Plawa Network Card Scrivo1 User Manual

User’s Guide

Product Specification and System Requirements

How to use scrivo.1

Bluetooth Installation and Configuration

scrivo.1 Driver Installation and Configuration

How to use following utilities Finger Note

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank You

Contents

Thank you for purchasing the scrivo.1. You have made an excellent choice for your next digital

input device. scrivo.1 is designed to be used for many functions with ease.

1. Description

page

Trademarks

Features & Shipment Contents

Specifications

The following are registered trademarks of plawa-feinwerktechnik GmbH & Co. KG: scrivo.1, the

scrivo.1 logo, and plawa mobilities logo is a trademark of plawa. Other product names mentio-

ned in this guide may also be trademarks or registered trademarks of their respective owners.

Bundle Software

2. System Requirements

3. Using scrivo.1

page

Manual Notice

plawa reserves the right to make changes to this manual and to the equipment described herein

without notice. Considerable effort has been made to ensure that this manual is free of inaccura-

cies and omissions. However, plawa makes no warranty of any kind including, but not limited to,

any implied warranties of merchantability and fitness for a particular purpose with regard to this

manual. plawa assumes no responsibility for, or liability for, errors contained in this manual or for

incidental, special, or consequential damages arising out of the furnishing of this manual, or the

use of this manual in operating the equipment, or in connection with the performance of the

equipment when so operated.

page

Correct way to hold scrivo.1

OCR (OCR: Optical character recognition)

Example of using scrivo.1

4. Installing & Configuring Bluetooth

page

Installation for Windows 2000/XP

Update Bluetooth setting in Windows XP service pack2

Installation for Windows 98SE/ME

5. scrivo.1 Driver and Software

page

Installing scrivo.1 driver and utilities

scrivo.1 Driver Setting

Changing mode and usage

6. Using Finger Note

page

What is Finger Finger Note^TM?

Finger Note^TMBasic Menu

7. Troubleshooting

page

8. Contact and Support

Download from Www.Somanuals.com. All Manuals Search And Download.

Software package

1. Description

Make hand written notes, design and contol your desktop. Create MMS messages on a smart

phone and manage memos on a PDA.

Finger Note^TM(Only for PC users)

Create memos and highlight text in any program. This program allows users to open Microsoft

PowerPoint, Word, Excel by slides. User can also save slides with created memos. (Image file for-

mat). This program is very especially useful in presentations. (Refer to “Using Finger Note^TM“).

Features

Optical navigation & mouse-hover technology

Portable and convenient: light and durable (perfect for notebook users)

Ergonomic design: Fits comfortably in your hand. No wrist pains after long hours of use.

USB connection: plug and play.

Practical use in other Software programs*

Paint: It allows the user to draw or write in Microsoft Paint in Accessories, something which

users cannot do using a typical mouse.

Includes application software which maximizes usage of scrivo.1 “Finger Note^TM”

(Only for PC users).

Windows XP or Office XP installed on PC: Practical uses XP´s handwriting recognition (OCR).

Practical use in graphic programs in with other tablet systems.

Shipment Contents.

Scrivo.1

Charger (receiver)

Manual

2. System Requirements

scrivo.1 requires the following minimum system configuration:

Pad

Software Finger Note^TM

Driver CD

Pentium II 400MHz or equivalent

Operating System: Windows 98SE/ME/2000/XP, Mac O 9.2-X

System Memory: At least 32MB or above

Hard Drive: At least 11.5MB available memory

HID Support with USB port

Specifications

Communication: Bluetooth

Frequency: 2.4 GHz

Range: Within 10 Meter radius

Resolution: 800 dpi

Connection: USB

Battery 3.7 V DC, 400 mA Li Polymer

Continuous usage time: 5 hours

Stand by usage time: 26 hours (80 hours in power saving mode)

* PC without USB ports cannot be used.

* Requires 3rd party software when you use it on a PDA or mobile phone. (Not included)

scrivo.1

Size: 157 (L) x18 (B) x30 (H) mm

Weight: 40 g

Power: 3.7 V rechargeable Battery

Charger:

Size: 108 (L) x 49 (B) x 42 (H) mm

Weight: 100 g (including wire)

Cable length: 1.7 m

Power: USB power (DC5V)

Download from Www.Somanuals.com. All Manuals Search And Download.

Correct way to hold scrivo.1

3. Using scrivo.1

When using a typical ballpoint pen, you can

write on a paper regardlessof how you hold the

pen. On the other hand, if you hold a fountain

pen and rotate its pen tip to an upright posi-

tion, you cannot write at all since the tip of a

fountain pen has a different structure to that of

a typical ballpoint pen. Similarly, the performan-

ce of scrivo.1 greatly depends on how you hold

it. As a result, when you try to write a memo

or draw a simple graph with scrivo.1, holding it

incorrectly may result in unexpected output

such as rotated letters, tilted axis and so on.

Therefore, you should be careful when you hold

scrivo.1

scrivo.1 has a power switch, two function buttons, and two indicators.

Power switch

Status-LED

Battery indicator

Pairing Button

Second button

The Ccorrect way to hold scrivo.1 is shown in the pictures below. The forepart, where the push

button is attached, should face the front

First Button

Power switch

Turn the power ON/OFF using this switch located on the bottom of the pen. Power switch must

be in the ON position before use. Switch to the OFF position if it’s not in use for a long period of

time.

Pairing Button

Front View

Side View

Reset the pen to initial stage. After successful initiation, Status LED light will blink green

continuously.

First button (pen-tip button)

Located on the end of scrivo.1 and has same function as the left button on a typical mouse.

If the angle of scrivo.1 and the surface is too low as shown in the figure (a), or if its forepart

does not face to the front as shown in the figure (b), (c), and (d), it will not perform correctly.

Second button (Jog button)

Located on the front top of the pen and has same function as the right button on typical mouse.

When you scroll the Jog switch, it will work like the mouse wheel scroll feature.

Status-LED

1) Green LED -> indicates status between Pen and Charger is ok.

- Blinking continuously: Initiating stage for pairing. (Blinking for the first 3 mins remain lit after

3 mins)

- No LED light: Complete Pairing Status.

- Continues to blink in 1-2 sec. interval: Power to receiver has been interrupted

2) Red LED – Check battery status

(a) Angle of pen and surface

is too low.

(b) scrivo.1 is turned to right.

- Need to recharge scrivo.1 when red LED blinks (continues to be usable for 30 mins)

Battery indicator

Red LED during charging and green LED when fully charged. Total charging time: 3.5 hours.

(d) scrivo.1 is turned to left.

Download from Www.Somanuals.com. All Manuals Search And Download.

OCR (Optical Character Recognition)

Changing Pen Tip

scrivo.1´s pen tip is designed to withstand abrasion. However for best results, the pen tip needs

to be replaced after it has been used for a long period of time.

If users´ PC has Windows XP or Office XP installed, they will be able to use their OCR programs

to convert their users own handwriting to text or save it as a picture file. (Handwritten to text

conversion will not be supported if OCR isn’t Windows XP and Office XP or above isn’t installed.)

_ First, prepare one of the tips included with

scrivo.1.

For those environments that support OCR programs, IME pad is located on the task bar and can

be launched by clicking the icon (IME Pad). Users can write or draw using this function.

_ Hold the tip and pull towards arrow shown in

the figure on left (Use pincer or pliers for your

convenience).

If the task bar isn´t visible, click the Windows

key – located on the bottom left of your key-

board, to enable the task bar.

_ Insert the new tip into the now empty space.

_ Place the pen on a hard surface and gently

press the tip.

Example of using scrivo.1 (Only for PC users)

OCR function (MS Office XP or above)

To use the OCR function in Windows XP, open “Regional and Language Options” in the “Control

Panel” and click Details in the “Languages” tab to open the “Text services and input languages”

dialog box where you can add OCR function.

Converting handwriting into text using Office XP.

Finger Note^TM

If Windows XP is not installed but has Office XP or above, open “Text service” in the “Control

Panel” to add OCR function.

Mouse Pad

scrivo.1 is designed to work on most surfaces except surfaces made out of materials that don’t

reflect lasers such as glass or white paper. Use the pad included for optimum results for writing,

drawing and other mouse function uses.

Taking memos directly on the desktop using Finger Note^TM.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using in Microsoft Paint or as a graphic tool

Using in Microsoft OneNote

scrivo.1 can be used in graphic software programs such as Corel Painter, PhotoShop,

PaintShop, Microsoft Paint: www.corel.com / www.adobe.com / www.jasc.com

Correction function in Word documents

Microsoft OneNote is a program with wich you can input not only with the keyboard, but also

with a pen.

Using correction function in Microsoft Word. Practical use in document-creating applications

such as Microsoft Excel, Power Point, etc.

4. Installing and Configuring Bluetooth

4.1 Windows 2000/XP Environment

Input signatures

Please install/configure in the following order

Bluetooth Software (BTW) Installation

Connect charger to your computer

Bluetooth Configuration

Software Installation

Input signatures in MS Word, PDF files, and other documents.

1) Windows Installer will automatically run when you insert the CD into CD/DVD ROM drive. If

Windows Installer does not run automatically, use Windows Explorer to find the Setup.exe file on

the CD to launch the setup program. Click (Next) to continue software installation.

Download from Www.Somanuals.com. All Manuals Search And Download.

2) Please read the License Agreement carefully and choose “I accept the terms in the license

5) The following picture shows the installation process.

agreement”. Then click [Next] to continue setup.

6) During the process, you might get a message as shown below. This tells you that you currently

do not have the Bluetooth signature program, but you can continue with installation without any

problems.

3) Assign a Destination folder for Bluetooth software. We recommend you leave the default.

Click [Next] to continue with the next step.

4) The following window appears when ready to install. Click (Install).

During the process, you might receive warnings as shown below. However, these will not harm

your computer in any way. You may continue with installation.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) Checks whether hardware installation is completed or not. If you want to install hardware later,

Connect charger to your computer

simply click [Cancel]. Always, install software first and then hardware.

Bluetooth software installation is complete. Lastly, you need to connect pen and cradle with confi-

guration.

1) Connect your charger to an available USB port.

2) “Found New Hardware Wizard” window will open once hardware setup is completed and will

search for “CSR USB Bluetooth Device”.

8) Click (Finish) to complete the software installation.

Windows 2000

Windows XP

3) When the new device is detected, the [Add Hardware Wizard] starts automatically. Select

[Automatic Installation (recommended)] and click [Next] to proceed.

(This process may take place automatically depending on your OS or user setting, and you may

not have to do it manually. If so, simply proceed to the next step)

9) Restart your computer after completion.

4) “Setup Wizard” will automatically set the selection list of installation program and copy the

necessary files to the system. Click [Finish], and run “New Device Wizard”. The Bluetooth icon

will be created in the System Tray after the installation has successfully finished.

Depending on your system specification, you may or may not get a ‘restart’ message. If you don´t,

you have to restart your system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth Configuration

4) The following is the list of Bluetooth services. In this case, scrivo.1 does not require any of the

services so you can uncheck everything and click [Next] to continue with the next installation.

After hardware installation is complete, you need to configure the Bluetooth connection. This pro-

cess is required in Bluetooth technology different from previous version such as IR or RF techno-

logy.

1) The following is a basic Bluetooth setup process. If the “Initial Bluetooth Configuration

Wizard” does not appear, double click the “My Bluetooth Places” icon to run the basic Bluetooth

software setup process. Click [Next] to continue the process when the Wizard asks to add the

icon on the system.

5) Click [Skip] to continue when you see the following message.

2) Click [Next] after entering the computer name and type.

6) When configuration is complete, you will see the following message. Simply click [Finish].

3) Click [Next] to start the wizard.

Download from Www.Somanuals.com. All Manuals Search And Download.

7) When you are done with configuration, double click [My Bluetooth Places] on the desktop. Or

right click the Bluetooth Icon in the taskbar to run [Explore My Bluetooth Places].

You can select [Bluetooth] -> [Search For Devices] from the menu instead of [Find Bluetooth

Devices].

8) Turn on the scrivo.1 switch after you have completed previous steps.

If you run [My Bluetooth Places] and get the following picture, simply select [Bluetooth] ->

[Search for Devices] from menu the in order to find it.

Pairing-Button

Power switch

Status-LED

If you turn on the switch, the Green LED will blink rapidly.

This means that the pen is connected. If the LED light

blinks slowly or is not blinking at all, push the pairing but-

ton so that the LED light blinks faster. You can use a ball-

point to push the paring button.

10) After you search for devices, you see the scrivo.1 icon as shown in the following picture.

Double click this logo icon7. If you still don’t see the icon, go back to step 3, try pairing correctly

and search again.

9) When your pen is connected, run [Find Bluetooth Devices] in [My Bluetooth Places].

Download from Www.Somanuals.com. All Manuals Search And Download.

11) After you double click the icon, a window will pop up and ask for your confirmation. Click (Yes).

4.2 Update Bluetooth setting in Windows XP service pack2

1. Please check the Bluetooth Device is already in the “Device Manager”, as shown on the

following image.To open the “Device Manager”, please follow the following steps: Press the right

mouse button on the Desktop, press “My

Computer“ and then “Properties“. Open the

option “Hardware“. You will see the button to

open the “Device Manager“.

12) After device installation is complete, you will see a green arrow next to the icon. This is the

final step and you will be able to move scrivo.1.

2. If you installed Windows XP service pack2 and the device is installed correctly, the Bluetooth

icon will be displayed as shown in the next image.

3. After installing the Bluetooth device correctly, click the Bluetooth icon and select “Open

Bluetooth Settings”.

You can check your connection status by looking at the Bluetooth icon in the system tray

on the bottom right.

Enable (started)

Disabled (stopped)

Connected

White

Red

Green

Once you complete these steps, you do not need to go through them again unless you switch

your computer. These settings will remain even after you restart your computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. After step number 3, you will see a new window as shown below. Select “COM Ports” and

6. Select “Options” in the Bluetooth Devices Window and then check the correspondent boxes as

shown below.

then click the “Add” button for adding COM

Ports.

7. Select “Devices” in the Bluetooth Devices Window and then click the “Add” button for adding

the device.

5. In the Add COM Port window, select the “Incoming” button and click “OK”, as shown above.

The window with the added COM ports will

appear, as follows. You can check your connec-

tion status by looking at the Bluetooth icon in

the system tray on the bottom right.

8. When the window “Add Bluetooth Device Wizard“ is displayed, turn on scrivo.1´s power

switch and pair it with scrivo.1´s cradle (receiver). Then, click “Next”.

Download from Www.Somanuals.com. All Manuals Search And Download.

9. The system will search for the device. If the system can not find the device, push the pairing

4.3 Windows 98SE/ME Environment

button, and then click “search again“.

Please install/configure in following order

Bluetooth Software (BTW) Installation

Connect charger to your computer

Bluetooth Configuration

Software Installation

1) Windows Installer will automatically run when you insert the CD into your CD/DVD ROM drive.

If Windows Installer does not run automatically, go to Windows Explorer to find the Setup.exe file

on the CD to launch the setup program. Click [Next] button to continue software installation.

10. After completing the search, select the option “Don't use a passkey“. Then click “Next”.

2) Please read the License Agreement carefully and choose “I accept the terms in the license

agreement”. Then click [Next] to continue the setup.

11. Finish adding the Bluetooth device by clicking “Finish”.

3) Assign a Destination folder for Bluetooth software. We recommend you leave the default. Click

[Next] to continue with the next step.

Download from Www.Somanuals.com. All Manuals Search And Download.

4) When the software is ready to be installed, the following window appears. Click (Install).

8) Click (Finish) to complete software installation.

5) The following picture shows the installation process.

9) Restart your computer after installation is complete.

6) During the installation process, you might be asked to put the Windows 98SE/ME CD into

your CD-ROM drive as shown in the following picture. If you have already put your Bluetooth soft-

ware CD into the CD-ROM drive, simply take it out and replace it with the Windows 98SE/ME

CD. Your PC will then automatically start to copy files from the CD.

Connect charger to your computer

Bluetooth software installation is complete. In the final step, you need to connect the pen and

charger and configure.

1) Connect your charger to an available USB port.

2) When you connect the device into your USB port, a window should pop up, telling you “New

Hardware detected’. [Add New Hardware Wizard] will run and install the correct driver on your

system. (Although it is plug and play, you might need the CD).

7) This asks if you want to install hardware now or not. If you want to install hardware later, sim-

ply click [Cancel]. Always install software first and then hardware.

Warning: If the installed hardware cannot be found, select [Start] > [Control Panel] > [New

Hardware] and detect the new hardware. Then, install the driver manually.

Bluetooth Configuration

Bluetooth configurations in a Windows 98/ME environment are the same as Windows 2000/XP.

Please refer to the Bluetooth connection configurations on page 16 (You might need the

Windows CD in a Windows 98/ME environment).

Download from Www.Somanuals.com. All Manuals Search And Download.

5.2 scrivo.1 driver setting

5. scrivo.1 Driver and Software

After installation, an icon will be created in the System Tray as shown in the figure below .

5.1 Installing scrivo.1 driver and utilities

Caution: Please exit other programs before connecting scrivo.1 or installing scrivo.1 driver

and utilities.

Setup Bluetooth communication pen and receiver before installing scrivo.1 driver. (Use Bluetooth

Dongle CD). Insert the scrivo.1 driver CD into your CD-ROM drive and install the driver after set-

ting up Bluetooth communication.

scrivo.1 System Tray logo figure. Open the scrivo.1 Control Center by

clicking scrivo.1 Setting.

1) Select your language.

Installation files will be automatically loaded when the CD included is inserted into the CD-ROM

drive. Select your language to install driver and utilities.

Another way to open the scrivo.1 Control Center is to press the hot key (Defalt: F12). Simple

settings can be done here. Choose “Advanced Configuration” for detailed settings.

Speed

2) Choosing setup type.

Select installation details and click [Next] to continue.

Install scrivo.1 USB driver – USB driver will be installed if selected.

Mouse Mode – This setting configures acceleration in mouse mode. Acceleration can be

adjusted by moving the slider (Default: Middle)

Pen Mode – This setting configures acceleration in pen mode. Acceleration can be adjusted by

moving the slider (Default: 45)

Install Utilities – Finger Note^TMwill be installed if selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

284

295

Double Click

Wheel setting

This setting allows users to adjust the double clicking action using scrivo.1. Move your cursor to

the target diagram and double click. The values in the small dialog box will change. By clicking

“Apply” you can set the value according to the double click action you just made. It will be helpful

to click several times. The corresponding range

This setting allows users to configure the wheel function. The default value is 3 lines when opera-

ting the window with the mouse pointer. Users can change the number of lines, reverse scroll,

select window.

values appear. If you want to change it to the

default setting, simply click on “Default’.

(Default: Speed 600ms, Range 32x32 pixels).

If speed is set too fast or too centred in the

circle, users might experience discomfort with

scrivo.1.

Coordination

scrivo.1 info

This setting allows users to choose between right-handed and left-handed use. This is convenient

for left-handed users. Select “coordinates” and then click and drag the red coloured area to draw

out the most comfortable position. This setting applies the best hand position for users. When

you want to apply the default setting, simply click (Set default).

An overview of scrivo.1 driver version information and manufacturer information is shown here.

Hot Key

For user’s convenience, a hot key feature has been added to open the scrivo.1 control center

and to switch between pen/mouse mode. The

“Finger Note^TM” utilitiy can also be used with a

hot key. Users can open the scrivo.1 control

center or switch mode by pressing the key that

has been set for the hotkey on any screen. The

hot key’s key can be customized by users.

(Default: Open scrivo.1 control center -> F12,

Mouse/Pen Mode Change -> F4 Finger Note^TM

->F6).

Download from Www.Somanuals.com. All Manuals Search And Download.

5.3 Changing mode and usage

Changing mode

Restarting Driver

If scrivo.1 is connected to the PC after the PC has been started, scrivo.1 may not operate correct-

_ Changing mode using the hot key

ly. If so, end the scrivo.1 driver in the System Tray and restart the driver. (Refer to the figure below)

Change mode using the hot key (Standard: F4). It will appear on the screen at the same time

when mode has been changed as shown in the figure below.

_ Changing mode by using System Tray

Click the scrivo.1 icon and choose between Pen or Mouse mode as shown in the figure below.

The check mark (√) indicates current mode.

Right Mouse Button

scrivo.1´s push button, located on the front of scrivo.1, functions the same way as the right

mouse button. The keyboard can be used as the right button function for those who are having

difficulties using the push button. Place the cursor to where you want to click, click the tip once,

and then press the keyboard key which located on the bottom right hand side of your keyboard

for the right button function.

Changing Mouse mode to Pen mode

Changing Pen mode to Mouse mode

_ Changing mode by opening the scrivo.1 Control Center

Open the scrivo.1 Control Center by pressing the Hotkey (Default: F12). Choose between

Pen mode/Mouse mode and click [OK].

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Using Finger Note

b. Windows Mode button

This button allows you to go back to the Windows mode from captured screen mode. Here, you

can work on your computer in normal setting.

6.1 What is Finger Note ? (Only for PC users)

Finger Note^TMis a tool which can be used to capture anything on your computer screen. You can

also write and draw on the captured image, and save it to file.

c. List button

6.2 Finger Note Basic Menu

This button enables you to browse through all

previous captured screens and re-open them.

The followings are Finger Note^TM’s running images

This menu appears when you first run the program.

Arrow buttons can also be used to select an

image from the list.

If you click on the red arrow that is on the very right side.

d. Save button

This button enables you to save captured images under a different file name. (Image file)

e. Board image button

You can have more options and buttons like the image above. Once you click the red arrow button

again, you get to see only basic menu like before.

6.3 Each button’s use

a. Screen capture button

You can load a saved template board image

and work on it.

This button is to capture the whole computer

screen in order to work on the captured

image.

Download from Www.Somanuals.com. All Manuals Search And Download.

f. Import documents button

m. Eraser button

This button enebles you to erase writing or drawing in case you make mistakes. The left button is

for erasing only the parts you want to erase. The right button is used to clear everything.

n. Line button

This button enables you to draw a straight line. Left click your mouse and hold it down, then drag

it to the point you want to draw a line.

o. Circle button

This button imports other documents

(*ppt,*doc,*xls, etc…) into the slide list.

Left click your mouse and hold it down, then drag it until you make the circle the size you want.

g. Pen button

p. Rectangle button

This button enables you to write or draw lines after you capture a screen. Your cursor changes

into a regular pencil shape.

Left click your mouse and hold it down, the drag it until you make the right size of rectangle.

q. Arrow button

h. Highlight Pen button

Click this button and hold the mouse left button, then drag it to the point where you want to draw

the arrow.

This button has a highlight feature and is different from the pencil button. It can be used to high-

light something in a particular spot.

r. Wave line button

This button is to underline or highlight your notes. Drag it as much as you want to draw wave

line.

i. Pen diameter button

This button enables you to decide pencil/highlighter line thickness when you draw.

s. property setting button

j. Pen colour button

This is the colour preference button. You can choose your favourite colour and change your pen

colour accordingly. (In System Properties, you can use all colours supported by Windows).

k. Help button

You can change the pen default colour, pen

diameter, or 3 basic colours to your favourite

choice. You can also adjust the eraser tool

and colour size. If you click ‘Load Default’,

everything changes to the original setting.

This Button opens a program guide “Using Finger Note^TM”

l. Mouse right click menu button

This button works like the right mouse click button such as opening Webster board menu. Once

you click this and click mouse, it works like clicking the right button of your mouse for 5 secs.

After 5 secs, it goes back to normal setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Troubleshooting

8. Contact & Support

Although scrivo.1 is designed to be highly reliable, you may occasionally experience a problem.

The following will help you to identify the cause of possible problems and suggest solutions for