Operation Manual
(for touch panel operated systems)
ENGLISH
DVD Map - USA / Canada
CNDV-40MT
READ ME FIRST!
To Users Updating the Application Program
You need an AV Head Unit or Display with touch panel capabil-
ity to use this software.
Make sure to use a display suitable for this system.
This software can be used with the following models:
AVIC-9DVD, AVIC-90DVD, AVIC-80DVD, AVIC-88DVD
Please read the cautions on the next page before using the CNDV-40MT disc as
there is a possible risk that the stored user-registered data may lost upon comple-
tion of the update. Please be aware that the manufacturer cannot take any responsibility
for lost data in the event the data is lost.
Upgrading to the newer version ➞ page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
bly, decompilation, or any other means. You shall
not use the Software to operate a service bureau
or for any other use involving the processing of
data for other persons or entities.
License Agreement
PIONEER CNDV-40MT
- for U.S.A.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprietary
ownership rights in the Software. The Software is
copyrighted and may not be copied, even if modi-
fied or merged with other products. You shall not
alter or remove any copyright notice or proprie-
tary legend contained in or on the Software.
You may transfer all of your license rights in the
Software, the related documentation and a copy
of this License Agreement to another party, pro-
vided that the party reads and agrees to accept
the terms and conditions of this License Agree-
ment.
THIS IS A LEGAL AGREEMENT BETWEEN YOU,
AS THE END USER, AND PIONEER ELECTRON-
ICS (USA) INC. (“PIONEER”). PLEASE READ THE
TERMS AND CONDITIONS OF THIS AGREEMENT
CAREFULLY BEFORE USING THE SOFTWARE
INSTALLED ON THE PIONEER PRODUCTS. BY
USING THE SOFTWARE INSTALLED ON THE
PIONEER PRODUCTS, YOU AGREE TO BE
BOUND BY THE TERMS OF THIS AGREEMENT.
THE SOFTWARE INCLUDES A DATABASE
LICENSED BY THIRD PARTY SUPPLIER(S)
(“SUPPLIERS”), AND YOUR USE OF THE DATA-
BASE IS COVERED BY THE SUPPLIERS’ SEPA-
RATE TERMS, WHICH ARE ATTACHED TO THIS
AGREEMENT (Refer to page 5). IF YOU DO NOT
AGREE WITH ALL OF THESE TERMS, PLEASE
RETURN THE PIONEER PRODUCTS (INCLUDING
THE SOFTWARE, AND ANY WRITTEN MATERI-
ALS) WITHIN FIVE (5) DAYS OF RECEIPT OF THE
PRODUCTS, TO THE AUTHORIZED PIONEER
DEALER FROM WHICH YOU PURCHASED
THEM. USE OF THE SOFTWARE SHALL BE
DEEMED TO BE YOUR CONSENT TO THE
LICENSE AGREEMENT.
2. DISCLAIMER OF WARRANTY
The Software and related documentation are pro-
vided to you “AS IS”. PIONEER AND ITS LICEN-
SOR(S) (for the purpose of provisions 2 and 3,
Pioneer and its licensor(s) shall be collectively
referred to as “Pioneer”) MAKES AND YOU
RECEIVE NO WARRANTY FOR THE SOFTWARE,
WHETHER EXPRESS OR IMPLIED, AND ALL
WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR ANY PARTICULAR PURPOSE FOR
THE SOFTWARE ARE EXPRESSLY EXCLUDED.
SOME STATES DO NOT ALLOW EXCLUSION OF
IMPLIED WARRANTIES, SO THE ABOVE EXCLU-
SION MAY NOT APPLY TO YOU. The Software is
complex and may contain some nonconformities,
defects or errors. For example, the voice recogni-
tion function as implemented by the Software
may not recognize your voice. Pioneer does not
warrant that the Software will meet your needs or
expectations, that operation of the Software will
be error free or uninterrupted, or that all non-con-
formities can or will be corrected. Furthermore,
Pioneer does not make any representations or
warranties regarding the use or results of the use
of the Software in terms of its accuracy, reliability
or otherwise.
1. GRANT OF LICENSE
Pioneer grants to you a non-transferable, non
exclusive license to use the software installed on
the Pioneer products (the “Software”) and the
related documentation solely for your own per-
sonal use or for internal use by your business,
only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the Soft-
ware. You shall not loan, rent, disclose, publish,
sell, assign, lease, sublicense, market or other-
wise transfer the Software or use it in any man-
ner not expressly authorized by this agreement.
You shall not derive or attempt to derive the
source code or structure of all or any portion of
the Software by reverse engineering, disassem-
1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. LIMITATION OF LIABILITY
4. EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from Pio-
neer, nor the direct product thereof, will be
exported outside the United States except as
authorized and as permitted by the laws and reg-
ulations of the United States. If the Software has
been rightfully obtained by you outside of the
United States, you agree that you will not re-
export the Software nor any other technical data
received from Pioneer, nor the direct product
thereof, except as permitted by the laws and reg-
ulations of the United States and the laws and
regulations of the jurisdiction in which you
obtained the Software.
IN NO EVENT SHALL PIONEER BE LIABLE FOR
ANY DAMAGES, CLAIM OR LOSS INCURRED BY
YOU (INCLUDING, WITHOUT LIMITATION, COM-
PENSATORY, INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL, OR EXEMPLARY DAMAGES,
LOST PROFITS, LOST INCOME, LOST SALES OR
BUSINESS, EXPENDITURES, INVESTMENTS, OR
COMMITMENTS IN CONNECTION WITH ANY
BUSINESS, LOSS OF ANY GOODWILL, OR DAM-
AGES) RESULTING FROM THE USE OF OR INA-
BILITY TO USE THE SOFTWARE, EVEN IF
PIONEER HAS BEEN INFORMED OF, KNEW OF,
OR SHOULD HAVE KNOWN OF THE LIKELI-
HOOD OF SUCH DAMAGES. THIS LIMITATION
APPLIES TO ANY AND ALL CAUSES OF ACTION
INDIVIDUALLY OR IN THE AGGREGATE, INCLUD-
ING WITHOUT LIMITATION BREACH OF CON-
TRACT, BREACH OF WARRANTY, NEGLIGENCE,
STRICT LIABILITY, MISREPRESENTATION, AND
OTHER TORTS. IF PIONEER’S WARRANTY DIS-
CLAIMER OR LIMITATION OF LIABILITY SET
FORTH IN THIS AGREEMENT SHALL OR FOR
ANY REASON WHATSOEVER BE HELD UNEN-
FORCEABLE OR INAPPLICABLE, YOU AGREE
THAT PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50%) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRODUCT.
Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you. This warranty disclaimer and limitation of
liability shall not be applicable to the extent that
they are prohibited by any applicable federal,
state or local law which provides that such a dis-
claimer or limitation cannot be waived or
5. TERMINATION
This Agreement is effective until terminated. You
may terminate it at any time by destroying the
Software. The Agreement also will terminate if
you do not comply with any terms or conditions
of this Agreement. Upon such termination, you
agree to destroy the Software.
6. U.S. GOVERNMENT END USERS
If the Software is being acquired by or on behalf
of the United States government or any other
entity seeking or applying rights similar to those
customarily claimed by the United States govern-
ment, the Data is licensed with “Limited Rights.”
Utilization of the Software is subject to the
restrictions specified in the “Rights in Technical
Data” clause at DFARS 252.227-7013, or the
equivalent clause for non-defense agencies. Pio-
neer Electronics (USA) Inc., 2265 East220th
Street, Long Beach, CA 90810.
preempted.
7. MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No change
in this Agreement shall be effective unless
agreed to in writing by Pioneer. Pioneer retailers
do not have the authority to change this Agree-
ment. This Agreement shall be governed by and
construed in accordance with the internal laws of
the State of California. If any provision of this
Agreement is declared invalid or unenforceable,
the remaining provisions of this Agreement shall
remain in full force and effect.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
copyrighted and may not be copied, even if modi-
fied or merged with other products. You shall not
alter or remove any copyright notice or propri-
etary legend contained in or on the Software.
You may transfer all of your license rights in the
Software, the related documentation and a copy
of this License Agreement to another party, pro-
vided that the party reads and agrees to accept
the terms and conditions of this License Agree-
ment.
PIONEER CNDV-40MT
- for Canada
THIS IS A LEGAL AGREEMENT BETWEEN YOU,
AS THE END USER, AND PIONEER ELECTRON-
ICS OF CANADA, INC. (“PIONEER”). PLEASE
READ THE TERMS AND CONDITIONS OF THIS
AGREEMENT CAREFULLY BEFORE USING THE
SOFTWARE INSTALLED ON THE PIONEER
PRODUCTS. BY USING THE SOFTWARE
INSTALLED ON THE PIONEER PRODUCTS, YOU
AGREE TO BE BOUND BY THE TERMS OF THIS
AGREEMENT. THE SOFTWARE INCLUDES A
DATABASE LICENSED BY THIRD PARTY SUP-
PLIER(S) (“SUPPLIERS”), AND YOUR USE OF
THE DATABASE IS COVERED BY THE SUPPLI-
ERS’ SEPARATE TERMS, WHICH ARE
ATTACHED TO THIS AGREEMENT (Refer to page
5). IF YOU DO NOT AGREE WITH ALL OF THESE
TERMS, PLEASE RETURN THE PIONEER PROD-
UCTS (INCLUDING THE SOFTWARE, AND ANY
WRITTEN MATERIALS) WITHIN FIVE (5) DAYS OF
RECEIPT OF THE PRODUCTS, TO THE AUTHO-
RIZED PIONEER DEALER FROM WHICH YOU
PURCHASED THEM. USE OF THE SOFTWARE
SHALL BE DEEMED TO BE YOUR CONSENT TO
THE LICENSE AGREEMENT.
2. DISCLAIMER OF WARRANTY
The Software and related documentation are pro-
vided to you “AS IS”. PIONEER AND ITS LICEN-
SOR(S) (for the purpose of provisions 2 and 3,
Pioneer and its licensor(s) shall be collectively
referred to as “Pioneer”) MAKES AND YOU
RECEIVE NO WARRANTY FOR THE SOFTWARE,
WHETHER EXPRESS OR IMPLIED, AND ALL
WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR ANY PARTICULAR PURPOSE FOR
THE SOFTWARE ARE EXPRESSLY EXCLUDED.
SOME STATES DO NOT ALLOW EXCLUSION OF
IMPLIED WARRANTIES, SO THE ABOVE EXCLU-
SION MAY NOT APPLY TO YOU. The Software is
complex and may contain some nonconformities,
defects or errors. For example, the voice recogni-
tion function as implemented by the Software
may not recognize your voice. Pioneer does not
warrant that the Software will meet your needs or
expectations, that operation of the Software will
be error-free or uninterrupted, or that all non-con-
formities can or will be corrected. Furthermore,
Pioneer does not make any representations or
warranties regarding the use or results of the use
of the Software in terms of its accuracy, reliability
or otherwise.
1. GRANT OF LICENSE
Pioneer grants to you a non-transferable, nonex-
clusive license to use the software installed on
the Pioneer products (the “Software”) and the
related documentation solely for your own per-
sonal use or for internal use by your business,
only on such Pioneer products.
You shall not copy, reverse engineer, translate,
port, modify or make derivative works of the Soft-
ware. You shall not loan, rent, disclose, publish,
sell, assign, lease, sublicense, market or other-
wise transfer the Software or use it in any man-
ner not expressly authorized by this agreement.
You shall not derive, or attempt to derive, the
source code or structure of all or any portion of
the Software by reverse engineering, disassem-
bly, decompilation, or any other means. You shall
not use the Software to operate a service bureau
or for any other use involving the processing of
data for other persons or entities.
Pioneer and its licensor(s) shall retain all copy-
right, trade secret, patent and other proprietary
ownership rights in the Software. The Software is
3
Download from Www.Somanuals.com. All Manuals Search And Download.
and regulations of the jurisdiction in which you
obtained the Software.
3. LIMITATION OF LIABILITY
IN NO EVENT SHALL PIONEER BE LIABLE FOR
ANY DAMAGES, CLAIM OR LOSS INCURRED BY
YOU (INCLUDING, WITHOUT LIMITATION, COM-
PENSATORY, INCIDENTAL, INDIRECT, SPECIAL,
CONSEQUENTIAL, OR EXEMPLARY DAMAGES,
LOST PROFITS, LOST INCOME, LOST SALES OR
BUSINESS, EXPENDITURES, INVESTMENTS, OR
COMMITMENTS IN CONNECTION WITH ANY
BUSINESS, LOSS OF ANY GOODWILL, OR DAM-
AGES) RESULTING FROM THE USE OF OR
INABILITY TO USE THE SOFTWARE, EVEN IF PIO-
NEER HAS BEEN INFORMED OF, KNEW OF, OR
SHOULD HAVE KNOWN OF THE LIKELIHOOD
OF SUCH DAMAGES. THIS LIMITATION
5. TERMINATION
This Agreement is effective until terminated. You
may terminate it at any time by destroying the
Software. The Agreement also will terminate if
you do not comply with any terms or conditions
of this Agreement. Upon such termination, you
agree to destroy the Software.
6. MISCELLANEOUS
This is the entire Agreement between Pioneer
and you regarding its subject matter. No change
in this Agreement shall be effective unless
agreed to in writing by Pioneer. Pioneer retailers
do not have the authority to change this Agree-
ment. This Agreement shall be governed by and
construed in accordance with the internal laws of
the Province of Ontario and the federal laws of
Canada applicable therein. If any provision of this
Agreement is declared invalid or unenforceable,
the remaining provisions of this Agreement shall
remain in full force and effect.
APPLIES TO ANY AND ALL CAUSES OF ACTION
INDIVIDUALLY OR IN THE AGGREGATE, INCLUD-
ING WITHOUT LIMITATION BREACH OF CON-
TRACT, BREACH OF WARRANTY, NEGLIGENCE,
STRICT LIABILITY, MISREPRESENTATION, AND
OTHER TORTS. IF PIONEER’S WARRANTY DIS-
CLAIMER OR LIMITATION OF LIABILITY SET
FORTH IN THIS AGREEMENT SHALL OR FOR
ANY REASON WHATSOEVER BE HELD UNEN-
FORCEABLE OR INAPPLICABLE, YOU AGREE
THAT PIONEER’S LIABILITY SHALL NOT EXCEED
FIFTY PERCENT (50%) OF THE PRICE PAID BY
YOU FOR THE ENCLOSED PIONEER PRODUCT.
Some states do not allow the exclusion or limita-
tion of incidental or consequential damages, so
the above limitation or exclusion may not apply to
you. This warranty disclaimer and limitation of
liability shall not be applicable to the extent that
they are prohibited by any applicable federal,
state or local law which provides that such a dis-
claimer or limitation cannot be waived or pre-
empted.
4. EXPORT LAW ASSURANCES
You agree and certify that neither the Software
nor any other technical data received from Pio-
neer, nor the direct product thereof, will be
exported outside Canada except as authorized
and as permitted by the laws and regulations of
Canada. If the Software has been rightfully
obtained by you outside of Canada, you agree
that you will not re-export the Software nor any
other technical data received from Pioneer, nor
the direct product thereof, except as permitted by
the laws and regulations of Canada and the laws
4
Download from Www.Somanuals.com. All Manuals Search And Download.
THAT THE OPERATION OF THE DATA WILL BE
UNINTERRUPTED OR ERROR FREE. NO ORAL
OR WRITTEN ADVICE GIVEN BY TELE ATLAS, ITS
LICENSORS, SUPPLIERS OR ANY OF THEIR
RESPECTIVE EMPLOYEES CREATES A WAR-
RANTY OR IN ANY WAY INCREASES TELE
ATLAS’, ITS LICENSORS OR SUPPLIERS LIABIL-
ITY AND YOU MAY NOT RELY ON ANY SUCH
INFORMATION OR ADVICE. THIS DISCLAIMER
IS AN ESSENTIAL CONDITION OF THIS AGREE-
MENT AND YOU ACCEPT THE DATA ON THIS
BASIS.
Terms and Conditions for the
Tele Atlas Data
THIS IS A LEGAL AGREEMENT (THE “AGREE-
MENT”) BETWEEN YOU, THE END USER, AND
TELE ATLAS NORTH AMERICA, INC. (“Tele
Atlas”). BY USING YOUR COPY OF THE TELE
ATLAS DATA, YOU AGREE TO THE TERMS AND
CONDITIONS OF THIS AGREEMENT.
1. Grant of License.
Tele Atlas grants you a non-transferable, non-
exclusive license to use the map data and busi-
ness points of interest information (the “POIs”),
(together, the “Data”) contained on these discs,
solely for personal, non-commercial use and not
to operate a service bureau or for any other use
involving the processing of data of other persons
or entities. You may make one (1) copy of the
Data for archival or backup purposes only but
you may not otherwise copy, reproduce, modify,
make derivative works, derive the structure of or
reverse engineer the Data. The Data contains
confidential and proprietary information and
materials, and may contain trade secrets, so you
agree to hold the Data in confidence and in trust
and not to disclose the Data or any portions in
any form, including by renting, leasing, publish-
ing, leasing, sublicensing or transferring the
Data to any third party.
4. Limitation of Liability.
IN NO EVENT SHALL TELE ATLAS’, ITS LICEN-
SORS’ OR SUPPLIER’ AGGREGATE LIABILITY
FOR ALL MATTERS ARISING OUT OF THE SUB-
JECT MATTER OF THIS AGREEMENT, WHETHER
IN CONTRACT, TORT OR OTHERWISE, EXCEED
THE AMOUNT PAID BY YOU FOR YOUR COPY OF
THE TELE ATLAS DATA. TELE ATLAS, ITS LICEN-
SORS AND SUPPLIERS SHALL NOT BE LIABLE
IN ANY MATTER TO YOU FOR ANY SPECIAL,
INDIRECT, CONSEQUENTIAL OR INCIDENTAL
DAMAGES (INCLUDING DAMAGES FOR LOSS
OF BUSINESS PROFITS, BUSINESS INTERRUP-
TION, LOSS OF BUSINESS INFORMATION, AND
THE LIKE) ARISING OUT OF THIS AGREEMENT
OR THE USE OF OR INABILITY TO USE THE
DATA, EVEN IF TELE ATLAS, ITS LICENSORS OR
SUPPLIERS HAVE BEEN ADVISED OF THE POS-
SIBILITY OF SUCH DAMAGES.
2. Ownership.
The Data is copyrighted by Tele Atlas and its
licensors and they retain all ownership rights in
the Data. You agree not to alter, remove, obliter-
ate, or obscure any copyright notice or proprie-
tary legend contained in or on the Data.
5. Termination.
This Agreement will terminate immediately and
automatically, without notice, if you breach any
term of this Agreement. You agree that in the
event of termination of the Agreement, you shall
return the Data (including all documentation and
all copies) to Tele Atlas and its suppliers.
3. Warranty Disclaimer.
THE DATA IS PROVIDED ON AN “AS IS” AND
“WITH ALL FAULTS BASIS” AND TELE ATLAS, ITS
LICENSORS, AND ITS LICENSED DISTRIBUTORS
AND SUPPLIERS (COLLECTIVELY, “SUPPLI-
ERS”) EXPRESSLY DISCLAIM ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRAN-
TIES OF NON-INFRINGEMENT, MERCHANTABIL-
ITY, EFFECTIVENESS, COMPLETENESS,
6. Indemnity.
You agree to indemnify, defend and hold Tele
Atlas, its Licensors, and its Suppliers (including
their respective licensors, suppliers, assignees,
subsidiaries, affiliated companies, and the
respective officers, directors, employees, share-
holders, agents and representatives) free and
harmless from and against any liability, loss,
injury (including injuries resulting in death),
demand, action, cost, expense, or claim of any
ACCURACY, TITLE AND FITNESS FOR A PARTIC-
ULAR PURPOSE. TELE ATLAS, ITS LICENSORS
AND SUPPLIERS DO NOT WARRANT THAT THE
DATA WILL MEET YOUR REQUIREMENTS OR
5
Download from Www.Somanuals.com. All Manuals Search And Download.
kind or character, including but not limited to
attorney’s fees, arising out of or in connection
with any use or possession by you of the Data.
WARRANTY OR IN ANY WAY INCREASES HER
MAJESTY THE QUEEN AND THE MINISTER OF
NATURAL RESOURCES LIABILITY AND YOU
MAY NOT RELY ON ANY SUCH INFORMATION
OR ADVICE.
7. U.S. Government Rights.
If you are an agency, department, or other entity
of the United States Government, or funded in
whole or in part by the United States Govern-
ment, then use, duplication, reproduction,
release, modification, disclosure or transfer of
this commercial product and accompanying doc-
umentation, is restricted in accordance with FAR
12.212 and DFARS 227.7202, and by a license
agreement. Contractor/manufacturer is Tele
Atlas North America, Inc., 1605 Adams Drive,
Menlo Park, CA 94025, (650) 328-3825. The Data
is (c)1984-2003 by Tele Atlas N.V. and Tele Atlas
North America, Inc. ALL RIGHTS RESERVED. For
purpose of any public disclosure provision under
any federal, state or local law, it is agreed that the
Data is a trade secret and a proprietary commer-
cial product and not subject to disclosure.
b. Disclaimer of Liability.
IN NO EVENT SHALL THE LICENSORS,
INCLUDING HER MAJESTY THE QUEEN IN
RIGHT OF CANADA, THE MINISTER OF NATU-
RAL RESOURCES OR THEIR RESPECTIVE
OFFICERS, EMPLOYEES OR AGENTS (THE
“LICENSORS”), BE LIABLE TO YOU FOR MAT-
TERS ARISING OUT OF THE SUBJECT MAT-
TER OF THE AGREEMENTS, WHETHER IN
CONTRACT, TORT OR OTHERWISE.
THE LICENSORS SHALL NOT BE LIABLE TO
YOU FOR ANY SPECIAL, INDIRECT, CONSE-
QUENTIAL, OR INCIDENTAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF BUSI-
NESS PROFITS, BUSINESS INTERRUPTION,
LOSS OF BUSINESS INFORMATION, AND THE
LIKE) ARISING OUT OF THE AGREEMENT OR
THE USE OF OR INABILITY TO USE THE DATA,
EVEN IF THEY HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
8. Additional Provisions with respect to
Canadian Data only.
a. Warranty Disclaimer.
c. Indemnification by You.
The Data may include the data of licensors,
including Her Majesty the Queen in Right of
Canada. Such Data is provided on an “AS IS”
AND “WITH ALL FAULTS BASIS” and the licen-
sors, including HER MAJESTY THE QUEEN
AND THE MINISTER OF NATURAL
You shall indemnify and hold harmless the
licensors, including Her Majesty the Queen in
Right of Canada, the Minister of Natural
Resources and their respective officers,
employees and agents, from and against any
claim, demand or action, irrespective of the
nature of the claim, demand or action alleging
loss, costs, damages, expenses, or injury
(including injury from death) resulting from
your authorized or unauthorized use, posses-
sion, modification, or alteration of the Data.
RESOURCES EXPRESSLY DISCLAIM ALL
WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGE-
MENT, MERCHANTABILITY, QUALITY, EFFEC-
TIVENESS, COMPLETENESS, ACCURACY,
TITLE AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE DATA PROD-
UCT RESTS WITH YOU. HER MAJESTY THE
QUEEN AND THE MINISTER OF NATURAL
RESOURCES DO NOT WARRANT THAT THE
DATA WILL MEET YOUR REQUIREMENTS OR
THAT THE OPERATION OF THE DATA WILL BE
UNINTERRUPTED OR ERROR FREE. NO
ORAL OR WRITTEN ADVICE GIVEN BY HER
MAJESTY THE QUEEN, THE MINISTER OF
NATURAL RESOURCES, TELE ATLAS OR ITS
LICENSORS AND EMPLOYEES CREATES A
9. Miscellaneous.
This is the exclusive and complete Agreement
between Tele Atlas and you regarding its subject
matter. Nothing in this Agreement shall create a
joint venture, partnership or principal-agent rela-
tionship between Tele Atlas and you. The internal
laws of California shall govern this Agreement
and you consent to the jurisdiction of the North-
ern District of California or the State of California
for the County of Santa Clara. Sections 2 - 4 and 7
- 11 shall survive the expiration or termination of
this Agreement. This Agreement may be
amended, altered, or modified only by Tele Atlas.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
You may not assign any part of this Agreement
without Tele Atlas’ prior written consent. You
acknowledge and understand that the Data may
be subject to restrictions on exportation and
agree to comply with any applicable export laws.
In the event that any provision or part of a provi-
sion of this Agreement is determined to be
invalid, illegal, or unenforceable, such provision
or part thereof shall be stricken from this Agree-
ment and the remainder of this Agreement shall
be valid, legal, and enforceable to the maximum
extent possible. Any notice under this Agreement
shall be delivered by courier to Tele Atlas North
America, Inc., Attention Legal Department, 1605
Adams Drive, Menlo Park, California 94025 USA.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Selecting Destination from the Destination Histo-
ry and Address Book 31
route options, and select one 32
dress Book 38
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Navigation Sys-
Operating Your Navigation System
Troubleshooting 61
9
Download from Www.Somanuals.com. All Manuals Search And Download.
❒ The data encoded in the disc is the intellec-
tual property of the provider, and the provider
is responsible for such content.
Important Safety Information
Before using your Navigation System, be sure to
read and fully understand the following safety
information:
❒ Keep this manual handy as a reference for
operating procedures and safety information.
❒ Read the entire manual before operating this
❒ Pay close attention to all warnings in this
Navigation System.
manual and follow the instructions carefully.
❒ The navigation features is intended solely as
an aid to you in the operation of your vehicle.
It is not a substitute for your attentiveness,
judgment, and care when driving.
❒ Do not install the display where it may (i)
obstruct the driver’s vision, (ii) impair the per-
formance of any of the vehicle’s operating sys-
tems or safety features, including air bags,
hazard lamp buttons or (iii) impair the driver’s
ability to safely operate the vehicle.
❒ Do not operate this Navigation System if
doing so in any way will divert your attention
from the safe operation of your vehicle.
❒ Please remember to wear your seat belt at all
times while operating your vehicle. If you are
ever in an accident, your injuries can be con-
siderably more severe if your seat belt is not
properly buckled.
Always observe safe driving rules and follow
all existing traffic regulations. If you experi-
ence difficulty in operating the system of read-
ing the display, park your vehicle in a safe
location and make necessary adjustments.
❒ Using the most current map DVDs will allow
for most accurate destination mapping.
Update DVDs are available through your local
Pioneer dealer.
❒ Never allow others to use the system unless
they have read and understood the operating
instructions.
❒ Never use this Navigation System to route to
hospitals, police stations, or similar facilities
in an emergency. Please call 911.
❒ Never use headphones while driving.
❒ Route and guidance information displayed by
this equipment is for reference purposes only.
It may not accurately reflect the latest permis-
sible routes, road conditions, one way streets,
road closures, or traffic restrictions.
❒ Do not attempt to install or service your dis-
play by yourself. Installation or servicing of the
display by persons without training and expe-
rience in electronic equipment and automo-
tive accessories may be dangerous and could
expose you to the risk of electric shock or
other hazards.
❒ Traffic restrictions and advisories currently in
force should always take precedence over
guidance given by the navigation system.
Always obey current traffic restrictions, even if
the navigation system provides contrary
advice.
❒ Failure to input correct information about the
local time may result in the product providing
improper routing and guidance instructions.
❒ Never set the volume of your Navigation Sys-
tem so high that you cannot hear outside traf-
fic and emergency vehicles.
❒ To promote safety, certain functions are disa-
bled unless the parking brake is on.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes Before Using the System
and Additional Safety Informa-
tion
Product registration
Visit us at the following site:
Precaution
• This software can be used with the following
models:
AVIC-9DVD, AVIC-90DVD, AVIC-80DVD, AVIC-
88DVD
1. Register your product. We will keep the details
of your purchase on file to help you refer to this
information in the event of an insurance claim
such as loss or theft.
2. Receive updates on the latest products and
technologies.
3. Download owner's manuals, order product cat-
alogues, research new products, and much
more.
Failure to Operate
Should this product fail to operate properly, con-
tact your dealer or the nearest authorized Pioneer
service facility.
After-sales service for Pioneer
products
Please contact the dealer or distributor from
where you purchased the product for its after-
sales service (including warranty conditions) or
any other information. In case the necessary
information is not available, please contact the
companies listed below:
Precaution
Parking brake interlock
Certain functions offered by this Navigation Sys-
tem could be dangerous if used while driving. To
prevent them being used while in motion, there is
an interlock with your vehicle’s parking brake. If
you attempt to use these functions during driv-
ing, their onscreen touch keys may be indicated
in gray and inoperable. If so, stop in a safe place,
apply the parking brake, then operate.
Please do not ship your product to the compa-
nies at the addresses listed below for repair with-
out making advance contact.
U.S.A
CANADA
Pioneer Electronics
(USA) Inc.
Pioneer Electronics of
Canada, Inc.
To ensure safe driving
CUSTOMER SUP-
PORT DIVISION
P.O. Box 1760
Long Beach, CA
90801-1760
CUSTOMER
SATISFACTION
DEPARTMENT
300 Allstate Parkway
Markham, Ontario
L3R OP2
• To avoid the risk of accident and the
potential violation of applicable laws, the
navigation system is not for use with a
video screen (DVD video, TV, etc.) that is
visible to the driver.
800 421-1404
1-877-283-5901
• In some countries or states the viewing of
images on a display inside a vehicle even
by persons other than the driver may be
illegal. Where such regulations apply, they
must be obeyed.
For warranty information, please see the Limited
Warranty sheet included with your product.
Purchasing Software Update
The navigation system detects whether your vehi-
cle’s parking brake is engaged or not, and pre-
vents you from watching a DVD or TV on this
display while driving. When you attempt to watch
a DVD or TV, the warning VIDEO VIEWING IS
NOT AVAILABLE WHILE DRIVING will
appear on the screen.
Using the most current map DVDs will allow for
most accurate destination mapping. Update
DVDs are available through your local Pioneer
dealer.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To watch a DVD or TV on this display, park your
vehicle in a safe place and apply the parking
brake.
Features (Characteristics of this
software)
Touch panel key operation
It is possible to operate the navigation function
and the Audio function by using touch panel key.
Color difference of the map display
between day and night
Compatible with the Voice Recognition
System
Using the microphone will enable voice operation
for both the navigation and AV functions*.
*: You need a display with AV function.
Night display
Variety of View Modes
Various types of screen display can be selected
for navigation guidance.
– Map View, Driver‘s View, Route View, Guide
View
The examples in this manual are illustrated using
the daytime display. When driving at night, the
colors you see may differ from those shown.
To use this function, the Orange/white lead of the
navigation unit must be connected correctly.
Wide Variety of Facility Information for
POI Search
➲ “Day/Night Display” ➞ Page 48
You can search your destination from all areas.
About 12 million items of facility information are
supported.
About playing the DVD video
DVD videos and CDs can be played on AVIC-
9DVD, AVIC-90DVD. When using AVIC-9DVD,
refer to the DVD section in the “Operation Man-
ual” provided with AVIC-9DVD. When using AVIC-
90DVD, refer to the DVD section in their respec-
tive “Hardware Manual”.
Auto Reroute Function
If you deviate from the set route, the system will
re-calculate the route from that point so that you
remain on track to the destination.
❒ This function may not work for certain areas.
About the AV Head Unit or Dis-
play to be Connected
You need an AV head Unit or Display with a
touch panel capability to use this software. If
any display without a touch panel feature is con-
nected, the software will not work properly. Make
sure to use a display suitable for the system.
You can set an Original Image as a
Background Image
Your can store your own pictures on a
PC card in JPEG format and import original
images in this format. These imported images
can be set as a background image.
❒ Imported original images will be stored in the
memory, but saving cannot be guaranteed
completely. If original image data is deleted,
set the PC card again and re-import the origi-
nal image.
➲ “About AV Head Units /Displays to be Con-
nected” ➞ Page 57
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Overview
This manual provides the important information you need to make full use of your new Navigation Sys-
tem. The beginning sections outline the Navigation System and describe its basic operation. The later
sections describe the details of the navigation functions.
Please note that when you have decided what you want to do, you can find the page you need from the
“Table of Contents”.
If you want to check the meaning of each item displayed on the screen, you will find the necessary page
from the “Display Information” at the end of the manual.
How to use this manual
For reasons of safety, it is particularly important that you fully understand your Navigation System
before using it. Be sure to read Chapter 1 in particular.
Basic Operation
If you want to use the Navigation System immediately, please read this section. It
will explain the basis of operating the system, including items appearing on the dis-
play and how to use the different menus.
Setting a Route to Your Destination
This section describes various ways of searching the destination, changing the route search
2
conditions, and the route operation during route guidance.
Editing the Navigation Utilities
Describes convenient functions for navigation, including how to organise information on
places you have visited and how to store data on the PC card.
3
Customizing Your Navigation System
The behavior of your Navigation System depends on a number of settings. If you need to
change any of the initial settings (default settings), read the relevant section of this chapter.
4
5
Operating Your Navigation System with Voice
Describes navigation operations such as searching the destination and performing audio
operations by voice.
Appendix
Read the appendix to learn more about your Navigation System and such information as the
availability of after-care. Please see “Display Information” at the end of this manual for
checking the details of each item on the menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminology
Before moving on, take a few minutes to read the following information about the conventions used in
this manual. Familiarity with these conventions will help you greatly as you learn how to use your new
equipment.
• Buttons on your Remote Control or display are referred to as:
e.g.) NAVI (or POS) button, NAVI MENU button.
• Items in various menus or touch keys displayed on the screen are referred to like this:
e.g.) “Destination”, “Settings”.
• Extra information, alternative use and other notes are presented like this:
e.g.)
❒ After removing the disc from the slot, keep it in the case.
• The references are indicated like this:
e.g.)
➲ Setting the Route Options ➞ Page 31
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Map Discs for Navigation Sys-
tem
Configuration of data recorded
on discs
The map for this navigation system is supplied on
two discs: one for the west and the other for the
east. Please set the disc to use according to your
destination or current location.
The areas recorded on each disc are as follows:
West area disc
East area disc
❒ Removing the disc and inserting another disc
causes the navigation system to automatically
restart and reload the new route. (You cannot
cancel this “Reroute” operation.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Basic Operation
❒ You can press the TALK (or VOICE) but-
ton of the steering remote control to pro-
ceed instead of touching “OK”.
Flow from Startup to Termina-
tion
❒ The text of touch keys which are not effec-
tive is indicated in gray.
• If the program is not installed, see page 55
and install the program.
❒ Be sure to touch the touch keys with a fin-
ger. Touch keys cannot be operated by a
pen or similar object.
At first, please confirm the positions of the follow-
ing features using the navigation’s “Hardware
Manual” or display’s “Operation Manual”.
• Disc loading slot
• NAVI/AV button
• NAVI MENU button
5 Press the NAVI MENU button.
Displays the main menu.
6 Searches the destination and gives route
guidance.
1 Start the engine.
After a little time, the navigation opening
screen comes on for a few seconds. Then, a
message screen is displayed.
❒ If the disc is not set, the message asking to
insert the disc appears. After you set the
disc correctly, your Navigation System
starts up.
➲ Specifying the address and searching the
destination ➞ Page 18
➲ Searching the destination by map ➞
Page 26
➲ Other search methods ➞ Chapter 2
2 Insert the Pioneer DVD map disc to the
disc loading slot.
3 Press the NAVI/AV button to switch the
Navigation map screen.
7 Turn off the vehicle engine.
This Navigation System also turns off.
Pressing the NAVI/AV button switches
between the navigation map screen and the
audio screen.
❒ Until the vicinity of the destination is reached,
the set route will not be deleted even if the
power is turned off.
4 Check the details of the cautionary mes-
sage and touch “OK”.
You can operate the Navigation System by
touching keys displayed on the screen.
If the route is already set, it changes to route
guidance mode. The map of your surround-
ings is displayed.
➲ How to read the current position screen ➞
Page 23
➲ Time settings ➞ Page 56
➲ Starting the operation with voice com-
mands only ➞ Page 50
17
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press the NAVI MENU button to display
the main menu.
Basic Navigation
The most frequently used function is the Address
Search, in which the address is specified and the
destination searched. This section describes how
to use the Address Search and the basics of
using the Navigation System.
2 Touch “Address Search”.
Selects the method for searching the destina-
tion.
• For safety reasons, you cannot use these
basic navigation functions while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
put on the parking brake.
➲ Return Home ➞ Page 30
➲ Go to ➞ Page 30
➲ POI Search ➞ Page 27
Basic flow of operation
➲ Vicinity Search ➞ Page 28
➲ Address Book ➞ Page 31
➲ Destination History ➞ Page 31
➲ Freeway Search ➞ Page 29
➲ Telephone Search ➞ Page 30
➲ Cancel Route ➞ Page 35
1 Insert the Pioneer DVD map disc to
the disc loading slot.
2 Press the NAVI MENU button to dis-
play the Main menu.
3 Touch “Zone code key”.
If the destination is in another zone, this
changes the zone setting.
3 Select “Destination” from the Main
menu.
❒ Once the zone has been selected in the
system settings, you only have to change
zones when your destination is outside
your existing zone.
Zone code key
4 Select the method of searching for
your destination.
5 Enter the information about your des-
tination.
6 Your Navigation System sets the route
to your destination, and the map of
your surroundings appears.
4 Touch the zone code of the destination
and touch “OK”.
Modifies the zone setting and returns you to
the previous display.
7 After releasing the parking brake,
drive in accordance with the naviga-
tion information, subject of course to
the important safety instructions
18
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Input the house number and touch “OK”.
“Sym.” :
Touch the characters you wish to input.
You can input text with marks such as “&”and
“+”.
“0-9” :
You can input text with numbers.
“Back” :
Returns you to previous screen.
❒ For example, for “Early California Ct”, you can
just enter part of the name, such as “Califor-
nia”.
:
The input text is deleted letter by letter from
the end of the text. Continuing to press
deletes all of the text.
❒ While entering characters, if there is only one
possible character following the next, that
character is automatically entered.
“Back” :
❒ When touching “Back” on the text input
screen to return to the previous screen, you
may not be able to input text. In such case,
delete the letters entered in the text box.
Returns you to previous screen.
❒ Also input a prefix to the house number.
❒ If the house number you have input is not
found among subsequently selected
“Street” or “City” data, a message appears
saying that the address has not been
found. In that case, try inputting the house
number again.
Searching your destination after
specifying the name of city or area
You can narrow down the searching candidates
by initially specifying the name of city or area
where your destination is located. Inputting the
name of the town or area then selecting the desti-
nation town or area from the list returns you to
the Street Name input screen. Now input the
street name, select the street from the list, and
proceed to step 9.
❒ Touching “OK” with no input allows you to
specify and search a street name or the
name of the city or area first.
6 Input the street name.
Touch the letter you wish to input. If the next
screen is not automatically displayed even
though the street name is entered, try touch-
ing “OK”.
In the selected area, if you touch “City” without
entering the name of city or area, you can check
the list of the cities or areas, which you have
searched in the past. (This item cannot be
selected when searching for the first time with
this system or when you have selected an area
that you have never searched before.)
The input text.
The number of applicable candidates.
“City” :
Touch if you wish to first specify the destination
town or area.
:
The input text is deleted letter by letter for the end
of the text. Continuing to press deletes all of the
text.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Touch the street from the list.
❒ If the selected street is very long, and
passes through several cities or area, the
screen for entering the name of the city or
area appears.
If you did not input the house number in Step 5,
the house number input screen comes up after
the “Street” and “City” are determined. You
should now input the house number (perform
Step 5).
Scroll bar
Touching the or on the scroll bar scrolls you
through the list and allows you to view the
remaining items.
❒ If there is more than one place for the house
number input, or if there is no such house
number in that place, displays a list of a cer-
tain range. To start the route calculation,
touch the range within the list you wish to
specify as the destination.
➲ Searching the destination by map ➞ Page 26
In the case of an item that cannot be displayed in
a single line, touching the
to the right of the
item allows you to see the whole line.
❒ If only one location is found from the list,
route calculation starts after pressing the
item.
❒ You can also see the destination on the
map by touching the
list.
to the right of the
• Touching the
specifies the selected street
➲ Searching the destination by map ➞
Page 26
and streets intersecting it, allowing you to set
an intersection as your destination. This is use-
ful when you don’t know the house number of
your destination or cannot input the house
number of the specified street.
❒ If you press the NAVI (or POS) button
during route calculation, the calculation is
canceled and the map display appears.
❒ When performing a destination search
with the route already set, select whether
to make the specified area your destina-
tion and search for a new route, or search
for a route via that area.
➲ Adding way points to the route ➞ Page 35
➲ Once searched for, a location is automati-
cally stored in the “Destination History”
➞ Page 38
• Touching the
displays a map of the place
you have selected. (Candidate place names
may appear in the list screen.)
8 Input the destination town or area.
If the list screen is displayed, proceed to step
9.
9 Touch the city or area where your destina-
tion is located.
Route calculation starts. When the route cal-
culation is completed, the map of your sur-
roundings appears. (The route is displayed in
green.)
10Drive in accordance with the screen and
voice information.
Your Navigation System gives you the follow-
ing information with the timing adjusted to
the speed of your vehicle:
• Distance to the next turning point
• Direction of travel
• Road number of the freeway
• Way point (If this is set)
• Your destination
➲ How to view the screen ➞ Page 23
➲ Searching for another route ➞ Page 34
➲ Canceling route guidance ➞ Page 35
20
Download from Www.Somanuals.com. All Manuals Search And Download.
❒ Touching the
or pressing the
How to Use Menu Screens
remote control‘s GUIDE button allows you to
hear the information again.
The basic operation of the navigation is per-
formed by using menus.
There are two types of menu: the “Main menu”
and the “Shortcut menu”.
❒ If you deviate from the route with the Guid-
ance set to Route View or Guide View and
enter a street not recorded on the disc, the
screen changes to Map View. When you
return to the route, returns to the original
mode and resumes route guidance.
❒ The functions that cannot be used based on
certain conditions are indicated in gray.
❒ If you stop at a gas station or a restaurant dur-
ing the route guidance, your Navigation Sys-
tem remembers your destination and route
Information. When you start the engine and
get back on the road, the route guidance
resumes.
Main menu
You use this menu for basic operation of your
Navigation System.
1 With the map displayed, press the NAVI
MENU button.
2 To change to the menu you want to use,
touch the name of the menu displayed at
the top of the screen.
The buttons
The status of the buttons appearing on the
screen is indicated by their color.
Depending on the function the navigation is per-
forming, you can touch some buttons, while
other buttons are not available.
The main menu is divided into four:
“Destination”, “Information”, “Route
Options”, and “Settings”.
3 If you want to return to the map, press the
NAVI (or POS) (or NAVI MENU) button.
Blue touch key:
The button is operable.
Destination menu
Dark gray touch key:
The function is not available (e.g., operation is
prohibited while driving).
Select the destination search method. Also the
route has set can be canceled from this menu.
Light gray touch key:
The function is not available for areas not stored
on the disc.
➲ Specifying the address and searching the des-
tination ➞ Page 18
Touching this button activates a message indi-
cating that the function is not available.
➲ Searching the destination by map ➞ Page 26
➲ Other search methods ➞ Chapter 2
Information menu
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Used to check the route you set or check the nav-
igation status.
❒ You can use “Route Profile” and “Route
Scroll” only when a route has been entered.
➲ Checking the set route ➞ Page 33
➲ Checking the navigation status ➞ Page 45
➲ Using a PC card ➞ Page 42
:Destination
Displayed when the map is scrolled. Set the
route to the place specified with the cross
pointer.
Route Options menu
➲ Searching the destination by map ➞
Page 26
:Chg.Route
Can be selected only during route guidance.
You can add changes to the route in the route
guidance.
➲ Searching another route ➞ Page 34
➲ Detour for a specified distance ➞ Page 34
➲ Checking the route ➞ Page 33
➲ Canceling the route guidance ➞ Page 35
➲ Skipping a way point ➞ Page 36
Used to specify the conditions for setting the
route to the destination.
➲ Setting the Route Options ➞ Page 31
Settings menu
:Registration
Registering the location indicated by the
cross pointer to Address Book.
➲ Registering a place ➞ Page 38
Set the navigation functions so they can be used
easily.
:Vicinity Search
You select a location with the cross pointer.
Nearby POIs (Points Of Interest) will also be
found.
➲ Searching the facilities surrounding a cer-
tain place ➞ Page 28
➲ Settings menu ➞ Chapter 4
❒ If the contents of the menu are not fully dis-
played on the screen, touch “Next” to view
the remaining contents.
:Overlay POI
Shortcut menu
Displays on the map the mark for surrounding
facilities (POI).
➲ Viewing POI information ➞ Page 26
Shortcuts allow you to perform various tasks,
such as route calculation for the location indi-
cated by the cross pointer, or registering a loca-
tion in the Address Book, faster than using the
Main menu.
1 When the map is displayed, briefly touch
any part of the map.
If you continue to touch the map, it will start
scrolling.
➲ Moving the map to view the part you want
to see ➞ Page 25
22
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Use the Map
How to view the map of the cur-
rent location
Most of the information provided by your Naviga-
tion System can be seen on the map. You need to
get to know how the information appears on the
map.
• In Driver’s View, a small gauge with no
scale is depicted, but is not intended to be
used as a speedometer. Use the actual
speedometer of your vehicle to confirm
speed.
Switching the current position
screen display mode
This section describes how to display the current
position screen and change the map display
mode.
There are four types of map display.
• Map View
Map View
Displays standard map.
(9) (2)
(1)
(7) (6)
• Driver’s View
• Guide View (during route guidance only)
• Route View (during route guidance only)
(16)
(15)
(3)
(4)
1 Press the NAVI (or POS) button to dis-
play a map of the area around your cur-
rent position.
(8)
(11)
(5)
(10)
2 Press the NAVI (or POS) button again.
3 Touch the mode name or press the NAVI
(or POS) button to select the mode you
want to display.
Driver’s View
The map from the driver’s viewpoint is shown.
(1)
(9)
(7) (6)
(12)
(3)
(14)
(2)
(4)
❒ If the mode is selected by pressing the
NAVI (or POS) button, the screen auto-
matically switches to the selected map dis-
play mode after 4 seconds.
(8)
(5)
(10)(15)(11)
Guide View
The map of your surroundings is shown on the
left, and an arrow indicating the direction of
travel is shown on the right.
(1)
(7)
(6)
(14)
(9)
(16)
(15)
(3)
(11)
(4)
(5)
(10)
(8)
(2)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
or lower (only those cities whose detailed city
maps are registered in the map disc).
Route View
Displays the name of the street you will next
travel along and an arrow indicating the direction
of travel.
(2)
(1)
(7) (6)
Normal condition
(9)
(2)
(1)
(10) (9)
(7) (6)
(3)
(4)
(12)
(3)
(8)
(5)
(10)
(14)
(4)
Display items
Guidance point*
The next guidance point (next turning point, etc.)
is shown by a yellow flag.
(8)
(5)
(15) (11)
When approaching an intersection
(When “Close-up of Junction” is off)
(14)
Destination*
The checker-flag indicates your destination.
(13)
(1) Name of the next street to be used*
(2) Distance to the guidance point*
Touch to access the next information.
(3) Current location
The current location of your vehicle. The tip of the
(4)
(10)
(12)
triangular mark indicates your heading and the
display moves automatically as you drive.
Enlarged map of the intersection
When “Close-up of Junction” in the Settings
(4) Distance to the destination (or distance
to way point)*
If way points are set, the display changes with
menu is “On”, an enlarged map of the junction
appears. If driving on freeway, the special guide
illustration is displayed.
each touch.
(13)
(5) Name of the street your vehicle is
traveling along (or City Name, etc.)
(6) Compass
The red arrow shows North. Each touch changes
the map’s display direction. (North is UP or
Heading Up.)
(7) Map scale
The scale of the map is indicated at distance. In
(12)
Route View and Driver’s View, it shows the
scale of the map displayed on the right-hand side
of the screen. Touch to change the map’s scale.
❒ When set to Driver’s View, the system can-
not be changed to an enlarged intersection
map.
➲ Changing the map’s scale ➞ Page 25
City Map
(8) VOICE icon
Touch to change to voice recognition mode.
When driving in a city, the detailed city map is
indicated if the map scale is set to 0.05 mi (50 m)
➲ The voice operation of the navigation system
➞ Chapter 5
24
Download from Www.Somanuals.com. All Manuals Search And Download.
(9) Current time
❒ POI icon is indicated when the map scale is
0.75 mile (1 km) or lower.
(10) Estimated time of arrival (or travel time
to your destination)*
The display changes with each touch.
❒ The Direct scale key may not appear depend-
ing on the map display mode.
(11) Tracking mark
The tracking mark shows the route your vehicle
has traveled.
Moving the map to the location
you want to see
If you touch the display briefly, the shortcut menu
appears.
Touching anywhere on the map for at least 2 sec-
onds changes the map to Scroll mode and the
map begins scrolling in the direction you
touched. The scrolling stops when you remove
your finger from the screen. At this time, the
cross pointer appears at the center of the screen.
Also a line connecting between the current loca-
tion and cross pointer appears.
➲ Select the tracking setting ➞ Page 48
(12) Map of your surroundings (Side map)
Touching this takes you to the map scroll screen.
(13) Distance to an intersection*
Displayed on the enlarged intersection map. The
green bar gets shorter as your vehicle
approaches an intersection.
(14) Next direction of travel*
(15) Area to Avoid*
Pressing the NAVI (or POS) button returns you
to the map of your surroundings.
➲ About detour area ➞ Page 41
(16) Direction line
The direction towards the location set in (4) is
indicated with a straight line.
❒ Touch the area close to the center of the
screen to scroll slowly; touch near the sides of
the screen to scroll through quickly.
❒ Information with the mark (*) appears only
(2)
(1)
when the route is set.
❒ Depending on the conditions and settings,
some items may not be displayed.
(4)
Changing the scale of the map
Touching the “Map scale” key displayed on the
upper right of the screen displays the scale
gauge and “Map scale” key. Directly touching the
“Map scale” key changes the map to the selected
(3)
scale. Touching
or
on the scale gauge
(1) Scroll location
The position of cross pointer shows the location
selected on the current map.
allows you to specify the scale in greater detail
within a range of 25 yards - 1000 miles (25 meters
- 2000 kilometers).
(2) Distance from the current location
Shows the distance in a straight line between the
location indicated by the cross pointer and your
current location.
(3) The street name, city name, area name
and other information for this place.
(The case of a map scale of 0.25 mile (200 m) or
lower.)
Touching the
text.
Direct scale key
on the right displays hidden
❒ The icon of a registered location is indicated
when the map scale is 10 miles (20 km) or
lower.
➲ Displaying information on the specified loca-
tion ➞ Page 26
25
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) Shortcut menu
Finding a destination on the map
If you search the location you want to visit by
➲ How to view shortcut menu ➞ Page 22
scrolling the map, and touch
menu, you can specify your destination on the
map.
in the Shortcut
Viewing the information of a specified
location
An icon appears at registered places (home loca-
tion, specific places, address book entries) and
places where there is a POI icon. Place the cross
pointer over the icon to view detailed information.
1 Press the NAVI (or POS) button to access
the map screen.
2 Touch the map for at least 2 seconds.
The map display changes to Scroll mode.
1 Scroll the map and move the cross
pointer to the icon you want to view.
3 Scroll the map and move the cross
pointer to the place you want to make
your destination.
2 Touch
.
➲ Moving the map to view the part you want
to see ➞ Page 25
4 Touch
.
❒ If you press the NAVI (or POS) button dur-
ing route calculation, the calculation is can-
celed and the map display appears.
Information for a specified location appears.
The information shown varies according to
the location. (There may be no information for
that location.)
➲ Registering places ➞ Page 37
➲ Displaying facilities (POI) mark on the map
➞ Page 29
When the
the list
appears on the right of
You can also set a destination by touching the
to the right of the list. Touch “OK” to confirm.
The location pointed by the cross pointer will be
set as a destination.
3 Touch “Back”.
You are returned to the previous display.
Alternative option:
Scroll :
The map display changes to the map with Short-
cut menu.
If you touch anywhere on the map, the map dis-
play changes to Scroll mode.
➲ Shortcut menu ➞ Page 22
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Setting a Route to Your Destination
Searching for Points of Interest
(POI)
• For safety reasons, these route-setting
functions are not available while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
put on the parking brake before setting
your route.
1 Touch “Destination” in the Main menu,
and then touch “POI Search”.
2 Touch the zone code key of the destina-
tion and touch “OK”.
➲ Selecting the zone where you want to
search ➞ Page 18
❒ Some information on traffic regulations by
days or time depends on the time when the
route calculation is performed. Thus, the
information may not correspond with a cer-
tain traffic regulation when your vehicle actu-
ally passes the location. Also, the information
on the traffic regulations provided will be for a
passenger vehicle, and not for a truck/lorry or
other delivery vehicles. When driving your
vehicle, follow the actual traffic regulations.
3 Touch “Category”.
Category
❒ If you press the NAVI (or POS) button dur-
ing route calculation, the calculation is can-
celed and the map display appears.
“Name” :
Touch if you wish to first specify the POI
Name.
“City” :
Finding Your Destination by
Selecting the Type of Facility
Touch if you wish to first specify the destina-
tion town or area.
Information about various facilities (Points Of
Interest - POI), such as gas stations, amusement
parks or restaurants is available. By selecting the
category (or entering the POI Name), you can
search for a Point Of Interest.
4 Touch the desired category.
POI’s are divided into several categories.
❒ You can also narrow down the search range
by initially specifying the name of the city or
area where your destination is located.
If the category is not sub-divided into more
detailed categories, the list will not be dis-
played. Proceed to Step 6.
5 Touch the subcategory.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Input the name of the POI.
If the list does not automatically appear when
the name of the POI has been entered, try
touching “OK”.
3 Touch POI.
Names of POIs and their distance from your
current location appear. They are listed in
nearest-to-furthest order. To the left of each
item is an icon indicating the category.
“City” :
First, touch to specify the destination town or
area.
7 Touch POI for your destination.
❒ Touching the
displays a map of the
surroundings of the selected POI.
➲ Searching the destination by map ➞
Page 26
Distance to the facility
❒ If the selected POI is the name of a chain
of outlets and consequently the same
store name applies to different locations
(the number of outlets appears next to the
chain’s name), touch the name of the POI
to display a list of those POIs and touch
the particular POI that is your destination.
❒ When you touch
, the POIs around the
specified location are shown on a map.
➲ Searching the destination by map ➞
Page 26
❒ Searching range is approximately 10 miles
(16 km) square from the current location.
Finding a POI in your surround-
ings
You can search for Points Of Interest in your sur-
roundings on the map. Use it to find a POI to visit
during a journey.
Searching the facilities around
the cross pointer
1 Scroll the map and move the cross
pointer to the place you want to search
POI.
1 Touch “Destination” in the Main menu,
and then touch “Vicinity Search”.
The list of Points Of Interest categories
appears.
2 Touch
.
See Step 2 of “Finding a POI in your surround-
ings” for the following operations.
➲ Finding a POI in your surroundings ➞
Page 28
2 Touch the category.
The selected category will have a red check
❒ The distance indicated in the search result
is the distance from the cross pointer to
the facility.
❒ “Vicinity Search” in the Main menu
searches your surroundings. On the other
mark.
OK:
Starts searching
Back:
Returns to the previous screen
❒ If you want to search with more detailed
hand, in the case of
menu (➞ Page 22), the area around the
cross pointer will be searched.
in the Shortcut
categories, touch
. When the subcate-
gory list appears, touch the item and touch
“Back”. When only a few types of the
detailed categories are selected, blue
check marks will appear.
❒ You can select the detail category for up to
100 items.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying certain points of
interest on the map
Setting an Entrance or Exit of a
Freeway as Your Destination
Selected Points Of Interest (POI) in a certain cat-
egory can be shown on the map, and you can
check the location on the display while driving.
You can set the entrance or exit of a freeway as
your destination.
1 Touch “Destination” in the Main menu,
and then touch “Freeway Search”.
The display for entering the name of the free-
way appears.
1 Touch any part of the map screen.
The Shortcut menu appears.
2 Touch
.
The list of POI categories appears.
2 Touch the zone code key of the destina-
tion and touch “OK”.
3 Touch the category you want to display.
The selected item is marked. If you want to
select other categories, repeat this step.
❒ If you want to search with more detailed
3 Enter the name of the freeway and touch
“OK”.
The list of freeways matching the name
appears.
categories, touch
. When the subcate-
gory list appears, touch the item you want
to display and touch “Back”.
❒ You can select the detail category up to
100 items.
4 Touch the freeway.
The display for selecting your destination to
the entrance or to the exit of the freeway
appears.
4 Touch “Back”.
POI’s in the selected category appear on the
map.
5 Touch “Entrance” or “Exit”.
The list of entrances to, or exits from, the
selected freeway appears.
➲ Searching the destination by map ➞
Page 26
6 Touch your destination.
➲ Viewing the information of POI ➞ Page 26
❒ When some sub-categories are selected,
the corresponding category is marked
blue. When all the sub-categories within a
category are selected, that category is
marked red.
❒ You can also see the destination by touch-
ing the
on the right of the list.
➲ Searching the destination by map ➞
Page 26
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for Your Destination
by Specifying the Telephone
Number
Route Calculation to Your Home
Location or to Your Favorite
Location
If you know the telephone number of your desti-
nation, you can quickly search for your destina-
tion by specifying the telephone number.
If your home location is registered, the route
home can be calculated by a single touch of the
touch key from the Main menu. Also, you can
register one location, such as your workplace, as
your favorite location, and the route is calculated
in a similar way.
1 Touch “Destination” in the Main menu,
and then touch “Telephone Search”.
The telephone number entry screen appears.
1 Touch “Destination” in the Main menu,
and then touch “Return Home” or “Go to”.
2 Input a telephone number.
❒ If there is more than one place for the
number input, a list of those places is dis-
played. Touch the item you want in the list
and proceed to step 3.
➲ “Registering your home and your favorite loca-
tion” ➞ Page 37
3 If the displayed place is satisfactory,
touch “OK”.
Touching “Scroll” changes the destination.
➲ Searching the destination by map ➞
Page 26
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Destination from the
Modifying the Route Calculation
Destination History and Address Conditions
Book
You can change the route calculation conditions
using the Route Options menu. The following
description features an example of changing the
number of the route to be searched.
Any place that has been searched before is
stored in the “Destination History”. Places that
you have registered manually, such as your
home, are stored in the “Address Book”. Simply
select the place you want to go to from the list
and a route to that place will be calculated.
1 Touch “Route Options” in the Main menu.
The Route Options menu appears.
2 Touch “Number of Routes”.
The content currently set appears under the
name of the item. Each time you touch the
item, the setting changes. Repeatedly touch
the item until the value you want to set
appears.
1 Touch “Destination” in the Main menu,
and then touch “Address Book” or
“Destination History”.
2 Touch your destination name.
Route calculation starts.
➲ For information on the Address Book ➞
Chapter 3
➲ For information on the Destination His-
tory ➞ Chapter 3
Items that users can change
This section describes the details of the setting
for each menu. Settings marked with an asterisk
(*) show that they are default or factory settings.
❒ You can also see the destination by touch-
ing the
on the right of the list.
➲ Searching the destination by map ➞
Auto Reroute
Page 26
This setting controls whether, when you stray
from the guided route, the system automatically
recalculates the route to your destination.
On* :
Auto Reroute function is turned on.
Off :
Auto Reroute function is turned off.
Avoid Freeway
This setting controls whether or not freeways may
be included in the road calculation. (A route
using freeway may be calculated in some cases,
such as when setting your destination far away.)
On :
Calculate a route that avoids freeways.
Off* :
Calculate a route that may include freeways.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Avoid Ferry
Perform the route calculation of
the several route options, and
select one
This setting controls whether or not ferry cross-
ings should be taken into account.
On :
Calculate a route that avoids ferries.
Off* :
Calculate a route that may include ferries.
You can get route calculations of several route
options. After route options are calculated, select
the one you want.
1 Set the “Number of Routes” to
“Multiple”.
Route Condition
This setting controls whether the fastest or the
shortest route should be calculated.
Fastest* :
➲ Changing the search conditions ➞
Page 31
Calculate a route with the shortest travel time to
your destination as a priority.
Shortest :
Calculate a route with the shortest distance to
your destination as a priority.
2 Search your destination and set the route.
Calculated routes are shown in different
colors (from two to six routes).
3 Touch “Next” to change the displayed
route.
Number of Routes
This setting controls whether the system should
calculate only one route, or several routes.
1*:
Only one route judged as being optimum by your
Navigation System is calculated.
Multiple :
Several route options are calculated (maximum 6
routes).
(1) (3) (2)
The following information is displayed on this
screen:
(1)Route calculation condition
Displaying the conditions set by the Route
Options menu by icon.
Avoid Toll Road
This setting controls whether or not toll roads
should be taken into account.
On :
Calculate a route that avoids toll roads.
Off* :
Calculate a route that may include toll roads.
• Use/avoid freeway
• Use/avoid toll road
• Use/avoid ferry
Displaying impracticability of fulfilling the
conditions by icon.
Designate Areas to Avoid
➲ About Areas to Avoid ➞ Page 41
• Pass through Area to Avoid
• Use toll road against the setting “Avoid
Toll Road” is “On”.
(2)Distance to your destination
(3)Travel time to your destination
❒ The “Avoid Freeway” setting may not be
reflected, depending on the distance to the
destination.
❒ You can see other places while displaying
a candidate route by scrolling the map.
Touching “Next” moves the next candi-
date route to the center and indicates the
map.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Touch “Information” to check the infor-
mation on the selected route.
Checking the Set Route
You can also check details of the roads along
the selected route. (If you touch “Back”, you
can return to the previous display.)
You can check information about the route
between your current location and your destina-
tion.
➲ “Route Scroll” ➞ Page 33 (Step 3 and 4)
➲ “Route Profile” ➞ Page 34 (Step 3 and 4)
❒ After the route is calculated, it may take
some time until the detailed route informa-
tion (Route Profile) can be confirmed.
You can select two methods: checking the pass-
ing streets with a list; and checking the shape of
the route by scrolling the map along the route.
Checking the set route with the
map
5 Touch “OK”.
The route you selected is accepted, and the
map of your surroundings appears. When you
start driving, the route guidance begins.
❒ If the above operations are not performed
within 30 seconds after the route calcula-
tion is completed and you have already
started your vehicle, the route selected at
the time is automatically chosen.
1 Touch the map screen.
The Shortcut menu appears.
2 Touch
.
The Route/Detour menu appears.
3 Touch “Route Scroll”.
The screen to select the point to start scrolling
appears.
4 Touch the point to start scrolling.
(1) (3) (2)
You can select the following items:
(1) Starting Point
(2) Way Point (If this is set)
(3) Destination
❒ If you have selected “Way Point”, a list of
the way points on the route is displayed.
Touch the place you want to start scrolling
from and proceed to step 5.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Touch
map.
or
to scroll the
5 Touch “Back”.
You can return to the previous display.
❒ When a long distance route is calculated,
your Navigation System may not be able to
list all the roads. (In this case, the remain-
ing roads will be shown in the list as you
drive on.)
To continue scrolling after you remove your
finger, touch and hold or
If necessary, the scale of the map can be
changed.
.
Checking the set route from the
Information menu
You can also check the information about the set
route from the Information menu.
Current Route
Cross Pointer
1 After touching “Information” in the main
menu, touch “Route Profile” or “Route
Scroll”.
You can select the following items:
Map :
The scroll screen is displayed.
➲ Searching the destination by map ➞
Page 26
2 Check the contents on the display.
➲ “Route Scroll” ➞ Page 33 (Step 3 and 4)
➲ “Route Profile” ➞ Page 34 (Step 3 and 4)
6 Touch “Back”.
3 Touch “Back”.
You can return to the previous display.
You can return to the previous display.
Checking the set route with text
This function is not available if your vehicle has
deviated from the set route.
Recalculating the Route to Your
Destination
You can recalculate the route to avoid a traffic
jam or road works ahead. You can set the length
of the area, and avoid just that area, or you can
even search a new route from the current loca-
tion to your destination. (On the map screen dur-
ing route guidance, try the following operations.)
1 Touch the map screen.
The Shortcut menu appears.
2 Touch
.
The Route/Detour menu appears.
3 Touch “Route Profile”.
1 Touch the map screen.
The Shortcut menu appears.
4 Check the contents on the display.
As necessary, scroll the list.
2 Touch
.
Name of the streets you are driving through
The Route/Detour menu appears.
3 Touch “Reroute” or the distance from the
list.
Driving distance
34
Download from Www.Somanuals.com. All Manuals Search And Download.
After the route is calculated, the map screen
shows your surroundings and route guidance
is resumed.
Adding Way Points to the Cur-
rent Route
On this display, you can select the following
items:
Reroute :
The route from the current position to your
destination is recalculated.
You can select way points (locations you want to
visit on the way to your destination) and you can
recalculate the route to pass through these loca-
tions.
The distance of the detour (1-50 mile/km) :
Searches detours of a specified distance in
the route ahead of your current position.
Adding a way point
You can add up to five way points. This is
achieved as follows :
➲ For details of switching the display between
“mile” (miles) and “km”. “KM/Mile Setting”
➞ Page 49
1 Specify the location you want to visit.
Specify a way point in the same way as speci-
fying a destination.
At completion of the location search, a mes-
sage is displayed asking whether or not to set
that specified location as the destination, or
as a pass-through location.
Canceling the Route Guidance
If you no longer need to travel to your destination
or if you want to change your destination, follow
the steps below to cancel the route guidance.
2 Touch “Way Point”.
1 Touch “Destination” in the Main menu,
then touch “Cancel Route”.
3 Confirm the contents of the list, and touch
“Done”.
The message confirming whether to cancel
the current route appears.
2 Touch “Yes (all)”.
Route calculation with the specified location
as a way point starts when you touch “Done”.
On this display, you can select the following
items:
The current route is deleted, and a map of
your surroundings reappears.
On this screen, you can also select the follow-
ing items:
Add :
Return to Destination menu and add way
points (you can add up to five way points).
Delete :
Yes (one) :
You can delete way points from the list.
Sort :
Route is recalculated by canceling the
selected way point.
You can sort your destination and way points.
The system will put the nearest point (dis-
tance in a straight line) from the current loca-
tion to way point1, and sort the other points
(including your destination) in order of dis-
tance from way point1.
No :
Returns to the previous display without delet-
ing the route.
❒ You can also cancel the route using the
Ch.Route in the shortcut menu.
Original :
You can return the way points and destination
to their original order.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping a way point
If the points are set, the next way point along the
route can be skipped.
1 Touch the map screen.
The Shortcut menu appears.
2 Touch
.
The Route/Detour menu appears.
3 Touch “Skip Way Point”.
A message asking whether you want to skip
the next way point appears.
4 Touch “Yes”.
A new route to your destination through all
the remaining way points, except for the
skipped way point, is calculated.
Deleting a way point from the
route
If you no longer need to pass through a way point
you have not yet reached, you can delete that
place from the list of way points and calculate a
new route.
1 Touch “Destination” in the Main menu,
then touch “Cancel Route”.
A message asking whether you want to can-
cel the route appears.
2 Touch “Yes (one)”.
3 Touch the way point you want to delete.
❒ If you want to delete other way points,
touch “Delete” and repeat Steps 3 above.
4 Touch “Done”.
A new route to your destination via the
remaining way points is calculated.
❒ You can also cancel the route using the
Ch.Route in the shortcut menu.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Editing the Navigation Utilities
1 Touch “Settings” in the Main menu, then
touch “Go to”.
• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the parking
brake before setting your route.
When registering your home location, touch
“Return Home”.
Editing Registered Locations
The Address Book can store up to 300 regis-
tered locations. These can include home loca-
tion, favorite places, and destinations you have
already registered. This registered location infor-
mation can also be modified. Also, routes to reg-
istered locations can be calculated by touch
screen or voice. Registering places you visit fre-
quently saves your time and effort.
You can select a method of location search on
the display.
❒ The items already registered under
“Return Home” or “Go to” can be modi-
fied.
2 Search for a location to register.
➲ Information on searching locations to reg-
ister ➞ Chapter 2
❒ You can register up to 100 entries for voice
operation (when available).
3 Point the cross pointer to the location you
want to register and touch “OK”.
Completes the registration and returns to the
previous display.
Registering your home and your
favorite location
❒ Items registered under “Go to” can be
edited and used for voice recognition.
➲ “Editing a location’s information” ➞
Page 38
Of the 300 registered locations that can be
stored, home location and favorite locations can
be stored separately in the Address Book. Reg-
istering your favorite location for the first time is
described here. You can change the registered
information later. You might find it useful to reg-
ister your workplace or a relative’s home as your
favorite location.
Map icons:
:
Home location icon
:
Favorite location icon
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering a previous location
in the Address Book
Once a destination or way point is searched, it is
automatically retained and stored in the
Destination History. If a search is canceled
while still in progress, only the places where the
map was displayed and scrolled through or
places where the short-cut menu was displayed
are retained and stored. Note that after 100
places are stored, new places are automatically
overwritten on top of old ones, in oldest to most
recent order. Therefore, to ensure that certain
places are kept and not overwritten, be sure to
register them in the Address Book.
Editing a location’s information
In the Address Book menu, touching the
the right-hand side of the place displays the
Address Book Operate menu.
on
To edit the information about the location:
1 Touch “Destination” in the Main menu,
then touch “Address Book”.
2 Touch
on the right-hand side of the
place whose information you want to edit.
1 Touch “Destination” in the Main menu,
then touch “Destination History”.
2 Touch
on the right-hand side of the
place you want to register in the Address
Book.
:
The information related to that place can be
edited.
:
The map of that place can be displayed.
➲ Searching the destination by map ➞
Page 26
:
Displayed on the left-hand side of places that
can be searched by voice command.
:
That place can be registered or deleted.
3 Touch “Edit Information”.
:
The map of that place can be displayed.
➲ Searching the destination by map ➞
Page 26
3 Touch “Registration”.
Registration is now complete.
➲ “Editing a location’s information” ➞
Page 38
The Address Information menu appears.
Refer to the item corresponding to the subse-
quent operation. After finishing the operation,
the Address Book menu appears. You can
continue to edit other information items if
necessary.
➲
in the Shortcut menu ➞ Page 22
38
Download from Www.Somanuals.com. All Manuals Search And Download.
The details you set are registered, and the
Address Book menu appears.
Alternative options :
1
2
3
4
5
No :
Select to return to the display for entering
characters.
Repeat :
You can reconfirm the pronunciation of the
name you entered.
1. Name
The name can be used as a command for
voice operation.
❒ When you select “Yes”,
is shown on the
2. Address
The address is registered when the search
was made for the first time. (Not editable.)
3. Phone number
You can search by registered telephone
left side of the location name displayed in the
Address Book menu. This mark indicates that
this name can be used as a voice command
during voice operation.
number.
4. Pictograph
The symbol displayed on the map.
➲ You can also store locations in the Address
Book on a PC card ➞ Page 42
❒ You cannot change the name of your home.
5. Sound
The selected operating sound is played.
❒ During voice operation, you can get a route
❒ Apart from the Address, these items can
calculated by saying the registered name.
be edited freely.
➲ Information on voice operation ➞ Chapter 5
Changing a name
Entering or changing a phone number
1 Touch “Edit Phone Number”.
1 Touch “Edit Name” and touch “Yes”.
The message confirming whether or not to
register the entered name as voice command
is displayed.
2 Input a phone number; touch “OK”.
The Address Information menu appears.
❒ To change a registered phone number,
delete the existing number and then enter
a new one.
Alternative option :
No :
When not registering a name as a voice com-
mand, select “No”.
Selecting a pictograph to appear on the
map
2 Enter a new name; touch “OK”.
The name of the current location appears in
the text box. Delete the current name, and
enter a new name between 6 and 23 charac-
ters long. (If you selected “No” in Step 1, you
can enter a new name between 1 and 23 char-
acters long.)
1 Touch “Select Image”.
2 Touch the Pictograph to appear on the
map.
The Address Information menu appears.
❒ You cannot change the mark of your home
or of your favorite location.
3 If the pronunciation is correct, touch
“Yes”.
Selecting sound
1 Touch “Select Sound”.
2 Select the sound.
The Address Information menu appears.
If you want to hear the operating sound, touch
.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Address Book or
Destination History Information
Items registered in the Address Book or
Destination History can be deleted. All entries
of the data in the Address Book or Destination
History can be deleted at once.
Changing the position of loca-
tions registered in the Address
Book
You can select a location registered in the
Address Book, display a map of its surround-
ings, and change its position.
1 Touch “Destination” in the Main menu,
then touch “Address Book”.
1 In the Address Book menu, touch
on
the right-hand side of the place whose
position you want to change.
To delete items in the Destination History,
touch “Destination History”.
2 Touch “Modify Location”.
The map of the selected area and its sur-
roundings appears.
2 Touch
on the right-hand side of the
place you want to delete.
3 Select the deletion method.
3 Touch the display to change its position,
then touch “OK”.
A message confirming deletion appears.
The position is changed.
Alternative options :
Delete This Item :
Delete the location selected in Step 2.
Delete All Address Book Entries (or
Delete All Destinations) :
Delete all the Address Book or Destination
History data.
4 Select “Yes”.
The data you selected is deleted.
Alternative option:
No :
The display shown in Step 3 appears.
❒ Because deleted data cannot be restored,
take extra care not to select “Delete All
Address Book Entries” by mistake.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Scroll the map, adjust the position of the
red frame, and touch “OK”.
Setting Areas to Avoid
If you register Areas to Avoid, such as crowded
intersections or congested areas, routes can be
calculated that avoid those areas. Areas to
Avoid can be set from the Route Options menu.
❒ An area not stored on the disc cannot be set
as an Area to Avoid.
If you want to stop registration, touch “Back”.
Registering an Area to Avoid
This section describes how to register an Area to
Avoid for the first time. You can register up to five
Areas to Avoid.
❒ Depending on the setting of route search con-
ditions, you may not be able to avoid the spec-
ified areas. The confirmation message is
displayed on the screen at this time.
➲ Information on route calculation conditions ➞
1 Touch “Route Options” in the Main menu,
then touch “Designate Areas to Avoid”.
Page 32
2 Select one of the items shown in “New
Area”.
Changing or deleting an Area to
Avoid
You can subsequently change/rename/delete an
Area to Avoid.
When registering for the first time, any item
on the list is shown as “New Area”.
1 Touch “Route Options” in the Main menu,
then touch “Designate Areas to Avoid”.
2 Select the area you want to change or
delete.
3 Select the desired operation.
3 Select the place to register and display
the map.
➲ Searching places to register ➞ Chapter 2
Once a search is complete, a map with the
specified location at its center appears.
4 Change the map scale and decide the size
of the Area to Avoid.
On this screen, you can select the following
options:
Rename :
The Area to avoid is enclosed in a red frame.
Changes the name. Enter the new name and
touch “OK”. This returns you to the Route
Options menu.
You can also change the map scale though
the maximum map scale for registering Areas
to Avoid is 0.1 mile (100 m).
Change :
A specified area can be changed. For the next
steps, see Step 3 in the “Registering an Area
to Avoid” above.
Delete :
Delete the selected Area to Avoid.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Touch “Information” in the Main menu,
then touch “PC card” and “Save to PC
Card”.
Using a PC Card
You can store the following information on a PC
Card (sold separately):
• Locations registered manually such as your
home, your favorite location, or a location
whose information was edited (Registered
Locations)
2 Touch the desired item for storage.
Free space in the PC card
• Background image when navigation or audio
is operated (Background Picture)
• The PC card is very useful for sharing the data
in the Address Book with friends or for stor-
ing the data as backup.
• If a PC card is not inserted in the navigation
system correctly, PC card functions are not
available.
Number of groups you can store
The selected entry is marked. To register other
locations, repeat this step.
Alternative option:
All :
All the locations are selected (or canceled) at
once.
Initializing a PC card
Before using a brand new PC card, you must ini-
tialize it.
1 Touch “Information” in the Main menu,
then touch “PC card” and “Initialize PC
Card”.
3 After finishing the selection of locations,
touch “OK”.
❒ Do not stop the engine until initialization of
the PC card is complete.
4 Touch “New Group”.
❒ If the data is to be stored in a group
already registered in the PC card, select
the group name in the list.
2 Touch “Yes”.
Once initialization is complete, a message to
select the operation of the PC card automati-
cally appears. (If you want to cancel the initial-
ization, touch “No”.)
5 After entering a group name, touch “OK” .
The data of the registered location is stored in
the entered group.
Storing the data of registered
locations in the PC card
You can select any entry registered in the
Address Book and store the data on the PC
card. Data can be stored in groups. A new group
can be created.
Loading registered locations
data from a PC card
Address Book data stored on a PC card can be
loaded to the Navigation System.
➲ “If a message about the PC card is displayed”
➞ Page 64
❒ The volume of data you can register depends
on the capacity of the PC card.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Touch “Information” in the Main menu,
then touch “PC card” and “Read from PC
Card”.
Changing Background Picture
In the menu operation screen, you can indicate a
picture you like on the background. Some pic-
tures are already stored, but you can also use pic-
tures (JPEG format data) created by a personal
computer or a digital camera. The following two
types of background pictures can be changed:
• AV Background : Background for the screen
during the operation of audio, or during play-
back.
The list of groups appears.
2 Touch the desired group.
3 Touch the desired locations.
• Navigation Background : Background of
navigation menu screen.
Several background pictures are stored in the
Pioneer DVD map disc.
Selected locations are marked. To load the
data from other locations, repeat this step.
Here, a method of changing background picture
is described with an example of loading the pic-
ture stored on a PC card to the navigation system
as the background picture.
Alternative option:
All :
All the locations are selected (or canceled) at
once.
❒ The “AV Background” cannot be used with
the AVD-W6210.
4 Touch “OK”.
❒ When storing original pictures on a PC card,
create a folder named “BG” in a PC card, and
store the picture files in this folder. Up to 20
picture files can be used in the BG folder.
The data of the selected locations is stored in
the Address Book.
Deleting PC card data
You can delete data for a specified location or a
whole group.
1 Insert a PC card into the PC card slot.
2 Touch “Settings” in the Main menu, then
touch “Background Picture Setting”.
The picture selected for each screen is indi-
cated on the right side of “AV Background”
and “Navigation Background” items.
1 Touch “Information” in the Main menu,
then touch “PC card” and “Delete PC
Card Data”.
2 Touch a group where the location you
want to delete is stored.
3 Touch “Navigation Background” or “AV
Background”.
3 Touch a location you want to delete and
touch “OK”.
The selected location is marked. To delete
other locations, repeat this step.
Alternative option:
All :
Select (or cancel) all locations in a group.
4 Touch “Import from PC card”.
The list of the pictures stored in a PC card is
displayed.
4 Touch “Yes”.
The specified location is deleted.
On this screen, you can select the following
item:
Back to Original :
The picture when purchased is selected.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
❒ In step 4, touching other than “Import
from PC card” allows you to select a
background image stored on the Pioneer
DVD map disc.
❒ Pictures up to a maximum of 2048×1536 pix-
els can be used. We cannot guarantee a
proper operation for a picture bigger than this
size.
❒ Progressive format JPEG pictures cannot be
5 Touch a picture you want for the back-
ground.
used.
❒ When changing a picture starts, do not cut off
the vehicle engine until the message inform-
ing the completion of changing a picture is
indicated.
6 Select how to display the picture.
You can select the following items:
“Center” :
Selected picture is displayed at the center of
the screen.
“Repeat” :
❒ When the Navigation System is reset, or the
language setting is changed, the background
picture may change back to the original pic-
ture. (There is also a possibility that the sys-
tem will revert to the original picture for some
other reason). If this happens, set the back-
ground picture again.
Selected picture is patterned, and displayed
as covering the whole screen.
❒ When selecting images already stored on
the Pioneer DVD map disc, you cannot
select the layout method for those images.
The background image starts changing. After
a short while, the new background image
appears.
7 Touch “Done”.
On this screen, you can select the following
items:
Select another Picture :
This is selected when you want to change to
another picture. Return to Step 5.
Change to another background :
Select if you want to successively change the
Audio Operating screen backgrounds or the
Navigation backgrounds. Return to step 3.
❒ Only JPEG format (“.jpg” or “.JPG”) pictures
can be used as a background picture.
❒ You can only use standard characters (alpha-
bets of both cases: A-Z, a-z) and numbers (0-9)
for the file name of a background picture
(international (accented) characters cannot
be used).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Navigation Status
To clear values...
The navigation status, including the driving sta-
tus of a vehicle, positioning status by satellite,
learning status of the 3D sensor, and cable con-
nection status can be checked.
If you want to delete the learned results stored in
“Distance”, “Speed Pulse” or “Learning Sta-
tus”, touch the relevant result, then touch
“Clear”.
Checking sensor learning status
and driving status
❒ The navigation system can automatically use
two types of sensor memory based on the
outer dimensions of the tires.
1 Touch “Information” in the Main menu,
then touch “3D Calibration”.
The 3D Calibration screen appears.
Checking the connections of
leads and installation positions
1
2
3
Check that leads are properly connected between
the main unit and the vehicle. Please also check
whether they are connected in the correct posi-
tions.
4
1 Touch “Information” in the Main menu,
then touch “Connection Status”.
The Connection Status screen appears. Either
“OK” or “NG” (or “No”) appears on the
screen, and the connection status of each
cable is shown.
6
7
5
1. Distance
Driving distance is indicated.
2. Speed Pulse
Total number of speed pulses is indicated.
3. Learning Status
Current driving mode is indicated.
4. Degree of learning
Learning situations of Distance, Right Turn,
Left Turn, and 3D detection are indicated by
the length of bars.
1
2
3
4
5
6
7
5. Speed
Speed detected by the navigation system is
1. Speed Pulse
indicated. (This indication may be different
from the actual speed of your vehicle, so
please do not use this instead of the speed-
ometer of your vehicle.)
6. Front and back G/Rotational speed
Accelerated velocity of your vehicle in front
/ back direction is indicated. Also, rota-
tional speed when your vehicle turns to left
or right is shown.
7. Inclination
Degree of slope of the street is indicated.
The Speed Pulse value detected by the navi-
gation system is shown. “0” is shown while
the vehicle is stationary.
2. GPS Antenna
Indicates the connection status of the GPS
antenna, the reception sensitivity, and from
how many satellites the signal is received.
3. Installation Position
The Installation position of the main unit is
shown.
4. Parking brake
When the parking brake is applied, “On” is
displayed. When the parking brake is
released, “Off” is displayed.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Power Voltage
The power supply (reference value) pro-
vided from the vehicle battery to the naviga-
tion system is shown. If the voltage does
not fall within the range of 11 to 15V, check
that power cable connection is correct.
6. Illumination
When the headlights or small lamps of a
vehicle are on, “On” is displayed. (If the
orange/white lead is not connected, “Off”
appears.)
7. Back Signal
When the gear lever is shifted to “R”, the
signal switches to “High” or “Low”. (Which
of these is displayed depends on the vehi-
cle.)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Customizing Your Navigation System
• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the parking
brake before setting your route.
“Mile & Yard” is displayed below “KM/Mile
Setting”, indicating that “KM/Mile Setting”
is set to “Mile & Yard”.
If you want to change another setting, select
the item you want to change and repeat the
procedure in step 3.
Modifying the Default Settings
You can tailor default settings such as navigation
functions and information display for ease of use.
The following example describes how to change
settings. In this example, the “KM/Mile Setting”
settings is set to “Mile & Yard”.
Items Users can Change
This section describes the details of the setting
for each item. Settings marked with an asterisk
(*) show that they are default or factory settings.
1 Touch “Settings” in the Main menu.
The Settings menu appears.
2 Touch “Next”.
Return Home
The screen changes. “Mile” is displayed
below “KM/Mile Setting”, indicating that
this function is currently set to “Mile”.
❒ When you touch items with a setting below
them, their setting changes. When you
touch items with no setting below them, a
setting screen appears.
➲ Registering and changing your home location
➞ Page 37
Go to
➲ Registering and changing your favorite loca-
tion ➞ Page 37
❒ Touching “Next” or “Previous” changes
the screen and displays another item.
Average Speed
When calculating expected time of arrival and
the number of hours to the destination, the aver-
age speed for the freeway or ordinary road used
is set.
3 Touch “KM/Mile Setting”.
•
Major Ordinary Road
• When the “KM/Mile Setting” is set to “Mile”
or “Mile & Yard”, it can be set in 5 mile incre-
ments from 10 miles to 120 miles (45 miles*).
• When the “KM/Mile Setting” is set to “km”, it
can be set in 5 km increments from 20 km to
150 km (70 km*).
•
Minor Ordinary Road
• When the “KM/Mile Setting” is set to “Mile”
or “Mile & Yard”, it can be set in 5 mile incre-
ments from 10 miles to 100 miles (35 miles*).
47
Download from Www.Somanuals.com. All Manuals Search And Download.
• When the “KM/Mile Setting” is set to “km”, it
can be set in 5 km increments from 20 km to
110 km (55 km*).
Map Display
Screen display-related items can be set.
•
Tracking Display
•
Freeway
The tracking display setting has the following
options.
Always :
Display tracking for all journeys.
This Trip :
Display tracking dots but erase them when the
navigation system is turned off (when turning off
the engine of your vehicle).
Off* :
• When the “KM/Mile Setting” is set to “Mile”
or “Mile & Yard”, it can be set in 5 mile incre-
ments from 30 miles to 120 miles (60 miles*).
• When the “KM/Mile Setting” is set to “km”, it
can be set in 5 km increments from 60 km to
150 km (85 km*).
Modify Current Location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
Do not display tracking dots.
•
AV Guide Mode
Setting whether or not to switch to the navigation
screen automatically when your vehicle
approaches a guidance point such as an inter-
section while displaying a screen other than navi-
Hardware Volume
The sound volume for the navigation can be set.
You can separately set the volume of the route
guidance and of the beep sound.
gation.
On* :
Demo Mode
Switching from audio operation screen to naviga-
tion screen.
Off :
This is a demonstration function for shops. After
a route is set, the simulation of the route guid-
ance to a destination is automatically displayed.
Normally, set this to “Off”.
Screen is not switched.
❒ You cannot use this function when the AVD-
Repeat :
Repeat demo drive.
Off* :
W6210 is connected.
•
Close-up of Junction
Demo Mode is set off.
This setting enables to switch to an enlarged
map around the point where your vehicle is
approaching an intersection, entrance/exit of
freeway, or a junction.
Day/Night Display
To improve the visibility of the map during the
evening, you can change the combination of the
colors of the map.
On* :
Display switches to an enlarged map.
Off :
Does not switch to an enlarged map.
Nighttime* :
You can change the combination of the colors of
a map according to whether the vehicle lights are
On or Off.
•
Arrow in AV
Set whether to display the guidance information
by arrow on the Audio Operation screen of the
Pioneer AV Head Unit or Display.
On* :
Daytime :
The map is always displayed with bright colors.
Display guidance information by arrow on the
Audio Operation screen.
Off :
Do not display guidance information by arrow on
the Audio Operation screen.
❒ You cannot use this function when the AVD-
W6210 is connected.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Voice Guidance
Background Picture Setting
This can be set when your Navigation System is
combined with the Pioneer Head Unit with a mut-
ing function. This setting controls whether the
volume of the Pioneer Head Unit is automatically
muted during voice guidance.
➲ The background picture can be changed ➞
Page 43
Language Selection
➲ The language displayed can be set ➞ Page 55
On* :
Once you change the language, installation of
the program starts.
During voice guidance, the volume of Pioneer
Head Unit is muted automatically.
Off :
Volume of Pioneer Head Unit stays the same dur-
ing voice guidance.
• Once the installation of the program
starts, do not stop the engine of your vehi-
cle and do not switch off the Navigation
System until the installation is completed
and the map of your surroundings appears.
Time
Adjusts the systems clock. The time difference
(+, –) between the time originally set in the navi-
gation system is set here.
You can also select summer time On/Off.
Mute Setting
Items related to muting of sound volume can be
set.
➲ Time settings ➞ Page 56
On :
➲ “About AV Head Units /Displays to be Con-
Summer time is taken into account.
Off* :
nected” ➞ Page 57
Summer time is not taken into account.
•
Voice Recognition
This can be set when your Navigation System is
combined with the Pioneer Head Unit with a mut-
ing function. This setting controls whether the
volume of the Pioneer Head Unit is automatically
muted during voice operation.
❒ When the period of summer time comes, or
when the summer time ends, the navigation
system does not automatically change the
summer time setting.
➲ Change the summer time setting ➞ Page 56
On* :
During voice operation, the volume of the Pioneer
Head Unit is muted automatically.
Off :
The volume of the Pioneer Head Unit stays the
same during voice operation.
KM/Mile Setting
This setting controls the unit of distance dis-
played on your Navigation System.
Mile* :
Show distances in miles.
Mile & Yard :
Show distances in miles and yards.
km :
❒ If you select “Off”, the sound from the Pioneer
Head Unit may interfere with the voice recog-
nition system.
Show distances in kilometers.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Voice Recognition
After you have started the engine, turn on voice
recognition and set whether or not to perform all
operations up to route searching by voice.
(This function is effective only when a route is not
set.)
On :
The automatic voice recognition is engaged each
time your vehicle is started.
Off* :
Voice operation starts after pressing the TALK
(or VOICE) button or touching VOICE icon.
Voice Recog.Help
This setting controls the list of available voice
commands displayed during voice operation.
On* :
The list of commands is shown.
Off :
The list of commands is not shown.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Operating Your Navigation System with Voice
❒ With the “CD-SR80” Steering Remote Control
(sold separately), you can press the BAND
button and the F button to switch on the oper-
ation mode of the Steering Remote Control.
When the operation mode is switched on, by
pressing the BAND button of the Steering
Remote Control, you can activate voice opera-
tion, which is equivalent of pressing the
TALK (or VOICE) button. (“CD-SR90” and
“CD-SR100” can be used. For the details of
their operation, see the instruction manuals
attached to them.)
Basics of Voice Operation
Your Pioneer Navigation System comes with the
latest in voice recognition technology. You can
use voice commands to operate many of its func-
tions. This chapter describes where you can use
voice commands, and also what commands the
system accepts.
Flow of voice operation
You can start voice operation any time even when
the map screen is displayed or audio is operated.
The basic steps of voice operation are as follows.
The steps are almost the same as when using the
Remote Control.
When using voice operation for the first
time
Until you are familiar with this system, it is rec-
ommended to stop the vehicle in a safe place and
refer to the commands displayed in the Voice
Help menu (a list of the words you can speak).
When your vehicle is parked with the parking
brake on, press the TALK (or VOICE) button or
touch VOICE icon to display a list of available
voice commands (Voice Help menu). Display of
the Voice Help menu can be turned on /off with
“Voice Recog.Help” in the Settings menu.
1 Press the TALK (or VOICE) button or
touch VOICE icon to activate voice
operation.
2 Speak a command into the micro-
phone.
3 When the command is recognized, it is
repeated.
Voice Help
VOICE icon
Current page
4 As necessary, repeat Steps 2 and 3.
5 The voice command is carried out.
When voice command is possible
When voice command is not accepted
➲ When you are used to voice operation fea-
tures and no longer need Voice Help, you can
turn it off ➞ Page 50
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Scrolling through the Voice Help Menu
Scroll through the remaining commands using
or . You can also display the commands by
saying the words “Next Page” (or “Previous
Page”).
Voice Commands
Common commands
Next Page, Previous Page, Back, Repeat, Next
Option
❒ If you want to listen to the message of the
Navigation System, say “Repeat”.
Commands for display change
Displaying the navigation screen: Display NAVI-
GATION
❒ If you want to return to the previous screen,
say “Back”.
Displaying the Audio screen: Display AV
To cancel voice operation
You can cancel voice operation features at any
time by pressing the NAVI (or POS) button on
the Navigation System. After you cancel voice
operation, the map is displayed.
Available voice commands
related to navigation
You can say the following commands:
❒ If the system fails to recognize the command
you speak, press the TALK (or VOICE) but-
ton or touch VOICE icon or say “Next option”
and other operable commands will be dis-
played. If you then press the TALK (or
VOICE) button or touch VOICE icon within 3
seconds, yet more commands are shown.
Repeat this until the command you want to
use is shown.
❒ Give the following verbal commands after
switching to the navigation screen.
Specifying your destination
New Destination, Address Book, Return Home,
<Registered name>, <POI category name>
❒ For the Address Book, <Registered name>,
and <POI category name>, only the com-
mands displayed in Voice Help can be used.
❒ If there are too many items to list, “1/**” is dis-
❒ When you input a telephone number by voice,
played.
only numbers in data can be recognized.
❒ Depending on the operating state of the navi-
gation system, some commands displayed in
Voice Help may be unavailable.
❒ You cannot search for telephone numbers of
registered locations.
❒ If no command is made in the next 6 seconds,
voice recognition is canceled and the Naviga-
tion System is on hold until the next opera-
tion. Press the TALK (or VOICE) button or
touch VOICE icon to reactivate voice opera-
tion.
Operating the route being guided
Reroute, XX mi/km detour, Cancel Route, Cancel
Way Point, Route Profile, Use/Avoid Freeway,
Use/Avoid Ferry, Use/Avoid Tollroad, Fastest
Route, Shortest Route
Changing map display
Operating by only voice when the Navi-
gation System is started
Turning on “Auto Voice Recognition” in the
Settings menu allows all settings to be imple-
mented by voice from after the navigation system
is turned on and until the route is set (applies
only if the route is not yet set).
Street Map Scale, City Map Scale, Region Map
Scale, Zoom IN, Zoom Out, Driver’s View, Map
View, Route View, Guide View, Overlay POI, Can-
cel Overlay POI
Available voice commands
related to audio
❒ If you press the TALK (or VOICE) button on
the remote control during voice operation,
voice operation mode is canceled.
❒ The commands you can give verbally depend
on the source being switched.
❒ Some commands may be canceled according
to the condition of audio unit being combined.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
❒ Some commands do not operate depending
An Example of Voice Operation
on the connected AV Head Unit or Display.
In this example, you want to search for the near-
est gas station. When presented with a list of
search options, you say the number to the left of
the option you want to select.
Common commands for Audio opera-
tions
CD, Multi CD, Radio, Source by NAVI, DVD
Changer, Monitor DVD, DVD, XM Radio, TV
Tuner, Video In, Auxiliary, Source On, Source Off
❒ Give the following verbal commands after
switching to the navigation screen.
For TUNER source
Preset 1-6, Band Change, Seek Up/Down
➲ Voice commands related to Navigation ➞
Page 52
For CD source
CD Track 1-20, Random Play, Repeat Play
1 Press the TALK (or VOICE) button or
touch VOICE icon.
A list of commands for voice operation
appears. After the message, the beep indi-
cates that the system is ready to accept your
voice command. You say a command after
this beep.
For Multi-CD (M-CD) source
Track 1-20, Random Play, Disc 1-12, ITS Play,
Next Disc, Previous Disc
For XM source
Preset 1-6, Band Change
2 Say “New Destination”.
A message to prompt the next operation is
given.
For TV source
Preset 1-12, Seek Up/Down, Band Change
For S-DVD (M-DVD) source
Disc 1-6, ITS Play, Random Play, Next Disc, Previ-
ous Disc
For NAVI source
Track 1-20, Repeat Play, Random Play
❒ Some commands may be canceled according
to the condition of audio unit being combined.
❒ Uttering <POI category name> using this
procedure starts a vicinity search in that
category. In this case, proceed to step 6.
3 Say “POI in Vicinity”.
You say the contents you want to operate.
Here, selection method of your destination is
specified. When you want to search the gas
station nearest to the current location, say
“POI in Vicinity”.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Say “Gas Station”.
Displays the name of a major gas station
group.
Tips for Voice Operation
For your voice commands to be correctly recog-
nized and interpreted, ensure that conditions are
suitable for recognition.
5 Say “All Categories”.
The map of the nearest gas station is shown.
The message, “Would you like to stop by?” fol-
lows.
Reduce the volume setting on your vehicle
audio system
➲ The sound volume is automatically reduced
6 After confirming the location, say “Yes”.
during voice operation ➞ Page 49
➲ If your Pioneer Head Unit has a Mute lead, the
sound volume of the Head Unit is automati-
cally reduced during voice operation ➞
Page 49
❒ Some Pioneer Head Unit models have a Mute
control function.
With the location shown on the map set as
the destination (or way point), the route calcu-
lation starts.
➲ “About AV Head Units /Displays to be Con-
nected” ➞ Page 57
❒ If you want to see maps with other options,
at Step 6 say “Next” (or “Previous”).
❒ If you say “No”, the map of that place can
be displayed.
Close the vehicle windows
Please note that wind through the vehicle win-
dow or miscellaneous noise from outside the
vehicle can interfere with voice operation.
➲ Searching the destination by map ➞
Page 26
Position the microphone carefully
For optimum pick-up, the microphone should be
fixed at a suitable distance directly in front of the
driver.
Pause before giving a command
Speaking too soon may cause the recognition to
fail.
Pronounce your commands carefully
Speak slowly, deliberately and clearly.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Installing the Program
• Once the installation of the program
starts, do not stop the engine of your vehi-
cle nor switch off the Navigation System
until the installation is completed and the
map of your surroundings or Audio screen
appears.
The program is installed to the Navigation Sys-
tem using the application disc.
This is not necessary if your dealer already
performed the installation.
When installing the program, you carry out the
following operations. When all the setup proce-
dures are completed, you can use the Navigation
System.
3 Press the NAVI/AV button to change the
navigation screen.
1 Insert the disc while the vehicle is
parked.
4 Touch “Yes/Oui”.
When you start the navigation unit for the first
time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the Naviga-
tion System. If desired, you can select another
language as shown.
2 Select the language used for the Navi-
gation System.
3 Setting the clock.
❒ To keep English, touch “No/Non”. After
this, proceed to Step 7.
❒ When you want to select another lan-
guage, touch “Yes/Oui”, and proceed to
the next step.
• You cannot go back to the previous (pre-
upgrade) version of the application after
the software upgrade is completed. Also,
the map discs that were previously used
cannot be used. Instead, use the CNDV-
40MT DVDs as your new map discs.
5 Select the language from the list.
Touch the language you want to use.
1 Park your vehicle in a safe place.
Leave the engine on, and make sure that the
parking brake is on.
Installation of the program, in the language
you chose, begins.
2 Insert the Pioneer DVD Map disc to the
disc loading slot of the Navigation Sys-
tem.
When upgrading, installation of the version
upgrade program starts immediately.
When the installation is complete, the open-
ing display appears.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
10To complete the setting, touch “Back”.
The map of your surroundings appears.
6 Press the NAVI/AV button to change the
navigation screen.
This completes the setup of your Navigation Sys-
tem. Chapter 1 explains the basic operation of
your Navigation System.
Some time is needed until navigation is ready.
7 Check the details of the cautionary mes-
sage and touch “OK”.
➲ To change the language and time later ➞
Page 49
8 To set the time difference, touch “+” or
“–”.
Combining and Using Pioneer
AV Equipment
To Ensure Safe Driving
• To avoid the risk of an accident and the
potential violation of applicable laws, the
navigation system is not for use with a
video screen that is visible to the driver.
• In some countries or states the viewing of
images on a display inside a vehicle even
by persons other than the driver may be
illegal. Where such regulations apply, they
must be obeyed.
Time difference
The time difference between the time origi-
nally set in the navigation system (Pacific
Standard Time) and the current location of
your vehicle is shown. If necessary, adjust the
time difference. Touching “+” or “–” changes
the time difference display in one-hour incre-
ments. The time difference can be set from
+3 to –3 hours.
9 If necessary, set to summer time.
Daylight Saving Time (DST) is off by default.
Touch “Summer Time” to change the time if
you are in the daylight saving period. This
turns the display below DST “On”.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
• a source unit can be connected to it directly,
and
• a built-in amplifier and display are equipped.
About AV Head Units /Displays
to be Connected
You need an AV head Unit or Display with a
touch panel feature to use this software. If a
display that dose not have a touch panel feature
is connected, the software will not function prop-
erly. This includes Pioneer displays that do not
have touch panel features. Make sure to use a
display suitable for the system. For details, con-
sult a dealer or product catalog.
Group 2 – Display Type AVD
The type of the unit that has a built-in amplifier
only for the built-in speaker(s) and cannot be a
control master because other unit cannot be con-
nected to it (e.g. AVD-W6210).
Group 3 – AV system display with Master/
Slave switch
The type of the unit that has no amplifier and can
be a control master by being switched to Master
and connected with other unit(s) (e.g. AVX-
P8DVD).
Group 1 – AV Head Unit
The type of the unit that can be a control master
with the following features (e.g. AVH-P6600DVD,
AVH-P6500DVD, and AVH-P7500DVD):
Features available to each Group
Group 3
Group 1 Group 2
Master
Slave
“Touch Panel Operation When Using NAVI
Source” ➞ Page 59
X
–
X
Map Display
X
X
–
–
X
X
• AV Guide Mode (➞ Page 48)
• Arrow in AV (➞ Page 48)
Mute Setting
X *1
X *1
X *1
X *1
X *2
X *2
• Voice Recognition (➞ Page 49)
• Voice Guidance (➞ Page 49)
“Common commands for Audio operations”
➞ Page 53
X
–
X
– *3
*1:The AV Head Unit or Display must be set to Mute or ATT while the Guidance is being performed by
the Navigation System.
*2:Available when the GUIDE ON lead of the Navigation System is connected to the Pioneer Head Unit.
*3:Recognizable commands are Source On, Source Off, Display AV, Display Navi, Navigation Audio,
Next page, Previous page, Repeat, and Back.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
(example) Arrow display on CD screen
Information of AV being played
Characteristics of the Naviga-
tion System when combined
with Pioneer AV Head Unit or
AV System Display
When the navigation system is combined with a
Pioneer AV Head Unit or AV System Display, you
can use the Navigation screen to confirm infor-
mation on the audio equipment being played or
you can use the Audio Operation screen of the
Pioneer AV Head Unit or AV System Display to
confirm route guidance information. Also, you
can use the Pioneer AV Head Unit or AV System
Display to select the built-in DVD player of the
Navigation System as a “NAVI Source”. (Naviga-
tion unit that cannot play DVD-Videos or CDs on
the built-in DVD-ROM drive cannot be selected as
a source.)
Distance to the guidance point
Current direction of travel
Next direction of travel
❒ If you want to operate the Navigation System
while the enlarged intersection map is dis-
played, press the NAVI/AV button on the dis-
play to switch to the navigation map.
When you approach an intersection with the
Audio Operation screen displayed, an enlarged
map of the intersection appears. When you have
passed through the intersection, the display
reverts to the Audio Operation screen.
❒ When pushing the NAVI/AV button with the
map disc inside the Navigation unit, the NAVI
source screen may show “DISC DATA READ-
ING” or may be blank.
➲ The Arrow display or enlarged intersection
map display can be turned on or off ➞
Page 48
➲ You can also operate audio equipment by
voice ➞ Chapter 5
➲ NAVI Source ➞ “Switching the source” of the
Pioneer AV Head Unit or AV System Display
combined with the product.
(example) Navigation screen
Map display
❒ For the connection methods ➞ see the instal-
lation manuals of AV equipment and your nav-
igation unit, or consult the shop or dealer
where you purchased the product.
When resetting AV Head Unit or AV
System Display
When pressing the reset button of AV Head Unit
Information of AV being played
or AV System Display while Navigation System
and AV Head Unit or AV System Display are com-
bined, make sure that ACC (ignition) is tuned
OFF. If the reset button is pressed while ACC
(ignition) is ON, it may not work properly.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Touch Panel Operation When
Using NAVI Source
Vehicles that Cannot Obtain
Speed Pulse Data
When the system is combined with the Pioneer
AV Head Unit or AV System Display, if you use
the built-in DVD player to play a DVD-Video or CD
when using the NAVI Source, the operation but-
tons are displayed on the screen and a few lim-
ited operations can be performed.
❒ The speed pulse data comes from the speed
sensing circuit. The location of this speed
sensing circuit depends on your vehicle
model. In some cases, it is impossible to
make a connection to it, and in such a case
we recommend that the ND-PG1 speed pulse
generator (sold separately) be used.
q
e
r
Conditions Likely to Cause
Noticeable Positioning Errors
For various reasons such as the state of the road
you are traveling on and the state of reception of
the GPS signal, the actual position of your vehicle
may differ from the position displayed on the map
screen.
w
t
(e.g. When AVH-P6500DVD is connected)
Some types of vehicle may not output a speed
signal while driving at just a few kilometers per
hour. In such a case, the current location of your
vehicle may not be displayed correctly while in a
traffic jam or in a parking lot.
q Switching the source
w During DVD playback : Forwarding/
rewinding the chapter.
During CD playback : Forwarding/rewind-
ing the track.
e For future use.
r Displaying the audio menu. For details,
refer to the Operation Manual of the Pio-
neer AV Head Unit or AV System Display.
t Canceling the operation buttons.
About the Data being Deleted
The following items are erased by pushing the
RESET button or disconnect yellow lead from
battery (or remove the battery itself).
• Item set in the SET-UP MENU of the built-in
DVD player (AVIC-9DVD, AVIC-90DVD only)
• Background picture setting
Cautions When Connecting a
Rear Display to the Front Dis-
play
The map screen navigation images output to the
rear display differ from standard NTSC format
images. Therefore, their quality will be inferior to
the images that appear on the front display.
• Tracking
Limitation of Functions for
Areas not Stored on the Disc
➲ Switching the rear display ➞ the manual for
For areas not stored on the disc (unrecorded
areas), the functions will operate as follows:
the display you are combining.
➲ Inoperable buttons for unrecorded areas ➞
Page 21
Displaying the Map
• Maps with a scale of between 0.02 mi and 0.25
mi cannot be displayed. (If the scale was set to
between 0.02 mi and 0.25 mi, it is automati-
cally switched to 0.5 mi.)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
• When driving with Guide View, Route View
or Driver’s View, upon entering an unre-
corded area the display automatically switches
to Map View. (When the vehicle re-enters an
area stored on the disc, the display returns to
the previous map mode except for Driver’s
View.)
Route Information
• If the set route goes through an unrecorded
area, no route profile for the unrecorded area
will be displayed. (If the set route traverses
both an unrecorded area and area stored on
the disc, only the route profile within the
recorded area will be displayed.)
• Route scrolling for an unrecorded area is pos-
sible only with a map scale of 0.5 mi or above.
Destination Search
• You cannot search a destination in an unre-
corded area using Address Search, POI
Search, or Telephone Search. (In case of the
POI search, only “City Center” search is possi-
ble.)
Other Function Limitations
Overlay POI
• Overlay POI is not available in an unrecorded
area.
• If you cannot search in a currently selected
zone, the system may forcibly switch to the
zone selection screen.
• A Freeway Search covers all areas, regard-
less of the disc on which the information is
recorded.
• If a Vicinity Search is performed on the bor-
der of an unrecorded area, the system will not
necessarily select the nearest facility. (The
search will take place only within the range of
areas recorded on the disc.)
Avoid Area
• An area not stored on the disc cannot be set as
an Area to Avoid.
❒ A set Area to Avoid may be deleted when the
software is updated. If this happens, the sys-
tem will automatically try to recover the
deleted information, but data can be recov-
ered only for areas stored on the disc. For
items that could not be recovered, a recovery
process will begin when you set another disc.
Guidance
• When your vehicle approaches an unrecorded
area, you will be notified three times: when the
distance to the unrecorded area is 12 mi (20
km), 6 mi (10 km) and 3 mi (5 km) respectively.
When your vehicle enters the unrecorded area,
a caution is given.
• In the unrecorded area, only guidance for
reaching the destination is provided. No other
guidance is given.
• If a route calculation is operated within an
unrecorded area, the route might not be set
from the streets you are currently driving. Also,
if you set the destination in an unrecorded
area of the disc, the system may not be able to
set the route up to the destination.
• If the vehicle deviates from the set route in an
unrecorded area, the Auto Reroute function
will not work.
• Even if “Close-up of Junction” is “ON”, the
display will not switch to an enlarged map of
the intersection.
• The arrow indicating the traveling direction will
not be displayed in the Audio screen.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have problems operating your Navigation System, refer to this section. The most common prob-
lems are listed below, along with likely causes and solutions. While this list is not comprehensive, it
should answer your most common problems. If a solution to your problem cannot be found here, con-
tact your dealer or the nearest authorized Pioneer service facility.
Problems in the Navigation screen
Symptom
Cause
Action (See)
Power doesn’t turn on.
The unit doesn’t operate.
Leads and connectors are incorrectly Confirm once more that all connec-
connected.
tions are correct.
The fuse is blown.
Rectify the reason for the fuse blow-
ing, then replace the fuse. Be very
sure to install the correct fuse with
the same rate.
You cannot position your vehicle on
the map or the positioning error is
large.
The quality of signals from the GPS
satellites is poor, causing reduced
positioning accuracy. Such a loss of antenna if necessary, or continue
signal quality may happen for the fol- driving until reception improves.
Check the GPS signal reception (➞
Page 45) and the position of the GPS
lowing reasons:
Keep the antenna clear.
•The GPS antenna is in an unsuita-
ble location.
•Obstacles are blocking signals from
the satellites.
•The position of satellites relative to
your vehicle is bad.
•Signals from the GPS satellites
have been modified to reduce accu-
racy. (GPS satellites are operated by
the US Department of Defense, and
the US government reserves the right
to distort positioning data for military
reasons. This may lead to greater
positioning errors.)
•If a vehicle phone or cellular phone
is used near the GPS antenna, GPS
reception may be lost temporarily.
•Do not cover the GPS antenna with
spray paint or vehicle wax, because
this may block the reception of GPS
signals. Snow buildup can also
degrade the signals.
Signals from the vehicle’s speed
pulse are not being picked up prop-
erly.
Check that the cables are properly
connected. If necessary, consult the
dealer that installed the system.
The navigation unit may not be
mounted securely in your vehicle.
Check that the navigation unit is
securely mounted and, if necessary,
consult the dealer that installed the
system.
Your vehicle is operating in Simple
hybrid mode.
Connect the speed signal input (pink
lead wire) of the power cable cor-
rectly, and reset the 3D Hybrid Sen-
sor (“Learning Status”).
The navigation unit is installed with
Confirm the installation angle. (The
an extreme angle exceeding the limi- navigation system must be installed
tation of the installation angle.
within +30 degrees to –15 degrees of
the horizontal, or within five degrees
of your vehicle’s direction of travel.)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Action (See)
Setting of the Installation direction
lever is wrong.
Check the installation position of the
navigation unit of your Navigation
System and the setting of the Instal-
lation direction lever (➞ “Installation
Manual”).
Indication of the position of your
Check whether or not the reverse
vehicle is misaligned after a U-turn or gear signal input lead (purple) is con-
reversing.
nected properly. (The Navigation Sys-
tem works properly without the lead
connected, but positioning accuracy
will be adversely affected.)
The map continually reorients itself. The traveling direction is always set
to north.
Touch
the map display.
on the screen and change
Tracking marks are not displayed.
The “Tracking Display” is turned
off.
Check the “Tracking Display” set-
tings (➞ Page 48) and make sure
“Always” or “This Trip” is selected.
The daylight display is used even
when the vehicle lights are on.
Daytime is selected on “Day/Night
Display”.
Check the “Day/Night Display” set-
ting (➞ Page 48) and make sure
“Nighttime” is selected.
The Orange/white lead is not con-
nected.
Check the connection.
The system will not switch on or will Installation or connection has been
Check with your dealer.
not operate.
carried out incorrectly.
The display is very dim.
The vehicle’s light is turned ON, and Read about the “Day/Night Dis-
“Nighttime” is selected on “Day/
play” setting (➞ Page 48) and, if
Night Display”.
desired, select “Daytime”.
The vehicle cabin temperature is
extremely low.
A Liquid Crystal Display (LCD) is
used, and such displays tend to
darken when cold. Wait for the vehi-
cle to warm up.
There is no voice guidance or the vol- The volume setting is low or the
Check the volume setting on the dis-
play or turn the volume up according
to “Hardware Volume” (➞ Page 48)
and/or turn up the volume on the dis-
play.
ume is low.
speaker lead is disconnected.
The Remote Control fails to work.
The batteries are low.
Change the batteries.
The batteries have been inserted
incorrectly.
Check that the batteries are properly
inserted according to the + and –
markings.
The Remote Control is pointing at the Ensure that the Remote Control has
floor or a seat.
a clear line of sight to the display
unit.
The signal receptor on the display is Move the Remote Control closer to
exposed to direct sunlight. the receiver on the display unit.
When the screen is frozen...
Park your vehicle at a safe place, and cut the engine off. Turn the ignition key back to “Acc off”. Then
start the engine again, and turn the power to the main unit back on. If this does not solve the prob-
lem, press the Reset button on the main unit.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages and how to react to them
The following messages may be displayed by your Navigation System.
❒ There are occasions when you may see error messages other than those shown here. In such a
case, follow the instructions given on the display.
Message
When
What to do
You cannot use this function while
driving.
While trying to make a menu selec-
tion.
Pull over and come safely to a halt,
put the parking brake on, and then
try again.
This is not the appropriate disc.
Please insert the appropriate disc.
If you try to use a disc which is
incompatible with this system
(including the old version map disc).
Insert a suitable disc.
If you insert a disc upside down.
If the disc is dirty.
Insert the disc with the label upward.
Clean the disc.
If the disc is cracked or otherwise
damaged.
Insert a normal, round disc.
Irregular speed pulse signal is
detected. Please power off the sys-
tem and check the installation. After
you have checked, please re-boot the
system and press “OK”.
If the Navigation unit does not
receive the vehicle speed pulse.
Consult your Pioneer dealer.
Speed pulse wire is not connected.
System will start to learn without
speed pulse. Please keep in mind
that accuracy is not fully ensured
without speed pulse.
The speed signal input (pink lead
wire) of the power cable is not con-
nected.
To operate with 3D hybrid mode, con-
nect the speed signal input (pink
lead wire) of the power cable cor-
rectly. Although it can be operated
with Simple hybrid mode without
connecting the speed signal input,
the precision of the positioning will
be less accurate.
Vibration is detected. Please power
off the system and check the installa- Navigation System is installed in a
While the vehicle is stationary, the
Re-install the navigation unit of the
Navigation System in a place where
tion. After you have checked, please place where the navigation unit may the navigation unit will not be
re-boot the system and press “OK”.
be affected by a large vibration.
affected by vibration.
Sensor NG (Vibration)
Direction of G sensor is not correct.
Please power off the system and
check the installation. After you have
checked, please re-boot the system
and press “OK”.
Direction of G sensor is set incor-
rectly.
See the “Installation Manual” and set
the direction of G sensor correctly.
Sensor NG (BAD) angle
The navigation unit is installed with
an extreme angle exceeding the limi- navigation system must be installed
Confirm the installation angle. (The
tation of the installation angle.
within +30 degrees to –15 degrees of
the horizontal, or within five degrees
of your vehicle’s direction of travel.)
Gyro Sensor is not working properly. Abnormal output of Gyrosensor is
Please consult your dealer or Pioneer detected.
service center.
Note down the error code shown on
the screen; turn off the power, and
then contact your nearest Pioneer
service facility.
The route could not avoid the speci-
fied area.
If route setting cannot avoid speci-
fied Areas to Avoid.
Choose whether or not to try setting
a route through the area.
Your route could not be found.
Route calculation has failed because •Change the destination.
of malfunction of map data, software, •Clean the disc.
hardware, or disc.
•Consult the Pioneer Local dealer if
this message persists.
Route calculation was not possible.
Route calculation has failed because •Change the destination.
of malfunction of map data, software, •Clean the disc.
hardware, or disc.
•Consult the Pioneer Local dealer if
this message persists.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Message
When
What to do
Route calculation was not possible
because the destination is too far.
The destination is too far.
• Set a destination closer to the start-
ing point.
• Set one or more way points.
Route calculation was not possible
because the destination is too near. close.
Route calculation was not possible
due to traffic regulations.
The destination or way point(s) is too Set a destination [and way point(s)]
farther from the starting point.
•The destination or way point(s) are •Set a destination and way point(s)
in a Control Traffic Zone (CTR) and
the route calculation is hampered.
outside the CTR if you know where
the restricted area is.
•Your vehicle is currently in a Control •Try the destination or way point(s)
Traffic Zone (CTR) and the route cal- away from the currently set points to
culation is hampered.
some extent.
•Drive your vehicle to an unre-
stricted area and reset the destina-
tion and way point(s).
Route calculation was not possible
because no guidance can be pro-
vided around the destination or the
starting point.
The destination, way point(s), or
starting point are in an area where
no road exists (e.g. a mountain) and •Reset the destination after you drive
the route calculation is impossible. the vehicle to any road.
•Set a destination and way point(s)
on roads.
There is no route to the destination.
The destination or way point(s) are in Change the destination.
an isolated island, etc. without a ferry
and the route calculation is impossi-
ble.
The maximum number of registra-
tions has been completed. Please
clear existing registered items and
re-register current item.
If there are already 300 items when
you attempt to register an item in the priate.
Address Book.
Delete some destinations as appro-
Memory is full.
When the total 300 resistered points Delete unnecessary data and try to
are in the PC card and Address
Book, you attempt moving an item to
the Address Book from PC card.
register again.
Irregular character strings. Please
input again.
A symbol that cannot be pronounced Enter a word that can be pro-
was entered.
nounced.
An error has occurred. Please note
the following error code and switch
power off.
In the case of a system failure.
Note down the error code shown on
the screen; turn off the power, and
then contact your nearest Pioneer
service facility.
DVD Player is overheating. Discon-
tinue until temperature drops.
The built-in DVD drive has over-
heated.
Cut the power off, and wait for a
while before turning the power on
again.
DISC DATA READING
With the map disc inside the Naviga- Select any other source besides
tion unit, the NAVI source screen has “NAVI SOURCE”, or press the NAVI/
been displayed by pressing the
NAVI/AV button.
AV button to switch to the Naviga-
tion map.
If a message about the PC card is dis-
played
• If there is no more space on the PC card or 300
items of data are already stored in one group,
either delete unnecessary data or create a new
group.
• If the data read from the PC card combined
with the data registered in the Address Book
exceeds 300 items, either delete unnecessary
data or reduce the amount of data read from
the PC card.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Route Setting Information
Route search specifications
Your Navigation System sets a route to your desti-
nation by applying certain built-in rules to the
map data. This section provides some useful
information about how a route is set.
About the route condition
When the calculation of only one route is set, you
can search a route option by combining the fol-
lowing conditions.
➲ How to set the calculation conditions ➞
Page 31
For example, when “Fastest” and “Avoid Free-
way” (“On”) are combined, the route, which
avoids freeway, and has the shortest travel time,
will be calculated and displayed on the screen.
Condition 1 :whether to put priority on the
distance, or time
• When a route is calculated, the route and
voice guidance for the route is automati-
cally set. Also, for day or time traffic regu-
lations, only information about traffic
regulations at the time when the route was
calculated is shown. One-way streets and
street closures may not be taken into con-
sideration. For example, if a street is open
during the morning only, but you arrive
later, it would be against the traffic regula-
tions so you cannot drive along the set
route. When driving, please follow the
actual traffic signs. Also, the system may
not know some traffic regulations.
Shortest :
Calculate a route with the shortest distance to
your destination as a priority.
Fastest :
Calculate a route with the shortest travel time to
your destination as a priority.
Condition 2 :whether to use freeway or not
Avoid Freeway :
Calculate a route that avoids freeway. (A route
using the freeway may be set if your destination
is far away.)
• Update Navigation DVDs are available for
purchase from your local Pioneer dealer
that includes the most current map and
point of interest information. Contact your
local Pioneer dealer for details.
• The system assumes the driver deviated either
intentionally or inadvertently from the route
and searches for another route (intelligent
rerouting). Depending on the situation, the
system may search a new route that does not
return to the original one.
• The calculated route is one example of the
route to your destination decided by the Navi-
gation System whilst taking the type of streets
or traffic regulations into account. It is not nec-
essarily an optimum route. (In some cases, you
may not be able to set the streets you want to
pass. If you want to pass a certain street, set
the way point on that street.)
• The route set by your Navigation System is
based on the assumption that the driver does
not know the area. Thus, the streets known to
local drivers, such as small streets or special
roads, may not be used for the set route.
• Some route options may become the same
route. If visiting points are set, or the route is
65
Download from Www.Somanuals.com. All Manuals Search And Download.
set by voice operation, only one route is calcu-
lated.
- when driving on a road inside a facility
- when driving on a roundabout
• Route setting is limited to the range of the disc
in use.
Route highlighting
• Once set, the route is highlighted in bright
green on the map.
• The immediate vicinity of your starting point
and destination may not be highlighted, and
neither will areas with particularly complex
road layouts. Consequently, the route may
appear to be cut off on the display, but voice
guidance will continue.
• The destination is too far, there may be
instances where the route cannot be set. (If
you want to set a long-distance route going
across several areas, set way points along the
way.)
• During voice guidance, turns and junctions
from the freeway are announced. However, if
you pass junctions, turns, and other guide
points in rapid succession, some may not be
announced.
• It is possible that guidance may direct you off a
freeway and then back on again.
Intersection enlargement
• When “Close-up of Junction” is on, the map
scale increases to show more detail as you
approach an intersection.
• If the intersection is approached in a gentle
curve, the map displayed may differ from the
actual road layout.
• In some cases, the set route may require you to
travel in the opposite direction to your current
heading. In such cases, you are instructed to
turn around, so please turn around safely by
following the actual traffic rules.
• In some cases, guidance may direct you past
your destination and then indicate a U-turn to
get back to it.
Tracking
• In some cases, a route may begin on the oppo-
site side of a railway or river from your actual
current location. If this happens, drive towards
your destination for a while, and try route cal-
culation again.
• Your Navigation System marks your course on
the map in certain increments. This is called
tracking. It is handy when you want to check a
route traveled without guidance or if returning
along a complex route.
• In the following cases, the route that passes
through an Area to Avoid may be set:
- when your vehicle is in the Area to Avoid
- when your destination or way points are in
the Area to Avoid
- when it is not possible to avoid doing so
• If a suitable route cannot be set in compliance
with the specified “Detour” distance, or your
preference to avoid freeways, toll roads, ferry
route, the setting or parameter may be
ignored.
• A maximum of about 145 miles (230 km) is
marked and, as you travel beyond this limit,
tracking marks are erased in order from the
most distant. Tracking display shows about
100 miles tracking of your vehicle with white
dots.
➲ Tracking can also be set for automatic erasing
whenever the Navigation System is switched
off ➞ Page 48
• When there is a traffic jam ahead, if driving
through the traffic jam is better than taking the
detour, a detour route may not be set.
• There may be instances when the starting
point and the destination point are not on the
highlighted route.
• The number of roundabout exits displayed on
the screen may differ from the actual number
of roads.
• Auto Reroute function does not work in the fol-
lowing cases:
- when your vehicle is not on a street
- when your vehicle is on a ferry
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of the Road Stored in the
Disc
Copyright
©1984-2004 Tele Atlas North America, Inc. All Rights
Reserved.
There are three types of roads in the map of this
disc.
Data by Info USA ©2004 All Rights Reserved.
Turn by Turn Routable Roads contain full
attribute data and can be used for full Route
Guidance. Pioneer Navigation will display full
route guidance, including turn-by-turn voice
directions and arrow icons.
Canadian Data ©2004 DMTI Spatial and ©2004 Tele
Atlas North America, Inc. Portions of Canadian map data
are reproduced under license from Her Majesty the
Queen in Right of Canada with permission from Natural
Resource Canada.
Routable Roads (The Route displayed and
highlighted in Purple Color) have only basic
data and can only be used to plot a navigable
route. Pioneer Navigation will only display a navi-
gable route on the map (only the arrival guidance
for the destination or a way point is available).
Please review and obey all local traffic rules
along the highlighted route. (For your safety.)
No turn-by-turn directions or arrow icons will be
displayed on these roads.
©INCREMENT P CORP.2004
When your vehicle reaches to the entrance of this
road, the icon
that the guidance is not available with this type of
road. The icon will be indicated for the road
will be displayed, indicating
with which the guidance is available.
The Close-up of intersection function, Auto
Reroute function, Changing the view to Guide
View, or Route View are not available.
Non Routable Roads (Pink Color Road)
Map display is possible, but it cannot be used for
the route calculation. Please review and obey all
local traffic rules along this route. (For your
safety.)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation map disc
Glossary
This DVD-ROM disc contains Pioneer navigation soft-
ware. Map data is also recorded on the disc.
This glossary explains some of the terms used in
the manual.
PC card
Card-type peripheral equipment mainly used for per-
sonal computers. The Navigation System can use a mem-
ory card to store data.
3D Hybrid sensor
The built-in sensor which enables the system to estimate
your vehicle’s position. A learning function increases its
accuracy and two sets of learning data can be stored in
memory.
Point of Interest (POI)
Point Of Interest; any of a range of locations stored in the
data, such as railway stations, shops, restaurants, and
amusement parks.
Address Book
A list of previously searched destinations, way points and
locations registered manually.
Region number
DVD players and DVD discs feature region numbers
indicating the area in which they were purchased. Play-
back of a DVD is not possible unless it features the same
region number as the DVD player.
Current location
The present location of your vehicle; your current location
is shown on the map by a red triangle mark.
Default setting
Remote Control
A factory setting which applies when you first switch on
the system; you can change default settings to suit your
own needs in the Route Options menu or the Settings
menu.
The remote control unit for the system (➞ Chapter 1 of the
“Hardware Manual”).
Route setting
The process of determining the ideal route to a specific
location;routesettingisdoneautomaticallybythesystem
when you specify a destination.
Destination
A location you choose as the end point of your journey.
Favorite location
Set route
A frequently visited location (such as your workplace or a
relative’s home) that you can register to allow easy rout-
ing.
The route marked out by the system to your destination. It
is highlighted in bright green on the map.
Tracking
GPS
Marks on the map indicating the route you have traveled.
Global Positioning System. A network of satellites that
provides navigation signals for a variety of purposes.
Voice guidance
The giving of directions by a recorded voice while in
guidance mode.
Guidance mode
The mode in which guidance is given as you drive to
yourdestination;thesystemautomaticallyswitchestothis
mode as soon as a route has been set.
Voice recognition
The technology that allows the system to understand the
driver’s voice commands.
Guidance point
These are important landmarks along your route, gener-
ally intersections. The next way point along your route is
indicated on the map by the yellow flag icon.
Way Point
A location that you choose to visit before your destination;
a journey can be built up from multiple way points and
the destination.
Home location
Your registered home location.
Menu
A list of options shown on the display; choices are
selected touching the display.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Information
Main menu
Destination
Route Options
Auto Reroute
Address Search
Return Home
Go to
P. 18
P. 31
P. 31
P. 32
P. 32
P. 32
P. 32
P. 41
P. 30, 37
P. 30, 37
P. 27
Avoid Freeway
Avoid Ferry
Route Condition
POI Search
P. 28
Vicinity Search
Address Book
Number of Routes
Avoid Toll Road
P. 31, 38
P. 31, 38
Destination History
Designate Areas to Avoid
Freeway Search
Telephone Search
Cancel Route
P. 29
P. 30
P. 35
Information
P. 34
P. 29
P. 45
P. 33
P. 42
P. 45
Route Profile
Overlay POI
Connection Status
Route Scroll
PC Card
3D Calibration
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
P. 37
P. 37
P. 47
P. 49
P. 48
P. 48
P. 48
Return Home
Go to
Average Speed
Modify Current Location
Hardware Volume
Demo Mode
Day/Night Display
Map Display
P. 48
P. 48
P. 48
P. 48
Tracking Display
AV Guide Mode
Close-up of Junction
Arrow in AV
P. 43
Background Picture Setting
Language Selection
Mute Setting
P. 49, 55
Time
P. 49, 56
P. 49
KM/Mile Setting
Auto Voice Recognition
Voice Recog.Help
P. 50
P. 49
P. 49
Voice Recognition
Voice Guidance
P. 50
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Shortcut menu
Shortcut menu
:Destination
:Chg.Route
P. 26
Reroute
P. 34
P. 36
P. 34
P. 33
P. 36
P. 34
Cancel Route
:Registration
:Vicinity Search
:Overlay POI
P. 38
P. 28
P. 29
Route Profile
Route Scroll
Skip Way Point
1 mi (km) – 50 mi (km) detour
71
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P. O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: 1-877-283-5901
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL:55-9178-4270
Published by Pioneer Corporation.
Copyright © 2004 by Pioneer Corporation.
All rights reserved.
Printed in Japan
<KKYHF> <04E00001>
<CRB1975-B> UC
Download from Www.Somanuals.com. All Manuals Search And Download.
|
