PLASMA DISPLAY
PRO-1000HD
PRO-800HDI
I
RegisterYour Product on
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety and operating
instructions should be read before the product is
operated.
RETAIN INSTRUCTIONS — The safety and operating
instructions should be retained for future
reference.
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
CLEANING — Unplug this product from the wall outlet
before cleaning. The product should be cleaned
only with a polishing cloth or a soft dry cloth. Never
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
cabinet.
GROUNDING OR POLARIZATION
÷
OBJECT AND LIQUID ENTRY — Never push objects
of any kind into this product through openings as
they may touch dangerous voltage points or short-
out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
polarized plug.
If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding type
power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the grounding
type plug.
÷
÷
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen
into the product.
÷
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
÷
÷
If the product has been exposed to rain or water.
If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation.
If the product has been dropped or damaged in
any way.
POWER-CORD PROTECTION — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the product.
OUTDOOR ANTENNA GROUNDING — If an outside
antenna or cable system is connected to the
product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA
70, provides information with regard to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING — For added protection for this product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the product due to lightning and power-line
surges.
POWER LINES — An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
WATER AND MOISTURE — Do not use this product
near water — for example, near a bathtub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
÷
÷
When the product exhibits a distinct change in
performance — this indicates a need for service.
REPLACEMENT PARTS — When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
SAFETY CHECK — Upon completion of any service
or repairs to this product, ask the service technician
to perform safety checks to determine that the
product is in proper operating condition.
HEAT — The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the product and
cart combination to overturn.
WALL OR CEILING MOUNTING — The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
VENTILATION — Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should
not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have
been adhered to.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
POWER SOURCES — This product should be operated
only from the type of power source indicated on
the marking label. If you are not sure of the type
of power supply to your home, consult your
product dealer or local power company.
LOCATION — The appliance should be installed in a
stable location.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
NONUSE PERIODS — The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
Figure A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
ii
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
FEDERAL COMMUNICATIONS COMMISSION
DECLARATION OF CONFORMITY
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Product Name: Plasma Display
Model Number: PRO-1000HDI / PRO-800HDI
Product Category: Class B Personal Computers & Peripherals
Responsible Party Name: PIONEER ELECTRONICS [USA] INC. Customer Support Division
Address: P.O. BOX 1760, LONG BEACH, CA., 90801-1760 U.S.A.
Phone: (800)421-1625
URL
Please do not ship your product to Pioneer without first calling the Customer Support Division at the above listed
number for assistance.
Pioneer Electronics [USA] Inc.
Customer Support Division
P. O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.
iii
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you very much for purchasing this PIONEER
product.
Notes on Installation Work:
This product is marketed assuming that it is installed by qualified
personnel with enough skill and competence. Always have an
installation specialist or your dealer install and set up the product.
PIONEER cannot assume liabilities for damage caused by
mistake in installation or mounting, misuse, modification or a
natural disaster.
Before using your Plasma Display, please carefully read
the “Safety Precautions” and these “Operating
Instructions” so you will know how to operate the
Plasma Display properly. Keep this manual in a safe
place. You will find it useful in the future.
Note for Dealers:
After installation, be sure to deliver this manual to the customer
and explain to the customer how to handle the product.
Contents
Display Panel Adjustments ................ 27
Safety Precautions ................................. i
Adjusting the Picture Quality ................................ 27
Adjusting the Image Position and Clock
Before Proceeding................................. 2
How to Use This Manual ......................................... 2
Checking Supplied Accessories.............................. 3
(Automatic Adjustment) ....................................... 28
Manual Adjustment of Screen Position and
Clock ...................................................................... 28
Part Names and Functions ................... 4
Main Unit .................................................................. 4
Remote Control Unit................................................ 5
Connection Panel ..................................................... 6
Other Operations ................................ 30
Rewriting the Input Display (INPUT LABEL) ........ 30
Changing the Color Temperature
(COLOR TEMP) ...................................................... 31
Reducing Video Noise (DIGITAL NR).................... 31
Setting the PureCinema mode ............................. 32
Viewing a Fast Moving Picture
(3D Y/C MODE) ...................................................... 32
Viewing in a Bright Location
(HIGH CONTRAST) ................................................ 33
Power Control Function ........................................ 33
AUTO FUNCTION .................................................. 34
Audio Output (AUDIO OUT).................................. 34
Installation and Connections ............... 8
Installation of the Unit ............................................. 8
About the Input Connectors on this Unit ............... 9
Connection to INPUT1 and INPUT2 ....................... 9
Connection to INPUT3 ........................................... 13
Connection to INPUT4 ........................................... 13
Connection to INPUT5 ........................................... 13
About DTV Set Top Box Connection .................... 14
Audio Connections ................................................ 14
Control Cord Connection ...................................... 16
Power Cord Connection ........................................ 16
How to Route Cables ............................................. 17
Additional Information ....................... 35
Cleaning.................................................................. 35
Troubleshooting ..................................................... 35
Specifications ......................................................... 38
Supplement 1 ......................................................... 39
Supplement 2 ......................................................... 41
Supplement 3 ......................................................... 41
Supplement 4 ......................................................... 42
Explanation of Terms............................................. 42
Setting Up the System ....................... 18
Setup after Connection (INPUT1, 2) ..................... 18
Setup after Connection (INPUT5) ......................... 20
Operations ........................................... 22
Selecting an Input Source ..................................... 22
Screen Size Selection ............................................ 24
Partial Image Enlargement (POINT ZOOM) ......... 25
Automatic Power OFF ........................................... 26
1
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Proceeding
How to Use This Manual
The remainder of the sections in this manual is dedicated
to the basic operations associated with selecting a source
component up to the more complex operations
associated with adjusting the plasma display picture to
match the requirements of specific components and
personal preferences.
This manual is set up to follow the course of actions and
operations in the order that would seem most logical for
someone setting up this unit.
Once the unit has been taken out of the box, and it has
been confirmed that all the parts have been received, it
may be beneficial to look over the section “Part Names
and Functions” starting on page 4 to become acquainted
with the plasma monitor and remote control unit, as their
respective buttons and controls will be referred to
throughout this manual.
About operations in this manual
Operations in this manual are outlined in step by step
numbered procedures. Most of the procedures are
written in reference to the remote control unit unless the
button or control is only present on the main unit.
However, if a button or control on the main unit has the
same or similar name as that on the remote control unit,
that button can be used when performing operations.
The section “Installation and Connections” starting on
page 8 covers all the necessary points regarding
installation of the plasma display and connections to a
wide variety of components.
The section “Setting Up the System” starting on page 18
covers the necessary on-screen menu settings to
establish correct linkage between the plasma display and
connected components. Depending on the connections
made, this section may or not be necessary.
Note
The screen displays depicted in this manual represent typical
display examples.
The actual items and contents seen in screen displays may vary
depending on input source and specific settings.
Screen Displays
The example screen displays provided in this manual are
those for the PRO-1000HDI model. The PRO-800HDI
display differs as shown:
Example of PRO-800HDI Screen Display:
÷ The PRO-800HDI screen display fills the display area in
both horizontal directions.
Example of PRO-1000HDI Screen Display:
÷ The PRO-1000HDI screen display has a non-
displaying border at each side of the display.
MAIN MENU
INPUT1
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
0
6 0
6 0
6 0
0
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
0
6 0
6 0
6 0
0
+
+
+
+
+
+
0
RE S ET
0
RE S ET
SET
MENU
SELECT
ENTER
EXIT
SET
MENU
SELECT
ENTER
EXIT
Please note that the actual contents displayed are the
same for both the PRO-1000HDI and PRO-800HDI.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft is a registered trademark of Microsoft Corporation.
NEC and PC-9800 are trademarks of NEC Corporation.
VESA and DDC are registered trademarks of Video Electronics Standards Association.
Power Management and Sun Microsystems are registered trademarks of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Co., Inc.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
2
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Proceeding
The following example is an actual operation that shows
how one might set the horizontal and vertical positions of
the screen. The screens shown at each step are provided
as a visual guide to confirm that the procedure is
Checking Supplied Accessories
Check that the following accessories were supplied.
proceeding as it should. Please familiarize yourself with this
process before continuing on with the rest of this manual.
1
Power cord
1 Press MENU to display the menu screen.
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
+
+
+
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
2
Remote control unit
0
RE S ET
SET
MENU
SELECT
ENTER
EXIT
2 Press 3 to select SCREEN.
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
:
:
POS I T I ON
0
0
/
/
0
0
3
4
5
AA (R6) batteries (x 2)
CL OCK / PHAS E
RE S ET
SET
MENU
SELECT
ENTER
EXIT
Cleaning cloth (for wiping front panel)
3 Press 5/∞ to select the item to be adjusted.
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
:
:
POS I T I ON
CL OCK / PHAS E
0
0
/
/
0
0
RE S ET
Speed clamps (x 2)
SET
MENU
SELECT
ENTER
EXIT
4 Press SET to display the adjustment screen for the
selected item.
6
Bead bands (x 2)
:
:
H. POS I T I ON
V. POS I T I ON
0
0
÷ Operating Instructions
÷ Warranty
MENU
SET
EXIT
SET
ADJUST
5 Press 5/∞/2/3 to adjust the value.
3
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Main Unit
Operation panel on the main unit
3
Main unit
4
5
6
7
8
9
1
2
Main unit
1 STANDBY/ON indicator
5 MENU button
This indicator is red during standby mode, and turns
to green when the unit is in the operation mode
(page 22).
Press to open and close the on-screen menu (pages
18 to 34).
Flashes green when Power-Management function is
operating (page 26).
The flashing pattern is also used to indicate error
messages (page 37).
6 ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various
settings on the unit.
Usage of cursor buttons within operations is clearly
indicated in the on-screen display (pages 18 to 34).
2 Remote control sensor
Point the remote control toward the remote sensor to
operate the unit (page 6).
7 SET button
Press to adjust or enter various settings on the unit
(pages 18 to 34).
Operation panel on the main unit
8 SCREEN SIZE button
Press to select the screen size (page 24).
3 STANDBY/ON button
Press to put the display in operation or standby mode
(page 22).
9 AUTO SET UP button
When using computer signal input, automatically sets
the POSITION and CLOCK/PHASE to optimum values
(page 28).
4 INPUT button
Press to select input (page 22).
4
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Remote Control Unit
1 SCREEN SIZE button
Press to select the screen size (page 24).
2 INPUT buttons
7
8
1
2
Use to select the input (page 22).
3 MENU button
9
Press to open and close the on-screen menu
(pages 18 to 34).
4 ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various settings on the
unit.
Usage of cursor buttons within operations is clearly indicated at the
bottom the on-screen menu display (pages 18 to 34).
3
4
5
0
5 SET button
Press to adjust or enter various settings on the unit (pages 18 to 34).
6 MUTING button
Press to mute the volume (page 23).
-
6
7 AUTO SET UP button
When using computer signal input, automatically sets the POSITION
and CLOCK/ PHASE to optimum values (page 28).
8 STANDBY/ON button
Press to put the unit in operation or standby mode (page 22).
When handling the remote control unit
9 DISPLAY button
¶ Do not drop or shake the remote control.
Press to view the unit’s current input and setup mode (page 23).
¶ Do not use the remote control unit in a location
subject to direct sunlight, heat radiation from a
heater, or in a place subject to excessive
humidity.
0 POINT ZOOM button
Use to select and enlarge one part of the screen (page 25).
¶ When the remote control unit’s batteries begin
to wear out, the operable distance will gradually
become shorter. When this occurs, replace all
batteries with new ones as soon as possible.
- VOLUME (+/–) buttons
Use to adjust the volume (page 23).
Inserting the batteries in the
remote control unit
CAUTION
¶ Insert batteries so that the plus (+) and minus (–) sides are
aligned according to the markings in the battery case.
¶ Do not mix new batteries with used ones.
¶ The voltage of batteries may differ even if they are the same
shape. Please do not mix different kinds of batteries
together.
While pressing down lightly, slide
in the direction of the arrow.
¶ When not using the remote control unit for a long period of
time (1 month or more), remove the batteries from the
remote control unit to prevent leaking of battery fluid. If
battery liquid has leaked, thoroughly wipe the inside of the
case until all liquid is removed, and then insert new batteries.
¶ Do not charge, short, disassemble or throw the provided
batteries in a fire.
Two AA (R6)
batteries
When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.
H048 En
5
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
5 INPUT1 (mini D-sub 15 pin)
For connection of components that have RGB or
component output jacks such as a personal
computer, DVD player, or external RGB decoder.
Make sure that the connection made corresponds to
the format of the signal output from the connected
component (pages 9 to 12).
Connection Panel
The connection panel is provided with four video input
terminals and two video output terminals. Audio input and
speaker output terminals are also provided, together with
a CONTROL IN/OUT connector for connecting to
PIONEER components bearing the Î mark.
6 OUTPUT (INPUT1) (mini D-sub 15 pin)
Use the OUTPUT (INPUT1) terminal to output the
video signal to an external monitor or other
component.
For instructions regarding connections, consult the pages
noted in parentheses by each item.
1 SPEAKER (R) terminal
Note: The video signal will not be output from the
OUTPUT (INPUT1) terminal when the main power of
this unit is off or in standby mode.
(page 11)
For connection of an external right speaker.
Connect a speaker whose impedance is 8 –16 Ω
(page 14).
2 CONTROL IN/OUT (monaural mini jacks)
For connection of PIONEER components that bear the
Î mark. Making CONTROL connection enables
control of this unit as a component in a system
(page 16).
7 INPUT2 (BNC jacks)
For connection of components that have RGB or
component output jacks such as a personal computer,
DVD player, or external RGB decoder. Make sure that
the connection made corresponds to the format of the
signal output from the connected component (pages 9
to 12).
3 COMBINATION IN/OUT
DO NOT MAKE ANY CONNECTIONS TO THESE
TERMINALS.
8 Synchronizing signal impedance selector switch
Depending on the connections made at INPUT2, it
may be necessary to set this switch to match the
output impedance of the connected component’s
synchronization signal.
These terminals are used in the factory setup.
4 RS-232C
DO NOT MAKE ANY CONNECTIONS TO THIS
TERMINAL.
When the output impedance of the component’s
synchronization signal is below 75 Ω, set this switch
to the 75 Ω position (pages 10, 12).
This terminal is used in the factory setup.
Operating range of the remote control unit
When operating the remote control unit, point it at the remote sensor
(Î) located on the front panel of the main unit. The remote control
unit is operable up to 23 feet (7 m) from the unit and within a 30
angle on each side of the sensor.
If you are having difficulty with operation of the remote
control unit
¶ The remote control unit may not operate if there are objects placed
between it and the display.
¶ Operational distance will gradually become shorter as the batteries begin
to wear out, replace weak batteries with new ones as soon as possible.
¶ This unit discharges infrared rays from the screen. Placing a video deck or
other component that is operated by an infrared remote control unit near
this unit may hamper that component’s reception of the remote control’s
signal, or prevent it from receiving the signal entirely. Should this occur,
move the component to a position further away from this unit.
7 m
(23 feet)
30˚
30˚
¶ Depending on the installation surroundings, this unit’s remote control unit
may be influenced by the infrared rays discharged from the plasma display,
hampering reception of its rays or limiting its operational distance. The
strength of infrared rays discharged from the screen will differ according
to the picture displayed.
Remote
Sensor
6
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Illustration depicts
PRO-1000HD
I
model.
(ON SYNC)
G
(H/V SYNC)
HD
INPUT1
INPUT2
R
AUDIO
INPUT OUTPUT
(INPUT1/2)
CONTROL
IN OUT
COMBINATION
IN OUT
RS-232C
8Ω ~16Ω
OUTPUT
B
VD
SPEAKER
ANALOG RGB
(ANALOG RGB)
R
75 2.2
+
–
Ô
Ω
kΩ
1
2
3
4
5
6
7
89 0
AC INLET
8Ω ~16Ω
INPUT5
AUDIO
L
AUDIO
R
INPUT3 S-VIDEO
L
AUDIO
R
INPUT4 VIDEO
SPEAKER
R
L
L
+
–
HDMI
-
=
~ !
$
%
^
@
#
9 AUDIO INPUT (Stereo mini jack)
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
Use to obtain sound when INPUT1 or INPUT2 is
selected.
Connect the audio output terminal of components
connected to INPUT1 or INPUT2 to this unit (page 15).
! INPUT3 (S-video jack)
For connection of components that have an S-video
output terminal such as a video deck, video camera,
LaserDisc player, or DVD player. (page 13)
0 AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier
or similar component (page 15).
@ AUDIO INPUT4 (RCA Pin jacks)
Use to obtain sound when INPUT4 is selected.
Connect these terminals to the audio output
connectors of components connected to INPUT4
(page 15).
- INPUT5 (HDMI jack)
For connection of components that have a digital
video output terminal sach as a digital set top box,
DVD player, etc. compatible with HDCP. Before
attempting to connect one of these devices, read its
operating instructions to make sure that it can be
connected (page 13).
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
# INPUT4 (BNC jack)
For connection of components that have a composite
video output terminal such as a video deck, video
camera, LaserDisc player, or DVD player (page 13).
(HDCP = High-brandwidth Digital Content Protection)
(HDMI = High Definition Multimedia Interface)
= AUDIO INPUT5 (RCA Pin jacks)
Use to obtain sound when INPUT5 (analog audio) is
selected.
$ Main power switch
Use to switch the main power of the unit on and off.
Connect these jacks to the audio output connectors of
components connected to INPUT5 (page 15).
% AC INLET
Use to connect the supplied power cord to an AC
outlet (page 16).
Note: The left audio channel (L) jack is not compatible
with monaural input sources.
^ SPEAKER (L) terminal
~ AUDIO INPUT3 (RCA Pin jacks)
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 –16 Ω (page 14).
Use to obtain sound when INPUT3 is selected.
Connect these jacks to the audio output connectors of
components connected to INPUT3 (page 15).
7
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Wall-mount installation of the unit
Installation of the Unit
Installation using the optional PIONEER stand or
installation bracket
÷ Please be sure to request installation or mounting of this unit
or the installation bracket by the dealer where purchased.
This unit has been designed with bolt holes for
wall-mount installation, etc.. The installation holes that
can be used are shown in the diagram below.
÷ Be sure to attach in 4 or more locations above and
below, left and right of the center line.
÷ Use bolts that are long enough to be inserted 1/2 inch
(12 mm) to 11/16 inch (18 mm) into the main unit from
the attaching surface for both a holes and b holes.
Refer to the side view diagram below.
÷ As this unit is constructed with glass, be sure to install
it on a flat, unwarped surface.
÷ When installing, be sure to use the bolts provided with the
stand or installation bracket.
÷ For details concerning installation, please refer to the
instruction manual provided with the stand or installation
bracket.
Installation using accessories other than the
PIONEER stand or installation bracket (sold
separately)
÷ When possible, please install using parts and accessories
manufactured by PIONEER. PIONEER will not be held
responsible for accident or damage caused by the use of parts
and accessories manufactured by other companies.
CAUTION
To avoid malfunction, overheating of this unit, and possible fire
hazard, make sure that the vents on the main unit are not
blocked when installing. Also, as hot air is expelled from the air
vents, be careful of deterioration and dirt build up on rear surface
wall, etc..
CAUTION
÷ For custom installation, please consult the dealer where the
Please be sure to use an M8 (Pitch = 1.25 mm) bolt. (Only this
size bolt can be used.)
unit was purchased.
Air vents (fan)
Attaching surface
Installation
bracket, etc..
Main unit
a hole
Center line
Bolt
b hole
a hole
b hole
a hole
1/2 inches (12 mm) to
11/16 inches (18 mm)
Bolt
b hole
Center line
1/2 inch (12 mm) to
11/16 inch (18 mm)
Rear view diagram (PRO-1000HDI)
Side view diagram
Air vents (fan)
CAUTION
This display unit weighs at least 67 lbs (30 kg) and has
little front-to-back depth, making it very unstable when
stood on edge. As a result, two or more persons
should cooperate when unpacking, moving, or installing
the display.
a hole
a hole
Center line
CAUTION
This unit incorporates a thin design. To ensure safety if
vibrated or shaken, please be sure to take measures to
prevent the unit from tipping over.
7 Optional line (sold separately)
(For details, please consult the dealer where this
unit was purchased.)
1 Table top stand
: PRO-1000HDI / PRO-800HDI
display stand.
Center line
2 Wall installation unit : Wall installation bracket
designed as a wall interface
Rear view diagram (PRO-800HDI)
for securing the unit.
8
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
For the screen sizes and input signals that INPUT1
and INPUT2 are compatible with, please refer to
supplement 1 (pages 39 to 40) and supplement 2
(page 41).
About the Input Connectors on this
Unit
Consult the following chart when making connections to
a plasma display (pages 9 to 16).
Connection to AV components
Input Connector
INPUT INPUT INPUT INPUT INPUT
Connected
Connection to AV component that has
component video jacks
1*1
2*1
3
4
5*4
component and signals
Analog RGB
Make component video connections for AV components
such as DVD and LD players or similar components with
component video output capability.
Component video
S video
Composite video
*5
Digital video
Analog RGB
S video
When connecting to INPUT1
*2
*3
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
*3
Composite video
*1 Although INPUT1/INPUT2 are compatible with various kinds
of signals, setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (pages 18 and 19).
*2 INPUT1 is compatible with Microsoft’s Plug & Play (VESA
DDC 1/2B).
*3 Depending on the video output board of the computer, this
type of connection may not be possible.
*4 Although INPUT5 is compatible with various kinds of signals,
setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (pages 20 and 21).
On-screen setup is necessary after connection.
Please see page 18.
Connection to INPUT1 and INPUT2
When connecting to INPUT2
Various components can be connected to the INPUT1 and
INPUT2 terminals. After connections are made, on-screen
setup is necessary to match the characteristics of the
connected component. Please see pages 18 and 19 for
on-screen setup after connection.
(ON SYNC)
G
(H/V SYNC)
HD
INPUT2
R
B
VD
75 2.2
Ô
Ω
kΩ
INPUT2 terminal
[ON SYNC]
[H/V SYNC]
Output source
G
B
B
B
B
R
R
R
R
HD
VD
Video component/
Personal
computer (PC)
with RGB output
G ON SYNC
G
G
Y
H/V SYNC
HD
VD
Video component
with component
video output
CB/PB CR/PR
: Connect to this jack.
: Do not connect anything.
Note
Connect the Y signal to the G terminal, the CB/PB signal to
the B terminal, and the CR/PR signal to the R terminal.
On-screen setup is necessary after connection.
Please see page 18.
Components compatible with INPUT1 are also compatible with
INPUT2.
When making connections to INPUT1, please refer to
supplement 4 on page 42.
9
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Connection of G ON SYNC analog RGB source
Make G ON SYNC connections for a component with
output that has the synchronization signal layered on top
of the green signal.
Connection of composite SYNC analog RGB
source
Make composite SYNC connections for a component
with output that has the vertical synchronization signal
layered on top of the horizontal synchronization signal.
When connecting to INPUT1
When connecting to INPUT1
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
On screen setup is necessary after connection.
Please see pages 18 and 19.
On-screen setup is necessary after connection.
Please see pages 18 and 19.
When connecting to INPUT2
When connecting to INPUT2
(ON SYNC)
G
(H/V SYNC)
HD
INPUT2
R
B
VD
(ON SYNC)
G
(H/V SYNC)
HD
INPUT2
R
75 2.2
Ô
Ω
kΩ
B
VD
75 2.2
Ô
Ω
kΩ
On screen setup is necessary after connection.
Please see pages 18 and 19.
When using INPUT2, set the impedance selector switch
to match the output impedance of the connected
component’s synchronization signal.
Note
When making G ON SYNC connections, do not make any
connections to the VD or HD terminals. If connections are made,
the picture may be not displayed normally.
When the output impedance of the component’s
synchronization signal is below 75 Ω, set this switch to
the 75 Ω position.
On-screen setup is necessary after connection.
Please see pages 18 and 19.
Note
When making composite SYNC connections, do not connect
anything to the VD terminal. If connected to, the picture may not
be displayed properly.
10
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
When connecting to INPUT1
Connection to a personal
computer
INPUT1
(ANALOG RGB)
OUTPUT
ANALOG RGB
Connection method differs depending on the computer
type. When connecting, please thoroughly read the
computer’s instruction manual.
Before making connections, be sure to make sure that
the personal computer’s power and this unit’s main
power is off.
For the PC input signals and screen sizes that this unit is
compatible with, please refer to supplement 1 (pages 39
to 40).
Connect the cable corresponding to the shape of the
input terminal on this unit and the personal computer’s
output terminal.
Connection of separate SYNC analog RGB
source
Make separate SYNC connections for a personal
computer that has RGB output separated into 5 output
signals: green, blue, red, horizontal synchronization signal,
and vertical synchronization signal.
Secure by tightening the terminal screws on both units.
After connecting, on-screen setup is necessary.
Please see pages 18 and 19.
When connecting to INPUT2
Note
Depending on the type of computer model being connected, a
conversion connector or adapter etc. provided with the computer
or sold separately may be necessary.
(ON SYNC)
G
(H/V SYNC)
HD
INPUT2
R
B
VD
75 2.2
Ô
Ω
kΩ
For details, please read your PC’s instruction manual or consult
the maker or nearest dealer of your computer.
When connecting to OUTPUT (INPUT1)
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
To an external monitor
When using INPUT2, set the impedance selector switch
to match the output impedance of the connected
computer’s synchronization signal.
When the output impedance of the computer’s
synchronization signal is below 75 Ω, set this switch to
the 75 Ω position.
With this unit, it is possible to output the video signal to
an external monitor or other component from the
OUTPUT (INPUT1) terminal.
Note
A video signal will not be output from the OUTPUT (INPUT1)
terminal when the main power of this unit is off or in standby.
On-screen setup is necessary after connection.
Please see pages 18 and 19.
11
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Connection of composite SYNC analog RGB
source
Connection of G ON SYNC analog RGB source
Make G ON SYNC connections for a personal computer
with output that has the synchronization signal layered on
top of the green signal.
Make composite SYNC connections for a personal
computer with output that has the vertical
synchronization signal layered on top of the horizontal
synchronization signal.
When connecting to INPUT1
When connecting to INPUT1
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
INPUT1
OUTPUT
ANALOG RGB
(ANALOG RGB)
On screen setup is necessary after connection.
Please see pages 18 and 19.
On-screen setup is necessary after connection.
Please see pages 18 and 19.
When connecting to INPUT2
When connecting to INPUT2
(ON SYNC)
G
(H/V SYNC)
HD
INPUT2
R
(ON SYNC)
G
(H/V SYNC)
HD
INPUT2
R
B
VD
B
VD
75 2.2
Ô
Ω
kΩ
75 2.2
Ô
Ω
kΩ
When using INPUT2, set the impedance selector switch
to match the output impedance of the connected
computer’s synchronization signal.
On screen setup is necessary after connection.
Please see pages 18 and 19.
When the output impedance of the computer’s
synchronization signal is below 75 Ω, set this switch to
the 75 Ω position.
Note
When making G ON SYNC connections, do not make any
connections to the VD or HD terminals. If connections are made,
the picture may be not displayed normally.
On-screen setup is necessary after connection.
Please see pages 18 and 19.
Notes
÷ When making composite SYNC connections, do not connect
anything to the VD terminal. If connected, the picture may not
be displayed properly.
÷ On some types of Macintosh® components, G ON SYNC and
composite SYNC are both output. With this type of
component, please connect using the G ON SYNC connection.
12
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Connection to INPUT3
Connection to INPUT5
Connect an AV component that has S-video output
terminal to the S-VIDEO input terminal.
Connect an AV component with a digital video output
(digital set top box, DVD player, etc.) compatible with
HDCP (High-brandwidth Digital Content Protection).
Before attempting to connect one of these components,
read its operating instructions to make sure that it can be
connected.
AUDIO
R
INPUT3 S-VIDEO
L
INPUT5
AUDIO
L
R
HDMI
AV component
AV component with a
digital video output
After connection is made, on-screen setup is necessory
to match the connected component. Please see page 20
to 21.
Connection to INPUT4
Connect an AV component that has a video output
terminal to the INPUT4 terminal.
Notes
÷ Use a HDMI (High Definition Multimedia Interface) cable for
connection.
÷ When connecting a component with DVI connector, use an
DVI / HDMI conversion cable to make a connection.
÷ It is not a jack intended to be used with a personal computer.
÷ See Supplement 3 (page 41) for information regarding signal
and display formats supported by INPUT5.
AUDIO
R
INPUT4 VIDEO
L
AV component
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
13
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
About DTV Set Top Box Connection
To ensure proper connection, please carefully read the instruction manual supplied with the DTV set top box.
The set top box output signals that this display is compatible with are as follows.
Terminals where connection is possible
Video
signal type
Video
signal format
Video signal
INPUT1 INPUT2 INPUT3 INPUT4 INPUT5
HDTV
1080i
720p
Component
RGB
Digital
1080p
480i
Component
RGB
SDTV
Composite
S Video
Component
RGB
480p
Component
RGB
Digital
Audio Connections
Before making connections, be sure to check that the audio component’s power and the unit’s main power is off.
Connecting the speakers
Making connections to the audio inputs on this
unit
This unit features three audio inputs and one audio output.
The following chart shows the video inputs and the
corresponding audio input terminals.
This unit is equipped with a 2W+2W internal amplifier. If
speakers are to be connected to the unit, following the
accompanying connection instructions.
m
Twist exposed
10 m
wire strands
Video
input
Audio input
terminal
together.
Sound output
INPUT1
Stereo mini jack
Sound of the selected video
input is output from the
• SPEAKER terminals
Push tab to the open
position, and insert the
wire. Then, close tab
firmly to secure the wire
in place.
INPUT2 (L/R)
Pin jacks (L/R)
INPUT3
INPUT4
INPUT5
• Stereo mini jack (L/R).
Pin jacks (L/R)
Pin jacks (L/R)
Note
When making speaker connections, be sure to match the
polarities (+ and –) of the speaker terminals on this unit and the
corresponding terminals on the speakers. If the polarity is
reversed, the sound will be unnatural and lack bass.
14
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Audio connections for component (computer)
connected to INPUT 1 or INPUT 2
Audio connection for component connected to
INPUT4
AUDIO
AUDIO
R
INPUT4 VIDEO
VD
INPUT
OUTPUT
L
(INPUT1/2)
75 2.2
Ô
Ω
kΩ
Audio input to the AUDIO INPUT4 terminals (pin jacks (L/
R)) is possible for a component connected to INPUT4.
Sound is output from both the AUDIO OUTPUT terminal
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
Audio input to the AUDIO INPUT terminal (stereo mini
jack) is possible for a component connected to either
INPUT1 or INPUT2.
Sound is output from both the AUDIO OUTPUT terminal
(stereo mini jack) and the SPEAKER terminals according
to the video input selection.
Audio connection for component connected to
INPUT5
Audio connection for component connected to
INPUT3
INPUT5
AUDIO
L
AUDIO
R
INPUT3 S-VIDEO
L
R
HDMI
Audio input to the AUDIO INPUT5 terminals (pin jacks (L/
R)) is possible for a component connected to INPUT5.
Sound is output from both the AUDIO OUTPUT terminal
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
Audio input to the AUDIO INPUT3 terminals (pin jacks (L/
R)) is possible for a component connected to INPUT3.
Sound is output from both the AUDIO OUTPUT terminal
(stereo mini jack (L/R)) and the SPEAKER terminals
according to the video input selection.
Note
When using AUDIO INPUT5, set the AUDIO SELECT to ANALOG
(or AUTO). Please see page 21.
15
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Power Cord Connection
Control Cord Connection
Connect the power cord after all component connections
have been completed.
When control cord connections are made, remote control
operation of connected PIONEER components that bear
the Î logo mark is done through the remote sensor on
this unit.
When the connection is made to the CONTROL IN
terminal on another unit, the remote sensor of that
component will no longer receive signals. Point the
remote control unit of the connected component at the
remote control sensor on this unit to control.
1
Notes
÷ Make sure the power is turned off when making
connections.
÷ Please complete all component connections before
making control cord connections.
2
1 Connect the power cord to this unit.
CONTROL
IN
Main unit
OUT
2 Plug the power cord into a power outlet.
CONTROL
IN
OUT
CAUTION
÷ Use only the power cord provided.
CONTROL
IN
÷ Do not use a power supply voltage other than that indicated
(AC 120 V, 60 Hz) as this may cause fire or electric shock.
OUT
÷ For the plasma display, a three-core power cord with a ground
terminal is used for efficiency protection. Always be sure to
connect the power cord to a three-pronged grounded outlet
and make sure that the cord is properly grounded. If you use a
power source converter plug, use an outlet with a ground
terminal and screw down the ground line.
CONTROL
IN
OUT
The control cables (not
supplied) are monaural
cables with mini plugs (no
resistance).
16
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
How to Route Cables
Speed clamps and bead bands are included with this unit for bunching cables together. Once components are connected,
follow the following steps to route cables.
*
As viewed from the rear of the display.
1
2
2 Bunch separated cables together and secure
1 Organize cables together using the provided
speed clamps.
them with the provided bead bands.
Insert 1 into an appropriate hole on the rear of the
unit, then snap 2 into the back of 1 to fix the clamp.
Note
Cables can be routed to the right or left.
Speed clamps are designed to be difficult to undo
once in place. Please attach carefully.
To attach the speed clamps to the main unit
Connect the speed clamps using the 4 holes marked with •
(Black dot) below, depending on the situation.
Illustration depicts PRO-1000HD model.
I
To remove speed clamps
Using pliers, twist the clamp 90° and pull it outward.
In some cases the clamp may have deteriorated over
time and may get damaged when removed.
17
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the System
5 Press 2/3 to select SET UP.
Setup after Connection (INPUT1, 2)
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
:
I NP UT L ABEL
I NP UT
1
After components have been connected to INPUT1 or
INPUT2, on-screen setup is necessary.
Follow the procedure described below and make settings
as they apply to the type of components connected.
:
AUT O P OWER OF F OF F
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
OF F
OF F
:
CL AMP POS I T I ON AU T O
:
:
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
Setting the Screen Mode/Input
Signal Format
SET
MENU
SELECT
ENTER
EXIT
[When inputting a computer signal]
Notes
÷ The Screen Mode setting (steps 6 – 7) is required only when
using the following input signal refresh rates: 1 31.5 kHz
horizontal / 60 Hz vertical; 2 48.4 kHz horizontal / 60 Hz
vertical; 3 56.5 kHz horizontal / 70 Hz vertical. No setup is
necessary for signals with other refresh rates, since
adjustments are performed automatically (the SETTING item
will not be displayed).
MAIN MENU
INPUT1
OPTION
I NP UT
PICTURE
SCREEN
SET UP
:
:
:
:
I NP UT L A BEL
POWE R MANAGEME NT OF F
CL AMP POS I T I ON
S E T T I N G
1
AU T O
V GA
6 Press 5/∞ to select SETTING, then press SET.
÷ The Input Signal Format setting (steps 8 – 9) is required only
when inputting a video signal. It is not supported when
inputting a computer signal, or when the Screen Mode setting
has been used to select a mode other than VIDEO.
MAIN MENU
PICTURE
INPUT1
OPTION
SCREEN
SET UP
:
I NP UT L ABEL
AUT O P OWER OF F OF F
I NP UT
1
:
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
OF F
1 Switch the main power switch on the connection
panel to the on position to turn on the unit’s main
power.
OF F
:
CL AMP POS I T I ON AU T O
:
:
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
The STANDBY/ON indicator lights red.
SET
MENU
SELECT
ENTER
EXIT
2 Press STANDBY/ON to put the unit in the
operation mode.
[When inputting a computer signal]
The STANDBY/ON indicator turns green.
MAIN MENU
INPUT1
OPTION
I NP UT
PICTURE
SCREEN
SET UP
:
I NP UT L A BEL
POWE R MANAGEME NT OF F
CL AMP POS I T I ON
1
3 Select INPUT1 or INPUT2.
:
:
:
AU T O
V GA
S E T T I N G
4 Press MENU to display the menu screen.
The menu screen appears.
7 Press 2/3 to select the display mode.
When a component other than a personal computer is
connected, set to “VIDEO”.
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
:
SET UP
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
:
:
:
:
0
0
0
0
:
S E T T I N G V I DE O
RE S ET
SET
MENU
SELECT
SET
EXIT
1 When the input signal has a refresh rate of 31.5 kHz
(horizontal) and 60 Hz (vertical), pressing 2/3 will
cause the display mode to change alternately as
follows:
SET
MENU
SELECT
ENTER
EXIT
[When inputting a computer signal]
MAIN MENU
INPUT1
VIDEO
VGA
PICTURE
SCREEN
SET UP
OPTION
WIDE VGA
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
0
6 0
6 0
6 0
0
2 When the input signal has a refresh rate of 48.4 kHz
(horizontal) and 60 Hz (vertical), or 56.5 kHz
(horizontal) and 70 Hz (vertical), pressing 2/3 will
cause the display mode to change alternately as
follows:
+
+
+
0
RE S ET
XGA
WIDE XGA
18
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the System
8 When inputting a video signal (When VIDEO is
CLAMP POSITION setup
selected), press 5/∞ to select VIDEO SIGNAL.
MAIN MENU
INPUT1
Depending on the signal, analog RGB signals may result
in the screen image appearing with a whitish or greenish
cast. In such cases, set “CLAMP POSITION” to LOCKED.
÷ Normally, leave this setting at AUTO.
PICTURE
SCREEN
SET UP
:
OPTION
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
CL AMP POS I T I ON AU T O
S E T T I N G
V I DEO S I GNA L
I NP UT
1
:
:
:
:
:
M I DDL E
L OW
OF F
OF F
:
Setup of CLAMP POSITION
:
:
V I DE O
RGB
1 Press MENU to display the menu screen.
The menu screen appears.
SET
MENU
SELECT
CHANGE
EXIT
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
9 Press SET repeatedly to select the input signal
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
format.
+
+
+
R. L EV EL
Selection will change as follows each time SET is
pressed.
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
RGB
RE S ET
COMPONENT
The table below shows what settings are appropriate
and available for the type of connections made.
Set SETTING and VIDEO SIGNAL as follows.
SET
MENU
SELECT
ENTER
EXIT
2 Press 2/3 to select SET UP.
MAIN MENU
INPUT1
OPTION
SET UP
PICTURE
SCREEN
SET UP
VIDEO SIGNAL
SETTING
Connected
component
:
:
:
:
I NP UT L A BEL
POWE R MANAGEME NT OF F
CL AMP POS I T I ON
S E T T I N G
I NP UT
1
AU T O
V GA
Component video output
of a DVD player, etc.
VIDEO
VIDEO
COMPONENT
RGB
RGB video output of a
video deck etc., with RGB
output
3 Press 5/∞ to select CLAMP POSITION.
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
:
OPTION
RGB video output of a PC VGA
WVGA
Not supported
I NP UT L A BEL
POWE R MANAGEME NT OF F
CL AMP POS I T I ON
I NP UT
1
:
:
:
A U TO
V GA
XGA
S E T T I N G
WXGA
4 Press SET to select LOCKED.
10 When the setup is completed, press MENU to exit
MAIN MENU
INPUT1
OPTION
the menu screen.
PICTURE
SCREEN
SET UP
:
Note
I NP UT L A BEL
POWE R MANAGEME NT OF F
CL AMP POS I T I ON
I NP UT
1
:
Make this setup for each input (INPUT1 and INPUT2).
:
:
L OCKED
S E T T I N G
V GA
Mode selection will change as follows each time SET
is pressed.
3 AUTO
LOCKED 2
5 When the setup is completed, press MENU to exit
the menu screen.
Notes
÷ Make this CLAMP POSITION setting for each applicable input
(INPUT1 and INPUT2).
÷ When using this setup, be sure to carefully check the signal
output of the component that you are using. For details, please
refer to the instruction manual supplied with the component
you are connecting.
19
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the System
4 Press SET to select the desired VIDEO SIGNAL
setting.
Setup after Connection (INPUT5)
The unit has been factory set at the AUTO setting.
Each time SET is pressed, the VIDEO SIGNAL setting
changes as shown:
After a component has been connected to INPUT5, on-
screen setup is necessary.
Follow the procedure described below and make settings
as they apply to the type of components connected.
AUTO
COLOR-1
COLOR-2
COLOR-3
AUTO:
Automatically identifies input video signals.
VIDEO SIGNAL
COLOR-1: Accepts Y PB/CB PR/CR (4 : 2 : 2) signals.
COLOR-2: Accepts Y PB/CB PR/CR (4 : 4 : 4) signals.
COLOR-3: Accepts RGB signals.
This function allows you to switch the input signal format
to automatic or manual when inputting the digital signal.
Note
Note
Even when AUTO is selected, automatic switching may occur
properly with someinput signals. In this event, select COLOR-1,
COLOR-2 or COLOR-3 manually in accordance with the actual
signal input.
VIDEO SIGNAL setting is possible only when INPUT5 is selected.
1 Press MENU to display the menu screen.
The menu screen appears.
MAIN MENU
INPUT5
OPTION
5 When the setup is completed, press MENU to exit
PICTURE
SCREEN
:
SET UP
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
the menu screen.
:
:
:
:
0
0
0
0
RE S ET
SIGNAL RANGE
This function allows you to switch the input signal level to
automatic or manual when inputting the digital signal.
SET
MENU
SELECT
ENTER
EXIT
2 Press 2/3 to select SET UP.
Note
MAIN MENU
INPUT5
OPTION
PICTURE
SCREEN
SET UP
SIGNAL RANGE setting is possible only when INPUT5 is
selected.
:
:
:
:
:
:
:
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
S I GNAL
S I GNAL RANGE
I NP UT
5
M I DDL E
L OW
OF F
AU T O
AU T O
AU T O
1 Press MENU to display the menu screen.
The menu screen appears.
V I D EO
MAIN MENU
INPUT5
OPTION
:
AUD I O S EL ECT
PICTURE
SCREEN
SET UP
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
SET
MENU
SELECT
ENTER
EXIT
3 Press 5/∞ to select VIDEO SIGNAL.
RE S ET
MAIN MENU
PICTURE
INPUT5
OPTION
I NP UT
SCREEN
SET UP
:
I NP UT L ABEL
AUT O P OWER OF F OF F
5
:
:
:
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
V I D EO
S I GNAL RANGE
AUD I O S EL ECT
M I DDL E
L OW
SET
MENU
SELECT
ENTER
EXIT
OF F
S I GNAL
A U T O
AU T O
AU T O
2 Press 2/3 to select SET UP.
MAIN MENU
INPUT5
OPTION
PICTURE
SCREEN
SET UP
:
I NP UT L ABEL
I NP UT
5
:
AUT O P OWER OF F OF F
:
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
M I DDL E
L OW
OF F
AU T O
AU T O
AU T O
SET
MENU
SELECT
CHANGE
EXIT
V I D EO
S I GNAL
S I GNAL RANGE
AUD I O S EL ECT
:
SET
MENU
SELECT
ENTER
EXIT
20
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the System
3 Press 5/∞ to select SIGNAL RANGE.
2 Press 2/3 to select SET UP.
MAIN MENU
PICTURE
INPUT5
OPTION
I NP UT
MAIN MENU
PICTURE
INPUT5
OPTION
SCREEN
SET UP
:
SCREEN
SET UP
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
5
:
I NP UT L ABEL
I NP UT
5
:
:
AUT O P OWER OF F OF F
:
:
:
:
:
M I DDL E
L OW
:
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
M I DDL E
L OW
OF F
OF F
AU T O
A U T O
AU T O
V I D EO
S I GNAL
AU T O
AU T O
AU T O
V I D EO
S I GNAL
S I GNAL RA NGE
AUD I O S EL ECT
S I GNAL RANGE
AUD I O S EL ECT
:
:
SET
MENU
SELECT
CHANGE
EXIT
SET
MENU
SELECT
ENTER
EXIT
4 Press SET to select the desired SIGNAL RANGE
setting.
3 Press 5/∞ to select AUDIO SELECT.
MAIN MENU
PICTURE
INPUT5
OPTION
I NP UT
SCREEN
SET UP
:
The unit has been factory set at the AUTO setting.
Each time SET is pressed, the SIGNAL RANGE
setting changes as shown:
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
5
:
:
:
:
:
:
M I DDL E
L OW
OF F
AU T O
AU T O
A U T O
V I D EO
S I GNAL
AUTO
S I GNAL RANGE
A UD I O S EL ECT
:
TYPE-2
TYPE-1
AUTO:
TYPE-1:
Select AUTO for normal picture set up.
Select TYPE-1 to remove white glare in the
picture when AUTO is set.
SET
MENU
SELECT
CHANGE
EXIT
4 Press SET to select the desired AUDIO SELECT
setting.
TYPE-2:
Select TYPE-2 for too dark or distorted
picture when AUTO is set.
The unit has been factory set at the AUTO setting.
Each time SET is pressed, the AUDIO SELECT setting
changes as shown:
Note
Even when AUTO is selected, automatic switching may occur
properly with someinput signals. In this event, select TYPE-1 or
TYPE-2 manually in accordance with the actual signal input.
AUTO
ANALOG
DIGITAL
5 Following completion of the setting, press MENU
AUTO:
Automatically identifies input audio signals.
once again to return to the normal display.
DIGITAL: Accept digital audio signals
ANALOG:Accept analog audio signals
Note
Even when AUTO is selected, automatic switching may occur
properly with someinput signals. In this event, select DIGITAL or
ANALOG manually in accordance with the actual signal input.
AUDIO SELECT
This function allows you to switch the audio signal to
automatic or manual when inputting the digital signal.
5 Following completion of the setting, press MENU
once again to return to the normal display.
Note
AUDIO SELECT setting is possible only when INPUT5 is
selected.
1 Press MENU to display the menu screen.
The menu screen appears.
MAIN MENU
INPUT5
OPTION
PICTURE
SCREEN
SET UP
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
RE S ET
SET
MENU
SELECT
ENTER
EXIT
21
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
3 Press INPUT on the remote control unit or the
main unit to select the input.
Selecting an Input Source
Input changes each time the main unit’s INPUT is
pressed as follows.
This section explains the basic operation of this unit.
Outlined on the following pages is how to turn the main
power on and off, put this unit in the operation or standby
mode and how to select connected components.
3 INPUT1
3 INPUT2
3 INPUT3
INPUT4 2
INPUT5 2
• When the menu screen is displayed, changing the
signal input will cause the menu screen to turn off.
• If the input computer signal is not supported by the
display, the following message will be displayed:
Before you begin, make sure you have:
• Made connections between this unit and AV components
or personal computer as described in the section
“Installation and Connections” starting on page 8.
• Set up the on-screen menu to input signals from
components connected to INPUT1 and INPUT2 as
described in the section “Setting Up the System” on
page 18.
I NPUT
1
CAU T I O N
UNSUP P ORT ED S I GNAL
:
:
f H
f V
7 7
8 5
.
.
1
0
kH z
H z
If no connections are made to these terminals,
on-screen setup is not necessary.
1 1 5 2 8 6 4
X
FUL L
2,5
I NPUT
1
2,5
3
CAU T I O N
OUT OF RANG E
3
:
f H
7 5
.
.
7
0
kH z
H z
:
f V 1 2 0
– – – –
FUL L
4 Use VOLUME +/– on the remote control unit to
adjust the volume.
If no audio connections are made to this unit, this step
is not necessary.
4
5 When viewing is finished, press STANDBY/ON to
put the unit in standby mode.
Main Unit Operating
Panel
Remote Control Unit
The STANDBY/ON indicator will blink and then remain
lit (red) indicating that the standby mode is engaged.
Operation is not possible while the STANDBY/ON
indicator is blinking (red).
1 Switch the main power switch on the main unit to
the on position to turn the main power on.
The STANDBY/ON indicator lights red.
6 Switch MAIN POWER on the main unit to the off
position to turn the main power off.
2 Press STANDBY/ON to put this unit in the
operation mode.
The STANDBY/ON indicator may continue to light for a
short while even after the main power is turned off.
This is a result of residual electric load impressed on
the circuitry, and the light will turn off presently.
The STANDBY/ON indicator turns green.
CAUTION
Please do not leave the same picture displayed on the screen for
a long time. Doing so may cause a phenomenon known as
“screen burn” which leaves a ghost, or residual, image of the
picture on the screen.
22
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
To adjust the volume
To confirm display settings
DISPLAY
VOLUME +/–
Press VOLUME on the remote control unit.
Use VOLUME + or VOLUME – to adjust the volume of
the connected speakers.
Press DISPLAY on the remote control unit.
The currently selected input, screen size and refresh rates
will be displayed for about 3 seconds.
:
VOLUME
5
I NPUT
1
:
:
f H
f V
3 1
6 0
.
.
5
0
kH z
H z
To mute the sound
6 4 0 4 8 0
X
DOT BY DOT
MUTING
Note
The displayed refresh rates may be slightly different from the
actual values.
Press MUTING on the remote control unit.
Press MUTING again to restore the sound.
Muting is automatically canceled about 8 minutes after
the button is pressed, and the volume level is adjusted to
the minimum level.
Press VOLUME + or VOLUME – to adjust the volume at
a desired level.
23
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
During video signal input
Screen Size Selection
How the picture looks
WIDE
Suitable for when viewing news or
sports programs. Movies or sports
programs can be viewed with an
expansive powerful image.
This unit incorporates screen modes of various height and
width ratios. For optimal viewing, we recommend that
you select the screen mode that best matches the video
source that you are viewing. Although these modes are
designed for full display of a picture on a wide screen, it is
our hope that you make use of them with a full
4:3
Suitable for when viewing news or
sitcoms. The video software can be
viewed in its original screen frame
size. (To prevent screen burn on this
display, the displayed position of the
screen frame will be slightly different
each time the power is turned on.)
understanding of the manufacturer’s intentions.
FULL
Suitable for wide screen images
(squeeze).
Changing the screen size
The size of the picture or the picture’s range projected on
the screen can be changed between 4 screen sizes
described in the table on this page.
ZOOM
Mainly suitable for viewing
Cinemascope size and other such
movie images.
Provides a more expansive, powerful
image.
Press SCREEN SIZE to select the size.
The screen size changes each time SCREEN SIZE is
pressed as follows.
During personal computer signal input
1 DOT BY DOT
The input signal and the screen maintain a dot to line ratio
of 1:1 and is thus highly faithful to the source.
[PRO-1000HDI]
[During video signal input]
3 WIDE
3 4:3
ZOOM 2
FULL 2
[During personal computer signal input]
3 DOT BY DOT
3 4:3
FULL 2
480
768
Consult the table Computer Signal Formats Supported
(pages 39 and 40) for information regarding screen sizes
supported by each signal format.
lines
lines
A
640 dots
Notes
(Illustration shows
640 x 480 input.)
÷ When the WIDE, ZOOM or FULL setting is used to display a
non-wide screen 4:3 picture fully on a wide screen, a portion
of the picture may be cut off or appear deformed.
1280 dots
[PRO-800HDI]
* The PRO-800HDI is designed with horizontally oblong
elements, with the result that the image displayed will
appear more oblong than the original input signal.
÷ Be aware that when the display is used for commercial or
public viewing purposes, selecting the WIDE, ZOOM or FULL
mode settings may violate the rights of authors protected
under copyright law.
÷ When DOT BY DOT or 4:3 screen sizes are selected, the
display position is moved slightly each time the power is
turned on, in order to prevent image burning.
480
768
lines
lines
A
(Illustration shows
640 x 480 input.)
640 dots
Moving the screen position
upward or downward
1024 dots
2 4:3
3 FULL
The display is presented
as much as possible without with a widescreen aspect
When a vista size movie etc., is viewed at the ZOOM
setting, the image may not be centered on the screen,
and may extend past the edge of the screen.
In this case, adjust the screen to an clearly viewable
position using 5/∞.
The display fills the screen
altering the aspect ratio of
the input signal.
ratio of 16:9 and fills the
entire screen.
Automatic screen size
When a High-Definition Television signal (1080i, 720p,
1080p) is detected, the screen size is automatically
changed to FULL.
A
Note:
When viewing at aspect ratio 4:3 continuously for numerous hours,
or for repeated short periods of time each day, some after image
may be burned into the screen.
To avoid such burning of after images in the screen, use aspect ratios
other than 4:3 whenever possible, unless necessary to avoid
infringement of copyright.
24
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
2 Press 5/∞/2/3 as required to select the desired
Partial Image Enlargement
(POINT ZOOM)
screen area (AREA 1 to AREA 9).
3 Press SET to select the zoom ratio.
Pressing SET repeatedly changes the zoom ratio in
the following order:
This display allows any one of nine screen areas (AREA 1
to AREA 9) to be selected and enlarged to x1.5, x2, x3, or
x4. When performing point zoom enlargement, the
direction buttons (5/∞/2/3) can be used to move the
enlarged portion up-down and right-left.
3 x 1.5
3 x 2.0
x 4.0 2
x 3.0 2
÷ When the zoom ratio is changed, the screen image
is enlarged based on the screen center.
÷ 5/∞/2/3 can be used to move the enlarged portion
up-down and right-left.
Notes
÷ The POINT ZOOM function is supported only when the input
signal is from a computer.
÷ Whenever POINT ZOOM is selected, the screen size
÷ If no operation is undertaken for three seconds or
more, the display screen will disappear.
automatically changes to FULL.
SET or 5/∞/2/3 can be pressed again if desired to
change the zoom ratio or display position.
1 Press the remote control unit’s POINT ZOOM.
4 Press the remote control unit’s POINT ZOOM once
again to cancel the point zoom operation.
The point zoom function will also be canceled
whenever the input signal changes, the menu screen
is displayed, or the INPUT changes.
P.ZOOM
SET
EXIT
ZOOM
SELECT
AREA 1 display range
AREA 2 display range
AREA 3 display range
AREA 1
x 4.0
AREA 2
x 4.0
AREA 3
x 4.0
x 3.0
x 3.0
x 3.0
x 2.0
x 1.5
x 2.0
x 1.5
x 2.0
x 1.5
AREA 4 display range
AREA 5 display range
AREA 6 display range
AREA 4
x 4.0
AREA 5
x 4.0
AREA 6
x 4.0
x 3.0
x 3.0
x 3.0
x 2.0
x 1.5
x 2.0
x 1.5
x 2.0
x 1.5
AREA 7 display range
AREA 8 display range
AREA 9 display range
AREA 7
x 4.0
AREA 8
x 4.0
AREA 9
x 4.0
x 3.0
x 3.0
x 3.0
x 2.0
x 1.5
x 2.0
x 1.5
x 2.0
x 1.5
25
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
3 Press 5/∞ to select either the POWER
MANAGEMENT or AUTO POWER OFF mode.
[When computer signal is input to INPUT 1]
Automatic Power OFF
This display is equipped with automatic power-
management and auto-power-off functions, which allow
the unit to automatically switch to power-saving mode
when no sync signal is detected.
MAIN MENU
PICTURE
INPUT1
OPTION
SCREEN
SET UP
:
I NP UT L A BEL
POWE R MA NA GEME NT OF F
I NP UT
1
:
:
:
(A warning message appears onscreen before these
functions operate.)
CL AMP POS I T I ON
S E T T I N G
AU T O
V GA
Notes
÷ Power Management settings are supported only when a
computer signal is input to INPUT 1.
÷ The auto-power-off function can be used only in those cases
other than the inputs used in the preceding item.
÷ Always turn off the plasma display’s main power switch when
not using the display for extended periods of time.
SET
MENU
SELECT
CHANGE
EXIT
[In all other cases]
MAIN MENU
INPUT2
OPTION
I NP UT
1 Press MENU to display the menu screen.
PICTURE
SCREEN
SET UP
:
I NP UT L A BEL
A UTO POWE R
CL AMP POS I T I ON AU T O
S E T T I N G
2
:
:
:
OF F OF F
MAIN MENU
PICTURE
INPUT1
OPTION
SCREEN
SET UP
V GA
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
+
+
+
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
4 Press SET to confirm selection of the POWER
MANAGEMENT or AUTO POWER OFF.
0
3 OFF
RE S ET
ON 2
÷ When OFF is selected, the display will continue in
operating mode, regardless of the presence/
absence of an input sync signal.
SET
MENU
SELECT
ENTER
EXIT
÷ When POWER MANAGEMENT: ON is selected, if
a sync signal is not detected, a warning message is
displayed for 8 seconds, after which the display
automatically enters the power-saving mode (*1)
and the STANDBY/ON indicator flashes green. If a
sync signal (*2) is input again later, the plasma
display automatically returns to normal operating
mode.
2 Press 2/3 to select SET UP.
[When computer signal is input to INPUT 1]
MAIN MENU
PICTURE
INPUT1
OPTION
SCREEN
SET UP
:
I NP UT L A BEL
I NP UT
1
:
POWE R MANAGEME NT OF F
:
:
CL AMP POS I T I ON
S E T T I N G
AU T O
V GA
*1. Power consumption about 1W
*2. Except when input signal is G on SYNC or composite
SYNC
÷ When AUTO POWER OFF: ON is selected, if no
sync signal is detected for 8 minutes or more, a
warning message will be displayed for 30 seconds,
after which the unit's power will switch to
STANDBY mode.
SET
MENU
SELECT
ENTER
EXIT
[In all other cases]
5 When the setup is finished, press MENU to exit
the menu screen.
Note
The POWER MANAGEMENT and AUTO POWER OFF functions
must be set individually for each input (INPUT 1 – 5).
MAIN MENU
INPUT2
OPTION
I NP UT
PICTURE
SCREEN
SET UP
:
:
:
I NP UT L A BEL
A UTO POWE R OF F OF F
CL AMP POS I T I ON AU T O
2
:
S E T T I N G
V GA
To return to operating mode:
÷ To return to normal operation from POWER
MANAGEMENT mode: either operate the computer,
or press INPUT on the main unit operating panel or
remote control unit.
SET
MENU
SELECT
ENTER
EXIT
÷ To return to normal operation from AUTO POWER
OFF mode: Press STANDBY/ON on the main unit
operating panel or remote control unit.
26
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Adjustments
[When computer signal is input to INPUT 1 or 2]
MAIN MENU
INPUT1
Adjusting the Picture Quality
Note
Make these adjustments for each input (INPUT1 to INPUT5) and
signals.
PICTURE
SCREEN
:
SET UP
OPTION
CONT RAST
BR I GHT .
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
:
:
:
:
:
:
0
6 0
6 0
6 0
0
+
+
+
0
PICTURE mode adjustment items
Below are brief descriptions of the options that can be set
in the PICTURE mode.
RE S ET
SET
MENU
SELECT
ENTER
EXIT
[When video signal is input]
2 Press 5/∞ to select the adjustment item, then
CONTRAST ············· Adjust according to the surrounding
brightness so that the picture can be
seen clearly.
press SET.
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
BRIGHT. ·················· Adjust so that the dark parts of the
picture can be seen clearly.
COLOR···················· Adjust to the desired depth. (Setting
to a slightly deep color will create a
natural looking picture.)
:
:
:
:
:
CONT RAST
BR I GHT .
COL OR
T I NT
SH ARP
0
0
0
0
0
RE S ET
TINT························· Adjust so that flesh tones look
normal.
SHARP ···················· Normally set to the center position.
To create a softer picture, set to the
left of center. To create a sharper
SET
MENU
SELECT
ENTER
EXIT
3 Press 2/3 to adjust the picture quality as desired.
picture, set to the right of center.
[When computer signal is input to INPUT 1 or 2]
CONTRAST ············· Adjust according to the surrounding
brightness so that the picture can be
seen clearly.
BRIGHT. ·················· Adjust so that the dark parts of the
picture can be seen clearly.
R. LEVEL ················· Adjust the amount of red in the
picture.
G. LEVEL ················· Adjust the amount of green in the
picture.
:
BR I GHT .
ADJUST
0
SET
MENU
SET
EXIT
4 Press SET.
Pressing SET writes the value into the memory and
returns the display to the step 2 screen.
5 When the setup is finished, press MENU to exit
the menu screen.
B. LEVEL ················· Adjust the amount of blue in the
picture.
H. ENHANCE··········· Sharpens the image in the horizontal
direction.
V. ENHANCE ··········· Sharpens the image in the vertical
direction.
To reset PICTURE mode settings to the default
If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the PICTURE mode to default
settings instead of trying to make adjustments under
already adjusted conditions.
1 Press MENU to display the menu screen.
1 In step 2 in the previous procedure, press 5/∞ to
MAIN MENU
INPUT1
select RESET, then press SET.
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
P I CTU RE
Y E S
RESE T
?
NO
RE S ET
SET
MENU
SELECT
SET
EXIT
2 Press 2/3 to select YES, and press SET.
All PICTURE mode settings are returned to the factory
set default.
SET
MENU
SELECT
ENTER
EXIT
27
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Adjustments
Manual Adjustment of Screen
Position and Clock
Adjusting the Image Position and
Clock (Automatic Adjustment)
Pressing AUTO SET UP on either the main unit operating
panel or the remote control unit will adjust the screen
position and clock to optimum values.
Note
Make these adjustments for each input and signals.
SCREEN mode adjustment items
Below are brief descriptions of the options that can be set
in the SCREEN mode.
Notes
÷ This adjustment is supported only when a computer signal is
input.
POSITION
÷ Perform this adjustment individually for each input function
(INPUT1 or INPUT2), and each signal type.
H.POSITION·········· Adjust the picture’s position to the
left or right.
V.POSITION ·········· Adjust the picture’s position upward
or downward.
CLOCK/PHASE
CLOCK. ················· Adjust letter breakup or noise on the
screen. This setting adjusts the
unit’s internal clock signal
AUTO
frequency that corresponds to the
input video signal.
SET UP
PHASE ·················· Adjust so that there is minimum
flicker of screen letters or color
misalignment. This setting adjusts
the phase of the internal clock
signal adjusted by the CLOCK
setting.
1 Press MENU to display the menu screen.
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
+
+
+
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
AUTO SET UP
0
RE S ET
Main Unit Operating
Panel
Remote Control Unit
SET
MENU
SELECT
ENTER
EXIT
Press AUTO SET UP on either the main unit operating
panel or remote control unit.
2 Press 2/3 to select SCREEN.
MAIN MENU
INPUT1
OPTION
÷ Optimum settings may not be possible for low-
luminance and certain other kinds of signals. In this
case, following the instructions in the following section
“Manual Adjustment of Screen Position and Clock”
to make more precise adjustments.
PICTURE
SCREEN
SET UP
:
:
POS I T I ON
0
0
/
/
0
0
CL OCK / PHAS E
RE S ET
SET
MENU
SELECT
ENTER
EXIT
28
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Panel Adjustments
To reset SCREEN mode settings to the default
If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the SCREEN mode to default
settings instead of trying to make adjustments under
already adjusted conditions.
[When video signal input is selected]
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
:
POS I T I ON
0
/
0
RE S ET
1 In step 3 in the previous procedure, press 5/∞ to
select RESET, then press SET.
SET
MENU
SELECT
ENTER
EXIT
3 Press 5/∞ to select the adjustment item, then
press SET.
MAIN MENU
PICTURE
INPUT1
OPTION
SCREE N
YES
RESE T
?
SCREEN
SET UP
NO
:
:
POS I T I ON
CL OCK / PHAS E
0
/
0
0
/
0
SET
MENU
SELECT
SET
EXIT
RE S ET
2 Press 2/3 to select YES, and press SET.
All SCREEN mode settings are returned to the factory
set default.
SET
MENU
SELECT
ENTER
EXIT
4 Press 2/3 to carry out the adjustment.
:
:
H. POS I T I ON
V. POS I T I ON
0
0
MENU
SET
EXIT
SET
ADJUST
Use 5/∞ for the adjustments of V.POSITION and
PHASE.
5 Press SET.
Pressing SET writes the value into the memory and
returns the display to the step 3 screen.
6 When adjustment is finished, press MENU to exit
the menu screen.
Notes
÷ When CLOCK adjustment is carried out, the H.POSITION
setting may have to be re-adjusted.
÷ If the adjustment items in the SCREEN mode are adjusted
excessively, the picture may not be displayed properly.
29
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
5 Press 2/3/5/∞ to select the first desired
character (here, “C”), then press SET to confirm
(repeat this step to input up to eight desired
characters.)
Rewriting the Input Display
(INPUT LABEL)
This function allows rewriting of the screen contents
displayed with differing inputs. For example, the default
“INPUT 1” can be changed to “COMPUTER” or other
name describing the connected component (up to
maximum of 8 characters).
MAIN MENU
INPUT1
I NP UT L ABEL
BACK SPACE
C I NP UT
1
A
N
0
'
B
O
1
"
C
P
2
/
D
Q
3
–
E
R
4
(
F
S
5
)
G
T
6
H
U
7
I
J
K
X
.
L
Y
,
M
Z
V
8
:
W
9
#
Example: To rewrite the default “INPUT 1” message
to display “COMPUTER” instead.
~
@
?
&
RESET
S PACE
END
1 Press INPUT and set input to INPUT 1.
SET
MENU
SELECT
SET
EXIT
2 Press MENU to display the menu screen.
÷ Usable characters include 52 types displayable on
screen.
MAIN MENU
PICTURE
INPUT1
OPTION
÷ When a character is selected and SET pressed, the
input point (cursor position) advances by one.
÷ If you input a mistaken character, press BACK SPACE
followed by SET to move the input point (cursor
position) back by one.
SCREEN
SET UP
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
+
+
+
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
÷ To return the display to its default value, press
RESET followed by SET.
RE S ET
MAIN MENU
INPUT1
SET
MENU
SELECT
ENTER
EXIT
I NP UT L ABEL
BACK SPACE
3 Press 2/3 to select SET UP.
COMPUT ER
A
N
0
'
B
O
1
"
C
P
2
/
D
Q
3
–
E
R
4
(
F
S
5
)
G
T
6
H
U
7
I
J
K
X
.
L
Y
,
M
Z
MAIN MENU
INPUT1
OPTION
V
8
:
W
9
#
PICTURE
SCREEN
SET UP
~
@
?
&
:
:
I NP UT L A BEL
POWE R MANAGEME NT OF F
CL AMP POS I T I ON
S E T T I N G
I NP UT
1
RESET
S PACE
END
:
:
AU T O
V GA
SET
MENU
SELECT
SET
EXIT
6 After setting all inputs as desired, press 2/3/5/∞
to select END , followed by SET.
SET
MENU
SELECT
ENTER
EXIT
MAIN MENU
PICTURE
COMPUTER
OPTION
SCREEN
SET UP
4 Press SET to select INPUT LABEL.
:
I NP UT L A BEL
COMP UT E R
:
POWE R MANAGEME NT OF F
:
:
CL AMP POS I T I ON
S E T T I N G
AU T O
V GA
MAIN MENU
INPUT1
I NP UT L ABEL
I NP UT
1
BACK SPACE
A
N
0
'
B
O
1
"
C
P
2
/
D
Q
3
–
E
R
4
(
F
S
5
)
G
T
6
H
U
7
I
J
K
X
.
L
Y
,
M
Z
V
8
:
W
9
#
SET
MENU
SELECT
ENTER
EXIT
~
@
?
&
RESET
S PACE
END
7 Press MENU to return to the normal display
SET
MENU
SELECT
SET
EXIT
screen.
30
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
Changing the Color Temperature
(COLOR TEMP)
Reducing Video Noise (DIGITAL NR)
Make this setting if video noise is objectionable.
Note
Note
Digital noise reduction settings are supported only with input
signals from a video device. Settings are made individually for
each of the inputs (INPUT1 – INPUT5).
Color temperature settings are supported only with input signals
from a video device. Settings are made individually for each of
the inputs (INPUT1 – INPUT5).
1 Press MENU to display the menu screen.
1 Press MENU to display the menu screen.
MAIN MENU
INPUT1
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
RE S ET
RE S ET
SET
MENU
SELECT
ENTER
EXIT
SET
MENU
SELECT
ENTER
EXIT
2 Press 2/3 to select SET UP.
2 Press 2/3 to select SET UP.
MAIN MENU
INPUT1
OPTION
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
PICTURE
SCREEN
SET UP
:
:
I NP UT L ABEL
I NP UT
1
I NP UT L ABEL
I NP UT
1
:
:
AUT O P OWER OF F OF F
AUT O P OWER OF F OF F
:
:
:
:
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
OF F
OF F
OF F
:
:
CL AMP POS I T I ON AU T O
CL AMP POS I T I ON AU T O
:
:
:
:
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
SET
MENU
SELECT
ENTER
EXIT
SET
MENU
SELECT
ENTER
EXIT
3 Press 5/∞ to select COLOR TEMP.
3 Press 5/∞ to select DIGITAL NR.
MAIN MENU
INPUT1
OPTION
I NP UT
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
:
PICTURE
SCREEN
SET UP
:
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
1
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T A L NR
H I GH CONTRAS T
P URE C I NEMA
I NP UT
1
:
:
:
:
:
M I DDL E
M I DDL E
L OW
:
:
:
:
L OW
OF F
OF F
:
:
:
OF F
OF F
CL AMP POS I T I ON AU T O
S E T T I N G
CL AMP POS I T I ON AU T O
S E T T I N G
:
:
V I DE O
RGB
V I DE O
RGB
:
:
V I DEO S I GNAL
V I DEO S I GNAL
SET
MENU
SELECT
SET
CHANGE
MENU
EXIT
SELECT
CHANGE
EXIT
4 Press SET to select the desired color temperature
setting.
4 Press SET to select the desired DIGITAL NR
setting.
The unit has been factory set at the MIDDLE setting.
Each time SET is pressed, the color temperature
setting changes as shown:
The unit has been factory set to the LOW setting.
Each time SET is pressed, the digital noise reduction
setting changes as shown:
3 OFF
3 MIDDLE
3 MID HIGH
3 HIGH
HIGH 2
MIDDLE 2
LOW 2
MID LOW 2
LOW 2
÷ The noise reduction effect increases in order LOW
5 Following completion of the setting, press MENU
= MIDDLE = HIGH
once again to return to the normal display.
5 Following completion of the setting, press MENU
once again to return to the normal display.
31
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
Setting the PureCinema mode
Viewing a Fast Moving Picture
(3D Y/C MODE)
When the PureCinema mode is selected, it functions
automatically to detect video signals of movies recorded at 24
frames-per-second, changing the scan settings to allow
enjoyment of higher quality movie playback. It does this by
converting the video signal to progressive scan. When using
the PureCinema function, it should odinarily be set to “HQ.”
Note, however, that due to the time required for video signal
processing, a time lag may occur with the audio signal, and if
this lag is objectionable, set the mode to “STANDARD.”
When set to OFF, only standard progressive conversion is
used.
When viewing a fast moving picture such as might be
experienced with a sports program, setting this mode to
“MOTION” will reduce picture blur and create a clearer
image.
• Set this mode to “STILL” when not viewing a fast
moving picture.
Note
3D Y/C MODE setting is possible only when INPUT4 is selected.
Note
1 Press MENU to display the menu screen.
The PureCinema mode is supported only with 480i or NTSC input
signals. This setting must be made independently for each input
(INPUT 1 – INPUT 4) used.
The menu screen appears.
MAIN MENU
INPUT4
OPTION
PICTURE
SCREEN
SET UP
1 Press MENU to display the menu screen.
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
RE S ET
RE S ET
SET
MENU
SELECT
ENTER
EXIT
2 Press 2/3 to select SET UP.
2 Press 2/3 to select SET UP.
MAIN MENU
INPUT1
OPTION
MAIN MENU
INPUT4
OPTION
PICTURE
SCREEN
SET UP
PICTURE
SCREEN
SET UP
:
I NP UT L ABEL
I NP UT
1
:
AUT O P OWER OF F OF F
:
:
I NP UT L ABEL
AUT O P OWER OF F OF F
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
I NP UT
4
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
OF F
:
:
:
:
:
M I DDL E
L OW
OF F
OF F
OF F
M I
:
CL AMP POS I T I ON AU T O
:
:
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
OT O N
3
D
Y /
C
MODE
SET
MENU
SELECT
ENTER
EXIT
SET
MENU
SELECT
ENTER
EXIT
3 Press 5/∞ to select PURECINEMA.
3 Press 5/∞ to select 3D Y/C MODE.
MAIN MENU
PICTURE
INPUT1
OPTION
MAIN MENU
PICTURE
INPUT4
OPTION
SCREEN
SET UP
:
SCREEN
SET UP
:
I NP UT L ABEL
AUT O P OWER OF F OF F
I NP UT
1
:
I NP UT L ABEL
AUT O P OWER OF F OF F
I NP UT
4
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
:
:
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
LOW
OF F
OF F
OF F
:
CL AMP POS I T I ON AU T O
OF F
:
:
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
Y
/ C MODE
M
OT O N
I
3
D
4 Press SET to set the mode to “MOTION”.
“MOTION” is set when this unit is shipped from the
factory.
SET
MENU
SELECT
CHANGE
EXIT
4 Press SET to select the desired PureCinema mode.
Each time SET is pressed, the screen mode setting
changes as shown:
Each time SET is pressed, the settings change in the
following order.
3 STILL
3 OFF
3 STANDARD
3 HQ
MOTION 2
5 When the setup is finished, press MENU to exit
5 Following completion of the setting, press MENU
the menu screen.
once again to return to the normal display.
32
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
4 Press SET to set the mode to “ON”.
Viewing in a Bright Location
(HIGH CONTRAST)
“OFF” is set when this unit is shipped from the
factory.
Each time SET is pressed, the settings change in the
following order.
When viewing a picture in a bright location, setting this
mode to “ON” will enable you to obtain a clear video
image.
• Set this mode to “OFF” when not viewing in a bright
location.
3 ON
OFF 2
5 When the setup is finished, press MENU to exit
the menu screen.
Note
The HIGH CONTRAST setting is supported only when selecting a
video input signal from a connected video component. This
setting must be made independently for each input (INPUT 1 –
INPUT 5) used.
Power Control Function
The power control function allows screen brightness to
be suppressed as a means of lowering power
consumption and reducing display deterioration.
1 Press MENU to display the menu screen.
Note
The menu screen appears.
The POWER CONTROL setting affects all input sources.
MAIN MENU
INPUT4
OPTION
PICTURE
SCREEN
SET UP
:
:
:
:
:
CONT RAST
BR I GHT .
CO LOR
T I NT
SH ARP
0
0
0
0
0
1 Press MENU to display the menu screen.
The menu will be displayed.
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
RE S ET
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
+
+
+
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
SET
MENU
SELECT
ENTER
EXIT
0
RE S ET
2 Press 2/3 to select SET UP.
MAIN MENU
INPUT4
OPTION
PICTURE
SCREEN
SET UP
SET
MENU
SELECT
ENTER
EXIT
:
I NP UT L ABEL
I NP UT
4
:
AUT O P OWER OF F OF F
:
2 Press 2/3 to select OPTION.
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
:
:
:
:
L OW
OF F
OF F
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
Y /
C
MODE
M
OT O N
I
3
D
:
:
:
POWER CONT R OL S T A NDA RD
AUT O F UNCT I ON OF F
AUD I O OUT
F I X ED
3 Press SET to select POWER CONTROL.
The unit has been factory set to the STANDARD
setting. Each time SET is pressed, the setting
changes as follows:
SET
MENU
SELECT
ENTER
EXIT
When viewing an image from INPUT1 or INPUT2, the
following screen is displayed.
MAIN MENU
INPUT1
3 STANDARD
PICTURE
SCREEN
SET UP
OPTION
:
I NP UT L ABEL
I NP UT
1
MODE 2 2
MODE 1 2
:
AUT O P OWER OF F OF F
:
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
÷ When STANDARD is set, screen brightness is
reduced in accordance with the input signal, thus
producing bright, easy-to-view images.
÷ Selecting MODE 1 reduces brightness in the same
way as the STANDARD setting, but at a even lower
levels of power consumption.
÷ MODE 2 fixes the screen brightness regardless of
the input signal. This is effective at reducing panel
deterioration due to screen burning.
OF F
OF F
:
CL AMP POS I T I ON AU T O
:
:
S E T T I N G
V I DEO S I GNAL
V I DE O
RGB
3 Press 5/∞ to select HIGH CONTRAST.
MAIN MENU
PICTURE
INPUT4
OPTION
SCREEN
SET UP
:
I NP UT L ABEL
I NP UT
4
:
AUT O P OWER OF F OF F
:
:
:
COL OR T EMP
D I G I T AL NR
H I GH CONTRAS T
P URE C I NEMA
M I DDL E
L OW
OF F
:
:
OF F
4 Following completion of settings, press MENU to
Y
/ C MODE
M
OT O N
I
3
D
return to normal screen display.
33
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
Audio Output (AUDIO OUT)
AUTO FUNCTION
The signal level produced at the AUDIO OUT terminal can
be set to FIXED or VARIABLE (linked to the VOLUME) as
desired.
This display is equipped with an optional AUTO
FUNCTION selector. When enabled, the selector
automatically switches the display’s input source to
INPUT 1 or INPUT 4 when an image signal is detected at
the INPUT 1 jack or the INPUT 4 jack.
Note
The AUDIO OUT setting affects all input sources (INPUT1– 5).
1 Press MENU;
1 Press MENU;
The onscreen menu will be displayed.
The onscreen menu will be displayed.
MAIN MENU
INPUT1
MAIN MENU
INPUT1
PICTURE
SCREEN
SET UP
OPTION
PICTURE
SCREEN
SET UP
OPTION
:
:
:
:
:
:
:
:
:
:
:
:
:
:
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
CONT RAST
BR I GHT .
0
0
6 0
6 0
6 0
0
+
+
+
R. L EV EL
+
+
+
R. L EV EL
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
G. L EV EL
B. L EV EL
H. E NHANCE
V. E NHANCE
0
0
RE S ET
RE S ET
2 Press 2/3 to select OPTION.
MAIN MENU
INPUT1
OPTION
SET
MENU
SELECT
ENTER
EXIT
PICTURE
SCREEN
SET UP
2 Press 2/3 to select OPTION.
:
POWER CONT R OL S T A NDA RD
:
AUT O F UNCT I ON OF F
MAIN MENU
INPUT1
OPTION
:
AUD I O OUT
F I X ED
PICTURE
SCREEN
SET UP
:
POWER CONT R OL S T A NDA RD
3 Press 5/∞ to select AUTO FUNCTION.
:
AUT O F UNCT I ON OF F
:
MAIN MENU
PICTURE
INPUT1
OPTION
AUD I O OUT
F I X ED
SCREEN
SET UP
:
POWER CONT R OL S T ANDARD
:
A UT O F UNCT I ON OF F
:
AUD I O OUT
F I X ED
4 Press SET to select INPUT 1 or INPUT 4.
The factory default setting is OFF. Each time SET is
pressed the selector function switches alternately as
SET
MENU
SELECT
CHANGE
EXIT
3 Press 5/∞ to select AUDIO OUT.
shown:
3 OFF
MAIN MENU
INPUT1
OPTION
PICTURE
SCREEN
SET UP
INPUT4 2
INPUT1 2
:
POWER CONT R OL S T ANDARD
÷ When OFF is selected, AUTO FUNCTION is
disabled.
:
AUT O F UNCT I ON OF F
:
A UD I O OUT
F I X ED
÷ When INPUT 1 or INPUT 4 is selected, the display
input automatically switches to the selected input
jack when a signal is detected at the selected jack.
Thereafter, the input will not change even if the
INPUT button is pressed on the remote control unit
or main unit operation panel. (In this case, “AUTO”
will be displayed on the screen.)
Once the function has switched to the selected
input by operation of the AUTO FUNCTION facility,
if the input signal is no longer detected at the
selected input jack, the function will automatically
switch back to the original input source used before
the AUTO FUNCTION facility was enabled.
SET
MENU
SELECT
CHANGE
EXIT
4 Press SET to select the desired audio level setting.
The factory default setting is FIXED. Each time SET is
pressed, the function alternates as shown:
3 FIXED
VARIABLE 2
÷ When FIXED is selected, the audio output volume
will not change, even if the setting of the display’s
VOLUME function is later changed.
÷ When VARIABLE is selected, the level of the output
signal changes in accordance with the setting of the
VOLUME function.
5 Following completion of settings, press MENU
again to return the display to its normal screen.
Note
The AUTO FUNCTION for INPUT1 is supported only when a
separate SYNC or composite SYNC analog RGB signal is input.
(When a G on SYNC or component video signal is input, AUTO
FUNCTION is disable.)
5 Following completion of settings, press MENU to
return to normal screen display.
34
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Cleaning
Troubleshooting
What may at first seem to be a malfunction, may be
remedied with a quick check.
Regular cleaning will extend the life and performance of
this unit. The recommended way to clean the display and
related parts is described below.
Please check to see if a warning is displayed on the
screen. If displayed, refer to the table below and check
the mode. If there is no display check to see if the
problem is listed on page 36. The problem may also be
caused by something other than this unit so please also
check the other components being used such as a video
deck. If the problem can still not be solved please consult
the dealer where this unit was purchased.
Before cleaning, be sure to unplug the power cord from
the power outlet.
Cleaning the display panel body and remote
control
Do not under any circumstances use solvents such as
benzine or thinner for cleaner. Use of such liquids may
cause deterioration or peeling of paint from the display or
remote control unit.
Wipe the display and remote control gently with a soft
cloth. In the case of excessive dirt buildup, dampen a soft
cloth with a diluted neutral cleaning detergent and after
wringing the cloth thoroughly, wipe the component and
then dry it with a dry soft cloth.
About the self diagnosis mode
Messages appear on the bottom of this unit’s screen to
indicate operation or connection faults. After message
confirmation, check the condition of the unit.
ERROR MESSAGE
CAUTION
OUT OF RANGE or
CAUTION
REMEDY
¶ The current input signal is
not supported by the unit.
Consult the table of
Cleaning the screen
UNSUPPORTED SIGNAL
supported computer input
signals on page 39 and set
the computer's output
signal appropriately.
After dusting, wipe the screen gently using the supplied
cleaning cloth or a soft cloth. Do not use tissue or a rough
cloth. As the surface of the screen is easily scratched, do
not rub it or hit it with a hard object.
WARNING THERMAL ALERT
¶ Turn off main power (page
7).
Cleaning the vents
¶ Is ambient temperature
too high?
¶ Remove any objects
blocking the cooling vents
on the plasma display.
As a general rule, use a vacuum cleaner about once a
month to clean the vents on the rear panel of the display
of dust buildup (set the vacuum cleaner to its weakest
setting when doing this).
WARNING FAN FAILURE
¶ Cooling fan has
malfunctioned.
Using the unit without cleaning it of dust will cause the
internal temperature to increase, resulting in possible
breakdown or fire.
Immediately turn off
power, remove power plug
from its outlet, and consult
a Pioneer service center or
your dealer.
Vents
ERROR INVALID KEY ENTRY
¶ An invalid operation has
been attempted.
(For example, when a
video signal is input,
POINT ZOOM button is
pressed.)
Vents
Vents
Vents
Check input signals,
connections and other
settings.
SHUT DOWN
¶ Turn off main power, wait
for 1-2 minutes, then try
turning power on again. If
problem persists, remove
power plug from its outlet
and consult a Pioneer
service center or your
dealer.
Vents
Illustration depicts PRO-1000HDI model.
35
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
General problems
Problem
Possible Solution
• Is the power cord disconnected? (page 16)
• No power
• Has the main power switch been switched on? (page 7)
• External influences such as lightning, static electricity, etc., may cause improper operation. In this
case, operate the unit after first turning the main power switch on/off, or unplugging the power
cord and re-plugging it in after 1 to 2 minutes.
• Unit cannot be operated.
• Are batteries inserted with polarity (+, –) correctly aligned? (page 5)
• Are batteries worn out? (Replace with new batteries).
• Is a plug connected to the CONTROL IN connector?
• Remote control does not
operate.
When a plug is connected to the CONTROL IN connector, the signal from that connector is given
priority, thus disabling the remote control signal receiver (page 16).
• Is the Auto function being used? (page 34)
• INPUT is not changed.
• Is the selected screen size correct?
• Picture is cut off.
Switch to another screen size (page 24).
• Are SCREEN mode adjustments such as picture size made correctly? (pages 28 – 29).
• Is the Point Zoom function being used? (page 25)
• Adjust the picture tone (page 27).
• Strange color, light color, or
• Is the room too bright?
dark, or color misalignment
The picture may look dark in a room that is too bright.
• Is CLAMP POSITION setup correct? (page 19)
• Power is suddenly turned
off.
• The unit’s internal temperature has increased. (Air vents are blocked.)
Remove any objects blocking vent or clean (page 35).
• Is the POWER MANAGEMENT or AUTO POWER OFF function set to ON? (page 26).
• Condensation has formed on internal parts due to suddenly increasing ambient temperature.
Allow condensation to dry thoroughly before using.
• Is connection to other components correct? (pages 9 to 15)
• Has setup been done correctly after connection? (pages 18 – 21)
• Is the correct input selected? (page 22)
• No picture
• Is a non-compatible signal being input? (pages 9, 39 – 41)
• Is picture adjustment correct? (page 27)
Problems commonly mistaken as breakdown
Problem
Possible Solution
• The screen is displayed in a
small size.
• Check the input signal compatibility chart (pages 39 – 41).
• Is the correct screen size selected? (pages 24, 28 and 29)
• Letter breakup on screen.
• Adjust using “SCREEN” mode on the menu screen (pages 28, 29).
If there is still no improvement, this unit may be limiting the displayable range. Check the
personal computer input signal compatibility chart (pages 39 – 41).
• A sharp sound is sometimes
heard from the cabinet.
• Expansion/contraction caused by surrounding temperature change may result in sound being
heard from the cabinet. This is not a malfunction.
• Bright portions of image
appear to be losing intensity.
• When the video input signal’s level is too high, the bright portions may appear to be losing their
intensity.
Increase the adjustment level of the contrast and check the picture (page 27).
• May be caused by radio wave interference from appliances with motors such as hair dryers,
electric vacuum cleaners, electric power drills, ignition systems of cars, motorcycles etc., switch
devises such as thermostats etc., neon signs or electrical discharge from power lines etc..
• May be caused by radio wave mingling from TV station, FM station, amateur radios, public radios
(simplified radios) etc., or a nearby personal computer, TV, or video/audio component.
• A strong electromagnetic field may cause picture distortion and similar problems.
• Normal sound of the cooling fan and internal sliding parts of the plasma display panel. Not a
malfunction.
• Speckles or noise appears on
screen.
• Stripes appear on the screen.
• Sound is heard from inside
the unit.
• Fan isn’t moving
• Fan is set to operate only after ambient temperature exceeds 35 °C (95 °F)(differs depending on
installation conditions). Not a malfunction.
• Fan speed changes.
• Fan speed changes automatically in accordance with ambient conditions. Not a malfunction.
36
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Although this unit incorporates high precision technology
in its design, please understand that there may be
extremely slight pixel breakup, or light emission fault.
About the plasma panel’s
protection function
The brightness of this display will deteriorate slightly
when an image with little movement such as a
photograph or computer image is continuously displayed.
This is caused by the plasma panel’s protection function
which detects images with slight movement and
automatically adjusts brightness to protect the display,
and is not a malfunction.
Note
In order to protect the panel and internal circuitry, this display is
provided with a cooling fan designed to turn on/off and change
speed automatically in accordance with ambient temperature
conditions (the fan sound will change in accordance with its
speed).
Additional cautions
The screen-saver function begins operating when the
display detects no or little screen movement for a period
of about three minutes.
• If the power is automatically turned off during operation
of this unit, the following reasons may be the cause.
1 Is the POWER MANAGEMENT or AUTO POWER
OFF function set to ON? (page 26).
CAUTION
2 Is ambient temperature too high?
Panel sticking and after-image lag
3 The internal temperature has risen abnormally due to
blocked cooling vents, overheating of internal
electronic parts, or other factors.
• Displaying the same images such as still images for a
long time may cause after-image lagging.
This may occur in the following two cases.
4 If the display is moved suddenly from a chilled
location to a warm room, or if the room temperature
rises suddenly, condensation may form on internal
parts. To protect internal circuitry, the display is
provided with a condensation detector that
automatically disables power in event of internal
condensation; in this case, allow the unit to dry
thoroughly before using.
If the power is automatically turned off for a reason
other than the above reasons, there could be a
malfunction. In this case, unplug the power cord from
the power outlet and request repair from your nearest
sales outlet.
1.After-image lagging due to remaining electrical load
When image patterns with very high peak luminance are
displayed for more than 1 minute, after-image lagging may
occur due to the remaining electric load. The after-images
remaining on the screen will disappear when moving images
are displayed. The time for the after-images to disappear
depends on the luminance of the still images and the time
they had been displayed.
2.After-image (lag image) due to burning
Avoid displaying the same image on the Plasma Display
continuously over a long period of time. If the same image is
displayed continuously for several hours, or for shorter
periods of time over several days, a permanent after-image
may remain on the screen due to burning of the fluorescent
materials. Such images may become less noticeable if
moving images are later displayed, but they will not
disappear completely.
• The plasma display panel of this unit is very bright and
viewing it a close distance will cause eye strain.
We recommend that you view the screen from a
suitable distance (9.8 to 19.7 feet (3 to 6m)).
STANDBY/ON indicator
During operation of the Power Management function, the
indicator will flash green at intervals of about 2 seconds
(page 26). If the green light displays a flashing pattern
other than the above, an error message is indicated.
Consult any onscreen messages (page 35) and check
ambient conditions (temperature, condensation, etc.) and
respond accordingly (pages 36 – 37).
When viewing at aspect ratio 4:3 continuously for numerous
hours, or for repeated short periods of time each day, some
after image may be burned into the screen. To avoid such
burning of after images in the screen, use aspect ratios other
than 4:3 whenever possible, unless necessary to avoid
infringement of copyright.
If the problem persists, disconnect the power plug and
consult your dealer or a service center.
• The power control function can be set to help prevent
damage from screen burning (page 33).
When STANDBY/ON is pressed to set the unit to the
standby mode, the indicator will flash red for several
seconds (page 22). Other than this, if the power turns off
by itself, or refuses to turn on, or if the red indicator
conditions flashing, a malfunction may be indicated.
Immediately disconnect the power plug and consult your
dealer or a service center.
37
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
2 Component video signal
Y ... 1 Vp-p/75 Ω/negative sync.
CB/PB, CR/PR
Specifications
General (PRO-1000HDI)
Light emission panel ............ 50 inch plasma display panel
... 0.525 Vp-p/75 Ω
(75% satulation level)
Number of pixels.............................................. 1280 x 768
Power supply ........................................... AC 120 V, 60 Hz
Rated current .............................................................3.2 A
Standby power consumption ...................................... 1 W
External dimensions ... 1259 (W) x 776 (H) x 104.7 (D) mm
............................. 49-9/16 (W) x 30-9/16 (H) x 4-1/8 (D) in.
Weight............................................. 46.5 kg (102 lbs. 8 oz)
INPUT 3
Input
S terminal (Mini DIN 4 pin)
• Y/C saparate video signal (NTSC)
Y . . . 1 Vp-p/75 Ω/negative sync.
C . . . 0.286 Vp-p/75 Ω
INPUT 4
Input
BNC jack
• Composite video signal (NTSC)
1 Vp-p/75 Ω/negative sync.
General (PRO-800HDI)
INPUT 5
Input
Light emission panel ............ 43 inch plasma display panel
HDMI jack
Number of pixels.............................................. 1024 x 768
Power supply ........................................... AC 120 V, 60 Hz
Rated current .............................................................2.5 A
Standby power consumption ................................... 0.9 W
External dimensions ...... 1111 (W) x 692 (H) x 104 (D) mm
....................................... 43-3/4 (W) x 27-1/4 (H) x 4 (D) in.
Weight............................................. 38.5 kg (84 lbs. 11 oz)
• Digital signal
3.3 V T.M.D.S. / 50 Ω
Audio
Input
AUDIO INPUT (for INPUT 1/2)
Stereo mini jack
L/R ... 500mVrms/more than 10 kΩ
AUDIO INPUT (for INPUT 3)
Pin jack (x2)
Input/output
Video
L/R ... 500mVrms/more than 10 kΩ
AUDIO INPUT (for INPUT 4)
Pin jack (x2)
INPUT 1
Input
Mini D-sub 15 pin (socket connector)
1 RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/CS, VD ... TTL level
L/R ... 500mVrms/more than 10 kΩ
AUDIO INPUT (for INPUT 5)
Pin jack (x2)
/positive and negative polarity
/2.2 kΩ
G ON SYNC
... 1 Vp-p/75 Ω/negative sync.
*Compatible with Microsoft’s Plug & Play
(VESA DDC1/2B)
L/R ... 500mVrms/more than 10 kΩ
Output AUDIO OUTPUT
Stereo mini jack
L/R ... 500mVrms (max)/less than 5 kΩ
SPEAKER
L/R ... 8 – 16 Ω/2W +2W (at 8 Ω)
2 Component video signal
Y ... 1 Vp-p/75 Ω/negative sync.
CB/PB, CR/PR
Control
RS-232C ... D-sub 9 pin (pin connector)
COMBINATION IN/OUT
... Mini DIN 6 pin (x2)
CONTROL IN/OUT ... monaural mini jack (x2)
... 0.525 Vp-p/75 Ω
(75% satulation level)
Output Mini D-sub 15 pin (socket connector)
75 Ω/with buffer
Accessories
Power cord ....................................................................... 1
Remote control unit ......................................................... 1
AA (R6) batteries .............................................................. 2
Cleaning cloth................................................................... 1
Speed clamps................................................................... 2
Bead bands ...................................................................... 2
Warranty........................................................................... 1
Operating Instructions...................................................... 1
INPUT 2
Input
BNC jack (x5)
1 RGB signal (G ON SYNC compatible)
RGB ... 0.7 Vp-p/75 Ω/no sync.
HD/CS, VD ... TTL level
/positive and negative polarity/
75 Ω or 2.2 kΩ
(impedance switch)
G ON SYNC ...
÷ Due to improvements, specifications and design are subject to
change without notice.
1 Vp-p/75 Ω/negative sync.
38
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
-1/2: PRO-1000HDI
Supplement 1
: Not available.
PC signal compatibilty table (INPUT1, INPUT2)
Refresh rate
Resolution
Screen size (Dot x line)
Remarks
(Dot x Line)
Vertical
Horizontal
DOT BY DOT
4:3
FULL
24.8kHz
56.4Hz
NEC PC-9800
640x400
640x480
1280x768
31.5kHz
31.5kHz
70.1Hz
60Hz
NEC PC-9800
(852x480)
640x480
800x600
1280x768
1280x768
1024x768
(864x480)
Apple Macintosh 13”
35.0kHz
37.9kHz
37.5kHz
43.3kHz
35.2kHz
66.7Hz
72.8Hz
75Hz
85Hz
56Hz
800 x600
1024x768
1024x768
37.9kHz
48.1kHz
46.9kHz
53.7kHz
49.7kHz
60Hz
72Hz
75Hz
85Hz
74.6Hz
(1072x600)
Apple Macintosh 16”
(1376x768)
832x624
852x480
1024x768
832x624
852x480
1024x768
1280x768
1280x768
1280x768
31.7kHz
48.4kHz
60Hz
60Hz
56.5kHz
60.0kHz
(60.2kHz)
68.7kHz
45.1kHz
70Hz
75Hz
(74.9Hz)
85Hz
( ) indicates Apple
Macintosh 19”
56Hz
1280x768
1280x768
48.4kHz
56.1kHz
60Hz
70Hz
: Optimal picture. Adjustment of picture position, refresh rate, phase etc., may be necessary.
: Picture will be enlarged but some fine detail will be hard to see.
39
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
-2/2: PRO-800HDI
Supplement 1
: Not available.
PC signal compatibilty table (INPUT1, INPUT2)
Refresh rate
Resolution
Screen size (Dot x line)
Remarks
(Dot x Line)
Vertical
Horizontal
DOT BY DOT
4:3
FULL
24.8kHz
56.4Hz
NEC PC-9800
640x400
640x480
1024x768
31.5kHz
31.5kHz
70.1Hz
60Hz
NEC PC-9800
(852x480)
640x480
800x600
1024x768
1024x768
768x768
(864x480)
Apple Macintosh 13”
35.0kHz
37.9kHz
37.5kHz
43.3kHz
35.2kHz
66.7Hz
72.8Hz
75Hz
85Hz
56Hz
800 x600
768x768
37.9kHz
48.1kHz
46.9kHz
53.7kHz
49.7kHz
60Hz
72Hz
75Hz
85Hz
74.6Hz
(1072x600)
Apple Macintosh 16”
(1376x768)
832x624
852x480
1024x768
832x624
852x480
1024x768
1024x768
1024x768
768x768
768x768
31.7kHz
48.4kHz
60Hz
60Hz
56.5kHz
60.0kHz
(60.2kHz)
68.7kHz
45.1kHz
70Hz
75Hz
(74.9Hz)
85Hz
( ) indicates Apple
Macintosh 19”
56Hz
1280x768
1024x768
48.4kHz
56.1kHz
60Hz
70Hz
: Input signal and screen's dot x line ratio are made to display at 1:1 ratio.
Note: The PRO-800HDI is designed with horizontally oblong elements, with the result
that the image displayed will appear more oblong than the original input signal.
: Picture will be enlarged but some fine detail will be hard to see.
: Simple reproduction. Fine detail will not be reproduced. Screen size will be displayed as
“~ (TYPE)”.
40
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Supplement 2
Video signal compatibilty table (INPUT1, INPUT2)
Refresh rate
Screen size
ZOOM
Remarks
Signal format
Vertical
FV (Hz)
Horizontal
FH (kHz)
4:3
WIDE
FULL
Component
RGB
575i / SDTV
15.625
28.1
Component
RGB
1080i / HDTV
575p / SDTV
480i / SDTV
50
Component
RGB
31.25
15.734
31.5
Component
RGB
Component
RGB
480p / SDTV
1080i / HDTV
720p / HDTV
1080p / HDTV
: Not available.
Component
RGB
60
33.75
45.0
Component
RGB
Component
RGB
67.5
Supplement 3
Digital signal compatibilty table (INPUT5)
Screen size
FULL
ZOOM
Vertical
Aspect Ratio
FV (Hz)
Remarks
4:3
WIDE
720 x 480p
60
SDTV
1280 x 720p
(59.94)
750p (720p) / HDTV
1125i (1080i) / HDTV
1920 x 1080i
: Not available.
41
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Supplement 4
Explanation of Terms
Aspect ratio
Signal assignment of INPUT 1 (Mini D-sub 15 pin
socket connector)
The TV screen’s width to height ratio is referred to as its
aspect ratio. The aspect ratio on standard TVs is 4:3 and
on wide TVs or High Definition TVs it is 16:9.
5
1
S jack (S VIDEO jack)
This jack separates and transmits the video signal as two
signals; the luminance (Y) signal and the color(C) signal.
Because of this, picture reproduction is superior to that
obtained at the composite input/output jacks.
6
10
15 11
S-video signal
Pin No.
Input
Output
The video signal is composed of two signals; the chroma
signal (color signal) which reproduces color and the
luminance signal which reproduces light and darkness.
With standard video components, these two signals are
combined into one and are handled as a video signal
referred to as the “composite signal”. The S-video signal,
however, is a signal that handles these two signals
separately. Because they are not combined as in the
composite video signal, the high quality of both signals
can be retained.
1
R or CR/PR
G or Y
+
+
+
+
+
+
+
+
2
3
B or CB/PB
4
NC (No connection)
GND
5
6
GND
7
GND
8
GND
9
DDC + 5V
GND
NC (No connection)
+
10
11
12
13
14
15
NC (No connection)
DDC SDA
HD or H/V SYNC
VD
+
Component video signal
NC (No connection)
+
General term for video signal format composed of the
Y.CB.CR, Y.PB.PR and Y.B-Y.R-Y luminance signal + color
signal.
The component video signal is sometimes simply called
the “color difference signal”.
+
DDC SCL
NC (No connection)
G ON SYNC
This indicates a video signal in the form of a
synchronization signal added to the G (GREEN) signal of
the R.G.B signal.
VGA
VGA is short for “Video Graphics Array”.
Generally this indicates a 640 dot x 480 line resolution.
XGA
General term for “eXtended Graphics Array”.
Generally this indicates a 1024 dot x 768 line resolution.
42
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
43
PRO-1000HDI / PRO-800HDI
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation.
Copyright © 2003 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
<TSZZF/03I00000>
Printed in Japan <ARB1558-B>
Download from Www.Somanuals.com. All Manuals Search And Download.
|