Operating Instructions
Blu-ray Disc PLAYER
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: inside of the unit
VRW2262 - A
D3-4-2-1-8*_C_En
Operating Environment
ꢀꢁꢂꢃꢄꢃꢅ
ꢀ#ꢁ$ꢂ&ꢃ!ꢄꢀꢁ!(ꢃ$"! ꢁ!&ꢀ&ꢁ #ꢁ$ꢂ&'$ꢁꢀꢂ!ꢅꢀꢆ' ꢃꢅꢃ&*ꢇ
ꢈꢉꢀ+ꢊꢀ&"ꢀꢈꢋꢉꢀ+ꢊꢀꢌꢈ ꢍꢀ+ꢎꢀ&"ꢀꢈꢏꢉꢀ+ꢎꢐꢑꢀꢒꢁ%%ꢀ&ꢆꢂ!ꢀꢓꢉꢀꢔꢕꢖꢀ
ꢌꢗ""ꢒꢃ!ꢄꢀ(ꢁ!&%ꢀ!"&ꢀꢘꢒ"ꢗꢙꢁꢅꢐ
ꢆ"ꢇ#%ꢈ)ꢈ!'ꢇꢉꢇꢊꢋ%ꢈꢇꢌꢉ+ꢉ%ꢍꢎꢇꢍ"ꢇ!"'ꢇ#ꢏꢉꢐꢈꢇꢉ!*ꢇ!ꢉꢑꢈꢍꢇ
ꢊꢏꢉ ꢈꢇ&"(%ꢐꢈ&ꢇꢒ&(ꢐꢌꢇꢉ&ꢇꢉꢇꢏꢋꢓꢌ'ꢈꢍꢇꢐꢉ!ꢍꢏꢈꢔꢇ"!ꢇ'ꢌꢈꢇ
ꢈ$(ꢋ# ꢈ!'ꢕꢇ ꢇ ꢇ
ꢖ
ꢗꢘꢗꢙꢗꢚꢗꢛꢉꢜꢁꢜꢝ!
ꢚ"ꢀ!"&ꢀꢃ!%&ꢂꢒꢒꢀ&ꢆꢃ%ꢀ'!ꢃ&ꢀꢃ!ꢀꢂꢀ#""$ꢒ*ꢀ(ꢁ!&ꢃꢒꢂ&ꢁꢅꢀꢂ$ꢁꢂꢛꢀ"$ꢀꢃ!ꢀ
ꢒ"ꢗꢂ&ꢃ"!%ꢀꢁ)#"%ꢁꢅꢀ&"ꢀꢆꢃꢄꢆꢀꢆ' ꢃꢅꢃ&*ꢀ"$ꢀꢅꢃ$ꢁꢗ&ꢀ%'!ꢒꢃꢄꢆ&ꢀꢌ"$ꢀ
%&$"!ꢄꢀꢂ$&ꢃꢜꢃꢗꢃꢂꢒꢀꢒꢃꢄꢆ&ꢐ
D3-4-2-1-7c_A_En
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filled
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
ꢀꢁꢂꢃꢄꢅꢆꢃꢄꢇꢂꢇꢈꢆꢉꢃꢄꢇꢂ
ꢊ$!)ꢇ%)./ꢋ''%)#ꢇ/$%.ꢇ0)%/ꢎꢇ(ꢋ&!ꢇ.0-!ꢇ/*ꢇ'!ꢋ1!ꢇ.+ꢋꢌ!ꢇ
ꢋ-*0) ꢇ/$!ꢇ0)%/ꢇ"*-ꢇ1!)/%'ꢋ/%*)ꢇ/*ꢇ%(+-*1!ꢇ$!ꢋ/ꢇ
-ꢋ %ꢋ/%*)ꢇꢒꢋ/ꢇ'!ꢋ./ꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ/*+ꢎꢇꢍꢎꢇꢌ(ꢇꢋ/ꢇ-!ꢋ-ꢎꢇꢋ) ꢇ
ꢍꢎꢇꢌ(ꢇꢋ/ꢇ!ꢋꢌ$ꢇ.% !ꢔꢕ
or moisture.
D3-4-2-1-3_B_En
ꢊꢆꢏꢂꢄꢂꢐ
ꢀꢁꢁꢂꢃꢂꢄꢇ
ꢑ'*/.ꢇꢋ) ꢇ*+!)%)#.ꢇ%)ꢇ/$!ꢇꢌꢋꢒ%)!/ꢇꢋ-!ꢇ+-*1% ! ꢇ"*-ꢇ
1!)/%'ꢋ/%*)ꢇ/*ꢇ!).0-!ꢇ-!'%ꢋꢒ'!ꢇ*+!-ꢋ/%*)ꢇ*"ꢇ/$!ꢇ
+-* 0ꢌ/ꢎꢇꢋ) ꢇ/*ꢇ+-*/!ꢌ/ꢇ%/ꢇ"-*(ꢇ*1!-$!ꢋ/%)#ꢕꢇꢃ*ꢇ
+-!1!)/ꢇ"%-!ꢇ$ꢋ4ꢋ- ꢎꢇ/$!ꢇ*+!)%)#.ꢇ.$*0' ꢇ)!1!-ꢇꢒ!ꢇ
ꢒ'*ꢌ&! ꢇ*-ꢇꢌ*1!-! ꢇ2%/$ꢇ%/!(.ꢇꢒ.0ꢌ$ꢇꢋ.ꢇ)!2.+ꢋ+!-.ꢎꢇ
/ꢋꢒ'!ꢗꢌ'*/$.ꢎꢇꢌ0-/ꢋ%).ꢔꢇ*-ꢇꢒ3ꢇ*+!-ꢋ/%)#ꢇ/$!ꢇ
ꢁꢀ ꢁꢂꢀꢀꢃꢄꢅꢆꢆꢇꢈꢆꢀꢇꢈꢀ ꢁꢂꢀꢉꢊꢀꢀ ꢇꢂꢋꢉꢀꢉꢇꢌꢀꢍꢀꢂꢀꢎꢏꢀꢉꢊꢀꢀ ꢁꢄꢄꢁꢐꢇꢈꢆꢀ
ꢀꢋꢀꢑꢉꢇꢁꢈꢀꢑꢎꢂꢀ ꢅꢄꢄꢒꢓ
ꢅꢆꢇꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ+ꢈ !ꢈꢋ!ꢇꢇ%$,ꢇ'ꢇ(*%%!-ꢇꢌ ꢊꢊꢇ'(ꢇ
ꢈꢍꢍ$'ꢌ #ꢉꢇ)$ꢇꢍ$*#)'-ꢇ$'ꢇ'ꢇꢉ $#ꢕꢇꢎꢇꢇ(*'ꢇꢇ)ꢆꢈ)ꢇ)ꢆꢇꢇ
%$,ꢇ'ꢇ(*%%!-ꢇ+$!)ꢈꢉꢇꢇ$ꢊꢇ)ꢆꢇꢇꢈ'ꢇꢈꢇ,ꢆꢇ'ꢇꢇ)ꢆ (ꢇ*# )ꢇ
, !!ꢇꢋꢇꢇ*(ꢇꢌꢇ"ꢇꢇ)(ꢇ)ꢆꢇꢇ'ꢇ&* 'ꢇꢌꢇ+$!)ꢈꢉꢇꢇꢒꢇꢕꢉꢕꢎꢇ ꢏꢐꢇꢑꢇ
3
En
!,0%+(!)/ꢇ*)ꢇ/$%ꢌ&ꢇꢌꢋ-+!/ꢇ*-ꢇꢋꢇꢒ! ꢕ
ꢇ
ꢓꢔꢗꢕꢗ ꢗꢍꢗꢖꢒꢗꢆꢗꢁ)
$'ꢇꢒ ꢐꢇꢑꢔꢇ,' ))ꢇ#ꢇ$#ꢇ)ꢆꢇꢇ'ꢇꢈ'ꢇ%ꢈ#ꢇ!ꢕꢇ
ꢓꢏꢗꢔꢗ ꢗꢒꢗꢔꢕꢁꢕꢖ#
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢀꢛꢁꢂꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢆꢀꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢌꢅꢍꢊꢀꢋꢅꢇꢀꢎꢏꢇꢐꢈꢀꢇꢈꢍꢀꢀꢁꢀ
ꢅ ꢇꢃꢍꢇꢀ$ꢅ ꢀ"ꢏꢋꢇꢀꢇꢅꢀ ꢊꢍꢑꢀꢇꢈꢍꢀꢂꢃ ꢄꢀꢎ ꢊꢇꢀꢒꢍꢀꢓꢍꢎꢅ!ꢍꢌꢀ
ꢏꢋꢌꢀꢏꢂꢂꢓꢅꢂꢓꢉꢏꢇꢍꢀꢅꢋꢍꢀꢆꢉꢇꢇꢍꢌꢔꢀꢕꢍꢂꢃꢏꢐꢍꢎꢍꢋꢇꢀꢏꢋꢌꢀ
ꢎꢅ ꢋꢇꢉꢋꢄꢀꢅꢆꢀꢏꢋꢀꢀꢁꢀꢂꢃ ꢄꢀꢅꢋꢀꢇꢈꢍꢀꢂꢅ"ꢍꢓꢀꢊ ꢂꢂꢃ$ꢀꢐꢅꢓꢌꢀꢅꢆꢀ
ꢇꢈꢉꢊꢀ ꢋꢉꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢂꢍꢓꢆꢅꢓꢎꢍꢌꢀꢅꢋꢃ$ꢀꢒ$ꢀꢖ ꢏꢃꢉꢆꢉꢍꢌꢀ
ꢊꢍꢓ!ꢉꢐꢍꢀꢂꢍꢓꢊꢅꢋꢋꢍꢃꢔꢀ ꢆꢀꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢇꢅꢀꢏꢋꢀꢀꢁꢀꢅ ꢇꢃꢍꢇꢑꢀꢇꢈꢍꢀ
ꢐ ꢇꢗꢅꢆꢆꢀꢂꢃ ꢄꢀꢐꢏꢋꢀꢐꢏ ꢊꢍꢀꢊꢍ!ꢍꢓꢍꢀꢍꢃꢍꢐꢇꢓꢉꢐꢏꢃꢀꢊꢈꢅꢐꢘꢔꢀꢙꢏꢘꢍꢀ
ꢊ ꢓꢍꢀꢉꢇꢀꢉꢊꢀꢂꢓꢅꢂꢍꢓꢃ$ꢀꢌꢉꢊꢂꢅꢊꢍꢌꢀꢅꢆꢀꢏꢆꢇꢍꢓꢀꢓꢍꢎꢅ!ꢏꢃꢔ
ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢂꢃꢀꢋꢆꢅꢀꢌꢍꢎꢍꢅꢏꢐꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢑꢀꢒꢎꢓꢀ
ꢋꢏꢂꢐꢈꢅꢍꢀꢇꢈꢍꢀꢊꢆꢀꢈꢃꢍꢀꢋꢆꢅꢀꢆꢊꢁꢍꢅꢀꢊꢁꢏꢎꢀꢁꢆꢈꢃꢍꢁꢆꢐꢇꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀ
ꢔꢃꢈꢉꢁꢀꢏꢃꢀꢐꢆꢎꢌꢕꢊꢍꢅꢖꢀꢈꢃꢍꢀꢋꢆꢅꢀ ꢈꢃꢂꢎꢍꢃꢃꢀꢄꢈꢅꢄꢆꢃꢍꢃꢀꢂꢎꢀꢏꢀ
ꢅꢍꢃꢊꢏꢈꢅꢏꢎꢊꢀꢆꢅꢀꢈꢃꢍꢀꢂꢎꢀꢏꢀꢉꢏꢅꢀꢆꢅꢀꢃꢁꢂꢄꢗꢀꢏꢎꢇꢀꢘꢁꢂꢉꢁꢀ
ꢅꢍꢙꢈꢂꢅꢍꢃꢀꢅꢍꢄꢏꢂꢅꢀꢘꢂꢐꢐꢀ ꢍꢀꢉꢁꢏꢅꢌꢍꢇꢀꢋꢆꢅꢀꢍꢚꢍꢎꢀꢇꢈꢅꢂꢎꢌꢀꢊꢁꢍꢀ
ꢘꢏꢅꢅꢏꢎꢊꢓꢀꢄꢍꢅꢂꢆꢇꢑꢀ
ꢀꢁꢂꢃꢄꢅꢆ
ꢀ ꢁꢂꢃꢄꢅ ꢃꢆꢇꢅꢇꢈꢉꢊ ꢋ
ꢚꢈꢍꢀꢍꢖ ꢉꢂꢎꢍꢋꢇꢀꢊꢈꢅ ꢃꢌꢀꢒꢍꢀꢌꢉꢊꢐꢅꢋꢋꢍꢐꢇꢍꢌꢀꢒ$ꢀꢓꢍꢎꢅ!ꢉꢋꢄꢀ
ꢇꢈꢍꢀꢎꢏꢉꢋꢊꢀꢂꢃ ꢄꢀꢆꢓꢅꢎꢀꢇꢈꢍꢀ"ꢏꢃꢃꢀꢊꢅꢐꢘꢍꢇꢀ"ꢈꢍꢋꢀꢃꢍꢆꢇꢀ
ꢋ ꢊꢍꢌꢀꢆꢅꢓꢀꢏꢀꢃꢅꢋꢄꢀꢂꢍꢓꢉꢅꢌꢀꢅꢆꢀꢇꢉꢎꢍꢀꢛꢆꢅꢓꢀꢍ#ꢏꢎꢂꢃꢍꢑꢀ"ꢈꢍꢋꢀ
ꢀꢁꢂꢃꢄꢅꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢌ!ꢀꢆꢇꢅꢀꢈꢄꢍꢎꢏꢀꢂꢉꢀꢂꢉꢆꢀꢈꢍꢄꢄꢀꢉꢍꢆꢀꢆꢇꢅꢀ
ꢈꢄꢍꢎꢀꢌ!ꢀꢆꢍꢎꢎꢐꢂꢎꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢁꢂꢃꢀꢂꢅꢑꢅꢊꢀꢆꢉꢍꢋꢇꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀ
ꢋꢉꢊꢃꢀ ꢇꢅꢂꢀ!ꢉꢍꢊꢀꢇꢁꢂꢃꢒꢀꢁꢊꢅꢀ ꢅꢆꢀꢁꢒꢀꢆꢇꢐꢒꢀꢋꢉꢍꢄꢃꢀꢋꢁꢍꢒꢅꢀꢁꢀ
ꢒꢇꢉꢊꢆꢀꢋꢐꢊꢋꢍꢐꢆꢀꢉꢊꢀꢅꢄꢅꢋꢆꢊꢐꢋꢀꢒꢇꢉꢋꢓꢏꢀꢂꢉꢀꢂꢉꢆꢀꢈꢄꢁꢋꢅꢀꢆꢇꢅꢀꢍꢂꢐꢆꢔꢀꢁꢀ
ꢈꢐꢅꢋꢅꢀꢉꢕꢀꢕꢍꢊꢂꢐꢆꢍꢊꢅꢔꢀꢅꢆꢋꢏꢔꢀꢉꢂꢀꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢔꢀꢉꢊꢀꢈꢐꢂꢋꢇꢀꢆꢇꢅꢀ
ꢋꢉꢊꢃꢏꢀ ꢅꢑꢅꢊꢀꢖꢁꢓꢅꢀꢁꢀꢓꢂꢉꢆꢀꢐꢂꢀꢆꢇꢅꢀꢋꢉꢊꢃꢀꢉꢊꢀꢆꢐꢅꢀꢐꢆꢀ ꢐꢆꢇꢀꢉꢆꢇꢅꢊꢀ
ꢋꢉꢊꢃꢒꢏꢀꢗꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢒꢀꢒꢇꢉꢍꢄꢃꢀꢌꢅꢀꢊꢉꢍꢆꢅꢃꢀꢒꢍꢋꢇꢀꢆꢇꢁꢆꢀꢆꢇꢅ!ꢀ
ꢁꢊꢅꢀꢂꢉꢆꢀꢄꢐꢓꢅꢄ!ꢀꢆꢉꢀꢌꢅꢀꢒꢆꢅꢈꢈꢅꢃꢀꢉꢂꢏꢀꢘꢀꢃꢁꢖꢁꢎꢅꢃꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀ
ꢋꢁꢂꢀꢋꢁꢍꢒꢅꢀꢁꢀꢕꢐꢊꢅꢀꢉꢊꢀꢎꢐꢑꢅꢀ!ꢉꢍꢀꢁꢂꢀꢅꢄꢅꢋꢆꢊꢐꢋꢁꢄꢀꢒꢇꢉꢋꢓꢏꢀꢃꢇꢅꢋꢓꢀ
ꢆꢇꢅꢀꢈꢉ ꢅꢊꢀꢋꢉꢊꢃꢀꢉꢂꢋꢅꢀꢐꢂꢀꢁꢀ ꢇꢐꢄꢅꢏꢀꢙꢕꢀ!ꢉꢍꢀꢕꢐꢂꢃꢀꢐꢆꢀꢃꢁꢖꢁꢎꢅꢃꢔꢀ
ꢋꢉꢂꢆꢁꢋꢆꢀꢆꢇꢅꢀꢚꢐꢉꢂꢅꢅꢊꢀꢒꢅꢊꢑꢐꢋꢅꢀꢋꢅꢂꢆꢅꢊꢀꢉꢂꢀꢆꢇꢅꢀꢌꢁꢋꢓꢀꢋꢉꢑꢅꢊꢔꢀꢉꢊꢀ
!ꢉꢍꢊꢀꢃꢅꢁꢄꢅꢊꢀꢕꢉꢊꢀꢁꢀꢊꢅꢈꢄꢁꢋꢅꢖꢅꢂꢆꢏ
ꢅꢋꢀ!ꢏꢐꢏꢇꢉꢅꢋꢜꢔꢀ
ꢀ
ꢀ
ꢀꢀꢁꢁꢁꢂꢁꢂꢁꢃꢂ ꢄ ꢅꢃ
CAUTION
The ꢀꢁSTANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
(for example, when on vacation).
D3-4-2-2-2a_A_En
WARNING:ꢀꢛꢏꢀꢁꢂꢃꢀꢄꢀꢅꢆꢇꢀꢈꢉꢊꢁꢀꢉꢀꢀꢅꢆꢃꢋꢀꢌꢊꢉꢁꢍꢈꢅꢀꢉꢊꢀ
ꢈꢉꢊꢁꢋꢀꢎꢋꢋꢉꢈꢃꢎꢅꢇꢁꢀꢏꢃꢅꢆꢀꢎꢈꢈꢇꢋꢋꢉꢊꢃꢇꢋꢀꢋꢉꢂꢁꢀꢏꢃꢅꢆꢀꢅꢆꢇꢀ
ꢌꢊꢉꢁꢍꢈꢅꢀꢏꢃꢂꢂꢀꢇꢐꢌꢉꢋꢇꢀꢑꢉꢍꢀꢅꢉꢀꢈꢆꢇꢒꢃꢈꢎꢂꢋꢀꢂꢃꢋꢅꢇꢁꢀꢉꢀꢀ
ꢌꢊꢉꢌꢉꢋꢃꢅꢃꢉꢀꢀꢓꢔꢀꢕꢀꢉꢏꢀꢀꢅꢉꢀꢅꢆꢇꢀꢖꢅꢎꢅꢇꢀꢉꢗꢀꢃꢎꢂꢃꢗꢉꢊꢀꢃꢎꢀꢎꢀꢁꢀ
ꢉꢅꢆꢇꢊꢀꢄꢉꢘꢇꢊꢀꢒꢇꢀꢅꢎꢂꢀꢇꢀꢅꢃꢅꢃꢇꢋꢀꢅꢉꢀꢈꢎꢍꢋꢇꢀꢈꢎꢀꢈꢇꢊꢀꢎꢀꢁꢀ
ꢃꢊꢅꢆꢀꢁꢇꢗꢇꢈꢅꢀꢉꢊꢀꢉꢅꢆꢇꢊꢀꢊꢇꢌꢊꢉꢁꢍꢈꢅꢃꢘꢇꢀꢆꢎꢊꢒꢄ
Wash hands after handling
ꢀ
D36-P4_A_En
ꢀꢁꢂꢃꢀꢄꢅꢆꢇꢈꢉꢊꢀꢉꢆꢋꢊꢌꢂꢋꢃꢀꢍꢎꢅꢉꢈꢅꢏꢐꢀꢂꢂꢃꢄꢆꢃꢌꢑꢀꢆꢒꢀꢊꢁꢂꢃꢀ
ꢍꢌꢊꢎꢅꢂꢌꢑꢀꢍꢌꢏꢀꢓꢎꢀꢅꢎꢔꢈꢑꢌꢊꢎꢇꢀꢇꢈꢎꢀꢊꢆꢀꢎꢋꢕꢂꢅꢆꢋꢍꢎꢋꢊꢌꢑꢀ
ꢉꢆꢋꢃꢂꢇꢎꢅꢌꢊꢂꢆꢋꢃꢐꢀꢅꢆꢅꢀꢇꢂꢃꢄꢆꢃꢌꢑꢀꢆꢅꢀꢅꢎꢉꢏꢉꢑꢂꢋꢔꢀꢂꢋꢒꢆꢅꢍꢌꢊꢂꢆꢋꢖꢀ
ꢄꢑꢎꢌꢃꢎꢀꢉꢆꢋꢊꢌꢉꢊꢀꢏꢆꢈꢅꢀꢑꢆꢉꢌꢑꢀꢌꢈꢊꢁꢆꢅꢂꢊꢂꢎꢃꢀꢆꢅꢀꢊꢁꢎꢀꢆꢑꢎꢉꢊꢅꢆꢋꢂꢉꢃꢀ
ꢋꢇꢈꢃꢊꢅꢂꢎꢃꢀꢗꢑꢑꢂꢌꢋꢉꢎꢀꢘꢀꢙꢙꢙꢐꢎꢂꢌꢎꢐꢆꢅꢔꢐꢀ
ꢗꢌꢘꢙꢚꢛꢀ
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
We Want You Listening For A Lifetime
Since hearing damage from loud noise is often
undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid
prolonged exposure to excessive noise. This list of
sound levels is included for your protection.
Selecting fine audio equipment such as the unit
you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how
you can maximize the fun and excitement your
equipment offers. This manufacturer and the
Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without
annoying blaring or distortion-and, most importantly,
without affecting your sensitive hearing.
Decibel
Level Example
30 Quiet library, soft whispers
40 Living room, refrigerator, bedroom away from traffic
50 Light traffic, normal conversation, quiet office
60 Air conditioner at 20 feet, sewing machine
70 Vacuum cleaner, hair dryer, noisy restaurant
80 Average city traffic, garbage disposals, alarm clock
at two feet.
Sound can be deceiving. Over time your hearing
“comfort level” adapts to higher volumes of sound.
So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by
setting your equipment at a safe level BEFORE your
hearing adapts.
THE FOLLOWING NOISES CAN BE DANGEROUS
UNDER CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers,
thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it
comfortably and clearly, and without distortion.
Information courtesy of the Deafness Research Foundation.
Once you have established a comfortable sound
level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent
hearing damage or loss in the future. After all, we
want you listening for a lifetime.
S001_En
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Playing from the Home Media Gallery . . . . . . . . . . . . . . . . . . . . . . .35
Playing discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Playing video files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Playing image files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playing audio files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Playing in the desired order (HMG Playlist). . . . . . . . . . . . . . . . . .38
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . 7
Types of discs/files that can be played. . . . . . . . . . . . . . . . . . . . . . . . 8
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
05 Adjusting audio and video
Adjusting the video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Adjusting the audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Adjusting the Audio DRC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Adjusting the output level of the different speakers during
BD/DVD playback (Channel Level) . . . . . . . . . . . . . . . . . . . . . . . . .41
Adjusting the audio delay (Lip Sync) . . . . . . . . . . . . . . . . . . . . . . .42
02 Connecting up
Connecting using an HDMI cable . . . . . . . . . . . . . . . . . . . . . . . . . . 15
About HDMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
About KURO LINK function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting an AV receiver or amplifier . . . . . . . . . . . . . . . . . . . . 17
Connecting video and audio cables. . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting a TV using a component video cable and an audio
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting a TV using a video cable and an audio cable. . . . . . 18
Connecting an AV receiver or amplifier using audio cables . . . . 19
Connecting an AV receiver or amplifier using a digital audio
cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Network connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting via an Ethernet hub . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
06 Advanced settings
Changing the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Operating the Initial Setup screen . . . . . . . . . . . . . . . . . . . . . . . . .43
Stretching widescreen pictures vertically
(Anamorphic Zoom). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Eliminating extraneous noise to play with high quality sound
(Pure Audio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Restoring all the settings to the factory default settings . . . . . . .53
About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Language Code Table and Country/Area Code Table . . . . . . . . . .55
07 Additional information
Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Moving the player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Place of installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Turn the power off when not using the player . . . . . . . . . . . . . . . .64
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Cleaning the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Caution for when the unit is installed in a rack with a glass
door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Cleaning the pickup lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Software updating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
KURO LINK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
03 Getting Started
Making settings using the Setup Navigator menu . . . . . . . . . . . . . 21
Operating the TV with the player’s remote control . . . . . . . . . . . . . 23
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Using the TOOLS menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Switching the video output terminal to be viewed . . . . . . . . . . . . . 25
Switching the output video resolution . . . . . . . . . . . . . . . . . . . . . . . 25
04 Playback
Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Forward and reverse scanning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Playing specific titles, chapters or tracks . . . . . . . . . . . . . . . . . . . 28
Skipping content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Playing in slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Step forward and step reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Switching the camera angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Switching the subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Switching the audio streams/channels . . . . . . . . . . . . . . . . . . . . 30
Switching the secondary video . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Displaying the disc information. . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Using the Play Mode functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Playing from a specific time (Time Search) . . . . . . . . . . . . . . . . . 31
Playing a specific title, chapter or track (Search) . . . . . . . . . . . . 31
Playing a specific section within a title or track repeatedly
(A-B Repeat). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Playing repeatedly (Repeat Play) . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Playing in random order (Random Play). . . . . . . . . . . . . . . . . . . . 33
About Play Mode types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
01
Before you start
Putting the batteries in the
remote control
What’s in the box
Audio cable (white/red plugs) x 1
Remote control x 1
1
Open the rear cover.
STANDBY/ON
OPEN/CLOSE
TV CONTROL
INPUT
SELECT
CH
VOL
AUDIO SUBTITLE ANGLE FL DIMMER
Video cable (yellow plugs) x 1
Press lightly on this
part and slide into
the direction of the
arrow.
CLEAR
ENTER
SECONDARY
AUDIO
VIDEO
OUTPUT
RESOLUTION
BNC-RCA adapter x 3
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
Use this to connect an RCA pin type
cable to the COMPONENT VIDEO
terminal.
TOP MENU
TOOLS
2
Insert the batteries (AA/R6 x 2).
Insert as indicated by the / marks into the battery compartment.
ENTER
HOME
MENU
RETURN
PLAY
PREV
RED
PAUSE
GREEN
STOP
BLUE
NEXT
YELLOW
Insert the negative
() side first.
VIDEO ADJUST
AA/R6 dry cell batteries x 2
BD PLAYER
3
Close the rear cover.
Close securely (a click should be heard).
LAN cable x 1
Power cord x 1
Warranty card
Operating instructions (this manual)
Caution
• Do not mix new and old batteries together.
• Batteries may have different voltages, even if they look similar.
Do not use different kinds of batteries together.
• To prevent leakage of battery fluid, remove the batteries if you do
not plan to use the remote control for a long period of time (1
month or more). If the fluid should leak, wipe it carefully off the
inside of the case, then insert new batteries.
• When disposing of used batteries, please comply with
governmental regulations or environmental public instruction’s
rules that apply in your country/area.
• WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater. This
can cause batteries to leak, overheat, explode or catch fire. It
can also reduce the life or performance of batteries.
D3-4-2-3-3_En
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of discs/files that can be played
01
Playable discs
Discs with the logo marks below indicated on the disc label, package or jacket can be played.
Logo
Application format
Disc type
CD-DA
1
2
BDAV
DVD-Video DVD VR
BDMV
DATA-DISC
DTS-CD
BD-ROM
BD-R
BD
BD-RE
DVD-ROM
DVD-R
DVD
DVD-R DL
(Dual Layer)
DVD-RW
DVD+R
DVD+RW
CD-DA
(Audio CD)
CD
CD-R
CD-RW
CD-ROM
1. Including the AVCHD format.
2. Discs on which video, image or audio files are recorded
“Blu-ray Disc” and
are trademarks.
is a trademark of DVD Format/Logo Licensing Corporation.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs that cannot be played
• Non-finalized (Non-closed) BD-R discs in the BDMV format
• HD DVDs
01
• DVD Audio discs
• DVD-RAM discs
• Non-finalized DVD-R/-RW/+R/+RW discs in the DVD-Video
format and AVCHD format
Manufactured under license under U.S. Patent #: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide
patents issued & pending. DTS is a registered trademark and the DTS
logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
• Non-finalized Dual Layer DVD-R discs in the DVD VR format
• Non-finalized CD-R/-RW discs
• SACDs
• Video CDs
Playing BDs
• BDs (BDMV) compatible with the formats below can be played.
• SVCDs
This player conforms to NTSC standards. Discs for which “NTSC” is
indicated on the disc label, package or jacket can be played.
– Blu-ray Disc Read-Only (ROM) Format Version 2
– Blu-ray Disc Recordable (R) Format Version 2 (finalize (close)
them before playing them on this player)
Note
– Blu-ray Disc Rewritable (RE) Format Version 3
• Some discs cannot be played, even if one of the logo marks on
the previous page is indicated.
This player supports BD-ROM Profile 1 Version 1.1.
BONUSVIEW Functions such as playback of secondary video
(Picture-in-Picture) and secondary audio can be used. For
details on secondary video and secondary audio playback, refer
to the disc’s instructions.
• To play 8 cm discs, set the disc in the 8 cm disc depression in
the center of the disc tray. No adapter is necessary. 8 cm BD-
ROMs cannot be played.
About audio formats
The following audio formats are supported on this player:
• Dolby TrueHD
“BONUSVIEW” is trademark of Blu-ray Disc Association.
• Dolby Digital Plus
When a BD-ROM is played, additional data may be stored in the
player’s memory area (local storage). If the message indicating
low memory (local storage) appears, erase the BDMV data
(page 51).
• Dolby Digital
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
• MPEG
• BDs (BDAV) compatible with the formats below can be played.
– Blu-ray Disc Recordable (R) Format Version 1
– Blu-ray Disc Rewritable (RE) Format Version 2
• Dual Layer BDs can be played.
• MPEG-2 AAC
• Linear PCM
To enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio and DTS-HD High Resolution Audio, it is
recommended to connect the player to an AV receiver or amplifier
compatible with these audio formats using an HDMI cable. After
loading a BD containing sound in one of these audio formats, select
the audio format on the menu screen.
• Video, image and audio files recorded on BDs cannot be played.
• 8 cm BD-ROMs cannot be played.
Playing DVDs
• DVD-Video can be played.
• DVD-R/-RW/+R/+RW discs recorded in the DVD-Video format
can be played (finalize them before playing them on this player).
See About the audio output settings on page 54 for the output
conditions of the different formats.
• DVD-R/-RW discs recorded in the VR format (Video Recording
format) can be played.
This label indicates playback compatibility with DVD-RW discs
recorded in VR format (Video Recording format). However, for discs
recorded with a record-only-once encrypted program, playback can
only be achieved using a CPRM compatible device.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• DVDs recorded in the AVCHD format can be played (finalize
them before playing them on this player).
Playing discs created on computers or BD/
DVD recorders
01
• It may not be possible to play discs recorded using a computer
due to the application settings or computer’s environment
settings. Record discs in a format playable on this player. For
details, contact the dealer.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic
Corporation and Sony Corporation.
• It may not be possible to play discs recorded using a computer
or a BD/DVD recorder, if burn quality is not good due to
characteristics of the disc, scratches, dirt on the disc, dirt on the
recorder’s lens, etc.
• Video, image and audio files recorded on DVD-R/-RW/+R/+RW
discs can be played. See Playable files below.
• Dual Layer DVDs can be played. However, non-finalized Dual
Layer DVD-R discs recorded in the VR format cannot be played
(finalize them before playing them on this player).
Playable files
• HD DVD, DVD Audio and DVD-RAM discs cannot be played.
Video, image and audio files recorded on DVDs and CDs can be
played.
About region numbers
Blu-ray Disc Player and BD-ROM or DVD-Video discs are assigned
region numbers according to the region in which they are sold.
Caution
This player’s region numbers are:
• BD-ROM: A
• In DVD, only the one recorded by the ISO 9660 file system can be
played.
• DVD-Video: 1
• Some files may not be playable.
Discs not including these numbers cannot be played. Discs
playable on this player are as shown below.
• For some files, it may not be possible to use certain functions
during playback.
• It may not be possible to play some files, even if they have the
extension of a file playable on this player.
• BDs: A (including A) and ALL
• DVDs: 1 (including 1) and ALL
• Files protected by DRM (Digital Rights Management) cannot be
played (not including DivX VOD files).
Supported video file formats
• DivX
DivX is a media technology created by DivX, Inc. DivX media files
contain not only video but also advanced media features like
subtitles and alternate audiotracks, etc.
Playing CDs
• Audio CDs (CD-DAs and DTS-CDs) can be played.
Conform to the size under 720 x 480 pixels.
DivX files encoded with GMC/Qpel option cannot be played.
• Video, image and audio files recorded on CDs can be played.
See Playable files below.
Only audio signals with MP3 or Dolby Digital (AC3) format are
output.
• CD-R/-RW discs that are not finalized cannot be played.
• SACD, Video CD and Super VCD discs cannot be played.
Note that files other than the ones containing DivX video cannot
be played, even if they have the extension “.avi”.
• Regarding copy protected CDs: This player is designed to
conform to the specifications of the Audio CD format. This
player does not support the playback or function of discs that do
not conform to these specifications.
DualDisc playback
A DualDisc is a new two-sided disc, one side of which contains DVD
content — video, audio, etc. — while the other side contains non-
DVD content such as digital audio material.
®
Official DivX Certified product.
®
®
Plays all versions of DivX video (including DivX 6) with standard
playback of DivX media files.
The DVD side of a DualDisc can be played on this player (excluding
any DVD-Audio content).
®
DivX, DivX Certified, and associated logos are trademarks of DivX,
Inc. and are used under license.
The non-DVD, audio side of the disc is not compatible with this
player.
It is possible that when loading or ejecting a DualDisc, the opposite
side to that being played will be scratched. Scratched discs may not
be playable.
For more detailed information on the DualDisc specification, please
refer to the disc manufacturer or disc retailer.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
01
Note
• DivX VOD files are protected by DRM. They can only be played
on registered devices.
– You may be requested by the file distributor to input the DivX
VOD registration code for authorization of the player in order
to play DivX VOD files. This player’s DivX VOD registration
code can be checked at Initial Setup Playback DivX
VOD Registration Code (page 45).
Remote Control
STANDBY/ON
OPEN/CLOSE
1
15
16
– DivX VOD files for which the player’s DivX VOD registration
code is not authorized cannot be played (Authorization
Error is displayed).
TV CONTROL
INPUT
SELECT
CH
VOL
2
3
– The number of views is restricted for some DivX VOD files.
When such files are played on this player, the remaining
number of views is displayed. Files for which the remaining
number of views has reached 0 cannot be played (Rental
Expired is displayed). Files for which the number of views is
not restricted can be played as many times as you like (the
remaining number of views is not displayed).
FL DIMMER
AUDIO SUBTITLE ANGLE
4
17
5
6
CLEAR
ENTER
OUTPUT
RESOLUTION
Supported image file formats
• JPEG
SECONDARY
AUDIO
VIDEO
18
VIDEO SELECT PLAY MODE
File format: JFIF Ver1.02/Exif Ver.2.2
Resolution: Up to 4096 x 4096 pixels
Only baseline JPEG files are supported.
7
8
HOME MEDIA
GALLERY
19
21
DISPLAY POPUP MENU
MENU
20
22
TOOLS
TOP MENU
9
Supported audio file formats
• Windows Media™ Audio 9 (WMA9)
Bit rate: Up to 192 kbps
Sampling frequencies: 22.05 kHz, 32 kHz, 44.1 kHz and 48 kHz
ENTER
10
11
12
HOME
MENU
RETURN
23
Windows Media is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
PLAY
This product includes technology owned by Microsoft Corporation
and cannot be used or distributed without a license from
Microsoft Licensing, Inc.
PREV
RED
PAUSE
STOP
BLUE
NEXT
GREEN
YELLOW
13
14
VIDEO ADJUST
• MPEG-1 Audio Layer 3 (MP3)
Bit rate: Up to 320 kbps
Sampling frequencies: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz
Playable file extensions
• Video files
.divx and .avi
• Image files
BD PLAYER
.jpg and .jpeg
• Audio files
.wma and .mp3
1
STANDBY/ON
Press to turn the power on and off.
2
TV CONTROL
Your TV can be controlled using the player’s remote control
(page 23).
– Press to turn the TV’s power on and off.
INPUT SELECT – Press to switch the TV’s input.
CH +/– – Press to select the TV channel.
VOL +/– – Press to adjust the volume.
3
AUDIO
Press to switch the audio streams/channels (page 30).
4
SUBTITLE
Press to switch the subtitles (page 29).
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Number buttons – Use these to select and play the title/
chapter/track you want to view or listen to and to select items
from menus.
19 PLAY MODE
Press to display/hide the Play Mode screen (page 31).
01
20 POP UP MENU/MENU
Press to display the BD-ROM or DVD-Video menus.
CLEAR – Press to clear the numeric number, etc.
ENTER – Press to execute the selected item or enter a setting
that has been changed, etc.
21 DISPLAY
Press to display disc information (page 30).
6
7
SECONDARY AUDIO – When playing a BD-ROM on which
secondary audio is recorded, press to switch to the secondary
audio (page 30).
SECONDARY VIDEO – When playing a BD-ROM on which
secondary video (Picture-in-Picture) is recorded, press to switch
to the secondary video (page 30).
22
TOOLS
Press to display/hide the TOOLS menu (page 24).
23
RETURN
Press to return to the previous screen.
VIDEO SELECT
Press to switch the video output signal to be viewed between the one
output from the HDMI OUT (MAIN) terminal, the HDMI OUT (SUB)
terminal and an analog output terminal (COMPONENT VIDEO, S-
VIDEO or VIDEO output terminals) (page 25).
8
HOME MEDIA GALLERY
Press to display/hide the Home Media Gallery screen (page 35).
9
TOP MENU
Press to display the top menu of the BD-ROM or DVD-Video.
10 /// – Use to select items, change settings and move
the cursor.
ENTER – Press to execute the selected item or enter a setting
that has been changed, etc.
11
HOME MENU
Press to display/hide the Home Menu.
12 PLAY – Press to start playback.
PAUSE – Press to pause playback. Press again to restart
playback.
STOP – Press to stop playback.
PREV/ NEXT – Press to skip to the beginning of the
previous/next title/chapter/track/file (page 28).
// – Press during playback to start reverse scanning.
While playback is paused, press for step reverse playback. Press
and hold while playback is paused for reverse slow motion
playback (pages 27 and 28).
// – Press during playback to start forward scanning.
While playback is paused, press for step forward playback.
Press and hold while playback is paused for forward slow
motion playback (pages 27 and 28).
13 RED/GREEN/BLUE/YELLOW
Use these to navigate BD-ROM menus.
14 VIDEO ADJUST
Press to display/hide the Video Adjust menu (page 40).
15 OPEN/CLOSE
Press to open and close the disc tray.
16 FL DIMMER
Press to switch the brightness of the front panel display. The FL OFF
indicator lights when Off is selected.
17 ANGLE
Press to switch the BD-ROM or DVD-Video camera angles
(page 29).
18 OUTPUT RESOLUTION
Use these to switch the output video resolution from the HDMI OUT
or COMPONENT VIDEO output terminals (page 25).
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
01
2
3
4
5
1
6
11 10
9
8
7
1
STANDBY/ON
6
Press to turn the power on and off.
Press to start playback.
2
PURE AUDIO – High quality audio signals with any extraneous
noise eliminated are output (page 53).
7 HDMI indicator
This lights when an HDMI-compatible device is connected to an
RESOLUTION – Press to switch the output video resolution from
HDMI OUT or COMPONENT VIDEO output terminals (page 25).
HDMI OUT (MAIN) or HDMI OUT (SUB) terminal (page 15).
8
FL OFF indicator
3
4
Front panel display
This lights when Off is selected with FL DIMMER.
Remote control sensor
9
Disc tray
Point the remote control to this, then operate it within approximately
23 feet.
10 HD indicator
This lights when an HDMI cable is connected and video signals are
being output with a resolution of 1080/24p, 1080/60i, 1080/60p or
720/60p. It also lights when a component video cable is connected
and video signals are being output with a resolution of 1080/60i or
720/60p.
The player may have trouble capturing remote control signals if
there is a fluorescent light nearby. If this happens, move the player
away from the fluorescent light.
5
OPEN/CLOSE – Press to open and close the disc tray.
/ – Press to skip to the beginning of the previous title/
chapter/track/file. Press and hold to start reverse scanning
(pages 27 and 28).
11 PURE AUDIO indicator
This lights when PURE AUDIO is set to Mode 1 or Mode 2
(page 53).
/ – Press to skip to the beginning of the next title/
chapter/track/file. Press and hold to start forward scanning
(pages 27 and 28).
– Press during playback to pause. Press again to restart
playback.
– Press to stop playback.
Front Panel Display
1
2
3
4
LAN
PQLS
24HZ
HDMI 1 2
CONTROL 50HZ
60HZ
8
7
6
5
1
5
Character display
Lights during playback.
Displays the title/chapter/track number, elapsed time, etc.
2
6
24HZ/50HZ/60HZ
Lights when playback is paused.
The frequency of the video frame or field being output lights.
3
LAN
7
CONTROL
Lights when there is an active local area network (LAN) connection
(page 20).
Lights when the KURO LINK function is activated (page 16).
8
HDMI 1 2
4
PQLS
HDMI 1 lights when VIDEO SELECT is pressed and the HDMI OUT
(MAIN) terminal is selected. HDMI 2 lights when the HDMI OUT
(SUB) terminal is selected (page 25).
Lights when the PQLS function is activated (page 16).
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
01
1
2
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
L
L
L
R
R
R
AC IN
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
8
7
6
5
4
3
1
AUDIO OUT (7.1 ch) terminals
6
DIGITAL OUT (COAXIAL/OPTICAL) terminals
Connect with the multi-channel (7.1- or 5.1-channel) audio input
terminals on an AV receiver or amplifier, etc. (page 19).
To connect to the 2-channel audio input terminals on a TV, etc.,
connect to FRONT (L/R).
Connect with the digital audio input terminal on an AV receiver or
amplifier, etc. (page 19).
7
LAN (100) terminal
Ethernet port for 100BASE-TX (100 Mbps) network connection
(page 20).
2
AC IN
Connect the power cord here.
8
CONTROL IN terminal
3
VIDEO OUT terminals
VIDEO – Connect with the video input terminal on a TV, AV
receiver or amplifier, etc. (page 18).
Use to control this player from the remote sensor of another Pioneer
component with a CONTROL OUT terminal and bearing the
mark. Connect the CONTROL OUT terminal of the other component
to CONTROL IN on this player using a mini-plug cord (commercially
available).
S-VIDEO – Connect with the S-Video input terminal on a TV, AV
receiver or amplifier, etc. (page 18).
COMPONENT VIDEO (BNC jacks) – Connect with the
component video input terminals on a TV, AV receiver or
amplifier, etc. (page 18).
Caution
• Be sure to connect cables for outputting the audio and video
signals.
4
RS-232C terminal
This terminal is not used.
• When connected via System Control, point the remote control
toward the connected component (such as an AV receiver or
amplifier). The remote will not work correctly when pointed at
this player.
5
HDMI OUT terminals
MAIN (KURO LINK) – Connect with an HDMI-compatible TV, AV
receiver or amplifier, etc. (page 16).
• You cannot use System Control with components that do not
have a System Control terminal or with components
manufactured by companies other than Pioneer.
SUB – Connect with an HDMI-compatible TV, projector, etc.
(page 16). This terminal outputs linear PCM 2-channel audio
signals. Do not connect an AV receiver or amplifier to this
terminal. Also note that the KURO LINK function will not work
for devices connected to this terminal (page 16).
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
02
Connecting up
Be sure to turn off the power and unplug the power cord from the
power outlet whenever making or changing connections.
After connecting, make the settings at the Setup Navigator menu
according to the type of cable connected (page 21).
“x.v.Color” and
are trademarks of Sony Corporation.
Also refer to the operating instructions of the device being
connected.
Audio signals that can be transferred with
the player’s HDMI OUT (MAIN) terminal
• Dolby TrueHD
Connecting using an HDMI
cable
• Dolby Digital Plus
• Dolby Digital
The audio and video signals can be transferred to HDMI-compatible
devices as digital signals with no loss of sound or video quality.
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
• MPEG-2 AAC
Note
• Make the settings at the Setup Navigator menu according to
connected HDMI-compatible device (page 21).
• Linear PCM
Linear PCM audio signals meeting the following conditions can
be output:
• The HDMI indicator on the player’s front panel lights when an
HDMI-compatible device is connected to an HDMI OUT (MAIN)
or HDMI OUT (SUB) terminal (page 13).
– Sampling frequency: 32 kHz to 192 kHz
– Number of channels: Up to 8 (up to 6 for a 192 kHz sampling
frequency)
• 1080p video signals may not be output, depending on the HDMI
cable being used.
For details, see About the audio output settings on page 54.
About HDMI
About the HDMI High Speed Transmission
This player outputs 1080/60p and Deep Color video signals. If your
TV supports 1080/60p or Deep Color signals, use a High Speed
HDMI™ cable in order to take advantage of the maximum
performance the player and TV can offer. Also set HDMI High
Speed Transmission to On. HDMI High Speed Transmission can
be set separately for the HDMI OUT (MAIN) and HDMI OUT (SUB)
terminals (page 45).
This player incorporates High-Definition Multimedia Interface
(HDMI™) technology.
High Speed HDMI™ cables are tested to carry signals up to 1080p.
1080/24p, 1080/60i, 1080/60p and 720/60p video signals that are
capable of Deep Color can also be carried.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
The player supports Deep Color.
Note
The conventional players can transmit a video signal with 8 bit color
depth in the YCbCr 4:4:4 or RGB formats, the players supporting
Deep Color can transmit a video signal with a color bit depth of
greater than 8 bits per color component. Subtle color gradations
can be reproduced when connected to a TV that supports Deep
Color.
• Set HDMI High Speed Transmission to Off when using an
HDMI cable other than a High Speed HDMI™ cable (a Standard
HDMI™ cable).
• The following restrictions apply when HDMI High Speed
Transmission is set to Off:
– Deep Color signals are not output.
This product is compatible with “x.v.Color” that have the capability
to realize a wide-gamut color space based on the xvYCC
specifications.
Playing video signals conforming to “xvYCC” standards on this
player when connected to an “x.v.Color”-compatible TV, etc.,
expands color reproduction capabilities, allowing natural colors to
be reproduced more faithfully than ever.
“x.v.Color” is a promotion name given to the products that have the
capability to realize a wide-gamut color space based on the
international standard specifications defined as xvYCC.
– If the output video resolution is set to Auto, the signals are
output with a resolution of 1080/60i when TV’s preferred
resolution is 1080/60p.
– If the output video resolution is set to 480i or 480p when HDMI
High Speed Transmission is set to Off for the HDMI OUT
(MAIN) terminal, the Dolby TrueHD and DTS-HD Master
Audio audio signals are output as DTS Digital Surround or
linear PCM signals. 96 kHz or 192 kHz multi-channel audio
signals are output as linear PCM 2-channel audio signals
(page 54).
• When an HDMI cable with a built-in equalizer is connected, it
may not operate properly.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• The PQLS function is only activated when a Pioneer AV receiver
or amplifier compatible with the PQLS function is connected
directly to the player’s HDMI OUT (MAIN) terminal using an
HDMI cable.
When connected to a DVI device
02
• It is not possible to connect DVI devices (computer displays,
for example) that are not compatible with HDCP. HDCP is a
specification to protect audiovisual content across the DVI/
HDMI interface.
• The PQLS function is only activated when playing an audio CD
(CD-DA).
• No audio signals are output. Connect using an audio cable, etc.
• The PQLS function is activated when the player is set as follows
(page 45):
KURO LINK: On
PQLS: Auto
• This player is designed for connection with HDMI-compatible
devices. When connected to a DVI device, it may not operate
properly depending on the DVI device.
• Also refer to the operating instructions of AV receiver or
amplifier.
About KURO LINK function
When the player is connected to a Pioneer Flat Panel TV or AV
system (AV receiver or amplifier, etc.) supporting the KURO LINK
function, it can be operated from the Flat Panel TV.
Caution
• If the output video resolution is switched when playing an audio
CD (CD-DA), the PQLS function does not work. This function will
work again after playback stops and restarts.
The input switches automatically on the Flat Panel TV and AV
system (AV receiver or amplifier, etc.) when playback is started on
the player or the Home Menu or the Home Media Gallery is
displayed. When the input is switched, the playback picture, the
Home Menu or the Home Media Gallery appears on the Flat Panel
TV (Auto-select function). If the Flat Panel TV’s power is being turned
off at this time, it may turn on automatically (Simultaneous power
function). When the language information from a connected Flat
Panel TV is received, you can have the player’s on-screen display
language change automatically to that of the Flat Panel TV (Unified
language function). This function is available only when playback is
stopped and the menu screen is not displayed.
Connecting a TV
Connect a TV to the HDMI OUT (MAIN) terminal. Another TV or a
projector can be connected to HDMI OUT (SUB). See Connecting an
AV receiver or amplifier on page 17 to connect an AV receiver or
amplifier using an HDMI cable.
Caution
• Hold the plug when connecting and disconnecting the cable.
Also refer to the operating instructions of the Flat Panel TV and AV
system (AV receiver or amplifier, etc.).
• Placing a load on the plug could result in faulty contact and no
video signals being output.
• The KURO LINK function will not work if connected to the HDMI
OUT (SUB) terminal. To use the KURO LINK function, connect
the TV to the HDMI OUT (MAIN) terminal.
Caution
• To use the KURO LINK function, connect the Flat Panel TV and
AV system (AV receiver or amplifier, etc.) to the HDMI OUT
(MAIN) terminal. The KURO LINK function will not work if
connected to the HDMI OUT (SUB) terminal.
Player’s rear panel
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO
S-VIDEO
To use the KURO LINK function
RS-232
C
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
• The KURO LINK function operates when KURO LINK is set to On
for all devices connected to the HDMI OUT (MAIN) terminal.
Once connections and the settings of all the devices are
finished, be sure to check that the player’s picture is output to
the Flat Panel TV. (Also check after changing the connected
devices and reconnecting HDMI cables.) The KURO LINK
function may not operate properly if the player’s picture is not
properly output to the Flat Panel TV.
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
HDMI OUT
PR
MAIN(KURO LINK)
SUB
• Use High Speed HDMI™ cables when using the KURO LINK
function. The KURO LINK function may not operate properly if
other HDMI cables are used.
It is also possible to
connect to an AV
receiver or amplifier
using an HDMI cable
(page 17).
Match the direction of
the plug to the terminal
and insert straight.
• For some models, the KURO LINK function may be referred to as
“HDMI Control”.
About PQLS function
To HDMI input terminal
The PQLS (Precision Quartz Lock System) is a transfer control
technology using the KURO LINK function. The player’s output
signals are controlled from the AV receiver or amplifier to achieve
high quality sound playback using the quartz oscillator of AV
receiver or amplifier. This eliminates the influence of the jitter
generated upon transfer which can adversely affect the sound
quality.
Direction of
signal flow
TV
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an AV receiver or
amplifier
02
Note
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 54).
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
• See Stretching widescreen pictures vertically (Anamorphic Zoom)
on page 52 for instructions on viewing 2.35:1 movies with a front
projector equipped with an anamorphic lens.
Achieving better sound quality
When connecting one TV (or projector) and AV amplifier to the
player, connect in such a way that the video and audio signals are
transferred separately in order to achieve higher quality sound.
Caution
• Hold the plug when connecting and disconnecting the cable.
• Placing a load on the plug could result in faulty contact and no
video signals being output.
Note
• To use the KURO LINK function, connect the AV receiver or
amplifier to the HDMI OUT (MAIN) terminal. The KURO LINK
function will not work if connected to the HDMI OUT (SUB)
terminal.
• Using the Pure Audio function provides high quality sound with
extraneous noise eliminated (page 53).
Player’s rear panel
• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel
audio signals. Be sure to connect the AV receiver or amplifier to
the HDMI OUT (MAIN) terminal.
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
Player’s rear panel
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
PR
MAIN(KURO LINK)
SUB
HDMI OUT
Match the direction of
the plug to the terminal
and insert straight.
PR
MAIN(KURO LINK)
SUB
Direction of
signal flow
To HDMI input
terminal
To HDMI input
terminal
Match the direction of
the plug to the terminal
and insert straight.
AV receiver
or amplifier
To HDMI input
terminal
AV receiver
or amplifier
To HDMI input terminal
TV or
projector
Do not connect using
an HDMI cable.
Projector
From HDMI output terminal
To HDMI input terminal
Direction of
signal flow
TV
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a TV using a video
cable and an audio cable
Connecting video and
audio cables
02
Caution
Note
• Connect the player’s video output directly to your TV.
This player supports analog copy protection technology.
Therefore the picture may not be displayed properly if connected
to a TV via a DVD recorder/video deck or when playing the
player’s output material that is recorded by a DVD recorder/
video deck. Furthermore, the picture may not be displayed
properly due to the copy protection when the player is connected
to a TV with a built-in video deck. For details, contact the
manufacturer of your TV.
• Make the settings in the Setup Navigator menu according to
the type of cable connected (page 21).
• To output video signals from this player, connect using one of
the following (not including when connected using an HDMI
cable): a component video cable, an S-Video cable or a video
cable.
Connecting a TV using a component
video cable and an audio cable
Player’s rear panel
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
Player’s rear panel
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
LAN(100)
DIGITAL OUT
CONT
COMPONENT VIDEO
HDMI OUT
FRONT
SU
VIDEO OUT
L
R
VIDEO
OPTICAL
COAXIAL
S-VIDEO
PR
PB
Y
MAIN(KURO LINK)
SUB
RS-232 C
FRONT
SU
COMPONENT VIDEO
L
R
VIDEO OUT
VIDEO
S-VIDEO
RS-232 C
PR
PB
Y
LAN(100)
DIGITAL OUT
COMPONENT VIDEO
OPTICAL
COAXIAL
LAN(100)
DIGITAL OUT
PR
PB
Y
OPTICAL
COAXIAL
It is also possible to
connect to an AV
Use the BNC-RCA
adapter (included)
to connect an RCA
pin type cable.
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels)
or a digital audio cable
(page 19).
Component cable or
three video cables
(commercially
available)
To video
To S-Video
input
terminal
input
To audio input
terminal
terminal
To component
It is also possible to
connect to an AV
receiver or amplifier.
Connect the audio
signals using audio
cables (7.1 channels)
or a digital audio cable
(page 19).
To audio input
terminals
video input
terminals
Direction of
signal flow
TV
Direction of
signal flow
Note
TV
• Video signals are output with a resolution of 480/60i when
connected using a video cable or an S-Video cable.
Note
• When connected to the TV using a component video cable, video
signals are not output with a resolution of 1080/24p or 1080/60p.
• Depending on the output video resolution setting, the picture
may not be output (page 25).
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an AV receiver or
amplifier using audio cables
Connecting an AV receiver or
amplifier using a digital audio cable
02
When connecting to a 7.1-channel compatible AV receiver or
amplifier – Connect using 4 audio cables (diagram below).
Connect either an optical digital audio cable or a coaxial digital
audio cable.
When connecting to a 5.1-channel compatible AV receiver or
amplifier – Connect using 3 audio cables (do not connect to the
surround back left and right terminals).
Player’s rear panel
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
• After connecting, set Audio Output Mode to Multi-channel
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
(page 45).
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
Player’s rear panel
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO OUT
VIDEO
S-VIDEO
VIDEO
RS-232
C
S-VIDEO
RS-232 C
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
COMPONENT VIDEO
LAN(100)
DIGITAL OUT
AUDIO OUT ( 7.1 ch )
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
L
L
L
R
R
R
PR
PB
Y
OPTICAL
COAXIAL
B
VIDEO OUT
VIDEO
S-VIDEO
RS-232 C
Use the BNC-RCA
adapter (included)
to connect an RCA
pin type cable.
LAN(100)
DIGITAL OUT
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
To component video input
terminals
Direction of
signal flow
AV receiver or amplifier
To multi-channel
audio input
To component video input
terminals
Note
terminals
• Dolby TrueHD signals are output as Dolby Digital signals or
signals converted from Dolby TrueHD to linear PCM (page 54).
Direction of
signal flow
• Dolby Digital Plus signals are output as Dolby Digital signals or
signals converted from Dolby Digital to linear PCM (page 54).
AV receiver or amplifier
• DTS-HD Master Audio and DTS-HD High Resolution Audio
signals are output as the DTS Digital Surround signals or
signals converted from DTS Digital Surround to linear PCM
(page 54).
Note
• For DTS-HD Master Audio and DTS-HD High Resolution Audio
signals, the DTS Digital Surround signals are converted to linear
PCM for output (page 54).
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Network connection
Connecting the power
cord
02
The player’s software can be updated over the Internet (page 52).
Connect an Ethernet hub (or a router with hub functionality) that is
connected to the Internet to the player.
Connect the power cord after all the connections between devices
have been completed.
Be sure to use a 100BASE-TX compatible Ethernet hub or router.
Player’s rear panel
Connecting via an Ethernet hub
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
AC IN
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
If you already operate one or more PCs on a local area network, you
can integrate this player by connecting it to the Ethernet hub using
a LAN cable.
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
Player’s rear panel
AUDIO OUT
(
7.1 ch
)
FRONT
SUB WOOFER
CENTER
SURROUND
SURROUND
BACK
R
L
R
L
R
L
URROUND
BACK
AC IN
L
VIDEO OUT
VIDEO
S-VIDEO
RS-232
C
LAN(100)
DIGITAL OUT
CONTROL
IN
COMPONENT VIDEO
HDMI OUT
OPTICAL
COAXIAL
PR
PB
Y
MAIN(KURO LINK)
SUB
AC IN
OUT
VIDEO
LAN(100)
DIGITAL OUT
CONTROL
IN
OPTICAL
COAXIAL
Power cord (included)
LAN cable (included)
3
1
WAN
Ethernet hub
(router with hub functionality)
LAN
To wall outlet
Internet
Modem
LAN(10/100)
PC
Note
• If there is an available DHCP server in your local area network,
the IP address is obtained automatically. Otherwise, set IP
address manually (page 50).
• For some Internet service providers, you may have to set the
individual network configuration manually. In this case, see
page 50.
• Pioneer is not responsible for any malfunction of the player due
to communication error/ malfunctions associated with your
network connection and/or your connected equipment. Please
contact your Internet service provider or network device
manufacturer.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
03
Getting Started
When a Pioneer Flat Panel TV that is compatible with KURO LINK is
connected to this player’s HDMI OUT (MAIN) terminal, language
settings are imported from the Pioneer Flat Panel TV’s language
settings before Setup Navigator begins.
Making settings using the
Setup Navigator menu
4
Select and set the video and audio output terminals.
Be sure to perform these settings when using the player for the first
time.
Select the actually connected video and audio output terminals.
Use /// to select, then press ENTER.
TOOLS
TOP MENU
Caution
• Before turning on the power, check that the connections
between the player and other devices are correct. Also, turn on
the power of the devices connected to the player before turning
on the player’s power.
ENTER
HOME
MENU
RETURN
1
Turn on the TV’s power and switch the input.
See the TV’s operating instructions for instructions on operating the
TV.
Setup Navigator
BD PLAYER
If TV Control is set, the TV can be operated with the player’s remote
control (page 23).
Select the output terminals to be used for
the video and audio signals of this player.
2
Turn on the player’s power.
Video
HDMI MAIN
Press STANDBY/ON.
Audio
HDMI MAIN
STANDBY/ON
OPEN/CLOSE
Use [
press [
][
][
] to select video or audio, then
] to select the output terminal.
TV CONTROL
INPUT
SELECT
CH
VOL
Setting item
HDMI MAIN
Output terminal name
HDMI OUT (MAIN)
HDMI OUT (SUB)
Check that the Setup Navigator menu is displayed.
If the Setup Navigator menu is not
HDMI SUB
displayed
COMPONENT/S/
VIDEO
VIDEO OUT
COMPONENT VIDEO
S-VIDEO
VIDEO
Press
HOME MENU to display the Home Menu, select
Initial Setup Setup Navigator Start, then press ENTER.
HDMI MAIN
HDMI OUT (MAIN)
DIGITAL OUT COAXIAL
OPTICAL
AUDIO OUT (7.1 ch)
3
Select the OSD language.
DIGITAL AUDIO
Use / to select, then press ENTER.
TOOLS
TOP MENU
ANALOG AUDIO
Caution
ENTER
HOME
MENU
• The video and audio signals output from the set output terminals
are output synchronously (lip synchronization).
RETURN
• When HDMI MAIN or DIGITAL AUDIO is selected at Audio,
linear PCM audio signals (2 channels) are output from all
terminals other than the ones selected at Audio.
Setup Navigator
BD PLAYER
Please select the on-screen display language.
• When ANALOG AUDIO is selected at Audio, no audio signals
are output from the HDMI OUT or DIGITAL OUT terminals.
• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel
audio signals. HDMI SUB cannot be selected for Audio. To
listen to the device connected to the HDMI OUT (SUB) terminal,
select HDMI MAIN.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
For steps 5 to 8, the step to which you should proceed depends
on the combination of the Video and Audio settings.
7
Select the output video resolution from the COMPONENT
03
VIDEO output terminals.
Use / to select, then press ENTER.
5
Select and set the HDMI High Speed Transmission setting
for the HDMI OUT (MAIN) terminal.
Use / to select, then press ENTER.
Setup Navigator
BD PLAYER
Select the output video resolution at the
TOOLS
TOP MENU
Component video terminal.
ENTER
HOME
MENU
RETURN
If you select [Source Direct], the output
resolution is determined according to the
video format of the playing source.
Setup Navigator
BD PLAYER
For details on the resolution settings, see Switching the output video
resolution on page 25.
Select the HDMI High Speed Transmission setting for HDMI MAIN.
8
Select the aspect ratio of your TV.
Use / to select, then press ENTER.
Off
On
Setup Navigator
BD PLAYER
Normally select [On] (Recommended).
Select [Off] if the video or audio of HDMI-connected
was not output in the test output.
Select the screen aspect ratio to match
your TV.
When HDMI High Speed Transmission for the HDMI OUT (MAIN)
terminal is set to On, use a High Speed HDMI™ cable. The picture
and sound may not be output properly if any other HDMI cable (for
example a standard HDMI™ cable) or an HDMI cable with built-in
equalizer is used.
6
Select and set the HDMI High Speed Transmission setting
9
Check the settings.
for the HDMI OUT (SUB) terminal.
Use / to select, then press ENTER.
Select Proceed, then press ENTER.
TOOLS
TOP MENU
Setup Navigator
BD PLAYER
Select [Proceed] if you want to start testing
your audio and video settings.
ENTER
HOME
MENU
Proceed
RETURN
Setup Navigator
BD PLAYER
Select the HDMI High Speed Transmission setting for HDMI SUB.
10 Output test tones.
Use / to select Yes, then press ENTER.
Off
On
Setup Navigator
BD PLAYER
Normally select [On] (Recommended).
Select [Off] if the video or audio of HDMI-connected
was not output in the test output.
The test tone will be output.
Reduce the volume to an appropriate level.
When HDMI High Speed Transmission for the HDMI OUT (SUB)
terminal is set to On, use a High Speed HDMI™ cable. The picture
and sound may not be output properly if any other HDMI cable (for
example a standard HDMI™ cable) or an HDMI cable with built-in
equalizer is used.
Yes
No
The video and/or audio may not be output under certain setup.
The setup menu comes back in 30 seconds.
Caution
• The screen in step 11 and test tones are output simultaneously
according to the settings in steps 4 to 8. Lower the volume of the
devices connected with the player.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Finish the Setup Navigator menu.
Use / to select Finish, then press ENTER.
2
Check that the TV can be operated.
03
STANDBY/ON
OPEN/CLOSE
Setup Navigator
BD PLAYER
TV CONTROL
Setup is complete!
INPUT
SELECT
CH
VOL
Finish
Go Back
TV Preset code list
The setup menu comes back in 30 seconds.
Manufacturer Code(s)
PIONEER 00, 31, 32, 07, 36, 42, 51
ACURA 44
ADMIRAL 31
AIWA 60
AKAI 32, 35, 42
AKURA 41
ALBA 07, 39, 41, 44
AMSTRAD 42, 44, 47
ANITECH 44
ASA 45
ASUKA 41
GENEXXA 31, 41
GOLDSTAR 10, 23, 21, 02, 07, 50
GOODMANS 07, 39, 47, 48, 56
GORENJE 38
GPM 41
GRAETZ 31, 42
GRANADA 07, 35, 42, 43, 48
GRADIENTE 30, 57
GRANDIN 18
GRUNDIG 31, 53
HANSEATIC 07, 42
HCM 18, 44
HINARI 07, 41, 44
HISAWA 18
HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10,
24, 25, 18
To redo the settings from the start, select Go Back.
Depending on the output terminal setting of step 4 or the HDMI
cable being used, it may happen that no picture and/or sound is
output. If this happens, the setup returns to step 4 if there is no
operation for over 30 seconds. Once the setup returns to step 4, redo
the settings according to the connected devices and the HDMI
cable being used.
AUDIOGONIC 07, 36
BASIC LINE 41, 44
BAUR 31, 07, 42
BEKO 38
Operating the TV with the
player’s remote control
BEON 07
BLAUPUNKT 31
BLUE SKY 41
BLUE STAR 18
BPL 18
BRANDT 36
BTC 41
HUANYU 56
HYPSON 07, 18, 46
ICE 46, 47
IMPERIAL 38, 42
INDIANA 07
INGELEN 31
When the manufacturer code for your brand of TV is set on the
player’s remote control, the TV can be operated using the player’s
remote control.
BUSH 07, 41, 42, 44, 47, 56
CASCADE 44
CATHAY 07
INTERFUNK 31, 32, 07, 42
INTERVISION 46, 49
ISUKAI 41
Caution
CENTURION 07
CGB 42
CIMLINE 44
CLARIVOX 07
CLATRONIC 38
CONDOR 38
ITC 42
ITT 31, 32, 42
JEC 05
JVC 13, 23
KAISUI 18, 41, 44
KAPSCH 31
KENDO 42
• For some models it may not be possible to operate the TV with
the player’s remote control, even for TVs of brands listed on the
manufacturer code list.
• The setting may be restored to the default after the batteries are
replaced. If this happens, reset it.
CONTEC 44
CROSLEY 32
CROWN 38, 44
CRYSTAL 42
CYBERTRON 41
DAEWOO 07, 44, 56
DAINICHI 41
KENNEDY 32, 42
KORPEL 07
KOYODA 44
LEYCO 07, 40, 46, 48
LIESENK&TTER 07
LOEWE 07
1
Input the 2-digit manufacturer code.
Press the number buttons (0 to 9) to input the code while pressing
TV CONTROL .
STANDBY/ON
OPEN/CLOSE
DANSAI 07
DAYTON 44
DECCA 07, 48
DIXI 07, 44
DUMONT 53
ELIN 07
ELITE 41
ELTA 44
LUXOR 32, 42, 43
M-ELECTRONIC 31, 44, 45, 54, 56, 07,
36, 51
MAGNADYNE 32, 49
MAGNAFON 49
MAGNAVOX 07, 10, 03, 12, 29
MANESTH 39, 46
MARANTZ 07
TV CONTROL
INPUT
SELECT
CH
VOL
FL DIMMER
AUDIO SUBTITLE ANGLE
EMERSON 42
ERRES 07
MARK 07
MATSUI 07, 39, 40, 42, 44, 47, 48
MCMICHAEL 34
MEDIATOR 07
MEMOREX 44
METZ 31
MINERVA 31, 53
MITSUBISHI 09, 10, 02, 21, 31
MULTITECH 44, 49
NEC 59
NECKERMANN 31, 07
NEI 07, 42
FERGUSON 07, 36, 51
FINLANDIA 35, 43, 54
FINLUX 32, 07, 45, 48, 53, 54
FIRSTLINE 40, 44
FISHER 32, 35, 38, 45
FORMENTI 32, 07, 42
FRONTECH 31, 42, 46
FRONTECH/PROTECH 32
FUJITSU 48
CLEAR
AUDIO
ENTER
OUTPUT
RESOLUTION
VIDEO
Note
FUNAI 40, 46, 58
GBC 32, 42
• The factory setting is PIONEER 00.
NIKKAI 05, 07, 41, 46, 48
GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18 NOBLIKO 49
• If you make a mistake when inputting the code, release TV
CONTROL then start over from the beginning.
GEC 07, 34, 48
GELOSO 32, 44
GENERAL 29
NOKIA 32, 42, 52
NORDMENDE 32, 36, 51, 52
• When there are multiple codes for a manufacturer, try inputting
them in the indicated order until the TV can be operated.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select and set the item.
OCEANIC 31, 32, 42
ORION 32, 07, 39, 40
OSAKI 41, 46, 48
SIAREM 32, 49
SIEMENS 31
SINUDYNE 32, 39, 40, 49
SKANTIC 43
03
Use / to select, then press ENTER.
TOOLS
TOP MENU
OSO 41
OSUME 48
SOLAVOX 31
OTTO VERSAND 31, 32, 07, 42
PALLADIUM 38
PANAMA 46
PANASONIC 31, 07, 08, 42, 22
PATHO CINEMA 42
PAUSA 44
SONOKO 07, 44
SONOLOR 31, 35
SONTEC 07
ENTER
HOME
MENU
SONY 04
RETURN
SOUNDWAVE 07
STANDARD 41, 44
STERN 31
PHILCO 32, 42
PHILIPS 31, 07, 34, 56, 68
PHOENIX 32
SUSUMU 41
SYSLINE 07
Note
PHONOLA 07
PROFEX 42, 44
PROTECH 07, 42, 44, 46, 49
QUELLE 31, 32, 07, 42, 45, 53
R-LINE 07
RADIOLA 07
RADIOSHACK 10, 23, 21, 02
RBM 53
RCA 01, 10, 15, 16, 17, 18, 61, 62, 09
REDIFFUSION 32, 42
REX 31, 46
TANDY 31, 41, 48
TASHIKO 34
TATUNG 07, 48
TEC 42
TELEAVIA 36
TELEFUNKEN 36, 37, 52
TELETECH 44
• Items that cannot be changed are displayed in gray. The items
that can be selected depend on the player’s status.
To change the setting of the selected item
Use / to change.
TENSAI 40, 41
To close the TOOLS menu
THOMSON 36, 51, 52, 63
THORN 31, 07, 42, 45, 48
TOMASHI 18
Press
TOOLS or
RETURN.
ROADSTAR 41, 44, 46
SABA 31, 36, 42, 51
SAISHO 39, 44, 46
SALORA 31, 32, 42, 43
SAMBERS 49
SAMSUNG 07, 38, 44, 46, 69, 70
SANYO 35, 45, 48, 21, 14, 91
SBR 07, 34
SCHAUB LORENZ 42
SCHNEIDER 07, 41, 47
SEG 42, 46
SEI 32, 40, 49
SELECO 31, 42
TOSHIBA 05, 02, 26, 21, 53
TOWADA 42
ULTRAVOX 32, 42, 49
UNIDEN 92
UNIVERSUM 31, 07, 38, 42, 45, 46, 54
VESTEL 07
VICTOR 13
VOXSON 31
WALTHAM 43
WATSON 07
TOOLS menu item list
Item
Description
Play from Beginning
Play the selected title, track or file from the
start.
Slideshow
Play a slideshow of the image files on the
selected disc or folder.
Play Mode
Display the Play Mode screen (page 31).
WATT RADIO 32, 42, 49
WHITE WESTINGHOUSE 07
YOKO 07, 42, 46
ZENITH 03, 20
Video Adjust
Display the picture quality adjustment screen
(page 40).
SHARP 02, 19, 27, 67, 90
Secondary Video
Switch the BD-ROM’s secondary video
(Picture-in-Picture) (page 30).
Subtitle
Angle
Switch the subtitles (page 29).
Using the TOOLS menu
Switch the BD-ROM/DVD-Video disc’s camera
angles (page 29).
Various functions can be called out according to the player’s
operating status.
Rotate
Rotate the image while playing a slideshow
(page 37).
1
Display the TOOLS menu.
Anamorphic Zoom
Use to view 2.35:1 movies with a front projector
equipped with an anamorphic lens (page 52).
Press TOOLS.
Audio Adjust
Audio
Display the audio adjustment menu (page 41).
Switch the audio streams/channels (page 30).
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Secondary Audio
Switch the BD-ROM’s secondary audio
streams/channels (page 30).
Now Playing
Display the playback screen of the currently
playing track or file.
ENTER
Original/Play List
Switch the DVD-R/-RW’s (VR format) list
screen between the original list and the
playlist.
Add to HMG Playlist
Add the selected track or file to the HMG
Playlist (page 38).
Delete from HMG Playlist Delete the selected track or file from the HMG
Playlist (page 39).
BD PLAYER
TOOLS
Angle
Audio
Subtitle
Audio Adjust
Video Adjust
Output Video Resolution Switch the output video resolution from the
various output terminals (page 25).
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• The output video resolution depends on the video output
terminal. (page 26)
Switchingthevideooutput
terminal to be viewed
03
Video resolution of the
currently playing disc
Example:
Auto
Source : 1080/60i
Output Video Resolution
Use the procedure below to switch the video output signal to be
viewed between the one output from the HDMI OUT (MAIN) terminal,
the HDMI OUT (SUB) terminal and an analog output terminal
Current Output : 1080/60i
Output video resolution
from the player
(COMPONENT VIDEO, S-VIDEO or VIDEO output terminals).
The settings below are valid for the selected video output terminal.
• The output video resolution (below)
• The output video resolution setting can also be switched by
pressing RESOLUTION on the player’s front panel.
• The Lip Sync function (page 42)
• The output video resolution setting can also be switched by
selecting Output Video Resolution from the TOOLS menu.
• The Pure Audio function (page 53)
Press VIDEO SELECT.
Caution
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
• On some devices (TV, AV receiver or amplifier, etc.), the video or
audio may not be output properly when the resolution is
switched. If this happens, use OUTPUT RESOLUTION to set a
resolution at which the video and audio are properly output.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
• When video signals are being output with a resolution of 1080/
24p, 1080/60i, 1080/60p or 720/60p from the HDMI OUT
terminals or COMPONENT VIDEO output terminals, the picture
may be output with an aspect ratio of 16:9, even if the TV Aspect
Ratio is set to 4:3 (Standard).
• The current video output terminal is displayed on the TV screen
and on the player’s front panel display.
To switch the video output terminals, press VIDEO SELECT
again or press /.
• The picture may not be displayed for a while when the resolution
is switched.
Example:
Output video resolution setting of
selected video output terminal
About Film material
The film material is a video signal with a frame rate of 24 frames/
second. For example, these materials include 1080/24p, 720/24p,
etc.
Video Output Terminal
HDMI MAIN (Source Direct)
Caution
Video resolution of the
currently playing disc
Example:
• The picture may not be displayed for a while when the video
output terminal is switched.
ꢀ
Auto
ꢁ
Source : 1080/24p
Output Video Resolution
• Depending on the player’s settings, the picture of a TV
connected to a terminal other than the selected video output
terminal may not be properly displayed.
Current Output : 1080/24p
Output video resolution
from the player
• When Pure Audio is set to Mode 2, no picture will be output
from any video output terminal other than the selected one
(page 53).
To output film material
To output 1080/24p film material from HDMI OUT terminals, set the
output video resolution to either Auto, 1080/24p or Source Direct.
Switching the output
video resolution
Caution
• 1080/24p signals can only be output from the HDMI OUT
terminals. They cannot be output from other video terminals.
Use the procedure below to switch the output video resolution from
the various video output terminals.
• When Auto is selected, the picture is output at 60 frames/
second if your TV is not compatible with 1080/24p signals.
• When 1080/24p or Source Direct is selected, the signals are
output as such, even if your TV is not compatible with 1080/24p
signals. If the picture is not displayed properly, use OUTPUT
RESOLUTION to set an output video resolution at which the
video and audio signals are properly output.
Press OUTPUT RESOLUTION.
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
• Even if Auto, 1080/24p or Source Direct is selected, 720/24p
video signals are output at 60 frames/second.
DISPLAY POPUP MENU
MENU
• When 1080/24p is selected, the motion may be unnatural or the
picture may not be clear, depending on the source. In this case,
set the resolution to something other than 1080/24p.
• The current output video resolution setting is displayed on the
TV screen and on the player’s front panel display.
To switch the output video resolution, press OUTPUT
RESOLUTION again or press /.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About the output video resolution
The resolution setting and the resolution of the picture that is actually output differ for the different terminals. See the table below.
03
1
1
Output video
resolution
setting
—
HDMI MAIN, HDMI SUB
COMPONENT/S/VIDEO
HDMI OUT terminals
COMPONENT VIDEO
HDMI OUT terminals
COMPONENT VIDEO
S-VIDEO/
VIDEO output
2
2
output terminals
output terminals
2
terminal
3
Resolution preferred by 480/60i
—
—
480/60i
Auto
4,5
TV
480i
480/60i
480/60p
720/60p
480/60i
480/60p
720/60p
480/60i
480/60p
480p
720p
6
720/60p
6
1080i
1080/60i
1080/60i
1080/60i
3
7
—
—
—
—
1080p
1080/60p
3
5,8,9
1080/24p
1080/24p
Source Direct
Resolution recorded on
Resolution recorded on Resolution recorded on
5,8,10
8,10,11
8,10,11
disc
disc
disc
1. The video output terminal set at Video in the Setup Navigator (page 21) or the video output terminal selected with VIDEO SELECT (page 25).
2. Depending on the BD, the pictures may not be output.
3. This cannot be selected when the video output terminal is set to COMPONENT/S/VIDEO.
4. The pictures are output with the preferred output resolution of the device (TV, AV receiver or amplifier, etc.) connected to the selected video output
terminal. However, if devices are connected to both HDMI MAIN and HDMI SUB, the pictures are output with a resolution which both devices
support. If the devices connected to HDMI MAIN and HDMI SUB support different resolutions, turn off the power of the device not being used so
that the picture is output with the optimum resolution for the device to be viewed.
5. For details on the output of film material (1080/24p or 720/24p video signals), see To output film material on page 25.
6. DVD-Video or DVD VR format may be output at 480/60p. BDs format may be output at 480/60p. At this time, the video signals from the HDMI OUT
terminals are output at the same resolution of 480/60p as the video signals output from the COMPONENT VIDEO terminals.
7. Depending on the connected HDMI cable, the video signals may not be output.
8. Depending on the connected TV, the video signals may not be output.
9. Sources recorded in 480/60p, 720/60p or 720/24p are output at 1080/60i.
10. 720/24p film material is output at 720/60p.
11. 1080/24p film material is output at 1080/60i.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
04
Playback
If the disc menu is displayed
For some discs, the disc menu is displayed automatically when
playback starts. The contents of the disc menu and the way to
operate differ from disc to disc.
Playing discs or files
This section describes the player’s main operations.
For the types of discs that can be played, see Playable discs on
page 8. For the types of files that can be played, see Playable files on
page 10. Video, image and audio files recorded on discs are played
with Home Media Gallery (page 35).
Resuming playback from where it was
stopped (resume playback function)
• When STOP is pressed during playback, the point at which
the disc stopped is stored in the memory. When PLAY is
pressed, playback resumes from that point.
1
Press STANDBY/ON to turn on the power.
Turn the TV’s power on and switch its input beforehand.
• For audio CDs and audio files, playback starts from the
beginning of the track/file that was playing.
STANDBY/ON
OPEN/CLOSE
• If the stop mode was set while playing a slideshow of image files,
playback starts from the image file last displayed.
TV CONTROL
INPUT
SELECT
CH
VOL
• To cancel the resume playback function, press STOP while
playback is stopped.
2
Press OPEN/CLOSE to open the disc tray and load the
disc.
Note
STANDBY/ON
OPEN/CLOSE
• The resume playback function is canceled automatically in the
following cases:
TV CONTROL
– When the disc tray is opened.
INPUT
SELECT
CH
VOL
– When the file list window is switched.
– When the power is turned off. (For BDs and DVDs this does
not cancel the resume playback function.)
Note
• The resume playback function cannot be used for some discs.
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player’s front panel display.
Forward and reverse scanning
BD
Video files
Image files
Audio files
3
Press PLAY to play the disc.
DVD
AVCHD
CD
PLAY
PREV
RED
PAUSE
STOP
NEXT
BLUE
1
During playback, press or .
GREEN YELLOW
To pause, press PAUSE during playback.
PLAY
To stop, press STOP during playback.
PREV
PAUSE
STOP
NEXT
Note
• The scanning speed switches each time the button is pressed.
The speed steps depend on the disc or file (the speed is
displayed on the TV screen).
• Some discs start playing automatically when the disc tray is
closed.
• Forward or reverse scanning is also possible by holding the
button down. Normal playback resumes when the button is
released.
• DVD-Video discs have parental lock features. Input the
password registered in the player’s settings to unlock the
parental lock. For details, see page 49.
• For some BD-R/-RE, playback protection is set for the disc or
titles. Input the code number set for the disc to unlock the
protection.
Note
• No sound is output when scanning BDs, DVDs and video files.
• Sound is output when scanning audio CDs and audio files.
• Check Troubleshooting on page 65 if video or audio signals are
not being output properly.
• For some discs, normal playback resumes automatically when
the chapter switches.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
To resume normal playback
Playing in slow motion
04
Press PLAY.
BD
Video files
Image files
Audio files
DVD
AVCHD
CD
Playing specific titles, chapters or
tracks
While playback is paused, press and hold / or /.
BD
Video files
Image files
Audio files
DVD
AVCHD
CD
PLAY
PREV
PAUSE
STOP
NEXT
Input the number of the title, chapter or track you want to
play.
• Use the number buttons (0 to 9) to input the number, then press
ENTER.
• The speed switches each time the button is pressed (the speed
is displayed on the TV screen). The speed steps depend on the
disc or file.
Note
• It is not possible to switch the speed during reverse slow motion
playback.
• No sound is output during slow motion playback.
CLEAR
ENTER
OUTPUT
RESOLUTION
• For some discs, normal playback resumes automatically when
the chapter switches.
SECONDARY
AUDIO
VIDEO
• Reverse slow motion playback is not possible with video files.
• There are some discs for which slow motion playback is not
possible.
Note
• For some discs, it is not possible to specify and play titles,
chapters or tracks.
To resume normal playback
• Press CLEAR to clear the values you have input.
Press PLAY.
Skipping content
Step forward and step reverse
BD
Video files
Image files
Audio files
DVD
AVCHD
CD
BD
Video files
Image files
Audio files
DVD
AVCHD
CD
Press PREV or NEXT.
While playback is paused, press / or /.
PLAY
PREV
RED
PAUSE
STOP
NEXT
BLUE
PLAY
GREEN YELLOW
PREV
PAUSE
STOP
NEXT
• When NEXT is pressed, the playback skips ahead to the
beginning of the next title/chapter/track/file.
• The picture moves a step forward or reverse each time the
button is pressed.
• When PREV is pressed, the playback skips back to the
beginning of the currently playing title/chapter/track/file. Press
twice to skip back to the beginning of the previous title/chapter/
track/file.
Note
• For some discs, normal playback resumes automatically when
the chapter switches.
Note
• Reverse step playback is not possible with video files.
• There are some discs for which skipping is not possible.
• There are some discs for which step forward/reverse playback is
not possible.
To resume normal playback
Press PLAY.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• The subtitles can also be switched by selecting Subtitle from
the TOOLS menu.
Switching the camera angles
04
For BD-ROM and DVD-Video discs on which multiple angles are
recorded, the angles can be switched during playback.
Note
• In some cases the subtitle may switch or the switching screen
provided on the disc may be displayed immediately, without the
current subtitle or the total number of subtitles recorded on the
disc being displayed.
BD
Video files
Image files
Audio files
DVD
AVCHD
CD
• The types of recorded subtitles depend on the disc and file.
During playback, press ANGLE.
INPUT
SELECT
• If the subtitles are not switched when SUBTITLE is pressed,
switch them from the menu screen.
CH
VOL
FL DIMMER
AUDIO SUBTITLE ANGLE
Turning the subtitles off
Press SUBTITLE, then press CLEAR.
• The current angle and total number of recorded angles are
displayed on the TV screen and on the player’s front panel
display.
About displaying external subtitle files
while playing DivX media files
To switch the angles, press ANGLE again or press /.
In addition to the subtitles recorded in DivX media files, this player
also supports the display of external subtitle files. If a file has the
same name as a DivX media file aside from the file extension and the
extension is one of the extensions listed below, the file is treated as
an external subtitle file. Note that DivX media files and external
subtitle files must be located in the same folder.
Current angle/Total number of
recorded angles
Example:
ꢀ
1/4
ꢁ
Angle
Only one external subtitle file can be displayed on this player. Use a
computer, etc., to delete any external subtitle files you do not want
to display from the disc.
• The angles can also be switched by selecting Angle from the
TOOLS menu.
.srt, .sub, .txt, .smi, .ssa, .ass
Note
If the language code is specified for the external subtitle file, the
subtitles are displayed with the font corresponding to that language
code. If no language code is specified, the subtitles are displayed
with the font corresponding to the language code set at Subtitle
Language (page 46). The same font is used for the all the languages
in each of the groups below.
• For some discs, the angle can also be switched on the menu
screen.
• Angle mark
is displayed for scenes at which multiple
angles are recorded if Angle/Secondary Indicator is set to On
(page 45).
Group 1 Afrikaans(af/afr), Basque(eu/eus), Catalan(ca/cat), Danish(da/dan),
Dutch(nl/nld), English(en/eng), Faroese(fo/fao), Finnish(fi/fin),
French(fr/fra), Galician(gl/glg), German(de/deu), Guarani(gn/grn),
Icelandic(is/isl), Irish(ga/gle), Italian(it/ita), Latin(la/lat),
Norwegian(no/nor), Portuguese(pt/por), Rhaeto-Romance(rm/roh),
Scots-Gaelic(gd/gla), Spanish(es/spa), Swahili(sw/swa), Swedish(sv/
swe), Zulu(zu/zul)
Switching the subtitles
For discs or files on which multiple subtitles are recorded, the
subtitles can be switched during playback.
Group 2 Albanian(sq/sqi), Croatian(hr/hrv), Czech(cs/ces), Hungarian(hu/
BD
Video files
Image files
Audio files
hun), Polish(pl/pol), Romanian(ro/ron), Slovak(sk/slk), Slovenian(sl/
slv)
DVD
AVCHD
CD
Group 3 Belarusian(be/bel), Bulgarian(bg/bul), Macedonian(mk/mkd),
Moldavian(mo/mol), Russian(ru/rus), Serbian(sr/srp), Ukrainian(uk/
ukr)
During playback, press SUBTITLE.
INPUT
SELECT
Group 4 Greek(el/ell)
CH
VOL
Group 5 Estonian(et/est), Kurdish(ku/kur), Turkish(tr/tur)
FL DIMMER
AUDIO SUBTITLE ANGLE
Note
• Depending on the file, the external subtitles may not be
displayed properly.
• The current subtitle and total number of recorded subtitles are
displayed on the TV screen and on the player’s front panel
display.
To switch the subtitle, press SUBTITLE again or press /.
Current subtitle/Total number of
recorded subtitles
Example:
1/2 English
Subtitle
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the audio streams/
channels
Switching the secondary video
04
Use the procedure below to switch the secondary video (Picture-in-
Picture) recorded on the BD-ROM.
For discs or files on which multiple audio streams/channels are
recorded, audio streams/channels can be switched during
playback. Also use this procedure to switch the secondary audio for
BD-ROMs on which secondary audio is recorded.
BD
Video files
Image files
Audio files
DVD
AVCHD
CD
BD
Video files
Image files
Audio files
During playback, press SECONDARY VIDEO.
DVD
AVCHD
CD
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
During playback, press AUDIO.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
FL DIMMER
AUDIO SUBTITLE ANGLE
• The current secondary video stream and total number of
recorded secondary video streams are displayed on the TV
screen and on the player’s front panel display.
To switch the secondary video streams, press SECONDARY
VIDEO again or press /.
Current secondary video stream/Total number
of recorded secondary video streams
Example:
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
ꢀ
Secondary Video
VIDEO SELECT PLAY MODE
1/4
ꢁ
• The current audio stream/channel and total number of recorded
audio streams/channels are displayed on the TV screen and on
the player’s front panel display.
• The secondary video streams can also be switched by selecting
Secondary Video from the TOOLS menu.
To switch the audio streams/channels, press AUDIO again or
press /.
Note
• To switch the secondary audio, press SECONDARY AUDIO.
• In some cases the secondary video may switch or the switching
screen provided on the disc may be displayed immediately,
without the current secondary video or the total number of
secondary video streams recorded on the disc being displayed.
Current audio stream/Total number
of recorded audio streams
Example:
ꢀ
Audio
• Some BD-ROMs do not include secondary video.
2/2 English
Dolby True HD
96kHz 7.1ch L C R Ls Rs Lb Rb LFE
• Secondary video mark
is displayed for scenes at which
ꢁ
secondary video is recorded if Angle/Secondary Indicator is
set to On (page 45).
Number of
channels
Channels recorded
on disc
Audio type
Turning the Secondary Video off
• The audio streams/channels can also be switched by selecting
Audio or Secondary Audio from the TOOLS menu.
Press SECONDARY VIDEO, then press CLEAR.
Note
Displaying the disc information
• The types of recorded audio streams/channels depend on the
disc and file.
BD
Video files
Image files
Audio files
• If the audio stream/channel is not switched when AUDIO is
pressed, switch it from the menu screen.
DVD
AVCHD
CD
• In some cases the secondary audio may switch or the switching
screen provided on the disc may be displayed immediately,
without the current secondary audio or the total number of
secondary audio streams recorded on the disc being displayed.
Press DISPLAY.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
• Some BD-ROMs do not include secondary audio.
DISPLAY POPUP MENU
MENU
• Secondary audio mark
is displayed for scenes at which
TOOLS
TOP MENU
secondary audio is recorded if Angle/Secondary Indicator is
set to On (page 45).
The disc information appears on the TV screen. The information
switches each time the button is pressed.
Turning the Secondary Audio off
The information display differs during playback and when playback
is stopped.
Press SECONDARY AUDIO, then press CLEAR.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Input the time.
Using the Play Mode
functions
04
Use the number buttons (0 to 9) or / to input the time.
Use / to move the cursor.
Playing from a specific time (Time
Search)
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
1
During playback, press PLAY MODE to display the Play
Mode screen.
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
ENTER
TOOLS
TOP MENU
HOME
MENU
RETURN
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
2
Select Time Search.
Use / to select, then press ENTER.
Time Search
1
2
:
4
5
:
0
0
Search
TOOLS
TOP MENU
ENTER
Note
HOME
MENU
RETURN
• To play from 45 minutes, input 0, 0, 4, 5, 0 and 0, then press
ENTER.
• To play from 1 hour 20 minutes, input 0, 1, 2, 0, 0 and 0, then
press ENTER.
Play Mode
• Press CLEAR to clear the values you have input.
Time Search
Title Search
Chapter Search
A-B Repeat
4
Starting playback from the specified time.
Use / to select Search, then press ENTER.
Repeat/Random
Closing the Play Mode screen
Press PLAY MODE or
HOME MENU.
Note
• There are some discs for which Time Search is not available.
Playing a specific title, chapter or
track (Search)
1
Press PLAY MODE to display the Play Mode screen.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
2
Select the type of search.
Use / to select, then press ENTER.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
See the table on page 34 for the search types.
1
During playback, press PLAY MODE to display the Play
04
Mode screen.
TOOLS
TOP MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
ENTER
DISPLAY POPUP MENU
MENU
HOME
MENU
RETURN
TOOLS
TOP MENU
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
Play Mode
2
Select A-B Repeat.
Time Search
Title Search
Chapter Search
A-B Repeat
Use / to select, then press ENTER.
Play Mode
Repeat/Random
Time Search
Title Search
Chapter Search
A-B Repeat
3
Input the number.
Use the number buttons (0 to 9) or / to input the number.
Repeat/Random
Use / to move the cursor.
3
Select the starting point for A-B Repeat.
Use / to select A (Start), then press ENTER.
CLEAR
ENTER
A-B Repeat
A (Start)
B (End)
Off
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
4
Select the end point for A-B Repeat.
DISPLAY POPUP MENU
MENU
Use / to select B (End), then press ENTER.
TOOLS
A-B Repeat playback starts.
TOP MENU
To cancel A-B Repeat play
• Select Off from the Repeat/Random screen, then press ENTER.
ENTER
HOME
MENU
• During playback, press STOP or CLEAR.
RETURN
Note
• There are some discs for which A-B Repeat play is not available.
• A-B Repeat play is canceled in the following cases:
Title
Title Search
0
3
2
Search
– When the angle is switched (for BD-ROM and DVD-Video
discs only).
4
Starting playback from the specified title, chapter or track.
– When you search outside the repeat range.
Use / to select Search, then press ENTER.
– When you start other Repeat Play or Random Play.
Note
Playing repeatedly (Repeat Play)
• To search for title 32, input 0, 3 and 2, then press ENTER.
• There are some discs for which searching is not available.
• Press CLEAR to clear the values you have input.
Use this procedure to play the currently playing disc, title, chapter,
track or file repeatedly.
1
During playback, press PLAY MODE to display the Play
Playing a specific section within a
title or track repeatedly (A-B
Repeat)
Mode screen.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Use this procedure to play a specific section within a title or track
repeatedly.
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select Repeat/Random.
Playing in random order (Random
Play)
04
Use / to select, then press ENTER.
TOOLS
TOP MENU
Use this procedure to play the tracks or files in random order.
ENTER
1
During playback, press PLAY MODE to display the Play
HOME
MENU
Mode screen.
RETURN
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Play Mode
DISPLAY POPUP MENU
MENU
Time Search
Title Search
TOOLS
TOP MENU
Chapter Search
A-B Repeat
Repeat/Random
The Play Mode screen can also be displayed by selecting Play Mode
from the TOOLS menu.
2
Select Repeat/Random.
Use / to select, then press ENTER.
3
Select the type of Repeat Play.
Use / to select, then press ENTER.
TOOLS
TOP MENU
See the table on page 34 for the types of Repeat Play.
ENTER
Repeat/Random
HOME
MENU
RETURN
Off
Repeat Title
Repeat Chapter
Play Mode
Time Search
Track Search
A-B Repeat
To cancel Repeat Play
• Select Off from the Repeat/Random screen, then press ENTER.
Repeat/Random
• During playback, press STOP or CLEAR.
3
Select the Random Play.
Note
Use / to select, then press ENTER.
• There are some discs and files for which Repeat Play is not
available.
Repeat/Random
• The type of repeat modes depends on the disc and file being
played. See the table on page 34.
Off
Repeat All
Repeat Track
Random Track
• Repeat Play is canceled in the following cases:
– When the angle is switched (for BD-ROM and DVD-Video
discs only).
– When you search outside the repeat range.
To cancel Random Play
• Select Off from the Repeat/Random screen, then press ENTER.
– When you start other Repeat Play or Random Play.
• During playback, press STOP or CLEAR.
Note
• There are some discs and files for which Random Play is not
available.
• Random Play is canceled in the following cases:
– When you use the search function.
– When you start Repeat Play.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About Play Mode types
04
The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the
usable functions on the table below.
Disc/file type
DVD-R
DVD-RW
(VR format)
1
Play Mode type
Mark
DVD-
BD-R
BD-RE
Image
file
Audio
file
2
AVCHD Video file
Audio CD
BD-ROM
2
Video
Playing a specific section within a
title or track repeatedly (A-B Repeat)
Playing a title repeatedly (Title
Repeat)
Playing a chapter repeatedly
(Chapter Repeat)
Playing a track or file repeatedly
(Track Repeat)
Playing all the titles, tracks or files
on the disc repeatedly (All Repeat)
3
4
4
5
6
Playing the tracks or files in random
order (Random Track)
Playing the tracks or files in random
order (Random File)
Playing from a specific time (Time
Search)
—
—
—
Playing a specific title (Title Search)
Playing a specific chapter (Chapter
Search)
Playing a specific track (Track
Search)
—
1. The type of Play Mode is indicated by the mark.
2. For BD-ROM and DVD-Video discs, some of the functions cannot be used with some titles.
3. The original titles are played repeatedly. However, the playlist titles cannot be played repeatedly.
4. The files in the folder are played repeatedly.
5. The files in the folder or HMG Playlist are played repeatedly.
6. The tracks in the disc or HMG Playlist are played repeatedly.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the title or track to be played.
Playing from the Home
Media Gallery
04
Use / to select, then press ENTER.
BD-R BDAV
My Favorite TV Program
1 Morning serial drama
2 News at noon
3 Evening movie
4 Midnight variety show
5 Playback protection
6 World heritage
7 Drama: Blank time
8 Music and us
The Home Media Gallery lets you display a list of the titles, tracks or
files recorded on the disc. The discs that can be played from the
Home Media Gallery are as shown below (see also page 8).
• BD-R/-RE discs
• DVDs recorded in VR format
• Audio CDs (CD-DAs and DTS-CDs)
10 items
Title Total : 0 h 54 m 30 s
Recording Date :
Original
11/11/2008
• DVDs/CDs on which only data files of video, image or audio files,
etc. are recorded
Playback starts.
Closing the Home Media Gallery
Playing discs
Press HOME MEDIA GALLERY or
HOME MENU.
1
Press HOME MEDIA GALLERY to display the Home Media
Note
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
• When playing an audio CD (CD-DA or DTS-CD), the Now Playing
screen is displayed.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
• Some BD-R/-RE discs have playback protection. To cancel the
protection, input the password set for the disc.
DISPLAY POPUP MENU
MENU
• To play DVD-R/-RW (VR format) playlists, switch to the playlist
using the Original/Play List command on the TOOLS menu
(page 24).
TOOLS
TOP MENU
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from Home Menu then pressing ENTER.
Playing video files
2
Select the disc.
Use / to select, then press ENTER.
TOOLS
TOP MENU
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
ENTER
HOME
MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
RETURN
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Home Media Gallery
BD PLAYER
The Home Media Gallery can also be displayed by selecting Home
BD-R BDAV
HMG Playlist
Media Gallery from Home Menu then pressing ENTER.
2
Select the disc.
Use / to select, then press ENTER.
TOOLS
TOP MENU
Search for the part you want to play from a list of the disc's content.
ENTER
HOME
MENU
RETURN
Home Media Gallery
BD PLAYER
DVD-RW
HMG Playlist
Search for the part you want to play from a list of the disc's content.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select Movies.
04
Note
Use / to select Movies, then press ENTER.
• It may take a few seconds before playback starts. This is normal.
• It may not be possible to play some files properly.
• The number of views may be restricted (page 10).
DVD-RW
Movies
Photos
Music
Playing image files
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
View available movies.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
4
Select Folders or All Movies.
DISPLAY POPUP MENU
MENU
Use / to select, then press ENTER.
TOOLS
TOP MENU
• Folders – The files in the selected folder are displayed.
• All Movies – All the recorded files are displayed.
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from the Home Menu then pressing ENTER.
Movies
DVD-RW
2
Select the disc.
Folders
All Movies
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
Home Media Gallery
BD PLAYER
If you have selected All Movies, proceed to step 6.
DVD-RW
HMG Playlist
5
Select the folder containing the file you want to play.
Use / to select, then press ENTER.
Folders
DVD-RW/Movies
Movie Folder001
Movie Folder002
Movie Folder003
Movie Folder004
Movie005.divx
Movie006.divx
Movie007.divx
Movie008.divx
Search for the part you want to play from a list of the disc's content.
3
Select Photos.
Use / to select Photos, then press ENTER.
15 items
DVD-RW
Movies
Photos
Music
A list of the files and folders in the selected folder is displayed.
6
Select and set the file you want to play.
Use / to select, then press ENTER.
Movie Folder001
DVD-RW/Movies/Folders
Movie001.divx
Movie002.divx
Movie003.divx
Movie004.divx
Movie005.divx
Movie006.divx
Movie007.divx
Movie008.divx
View available photos.
20 items
Playback starts from the selected file, and continues until the end of
the list is reached. Use / to play the previous or next file.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select Folders or All Photos.
Rotating images
04
Use / to select, then press ENTER.
Press ANGLE while playing a slideshow.
INPUT
SELECT
• Folders – The files in the selected folder are displayed.
• All Photos – All the recorded files are displayed.
CH
VOL
FL DIMMER
AUDIO SUBTITLE ANGLE
Photos
DVD-RW
Folders
All Photos
•
The image rotates each time the button is pressed (90°
180° 270° 0° ...).
The image can also be rotated by selecting Rotate from the TOOLS
menu.
Playing audio files
If you have selected All Photos, proceed to step 6.
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
5
Select the folder containing the file you want to play.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
Use /// to select, then press ENTER.
TOOLS
TOP MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
ENTER
TOOLS
TOP MENU
HOME
MENU
RETURN
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from Home Menu then pressing ENTER.
2
Select the disc.
Folders
Use / to select, then press ENTER.
DVD-RW/Photos
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
25 items
Folder Name : My Folder
Home Media Gallery
BD PLAYER
A list of the files and folders in the selected folder is displayed.
Select and set the file you want to play.
Use /// to select, then press ENTER.
CD-ROM
HMG Playlist
6
My Folder
DVD-RW/Photos/Folders
Search for the part you want to play from a list of the disc's content.
3
Select Music.
Use / to select Music, then press ENTER.
99 items
File Name : HDPhoto.jpg
Resolution : 1920 × 1080
Date/Time : 2008/7/1 PM0:01
CD-ROM
Movies
Photos
Music
A slideshow starts from the selected file, and continues until the end
of the list is reached. Use / to display the previous or next
file.
About Slideshow
A display of the files on the disc or in the folder that switches
automatically.
View available music.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Select Folders or All Songs.
Playing in the desired order (HMG
Playlist)
04
Use / to select, then press ENTER.
• Folders – The files in the selected folder are displayed.
• All Songs – All the recorded files are displayed.
The discs that can add tracks and files to the HMG (Home Media
Gallery) Playlist are as shown below.
Music
CD-ROM
• Audio CDs (CD-DAs and DTS-CDs)
Folders
All Songs
• DVDs/CDs on which audio files are recorded
Adding tracks/files
Use this procedure to add tracks and files, and create the HMG
Playlist.
1
Press HOME MEDIA GALLERY to display the Home Media
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
If you have selected All Songs, proceed to step 6.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
5
Select the folder containing the file you want to play.
DISPLAY POPUP MENU
MENU
Use / to select, then press ENTER.
TOOLS
TOP MENU
Folders
CD-ROM/Music
The Home Media Gallery can also be displayed by selecting Home
Media Gallery from Home Menu pressing ENTER.
Music Folder001
Music Folder002
Music Folder003
Music Folder004
Music005.mp3
Music006.mp3
Music007.mp3
Music008.mp3
2
Select the disc.
Load the disc beforehand.
Use / to select, then press ENTER.
TOOLS
TOP MENU
15 items
ENTER
A list of the files and folders in the selected folder is displayed.
HOME
MENU
RETURN
6
Select and set the file you want to play.
Use / to select, then press ENTER.
Home Media Gallery
BD PLAYER
Music Folder001
CD-ROM/Music/Folders
CD-ROM
Music001.mp3
Music002.mp3
Music003.mp3
Music004.mp3
Music005.mp3
Music006.mp3
Music007.mp3
Music008.mp3
HMG Playlist
Search for the part you want to play from a list of the disc's content.
20 items
3
Select the track/file to be added.
Playback starts from the selected file, and continues until the end of
the list is reached. Use / to play the previous or next file. The
Now Playing screen (shown below) is displayed.
Use / to select.
Folders
CD-ROM/Music
Currently playing
file
Music001.mp3
Music002.mp3
Music003.mp3
Music004.mp3
Music005.mp3
Music006.mp3
Music007.mp3
Music008.mp3
Music 001.mp3
Play 0.02.33
0.05.34
DATA DISC
Total file playing
time
Elapsed time
15 items
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select HMG Playlist.
4
5
Press
TOOLS to display the TOOLS menu.
04
Use / to select, then press ENTER.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
Home Media Gallery
BD PLAYER
TOOLS
TOP MENU
CD-ROM
HMG Playlist
ENTER
Select Add to HMG Playlist.
Use / to select, then press ENTER.
Folders
CD-ROM/Music
Display the HMG Playlist.
Music001.mp3
Music002.mp3
Music003.mp3
Music004.mp3
Music005.mp3
3
Select the track/file to be played.
Use / to select, then press ENTER.
HMG Playlist
CD-ROM
BD PLAYER
TOOLS
Play from Beginning
Add to HMG Playlist
Now Playing
1 Track15.mp3
2 Track07.mp3
3 Track03.mp3
4 Track16.mp3
5 Track08.mp3
6 Track05.mp3
7 Track10.mp3
8 Track03.mp3
The track or file selected in step 3 is added to the HMG Playlist.
To add more tracks or files, repeat steps 3 to 5.
To add the currently playing track/file to
21 items
the HMG Playlist
Playback starts from the selected track/file, and continues until the
end of the list is reached. Use / to play the previous or next
track/file. The Now Playing screen (shown below) is displayed.
While the track/file is playing, press
TOOLS to display
the TOOLS menu.
Currently playing
track/file
Use / to select Add to HMG Playlist, then press ENTER.
Music 001.mp3
Play 0.02.33
0.05.34
HMG
Note
DATA DISC
Total track/file
playing time
Elapsed time
• A maximum of 24 tracks/files can be added to the HMG Playlist.
• The HMG Playlist is cleared in the following cases:
– When the power is turned off.
– When the disc tray is opened.
Playing the HMG Playlist
1
Press HOME MEDIA GALLERY to display the Home Media
Press STOP to stop playback. When playback of an audio CD is
stopped, the Now Playing screen turns off. When playback of an
audio file is stopped, the HMG Playlist screen reappears.
Gallery.
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
Deleting tracks/files from the HMG Playlist
DISPLAY POPUP MENU
MENU
Select the track/file to be deleted, then press
TOOLS to
TOOLS
TOP MENU
display the TOOLS menu.
The Home Media Gallery can also be displayed by selecting Home
Use / to select Delete from HMG Playlist, then press
Media Gallery from Home Menu pressing ENTER.
ENTER.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
05
Adjusting audio and video
2
Select the item to be adjusted.
Adjusting the video
Use / to select.
Video Adjust [ Memory1 ]
The quality of the playback picture can be adjusted according to the
TV you are using.
Prog. Motion
Pure Cinema
Motion
Still
Auto1
1
During playback, press VIDEO ADJUST to display the Video
Off
Off
Max
Max
Max
Max
Fine
Fine
YNR
Adjust screen.
CNR
RED
GREEN YELLOW
BLUE
Off
BNR
Off
MNR
VIDEO ADJUST
Soft
Soft
Sharpness High
Sharpness Mid
The Video Adjust screen can also be displayed by selecting Video
Adjust from the TOOLS menu.
3
Adjust the picture quality.
When / are pressed, the adjustments can be made viewing the
picture. The detailed settings screen reappears when ENTER is
pressed.
2
Select a preset.
TOOLS
TOP MENU
Prog. Motion
Motion
Still
ENTER
• Prog.Motion – Adjust according to the type of image (moving
or still image). This is effective mainly when outputting video
materials as progressive images.
HOME
MENU
RETURN
• Pure Cinema – This setting optimizes the operation of the
progressive scanning circuit for playing film materials. Normally
set it to Auto1. If the picture seems unnatural, switch this to
Auto 2, On or Off (page 41).
Select using / according to the TV being used.
Video Adjust
PDP
Adjustments
• YNR – Reduces noise in the luminance (Y) signal.
• CNR – Reduces noise in the chroma (C) signal.
• LCD – Select this when connected to a liquid crystal display TV.
• BNR – Reduces the block noise (block-shaped distortion
generated upon MPEG compression).
• PDP – Select this when connected to a plasma TV of another
brand.
• MNR – Reduces the mosquito noise (distortion along the
contours of the picture generated upon MPEG compression).
• Pioneer PDP – Select this when connected to a Pioneer plasma
TV.
• Sharpness High – Adjusts the sharpness of the high-frequency
(detailed) elements in the picture.
• Projector – Select this when connected to a front projector.
• Professional – With this setting, video signal processing is
restrained. Select this when connected to a professional
monitor.
• Sharpness Mid – Adjusts the sharpness of the mid-frequency
(less detailed) elements in the picture.
• Detail – Adjusts the picture’s contours.
• Memory1 to 3 – Picture quality settings with adjusted
parameters can be stored in the memory. For a description of
the parameters, see When Memory1, 2 or 3 is selected below.
• White Level – Adjusts the level of the white portions.
• Black Level – Adjusts the level of the black portions.
• Black Setup – Select the black level as the setup level. Normally
select 7.5 IRE. If the black level is too bright due to the
combination with the connected TV, select 0 IRE.
When Memory1, 2 or 3 is selected
1
Select Adjustments.
• Gamma Correction – Adjusts how the dark portions of the
picture look.
Use to select Adjustments, then press ENTER.
A detailed settings screen appears.
• Hue – Adjusts the balance between green and red.
• Chroma Level – Adjusts the density of the colors.
Note
• Prog.Motion and Pure Cinema have the effect only for pictures
recorded in the interlaced scan format (480i or 1080i signals).
• Prog.Motion is disabled when Pure Cinema is set to On.
• Black Setup has the effect only for pictures output from the
VIDEO and S-VIDEO output terminals.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
• The items below do not apply to video signals output from the
VIDEO and S-VIDEO output terminals, nor to 480i video signals
output from the COMPONENT VIDEO output terminal (except
when the Output Video Resolution is set to 480i (page 25)).
3
Select and set Audio DRC.
05
Use / to select, then press ENTER.
Audio Adjust
Audio DRC
Channel Level
– Sharpness High
– Detail
– Sharpness Mid
– White Level
Lip Sync
– Black Level
– Hue
– Gamma Correction
– Chroma Level
4
Adjust the setting.
TOOLS
TOP MENU
Closing the Video Adjust screen
Press
HOME MENU.
ENTER
About Pure Cinema
HOME
MENU
RETURN
There are two types of video signals:
• Video material – Video signals recorded at 30 frames/second
• Film material – Video signals recorded at 24 frames/second
Use / to switch between Off, Low, Medium, High and Auto.
“Pure Cinema” uses signal processing suited for “film material”
when converting 480i or 1080i interlaced video signals into
progressive video signals, resulting in clear picture reproduction
without losing the quality of the material.
Audio DRC
Off
Closing the Audio DRC screen
is displayed on the disc information screen when playing the
“film material” pictures of BD-ROM, BD-R/-RE and DVD-Video discs
(page 30).
Press ENTER or
HOME MENU.
Note
• This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby
Digital audio signals of BDs, DVDs and video files.
Adjusting the audio
• When Auto is selected, the setting has the same effect as High
or Off for Dolby TrueHD signals, depending on the content. For
Dolby Digital Plus and Dolby Digital, the setting has the same
effect as Off.
Adjusting the Audio DRC
Audio DRC (Dynamic Range Control) has the effect of playing loud
sounds softly and soft sounds loudly. Adjust the setting for example
when viewing movies late at night and the dialogs are difficult to hear.
• Audio DRC affects the audio signals output from the following
audio output terminals:
– Analog audio signals output from the AUDIO OUT (7.1 ch)
terminals.
1
During playback, display the TOOLS menu.
Press TOOLS.
– Linear PCM audio signals output from the DIGITAL OUT
terminals or HDMI OUT terminals.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
• The effect may be weak for some discs.
TOOLS
TOP MENU
Adjusting the output level of the
different speakers during BD/DVD
playback (Channel Level)
ENTER
2
Select and set Audio Adjust.
Use / to select, then press ENTER.
TOOLS
TOP MENU
Caution
• Channel Level of the speakers set to None or No at Speaker
Setup cannot be adjusted (page 47).
ENTER
HOME
MENU
1
During playback, display the TOOLS menu.
RETURN
Press TOOLS.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
BD PLAYER
TOOLS
Audio
Subtitle
Audio Adjust
Video Adjust
TOOLS
TOP MENU
Secondary Audio
ENTER
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select and set Audio Adjust.
1
During playback, display the TOOLS menu.
05
Use / to select, then press ENTER.
Press TOOLS.
TOOLS
TOP MENU
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
ENTER
2
Select and set Audio Adjust.
BD PLAYER
TOOLS
Audio
Subtitle
Use / to select, then press ENTER.
Audio Adjust
Video Adjust
TOOLS
TOP MENU
Secondary Audio
ENTER
3
Select and set Channel Level.
Use / to select, then press ENTER.
HOME
MENU
RETURN
Audio Adjust
Audio DRC
Channel Level
BD PLAYER
TOOLS
Audio
Subtitle
Audio Adjust
Video Adjust
Secondary Audio
Lip Sync
4
Adjust the output level.
Use / to select, / to adjust.
3
Select and set Lip Sync.
The output levels of the L, C, R, SL, SR, SBL, SBR and SW speakers
can be adjusted within the range of –6.0 dB to +6.0 dB.
Use / to select, then press ENTER.
Audio Adjust
Audio DRC
Channel Level
L
C
R
SR
SBR
SBL
SL
SW
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
Lip Sync
4
Select Auto or Manual.
Use / to select.
Lip Sync
Auto
5
Press ENTER to set.
• Auto – The player automatically adjusts the timing of the video
and audio when connected to a device equipped with the HDMI
Auto Lipsync Correction feature using an HDMI cable.
Note
• The adjustment of Channel Level is only applicable to the sound
output from AUDIO OUT (7.1 ch).
• Manual – Adjust manually while viewing the video.
If you have selected Manual, proceed to step 5.
• This cannot be adjusted when in the following cases:
– Output Terminal is set to HDMI MAIN or DIGITAL AUDIO
(page 44).
5
Adjusting the amount of audio delay.
Press , then use / to adjust.
– Audio Output Mode is set to 2 Channel (page 45).
Lip Sync
– Channel Level is set to Fix (page 45).
Manual
100 ms
Closing the Channel Level screen
0
50
100
150
200
250
Press
HOME MENU.
The audio delay can be adjusted from 0 to 250 ms in steps of 5 ms.
Adjusting the audio delay (Lip
Sync)
Note
• The Lip Sync adjustment is only applicable to the output
terminal set at Output Terminal (page 44).
Adjust the audio delay for the selected video output terminal if the
video and audio are not synchronized.
• The sound may be interrupted while setting the delay.
Closing the Lip Sync screen
Press ENTER or
HOME MENU.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
06
Advanced settings
Changing the settings
Operating the Initial Setup screen
1
When playback is stopped, display the Home Menu screen.
Press HOME MENU.
ENTER
HOME
MENU
RETURN
PLAY
2
Select and set Initial Setup.
Use / to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
HOME MENU
BD PLAYER
Home Media Gallery
Initial Setup
3
Select the item and change the setting.
Use /// to select, then press ENTER.
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
TV Aspect Ratio
4:3 Video Out
DVD 16:9 Video Out
ꢀ16:9 (Widescreen)
ꢀFull
ꢀLetter Box
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
Closing the Initial Setup screen
43
Press
HOME MENU.
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Note
• Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status.
• In Options, the factory default settings are indicated in bold.
Setting
Options
Explanation
TV Aspect Ratio
16:9 (Widescreen)
4:3 (Standard)
Full
Select this when connected to a wide (16:9) TV.
Select this when connected to a conventional TV.
4:3 pictures are displayed over the entire screen.
4:3 Video Out
Normal
4:3 pictures are displayed with vertical black bars along the sides. Select this when you
cannot switch the aspect ratio to 4:3 on the TV.
4:3 Video Out is only valid when TV Aspect Ratio is set to16:9 (Widescreen).
DVD 16:9 Video Out
Letter Box
16:9 pictures are displayed with black bars at the top and bottom when viewing on a 4:3
screen.
Pan & Scan
The picture is displayed over the entire screen, with the left and right sides of the 16:9
picture cropped. Select this to view 4:3 pictures over the entire screen. For some discs, the
picture will be displayed in the Letter Box mode even if Pan & Scan is set.
• DVD 16:9 Video Out is only valid when TV Aspect Ratio is set to 4:3 (Standard).
• DVD 16:9 Video Out is only valid when playing 16:9 pictures of DVD-Video discs. When other 16:9 pictures are played, they are output in the Letter Box
mode.
Output Terminal
HDMI MAIN
Select this to output audio signals from the HDMI OUT (MAIN) terminal.
Select this to output audio signals from the DIGITAL OUT terminals.
Select this to output audio signals from the AUDIO OUT (7.1 ch) terminals.
DIGITAL AUDIO
ANALOG AUDIO
• The optimum audio signals for the audio format and the player’s settings are output from the output terminal(s) set here.
• When HDMI MAIN or DIGITAL AUDIO is selected at Output Terminal, linear PCM audio signals (2 channels) are output from all terminals other than
the ones selected at Output Terminal.
• When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT or DIGITAL OUT terminals.
• To listen to the device connected to the HDMI OUT (SUB) terminal, select HDMI MAIN and turn off the power of the device connected to the HDMI
OUT (MAIN) terminal.
Dolby Digital Out
Dolby Digital 1
Dolby Digital 2
Dolby Digital audio signals are output. With BD-ROMs, the secondary audio and interactive
audio are mixed for output.
* Only valid for the DIGITAL OUT
terminals.
Dolby Digital audio signals are output. With BD-ROMs, the signals are output without
mixing the secondary audio and interactive audio signals.
Dolby Digital PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with Dolby
Digital audio signals. The Dolby Digital audio signals are converted into linear PCM audio
signals for output.
DTS Out
DTS 1
DTS Digital Surround audio signals are output. With BD-ROMs, the secondary audio and
interactive audio are mixed for output.
* Only valid for the DIGITAL OUT
terminals.
DTS 2
DTS Digital Surround audio signals are output. With BD-ROMs, the signals are output
without mixing the secondary audio and interactive audio signals.
DTS PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with DTS
Digital Surround audio signals. The DTS Digital Surround audio signals are converted into
linear PCM audio signals for output.
AAC Out
AAC
Select this when the connected AV receiver or amplifier, etc., is compatible with AAC audio
signals. The AAC audio signals are output.
* Only valid for the DIGITAL OUT
terminals.
AAC PCM
Select this when the connected AV receiver or amplifier, etc., is not compatible with AAC
audio signals. The AAC audio signals are converted into linear PCM audio signals for
output.
DTS Downmix
Stereo
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
(stereo) signals for output.
Lt/Rt
DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital
Surround audio signals converted to linear PCM audio signals are converted into 2-channel
signals compatible with Dolby Surround for output (when the connected AV receiver or
amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the
linear PCM audio signals as surround audio signals).
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Options
Explanation
06
Audio Output Mode
2 Channel
Select this when the TV’s analog 2-channel (stereo) audio input terminals are connected to
the player’s AUDIO OUT (7.1 ch) terminals.
* Only valid for the AUDIO OUT
(7.1 ch) terminals.
Multi-channel
Select this when the multi-channel audio input terminals of an AV receiver or amplifier, etc.,
are connected to the player’s AUDIO OUT (7.1 ch) terminals.
Speaker Setup
Set whether or not speakers are connected to the AV receiver or amplifier, as well as the size of the speakers. For
details, see Changing the speaker setup on page 47.
* Only valid for the AUDIO OUT
(7.1 ch) terminals.
Speaker Distance
Specify the distance of your speakers from your listening position (page 47).
* Only valid for the AUDIO OUT
(7.1 ch) terminals.
Channel Level
Fix
The output for the various speakers is set to the maximum.
* Only valid for the AUDIO OUT
(7.1 ch) terminals.
Variable
The output level of the various speakers is set within the range of –6.0 dB to +6.0 dB (in 0.5
dB steps) (page 47).
HDMI High Speed Transmission On
Select this when connected with a High Speed HDMI™ cable (page 15).
Select this when connected with a Standard HDMI™ cable (page 15).
Off
The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High Speed Transmission setting.
HDMI Color Space
Auto
Select this to automatically switch the video output between YCbCr and RGB signals
according to the connected equipment.
YCbCr 4:4:4
Select this to output the video signals as YCbCr 4:4:4 signals.
Select this to output the video signals as YCbCr 4:2:2 signals.
YCbCr 4:2:2
RGB (16 to 235)
Select this to output the video signals as RGB signals. Choose this if the colors seem too
dense and all the dark colors are displayed in a uniform black when RGB (0 to 255) is
selected.
RGB (0 to 255)
Select this to output the video signals as RGB signals. Choose this if the colors seem too
faint and the black seems too bright when RGB (16 to 235) is selected.
Normally it is recommended to set this to Auto. When set to Auto, the optimum video signals for your TV are output.
HDMI Audio Out
Auto
The signals are output with as many audio channels as possible. In cases when the number
of channels does not decrease when the signals are output as such without converting
them to linear PCM, they are output as such (page 54).
* HDMI MAIN only.
PCM
Select this when you want the secondary audio and interactive audio signals to be mixed
for output or when you want to output prioritizing sampling frequency over the number of
channels (page 54).
PQLS
Auto
Off
Enables PQLS function (page 16).
Disables PQLS function (page 16).
* HDMI MAIN only.
KURO LINK
On
Select this to control the player with the remote control of the AV device connected using
an HDMI cable. Also refer to About KURO LINK function on page 16.
* HDMI MAIN only.
Off
Select this when you do not want to control the player with the remote control of the AV
device connected using an HDMI cable.
Still Picture
Field
Frame
Auto
On
This eliminates instability of the picture when playback is paused.
This makes pictures clear when playback is paused, but instability may be observed.
Field or Frame is switched automatically according to the disc or file being played.
Angle/Secondary Indicator
Select this to display the angle mark, secondary video mark and secondary audio mark on
the TV screen (pages 29 and 30).
Off
Select this if you do not want to display the angle mark, secondary video mark and
secondary audio mark on the TV screen.
DivX VOD
Registration Code
Displays the player’s registration code required to play DivX VOD files (page 11).
The BD layer of hybrid discs with two or more layers (BD and DVD or CD) is played.
Hybrid Disc Playback
BD
DVD
The DVD layer of hybrid discs with two or more layers (BD and DVD) is played. If there is no
DVD layer, the BD layer is played.
CD
The CD layer of hybrid discs with two or more layers (BD and CD) is played. If there is no CD
layer, the BD layer is played.
Remove the disc from the disc tray when changing the setting.
BDMV/BDAV Playback Priority
BDMV
Select this to play the BDMV format on BD-R/-RE discs containing both BDMV and BDAV
formats.
BDAV
Select this to play the BDAV format on BD-R/-RE discs containing both BDMV and BDAV
formats.
45
En
Remove the disc from the disc tray when changing the setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting
Options
Explanation
06
OSD Language
English
Select this to set the language of the on-screen displays to English.
Choose a language for the on-screen displays from the listed languages.
Select this to set both the BD-ROM and DVD-Video default audio language to English.
available languages
English
Audio Language
* For some discs, it may not be
possible to change to the selected
language.
available languages
Choose a language from the listed languages to set the default audio language for BD-ROM
and DVD-Video playback.
Other
Continue to the next screen to set the default audio language for BD-ROM and DVD-Video
playback. You can select the language name or enter the code number (see on page 55 for
the code table).
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.
Subtitle Language
English
Select this to set the default subtitle language for BD-ROM and DVD-Video playback to
English.
* For some discs, it may not be
possible to change to the selected
language.
available languages
Other
Choose a language from the listed languages to set the default subtitle language for BD-
ROM and DVD-Video playback.
Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video
playback. You can select the language name or enter the code number (see on page 55 for
the code table).
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.
BDMV/DVD-Video Menu Lang.
w/Subtitle Language
available languages
Other
Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle
language.
* For some discs, it may not be
possible to change to the selected
language.
Choose a language from the listed languages to set the default language for BD-ROM and
DVD-Video menus.
Continue to the next screen to set the default menu language for BD-ROM and DVD-Video
menus. You can select the language name or enter the code number (see on page 55 for
the code table).
If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.
Subtitle Display
On
Select this to display the subtitles.
Off
Select this if you do not want to display the subtitles. Note that on some discs the subtitles
are displayed by force.
Set Password (Change Password) Register (change) the password for parental lock settings or for unlocking to play DVD-Video with parental lock feature
(page 48).
DVD-Video Parental Lock
BDMV Parental Lock
Country Code
Change the player’s parental lock level (page 49).
Change the restricted age (page 49).
Change the Country/Area code (page 50).
IP Address
Select this to set the IP address of the player and DNS server (page 50).
Only set the proxy server if so instructed by your Internet service provider (page 50).
Select this to display a list of the network settings (page 51).
Select this to test the network connection (page 51).
Proxy Server
Display Network Configuration
Connection Test
On Screen Display
On
Select this to display the operation indicators (Play, Stop, etc.) on the TV screen.
Off
Select this if you do not want to display the operation indicators (Play, Stop, etc.) on the TV
screen.
Screen Saver
On
The screen saver is automatically activated if there is no operation for over 1 minute after
playback is stopped or paused.
The screen saver is automatically activated if there is no operation for over 1 minute after
the Home Menu or Home Media Gallery is displayed while playing a BD or DVD.
With audio CDs and audio files, the screen saver is automatically activated if no button is
operated for over 1 minute, even while the audio CD or audio file is playing.
The screen saver turns off when an operation is performed on the player or remote control.
The screen saver is not activated.
Off
Auto Power Off
On
Select this to turn the power off automatically (the power turns off automatically if no
operation is performed for over 30 minutes).
Off
Select this if you do not want the power to turn off automatically.
BDMV Data Erase
Software Update
When a BD-ROM is played, additional data may be stored in the player’s memory (local storage). If the message
indicating low memory (local storage) appears, erase the BDMV data (page 51).
The Software Update function can check for and download updated system software from the network server
(page 52).
Setup Navigator
Start making the settings using the Setup Navigator menu. For details, see Making settings using the Setup Navigator
menu on page 21.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select the speaker and adjust the distance.
Changing the speaker setup
Set whether or not speakers are connected to the AV receiver or
amplifier, as well as the size of the speakers. This setting is only valid
for the AUDIO OUT (7.1 ch) terminals.
06
Use / to select, then use / to adjust.
Speaker Distance
BD PLAYER
L
C
R
SR
SBR
SBL
SL
SW
10’00”
10’00”
10’00”
10’00”
10’00”
10’00”
10’00”
10’00”
Caution
• The Speaker Setup cannot be selected when Audio Output
Mode is set to 2 Channel. Change the setting to Multi-channel
(page 45).
1
Select and set Speakers Speaker Setup Next Screen.
Use / to select, then press ENTER.
• The distance of all the speakers can be set to between 1 inch and
45 feet, in units of 1 inch.
2
Select the speaker and change the setting.
Use / to select, then use / to change the setting.
Adjusting the output level of the different
speakers (Channel Level)
Speaker Setup
BD PLAYER
Adjust each output level of the different speakers by using test tones.
This setting is only valid for the AUDIO OUT (7.1 ch) terminals.
L/R
Large
Large
Large
Large
Yes
C
SL/SR
SBL/SBR
SW
Caution
• This cannot be selected when Audio Output Mode is set to 2
Channel. Change the setting to Multi-channel (page 45).
• Channel Level of the speakers set to None or No at Speaker
Setup cannot be adjusted (above).
• L/R (front left and right speakers): Large/Small
• C (center speaker): Large/Small/None
• Test tones are output. Lower the volume of the device connected
to the player.
• SL/SR (left and right surround speakers): Large/Small/None
• SBL/SBR (left and right surround back speakers): Large/Small/
None
1
Select and set Speakers Channel Level, then Fix or
Variable.
Use / to select, then press ENTER.
• SW (subwoofer): Yes/No
• Fix – The output level of all the speakers is set to the maximum.
Note
• Variable – The output level of all the speakers is set 6.0 dB lower
than when Fix is selected. From this point, the output levels of
the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted
within the range of –6.0 dB to +6.0 dB.
• Depending on the combination of settings of the different
speakers, the settings of speakers other than the one you have
changed may also change automatically.
If you have selected Variable, proceed to step 2.
Adjusting the distance of the different
speakers
2
Select and set the method for switching the speaker to be
adjusted.
Use / to select, then press ENTER.
Adjust the distance between you and the different speakers. This
setting is only valid for the AUDIO OUT (7.1 ch) terminals
.
Speaker Setup
BD PLAYER
Caution
Video Out
Audio Out
Speakers
HDMI MAIN
HDMI SUB
Playback
Test Tone Switching
• This cannot be selected when Audio Output Mode is set to 2
Channel. Change the setting to Multi-channel (page 45).
Select whether test tone output is
switched automatically or manually.
• Speaker Distance of the speakers set to None or No at Speaker
Setup cannot be adjusted (above).
1
Select and set Speakers Speaker Distance Next
Screen.
Use / to select, then press ENTER.
Auto
Manual
Language
Parental Lock
• Auto – Switch the speaker to be adjusted automatically.
• Manual – Switch the speaker to be adjusted manually.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Adjust the output level.
Registering or Changing the password
Use this procedure to register or change the code number required
for the Parental Lock settings.
06
Use / to select, / to adjust.
Channel Level
BD PLAYER
1
Select and set Parental Lock Set Password Next
L
C
R
SR
SBR
SBL
SL
SW
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
Screen.
Use / to select, then press ENTER.
2
Input the password.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
Note
• You can also adjust while listening to the sound being played
(page 41).
• The volume of the test tones output from the subwoofer may
seem lower than the tones output from the other channels.
Adjust the subwoofer based on the sound during playback
(page 41).
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
• When Auto is selected, the speaker cannot be selected with
/. In this case, test tones are not output from the subwoofer.
TOOLS
TOP MENU
Changing to other language at language
setting
ENTER
HOME
MENU
1
Select and set Language.
RETURN
Use / to select, then press ENTER.
2
Select and set Audio Language, Subtitle Language or
Initial Setup
BD PLAYER
BDMV/DVD-Video Menu Lang.
Use / to select, then press ENTER.
Video Out
Audio Out
Speakers
HDMI MAIN
HDMI SUB
Playback
Set Password
Enter new password
3
Select and set Other.
Use / to select, then press ENTER.
4
Change the language.
Use / to change, then press ENTER.
Language
Parental Lock
Initial Setup
BD PLAYER
Audio Language
Language
Video Out
Audio Out
Speakers
HDMI MAIN
HDMI SUB
Playback
3
Re-input the password.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
English
Number
0
5
1
4
Use / to move the cursor.
Initial Setup
BD PLAYER
Language
Parental Lock
Video Out
Audio Out
Speakers
HDMI MAIN
HDMI SUB
Playback
Set Password
• The language can also be changed using the number buttons.
Use / to move the cursor to Number, use the number
buttons (0 to 9) to input the number, then press ENTER. Refer to
Language Code Table and Country/Area Code Table on page 55.
Enter new password
Re-enter
Language
Parental Lock
Note
• If a language not recorded on the BD/DVD is set, one of the
recorded languages is automatically selected and played.
• To change the password, input the previously registered
password, then input the new password.
Note
• We recommend making a note of the password.
• If you forget the password, reset the player to the factory default
setting, then register the password again (page 53).
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Parental Lock level for
viewing DVDs
Changing the Age Restriction for viewing
BD-ROMs
06
Some DVD-Video discs containing scenes of violence, for example,
have Parental Lock levels (check the indications on the disc’s jacket
or elsewhere). To restrict viewing these discs, set the player’s level
to the level lower than the discs.
For BD-ROMs containing scenes of violence, for example, viewing
can be restricted by setting an age restriction for the BD-ROMs.
1
Select and set Parental Lock BDMV Parental Lock Next
Screen.
1
Select and set Parental Lock DVD-Video Parental Lock
Use / to select, then press ENTER.
Next Screen.
Use / to select, then press ENTER.
2
Input the password.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
2
Input the password.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
Use / to move the cursor.
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
CLEAR
ENTER
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
DISPLAY POPUP MENU
MENU
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
TOOLS
TOP MENU
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
ENTER
HOME
MENU
RETURN
ENTER
HOME
MENU
RETURN
Initial Setup
BD PLAYER
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
BDMV Parental Lock
Enter the password
Video Out
Audio Out
Speakers
HDMI MAIN
HDMI SUB
Playback
DVD-Video Parental Lock
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
Enter the password
Language
Parental Lock
3
Change the age.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
3
Change the level.
Use / to change, then press ENTER to set.
Use / to move the cursor.
Initial Setup
BD PLAYER
Initial Setup
BD PLAYER
Video Out
Audio Out
Speakers
DVD-Video Parental Lock
BDMV Parental Lock
Video Out
Audio Out
Speakers
Level
Off
Age Restriction
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
Note
Note
• The level can be set to Off or between Level1 and Level8. When
set to Off, viewing is not restricted.
• When Age Restriction is set to 255, viewing is not restricted.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Set IP address.
Changing the Country/Area code
06
Use /// to set the IP address of the player or DNS server,
then press ENTER.
1
Select and set Parental Lock Country Code Next
Screen.
Network
BD PLAYER
Use / to select, then press ENTER.
2
Input the password.
IP Address
Auto Set IP Address
IP Address
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Off
Subnet Mask
Default Gateway
Use / to move the cursor.
Off
Auto Set DNS Server Address
DNS Server (Primary)
DNS Server (Secondary)
• Auto Set IP Address
CLEAR
ENTER
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
On – The player’s IP address is obtained automatically. Select
this when using a broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration Protocol) server
function. This player’s IP address will automatically be allocated
from the DHCP server.
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Off – The player’s IP address must be set manually. Use the
number buttons (0 to 9) to input the IP address, subnet mask
and default gateway.
ENTER
• Auto Set DNS Server Address
HOME
MENU
RETURN
On – The DNS server’s IP address is obtained automatically.
Off – The DNS server’s IP address must be set manually. Use
the number buttons (0 to 9) to input the DNS server's IP address
stipulated by your Internet service provider.
Initial Setup
BD PLAYER
Country Code
Enter the password
Video Out
Audio Out
Speakers
Note
• When Auto Set IP Address is set to Off, Auto Set DNS Server
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
Address is also set to Off.
• For information on DHCP server function, refer to the network
device’s operating instructions.
• You may need to contact your Internet service provider or
network administrator when inputting the IP address manually.
3
Change the country/area code.
Setting the proxy server
Only set the proxy server if so instructed by your Internet service
provider.
Use / to change, then press ENTER to set.
Initial Setup
BD PLAYER
1
Select and set Network Proxy Server Next Screen.
Country Code
Video Out
Audio Out
Speakers
Use / to select, then press ENTER.
Code
2
Select and set Use or Not use at Proxy Server.
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
Use / to change, then press .
Number
Network
BD PLAYER
Proxy Server
Proxy Server
Server Select Method
Server Name
Use
Server Name
• The the country/area code can also be changed using the
number buttons. Use / to move the cursor to Number, use
the number buttons (0 to 9) to input the number, then press
ENTER. Refer to Language Code Table and Country/Area Code
Table on page 55.
Port Number
Setting the IP address
• Use – Select this when using a proxy server.
1
Select and set Network IP Configuration Next Screen.
• Not use – Select this when not using a proxy server.
Use / to select, then press ENTER.
If you have selected Use, proceed to step 3.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select and set Server Select Method.
When Auto Set IP Address is set to On, the values obtained
automatically are displayed.
06
Use / to change, then press .
Network
BD PLAYER
Display Network Config.
MAC Address
00 - E0 - 36 - 00 - 00 - 00
IP Address
192 . 168 . 0 .
255 . 255 . 255 .
192 . 168 . 0 .
0 . 0 . 0 .
2
0
1
0
0
CLEAR
ENTER
Subnet Mask
OUTPUT
RESOLUTION
SECONDARY
AUDIO
VIDEO
Default Gateway
DNS Server (Primary)
DNS Server (Secondary)
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
0 . 0 . 0 .
DISPLAY POPUP MENU
MENU
TOOLS
TOP MENU
Note
• “0.0.0.0” is displayed when each IP address has not been set.
ENTER
HOME
MENU
RETURN
Testing the network connection
1
Select and set Network Connection Test Start.
• IP Address – Input the IP address.
Use / to select, then press ENTER.
• Server Name – Input the server name.
“Network connection test completed successfully.” is displayed
once the test is completed. If any other message is displayed, check
the connections and/or settings (pages 20 and 50).
4
Input IP Address or Server Name
Use the number buttons (0 to 9) to input the number if you select IP
address by step 3. Use / to move the cursor.
Erasing the additional data from BD-ROMs
When a BD-ROM is played, additional data may be stored in the
player’s memory (local storage).
Use the number buttons (0 to 9) to input characters if you select
Server Name by step 3.
The characters that can be input for the server name are listed on
the table below. Pressing a button repeatedly cycles through the
characters shown.
If the message indicating low memory (local storage) appears, erase
the BDMV data.
• If you want to enter two characters in succession that are both
on the same button (for example a P and an R), press after
inputting the first character then input the second character.
Caution
• When the BDMV data is erased, all the data of secondary video
(Picture-in-Picture), secondary audio, bookmark, etc. that has
been stored is erased.
• Use CLEAR to delete the last character.
• Use / to move the displayed characters when all the input
characters cannot be displayed.
• It takes time to erase the BDMV data for a while. Do not unplug
the power cord while the data is being erased.
Key
1
Characters
Key
6
Characters
1
Select and set Options BDMV Data Erase Next Screen.
Use / to select, then press ENTER.
1 . –
m n o 6
a b c 2
d e f 3
g h i 4
j k l 5
p q r s 7
t u v 8
w x y z 9
0
2
7
2
Erase the data.
Use / to select Yes, then press ENTER.
3
8
4
9
OK to erase additional
BDMV data?
5
0
Do not turn power off
during erasure.
5
6
Input Port Number.
Press , use the number buttons (0 to 9) to input the number.
Press ENTER to set.
Yes
No
Displaying the network settings
1
Select and set Network Display Network Configuration
Next Screen.
Use / to select, then press ENTER.
The MAC address, IP address, subnet mask, default gateway and
DNS server (primary and secondary) settings are displayed.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Software updating
The software of the player can be updated by connecting it to the
Internet using a LAN cable.
Stretching widescreen pictures
vertically (Anamorphic Zoom)
06
Before updating the software, make sure that you have connected
the player to the network and made the necessary settings (pages 20
and 50).
Some discs include movies, etc., with a vertical-to-horizontal picture
rate of 2.35:1 recorded as 16:9 pictures with black bars at the top and
bottom of the screen. Turn this function on when projecting this type
of picture with a front projector equipped with an anamorphic lens.
Caution
1
During playback, display the TOOLS menu.
• Do not unplug the power cord during software updating.
Otherwise, the updating will be aborted and malfunction may
occur with the player.
Press TOOLS.
HOME MEDIA
GALLERY
DISPLAY POPUP MENU
MENU
• There are two processes for software updating, downloading
and updating. Both processes may take a certain period of time.
TOOLS
TOP MENU
• Depending on the Internet connection conditions, downloading
may take a long time.
ENTER
• Other operations are defeated during software updating.
Furthermore updating process cannot be canceled.
2
Select and set Anamorphic Zoom.
Use / to select, then use / to change the setting.
• When the front panel display is off, turn it on with FL DIMMER.
When updating the player’s software with the front panel display
off, do not unplug the power cord until the FL OFF indicator
turns off.
TOOLS
TOP MENU
ENTER
Note
HOME
MENU
RETURN
• Steps 1 to 2 are the operations performed by the user (they are
intended to download the software from the Internet).
• Steps 3 to 5 are the operations performed (automatically) by the
player (they are intended to update the software).
1
Select and set Options Software Update Start.
Use /// to select, then press ENTER.
• If the player is already running the latest software, the message
“The player’s software is up to date and does not need updating.”
is displayed.
BD PLAYER
TOOLS
Output Video Resolution
Play Mode
Anamorphic Zoom:Off On
2
Select and set Yes.
Use / to select Yes, then press ENTER.
• On – 16:9 pictures are stretched vertically, cropping the black
bars at the top and bottom of the 2.35:1 picture for output.
OK to start downloading
new software?
• Off – 16:9 pictures are output as such, without stretching them
vertically.
Current version X.XX
Latest version X.XX
Downloading takes
about XX minutes.
Note
Yes
No
• This is valid when TV Aspect Ratio is set to 16:9 (Widescreen)
(page 44).
• The help menu is displayed if the player cannot connect to the
Internet. Check the connections and settings (pages 20 and 50).
• When set to On, the top and bottom of 16:9 pictures with no
black bars at the top and bottom are also cropped.
• Even when set to On, the vertical stretch is canceled and the
original picture with the black bars reappears temporarily when
the Video Adjust screen is displayed. For other operation
screens, the top and bottom may be cropped, making the screen
hard to see.
3
Downloading of the software start.
The software download status is displayed on the screen.
• Depending on the Internet connection conditions, software
downloading may take a certain period of time.
4
Updating starts.
To close the TOOLS menu
The front panel display shows messages such as “DATA CHECK”,
“WRT SYS1”, “WRT DRV” and “WRT FLC”.
Press
TOOLS or
RETURN.
• Software updating may take a certain period of time.
5
Updating completes.
The front panel display shows “DOWNLOAD OK” and the player
turns off automatically.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Eliminating extraneous noise to
Restoring all the settings to the
06
play with high quality sound (Pure factory default settings
Audio)
1
Check that the player’s power is turned on.
This function suppresses unnecessary signals to reduce noise and
output high quality audio signals.
2
When a disc is playing, press to stop playback.
Eject the disc from the player.
The Pure Audio function includes the following modes:
3
While pressing , press STANDBY/ON.
• Mode 1 – Select this when listening to audio CDs and audio
files. This mode also provides higher quality sound than Mode
2 when playing only the audio portion of such video sources as
BDs, DVDs and video files.
Operate using the buttons on the player’s front panel.
Note
• Mode 2 – Select this when also viewing the video portion of
such video sources as BDs, DVDs and video files.
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 21).
• Off – Select this to disable the Pure Audio function.
• When all the settings are restored to the factory defaults, all the
data for the secondary video (Picture-in-Picture), secondary
audio, bookmarks, etc., is erased.
Caution
• When Mode 1 or Mode 2 is set, the operation is as described
below.
– When Mode 1 is set, only audio signals are output during
playback (except when an operation is being performed and
the disc menus are being displayed).
– Video signals are only output from the output terminal
selected with VIDEO SELECT (page 25).
– Audio signals are only output from the output terminal set at
Output Terminal (page 44).
– The player’s front panel display turns off during playback
(except when an operation is being performed and the disc
menus are being displayed).
– The PURE AUDIO indicator on the player’s front panel lights.
Switching the Pure Audio Mode
Press PURE AUDIO on the front panel.
The currently set Pure Audio mode is indicated on the player’s front
panel display.
The Pure Audio mode changes each time the button is pressed.
“PURE MODE1” “PURE MODE2” “PURE OFF”
Note
• The Pure Audio mode cannot be changed during playback.
AIR Studios Audio Tuning
With the cooperation of the world-class studio engineers at AIR
Studios, this player has been AIR Studios certified:
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About the audio output settings
06
The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table
below.
Caution
• When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT or DIGITAL OUT terminals
(page 44).
• When HDMI MAIN or DIGITAL AUDIO is selected at Output Terminal, linear PCM audio signals (2 channels) are output from all
terminals other than the ones selected at Output Terminal (page 44).
• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel audio signals.
AUDIO OUT (7.1 ch) terminals
DIGITAL OUT terminals
HDMI OUT (MAIN) terminal
Audio format
Converted to
Not converted to
1
1
4
4
2ch
Multi-channel
PCM
Auto
2
3
linear PCM audio linear PCM audio
6,7
BD-ROM Dolby Digital
5.1-channel audio
7.1-channel audio
5.1-channel audio
7.1-channel audio
Dolby Digital
Dolby Digital Plus
Dolby Digital
5
Dolby Digital
6,7
Plus
8
6,7,9
Dolby TrueHD
7.1-channel audio
Dolby TrueHD
DTS Digital
Surround
DTS Digital
5.1-channel audio
5.1-channel audio
6,10
Surround
Converted to 2-
channel audio
Converted to 2-
channel audio
DTS-HD High
Resolution Audio
DTS-HD High
Resolution
DTS Digital
5
Surround
6,8,10
11
11
Audio
5.1-channel audio
5.1-channel audio
DTS-HD Master
Audio
DTS-HD Master
6,10,12
Audio
Linear PCM
Converted to 2-
channel audio
8
8
7.1-channel audio
5.1-channel audio
7.1-channel audio 7.1-channel audio
7
BD-R/
-RE
Dolby Digital
Dolby Digital
Dolby Digital
Converted to 2-
channel audio
Converted to 2-
channel audio
5.1-channel audio
MPEG-2 AAC
MPEG-2 AAC
MPEG
MPEG-2 AAC
2-channel audio
Linear PCM
Dolby Digital
7
DVD-
Video
Dolby Digital
Dolby Digital
Converted to 2-
channel audio
Converted to 2-
channel audio
5.1-channel audio
5.1-channel audio
5.1-channel audio
5.1-channel audio
DTS Digital
Surround
DTS Digital
DTS Digital
Surround
10
Surround
MPEG
2-channel audio
Linear PCM
DVD (VR Dolby Digital
format)
Converted to 2-
channel audio
Converted to 2-
channel audio
7
Dolby Digital
Dolby Digital
MPEG
2-channel audio
Linear PCM
1. When Audio Output Mode is set to 2 Channel or Multi-channel (page 45).
2. When Dolby Digital Out is set to Dolby Digital PCM, DTS Out is set to DTS PCM, or AAC Out is set to AAC PCM (page 44).
3. When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 44).
4. When HDMI Audio Out is set to PCM or Auto (page 45).
5. When outputting Dolby Digital or DTS Digital Surround bitstream with settings of Dolby Digital 2 at Dolby Digital Out, DTS 2 at DTS Out, the secondary audio and
interactive audio signals are not mixed for output.
6. When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the
secondary audio and interactive audio signals are not mixed.
7. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in linear PCM (7.1 channels) or Dolby Digital
bitstream.
If the connected HDMI device is not compatible with Dolby Digital bitstream, the signals are output in linear PCM (2 channels).
8. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels), depending on HDMI High Speed Transmission setting
and/or the connected HDMI device (page 15).
9. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream, depending on HDMI High
Speed Transmission setting and/or the connected HDMI device (page 15).
10. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround
bitstream.
If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM (2 channels).
11. DTS Digital Surround signals converted to linear PCM audio signals are output.
12. When the output video resolution is set to 480i or 480p, the signals may be output in linear PCM (2 channels) or DTS Digital Surround bitstream, depending on HDMI
High Speed Transmission setting and/or the connected HDMI device (page 15).
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Note
• Only compatible with 7.1-channel surround back. 6.1-channel surround back is output in 7.1 channels. In other cases, output as audio
signals of 5.1-channels or less.
• When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device is lower, the signals
are output with the number of channels for which the device is compatible.
• The audio signals output from the HDMI OUT (SUB) and DIGITAL OUT terminals have a sampling frequency of 48 kHz (44.1 kHz for
audio CDs).
Language Code Table and Country/Area Code Table
Language Code Table
Language name, language code, input code
Abkhazian, ab/abk, 0102
Frisian, fy/fry, 0625
Galician, gl/glg, 0712
Georgian, ka/kat, 1101
German, de/deu, 0405
Greek, el/ell, 0512
Guarani, gn/grn, 0714
Gujarati, gu/guj, 0721
Hausa, ha/hau, 0801
Hebrew, iw/heb, 0923
Hindi, hi/hin, 0809
Macedonian, mk/mkd, 1311
Malagasy, mg/mlg, 1307
Malay, ms/msa, 1319
Malayalam, ml/mal, 1312
Maltese, mt/mlt, 1320
Maori, mi/mri, 1309
Marathi, mr/mar, 1318
Mongolian, mn/mon, 1314
Moldavian, mo/mol, 1315
Nauru, na/nau, 1401
Nepali, ne/nep, 1405
Norwegian, no/nor, 1415
Occitan, oc/oci, 1503
Oriya, or/ori, 1518
Slovak, sk/slk, 1911
Slovenian, sl/slv, 1912
Somali, so/som, 1915
Sotho, Southern, st/sot, 1920
Spanish, es/spa, 0519
Sundanese, su/sun, 1921
Swahili, sw/swa, 1923
Swati, ss/ssw, 1919
Swedish, sv/swe, 1922
Tagalog, tl/tgl, 2012
Tajik, tg/tgk, 2007
Afar, aa/aar, 0101
Afrikaans, af/afr, 0106
Albanian, sq/sqi, 1917
Amharic, am/amh, 0113
Arabic, ar/ara, 0118
Armenian, hy/hye, 0825
Assamese, as/asm, 0119
Aymara, ay/aym, 0125
Azerbaijani, az/aze, 0126
Bashkir, ba/bak, 0201
Basque, eu/eus, 0521
Belarusian, be/bel, 0205
Bengali, bn/ben, 0214
Bihari, bh/bih, 0208
Bislama, bi/bis, 0209
Breton, br/bre, 0218
Bulgarian, bg/bul, 0207
Burmese, my/mya, 1325
Catalan, ca/cat, 0301
Chinese, zh/zho, 2608
Corsican, co/cos, 0315
Croatian, hr/hrv, 0818
Czech, cs/ces, 0319
Danish, da/dan, 0401
Dutch, nl/nld, 1412
Dzongkha, dz/dzo, 0426
English, en/eng, 0514
Esperanto, eo/epo, 0515
Estonian, et/est, 0520
Finnish, fi/fin, 0609
Fijian, fj/fij, 0610
Faroese, fo/fao, 0615
French, fr/fra, 0618
Hungarian, hu/hun, 0821
Icelandic, is/isl, 0919
Indonesian, in/ind, 0914
Interlingua, ia/ina, 0901
Interlingue, ie/ile, 0905
Inupiaq, ik/ipk, 0911
Irish, ga/gle, 0701
Tamil, ta/tam, 2001
Tatar, tt/tat, 2020
Telugu, te/tel, 2005
Thai, th/tha, 2008
Oromo, om/orm, 1513
Panjabi, pa/pan, 1601
Persian, fa/fas, 0601
Tibetan, bo/bod, 0215
Tigrinya, ti/tir, 2009
Tonga (Tonga Islands), to/ton, 2015
Tsonga, ts/tso, 2019
Tswana, tn/tsn, 2014
Turkmen, tk/tuk, 2011
Turkish, tr/tur, 2018
Twi, tw/twi, 2023
Italian, it/ita, 0920
Polish, pl/pol, 1612
Japanese, ja/jpn, 1001
Javanese, jw/jav, 1023
Kalaallisut, kl/kal, 1112
Kannada, kn/kan, 1114
Kashmiri, ks/kas, 1119
Kazakh, kk/kaz, 1111
Khmer, km/khm, 1113
Kinyarwanda, rw/kin, 1823
Kirghiz, ky/kir, 1125
Korean, ko/kor, 1115
Kurdish, ku/kur, 1121
Lao, lo/lao, 1215
Portuguese, pt/por, 1620
Pushto, ps/pus, 1619
Quechua, qu/que, 1721
Rhaeto-Romance, rm/roh, 1813
Rundi, rn/run, 1814
Russian, ru/rus, 1821
Romanian, ro/ron, 1815
Samoan, sm/smo, 1913
Sango, sg/sag, 1907
Sanskrit, sa/san, 1901
Scots-Gaelic, gd/gla, 0704
Serbian, sr/srp, 1918
Serbo-Croatian, sh/scr, 1908
Shona, sn/sna, 1914
Sindhi, sd/snd, 1904
Sinhalese, si/sin, 1909
Ukrainian, uk/ukr, 2111
Urdu, ur/urd, 2118
Uzbek, uz/uzb, 2126
Vietnamese, vi/vie, 2209
Volapük, vo/vol, 2215
Welsh, cy/cym, 0325
Wolof, wo/wol, 2315
Xhosa, xh/xho, 2408
Yiddish, ji/yid, 1009
Yoruba, yo/yor, 2515
Zulu, zu/zul, 2621
Latin, la/lat, 1201
Latvian, lv/lav, 1222
Lingala, ln/lin, 1214
Lithuanian, lt/lit, 1220
Country/Area Code Table
Country/Area name, Country/Area code, input code
Anguilla, ai, 0109
Antigua and Barbuda, ag, 0107
Argentina, ar, 0118
Armenia, am, 0113
Australia, au, 0121
Austria, at, 0120
Azerbaijan, az, 0126
Bahamas, bs, 0219
Barbados, bb, 0202
Belarus, by, 0225
Belgium, be, 0205
Belize, bz, 0226
Dominican Republic, do, 0415
Liechtenstein, li, 1209
Lithuania, lt, 1220
Luxembourg, lu, 1221
Macedonia, the Former Yugoslav
Republic of, mk, 1311
Malaysia, my, 1325
Malta, mt, 1320
Mexico, mx, 1324
Moldova, Republic of, md, 1304
Monaco, mc, 1303
San Marino, sm, 1913
Singapore, sg, 1907
Slovakia, sk, 1911
Estonia, ee, 0505
Finland, fi, 0609
France, fr, 0618
Slovenia, si, 1909
Georgia, ge, 0705
Germany, de, 0405
Greece, gr, 0718
Greenland, gl, 0712
Grenada, gd, 0704
Guyana, gy, 0725
Haiti, ht, 0820
Hong Kong, hk, 0811
Hungary, hu, 0821
Iceland, is, 0919
India, in, 0914
Indonesia, id, 0904
Ireland, ie, 0905
Israel, il, 0912
Italy, it, 0920
Jamaica, jm, 1013
Japan, jp, 1016
Spain, es, 0519
Suriname, sr, 1918
Sweden, se, 1905
Switzerland, ch, 0308
Taiwan, Province of China, tw, 2023
Tajikistan, tj, 2010
Montserrat, ms, 1319
Netherlands, nl, 1412
New Zealand, nz, 1426
Norway, no, 1415
Thailand, th, 2008
Trinidad and Tobago, tt, 2020
Tunisia, tn, 2014
Bermuda, bm, 0213
Brazil, br, 0218
Bulgaria, bg, 0207
Canada, ca, 0301
Turkey, tr, 2018
Pakistan, pk, 1611
Peru, pe, 1605
Turkmenistan, tm, 2013
Turks and Caicos Islands, tc, 2003
Ukraine, ua, 2101
Cayman Islands, ky, 1125
Chile, cl, 0312
Philippines, ph, 1608
Poland, pl, 1612
United Kingdom, gb, 0702
United States, us, 2119
Uruguay, uy, 2125
Uzbekistan, uz, 2126
Venezuela, ve, 2205
Virgin Islands, British, vg, 2207
China, cn, 0314
Portugal, pt, 1620
Colombia, co, 0315
Croatia, hr, 0818
Puerto Rico, pr, 1618
Romania, ro, 1815
Cyprus, cy, 0325
Kazakhstan, kz, 1126
Korea, Republic of, kr, 1118
Kyrgyzstan, kg, 1107
Latvia, lv, 1222
Russian Federation, ru, 1821
Saint Kitts and Nevis, kn, 1114
Saint Lucia, lc, 1203
Saint Vincent and the Grenadines, vc, 2203
Czech Republic, cz, 0326
Denmark, dk, 0411
Dominica, dm, 0413
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
07
Additional information
Original SSLeay License
Copyright © 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young
Licenses
([email protected]). The implementation was written so as to conform with
Netscapes SSL.
The licenses for the software used on this player are shown below.
This library is free for commercial and non-commercial use as long as the following
conditions are aheared to. The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The
SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson ([email protected]).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are
not to be removed. If this package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used. This can be in the form of
a textual message at program startup or in documentation (online or textual)
provided with the package.
libxml2
The MIT License
Copyright © <year> <copyright holders>
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the “Software”), to deal in the
Software without restriction, including without limitation the rights to use, copy,
modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to do so, subject to the
following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
1. Redistributions of source code must retain the copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement: “This product includes cryptographic
software written by Eric Young ([email protected])”
The word ‘cryptographic’ can be left out if the rouines from the library being
used are not cryptographic related :-).
OpenSSL
4. If you include any Windows specific code (or a derivative thereof) from the
apps directory (application code) you must include an acknowledgement:
“This product includes software written by Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the
OpenSSL License and the original SSLeay license apply to the toolkit.
See below for the actual license texts. Actually both licenses are BSD-style Open
Source licenses. In case of any license issues related to OpenSSL please contact
OpenSSL License
Copyright © 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment: “This product includes software
developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://
www.openssl.org/)”
The licence and distribution terms for any publically available version or derivative
of this code cannot be changed. i.e. this code cannot simply be copied and put
under another distribution licence [including the GNU Public Licence.]
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to
endorse or promote products derived from this software without prior written
permission. For written permission, please contact openssl-
zlib
5. Products derived from this software may not be called “OpenSSL” nor may
“OpenSSL” appear in their names without prior written permission of the
OpenSSL Project.
FreeType2
The FreeType Project LICENSE
2006-Jan-27 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and
Werner Lemberg
Introduction
6. Redistributions of any form whatsoever must retain the following
acknowledgment: “This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The FreeType Project is distributed in several archive packages; some of them may
contain, in addition to the FreeType font engine, various tools and contributions
which rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under
their own explicit license. The license affects thus the FreeType font engine, the test
programs, documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group)
licenses, which all encourage inclusion and use of free software in commercial
and freeware products alike. As a consequence, its main points are that:
•
•
•
We don’t promise that this software works. However, we will be interested in
any kind of bug reports.(‘as is’ distribution)
You can use this software for whatever you want, in parts or full form, without
having to pay us.(‘royalty-free’ usage)
You may not pretend that you wrote this software. If you use it, or only parts of
it, in a program, you must acknowledge somewhere in your documentation
that you have used the FreeType code.(‘credits’)
This product includes cryptographic software written by Eric Young
([email protected]).This product includes software written by Tim Hudson
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
We specifically permit and encourage the inclusion of this software, with or
without modifications, in commercial products. We disclaim all warranties
covering The FreeType Project and assume no liability related to The FreeType
Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in
compliance with this license. We thus encourage you to use the following text:
Portions of this software are copyright © <year> The FreeType Project
libpng
07
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following this
sentence.
libpng versions 1.2.6, August 15, 2004, through 1.2.26, April 2, 2008, are Copyright
© 2004, 2006-2008 Glenn Randers-Pehrson, and are distributed according to the
same disclaimer and license as libpng-1.2.5 with the following individual added to
the list of Contributing Authors
Please replace <year> with the value from the FreeType version you actually use.
Legal Terms
0. Definitions
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright ©
2000-2002 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following individuals added to the
list of Contributing Authors
Throughout this license, the terms ‘package’, ‘FreeType Project’, and
‘FreeType archive’ refer to the set of files originally distributed by the authors
(David Turner, Robert Wilhelm, and Werner Lemberg) as the ‘FreeType
Project’, be they named as alpha, beta or final release.
‘You’ refers to the licensee, or person using the project, where ‘using’ is a
generic term including compiling the project’s source code as well as linking
it to form a ‘program’ or ‘executable’. This program is referred to as ‘a program
using the FreeType engine’.
This license applies to all files distributed in the original FreeType Project,
including all source code, binaries and documentation, unless otherwise
stated in the file in its original, unmodified form as distributed in the original
archive. If you are unsure whether or not a particular file is covered by this
license, you must contact us to verify this.
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the library or
against infringement. There is no warranty that our efforts or the library will
fulfill any of your particular purposes or needs. This library is provided with all
faults, and the entire risk of satisfactory quality, performance, accuracy, and
effort is with the user.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright ©
1998, 1999 Glenn Randers-Pehrson, and are distributed according to the same
disclaimer and license as libpng-0.96, with the following individuals added to the
list of Contributing Authors:
The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert
Wilhelm, and Werner Lemberg. All rights reserved except as specified below.
1. No Warranty
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
THE FREETYPE PROJECT IS PROVIDED ‘AS IS’ WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE
INABILITY TO USE, OF THE FREETYPE PROJECT.
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996,
1997 Andreas Dilger Distributed according to the same disclaimer and license as
libpng-0.88, with the following individuals added to the list of Contributing Authors:
John Bowler
2. Redistribution
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
This license grants a worldwide, royalty-free, perpetual and irrevocable right
and license to use, execute, perform, compile, display, copy, create derivative
works of, distribute and sublicense the FreeType Project (in both source and
object code forms) and derivative works thereof for any purpose; and to
authorize others to exercise some or all of the rights granted herein, subject to
the following conditions:
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995,
1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, “Contributing Authors” is defined as
the following set of individuals:
•
Redistribution of source code must retain this license file (‘FTL.TXT’)
unaltered; any additions, deletions or changes to the original files must
be clearly indicated in accompanying documentation. The copyright
notices of the unaltered, original files must be preserved in all copies of
source files.
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
•
Redistribution in binary form must provide a disclaimer that states that
the software is based in part of the work of the FreeType Team, in the
distribution documentation. We also encourage you to put an URL to the
FreeType web page in your documentation, though this isn’t mandatory.
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and
Group 42, Inc. disclaim all warranties, expressed or implied, including, without
limitation, the warranties of merchantability and of fitness for any purpose. The
Contributing Authors and Group 42, Inc. assume no liability for direct, indirect,
incidental, special, exemplary, or consequential damages, which may result from
the use of the PNG Reference Library, even if advised of the possibility of such
damage.
Permission is hereby granted to use, copy, modify, and distribute this source code,
or portions hereof, for any purpose, without fee, subject to the following
restrictions:
1. The origin of this source code must not be misrepresented.
2. Altered versions must be plainly marked as such and must not be
misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source or
altered source distribution.
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and
encourage the use of this source code as a component to supporting the PNG file
format in commercial products. If you use this source code in a product,
acknowledgment is not required but would be appreciated.
A “png_get_copyright” function is available, for convenient use in “about” boxes
and the like: printf(“%s”,png_get_copyright(NULL));Also, the PNG logo (in PNG
format, of course) is supplied in the files “pngbar.png” and “pngbar.jpg (88x31) and
“pngnow.png” (98x31).
These conditions apply to any software derived from or based on the FreeType
Project, not just the unmodified files. If you use our work, you must
acknowledge us. However, no fee need be paid to us.
3. Advertising
Neither the FreeType authors and contributors nor you shall use the name of
the other for commercial, advertising, or promotional purposes without
specific prior written permission.
We suggest, but do not require, that you use one or more of the following
phrases to refer to this software in your documentation or advertising
materials: ‘FreeType Project’, ‘FreeType Engine’, ‘FreeType library’, or
‘FreeType Distribution’.
As you have not signed this license, you are not required to accept it. However,
as the FreeType Project is copyrighted material, only this license, or another
one contracted with the authors, grants you the right to use, distribute, and
modify it. Therefore, by using, distributing, or modifying the FreeType Project,
you indicate that you understand and accept all the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
•
Discusses general use and applications of FreeType, as well as future and
wanted additions to the library and distribution. If you are looking for
support, start in this list if you haven’t found anything to help you in the
documentation.
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a
certification mark of the Open Source Initiative.
Glenn Randers-Pehrson
•
Discusses bugs, as well as engine internals, design issues, specific
licenses, porting, etc.
Our home page can be found at
glennrp at users.sourceforge.net
2-Apr-08
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
We welcome the use of this software as a component of commercial products. No
royalty is required, but we do ask for an acknowledgement in product
documentation, as described under LEGAL ISSUES.
libjpg
07
The Independent JPEG Group’s JPEG software
README for release 6b of 27-Mar-1998
LEGAL ISSUES
This distribution contains the sixth public release of the Independent JPEG Group’s
free JPEG software. You are welcome to redistribute this software and to use it for
any purpose, subject to the conditions under LEGAL ISSUES, below.
Serious users of this software (particularly those incorporating it into larger
programs) should contact IJG at [email protected] to be added to our
electronic mailing list. Mailing list members are notified of updates and have a
chance to participate in technical discussions, etc.
This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, Lee Crocker,
Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Guido Vollbeding, Ge’
Weijers, and other members of the Independent JPEG Group.
IJG is not affiliated with the official ISO JPEG standards committee.
DOCUMENTATION ROADMAP
In plain English:
1. We don’t promise that this software works. (But if you find any bugs, please let
us know!)
2. You can use this software for whatever you want. You don’t have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program,
you must acknowledge somewhere in your documentation that you’ve used
the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied,
with respect to this software, its quality, accuracy, merchantability, or fitness for a
particular purpose. This software is provided “AS IS”, and you, its user, assume the
entire risk as to its quality and accuracy.
This software is copyright © 1991-1998, Thomas G. Lane. All Rights Reserved
except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or
portions thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this
README file must be included, with this copyright and no-warranty notice
unaltered; and any additions, deletions, or changes to the original files must
be clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation
must state that “this software is based in part on the work of the Independent
JPEG Group”.
This file contains the following sections:
OVERVIEW
LEGAL ISSUES
REFERENCES
ARCHIVE LOCATIONS
RELATED SOFTWARE
FILE FORMAT WARS
TO DO
General description of JPEG and the IJG software.
Copyright, lack of warranty, terms of distribution.
Where to learn more about JPEG.
Where to find newer versions of this software.
Other stuff you should get.
Software *not* to get.
Plans for future IJG releases.
Other documentation files in the distribution are:
User documentation:
install.doc
usage.doc
How to configure and install the IJG software.
Usage instructions for cjpeg, djpeg, jpegtran, rdjpgcom,
and wrjpgcom.
(3) Permission for use of this software is granted only if the user accepts full
responsibility for any undesirable consequences; the authors accept NO
LIABILITY for damages of any kind.
*.1 Unix-style man pages for programs (same info as usage.doc).
wizard.doc
change.log
Advanced usage instructions for JPEG wizards only.
Version-to-version change highlights.
These conditions apply to any software derived from or based on the IJG code, not
just to the unmodified library. If you use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author's name or company name
in advertising or publicity relating to this software or products derived from it. This
software may be referred to only as “the Independent JPEG Group's software”.
We specifically permit and encourage the use of this software as the basis of
commercial products, provided that all warranty or liability claims are assumed by
the product vendor.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole
proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
ansi2knr.c is NOT covered by the above copyright and conditions, but instead by
the usual distribution terms of the Free Software Foundation; principally, that you
must include source code if you redistribute it. (See the file ansi2knr.c for full
details.) However, since ansi2knr.c is not needed as part of any program generated
from the IJG code, this does not limit you more than the foregoing paragraphs do.
The Unix configuration script “configure” was produced with GNU Autoconf. It is
copyright by the Free Software Foundation but is freely distributable. The same
holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh).
Another support script, install-sh, is copyright by M.I.T. but is also freely
distributable.
It appears that the arithmetic coding option of the JPEG spec is covered by patents
owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be
used without obtaining one or more licenses. For this reason, support for
arithmetic coding has been removed from the free JPEG software. (Since
arithmetic coding provides only a marginal gain over the unpatented Huffman
mode, it is unlikely that very many implementations will support it.) So far as we are
aware, there are no patent restrictions on the remaining code.
The IJG distribution formerly included code to read and write GIF files. To avoid
entanglement with the Unisys LZW patent, GIF reading support has been removed
altogether, and the GIF writer has been simplified to produce uncompressed GIFs.
This technique does not use the LZW algorithm; the resulting GIF files are larger
than usual, but are readable by all standard GIF decoders.
Programmer and internal documentation:
libjpeg.doc
example.c
structure.doc
filelist.doc
How to use the JPEG library in your own programs.
Sample code for calling the JPEG library.
Overview of the JPEG library’s internal structure.
Road map of IJG files.
coderules.doc
Coding style rules --- please read if you contribute code.
Please read at least the files install.doc and usage.doc. Useful information can also
be found in the JPEG FAQ (Frequently Asked Questions) article. See ARCHIVE
LOCATIONS below to find out where to obtain the FAQ article.
If you want to understand how the JPEG code works, we suggest reading one or
more of the REFERENCES, then looking at the documentation files (in roughly the
order listed) before diving into the code.
OVERVIEW
This package contains C software to implement JPEG image compression and
decompression. JPEG (pronounced “jay-peg”) is a standardized compression
method for full-color and gray-scale images. JPEG is intended for compressing
real-world scenes; line drawings, cartoons and other non-realistic images are not
its strong suit. JPEG is lossy, meaning that the output image is not exactly identical
to the input image. Hence you must not use JPEG if you have to have identical
output bits. However, on typical photographic images, very good compression
levels can be obtained with no visible change, and remarkably high compression
levels are possible if you can tolerate a low-quality image. For more details, see the
references, or just experiment with various compression settings.
This software implements JPEG baseline, extended-sequential, and progressive
compression processes. Provision is made for supporting all variants of these
processes, although some uncommon parameter settings aren’t implemented yet.
For legal reasons, we are not distributing code for the arithmetic-coding variants of
JPEG; see LEGAL ISSUES. We have made no provision for supporting the
hierarchical or lossless processes defined in the standard.
We provide a set of library routines for reading and writing JPEG image files, plus
two sample applications “cjpeg” and “djpeg”, which use the library to perform
conversion between JPEG and some other popular image file formats. The library
is intended to be reused in other applications.
We are required to state that
“The Graphics Interchange Format(c) is the Copyright property of CompuServe
Incorporated. GIF(sm) is a Service Mark property of CompuServe
Incorporated.”
In order to support file conversion and viewing software, we have included
considerable functionality beyond the bare JPEG coding/decoding capability; for
example, the color quantization modules are not strictly part of JPEG decoding, but
they are essential for output to colormapped file formats or colormapped displays.
These extra functions can be compiled out of the library if not required for a
particular application. We have also included jpegtran, a utility for lossless
transcoding between different JPEG processes, and “rdjpgcom” and “wrjpgcom”,
two simple applications for inserting and extracting textual comments in JFIF files.
The emphasis in designing this software has been on achieving portability and
flexibility, while also making it fast enough to be useful. In particular, the software
is not intended to be read as a tutorial on JPEG. (See the REFERENCES section for
introductory material.) Rather, it is intended to be reliable, portable, industrial-
strength code. We do not claim to have achieved that goal in every aspect of the
software, but we strive for it.
REFERENCES
We highly recommend reading one or more of these references before trying to
understand the innards of the JPEG software.
The best short technical introduction to the JPEG compression algorithm is
Wallace, Gregory K. “The JPEG Still Picture Compression Standard”,
Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
(Adjacent articles in that issue discuss MPEG motion picture compression,
applications of JPEG, and related topics.) If you don’t have the CACM issue handy,
a PostScript file containing a revised version of Wallace’s article is available at ftp:/
/ftp.uu.net/graphics/jpeg/wallace.ps.gz. The file (actually a preprint for an article
that appeared in IEEE Trans. Consumer Electronics) omits the sample images that
appeared in CACM, but it includes corrections and some added material. Note: the
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Wallace article is copyright ACM and IEEE, and it may not be used for commercial
purposes.
Numerous viewing and image manipulation programs now support JPEG. (Quite a
few of them use this library to do so.) The JPEG FAQ described above lists some of
the more popular free and shareware viewers, and tells where to obtain them on
Internet.
If you are on a Unix machine, we highly recommend Jef Poskanzer’s free
PBMPLUS software, which provides many useful operations on PPM-format image
files. In particular, it can convert PPM images to and from a wide range of other
formats, thus making cjpeg/djpeg considerably more useful. The latest version is
distributed by the NetPBM group, and is available from numerous sites, notably
PBMPLUS/NETPBM is not nearly as portable as the IJG software is; you are likely
to have difficulty making it work on any non-Unix machine.
A different free JPEG implementation, written by the PVRG group at Stanford, is
research and experimentation rather than production use; it is slower, harder to
use, and less portable than the IJG code, but it is easier to read and modify. Also,
the PVRG code supports lossless JPEG, which we do not. (On the other hand, it
doesn’t do progressive JPEG.)
07
A somewhat less technical, more leisurely introduction to JPEG can be found in
The Data Compression Book by Mark Nelson and Jean-loup Gailly, published by
M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides good
explanations and example C code for a multitude of compression methods
including JPEG. It is an excellent source if you are comfortable reading C code but
don’t know much about data compression in general. The book’s JPEG sample
code is far from industrial-strength, but when you are ready to look at a full
implementation, you’ve got one here...
The best full description of JPEG is the textbook “JPEG Still Image Data
Compression Standard” by William B. Pennebaker and Joan L. Mitchell, published
by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. The
book includes the complete text of the ISO JPEG standards (DIS 10918-1 and draft
DIS 10918-2). This is by far the most complete exposition of JPEG in existence, and
we highly recommend it.
The JPEG standard itself is not available electronically; you must order a paper copy
through ISO or ITU. (Unless you feel a need to own a certified official copy, we
recommend buying the Pennebaker and Mitchell book instead; it’s much cheaper
and includes a great deal of useful explanatory material.) In the USA, copies of the
standard may be ordered from ANSI Sales at (212) 642-4900, or from Global
Engineering Documents at (800) 854-7179. (ANSI doesn’t take credit card orders,
but Global does.) It’s not cheap: as of 1992, ANSI was charging $95 for Part 1 and
$47 for Part 2, plus 7% shipping/handling. The standard is divided into two parts,
Part 1 being the actual specification, while Part 2 covers compliance testing
methods. Part 1 is titled “Digital Compression and Coding of Continuous-tone Still
Images, Part 1: Requirements and guidelines” and has document numbers ISO/
IEC IS 10918-1, ITU-T T.81. Part 2 is titled “Digital Compression and Coding of
Continuous-tone Still Images, Part 2: Compliance testing” and has document
numbers ISO/IEC IS 10918-2, ITU-T T.83.
FILE FORMAT WARS
Some JPEG programs produce files that are not compatible with our library. The
root of the problem is that the ISO JPEG committee failed to specify a concrete file
format. Some vendors “filled in the blanks” on their own, creating proprietary
formats that no one else could read. (For example, none of the early commercial
JPEG implementations for the Macintosh were able to exchange compressed files.)
The file format we have adopted is called JFIF (see REFERENCES). This format has
been agreed to by a number of major commercial JPEG vendors, and it has become
the de facto standard. JFIF is a minimal or “low end” representation. We
recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF Technical
Note #2) for “high end” applications that need to record a lot of additional data
about an image. TIFF/JPEG is fairly new and not yet widely supported,
unfortunately.
The upcoming JPEG Part 3 standard defines a file format called SPIFF. SPIFF is
interoperable with JFIF, in the sense that most JFIF decoders should be able to read
the most common variant of SPIFF. SPIFF has some technical advantages over
JFIF, but its major claim to fame is simply that it is an official standard rather than
an informal one. At this point it is unclear whether SPIFF will supersede JFIF or
whether JFIF will remain the de-facto standard. IJG intends to support SPIFF once
the standard is frozen, but we have not decided whether it should become our
default output format or not. (In any case, our decoder will remain capable of
reading JFIF indefinitely.)
Some extensions to the original JPEG standard are defined in JPEG Part 3, a newer
ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG currently does not
support any Part 3 extensions.
The JPEG standard does not specify all details of an interchangeable file format.
For the omitted details we follow the “JFIF” conventions, revision 1.02. A copy of the
JFIF spec is available from:
Literature Department
C-Cube Microsystems, Inc.
1778 McCarthy Blvd.
Milpitas, CA 95035
phone (408) 944-6300, fax (408) 944-6314
Various proprietary file formats incorporating JPEG compression also exist. We
have little or no sympathy for the existence of these formats. Indeed, one of the
original reasons for developing this free software was to help force convergence on
common, open format standards for JPEG files. Don’t use a proprietary file format!
TO DO
The major thrust for v7 will probably be improvement of visual quality. The current
method for scaling the quantization tables is known not to be very good at low Q
values. We also intend to investigate block boundary smoothing, “poor man’s
variable quantization”, and other means of improving quality-vs-file-size
performance without sacrificing compatibility.
graphics/jpeg/jfif.txt.gz, but it is missing the figures.
graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme found in the TIFF 6.0
spec of 3-June-92 has a number of serious problems. IJG does not recommend use
of the TIFF 6.0 design (TIFF Compression tag 6). Instead, we recommend the JPEG
design proposed by TIFF Technical Note #2 (Compression tag 7). Copies of this
expected that the next revision of the TIFF spec will replace the 6.0 JPEG design
with the Note's design. Although IJG's own code does not support TIFF/JPEG, the
free libtiff library uses our library to implement TIFF/JPEG per the Note. libtiff is
In future versions, we are considering supporting some of the upcoming JPEG Part
3 extensions --- principally, variable quantization and the SPIFF file format.
As always, speeding things up is of great interest.
Please send bug reports, offers of help, etc. to [email protected].
ARCHIVE LOCATIONS
The “official” archive site for this software is ftp.uu.net (Internet address
192.48.96.9). The most recent released version can always be found there in
graphics/jpeg/jpegsrc.v6b.tar.gz. If you don’t have direct Internet access, UUNET’s
archives are also available via UUCP; contact [email protected] for information
on retrieving files that way.
libupnp
Copyright (c) 2000-2003 Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
*
Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
Numerous Internet sites maintain copies of the UUNET files. However, only
ftp.uu.net is guaranteed to have the latest official version.
*
Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
You can also obtain this software in DOS-compatible “zip” archive format from the
CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 JPEG
Tools. Again, these versions may sometimes lag behind the ftp.uu.net release.
The JPEG FAQ (Frequently Asked Questions) article is a useful source of general
information about JPEG. It is updated constantly and therefore is not included in
this distribution. The FAQ is posted every two weeks to Usenet newsgroups
comp.graphics.misc, news.answers, and other groups. It is available on the World
sites, including the official news.answers archive at rtfm.mit.edu: ftp://
rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. If you don't have Web or FTP
access, send e-mail to [email protected] with body
*
Neither name of Intel Corporation nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS
“AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
send usenet/news.answers/jpeg-faq/part1
send usenet/news.answers/jpeg-faq/part2
RELATED SOFTWARE
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
You may charge a fee for the physical act of transferring a copy, and you may
at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus
forming a work based on the Program, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
07
AVC/H.264
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE
FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)
ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (”AVC VIDEO”)
AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. No
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://MPEGLA.COM.
a) You must cause the modified files to carry prominent notices stating that
you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or
in part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when
run, you must cause it, when started running for such interactive use in
the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users may redistribute
the program under these conditions, and telling the user how to view a
copy of this License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable
sections of that work are not derived from the Program, and can be reasonably
considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be
on the terms of this License, whose permissions for other licensees extend to
the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with
the Program (or with a work based on the Program) on a volume of a storage
or distribution medium does not bring the other work under the scope of this
License.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share
and change it. By contrast, the GNU General Public License is intended to
guarantee your freedom to share and change free software - to make sure the
software is free for all its users. This General Public License applies to most of the
Free Software Foundation’s software and to any other program whose authors
commit to using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to your programs,
too.
When we speak of free software, we are referring to freedom, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute
copies of free software (and charge for this service if you wish), that you receive
source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you
these rights or to ask you to surrender the rights. These restrictions translate to
certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee,
you must give the recipients all the rights that you have. You must make sure that
they, too, receive or can get the source code. And you must show them these terms
so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you
this license which gives you legal permission to copy, distribute and/or modify the
software.
Also, for each author's protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is
modified by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not
reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to
avoid the danger that redistributors of a free program will individually obtain patent
licenses, in effect making the program proprietary. To prevent this, we have made
it clear that any patent must be licensed for everyone’s free use or not licensed at
all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The “Program”, below, refers to any such program
or work, and a “work based on the Program” means either the Program or any
derivative work under copyright law: that is to say, a work containing the
Program or a portion of it, either verbatim or with modifications and/or
translated into another language. (Hereinafter, translation is included without
limitation in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by
running the Program). Whether that is true depends on what the Program
does.
3. You may copy and distribute the Program (or a work based on it, under Section
2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections 1
and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any
third party, for a charge no more than your cost of physically performing
source distribution, a complete machine-readable copy of the
corresponding source code, to be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange;
or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for
noncommercial distribution and only if you received the program in
object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means all
the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and installation of
the executable. However, as a special exception, the source code distributed
need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the source
code from the same place counts as distribution of the source code, even
though third parties are not compelled to copy the source along with the
object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if you do
not accept this License. Therefore, by modifying or distributing the Program
(or any work based on the Program), you indicate your acceptance of this
1. You may copy and distribute verbatim copies of the Program’s source code as
you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and
to the absence of any warranty; and give any other recipients of the Program
a copy of this License along with the Program.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
License to do so, and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
How to Apply These Terms to Your New Programs
07
If you develop a new program, and you want it to be of the greatest possible use to
the public, the best way to achieve this is to make it free software which everyone
can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to
the start of each source file to most effectively convey the exclusion of warranty;
and each file should have at least the “copyright” line and a pointer to where the
full notice is found.
6. Each time you redistribute the Program (or any work based on the Program),
the recipient automatically receives a license from the original licensor to
copy, distribute or modify the Program subject to these terms and conditions.
You may not impose any further restrictions on the recipients’ exercise of the
rights granted herein.
You are not responsible for enforcing compliance by third parties to this
License.
<one line to give the program's name and a brief idea of what it does.>
Copyright © <year> <name of author>
7. If, as a consequence of a court judgment or allegation of patent infringement
or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all. For example, if a
patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
This program is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software
Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply and
the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or
other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software
distribution system, which is implemented by public license practices. Many
people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in
an interactive mode:
Gnomovision version 69, Copyright © year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show
w’. This is free software, and you are welcome to redistribute it under certain
conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate
parts of the General Public License. Of course, the commands you use may be
called something other than ‘show w’ and ‘show c’; they could even be mouse-
clicks or menu items - whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the program, if necessary. Here is a
sample; alter the names:
8. If the distribution and/or use of the Program is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems
or concerns.
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
‘Gnomovision’ (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may consider it
more useful to permit linking proprietary applications with the library. If this is what
you want to do, use the GNU Lesser General Public License instead of this License.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and “any later
version”, you have the option of following the terms and conditions either of
that version or of any later version published by the Free Software Foundation.
If the Program does not specify a version number of this License, you may
choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose
distribution conditions are different, write to the author to ask for permission.
For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of
software generally.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright © 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor
of the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share
and change it. By contrast, the GNU General Public Licenses are intended to
guarantee your freedom to share and change free software - to make sure the
software is free for all its users. This license, the Lesser General Public License,
applies to some specially designated software packages - typically libraries - of the
Free Software Foundation and other authors who decide to use it. You can use it
too, but we suggest you first think carefully about whether this license or the
ordinary General Public License is the better strategy to use in any particular case,
based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our
General Public Licenses are designed to make sure that you have the freedom to
distribute copies of free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can change the software
and use pieces of it in new free programs; and that you are informed that you can
do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny
you these rights or to ask you to surrender these rights. These restrictions translate
to certain responsibilities for you if you distribute copies of the library or if you
modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you
must give the recipients all the rights that we gave you. You must make sure that
they, too, receive or can get the source code. If you link other code with the library,
you must provide complete object files to the recipients, so that they can relink
them with the library after making changes to the library and recompiling it. And
you must show them these terms so they know their rights. We protect your rights
with a two-step method: (1) we copyright the library, and (2) we offer you this
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM
TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR
OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
61
En
END OF TERMS AND CONDITIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
license, which gives you legal permission to copy, distribute and/or modify the
library.
You may charge a fee for the physical act of transferring a copy, and you may
at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus
forming a work based on the Library, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that you
also meet all of these conditions:
07
To protect each distributor, we want to make it very clear that there is no warranty
for the free library. Also, if the library is modified by someone else and passed on,
the recipients should know that what they have is not the original version, so that
the original author’s reputation will not be affected by problems that might be
introduced by others.
a) The modified work must itself be a software library.
Finally, software patents pose a constant threat to the existence of any free
program. We wish to make sure that a company cannot effectively restrict the
users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the library
must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU
General Public License. This license, the GNU Lesser General Public License,
applies to certain designated libraries, and is quite different from the ordinary
General Public License. We use this license for certain libraries in order to permit
linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library,
the combination of the two is legally speaking a combined work, a derivative of the
original library. The ordinary General Public License therefore permits such linking
only if the entire combination fits its criteria of freedom. The Lesser General Public
License permits more lax criteria for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to
protect the user's freedom than the ordinary General Public License. It also
provides other free software developers Less of an advantage over competing non-
free programs. These disadvantages are the reason we use the ordinary General
Public License for many libraries. However, the Lesser license provides advantages
in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the
widest possible use of a certain library, so that it becomes a de-facto standard. To
achieve this, non-free programs must be allowed to use the library. A more
frequent case is that a free library does the same job as widely used non-free
libraries. In this case, there is little to gain by limiting the free library to free software
only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables
a greater number of people to use a large body of free software. For example,
permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU
Linux operating system.
b) You must cause the files modified to carry prominent notices stating that
you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all
third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a table of data to
be supplied by an application program that uses the facility, other than as
an argument passed when the facility is invoked, then you must make a
good faith effort to ensure that, in the event an application does not
supply such function or table, the facility still operates, and performs
whatever part of its purpose remains meaningful. (For example, a
function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application. Therefore, Subsection 2d
requires that any application-supplied function or table used by this
function must be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable
sections of that work are not derived from the Library, and can be reasonably
considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole
which is a work based on the Library, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with
the Library (or with a work based on the Library) on a volume of a storage or
distribution medium does not bring the other work under the scope of this
License.
3. You may opt to apply the terms of the ordinary GNU General Public License
instead of this License to a given copy of the Library. To do this, you must alter
all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has appeared, then
you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the
ordinary GNU General Public License applies to all subsequent copies and
derivative works made from that copy. This option is useful when you wish to
copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under
Section 2) in object code or executable form under the terms of Sections 1 and
2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software
interchange.
Although the Lesser General Public License is Less protective of the users’
freedom, it does ensure that the user of a program that is linked with the Library
has the freedom and the wherewithal to run that program using a modified version
of the Library.
The precise terms and conditions for copying, distribution and modification follow.
Pay close attention to the difference between a “work based on the library” and a
“work that uses the library”. The former contains code derived from the library,
whereas the latter must be combined with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program
which contains a notice placed by the copyright holder or other authorized
party saying it may be distributed under the terms of this Lesser General
Public License (also called “this License”). Each licensee is addressed as
“you”.
A “library” means a collection of software functions and/or data prepared so
as to be conveniently linked with application programs (which use some of
those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has
been distributed under these terms. A “work based on the Library” means
either the Library or any derivative work under copyright law: that is to say, a
work containing the Library or a portion of it, either verbatim or with
modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term
“modification”.)
“Source code” for a work means the preferred form of the work for making
modifications to it. For a library, complete source code means all the source
code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by
this License; they are outside its scope. The act of running a program using
the Library is not restricted, and output from such a program is covered only
if its contents constitute a work based on the Library (independent of the use
of the Library in a tool for writing it). Whether that is true depends on what the
Library does and what the program that uses the Library does.
If distribution of object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source code
from the same place satisfies the requirement to distribute the source code,
even though third parties are not compelled to copy the source along with the
object code.
5. A program that contains no derivative of any portion of the Library, but is
designed to work with the Library by being compiled or linked with it, is called
a “work that uses the Library”. Such a work, in isolation, is not a derivative work
of the Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an
executable that is a derivative of the Library (because it contains portions of
the Library), rather than a “work that uses the library”. The executable is
therefore covered by this License. Section 6 states terms for distribution of
such executables.
When a “work that uses the Library” uses material from a header file that is
part of the Library, the object code for the work may be a derivative work of the
Library even though the source code is not. Whether this is true is especially
significant if the work can be linked without the Library, or if the work is itself
a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts
and accessors, and small macros and small inline functions (ten lines or less
in length), then the use of the object file is unrestricted, regardless of whether
it is legally a derivative work. (Executables containing this object code plus
portions of the Library will still fall under Section 6.)
1. You may copy and distribute verbatim copies of the Library’s complete source
code as you receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and
to the absence of any warranty; and distribute a copy of this License along with
the Library.
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Otherwise, if the work is a derivative of the Library, you may distribute the
object code for the work under the terms of Section 6. Any executables
containing that work also fall under Section 6, whether or not they are linked
directly with the Library itself.
exercise of the rights granted herein. You are not responsible for enforcing
compliance by third parties with this License.
07
11. If, as a consequence of a court judgment or allegation of patent infringement
or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a
consequence you may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by all those
who receive copies directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain entirely from
distribution of the Library. If any portion of this section is held invalid or
unenforceable under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to apply in other
circumstances.
6. As an exception to the Sections above, you may also combine or link a “work
that uses the Library” with the Library to produce a work containing portions
of the Library, and distribute that work under terms of your choice, provided
that the terms permit modification of the work for the customer's own use and
reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is
used in it and that the Library and its use are covered by this License. You must
supply a copy of this License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library among them, as
well as a reference directing the user to the copy of this License. Also, you
must do one of these things:
a) Accompany the work with the complete corresponding machine-
readable source code for the Library including whatever changes were
used in the work (which must be distributed under Sections 1 and 2
above); and, if the work is an executable linked with the Library, with the
complete machine-readable “work that uses the Library”, as object code
and/or source code, so that the user can modify the Library and then
relink to produce a modified executable containing the modified Library.
(It is understood that the user who changes the contents of definitions
files in the Library will not necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A
suitable mechanism is one that (1) uses at run time a copy of the library
already present on the user’s computer system, rather than copying
library functions into the executable, and (2) will operate properly with a
modified version of the library, if the user installs one, as long as the
modified version is interface-compatible with the version that the work
was made with.
c) Accompany the work with a written offer, valid for at least three years, to
give the same user the materials specified in Subsection 6a, above, for a
charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a
designated place, offer equivalent access to copy the above specified
materials from the same place.
e) Verify that the user has already received a copy of these materials or that
you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must
include any data and utility programs needed for reproducing the executable
from it. However, as a special exception, the materials to be distributed need
not include anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component itself
accompanies the executable.
It may happen that this requirement contradicts the license restrictions of
other proprietary libraries that do not normally accompany the operating
system. Such a contradiction means you cannot use both them and the
Library together in an executable that you distribute.
It is not the purpose of this section to induce you to infringe any patents or
other property right claims or to contest validity of any such claims; this
section has the sole purpose of protecting the integrity of the free software
distribution system which is implemented by public license practices. Many
people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that
system; it is up to the author donor to decide if he or she is willing to distribute
software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the
Lesser General Public License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library specifies
a version number of this License which applies to it and “any later version”,
you have the option of following the terms and conditions either of that version
or of any later version published by the Free Software Foundation. If the Library
does not specify a license version number, you may choose any version ever
published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose
distribution conditions are incompatible with these, write to the author to ask
for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS
WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED
BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE
WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
7. You may place library facilities that are a work based on the Library side-by-
side in a single library together with other library facilities not covered by this
License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities
is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on
the Library, uncombined with any other library facilities. This must be
distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it
is a work based on the Library, and explaining where to find the
accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except
as expressly provided under this License. Any attempt otherwise to copy,
modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Library or its derivative works. These actions are prohibited by law if you do not
accept this License. Therefore, by modifying or distributing the Library (or any
work based on the Library), you indicate your acceptance of this License to do
so, and all its terms and conditions for copying, distributing or modifying the
Library or works based on it.
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the
public, we recommend making it free software that everyone can redistribute and
change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach
them to the start of each source file to most effectively convey the exclusion of
10. Each time you redistribute the Library (or any work based on the Library), the
recipient automatically receives a license from the original licensor to copy,
distribute, link with or modify the Library subject to these terms and
conditions. You may not impose any further restrictions on the recipients'
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
warranty; and each file should have at least the “copyright” line and a pointer to
where the full notice is found.
Do not obstruct the ventilation holes
Do not use the player on a shaggy rug, bed, or sofa, and do not cover
the player with a cloth, etc. Doing so will prevent heat dissipation
and could lead to damage.
07
<one line to give the library’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms
of the GNU Lesser General Public License as published by the Free Software
Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for
more details.
You should have received a copy of the GNU Lesser General Public License along
with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin
Street, Fifth Floor, Boston, MA 02110-1301 USA
Keep away from heat
Do not place the player on top of an amplifier or other device
generating heat. When installing in a rack, to avoid the heat
generated by the amplifier and other devices, place it on a shelf
below the amplifier whenever possible.
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if
any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample;
alter the names:
Turn the power off when not
using the player
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a
library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Depending on the conditions of the TV broadcast signals, striped
patterns may appear on the screen when the TV is turned on while
the player’s power is turned on. This is not a malfunction with the
player or TV. If this happens, turn the player’s power off. In the same
way, noise may be heard in the sound of a radio.
Ty Coon, President of Vice
That’s all there is to it!
[Notice on GNU General Public License]
This product include the software licensed for use under the terms of a GNU
General Public License. A copy of the corresponding source code can be obtained
by being charged the fee for distribution.
To obtain a copy, contact your local Pioneer Customer Support Center.
License.
Condensation
If the player is moved suddenly from a cold place into a warm room
(in winter, for example) or if the temperature in the room in which
the player is installed rises suddenly due to a heater, etc., water
droplets (condensation) may form inside (on operating parts and the
lens). When condensation is present, the player will not operate
properly and playback is not possible. Let the player stand at room
temperature for 1 or 2 hours with the power turned on (the time
depends on the extent of condensation). The water droplets will
dissipate and playback will become possible.
Cautions on use
Moving the player
Condensation can also occur in the summer if the player is exposed
to the direct wind from an air-conditioner. If this happens, move the
player to a different place.
If you need to move this unit, first remove the disc if there’s one
loaded, and close the disc tray. Next, press STANDBY/ON to
switch the power to standby, checking that the POWER OFF
indication on the front panel display goes off. Wait at least 10
seconds. Lastly, disconnect the power cord.
Cleaning the player
Never lift or move the unit during playback — discs rotate at a high
speed and may be damaged.
Normally, wipe the player with a soft cloth. For tough dirt, apply
some neutral detergent diluted in 5 to 6 parts water to a soft cloth,
wring out thoroughly, wipe off the dirt, then wipe again with a dry
cloth.
Place of installation
Note that getting alcohol, thinner, benzene or insecticide on the
player could cause the print and coating to peel off. Also, avoid
leaving rubber or vinyl products in contact with the player for long
periods of time, as this could damage the cabinet.
Select a stable place near the TV and AV system to which the unit is
connected.
Do not place the player on top of a TV or color monitor. Keep it away
from cassette decks or other components easily affected by
magnetism.
When using chemical-impregnated wipes, etc., read the wipe’s
cautions carefully.
Avoid the following types of places:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot or cold places
Unplug the power cord from the power outlet when cleaning the
player.
Caution for when the unit is
installed in a rack with a glass door
• Places subject to vibration
• Dusty places
• Places exposed to soot, steam or heat (in kitchens, etc.)
Do not press the OPEN/CLOSE on the remote control to open the
disc tray while the glass door is closed. The door will hamper the
movement of the disc tray, and the unit could be damaged.
Do not place objects on top
Do not place objects on top of the player.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning discs
Cleaning the pickup lens
07
It may not be possible to play the disc if there are fingerprints or dust
on it. In this case, using a cleaning cloth, etc., to wipe the disc gently
from the center toward the outer edge. Do not use a dirty cleaning
cloth.
The player’s lens should not become dirty in normal use, but if for
some reason it should malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center. Although lens cleaners
for players are commercially available, we advise against using
them since some may damage the lens.
Handling discs
Do not use damaged (cracked or warped) discs.
Do not use benzene, thinner or other volatile chemicals. Also do not
use record spray or antistatic agents.
Do not scratch the disc’s signal surface or let it get dirty.
Do not load more than one disc into the player at a time.
For tough dirt, apply some water to a soft cloth, wring out
thoroughly, wipe off the dirt, then wipe off the moisture with a dry
cloth.
Do not glue paper or put stickers onto the disc, or use a pencil, ball-
point pen or other sharp-tipped writing instrument. These could all
damage the disc.
Specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be
used on this player. Never use such discs, as they will damage the
player.
Storing discs
Always store discs in their cases, and place the cases vertically,
avoiding places exposed to high temperature or humidity, direct
sunlight or extremely low temperatures.
Be sure to read the cautions included with the disc.
Condensation on discs
If the disc is moved suddenly from a cold place into a warm room (in
winter, for example), water droplets (condensation) may form on the
disc surface. Discs will not play properly if there is condensation on
them. Carefully wipe off the water droplets from the disc surface
before using the disc.
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If
the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.
(Telephone lines are open Monday through Friday 6:00 AM to 4:30 PM (Pacific Time).) In Canada, call Local (905) 479-4411, or Long distance
+1(877) 283-5901. (Telephone lines are open Monday through Friday 9:00 AM to 5:30 PM (EST).)
Playback
Problem
Check
Remedy
• Disc does not play.
Is the disc one that is playable on this player?
Check whether the disc is one that can be played on this player
(page 8).
• Disc tray opens
automatically.
Is the file one that is playable on this player?
• Check whether the file is one that can be played on this
player (page 10).
• Check whether or not the file is damaged.
It may not be possible to play scratched discs.
Clean the disc (above).
Is the disc scratched?
Is the disc dirty?
Is there a piece of paper or sticker attached to the disc?
Is the disc properly set in the disc tray?
The disc may be warped and unplayable.
• Set the disc with the printed side facing up.
• Set the disc properly in the depression in the disc tray.
Is the region number correct?
See About region numbers on page 10 for the region numbers
of discs that can be played on this player.
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
No picture is displayed or the Is the video cable properly connected?
picture is not displayed
properly.
• Connect the cable properly according to the connected
devices (page 15).
• Insert the cable firmly and all the way in.
Is the video cable damaged?
If the cable is damaged, replace it with a new one.
Is the input setting on the connected TV or AV receiver or
amplifier right?
Read the operating instructions of the connected components
and switch to the proper input.
Are you viewing the picture from the video output terminal
selected with VIDEO SELECT?
Press VIDEO SELECT to switch the video output terminal to be
viewed (page 25).
If Pure Audio is set to Mode 2, video signals are only output
from the selected output terminal (page 53).
Is the output video resolution properly set?
Use OUTPUT RESOLUTION to switch to a resolution at which
the video and audio signals are output (page 25).
• Is the player connected with an HDMI cable other than a
High Speed HDMI™ cable (with a Standard HDMI™ cable)?
1080p or Deep Color video signals may not be output properly,
depending on the HDMI cable being used or the player’s
settings. Press while pressing on the player’s front panel
to restore the video outputs to the factory default settings. After
this, if you wish to output the video signals with 1080p or Deep
Color, connect the TV using a High Speed HDMI™ cable
without built-in equalizer, then reset the player using the Setup
Navigator (page 21).
• Are you using an HDMI cable with built-in equalizer?
Is Pure Audio set to Mode 1?
Is a DVI device connected?
When set to Mode 1, no picture is displayed during playback
(page 53).
The picture may not be displayed properly if a DVI device is
connected.
Is HDMI Color Space properly set?
Change the HDMI Color Space setting (page 45).
Picture freezes and the front
panel and remote control
buttons stop working.
• Press STOP to stop playback, then restart playback.
• If the playback cannot be stopped, press STANDBY/ON
on the player’s front panel to turn off the power, then turn the
power back on.
• If the power cannot be turned off, press and hold
STANDBY/ON on the player’s front panel for over 5
seconds. The power will turn off.
Motion is unnatural or
picture is not clear.
Is the output video resolution set to 1080/24p?
• The picture may not be displayed properly, depending on the
source. Set the resolution to something other than 1080/24p.
• Change the Pure Cinema setting (page 40).
No picture is displayed or
picture is not output in high
definition when playing BDs.
With some discs, it may not be possible to output the video
signals from the VIDEO output terminals, the S-VIDEO output
terminal or the COMPONENT VIDEO output terminals. In this
case, connect using an HDMI cable (page 15).
• Picture is disturbed during
playback.
• This player supports Macrovision analog copy protection
technology. With some TVs (such as with built-in video deck),
the picture will not be displayed properly when the copy
protected DVD title is played. This is not a malfunction.
• Picture is dark.
• If the player and TV are connected via a DVD recorder/video
deck, etc., the picture will not be displayed properly due to
analog copy protection. Connect the player and TV directly.
• Picture is stretched.
• Picture is cropped.
Is the TV’s aspect ratio properly set?
Read the TV’s operating instructions and set the TV’s aspect
ratio properly.
Is TV Aspect Ratio properly set?
Is 4:3 Video Out properly set?
Is DVD 16:9 Video Out properly set?
Set TV Aspect Ratio properly (page 44).
Set 4:3 Video Out properly (page 44).
Set DVD 16:9 Video Out properly (page 44).
• Aspect ratio cannot be
switched.
When video signals with a resolution of 1080/24p, 1080/60i,
1080/60p or 720/60p are being output from the HDMI OUT
terminals or the COMPONENT VIDEO output terminals, they
may be output with an aspect ratio of 16:9 even if TV Aspect
Ratio is set to 4:3 (Standard) (page 44).
Is Anamorphic Zoom set to On?
Set Anamorphic Zoom to Off (page 52).
Picture is interrupted.
The picture may be interrupted when the resolution of the
recorded video signal switches. Press OUTPUT RESOLUTION
to select a setting other than Auto, 1080/24p or Source Direct
(page 25).
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
Sound and picture are not
synchronized.
Is Output Terminal properly set?
Is Lip Sync properly set?
Set Output Terminal properly (pages 21 and 44).
Adjust the amount of audio delay with the Lip Sync setting
(page 42).
• No sound is output.
Is the disc played back in slow motion?
No sound is output during slow motion play and forward and
reverse scanning.
• Sound is not output
properly.
Is the disc played back in fast forward or fast reverse?
Are the audio cables properly connected?
• Connect the cable properly according to the connected
devices (page 15).
• Insert the cable firmly and all the way in.
Is the audio cable damaged?
If the cable is damaged, replace it with a new one.
Are the connected components (AV receiver or amplifier, etc.) Read the operating instructions of the connected components
and check the volume, input, speaker settings, etc.
properly set?
Is Output Terminal properly set?
When ANALOG AUDIO is selected at Output Terminal, no
audio signals are output from the HDMI OUT or DIGITAL OUT
terminals (page 44).
Is the output video resolution properly set?
Use OUTPUT RESOLUTION to switch to the resolution at
which the video and audio signals are output (page 25).
Is the AV receiver or amplifier, etc., connected to the AUDIO To listen to 2-channel analog audio, connect to FRONT (L/R) of
the AUDIO OUT (7.1 ch) terminals (page 14) and set Audio
OUT (7.1 ch) terminals?
Output Mode to 2 Channel (page 45).
Are the speakers properly set?
When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals and Audio Output Mode is
set to Multi-channel, set Speaker Setup properly (page 47).
Is Pure Audio set to Mode 1 or Mode 2?
If set to Mode 1 or Mode 2, signals are only output from the
output terminal set at Output Terminal (page 53).
Is a DVI device connected?
The sound will not be output from the HDMI OUT terminals if a
DVI device is connected. Connect the device to a DIGITAL OUT
terminals or the AUDIO OUT (7.1 ch) terminals (page 18).
Are you playing a DTS-CD?
To output the sound of DTS-CDs from the HDMI OUT (SUB)
terminal, set HDMI Audio Out to PCM (page 45).
For some BDs, audio signals are only output from DIGITAL
OUT terminals or the HDMI OUT terminals.
Multi-channel sound is not
output.
Is Output Terminal properly set?
Linear PCM (2-channel) audio signals are output from output
terminals other than the one set at Output Terminal under
Audio Out. Set Output Terminal properly (page 44).
Is the AV receiver or amplifier connected to the HDMI OUT
(SUB) terminal?
The HDMI OUT (SUB) terminal outputs linear PCM 2-channel
audio signals. Be sure to connect the AV receiver or amplifier
to the HDMI OUT (MAIN) terminal.
Is the audio output of the connected AV receiver or amplifier, Read the operating instructions of the connected AV receiver
or amplifier and check the audio output settings of AV receiver
or amplifier.
etc., properly set?
Is multi-channel sound selected?
Use the menu screen or AUDIO to switch the disc’s sound to
multi-channel.
Is the AV receiver or amplifier, etc., connected to the AUDIO When the AV receiver or amplifier, etc., is connected to the
AUDIO OUT (7.1 ch) terminals, set Audio Output Mode to
Multi-channel (page 45). Also, set Speaker Setup properly
(page 47).
OUT (7.1 ch) terminals?
Noise can be heard when
outputting DTS Digital
Surround signals from the
DIGITAL OUT terminals.
Is the connected AV receiver or amplifier compatible with DTS If an AV receiver or amplifier that is not compatible with DTS
Digital Surround?
Digital Surround is connected to the DIGITAL OUT terminals,
set DTS Out to DTS PCM (page 44).
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT terminals.
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player’s DIGITAL OUT terminals. The signals
are automatically converted to 48 kHz or less for output.
Secondary audio or
interactive audio is not
output.
Is HDMI Audio Out properly set?
When listening to the sound from an HDMI OUT (MAIN)
terminal, set HDMI Audio Out to PCM (page 45).
Are Dolby Digital Out and DTS Out properly set?
When listening to the sound from an DIGITAL OUT terminal,
set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 44).
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
Sound is fast or slow.
When an HDMI cable is connected, are audio signals being
When a Pioneer AV receiver or amplifier compatible with the
output from devices connected with cables other than HDMI PQLS function is connected directly to the player’s HDMI OUT
cables?
(MAIN) terminal using an HDMI cable, the PQLS function is
activated when playing an audio CD (CD-DA). Because of this,
the sound output from components other than the ones
connected by HDMI cable may be fast or slow. If this happens,
set PQLS to Off (page 45).
After a disc is inserted,
Loading stays displayed and
playback does not start.
Are there too many files recorded on the disc?
When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
is displayed in file names,
etc.
The characters that cannot be displayed on this player are
displayed in .
A message indicating low
memory (local storage)
appears while playing a
BD-ROM disc.
Erase the BDMV data (page 51).
The DVD layer of BD and DVD Is Hybrid Disc Playback properly set?
Set Hybrid Disc Playback to DVD (page 45).
hybrid discs cannot be
played.
The CD layer of BD and CD Is Hybrid Disc Playback properly set?
Set Hybrid Disc Playback to CD (page 45).
hybrid discs cannot be
played.
The BDMV format on BD-R/
-RE discs cannot be played.
To play the BDMV format on BD-R/-RE discs containing both
BDMV and BDAV formats, set BDMV/BDAV Playback
Priority to BDMV (page 45).
Software updating
Problem
Check
Remedy
“Connection to the software
updating server failed” is
displayed when you try to
update the software.
Perform Connection Test (page 51). If “Network connection
test completed successfully.” is displayed, check the proxy
server settings (page 50). Also there may be a problem with the
Internet connection. Contact your Internet service provider.
Software updating is slow.
Depending on the Internet connection and other conditions,
some time may be required to update the software.
• “WRT NG ****” is displayed
on the front panel display
during software updating.
(**** meaning any
The message is displayed when software updating has failed.
Check again whether it can be updated properly.
characters)
• “WRT FAILED” is displayed
on the front panel display
during software updating.
A message other than
“Network connection test
completed successfully” is
displayed when Connection
Test is performed.
Is “LAN cable not connected” displayed?
Check that this player and Ethernet hub (or router with hub
functionality) are properly connected.
• Is “IP address cannot be obtained.” displayed?
• Is “No response from the gateway.” displayed?
• If the IP address is obtained using the DHCP server function,
check the setting is correct at the Display Network
Configuration (page 51). For details on the DHCP server
function, see the operating instructions of the Ethernet hub (or
router with hub functionality).
• Set the IP address manually.
Is “IP address is overlapped.” displayed?
• Check the operation and settings of the DHCP server
function of the Ethernet hub (or router with hub functionality).
For details on the DHCP server function, see the operating
instructions of the Ethernet hub (or router with hub
functionality).
• If this player’s has been set manually, reset the IP address of
this player or other components.
Is the Ethernet hub (or router with hub functionality) operating • Check the settings and operation the Ethernet hub (or router
properly?
with hub functionality). For details, see the operating
instructions of the Ethernet hub.
68
• Reboot the Ethernet hub (or router with hub functionality).
En
Download from Www.Somanuals.com. All Manuals Search And Download.
KURO LINK
07
Problem
Check
Remedy
KURO LINK function does
not work.
• Is the HDMI cable properly connected?
To use the KURO LINK function, connect the Flat Panel TV and
AV system (AV receiver or amplifier, etc.) to the HDMI OUT
(MAIN) terminal (page 16).
• Are you connected to the HDMI OUT (SUB) terminal?
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function
may not work properly if HDMI cable other than a High Speed
HDMI™ cable is used.
Is KURO LINK set to On on the player?
Set KURO LINK to On on the player (page 45).
Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices
manufactured by companies other than Pioneer, even when
connected using an HDMI cable.
• The KURO LINK function will not work if devices that do not
support the KURO LINK function or devices manufactured by
companies other than Pioneer are connected between the
KURO LINK-compatible device and the player.
• Even when connected to a Pioneer product compatible with
the KURO LINK function, some of the functions may not work.
Also refer to the operating instructions of the connected
device.
Is KURO LINK set to On on the connected device?
Set KURO LINK to On on the connected device. The KURO
LINK function operates when KURO LINK is set to On for all
devices connected to the HDMI OUT (MAIN) terminal.
Once connections and settings of all the devices are finished,
be sure to check that the player’s picture is output to the Flat
Panel TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player’s picture is not being output to the Flat Panel TV, the
KURO LINK function may not work properly.
For details, refer to the operating instructions of the connected
device.
Are multiple players connected?
The KURO LINK function may not work if three or more players,
including this player, are connected by HDMI cable.
Others
Problem
Check
Remedy
The player’s power turns off Is Auto Power Off set to On?
automatically.
If Auto Power Off is set to On, the player’s power turns off
automatically if no operation is performed for over 30 minutes
(page 46).
The player’s power turns on Is KURO LINK set to On?
or off automatically.
The player’s power may turn on and off together with the power
of the TV connected to the HDMI OUT (MAIN) terminal. If you
do not want the player’s power to turn on and off when the TV’s
power is turned on and off, set KURO LINK to Off (page 45).
Player cannot be operated
with remote control.
Is an AV receiver or amplifier connected to the CONTROL IN Operate with the remote control of the device connected to the
terminal on the player’s rear panel? CONTROL IN terminal.
Are you operating the remote control from a point too far away Operate from within 23 feet of the remote control sensor.
from the player?
Are the batteries dead?
Replace the batteries (page 7).
Input of connected TV and AV Is KURO LINK set to On?
system switches
automatically.
The input of the TV and AV system (AV receiver or amplifier,
etc.) connected to the HDMI OUT (MAIN) terminal may
automatically switch to the player when playback starts on the
player or the menu screen (Home Media Gallery, etc.) is
displayed. If you do not want the inputs of the connected TV
and AV system (AV receiver or amplifier, etc.) to switch
automatically, set KURO LINK to Off (page 45).
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
07
Settings you have made have • Have you disconnected the power cord while the player’s
Always press STANDBY/ON on the player’s front panel or
STANDBY/ON on the remote control and check that
POWER OFF has turned off from the player’s front panel
display before disconnecting the power cord. Be particularly
careful when the power cord is connected to the AC outlet on
another device because the player turns off in conjunction with
the device.
been cleared.
power was on?
• Has there been a power failure?
“Processing failed.” is
displayed.
If the message appears repeatedly, please ask your nearest
Pioneer authorized service center or your dealer to carry out
repair work.
Component video output
This video output terminal provides clearer pictures when
connected to a TV equipped with component inputs. Component
video signals consist of three signals, Y, PB and PR.
Glossary
Aspect ratio
The ratio of a TV screen’s width to its height. Conventional TVs have
an aspect ratio of 4:3, while high definition (HD) and widescreen TVs
have an aspect ratio of 16:9.
Composite video output
Signals mixing the luminance signal (Y) and the color signal (C) so
they can be transferred on a single cord are output from this
terminal.
Audio language
Multiple audio tracks, for example the original sound and the
dubbed sound, can be recorded on BD-ROM or DVD-Video discs. Up
to 32 languages (32 audio tracks) can be recorded on BD-ROM
discs, up to 8 languages (8 audio tracks) on DVD-Video discs, so you
can select the desired language when viewing the disc.
Deep Color
This is one of the capabilities of HDMI™. The players supporting
Deep Color can transmit a video signal with a color bit depth of
greater than 8 bits per color component. Subtle color gradations
can be reproduced when connected to a TV that supports Deep
Color.
AVCHD (Advanced Video Codec High
Definition)
Default Gateway
The AVCHD is a high definition (HD) digital video camera recorder
format recording high-definition onto certain media by using highly
efficient codec technologies.
A default gateway is a communication device such as a router
which passes data between networks. It is used to direct data to
networks on which the destination gateway is not explicitly
specified.
BD-J
With BD-ROMs, it is possible to use Java applications to create
highly interactive titles, for example including games.
DHCP (Dynamic Host Configuration
Protocol)
This protocol provides configuration parameters (IP address, etc.)
for computers and other devices connected to the network.
DivX
DivX is a media technology developed by DivX Inc. DivX media files
include moving picture data.
DNS (Domain Name System)
This is a system for associating Internet host names with IP
addresses.
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
Dolby Digital
Dolby Digital is an audio format to record the sound in up to 5.1
channels with a fraction of the amount of data as compared to linear
PCM audio signals.
BDAV
Of the BD format, the Audio Visual Format Specifications for HD
digital broadcast recording is referred to as BDAV on this player and
in this operating instructions.
Dolby Digital Plus
Dolby Digital Plus is an audio format for high-definition media. Built
on Dolby Digital, it combines the efficiency and flexibility to provide
high quality multi-channel audio. With BD-ROMs, up to 7.1
channels of digital sound can be recorded.
BDMV
Of the BD format, the Audio Visual Format Specifications designed
for pre-packaged high definition (HD) movie contents is referred to
as BDMV on this player and in this operating instructions.
Dolby TrueHD
Dolby TrueHD is an audio format using lossless coding. With BD-
ROMs, up to 8 channels can be recorded at 96 kHz/24 bits, or up to
6 channels at 192 kHz/24 bits.
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
DRM
Interlaced scan
07
A technology for protecting copyrighted digital data. Digitized
videos, images and audio retain the same quality even when they
are copied or transferred repeatedly. DRM is a technology for
restricting the distribution or playback of such digital data without
the authorization of the copyright holder.
With this method, one picture is displayed by scanning it twice. The
odd lines are displayed in the first pass, the even lines are displayed
in the second, to form a single picture (frame). Interlaced scan is
indicated in this player and operating instructions by an “i” after the
resolution value (for example, 480i).
DTS Digital Surround
DTS Digital Surround is an audio format to record 48 kHz/24 bits
audio signals in 5.1 channels.
IP address
An address that identifies a computer or other device connected to
the Internet or local area network. It is represented a number in four
sections.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an audio format using lossy
coding. It can record 7.1 channels at 96 kHz/24 bits.
Linear PCM
This is referred as the audio signals that are not compressed,
frequently used for DVD-Video discs containing musicals or music
concerts. This can also be indicated “48 kHz/16 bit”, “96 kHz”, etc.
DTS-HD Master Audio
DTS-HD Master Audio is an audio format using lossless coding.
With BD-ROMs, 7.1 channels can be recorded at 96 kHz/24 bits, or
5.1 channels at 192 kHz/24 bits.
MAC (Media Access Control) address
A hardware identification number assigned specifically to the
network device (LAN card, etc.).
Dynamic range
This refers to the difference between the maximum and minimum
level of the sound. The dynamic range is measured in units of
decibels (dB).
MPEG (Moving Picture Experts Group)
The name of a family of standards used to encode video and audio
signals in a digital compressed format. The video encoding
standards include MPEG-1 Video, MPEG-2 Video, MPEG-4 Visual,
MPEG-4 AVC, etc. The audio encoding standards include MPEG-1
Audio, MPEG-2 Audio, MPEG-2 AAC, etc.
When the dynamic range is compressed (Audio DRC), the minimum
signal level is increased and the maximum signal level decreased.
This way, the volume of loud sounds such as explosions is reduced,
while the sounds with a low level, such as human voices, are easier
to listen to.
Multi angle
Up to 9 camera angles can be recorded simultaneously on BD-ROM
or DVD-Video discs, letting you view the same scene from different
angles.
Ethernet
A standard for local area networks (LANs) used to connect multiple
computers, etc. in the same location. This player supports
100BASE-TX.
Parental Lock
Playback of the contents of some BD-ROM or DVD-Video discs can
be restricted, for example for discs containing scenes of violence.
With BD-ROM discs, an age restriction can be set to restrict
playback. Playing DVD-Video title can be restricted by setting the
parental lock level.
Frames and fields
A frame is the unit for one of the still pictures which compose
motion pictures. One frame consists of a picture of odd lines and a
picture of even lines called fields in video signal with interlaced scan
method (480i, 1080i, etc.).
Picture-in-Picture (P-in-P)
HDCP (High-bandwidth Digital Content
Protection)
HDCP is a specification to protect audiovisual content across the
DVI/HDMI interface.
This is a function for superimposing a sub video on the main video.
Some BD-ROMs include secondary video, which can be
superimposed on the primary video.
Port number
This is a sub-address provided below the IP address for
simultaneously connecting to multiple parties during Internet
communications.
HDMI (High-Definition Multimedia
Interface)
A digital interface standard for next-generation TVs expanding the
DVI (Digital Video Interface) terminal used for example for computer
displays. It allows transfer of non-compressed digital video and
audio signals (Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-
HD Master Audio, DTS-HD High Resolution Audio, DTS Digital
Surround, MPEG-2 AAC, linear PCM, etc.) with a single connector.
Progressive scan
With this method, one picture is consisted of a single picture,
without dividing it in two pictures. Progressive scan provides clear
pictures with no flicker, in particular for still pictures that contain
much text, graphics, or horizontal lines. Progressive scan is
indicated in this player and operating instructions by a “p” after the
resolution value (for example, 480p).
Interactive audio
The audio signals recorded in the titles of BD-ROMs. They include
for example the clicking sound made when the menu screen is
operated.
Proxy server
This is a relay server for ensuring fast access and safe
communications when connecting to the Internet from an internal
network.
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Region number
07
A number assigned to Blu-ray Disc Players, BD-ROM and DVD-
Video discs according to the region in which they are sold. A disc
can be played if the region numbers indicated on the disc include
the number set for the player or if “ALL” is indicated.
S-Video output
An output terminal for transmitting separate luminance (Y) and
color (C) signals over a single cord. It offers clearer pictures than the
composite video output.
Secondary audio
Some BD-ROMs include sub audio streams mixed with the main
audio. These sub audio streams are called “secondary audio”. On
some discs this secondary audio is recorded as the audio for the
secondary video.
Secondary video
Some BD-ROMs include sub videos superimposed on the main
videos using the Picture-in-Picture function. These sub videos are
called “secondary video”.
Subnet mask
This is used to identify which part of the IP address corresponds to
the subnet (a separately managed network). The subnet mask is
expressed as ‘255.255.255.0’.
Subtitle language
This refers to the language of the subtitles often used on movies. Up
to 255 languages (255 types of subtitles) can be recorded on BD-
ROM discs, 32 languages (32 types of subtitles) on DVD-Video discs,
so you can select the desired subtitle when viewing the disc.
VC-1
A video codec developed by Microsoft and standardized by the
Society of Motion Picture and Television Engineers (SMPTE). Some
BDs include videos encoded in this codec.
x.v.Color
“x.v.Color” is a promotion name given to the products that have the
capability to realize a wide-gamut color space based on the
international standard specifications defined as xvYCC.
A wider range of colors than before can be reproduced by playing
video signals conforming to “xvYCC” standards on this player when
connected to an “x.v.Color”-compatible TV, etc.
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
07
Model
BDP-09FD
Type
Blu-ray Disc PLAYER
Rated voltage
Rated frequency
Power consumption
Power consumption (standby)
Weight
AC 120V
60 Hz
58 W
0.3 W
14.3 kg (31 lb 9 oz)
External dimensions (including projecting parts)
420 mm (W) x 143 mm (H) x 365 mm (D)
9
11
6
(16 /16 in. (W) x 5 /16 in. (H) x 14 /16 in. (D))
+5 °C to +35 °C (+41 °F to +95 °F)
5 % to 85 % (no condensation)
Tolerable operating temperature
Tolerable operating humidity
HDMI
2 sets, 19-pin: 5 V, 250 mA (Total value for the HDMI OUT
(MAIN) and HDMI OUT (SUB) terminals)
Video outputs
Video
1 set, RCA jack: 1.0 Vp-p (75 Ω)
S-Video
1 set, S-Video jack:
Y (luminance): 1.0 Vp-p (75 Ω)
C (color): 0.286 Vp-p (75 Ω)
Component video
1 set, BNC jacks:
Y: 1.0 Vp-p (75 Ω)
PB, PR: 0.7 Vp-p (75 Ω)
Audio outputs
7.1-channel (multi-channel: front left/ 1 set, Number of channels: 8, RCA jacks
right, surround left/right, center,
surround back left/right, subwoofer)
Audio output level
Frequency response
S/N ratio
200 mVrms (1 kHz, –20 dB)
4 Hz to 88 kHz (192 kHz sampling)
115 dB
Dynamic range
103 dB
Total harmonic distortion
Wow & flutter
0.0015 %
Below measurable limits ( 0.001 % W. PEAK)
1 set, Optical digital jack
1 set, RCA jack
Digital audio outputs Optical
Coaxial
LAN
Control
1 set, Ethernet jack (100BASE-TX)
1 set, Minijack (3.5 ø)
Input
Note
• The specifications and design of this product are subject to change without notice.
®
• This product includes FontAvenue fonts licensed by NEC Corporation. FontAvenue is a registered trademark of NEC Corporation.
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer
Authorized Independent Service Company, or if you wish to purchase replacement parts,
operating instructions, service manuals, or accessories, please call the number shown
below.
1 – 8 0 0 – 4 2 1 – 1 4 0 4
Please do not ship your product to Pioneer without first calling the Customer Support at the
above listed number for assistance.
Pioneer Electronics Service, Inc.
P.O. BOX 1760, Long Beach,
CA 90801-1760, U.S.A.
For warranty information please see the Limited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian
Authorized Dealer to locate the nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Satisfaction Department at the following address:
Pioneer Electronics of Canada, Inc.
Customer Satisfaction Department
300 Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
For warranty information please see the Limited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisé
Pioneer du Canada pour obtenir le nom du Centre de Service Autorisé Pioneer le plus près
de chez-vous. Vous pouvez aussi contacter le Service à la clientèle de Pioneer:
Pioneer Électroniques du Canada, Inc.
Service Clientèle
300, Allstate Parkway, Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la
garantie restreinte qui accompagne le produit.
S018_C_EF
Register Your Product on
http://www.pioneerelectronics.ca (Canada)
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002_B_En
PIONEER, ELITE, and the PIONEER and ELITE logos are
registered trademarks of Pioneer Corporation.
Published by Pioneer Corporation.
Copyright © 2008 Pioneer Corporation.
All rights reserved.
<08J00001>
<VRB1508-B>
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|