Revision
User’s Manual for PLANET SIP IP Phone:
Model: VIP-155PT
Rev: 1.0 (October, 2006)
Part No. EM-VIP155PTV1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Overview............................................................................................................................6
Package Content ...............................................................................................................7
Physical Details .................................................................................................................8
Front View and Keypad function................................................................................8
Rear View .................................................................................................................10
Physical Installation Requirement................................................................................ 11
LAN/WAN Interface quick configurations...............................................................12
Overview on the web interface of VIP-155PT .........................................................15
Manipulation of VIP-155PT via web browser..........................................................15
Current State.............................................................................................................16
WAN Config:............................................................................................................17
LAN Config..............................................................................................................18
SIP Config ................................................................................................................18
DHCP Server ............................................................................................................20
NAT ..........................................................................................................................21
Net Service ...............................................................................................................22
Firewall settings........................................................................................................22
QoS settings..............................................................................................................24
Advance SIP settings................................................................................................24
Digital Map...............................................................................................................26
Call Service Settings.................................................................................................27
Voice Record.............................................................................................................29
MMI Filter................................................................................................................30
Audio Settings ..........................................................................................................30
Dial-Peer Settings.....................................................................................................31
Config Manage .........................................................................................................33
WEB Update.............................................................................................................33
FTP/TFTP Update ....................................................................................................34
Account Manage.......................................................................................................35
Phone Book ..............................................................................................................36
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Syslog Config ...........................................................................................................36
Time Set....................................................................................................................36
Reboot.......................................................................................................................37
Keypad Function ............................................................................................................38
Keypad Menu ...........................................................................................................39
Introduce .........................................................................................................................42
Basic Structure..........................................................................................................42
Basic command ........................................................................................................42
Global Command............................................................................................................43
Tree Structure .................................................................................................................43
account......................................................................................................................43
config........................................................................................................................43
Debug (Level 0~7)....................................................................................................49
Download configure to flash ....................................................................................50
Password...................................................................................................................50
Reload.......................................................................................................................50
Show system running info........................................................................................50
Telnet and logout ......................................................................................................53
Telnet and logout ......................................................................................................54
Tracert trace network path info.................................................................................54
Update IP Phone .......................................................................................................54
Upload configure file................................................................................................54
Network Diagnosis..........................................................................................................54
Reset to factory default ..................................................................................................55
POTS Mode (Safe mode)................................................................................................55
Appendix A........................................................................................... 56
FAQ ..................................................................................................................................56
Voice communications....................................................................................................57
Peer to Peer (P2P) Mode ..........................................................................................57
Proxy Mode ..............................................................................................................58
VIP-155PT series Specifications..............................................................................61
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Chapter 1
Introduction
Overview
Meeting the next-generation Internet telephony service demands, PLANET Technology provides
feature-rich, toll-quality Internet telephony service solutions. The 802.3af Power over Ethernet (PoE) IP
Phone －VIP-155PT brings cost-effective solution for voice communications and interoperates VoIP
hardware and systems from major third party vendors with traditions of PLANET VoIP family. As a
feature-rich IP Phone, the VIP-155PT fulfills your needs. The VIP-155PT is SIP 2.0 (RFC3261)
compliant with SIP digest authentication supports. And the VIP-155PT is the cost-effective SIP PoE IP
Phone.
The VIP-155PT feature high-quality speakerphone technology; also include an easy-to-use speaker
on/off button and call hold/transfer buttons for various voice services. These features go beyond the
conventional voice systems nowadays, and the PoE IP phones are cost-effective solution for Internet
Telephony Service Provider (ITSPs) communications and interoperate VoIP hardware and systems
form othe major third party vendors with the traditions of PLANET VoIP family.
As feature-rich IP Phones, the VIP-155PT fulfill your needs. They are simple to use, and have
additional features such as built-in PPPoE/DHCP clients, password-protected machine management,
large LCD menu display, hands-free speakerphone, last number redial, incoming message indicator,
and user-intuitive web administration system.
The VIP-155PT are self-contained, service-integrated IP phones — offers intelligent phone features,
and powerful voice processing power. The VIP-155PT can effortlessly deliver toll voice quality
equivalent to the regular PSTN connections utilizing cutting-edge Quality of Service, echo cancellation,
comfort noise generation and voice compensation technology. Meanwhile, the dual Ethernet interfaces
on the VIP-155PT allow users to install in an existing network location without interfering with desktop
PC network connections. The new VIP-155PT deliver more convenience, efficiency, innovation and
benefits of VoIP in your dailylife.
VIP-155PT Functions
•
Simple Installation and administration
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration of the VIP-155PT can be performed in minutes via the keypad, or web interfaces.
Using the built-in LCD display, the VIP-155PT offers user-friendly configuration guidelines,
machine operation status, call status displays, and incoming call identification.
•
Feature-rich keypad IP Phone
The VIP-155PT integrates a high-quality speakerphone with the Call Hold, Forward and Transfer
functions and also provides advanced telephone features, such as 9 speed-dial keys, last number
redial, incoming call history, Auto Answer indicator in a much more convenient and functional
manner than traditional telephone sets.
•
•
Dynamic IP address assignment, and voice communication
The VIP-155PT can act as a PPPoE/DHCP client, automatically obtaining an IP address for
Internet access.
Various field applications compliant
The VIP-155PT is capable of handling both peer-to-peer and SIP proxy registration, authentication
to interact with major SIP gateway/IP Phone in the market. The VIP-155PT offers the most flexibility
and interoperability with PLANET and 3rd party VoIP vendors, allowing the deployment of both
simple and complex VoIP networks such as ITSP, PC-to-Phone/Phone-to-PC or enterprise VoIP
environments.
•
•
Standards compliant
The VIP-155PT complies with SIP 2.0 (RFC3261), interoperates with 3rd party SIP voice
gateways/terminal/software as well as other PLANET VoIP products. Supported Voice codecs and
VoIP technologies are: G.723, G.729ab, G.711u-law/a-law; Voice Activity Detection (VAD), and the
Confort Noise Generation (CNG).
NAT Optimization, Firewall policy packet filtering and QoS mechanism
The VIP-155PT provides user definable policy-based firewall protection, and a packet filtering
mechanism to prevent business or residential network from malicious attacks or intrusion. The
firewall policy offers VoIP administrators access control privilege choices to apply to LAN users to
restrict Internet access or prevent improper use.
Package Content
The contents of your product should contain the following items:
IP Phone
Power adapter
Quick Installation Guide
User’s Manual CD
RJ-45 cable x 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Physical Details
The following figure illustrates the front/rear panel of VIP-155PT.
Front View and Keypad function
Front Panel of VIP-155PT
Keypad Description
Menu and all status shall be displayed for users.
1
2
LCD Display
Speed Dial
No.1~No.9
To make a speed dial call by pressing the speed dial key No.1
~ No.9.
Circularly show phone number, wan ip, registration status,
server ip address, gateway and mask info.
3
4
5
6
Sysinfo
Out call
FWD
Show the outgoing calls history.
To transfer an active call (incoming call answered or outgoing
call accepted) to another IP phone.
After complete dial digits, press this button to make call.
Send
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Press to dial the last dialed number when the IP Phone is
off-hooked.
7
8
Redial
PWR
The green light goes on when power on.
The green light goes on-off when there is an incoming call.
9
Message
The light goes constant on when there have voice message
(Proxy Mode.)
To switch between the usage of the handset and the speaker
devices.
10
11
Handfree
Vol+
To increase the volume of voice when at off-hooked state.
To page up menu when at configuration mode.
Press to mute sounds when at talk mode.
12
13
Mute
To bring out the menu selection while IP Phone is in idle state.
To be used as confirm configuration or enter sub-menu.
Menu/OK
Press to modify the configuration.
14
15
Modify
Exit
To escape to an upper layer menu selection.
To increase the volume of voice when at off-hooked state.
To page up menu when at configuration mode.
To decrease the volume of voice when at off-hooked state.
To page down menu when at configuration mode.
Show the incoming calls history.
16
17
Up
Down
18
19
20
21
In call
Pbook
Record
Hold
Enter the phone book selection.
Enter the Voice Record selection.
To hold the conversation.
To decrease the volume of voice when at off-hooked state.
To page down menu when at configuration mode.
Delete digits when at Calling and Configuration modes.
22
23
Vol-
Del
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear View
Rear Panel of VIP-155PT
RJ-45 connector, to maintain the existing network structure,
1
LAN
connected directly to the PC through straight CAT-5 cable
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
2
3
WAN (PoE)
12V DC
Please connect the WAN interface when using IEEE802.3af
PoE power supply (PT model only)
12V DC Power input outlet
y The Power over Ethernet support on PLANET VIP-155PT
complieswiththe802.3afstandards. Usingnon-802.3af
compliant PoE device will burn up the VIP-155PT
permanently.
L Hint
y Either one power-source is allowed. Please make sure
only one power source is applied to the VIP-155PT.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Chapter 2
Preparations & Installation
Physical Installation Requirement
This chapter illustrates basic installation of VIP-155PT
•
•
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for
WAN port usage)
Administration Interface
PLANET VIP-155PT provides GUI (Web based, Graphical User Interface) for machine management
and administration.
Web configuration access:
To start VIP-155PT web configuration, you must have one of these web browsers installed on
computer for management
•
Netscape Communicator 4.03 or higher
•
Microsoft Internet Explorer 4.01 or higher with Java support
Default LAN interface IP address of VIP-155PT is 192.168.0.1. You may now open your web browser,
and insert 192.168.0.1 in the address bar of your web browser to logon VIP-155PT web configuration
page.
VIP-155PT will prompt for logon username/password, please enter: rootn / null (no password) to
continue machine administration.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please locate your PC in the same network segment
(192.168.0.x) of VIP-155PT. If you’re not familiar with
TCP/IP, please refer to related chapter on user’s manual
CDorconsultyournetworkadministratorforpropernetwork
configurations.
Note
LAN/WAN Interface quick configurations
Nature of PLANET VIP-155PT is an IP Sharing (NAT) device, it comes with two default IP addresses,
and default LAN side IP address is “192.168.0.1”, default WAN side IP address is “172.16.0.1”. You
may use any PC to connect to the LAN port of VIP-155PT to start machine administration.
In general cases, the LAN IP address is the default gateway
L Hint
of LAN side workstations for Internet access, and the WAN
IP of VIP-155PT are the IP address for remote calling party
to connect with.
LAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 192.168.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: root / null), browse to “Network” --> “LAN
Config” configuration menu:
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Parameter Description
Enable this option to switch to bridge mode. VIP-155PT
won’t assign IP for its LAN port in bridge mode and its LAN
and WAN port will be in the same network.
Bridge Mode
LAN IP address of VIP-155PT
Default: 192.168.0.1
IP address
LAN IP address of VIP-155PT
Default: 255.255.255.0
Subnet Mask
DHCP Service
NAT
Enable DHCP service in LAN port
Enable NAT function. If Bridge mode is enable, this
function will be disabled.
It is suggested to keep the DHCP server related parameters
in default state to keep machine in best performance.
L Hint
After confirming the modification you’ve done, Please click on the Apply button to macke the changes
effective, browse to “Config Manager” --> “Save Config” configuration menu and click “Save” button
to save configuration.
Then browse to “System Manage” --> “Reboot” configuration menu and click “Reboot” button to save
configuration.
WAN IP address configuration via web configuration interface
Execute your web browser, and insert the IP address (default: 172.16.0.1) of VIP in the adddress bar.
After logging on machine with username/password (default: root / null), browse to “Network” --> “WAN
Config” configuration menu, you will see the configuration screen below:
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Type
Static IP
Data required.
The ISP will assign IP Address, and related information.
Get WAN IP Address automatically; it is no need to
configure the DHCP settings.
DHCP
The ISP will assign PPPoE username / password for
Internet access,
PPPoE
PleaseconsultyourISPpersonneltoobtainproperPPPoE/IP
address related information, and input carefully.
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.
L Hint
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Chapter 3
Web Configurations
Configuring and monitoring your VIP-155PT from web browser
The VIP-155PT integrates a web-based graphical user interface that can cover most configurations
and machine status monitoring. Via standard, web browser, you can configure and check machine
status from anywhere around the world.
Overview on the web interface of VIP-155PT
With web graphical user interface, you may have:
Š More comprehensive setting feels than traditional command line interface.
Š Provides user input data fields, check boxes, and for changing machine configuration settings
Š Displays machine running configuration
To start VIP-155PT web configuration, you must have one of these web browsers installed on computer
for management
Š Netscape Communicator 4.03 or higher
Š Microsoft Internet Explorer 4.01 or higher with Java support
Manipulation of VIP-155PT via web browser
Log on VIP-155PT via web browser
After TCP/IP configurations on your PC, you may now open your web browser, and input
http://192.168.0.1 to logon VoIP gateway web configuration page.
Browse any configuration menu, VIP-155PT will prompt for logon username/password, there are two
level accounts for manage:
Account Name
root
Password
Level Description
null (no password)
Administrator user, can mansge all of
configuration.
General user, just can manage part of
configuration.
guest
guest
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VIP-155PT main page
Current State
Current state information
Shows the WAN and LAN port connecting state and
current settings
Network
Part show the working state of VoIP, you can see whether
IP Phone has registered the public sip server
Shows the public sip and private sip phone numbers
VOIP
Phone Number
16
Download from Www.Somanuals.com. All Manuals Search And Download.
WAN Config:
Three methods are available for Internet Access
Static IP
If you are a leased line user with a fixed IP address, fill out
the following items with the information provided by your
ISP.
Fixed IP User
check with your ISP provider
check with your ISP provider
IP Address
Netmask
check with your ISP provider
Default Gateway
DHCP IP
If there is DHCP server in your local network, VIP-155PT
will automatically obtain WAN port network information
from your DHCP server.
Dynmaic IP User
PPPoE
VIP-155PT will automatically obtain WAN port network
information from your ITSP if PPPoE setting and the setup
are correct.
PPPoE User
Enter User Name provided by your ISP
Enter Password provided by your ISP
Enter Password to confirm again
PPPoE Server
Uasename
Password
17
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN Config
Field
Description
Enable this option to switch to bridge mode. IP phone won’t
assign IP for its LAN port in bridge mode and its LAN and
WAN port will be in the same network
Bridge Mode
(This setting won’t take effect unless you save the config
and reboot the device)
LAN IP address of VIP-155PT
Default: 192.168.0.1
IP address
LAN IP address of VIP-155PT
Default: 255.255.255.0
Subnet Mask
DHCP Service
NAT
Enable DHCP service in LAN port
Enable NAT
SIP Config
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting page of public SIP server.
Field
Description
Register address of public SIP server
Register Server Addr
Register Server Port
Register port of public SIP server
Username of your SIP account (Always the same as the phone
number)
Register Username
Register Password
Password of your SIP account
IP address of proxy SIP server (SIP provider always use the
same IP for register server and proxy server, in this case you
don’t need to configure the proxy server information)
Signal port of SIP proxy
Proxy Server Addr
Proxy Server Port
Proxy Username
Proxy Password
Proxy server username
Proxy server password
SIP domain, enter the sip domain if any, otherwise IP PHONE will
use the proxy server address as sip domain
Local SIP register port, default 5060
Domain Realm
Local SIP port
Phone Number
Phone number of your SIP account
Register expire time, default is 600 seconds. IP PHONE will auto
configure this expire time to the server recommended setting if it
is different from the SIP server
Register Expire Time
Co-work with the Auto Detect Server, if Auto Detect Server is
enable, IP PHONE will periodically detect if the SIP server is
available according this setting
Detect Interval Time
User Agent
It will show IP Phone’s information on Proxy Server
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DTMF signal sending mode: support RFC2833, DTMF_RELAY
(inband audio) and SIP info
DTMF Mode
Server Type
It could support different SIP Proxy providers
Current IP PHONE SIP version. Set to RFC 2543 if the gate need
to communicate to devices (such as CISCO5300) using the SIP
1.0. Default is RFC 3261
RFC Protocol Edition
Co-work with Server Auto Swap and Detect Interval Time. Enable
this option, IP PHONE will periodically detect whether the public
SIP server is available, if the server is unavailable, the IP PHONE
will switch to the back-up SIP sever, and continue detecting the
public sip server. IP PHONE will switch back to the primary SIP
server if the server is available again
Auto Detect server
Enable Register
Enable/Disable SIP register. IP PHONE won’t sent register info to
SIP server if disable register
Enable/Disable Outbound Proxy
Enable Pub Outbound
Proxy
DHCP Server
DHCP server manage page.
User may trace and modify DHCP server information in this page
Field
Description
Enable DNS relay function
Lease table name
DNS Relay
Lease Table Name
Lease Time
DHCP server lease time
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Start IP of lease table
Start IP
End IP
End IP of lease table. Network device connecting to the IP PHONE
LAN port can dynamic obtain the IP in the range between start IP
and end IP
Netmask of lease table
Netmask
Gateway
DNS
Default gateway of lease table
Default DNS server of lease table
Notice: This setting won’t take effect unless you save the config and reboot the device
NAT
Advance NAT setting. Maximum 10 items for TCP and UDP port mapping.
Field
Description
Enable/Disable IPSec ALG
Enable/Disable FTP ALG
Enable/Disable PPTP ALG
Transfer type using port mappin
IPSec ALG
FTP ALG
PPTP ALG
Transfer Type
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LAN device IP for port mapping
LAN device port for port mapping
WAN port for port mapping
Inside IP
Inside Port
Outside Port
Click Add to add new port mapping item and Delete to delete current port mapping item.
Net Service
Field
Description
Configure HTTP transfer port, default is 80.User may change this
port to enhance system’s security. When this port is changed,
Configure telnet transfer port, default is 23
RTP initial port
HTTP Port
Telnet Port
RTP Initial Port
RTP Port Quantity
Maximum RTP port quantity, default is 200
Notice: Settings in this page won’t take effect unless save and reboot the device.
If you need to change telnet port or HTTP port, please use the port greater than 1024, because
ports under 1024 is system remain ports.
HTTP service if HTTP is set to 0.
Firewall settings
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Firewall setting page. User may set up firewall to prevent unauthorized Internet users from accessing
private networks connected to the Internet (input rule), or prevent unauthorized private network
devices to access the internet.
Access list support two type limits: input_access limit or output_access limit. Each type support 10
items maximum.
IP PHONE firewall filter is base WAN port. So the source address or input destination address should
be WAN port IP address.
Field
Description
Enable in_access rule
in_access enable
out_access enable
Input/Output
Deny/Permit
Protocol Type
Port Range
Enable out_access rule
Specify current adding rule is input rule or output rule
Specify current adding rule is deny rule or permit rule
Protocol using in this rule: TCP/IP/ICMP/UDP
Port range if this rule
source address. Can be single IP address or network address
Src Addr
23
Download from Www.Somanuals.com. All Manuals Search And Download.
destination address. Can be IP address or network address
source address mask. Indicate the source is dedicate IP if set to
255.255.255.255. Otherwise is network ID
Dest Addr
Src Mask
Destination address mask. Indicate the source is dedicate IP if set
to 255.255.255.255. Otherwise is network ID
Des Mask
QoS settings
IP PHONE IP phone implement QoS based on 802.1p, The QoS is used to mark the network
communication priority in the data link/MAC sub-layer. IP Phone will sorted the packets using the QoS
and sends it to the destination.
Field
Description
If enable the VLAN service, the second layer will realize separate
voice, signal and data transmission. To realize separate voice and
data transmission by dispose for IP precedence of ToS area of voice
transmission. To reach upper layer switch or router have priority to
transfer voice transmission. (The prerequisite is the upper layer
swirch or router have to identify ToS area.)
VLAN Enable
Dispose VLAN ID is add a Tag header after realize enable the VLAN
function. The realized voice packets transfer at the same VLAN. The
prerequisite is it must the same as VLAN of upper switch. The value
range are 1~4094.
VLAN ID
If enable the VLAN service, it indicates use DSCP mode to realize
three layers QoS. This moment, the DSCP of SIP signals which
between IP Phone and MGC. It will use Class Selector 5 (The value is
0xA0). And the DSCP of mediums information (In RTP packets) would
be used the values of DiffServ Value field.
DiffServ Enable
DiffServ Value
The value range are 00 ~ FF. (0x28, 0x30, 0x38, 0x48, 0x50, 0x58,
0x68, 0x70, 0x78, 0x88, 0x90, 0x98, 0xb8)
Advance SIP settings
24
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is used to set the private sip server, stun server, and back up sip server information.
STUN Server setting:
Field
Description
Configure stun server address
Configure stun server port default 3478
Stun detect NAT type circle, unit: minute
Enable/disable stun
STUN Server Addr
STUN Server Port
STUN Effect Time
Enable SIP STUN
Public Alter Register:
Public Alter server provide redundancy for the public server, if the public server is unavailable, IP
PHONE will use the alter server, and switch back to the public server when it is available. Account
setting in public alter setting should be the same as the public server.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
User can register two sip servers:
Public sip server and private sip server.these two sip servers are independent from each other
and running in the same time.
For how to configure private sip server. Please refer to SIP_Config
Digital Map
Digit map is a set of rules to determine when the user has finished dialing.
IP Phone support below digital map:
Digital Map is based on some rules to judge when user end their dialing and send the number to the
26
Download from Www.Somanuals.com. All Manuals Search And Download.
server.
VIP-155PT support following digital map:
Field
Description
Use # as the end of dialing
End With “#”
Fixed Length
When the length of the dialing match, the call will be sent
Specify the timeout of the last dial digit. The call will be sent after
timeout
Timeout
User Define digital map:
Field
Description
Represents the range of digit, can be a range such as [1-4], or use comma such
as [1,3,5], or use a list such as [234]
[ ]
Represents any one digit between 0~9
x
Represents the last digit timeout. n represents the time from 0~9 second, it is
necessary. Tn must be the last two digit in the entry. If Tn is not included in the
entry, we use T0 as default, it means system will sent the number immediately if
the number matches the entry.
Tn
Example:
Field
Description
All number from 1000 to 89999 will be sent immediately
8 digits numbers begin with 9 will be sent immediately
Number 911 will be sent will be immediately
3 digits numbers begin with 99 with be sent after four seconds
[1-8]xxx
9xxxxxxx
911
99xT4
Call Service Settings
27
Download from Www.Somanuals.com. All Manuals Search And Download.
User configure the value add service such as hotline, call forward, call transfer, 3-way conference
call .etc in this page
Field
Description
Configure hotline number. IP PHONE immediately dials this
number after hook-off if it is set
Hotline
Forward when busy: select Busy in the Call Forward Field, and
Key in the destination phone number in the Forward Number. If
some one calls you when you having a call, the caller will be
forwarded to the destination number.
Forward no answer: Select No Answer in the Call Forward Field,
and Key in the destination phone number in the Forward Number,
fill the time in the No Answer Time. If some one calls you and no
one answer the caller during the No Answer Time, the call will be
forward to the destination number.
Call Forward
Forward Always: Select Always in the Call Forward Field, and
Key in the destination phone number in the Forward Number,
then any one call this gateway will be forward to the destination
number.
DND, do not disturb, enable this option to refuse any calls
No Disturb
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Enable this to ban outgoing calls
Ban Outgoing
Check the Enable Call Transfer.
Unattended transfer: If A is the IP PHONE user, and B calls and
talking with A through VoIP. A can press FWD button to hold the
call with B, and then enter C’s number. B will be transferred to C
and can talk with C.
Enable Call Transfer
Attended transfer: If A is the IP PHONE user, and B calls and
talking with A through VoIP. A can press Hold button to hold the
call with B, and then enter C’s number to talk will C. and press
Hold to switch back to A, and then press FWD key , B will be
transferred to C and can talk with C.
Enable/disable Call Waiting
Enable Call Waiting
Check Enable Three Way Call
Assume A is the VIP-155PT user, and B calls and talking with A
through VoIP. A can press FWD button to hold the call with B,
then enter * and then enter C’s number to talk with C, and then
press * button again to make 3-way conference calls.
If this option is disable, IP PHONE refuse the incoming call when
the called number is different from IP PHONE’s phone number.
Enable/disable auto answer function
Enable Three Way
Call
Accept Any Call
Auto Answer
Enable/disable answering machine function. Please refer to the
bwloe descriptions for detail.
Enable Voice Record
Use customized greeting message
User-defined Voice
Incoming Record
Playing
Simultaneously play the message when recording
No answer call forward time setting
No Answer Time
Black List
Incoming call in these phone numbers will be refused
Outgoing calls with these phone numbers will be refused
Limit List
Voice Record
VIP-155PT provides record function. With this function, user may record three VoIP message and one
local message.
Field
Description
Select “Enable Voice Record” to active answering
machine, and config No Answer Time. If there is an
incoming call and no one answer the call. After timeout, IP
PHONE will auto answer this call and ask the caller to leave
message.
Enable Voice Record
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Play the message when recording
Incoming Record Playing
User-Defined Voice
Use customizes greeting voice for answering machine
Record local message:
User may use local message to leave message to other local users.
Please refer the Record button function as below:
Record Function
Level1
Level2
New
Description
Received
New message info
Old
Old message info
Record
Playing
Play
Enable/disable answering machine
Enable/disable Incoming Record Playing
Play local message
Local
Rec
Record local message
User define
Switch
Play
Enable/disable customize greeting message
Play customize greeting message
Record customize greeting message
Rec
MMI Filter
MMI filter is used to make access limit to IP PHONE IP phone.
When MMI filter is enable. Only IP address within the start IP and end IP can access IP PHONE IP
phone.
Audio Settings
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Field
Description
select the prefer CODEC; support ulaw, alaw,G729 and G7231
5.3/6.3
CODEC
Signal standard for different area
Handset in volume
Signal Standard
Input Volume
Handset out volume
Output Volume
Handfree Volume
Handdown Time
G729 Payload Length
VAD
Hand free volume
hand down detect time
G729 payload length
Enable/disable Voice Activity Detection
Dial-Peer Settings
VIP-155PT provide flexible dial rule, with different dial-rule configure, user can easily implement the
following function:
----Replace, delete or add prefix of the dial number.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
----Make direct IP to IP call
----Place the call to different servers according the prefix.
You can click “Add” to add a new dial rule. Below is the detail setting of the dial-rule:
Field
Description
The Number suit for this dial rule, can be set as full match or prefix
match. Full match means that if the number user dialed is completely
the same as this number, the call will use this dial-rule. Prefix match
means that if prefix of the number that the user dials is the same as
the prefix, the call will use this dial-rule, to distinguish from the full
match case, you need to add “T” after the prefix number in the phone
number setting
Phone Number
call destination, can be IP or domain. Default is 0.0.0.0, in this case
the call will be routed to the Public SIP server. If you set the
destination to 255.255.255.255, then the call will be routed to the
private SIP server. Also you can key other address here to make
direct IP calls
Destination
(optional)
Configure the port of the destination, default is 5060 in SIP and 1720
for H323
Port (optional)
Set up the Alias. We support four Alias as below. Alias need to
co-work with the Del Length:
¾ add:xxx, add prefix to the phone number, can set to reduce the dial
length.
¾ all: xxx, replace the phone number with the xxx, can use as speed
dial function.
Alias (optional)
¾ del, delete the first N numbers. N is set in the Del Length
rep:xxx，replace the first N numbers. N is set in the Del Length. For
Example: Use wants to place a call 8610-62281493, then you can set
the phone number in the dial rule as 010T, and set the Alias as
rep:8610, and set the Del Length to 3. Then all calls begin with 010
will be changed to 8610 xxxxxxxx.
Configure suffix, show no suffix if not set
Suffix (optional)
Example:
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Field
Description
If the call starts with 2, the first 2 will be deleted, and the rest number will be
sent to private SIP server.
2T rule
If the call starts with 3, the first 3 will be deleted, and the rest number with be
sent to public SIP server.
3T rule
123 rule
0T rule
179 rule
Dial 123 and will send 8675583018049 to your server. Used as speed dial
function
If the calls is begin with 0, the first 0 will be replace by 86. Means that if you
dial 075583018049 and AG-188 will send 8675583018049 to your server.
When you dial 179 , the call with send to 192.168.1.179, suit for LAN
application without set up a sip server.
Config Manage
Field
Description
Save Config
Clear Config
Save current settings
Restore to default settings
Notice: clear config in admin mode, all settings restores to factory default; clear config in guest
modem, all settings except sip and advance sip restore to factory default.
WEB Update
Update IP phone’s settings or firmware. Firmware file is .z extension when configure file is .cfg
extension, IP PHONE will auto select configure update or firmware update according the extension.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP/TFTP Update
Backup:
Back up configure file to your FTP/TFTP server.
* configure use .cfg extension.
Auto update:
IP PHONE IP phone support FTP and TFTP auto update. The gateway will auto obtain the configure file
from your update server if configured. To obtain the original configure file, you can use the FTP/TFTP
back up as describe above. Configure file using module structure, user may remain the concerned
modules and remove other modules. Put the configure file in the root directory of update serve when
finish editing.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Configure file version was in the <<VOIP CONFIG FILE>> and <GLOBLE CONFIG MODULE>
ConfFile Version
Example:
Gateway original version is:
<<VOIP CONFIG FILE>>Version:1.0000
<GLOBLE CONFIG MODULE> ConfFile Version：6
User may edit the configure file version to:
<<VOIP CONFIG FILE>>Version:1.0007
<GLOBLE CONFIG MODULE> ConfFile Version：7
Account Manage
Set web access account or keypad password of IP PHONE.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Book
User may set contacts in this page, and the contacts will be saved in the memory. Then using the
Pbook, Vol+,Vol-,Menu/OK and Exit keys to choose your friend in the contacts and then press # to call
out.
Syslog Config
Field
Description
Enable syslog function.
Enable Syslog
VIP-155PT will automatic send the system logs to define server. Fill in
the server IP address.
Server IP
Fill in the transmission port.
Server Port
Time Set
VIP-155PT could support SNTP timeset, type in SNTP Server address, Timezone and timeout fileds.
And click “select sntp” to enable SNTP function.
If hasn’t click “select sntp”, it also could set up time by manual.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Chapter 4
Keypad Configurations
Keypad Function
User can configure IP PHONE through its keypad. List below is the keypad function
Keypad
Mode
Function/Display
Idle mode
Sysinfo
----
show current time
Idle mode
circularly show phone number,wan ip, gateway info
Menu/OK
Idle mode
enter config mode, default password 123
config mode
config mode
confirm or enter sub-menu
exit
Exit
Up
Calling mode
config mode
Calling mode
config mode
Calling mode
config mode
Calling mode
volume up (Max:9)
Page up
Down
Del
volume down (Min:1)
Page down
Delete digits
Delete digits
Mute
Mute
Out call
Idle mode
Outgoing call menu
In call
Idle mode
Idle mode
Incoming call menu
Record
Enter record menu, usage refer FAQ
Pbook
Handfree
0－9
Idle mode
Enter Phone book set up
Handfree
Calling mode
Calling mode
config mode
Digits 0~9
Hit quickly to switch between numeric or alphabetic
*
Calling mode
config mode
Use in 3-way conference call.
Use as “.” In the ip address setting
38
Download from Www.Somanuals.com. All Manuals Search And Download.
#
Calling mode
Calling mode
Calling mode
Calling mode
Calling mode
Idle mode
Use as end key of dialing or the dial number
Hold, detail refer value add service
Transfer, detail refer value add service
Redial key
Hold
FWD
Redial
Send
No.1~No.9
call key
Speed dial key
Keypad Menu
User may use SET, Menu/ok, Exit, Vol+, Vol- to config IP PHONE detail setting. Press Menu/ok to
enter config mode, and the default password is 123.
Below list the keypad menu of IP PHONE
IP PHONE Keypad Menu
Level 1
Network
Level 2
Level 3
Level 4
LAN
IP
Netmask
DHCP Server
NAT
Switch
FTPalg
IPSec alg
PPTPalg
Bridge Mode
Status
WAN
Static Net
1. IP
2. NetMask
3. Gateway
4. DNS
5. DNS2
User name
Password
PPPoE
QoS
Call Feature
Phone-number
Limit-List
Public SIP
Private SIP
Current
ADD
DEL
Black-List
Current
ADD
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DEL
FastCall
Three Call
Call-Transfer
Call-Waiting
Call-Forward
Condition
SIP
Transfer Num
Transfer IP
Port
Dial-Rule
End With #
Fixed Length
Switch
Length
SIP
Reg Status
Reg Switch
Server
Public Reg
Private Reg
Public
Private
Private
Register
Proxy
Domain
Public
Private
Public
Private
User Agent
Detect-server
Dtmf-mode
Interval-time
Swap-server
RFC-version
Signal-Port
Stun
Switch
Addr
Port
Effect Time
DSP
Codec
Handdown-time
Dtmf-Volume
Input-volume
Output-Volume
Save
System
Reboot
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Default
Syslog
Other Setting
Switch
Server-IP
Server-Port
41
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Chapter 5
Telnet Console
Introduce
Basic Structure
User may use telnet command to access and manage IP phone.
IP PHONE adopts tree structure for telnet. Every node contains its sub-nodes or local command. User
can type “help” or “?” whenever to see sub-nodes and all local command under current node.
Besides local command, there are some global commands can be used in each node.
Basic command
Logout: exit telnet mode.
Write: save current settings.
Type sub-nodes name in current node to switch to sub-node.
Type “!” or “exit” in current node to return to parent-node.
Type “help” or “?” can see all sub-nodes and all local command under current node,
every help item has comments such as <command> or <node> to distinguish
sub-nodes and local command. Type “help” or “?” in command can see all parameters
using in this command.
When typing node name or command, user no need to key the full name, use TAB
button will make it more efficient.
There are two types in command parameters: optional and required. “required”
parameter use “-” as prefix and “optional” use “_” as prefix. User may type “-” or “_”
then press TAB button for complementarily.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Global Command
Global command is available under all nodes, IP PHONE support following commands:
Command
chinese
clear
Function
Example
#chinese
#clear
Set to Chinese UI
Clear telnet screen
english
exit
Set to English UI
#english
#exit
Return to parent-node
1． Show help info
help
1．#help ping
2．#help
#history
2． Show sub-nodes and local command
Show command history
Exit
history
logout
ping
#logout
Ping command, use to check network,
Print tree structure of current command
Show current user
#tree
tree
who
#who
write
Save setting to flash
#write
Tree Structure
account
path:
<account>#
[stop]start Syslog
---syslog [no] start
Configure Syslog server address and port
---syslog server –ip x.x.x.x _port xxx
Example: #<config-account-syslog>#server
Show syslog settings
---ip 202.112.20.10
---syslog show
---show
Show all account settings
config
¾
accesslist firewall config
path:
<config-accesslist>#
add firewall rule
---entry –I/O xxx –P/D xxx –proto xxx –srcaddr
x.x.x.x –srcmask x.x.x.x–desaddr x.x.x.x –desmask x.x.x.x –portrange xxx –portnum xxx
Example:<config-accesslist>#entry –I/O input –P/D deny –proto udp –straddr 202.112.10.1 –srcmask
255.255.255.0 –desaddr 210.25.132.1 –desmask 255.255.255.0 –portrange neq –portnum 5060
43
Download from Www.Somanuals.com. All Manuals Search And Download.
delete firewall rule
---no entry –I/O xxx –index xxx
Example :<config-accesslist>#no entry –I/O input –index 1
Show firewall settings
---show
[disable] enable input filter
[disable] enable output filter
---[no]in-access
---[no]out-access
¾
DHCP
path: <config-dhcp>#
add DHCP rule
---entry –name xxx –startip x.x.x.x –endip
x.x.x.x –netmask x.x.x.x –gateway x.x.x.x –dnsserver x.x.x.x _time xxx
Example:<config-dhcp>#entry –name lan2004 –startip 192.168.1.2 –endip 192.168.1.254 –netmask
255.255.255.0 –gateway 192.168.1.1 –dnsserver 192.168.10.18
delete DHCP rule
---no entry –name xxx
Example: <config-dhcp>#no entry –name lan2004
Show DHCP settings
---show
[disable]enable DNS-relay
---[no]dns-relay
¾
dialrule
path: <config-dialrule>#
[disable] enable End with #
Set end with fix length
Disable end with fix length
Set timeout to send
---[no]endchar
---fixlen xxx
---no fixlen
---timeout-send xxx
---no timeout-send
---entry –prefix xxx –length xxx
Disable timeout to send
Add digital map
Example: <config-dialrule>#entry –prefix 010 –length 11
Delete digital map rule
---no entry –prefix xxx
Example: <config-dialrule>#no entry –prefix 010
Show current digital map
---show
¾
LAN interface settings
path: <config-interface-fastethernet-lan>#
[disable]enable bridge mode
[disable]enable DHCP service
[disable]enable NAT
---[no]bridgemode
---[no]dhcp-server
---[no]nat
Show current DHCP rules
---dhcpshow
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Show LAN port IP address
Show NAT info
---ipshow
---natshow
Change LAN port IP address
---ip –addr x.x.x.x –mask x.x.x.x
Example:<config-interface-fastethernet-lan>#ip –addr 192.168.1.10 –mask 255.255.255.0
¾
WAN interface settings
path: <config-interface-fastethernet-wan>#
[disable]enable dhcp client
[disable]enable pppoe
---[no]dhcp
---[no]pppoe
[disable]enable QOS
---[no]qos
Set default gateway IP
---gateway x.x.x.x
---no gateway
Clear default gateway IP
Set WAN port IP address
---ip –address x.x.x.x -mask x.x.x.x
Example:<config-interface-fastethernet-wan>#ip –addr 202.112.241.100 –mask 255.255.255.0
You need to reconnect if the WAN port has been changed.
Show WAN port settings
---show
¾
MMI Filter
path: <config-mmifilter>#
add filter rule
---entry –start x.x.x.x –end x.x.x.x
Example:<config-mmifilter>#entry –start 202.112.20.1 –end 202.112.20.255
Delete filter rule ---no entry –start x.x.x.x
Example:<config-mmifilter>#no entry –start 202.112.20.1
Show filter rule
---show
[disable]enable MMI filter
---[no]start-filter
¾
NAT settings
path: <config-nat>#
[disable]enable ftp alg
[disable]enable ipsec alg
[disable]enable pptp alg
Add TCP mapping rule
---[no]ftpalg
---[no]ipsecalg
---[no]pptpalg
---tcp-entry –ip x.x.x.x –lanport xxx –wanport xxx
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Example:<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000
Delete TCP mapping rule
---no entry –ip x.x.x.x –lanport xxx –wanport xxx
Example:<config-nat>#no tcp-entry –ip 192.168.1.5 –lanport 5060 –wanport 1000
Add UDP mapping rule
Delete UDP mapping rule
Show NAT info
---udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---no udp-entry –ip x.x.x.x –lanport xxx –wanport xxx
---show
¾
Netservice
path: <config-netservice>#
Set DNS address
---dns -ip x.x.x.x _domain xxx
Example:<config-netservice>#dns –ip 202.112.10.36 _domain voip.com
Set alternate DNS address
Set hostname
---alterdns -ip x.x.x.x _domain xxx
---hostname xxx
Set http access port
---http-port xxx
Show http access setting
Set telnet access port
Show telnet access port
Set RTP initial port and quantity
---http-port
---telnet-port xxx
---telnet-port
---media-port –startport xxx –number xxxx
Example:<config-netservice>#media-port –startport 10000 –number 200
Add route rule
---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
Example:Arcihfone<config-netservice>#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask
255.255.255.0
Delete route rule
Show route info
---no route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
---route
---show
Show netservice info
¾
Dial-peer settings
path: <config-pbook>#
[disable]enable calling through GK and proxy
Add number-IP bond entry
---[no]enableGKandProxy
---entry –number xxx –ip x.x.x.x –protocol xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip
Add number-IP bond and add prefix to the dial number
46
Download from Www.Somanuals.com. All Manuals Search And Download.
---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _add 123(dial 100 and
will send 123100 according this rule)
Add number-IP bond and replace the destination with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user dial 100
and gateway will sent 100 instead)
Add number-IP bond and delete the prefix of the destination number
---entry –number xxx –ip x.x.x.x –protocol xxx _del xxx
Example:<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _del 2 (dial 1234 will
send 34 instead)
Add number-IP bond and replace the prefix with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _rep xxx _length xxx
Example:<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _rep 567 _length
2(dial 1234 will send 56734)
Delete dial-peer entry
---no entry –number xxx
---show
Show current dial-peer rules
Set default voip protocol
---default-protocol xxx
¾
Port settings
path: <config-port># 或<config-port X>#
set accecp relay mode
set callerid mode
---accept-relay xxx
---callerid xxx
disable callerid
---no callerid
config call forward ---callforward –conditon xxx –number xxx –ip xxx –port xxx –protocol xxx
Example:<config-port 0>#callforward –condition busy –number 100 –ip 202.112.10.100 -port
5060 –protocol sip
Disable call forward
---no callforward
---[no]calltransfer
---[no]callwaiting
[disable]enable call transfer
[disable]enable call waiting
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Set prefer codec
---codec xxx
Set DTMF gain
---dtmfvolume xxx
---in-limit xxx
---in-limit
Set black list
Show black list
Set input volume
---input xxx
---out-limit xxx
---out-limit
Set outgoing limit list
Show outgoing limit list
Set output volume
---output xxx
---[no]shutdown out
---[no]shutdown in
---[no]shutdown
---[no]threetalk
---show
[disable]enable outgoing limit
[disable]enable black list
[disable]enable outgoing limit and black list
[disable]enable 3-way conference
Show port settings
¾
PPPoE settings
path: <config-pppoe>#
PPPoE account settings
---auth –user xxx -password xxx
Example:<config-pppoe>#auth –user aaa –password 123456
[disable]enable service settings
Show pppoe settings
---[no]service xxx
---show
¾
QOS settings
path: <config-qos>#
[delete]add QoS table entry --- [no]entry –addr x.x.x.x –mask x.x.x.x
Example:<config-qos>#entry –addr 202.112.10.1 –mask 255.255.255.0
[disable]enable include QOS table
Show QoS settings
---[no]include
---show
¾
SIP settings
path: <config-sip>#
[disable]enable registration
[disable]enable auto detect server
Set sip domain
---[no] register
---[no] detect-server
---default-domain xxx
---dtmf-mode xxx
Set DTMF mode
Set auto detect interval time
Set RFC edition
---interval-time xxx
---rfc-version xxx
[disable]enable auto swap server
Set sip account
--- [no]swap-server
---number-password –number xxx –password xxx
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Set local SIP signal port
Set proxy server
--- signalport xxx
---server proxy -ip x.x.x.x _port xxx _user xxx _password xxx
Example:<config-sip-server># proxy ip 210.25.23.22 _port 5060 _user aaa _password 123456
Set register server info
_password xxx
---server register -ip x.x.x.x _port xxx –user xxx
---alter-server proxy –ip x.x.x.x _port xxx _user xxx
---alter-server register –ip x.x.x.x _port xxx _user xxx
Set alter proxy info
_password xxx
Set alter server info
_password xxx
[disable]enable stun server
Set stun detecting interval time
Set stun server ip and port
Show current sip info
---stun [no]enable
---stun interval-time xxx
---stun –ip x.x.x.x –port xxx
---show
¾
User management
path: <config-user>#
Change user right.
---access –user xxx –access xxx
Example:<config-user>#access –user aaa –access 7
Change user password
Add new user
---password –user xxx
---entry –user xxx –access xxx
Example:<config-user>#entry –user abc –access 7
Delete user entry
---no entry –user xxx
Show current sip info
---show
Debug (Level 0~7)
path: <debug>#
show debug setting
---show
[disable]enable debug all modules
[disable]enable debug app module
[disable]enable debug cdr module
[disable]enable debug sip module
[disable]enable debug h323 module
[disable]enable debug tel module
[disable]enable debug dsp module
---[no] all xxx
---[no] app xxx
---[no] cdr xxx
---[no] sip xxx
---[no] h323 xxx
---[no] tel xxx
---[no] dsp xxx
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Download configure to flash
usage: #download tftp –ip x.x.x.x –file xxx
#download ftp –user xxx –password xxx –ip x.x.x.x –file xxx
Example: #download ftp –user abc –password 123 –ip 202.112.20.15 –file AG188.cfg
Password
usage: #password
Enter new password:xxx
Confirm new password:xxx
Reload
usage: #reload
Reboot system
Show system running info
¾
accesslist
path: <show>#
show: accesslist (firewall) settings
Example: #<show>#accesslist
¾
basic
path: <show>#
show network status
Example: #<show>#basic
¾
call
path: <show>#
show current call info
Example: #<show>#call active
¾
capability
path: <show>#
show CODEC capability
Example: #<show>#capability
¾
debugging
50
Download from Www.Somanuals.com. All Manuals Search And Download.
path: <show>#
show debug info
Example:#<show>#debugging
¾
dhcp-server
path: <show>#
show LAN status and DHCP server info
Example:#<show># dhcp-server
¾
dial-rule
path: <show>#
show digital-map info
Example:#<show># dial-rule
¾
interface
path: <show>#
show LAN info
Example:#<show>#interface fastethernet lan
show WAN info
Example:#<show>#interface fastethernet wan
¾
ip
path: <show>#
show arp table info
Example:#<show>#ip arp
Show DNS server info
Example:#<show>#ip dns
Show netstate info
Example:#<show>#ip netstat
Show route info
Example:#<show>#ip route
Show icmp packets Stat.
Example:#<show>#ip icmp
Show igmp packets Stat.
Example:#<show>#ip igmp
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Show ip packets Stat.
Example:#<show>#ip ip
Show RTP packets Stat.
Example:#<show>#ip rtp
Show TCP packets Stat.
Example:#<show>#ip tcp
Show UDP packets Stat.
Example:#<show>#ip udp
¾
memory
path: <show>#
show IP phone memory
Example:#<show>#memory
¾
nat
path: <show>#
show NAT information
Example:#<show>#nat
¾
port
path: <show>#
show caller-ID info
Example:#<show>#port callerID
show dsp info
Example:#<show>#port dsp
show hotline info
Example:#<show>#port hotline
show black list info
Example:#<show>#port in-limit
show outgoing limit info
Example:#<show>#port out-limit
52
Download from Www.Somanuals.com. All Manuals Search And Download.
show current phone number
Example:#<show>#port number
show current port status
Example:#<show>#port status
¾
PPPoE
path: <show>#
show PPPoE info
Example:#<show># pppoe
¾
qos
path: <show>#
show QoS table info
Example:#<show>#qos
¾
sip
path: <show>#
show sip info
Example:#<show>#sip
¾
udptunnel
path: <show>#
show UDP tunnel info
Example:#<show># udptunnel
¾
uptime
path: <show>#
show running time
Example:#<show># uptime
¾
version
path: <show>#
show IP phone version
Example:#<show># version
Telnet and logout
Usage: #telnet –target -port
Login:xxx
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Password:xxx
#
#logout
Telnet and logout
path: <time>#
---manualset –year xxx –month xxx –day xxx –hour xxx –minute xxx –second xxx
Example:<time>#manulset –year 2004 –month 10 –day 1 –hour 8 –minitute 30 –second 0
[disable]enable SNTP server
Set SNTP IP address
Set SNTP server timeout
Set timezone (-12~+12)
Show SNTP info
---sntp [no] start
---sntp server x.x.x.x
---sntp timeout xxx
---sntp zone xxx
---sntp show
Show current time
---print
Tracert trace network path info
usage:
#tracert –host
Update IP Phone
usage:
# update ftp –user xxx –password xxx –ip x.x.x.x –file xxx
# update tftp –ip x.x.x.x –file xxx
Example:# update ftp –user abc –password 123 –ip 202.112.20.15 –file AG188.dlf
Upload configure file
usage:
# upload ftp –user xxx –password xxx –ip x.x.x.x –file xxx
# upload tftp –ip x.x.x.x –file xxx
Network Diagnosis
There are some telnet commands for checking your network. Now Listing below for your information
Command
Function
Example
54
Download from Www.Somanuals.com. All Manuals Search And Download.
ping
Check if the destination is accessible
Show network path info
Show network settings
Show route table
#tracert www.google.com
#show basic
tracert
show basic
show ip route
show ip arp
show ip netstat
telnet
#show ip route
Show arp table
#show ip arp
Netstat programe
#show ip netstat
#telnet 192.168.1.2
Telnet to another device
Reset to factory default
#setdefault clear IP phone settings expect network part
#setdefault all clear all settings.
POTS Mode (Safe mode)
VIP-155PT provide safe mode. When there is booting problem because of setting problem or firmware
problem. User can restore the factory setting or upgrade to a new firmware to solve this problem.
How to enter safe mode?
There will be a schedule bar in the VIP-155PT booting procedure, press # key within the first 5 seconds,
then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode. User may
change the PC’s IP address to 192.168.10.xx and telnet to 192.168.10.1 to access the VIP-155PT in
POST mode.
User can accord the guide in post mode to clear the settings or upgrade the firmware.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
FAQ
Q1: How many servers may VIP-155PT register simultaneously?
A1: VIP-155PT is able to register two SIP servers simultaneously, and redundancy servers.
User can configure the dial peer to route calls between these servers.
Q2: Why the settings vanish after reboot?
A2: Please go to Config ManageÆSave Config to save your setting always.
Q3: How to use speed dial function?
A3: There are 9 speed dial keys in the IP PHONE panel, Usage:
Set speed dial number: press the speed key and enter the speed dial number and then press
Menu/OK key to save the setting.
Pick up the handset and press the speed dial key to dial the pre-define number.
Q4: How to use set the IP type via keypad?
A4: In the idle mode, user may us the keypad to set the IP type as the below procedure:
Keep pressing the button 1 for changing to static mode.
Keep pressing the button 2 for changing to DHCP mode.
Keep pressing the button 3 for changing to PPPoE mode.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Voice communications
There are several ways to make calls to desired destination in IP Phone. In this section, we’ll lead you
step by step to establish your first voice communication via keypad and web browsers operations.
Peer to Peer (P2P) Mode
Step 1: Assuming there are two VIP-155PT in the network the IP address are 172.16.0.1 and
172.16.0.2
VIP-155PT-A
WAN IP Address
(172.16.0.1)
VIP-155T-B
WAN IP Address
(172.16.0.2)
Step 2: Execute your web browser, and insert the IP address (172.16.0.1) of the VIP-155PT-A in the
adddress bar. After log on machine, browse to “Dial-peer” configuration item:
Step 3: Press “Add” button and fill in the below parameter, be sure to click the “Submit” button to apply
settings. Browsing to “Config Manage” Æ “Save Config” configuration item and press “Save” button to
save the configuration.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Pick up handset or press “Handfree” key from keypad of VIP-155PT-A and dial “2#”. Then the
phone of VIP-155PT-B should ring. You can do the same thing to the VIP-155PT-B.
y If the IP address of the remote calling party is known,
you may directly make calls by preset number via its
IP address and end with an “#”.
L Hint
y If the IP phones are installed behind a NAT/firewall/
IP sharing device, please make sure the NAT device
support SIP applications before making calls
Proxy Mode
Number: 100
Number: 200
VIP-155PT-A
WAN IP Address
(172.16.0.1)
VIP-155T-B
WAN IP Address
(172.16.0.2)
SIP-50
WAN IP Address
(172.16.0.10)
SETP 1:
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Please browse machine “VoIP” Æ “SIP Config” menu, and enable the “Enable Register”
check box. Insert IP address of the remote calling party in the “Register Server Addr” field.
Sample configuration screen is shown below:
After these configurations, be sure to click the “Apply” button to apply settings.
SETP 2:
Browsing to “Dial-peer” configuration item, press “Add” button and fill in the below
parameter.
After these configurations, be sure to click the “Apply” button to apply settings.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
SETP 3:
Browsing to “Config Manage” Æ “Save Config” configuration item and press “Save” button
to save the configuration. Browsing to “System Manage” Æ “Reboot” menu and press
“Reboot” button reboot the machine to make the settings effective. After rebooting, the unit
will register to SIP-50, the LCD screen will show below:
VOIP PHONE
SEP 20 13 12:30
SETP 4:
At this moment, you may pick up the handset and dial “200” to connect with extension 200 of
VIP-155PT-B to start the voice communications.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
VIP-155PT series Specifications
Product
Model
Power over Ethernet SIP IP Phone
VIP-155PT
Hardware
WAN
1 x 10/100Mbps RJ-45 port
Power Over Ethernet 802.3af compliant at PT model
1 x 10/100Mbps RJ-45 port
LAN
LCD display
Speaker
2 x 16 characters
8 Ohm/0.2 Watt speaker for speakerphone operation
Protocols and Standard
Standard
SIP 2.0 (RFC3261), SIP digest authentication (MD5)
Voice codec
G.723.1 (6.3k/5.3k), G.729, G.711 (a-law/u-law)
Outbound Proxy, STUN
Voice activity detection (VAD)
Comfort noise generation (CNG)
Dynamic Jitter Buffer
NAT Traversal
Voice Standard
Supplementary services
Immediate (unconditional) call forwarding
Busy call forwarding
No answer calls forwarding
Calls hold/transferring.
Answer Machine
3-Way conference calls
Incoming call
Outgoing call
Missed (not accepted) call history
Voice Record
Call history
Protocols
TCP/IP, UDP/RTP/RTCP, HTTP, ICMP, ARP, DNS, DHCP, NTP/SNTP, FTP,
PPP, PPPoE
Network and Configuration
Access Mode
Static IP, PPPoE, DHCP
Web, Keypad, Telnet
Management
Dimension (W x D x H)
Operating Environment
Power Requirement
200 mm x 184 mm x 60 mm
0~40 degree C, 10~90% humidity
12V DC
(802.3af 48VDC in line power)
CE, FCC Class B
EMC/EMI
61
Download from Www.Somanuals.com. All Manuals Search And Download.
|