Proxima
Desktop Projector 5500
User’s Guide
Final 06/21/96
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t e n t s
Ch a p t e r 1
Your Proxim a Desktop Projector 5500
What’s in the Box? ............................................................... 1-2
Quick Start ........................................................................... 1-3
Connector Panel .................................................................. 1-5
Control Panel ....................................................................... 1-6
Options and Accessories ..................................................... 1-6
Ch a p t e r 2
Setting Up the Desktop Projector 5500
Your DP5500 ....................................................................... 2-1
Getting Started ..................................................................... 2-2
Connector Panel .................................................................. 2-5
Connecting Power to the Projector .................................... 2-6
Connecting Computer Video .............................................. 2-6
Connecting Computer Audio ........................................... 2-10
Connecting Composite Video .......................................... 2-11
Connecting an S-Video Source ......................................... 2-11
Connecting Non-Computer Audio ...................................2-12
Ch a p t e r 3
Using the Desktop Projector 5500
Turning on the Projector and Lamp ................................... 3-1
Focusing and Zooming the Image ...................................... 3-2
Turning off the Projector ..................................................... 3-2
Control Panel Keys .............................................................. 3-3
Control Panel Indicators ..................................................... 3-4
Using the Remote Control .................................................. 3-6
Using the Joystick ................................................................3-8
Operating the Projector....................................................... 3-8
The Graphical User Interface .............................................. 3-9
Using the Main Menu ....................................................... 3-10
Setup Menu ........................................................................ 3-11
Input Menu ........................................................................3-12
Image Menu .......................................................................3-13
Option Menu .....................................................................3-14
Quick Menus..................................................................... 3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a p t e r 4
Maintenance
Cleaning the Lens ................................................................4-1
Replacing the Lamp ............................................................. 4-2
Cleaning the Air Filter ......................................................... 4-4
Changing the Remote Control’s Batteries .......................... 4-5
Ch a p t e r 5
Troubleshooting
Where to get Help ................................................................5-1
Returning your DP5500 for Repair ..................................... 5-5
Ordering Parts...................................................................... 5-5
Ap p e n d ix A
Specifications
DP5500 Specifications ....................................................... A-1
Ap p e n d ix B
Replacem ent Parts and Accessories
Replacement Parts ...............................................................B-1
Optional Accessories ...........................................................B-1
In d e x
Download from Www.Somanuals.com. All Manuals Search And Download.
C h a p t e r 1
Your Proxima Desktop Projector 5500
The Proxima® Desktop Projector™ family consists of portable, color data and
video Desktop Projection™ products that make sharing data and presenting
information as easy as connecting your computer to your monitor.
800
600
400
200
0
APR
MA
Y
JUN
JUL
800
600
400
200
T
E
M
P
L
A
M
P
/
N
S
T
A
N
D
B
Y
O
N
0
I
M
U
T
E
APR
Z
O
O
M
MA
Y
JUN
JUL
Z
O
O
M
M
E
N
U
R
E
S
E
T
Figure 1-1 The Proxim a DP5500 in use
This manual covers the Desktop Projector 5500, which provides images of
unrivaled brightness, clarity, and color accuracy.
Your Proxim a Desktop Projector 5500 1 -1
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT’S IN THE BOX?
After you’ve opened the box and removed the DP5500 and accessory packs,
make sure you have all of the items shown in Figure 1-2.
CAUTION! The DP5500 should be treated like any other precision optical
instrum ent. Handle it carefully.
R
S
E
M
N
U
F
C
Z
O
M
M
T
S
OP
CL
CY
I
P
U
T
M
P
S
A
D
Y
/
N
L
M
P
O
AUDIO
0UT
AUDIO
IN
RGB OUT
CONTROL
RGB IN
RIGHT
ESET
STANDB
R
Y
MENU
+
ZOOM
–
FOCUS
TIMER
BLANK
VOL
SEARCH
MUTE
VIDEO 1/2
RGB 1/2
INPUT
Power Cords
Rem ote Control
Proxim a
Desktop Projector
AV Cable
VGA Video Cable
Serial Cable
S-Video Cable
Mac – VGA
Mini-stereo to Mini-stereo Cable
Cable Adapter
Also included but not shown:
• (2) AAA Alkaline Batteries
• User's Guide
• Product Registration Card
Figure 1-2 Item s included with the DP5500
Your projector also includes power cords for Europe and Great Britain.
1 -2 Chapter One
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK S TART
Place the DP5500 on a solid flat surface at a right angle (perpendicular) to
the projection screen, parallel to the floor. Follow the appropriate section
below for the type of system that you have. These steps are described in
detail in Chapter 2.
NOTE: The DP5500 has two sets of com puter video and audio inputs. The
following exam ples describe how to use INPUT 1.
De s k t o p P Cs
1 Unplug the monitor cable from the computer.
2 Plug one end of the supplied VGA cable into the RGB 1 IN port on the
projector. Plug the other end into the computer’s Monitor Out port.
3 Connect your audio source to the AUDIO 1 IN port on the projector
using the AV cable.
4 You can project with or without a PC monitor. To use the monitor, plug
the monitor cable into the RGB OUT port on the projector.
5 Turn the projector on and press the STANDBY/ON key.
NOTE: An external m onitor is not needed to use the DP5500.
De s k t o p Ma c in t o s h Co m p u t e rs
1 Unplug the monitor cable from the computer.
2 Plug one end of the supplied VGA video cable into the RGB IN 1 port on
the projector. Attach the VGA end of the Mac - VGA cable adapter to the
other end of the VGA video cable.
3 Plug the Mac end of the Mac - VGA cable adapter into your computer’s
Video port.
4 Connect your audio source to the AUDIO 1 IN port on the projector
using the AV cable.
5 To project and view the monitor at the same time, plug your monitor
cable into the RGB OUT port of the projector.
NOTE: The DP5500 only supports Multi-Sync m onitors for Macintosh
com puters. Other m onitors cannot be used.
Your Proxim a Desktop Projector 5500 1 -3
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Turn the projector on and press the STANDBY/ON key.
NOTE: If you turn the projector off while the com puter is running, the
external m onitor will go blank. This is norm al. J ust turn the projector back
on, and the m onitor display will return.
No t e b o o k s
NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA
cable adapter to the com puter’s Video Out port (or video adapter cable).
1 Plug the COMPUTER end of the VGA Video cable into the notebook’s
VGA Out port or into the Mac - VGA cable adapter (Macintosh only).
2 Plug one end of the VGA Video cable into the RGB IN 1 port on the
projector.
3 Connect your audio source to the AUDIO 1 IN port on the projector.
4 Turn on the projector and press the STANDBY/ON key.
S p e c ia l Co n fig u ra t io n s
If your computer has an internal monitor but no external video capability
(such as the Macintosh Performa 575, PowerMac 5200, and certain
PowerBooks), you need a video adapter card in order to attach the DP5500.
Setup for a third-party adapter is identical to the procedures outlined in the
Quick Start section above. Contact your dealer, Proxima Customer Service, or
a third-party supplier for more information about an appropriate video
adapter.
1 -4 Chapter One
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTOR P ANEL
All connections between the DP5500 and your computer or video source are
made on the side connector panel.
2
3
4
CYCLOPS S-VIDEO
VIDEO
L
AUDIO
R
1
1
2
5
AUDIO
IN
AUDIO
OUT
11
10
1
6
7
RGB OUT
2
RGB IN
CONTROL
9
8
Figure 1-3 The Connector Panel
CONNECTOR
DES CRIP TION
1
CYCLOPS Port
Connects your com puter to the Cyclops Interactive
Pointer System .
2
3
S-VIDEO 1 & 2
VIDEO 1 & 2
Connects to an S-Video source.
Connects to video output from an NTSC, PAL, or
SECAM source.
4
L-AUDIO-R 1 & 2
Connects to stereo/m ono audio output from an
NTSC, PAL, or SECAM source.
5
AUDIO OUT
Provides audio output to an external stereo system .
Provides com puter output to a separate m onitor.
Connects to a serial cable for com puter control.
Turns power on and off.
6
RGB OUT
7
CONTROL
8
POWER SWITCH
POWER RECEPTACLE
RGB IN 1 & 2
AUDIO IN 1 & 2
9
For AC power cord connection.
10
11
Connects com puter video to the projector.
Connects to stereo/m ono audio output from a
com puter.
Your Proxim a Desktop Projector 5500 1 -5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL P ANEL
Use the DP5500’s control panel keys to turn the projector on or off, adjust
the projected image, and to display and hide the menus. Power, warning,
and alert lights give you important information about how your projector is
working.
KEY
FUNCTION
ON
STANDBY/ON
INPUT
Turns the lam p on or off.
Switches the video inputs.
Turns the Audio on or off.
Zoom s in and out.
LAMP
STANDBY
/ON
TEMP
MUTE
INPUT
MUTE
ZOOM +/-
FOCUS +/-
MENU
Adjusts the focus.
Controls the m enu.
–
–
ZOOM
RESET
Resets the im age to the factory defaults.
+
INDICATOR FUNCTION
FOCUS
ON
Flashes green during start-up.
+
Glows green if AC input and projector power
supplies are functioning. Glows red if they are not,
or if the air filter door is rem oved.
MENU
TEMP
LAMP
Glows red to warn of an over-tem perature
RESET
condition. Flashes red if the fan is not working.
Glows red if the projection lam p burns out.
Figure 1-4 The DP5500 Control Panel
OP TIONS AND ACCES S ORIES
Th e Cyc lo p s In t e ra c t ive P o in t e r s ys t e m
The Proxima Cyclops® interactive pointer system uses a built-in camera to
function like a cordless mouse. With the Cyclops system, you can control
your computer's cursor on the projected image by moving the hand-held
wand or optional hand-held laser pointer.
1 -6 Chapter One
Download from Www.Somanuals.com. All Manuals Search And Download.
C h a p t e r 2
Setting Up the Desktop Projector 5500
YOUR DP 5 5 0 0
Before you begin, locate the main parts of the DP5500.
1
10
2
3
S
OP
CL
CY
O
N
AUDIO
0UT
9
8
AUDIO
IN
RGB OUT
CONTROL
RGB IN
RIGHT
RESET
STANDBY
4
MENU
+
ZOOM
–
FOCUS
TIMER
BLANK
VOL
5
11
SEARCH
MUTE
VIDEO 1/2
RGB 1/2
INPUT
6
7
Figure 2-1 The Proxim a DP5500 and Cyclops Rem ote Control
1. Control panel
7. Projection lens
8. Infrared lens
9. Internal speaker
10. Handle
2. Rear exhaust
3. Connector panel
4. AC power switch
5. Power cord receptacle
6. Bottom intake filter
11. Remote control
Setting Up the Desktop Projector 5500 2 -1
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING S TARTED
P o s it io n in g t h e P ro je c t o r
Place the projector on a solid, flat surface at a right angle (perpendicular) to
the projection screen and parallel to the floor. If you’re using a media cart,
make sure the wheels are locked to prevent it from moving.
T E M P L A M P
O N
R E S E T
M E N U
F O C U S
Z O O M
M U T E
I N P U T
/ O N
S T A N D B Y
Top View
Perpendicular to the
projection screen
8.8°
Side View
Parallel to the floor
Figure 2-2 Positioning the projector
2 -2 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
Tra n s p o rt in g a n d Mo vin g t h e P ro je c t o r
The projector has a recessed handle on one of the side panels. Always use
the handle to transport it. The projector has protective feet on the side
opposite the handle, as well as on the bottom.
Figure 2-3 Transporting the projector
If you are moving the projector a short distance, grasp it securely at the sides
by the lower parts of the housing to support the weight of the unit.
S
OP
CL
CY
O
N
OL
Figure 2-4 Moving the projector
Setting Up the Desktop Projector 5500 2 -3
Download from Www.Somanuals.com. All Manuals Search And Download.
P ro je c t o r Co o lin g a n d Airflo w
The air intake grill is on the bottom of the projector. The air exhaust grill is on
the rear panel.
CAUTION! Never operate the projector if these grills are clogged or
obstructed, or if the electric fans are not running.
R E S E T
M E N U
F O C U S
F O C U S
M U T E
I N P U T
T E M P
L A M P
/ O N
S T A N D B Y O N
Figure 2-5 Allow for proper air flow
2 -4 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTOR P ANEL
All connections between the projector and your computer or video source
are made on the side connector panel.
2
3
4
CYCLOPS S-VIDEO
VIDEO
L
AUDIO
R
1
1
2
5
AUDIO
IN
AUDIO
OUT
11
10
1
6
7
RGB OUT
2
RGB IN
CONTROL
9
8
Figure 2-6 The Connector Panel
CONNECTOR
DES CRIP TION
1
CYCLOPS Port
Connects your com puter to the Cyclops Interactive
Pointer System .
2
3
S-VIDEO 1 & 2
VIDEO 1 & 2
Connects to an S-Video source.
Connects to video output from an NTSC, PAL, or
SECAM source.
4
L-AUDIO-R 1 & 2
Connects to stereo/m ono audio output from an
NTSC, PAL, or SECAM source.
5
AUDIO OUT
Provides audio output to an external stereo system .
Provides com puter output to a separate m onitor.
Connects to a serial cable for com puter control.
Turns power on and off.
6
RGB OUT
7
CONTROL
8
POWER SWITCH
POWER RECEPTACLE
RGB IN 1 & 2
AUDIO IN 1 & 2
9
For AC power cord connection.
10
11
Connects com puter video to the projector.
Connects to stereo/m ono audio output from a
com puter.
Setting Up the Desktop Projector 5500 2 -5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING P OWER TO THE P ROJ ECTOR
The power cord receptacle and AC POWER switch are located below the
projector’s connector panel.
MONITOR OUT
2
RGB IN
CONTROL
Figure 2-7 Power receptacle and AC Power switch
1 Plug the appropriate power cord for your location into the power
receptacle on the side of the projector.
2 Connect the power cord to a properly-grounded wall outlet.
CONNECTING COMP UTER VIDEO
Co n n e c t in g a P C
Use the included VGA video cable to connect your PC to the projector.
If you want to use your monitor and DP5500 at the same time, use your
existing monitor cable to connect the projector to a separate monitor.
VGA Connector Cable
Figure 2-8 VGA Video cable
2 -6 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
CYCLOPS S-VIDEO
VIDEO
L
AUDIO
R
1
2
AUDIO
IN
AUDIO
OUT
1
MONOR OUT
CONTROL
2
RGB IN
VGA Cable
To Computer In
From
Monitor Out
Figure 2-9 VGA connections
1 Unplug the monitor cable from the computer.
2 Plug one end of the supplied VGA cable into the RGB IN 1 port on the
projector. Plug the other end of the VGA cable into the computer's Video
Out (VGA) port.
3 Connect your audio source to the AUDIO IN 1 port on the projector
(see page 2-10).
NOTE: If you are using a second com puter video or audio source, plug their
outputs into the RGB IN 2 and AUDIO IN 2 connectors.
4 If you want to use an external monitor, connect the monitor cable to the
RGB OUT port of the projector.
5 Turn the projector on and press the STANDBY/ON key.
NOTE: An external m onitor is not required to use the DP5500.
Setting Up the Desktop Projector 5500 2 -7
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e c t in g Ma c in t o s h Co m p u t e rs
Use the video adapter cable shown below to connect a Macintosh computer
to the DP5500.
From
Mac CPU
To VGA
Cable
Mac – VGA Cable Adapter
Figure 2-10 The Macintosh adapters
Use the cable adapter and supplied VGA video cable to connect the
projector to your Macintosh computer.
CYCLOPS S-VIDEO
VIDEO
L
AUDIO
R
1
2
Mac - VGA
Cable Adapter
AUDIO
IN
AUDIO
OUT
1
MONIOR OUT
CONTROL
VGA Cable
to
Com puter 1
In Port
2
RGB IN
Macintosh
Monitor Cable
VGA - Mac
Monitor Cable
To Monitor Out Port
Figure 2-11 Macintosh connections
1 Unplug the Macintosh monitor cable from the computer.
2 Plug one end of the supplied VGA video cable into the RGB IN 1 port on
the projector. Attach the VGA end of the Mac - VGA cable adapter to the
other end of the VGA video cable.
3 Plug the Mac end of the Mac - VGA cable adapter into the Macintosh
video port.
4 Connect the audio source to the projector's AUDIO IN 1 port
(see page 2-10).
NOTE: If you are using a second com puter video or audio source, plug their
outputs into the RGB IN 2 and AUDIO IN 2 connectors.
2 -8 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
Use your existing monitor cable to connect the projector to a separate
computer monitor, so you can use the projector and monitor at the same
time.
NOTE: The DP5500 only supports Multi-Sync m onitors for Macintosh
com puters. Other m onitors cannot be used.
5 Turn the projector on and press the STANDBY/ON key.
NOTE: An external m onitor is not required to use the DP5500.
Co n n e c t in g No t e b o o k Co m p u t e rs
Use the appropriate cable and adapter to connect your portable computer to
the projector.
1
Video
2
Output
Port
Com puter 1
In Port
AUDIO
IN
AUDIO
OUT
1
2
MONITOR OUT
CONTROL
RGB IN
MAC - VGA
Adapter
VGA Cable
Figure 2-12 Laptop connections
NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA
cable adapter to the com puter’s VIDEO OUTPUT port (or video adapter cable).
1 Plug the COMPUTER end of the VGA cable into the computer’s VGA or
Video Out port or into the Mac - VGA cable adapter (Macintosh only).
2 Plug one end of the supplied VGA cable into the RGB IN 1 port on the
projector.
3 Connect your audio source to the AUDIO IN 1 port on the projector.
4 Turn the projector on and press the STANDBY/ON key.
NOTE: If your projector won’t project an im age at the sam e tim e as your laptop
m onitor, refer to your laptop docum entation for inform ation on switching
between the internal screen and the video port.
Setting Up the Desktop Projector 5500 2 -9
Download from Www.Somanuals.com. All Manuals Search And Download.
S p e c ia l Co n fig u ra t io n s
If your computer has an internal monitor but no external video capability
(Macintosh Performa 575, PowerMac 5200, and certain PowerBooks), you
need a separate video adapter card in order to attach the DP5500.
Setup for a third-party adapter is identical to the procedures outlined in the
Quick Start section in Chapter 1. Contact your dealer, Proxima Customer
Service, or a third-party supplier for more information about an appropriate
video adapter.
CONNECTING COMP UTER AUDIO
The AUDIO IN 1 and 2 ports allow audio input from two separate
computers or microphones.
AUDIO
IN
AUDIO
OUT
1
MONITOR OUT
Figure 2-13 Com puter 1 & 2 Audio ports
1 Insert one mini jack end of the Computer Audio cable into the AUDIO
OUT port of a Macintosh or the sound card of a PC.
2 Insert the mini-jack at the other end of the AV cable into the projector’s
AUDIO 1 or 2 ports.
NOTE: Although two COMPUTER AUDIO sources and two other AUDIO
sources m ay be connected sim ultaneously, only one can be active.
If com puter video is selected, COMPUTER AUDIO is active. If NTSC, PAL,
SECAM, or S-VHS video are being viewed, the L-AUDIO-R are active.
2 -1 0 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING COMP OS ITE VIDEO
You can display composite video (NTSC, PAL or SECAM) on the DP5500.
CYCLOPS S-VIDEO
VIDEO
AUDIO
L
R
1
2
Figure 2-14 Video 1 & 2 ports
Use the supplied AV cable (see page 1-2) to connect an NTSC, PAL, or
SECAM source to your projector.
1 Find the RCA connector on your video source marked Video Out
(or something similar). This connector is usually yellow. Insert one of the
AV cable’s yellow connectors into the Video Out jack on the video source.
2 Insert the other yellow connector into the projector’s VIDEO 1 port.
CONNECTING AN S -VIDEO S OURCE
To connect an S-Video source, use the supplied S-Video cable (see page 1-2)
instead of an RCA cable connection. The S-Video cable has identical, round,
4-pin mini-DIN connectors on both ends.
CYCLOPS S-VIDEO
VIDEO
AUDIO
L
R
1
2
Figure 2-15 The S-VHS port
To connect an S-Video source:
1 Insert one end of the S-Video cable into the mini-DIN Video Out port on
the video source.
2 Insert the other end of the S-Video cable into the projector’s S-VIDEO
port.
Setting Up the Desktop Projector 5500 2 -1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Use the red and white AV Cable connectors to connect audio from the
S-Video source to the projector. See connecting Non-Computer Audio,
below.
CONNECTING NON-COMP UTER AUDIO
The AUDIO ports allow you to connect stereo or monaural audio from a
composite video source.
L
AUDIO
R
Figure 2-16 Audio Input ports
For stereo audio, use the supplied AV cable.
1 Insert the red (right) and white (left) ends of the cable into the Audio Out
ports of a composite video’s audio source.
2 Connect the other end of each cable to the projector’s AUDIO IN ports.
NOTE: Although two COMPUTER AUDIO sources and two other AUDIO
sources m ay be connected sim ultaneously, only one can be active. If
com puter video is selected, COMPUTER AUDIO is active. If NTSC, PAL,
SECAM, or S-VHS video are being viewed, AUDIO is active.
If your audio source is monaural, connect it to the left AUDIO port.
2 -1 2 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e c t in g t h e P C t o t h e P ro je c t o r Th ro u g h t h e
CONTROL P o rt
You can connect the projector to a computer through the CONTROL port.
You can then use the joystick on your remote control as the computer's
system mouse (see page 3-8). Before you begin, make sure that the projector
and computer power is on and that the cables are securely connected.
NOTE: This CONTROL feature is only available for PCs.
1
MONITOR OUT
2
CONTROL
RGB IN
Figure 2-17 The Control port
Co n n e c t in g t h e Cyc lo p s In t e ra c t ive P o in t e r S ys t e m
Use the CYCLOPS port to connect the projector and optional Cyclops
interactive pointer system to the computer. You can use the Cyclops system
to control your computer's on-screen mouse cursor.
CYCLOPS S-VIDEO
VIDEO
AUDIO
L
R
1
2
Figure 2-18 The Cyclops port
The optional Cyclops interactive pointer system is shipped with its own
Installation and User’s Guides. The Cyclops kit also includes extra cables to
connect the projector and the computer.
1 Connect one end of the appropriate serial cable to the projector’s
CYCLOPS port.
2 Connect the other end of the cable to the computer:
• On a PC, connect the computer end to a Serial port.
• On a Macintosh, connect the computer end to an ADB connector.
Setting Up the Desktop Projector 5500 2 -1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
P ro je c t o r Au d io Ou t
The projector contains an internal stereo system consisting of an amplifier
and one speaker. Although this system provides high-quality audio output, a
multimedia presentation may require independently powered stereo
speakers or an external sound system.
NOTE: Use the MUTE key to turn the projector’s internal and any connected
external speakers on or off.
AUDIO
OUT
Figure 2-19 The Audio Out port
To connect your projector to an external stereo system:
1 Insert one end of a Computer Audio cable into the projector’s AUDIO
OUT port.
2 Insert the plug at the other end into the external amplifier or powered
speaker system’s Audio In port.
2 -1 4 Chapter Two
Download from Www.Somanuals.com. All Manuals Search And Download.
C h a p t e r 3
Using the Desktop Projector 5500
TURNING ON THE P ROJ ECTOR AND LAMP
Power the DP5500 up before the computer. This allows the computer to
sense the projector during its start-up sequence.
Move the AC POWER switch to the ON position. The ON indicator on the
projector control panel glows orange.
The lamp is off when you first turn on the projector. Press the STANDBY/ON
key on the operator panel for one second to turn the lamp on. The ON
indicator blinks green for a few seconds while the lamp warms up, and then
turns to a steady green color. Next, turn on your computer.
CAUTION! Never operate the projector if the air intake or exhaust grills
are clogged or obstructed, or if the electric fans are not running.
ON
LAMP
STANDBY
/ON
TEMP
INPUT
Figure 3-1 Projector STANDBY/ON key
Using the Desktop Projector 5500 3 -1
Download from Www.Somanuals.com. All Manuals Search And Download.
FOCUS ING AND ZOOMING THE IMAGE
You can use the title screen that appears when you first start the projector to
make your focus and image size adjustments.
1 Press the ZOOM +/- key on the Control Panel or Remote Control to make
the image larger (+) or smaller (-).
NOTE: If you have a Cyclops interactive pointer system installed and you
change the im age size, you will have to recalibrate the Cyclops cam era.
2 Adjust the focus using the FOCUS +/- buttons on the Control Panel or
Remote Control.
Im a g e S ize
The size of the projected image will change as you move the projector closer
to the screen or adjust the zoom lens. The following table indicates the
minimum and maximum distance from the projector to the screen for most
standard size screens.
DIS TANCE FROM P ROJ ECTOR TO S CREEN
S CREEN S IZE
40 in.
MINIMUM
53.9 in.
82.3 in.
111 in.
MAXIMUM
87.8 in.
134 in.
60 in.
80 in.
179 in.
100 in.
139 in.
224 in.
120 in.
168 in.
270 in.
150 in.
210 in.
338 in.
200 in.
281 in.
452 in.
TURNING OFF THE P ROJ ECTOR
1 Press and hold the STANDBY/ON key on the Control Panel for one
second to turn the lamp off. When using the remote control, press and
hold the STANDBY/ON key for two seconds.
2 The fan will stop about one minute later and the ON indicator will glow.
Turn the AC POWER switch off.
3 -2 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL P ANEL KEYS
Use the DP5500’s control panel keys to turn the projector on or off, adjust
the projected image, and to display and hide the menus. Power, warning,
and alert lights give you important information about how your projector is
working.
KEY
FUNCTION
ON
LAMP
STANDBY/ON Turns the lam p on or off.
STANDBY
/ON
TEMP
INPUT
MUTE
Switches between active connected video inputs.
Turns the Audio on or off.
INPUT
MUTE
ZOOM +/-
Zoom s in and out. Press + to m ake the picture
larger. Press - to m ake the picture sm aller.
–
–
FOCUS +/-
MENU
Adjusts the focus of the im age.
Controls the m enu.
ZOOM
+
FOCUS
RESET
Resets all im age settings to the factory defaults.
Hold the button down to display the num ber of
hours that the lam p has already been used.
+
MENU
RESET
Figure 3-2 Control Panel keys
MENU
Press any of the MENU keys to display the menu options over the projected
image. If a menu selection is not made within five seconds, the menu will
disappear. Menu settings are automatically stored when you exit the menus
or turn off the projector. See page 3-9 for more information about using the
menus.
Using the Desktop Projector 5500 3 -3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL P ANEL INDICATORS
Power, warning, and alert indicators give you important information about
how your projector is working.
INDICATOR FUNCTION
ON
LAMP
TEMP
ON
Glows green if AC input and projector power
supplies are okay. Glows red if not, or if the air
filter door is rem oved.
STANDBY
/ON
INPUT
MUTE
Glows orange while in standby m ode.
Flashes green during lam p start-up.
Flashes orange during lam p cool-down.
–
–
ZOOM
TEMP
LAMP
Glows red to warn of an over-tem perature
condition or if the air filter door on the bottom of
the projector is open.
+
FOCUS
Glows red if the projection lam p burns out.
Flashes red if the air filter door is rem oved.
+
MENU
RESET
Figure 3-3 The DP5500’s Control Panel indicators
3 -4 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
TEMP
The TEMP indicator illuminates if the projector overheats or if the air filter
door on the bottom of the projector is open. A thermostat automatically
turns off the power to the lamp until the projector cools.
If an over-temperature condition occurs, perform the following checks while
you allow the projector to cool:
•
Make sure that the room temperature is below 95° F (35° C).
•
•
Check the intake and exhaust vents. Clear any obstruction to the air flow.
Make sure that the fans are working. If the projector has reached an
over-temperature condition and the fans are working, you should feel a
strong flow of hot air from the top vent and a strong rush of air directly
into the front and rear of the projector. If either fan is not working, the
projector needs service.
After the projector returns to its normal operating temperature, you must
turn the main power switch off and back on to clear the over temperature
indicator. Press the STANDBY/ON key on the control panel to relight the
lamp.
NOTE: The rem ote control’s STANDBY/ON button will not function after an
over-tem perature condition until the m ain power switch is turned off and on
and the lam p is turned on from the Control Panel.
LAMP In d ic a t o r
The LAMP indicator flashes red if the air filter door is removed. It will
show solid red if the lamp burns out.
CAUTION! If the lam p fails during a presentation, m ake sure that the
projector cools for a few m inutes with the power off before attem pting to
change the lam p. See page 4-2 for instructions on changing lam ps. The lam p
and surrounding parts get very hot. Use appropriate care when changing
lam ps.
Using the Desktop Projector 5500 3 -5
Download from Www.Somanuals.com. All Manuals Search And Download.
US ING THE REMOTE CONTROL
The remote control contains all the key functions available on the DP5500
control panel, as well as several additional features. For best results, aim the
remote control at the projection screen or at the projector’s front panel. Do
not obstruct the red infrared eye located on the front of the projector.
1
RIGHT
RESET
2
STANDBY
MENU
3
13
12
+
+
ZOOM
FOCUS
4
–
–
11
10
5
9
8
6
7
Figure 3-4 Rem ote Control and Infrared Eye
3 -6 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY
FUNCTION
1
2
J OYSTICK
RIGHT/RESET
Functions as arrow keys or as a m ouse.
Resets the projector settings to the factory
defaults if the m enus are open. Functions
as a right m ouse button if the projector is
in Host m ode (see page 3-8).
3
4
5
MENU
Displays or hides the m enu.
Adjusts the focus.
FOCUS +/-
VOLUME +/-
Decreases or increases the volum e of
internal and/or external speakers.
6
7
MUTE
Turns audio on or off.
RGB 1/2
Switches between connected com puter
sources.
8
9
VIDEO 1/2
SEARCH
Switches between connected video
sources.
Switches between all connected and
active video sources.
10
11
12
13
BLANK
Turns a solid background on and off.
Starts and stops the break tim er.
Zoom s in and out.
TIMER
ZOOM +/-
STANDBY/ON
Turns the lam p on and off.
Using the Desktop Projector 5500 3 -7
Download from Www.Somanuals.com. All Manuals Search And Download.
US ING THE J OYS TICK
Use the joystick to move through the menus and select items or change
values in them. You can also use the joystick as your system mouse if you
install the serial cable and follow the boot instructions detailed in the Host
Mode section (see below).
•
Move the joystick left or right to move across the menus.
•
Move the joystick up or down to move up or down in a menu. Move the
joystick up to move up one level when you are at the top of a menu.
•
Press the joystick to make a menu selection.
If you have are operating in Host Mode, the joystick will provide the
following functions:
•
Move the joystick up, down, left or right to move the cursor.
Press the joystick to initiate a mouse click.
•
•
Press the joystick twice for a double mouse click.
OP ERATING THE P ROJ ECTOR
The control panel and remote control provide access to all of the projector’s
features. Press a key to select a function or to navigate through the menus.
Op e ra t in g Mo d e s
The DP5500 can operate in Local or Host Mode.
Local Mode
Any time you activate the projector’s menus, the projector is in Local Mode.
In Local Mode, the remote control can be used to move through and select
items in the projector menus.
Host Mode
The DP5500 can emulate a serial mouse, allowing you to control your
computer from the joystick on the remote control. You do not need a special
mouse driver to emulate a serial mouse with the remote control.
To use your remote as the system mouse:
1 Turn off your computer and disconnect the mouse.
2 Connect one end of the Proxima serial data cable to the computer’s serial
port and the other end to the CONTROL port on the projector.
3 -8 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Turn on the projector and light the lamp.
4 Turn on your computer. It should detect the projector as a serial mouse.
5 Use the joystick on the IR remote control to move the mouse.
Notebook users may need to disable their integrated pointing device before
using an external serial mouse. Consult your notebook's user’s guide for
instructions on connecting a serial mouse.
THE GRAP HICAL US ER INTERFACE
Your DP5500 graphical user interface makes it easy to control all of the
projector’s functions. Menu selections can be made with the control panel
or the remote control.
NOTE: Menu selections will change based on the type of video source you
have selected.
Us in g t h e Me n u s w it h t h e Co n t ro l P a n e l
1 Press any of the MENU keys to display the on-screen menus.
2 Press the and MENU keys to select the desired menu. The items on
the menu highlighted in green can then be changed.
3 Use the ▲ and ▼ MENU keys to move up or down a menu column or to
change a menu value. For some items (e.g. Video Source), you may also
need to use the and keys to access an item.
4 The menus automatically disappear after five seconds. Settings are
automatically saved when you exit the menus or turn off the projector.
Us in g t h e Me n u s w it h t h e Re m o t e Co n t ro l
1 Press the MENU key to display the on-screen menus.
2 Move the joystick to to the left or right to adjust highlighted menu items.
3 Move the joystick up or down to select items in a menu column or to
change a value. For some items (e.g. Video Source), you may need to
move the joystick left or right to select an item.
4 Press the center of the joystick to change a value or to select a check box.
5 Move the joystick away from you to move up one level in any menu.
6 Press MENU again to close the menu, or wait five seconds and it will
automatically disappear. Settings are automatically saved when you exit
the menus or turn off the projector.
Using the Desktop Projector 5500 3 -9
Download from Www.Somanuals.com. All Manuals Search And Download.
US ING THE MAIN MENU
When you press MENU, the Main menu appears at the top of the screen.
Figure 3-5 Main m enu
To turn the menu off, press MENU again. The menus will automatically
disappear after a few seconds.
The following table lists the main menu options that you can select. The
Input and Image menus display only those items that are relevant to the
selected input source (computer, video, or S-Video).
MENU
SETUP
INPUT
IMAGE
OPT
FUNCTION
Adjusts im age quality and position.
Selects a video input source.
Allows im age inversion and other functions.
Changes com m unication functions.
De fa u lt S e t t in g s
The projector's factory settings are indicated by
in the individual
menu tables. Press RESET when any menu item is selected to return it to the
factory default.
3 -1 0 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
S ETUP MENU
The SETUP menu is used to adjust image quality and position. The
selections are different for each type of video source. The computer source
Setup menu is shown below.
Figure 3-6 Setup Menu Screen
OP TION
VOLUME
BRIGHT
WHAT IT DOES
S OURCE
All sources
All sources
Increases or decreases the volum e level.
Increases or decreases the intensity level
of the projected im age.
CONTRAST
SHARPNESS
COLOR
Adjusts the contrast in the projected im age.
Adjusts the sharpness of the im age.
All sources
Video only
Video only
Adjusts the color saturation for NTSC, PAL,
or S-VIDEO sources.
TINT
Adjusts the red or green color balance for
NTSC, or S-VIDEO sources.
Video only
(Except PAL)
V. POSIT
H. POSIT
H. PHASE
Adjusts the vertical position of the
projected im age.
Com puter only
Adjusts the horizontal position of the
projected im age.
Com puter only
Adjusts the horizontal phase setting. Use this Com puter only
setting if you see uneven horizontal features,
streaks, or shim m ering in a com puter
video im age.
H. SIZE
Adjusts the width of a com puter display.
Com puter only
Using the Desktop Projector 5500 3 -1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
INP UT MENU
Use the Input menu to select a video source.
•
Use the Arrow keys to select a source.
•
•
If you choose Video 1 or Video 2, select a video format.
Select Test Pattern to adjust the focus.
Figure 3-7 Input m enu
MENU ITEM
RGB 1 or 2
OP TIONS
FUNCTION
Selects the RGB 1 or 2 port.
VIDEO 1 or 2
Selects the VIDEO 1 or 2 port
and the video signal type:
AUTO, NTSC, PAL, or SECAM.
TEST PATTERN
Displays a full-screen test pattern.
3 -1 2 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE MENU
This menu is used to adjust the projected video image and select how the
projector will display.
Figure 3-8 Im age m enu
MENU ITEM
OP TIONS
FUNCTION
MIRROR
Standard operating m ode.
Flips the picture horizontally,
vertically, or horizontally and
vertically.
BLANK
Selects a blank color (white,
blue, or black).
REVEAL
Selects the speed for revealing
an im age.
MENU SIZE
Changes the on-screen m enu
size.
MESSAGE
CYCLOPS
Turn the on-screen im age source
m essages on or off.
Initiates Cyclops calibration.
See the Cyclops User’s Guide for
m ore inform ation. Press CANCEL
to cancel the calibration.
Using the Desktop Projector 5500 3 -1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
OP TION (OP T.) MENU
The OPT menu is used to control the projector’s communications settings.
Figure 3-9 OPT Menu Screen
3 -1 4 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ITEM
OP TIONS
FUNCTION
COMM SPEED
Selects the speed of data
transm ission.
COM. BITS
Selects the form at of data
transm ission:
Use 7N1 for 7 data-bits, No
parity, 1 stop bit.
Use 8N1 for 8 data-bits, No
parity, 1 stop bit.
MOUSE
Selects the speed of m ouse
m ovem ent.
TIMER
Sets the duration of the Break
Tim er.
LANGUAGE
Sets the language for the m enu
displays.
AUTO OFF
Sets the tim e the projector can
run with no action before it will
autom atically turn off. The
m axim um is 99. Press RESET to
set it to zero.
Using the Desktop Projector 5500 3 -1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t in g t h e Tim e r
You can set the Timer to count down for breaks, class activities, and other
presentation requirements.
1 From the Options menu, choose Timer and press the right MENU key on
the control panel or move the joystick to the right.
2 When the Timer menu appears, use the MENU keys on the control panel
or the joystick on the remote control to set the time.
3 Press TIMER on the remote control, and the clock will begin to count
down.
QUICK MENUS
The DP5500 has Quick Menus that allow you to easily adjust the volume,
focus, and video source. Adjustment slide bars appear at the bottom of the
screen when you press the following Remote Control keys.
ADJ US TMENT ITEM
VOLUME +/–
FUNCTION
Increases or decreases the volum e level.
Adjusts the focus of the im age.
Displays the currently selected video input port.
FOCUS +/–
SEARCH, VIDEO 1/2, RGB 1/2
3 -1 6 Chapter Three
Download from Www.Somanuals.com. All Manuals Search And Download.
C h a p t e r 4
Maintenance
There is very little involved with the care and maintenance of your DP5500.
However, common sense and periodic maintenance will ensure top
performance.
The lamp, lenses, mirrors, and LCD panels have been carefully aligned at the
factory to give you the clearest, brightest image possible. However, physical
abuse can cause misalignment or damage to the optical elements. Be careful
when you use or handle any of the optical elements.
CLEANING THE LENS
From time to time, you’ll need to clean the lens.
1 Take a piece of lens tissue and form it into a loose swab. Wet it with lens
cleaning fluid or denatured alcohol, and gently move it over the lens
surface.
2 Take a part of the lens tissue that you haven’t touched, and repeat the
process, going over the lens in another direction.
CAUTION! Your projector contains electric circuitry and sensitive optics.
Protect it from potential fluid spills.
Maintenance 4 -1
Download from Www.Somanuals.com. All Manuals Search And Download.
REP LACING THE LAMP
1 Turn off the projector.
2 Unplug the projector’s power cord from the wall socket and remove it
from the projector’s power receptacle.
3 Remove the screw on the right side of the rear panel and remove the
service door.
Figure 4-1 Rem oving the service door
4 Unscrew the four lamp assembly screws (they will not come out of the
lamp assembly).
Figure 4-2 Unscrewing the lam p assem bly retaining screws
4 -2 Chapter Four
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION! The lam p assem bly gets very hot during operation. Use
appropriate care when changing lam ps. Make sure that the lam p assem bly
has cooled for at least three to five m inutes before touching it.
5 Grasp the rear of the lamp assembly and firmly pull the assembly out.
Figure 4-3 Rem oving the lam p assem bly
6 Replace the old lamp assembly with a new one, carefully aligning the
power pins on the bottom, and pressing it firmly into place. When it is
properly placed, a small alignment mark etched on the projector chassis
will be visible below the lamp assembly.
7 Tighten the four lamp assembly retaining screws.
8 Replace the service door and screw it into place.
9 Replace the power cord.
Maintenance 4 -3
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING THE AIR FILTER
You should change or clean the air intake filter after every 250 operating
hours to maintain proper cooling. This filter is located on the bottom of the
projector, under the grill.
1 Disconnect all cables and cords from the projector.
2 Turn the projector on its side, connector panel down.
3 Remove both screws on the filter cover.
Figure 4-4 Rem oving the screws on the air filter cover
4 Press up on the air filter cover tab to release the cover latch and then pull
the grill cover down and out (see Figure 4-5).
Figure 4-5 Rem oving the air intake filter grill
4 -4 Chapter Four
Download from Www.Somanuals.com. All Manuals Search And Download.
5 After you have disassembled it, clean the air filter using a vacuum cleaner.
If it is still dirty, wipe the air filter with a moist cloth, then wipe it with a
dry cloth.
Figure 4-6 The com ponents of the air filter
6 Reassemble and reinstall the air filter.
CHANGING THE REMOTE CONTROL’S BATTERIES
If the remote control is not going to be used for awhile, remove the batteries
from the unit. If the remote control does not appear to be working properly,
replace the batteries.
To install or change the two AAA alkaline batteries in the remote control
unit:
1 Locate the battery compartment at the lower rear of the case. Slide the
cover off of the battery compartment.
2 Insert new batteries as illustrated inside the battery compartment.
3 Replace the cover.
CAUTION! Do not:
•
•
•
Use batteries not specified for this unit.
Use old and new batteries together.
Insert batteries incorrectly.
Maintenance 4 -5
Download from Www.Somanuals.com. All Manuals Search And Download.
C h a p t e r 5
Troubleshooting
WHERE TO GET HELP
If you need help:
1 Check the Troubleshooting Chart.
2 Call your dealer’s technical support line and explain your problem.
3 Call Proxima at:
USA. and Canada:
(619) 457-5500. Press 1 for Customer Service.
(619) 457-8542 (Fax)
Outside USA and Canada:
(619) 457-5500. Press 1 for Customer Service.
(619) 622-0173 (Fax)
Europe:
+31-43-358 5200
+31-43-358 5201 (Fax)
Internet (WorldWide Web)
Troubleshooting 5 -1
Download from Www.Somanuals.com. All Manuals Search And Download.
P ro je c t o r
P ROBLEM
LIKELY CAUS E
P OS S IBLE S OLUTION(S )
No im age projected
No power to projector.
Turn power ON.
Check AC cord.
Check power to electrical outlet.
Lam p not on.
Turn lam p ON.
Lam p burned out.
Replace lam p assem bly.
Over tem perature indication. Allow projector to cool; turn
projector OFF and then ON.
Make sure the bottom air filter
door is closed.
No com puter im age
projected
Loose cable.
Check and secure cable
connections.
No power to com puter.
Turn on com puter.
Incom patible video system .
If possible check com puter with
another m onitor.
No video im age
projected
Video source(s).
Loose cable.
Check power on the video
source(s).
Check and secure cable
connections between video
source and projector.
LAMP indicator
glow ing red
Burned-out lam p.
Replace lam p assem bly.
Displayed im age
not square
Projector set at an
im proper angle to
projection screen.
Adjust relative positions of
projector and screen.
(keystoning)
Projected im age
out of focus
Projection lens not focused.
Adjust the lens focus.
Projected im age
Zoom lens not adjusted
properly, or projector too
far from screen.
Adjust zoom lens, or m ove
projector closer to screen.
larger than screen
5 -2 Chapter Five
Download from Www.Somanuals.com. All Manuals Search And Download.
P ROBLEM
LIKELY CAUS E
P OS S IBLE S OLUTION(S )
Projected im age
Zoom lens not adjusted
properly, or projector too
close to screen.
Adjust zoom lens or m ove
projector away from screen
screen.
sm aller than screen
Im age off-center
H. or V. POSIT adjusted
incorrectly.
Adjust H. and/or V. POSIT; if
im age will not center, check for
com patibility problem s.
Com patibility problem .
Verify projector is im age
com patible with one of the
standards listed in Appendix A.
Misalignm ent or dam age to
optical elem ents.
Projector requires service.
No im age on the
com puter screen
Projector power is off or
projector is not running.
Com puter m ust be on for
com puter m onitor to display.
Lam p is burned out.
Turn off projector.
Replace lam p.
Cable not connected.
Connect cable.
Streaks on m onitor
Video cable plugged into
the com puter or projector
is upside down.
Check cable connections and
projector.
Faint screen
Low intensity.
Adjust BRIGHT (brightness)
and CONTRAST settings.
J ittery, fuzzy letters
Out of sync.
Adjust H. PHASE setting.
Cannot get entire
im age on screen;
scram bled im age
Com patibility problem s.
Verify projector is im age
com patible.
“Shim m ering” colors H. PHASE or BRIGHT setting Adjust H.PHASE or BRIGHT
out of adjustm ent.
(brightness) settings.
Colors w eak in
video m ode NTSC,
PAL, or S-VHS
Weak video signal.
Check for faulty video source,
bad connection, or frayed
cable.
COLOR setting m ay be
too low.
Adjust color setting.
Troubleshooting 5 -3
Download from Www.Somanuals.com. All Manuals Search And Download.
P ROBLEM
LIKELY CAUS E
P OS S IBLE S OLUTION(S )
Getting excessive
w hite or w ashout
in NTSC, PAL, or
S-VHS m ode
CONTRAST setting is
too high.
Adjust CONTRAST setting, then
adjust BRIGHT (brightness)
setting.
No audio
Audio source(s).
Check audio source(s) for
power ON and proper operation.
Loose/im proper cable.
Check and secure cabling
between audio source(s) and
projector.
TEMP
Air vent(s) clogged.
Internal fan failure.
Allow projector to cool; clear
obstructions from vents
Clean or replace filter as
necessary.
indicator
Allow projector to cool;
Check for fan and blower
operation, service if necessary.
Bottom air filter door
is open.
Close bottom air filter door.
Rem ote Control
doesn’t w ork
Batteries upside-down or old. Check battery placem ent or
replace with new batteries.
Projector IR receiver window Rem ove object obstructing red
is blocked.
IR receiver on front of projector.
Out of range.
Move within 20 ft. and within a
30° angle from the front of the
projector.
Rem ote Control
w on't w ork as
m ouse control
Serial cable not connected.
Connect cable.
Wrong m ouse driver installed. Use Microsoft serial m ouse
driver.
Projector powered up out
of sequence.
Power up projector, connect
cable, and power up com puter.
5 -4 Chapter Five
Download from Www.Somanuals.com. All Manuals Search And Download.
RETURNING YOUR DP 5 5 0 0 FOR REPAIR
If the DP5500 or any of its accessories are determined to be defective:
1 Contact Proxima Customer Service to request a Return Material
Authorization (RMA) number.
2 Send the defective unit, including any accessories, cables, and the remote
control, with the RMA number clearly marked on the outside of the
shipping box, freight prepaid, to:
USA and Canada:
Proxima Corporation
RMA #
Europe:
Proxima Corporation
RMA #
9440 Carroll Park Drive
San Diego, CA 92121
Horsterweg 24
6191 RX Beek
The Netherlands
3 Pack the projector in its original box for safe shipment (include all
accessories, cables, and the remote control). If you no longer have the
original shipping materials, contact Proxima Customer Service for
packaging.
ORDERING P ARTS
Please order replacement and accessory parts through your local reseller, or
call Proxima at:
USA and Canada:
Europe:
(800) 447-7694 or
(619) 457-5500
+31-43-358 5200
+31-43-358 5201 (Fax)
Press 1 for Customer Service
Fax: (619) 457-8542
Outside USA and Canada:
(619) 457-5500
Press 1 for Customer Service
Fax: (619) 622-0173
Troubleshooting 5 -5
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d ix A
Specifications
DP 5 5 0 0 S P ECIFICATIONS
Color
16.7 m illion colors
Display
3 polysilicon liquid crystal panels
NTSC, PAL, SECAM, and S-VHS
250 Watt, m etal-halide lam p
Zoom lens F3.0 ~ 3.8 f46.5 ~ 74.4m m
8.8°
Com patibility
Projection Lam p
Optics
Keystone Correction
Audio System
Inputs
One built-in speaker, 3 Watt
2 Com puter video
2 TV video (NTSC, PAL, SECAM, S-VHS)
2 Com puter stereo audio
2 TV stereo audio
RS-232 control port
Cyclops System
Outputs
Stereo audio
1 RGB m onitor
Pow er Source
Dim ensions
Weight
100 - 120 VAC, 5 A or 220 - 240 VAC, 2A
12.6 in. (W) x 6.9 in. (H) x 18.2 in (D)
23.1 lbs.
Com patibility
PC (VGA)
Apple Macintosh & Powerbook series
Quadra, Centris, Video NTSC/PAL/SECAM/S-Video
Specifications A -1
Download from Www.Somanuals.com. All Manuals Search And Download.
A p p e n d ix B
Accessories and Replacement Parts
REP LACEMENT P ARTS
P ART
P ART NUMBER
Lam p Assem bly
Rem ote Control
Pow er Cord - US
Pow er Cord - Europe
VGA Video Cable
VGA - Mac Cable Adapter
S-Video Cable
L84
A15
C151-10
C152-10
C950-06
C951
C552-6
C550-6
C551-6
900-55010
280-00099
280-00153
AV Cable
Serial Cable
Mini-stereo to Mini-stereo Cable
Lens Cap
Air Filter
OP TIONAL ACCES S ORIES
OP TION
MODEL / P ART NUMBER
Rolling Hard Case
A295
A298
A2075
Rolling Soft Case
Cyclops Interactive Pointer System
Replacem ent Parts and Accessories B -1
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
Projector
Moving 2-3
A
G
AC Power switch 2-6
Accessories B-1
Getting Started 2-2
Positioning 2-2
Transporting 2-3
Graphical User Interface 3-8
AUDIO 1-5, 2-5
Projector Cooling and Airflow 2-4
Projector Operation
AUDIO OUT 1-5, 2-5
Audio Out Ports 2-14
I
Image Menu
Using a Mouse 3-8
Using Control Panel and
Remote 3-8
External Speaker System
Connection 2-14
External Stereo System
Connection 2-14
Adjust Submenu 3-12
Infrared Eye 3-6
Input Source Menu
Source Mode 3-12
Source Select 3-12
Sync Status 3-12
Audio Ports
Q
Monaural Source 2-12
Stereo Source 2-12
Quick Start
Desktop Macintosh computers
1-3
L
Desktop PCs 1-3
Notebooks 1-4
C
LAMP Indicator 3-5
Laptop Connections 2-9
Lens Cleaning 4-1
Circuit Breaker Reset switch 2-6
Computer Audio Port
R
Connecting a Monaural
Source 2-10
Connecting a Stereo Source
2-10
Remote Control Keys 3-7
Remote Control Unit 3-6
Repair of your DP5500 5-5
Replacement Parts B-1
Returning your DP5500 for Repair
5-5
M
Macintosh Adapters 2-8
Macintosh Connections 2-8
Main Menu 3-10
Maintenance
Computer Video Connection
Macintosh Computers 2-8
Notebook Computers 2-9
PC 2-6
Special Configurations 2-10
Connector Panel 1-5, 2-5
Connector Table 1-5, 2-5
Contents of Box
Lens Cleaning 4-1
MENU 3-7
MONITOR OUT 1-5, 2-5
MUTE 3-7
S
S-VHS 1 & 2 1-5, 2-5
Special Configurations 1-4
Accessories 1-2
Control Panel
N
T
Notebooks 1-4
Turning off the Projector 3-2
Keys Table 1-6
Control Panel Keys 3-3
Control Panel Lights 3-4
CYCLOPS 1-5, 2-5
Cyclops 1-6
O
V
Operating Modes
Host Mode 3-8
Local Mode 3-8
Ordering Parts 5-5
Over-Temperature 3-4
VGA Connections 2-7
VGA Video Cable 2-6
VIDEO 1 & 2 1-5, 2-5
Video Imput Ports
Cyclops Connection 2-13
Composite Video Connections
2-11
D
Desktop Projector
Turning Off 3-2
DP5500
S-VHS Connections 2-11
VOLUME 3-7
P
Parts
Optional Accessories B-1
Replacement B-1
Power 3-4
Power receptacle 2-6
Power to the Projector 2-6
Powering Up Projector 3-1
Powering Up 3-1
F
Focusing the Image
Non-Zoom Models 3-2
Zoom Lens Models 3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
|