T6400EZ-BG/DK(EN).qx3 03.4.21 15:50 Page 1
TVCR
14PV374/58
21PV375/58
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 3
Table of contents
1. Connecting the TV-Video Combi . . . .4
Preparing the remote control
6. Manual recording . . . . . . . . . . . . .11
General information . . . . . . . . . . . .11
Recording without automatic
for operation . . . . . . . . . . . . . . . . . . . .4
Connecting the cable . . . . . . . . . . . . . .4
Connecting additional devices . . . . . . .4
switch-off . . . . . . . . . . . . . . . . . . . .11
Recording with automatic switch-off
(OTR One-Touch-Recording) . . . . .11
Preventing accidental erasing . . . . .11
Lining up recordings (assemble cut) . .11
Selecting the recording speed
(SP or LP) . . . . . . . . . . . . . . . . . . .12
Automatic controlled recording from
a satellite receiver (RECORD LINK) . .12
2. Important notes for operation . . . . . .4
Navigation in the screen menu . . . . . . .4
3. Installing your TV-Video Combi . . . . .5
Preparation for use . . . . . . . . . . . . . . .5
Decoder allocation . . . . . . . . . . . . . . . .5
Manual TV channel search . . . . . . . . . .6
Using the satellite receiver . . . . . . . . . .6
Automatic Tuning . . . . . . . . . . . . . . . . .6
Sorting and clearing TV channels
7. Programming a recording (TIMER) . .13
General information . . . . . . . . . . . .13
Programming a recording with the
manually . . . . . . . . . . . . . . . . . . . . . . .7
Setting the language . . . . . . . . . . . . . .7
Setting the clock . . . . . . . . . . . . . . . . .7
®
'SHOWVIEW ' system . . . . . . . . . . . .13
Helpful Hints . . . . . . . . . . . . . . . . . .14
Programming a recording (without
the SHOWVIEW system) . . . . . . . . . .14
How to check, change or delete a
programmed recording (TIMER) . . .14
How to change a programmed
4. TV set functions . . . . . . . . . . . . . . . . .8
Selecting a TV channel . . . . . . . . . . . .8
Selection of the scart socket . . . . . . . .8
Selection of the front A/V sockets . . . . .8
Volume control . . . . . . . . . . . . . . . . . . .8
Picture settings . . . . . . . . . . . . . . . . . .8
How do I read TELETEXT? . . . . . . . . .8
Special TELETEXT functions . . . . . . . .8
SMART Picture . . . . . . . . . . . . . . . . . .9
Switch-off function (SLEEP TIMER) . . .9
recording (TIMER) . . . . . . . . . . . . .14
8. Other functions . . . . . . . . . . . . . . .15
Changing the video (colour) system . . .15
Switching the status display off or on . .15
Continuous playback . . . . . . . . . . .16
Blue Background on or off . . . . . . .16
Palental control(Child lock) . . . . . . .16
5. Playback . . . . . . . . . . . . . . . . . . . . . . .9
Playing cassettes . . . . . . . . . . . . . . . . .9
Playing back NTSC cassettes . . . . . . .9
Displaying current tape position . . . . . .9
Searching for a tape position
9.Before you call an engineer . . . . . .17
with picture(scanning) . . . . . . . . . . . .10
Still picture . . . . . . . . . . . . . . . . . . . . .10
Searching for tape position without
picture(forward wind and rewind) . . . .10
Index search . . . . . . . . . . . . . . . . . . .10
Manual Tracking . . . . . . . . . . . . . . . . .10
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 4
1. Connecting the TV-Video Combi
4.Language setting picture will appear on the
screen.
Preparing the remote control for
operation
The remote control and its batteries are packed
separately in the original TV-Video Combi pack-
aging. You must install the batteries in the
remote control before use.
PUSH MENU TO CONTINUE
1.Take the remote control and the enclosed
batteries (2 batteries).
I do not see a Language setting picture
2.Open the remote control's battery compartment
and place the batteries in it as shown in the pic-
ture and close the battery compartment.
The remote control is now ready to use.
Its range is approximately 7 metres.
* Check the cable connections.
You can find more details in chapter 'Preparation
for use'.
Connecting the cable
Connecting additional devices
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket.
[14 inch]
1.Insert the aerial cable plug into the AERIAL
at the back of the TV-Video Combi.
2.Connect the mains cable to the wall socket.
3.If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
[14 inch]
The respective scart socket is usually marked
'
AV'
or 'TV' on the decoder or satellite receiver.
switch. The power switch
left side panel of the set.
is located on the
2. Important notes for operation
Navigation in the screen menu
Switching on
You can switch on the TV-Video Combi with
You can check/change many functions and set-
tings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:
STANDBY/ON y
.
PLAY B-K
STOP C-L
If you press
,
,
,
PROG P+
,
FWD 1- B
REW0- s
0..9
PROG P–
or
while
MENU
,
Call up the menu: with
.
the set is in Stand-by, the power will be auto-
matically turned on.
PLAY B-K STOP C-L
To select: with
.
To enter or change your selection: with the
0..9
PLAY B-K STOP C-L
number buttons
or with
0..9
Note that the keys
will be inactive for
FWD 1- B
To save or confirm: with
To cancel: with CLEAR .
STATUS/EXIT
.
about 5 seconds just after having switched the
TV-Video combi off.
Power outage/no power
To end: with
.
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
SELECT K L CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 5
3. Installing your TV-Video Combi
Preparation for use
Decoder allocation
This chapter shows you how to prepare your TV-
Video Combi for use. The TV-Video Combi auto-
matically seeks out and stores all available TV
channels.
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or hired decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
0..9
1.Use PROG P+
PROG P– or
to select the
,
TV channel which you would like to allocate
the decoder to.
MENU
2.Press
. The main menu will appear.
1.Select the desired language for the on-screen
PLAY B-K STOP C-L
3.Use
SET UP'. Then press
to select 'TUNER
PLAY B-K STOP C-L
menu by pressing
.
FWD 1- B
.
MENU
2.Press
.
PLAY B-K STOP C-L
4.Use
to select 'MANUAL
3.Confirm with PROG P+ .
The automatic TV channel search starts.
FWD 1- B
TUNING'. Then press
.
PLAY B-K STOP C-L
5.Use
to select
'DECODER'.
MANUAL TUNING
PLEASE WAIT
PROG.
CHANNEL
→DECODER
SKIP
VIDEO MODE [SECAM]
AUDIO MODE [DK]
SELECT K L CHOOSE B
END=EXIT
P55
055
[OFF]
[OFF]
START
FINISH
→→→→→→→→→→→→→→→→→→→→→→→
4.'TIME' and 'DATE' will appear on the TV
screen.
FWD 1- B
6.Use
to select 'ON'
(Decoder switched on).
TIME --:--
How can I switch off the decoder?
DATE --/--/--
FWD 1- B
Use
to select 'OFF' (Decoder
SMART CLOCK [ON]
switched off).
END=EXIT
STATUS/EXIT
7.To end, press
.
The decoder has now been allocated to this TV
channel.
5.Check 'TIME'. If required, please change the
0..9
time with the number buttons
.
6.Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
7.When all information is correct, save by
STATUS/EXIT
pressing
.
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 6
STATUS/EXIT
7.To end, press
.
Manual TV channel search
How do I change 'VIDEO MODE' or 'AUDIO
MODE'?
If you want to change the video or audio mode,
select 'VIDEO MODE' or 'AUDIO MODE' with
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
PLAY B-K STOP C-L
FWD 1- B
. Then, press
select your desired mode.
to
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'TUNER SET UP' with
STOP C-L
FWD 1- B
and confirm with
.
Using the satellite receiver
PLAY B-K
3.Select 'MANUAL TUNING' with
STOP C-L
FWD 1- B
.
and confirm with
You can receive channels from the satellite
PLAY B-K STOP C-L
4.Select 'PROG.' with
. Then
AV1/EXT1
receiver via the scart socket
.
FWD 1- B
.
press
To do this, select the channel number 'AV1' by
0..9
pressing 0,0,1, with the keys
on the remote
MANUAL TUNING
→PROG.
control.You will have to select the channel you
want to receive on the satellite receiver itself.
P55
055
[OFF]
[OFF]
CHANNEL
DECODER
SKIP
VIDEO MODE [SECAM]
AUDIO MODE [DK]
SELECT K L CHOOSE B
END=EXIT
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are reinstalling the TV-Video
Combi, e.g. after moving house, you can start
this procedure again. This will replace the TV
channels already saved with the new ones.
MENU
PLAY B-K STOP C-L
0..9
5.With
, select the
or
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
FWD 1- B
.
1.Press
. The main menu will appear.
What is a special channel?
PLAY B-K
2.Select 'TUNER SET UP' with
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
STOP C-L
FWD 1- B
and confirm with
.
PLAY B-K
3.Select 'AUTO TUNING' with
A specific frequency/channel is assigned to each
TV station.
STOP C-L
FWD 1- B
, and confirm with
.
Certain frequency ranges are specified as special
channels (hyperband channels).
PLEASE WAIT
START
PLAY B-K STOP C-L
6.Select 'CHANNEL' with
and confirm with
desired channel with
,
FWD 1- B
. Then enter the
FINISH
0..9
.
→→→→→→→→→→→→→→→→→→→→→→→
When a channel is found,it will stop searching. If
FWD 1- B
this is the channel you want, press
. If
'
'
you set SKIP on for a channel, this channel will
be ignored when going through the channels
4.The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.
5.When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
PROG P+
PROG P–
with
or
.
To search for other TV channels, begin again at
step 4.
I don't know the channels for my TV stations
In this case, press
PLAY B-K STOP C-L
in 'CHAN-
NEL' to start the automatic channel search. A
changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.
EN
6
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 7
PLAY B-K STOP C-L
3.Select 'LANGUAGE' with
Sorting and clearing TV channels
manually
FWD 1- B
and confirm with
.
You can use this function to individually sort the
TV channels already saved or to delete unwant-
ed TV channels or those with poor reception.
The clock resets automatically
If you save a TV channel that transmits TXT/PDC
on programme number ‘P01’, date and time will
and constantly be updated. As a result, time
changes, i.e. daylight savings time, will be set
automatically.
END=EXIT
PLAY B-K
4.Select the desired language with
STOP C-L
.
MENU
1.Press
. The main menu will appear.
STATUS/EXIT
5.To end, press
.
PLAY B-K
2.Select 'TUNER SET UP' with
STOP C-L
FWD 1- B
and confirm with
.
Setting the clock
PLAY B-K STOP C-L
3.Select 'MOVE' with
, and
If the display shows an incorrect time or ' --:-- '
the time and date must be reset manually.
MENU
FWD 1- B
confirm with
.
1.Press
. The main menu will appear.
MOVE
PLAY B-K
2.Select 'GENERAL SET UP' with
→P01: 02
P02: 03
P03: 05
P04: 10
P05: 74
P06: 90
P07: 99
P08: 121
P09: 124
P10: 130
STOP C-L
FWD 1- B
and confirm with
.
PLAY B-K STOP C-L
3.Select 'CLOCK' with
and
FWD 1- B
confirm with
.
SELECT K L CHOOSE B
END=EXIT
TIME --:--
PLAY B-K STOP C-L
4.With
, select the saved TV
DATE --/--/--
channel that you want to move.
SMART CLOCK [ON]
FWD 1- B
5.Confirm with
.
PLAY B-K
6.Move the selected channel with
END=EXIT
STOP C-L
to the programme number you want
to assign.
FWD 1- B
Then pless
. The programme num-
.
4.Check the time in 'TIME'. If required, please
ber will change to '_ _'
0..9
change the time with
.
FWD 1- B
7.Confirm with
5.Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
6.Choose 'SMART CLOCK' ON or OFF with
8.To assign other TV channels to a programme
number, repeat steps 4 to 7.
9.Confirm the assignment of the TV channel
FWD 1- B
.
with
10.To exit the
.
MOVE menu
STATUS/EXIT
7.To end, press
.
STATUS/EXIT
, press
MOVE menu
.
Time/date is displayed incorrectly despite
manual setting
* With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme num-
ber 'P01', date and time will automatically be
Setting the language
You have the option of setting one of the dis-
played languages for the on-screen menu (OSD).
updated when the TV-Video Combi is in
by
Stand-
.
MENU
1.Press
. The main menu will appear.
If you wish to switch this automatic time cor-
rection off, select 'OFF' for Smart Clock. You
can reactivate this function at any time by
selecting Smart Clock 'ON'.
PLAY B-K
2.Select 'GENERAL SET UP' with
STOP C-L
FWD 1- B
and confirm with
.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 8
4. TV set functions
PLAY B-K STOP C-L
3.Select an item using
, and
Selecting a TV channel
REW0- s
FWD 1- B
then modify with
.
Select the desired TV channel (= the programme
SELECT K L ADJUST s
B
/
0..9
number) with PROG P+ , PROG P– or with
on the remote control.
BRIGHTNESS
<
<
<
<
<
>
>
>
>
>
CONTRAST
COLOUR
SHARPNESS
TINT
Selection of the scart socket
To select the Scart socket, please enter 0,0,1,
END=EXIT
0..9
with the keys
on the remote control. AV1
appears on the screen.
STATUS/EXIT
4.To end, press
.
'TINT' appears only when playing a tape record-
ed with NTSC system.
Selection of the front A/V sockets
To select the front A/V sockets, please enter
How do I read TELETEXT?
0..9
0,0,2, with the keys
on the remote control.
'AV2' appears on the screen.
Many TV channels transmit TELETEXT informa-
tion along with their TV channels. With this TV-
Video Combi you can retrieve this information
and display it on the screen using the built-in
TELETEXT decoder.
Volume control
You can adjust the volume using VOL5+ ,
VOL5– on the remote control.
1.Press
to switch the TELETEXT decoder
on. Your TV-Video Combi will now show
TELETEXT for the TV channel you have
If you would like to change the volume on the
machine, press 5– or 5+ on the TV-Video
Combi.
selected. Press
again to show TELE-
TEXT in transparent mode.
2.If you want to select another page, type in the
number of the page with the number buttons
If you want to mute the sound temporarily
MUTE
(e.g.:during a telephone call), press
the remote control. When you press
on
0..9
on the remote control.
MUTE
With the colour buttons on your remote control
you can directly select the page numbers
shown at the bottom of the TV screen.
again, the sound will return at its original vol-
ume level.
The button
page.
takes you back to the start
Picture settings
3.Press
off.
to switch the TELETEXT decoder
The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.
Special TELETEXT functions
MENU
1.Press the
. The main menu will appear.
In TELETEXT mode you can use the special
TELETEXT functions.
o
PLAY B-K
2.Select 'PICTURE CONTROL' with
STOP C-L
FWD 1- B
and confirm with
..
l
p
: enlarge font
: select TELETEXT sub-page
: recall hidden information
p
l
o
: stop page changes
: go back to start page
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 9
SMART Picture
Switch-off function (SLEEP TIMER)
You can change the picture setting during play-
You can programme your set to switch-off auto-
matically after a predetermined period.
SLEEP
back.
1.Press
ture setting.
2.Press
ture setting of your choice.
SMART PICTURE
to show the current pic-
again to select the pic-
1.Press
.
SLEEP
2.Press
repeatedly to extend the time
SMART PICTURE
until switch-off in 30 minute increments.
The screen will show the time remaining until
switch-off, e.g.: '+0:30'
'NATURAL': best all-purpose-setting to watch
a well-recorded tape (natural picture).
'SPORTS': accentuate the details. Valuable to
watch high quality tapes or recorded sport events.
'MOVIE': to get the best picture when you play
a movie.
The machine now counts backwards to the
switch-off time.
The maximum time period to be set until switch-
off is 2 hours.
'WEAK SIGNAL': for rented tapes. It reduces
the noise, making the picture more enjoyable.
'VIDEO GAMES': best setting when playing a
video game.
If you would like to turn this function off, press
SLEEP
on the remote control several times until
switch-off appears. '--:--' will appear on the
screen.
SLEEP
To check the time until switch-off, press
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
5. Playback
Do I need to change the playback speed
when playing back LP recordings?
During playback, the correct speed will auto-
matically be selected. For more information,
please read the section 'Selecting the recording
speed (SP or LP)' in the chapter 'Manual
recording'.
Playing cassettes
You can use this TV-Video Combi to playback
recorded VHS video cassettes. You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
1.Put a cassette into the cassette slot. The cas-
sette is inserted automatically.
Playing back NTSC cassettes
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system reduces
interference. For new or high quality cassettes,
it emphasises the details.
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
Displaying current tape position
Picture/ sound quality is poor
The following information is displayed on the
screen: e.g.: 0:02:45 shows the counter in hours,
minutes and seconds.
SP/LP: will show the recorded speed of your
cassette
'REM 0:06': will show the actual amount of play-
ing/recording time left on the tape in hours and
minutes.
When you play an NTSC cassette, the TV-Video
Combi will show 'REM -:--'.
When playing rental videos or older, poorer
quality cassettes, it may not be possible to com-
pletely filter out picture and sound interference.
This is not a fault in your machine. Read the
section 'Manual tracking'.
PLAY B-K
2.Press
to view the tape.
STOP C-L
3.To stop the playback, press
or
STOP/EJECT on the TV-Video Combi.
EJECT A
4.To eject the cassette, press
or
STOP/EJECT when the TV-Video Combi stops
the playback.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 10
How can I set the counter to '0:00:00'?
You can set the counter to '0:00:00' with
Searching for tape position without
picture (forward wind and rewind)
CLEAR
.
When you put a cassette in the TV-Video
Combi, the counter will automatically reset to
'0:00:00'.
STOP C-L
1.Stop the tape with
.
REW0- s
FWD 1- B
2.Press
(reverse) or
(forward).
3.To stop the tape, press
The counter does not move
STOP C-L
.
This occurs when there are no recordings on a
portion of a tape. This is not a fault in your TV-
Video Combi.
Index search
The screen shows '-0:01:20'
If you rewind a cassette from the tape position
'0:00:00', the counter will show for instance,
'-0:01:20' (the cassette was rewound to 1
minute and 20 seconds before '0:00:00').
'-:--' is displayed in the 'REM' counter
This counter will automatically recognise the
length of the tape. In addition, when you put in
a cassette the TV-Video Combi must first calcu-
late the time played. Therefore, '-:--' appears
first and only after the tape has been running
for a few seconds, the correct playing time will
be shown.
Every time a tape is recorded, an index mark is
written on the tape.
These marked positions can be found again
quickly and easily later.
1.To search for the previous marking, press
REW0- s
INDEX
and then
.
INDEX
2.For the next marking, press
and then
FWD 1- B
.
3.As soon as the TV-Video Combi finds this
marking, it automatically switches to play-
back.
Searching for a tape position with
picture (scanning)
Manual Tracking
To adjust the tracking manually, press P+ or
REW0- s
1.While a cassette is playing, press
P-
.
on the TV-Video Combi during playback
Tracking returns to Automatic Tracking
Adjustment when you press
FWD 1- B
(reverse) or
times.
(forward) one or more
STOP C-L
or insert a
tape.
PLAY B-K
2.Press
to resume playback.
Still picture
STILL 2
1.During playback, press
to stop the
tape and display a still picture.
PLAY B-K
2.To continue playback, press
.
Scanning and still motion interferes with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 11
6. Manual recording
General information
Recording with automatic switch-off
(OTR One-Touch-Recording)
Use 'Manual Recording' to make a sponta-
neous recording (for example, a programme cur-
rently being shown).
1.Insert a cassette.
0..9
2.Use PROG P+
PROG P– or
to select the
If you want to start and stop a recording manual-
ly, read the section 'Recording without auto-
matic switch-off'.
programme number you want to record.
3.Press REC I .
4.Each time you press REC I you will add 30
minutes to the recording time.
STOP C-L
If you want to start a recording manually but
have it stopped automatically, read the section
'Recording with automatic switch-off'. (e.g.
not to record to the end of the tape)
5.To stop recording, press
.
Read the section 'Automatic recording from a
satellite receiver', if you want a recording to be
controlled automatically by a satellite receiver.
Preventing accidental erasing
All cassettes (except
rental and pre-recorded
cassettes) have a securi-
ty tab on the back of the
cassette.
To prevent recording
Recording without automatic
switch-off
over important recordings (erasing), you can
remove this security tab.
If you later decide to record on a protected cas-
sette, simply cover the hole with adhesive tape
or slide the tab to the right.
1.Insert a cassette.
2.Use PROG P+ PROG P– or
programme number you want to record, for
example, 'P01'.
0..9
to select the
3.To start recording, press REC I .
STOP C-L
4.To stop recording, press
.
Lining up recordings (assemble cut)
When you add a further recording to a cassette,
which already has a recording on it, a short
blank (flicker) can appear between the old and
the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as
follows:
1.Find the tape position of the old recording
where you want to insert the new recording.
2.Look at the last minute of the old recording
(playback).
STILL 2
3.Press
at the tape position where
the new recording is to go and press REC I .
4.Now start recording as usual by pressing
REC I on the remote control.
STOP C-L
5.Stop recording with
.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 12
Selecting the recording speed (SP
or LP)
Automatic controlled recording from
a satellite receiver (RECORD LINK)
LP allows to double the recording duration on tape
(for example six hours instead of three hours on a
E180 cassette).
This function automatically starts recording on the
switched-off TV-Video Combi when a video signal is
recognised through the connected scart cable. If
your satellite receiver has a programming function,
the recording will start automatically (as long as the
satellite receiver is switched on).
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'RECORD SETUP' with
STOP C-L
FWD 1- B
and confirm with
.
MENU
1.Press
. The main menu will appear.
PLAY B-K
3.Select 'RECORD SPEED' with
PLAY B-K
2.Select 'RECORD SET UP' with
STOP C-L
.
STOP C-L
FWD 1- B
and confirm with
.
PLAY B-K
3.Select 'RECORD LINK' with
SELECT K L CHOOSE B
STOP C-L
.
→RECORD SPEED
RECORD LINK
[SP]
[OFF]
SELECT K L CHOOSE B
RECORD SPEED
→RECORD LINK
[SP]
[OFF]
END=EXIT
4.Select the required recording speed with
END=EXIT
FWD 1- B
.
STATUS/EXIT
5.To end, press
.
FWD 1- B
4.Select function 'ON' with
.
'SP'/'LP' /'AUTO'
'SP': StandardPlay (normal recording speed) offers
the usual first-class picture quality.
STATUS/EXIT
5.To end, press
.
6.Programme the satellite receiver with the
required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.
7.Insert a cassette.
The TV-Video Combi is now ready to record. The
beginning and end of the recording is controlled
via EXT1 socket.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3-
hour cassette (E180) with a somewhat reduced
picture quality.
'AUTO': AUTOmatic Long Play. If there is not
enough space on the tape to record a pro-
grammed recording in standard speed, the record-
ing is automatically done in 'LP' (Longplay).
Otherwise, the recording speed will be 'SP'
(Standardplay).
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 13
7. Programming a recording (TIMER)
General information
ShowView system
ShowView No.
Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
TV-Video Combi will switch to the right pro-
gramme number and begin recording at the cor-
rect time. With this TV-Video Combi, you can
pre-programme up to eight recordings within a
period of one year. To make a programmed
recording, your TV-Video Combi needs to know:
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
*VPS or PDC on or off
1 2 3 – – – – – –
SET=SV/V+
CORRECT=CLEAR
END=EXIT
3.Press SV/V+
.
4.Select ONCE, DAILY, or WEEKLY recording
PLAY B-K STOP C-L
FWD 1- B
with
. Then press
.
ShowView system
→ONCE
DAILY
WEEKLY
This information is saved in a TIMER block.
What is 'VPS/PDC'?
'VPS' (Video Programming System)/ 'PDC'
(Programme Delivery Control) are used to con-
trol the start and duration of TV channel record-
ings. If a TV programme starts earlier or ends
later than scheduled, the TV-Video Combi will
turn on and off at the correct time.
What do I need to know about 'VPS/PDC'?
Usually the VPS or PDC time is the same as
the start time. But if your TV guide shows a
VPS or PDC time which is different from the
programme’s scheduled start time, e.g. 20.10
(VPS/PDC 20.14), you must enter the VPS/PDC
time exact to the minute. If you want a start time
different from the VPS/PDC time, you must
switch VPS/PDC off.
SELECT K L CHOOSE B
END=EXIT
Selecting once/daily/weekly recordings
PLAY B-K STOP C-L
Using
lowing options:
, select from the fol-
'ONCE':
'DAILY':
Recording once
Repeated daily recordings (Monday
to Friday)
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
Prog No changes to ' - - '
* The entered SHOWVIEW number is incorrect.
STATUS/EXIT
Correct your input or end with
The following message appears on the
screen:'ERROR'
.
Programming a recording with the
'SHOWVIEW®' system
* The entered SHOWVIEW number is incorrect. Correct
STATUS/EXIT
your inputs or end with
.
* Check the time/date (see chapter 'Installing your
TV-Video Combi', section 'Setting the clock').
* A daily recording was entered for the wrong
day. Daily programming can only be used for
recordings to be made from Monday to Friday.
The following message appears on the
screen:’TIMER NOT COMPLETED’
Thanks to this simplifed programming system, you
no longer need to tediously enter the date, pro-
gramme number, start and end time. All the infor-
mation needed for programming is contained in the
SHOWVIEW-programming number. You can find this
SHOWVIEW number in most TV listing magazines
written next to the concerned programme.
* The channel is wrong.
5.The decoded data appears after confirmation. You
can go back to change the data. Select the corre-
1.Press
on the remote control.
SV/V+
2.Enter the entire SHOWVIEW number. This num-
ber is up to 9 digits long and can be found
next to the start time of the TV programme in
your TV listing magazine. [e.g:1-234-5 or 1
234 5] If you make a mistake, you can clear
CLEAR
FWD 1- B
CLEAR
sponding input field using
or
0..9
. Change the data with
.
6.When all inputs are correct, press
STATUS/EXIT
. The programming information is
stored in a TIMER block.
your input with
.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 14
Selecting once/daily/weekly recordings
Switching on 'VPS/PDC' in the 'START' input field
PLAY B-K STOP C-L
Use
to select from the fol-
FWD 1- B CLEAR
Select 'VPS/PDC' using
. Press
lowing options:
'1' to switch off 'VPS/PDC' or press '2' to switch on
'VPS/PDC'.
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY': Repeated weekly recordings (every
week on the same day)
7.Insert a cassette with an intact security tab
(unprotected).
5.Enter the Start time (START) End time (STOP),
Programme number (PROG.), VPS/PDC infor-
0..9
Helpful Hints
mation and the Date with
.
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
The TV-Video Combi will not operate
*
If you want to cancel the programmed recording,
STANDBY/ON y
press
longer than 3 seconds.
Cassette is ejected during recording
The end of the tape was reached during recording.
Error message:
If you forgot to insert a cassette,'INSERT CAS-
*
6.When all inputs are correct, press
*
STATUS/EXIT
. The programming information
SETTE FOR TIMER RECORDING' will appear.
Error message: ‘FULL’
is stored in a TIMER block.
7.Insert a cassette with an intact security tab
(unprotected).
* If this error message appears after pressing
+
SV/V
, then all TIMER blocks are already pro-
grammed. No more recordings can be pro-
grammed. If you want to clear a programmed
recording (TIMER block), select the programme
How to check, change or delete a
programmed recording (TIMER)
CLEAR
number on TIMER LIST menu and press
.
MENU
1.Press
. The main menu will appear.
Cassette was ejected as soon as inserted.
* If a cassette with the security tab removed
was inserted, 'PROTECTED CASSETTE
TIMER CANNOT RECORD' will appear.
Undo the erase protection (chapter 'Manual
PLAY B-K STOP C-L
2.Select 'TIMER' with
. Then
FWD 1- B
press
.
PLAY B-K STOP C-L
3.Select 'TIMER LIST' with
,
FWD 1- B
and confirm with
.
Recording', section 'Preventing accidental eras-
ing') or insert another cassette.
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
→TIMER LIST
Programming a recording (without
the SHOWVIEW system)
END=EXIT
MENU
1.Press
. The main menu will appear.
PLAY B-K STOP C-L
2.Select 'TIMER' with
. Then
FWD 1- B
press
.
FWD 1- B
4.Select timer block with
5.To cancel the recording, press
STATUS/EXIT
.
3.Select ONCE, DAILY, or WEEKLY recording with
CLEAR
.
PLAY B-K STOP C-L
FWD 1- B
. Then press
.
6.To end, press
.
SELECT K L CHOOSE B
How to change a programmed
recording (TIMER)
→ONCE
DAILY
WEEKLY
TIMER LIST
MENU
1.Press
. The main menu will appear.
PLAY B-K STOP C-L
2.Select 'TIMER' with
FWD 1- B
. Then
END=EXIT
press
.
If all TIMER blocks are in use, 'FULL' will appear
3.Select ONCE, DAILY, or WEEKLY recording
on the TV screen.
4.Select the desired TIMER block with
PLAY B-K STOP C-L
with
. Then press
0..9
.
FWD 1- B
.
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 15
0..9
4.Select a TIMER block with
. (The flashing
number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
CLEAR
5.Press
to delete information, and
0..9
input correct information with
.
STATUS/EXIT
6.To end, press
.
8. Other functions
Changing the video (colour) system
Switching the status display off or
on
If you playback recordings made on other video
recorders or if you want to record from external
sources (via the scart socket), the automatic
video-colour detection system may lead to colour
distortion.
You can switch off this automatic detection-sys-
tem as follows.
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen.
MENU
1.Press
. The main menu will appear.
Video (colour) systems
PLAY B-K
2.Select 'VCR SET UP' using
In central Europe transmissions are broadcast in
PAL (Phase Alternation Line) standard. France
uses SECAM (Séquentiel à mémoire). In some
countries (like USA and Japan), TV viewers
receive their programmes as an NTSC signal
(National Television System Committee).
STOP C-L
FWD 1- B
and confrim with
.
PLAY B-K
3.Select 'STATUS DISPLAY' with
STOP C-L
.
SELECT K L CHOOSE B
REPEAT PLAY
→STATUS DISPLAY
BLUE BACKGROUND[ON]
[ON]
[ON]
SYSTEM
1.Press
on the remote control to
select the TV-colour system presenting the
least distortion during playback.
SYSTEM
At each
pressing , the display will
END=EXIT
change cyclically; AUTO, ME-SECAM, PAL.
FWD 1- B
4.Select 'ON' or 'OFF' with
.
Which settings can I choose?
'ON': Shows the status display for a few sec-
onds only.
'OFF': Switches off the status display.
AUTO
STATUS/EXIT
5.To end, press
.
2.After 5 seconds, the display indication will
disappear.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 16
Blue Background on or off
Continuous playback
This function can be used to play a cassette
over and over again. When the end of the cas-
sette is reached, it will rewind and start from the
beginning again. This function is activated or
deactivated as follows.
If you want the TV screen to be solid blue when
a weak signal is received, set BLUE BACK-
GROUND to ‘ON’. The screen will be blue and
the sound will be muted. Or, if you want to
receive the weak signal, set BLUE BACK-
GROUND to ‘OFF’.
MENU
1.Press
. The main menu will appear.
MENU
1.Press
. The main menu will appear.
PLAY B-K
2.Select 'VCR SET UP' using
PLAY B-K
2.Select 'VCR SET UP' using
STOP C-L
FWD 1- B
and confirm with
.
STOP C-L
FWD 1- B
and confrim with
.
PLAY B-K
3.Select 'REPEAT PLAY' with
PLAY B-K
3.Select 'BLUE BACKGROUND' with
STOP C-L
.
STOP C-L
.
SELECT K L CHOOSE B
SELECT K L CHOOSE B
→REPEAT PLAY
STATUS DISPLAY
BLUE BACKGROUND[ON]
[ON]
[ON]
REPEAT PLAY
STATUS DISPLAY
→BLUE BACKGROUND [ON]
[ON]
[ON]
END=EXIT
END=EXIT
FWD 1- B
4.Select 'ON' with
.
4.Select 'OFF' (no blue background) or 'ON'
If you select 'OFF', continuous playback will be
switched off.
FWD 1- B
(blue background on) with
.
STATUS/EXIT
5.To end, press
.
STATUS/EXIT
5.To end, press
.
6.Insert a cassette.
PLAY B-K
7.Start the continuous playback with
Parental control (Child lock)
.
Your TV-Video Combi will automatically rewind and
start playing the tape from the begining when it rec-
ognizes a non-recorded part longer 10 seconds.
This function protects your TV-Video Combi from
unwanted use. All button functions on the front of
the machine are blocked.
Programmed recordings will still be recorded (in
spite of the parental control) and cannot be
interrupted.
MENU
1.Press
. The main menu will appear.
PLAY B-K STOP C-L
2.Use
to select 'GENERAL
FWD 1- B
SET UP'. Then press
.
PLAY B-K STOP C-L
3. Use
to select 'CHILD
LOCK'.
FWD 1- B
4. Use
to select 'ON'.
'If a button at the front of the machine is pressed
while parental control is active, ’CHILD LOCK
ACTIVE’ will appear on the screen for a few sec-
onds.
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 17
9. Before you call an engineer
If, contrary to expectation, you have any prob-
lems using this TV-Video Combi, it may be
caused one of the following reasons.
No recording possible
*The TV channel you want to record is not
stored or you have selected the wrong pro-
gramme number: check TV channels stored.
*A cassette was inserted that does not have the
security tab (cannot be used to record): Insert
a cassette with an intact security tab or
change cassette. For more information, please
see the section ‘Preventing accidental erasing’
in chapter ‘Manual Recording’.
Your TV-Video Combi does not respond to
any button being pressed:
*There is no power supply: check the power
supply.
*Parental control is on:switch the parental con-
trol off.
*There is a technical problem: disconnect from
the mains power supply for 5 minutes, then
power-up again.
*’VPS/PDC’ switched on but ‘VPS/PDC time’
wrong: enter ‘VPS/PDC time’ exactly to the
minute. Check your aerial connection.
If this doesn't help, you can reset your TV-Video
Combi to the default factory settings.
The wrong TV channel has been recorded
after you programmed a recording using the
SHOWVIEW system
1.Enter the SHOWVIEW programming number
you wanted to record.
Resetting devices to default factory settings
*Warning: All the information stored (TV chan-
nels, time and date, TIMER) will be cleared.
1.Switch the TV-Video Combi to stand-by.
2.Press and hold REC I and PROG P- at the
same time for 2 seconds or more.
FWD 1- B
2.Confirm with
.
3.Check the programme number/channel name
in the ‘PROG.’ input field.
A cassette is jammed in the TV-Video Combi
*Don’t use force. Disconnect the set from the
mains and reconnect it again after a few sec-
onds.
4.If this does not correspond to the desired TV
channel, select the input field and change
the programme number/channel name.
FWD 1- B
5.Confirm with
.
Remote control does not work
*Remote control is not pointed at the TV-Video
Combi.
*Take out the batteries, wait for 10 seconds and
place them back in the remote control.
*Batteries have run out. Change the batteries.
Smart Clock does not work
*You have stored on programme number ‘P01’ a
TV channel that does not transmit TELETEXT.
Store on ‘P01’ a TV channel that transmits
TELETEXT.
*Poor TELETEXT reception. Store a TV channel
on ‘P01’ with good TELETEXT reception.
*You have not activated the Smart Clock func-
tion. Switch the function ‘ON’.
No picture when you play a cassette
*There is no recording on the cassette.
Poor picture quality when you play a cas-
sette
*The cassette is badly worn-out or of poor qual-
ity. Use a new cassette.
*Tracking is not properly adjusted. Turn to sec-
tion ‘Manual Tracking’.
*Magnetism from nearby appliances and geo-
magnetism might affect the colour of the TV
picture. Move the TV-Video combi away from
such sources. The TV-Video combi will readjust
itself automatically. If you want to initiate an
immediate readjustment, unplug the TV-Video
combi from the mains and plug it in again
approximately 30 minutes later.
You can also call the customer service centre
in your country.The telephone numbers can be
found on the back of this instruction manual.
Have the model number (MODEL NO) and the
production number (PROD.NO.) of your TV-
Video Combi ready.
EN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 18
PHILIPS NORGE AS
Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo
PHILIPS AUSTRIA GMBH
Triesterstrasse 64
1101 Wien
AUSTRIA
Tel: 0810 001 203
PHILIPS PORTUGUESA, S.A.
Consumer Information Centre
Rua Dr. António Loureiro Borge, nr. 5
Arquiparque, Miraflores
P-2795 L-A-VEHLA
NORWAY
Phone: 2274 8250
PORTUGAL
Phone: 021-4163063
OY PHILIPS AB
Sinikalliontie 3,
02630 Espoo
PHILIPS INFO CENTER
Alexanderstrasse 1
20099 Hamburg
PHILIPS CE, The Philips Centre,
420 - 430 London Road,
Croydon, Surrey
FINLAND
GERMANY
CR9 3 QR
puh. 09 615 80 250
Tel: 0180-53 56 767
UNITED KINGDOM
Phone: 0208-665-6350
PHILIPS KUNDTJÄNST SERVICE CONSOMMATEURS PHILIPS
PHILIPS KUNDECENTER
Frederikskaj 6,
1780 København V
DANMARK
Knarrarnäsgatan 7
Kista
164 85 Stockholm
SWEDEN
BP 0101
75622 Paris Cédex 13
FRANCE
Phone: 0825-889 789
Tlf.: 80 88 28 14
Tel: (0)8 598 52 250
PHILIPS POLSKA
Al. Jerozolimskie 195B
02-222 Warszawa
POLSKA
PHILIPS ELECTRONICS IRELAND LIMITED
Consumer Information Centre
Newstead, Clonskeagh
PHILIPS REPRESENTATION OFFICE
Ul. Usacheva 35a
119048 MOSCOW
DUBLIN 14
RUSSIA
TEL.: (022)-571-0-571
Phone: 01-7640292
Phone: 095-937 9300
PHILIPS CONSUMER ELECTRONICS
Servizio Consumatori
Via Casati 23
20052 Monza - Milano
ITALY
PHILIPS INFO CENTER
Fegistrasse 5
8957 Spreitenbach
SUISSE
Tel.: 0844-800 544
Phone: 800 820026
PHILIPS Iberia, S.A.
C/Martinez Villergas, 49
28027 MADRID
PHILIPS MAGYARORSZÁG KFT.
Fehérvári út 84/a.
Budapest 1119
PHILIPS CUSTOMER CARE CENTER
Twee Stationsstraat 80/
80 Rue des Deux Gares
SPAIN
Phone: 902-11 33 84
HUNGARY
Phone: (01)-382-1700
1070 BRUSSEL/BRUXELLES
BELGIUM (for BENELUX)
Tel: 070-222303
PHILIPS CONSUMENTENLIJN
Postbus 102 5600 AC Eindhoven
NEDERLAND
Tel.: 0900-8406
3143 025 21251
0EMN02152 / T6400/T6500EZ-BG/DK*****
Download from Www.Somanuals.com. All Manuals Search And Download.
|