Pioneer Home Theater System SD 532HD5 User Manual

PROJECTION MONITOR RECEIVER

SD-582HD5

SD-532HD5

Operating Instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing this PIONEER Projection Monitor

Receiver.

Pleasereadtheprecautionaryinstructionsenclosedwiththese

operating instructions please do so before proceeding.

After learning how to operate the Projection Monitor, be sure

to keep this manual handy for future reference.

WARNING:

TO REDUCE THE RISK OF THE FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO WET LOCATIONS.

CAUTION:

IMPORTANT NOTICE

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS

(POLARIZED) PLUG WITH AN EXTENSION CORD,

RECEPTACLEOROTHEROUTLETUNLESSTHEBLADESCAN

BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

The model number and the serial number of this Projection

Monitor are located on the rear panel.

Please write the serial number on the enclosed warranty card

and keep it in a safe place for future reference.

In this manual, we refer to the 'PROJECTION MONITOR

RECEIVER', as the 'Projection Monitor' or the 'Monitor'.

ATTENTION:

POUR EVITER UNE DECHARGE ELECTRIQUE, NE PAS

UTILISER CETTE PRISE (POLARISEE) AVEC UNE RALLONGE,

UNE PRISE OU UNE AUTRE SORTIE A MOINS QUE LES

LAMES PUISSENT ETRE COMPLETEMENT INTRODUITES ET

NE SOIENT PAS EXPOSEES.

Note on the SPLIT screen and SEARCH screen functions

The SPLIT screen and SEARCH screen functions provided in

this monitor are intended for private viewing only.

Use of the above video processing functions for profitmaking

purpose or for public viewing (clubs, hotels, etc.) without prior

authorization from the transmitter and/or owner of the video

program(s)maybeaninfringementofexistingcopyrightlaws.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's

attention to Article 820-40 of NEC that provides guidelines for

proper grounding and, in particular, specifies that the cable ground

should be connected to the grounding system of the building, as

close to the point of cable entry as practical.

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Thelightningflashwitharrowheadsymbol,within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

CAUTION:

The exclamation point within an equilateral

triangleisintendedtoalerttheusertothepresence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-SER-

VICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

NOTICE ON ADVERSE EFFECTS ON THE TV TUBE

When playing TV games, operating computers or displaying still pictures with your Monitor, be

sure to keep in mind the following points;

1. Select the 'GAME' mode. (Refer to page 46 of the Operating Instructions)

2. Do not use your Monitor for more than two hours.

3. WatchnormalTVbroadcast'sforthreetimeslongerthanthetimeofplayingTVgames,operating

computers or displaying still pictures.

Still patterns can scar the Monitor causing performance damage to the CRT.

Download from Www.Somanuals.com. All Manuals Search And Download.

The following symbols are found in this

manual and on the labels on the product.

They alert the operators and service

personnel of this equipment to potentially

dangerous conditions.

WARNING

This symbol refers to a hazard or unsafe

practice which can result in severe personal

injury or death.

CAUTION

This symbol refers to a hazard or unsafe

practice which can result in personal injury

or property damage.

This symbol indicates an action that is

prohibited.

WARNING

IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS

•

Read all of these instructions.

Keep these instructions for later use.

Follow all warnings and instructions marked on the Monitor.

FOR YOUR PERSONAL SAFETY

This Monitor is equipped with a

polarized alternating current line

plug (a plug having one blade

wider than the other).

This plug will fit into the power

outlet only one way. This is a

safety feature.

If you are unable to insert the plug

fully into the outlet, try reversing

the plug. If the plug should still fail

to fit, contact your electrician to

replace your obsolete outlet. Do

not defeat the safety purpose of

the polarized plug.

Do not attempt to service this

Monitor yourself as opening or

removingcoversmayexposeyou

to dangerous voltage or other

hazards. Refer all servicing to

qualified personnel.

Neverpushtheobjectsofanykind

into this Monitor through cabinet

slots as they may touch

dangerousvoltagepointsorshort

out parts that could result in a fire

orelectricshock. Neverspillliquid

of any kind on the Monitor.

Ifthepowercordorplugbecomes

damaged or frayed, unplug this

Monitor from the wall outlet and

refer to qualified service

personnel for servicing.

If the Monitor has been dropped

orthecabinethasbeendamaged,

unplug this Monitor from the wall

outletandrefertoqualifiedservice

personnel for servicing.

Do not overload wall outlets and

extension cords as this can result

in fire or electrical shock.

If liquid has been spilled into the

Monitor, unplugtheMonitorfrom

the wall outlet and refer servicing

to qualified service personnel.

Do not allow anything to rest on

or roll over the power cord, and

do not place the Monitor where

the power cord maybe subject to

traffic or abuse. This may result

in electrical or fire hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not subject your Monitor to

impactofanykind. Beparticularly

careful not to damage the screen

surface.

11-1. Do not place this Monitor on an

unstable, uneven or an inclined

location. The Monitor may

overturn, causing serious injury

(toaperson), andseriousdamage

to the appliance.

10. Unplug the Monitor from the wall

outlet before cleaning. Do not use

liquid cleaners or spray-type

cleaners. Use a damp cloth for

cleaning.

11-2. Be careful when placing the

Monitor on a cart to move it.

Quick stops, excessive force, and

uneven surfaces may cause the

Monitor and cart to overturn.

PROTECTION AND LOCATION OF YOUR PROJECTION MONITOR RECEIVER

12. • Do not use the Monitor near

water, for example, near a

bathtub, washbowl, kitchen sink,

orlaundrytub, inawetbasement,

or near a swimming pool, etc.

16. If an outside antenna is connected through other

equipment, be sure the antenna system is grounded so

astoprovideprotectionagainstvoltagesurgesandbuilt-

up static charges. In the U. S. A., section 810 of the

National Electrical Code, ANSI/NFPA 70, provides

information on proper grounding of the mast and

supporting structure, grounding of the lead-in wire to

an antenna-discharge unit, size of grounding

conductors, location of antenna-discharge unit,

connection to grounding electrode, and requirements

for the grounding electrode.

• Never expose the Monitor to rain

water.

If the Monitor system has been

exposed to rain or water, unplug

the Monitor from the wall outlet

and refer servicing to qualified

service personnel.

NEC-NATIONAL

ELECTRICAL CODE

13. Chooseaplacewherelight(artificial

or sunlight) does not shine directly

on the screen.

ANTENNA

LEAD IN WIRE

GROUND

CLAMP

14. Avoid dusty places since the

buildupofdustinsidetheMonitor's

chassis may result in the

malfunctioning, when high

humidity persists.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

15. • The Monitor has slots, or

openings in the cabinet for

ventilationpurposestoensurethe

reliable operation of the Monitor,

andtoprotectitfromoverheating.

These openings must not be

blocked or covered.

GROUNDING CLAMPS

FIG. A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

EXAMPLE OF ANTENNA GROUNDING IN

NATIONALELECTRICALCODEINSTRUCTIONS

• Never cover the slots or openings

with cloth or other material.

• Never block the bottom

ventilation slots of the Monitor by

placing it on a bed, sofa, rug, etc.

• Never place the Monitor near or

over a radiator or heat register.

• Never place the Monitor in a built-

in enclosure such as a bookcase,

unless proper ventilation is

provided.

Download from Www.Somanuals.com. All Manuals Search And Download.

17. An outdoor antenna system

should not be located in the

vicinity of overhead power lines/

electric lights or power circuits, or

where it can fall onto such power

lines or circuits. When installing

an outdoor antenna system,

extreme care should be taken to

keep it from touching such power

lines or circuits as contact with

them might be fatal.

18. For added protection during a

lightning storm, or when it is left

unattended and unused for long

periods of time, unplug the

Monitor from the wall outlet and

disconnect the antenna. This will

prevent damage due to lightning

and power-line surges.

OPERATION OF YOUR PROJECTION MONITOR RECEIVER

19. The Monitor should be operated

only from the type of power

source indicated on the marking

label. Ifyouarenotsureofthetype

of power supply at your home,

consultyourdealerorlocalpower

company.

24. It is normal for some Monitor to

make occasional snapping or

popping sounds, particularly

when being turned on or off. If the

snapping or popping is

continuous or frequent, unplug

the Monitor and consult your

dealer or service technician.

20. Ifyouareunabletorestorenormal

operation by following the

detailed procedure in your

operating instructions, unplug it

from the wall outlet and refer to

qualified service personnel for

servicing. Do not adjust other

controls than those described in

FOR SERVICING AND MODIFICATION

25. Do not use attachments not

recommended by the Monitor's

manufacturer as they may result

in the risk of fire, electrical shock

or injury to persons.

this

manual.

Improper

adjustments may result in

damage and will often require

extensive work by a qualified

technician to restore the Monitor

to normal operation.

26. When replacement parts are

required, be sure the service

technicianusesreplacementparts

specifiedbythemanufacturerthat

have the same characteristics as

the original part. Unauthorized

substitutions may result in fire,

electrical shock, or injury.

21. If your Monitor is to remain

unused for a period of time, for

instance, when you go on a

holiday, turn the Monitor 'off' and

unplug it from the wall outlet.

27. Upon completion of any service

or repairs to the Monitor, ask the

service technician to perform

routinesafetycheckstodetermine

that the Monitor is in a safe

operating condition.

IF THE PROJECTION MONITOR RECEIVER

DOES NOT OPERATE PROPERLY

22. Ifyouareunabletorestorenormal

operation by following the

detailed procedure in your

operating instructions, do not

attempt any further adjustment.

Unplug the Monitor and call your

dealer or service technician.

23. Whenever the Monitor is

damaged or fails, or there is a

distinct change in performance,

unplug the Monitor and have it

checked by a professional service

technician.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

INTRODUCTION

HOW TO READ THIS OPERATING INSTRUCTIONS ...................... 8

INSTALLING THE MONITOR ........................................................ 9

BASIC OPERATIONS

BEFORE USE .............................................................................. 10

CONNECTING THE ANTENNA ................................................... 12

CONNECTING VIDEO/AUDIO EQUIPMENT ................................ 14

FRONT PANEL FUNCTIONS ....................................................... 18

REMOTE CONTROL UNIT FUNCTIONS ..................................... 20

TO WATCH TV ............................................................................ 22

CHECKING THE MENU............................................................... 24

AUTO CHANNEL PRESET .......................................................... 26

CONVERGENCE ADJUSTMENT ................................................ 28

BASIC FUNCTIONS

PROGRAM BLOCK (V.CHIP) FUNCTION ..................................... 30

CHANGING PASSWORD ............................................................ 34

CHANGING SCREEN SIZE .......................................................... 36

MULTI-SCREEN FUNCTION ....................................................... 38

CLOSED CAPTION DECODE FUNCTION .................................... 40

CHANGING CHANNEL SET UP .................................................. 41

PICTURE ADJUSTMENTS .......................................................... 46

SOUND ADJUSTMENTS ........................................................... 52

DPO FUNCTION ......................................................................... 56

MULTI-POINT CONVERGENCE ADJUSTMENT .......................... 57

VARIOUS FUNCTIONS

CONNECTING THE SYSTEM REMOTE CONTROL ..................... 59

REMOTE CODE SET UP.............................................................. 60

OTHERS

MENU INDEX ............................................................................. 70

TROUBLESHOOTING ................................................................. 72

SPECIFICATIONS ........................................................................ 74

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO READ THIS OPERATING

INSTRUCTIONS

The following page is an example of the way that basic operating instructions are shown in this manual.

The explanation method varies from page to page.

AUTO CHANNEL PRESET

Explanation of the

function on this

page.

The broadcast frequencies that can be received depend on your area.

Memorize the broadcast stations that can be received in your area in the

preset.

Select TV.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

PressMENUandselect SETUP byusing

the5or∞buttonandthenpressingSET/

ENTER. (Refer to page 24.)

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Select CHANNELSETUP inthesameway.

Operating procedure

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

ENTER

∞

USE:

END: MENU

E X I T

RETURN

The button that is

operated is shown

in dark gray.

VOL

MUTING

Select AUTO CHANNEL PRESET .

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET UP

SOURCE

DTV/SAT

GUIDE

CHANN E L S E T UP

POWER

AU T O CHANN E L PR E S E T

CHANN E L ADD / D E L

SET/

F A VOR I T E CHANN E L

ENTER

DTV/(SAT)

INFO

ENTER

∞

VCR REC

FAVORITE CH

∞

USE:

END: MENU

E X I T

RECEIVER

POWER

INPUT

VOL

Screen during

operation

Select ANTENNA , then select A or B.

SET UP

AU T O CHANN E L PR E S E T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

AN T E NNA : A

T V / C A B L E MOD E :

SET/

C A T V S T D

ENTER

AU T O PR E S E T S T AR T

∞

USE:

END: MENU

E X I T

NOTE:

The CHANNEL SET UP cannot be selected unless the

function is set up for TV.

SET UP

AU T O CHANN E L PR E S E T

AN T E NNA : A

T V / C A B L E MOD E :

C A T V S T D

SET/

ENTER

AU T O PR E S E T S T AR T

∞

USE:

END: MENU

E X I T

Precautions etc.

Buttons operated

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING THE MONITOR

INSTALLATION PRECAUTIONS:

CARE OF YOUR PROJECTION MONITOR

DO NOT:

• Keep away from magnetic fields

• Donotusestrongcleansers, solvents, polishes, orchemically

treated cloths to clean the screen or cabinet.

• Do not touch or scratch the screen.

• Do not fasten or place rubber or vinyl items on the Monitor.

• Do not stick adhesive tape onto the Monitor.

• Do not put any object on the Monitor.

The picture may be distorted if strong magnetic fields are

nearby. Externalspeakersshouldbesetatleast2feet(60cm)

away from the Projection Monitor. Electric fans and other

motor driven appliances and toys may also be sources of

magnetism.

• Bright light or direct sunlight will dull the picture. Position

the Projection Monitor so that the screen faces away from

windows.

• While the Projection Monitor is operating, it is cooled by

airflow through ventilation holes in the rear and bottom.

Therefore, avoid placing it in a location where the cooling

airflow is hindered (e. g. against a wall).

• Avoid places subject to extremely high temperatures or

humidity, or to temperatures of 41°F (5°C) or lower. Also

avoid dusty places.

DO:

• Use a soft cloth to dust the screen and cabinet.

• Handle the screen with care to avoid scratches or damages.

• Ask your dealer or a Pioneer authorized service center to

clean the interior of the monitor in your area if the picture

brightness is too low even with the max. level. This may be

caused by dust buildup inside.

• If setting the Projection Monitor on a floor made of soft

material, make sure that the floor will not damaged by the

weight of the Projection Monitor.

• Do not put the Projection Monitor on a surface that is tilted,

unsteady or prone to shake or vibrate. A shaky or slanted

platform is dangerous.

• Cover shiny surfaces (floor and walls) with non reflective

materials (carpet, rugs, wallpaper, etc.).

OPERATING PRECAUTIONS

Optimum viewing distance

10 to 23 feet is the range recommended for viewing comfort.

Adjust room illumination

Excessively bright or dim lighting may strain your eyes. Draw

the curtains if necessary to shut out direct sunlight.

Condensation and picture blurring

• If the room temperature suddenly rises (or if the Projection

Monitor is moved from a cool place to a hot place),

condensation may form on the lenses resulting in picture

distortion or color fading. If this occurs, simply wait a while

(with the power switch ON) and the condensation will

disappear.

• A gradual change in temperature can prevent condensation

from forming.

Download from Www.Somanuals.com. All Manuals Search And Download.

BEFORE USE

Before you watch the TV, perform the following procedure.

This manual's illustrations shows model SD-582HD5.

UHF

VHF

ConnectthecablesoftheVHFantenna

and UHF antenna to the ANTENNA A

terminal. (See pages 12 and 13)

Mixer

ANTENNA

/CABLE

Connect the CATV converter

to the ANTENNA B terminal.

(See pages 12 and 13)

CATV

converter

Connectthepowercordtothe

AC wall socket.

Red indicator

Turn on the MAIN POWER

switch.

When the MAIN POWER is on, the red STANDBY/

ON indicator lights up. In this state, the POWER

STANDBY/ON button or the POWER button of the

remote control unit can be used to turn on and off

the Monitor.

STANDBY/ON

DPO

MAIN POWER

POWER

Download from Www.Somanuals.com. All Manuals Search And Download.

BEFORE USE

Inserting batteries into the remote control unit

CAUTION

Incorrectuseofbatteriesmayleadtoleakageorrupture.

Always be sure to follow these instructions.

Never mix new and used batteries.

Two DURACELL^®'AA' MN1500 1.5V

ALKALINE dry cell batteries

Batteries of the same size may have different voltages

depending on their type. Do not mix different types of

batteries.

(

Remote control operation range

Battery replacement

Replace the batteries when any of the following phenomena

is observed.

• The transmitting LED does not blink even when the TV

POWER button is pressed.

• The remote control operation range has reduced.

When replacing the batteries, prepare new batteries before

removing the old batteries.

Be sure to close the battery case cover after battery

replacement.

30˚

23 feet (7m)

NOTE:

• Even when batteries are removed, learned commands remain

in memory for about 15 minutes.

• If you remove the batteries, and press a button, the memory is

erased in a few seconds.

• Furniture and other obstacles may block the infrared light

beamsothatitcannotreachthesensorbehindtheProjection

Monitor's screen.

• Performance of the remote control unit is adversely affected

by strong fluorescent light. Keep such lights away from the

screen in particular.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING THE ANTENNA

• A good color picture depends on a good TV signal. So does

good multichannel (stereo program and SAP) sound. Ask

yourdealerforadviceonhowtoinstallyourexternalantenna

to receive the best possible signal.

Connect the TV signal source to your Monitor properly.

Use a 75-ohm coaxial cable with an F-type connector and

connect the cable as shown in the illustration.

• If you subscribe to Cable TV or have a central antenna for

your building, you will not need an external antenna.

Connecting VHF/UHF antenna

ANTENNA

/CABLE

VHF antenna

UHF antenna

U/V mixer

Connecting VHF/UHF antenna with VCR

ANTENNA

/CABLE

Antenna

Splitter

Cable TV

VCR

OUT

VCR

ANTENNA

Connecting the CATV converter

ANTENNA

/CABLE

Cable TV

Splitter

CATV converter

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING THE ANTENNA

Connecting the CATV converter with VCR

ANTENNA

/CABLE

Cable TV

Splitter

CATV converter

VCR

OUT

VCR

ANTENNA

Connecting VHF/UHF antenna and CATV converter

VHF antenna

UHF antenna

ANTENNA

/CABLE

U/V mixer

Cable TV

CATV converter

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING VIDEO/AUDIO

EQUIPMENT

DVD/LD player

VCR

Video movie, etc.

SAT tuner

Digital tuner

• Refer to the instructions of your VCR or DVD/LD player for

the detailed connections.

• Before making or changing connections, set the power

switch to off and unplug the power cord from the AC outlet.

• If both the VIDEO terminal (pin-jack type) and S-VIDEO

terminal are connected, the signals from the S-VIDEO

terminal will have priority.

• OnlytheINPUT1andINPUT2jackscaninputthecomponent

video signal.

• When the component signal and other signals are input to

the INPUT 1 or INPUT 2 jacks, the component signal will be

given priority.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING VIDEO/AUDIO EQUIPMENT

SIGNAL

VCR

DVD/LD player

VCR

OUTPUT

AUDIO

VIDEO

S-VIDEO

SIGNAL

ANTENNA

/CABLE

INPUTS

INPUT 2

INPUT 1

INPUT 3

OUTPUT

SIGNAL

S-VIDEO

VIDEO

MONITOR

S-VIDEO/VIDEO

RGB

(MONO)

INPUT 3

SELECT

AUDIO

COMPONENT

VIDEO

S-VIDEO/VIDEO

RGB

INPUT 3

SELECT

SIGNAL

P^B

CONTROL

RGB

OUT

INPUT 3

INPUT

Rear panel

Use these terminals to input signals from

a DVD player which has component video

output terminals (Y, P^B, PR).

SAT/DTV tuner

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING VIDEO/AUDIO EQUIPMENT

Front panel

S-VIDEO

VIDEO

AUDIO

-R

VIDEO S-VIDEO

(MONO)

OUTPUT

INPUT 4

Video movie/VCR

INPUT jacks

COMPONENT VIDEO INPUT jack

Inputs three signals – Y, PB (CB) and PR (CR) – output from DVD

players and the like.

There are 4 sets of inputs for VCR and DVD/LD players. Use

RCA-type pin plug cords (the same as those used in Hi-Fi

systems) for connections. When the audio source to be

connected is monaural, connect the source to the L-(MONO)

jack.

Input formats in which images can be received.

Horizontal

frequency

Vertical

frequency

Format

480 i

MONITOR OUTPUT jacks

DVD player, etc.

Digital tuner, etc.

15.734 kHz

60 Hz

These are used for connecting the monitor to a VCR for

recording, orforlinkingittoanothermonitor. Thesejacksoutput

the video and audio signals of the source currently selected

by the INPUT SELECTOR. Connect these output jacks to your

VCR's inputs. Connect the VCR's outputs to the monitor's

VIDEO inputs.

1080 i

480 p

33.75 kHz

31.468 kHz

60 Hz

RGB INPUT jack

Inputs five signals – R, G, B, H and V – output from digital

tuners and the like.

S-VIDEO INPUT jacks

• Inputs S-VHS video signals or signals from a DVD/LD player

that has an S-VIDEO output jack.

• WhenthesignalinputfromtheS-VIDEOINPUTjackisoutput

from the MONITOR OUTPUT jack, the output signal will be

a composite of Y and C.

Input format in which images can be received.

Horizontal

frequency

Vertical

frequency

Format

1080 i

Digital tuner

33.75 kHz

60 Hz

NOTES:

• SPLIT screen, FREEZE screen and SEARCH screen functions

cannot be used when 1080i or 480p component signals are input.

• Signals from MONITOR OUTPUT jacks will not be output when

component signals or RGB signals are input.

• The RGB input jack is designed for use in connecting a digital

tuner with RGB signal output, and it should accordingly never

be used for connecting to a personal computer or other device.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING VIDEO/AUDIO EQUIPMENT

ANTENNA

/CABLE

INPUTS

INPUT 2

INPUT 1

INPUT 3

OUTPUT

S-VIDEO

VIDEO

MONITOR

S-VIDEO/VIDEO

INPUT 3

(MONO)

SELECT

RGB

AUDIO

COMPONENT

VIDEO

S-VIDEO/VIDEO

RGB

INPUT 3

SELECT

CONTROL

RGB

OUT

INPUT 3

INPUT

Rear panel

SIGNAL

OUTPUT

AUDIO

RGB

Digital tuner

NOTE:

Setting the INPUT 3 SELECT switch to ‘RGB’ will cause all S-Video

and composite images input from the INPUT 3 jack to be

suppressed. Similarly, setting the INPUT 3 SELECT switch to ‘S-

VIDEO/VIDEO’ will cause all images input from the RGB input jack

to be suppressed.

Download from Www.Somanuals.com. All Manuals Search And Download.

FRONT PANEL FUNCTIONS

A flip-down door conceals the control panel. Push gently and

release, to open the door. To close the door, lift it back up into

place.

1 POWER STANDBY/ON indicator

red: STANDBY

green: ON

NOTE:

2 DPO sensor

Sensor to detect the room brightness.

If you accidentally pull the door, it may not shut properly. Push

the door back in to shut it.

3 MAIN POWER switch

Pressoncetoturnonthemainpower(STANDBYmode). Press

again to turn off the main power.

4 POWER button (STANDBY/ON)

Press once to turn on the Monitor. Press again to turn off the

Monitor.

5 INPUT SELECTOR button

Press to select your program source. Each press of the INPUT

SELECTOR changes the selection to the next source.

INPUT1

INPUT3 INPUT2

INPUT4

6 CHANNEL buttons

Press plus (+) or minus (–) to tune to a higher or lower channel.

Only the preset channels can be tuned in using these buttons.

In some cases, the door may only open slightly when pushed.

In such cases, open the door with your finger as shown in the

figure at left.

PUSH

STANDBY/ON

POWER

DPO

STANDBY/ON

INPUT

MAIN POWER

CHANNEL

RETURN

SELECTOR

Download from Www.Somanuals.com. All Manuals Search And Download.

FRONT PANEL FUNCTIONS

7 RETURN button

CAUTION:

Press to set the Projection Monitor to its initial mode.

Do not press any operation button on the Projection Monitor

or the remote control unit while recording. Signals from the

MONITOR OUTPUT jacks may be temporarily interrupted

when a button is pressed.

Initial mode

Input selector:

TV channel:

VOLUME:

MUTING:

Set to TV.

Remains at the last channel set.

Remains at the last setting.

OFF

ATTENTION

The Projection Monitor Receiver will not function properly in

the following cases.

PICTURE

MODE:

STD

Set to 0.

STD

•

An electrical discharge in the CRT.

Lightning storms.

High static electricity environment.

Poor voltage regulation in the power source.

Parameters:

3DY/CLEVEL:

3DNRLEVEL:

COLORTEMP:

FLESHTONE:

SOUND

If the Projection Monitor does not operate properly, reset it as

follows:

1. Turn off the power of the unit with the 3 MAIN POWER

switch.

2. After approximately 1 minute, turn on the power with 3

MAIN POWER switch and 4POWER button.

MTS:

MAIN

Set to 0.

OFF

Parameters:

SURROUND:

SUPERBASS:

SCREEN

OFF

If the normal operation cannot be restored after the above

treatment, immediately unplug the power cord and call your

nearest PIONEER-authorized service center.

MODE:

V.POSITION:

CC:

NATURALWIDE

Set to 0.

OFF

DPO:

OFF

NOTE:

On rare occasions, an electrical discharge may occur inside the

CRT. It makes a short, sharp pop and either no sound is produced

or the volume level changes by itself. The SPLIT screen and

SEARCH screen functions will be cancelled automatically if an

electrical discharge occurs when this function is engaged.

•

WhenthisbuttonispressedwhileadjustingtheMULTI-

POINT convergence, the MULTI-POINT convergence

returns to the initial mode.

8 VOLUME buttons

Press plus (+) button to increase the volume, press minus (–)

button to decrease it.

9 INPUT 4 jacks

These inputs are for Video Movie and VCR. Use RCA-type pin

plug cords (the same as those used in Hi-Fi systems) and S-

VIDEO cords for connections. When the audio source to be

connected is monaural, connect the source to the L-(MONO)

jack.

-VIDEO

VIDEO

-AUDIO

-R

(MONO)

VOLUME

INPUT 4

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL UNIT FUNCTIONS

Set the mode switch to TV.

1 TV POWER button (STANDBY/ON)

Mode switch

Turns the power of the monitor on and off.

2 Input Selector buttons (TV, INPUT 1 to INPUT 4)

Press the button to select the source you wish to watch.

The screen will display your selection.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

3 SCREEN MODE button

INPUT

Press to select the SCREEN MODE.

SELECT

FREEZE

SPLIT

4 ANT (antenna selector) button

SCREEN

MODE

SUB CH

Press to switch between ANTENNA-A and ANTENNA-B

when you wish to watch TV.

ANT

DTV

DISPLAY

AUDIO

5 Direct channel selection buttons

Press the button (or buttons) that corresponds to the

channel that you wish to watch.

6 CH (channel) +, – button

Press plus (+) or minus (–) to tune in a higher or lower

channel. Only the preset channels can be tuned in using

these buttons.

ENTER

7 MUTING button

RETURN

Presstotemporarilyturnoffthesound. Pressagaintoreturn

to the previous volume level.

VOL

MUTING

8 Select/Adjust/Set buttons (SET/ENTER, 2, 3, 5, ∞)

2, 3, 5, ∞: Press to select or adjust items on the menu

screen.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

SET/ENTER: Press to activate the selected function.

DTV/SAT

GUIDE

POWER

9 FAVORITE CH buttons

SET/

ENTER

DTV/(SAT)

INFO

Thesebuttonscallupthechannelsthathavebeenassigned

to them.

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL UNIT FUNCTIONS

0 SPLIT/SEARCH screen buttons

SPLIT:

Press to turn the SPLIT screen function on

and off.

SEARCH:

SELECT:

Press to select the SEARCH screen mode.

Selectsthescreenforswitchingthechannel

or input source.*¹

FREEZE:

Whenthisbuttonispressedwiththeregular

screen, the screen will change to the SPLIT

screenandthepictureatthetimethebutton

was pressed will become the sub-picture,

displayed as a frozen image.

SUBCH+, –: Used to switch the channel for the sub-

picture of the SPLIT screen.

- DISPLAY button

Presstodisplaytheinputsource, channel, settingandother

screen indicators for a few seconds.

= CH ENTER button

Fix the selected channel with the direct channel selection

buttons.

~ CH RETURN (channel return) button

Press to switch between the current channel and the

channel you were watching immediately before.

! VOL (volume) +, – buttons

Press plus (+) button to increase the volume, press minus

(–) button to decrease it.

Volume level will appear on the screen as numbers and a

bar graph. The maximum volume level is “63”.

The display will disappear from the screen after 2 seconds.

@ MENU button

Press to turn on the menu screen for use in function

selection.

Press again to return to normal TV screen.

*1 With the 9-SEARCH screen, the search picture’ s input

source and channel cannot be switched.

NOTE:

If the remote control unit is left in total darkness for a long period

of time, it will not emit light, but will not be damaged. In this case,

place it in a bright place for a little while before using it.

Download from Www.Somanuals.com. All Manuals Search And Download.

TO WATCH TV

Best Horizontal and Vertical Viewing Angle

•

The optimum viewing angle is 140˚ in horizontal and 45˚ in vertical.

Watch from at least 10 feet (3m) away from the screen (optimum viewing distance is 10 to

23 feet).

45˚

140˚

Remote control unit

Turn on the MAIN POWER switch.

TV CBL VCR DVD

/SAT

/DTV

/LD

Turn on the POWER.

POWER

The green STANDBY/ON indicator lights up.

INPUT

Remote control unit

Control panel of the monitor

SELECT

FREEZE

SPLIT

Green indicator

SCREEN

MODE

SUB CH

STANDBY/ON

ANT

POWER

DTV

DISPLAY

AUDIO

STANDBY/ON

POWER

Set the mode switch to TV and

then press the TV button.

ENTER

Remote control unit

TV CBL VCR DVD

/SAT

/DTV

/LD

RETURN

VOL

MUTING

Select antenna A or B.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

Check the input signals at the ANTENNA A and B terminals.

SOURCE

DTV/SAT

GUIDE

POWER

Remote control unit

AN T . A CH

SET/

ENTER

DTV/(SAT)

INFO

ANT

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

Select a channel.

There are three methods for this.

1 Select by pressing the number button

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

(Example)

ENTER

Channel 5

→

(Or press

and then press

within 2 seconds

of during so.)

Control panel of the monitor

Channel 12 Press

and then press

within 2 seconds of

ENTER

during so. →

STANDBY/ON

• After pressing a number button, even if you do not press the CH

ENTER button, the channel will be switched to the one selected within

2 seconds.

INPUT

SELECTOR

POWER

CHANNEL

RETURN

VOLUME

• Depending on the channel, this switch may occur immediately after

the number button is pressed.

Download from Www.Somanuals.com. All Manuals Search And Download.

TO WATCH TV

VHF L

MID

VHF H SUPER

HYPER

UHF

2-6

7-13

14-69

A-5(95) A(14)

A-4(96) B(15)

A-3(97) C(16)

A-2(98) D(17)

A-1(99) E(18)

F(19)

J(23) Q(30) W+1(37) W+11(47) W+21(57) W+31(67) W+41(77) W+51(87) W+61(102) W+71(112) W+81(122

K(24) R(31) W+2(38) W+12(48) W+22(58) W+32(68) W+42(78) W+52(88) W+62(103) W+72(113) W+82(123

L(25) S(32) W+3(39) W+13(49) W+23(59) W+33(69) W+43(79) W+53(89) W+63(104) W+73(114) W+83(124

M(26) T(33) W+4(40) W+14(50) W+24(60) W+34(70) W+44(80) W+54(90) W+64(105) W+74(115) W+84(125

N(27) U(34) W+5(41) W+15(51) W+25(61) W+35(71) W+45(81) W+55(91) W+65(106) W+75(116

)

2-6

(STD)

)

CATV

7-13

O(28) V(35) W+6(42) W+16(52) W+26(62) W+36(72) W+46(82) W+56(92) W+66(107) W+76(117

P(29) W(36) W+7(43) W+17(53) W+27(63) W+37(73) W+47(83) W+57(93) W+67(108) W+77(118

W+8(44) W+18(54) W+28(64) W+38(74) W+48(84) W+58(94) W+68(109) W+78(119

W+9(45) W+19(55) W+29(65) W+39(75) W+49(85) W+59(100) W+69(110) W+79(120

W+10(46) W+20(56) W+30(66) W+40(76) W+50(86) W+60(101) W+70(111) W+80(121

)

G(20)

H(21)

I (22)

)

1-6

(HRC)

(IRC)

)

2 Select using the TV CH+/– button

CABLE (CATV) CHANNEL

ASSIGNMENT TABLE

The channels will switch according to the order set by channel

preset (See page 26).

In the cable tuning mode, channels can only be assigned

to numbers 01 to 125. The specific channel number

assignments and the corresponding alphabet

designation are shown at the bottom left of the channel

table.

Remote control unit

Control panel of the monitor

For example: Channel number '14' corresponds to

midband cable channel 'A'.

CHANNEL

NOTE:

Cable (CATV) services can vary according to area. The

channel number assignments shown in the channel

table may not correspond with the channel numbers

used by your local cable company. Direct tuning to

cable channels without using the cable company

converter 'or preselector' will depend on the specific

channels in use by the cable company. Direct tuning

to cable channels is limited to unencoded

(unscrambled) channels only. Check with your local

cable company for compatibility requirements.

3 Select using the FAVORITE CH button

Select your desired channel from the 4 in the memory of each

button: blue, green, red and yellow.

Remote control unit

FAVORITE CH

To turn off the sound

• Each time the button is pressed, the channel will be changed

in order of the 4 channels in that button's memory.

• The desired channels can be set. (See page 44.)

• When you select a channel using the FAVORITE CH button,

step 3 (Select antenna A or B) is not necessary.

Press the MUTING button.

MUTING

When mute is turned on, a volume indicator will

appear in red on the screen (and will disappear in

a few seconds).

If the MUTING button is pressed while a closed

caption signal is being received, CC/TEXT will be

displayed.

Adjust the volume.

Remote control unit

Control panel of the monitor

Press MUTING again to return to the previous

volume level.

VOL

VOLUME

Auto power off function

If the monitor is receiving no input signals in TV

mode, its power will turn off (go on standby) after

some time has passed.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHECKING THE MENU

Press MENU on the remote control unit.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

The MAIN MENU will be displayed on the screen.

Selectthedesiredmenuitemusing5or∞buttonoftheremote

control unit, and press SET/ENTER button to perform the

desired operations and settings.

SOURCE

POWER

DTV/SAT

GUIDE

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

• When the menu screen appears, the mode will switch from

SCREEN to FULL. When all menu selections have been

made, the previous screen mode will be restored.

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

PICTURE adjustment menu (See page 46)

PICTURE

SOUND

PICTURE

(

)

MOD E : US E R MOV I E

SCREEN

CON T RA S T

B L A C K L V L .

CO L OR

– 1 0

TV/SAT/DVD

SET/

SET UP

ENTER

T I N T

SHARP

– 1 0

USE:

O T H E R

END: MENU

USE:

END: MENU

E X I T

PICTURE

O T H E R

3 D Y / C L E V E L : 3

3 D NR L E V E L : 3

CO L OR T EMP : S T D

F L E SH T ON E : ON

USE:

END: MENU

E X I T

SOUND adjustment menu (See page 52)

PICTURE

SOUND

SCREEN

SOUND

MT S : MA I N

B A S S

– 1 0

T R E B L E

B A L ANC E

SET/

SET UP

ENTER

SURROUND : O F F

SUP E R B A S S : O F F

∞

USE:

END: MENU

USE:

END: MENU

E X I T

Download from Www.Somanuals.com. All Manuals Search And Download.

CHECKING THE MENU

SCREEN setting menu (See page 37)

PICTURE

SOUND

SCREEN

C I N EMA W I D E

V . POS I T I ON : – 1 0

SET/

SET UP

ENTER

∞

USE:

END: MENU

E X I T

END: MENU

Closed Caption menu (See page 40)

PICTURE

SOUND

SCREEN

C C : O F F

MOD E : C C – 2

SET/

SET UP

ENTER

∞

USE:

END: MENU

E X I T

END: MENU

SET UP menu

(See pages 26, 28, 31, 34, 41 and 56)

PICTURE

SOUND

SCREEN

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

DPO : O F F

SET/

SET UP

ENTER

CHANG E P A S SWORD

∞

USE:

END: MENU

USE:

END: MENU

E X I T

On screen indicators

USE: Indicates in light cyan the buttons that can be used on

the menu screen displayed.

END: End is for turning off the menu screen by pressing the

MENU button.

EXIT: To return to the previous menu screen, use the 5 or ∞

button to move to EXIT and then press SET/ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO CHANNEL PRESET

The broadcast frequencies that can be received depend on your area.

Memorize the broadcast stations that can be received in your area in the

preset.

Select TV.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

PressMENUandselect SETUP byusing

the5or∞buttonandthenpressingSET/

ENTER. (Refer to page 24.)

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Select CHANNELSETUP inthesameway.

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

ENTER

∞

USE:

END: MENU

E X I T

RETURN

VOL

MUTING

Select AUTO CHANNEL PRESET .

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET UP

SOURCE

DTV/SAT

GUIDE

CHANN E L S E T UP

AU T O CHANN E L PR E S E T

POWER

CHANN E L ADD / D E L

SET/

F A VOR I T E CHANN E L

ENTER

DTV/(SAT)

INFO

ENTER

∞

VCR REC

FAVORITE CH

∞

USE:

END: MENU

E X I T

RECEIVER

POWER

INPUT

VOL

Select ANTENNA , then select A or B.

SET UP

AU T O CHANN E L PR E S E T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

AN T E NNA : A

T V / C A B L E MOD E :

SET/

C A T V S T D

ENTER

AU T O PR E S E T S T AR T

∞

USE:

END: MENU

E X I T

NOTE:

The CHANNEL SET UP cannot be selected unless the

function is set up for TV.

SET UP

AU T O CHANN E L PR E S E T

AN T E NNA : A

T V / C A B L E MOD E :

C A T V S T D

SET/

ENTER

AU T O PR E S E T S T AR T

∞

USE:

END: MENU

E X I T

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO CHANNEL PRESET

Select TV/CABLE MODE , then select

thebroadcastsystemtobereceivedfrom

AIR, CATV STD, CATV HRC or CATV IRC.

•

Ask your dealer or cable service station for the mode of your

local CATV system.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

SET UP

INPUT

AU T O CHANN E L PR E S E T

AN T E NNA : A

T V / C A B L E MOD E :

SET/

C A T V S T D

SELECT

FREEZE

SPLIT

ENTER

SCREEN

MODE

SUB CH

ANT

AU T O PR E S E T S T AR T

∞

DTV

DISPLAY

AUDIO

USE:

END: MENU

E X I T

SET UP

AU T O CHANN E L PR E S E T

T V / C A B L E MOD E :

A I R

SET/

C A T V S T D

ENTER

C A T V HRC

C A T V I RC

ENTER

∞

USE:

END: MENU

E X I T

RETURN

VOL

MUTING

Select AUTO PRESET START .

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET UP

AU T O CHANN E L PR E S E T

SOURCE

AN T E NNA : A

DTV/SAT

GUIDE

T V / C A B L E MOD E :

POWER

SET/

C A T V S T D

ENTER

SET/

ENTER

DTV/(SAT)

INFO

AU T O PR E S E T S T AR T

∞

VCR REC

FAVORITE CH

USE:

END: MENU

E X I T

RECEIVER

POWER

INPUT

VOL

•

AUTO CHANNEL PRESET starts.

CH 3

P L E A S E WA I T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

AU T O PROGRAMM I N G

•

When AUTO CHANNEL PRESET ends, the Monitor will return

to step 5. Perform steps 5 to 7 if the other antenna is being

used.

NOTE:

If AUTO CHANNEL PRESET is not performed, refer to

the steps on page 41 and onwards to preset channels.

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVERGENCE ADJUSTMENT

Earth magnetism may deviate the color misconvergence in some areas.

After setting up the TV, or if the picture color is misconverged, be sure to

realign color convergence, after the TV has warmed up for 30 minutes or

more.

PressMENUandselect SETUP byusing

TV CBL VCR DVD

/SAT

/DTV

/LD

the5or∞buttonandthenpressingSET/

POWER

INPUT

ENTER. (Refer to page 24.)

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

Select CONVERGENCE inthesameway.

ANT

DTV

DISPLAY

AUDIO

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

∞

USE:

END: MENU

E X I T

ENTER

Select screen mode.

RETURN

VOL

MUTING

SET UP

CONV E RG E NC E

NA T URA L W I D E

C I N EMA W I D E

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET/

Z OOM

ENTER

F U L L AND 4 : 3 NORMA L

SOURCE

DTV/SAT

GUIDE

F U L L F OR HD

POWER

∞

SET/

ENTER

USE:

END: MENU

E X I T

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

•

Center convergence adjustment will be accessed.

RECEIVER

POWER

INPUT

VOL

When the cross pattern is white

If the cross pattern shows other

colors or when one side of the

white line is red or blue

AD J CONV E RG E NC E

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

USE:

END: MENU

USE:

END: MENU

The color is converged. Press SET

button twice, proceed onto page

57 and perform MULTI-POINT

convergence.

It indicates that the color is

misconverged. Proceed onto step

4 and perform the adjustment.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONVERGENCE ADJUSTMENT

Move the red line onto the green line.

Move the vertical line.

AD J CONV E RG E NC E

SET/

TV CBL VCR DVD

ENTER

/SAT

/DTV

/LD

POWER

∞

INPUT

USE:

END: MENU

SELECT

FREEZE

SPLIT

Move the horizontal line.

SCREEN

MODE

SUB CH

ANT

DTV

AD J CONV E RG E NC E

DISPLAY

AUDIO

SET/

ENTER

∞

USE:

END: MENU

ENTER

Move the blue line onto the yellow line.

RETURN

AD J CONV E RG E NC E

VOL

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

USE:

END: MENU

POWER

SET/

ENTER

SET/

ENTER

DTV/(SAT)

INFO

AD J CONV E RG E NC E

∞

VCR REC

FAVORITE CH

SET/

ENTER

RECEIVER

POWER

INPUT

VOL

USE:

END: MENU

SET UP

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

CONV E RG E NC E

NA T URA L W I D E

AD J C E N T E R PO I N T

AD J MU L T I - PO I N T

USE:

END: MENU

E X I T

•

When ADJ CENTER POINT is selected, center convergence

adjustment will be accessed.

Select ADJ MULTI-POINT to perform fine convergence tuning.

Seepage57forfurtherinformationonmulti-pointconvergence

tuning.

After completing the convergence

adjustment, press MENU to turn the

menu off.

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAM BLOCK (V. CHIP) FUNCTION

Since laws have been passed in the United States requiring a way of blocking undesirable programming, the V-chip has become a

required component in television sets. The V-chip is a computer chip which decodes signals added to broadcast signals transmitted

by television broadcasters. These signals are classified by programming content (e.g., amount of violence or sexual content) and

age, and viewers may specify settings which block certain types of programming.

Program blocking may be set to a specific level judged by parents to be harmful to children depending on their age or the content of

the programming in question, and the V-chip makes it impossible for such children to view programs with ratings exceeding the

specified level.

The V-chip uses the following rating system.

MPAA RATING

RATING

GENERAL AUDIENCES. All ages admitted.

PG-13

PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.

PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.

RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NO ONE 17 AND UNDER ADMITTED.

Age-Base

NC-17

X Rating is an older rating that is unified with NC-17 but may be encoded on older movie's data.

NOT RATED

TV PARENTAL GUIDELINES

Description and Content Themes

RATING

–

TV-Y

–

‡

–

TV-Y7

TV-G

–

FV: Fantasy Violence

D: Sexually Suggestive Dialog

L: Adult Language

S: Sexual Situations

V: Violence

Age-Base

TV-PG

TV-14

TV-MA

‡

–

‡

TV-Y

All Children. This program is designed to be appropriate

for all children.

TV-14 Parents Strongly Cautioned. This program contains some

material that many parents would find unsuitable for

children under 14 years of age.

TV-Y7 Directed to Older Children. This program is designed for

children age 7 and above.

This program contains one or more of the following:

(D) Intensely suggestive dialogue

Note: For those programs where fantasy violence may be

moreintenseormorecombativethanotherprograms

in this category, such programs will be designated

TV-Y7-FV.

(L) Strong coarse language

(S) Intense sexual situations

(V) Intense violence

TV-MA MatureAudienceOnly. Thisprogramisspecificallydesigned

to be viewed by adults and therefore may be unsuitable for

children under 17.

TV-G

General Audience. Most parents would find this program

suitable for all ages.

This program contains one or more of the following:

(L) Crude indecent language

TV-PG Parental Guidance Suggested. This program contains

material that parents may find unsuitable for younger

children.

(S) Explicit sexual activity

(V) Graphic violence

The program contains one or more of the following:

(D) Some suggestive dialogue

(L) Infrequent coarse language

(V) Moderate violence

(S) Some sexual situations

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAM BLOCK (V. CHIP) FUNCTION

SETTING THE PROGRAM BLOCKING

LEVEL

Press MENU and select SET UP by using

TV CBL VCR DVD

/SAT

/DTV

/LD

the5or∞buttonandthenpressingSET/

POWER

ENTER. (Refer to page 24.)

INPUT

SELECT

FREEZE

SPLIT

Select PROGRAM BLOCK in the same

SCREEN

MODE

SUB CH

ANT

way.

DTV

DISPLAY

AUDIO

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

∞

USE:

END: MENU

E X I T

ENTER

Enter password.

RETURN

VOL

•

Press numeric buttons ‘0’ through ‘9’ to enter a four-digit

password.

MUTING

IfthepasswordhasnotbeenchangedasdescribedinChanging

Password (p. 34), enter the default password of ‘1234’.

If you wish to change the password, see p. 34 Changing

Password for instructions on how to do so.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

DTV/(SAT)

INFO

SET UP

∞

PROGRAM B L OC K

VCR REC

FAVORITE CH

I NPU T YOUR P A S SWORD

RECEIVER

POWER

INPUT

VOL

USE:

END: MENU

E X I T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Select BLOCK .

SET UP

PROGRAM B L OC K

B L OC K : O F F

RA T I NG S Y S T EM

SET/

ENTER

∞

USE:

END: MENU

E X I T

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAM BLOCK (V. CHIP) FUNCTION

Set BLOCK to ON.

SET UP

PROGRAM B L OC K

B L OC K : ON O F F

RA T I NG S Y S T EM

SET/

ENTER

TV CBL VCR DVD

/SAT

/DTV

/LD

∞

POWER

USE:

END: MENU

E X I T

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

Select MPAARATING or TVPARENTAL

GUIDELINES .

ANT

DTV

DISPLAY

AUDIO

SET UP

US A RA T I NG S Y S T EM

MP A A RA T I NG

T V P AR E N T A L

SET/

GU I D E L I N E S

ENTER

∞

USE:

END: MENU

E X I T

ENTER

RETURN

Select and then confirm the rank of the

MPAA RATING.

VOL

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET UP

MP A A RA T I NG

SOURCE

DTV/SAT

GUIDE

V I EW

B L OC K

POWER

SET/

PG – 1 3

SET/

ENTER

DTV/(SAT)

INFO

NC – 1 7

∞

VCR REC

FAVORITE CH

USE:

END: MENU

E X I T

RECEIVER

POWER

INPUT

VOL

SET UP

MP A A RA T I NG

V I EW B L OC K

V I EW

SET/

PG – 1 3

V I EW

ENTER

V I EW

NC – 1 7

V I EW

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

∞

B L OC K

USE:

END: MENU

E X I T

Select and confirm the rank of the TV

PARENTAL GUIDELINES.

NOTE:

• Blocking programming with a low rating will cause

all programming with a higher rating also to be

blocked.

• The ‘NR’ (not rated) of the MPAA RATING may be

set to ‘View’ or ‘Block’ without regarded to other

ratings.

SET UP

T V P AR E N T A L G L .

F V

–

T V – Y

SET/

T V – Y 7

T V – G

ENTER

–

T V – PG

T V – 1 4

T V –MA

E X I T

–

∞

–

USE:

END: MENU

•

Each time the SET/ENTER button is pressed, the setting will

toggle between ‘B’ (Block) and ‘V’ (View).

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAM BLOCK (V. CHIP) FUNCTION

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

HOW TO REMOVE BLOCKING

FROM A PROGRAM IN PROGRESS

REMOVING BLOCKING IN

MULTI-SCREEN MODE

When a selected program or a program on a channel to which

you have just changed has a rating higher than the current

program blocking rating, the picture and sound will cut off

and an enter password screen will appear.

•

Just as in normal single-screen mode, programs are

blocked in SPLIT screen and SEARCH screen mode (see

pages 38 and 39), but blocking may be removed only from

the Main picture.

To remove blocking from a Sub picture or Search picture

screen, switch to the Main picture for that channel and

then remove blocking.

When viewing in FREEZE screen (p. 38) mode, only

programming on the Moving screen to the left will be

blocked and the programming on the Still screen to the

right will be displayed as is.

PROGRAM B L OC K E D

MP A A RA T I NG

: R

AN T . A 3 6

Once the password has been entered, blocking will be

removed.

NOTE:

Even when a password has been entered to cancel a block, if the

monitor power is turn OFF then turned ON again, the Program

Blocked screen will appear.

Moving screen

Still screen

Block

AN T . A 3 6

PROGRAM

B L OC K E D

: PG

Still screen

•

When blocking is on during SEARCH screen mode, the

screen at search picture side will be blacked out (mute)

without displaying: “PROGRAM BLOCKED”.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING PASSWORD

A password must be entered to turn program blocking on and off. While

the password is set to ‘1234’ at shipping time, it is strongly recommended

that the password be changed after purchase.

Press MENU and select SET UP by using

TV CBL VCR DVD

the5or∞buttonandthenpressingSET/

/SAT

/DTV

/LD

POWER

ENTER. (Refer to page 24.)

INPUT

SELECT

FREEZE

SPLIT

Select CHANGEPASSWORD inthesame

SCREEN

MODE

SUB CH

ANT

way.

DTV

DISPLAY

AUDIO

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

∞

USE:

END: MENU

E X I T

ENTER

RETURN

Enter current password.

VOL

MUTING

•

Press numeric buttons ‘0’ through ‘9’ to enter a four-digit

password.

•

If no password has been set, enter the default password of

‘1234’.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET UP

SET/

ENTER

CHANG E P A S SWORD

DTV/(SAT)

INFO

∞

I NPU T YOUR P A S SWORD

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

USE:

END: MENU

E X I T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Cut along dotted line and file after reading.

If you forget the password

When the message ‘INPUT YOUR PASSWORD’ shown in step 3 is

displayed, press the RETURN button on the front panel and hold it

down for 3 seconds or longer.

∫Û¿.˘<ÙÛ. ∫Û¿.≤<ÙÛ.

PROGRAM BLOCK password No.

The password will become “1234”.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING PASSWORD

Enter new password.

•

Press numeric buttons ‘0’ through ‘9’ to enter a four-digit

password and press the SET/ENTER button.

SET UP

CHANG E P A S SWORD

TV CBL VCR DVD

/SAT

/DTV

/LD

PR E S S NUME R I C K E Y S

T O D E F I N E

POWER

SET/

ENTER

INPUT

N EW P A S SWORD

SELECT

FREEZE

SPLIT

USE:

END: MENU

E X I T

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

ENTER

RETURN

VOL

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING SCREEN SIZE

SETTING SCREEN MODE

The size of the picture or the picture's range projected on the screen can

be changed between five screen sizes.

TV CBL VCR DVD

/SAT

/DTV

/LD

Press the SCREEN MODE button.

POWER

INPUT

SCREEN

MODE

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

•

Each time the SCREEN MODE button is pressed, the mode changes in

the following order.

AUDIO

NATURAL WIDE

4:3 NORMAL

CINEMA WIDE

ZOOM

FULL

NATURAL WIDE

CINEMA WIDE

ZOOM

ENTER

Suitable for when viewing news or sports

programs. Movies or sports programs can

be viewed with an expansive powerful

image.

RETURN

VOL

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

POWER

DTV/SAT

GUIDE

Mainly suitable for viewing Vista size and

other such movie images.

Providesamoreexpansive, powerfulimage.

This screen size is convenient when viewing

a Cinemascope size image that has subtitles.

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

Mainly suitable for viewing Cinemascope

size and other such movie images.

Providesamoreexpansive, powerfulimage.

NOTES:

FULL

• This Monitor is provided with modes to deal with

screens of various aspect ratios. It is recommended

that programs and software be watched in the

appropriate mode.

Suitable for wide screen images.

• When 4:3 images are fully displayed on a wide TV

screen in the NATURAL WIDE mode, CINEMA WIDE

mode, ZOOM mode, or FULL mode, some parts of

the images may be cut off or distorted.

• When 1080i or 480p component signals or RGB

signals are input, SCREEN MODE will be limited to

FULL.

• Continuous operation for extended periods in 4:3

NORMAL mode may burn out the screen. We thus

recommend that this mode be used only in

conjunction with another SCREEN mode.

4:3 NORMAL

Suitable for when viewing news or sit coms.

The video software can be viewed in its

original screen frame size.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING SCREEN SIZE

TO ADJUST THE SCREEN POSITION

In the CINEMA WIDE or ZOOM mode, the screen position can be adjusted

to the top or bottom.

PressMENUandselect SCREEN byusing

TV CBL VCR DVD

/SAT

/DTV

/LD

the5or∞buttonandthenpressingSET/

POWER

INPUT

ENTER. (Refer to page 24.)

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

Select V. POSITION in the same way.

ANT

DTV

DISPLAY

AUDIO

SCREEN

C I N EMA W I D E

SET/

V . POS I T I ON : – 1 0

ENTER

USE:

END: MENU

E X I T

∞

ENTER

RETURN

Adjust the screen position.

VOL

MUTING

•

Adjustable range

CINEMA WIDE mode : –15 to 15

ZOOM mode

: –25 to 25

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

DTV/(SAT)

INFO

SET/

V . POS I T I ON :

– 1 0

END: MENU

∞

ENTER

USE:

VCR REC

FAVORITE CH

∞

RECEIVER

POWER

INPUT

VOL

After adjusting, press MENU to turn the

menu off.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

TV/SAT/DVD

NOTE:

Screen position cannot be adjusted in NATURAL

WIDE, FULL, or 4:3 NORMAL mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI-SCREEN FUNCTION

VIEWING TWO SCREENS (SPLIT screen)

Thescreencanbesplitvertically, makingitpossibletoviewdifferentimages

on the left and right.

Press the SPLIT button.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

AN T . A 3 6

AN T . A 2 5

INPUT

SPLIT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

(Main picture)

(Sub picture)

•

The screen on which is displayed is the main picture, and the other

screen is the sub-picture. Sound will be output for the main picture.

Regular operations can be performed on the main picture.

When the SUB CH +,- buttons are pressed, the channel for the sub-

picture will be changed.

•

ENTER

•

When the SELECT button is pressed, the

screen.

The MONITOR OUTPUT terminal outputs the main picture signal.

Pressing the SPLIT button again will restore the original screen.

will move to the other

RETURN

•

VOL

MUTING

MAKING NOTES ON PROGRAM

CONTENT (FREEZE screen)

NOTES:

• The same image cannot be viewed as both the main

picture and the sub-picture.

The screen can be frozen, such as for taking down a recipe from a cooking

program or an address for entering a quiz or the like.

• Pressing the MENU button in SPLIT or FREEZE

screen mode restores the screen display to normal

and displays the menu on screen.

• These functions cannot be used when INPUT 1 or

INPUT 2 is receiving a 1080i or 480p component

signal (or the signals might not be received or noise

might be generated).

Press the FREEZE button.

AN T . A 3 6

• When a TV broadcast is being received, the screen

on the right will not show the antenna B signal.

• RGB signals input from INPUT3 cannot be

displayed.

FREEZE

Moving screen

Still screen

• Continuous operation for extended periods in SPLIT

or FREEZE screen mode may burn out the screen.

We thus recommend that these modes only be used

in conjunction with the normal screen mode.

• If the non-interlace signal for a TV game etc. is

entered to the left screen during SPLIT screen

mode, the right screen may be disrupted. If this

occurs, use the right screen for TV game etc. entry.

•

This function is operable only with the normal screen.

Pressing the FREEZE button again will restore the original screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI-SCREEN FUNCTION

SEARCHING FOR A PROGRAM ON A

DIFFERENT CHANNEL (SEARCH screen)

Thescreenontherightsidecanbemadeintonineorthreedifferentscreens,

making it possible to search for programs or enjoy multiple images.

TV CBL VCR DVD

/SAT

/DTV

/LD

Press the SEARCH button.

POWER

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

•

Each time the SEARCH button is pressed, the screen mode changes in

the following order.

DISPLAY

AUDIO

Normal screen/SPLIT screen

3-SEARCH screen

9-SEARCH screen

ENTER

1 9-SEARCH screen

1 2

4 1

1 8

4 9

3 0

5 2

AN T . A 3 6

RETURN

VOL

MUTING

Main picture

Search picture

•

On the search picture, the antenna A preset channel (see page 26) will

bedisplayedasafrozenimage. If9ormorechannelshavebeenpreset,

the screens will automatically be switched and displayed.

The search picture cannot be operated.

If the channel or input source is changed, SEARCH screen mode will

turn off.

• Pressing the MENU button in SEARCH screen mode

restores the screen display to normal and displays

the menu on screen.

• These functions cannot be used when INPUT 1 or

INPUT 2 is receiving a 1080i or 480p component

signal (or the signals might not be received or noise

might be generated).

•

2 3-SEARCH screen

• RGB signals input from INPUT3 cannot be

displayed.

• Continuous operation for extended periods in

SEARCH screen mode may burn out the screen.

We thus recommend that these modes only be used

in conjunction with the normal screen mode.

• The only channels displayed on the SEARCH screen

will be those with input signals input from antenna

A. Antenna B channels cannot be displayed on this

screen.

• If the non-interlace signal for a TV game etc. is

entered to the left screen during 9-SEARCH screen

or 3-SEARCH screen modes, the screen may be

disrupted.

AN T . A 3 6

A 1 0

Main picture

Search picture

•

Press the SELECT button to select image that you wish to switch the

channel or input source to. When the color of the channel or input

indicator changes to yellow, screen operations can be performed. (Use

only the selector buttons, direct channel selection buttons and CH +,-

buttons.)

Sound output is limited to the main picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

CLOSED CAPTION DECODE FUNCTION

The closed caption broadcasting multiplexes

captionsignals(characterinformation)inthevideo

Press MENU and select CC by using the

5 or ∞ button and then pressing SET/

signal to allow the displaying of characters on the

screen. This unit incorporates a closed caption

decoder which allows, with the use of the remote

ENTER. (Refer to page 24.)

controlunit, todisplaycharacterinformationwhen

receiving character-multiplexed broadcasting

signals (closed caption broadcasting) or playing a

Select CC in the same way.

video cassette or Video Disc with the

mark etc..

C C : O F F

MOD E : C C – 2

SET/

ENTER

USE:

END: MENU

E X I T

∞

ENTER

RETURN

VOL

Set CC to ON.

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

C C : ON O F F

MOD E : C C – 2

SOURCE

DTV/SAT

GUIDE

SET/

POWER

ENTER

SET/

ENTER

DTV/(SAT)

INFO

USE:

E X I T

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

Select MODE .

C C : ON

MOD E : C C – 2

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

SET/

ENTER

USE:

E X I T

∞

SelectthedesiredCC(ClosedCaptionCC-

1 to CC-4) or TEXT (TEXT-1 to TEXT-4).

NOTES:

• When a video cassette or Video Disc carrying the

mark etc. is played, the closed caption signal

may not be output depending on the VCR or Video

disc player.

MOD E : C C – 1 T E X T – 1

C C – 2 T E X T – 2

• During TV broadcast reception, closed caption

signal may not be decoded properly if the receiving

broadcast signal is weak.

• Closed caption signal may not be decoded properly

depending on the recording condition of the video

cassette tape.

C C – 3 T E X T – 3

SET/

C C – 4 T E X T – 4

ENTER

USE:

END: MENU

E X I T

∞

• The character information will not be displayed

while the menu is displayed. To turn on the

character information, press the MENU button and

turn off the MENU.

• This function cannot be used when 1080i or 480p

component signals are input.

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING CHANNEL SET UP

TO ADD OR DELETE PRESET CHANNELS

Broadcast stations preset by auto channel preset which are unnecessary

can be deleted. Broadcast stations to be watched that were not preset by

auto channel preset can be preset.

ADD ........... Manually presets channels that were not preset by AUTO

CHANNEL PRESET.

DEL ............ Deletes channels that are not required for reception. The

deletedchannelscanbeskippedwhenselectingchannels

with the + and – CH (channel) buttons.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

•

Perform the following after completing AUTO CHANNEL PRESET.

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

PressMENUandselect SETUP byusing

the5or∞buttonandthenpressingSET/

ENTER. (Refer to page 24.)

DTV

DISPLAY

AUDIO

Select CHANNELSETUP inthesameway.

SET UP

ENTER

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

RETURN

DPO : O F F

ENTER

CHANG E P A S SWORD

VOL

MUTING

∞

USE:

END: MENU

E X I T

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

Select CHANNEL ADD/DEL .

SET/

ENTER

DTV/(SAT)

INFO

SET UP

∞

CHANN E L S E T UP

VCR REC

FAVORITE CH

AU T O CHANN E L PR E S E T

CHANN E L ADD / D E L

RECEIVER

SET/

F A VOR I T E CHANN E L

ENTER

POWER

INPUT

VOL

∞

USE:

END: MENU

E X I T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Select ANTENNA , then select A or B.

SET UP

CHANN E L ADD / D E L

AN T E NNA : A

CHANN E L : 1 2 5

SET/

S E T T I NG : ADD

L A B E L : A B CD

ENTER

∞

USE:

END: MENU

E X I T

SET UP

CHANN E L ADD / D E L

AN T E NNA : A

CHANN E L : 1 2 5

S E T T I NG : ADD

L A B E L : A B CD

SET/

ENTER

∞

USE:

END: MENU

E X I T

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING CHANNEL SET UP

Select CHANNEL , thenselectachannel.

SET UP

CHANN E L ADD / D E L

AN T E NNA : A

CHANN E L : 1 2 5

SET/

S E T T I NG : ADD

L A B E L : A B CD

ENTER

TV CBL VCR DVD

/SAT

/DTV

/LD

∞

POWER

USE:

END: MENU

E X I T

INPUT

SELECT

FREEZE

SPLIT

SET UP

CHANN E L ADD / D E L

AN T E NNA : A

SCREEN

MODE

SUB CH

ANT

CHANN E L : 1 2 5

S E T T I NG : ADD

L A B E L : A B CD

DTV

SET/

DISPLAY

ENTER

AUDIO

∞

USE:

END: MENU

E X I T

Select SETTING , then select ADD

(addition) or DEL (deletion).

ENTER

RETURN

SET UP

CHANN E L ADD / D E L

VOL

AN T E NNA : A

MUTING

CHANN E L : 1 2 5

SET/

S E T T I NG : ADD

L A B E L : A B CD

ENTER

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

∞

SOURCE

DTV/SAT

GUIDE

USE:

END: MENU

E X I T

POWER

SET/

ENTER

DTV/(SAT)

INFO

SET UP

∞

CHANN E L ADD / D E L

AN T E NNA : A

VCR REC

FAVORITE CH

CHANN E L : 1 2 5

S E T T I NG : ADD D E L

L A B E L : A B CD

SET/

RECEIVER

ENTER

POWER

INPUT

VOL

∞

USE:

END: MENU

E X I T

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING CHANNEL SET UP

Select LABEL and input the label

characters.

•

When ADD has been selected in step 6, a label of 4 characters

can be input for the added channel.

TV CBL VCR DVD

SET UP

/SAT

/DTV

/LD

CHANN E L ADD / D E L

AN T E NNA : A

POWER

CHANN E L : 1 2 5

INPUT

SET/

S E T T I NG : ADD

ENTER

L A B E L : A B CD

SELECT

FREEZE

SPLIT

∞

SCREEN

MODE

SUB CH

USE:

END: MENU

ANT

E X I T

DTV

DISPLAY

AUDIO

•

Input the first character.

When

is selected, a space can be input.

is selected and input, label character input mode will

When

terminate.

SET UP

CHANN E L ADD / D E L

ENTER

AN T E NNA : A

A B CD E F G

CHANN E L : 1 2 5 H I J K LMN

S E T T I NG : ADD OPQRS T U

SET/

ENTER

L A B E L : A B CD

VWX Y Z 1 2

3 4 5 6 7 8 9

0 / – _ .

RETURN

VOL

∞

MUTING

USE:

END: MENU

E X I T

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

•

Input the second to fourth characters as well.

SOURCE

DTV/SAT

GUIDE

POWER

SET/

Repeat steps 4 to 7 to add and delete

other channels.

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING CHANNEL SET UP

FAVORITE CHANNEL SET UP

Assigning your favorite channels to the four buttons (blue, green, red and

yellow) on the remote control unit makes it easy to call them up. Four

channels can be assigned to each button, making it possible to set a total

of 16 channels.

TV CBL VCR DVD

/SAT

/DTV

/LD

PressMENUandselect SETUP byusing

POWER

INPUT

the5or∞buttonandthenpressingSET/

SELECT

FREEZE

SPLIT

ENTER. (Refer to page 24.)

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Select CHANNELSETUP inthesameway.

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

∞

ENTER

USE:

END: MENU

E X I T

RETURN

VOL

Select FAVORITE CHANNEL .

MUTING

SET UP

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

CHANN E L S E T UP

AU T O CHANN E L PR E S E T

SOURCE

DTV/SAT

GUIDE

CHANN E L ADD / D E L

SET/

F A VOR I T E CHANN E L

POWER

ENTER

SET/

ENTER

DTV/(SAT)

INFO

∞

USE:

END: MENU

E X I T

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

Select the color of the button you wish

to set.

SET UP

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

F A VOR I T E CHANN E L

B L U E

GR E E N

SET/

R E D

ENTER

Y E L L OW

∞

USE:

END: MENU

E X I T

NOTE:

A channel set for DEL with CHANNEL ADD/DEL (page

41) cannot be set as a FAVORITE CHANNEL.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING CHANNEL SET UP

Select number.

SET UP

F A VOR I T E CHANN E L

Y E L L OW AN T

SET/

1 1 4

ENTER

5 6

TV CBL VCR DVD

2 3

/SAT

/DTV

/LD

∞

POWER

USE:

END: MENU

E X I T

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

Select antenna.

ANT

DTV

DISPLAY

AUDIO

SET UP

F A VOR I T E CHANN E L

Y E L L OW AN T

SET/

1 1 4

5 6

2 3

ENTER

∞

USE:

END: MENU

E X I T

ENTER

•

If you made a mistake during setting, press SET to select the

incorrect entry and set it correctly.

RETURN

VOL

MUTING

Select the channel.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET UP

F A VOR I T E CHANN E L

SOURCE

DTV/SAT

GUIDE

Y E L L OW AN T

POWER

SET/

1 1 4

5 6

2 3

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

USE:

END: MENU

E X I T

RECEIVER

POWER

INPUT

VOL

To set another number, repeat steps 5 to

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Tosetabuttonofadifferentcolor, repeat

steps 4 to 7.

•

To return to step 4, press either the 5 or the ∞ button to select

EXIT and then press the SET/ENTER button.

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE ADJUSTMENTS

This device has three types of picture quality settings in memory. You can

select your favorite from them or set the picture quality you desire and

store it in memory.

RECALL THE DESIRED SETTINGS

TV CBL VCR DVD

/SAT

/DTV

/LD

Press MENU and select PICTURE by

POWER

INPUT

usingthe5or∞buttonandthenpressing

SELECT

FREEZE

SPLIT

SET/ENTER. (Refer to page 24.)

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Select MODE in the same way.

PICTURE

(

)

MOD E : US E R MOV I E

CON T RA S T

B L A C K L V L .

CO L OR

– 1 0

SET/

ENTER

T I N T

SHARP

– 1 0

ENTER

O T H E R

∞

USE:

END: MENU

E X I T

RETURN

VOL

MUTING

Select the desired setting.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

SET/

DTV/(SAT)

INFO

ENTER

∞

VCR REC

FAVORITE CH

∞

STD

MOV I E

USE:

GAME

USER

MOD E :

END: MENU

RECEIVER

POWER

INPUT

VOL

STD ............ Sets standard picture quality.

MOVIE........ Reduces contrast making dark images easier to see.

Effectiveformoviesthathavemanydarkimagessuch

as night scenes etc..

GAME ........ Lowers the relative contrast of TV game and personal

computer images to minimize discomfort to the eyes.

Thiswillminimizebadeffectssuchasdiscoloredspots

or stains on the CRT of the Monitor.

NOTE:

MOVIE or GAME mode may not be selected when

receiving RGB input.

USER ......... Calls up the picture quality the user has set. See page

47 for setting.

NOTES on GAME mode setting:

• We do not recommend the use of the Monitor for

video games, still pictures, or computers due to the

potential damage to the CRTs. In the event a

consumer needs to use these devices for a short

period of time, the GAME mode will minimize

potential damage to the CRTs by lowering the

relative contrast.

• All signals output from the Projection Monitor will

be unaffected. Only the original output signal is sent

through the output jacks.

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE ADJUSTMENTS

STORING THE SET PICTURE QUALITY

IN MEMORY

USER mode can be set for each input source: TV and INPUT 1 to INPUT 4.

TV CBL VCR DVD

/SAT

/DTV

/LD

Select the input source and show the

image on the screen.

POWER

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

INPUT

If VCR or DVD/LD has been

selected, start playback for the

relevant device.

ANT

DTV

DISPLAY

AUDIO

Press MENU and select PICTURE .

PICTURE

ENTER

SOUND

SCREEN

SET/

ENTER

SET/

SET UP

RETURN

ENTER

VOL

MUTING

USE:

∞

END: MENU

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

POWER

DTV/SAT

GUIDE

Adjust the desired picture quality.

(Refer to steps 2 and 3 on page 48.)

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

•

If any mode (STD, MOVIE, or GAME) is adjusted, USER mode

will be entered.

RECEIVER

The last mode that was adjusted will become the USER sub

mode (indicated in parentheses).

A USER mode can be stored for TV and the four input sources.

POWER

INPUT

VOL

PICTURE

(

)

MOD E : US E R S T D

Indicates the adjusted picture

quality setting that is the base

for USER mode.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

CON T RA S T

B L A C K L V L .

CO L OR

– 1 0

T I N T

SHARP

– 1 0

O T H E R

USE:

END: MENU

E X I T

After adjusting, press MENU to turn the

menu off.

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE ADJUSTMENTS

TO ADJUST THE PICTURE QUALITY

The CONTRAST, BLACK LEVEL (brightness), COLOR, TINT and SHARP

(sharpness) can be adjusted.

Press MENU and select PICTURE .

(Refer to page 24.)

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

SELECT

FREEZE

SPLIT

Select the adjustment item.

SCREEN

MODE

SUB CH

ANT

DTV

PICTURE

DISPLAY

AUDIO

(

)

MOD E : US E R MOV I E

CON T RA S T

B L A C K L V L .

CO L OR

– 1 0

SET/

ENTER

T I N T

SHARP

– 1 0

O T H E R

∞

USE:

END: MENU

E X I T

ENTER

Adjust by pressing 2 or 3 .

RETURN

•

The adjusting range is –30 to 30.

VOL

MUTING

The numerical value comes down to press

and comes up to

press

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

SET/

DTV/(SAT)

INFO

ENTER

∞

VCR REC

FAVORITE CH

∞

CON T RA S T

– 1 0

USE:

END: MENU

RECEIVER

POWER

INPUT

VOL

•

The set picture quality will be stored in memory as USER mode

(see page 47).

Repeat steps 2 and 3 for other items.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

After adjusting, press MENU to turn the

menu off.

TV/SAT/DVD

NOTES:

• The COLOR, TINT, and SHARP settings may not be

changed when receiving RGB input.

• When DPO is on, CONTRAST, BLACK LEVEL and

COLOR cannot be adjusted. (See page 56.)

• When picture quality has been adjusted, the user

mode data will be overwritten with the new

settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE ADJUSTMENTS

OTHER PICTURE QUALITY ADJUSTMENTS

The following four fine adjustments are available.

1 3D Y/C LEVEL

2 3D NR LEVEL

3 COLOR TEMP (Color Temperature)

4 FLESH TONE

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

Press MENU and select PICTURE .

(Refer to page 24.)

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Select OTHER .

PICTURE

(

)

MOD E : US E R MOV I E

CON T RA S T

B L A C K L V L .

CO L OR

– 1 0

SET/

ENTER

T I N T

SHARP

– 1 0

O T H E R

∞

ENTER

USE:

END: MENU

E X I T

RETURN

VOL

MUTING

1 To adjust 3D Y/C LEVEL

Perform this adjustment when noises appear at the color borders

of the image.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

NOTE:

POWER

This function can be used only when viewing a source that has been

connected to the antenna or composite video input terminal.

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

Select 3D Y/C LEVEL .

RECEIVER

PICTURE

POWER

INPUT

VOL

O T H E R

3 D Y / C L E V E L : 3

3 D NR L E V E L : 3

SET/

CO L OR T EMP : S T D

F L E SH T ON E : ON

ENTER

∞

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

USE:

END: MENU

E X I T

Select the desired level.

NOTE:

Only the COLOR TEMP settings may be changed when

SET/

ENTER

receiving RGB input.

∞

3 D Y / C L E V E L :

USE:

END: MENU

Suitable for software

using dynamic images

Suitable for software

using still images

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE ADJUSTMENTS

2 To adjust 3D NR LEVEL

Reduces the noise level of the luminance and chrominance signals

when there is S-VIDEO input.

NOTE:

This function can be used only when viewing a source that has been

connected to the S-VIDEO input terminal.

TV CBL VCR DVD

/SAT

/DTV

/LD

Select 3D NR LEVEL .

POWER

INPUT

PICTURE

O T H E R

3 D Y / C L E V E L : 3

SELECT

FREEZE

SPLIT

3 D NR L E V E L : 3

SET/

SCREEN

MODE

SUB CH

CO L OR T EMP : S T D

F L E SH T ON E : ON

ENTER

ANT

DTV

DISPLAY

AUDIO

∞

USE:

END: MENU

E X I T

Select the desired level.

ENTER

SET/

ENTER

RETURN

∞

3 D NR L E V E L :

VOL

USE:

END: MENU

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

Low noise reduction

High noise reduction

SOURCE

DTV/SAT

GUIDE

POWER

SET/

3 To adjust COLOR TEMPERATURE

ENTER

DTV/(SAT)

INFO

This function enables the image to be set to five different tones.

∞

VCR REC

FAVORITE CH

Select COLOR TEMP .

RECEIVER

POWER

INPUT

VOL

PICTURE

O T H E R

3 D Y / C L E V E L : 3

3 D NR L E V E L : 3

SET/

CO L OR T EMP : S T D

F L E SH T ON E : ON

ENTER

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

∞

USE:

END: MENU

E X I T

Select the desired tone of the image.

SET/

ENTER

∞

CO L OR T EMP :

S T D

END: MENU

USE:

NEWS ......Coolest color

LIVE ..........Cooler color

STD ..........Normal color

FILM .........Warmer color

B&W ........Warmest color

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE ADJUSTMENTS

4 To adjust FLESH TONE

By the time video signals from a broadcast station arrive at your

projection monitor (on air or cable TV), they have experienced

significant degradation.

Flesh tone reduces color noise, improves color uniformity and

corrects unnatural flesh tones to give your natural images.

NOTE:

This function cannot be used when 1080i or 480p component signals

have been input.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

Select FLESH TONE .

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

PICTURE

ANT

O T H E R

DTV

3 D Y / C L E V E L : 3

DISPLAY

AUDIO

3 D NR L E V E L : 3

SET/

CO L OR T EMP : S T D

F L E SH T ON E : ON

ENTER

∞

USE:

END: MENU

E X I T

Set FLESH TONE to ON.

ENTER

RETURN

VOL

SET/

ENTER

MUTING

∞

F L E SH T ON E :

ON O F F

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

USE:

END: MENU

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

DTV/(SAT)

INFO

After setting, press MENU to turn the

menu off.

∞

VCR REC

FAVORITE CH

RECEIVER

TV/SAT/DVD

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

WATCHING STEREO AND BILINGUAL

PROGRAMS

The multichannel TV sound (MTS) decoder enables stereo program and

Second Audio Program (SAP) to be received. (SAP is often used for a

second language). This MTS decoder can only be used if a broadcast of

stereo program or SAP is received.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

PressMENUandselect SOUND byusing

SELECT

FREEZE

SPLIT

the5or∞buttonandthenpressingSET/

SCREEN

MODE

SUB CH

ANT

ENTER. (Refer to page 24.)

DTV

DISPLAY

AUDIO

Select MTS in the same way.

SOUND

MT S : MA I N

B A S S

– 1 0

T R E B L E

B A L ANC E

ENTER

SET/

ENTER

SURROUND : O F F

SUP E R B A S S : O F F

RETURN

∞

USE:

END: MENU

E X I T

VOL

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

Select the desired audio mode.

SOURCE

DTV/SAT

GUIDE

POWER

SET/

SOUND

ENTER

DTV/(SAT)

INFO

MT S : MA I N S A P MONO

B A S S

– 1 0

∞

T R E B L E

B A L ANC E

VCR REC

FAVORITE CH

SET/

ENTER

SURROUND : O F F

RECEIVER

SUP E R B A S S : O F F

POWER

INPUT

VOL

∞

USE:

END: MENU

E X I T

MAIN

SAP

MONO

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

After setting, press MENU to turn the

menu off.

NOTES:

TV/SAT/DVD

• This function can only be used for TV input.

• Broadcast stereo and SAP reception operate in

accordance with the Broadcast Television System

Committee (BTSC) standard only. Stereo audio

transmission from CATV system can vary from area

and may not be compatible with the BTSC

standards. Check with your local cable company

for specific compatibility requirements.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

TO ADJUST THE SOUND QUALITY

BASS, TREBLE and BALANCE can be adjusted.

Press MENU and select SOUND .

(Refer to page 24.)

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

Select the adjustment item.

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

SOUND

ANT

MT S : MA I N

DTV

B A S S

– 1 0

DISPLAY

AUDIO

T R E B L E

B A L ANC E

SET/

ENTER

SURROUND : O F F

SUP E R B A S S : O F F

∞

USE:

END: MENU

E X I T

ENTER

Adjust by pressing 2 or 3 .

•

Adjustable range

RETURN

BASS, TREBLE : –30 to 30

VOL

MUTING

BALANCE

: L (Left) 30 to R (Right) 30

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOUND

MT S : MA I N

B A S S

SOURCE

– 1 0

DTV/SAT

GUIDE

T R E B L E

B A L ANC E

POWER

SET/

ENTER

SET/

SURROUND : O F F

ENTER

DTV/(SAT)

INFO

SUP E R B A S S : O F F

∞

USE:

END: MENU

E X I T

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

•

Repeat steps 2 and 3 for other items.

After adjusting, press MENU to turn the

menu off.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

TO SELECT THE DESIRED SURROUND

MODE

Surround can be selected as desired.

TV CBL VCR DVD

Press MENU and select SOUND .

(Refer to page 24.)

/SAT

/DTV

/LD

POWER

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

Select SURROUND .

ANT

DTV

DISPLAY

AUDIO

SOUND

MT S : MA I N

B A S S

– 1 0

T R E B L E

B A L ANC E

SET/

ENTER

SURROUND : O F F

SUP E R B A S S : O F F

∞

USE:

END: MENU

E X I T

ENTER

RETURN

Select the desired SURROUND mode.

VOL

MUTING

SOUND

SURROUND : SURROUND 1

SURROUND 2

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

S . S T E R E O

SET/

O F F

SOURCE

ENTER

DTV/SAT

GUIDE

POWER

SET/

∞

ENTER

USE:

END: MENU

E X I T

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

SURROUND1 ..... This is an easy way to enjoy SURROUND during

a musical program.

RECEIVER

POWER

INPUT

VOL

SURROUND2 ..... This is a way to enjoy powerful SURROUND

during a movie.

S. STEREO (Simulated STEREO)

........................... This function transforms monaural signals into

simulated stereo sound.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Use it when you wish to experience a sense of

stereo presence when listening to monaural

signal sources.

OFF .................... Turns off the surround effect.

NOTES:

• The surround effect cannot be obtained with mono

sound.

• In some cases, the surround effect may be minimal.

After setting, press MENU to turn the

menu off.

TV/SAT/DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND ADJUSTMENTS

TO ADJUST SUPER BASS

Use this function to enjoy powerful bass sounds.

Press MENU and select SOUND .

(Refer to page 24.)

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

Select SUPER BASS .

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

SOUND

ANT

MT S : MA I N

DTV

B A S S

– 1 0

DISPLAY

AUDIO

T R E B L E

B A L ANC E

SET/

ENTER

SURROUND : O F F

SUP E R B A S S : O F F

∞

USE:

END: MENU

E X I T

ENTER

Set SUPER BASS to ON.

RETURN

SOUND

VOL

MT S : MA I N

MUTING

B A S S

– 1 0

T R E B L E

B A L ANC E

SET/

ENTER

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SURROUND : O F F

SUP E R B A S S : ON O F F

SOURCE

DTV/SAT

GUIDE

∞

USE:

END: MENU

E X I T

POWER

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

After adjusting, press MENU to turn the

menu off.

RECEIVER

POWER

INPUT

VOL

TV/SAT/DVD

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

DPO FUNCTION

The sensor of the DPO (Dynamic Picture Optimizer) on the TV front panel

determines brightness and adjusts the CONTRAST, BLACK LEVEL

(brightness) and COLOR automatically.

PressMENUandselect SETUP byusing

TV CBL VCR DVD

the5or∞buttonandthenpressingSET/

/SAT

/DTV

/LD

POWER

ENTER. (Refer to page 24.)

INPUT

SELECT

FREEZE

SPLIT

Select DPO in the same way.

SCREEN

MODE

SUB CH

ANT

SET UP

DTV

CHANN E L S E T UP

DISPLAY

AUDIO

CONV E RG E NC E

PROGRAM B L OC K

SET/

DPO : O F F

ENTER

CHANG E P A S SWORD

∞

USE:

END: MENU

E X I T

ENTER

Set DPO to ON.

RETURN

SET UP

VOL

CHANN E L S E T UP

MUTING

CONV E RG E NC E

PROGRAM B L OC K

DPO : ON O F F

SET/

ENTER

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

CHANG E P A S SWORD

SOURCE

DTV/SAT

GUIDE

∞

POWER

USE:

END: MENU

E X I T

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

After setting, press MENU to turn the

menu off.

RECEIVER

POWER

INPUT

VOL

TV/SAT/DVD

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI-POINT CONVERGENCE

ADJUSTMENT

Convergence adjustment may be fined-tuned from here.

PressMENUandselect SETUP byusing

the5or∞buttonandthenpressingSET/

ENTER. (Refer to page 24.)

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

Adjust the center point convergence.

(Refer to steps 2 to 5 on pages 28 to 29.)

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Select ADJ MULTI-POINT .

SET UP

CONV E RG E NC E

NA T URA L W I D E

SET/

AD J C E N T E R PO I N T

AD J MU L T I - PO I N T

ENTER

USE:

END: MENU

E X I T

∞

ENTER

RETURN

VOL

Select the adjust point.

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

SET/

POWER

ENTER

SET/

ENTER

DTV/(SAT)

INFO

∞

S E T : S E L E C T A T PO I N T

VCR REC

USE:

END: MENU

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

Adjust the red line.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

SET/

ENTER

AD J MU L T I - PO I N T

S E T : B L U E PO I N T

∞

USE:

END: MENU

NOTES:

• The number of adjustment points varies according

to the screen mode. The cursor is partially invisible

around the edge of the screen according to the

screen mode.

• It is not possible to adjust all these points (points

of change on the cross-hatch).

• Some of the cross-hatch lines are not straight, but

this is not a malfunction. They are not always

straight on a normal TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

MULTI-POINT CONVERGENCE ADJUSTMENT

Adjust the blue line.

SET/

ENTER

TV CBL VCR DVD

/SAT

/DTV

/LD

AD J MU L T I - PO I N T

S E T : N E X T PO I N T

∞

POWER

INPUT

USE:

END: MENU

SELECT

FREEZE

SPLIT

•

The brackets which shows the adjusting point will move in

order.

SCREEN

MODE

SUB CH

ANT

DTV

Move to the next point to be adjusted, and repeat steps 4 to 6.

DISPLAY

AUDIO

After completing the convergence

adjustment, press MENU to turn the

menu off.

TV/SAT/DVD

ENTER

RETURN

VOL

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING THE SYSTEM REMOTE

CONTROL

(When operating Pioneer units with mark)

When the control terminals of Pioneer audio/video units

with the

mark are connected, these units can be oper-

ated using the Monitor's remote control unit (see pages 64

to 69).

CONTROL

OUT

To other units bearing

the Î mark.

OUT

CONTROL

NOTES:

• When the Pioneer unit with

mark is connected to the

CONTROL IN terminal of the projection monitor, the remote

sensor of the projection monitor does not accept signals from

the remote control unit. In this case, point the remote control at

the first device in the chain (the equipment with no CONTROL

IN connection).

• To connect the control cord, use the commercially available mini

plug cord (monaural).

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

To operate other manufacturers' audio/video units using the TV remote

control unit, remote control signals need to be set.

There are two methods of setting remote control signals

• For calling the other manufacturers' remote control signals preset to

this remote control unit

• For learning other manufacturers' remote control signals

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

CALLING OTHER MANUFACTURERS'

REMOTE CONTROL SIGNALS PRESET

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

Setthemodeswitchtomatchthedevice

to which you want to preset the remote

control signal.

•

Example: To select DVD/LD.

TV CBL VCR DVD

ENTER

/SAT

/DTV

/LD

RETURN

VOL

MUTING

At the same time, press the EDIT button

and number button 1.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

POWER

DTV/SAT

GUIDE

LED will begin blinking.

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

EDIT/

LEARN

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

RECEIVER

POWER

INPUT

VOL

INPUT

Select the desired manufacturer.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

•

Select from the figure on page 61.

Example: To select 24 (PHILIPS) in the LD mode.

NOTES:

• To stop the EDIT mode in the middle, press the EDIT

button once more.

• If mode switch is switched while in EDIT mode, EDIT

mode will be canceled.

• After step 1 and step 2, if you do not press the

button for one minute (no operation), the EDIT

mode will be canceled.

•

If the LED blinks rapidly when the number button has been

pressed, there has been an error. Input the number again.

After setting, you can automatically use the remote control in

the usual manner.

• If the table on page 61 does not include your desired

manufacturer or the remote control does not work,

you can make the memory learn its signal by the

learn mode (see page 62).

• The initial mode is “00” (PIONEER).

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

Manufacturer's preset remote control signals

CBL/SAT/DTV

VCR

DVD/LD

PIONEER 1

PIONEER 2

JERROLD 1

JERROLD 2

JERROLD 3

JERROLD 4

JERROLD 5

JERROLD 6

JERROLD 7

JERROLD 8

JERROLD 9

JERROLD 10

S. A. 1

S. A. 2

S. A. 3

S. A. 4

ZENITH 1

ZENITH 2

ZENITH 3

None

PIONEER

RCA 1

(CABLE)

PIONEER

FISHER

GOLD STAR

HITACHI

HITACHI 2

HITACHI 3

MAGNAVOX 2

MITSUBISHI

MITSUBISHI 2

MITSUBISHI 3

MITSUBISHI 4

MITSUBISHI 5

MITSUBISHI 6

PANASONIC

PANASONIC 2

PANASONIC 3

RCA

RCA 2

RCA 3

SANYO

SANYO 2

SANYO 3

SHARP

SHARP 2

SHARP 3

SONY (BETA)

SONY (VHS)

SONY (8mm)

TOSHIBA

JVC

PIONEER

(DVD)

PANASONIC

SAMSUNG

SONY

TOSHIBA

JVC

None

(SAT)

PIONEER

(LD)

(MDP)

(LD)

KENWOOD

PANASONIC 1

PANASONIC 2

PHILIPS

RCA

RCA 2

SONY

None

SONY

None

PIONEER

SHARP

None

(DTV)

JVC 2

JVC 3

JVC 4

JVC 5

None

ZENITH

None

Operations can be performed using remote control button with the same markings (See pages 65 to 69).

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

TO LEARN REMOTE CONTROL SIGNALS

To operate other manufacturers' remote control signals not preset using

the remote control unit, have the remote control unit learn these signals.

Example) To learn the VCR power to turn on.

TV CBL VCR DVD

Before operation:

/SAT

/DTV

/LD

TosetthemodeswitchtoVCRwhenavideocassetterecorderisconnected

POWER

(see page 14).

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

At the same time, press the LEARN

button and number button 2.

ANT

DTV

DISPLAY

AUDIO

LED will begin blinking.

EDIT/

LEARN

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

ENTER

RETURN

VOL

MUTING

Press the SOURCE POWER button to

memorize the desired operation.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

POWER

LED will remain lit.

DTV/SAT

GUIDE

SET/

ENTER

DTV/(SAT)

INFO

SOURCE

TV CBL VCR DVD

/SAT

/DTV

/LD

∞

POWER

VCR REC

FAVORITE CH

POWER

INPUT

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

• Buttons which can be learnt are as follows.

CABLE ....... SOURCEPOWER, CH(+), CH(–), CH

RETURN, CH ENTER, 1 to 9, 0

SAT ........... SOURCE POWER, CH (+), CH (–), 2,

3, 5, ∞, SET/ENTER, TV/SAT/DVD

MENU, DTV/SATGUIDE, DTV/(SAT)

INFO, CH ENTER, 1 to 9, 0

DTV........... SOURCE POWER, BLUE, GREEN,

RED, YELLOW, 2, 3, 5, ∞, SET/

ENTER, DTV/DVD TOP MENU, CH

(+), CH (–), 1 to 9, 0, CH ENTER, •

(DOT), SCREEN MODE, DTV

AUDIO, CH RETURN, DTV (SAT)

INFO, DTV/SAT GUIDE, ANT

Facetheremotecontrolunitoftheother

manufacturer's and the remote control

unit of the Monitor to each other, and

press the POWER button of the remote

control unit of the other manufacturer's.

Leave about 0.8 to 2.0 inch (2 to 5 cm) between the two remote

control units.

If you learn how to use the remote control unit you can adjust the

distance of the remote control units.

VCR........... SOURCE POWER, CH (+), CH (–), 8,

0.8 to 2.0 inch

(2 to 5 cm)

1, 7, 3, ¡, ¶ (VCR REC)

DVD .......... SOURCE POWER, ¢, 4, 8, 1,

7, 3, ¡, 2, 3, 5, ∞, SET/ENTER,

TV/SAT/DVDMENU, DTV/DVDTOP

LD ............. SOURCE POWER, ¢, 4, 8, 1,

7, 3, ¡

• CABLE/SAT/DTVandDVD/LDcannotbeselected

at the same time.

LED will blink.

• If blinks once, return to

step2forotherbuttons.

• Flashes four times, it

indicates an error has

occurred.

(VCR)

POWER

TV CBL

/SAT

/DTV

POWER

INPU

•

This ends learn.

Repeat steps 2 and 3 for learning pertaining to other VCR

devices.

If the remote control unit’s LED blink four times, it means that

learning capacity has reached its maximum and no more

learning will be possible.

When the LEARN button is pressed, the

remote control unit return to normal

states.

NOTES:

• To stop using the LEARN mode in the middle, press

the LEARN button again.

• If mode switch is switched while in LEARN mode,

LEARN mode will be canceled.

EDIT/

LEARN

• After steps 1 and 2, if you do not press the button

for one minute (no operation), the LEARN mode

will be canceled.

• To reset the learn setting, have the LED blinking as

in step 1 and then keep the remote control unit’s

TV POWER button pressed for at least 2 seconds.

• There are some remote controls which cannot

learn.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

USING THE TV REMOTE

CONTROL UNIT TO CONTROL

OTHER DEVICES

Transmitting LED

TV CBL VCR DVD

/SAT

/DTV

/LD

REMOTE CONTROL UNIT SETTING BUTTONS

POWER

INPUT

1 EDIT/LEARN button

SELECT

FREEZE

SPLIT

EDIT:

When the EDIT/LEARN button is pressed at the

same time as number button 1, the mode will

change to preset code edit mode. (See page

60.)

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

LEARN: When the EDIT/LEARN button is pressed at the

same time as number button 2, the unit’s

capability to learn and store command codes

fromotherremotecontrolunitswillbeactivated.

(See page 62.)

2 Mode switch

ENTER

Use to switch the remote control unit modes.

RETURN

VOL

RECEIVER CONTROL BUTTONS

MUTING

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

When a Pioneer receiver is connected to the Monitor, the

receiver can be operated using buttons 3 to 5.

Whenanothercompany’sreceiverisconnectedtotheMonitor,

have the signals for 3 to 5 learned (see page 62).

SOURCE

DTV/SAT

GUIDE

POWER

SET/

ENTER

DTV/(SAT)

INFO

∞

3 RECEIVER POWER button (STANDBY/ON)

VCR REC

FAVORITE CH

Turns receiver power on and off.

RECEIVER

4 RECEIVER INPUT button

POWER

INPUT

VOL

Selects the input source connected to the receiver.

5 RECEIVER VOL (volume) +, - buttons

Adjusts receiver volume level.

Press the plus button (+) to increase the volume and the

minus button (-) to decrease it.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

6 (RECEIVER) MUTING button

Allows the receiver’s mute signal to be learned.

This button is used when the mode switch has been set to

something other than TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

CABLE CONTROL BUTTONS

Mode switch

CABLE, SAT and DTV cannot be selected at the same time.

When the mode switch is set to CBL/SAT/DTV the cable

converter connected to the Monitor can be operated using the

buttons 1 to 5.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

Cable converters which are made by other makers and are

not preset can also be operated using the remote control unit

if buttons 1 to 5 have learnt the functions (see page 62).

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

1 Direct channel selection buttons

ANT

Press the button (or buttons) that corresponds to the

channel that you wish to watch.

DTV

DISPLAY

AUDIO

2 CH (channel) +, – buttons

Press plus (+) or minus (–) to tune in a higher or lower

channel.

3 SOURCE POWER button

Turns the power of the cable converter on and off.

ENTER

4 CH ENTER button *

Fix the selected channel with the direct channel selection

buttons.

RETURN

VOL

MUTING

5 CH RETURN (channel return) button *

Press to switch between the current channel and the

channel you were watching immediately before.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SOURCE

POWER

DTV/SAT

GUIDE

* Some manufacturers do not preset CH ENTER and CH

RETURN. Use these buttons to learn if necessary.

SET/

ENTER

DTV/(SAT)

INFO

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

SAT CONTROL BUTTONS

Mode switch

CABLE, SAT and DTV cannot be selected at the same time.

When SAT is preset by REMOTE CODE SET UP, the remote

control unit buttons will function as shown below.

TV CBL VCR DVD

/SAT

/DTV

/LD

•

When a satellite broadcast tuner is connected to the

Monitor, press the input selector button that has the same

number as the connected input terminal and set the mode

switch to CBL/SAT/DTV.

POWER

INPUT

SELECT

FREEZE

SPLIT

The tuner can be operated using buttons 1 to 7.

Satellitebroadcasttunerswhicharemadebyothermakers

and are not preset can also be operated with the remote

control unit if buttons 1 to 7 have learnt the functions

(see page 62).

SCREEN

MODE

SUB CH

•

ANT

DTV

DISPLAY

AUDIO

1 Direct channel selection buttons

Press the button (or buttons) that corresponds to the

channel that you wish to watch.

2 SOURCE POWER button

Turns the power of the SAT (digital satellite system tuner)

on and off.

ENTER

3 Select/Set buttons (SET/ENTER, 2, 3, 5, ∞)

2, 3, 5, ∞: Press the button to select items on the SAT

GUIDE screen or SAT MENU screen.

RETURN

VOL

MUTING

SET/ENTER: Press to activate the selected function.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

4 CH ENTER button

Fix the selected channel with the direct channel selection

buttons.

SOURCE

POWER

DTV/SAT

GUIDE

•

Use this button to learn if necessary.

SET/

ENTER

DTV/(SAT)

INFO

5 SAT MENU button

∞

VCR REC

FAVORITE CH

When this button is pressed, the satellite broadcasting

menu screen will be displayed.

RECEIVER

POWER

INPUT

VOL

6 SAT GUIDE button

When this button is pressed, the satellite broadcasting

guide screen will be displayed.

7 SAT INFO button

When this button is pressed, information on satellite

broadcasting will be displayed.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

•

Use this button to learn if necessary.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

DTV CONTROL BUTTONS

Mode switch

CABLE, SAT and DTV cannot be selected at the same time.

When a digital tuner is connected to the Monitor, set the mode

switch to CBL/SAT/DTV. The tuner can be operated using

buttons 1 to -.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

1 SCREEN MODE button

Press to select the SCREEN MODE.

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

2 DTV AUDIO button

ANT

Press to select the audio mode during multiaudio

broadcasts.

DTV

DISPLAY

AUDIO

3 Direct channel selection buttons

Press the button (or buttons) that corresponds to the

channel that you wish to watch.

button

Used in channel selection.

ENTER

5 CH (channel) +, – button

Press plus (+) or minus (–) to tune in a higher or lower

channel.

RETURN

VOL

MUTING

6 Select/Set buttons (SET/ENTER, 2, 3, 5, ∞)

2, 3, 5, ∞: Press the button to select items on the DTV

MENU screen.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

SET/ENTER: Press to activate the selected function.

SOURCE

POWER

DTV/SAT

GUIDE

7 FAVORITE CH/Colored (blue, green, red and yellow)

buttons

SET/

ENTER

DTV/(SAT)

INFO

FAVORITE CH: Used for making FAVORITE CH settings

with the digital tuner.

Blue, Green, Red, Yellow:

∞

VCR REC

FAVORITE CH

Used to make selections from the digital

tuner menu.

RECEIVER

POWER

INPUT

VOL

8 CH RETURN (channel return) button

Press to switch between the current channel and the

channel you were watching immediately before.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

9 DTV MENU button

When this button is pressed, the DTV menu screen will be

displayed.

0 DTV GUIDE button

When this button is pressed, the DTV guide screen will be

displayed.

- DTV INFO button

When this button is pressed, information on DTV will be

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

VCR CONTROL BUTTONS

Mode switch

If the VCR is preset by REMOTE CODE SET UP, the remote

control unit button will function as follows when the mode

switch of the remote control unit is set to VCR.

When the input selector button having the same number as

the input terminal connecting the VCR is pressed, the VCR can

be operated using buttons 1 to 8.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

INPUT

VCR which are made by other makers and are not preset can

also be operated using the remote control unit if buttons 1 to

8 have learnt the functions (see page 62).

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

1 CH (channel) +, – buttons

DTV

Press to select the channel of the TV tuner on the VCR.

DISPLAY

AUDIO

2 SOURCE POWER button

Turns the power of the VCR on and off.

3 8 (PAUSE/STILL) button

Set pauses and still pictures.

4 1 (REW) button

ENTER

Rewinds the tape and allows picture search.

5 7 (STOP) button

RETURN

Stop the tape transport.

VOL

MUTING

6, 8 VCR REC (record) button

Press both buttons at the same time to start recording.

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

7 ¡ (FF) button

SOURCE

POWER

DTV/SAT

GUIDE

Rapidly advances the tape and allows picture search.

SET/

ENTER

DTV/(SAT)

INFO

8 3 (PLAY) button

Selects playback.

∞

VCR REC

FAVORITE CH

RECEIVER

POWER

INPUT

VOL

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CODE SET UP

DVD/LD CONTROL BUTTONS

Mode switch

DVD and LD cannot be selected at the same time.

If the DVD/LD is preset by REMOTE CODE SET UP, the remote

control unit button will function as follows when the mode

switch of the remote control unit is set to DVD/LD.

TV CBL VCR DVD

/SAT

/DTV

/LD

POWER

When the input selector button having the same number as

the input terminal connecting a DVD player or LD player is

pressed, these players can be operated using buttons 1 to -

(buttons 7 to 9 are for DVD players only).

DVD player/LD player which are made by other makers and

are not preset can also be operated using the remote control

unit if buttons 1 to - have learnt the functions (see page 62).

INPUT

SELECT

FREEZE

SPLIT

SCREEN

MODE

SUB CH

ANT

DTV

DISPLAY

AUDIO

1 ¢ (CHAPTER SEARCH) button

Pressing quickly once takes you to the start of the next

chapter. Each time you press it, you move ahead to the

start of the next chapter.

2 4 (CHAPTER SEARCH) button

Pressing quickly once takes you to the start of the chapter

currently playing. Each time you press it, you move back

to the start of the previous chapter.

ENTER

RETURN

3 SOURCE POWER button

VOL

MUTING

Turns the power of the DVD/LD player on and off.

4 8 (PAUSE/STILL) button

EDIT/

LEARN

TV/SAT/DVD

DTV/DVD TOP

Set pauses and still pictures.

SOURCE

POWER

DTV/SAT

GUIDE

5 1 (SCAN) button

Continue pressing to rewind.

SET/

ENTER

DTV/(SAT)

INFO

6 7 (STOP) button

∞

VCR REC

FAVORITE CH

Playback is stopped when pressing once.

With some DVD/LD players, pressing the button twice may

open the disc tray.

RECEIVER

POWER

INPUT

VOL

7 DVD MENU button (DVD only)

When this button is pressed, the DVD menu will be

displayed.

8 DVD TOP MENU button (DVD only)

When this button is pressed, the DVD top menu will be

displayed.

PROJECTION MONITOR RECEIVER

REMOTE CONTROL UNIT

9 Select/Set buttons (SET/ENTER, 2, 3, 5, ∞) (DVD only)

2, 3, 5, ∞: Press the button to select items on the DVD

MENU screen.

SET/ENTER: Press to activate the selected function.

0 ¡ (SCAN) button

Continue pressing for fast forward.

- 3 (PLAY) button

Selects playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU INDEX

Main menu (See page 24)

PICTURE adjustment menu (See page 46)

PICTURE

SOUND

SCREEN

PICTURE

MOD E : S T D

CON T RA S T

B L A C K L V L .

CO L OR

SET UP

T I N T

SHARP

USE:

O T H E R

END: MENU

USE:

END: MENU

E X I T

PICTURE

O T H E R

3 D Y / C L E V E L : 3

3 D NR L E V E L : 3

CO L OR T EMP : S T D

F L E SH T ON E : ON

USE:

END: MENU

E X I T

SOUND adjustment menu (See page 52)

SOUND

MT S : MA I N

B A S S

T R E B L E

B A L ANC E

SURROUND : O F F

SUP E R B A S S : O F F

USE:

END: MENU

E X I T

SCREEN setting menu (See page 37)

SCREEN

NA T URA L W I D E

V . POS I T I ON : NO T US E D

USE:

END: MENU

E X I T

SET UP menu (See page 26)

Closed Caption menu (See page 40)

SET UP

CHANN E L S E T UP

CONV E RG E NC E

PROGRAM B L OC K

DPO : O F F

C C : O F F

MOD E : C C – 1

CHANG E P A S SWORD

USE:

END: MENU

E X I T

USE:

END: MENU

E X I T

Download from Www.Somanuals.com. All Manuals Search And Download.

MENU INDEX

CHANNEL SET UP menu (See page 26)

AUTO CHANNEL PRESET menu (See page 26)

SET UP

CHANN E L S E T UP

AU T O CHANN E L PR E S E T

CHANN E L ADD / D E L

F A VOR I T E CHANN E L

AU T O CHANN E L PR E S E T

AN T E NNA : A

T V / C A B L E MOD E :

A I R

AU T O PR E S E T S T AR T

USE:

END: MENU

USE:

END: MENU

E X I T

CONVERGENCE menu (See pages 28 and 57)

CHANNEL ADD/DEL menu (See page 41)

SET UP

CONV E RG E NC E

NA T URA L W I D E

C I N EMA W I D E

Z OOM

CHANN E L ADD / D E L

AN T E NNA : A

CHANN E L : 1 2 3

S E T T I NG : ADD

L A B E L : A B CD

F U L L AND 4 : 3 NORMA L

F U L L F OR HD

USE:

END: MENU

USE:

END: MENU

E X I T

FAVORITE CHANNEL menu (See page 44)

SET UP

F A VOR I T E CHANN E L

CONV E RG E NC E

NA T URA L W I D E

B L U E

GR E E N

R E D

AD J C E N T E R PO I N T

AD J MU L T I - PO I N T

Y E L L OW

USE:

END: MENU

E X I T

USE:

END: MENU

E X I T

PROGRAM BLOCK menu (See page 31)

SET UP

PROGRAM B L OC K

I NPU T YOUR P A S SWORD

USE:

END: MENU

E X I T

CHANGE PASSWORD menu (See page 34)

SET UP

CHANG E P A S SWORD

I NPU T YOUR P A S SWORD

USE:

END: MENU

E X I T

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with the Monitor,

check the points below. Sometimes the trouble may lie in another component. Investigate the other component and electrical

appliances being used.

If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or

your dealer to carry out repair work.

SYMPTOM

CAUSE/REMEDY

PAGES

The power will not turn on

The power plug is disconnected.

The MAIN POWER switch is not turned on.

The Monitor is inoperative

Press the RETURN button.

External influences such as lightning and static electricity may

prevent the Monitor from operating normally. In such cases, turn

on/offtheMAINPOWERsupply, disconnectthepowercord, connect

it again a few minutes later, and try operating the Monitor.

A TV broadcast station cannot be

received

The antenna cable is not connected properly.

The antenna cable is broken or shorted.

Channels have not been preset correctly.

No picture appears on the screen

The DVD/LD player or VCR is not connected and operated properly.

The input selector has not been set to the desired input source

(such as DVD/LD player and VCR).

No sound

The MUTING button has been on (volume indicator becomes red).

The Monitor cannot be operated using

the remote control unit

Thebatteriesinthebatterycompartmentarenotcorrectlymatching

the (+ and –) polarities.

The battery has worn out.

Strong lights striking the remote control sensor may cause the

internal microcomputer to malfunction.

The color is not normal

The color is too dim or too sharp

The color is uneven

Adjust the picture quality.

The room is too bright.

Adjust the color convergence.

28 and 57

Picturedoesnotappearimmediatelyafter

changing channels

TV-CATV MODE is set incorrectly.

Check the CC menu settings. (As at October 1, 1999, limited closed caption information is

broadcasted in field 1. The closed caption information that will be broadcasted in field 2 in

the future may not be decoded with this unit).

Closed caption is not displayed

The character information is not displayed normally during special playback, such as slow

and still play, of the VCR or Videodisc player.

Closed caption signal may not be output depending on the VCR, Videodisc player or other

components (for details, please consult the manufacturer of your unit).

Check that the video cassette, Videodisc or broadcasting being played contains closed caption

data (The video cassette and Videodisc containing closed caption data carries the CC mark

etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

The following symptoms may be mistakenly regarded as malfunctioning.

In many cases, they are not the faults of the Monitor.

SYMPTOM

CAUSE

When there are 2 or 3 layers of images

(ghost phenomenon)

Influence of waves from the broadcast stations reflected by nearby mountains and

high-rise buildings.

Spots appears on the screen

Noises are audible

Influence of harmful waves produced by motor equipments such as hair dryers

andvacuumcleaners, ignitiondevicessuchascarsandmotorbikes, flashingdevices

such as thermostats and electricity discharge by transmission/distribution lines.

Stripes appears on the screen

Noises are audible

Mixing of electric waves from TV stations FM stations, amateur wireless, public

wireless (simple wireless), etc., or nearby personal computer, TV, VCR, audio

equipment.

When a crack sound is heard some time

after the power is turned on

Sometimes, creaking sounds will be produced when cabinets expand or contract

due to changes in the surrounding temperature. Do not suspect a fault.

The power goes off momentarily, after a

sudden pop sound

The power was turned off momentarily due to the protection circuit to correct the

electric discharge phenomenon in the CRT. Do not suspect fault.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

Display and amplifier section

Electrical section, miscellaneous

Reception system ........American TV standard NTSC system

Screen size ................................................. 58" (SD-582HD5)

53" (SD-532HD5)

CRT .....................................................7" High focus CRT x 3

Brightness (White peak)....... 480 Foot-Lambert (SD-582HD5)

580 Foot-Lambert (SD-532HD5)

Power requirements .....................................120 V AC, 60 Hz

Power consumption ............................. 310 W, 575 VA (CSA)

External dimensions

SD-582HD5 ................. 1378 (W) x 661 (D) x 1351 (H) mm

54-1/4 (W) x 26 (D) x 53-3/16 (H) inch

SD-532HD5 ................. 1268 (W) x 626 (D) x 1289 (H) mm

49-15/16 (W) x 24-11/16 (D) x 50-3/4 (H) inch

[White window signal input contrast Max.]

without protective screen

Horizontal resolution ...... More than 1000 lines (SD-582HD5)

More than 1000 lines (SD-532HD5)

[Input digital test pattern (1000 lines resolution)]

Input terminals ............................................... 4 video inputs

4 S-VIDEO input jacks (Y/C separate INPUT)

2 COMPONENT VIDEO INPUT jacks (Y, P^B, PR)

4 audio inputs

Weight of main unit

SD-582HD5 ........................................131 kg (289 lb 3 oz)

SD-532HD5 ........................................121 kg (267 lb 2 oz)

Wireless remote control unit

Mini D-sub 15 pin INPUT jack (RGB)

Output terminals .................................................. MONITOR

Input terminal signal ratings

Operation system .................Infrared remote control system

Power source ............. Two DURACELL "AA" MN1500 1.5 V

ALKALINE dry cell batteries

Dimensions ........................ 66 (W) x 24.6 (H) x 226.5 (D) mm

2-19/32 (W) x 31/32 (H) x 8-29/32 (D) inch

Input signal

Video signal:

Composite and S-VIDEO (Y): 1.0 Vp-p (75 ohms load)

Weight ................................... 170 g (4 oz) (without batteries)

COMPONENT

(Y): 1.0 Vp-p (75 ohms load)

(P^B, PR): 0.7 Vp-p (75 ohms load)

(RGB): 0.7 Vp-p (75 ohms load)

Mini D-sub 15 pin

Accessories

Audio signal (including CENTER): 400mV rms

Input impedance .............................. Video input: 75 ohms

Audio input (including CENTER): 22 kilo-ohms

or more

Input signal polarity (Video) .......... Synchronized negative

Output terminal signal ratings

Output signal .............Video signal: 1 Vp-p (75 ohms load)

Audio signal: 500 mV rms (100 % modulation)

Output impedance .........................Video output: 75 ohms

Audio output: Less than 1 kilo-ohms

Operating instructions ........................................................ 1

Warranty card ..................................................................... 1

Remote control unit ............................................................ 1

DURACELL "AA" MN1500 1.5V

Alkaline dry cell batteries .................................................... 2

NOTE:

Effective output

Specifications and design are subject to possible modifications

without notice due to improvements.

Front both channels driven ............................... 10 W + 10 W

(THD. 1 % 1 kHz, 8 ohms)

Built-in speaker system.......... 16 cm (6-5/16 in) full range x 2

Tuner section

Circuit type ........................................Video signal detection:

PLL full synchronous detection

PLL digital synthesizer system

Audio multiplex: BTSC system

Reception channels ........VHF; CH2~CH13, UHF; CH14~CH69

CATV (STANDARD, IRC or HRC)

CATV 1-125 CH

Antenna terminals

..................................... Antenna terminal, 75 ohms UNBAL,

F-type connector (VHF, UHF MIXED)

Download from Www.Somanuals.com. All Manuals Search And Download.

Download from Www.Somanuals.com. All Manuals Search And Download.

Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer

Authorized Independent Service Company, or if you wish to purchase replacement parts,

operating instructions, service manuals, or accessories, please call the number shown

below.

8 0 0 – 4 2 1 – 1 4 0 4

Please do not ship your product to Pioneer without first calling the Customer Service

Department at the above listed number for assistance.

PIONEER ELECTRONICS SERVICE, INC.

CUSTOMER SERVICE DEPARTMENT

P.O. BOX 1760, LONG BEACH,

CA 90801-1760, U.S.A.

For warranty information please see the Limited Warranty sheet included with your product.

Should this product require service in Canada, please contact a Pioneer Canadian Authorized

Dealer to locate the nearest Pioneer Authorized Service Company in Canada.

Alternatively, please contact the Customer Service Department at the following address:

Pioneer Electronics of Canada, Inc.

Customer Service Department

300 Allstate Parkway, Markham, Ontario

L3R 0P2

(905) 479-4411

1-877-283-5901

For warranty information please see the Limited Warranty sheet included with your product.

Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisée

Pioneer au Canada pour obtenir le nom de la Société de Service Autorisée Pioneer le plus

près de chez vous. Ou encore, veuillez vous communiquer avec le Service de Clientèle de

Pioneer:

Pioneer électroniques du Canada, Inc.

Département de service au consommateurs

300 Allstate Parkway, Markham, Ontario

L3R 0P2

(905) 479-4411

1-877-283-5901

Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la

Garantie Limitée gui accompagne le produit.

Published by Pioneer Corporation.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS [USA] INC. P.O. BOX 1540, Long Beach, California 90801-1540

PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada

PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11

PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300

PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90

<99I00SF0W00>

Printed in Japan <ARB1528-A>

Download from Www.Somanuals.com. All Manuals Search And Download.

Pelco Camera Lens 12FA12C User Manual
Philips Cassette Player Stereo Radio Cassette Recorder User Manual
Philips Stereo System FW V39 User Manual
Philips VCR VR250 User Manual
Pioneer Flat Panel Television PDP 434HDE User Manual
Planar Computer Monitor ND1750 User Manual
Porter Cable Power Screwdriver 6640 User Manual
Precision Power Stereo Amplifier D1000 1 User Manual
ProForm Home Gym PFEL29222 User Manual
ProForm Treadmill PFTL989081 User Manual