FILE-TYPE COMPACT DISC PLAYER
◊Û¿X/?≥
'
D
FILE–TYPE
COMPACT DISC PLAYER
DISC
TRACK
MIN
SEC
◊Û¿X/?≥
Î
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
ALL
RANDOM REPEAT
PREVIOUS DISC SCAN
1
REMAIN PGM
BEST
CUSTOM
I
II III SINGLE
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
ACSESS
1
4
7
2
3
6
9
T
IM
E
MODE
HI-LITE
CLEAR
PROGRAM
RANDOM
REPEAT
5
8
0
SINGLE
LOADER
PLAY
'
UNLOAD
BEST
PREVIOUS
DISC
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
FILE –TYME CD MECHANISM
IS
C
–
+
POWER
STANDBY ON
/
1
7
¡
8
4
3
¢
R
A
N
D
O
M
OPEN/
CLOSE
6
7
41
¡¢
F
R
C
IL
E
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
O
D
N
P
L
O
A
Y
E
U
R
N
C
T
R
L
IT
Î
U
0
DIRECT LINER CONVERSION
1-BIT DLC
POWER ON DEMO display
POWER ON DEMO display mode allows you
to see variations of the display. To enter the
POWER ON DEMO display mode, press
STANDBY/ON and then 4 1 within 1 sec-
ond after turning on the power.
To cancel the POWER ON DEMO display
mode, press any button.
CONTENTS
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in a
safe place for future reference.
BEFORE YOU USE THE PLAYER ....................................... 4
CAUTIONS REGARDING HANDLING ................................. 5
CONNECTIONS .................................................................. 6
NAMES OF PARTS ............................................................. 7
HOW TO LOAD THE DISCS ............................................... 9
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
BASIC OPERATIONS
To listen in order from the first track............................. 10
To select the disc and track .......................................... 10
To select a play mode ................................................... 10
Playing a disc in the Single Loader slot ......................... 11
The hood can be opened or closed during playback ..... 11
IMPORTANT NOTICE
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
VARIOUS OPERATIONS
This player is for consumer use. If the player is used in a business
(for example, used for a long period at a restaurant), the player will
not be covered under warranty.
CD Video, VIDEO CD, CD graphics, DVD and CD-ROM discs can
not be played with this player.
To program and play only the discs you want to hear... 12
To start playback from a specific disc ........................... 13
To play a track you want to hear ................................... 13
To repeat playback ........................................................ 13
To playback tracks/discs at random .............................. 14
To program tracks/discs in a desired order ................... 15
To store your favorite tracks ......................................... 16
To find out which discs you’ve listened to recently ...... 16
To scan quickly through tracks on a disc ....................... 17
To use the TIME button ................................................ 18
TROUBLESHOOTING ....................................................... 19
SPECIFICATIONS .............................................................. 20
Download from Www.Somanuals.com. All Manuals Search And Download.
[FOR U.S. MODEL]
CAUTION
÷ Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
÷ The use of optical instruments with this product will increase eye hazard.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Inform ation to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
[For Canadian m odel]
This Class B digital apparatus meets all requirements of the
Canadian Interference–Causing Equipment Regulations.
[For Canadian m odel]
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPO-
SURE.
[Pour le m odèle Canadien]
Cet appareil numérique de la Classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
[Pour le m odèle Canadien]
ATTENTION: POUR PREVENIR LES CHOCS ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEU-
VENT ETRE INSEREES A FOND SANS EN LAISSER AU-
CUNE PARTIE A DECOUVERT.
CAUTION [For U.S. Model]
This product satisfies FCC regulations when shielded cables and
connectors are used to connect the unit to other equipment. To
prevent electromagnetic interference with electric appliances
such as radios and televisions, use shielded cables and connec-
tors for connections.
THE STANDBY/ON SWITCH IS SECONDARY CONNECTED AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN THE STANDBY POSITION.
3
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU USE THE PLAYER
HERE’S WHAT YOU CAN DO!
Im m ediately access and play your favorite tracks
from am ong the 100 discs loaded in the player.
[page 16]
The Best Selection Memory function lets you store and play
favorite tracks with the touch of a single button (up to 20 tracks).
Up to 100 CDs can be registered by classifying
them into 3 categories (CUSTOM). [page 12]
For example, if you register you own discs in CUSTOM I, your
mother’s discs in CUSTOM II and your father’s discs in CUSTOM
III or if you select three kinds of music genres or artists and
register them in the three CUSTOM banks, you can play all of the
discs classified under one of the three CUSTOM banks. Addition
of discs to already-registered discs is also possible. Each of the
three CUSTOM banks can register up to 100 discs.
Easy access to the disc(s) you've listened to
recently. [page 16]
The Previous Disc Scan function recalls the last disc you played
and then moves one by one through the previously played discs
(auto-memory of last 20 discs played).
Single Loader slot is provided. [page 11]
If you have a disc borrowed from a friend, you can play only that
disc by loading it in this special slot (Disc No. 0), without replacing
discs stored in the rack.
CONFIRM SUPPLIED ACCESSORIES
PUT BATTERIES INTO THE REMOTE
CONTROL UNIT
Remote control unit x 1
Output cable x 1
D
P
O
W
E
R
H
I-
L
IT
E
P
R
E
V
IO
M
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
P
G
C
L
E
A
R
1
4
7
2
5
8
0
3
6
9
T
IM
E
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
–
IS
C
+
1
7
¡
8
4
3
¢
R
A
N
D
O
M
F
R
C
IL
E
U
E
M
-
O
0
T
Y
T
0
P
E
9
E
C
0
C
O
D
N
P
L
O
A
Y
L
E
U
R
N
T
R
IT
Î
-
P
Open the lid of the battery compartment on the rear of the remote
control unit, and insert the batteries, taking care to align the ª and
· polarities correctly.
Notes!!
÷
Control cable x 1
In order to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period (one
month or more). If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries
with new ones.
Size AA/R6P dry cell
batteries x 2
÷
Do not allow books or other objects to rest on top of the re-
mote control unit, since the buttons may be depressed, causing
faster exhaustion of the batteries.
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment cor-
rectly matching the positive ª and negative · polarities,
as shown by the display inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand. Do not mix different brands of batter-
ies.
4
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS REGARDING HANDLING
Location
Condensation
Install the player in a w ell-ventilated location w here it w ill not be
exposed to high tem peratures or hum idity.
When this unit is brought into a warm room from previously cold
surroundings or when the room temperature rises sharply, con-
densation may form inside, and the unit may not be able to attain
its full performance. If this occurs, allow the unit to stand for about
an hour or raise the room temperature gradually.
Do not install the player in a location which is exposed to direct
rays of the sun, or near stoves or radiators. Excessive heat can
adversely affect the cabinet and internal components. Installation
of the player in a damp or dusty environment may also result in a
malfunction or an accident. (Avoid installation near cookers etc.,
where the player may be exposed to oily smoke, steam or heat.)
Do not install the player on a tottered stand nor in an unstable or
inclined place.
Cleaning and handling com pact discs
÷
The presence of fingerprints or smudges on the surface of the
disc will not directly affect the recorded signals, but depending
on the degree of contamination, the brightness of the light
reflected from the signal surfaces may be reduced, causing
degradation of sound quality. Always keep your discs clean by
wiping them gently with a soft cloth from the inner edge to-
ward the outer periphery.
Precautions regarding installation
÷
÷
Placing and using the compact disc player for long periods on
heat-generating sources such as amplifiers will affect perfor-
mance. Avoid placing the player on heat-generating sources.
Install this compact disc player as far as possible from tuners
and TV sets. A compact disc player installed in close proximity
to such equipment may cause noise or degradation of the pic-
ture.
÷
Such noise may be particularly noticeable when an indoor an-
tenna is used. In such cases, make use of an outdoor antenna,
or turn off power to the compact disc player.
÷
÷
If a disc becomes very dirty, dip a soft cloth in water, and after
wringing it out well, wipe the dirt away gently, and then remove
any water drops with another soft, dry cloth.
Do not use record cleaning sprays or anti-static agents on discs.
Also, never clean discs with benzene, thinner, or other volatile
solvents, since damage to the disc surface may result.
÷ Please place this unit on a level surface.
Record
cleaning
sprays
Benzene
Thinner
Cleaning the player
To clean the PLAYER, wipe with a soft, dry cloth. For stubborn
dirt, wet a soft cloth with a mild detergent solution made by dilut-
ing one part detergent to 5 or 6 parts water, wring well, then wipe
off the dirt. Also use a dry cloth to wipe the surface dry. Do not
use volatile liquids such as benzene and thinner which are harmful
to the unit.
With this unit, use a Compact Disc carrying the mark shown
below. Do not use other disc, for this may result in malfunction
or damage.
÷
÷
÷
÷
When holding discs, do not touch their signal surfaces. Hold by
the edges, or by one edge and the center hole.
Do not affix gummed labels or tape to the label surfaces. Also,
do not scratch or damage the label.
Discs rotate at high speed inside the player. Do not use dam-
aged (cracked or warped) discs.
Do not play a CD with a special shape (having other shape than
a circular disc, such as a heart shaped disc). Otherwise mal-
function may occur.
Storing discs
÷
÷
Discs are made of the same kinds of plastic used for conven-
tional analog audio records. Be careful not to allow discs to
warp; always store discs in their cases vertically, avoiding loca-
tions with high heat or humidity, or extremely low tempera-
tures. Avoid leaving discs in cars, since the seat of a car in
direct sunlight can become unbelievably hot.
Always read and abide by the precautionary notes listed on disc
labels.
'
CD lens cleaner
Re-transporting
The player's pickup lens should not become dirty in normal use, but
if for some reason it should malfunction due to soiling, consult your
nearest PIONEER authorized service center. Lens cleaners for CD
players are commercially available, but special care should be exer-
cised in their use since some may cause damage to the lens.
When re-transporting this unit in the future, remove all discs from the
rack. Turn off the STANDBY/ON switch, wait for "OFF" to go out from
the display, and unplug the power cord.
5
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Before m aking or changing the connections, sw itch off the pow er sw itch and disconnect the pow er cord from the AC outlet.
To the CONTROL IN jack of
the Pione e r com pone nt
bearing the Îmark.
CONTROL
OUT
C
Control cable
=
C
Stereo amplifier
Control cable
IN
OUT
CD player
CD
L
White
White
L
Output cable
L
R
R
R
A-1
Red
Red
DIGITAL
INPUT
A-2
B Optical fiber cable
Cassette deck
Power cord
OPTICAL
CD-DECK
SYNCHRO
D
(Be sure to use the supplied CD-DECK SYN-
CHRO control cord with the cassette deck.)
CD-DECK SYNCHRO cable
A Making connections
C
System rem ote control w ith a Pioneer stereo am plifier that
1 Connect the OUTPUT jacks of this unit to the input jacks (CD
or AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
has the Î m ark
When a Pioneer stereo amplifier bearing the Î mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier. If you do not plan to use this feature, it
is not necessary to connect the CONTROL IN/ OUT jacks.
÷
Be sure not to connect this unit to the amplifier’s PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
2 Connect the power cord to a household AC wall outlet.
Make sure plugs are inserted fully into the wall outlet.
÷
The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc Change
operations.
For instructions regarding connections and operation, refer to
the operating instructions provided with your stereo amplifier.
÷
Note!!
÷
Do not connect the power cord to an AC outlet on your amplifier.
If you connect the power cord to a "SWITCHED" AC outlet on an
amplifier, you will not be able to use this unit's memory function.
Notes!!
÷
When a control cable is connected to the player’s CONTROL
B Connecting the OPTICAL FIBER CABLE
This unit can be connected to an amplifier equipped with an optical
digital jack.
IN jack, direct control of the player with the remote control unit
is not possible. Operate the player with the remote control unit
by aiming it at the amplifier.
1. Remove the protective dust cap from this unit’s DIGITAL OUT
OPTICAL jack.
2. Use an optical fiber cable to connect the DIGITAL OUT OPTICAL
jack of this unit to the optical input jack of the amplifier.
÷
Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL OUT jacks. Do not connect
only one end of the cable.
Be sure to turn off the power of the amplifier before connecting
the power cord and output cable.
When only the digital output is connected, the remote sensor of
the amplifier does not function. To operate it, connect the output
cable to the stereo amplifier as well as connecting the digital
output.
÷
÷
•
Align the plug of the optical fiber cable with the optical digital jack
and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections.
Precautions concerning use of optical fiber cables
•
•
Fully insert the optical fiber cable plugs all the way into the jacks.
Be careful not to fold or crimp the cable. When coiling an optical
fiber cable for storage, make sure the diameter of the coil is 15 cm
(6 in.) or larger.
Use an optical fiber cable with a length of 3 m ( 10 ft.) or less.
Protect the optical fiber cable plugs from scratches and dust.
When the unit is not connected using an opticalfibercable, be sure
to keep the protective dust cap plugged into the optical digital
output jack at all times.
D CD-Deck synchro function
If you have a Pioneer cassette deck provided with the CD-Deck
synchro function, connect the CD-DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro record-
ing can be carried out between the player and deck.
•
•
•
÷
÷
÷
For details on connections and operation, refer to the operating
instructions supplied with the cassette deck.
The CD-DECK SYNCHRO cable is not supplied with the CD
player.
When CD-Deck synchro recording is carried out on several discs,
use the program playback function. (Refer to page 15 for details
of program playback.)
Note!!
In order to enable the CD-DECK SYNCHRO recording function, the
Output cable must be connected to the stereo amplifier.
6
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS
FRONT PANEL
÷The numbers in parenthesis ( ) are reference pages.
HI-LITE button CLEAR button
P. 17
P. 12 P. 15
P. 9
Hood
MODE button
P. 10 P. 12
PROGRAM button
P. 15
P. 8
Rem ote sensor
SINGLE LOADER
ACCESS button
RANDOM button
P. 14
D
FILE–TYPE
COMPACT DISC PLAYER
DISC
TRACK
MIN
SEC
◊Û¿X/?≥
Î
CUSTOM ALL
RANDOM REPEAT
1
REMAIN PGM
BEST
P
R
E
V
I
O
U
S
DISC SCAN
I
II III
SINGLE
P. 11
ACSESS
HI-LITE
CLEAR
PROGRAM
REPEAT
MODE
RANDOM
P. 13
REPEAT button
SINGLE
LOADER
PLAY
'
UNLOAD
BEST
PREVIOUS
DISC
FILE –TYME CD MECHANISM
SINGLE LOADER
PLAY button
P. 11
DISC (–/+) buttons
P. 9 P. 13
POWER
STANDBY ON
/
OPEN/
CLOSE
6
7
41
¡¢
DIRECT LINER CONVERSION
1-BIT DLC
Track/Manual search
buttons (41/¡¢)
P. 10
UNLOAD button
P. 9
POWER STANDBY/ON
switch
P. 10
P. 16
P. 10
Stop button (7)
P. 10
OPEN/CLOSE button
P. 9
PREVIOUS button
Play/Pause button (6)
P. 16
BEST button
DISPLAY
Lights during random play.
Lights during repeat play.
Lights when the PROGRAM (PGM)
Lights when you choose the play m ode.
button is pressed.
DISC
TRACK
MIN
SEC
CUSTOM ALL
RANDOM REPEAT 1 REMAIN PGM
DISC
I
II III
PREVIOUS
SCAN
BEST
SINGLE
Lights when the BEST button is pressed.
Lights during custom program m ing
and play.
Lights when the rem aining tim e is displayed.
Lights when a CD is being played.
Lights during pause m ode.
Blinks during TRACK SCAN.
Blinks during DISC SCAN.
Blinks when the PREVIOUS button is pressed.
7
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS
REMOTE CONTROL UNIT
÷The numbers in parenthesis ( ) are reference pages.
HI-LITE button
P. 17
P. 16
PREVIOUS button
POWER STANDBY/ON
P. 16
P. 15
BEST button
P. 10
switch
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
MODE button
P. 10 P. 12
PGM button
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L E
A
R
REPEAT button
P. 13
P. 12 P. 15
CLEAR button
1
4
7
2
3
6
9
T
IM
E
P. 18
TIME button
Digit buttons
P. 10
5
8
0
P. 12 P. 15
TRACK SET button
P. 10 P. 15
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
DISC SET button
P. 10
IS
C
–
+
P. 12 P. 15
P. 13
DISC (–/+) buttons
1
7
¡
8
4
3
¢
Manual search buttons
Track search buttons
R
A
N
D
O
M
P. 10
(1/¡)
P. 10
(4/¢)
F
R
C
IL E -T Y
P
E
C
0
C
O
D
N
P
T R
L A Y
E
U
R
N
E
M
-P
O
0
T E
0
O
L
IT
Î
U
9
STOP button (7)
P. 10
P. 14
RANDOM button
Pause button (8)
P. 10
P. 10
PLAY button (3)
REMOTE CONTROL OPERATIONS
When operating the remote control unit, point the unit's infrared
signal transmitter at the remote control receiver (Remote Sensor) on
the front panel of the player. The remote control unit can be used
within a range ofabout 7 meters (23 feet)from the remote sensor, and
within angles of up to about 30 degrees.
D
30º
Note!!
30º
If the remote control sensor window is in a position where it receives
strong light such as sunlight or fluorescent light, control may not be
possible.
8
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO LOAD THE DISCS (Be sure to read this before operation)
Notes!!
Loading discs into the rack
÷
÷
Do not attem pt to open the hood w ith your hand.
Be careful not to pinch your fingers when opening and closing the
hood.
÷
÷
You can load up to 100 discs in the rack.
The numbers marked on the rack are used as the disc numbers.
These are marked in the clockwise order from 1 to 100.
÷
If a disc is inserted with its label side facing to the right, it cannot
be played back. Be sure to load alldiscs with theirlabelsides facing
to the left.
The follow ing procedure describes how to load discs from
disc No. 1.
WARNING:
1
POWER
STANDBY / ON
Press POWER STANDBY/
ON switch.
Do not put your hand or any other object inside
the rack, otherw ise injury or part dam age m ay
result.
÷
Ensure that the disc No.
shown on the displayis “1”.
If the displayed disc No. is
not “1”, press DISC(–/ +)
to display “1”.
÷
D
2
UNLOAD
Press UNLOAD.
«
D
IS
C
T
R
A
C
K
M
IN
S
E
C
A
L L
÷
÷
÷
÷
Do not put anything other than CDs inside the rack.
Do not use adapters for 8-cm (3-in.) CDs.
Load only one disc into each disc slot.
Inserting an 8-cm (3-in.) CDs in between two 12-cm (5-in.) CDs,
will make it difficult to remove the 8-cm (3-in.) CD.
We recommend inserting 12-cm (5-in.) CDs starting from Disc No.
1 (i.e., 1, 2, 3...) and 8-cm (3-in.) CDs starting from Disc No. 100
(i.e., 100, 99, 98...).
D
The hood w ill open.
When UNLOAD is pressed,
the hood opens to the disc
corresponding to the disc No.
displayed on the front of the
unit. Therefore, if you want to
load discs from No. 50, use
DISC (–/ +) on the unit to dis-
play “50”, or enter “50” using
the remote controlunit, before
pressing UNLOAD.
÷
÷
The unit will not operate if the hood is opened during playback. Be
sure to close the hood before attempting any operations.
To load or remove a disc in or from the slot which is seen through
the hood, press OPEN/ CLOSE. The hood is opened, “HOLD” is
displayed and the disc can be loaded in or ejected from the slot
seen through the hood. Even while “HOLD” is being displayed,
the rack can be rotated by pressing DISC (–/ +).
Be sure to remove all discs from the rack, set the POWER
STANDBY/ ON switch to off, and unplug the power cord before
moving the unit.
3
4
Load the disc into the
rack w ith the labelside
(printed surface)facing
to the left.
D
÷
Side to be played faces right
(label side faces left)
To rem ove the discs...
DISC
Press DISC(+)to rotate
the rack.
1
Press UNLOAD.
2
Select the disc No. to be rem oved by pressing DISC(–/ +).
÷
The rack rotates in the di-
rection of 1,2,3.... Press-
ing DISC(–) rotates the
rack in the opposite direc-
tion.
÷
The rack rotates until the selected disc comes in the front of
the unit.
3
4
Rem ove from the rack.
Press OPEN/ CLOSE.
÷
The hood will close.
5
6
Load other discs into the rack by repeating
steps 3 and 4 for each of them .
Press OPEN/ CLOSE.
OPEN/
CLOSE
÷
The hood will close.
Tip:
Difference between OPEN/ CLOSE and UNLOAD
OPEN/ CLOSE: The hood is simply opened or closed.
UNLOAD:The slot corresponding to the disc No. being displayed
rotates to the center position then the hood is opened.
9
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
•
You can also use the remote control.
2
D
MODE
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
1
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
1
4
7
2
3
6
9
T
IM
E
MODE
Digit buttons
DISC SET
5
8
0
D
◊Û¿X/?≥
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
Î
TRACK SET
IS
C
–
+
'
1
7
¡
8
4
3
¢
7
FILE –TYME CD MECHANISM
1/ ¡
4/ ¢
R
A
N
D
O
M
41/¡¢
7
8
OPEN/
CLOSE
1
6
7
41
¡¢
F
R
C
IL
E
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
O
D
N
P
L
O
A
Y
E
U
R
N
C
T
R
L
IT
Î
U
0
3
3
DIRECT LINER CONVERSION
1-BIT DLC
3
6
To select the disc and track
To listen in order from the first track
D IS C
S E T
Use the digit buttons to se-
lect the disc, then press DISC
SET.
POWER
STANDBY / ON
2
Press POWERSTANDBY/ON.
1
\
To turn the pow er off...
Press POWER STANDBY/ ON again.
T R A C K
S E T
Use the digit buttons to se-
lect the track, and press
TRACK SET.
7
2
Load discs into the rack.
\
«
D
Press OPEN/ CLOSE.
To select a play m ode
Side to be played faces right
(label side faces left)
MODE
Press MODE during play or
stop m ode.
Press a few times to choose the mode
you desire.
Playback occurs according to the cho-
sen mode.
Note!!
÷
Inserting more than one disc into the slot will damage the discs
and cause the unit to malfunction.
ALL:
All discs are played back.
3
SINGLE: One disc is played back.
CUSTOM: Only discs stored in the CUSTOM file are played back
(I,II,III)
Press 6 (or 3).
The tracks are played in order starting
from the first trackon the disc with the
lowest disc No.
6
(see page 12 to create a custom file).
3
3
ALL
SINGLE
In stop m ode:
÷
If you choose a play mode beforehand, the tracks/discs are played
back according to the respective play mode.
2
2
2
CUSTOM(III
II
I)
3
ALL
3 SINGLE
During playback:
To stop play
Press 7.
7
÷
÷
When you select SINGLE during playback, only the current disc
will be played.
If you press MODE during program mode, the program contents
will be erased.
To pause play
Press 6 (or 8).
Notes!!
6
To start playback again, press 6.
÷
When you turn the power ON, playback starts according to the last
selected play mode.
To skip to another track
÷
÷
If you did not select a play mode, playback starts in ALL.
SINGLE is selected automatically when playing the disc loaded in
the Single Loader slot.
Tap 41/¡¢ (or 4/¢ on
41 ¡¢
the remote control unit).
<Last disc m em ory>
When you press 7 or turn the power OFF (STANDBY), the unit
memorizes the disc that was being played. The next time you press
6, playback will start from that same disc. (This feature is available
except in the PROGRAM play, BEST play, PREVIOUS scan, HI-LITE
scan and RANDOM play modes.)
To fast forw ard/ reverse.
Hold-down 41/¡¢ (or 1/
¡ on the remote control unit).
41 ¡¢
10
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
2
OPEN/ CLOSE
D
1
3
◊Û¿X/?≥
Î
'
FILE –TYME CD MECHANISM
OPEN/
CLOSE
6
7
41
¡¢
DIRECT LINER CONVERSION
1-BIT DLC
Playing a disc in the Single Loader slot
The hood can be opened or closed
during playback.
1
Press SINGLE LOADER AC-
CESS.
ACSESS
÷
The hood will open with the single
loader slot located in the front of
the unit.
Press and hold OPEN/ CLOSE
until “OPEN” is displayed.
OPEN/
CLOSE
÷
÷
÷
“HOLD” is displayed after the hood is opened.
In this case, the rack does not rotate.
When the playback of the current disc has completed, the unit
enters stop mode. The next disc is played after the hood has been
closed.
2
Loading the disc into the Sin-
gle Loader slot w ith the la-
belside (printed surface)fac-
ing to the left.
D
To close the hood, press
OPEN/ CLOSE again.
OPEN/
CLOSE
Side to be played faces right
(label side faces left)
Note!!
3
PLAY
Pre s s S INGLE LOADER
PLAY.
If the hood is opened during play, UNLOAD, SINGLE LOADER
ACCESS and DISC (–/ +) are defeated.
÷
The play mode is set to SINGLE.
Tips:
÷
The disc loaded in the Single Loaderslot can also be selected using
DISC(–/ +). It is located after disc No. 100 when DISC(+) is used
or disc No. 1 when DISC(–) is used. On the display, it is shown as
“P0”.
÷
÷
If a disc has been loaded in the Single Loader slot, pressing
SINGLE LOADER PLAY allows to play it anytime, even during
playback of a disc stored in the rack.
To play the disc in the Single Loader slot using the remote control
unit, press “0” and DISC SET.
11
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
÷
The parenthesis ( ) show operations for the m ain unit.
÷
The remote control is the most convenient way to perform these
operations.
MODE CLEAR
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
D
MODE
CLEAR
1
4
7
2
3
6
9
T
IM
E
◊Û¿X/?≥
Î
5
8
0
Digit buttons
'
DISC (–/ +)
FILE –TYME CD MECHANISM
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
DISC SET
IS
C
–
+
OPEN/
CLOSE
6
7
41
¡¢
DISC (–/ +)
1
7
¡
8
4
3
¢
DIRECT LINER CONVERSION
1-BIT DLC
R
A
N
D
O
M
6
3
F
R
C
IL
E
U
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
0
C
O
D
N
P
L
A
O
Y
L
E
U
R
N
T
R
IT
Î
To program and play only the discs
you w ant to hear (CUSTOM play)
To start playback
This unit lets you program up to 100 of your favorite discs. For
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Operation exam ple: Storing discs 3 and 12 in the CUSTOM II
file.
M O D E
3
Press MODEto select CUS-
TOM and press 3.
\
Playback s tarts from the lowest
disc No.
MODE
6
(
=
)
1
During stop m ode, press
MODEso that the CUSTOM
II indicator lights.
M O D E
Checking the num bers of the stored discs.
Press TIME repeatedly (3 times) during stop mode so that
the display changes as shown below.
Press DISC(–/ +). Each time you press DISC(–/ +), a disc
number stored in the CUSTOM file is displayed. When all
the disc numbers have been displayed, the disc number
changes to a blank.
D
IS
C
T R
A
C
K
M
IN
S
E
C
MODE
C
U
S
T O
II
M
(
)
D
IS
C
T R
A
C
K
M
IN
S
E
C
÷
÷
If some disc number appears, press CLEAR.
C
U
S
T O
II
M
3
2
Use the digit buttons to
select disc.
Erasing all the discs from the each CUSTOM
D
IS
C
T R
A
C
K
M
IN
S
E
C
file.
Press MODE to choose CUSTOM, then press the CLEAR
DISC
button.
C
U
S
T O
II
M
(
)
Note!!
If you use DISC (–/ +) to select a disc, it will be programmed
automatically after approximately 2 seconds.
You cannot change the discs stored in the CUSTOM file. Likewise,
you cannot erase just one disc from the CUSTOM file.
÷
÷
Pressing DISC (–/ +) during CUSTOM playback lets you choose
among other discs stored in the CUSTOM file.
If you use the digit buttons and DISC SET on the remote control
during CUSTOM playback to choose a disc not stored in the
3
Press DISC SET.
D IS C
S E T
D
IS
C
T R
A
C
K
M
IN
S
E
C
CUSTOM file, “
no dISC” will be displayed for approximately
C
U
S
T O
II
M
3 seconds.
÷
When a disc appointed to the CUSTOM file is not loaded in the
rack, “ no dISC” is displayed for approximately 3 seconds, the
4
1
2
Repeat steps 2 and 3 to
store other discs.
disc is erased from memory, and CUSTOM searches for the next
disc.
The discs stored in the CUSTOM file will not be erased when you
turn off the power.
Items stored in memory are saved for approximately 2 days, even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount ofmemoryused.
(Mem ory Back-Up Function).
\
÷
÷
D
IS
C
T R
A
C
K
M
IN
S
E
C
D IS C
S E T
C
U
S
T O
II
M
÷
While the hood is open, DISC (–/ +) cannot be used for CUSTOM
file entry.
DISC
(
)
12
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
•
You can also use the remote control.
REPEAT
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
REPEAT
D
1
4
7
2
3
6
9
T
IM
E
◊Û¿X/?≥
5
8
0
Î
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
'
DISC (–/ +)
FILE –TYME CD MECHANISM
IS
C
–
+
DISC (–/ +)
4 ¢
3
OPEN/
CLOSE
6
7
41
¡¢
1
7
¡
8
4
3
¢
R
A
N
D
O
M
DIRECT LINER CONVERSION
41 / ¡¢
1-BIT DLC
7
F
R
C
IL
E
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
O
D
N
P
L
O
A
Y
E
U
R
N
C
T
R
L
IT
Î
U
0
7
6
To start playback from a specific disc
To repeat playback (REPEAT play)
Press the REPEAT button
during playback. Each tim e
you press the button, the
repeat m ode changes as
follow s.
REPEAT
Press DISC(–/ +)during play
DISC
or pause to choose a disc
n u m b e r. Du rin g p a u s e ,
press 6 (3 or 8 on the
rem ote control unit) after
choosing the disc.
3
One track repeat
ALL repeat
3
(ALL/SINGLE/CUSTOM)
÷
Playbackstarts from the first track
of the chosen disc.
OFF
2
One track
(One track repeat)
D
IS
C
T
R
A
C
K
M
A
IN
S
E
C
To play a track you w ant to hear
Repeats the current or a selected
track in during other play operations
than HI-LITE scan and PREVIOUS
scan.
A
L L
R
E
P
E
T
1
Press 41/ ¡¢ dur-
ing play o r p a u s e t o
choose the track num ber
41 ¡¢
(ALL repeat)
ALL
you desire (or press 4/
¢on the rem ote control).
During pause, press 6afterchoos-
ing the track.
Repeats in one of the following 3
D
IS
C
T
R
A
C
K
M
A
IN
S E C
ways according to the play mode .
A
L L
R
E
P
E
T
ALL:
Repeats all the tracks
on all the discs (1 - 100).
SINGLE
D
IS
C
T
R
A
C
K
M
A
IN
S E C
SINGLE: Repeats all the tracks
on the selected disc.
R
E
P
E
T
S
IN
G
L E
CUSTOM
CUSTOM: All of the discs classi-
fied under one of the three CUS-
TOM banks are played repeatedly.
D
IS
C
T
R
A
C
K
M
A
IN
S
E
C
C
U
S
T
II
O
M
R
E
P
E
T
(OFF)
Cancels repeat play and returns the
unit to normal play mode.
÷
÷
To stop repeat playback, press 7.
When none of the ALL, SINGLE or CUSTOM play mode is
displayed (i.e. during PROGRAM play, BEST play, PREVIOUS scan
or HI-LITE scan), the tracks which would be played with these
functions are played repeatedly.
13
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
•
You can also use the remote control.
RANDOM
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
D
1
4
7
2
3
6
9
T
IM
E
◊Û¿X/?≥
Î
5
8
0
'
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
FILE –TYME CD MECHANISM
IS
C
–
+
OPEN/
CLOSE
6
7
41
¡¢
1
7
¡
8
4
3
¢
DIRECT LINER CONVERSION
1-BIT DLC
R
A
N
D
O
M
7
RANDOM
F
R
C
IL
E
U
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
0
C
O
D
N
P
L
O
A
Y
L
E
U
R
N
T
R
IT
Î
7
To playback tracks/ discs at random
(RANDOM play)
Notes!!
÷
RANDOM selects tracks at random from the disc(s) in the current play
mode and plays each track once. The selected play mode stops after
its contents are played back. (Refer to chart below)
Random playcannot be activated during the program mode. (Ifyou
press RANDOM during program play, the program contents will
be erased and the unit will start to play tracks at random from all
the discs.)
In the ALL or CUSTOM ( I,II or III) mode, if less than 100 discs are
loaded, the same track may be played more than once.
If you press REPEAT during random play, the contents of the
random mode are repeated. (RANDOM REPEAT)
If you press DISC (–/ +) during random play, random play is
canceled.
Play m ode selected
ALL
Play contents
÷
÷
÷
÷
Plays up to 100 tracks at random
from among all the discs (1 - 100).
Plays all the tracks from a single
disc at random.
SINGLE
If you press MODE during random play, random play is switched
to the ALL or SINGLE play.
Plays up to 100 tracks at random
from the discs into one of three
groups in CUSTOM file.
CUSTOM
Press RANDOM during ei-
ther play or stop m ode.
RANDOM
÷
The RANDOM indicator lights up
and random play according to
the current play mode starts.
To stop random play, press
7.
7
14
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
To program tracks/ discs in a desired
order (PROGRAM play)
Press 3.
3
5
The program play s tarts from the
track that was programmed first.
D
IS
C
T R
A
C
K
M
IN
S
E
C
÷
The remote control is the most convenient way to perform these
operations.
6
(
)
P
G
M
÷
÷
You can program up to 36 steps.
The parenthesis ( ) show operations for the m ain unit.
÷
Items stored in memory are saved for approximately 2 days, even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount ofmemoryused.
(Mem ory Back-Up Function).
D
P
O
W
E
R
H
I-L IT
E
P
R
E
P
V
IO
M
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
G
C
L
E
A
R
1
1
4
7
2
3
6
9
T
IM
E
The follow ing operations can only be perform ed
during norm al play, HI-LITE scan or PREVIOUS scan
5
8
0
2
3
2
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
<Program m ing tracks during norm al play>
(Direct program )
1. Press PGM (PROGRAM).
3
5
IS
C
–
+
1
7
¡
8
4
3
¢
R
A
N
D
O
M
•
Program mode is activated.
2. Press PGM (PROGRAM) during playback.
The current track is programmed.
F
R
C
IL
E
U
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
0
C
O
D
N
P
L
A
O
Y
L
E
U
R
N
T
R
IT
Î
•
<Program m ing during norm alplayback (rem ote controlonly)
(Preprogram m ing)
>
Operation exam ple:
Program m ing disc 2, track 7 as step 1,
and disc 5, track 3 as step 2.
You can program during normal playback.
P G M
2
3
4
1
(\Operation example
)
1
Press PGM (PROGRAM)dur-
ing stop m ode.
•
•
The player changes to program play when the current track
finishes playing back.
To change to program mode directly, press 3.
PROGRAM
(
)
The follow ing operations can only be perform ed
during stop m ode
2
Use the digit buttons to se-
lect the disc, then press DISC
SET.
2
<Program m ing an entire disc as one step>
(Disc all program )
«
3
(Use DISC (–/ +) to select the disc
number, then press PROGRAM.)
If you skip step
as step 1.
of the operation example, disc 2 is programmed
D IS C
S E T
D
IS
C
T R
A
C
K
M
IN
S
E
C
<Program m ing a pause (rem ote control only)
>
(Pause program )
4
, you can program a pause. When you press
8, “PA” appears in the display instead of the disc number.
P
G
M
If you press 8 at step
PROGRAM
DISC
=
(
)
The PGM indicator starts to blink.
÷
For example, when making a program for recording both sides of
a cassette tape, press 8 to insert a pause after programming the
tracks for one side. After turning the tape over, press 8 to resume
recording.
7
Use the digit buttons to se-
lect the track, and press
3
TRACK SET.
Notes!!
«
(Us e 41/¡¢ to s e le ct the
÷You cannot program a pause as the first step, or program two
pauses in a row.
÷When you program a pause, it counts as 1 step and reduces the
total number of tracks you can program.
T R A C K
S E T
track number, then press PROGRAM.)
D
IS
C
T R
A
C
K
M
IN
S
E
C
P
G
M
÷
÷
To erase a program ...
D
IS
C
T R
A
C
K
M
IN
S
E
C
Press 7twice during playback(oronce in stop mode). You can also
erase the program by pressing MODE, RANDOM, PREVIOUS, or
SINGLE LOADER PLAY in either play or stop mode (or by
pressing BEST in stop mode).
PROGRAM
41 ¡¢
=
(
)
P
G
M
To cancel a program step
D IS C
S E T
In stop mode, each time you press CLEAR, the last step in the
program is erased.
Repeat steps 2 and 3 to pro-
gram additional discs and
tracks.
4
5
÷ If a program m e d dis c is m is s ing or ins e rte d backw ards
\
\
during program play, “
n o dISC” appe ars in the dis play,
the s te p is automatically erased, and playback proceeds to the
next step.
Once the track times have been
added, the PGM indicator stops blink-
ing and the following display appears
(Total Time).
T R A C K
S E T
÷ Program contents are stored in memory even when the power
3
is turned off (STANDBY).
Notes!!
÷
D
IS
C
T R
A
C
K
M
IN
S
E
C
5
If step
is carried out before the accumulated time is displayed,
the program play starts and the time is not displayed.
When UNLOAD is pressed while a program has been entered, the
disc for the 1st program step comes on the center position and the
hood opens.
÷
P
G
M
PROGRAM
DISC
PROGRAM
÷
The display is not shown if the total time of the program is 100
minutes or more.
41 ¡¢
=
=
)
(
=
15
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
÷
÷
You can also use the remote control for these operations.
These operations can not be perform ed on the CD inserted into the SINGLE LOADER SLOT.
PREVIOUS
BEST
D
BEST
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
1
4
7
2
3
6
9
T
IM
E
5
8
0
D
◊Û¿X/?≥
Î
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
IS
C
–
+
'
PREVIOUS
FILE –TYME CD MECHANISM
1
7
¡
8
4
3
¢
R
A
N
D
O
M
OPEN/
CLOSE
6
7
41
¡¢
7
3
7
F
R
C
IL
E
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
O
D
N
P
L
O
A
Y
E
U
R
N
C
T
R
L
IT
Î
U
0
DIRECT LINER CONVERSION
1-BIT DLC
6
To store your favorite tracks (BEST play)
To find out w hich discs you’ve listened
to recently (PREVIOUS scan)
To use the one-touch m em ory, just press the BEST button w hile
playing a track you like. You can store up to 20 tracks.
÷
÷
This function scans the discs in reverse order, starting from
the last disc you played.
It can rem em ber up to 20 discs. If the total num ber of discs
exceeds 20, the oldest disc w ill be erased to m ake room for
the new disc.
Press BEST w hile playing a
BEST
track you like.
The BEST indicator blinks and the
disc and track number are stored in
memory.
Exam ple: If you played discs 1, 2, 9, 12 and 13 in order.
PREVIOUS
Press the PREVIOUS but-
<To listen to the m em orized tracks>
ton.
÷
BEST
Press BEST during stop
Approximately 10 seconds from
one minute into the first track of
each disc is played back, starting
from the last disc you played: 13,
12, 9, 2, 1.
m ode.
Th e BES T in d ic a t o r lig h t s a n d
playback s tarts from the m os t
re ce ntly m e m orize d track.
D
IS
C
T R
A
C
K
M
IN
S
E
C
A
L L
P
R
E
V
IO
U
S
S
C
A
N
Blink
÷
÷
÷
If you press CLEAR during Best playback, the current track is
erased and the next track starts to play.
You cannot memorize a track twice by pressing BEST during Best
playback.
If you press BEST to memorize a track when 20 tracks are already
memorized, the oldest track is erased from memory and the new
track is memorized.
3
Press 3 (or 6 ) w hen you
reach the disc you w ant to
hear.
÷
Previous disc scan is canceled
and normal play resumes.
÷
÷
The memorized contents are stored, even when the power is
turned off (STANDBY).
Items stored in memory are saved for approximately 2 days, even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount ofmemoryused.
(Mem ory Back-Up Function).
÷
÷
To cancel the scanning, press 7.
Discs played during random, program, HI-LITE scan, Best and
Single Loader playback are not included in the PREVIOUS scan.
If the first track is less than 1 minute long, about 10 seconds from
the beginning will be played. If the first track is less than 10
seconds long, the entire track will be played.
÷
÷
Items stored in memory are saved for approximately 2 days, even
if the power cord is unplugged. However, this period may be
shortened somewhat, depending on the amount ofmemoryused.
(Mem ory Back-Up Function).
16
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
÷
You can also use the remote control for these operations.
HI-LITE
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
HI-LITE
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
1
4
7
2
3
6
9
T
IM
E
D
◊Û¿X/?≥
5
8
0
Î
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
'
FILE –TYME CD MECHANISM
IS
C
–
+
1
7
¡
8
4
3
¢
OPEN/
CLOSE
6
7
41
¡¢
R
A
N
D
O
M
DIRECT LINER CONVERSION
1-BIT DLC
3
6
F
R
C
IL
E
U
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
0
C
O
D
N
P
L
O
A
Y
L
E
U
R
N
T
R
IT
Î
To scan quickly through tracks on a disc
(HI-LITE scan)
This function plays a 10 second portion located 1 minute from the
start of each track on all the discs in the current play mode.
<To3return to norm al playback>
<Disc scan>
Press HI-LITE during either
play or stop m ode.
Press 3 (or 6) w hen you
reach the track you w ant
to hear.
HI-LITE
÷
The unit plays a 10 second por-
tion located 1 minute into the
first track of each CD, starting
from the first CD.
HI-LITEscan is canceled and
norm al play resum es.
Press once
÷
To cancel HI-LITE scan, press 7.
The ”DISC” and “SCAN” indicator blinks.
Notes!!
÷
÷
÷
You can use 4 /¢ to skip to another track during track scan.
If the player is in ALL REPEAT mode, the HI-LITE scan will repeat.
If the track is less than 1 minute long, about 10 seconds from the
beginning of the track will be played. If the track is less than 10
seconds long, the entire track will be played.
<Track scan>
Press HI-LITE tw ice during
either play or stop m ode.
HI-LITE
÷
The unit plays a 10 second por-
tion located 1 minute into each
track of each CD, starting from
the first CD.
Press twice
The “SCAN” indicator blinks.
<Program scan>
Press HI-LITE during pro-
gram m ode.
HI-LITE
÷
The unit plays a 10 second por-
tion located 1 minute into each
track in the program.
Press once
The “SCAN” indicator blinks.
<Best selection m em ory scan>
Press HI-LITE during best
HI-LITE
selection m em ory play-
back.
÷
The unit plays a 10 second por-
tion located 1 minute into each
track in the best selection mem-
ory.
Press once
The “SCAN” indicator blinks.
17
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
÷
You can use the remote control.
D
P
O
W
E
R
H
I-L IT
E
P
R
E
V
IO
U
S
B
E
S
T
R
E
P
E
A
T
M
O
D
E
P
G
M
C
L
E
A
R
1
4
7
2
3
6
9
T
IM
E
TIME
5
8
0
D
S
IS
E
C
T
T
R
S
A
E
C
T
K
D
IS
C
–
+
1
7
¡
8
4
3
¢
R
A
N
D
O
M
F
R
C
IL
E
U
E
M
-P
-T
O
0
Y
T
0
P
E
9
E
C
0
C
O
D
N
P
L
O
A
Y
L
E
U
R
N
T
R
IT
Î
To use the TIME button
Press TIME during play-
T IM E
back.
Each tim e you pre s s TIME, the
display changes as follows.
Disc num ber, Track num ber and
Elapsed Tim e.
=
«
Rem aining tim e (TRACK)
«
Rem aining tim e (DISC)
«
Total elapsed tim e (TOTAL)
Notes!!
÷
÷
÷
Time remaining on the track may not be displayed for tracks
numbered greater than 24.
Time remaining on the disc is not displayed during RANDOM,
PROGRAM or BEST play.
During PROGRAM play
÷
During BEST play
Disc num ber, Track num ber
and Elapsed Tim e.
Disc num ber, Track num ber
and Elapsed Tim e.
=
=
«
«
Rem aining tim e (TRACK)
Rem aining tim e (TRACK)
«
«
Total num ber of steps
m em orized in BEST (TOTAL)
Total program tim e and
num ber of steps (TOTAL)
18
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer
to carry out repair work.
Sym ptom
Cause
Rem edy
Connect properly.
Check the settings of amplifier switches and
sound volume controls.
No sound
÷
÷
Output cables are connected incorrectlyorloosely.
Incorrect operation of stereo amplifier.
÷
÷
÷
÷
÷
Pin plugs and/or amplifier terminals are dirty.
Player is in pause mode.
The disc is loaded with the label side rightward.
÷
÷
÷
Clean away dirt.
Press 3 or 8.
Reload the disc with the label side leftward.
When playback is started, it
stops immediately.
Pauses orstops during playback.
÷
÷
Disc is inserted in the wrong way.
Smudges, etc., on the disc.
÷
÷
Insert the disc correctly with the label side
leftward.
Clean the smudges from the disc and then play
it again.
Remote control will not func-
tion.
÷
÷
Replace batteries.
Relocate remote control unit or remove ob-
struction.
÷
÷
Dead batteries.
Obstruction between player and remote control
unit.
Abnormalfunctioning ofthis unit maybe caused bystatic electricity, orotherexternalinterference. To restore normaloperation, unplug the ACpower
cord and then plug it in again.
SELF-DIAGNOSTICS FUNCTION
The unit incorporates a self-diagnostic function.
When an abnormality is detected during operation of the unit, an error message (service no.) appears on the unit‘s display automatically. Treat the
error by following the instructions in ”Counterm easures”.
Display on the unit
D IS
C
T R A C K
M
IN
S
E C
Service No.
Service No.
Unit Status
Counterm easures
Reload the discs properly.
(Insert only one disc in a slot.)
Check if there is a foreign object attached onto
the disc.
÷
÷
÷
U1
U2
U3
The disc may not be loaded properly in the rack.
There is an operation error in the mechanical section.
There is an error related to the hood.
Check if there is a foreign object in the rack.
÷
÷
Check if there is a foreign object in the rack.
Unplug the power cord then plug it in again.
÷
÷
Check if the hood is caught by anything.
Unplug the power cord then plug it in again.
If the same display appears again, there may be an error in the mechanical section. When requesting servicing, please also let us know the
service number displayed on the unit.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as
this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged
power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest
PIONEER authorized service center or your dealer for a replacement.
19
<PRB1268>
En
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
1. General
3. Output term inal
Audio line output
Control input jack
Control output jack
CD-DECK SYNCHRO jack
Optical digital output jack
Type ...........................................Compact disc digital audio system
Power requirements .............................................. AC 120V, 60 Hz
Power consumption ................................................................. 12W
Operating temperature ............................................... +5°C - +35°C
(+41°F - +95°F)
Weight ( without package ) ................................. 6.5 kg (14 lb 5 oz.)
External dimensions ......................... 420(W) X 402(D) X 190(H) mm
16-9/16(W) X 15-13/16(D) X 7-1/2(H) in.
4. Accessories
÷
÷
÷
÷
÷
Remote control unit .................................................................. 1
Size AA/R6P dry cell batteries ................................................... 2
Output cable ............................................................................. 1
Control cable ............................................................................. 1
Operating instructions ............................................................... 1
2. Audio section
Frequency response ................................................... 2 Hz - 20 kHz
S/N ratio .......................................................... 98 dB or more (EIAJ)
Dynamic range ................................................ 96 dB or more (EIAJ)
Channel separation ......................................... 96 dB or more (EIAJ)
Harmonic distortion ....................................... 0.003 % or less (EIAJ)
Level difference between channels ................. 1.0 dB or less (EIAJ)
Output voltage ........................................................... 2 Vrms (EIAJ)
Wow and flutter ............................... less than ±0.001 % (W.PEAK)
( below measurable level ) (EIAJ)
Note!!
Specifications and design subject to possible modification without
notice, due to improvements.
Channels ............................................................ 2-channel ( stereo )
Published by Pioneer Electronic Corporation.
Copyright © 1998 Pioneer Electronic Corporation.
All rights reserved.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until
it is too late, this manufacturer and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid prolonged exposure to
excessive noise. This list of sound levels is included for your protection.
Selecting fine audio equipment such as the unit you’ve just purchased is
only the start of your musical enjoyment. Now it’s time to consider how you
can maximize the fun and excitement your equipment offers. This manufac-
turer and the Electronic Industries Association’s Consumer Electronics
Group want you to get the most out of your equipment by playing it at a safe
level. One that lets the sound come through loud and clear without annoying
blaring or distortion-and, most importantly, without affecting your sensitive
hearing.
Decibel
Level
Example
30
40
50
60
70
80
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock
at two feet.
Sound can be deceiving. Over time your hearing “comfort level” adapts to
higher volumes of sound. So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER
CONSTANT EXPOSURE
90
100
120
140
180
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet plane
To establish a safe level:
÷ Start your volume control at a low setting.
÷ Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
Once you have established a comfortable sound level:
÷ Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss
in the future. After all, we want you listening for a lifetime.
PIONEER ELECTRONIC CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153, Japan
PIONEER ELECTRONICS [USA] INC.
PIONEER ELECTRONICS OF CANADA, INC.
P.O. BOX 1540, Long Beach, California 90801-1540
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
San Lorenzo Num 1009 3er Piso Desp. 302 Col. Del Valle, Mexico D.F. C.P.03100 TEL: 5-688-52-90
<98A00ZF0Z00>
Printed in China <PRB1268-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|