts the user to the presence of important operating and
maintenance issues according to the manual.
THIS CCTV COLOR CCD CAMERA Introduces advanced CCD and digital
technology, and offers customers a high quality and high resolution picture.
a
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service
person for servicing.
SA 1966
This symbol alerts the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock .
b
c
Handle the camera with care.
Do not abuse the camera. Avoid hitting, shaking, etc.
The camera could be damaged by improper handling or storage.
Do not use strong or abrasive detergents when cleaning the
camera body.
The shell uses high-quality aluminum material
MODEL: QSDS1316D
The surface uses a high preservative adhesive
SA 1965
All seams are air tight (Suitable for outdoors and wet weather)
Use a dry cloth to clean the camera when dirty .
In case the dirt is hard to remove, use a mild detergent and wipe
gently.
CAUTION:
IR Waterproof Digital Color CCD
Camera
CAUTION:
To prevent electric shocks and
risk of fire hazards, only use the power
supply specifled for unit.
Has a
600TVL
high-resolution 1/3" CCD image sensor with image resolution of
RISK OF ELECTRIC SHOCK
DO NOT OPEN
d
e
Do not use the camera beyond the prescribed voltage range.
Ensure the input power source voltage is conforms to the local
city voltage. Higher voltage could fuse the power supply, Lower
voltage could cause abnormal performance.
TO REDUCE THERISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALFIED SERVICE
CAUTION:
The high performance digital-processing chip greatly improves the signal-to-
noise ratio and distortion
PERSONINEL
Do not aim strong light directly into the camera, it will prevent
the camera from producting effective video.
Automatic white balance function enables the camera to produce correct and
nature colors in any light conditions, indoor or outdoor, by automatically
adjusting the white balance point.
Warning- This equipment has been tested and found to comply with the limits for a
Class A digital device.These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates,uses,and can
radiate radio frequency energy and, if not installed and used in
The illumination distance referred to in this manual is indoor night view
distance. The infrared transmission will be affected if there is high humidity or
smoke in the air. Naturally the viewable distance will be shortened and the
night view effection will be reduced when the objects are lawn, trees or
anything without reflecting ability.
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the users' authority to operate the equipment.
Caution
CCTV SYSTEM
C. CONNECTION
D. SPECIFICATIONS
E. DIMENSIONS
a
Onemonitor system with one camera
AC ADAPTER
Video monitor
Image Sensor
COLOR 1/3" SONY CCD
Effective Pixels
NTSC:811(H) 508(V) PAL:795(H) 596(H)
CAMERA
Horizontal Resolution
600TVL
Sync System
Internal
Scanning system
Interlace 2:1
NTSC: 1/60s~1/100000s
ON/OFF
Electronic Shutter
White Balance
Gamma
b
Onemonitor system with two or more cameras
0.45
Video monitor
S/N Ratio
≥52dB
AC ADAPTER
CAMERA
Video Output
1.0Vp-p 75Ω BNC
0Lux(When IR LEDs on)
IP66
Usable Illumination
Waterproof level
IR LEDs Wavelength
850nM
IR LEDs Distance
24m (80ft)
IR LEDs Amount
IR LEDs Auto ON/OFF
AGC
φ8 LED, 36pcs
Day/Night
On/Off
BLC
On/Off
Lens
Fixed 16mm
DC12V 1000mA
Power Supply
Power Consumption
Operating Temp
DVR
<5.5W(When IR LEDs on)
-10℃ +50℃ (14 F to 122 F) RH 95% Max
Weight
26.2 oz (742g)
Download from Www.Somanuals.com. All Manuals Search And Download.
|