-,.%'/,012)301#0)43(/15641.,/1'3##)0/15/
!!!"#$%&%#'"()*+!,&()*,
78 !"#$%&'()'*
9:;<=>?@AB
9C;<=>?@AB
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
To begin
TV tour
Setting up
Keys on the TV 14
Register your TV 16
Help and support 17
4
1.1
1.2
1.3
1.4
1.5
4
8
2
Use your TV 18
Remote control 18
Menus 21
Watch TV 23
Watch 3D 27
Watch satellite 28
Watch a connected device 30
Subtitles and languages 31
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3
More TV 32
Net TV 32
Interactive TV 34
Text 35
Videos, photos and music 37
Games 39
3.1
3.2
3.3
3.4
3.5
3.6
Locks and timers 40
4
Setup 41
Picture and sound 41
Ambilight 43
Channels 44
Satellite channels 46
Network 48
Devices 50
Universal access 51
Software 52
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
5
Connections 53
First connections 53
About cables 54
Connect devices 56
Connect more devices 64
Network 68
SD card 69
Common interface CAM 70
3D 71
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
6
Troubleshooting 72
Contact information 72
TV and remote control 73
TV channels 74
Picture and sound 75
Devices 76
6.1
6.2
6.3
6.4
6.5
6.6
6.7
Videos, photos and music 77
Network 78
7
Specifications 79
Software 79
Environmental 80
Power and reception 81
Display and sound 82
Display resolutions 83
Multimedia 84
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
Connectivity 85
Dimensions and weights 86
Index 87
Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1 To begin
1.1 TV tour
The remote control
To open or close the FIND menu ¬.
Open the Find menu to open the list of channels while you are
watching TV channels or the list of videos and music while you
browse your PC on TV.
To adjust the volume.
To open or close the ADJUST menu t
Open the Adjust menu to quickly adjust the picture and sound
settings.
To switch TV channels.
You can set the Smart picture setting to Game, which is ideal for
gaming, or change the Smart sound setting of the TV
loudspeakers.
To open or close the Home menu h.
To open or close the OPTIONS menu r.
Open the Home menu as a starting point to operate the TV.
Open the Options menu to select optional settings related to
what you are watching or doing on TV.
In the Home menu, you can start or stop a TV activity. Such as
watching TV - Watch TV - or watching a movie from a
connected DVD player.
While you watch a channel, mark it as a favourite channel or
whilst watching a photo slideshow, stop the slideshow.
4
To begin / TV tour
Download from Www.Somanuals.com. All Manuals Search And Download.
Back È.
Yellow
With Back, you can go back to the previous TV channel or go
one step back in a menu.
With the yellow key, you can select the yellow option.
Blue
Red
With the blue key, you can select the blue option.
With the red key, you can select the red option or open digital
Interactive TV or some TV demonstration clips.
Read more about the remote control in Help > Use your TV >
Remote control > Overview.
Or go to the ¬ Search page in this Help to look for any topic.
Press u to select the next TV tour.
Connecting devices
Green
With the green key, you can select the green option or the Eco
settings.
Use the HDMI™ connection to connect a DVD, Blu-ray Disc
player or game console.
The HDMI connection offers the best picture and sound quality
and, if your device has EasyLink (HDMI-CEC), the TV can add
the device in the Home menu automatically.
When a device is added in the Home menu, you can select it to
watch its programme. If the device has no EasyLink or you do
not use the HDMI connection, you must add the connected
device in the Home menu using Add your devices.
To begin / TV tour
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Read more about Add your devices in Help > Use your TV >
Menus > h Home.
Read more about using EasyLink in Help > Use your TV >
Remote control > Operate devices.
In the chapter Help > Connections, drawings like these will help
you to connect most common devices.
High Definition TV
This TV can display High Definition programmes, but to enjoy
HD TV you need to get programmes in HD first. If you are not
watching HD programmes, the picture quality will be that of a
normal TV.
Watch HD TV programmes from . . .
• a Blu-ray Disc player
• a digital HD receiver connected with HDMI and with a
subscription to HD programmes
• over-the-air HD broadcasts
• channels offering HD on a digital network
• an HD game console connected with HDMI and playing an
HD game
HD video clip
To experience the stunning sharpness and picture quality of HD
TV, you can start the High Definition video clip from the Home
menu. Press Home > Setup > Watch demos (on the second
page of the Setup menu).
Contact your dealer for more information.
HD channels or providers in your country.
Network and Net TV
6
To begin / TV tour
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless home network
Next to the DVB-T and DVB-C reception, this TV has a built-in
satellite DVB-S/S2 receiver. You can connect a satellite dish
antenna and receive digital satellite channels.
Simply link up this TV to your wireless home network. There is
no need for a network cable. Enjoy your videos, photos and
music files from your PC on your TV screen.
Read more about Satellite Channels in Help > Setup > Satellite
channels.
Read more about Network in Help > Setup > Network.
Net TV
If you have an Internet connection on your home network, you
can connect to Net TV. Net TV offers you online movies,
pictures, music, infotainment, games and much more.
Read more about Net TV in Help > More TV > Net TV.
Wi-Fi MediaConnect
You can use Wi-Fi MediaConnect to project files like movies,
music or presentations wirelessly from your laptop or desktop PC
onto your TV.
Read more about Wi-Fi MediaConnect in Help > Setup >
Network > Wi-Fi MediaConnect.
Satellite receiver
To begin / TV tour
7
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Setting up
Stand or wall mounting
The 2-in-1 stand that comes with the TV, can be used as a table-
top stand or as a wall mount bracket. Instructions to mount the 2-
in-1 stand are also included in the printed Start guide.
Read the instructions on the following pages.
Unscrew the bolt in the middle of the bar with the supplied hex
key.
Caution
Wall mounting the TV requires special skills and should only be
performed by qualified personnel. The TV wall mounting should
meet safety standards according to the TV's weight. Read also the
safety precautions before positioning the TV.
Koninklijke Philips Electronics N.V. bears no responsibility for improper
mounting or any mounting that results in accident or injury.
Unmount the TV from the stand if necessary.
To wall mount the TV, you need the 2 screws used to fix the
TV onto the TV stand and the 2 mounting discs as shown.
8
To begin / Setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the bar as shown.
Reposition the bar on the stand and fix the bolt with the hex
key.
Fix the stand to the TV.
To begin / Setting up
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The TV is mounted at the correct height if your eyes are level
with the centre of the screen when you sit down.
Distance between the 2 fixing points . . .
- 81cm/32" = 260mm
- 102cm/40" = 300mm
- 117cm/46" = 340mm
Fix the 2 mounting discs. Use screws with a diameter of max
6mm.
10
To begin / Setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
Slide the bottom plate of the stand onto the mounting discs.
To level the TV, pull the bottom of the TV towards you slightly
and let it slide on the discs.
Unscrew the bolt and turn the bar in the position shown.
VESA info
Your TV is prepared for a VESA-compliant wall mount bracket (not
included).
VESA codes to purchase the bracket:
- 40PFL9715 : VESA MIS-F 200, 300, M6
- 46PFL9715 : VESA MIS-F 300, 300, M6
Use a screw length as shown in the drawing.
To begin / Setting up
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Never expose the TV, remote control or batteries to excessive
heat. Never place them near burning candles, naked flames or
other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other openings
on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power plugs can
cause arcing or fire. Ensure that no strain is exerted on the
power cord when you swivel the TV screen.
• When disconnecting the power cord, always pull the plug,
never the cord. Ensure that you have full access to the power
plug at all times.
Risk of injury or damage to the TV!
• Two people are required to lift and carry a TV that weighs
more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the supplied stand.
Secure the stand to the TV tightly. Place the TV on a flat, level
surface that can support the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can safely
bear the weight of the TV set. Koninklijke Philips Electronics N.V.
bears no responsibility for improper wall mounting that results in
accident, injury or damage.
• Parts of this product are made of glass. Handle with care to
avoid injury or damage.
Position the TV
Carefully read the safety precautions before you position the TV.
• Position the TV where light does not shine directly on the
screen.
• Dim lighting conditions in the room for best Ambilight effect.
• Position the TV up to 25 cm away from the wall for the best
Ambilight effect.
Risk of damage to the TV!
Before you connect the TV to the power outlet, ensure that the
power voltage matches the value printed on the back of the TV.
Never connect the TV to the power outlet if the voltage is
different.
Risk of injury to children!
Follow these precautions to prevent the TV from toppling over
and causing injury to children:
• Never place the TV on a surface covered by a cloth or other
material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of the
mounting surface.
• Never place the TV on tall furniture, such as a bookcase,
without anchoring both the furniture and TV to the wall or a
suitable support.
• Teach children about the dangers of climbing on furniture to
reach the TV.
Risk of swallowing batteries!
Position the TV at the ideal viewing distance. Get more from
HD TV picture or any picture without straining your eyes. Find
the 'sweet spot', right in front of the TV, for the best possible
TV experience and relaxed viewing.
The remote control may contain coin-type batteries which can
easily be swallowed by small children. Keep these batteries out of
reach of children at all times.
Risk of overheating!
The ideal distance to watch TV from is three times its diagonal
screen size. When seated, your eyes should be level with the
centre of the screen.
Never install the TV in a confined space. Always leave a space of
at least 10 cm or 4 inches around the TV for ventilation. Ensure
curtains or other objects never cover the ventilation slots on the
TV.
Safety
Lightning storms
Disconnect the TV from the power outlet and antenna before
lightning storms. During lightning storms, never touch any part of
the TV, power cord or antenna cable.
Read and understand all instructions before you use the TV. If
damage is caused by failure to follow instructions, the warranty
does not apply.
Risk of hearing damage!
Risk of electric shock or fire!
Avoid using earphones or headphones at high volumes or for
prolonged periods of time.
• Never expose the TV to rain or water. Never place liquid
containers, such as vases, near the TV. If liquids are spilt on or
into the TV, disconnect the TV from the power outlet
immediately. Contact Philips Consumer Care to have the TV
checked before use.
Low temperatures
If the TV is transported in temperatures below 5°C or 41°F,
unpack the TV and wait until the TV temperature reaches room
temperature before connecting the TV to the power outlet.
12
To begin / Setting up
Download from Www.Somanuals.com. All Manuals Search And Download.
Care
• Never touch, push, rub or strike the screen with any object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the TV.
• To avoid deformations and colour fading, wipe off water drops
as quickly as possible.
• Avoid stationary images as much as possible. Stationary images
are images that remain onscreen for extended periods of time.
Stationary images include onscreen menus, black bars, time
displays, etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
Temperature and humidity
In rare occasions, depending on temperature and humidity, minor
condensation can occur on the inside of the TV glass front (on
some models). To prevent this, do not expose the TV to direct
sunlight, heat or extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a few hours.
The condensation moisture will not harm the TV or cause
malfunction.
To begin / Setting up
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Press J Ambilight, to switch Ambilight on or off.
1.3 Keys on the TV
While the TV is on standby, you can switch Ambilight on and
create an Ambilight LoungeLight effect in your room. Read more
about LoungeLight in Help > Use your TV > Use Ambilight >
LoungeLight
Power switch
Switch the TV on or off with the power switch at the right-hand
side of the TV. When switched off, the TV does not consume
any energy.
If the red indicator light is off, switch on the TV with the power
switch.
h Home
If the red indicator is on (standby indication), press O on the
remote control to switch on the TV. Alternatively, you can
switch on the TV from standby with CH+, CH- or h. It takes a
few seconds for the TV to start up.
Press h (Home) to open the Home menu on screen. You can
navigate the Home menu with the volume - or + (left or right)
and the channel - or + (down or up) keys on the TV. To
confirm your choice, press h again.
Read more about Home in Help > Use your TV > Menus >
h Home
V Volume
Press V (Volume) - or + to adjust the volume. Or use the +
or - keys on the remote control.
CH Channel
Press CH (Channel) - or + to switch channels. Or use the W or
X keys on the remote control.
Ambilight
14
To begin / Keys on the TV
Download from Www.Somanuals.com. All Manuals Search And Download.
To begin / Keys on the TV
15
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4 Register your TV
Congratulations on your purchase and welcome to Philips.
Register your TV and enjoy a range of benefits including full
support (including downloads), privileged access to information
about new products, exclusive offers and discounts, the chance to
win prizes and even participate in special surveys about new
releases.
Go to www.philips.com/welcome
16
To begin / Register your TV
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5 Help and support
Using Help and Search
Help
You can open Help from the Home menu. In most cases, you
can also press the yellow key on your remote control to open
or close Help directly. For some activities, like Text, the colour
keys have specific functions and cannot open Help.
Before you follow the Help instructions, close Help. Press the
yellow key or press h to close Help. When you press the
yellow key again, Help will open on the page where you closed
it.
¬ Search
In Help, use ¬ Search to find a topic you need. Select a topic
from the list with the navigation keys and press OK. The topic
you are looking for might not on the first page but a few pages
further on. Press x to go to the next page.
Online support
To solve any Philips TV related problem, you can consult our
online support. You can select your language and enter your
product model number.
Go to www.philips.com/support
On the support site you can find your country's telephone
number to contact us as well as answers to frequently asked
questions (FAQs).
You can download new TV software or the manual to read on
your PC. You can email a specific question or, in some countries,
chat online to one of our collaborators.
Contact Philips
For support, you can call the Philips Consumer Care hotline in
your country. Find the telephone number in the printed
documentation that came with the TV.
Or consult our website www.philips.com/support
TV model number and serial number
You might be asked to provide the TV product model number
and serial number. Find these numbers on the packaging label or
on the type label on the back or bottom of the TV.
To begin / Help and support
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Use your TV
2.1 Remote control
Overview
8 CH- / Previous X
To switch to the previous channel, page or chapter.
9 Source Ú
To switch directly to a TV connection.
10 Options r
To open or close the Options menu.
1 Standby O
To switch the TV on or back to standby.
2 Home h
To open or close the Home menu.
3 Navigation key
To navigate up, down, left or right.
4 OK key
To activate a selection.
11 Back È
To go back to the previous channel. To exit a menu without
changing a setting. To go back to the previous Text or Net TV
page.
12 Volume V
To adjust the volume level.
13 Mute m
To mute the sound or to restore it.
5 Find ¬
To open or close the channel list or your list of photos, music or
movies.
6 Adjust t
To open or close the most used settings for picture, sound,
Ambilight or 3D.
7 CH+ / Next W
To switch to the next channel, page or chapter.
14 Red colour key
To open interactive TV or to select a Text page.
15 Green colour key
To open the Eco settings or to select a Text page.
16 Yellow colour key
To select a Text page.
17 Blue colour key
To select a Text page.
18
Use your TV / Remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
In general, these keys open the following device menus:
1 Home menu
2 Setup menu
3 Disc menu (disc content)
4 Pop-up menu
5 Options menu
6 Programme guide
7 Media selection
One Touch Play
Insert a disc into an EasyLink HDMI-CEC device and press Play
on the device. The TV switches on from standby and starts
playing the disc.
System Audio Control
If you connect an EasyLink audio system, you can listen to the
audio from the TV through the audio system. The TV speakers
are muted automatically. You can control the volume of the
audio system with the TV remote control.
18 Number keys and text keypad
To select a TV channel directly or to enter text.
19 Subtitle
To switch Subtitles on or off.
20 Text / Info
Surround mode
With recent Philips devices, you can change the surround sound
setting of the device on the TV. To change this setting, press
tADJUST, select Surround mode and press OK. On Next
mode, press OK to toggle through the available modes on the
device.
To open or close text. / Keep this key pressed for 4 seconds to
open or close information on next programmes.
Operate devices
The remote control of the TV can also operate a connected
device. The device must have EasyLink (HDMI-CEC) and have it
switched on. The device must also be connected with an HDMI
cable.
Smart sound
With recent Philips devices, you can change the Smart sound
setting of the device on the TV. To change this setting, press
tADJUST, select Smart sound and press OK. Select a sound
mode from the list.
Operate an EasyLink device
To operate such a device with the TV remote control, select the
device -or its activity- in the h Home menu and press OK.
The commands of all keys, except the h key, the tADJUST
key and the rOPTIONS key, are forwarded to the device.
Screen off
If a recent Philips audio device only sends audio to the TV, the
device may suggest switching off the TV screen. To switch off
the screen when this message appears, select Screen off and
press OK. To switch the screen back on, press h (Home).
Switch back to TV
To switch the remote control back to operate the TV, press h
System Standby
Press O on the remote control to switch the TV and all
EasyLink devices to standby.
(Home) and select Watch TV and press OK.
Show device keys
When operating a device, some of the keys might not be
available on the TV remote control. To make these keys
selectable on TV, press rOPTIONS and select Show device
keys. Select the key you need and press OK.
Read more about EasyLink in Help > Setup > Devices >
EasyLink HDMI-CEC.
IR sensor
To hide the device keys, press È (Back).
Always make sure you point the remote control at the remote
control infrared sensor on the front of the TV.
Batteries
Use your TV / Remote control
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To replace the batteries of the remote control, slide open the
small tray at the bottom of the remote control. Use 2 coin-
shaped batteries (Type CR2032 – 3V). Make sure the + side of
the batteries (top side) point upwards. The small tray has a +
indicator.
Remove the batteries if you are not using the remote control for
a long time.
Dispose of batteries according to the end of use directives. Read
Help > To begin > Setting up > End of use.
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use
substances such as alcohol, chemicals or household cleaners on
the TV or remote control.
20
Use your TV / Remote control
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Menus
3 Press OK to confirm the position. All devices and activities shift
to the right.
You can highlight another device or activity and reposition it.
h Home
To stop Reorder, press rOPTIONS and select Exit reorder.
In the Home menu, you start watching TV or start watching a
movie disc or any other TV activity.
Press h to open the Home menu.
To start an activity, select it with the navigation keys and press
OK.
Restore activities
To recall a deleted activity from a device with several activities,
select the device or one of its activities and press rOPTIONS.
Select Restore activities and press OK. All deleted activities of
this device appear again.
To close the Home menu, press h again.
¬ FIND
With ¬FIND you open the Channel list while you are watching
TV channels or you open the list of pictures, music and videos
while browsing your PC or connected USB device.
Press ¬FIND to open the list.
To close the list, press ¬ again.
Add your devices
A connected device should be added to the Home menu for
easy selection.
If your connected device does not have EasyLink (HDMI-CEC)
or is not connected with an HDMI cable, you need to manually
add your device to the Home menu with Add your devices.
Devices with EasyLink (HDMI-CEC) and connected with an
HDMI cable automatically show their activity in the Home menu.
A single device can add several activities.
If an EasyLink device does not appear automatically, EasyLink on
the device may be switched off.
t ADJUST
With the ADJUST menu, you can adjust picture, sound,
Ambilight and 3D settings quickly.
Add a device manually
In the Home menu, select Add your devices and press OK.
Follow the instructions on screen.
The TV asks you to select the device and the connection to
which the device is connected.
Press tADJUST to open the Adjust menu.
Select your choice with the navigation keys and press OK.
To close the menu, press tADJUST again.
The device or its activities are now added to the Home menu.
Rename a device
To rename an added device or activity, select the device in the
Home menu and press rOPTIONS and select Rename. Use
the keypad on the remote control as you do for SMS/text
messaging to enter the new name.
Remove a device
To remove a device or activity from the Home menu, select it
and press rOPTIONS and then select Remove this device. If a
device or activity keeps appearing in the Home menu after you
deleted it, switch off the EasyLink setting on the device to
prevent the icon from being automatically added again.
Read more about EasyLink in Help > Use your TV > Remote
control > Operate devices.
In the Adjust menu you can do these settings:
• Ambilight On or Off
• Ambilight dynamics
• Picture format
• Smart picture (presets)
• Smart sound (presets)
• Speakers
Reorder
To reorder a device or an activity in the Home menu, select it
and press rOPTIONS.
1 Select Reorder.
2 With the navigation keys, reposition the device or activity
where you want it. You can only reorder the sequence of the
added devices and activities.
• Surround
• Picture shift
Use your TV / Menus
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambilight
Read more about the Ambilight settings in Help > Setup >
Ambilight.
Picture format
Read more about the Picture format settings in Help > Use your
TV > Watch TV > Picture format.
Smart picture, Smart sound
You can set the TV to the pre-defined setting that best suits
what you're watching.
Read more about Smart settings in Help > Use your TV >
Watch TV > Smart settings.
Speakers
To hear the sound through the TV speakers, close Help, press
tADJUST, select Speakers and select TV.
Select Amplifier if you want to hear the sound through a
connected Home Theatre System or Amplifier.
These settings temporarily override any EasyLink settings.
Surround
To switch the TV automatically to the best surround sound mode
(only available when a Home Theatre System is connected), close
Help, press tADJUST, select Surround and select On.
Picture shift
You can shift the picture on screen in a vertical or a horizontal
direction to view subtitles fully (depending on the TV input).
While watching TV, press tADJUST, select Picture shift and
press OK. Shift the picture with the navigation keys. Press OK to
stop Picture shift.
r OPTIONS
With the OPTIONS menu, you select optional settings related to
what you are watching or doing on TV.
Press rOPTIONS at any time to see which options are
available.
To close the menu, press rOPTIONS again.
22
Use your TV / Menus
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel list
2.3 Watch TV
In the Channel list, you can look up all installed TV and radio
channels.
Switch channels
To watch TV and switch channels, make sure the Watch TV
option is selected in the Home menu.
While watching TV, press ¬FIND to open the Channel list.
Press ¬FIND again or È (Back) to close the Channel list
without changing the channel.
To watch TV, press h, select Watch TV and press OK.
In the Channel list, you can navigate to a TV channel or radio
station and press OK to watch the TV channel or listen to the
radio station.
The Channel list can have several pages. To view the next or
previous Channel list page, press W or X.
Channel list options
With the Channel list on screen, press rOPTIONS to select
the following options:
• Select list
• Mark as favourite
• Reorder
• Rename
To switch channels, press CH+ or CH- on the remote control.
You can use the number keys if you know the channel number
or press ¬FIND to open the Channel list to select a channel.
To switch back to the previous channel, press È (Back).
Select list
Use this option to select which channels are shown in the
Channel list. The list you select here determines which channels
you flick through with CH+ and CH-.
Radio channels
If digital broadcasting is available, digital radio stations are installed
during installation. Switch to a radio channel just like you switch
to a TV channel. A DVB-C channel installation usually places radio
stations from channel number 1001 onwards.
Mark as favourite
When a channel is highlighted in the Channel list, you can set it
as a favourite channel.
Read Use your TV > Watch TV > Favourite channels.
Options for watching TV channels
If you watch digital broadcast TV channels, press rOPTIONS
Reorder
to view the available options:
• What's on
You can reposition channels within the list.
1 Press rOPTIONS and select Reorder to start reordering
channels.
2 Highlight a channel and press OK.
3 Reposition the channel where you want it with the navigation
keys. Alternatively, enter the new position directly with the
number keys.
• Status
• Video selection
What's on
This option shows information on the current and next
programme on this channel. Use the navigation keys to scroll
through text or to go to the next column.
Status
Depending on the broadcast, the Status page will show relevant
information. You can use this information to improve the channel
signal or to check if certain services are available.
4 Press OK to confirm the position. You can insert the channel
or swap it.
You can highlight another channel and do the same.
To stop Reorder, press rOPTIONS and select Exit reorder.
Video selection
Digital TV channels can offer multi video signals (multi-feed
broadcasts), different camera viewpoints or angles of the same
event or different programmes on one TV channel. The TV
shows a message to advise if any such TV channels are available.
When available, press rOPTIONS and select Video selection
to select your choice.
Use your TV / Watch TV
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Rename
Favourite channels
You can rename a channel in the Channel list.
1 In the channel list, highlight the channel you want to rename.
2 Press rOPTIONS and select Rename to start renaming. You
can enter text directly with the remote control keypad or open a
full keyboard on top of the text entry menu.
In the Channel list you can mark a channel as a favourite. You
can set the Channel list to only zap through your list of favourite
channels.
To open the Channel list, while you are watching TV channels,
press ¬FIND.
Mark a channel as favourite
While watching TV, press ¬FIND to open the Channel list.
Navigate to the channel you want to mark as favourite and press
rOPTIONS. Select Mark as favourite.
In the Channel list, the favourite channel is marked with a F.
You can unmark a favourite channel with Unmark favourite.
Channel list of favourites
You can set the Channel list to only flick through your favourite
channels.
With the list on screen, press rOPTIONS and select Select
list. Select Favourites from the list and press OK. With this list
selected, you will only flick through your favourites.
Enter text with the remote control keypad
Use the navigation keys to position the cursor in the text. Press
È (Back) to delete a character.
Use the remote control keypad as you do for SMS/text
messaging to enter a character. Use the 1 key to select a special
character. Select Clear to delete a character.
Select Done to end Rename.
Programme guide
Enter text with the on-screen keyboard
To open the on-screen keyboard on top of the text entry menu,
press OK when the cursor in the text flashes.
On the keyboard, use the navigation keys to highlight a character
and press OK to enter it. To delete a character, press È (Back)
or highlight ! and press OK.
If programme guide information is available in your area, you can
open an on-screen programme guide with scheduled TV
programmes.
The Programme guide is provided by the broadcaster or Net TV.
To switch from uppercase to lowercase or to a set of special
characters, press W (Next) or X (Previous).
To edit a character within a line of text, position the cursor on
this character and use the z and Z keys at both ends of the
on-screen spacebar.
To close the on-screen keyboard, highlight Done and press OK.
Open the Programme guide
While watching TV, press h, select Programme guide and press
OK.
To quit the Programme guide without changing a setting, press
È (Back).
First use
The first time you open the Programme guide, the TV scans all
TV channels for programme guide information. This can take
several minutes. The data is stored in the TV. The TV can store
programme data for up to eight days.
24
Use your TV / Watch TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme guide options
With a programme selected in the guide, press rOPTIONS to
select the following:
Adjust smart settings
To adjust a specific setting of a smart setting, select the smart
setting and press OK. Then press h and select Setup. Select
TV settings, navigate to the individual setting and adjust it.
• Set reminder
To set an on-screen reminder for when a programme is due to
start, select Set reminder and press OK. The programme is
marked with a © (Clock). To cancel this reminder, select Clear
reminder and press OK.
To return to the original smart setting values, undo the
adjustments you made by first setting the TV in the smart setting
you want to reset. Then press h > Setup > TV settings, select
Reset and press OK.
• Change day
View the previous or next day's programmes.
• More info
Read more about adjusting separate settings in Help > Setup >
Picture, Sound and Ambilight.
Shows the programme details and summary.
• Search by genre
View all programmes selected by genre.
Smart picture list
• Personal - Your choices made in Personalise picture and sound
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Cinema - Ideal for watching movies
• Game - Ideal for gaming
• Scheduled reminders
If a reminder is set, you can view a list of all scheduled
reminders.
• Energy saving - Energy-conscious settings
• Update programme guide
After the first scan, the TV stores the programme guide data. If
you update or reinstall channels or reorder the Channel list, you
will need to update the Programme guide.
To update, select Update programme guide. Reminders are
cleared.
• Standard - Factory standard settings
• Photo - Ideal for viewing photos
• Custom - A smart picture setting free for any setting you wish
Smart sound list
Broadcaster or Network
• Personal - Your personal choices made in Personalise picture
and sound
• Standard - Factory standard
• News - Ideal for speech
• Movie - Ideal for watching movies
• Game - Ideal for gaming
• Drama - Ideal for TV soaps
• Sports - Ideal for sports programmes
To select where the Programme guide information comes from,
press h > Setup > TV settings > Preferences > Programme
guide.
Select From the network or From the broadcaster.
From the network
Until you link up with Net TV, programme guide information
comes from the broadcaster. Once you are connected with Net
TV, the TV switches automatically to the Internet for programme
guide information.
From the broadcaster
Guide information comes from the broadcaster/operator.
Picture format
If black bars appear on the screen, you can adjust the picture
format to a format that fills the screen.
While watching TV, press tADJUST to open the Adjust menu
and select Picture format. Select a format from the list and press
OK.
Smart picture and sound settings
For easy picture or sound adjustment, you can select a preset
setting for each.
While watching TV, press tADJUST to open the Adjust menu
and select Smart picture or Smart sound. Make a selection from
the list and press OK.
Picture formats
The following formats are available according to the picture on
screen:
• Auto fill
Automatically enlarges the picture to fill the screen. Minimal
picture distortion, subtitles remain visible. Not suitable for PC
input.
Smart picture and Smart sound
Smart settings are a combination of preset settings suited to a
specific use such as gaming or daylight viewing.
You can adjust a specific setting, like Brightness or Contrast, Bass
or Treble, of a chosen smart setting. The smart setting will
remember the adjustments you made.
Use your TV / Watch TV
25
Download from Www.Somanuals.com. All Manuals Search And Download.
• Auto zoom
Automatically zooms the picture in to fill the screen as much as
possible without distortion. Black bars may be visible. Not suitable
for PC input.
• Super zoom
Removes the black bars on the side of 4:3 broadcasts. The
picture is adjusted to fit the screen.
• Movie expand
Scales the picture to a 16:9 format.
• Wide screen
Stretches the picture to a 16:9 format.
• Unscaled
Expert mode for HD or PC input. Pixel for pixel display. Black
bars may appear with pictures from a PC.
Switch to standby
If the TV is on, press O on the remote control to switch to
standby. The red standby key indicator is on.
Although the TV consumes very little power when on standby,
energy does continue to be consumed.
When you do not use the TV for an extended period of time,
switch the TV off completely with the power switch.
Auto switch off
If you use the TV as a monitor or use a digital receiver to watch
TV (a set top box - STB) and you do not use the remote
control of the TV, switch off the automatic switch off.
This will prevent the TV from switching off automatically after a
4-hour period without a key press on the remote control of the
TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
26
Use your TV / Watch TV
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 Watch 3D
What you need
This TV is prepared for the 3D Full HD accessory PTA02 (sold
separately).
PTA02 Installation
1 Switch off the TV.
2 Connect the 3D transmitter to the 3D connection 3D Out on
the back of the TV.
3 The software update will start automatically and during the
update the TV might switch off and on again. Do not press any
key on the remote control and wait until the message 'Operation
Successful' appears.
4 Unplug the USB device and switch the TV off and back on
again.
Your TV is ready to watch 3D.
3 Install the 3D transmitter on the top or at the bottom of the
TV. Make sure to point the transmitter directly to where you sit
to watch TV.
The small window in the middle of the glasses receives the 3D
signals from the transmitter.
Update the TV software
To prepare your TV for 3D watching, you must update the TV
software.
1 Switch on the TV.
2 Plug in the USB device in the USB connection at the side of
the TV.
Use your TV / Watch 3D
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel list pages
The Channel list can have several pages. To view the next or
previous Channel list page, press W or X.
2.5 Watch satellite
Switch channels
Options
With the Channel list on screen, press rOPTIONS to select :
• TV / Radio
• Select list
• Sort
To watch satellite channels, press h (Home), select Watch
satellite and press OK.
• Mark as favourite
• Rename
• Reorder
• Channel lock
TV / Radio
Set the list to show TV or radio channels.
Select list
Select the list of channels from all satellites or from one specific
satellite. Or show a list of only your favourite satellite channels.
The list you select here determines which channels you will flick
through with CH+ and CH- while watching satellite.
To switch satellite channels, press CH+ or CH- on the remote
control. You can use the number keys if you know the channel
number or you can use the channel list to select a channel.
To switch back to the previous channel, press È (Back).
Sort
You can sort the Channel list by Name, Number or in groups of
free-to-air and scrambled channels – Free / scrambled.
Mark as favourite
When a channel is highlighted in the Channel list, you can set it
as a favourite channel.
Read Help > Use your TV > Watch satellite > Favourite
channels.
Reorder
You can reposition channels within the list.
1 Press rOPTIONS and select Reorder to start reordering
channels.
2 Highlight a channel and press OK.
3 Reposition the channel where you want it with the navigation
keys. Alternatively, enter the new position directly with the
number keys.
Channel list for satellite
When a satellite installation is completed, the satellite channels
are stored in a specific channel list for satellite.
Read more about using the Channel list in Help > Use your TV
> Watch satellite > Channel list.
4 Press OK to confirm the position. You can insert the channel
or swap it.
You can highlight another channel and do the same.
Channel list
To stop Reorder, press rOPTIONS and select Exit reorder.
To open the Channel list, while watching satellite broadcast, press
¬FIND. Select a channel with the navigation keys and press OK
to switch to the channel.
Rename
You can rename a channel in the Channel list.
1 In the channel list, highlight the channel you want to rename.
2 Press rOPTIONS and select Rename to start renaming. You
can enter text directly with the remote control keypad or open a
full keyboard on top of the text entry menu.
To leave the Channel list without changing the channel, press È
(Back).
28
Use your TV / Watch satellite
Download from Www.Somanuals.com. All Manuals Search And Download.
Mark as favourite
In the Channel list, navigate to a channel you want to mark as
favourite and press rOPTIONS. Select Mark as favourite. In
the list, the favourite channel is marked with a F. You can
unmark a favourite channel with Unmark favourite.
Channel list of favourites
You can set the Channel list to only show your favourite
channels.
With the list on screen, press rOPTIONS and select Select
list. Select Favourites from the list and press OK. With this list
selected, you can flick through your favourite channels with CH+
and CH- while watching satellite.
Read more about the options in the Channel list for satellite in
Help > Use your TV > Watch satellite > Channel list.
Channel lock
To prevent children from watching, you can lock channels. To
unlock, you enter the 4-digit child lock code.
Lock channels
You can lock channels in the Channel list.
To open the Channel list, press ¬FIND. To lock channels, press
rOPTIONS and select Channel lock.
Enter text with the remote control keypad
Use the navigation keys to position the cursor in the text. Press
È (Back) to delete a character.
Use the remote control keypad as you do for SMS/text
messaging to enter a character. Use the 1 key to select a special
character. Select Clear to delete a character.
Select Done to end Rename.
Enter your 4-digit child lock code. Select any channel in the list,
press r again and select Lock channel. A locked channel is
marked with a k (Lock). You can select another channel to lock
or unlock.
To exit Channel lock, press r and select Exit.
Change code
Enter text with the on-screen keyboard
To change the current code, press h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice. The
new code is set.
To open the on-screen keyboard on top of the text entry menu,
press OK when the cursor in the text flashes.
On the keyboard, use the navigation keys to highlight a character
and press OK to enter it. To delete a character, press È (Back)
or highlight ! and press OK.
Forgotten your code?
To override the code in case you forget it, enter 8888.
To switch from uppercase to lowercase or to a set of special
characters, press W (Next) or X (Previous).
To edit a character within a line of text, position the cursor on
this character and use the z and Z keys at both ends of the
on-screen spacebar.
Age-rated programmes
To prevent children from watching programmes not suitable for
their age, you can set an age rating (a parental rating).
To close the on-screen keyboard, highlight Done and press OK.
Programmes with an equal or higher rating will be locked. To
unlock the programme, you must enter the 4-digit child lock
code. Not all programmes are rated. The age rating is set for all
satellite channels.
Set an age rating
Press h and select Setup > Satellite settings and select Parental
rating.
To select an age rating, you must first enter your 4-digit child
lock code. If no child lock code is set yet, you can set the code
now.
When the code is entered, you can select the age rating. When
the rating of a programme is equal or higher than the rating you
have set for your child's age, the programme will be locked. The
TV will ask for the code to unlock the programme. For some
operators, the TV only locks programmes with a higher rating.
Favourite channels
Change code
To change the current code, press h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice. The
new code is set.
You can set up your own list of favourite satellite channels.
Forgotten your code?
Use your TV / Watch satellite
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2.6 Watch a connected device
Select a device
Add a connected device to the Home menu for easy selection
later on.
Read more about Add your devices in Help > Use your TV >
Menus > Home menu.
Select from the Home menu
To select and watch a connected device or activity, press h to
open the Home menu and select the device or its activity and
press OK. Make sure the device is switched on.
Select from the list of connections
To open the list of connections, press ÚSOURCE. Select the
TV connection and press OK to switch to the device on that
connection. Make sure the device is switched on.
In general, these keys open the following device menus:
1 Home menu
2 Setup menu
3 Disc menu (disc content)
4 Pop-up menu
5 Options menu
6 Programme guide
7 Media selection
Read more about EasyLink in Help > Setup > Devices >
EasyLink HDMI-CEC.
Operate devices
The remote control of the TV can also operate a connected
device. The device must have EasyLink (HDMI-CEC) and have it
switched on. The device must also be connected with an HDMI
cable.
Operate an EasyLink device
To operate such a device with the TV remote control, select the
device -or its activity- in the h Home menu and press OK.
The commands of all keys, except the h key, the tADJUST
key and the rOPTIONS key, are forwarded to the device.
If the key you need is not on the TV remote control, you can
show extra keys on screen with Show device keys.
Show device keys
To show the device keys on screen, press rOPTIONS and
select Show device keys. Select the key you need and press OK.
To hide the device keys, press È (Back).
30
Use your TV / Watch a connected device
Download from Www.Somanuals.com. All Manuals Search And Download.
2.7 Subtitles and languages
Subtitles
Programme subtitles are available most of the time. You can
switch subtitles on or off. How to set subtitles depends on
whether a channel is analogue or digital.
Switch on subtitles
To open the Subtitle menu, press SUBTITLE. You can switch
subtitles On or Off. Select On during mute to show subtitles only
when the sound is muted with m.
For analogue channels
To make subtitles available for a channel, switch to the channel
and press TEXT to open Text. Enter the page number for
subtitles, usually 888, and press TEXT again to close Text. With
subtitles switched on in the Subtitle menu, subtitles will be shown
if available. Each analogue channel must be set up separately.
For digital channels
There is no need to activate subtitles in Text for digital channels.
You can set a preferred primary and secondary subtitle language.
If these subtitle languages are not available for a channel, you can
select another available subtitle language.
To set the primary and secondary subtitle language, press h and
select Setup > Channel settings and select Languages > Primary
and Secondary subtitles.
To select a subtitle language when none of your preferred
languages is shown, press rOPTIONS, select Subtitle language
and select a language you want temporarily.
Audio languages
Digital TV channels can broadcast audio that transmits several
languages for a programme. You can set the TV to switch to
your preferred language if it is available.
Set your language
To set your preferred audio language, press h and select Setup
> Channel settings and select Languages > Primary and
Secondary audio. The TV will automatically switch to one of your
languages, if one of them is available.
To check if an audio language is available, press rOPTIONS
and select Audio language. You can select another audio language
from the list.
Some digital TV channels broadcast special audio and subtitles
adapted for people who are hearing or visually impaired. Read
Help > Setup > Universal access.
Use your TV / Subtitles and languages
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3 More TV
3.1 Net TV
What is Net TV?
Net TV offers Internet applications called apps. These apps are
tailored for your TV. With these apps you can read your
national newspaper, look at infotainment, or rent a movie from a
video store or watch programmes you missed with catch-up TV
apps. A wide range of Net TV apps are available depending on
your country.
Configure
Net TV specifics
The first time you open Net TV, you must agree to the terms
and conditions before you can continue. Press OK to agree.
Press È (Back) to quit Net TV.
• The availability of Net TV apps vary per country.
• With Net TV, you can view any Internet website you like but
most of them are not tailored for a TV screen and some plug-ins
(e.g. to view pages or videos) are not available on your TV.
Register
If you agree, you can register with Club Philips. Select Register
and press OK. Enter your email address, select Continue and
press OK. Confirm the email address.
• Net TV apps can be added, changed or stopped.
• Net TV shows one page at a time and full screen.
• You cannot download and save files or install plug-ins.
Parental control
To lock Adult 18+ rated apps, switch on Net TV parental
control by selecting Enable and then press OK. Enter an unlock
PIN code of your choice. Confirm your PIN code.
Adult 18+ rated apps are now locked.
Net TV forum website
Find out more on Net TV apps at the Net TV forum website.
Koninklijke Philips Electronics N.V. bears no responsibility regarding
the content and the quality of the content provided by the
content service providers.
To open a locked app, select the app and press OK. The TV will
ask you to enter your 4-digit code.
Clear Net TV memory
What you need
To redo the Net TV configuration and to clear all passwords, PIN
codes, history and cookies, press h (Home), select Setup >
Network settings > Clear Net TV memory.
To enjoy Net TV you must connect the TV to a router with a
high-speed (broadband) connection the Internet. You can use a
home network connected to the Internet. You do not need a
computer.
Net TV apps
Open Net TV
Read more about connecting to your home network in Help >
To open Net TV, press h (Home), select Browse Net TV and
press OK.
Setup > Network.
To close Net TV, press h (Home) and select another TV
activity.
The Net TV home page
When you open Net TV, the home page is shown.
To navigate the page, press u, v, w or x.
To open an app, select the app and press OK.
To go back 1 step, press È (Back).
The home page
1 The App Gallery
2 Your Apps
3 The Internet App
4 Current TV channel
32
More TV / Net TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Video memory
To download a video, you must format an SD memory card as
video memory. Insert the SD card into the SD card slot on the
side of the TV. The TV starts formatting the SD card
automatically. The SD card may be rejected if the write speed is
insufficient for video transfer. Once formatted, leave the card
permanently in the slot.
The App Gallery
To look for apps to add to your home page, select App Gallery
and press OK.
To add an app to the home page, select an app in the list and
press Add.
To search per category, select the category field (All) and press
OK.
SD memory card size
Use a SD HC (High Capacity) memory card with at least 4GB of
storage capacity.
For high-definition (HD) video, use an SD card with at least 8GB
of storage capacity. Use a speed class 2 card or more.
To open the on-screen keyboard, select a text entry field and
press OK.
To switch to the app gallery of another country, select the
country field and press OK.
Open a video store app
To open a video store, press h (Home), select Net TV and
press OK. Select a video store app from the Net TV home
page. Select the video store and press OK. You can add a video
store app on your home page from the app gallery. Availability
of video stores varies by country.
Lock or remove an app
To lock or remove an app, select the app and press
rOPTIONS. Select the option and press OK.
Rent a video
When you open a video store you will be asked to log in or to
create a log in account. With a text entry field selected, press
OK to open the on-screen keyboard.
Reload an app or page
To retry loading an app or an Internet page, press rOPTIONS
and select Reload page.
Consult the video store website for more information.
Security info
To view the level of security of the page you're on, press
rOPTIONS and select Security info.
Online TV
With the online TV apps in Net TV you can watch programmes
you missed. Most often, you can recognise such an online TV
app by its broadcaster’s logo.
Internet websites
To browse Internet websites, select the Internet app on the Net
TV home page and press OK.
To open the on-screen keyboard, select a text entry field and
press OK.
To remove a visited website from the list, press rOPTIONS
and select Remove from History.
What you need
To watch online TV programmes, you need a high-speed
(broadband) Internet connection to the TV.
Read more about connecting to the network in Help > Setup >
Network.
Video stores
Watch online TV
To watch an online TV programme in Net TV, press h
(Home), select Browse Net TV and press OK. Select the
broadcaster app on the Net TV home page and press OK. You
can add a online TV broadcaster app on your home page from
the app gallery.
With the video store apps in Net TV, you can rent your
favourite movie from an online rental video store. You can pay
securely with your credit card.
1 Open a video store app.
2 Select a video.
3 Make the online payment.
4 Download the video.
5 Start watching.
Start a programme
Select a programme from the online TV app page and press OK.
Most often, you can use the x (Play) or U (Pause) keys on your
remote control.
What you need
To rent and download a video, you need a high-speed
(broadband) Internet connection to the TV. You also need an SD
memory card.
Read more about connecting to the network in Help > Setup >
Network.
More TV / Net TV
33
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Interactive TV
What is iTV?
Interactive TV can offer additional infotainment or programmes
on a digital TV channel. Interactive TV is dependent on the
country or broadcast. Benefits range from enhanced text to online
TV and much more.
For some iTV services, you need a high-speed connection to the
Internet. Read Help > Setup > Network.
Use iTV
To open iTV, press the Red key while watching a digital channel.
If interactive TV is available, the Home page of the broadcaster
opens.
To close iTV, press b (Back) repeatedly until the iTV page
closes.
34
More TV / Interactive TV
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Text
Open a Text page and press OK. Select a word or number with
the navigation keys. Now press OK again to jump immediately to
the next occurrence of this word or number. Press OK again to
jump to the subsequent occurrence.
Text pages
To stop the search, press u until nothing is selected.
Open Text
To access Text while you are watching TV channels, press
TEXT.
To close Text, press TEXT again.
Text from a connected device
Some connected devices that receive TV channels can also offer
Text.
To open Text from a connected device, press h, select the
device and press OK. While watching a channel on the device,
press rOPTIONS, select Show device keys and select the B
key and press OK. Press È (Back) to hide the device keys.
To close Text, press È (Back) again.
Digital Text (UK only)
Some digital TV broadcasters offer dedicated Digital Text or
interactive TV on their digital TV channels. This includes normal
Text using the number, colour and navigation keys to select and
navigate.
To close Digital Text, press È (Back).
Text options
Select a Text page
To select a page …
• Enter the page number with the number keys.
• Press W or X
• Press u or v.
• Press a colour key to select a colour-coded subject at the
bottom of the screen.
In Text, press rOPTIONS to select the following:
• Freeze page
• Dual screen
• T.O.P. overview
• Enlarge
• Reveal
• Cycle subpages
• Language
Freeze page
To stop the automatic rotation of subpages, press rOPTIONS
and select Freeze page.
Dual screen / Full screen
To show the TV channel and Text alongside each other, press
rOPTIONS and select Dual screen. Select Full screen to
switch back to full screen view.
T.O.P. overview
To open T.O.P. Text, press rOPTIONS and select T.O.P.
overview.
Enlarge
To enlarge the Text page for more comfortable reading, press
rOPTIONS and select Enlarge. To scroll down the page, press
v or u.
Reveal
To unhide hidden information on a page, press rOPTIONS
and select Reveal.
Cycle subpages
To cycle subpages when these are available, press rOPTIONS
Text sub-pages
A Text page number can hold several subpages. The subpage
numbers are shown on a bar next to the main page number.
and select Cycle subpages.
Language
To switch the group of characters that Text uses to display
correctly, press rOPTIONS and select Language.
To select a subpage, press w or x.
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text, press rOPTIONS and
select T.O.P. overview.
Text setup
Text language
Some digital TV broadcasters have several Text languages
available.
Search Text
You can select a word and scan Text for all occurrences of this
word.
More TV / Text
35
Download from Www.Somanuals.com. All Manuals Search And Download.
To set your primary and secondary Text language, press h >
Set up > Channel settings and select Primary or Secondary Text
and select your preferred Text languages.
Text 2.5
If available, Text 2.5 offers more colours and better graphics. Text
2.5 is activated as a standard factory setting.
To switch it off, select h > Setup > TV settings > Preferences
> Text 2.5.
36
More TV / Text
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Videos, photos and music
To pause or play, press OK.
To play the next file in the folder, press W.
To play to the previous file, press X.
To fast forward, press x.
Browse USB
You can view photos or play your music and videos from a USB
memory device.
To rewind, press w.
Insert a USB device into the USB connection on the left-hand
side of the TV while the TV is switched on. The TV detects the
device and opens a list showing its content. If the list does not
appear automatically, press h, select Browse USB and press
OK.
Options for music and videos
Press rOPTIONS to select the following:
• Stop
• Play once / Repeat
• Shuffle on / off
Music with photos
You can play music and show photos at the same time. Start the
photo slideshow after you started the music.
1 Select a folder with music files and press OK.
2 Select a folder with photo files and press OK.
To stop, press rOPTIONS and select Stop.
Mute screen
If you only listen to music, you can mute the TV screen to save
energy.
To mute the screen, press the green key, select Mute screen and
press OK. To switch the screen back on, press any key on the
remote control.
See the list of compatible playback formats in Help >
Specifications > Multimedia.
Browse PC
You can view photos or play your music and videos from a PC in
your home network.
The TV is DLNA certified and is compatible with other DLNA
certified devices.
What you need
To browse your PC files, you need to connect the TV to your
home network. Also, do not forget to set your media server
software to share the files with the TV.
To close Browse USB, press h and select another activity or
disconnect the USB device.
View photos
Browse PC
To view photos, select a photo in the list and press OK. If there
are more photos in the folder, the TV starts a slideshow with
these photos.
To stop, press rOPTIONS and select Stop.
To browse your PC files, press h, select Browse PC and press
OK.
To close Browse PC, press h and select another activity.
To pause or play the slideshow again, press OK.
To view the next photo, press W.
To view the previous photo, press X.
If the network is not yet installed when you select Browse PC,
the Network installation starts automatically. Follow the
instructions on screen.
Options for photos
Press rOPTIONS to select the following:
• Show info
To select, view and play your files, read Help > More TV >
Videos, photos and music > Browse USB.
• Stop
Find the list of compatible playback formats and compatible media
• Play once / Repeat
• Rotate
• Shuffle on / off
• Slideshow speed
• Slideshow transition
• Set as Scenea
server software in Help > Specifications > Multimedia.
Read more about connecting to a network in Help > Setup >
Network.
Scenea
Shuffle on
Plays the files randomly.
With Scenea, you can set a photo as a painting on your TV
screen. Select your favourite photo from your collection.
To open Scenea, press h, select Scenea and press OK. If you
did not yet select a photo of your own, a preset photo is shown.
To close the Scenea photo, press a key on the remote control.
Set as Scenea
Sets the current photo as a wallpaper photo for Scenea.
Play videos or music
To play videos or music, select the file in the list and press OK.
If there are more music or video files in the folder, the TV plays
the files one after the other. To stop, press rOPTIONS.
More TV / Videos, photos and music
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Select a photo for Scenea
1 Select a photo from a connected USB device or from a
connected PC. This photo must be in JPEG format.
2 With the photo highlighted in the Browse USB or Browse PC
list, press rOPTIONS, select Set as Scenea and press OK. By
agreeing to overwrite the current photo, the new photo is set.
Scenea lounge light
To switch off Ambilight when Scenea is on, press tADJUST. Or
press Ambilight on the front of the TV.
Energy saving
To switch the TV to the energy saving mode, press tADJUST,
select Smart picture and press OK. Select Energy saving.
Wi-Fi MediaConnect Help
Specifics
To read the Wi-Fi MediaConnect Help, right-click the TV icon in
the taskbar of the PC and select Help.
With Scenea switched on, the TV will automatically switch to
standby after 4 hours. You will be warned 1 minute before
switch off. This automatic switch to standby prevents unnecessary
energy use in case you forget that Scenea is on.
Specifics
The playback of video can be affected by your PC performance
and your wireless network bandwidth.
If the sleep timer is set, the TV will also switch to standby after
the set time has elapsed.
Scenea has no sound.
You can project high definition (HD) or standard definition (SD)
video, depending on the processing power of your PC.
The content protection on most DVD or Blu-ray Disc movies
might restrict watching the movie on a TV when the disc is
playing on a PC.
Wi-Fi Media Connect
The TV shows PC media files with a small delay.
With Wi-Fi MediaConnect you can bring up (project) your PC
screen on to the TV screen wirelessly. You can project video,
music, presentations or other content playing on your laptop or
desktop PC.
Before you can project the PC screen on to TV, you must install
the Wi-Fi MediaConnect software on your PC.
Read more about installing the Wi-Fi MediaConnect software in
Help > Setup > Network > Wi-Fi MediaConnect.
Start projecting
To start projecting the PC screen on to the TV, click on the
small TV icon in the taskbar at the bottom right of the PC
screen. Your PC screen appears on your TV screen.
Stop projecting
To stop projecting, click on the TV icon again.
38
More TV / Videos, photos and music
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Games
Play a game
Add a game console
In the Home menu, start Add your devices to add the console
to the Home menu for easy selection later on. When adding a
game console to the Home menu, select Game when the TV
asks for the device type. If your game console is an EasyLink
HDMI-CEC device it might add itself to the Home menu.
Smart setting - Game
The Smart picture setting Game sets the TV to the ideal Game
settings without picture lag.
If your game console is added as Game in the Home menu, the
TV switches to the Game setting automatically.
If your game console has added itself in the Home menu as a
Blu-ray Disc player or DVD player, you need to switch the
Smart picture setting to Game before you start playing.
To switch the Smart picture setting to Game, press tADJUST
and select Smart picture > Game and press OK. The TV is ready
for gaming. Do not forget to switch back to your normal Smart
picture setting when you stop gaming.
Read more about how to connect a game console in Help >
Connections > Connect more devices > Game or HD Game.
More TV / Games
39
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Locks and timers
Child locks
To prevent children from watching a channel or a programme,
you can lock channels or lock age-rated programmes.
Parental rating
Some digital broadcasters have rated their programmes. When
the rating is equal or higher than the rating you have set for your
child’s age, the programme will be locked.
To watch a locked programme you must enter the child lock
code. The parental age rating is set for all channels.
Set an age rating
Press h and select Setup > Channel settings and select Child
lock > Parental rating.
To select an age rating, you must first enter your 4-digit child
lock code. If no child lock code is set, you can set the code
now.
When the code is entered, you can select the age rating. When
the rating of a programme is equal or higher than the rating you
have set for your child's age, the programme will be locked. The
TV will ask for the code to unlock the programme. For some
operators, the TV only locks programmes with a higher rating.
Lock a channel
To lock a channel, press h and select Setup > Channel settings
and select Child lock > Channel lock. In the list of channel
numbers, select a channel and press OK to lock a channel.
In the list, a locked channel is marked with an X. Now, you can
select another channel to lock or unlock. The lock is activated as
soon as you close the menu.
You cannot lock programmes from connected devices.
Change code
To change the current lock code, press h and select Setup >
Channel settings and select Child lock > Change code.
Enter the current code and then enter the new code twice. The
new code is set.
Forgotten your code?
To override the code if you forget it, enter 8888.
Sleep timer
With the sleep timer, you can set the TV to switch to standby
automatically after a specified time.
To set the sleep timer, press h > Setup > TV settings >
Preferences > Sleep timer. With the slider bar you can set the
time up to 180 minutes in increments of 5 minutes. If set to 0
minutes, the sleep timer is switched off.
You can always switch off your TV earlier or reset the time
during the countdown.
40
More TV / Locks and timers
Download from Www.Somanuals.com. All Manuals Search And Download.
— MPEG artefact reduction smooths the digital transitions in the
picture.
— Colour enhancement makes the colours more vivid and
improves the resolution of details in bright colours.
4 Setup
4.1 Picture and sound
— Gamma is a non-linear setting for picture luminance and
contrast. Use the slider bar to set a higher or lower gamma
value.
Smart settings
• PC mode
Sets the TV to the ideal pre-defined computer setting if a
computer has been connected.
If you select a Smart setting in the ADJUST menu, you can again
change the settings of the selected Smart setting with the Picture
and sound settings in Setup. The Smart setting remembers your
changes.
• Light sensor
Adjusts the picture and Ambilight settings automatically to the
lighting conditions of the room.
• Picture format
Reset a Smart setting
To reset a Smart setting to its original values, select the Smart
setting you want to reset in the ADJUST menu. Then press h
> Setup > TV settings, select Reset, press OK and confirm.
Read Help > Use your TV > Watch TV > Picture format.
• Screen edges
Slightly enlarge the picture to hide distorted edges.
• Picture shift
Move the picture up / down or left / right with the cursor keys.
Read more about using Smart picture and sound settings in Help
> Use your TV > Watch TV > Smart picture and sound
settings.
Sound
Picture
In the Sound menu, you can adjust all sound settings individually.
In the Picture menu, you can adjust all picture settings
individually.
To open Sound settings, press h > Setup > TV settings >
Sound.
To open the Picture settings, press h > Setup > TV settings >
Picture.
• Bass
Sets the level of low tones in the sound.
• Treble
Sets the level of high tones in the sound.
• Surround
• Contrast
Sets the contrast level of the picture.
• Brightness
Sets the brightness level of the picture.
• Colour
Sets the surround sound effect from internal speakers.
Sets the level of colour saturation.
• Headphones volume
Sets the volume for the headphone connection of the TV.
• Auto volume levelling
Reduces sudden volume differences like at the beginning of
adverts or when switching from one channel to another.
• Hue
If NTSC is broadcast, hue compensates the colour variations.
• Sharpness
Sets the level of sharpness of fine detail.
• Noise reduction
• Balance
Filters out and reduces the image noise in the picture.
Sets the balance of the left and right speakers to best fit your
listening position.
• Tint
Sets the colours to Normal, Warm (reddish) or Cool (bluish).
Select Custom to set up your own personal settings in the
Custom menu.
Eco settings
• Custom tint
Eco settings bundle the TV settings that help the environment.
Use the slider bar to set the colour temperature of the picture.
While you are watching TV channels, press the Green key to
open Eco settings. Active settings are marked with a ê.
Press again to close.
• Perfect Pixel HD
Controls the advanced settings of the Perfect Pixel HD Engine.
— Perfect Natural Motion removes motion judder and
reproduces smooth movement, especially in movies.
Energy saving
This Smart picture setting sets the picture, together with
Ambilight, in the most ideal energy conscious setting. To switch
on, select Energy saving in Eco settings and press OK.
To switch off Energy saving, select another Smart picture setting.
— LED 400 Hz Clear LCD gives a superior motion sharpness,
better black level, high contrast with a flicker-free, quiet image
and a larger viewing angle.
— Super resolution enables superior sharpness, especially on
lines and contours in the picture.
Screen off
If you only listen to music, you can switch off the TV screen to
save energy. Select Screen off and press OK. To switch the
screen back on, press any key on the remote control.
— Perfect contrast sets the level at which the TV automatically
enhances the details in the dark, middle and light areas of the
picture.
Light sensor
— Dynamic backlight sets the level at which power consumption
can be reduced by dimming the brightness intensity of the screen.
Choose for the best power consumption or for the picture with
the best brightness intensity.
The built-in light sensor automatically adjusts the picture, together
with Ambilight, to the lighting conditions of the room. To switch
on, select Light sensor and press OK. To switch off, press OK
again.
Setup / Picture and sound
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto switch off
If no keys on the TV remote control were pressed during a 4-
hour period, the TV switches off automatically to save energy.
You can switch off this Auto switch off.
If you use the TV as a monitor or use a digital receiver to watch
TV (a set top box - STB) and you do not use the remote
control of the TV, switch off the automatic switch off.
42
Setup / Picture and sound
Download from Www.Somanuals.com. All Manuals Search And Download.
Ambilight colour
4.2 Ambilight
To set the Ambilight colour, select Ambilight colour and press
OK. Select Dynamic, if Ambilight should respond to onscreen
images or select one of the fixed colours. Select Custom if you
want to set a specific fixed colour.
Placement
For the best Ambilight effect :
• Dim the lighting conditions in the room and position the TV
up to 25 cm away from the wall.
• Adjust Ambilight according to the colour of your wall at home
in the Wall colour setting.
• To prevent poor infrared remote control reception, position
your devices out of sight of Ambilight.
Custom colour
To set a Ambilight colour of your own, select Custom in the
Ambilight Colour menu. With Custom selected, you can open
the Custom colour menu. Select Palette to choose your own
colour. Ambilight Custom colour is a fixed (non-dynamic) colour
setting.
Separation
To set the difference in colour level between the lights on each
side of the TV, select Separation. Separation Off gives a dynamic
but uniform Ambilight colour.
TV switch off
To set Ambilight to fade out and switch off a few seconds after
you have switched off the TV, select TV switch off. Allow
Ambilight to fade out and switch off completely before you
switch the TV back on again.
Lounge light mood
Read more about Lounge light mood in Help > Setup >
Ambilight > Lounge light mood.
Scenea lounge light
To always switch off Ambilight when Scenea is switched on,
select Scenea lounge light and select Off.
Adjust
Wall colour
The colour of the wall behind your TV can influence the colour
effect of Ambilight. To correct this influence, select Wall colour
and select a colour that matches the wall colour. Ambilight will
correct its colours to mix best with the colour of the wall behind
the TV.
To open the Adjust menu, press tADJUST.
To close, press t again.
Switch Ambilight on or off
In the Adjust menu, select Ambilight and press OK. Switch
Ambilight On or Off. You can also press Ambilight on the TV.
Lounge light
When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.
To switch Ambilight on while the TV is on standby, press
Ambilight on the TV.
Ambilight dynamic
In the Adjust menu, select Ambilight dynamic and press OK.
Adjust the speed at which Ambilight responds to onscreen
images.
Read more about other Ambilight settings in Help > Setup >
Ambilight > Settings.
To change the Lounge light colour scheme, press Ambilight on
the TV again.
Settings
More Ambilight settings are available in the Ambilight settings
menu in Setup. To change these settings, press h and select
Setup > TV settings > Ambilight.
To switch off Lounge light, press and hold Ambilight on the TV
for 3 seconds.
You can also set up the colour scheme in the Setup menu.
With the TV switched on, press h and select Setup. Select TV
settings > Ambilight > Lounge light mood. Select the colour
scheme with which Lounge light will start up.
Ambilight brightness
To set the Ambilight brightness, select Ambilight brightness and
press OK. Adjust the light output of Ambilight.
Setup / Ambilight
43
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Channels
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as
Reorder and rename
Q . . . LA
• Both TVs have compatible software versions. When you
upload, an on-screen message will warn you if software versions
are not compatible.
You can reorder and rename channels in the Channel list.
To reorder or rename a channel, read Help > Use your TV >
Watch TV > Channel list.
Copy a Channel list
1 Switch on the TV which has its channels installed. Plug in a
USB memory device.
Update channels
2 Press h > Setup > TV settings > Preferences > Channel list
copy > Copy to USB and press OK. To copy the Channel list
from this TV, you might be asked to enter the TV PIN code you
entered during the installation.
The TV puts all installed channels in the Channel list. If you
receive digital channels, you can set the TV to automatically
update the list with new channels. You can also start an update
of the Channel list yourself.
Automatic channel update
3 When copying is done, unplug the USB memory device.
Once a day, at 6 AM, the TV updates the channels and stores
new channels. Empty channels are removed. For new or removed
channels, a message is shown at TV start up. The TV must be in
standby to automatically update channels.
Now you can upload the copied Channel list onto another Philips
TV.
Upload a Channel list
To switch off the message at start up, press h > Setup >
Channel settings and press OK. Select Channel installation >
Channel update message and select Off.
To a TV that's not yet installed
1 Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 Plug in the USB memory device that holds the Channel list of
the other TV.
To switch off the automatic channel update, press h > Setup >
Channel settings and press OK. Select Channel installation >
Automatic channel update and select Off.
Start an update
3 To start the Channel list upload, press h > Setup > TV
settings > Preferences > Channel list copy > Copy to TV and
press OK. You might be asked to enter the TV PIN code of this
TV.
4 The TV notifies if the Channel list is copied to the TV
successfully. Unplug the USB memory device.
To start an update yourself, press h > Setup > Search for
channels and press OK. Select Update channels and press OK.
Press Start. The update can take a few minutes. Follow the
instructions on screen.
Reinstall channels
To an already installed TV
1 Verify the country setting of the TV. (To verify this setting,
press h > Setup > Search for channels > Reinstall channels
and press OK. Press È (Back) and later Cancel to leave the
Search for channels.)
Reinstall channels
To reinstall only the channels, press h > Setup > Search for
channels > Reinstall channels and press OK. Select DVB-T or
DVB-C. The channel search can take a few minutes. Follow the
instructions on screen.
If the country is correct continue with step 2 hereunder.
If the country is not correct, you need to start a reinstallation. To
start the reinstallation, press h > Setup > TV settings >
Reinstall TV and press OK. Select the correct country and skip
the Search for channels. Finish the installation. When done, return
to step 2.
Full installation
To redo a full TV installation, press h > Setup > TV settings >
Reinstall TV and press OK. The installation can take a few
minutes. Follow the instructions on screen.
You can reorder and rename channels in the Channel list.
2 Plug in the USB memory device that holds the Channel list of
the other TV.
Channel list copy
Channel list copy is intended for dealers and expert users.
3 To start the Channel list upload, press h > Setup > TV
settings > Preferences > Channel list copy > Copy to TV and
press OK. You might be asked to enter the TV PIN code of this
TV.
With Channel list copy, you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
and you can offer a predefined channel list setup. The small file
you copy fits every USB memory device.
4 The TV notifies if the Channel list is copied to the TV
successfully. Unplug the USB memory device.
Conditions
DVB-T or DVB-C
• Both TVs are from the same year range.
• Both TVs have the same product type suffix for DVB (H, K, M,
T or D/00) in their type number and have the TV installed for
the same country.
If both DVB-T and DVB-C reception is available in your country
and if this TV is ready to receive DVB-T and DVB-C for your
country, you will have selected one or the other during the
channel installation.
If you want to change the DVB setting to start a new channel
installation, press h > Setup > Channel settings and press OK.
Select Channel installation > Antenna or Cable DVB and press
OK. Select the DVB setting you want.
44
Setup / Channels
Download from Www.Somanuals.com. All Manuals Search And Download.
DVB-C channel installation
In some countries, digital broadcasts do not send UTC -
Coordinated Universal Time information. The daylight saving
change might be ignored and the TV might show an incorrect
time.
For ease of use, all DVB-C settings are set to automatic. If your
DVB-C provider gave you specific DVB-C values, like a symbol
rate or a frequency, enter these values when the TV asks for
them during installation.
To correct the TV clock, press h > Setup > TV settings >
Preferences > Clock and select Country dependent. Select
Daylight saving and select the appropriate setting.
To set the time and date manually, select Manual. Then select
Time or Date.
DVB-T + DVB-C
You can set up your TV for DVB-T and DVB-C. Install one
system followed by the other. When both installations are
complete, the Channel list will show both DVB-T and DVB-C
channels.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you use an antenna, you can reposition the antenna to try and
improve the reception.
To check the reception quality of a digital channel, switch to the
channel and press h > Setup > Channel settings and press
OK. Select Channel installation > Digital : reception test and
press OK.
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select Search and press OK.
To enter a specific digital frequency yourself, select the frequency,
position the arrows on a number with x and w and change the
number with u and v. To check the frequency, select Search
and press OK.
If you use DVB-C to receive channels, the options Symbol rate
mode and Symbol rate are available. For Symbol rate mode,
select Automatic, unless your cable provider gave you a specific
symbol rate value. To enter the symbol rate value, use the
number keys.
Manual installation — Analogue
Analogue TV channels can be manually tuned in channel by
channel.
To install analogue channels manually, press h > Setup >
Channel settings and press OK. Select Channel installation >
Analogue : manual installation and press OK.
1 System
To set up the TV system, select System and press OK. Select
your country or part of the world where you are now.
2 Find channel
To find a channel, select Find channel and press OK. Select
Search and press OK. You can also enter a frequency yourself. If
the reception is poor, press Search again. If you want to store
the channel, select Done and press OK.
3 Fine tune
To fine tune a channel, select Fine tune and press OK. You can
fine tune the channel with u or v. If you want to store the
channel found, select Done and press OK.
4 Store
You can store the channel on the current channel number or as
a new channel number. Select Store current channel or Store as
new channel.
You can redo these steps until you found all available analogue
TV channels.
Clock settings
Setup / Channels
45
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Install channels
4.4 Satellite channels
To install all channels for the satellites you found, press Install.
The installation can take several minutes per satellite.
When the installation is finished, you can find all channels in the
satellite Channel list.
Introduction
As well as the DVB-T and DVB-C reception, this TV has a built-
in satellite DVB-S receiver. With a satellite dish antenna
connected, you can receive digital satellite channels. You do not
need an external satellite receiver.
More settings
For most satellites, you do not need to change the LNB settings
but, if you are searching for a specific satellite on C-band for
instance, you need to set the LNB you use for this satellite to
Single. Or, if you are an expert user, you might need a Custom
setting for the LNBs you use.
Reset
You might have lost track of the settings you set up.
To reset the satellite installation settings to factory settings, select
Reset in Settings and press OK.
Signal reception test
The automatic channel install might have missed a specific channel
or channels from a transponder. You can add a transponder with
Signal reception test. Read Help > Setup > Satellite channels >
Signal reception test.
Dish antenna connection
Read more about the antenna connection for satellite in Help >
Connections > First connections > Satellite antenna.
LNB
Find the list of preset satellites on this TV in Help >
Specifications > Power and reception.
An LNB (Low Noise Block-downconverter) captures the signals
from a satellite and is mounted at the end of the pole on the
dish antenna. The TV can receive signals from 4 different LNBs.
Add or remove
If satellite channels are already installed, you can add an extra
satellite to the installation. You can install channels from 4
different satellites - 4 LNBs.
Installation
With a properly set-up and connected satellite dish antenna, you
can install satellite channels on the TV.
You can install channels from 4 different satellites (4 LNBs).
1 Connection type
Check the Connection type setting before you add a satellite.
The setting One LNB receives only one LNB, the setting DiSEqC
Mini receives only 2 LNBs and the setting DiSEqC 1.0 can
receive 3 or 4 LNBs.
1 Install
To search for satellites and install satellite channels, press h >
Setup > Search for satellite and press OK. If you have already
installed satellites, select Reinstall channels and press OK.
To check the Connection type first, press h > Setup > Search
for satellite and press OK. Select Reinstall channels and select
Settings and press OK. Select Connection type and select the
setting you need for the number of satellites you want to install.
Select Done to close the settings. Press È to close Reinstall
channels.
2 Connection type
Before you start searching for satellites, you must set the
connection type. The connection type will determine the number
of LNBs you can install (the number of different satellites). For
ease of installation, select the correct type for the number of
satellites you want to install.
2 Add a satellite
To add a satellite, press h > Setup > Search for satellite and
press OK. Select Add satellite and press OK. The TV searches
for a satellite on the first free LNB. This can take several minutes.
To set up the connection type, select Settings and press OK.
Select Connection type and select One LNB if you have only
one LNB, select DiSEqC Mini for 2 LNBs or select DiSEqC 1.0
to install 3 or 4 LNBs. Select Done to close the settings.
If no satellites are found, check the antenna connections and the
position of the dish antenna. Select Restart or Next LNB.
If there are no free LNBs, you can remove a satellite first. Read
Remove satellites on the following page.
3 Search for satellites
To start the search, select Start and press OK. The TV searches
for all available satellites. This can take several minutes. If no
satellites are found, check the antenna connections and the
position of the dish antenna.
3 Install channels
If you are satisfied with the added satellite, you can install the
channels.
To install all channels, press Install. The installation can take
several minutes. When installation is complete, you can find the
added channels in the satellite Channel list.
The signal quality shown is not always representative of the signal
quality of all channels on that satellite.
To repeat the search for satellites, select Restart and press OK.
If you are satisfied with the satellites found, you can install all
their channels.
You can remove a satellite from your satellite installation.
To remove a satellite, press h > Setup > Search for satellite.
Select Remove satellite and press OK. Select the satellite you
want to remove and press OK. To confirm, select Yes and press
OK. The satellite and its channels are removed from the
installation.
46
Setup / Satellite channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Update channels
If satellite channels are already installed, you can update the
channel list with possible new channels from all installed satellites.
To update the satellite channels, press h > Setup > Search for
satellite. Select Update channels and press OK. The TV scans
the satellites for new channels and adds them to the list. Empty
channels are removed from the list. The update can take several
minutes per satellite. When the update has finished, the Channel
list for satellites is updated.
Signal reception test
With Signal reception test for satellites, you can check the signal
strength of a satellite or you can add a new satellite channel.
To start Signal reception test, press h > Setup > Search for
satellite. Select Signal reception test and press OK.
1 Select the LNB.
2 If you know the frequency of the transponder (which can hold
several channels), select Frequency and enter it.
3 Select Search and press OK.
4 If the TV finds a frequency and there is a store button shown,
a new transponder has been found.
5 Press Store to add the new transponder with its channel or
channels to the Channel list.
To add another transponder, select Exit and repeat the steps.
Troubleshooting
The TV cannot install the satellite I want
• Check the orientation of the dish antenna.
• Check the setting for the LNB that you use for this satellite.
• Check the connection type in the satellite installation settings.
• Reset all satellite settings if you lost track of the settings you
changed. Read Help > Setup > Satellite channels > Installation.
The reception of a satellite channel is poor
• Check the orientation of the dish antenna.
Sometimes the reception is poor
• Check if the dish antenna is solidly mounted. Strong winds can
move the dish.
• Snow and rain can degrade reception.
Read more about troubleshooting in Help > Troubleshooting.
Setup / Satellite channels
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless installation
4.5 Network
Switch on your router before you start the network installation.
Benefits
To start the wireless network installation, press h, select Setup
> Connect to network and press OK. Follow the instructions on
screen.
Browse PC
If you connect the TV to a home network, you can play photos,
music and videos from your computer or storage device. Once
the network is installed on the TV, you can find and play the files
from your PC on the TV screen.
WPS - Wi-Fi Protected Setup
If your router has WPS (Wi-Fi Protected Setup), go to the
router and press the WPS button. Return to the TV within 2
minutes, select WPS and press OK. The TV connects to your
network. This takes about 2 minutes. Finish the installation.
Net TV
If you connect the TV to a home network, you can link up the
TV to Net TV. Net TV offers Internet services and websites
tailored to your TV. Play music and videos, consult infotainment,
rent movies and much more. Once the network is installed, you
can enjoy the best of the Internet for your TV.
Most new wireless routers have the WPS system and carry the
WPS logo. The WPS system uses WPA security encryption and
cannot be combined with devices on your network that use the
WEP security encryption. If you still need this WEP device in
your network, install with Scan > Standard.
Wi-Fi MediaConnect
With Wi-Fi MediaConnect you can bring up (project) your PC
screen on the TV screen wirelessly. You start Wi-Fi
MediaConnect from your PC.
Scan for routers
If you have several routers in your network, you can select the
network you need. To select a specific network router, press
Scan on the first page of the installation. The routers with WPS
and with the strongest signal are shown first in the list.
What you need
To connect the TV to a home network and the Internet, you
need a router in your home network. The router must be set to
DHCP server on. Use a router with a high-speed (broadband)
connection to the Internet. You can connect the TV wirelessly or
wired.
Select the router you need and press WPS if the router has
WPS. Or press Pin code if you can enter the PIN code in your
router software to connect. Or press Standard to enter the
encryption key manually.
PIN code
To make the secured connection with a PIN code, select PIN
code and press OK. Write down the 8-digit PIN code shown
and enter it in the router software on your PC. See the router
manual where to enter the PIN code.
Standard
To enter the encryption key (the security key) manually, select
Standard and press OK. If you have WPA security on your
router, enter the passphrase with the remote control. To open
the on-screen keyboard, select the text entry field and press OK.
If you have WEP security encryption, the TV asks for the WEP
encryption key in hexadecimal numbers. Find this hexadecimal key
in the router software on your PC. Write down the first key of
the WEP keys list and enter it on TV with the remote control. If
the security key is accepted, the TV is connected with the
wireless router.
If asked, agree to the End User License Agreement.
Wi-Fi Media Connect
With Wi-Fi MediaConnect you can bring up (project) your PC
screen on the TV screen wirelessly. With the supplied Wi-Fi
MediaConnect CD-ROM you can download the software for
free. Wi-Fi MediaConnect is only available for PC.
If you use a wired connection to the router you need a network
(Ethernet) cable.
The TV uses a DLNA-certified protocol. You can use a computer
with Microsoft Windows XP, Vista or Windows 7, Intel Mac
OSX or Linux as the operating system.
What you need
To use Wi-Fi MediaConnect, you need to connect the TV to
your home network. You need a wireless router.
Read more about connecting to a network in Help > Setup >
Network.
Find your PC files
To select your PC files on screen, you need recent media server
software on your computer, like Windows Media Player 11 or
similar. To find your files on the TV, some media server software
must be set up to share the PC files with the TV.
Install Wi-Fi MediaConnect
1 Insert the Wi-Fi MediaConnect CD-ROM into your PC.
2 Your PC starts your Internet browser and opens the Wi-Fi
MediaConnect download page -
check the necessary PC system requirements.
Find the list of supported media server software in Help >
Specifications > Multimedia.
48
Setup / Network
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Enter the code printed on the CD-ROM envelope.
4 Click the 'Download now' button to download the free Wi-Fi
MediaConnect software.
5 Once downloaded, start the file 'Wi-Fi
MediaConnect_setup.exe'. Follow the instructions on screen.
TV network name
If you have more then one TV in your home network, you can
rename this TV. To rename this TV in the network, press h >
Setup > Network settings and select TV network name. To
enter the name, press OK to open the on-screen keyboard or
use the remote control keypad.
To use Wi-Fi MediaConnect on your PC read Help > More TV
> Videos, photos and music > Wi-Fi MediaConnect.
PC requirements
Windows XP, Vista, Windows 7 (PC only)
Minimum PC requirements
• Intel® Pentium Core™ 2 Duo 1.8GHz
• 512MB RAM
• 200MB free hard disk space
• Wi-Fi 802.11g
• Broadband Internet connection
Recommended PC requirements
• Intel® Pentium Core™ 2 Duo 2.1GHz
• 1GB RAM
• 200MB free hard disk space
• Wi-Fi 802.11n for router and PC
• Broadband Internet connection
Wired installation
Connect the router to the TV and switch on your router before
you start the network installation.
To start the network installation, press h, select Setup >
Connect to network and press OK. Follow the instructions on
screen.
The TV constantly searches for a network connection. The router
must be set to DHCP server on.
If asked for, agree to the End User License Agreement.
Read more about how to connect in Help > Connections >
Network > Wired.
Network settings
To open the Network settings, press h > Setup > Network
settings and press OK.
You can view the network type, IP and MAC address, the signal
strength, speed and encryption method etc. You can set DHCP
and Auto IP, the IP configuration settings, DMR and the TV
network name.
Setup / Network
49
Download from Www.Somanuals.com. All Manuals Search And Download.
With a Home Theatre System (HTS) connected to the TV, the
picture on TV and the sound from the HTS should be
synchronised. A mismatch can be visible in scenes with people
talking. When they finish sentences before their lips stop moving.
4.6 Devices
EasyLink HDMI-CEC
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio to video
sync is automatically synchronised and always correct.
With EasyLink HDMI-CEC your TV and the connected devices
can work together. You can use the TV remote control to
operate EasyLink devices. The device needs to be connected with
an HDMI cable. Devices with EasyLink appear automatically in the
Home menu.
Audio sync delay
Other Home Theatre Systems might need to adjust the audio
sync delay to synchronise the audio to video. On the HTS,
increase the delay value until there is a match between picture
and sound. A delay value of 180ms may be required. Read the
user manual of the HTS.
Setup
The TV comes with EasyLink switched on.
Make sure that all HDMI-CEC settings are properly set up on
the connected EasyLink devices. EasyLink might not work with
devices from other brands.
With a delay value set up on the HTS, you need to switch off
Audio Out delay on the TV if the HTS sets an identical delay for
all its incoming audio. To switch off Audio Out delay, press h
and select Setup > TV settings > Preferences > Audio Out
delay. Select Off and press OK.
Switch off EasyLink RC
If you don't want to operate devices with the TV remote
control, you can switch off EasyLink remote control separately.
Press Home h > Setup > TV settings and select EasyLink >
EasyLink Remote Control and select Off.
If you cannot set up a delay on the HTS or its maximum setting
is insufficient, you can switch off the Perfect Natural Motion
picture processing of the TV. To switch off Perfect Natural
Motion, press h and select TV settings > Picture > Perfect
Natural Motion. Select Off and press OK.
Switch off EasyLink
To switch off EasyLink completely, press Home h > Setup >
TV settings and select EasyLink > EasyLink On/Off and select
Off.
HDMI-CEC on other brands
The HDMI-CEC functionality has different names on different
brands. Some examples are: Anynet, Aquos Link, Bravia Theatre
Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully
compatible with EasyLink.
Auto subtitle shift
If you play a DVD or Blu-ray Disc on a recent Philips player, the
TV can move the subtitles upwards. Subtitles will then be visible
whatever Picture format you select. The TV comes with Auto
subtitle shift switched on.
Read more about using EasyLink in Help > Use your TV >
Remote control > Operate devices.
To switch off Auto subtitle shift, press h > Setup > TV
settings > EasyLink > Auto subtitle shift. Select Off.
Add a new device
Devices connected with EasyLink HDMI-CEC automatically show
their activity in the Home menu. A single device can add several
activities. The device must be connected with an HDMI cable.
If your connected device does not appear in the Home menu,
on the device EasyLink may be switched off.
Pixel Plus link
Some other devices, DVD or Blu-ray Disc players, might have
their own picture quality processing. To avoid bad picture quality
caused by interference with the TV processing, the picture
processing of these devices should be disabled. The TV comes
with Pixel Plus link switched on and disables the picture quality
processing of recent Philips devices connected to the TV.
If your connected device does not have EasyLink or is not
connected with an HDMI cable, you need to manually add your
device with Add your devices in the Home menu.
To switch off Pixel Plus link, press h > Setup > TV settings >
EasyLink > Pixel Plus link. Select Off.
Add your devices
In the Home menu, select Add your devices and press OK.
Follow the instructions on screen.
The TV asks you to select the device and the connection to
which the device is connected.
The device or its activities are now added to the Home menu.
Rename a device
To rename a device in the Home menu, select the device and
press rOPTIONS and select Rename. Use the keypad on the
remote control as you do for SMS/text messaging to enter the
new name or press OK to open the on-screen keyboard.
Delete a device
To delete a device or activity from the Home menu, select the
item and press rOPTIONS and then select Remove this
device.
If the device or activity, keeps appearing in the Home menu after
you deleted it, switch off the EasyLink setting on the device to
prevent the icon from being automatically added again.
Audio to Video sync
50
Setup / Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch on
4.7 Universal access
To switch on Key beep, press rOPTIONS, select Universal
access and press OK. Select Key beep and select On.
Switch on
If Universal access does not appear in the Options menu, switch
on Universal access in the Setup. Read Help > Setup > Universal
access > Switch on.
With Universal access switched on, the TV is set for use for
hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the installation,
you can still switch it on in Setup.
To switch on Universal access, press h > Setup > TV settings
> Preferences > Universal access. Select On and press OK.
With Universal access switched on in Setup, the Universal access
option is added in the Options menu. With Universal menu in
the Options menu, you can set specific settings for hearing and
visually impaired people.
Hearing impaired
Some digital TV channels broadcast special audio and subtitles
adapted for hearing impaired people. With Hearing impaired
switched on, the TV automatically switches to the adapted audio
and subtitles, if available.
Switch on
To switch on Hearing impaired, press rOPTIONS, select
Universal access and press OK. Select Hearing impaired, select
On and press OK.
To check whether a hearing impaired audio language is available,
press rOPTIONS, select Audio language and look for an audio
language marked with a î.
If Universal access does not appear in the Options menu, switch
on Universal access in the Setup. Read Help > Setup > Universal
access > Switch on.
Visually impaired
Some digital TV channels broadcast special audio called Audio
Description for visually impaired people. The audio consists of a
narrator describing what is happening in the programme during
the pauses in the normal audio.
Switch on
To switch this visually impaired audio, press rOPTIONS, select
Universal access and press OK. Select Visually impaired and
select On or, if available, select the speakers the adapted audio
should be played from. If available, the TV will play the visually
impaired audio.
Volume - Visually impaired
If available, you can set the volume of the extra commentary.
To check whether a visually impaired audio language is available,
press rOPTIONS, select Audio language and look for an audio
language marked with a Ï.
If Universal access does not appear in the Options menu, switch
on Universal access in the Setup. Read Help > Setup > Universal
access > Switch on.
Key beep
Key beep gives an audio feedback each time you press a key on
the remote control. The volume of the beep is fixed.
Setup / Universal access
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not . . .
• press O twice
• use the O switch on the TV
The TV switches itself off (for 10 seconds) and then back on
again. Please wait.
4.8 Software
Current version
To view the current TV software version, press h > Setup >
Software settings and press OK. Select Current software info
and read Version:
The TV software has been updated. You can use the TV again.
To prevent an accidental update of the TV software, delete the
autorun.upg file from the USB memory device.
Update from Internet
If the TV is connected to the Internet, you may receive a
message from Philips to update the TV software. You need a
high-speed (broadband) Internet connection.
If you receive this message, we recommend you carry out the
update. Select Update. Follow the instructions on screen.
You can also look for new updates yourself. To look for an
update, press h > Setup > Update software and press OK.
Follow the instructions on screen.
When the update is complete, the TV switches off and back on
again automatically. Wait for the TV to switch itself back on. Do
not use the Power switch O on the TV.
Update with USB
It might be necessary to update the TV software. You need a PC
with an high-speed Internet connection and a USB memory
device to upload the software on the TV. Use a USB memory
device with 256MB free space. Make sure that write protection is
switched off.
1 Start
2 Identify
3 Download
4 Update TV
1 Start the update on TV
To start the software update, press h > Setup > Update
software. Select USB.
2 Identify the TV
Insert the USB memory into the side of the TV, select Start and
press OK. An identification file is written on the USB memory
device.
3 Download the TV software
Insert the USB memory into your PC. On the USB memory
device, locate the file update.htm and double click it. Click on
Send ID. If new software is available, download the .zip file. After
the download, unzip the file and copy the file autorun.upg onto
the USB memory device. Do not place this file in a folder.
4 Update the TV software
Insert the USB memory into the TV again. The update starts
automatically. The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
If a power cut occurs during the update, never remove the USB
memory device from the TV. When the power returns, the
update will continue.
At the end of the update, the message Operation succesful
appears on screen. Remove the USB memory device and press
O on the remote control.
52
Setup / Software
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Connections
5.1 First connections
Power cable
Insert the power cable into the power socket of the TV.
When disconnecting the power cable, always pull the plug, never
the cable.
Satellite antenna cable
Locate the F-type satellite antenna connection at the side of the
TV. Attach the satellite antenna cable to this connection.
Although this TV has a very low standby power consumption,
switch off the TV with the power switch to save energy if you
do not use the TV for a long period of time.
Read more about the power switch in Help > To begin > Keys
on the TV > Power switch.
Make sure the power cable is securely inserted into the TV.
Make sure that the power plug in the wall socket is accessible at
all times.
Antenna cable
Locate the antenna connection at the back of the TV. Insert the
antenna cable securely into the Antennaa socket.
Connections / First connections
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy protection
5.2 About cables
DVI and HDMI cables support HDCP (High-bandwidth Digital
Contents Protection). HDCP is a copy protection signal that
prevents copying content from a DVD disc or Blu-ray Disc. Also
referred to as DRM (Digital Rights Management).
Cable quality
Before you connect devices to the TV, check which connectors
are available on the device. Connect the device to the TV with
the highest quality connection available. Good quality cables
ensure a good transfer of picture and sound. Read the other
chapters of About cables.
Y Pb Pr
Use the Component Video YPbPr connection together with an
Audio Left and Right connection for sound.
The connections diagrams shown in Help > Connections >
Connect devices are recommendations. Other solutions are
possible.
Match the YPbPr connector colours with the cable plugs when
you connect. YPbPr can handle High Definition (HD) TV signals.
HDMI
An HDMI connection has the best picture and sound quality.
One HDMI cable combines video and audio signals. Use an
HDMI cable for High Definition (HD) TV signals. An HDMI cable
transfers picture and sound signals in only one direction (except
for the HDMI ARC). Do not use an HDMI cable longer than
5 m.
SCART
A SCART cable combines video and audio signals. SCART
connectors can handle RGB video signals but cannot handle High
Definition (HD) TV signals.
EasyLink HDMI-CEC
If your devices are connected with HDMI and have EasyLink, you
can operate them with the TV remote control. Read more about
EasyLink in Help > Use your TV > Remote control > Operate
devices.
HDMI ARC connection
Connect a Home Theatre System to the HDMI ARC connection.
With HDMI ARC, the extra audio cable from the TV to the HTS
is not necessary. With one HDMI cable connected to HDMI
ARC (Audio Return Channel) both cables are combined.
Switch off HDMI ARC
In case you would like to switch off the audio return signal on
the HDMI ARC connection, press h > Setup > TV settings >
EasyLink > HDMI 1 ARC, select Off and press OK.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a DVI
connection. Use one of the HDMI connections and add an Audio
L/R cable (mini-jack 3.5 mm) to Audio In DVI/VGA for sound,
on the back of the TV.
54
Connections / About cables
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
If you have a device with only a Video (CVBS) connection, you
need to use a Video to SCART adapter (not supplied). Connect
the adapter to the SCART connection of the TV. You can add
the Audio L/R connections (mini-jack 3.5 mm).
VGA
Use a VGA cable (DE15 connector) to connect a computer to
the TV. With this connection you can use the TV as a computer
monitor. You can add an Audio L/R cable for sound (mini-jack
3.5 mm).
To connect a computer with the VGA connection, read Help >
Connections > Connect more devices > TV as PC monitor.
Connections / About cables
55
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Connect devices
SoundBar
Use an HDMI cable to connect the device to the TV.
If you use the HDMI-ARC connections on both TV and device,
no other cable is needed. If not, read on.
If you do not use the HDMI-ARC connection, add a digital audio
cable (cinch coaxial).
Blu-ray Disc / DVD player
Use an HDMI cable to connect the device to the TV.
56
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Theatre System with disc player
Use an HDMI cable to connect the device to the TV.
If you use the HDMI-ARC connections on both TV and device,
no other cable is needed. If not, read on.
If you do not use the HDMI-ARC connection, add a digital audio
cable (cinch coaxial).
Connections / Connect devices
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio to Video synchronisation (sync)
If the sound does not match with the video on screen, you can
set a delay on most DVD Home Theatre Systems to match the
sound and video.
Read more about Audio to Video sync in Help > Setup >
Devices > Audio to Video sync.
Do not connect the audio signal from a DVD player or other
device directly to the Home Theatre System. Always route the
sound through the TV first.
Recorder
Use 2 antenna cables to connect the antenna to the device and
the TV.
Add an HDMI cable to connect the device to the TV.
58
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital receiver / Sat.
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
Use 2 antenna cables to connect the antenna to the device and
the TV.
Add an HDMI cable to connect the device to the TV.
Dig. receiver + Disc Recorder
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
First, use 3 antenna cables to connect the devices to the TV.
Connections / Connect devices
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Then use an HDMI cable to connect the digital receiver to the
TV.
Finally, use an HDMI cable to connect the Disc Recorder to the
TV.
Dig. receiver + Disc-R + Home Theatre
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
60
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
First, use 3 antenna cables to connect the devices to the TV.
Then use an HDMI cable to connect the digital receiver to the
TV.
Then use an HDMI cable to connect the Disc Recorder to the
TV.
Then use an HDMI cable to connect the Home Theatre System
to the TV.
Connections / Connect devices
61
Download from Www.Somanuals.com. All Manuals Search And Download.
If you do not use the HDMI-ARC connection on the TV and
the device, add a digital audio cable (cinch coaxial).
Digital HD receiver
If you use a digital receiver to watch TV (a set top box - STB)
and you do not use the remote control of the TV, then switch
off the automatic switch off. This will prevent the TV from
switching off automatically after a 4 hour period without a key
press on the remote control of the TV.
To switch off the automatic switch off, press the green key while
you are watching TV channels and select Auto switch off and
select Off.
First, use 2 antenna cables to connect the device to the TV.
62
Connections / Connect devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Use an HDMI cable to connect the device to the TV.
Connections / Connect devices
63
Download from Www.Somanuals.com. All Manuals Search And Download.
5.4 Connect more devices
Game
Connect a game console to the side or back of the TV. You can
use an HDMI, YPbPr or SCART connection. If your game console
only has Video (CVBS) and Audio L/R output, use a Video Audio
L/R to SCART adapter to connect to the SCART connection.
Read more about Games in Help > More TV > Games.
Use an HDMI cable to connect the device to the side of the TV.
Or use a SCART adapter to connect the device to the TV.
HD Game
Use an HDMI cable or YPbPr and Audio L/R cables to connect a
High Definition game console to the TV.
To connect a HD Game console, read Help > Connections >
Connect more devices > Game.
Photo camera
To view photos stored on your digital photo camera, you can
connect the camera directly to the TV. Use the USB connection
on the side of the TV to connect. Switch on the camera after
you made the connection.
64
Connections / Connect more devices
Download from Www.Somanuals.com. All Manuals Search And Download.
If the list with the content of the camera does not appear
automatically, your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read the user
manual of the digital photo camera.
Camcorder
Connect a camcorder to the side or back of the TV. You can
use an HDMI, YPbPr or SCART connection. If your camcorder
only has Video (CVBS) and Audio L/R output, use a Video Audio
L/R to SCART adapter to connect to the SCART connection.
See the following pages to connect your camcorder.
Use an HDMI cable to connect the camcorder to the side of the
TV.
Or use a SCART adapter to connect the device to the TV.
Connections / Connect more devices
65
Download from Www.Somanuals.com. All Manuals Search And Download.
TV as PC monitor
You can connect the TV to your home network wireless. With
Wi-Fi MediaConnect, you can use the TV as a PC monitor. Read
Help > Setup > Network > Wi-Fi MediaConnect.
Read on to connect a computer to the TV as a PC monitor
wired. You can use a VGA cable or a DVI to HDMI adapter.
Use a VGA cable to connect the PC to the VGA connector and
an audio L/R cable to connect the VGA Audio L/R to the back
of the TV.
Use a DVI to HDMI adapter to connect the PC to HDMI and an
audio L/R cable to connect the Audio L/R to the back of the TV.
66
Connections / Connect more devices
Download from Www.Somanuals.com. All Manuals Search And Download.
Ideal TV setting
Set the TV picture format to Unscaled for the sharpest picture
quality. While watching TV, press rOPTIONS, select Picture
format and select Unscaled.
For a list of supported resolutions see Help > Specifications >
Display resolutions.
Decoder
Use a SCART cable to connect a decoder that decodes analogue
antenna channels. Use the EXT1 connector on the back of the
TV.
You have to assign the TV channel as a channel to be decoded.
Then assign the connection where the decoder is connected.
To assign this TV channel, press h > Setup > Channel settings
> Decoder. Select Channel to set up the channel that you want
to decode. Select Status to set the connection you use for the
decoder.
Connections / Connect more devices
67
Download from Www.Somanuals.com. All Manuals Search And Download.
5.5 Network
Wireless
To set up the wireless network connection, read Help > Setup >
Network.
Wired
To set up the wired network connection, read Help > Setup >
Network
Connect the router to the TV with a network cable. To fulfil
EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.
68
Connections / Network
Download from Www.Somanuals.com. All Manuals Search And Download.
5.6 SD card
Memory size
To store videos downloaded from a Video store on Net TV, you
need to insert an SD memory card into the TV SD card slot.
Once formatted, leave the card permanently in the slot.
SD memory card size
Use a SD HC (High Capacity) memory card with at least 4GB of
storage capacity.
For high-definition (HD) video, use an SD card with at least 8GB
of storage capacity. Use a speed class 2 card or more.
Read more about renting videos in Help > More TV > Net TV
> Video stores.
Insert the card
Make sure to unlock the SD memory card before you insert it.
To format the SD card, switch on the TV and insert the SD card
into the SD card slot. The TV will automatically start formatting.
Leave the SD card permanently in the slot.
Connections / SD card
69
Download from Www.Somanuals.com. All Manuals Search And Download.
5.7 Common interface CAM
CAM
Scrambled digital TV channels can be decoded with a Conditional
Access Module (CAM). Digital TV service operators provide the
CAM when you subscribe to their services. Contact a digital TV
service operator for more information and to see terms &
conditions.
Insert a CAM
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion. Incorrect
insertion can damage the CAM and the TV.
Look for the common interface slot on the back of the TV.
Gently insert the CAM as far as it will go and leave it in the slot
permanently.
It can take a few minutes before the CAM is activated. Removing
the CAM will deactivate the service on TV.
Watching a CAM service
If a CAM is inserted and subscription fees have been paid, the
TV shows the programme from the digital TV service provider.
The applications, their function, the content and the onscreen
messages all come from the CAM service.
CAM settings
To set passwords or PIN codes for the CAM service, press h
> Setup > Channel settings > Common Interface. Select the
CAM provider and press OK.
CI+
This TV can handle the CI+ conditional access.
CI+ allows service providers to offer premium HD digital
programmes like movies and sports with a high level of copy
protection.
To insert a CI+ CAM, read chapter CAM - Conditional Access
Module.
70
Connections / Common interface CAM
Download from Www.Somanuals.com. All Manuals Search And Download.
5.8 3D
3D
This TV is prepared for the 3D Full HD accessory PTA02 (sold
separately).
PTA02 Installation
1 Switch off the TV.
2 Connect the 3D transmitter to the 3D connection 3D Out on
the back of the TV.
3 The software update will start automatically and during the
update the TV might switch off and on again. Do not press any
key on the remote control and wait until the message 'Operation
Successful' appears.
4 Unplug the USB device and switch the TV off and back on
again.
Your TV is ready to watch 3D.
3 Install the 3D transmitter on the top or at the bottom of the
TV. Make sure to point the transmitter directly to where you sit
to watch TV.
The small window in the middle of the glasses receives the 3D
signals from the transmitter.
Update the TV software
To prepare your TV for 3D watching, you must update the TV
software.
1 Switch on the TV.
2 Plug in the USB device in the USB connection at the side of
the TV.
Connections / 3D
71
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Troubleshooting
6.1 Contact information
If the advice and suggestions in Troubleshooting do not help
resolve the problem, try switching the TV off and back on again.
Warning
If your TV breaks down, NEVER try to repair the TV yourself.
Consumer Care
If the TV problem is not solved you can call the Philips
Consumer Care hotline in your country. Look up the TV model
and serial number before you call. Find the telephone number on
the documentation that came with the TV. Or consult our
website www.philips.com/support
TV model number and serial number
Find these numbers on the packaging label or on the type label
on the back or bottom of the TV.
72
Troubleshooting / Contact information
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 TV and remote control
The TV does not switch on
• Switch the TV off and on again with the switch on the bottom
of the TV.
• Check the power cable connection.
• Try using the keys on the TV to switch on.
The TV does not switch on from standby
• Check that the batteries of the remote control are not empty
or weak. Check their + / - orientation.
• Try using the keys on the TV to switch on.
The TV does not respond to the remote control
• Check that the batteries of the remote control are not empty
or weak. Check their + / - orientation.
• Clean the remote control and TV sensor lens.
• During start-up, which can take up to two minutes with
connected devices, the TV and some external devices do not
immediately respond to commands from the remote control. The
device is functioning normally and is not broken.
The TV switches off and the red light flashes
• Switch the TV off and on again with the switch at the bottom
of the TV. Check if there is enough space for ventilation. Wait
until the TV has cooled down.
If the TV does not restart from standby and the light flashes
again, call Consumer Care.
You forgot your code to unlock Child lock?
Read Help > More TV > Locks and timers > Child lock.
Troubleshooting / TV and remote control
73
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 TV channels
Some TV channels are gone
• Check if the correct list is selected in the Channel list. Press
¬FIND to open the Channel list, then press rOPTIONS and
select the list you need with Select list.
• A channel could be hidden in the Channel list. Read more
about Channel list in Help > Use your TV > Watch TV >
Channel list.
No digital channel found during installation
• Check if the TV supports DVB-T or DVB-C in your country.
Check the 'Digital TV Country Compatibility' sticker on the back
of the TV.
74
Troubleshooting / TV channels
Download from Www.Somanuals.com. All Manuals Search And Download.
6.4 Picture and sound
No picture
• Check if the antenna is connected properly.
• Check if the correct device is selected and connected properly.
• Check the contrast or brightness setting in h > Setup > TV
settings > Picture > Contrast or Brightness.
The picture is poor
• Bad weather can influence the picture quality.
• Check if the antenna is connected properly.
• Non-earthed audio devices, neon lights, high buildings or
mountains can influence the picture quality. Try to improve the
picture by changing the position of the antenna or placing devices
away from the TV.
• Check that the correct TV system is chosen in the Manual
installation menu.
• If only a certain channel is poor, try to fine tune this channel
with the Fine tune menu.
Read Help > Setup > Channels > Manual installation - Analogue.
The picture has poor colour
• Check the colour settings in h > Setup > TV settings. Or
press rOPTIONS to select a Smart picture setting.
Picture delay when a game console is connected
• To prevent picture delay, press rOPTIONS, select Smart
picture > Game.
The TV does not remember my settings when I switch it back
on
• Check whether the TV is set to the Home location. Press h
> Setup > TV settings > Preferences > Location.
The picture does not fit the screen
• Press rOPTIONS, Picture format and select Auto fill.
The picture position on screen is not correct
• To correct a shifted picture, press rOPTIONS and select
Picture shift. Use the navigation keys to adjust the picture
position. Press OK to stop Picture shift.
• If distorted screen edges are visible, press h > Setup > TV
settings > Picture > Screen edges and use the slider bar to
enlarge the picture slightly.
There is a picture but no sound
• Check the volume is not set to 0.
• Check the sound has not been muted with m.
• Check that all cables are connected properly.
• If no sound signal is detected, the TV automatically switches off
sound. This is proper operation and is not a malfunction.
The sound is poor
• Try any Smart sound setting, press rOPTIONS, Smart
sound.
• Check that the sound is set to Stereo.
The sound comes from one speaker only
• Check the Balance setting. Press h > Setup > TV settings >
Sound > Balance. Use the slider bar to set the balance.
Sound delay
• If there is an audio to video sync mismatch when sound comes
from a Home Theatre System, an audio sync delay needs to be
set up. Read more about Audio to Video sync in Help > Setup
> Devices > Audio to Video sync.
Troubleshooting / Picture and sound
75
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5 Devices
HDMI connections
• The HDMI-HDCP procedure might take a few seconds before
the picture from a device appears.
• If the TV does not recognise the device and there is no
picture, try switching from one device to another and back again
to restart the HDCP procedure. Or switch the device off and
back on again.
• If sound interruptions occur persistently, see the user manual of
the device to check the output settings. If that does not help,
connect an additional audio cable.
• If a DVI to HDMI adaptor is used, check that an additional
audio connection is in place to complete the DVI connection.
EasyLink HDMI-CEC
• Check if the connected device supports the HDMI-CEC
standard and is properly set up. Read the user manual that comes
with the device.
• Check if the HDMI cable is properly connected.
• Check if EasyLink on the TV and device is switched on.
• Make sure that the System audio control in your HDMI-CEC
audio devices is properly set up. Read the user manual that
comes with your audio device.
PC display
• The refresh rate of a PC connected to the TV with VGA or
DVI to HDMI adapter should set to 60Hz.
• Check that the correct resolution mode is selected on your
PC. See the list in Help > Specifications > Display resolutions.
76
Troubleshooting / Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
6.6 Videos, photos and music
The files on my USB device are not shown
• Set your device (camera) to ‘Mass Storage Class’ compliant.
• The USB device may need specific driver software.
Unfortunately, this software cannot be downloaded to your TV.
• Not all audio and picture files are supported. See the list in
Help > Specifications > Multimedia.
Files from a USB device do not play back smoothly
• The transfer performance of the USB device limits the transfer
rate.
The files on my PC are not shown
• To look for files on your home network with Browse PC,
your PC media server software should be set up to share the
files with the TV. See the list of compatible Media server
software in Help > Specifications > Multimedia.
Troubleshooting / Videos, photos and music
77
Download from Www.Somanuals.com. All Manuals Search And Download.
6.7 Network
Wireless network not found or distorted
• Microwave ovens, Dect phones or other WiFi 11b devices in
your neighbourhood might disturb the wireless network.
• Make sure that the firewalls in your network allow access to
the TV wireless connection.
• If the wireless network does not work properly in your home,
try the wired network installation. Read Help > Setup >
Network > Wired installation.
Net TV does not work
• If the connection to the router is OK, check the router
connection to the Internet.
Browse PC or Net TV work slow
• Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
• You need a high-speed (broadband) Internet connection for
your router.
78
Troubleshooting / Network
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Specifications
7.1 Software
Software version
To view the current TV software version, press h > Setup >
Software settings and press OK. Select Current software info
and read Version:.
Open source software
This television contains open source software. Philips hereby
offers to deliver, upon request, a copy of the complete
corresponding source code for the copyrighted open source
software packages used in this product for which such offer is
requested by the respective licences.
This offer is valid up to three years after product purchase to
anyone in receipt of this information. To obtain the source code,
If you prefer not to use email or if you do not receive a
confirmation receipt within a week after mailing to this email
address, please write in English to . . .
Open Source Team, Philips Electronics
Intellectual Property and Standards
P.O. Box 220
5600 AE Eindhoven
The Netherlands
Read the Open Source Licences in Help > To begin > Open
Source Licences.
Specifications / Software
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Your product contains batteries covered by the European
Directive 2006/66/EC, which cannot be disposed with normal
household waste.
7.2 Environmental
Energy saving
Light sensor
To save energy, the built-in ambient light sensor lowers the
brightness of the TV screen when the surrounding light darkens.
Energy saving
The energy saving Smart picture setting, combines several TV
settings that result in saving energy.
Low standby power
The class-leading and highly advanced power circuitry brings down
the power consumption of the TV to an extremely low level,
without losing out on the constant Standby functionality.
Please find out for yourself about the local rules on separate
collection of batteries because correct disposal will help to
prevent negative consequences for the environment and human
health.
Power management
The advanced power management of this TV ensures the most
efficient use of energy. You can check how your personal TV
settings, the level of brightness in current onscreen pictures, and
the surrounding light conditions determine the relative power
consumption.
To check the relative power consumption, press h > Setup
and press W. Select Watch demos > Active control and press
OK. Select a Smart setting to check the corresponding values.
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a
product it means that the product is covered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not dispose of
your old products with your normal household waste. Correct
disposal of your old product helps to prevent potential negative
consequences for the environment and human health.
80
Specifications / Environmental
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Power and reception
Power
Product specifications are subject to change without notice. For
more specification details of this product, see
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Standby power consumption : < 0.15W
• Power saving features : Light sensor, Eco mode, Picture mute
(for radio), Auto switch-off timer, Eco settings menu.
Reception
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband, S-Channel, UHF, VHF
• DVB : DVB-T (terrestrial, antenna) COFDM 2K/8K, DVB-C
(cable) QAM
• Analogue video playback : NTSC, SECAM, PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC 13818-2),
MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
• See selected countries on the TV type plate
• Satellite aerial input : 75 ohm F-type
• Input frequency range : 950 to 2150MHz
• Input level range : 25 to 65 dBm
• DVB-S/S2 QPSK, symbol rate 2 to 45M symbols, SCPC and
MCPC
• Preset for satellites : Astra (19.2°E), Astra (23.5 °E), Astra (28.2
°E), Hotbird (13.0 °E), TürkSat (42.0 °E)
• Astra HD+ support
• LNB : DiSEqC 1.0, 1 to 4 LNBs supported, Polarity selection
14/18V, Band selection 22kHz, Tone burst mode, LNB current
300mA max
• See selected countries on the TV type plate
Specifications / Power and reception
81
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 Display and sound
Display / Picture
• Diagonal size :
- 40PFL9705 : 102cm / 40"
- 46PFL9705 : 116cm / 46"
• Picture enhancement :
- Perfect Pixel HD Engine
- LED Pro
- 400Hz Clear LCD*
• Display type : LCD Full HD, 2D segmented LED backlight
• Panel resolution : 1920 x 1080p
• Color processing : 2250 trillion colors 17bit RGB
• Brightness : 500 cd/m2
• Dynamic contrast : 10.000.000:1
• Response time (typical) : 0,5 (BEW equiv.) ms
* 400Hz Clear LCD : displays 400 scenes per second by
combining advanced 200Hz technology with scanning backlight @
50% dutycycle.
Sound
• Output power (RMS) : 2 x 15W
• Dolby Digital Plus, Dolby Pulse - Dolby and the double-D
symbol are registered trademarks of Dolby Laboratories.
• Speaker types : 2 dome tweeters, 2 woofers
82
Specifications / Display and sound
Download from Www.Somanuals.com. All Manuals Search And Download.
7.5 Display resolutions
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz
• 1080p - 50 Hz, 60 Hz
Computer formats
Resolution — Refresh rate
• 640 x 480p — 60 Hz (VGA/HDMI)
• 800 x 600p — 60 Hz (VGA/HDMI)
• 1024 x 768p — 60 Hz (VGA/HDMI)
• 1280 x 768p — 60 Hz (VGA/HDMI)
• 1360 x 765p — 60 Hz (VGA/HDMI)
• 1360 x 768p — 60 Hz (VGA/HDMI)
• 1280 x 1024p — 60 Hz (HDMI)
• 1920 x 1080i — 60 Hz (HDMI)
• 1920 x 1080p — 60 Hz (HDMI)
Specifications / Display resolutions
83
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6 Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11b/g/n (built-in)
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers : MPEG Program Stream, MPEG Transport Stream,
AVI, MPEG-4, Matroska, Windows Media, ASF
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2, MPEG-4
AVC (H264), WMV9
• Audio Codecs : MP3, AAC, HE-AAC V1, HE-AAC V2, WMA,
AC3
• Image Codecs : JPEG
• Limitations : WMA (V2 up to V9.2), MPEG-4 AVC (up to level
4.0)
Supported DLNA media server software (DMS)
• Windows Media Player 11 (for Microsoft Windows XP, Vista
or Windows 7)
• TVersity 1.9.3 (pro) (for Windows XP)
• Twonky Media — PacketVideo 4.4.9 (for PC and Intel MacOX)
• Nero 9 — Nero MediaHome (for Microsoft Windows XP)
• Sony Vaio Media Server (for Microsoft Windows XP or Vista)
• Sony PS3 media server (for Windows XP)
• Google Media Server (Google desktop) (for Windows XP)
• DiXiM (for Windows XP)
• Macrovision Network Media Server (for Windows XP)
• Philips NAS SPD8020 (v. 1.2.9.47)
• Fuppes (for Linux)
• uShare (for Linux)
Supported DLNA mobile devices (DMS/DMC)
• Nokia N78, N80, N81, N82, N92, N93, N93i, N95, N96,
N800, N810
• Samsung SGH-i780
ESD regulations
This apparatus meets performance criteria A for ESD. In case the
apparatus does not recover in DLNA mode due to electrostatic
discharge, user interference is required.
84
Specifications / Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
7.7 Connectivity
TV Rear
• EXT1 Scart : Audio L/R, CVBS in, RGB
• EXT2 Scart : Audio L/R, CVBS in, RGB
• EXT3 : Y Pb Pr, Audio L/R
• VGA (D-sub 15), Audio In (stereo mini-jack 3.5mm)
• HDMI 1 - ARC in (HDMI v1.4)
• HDMI 2 in (HDMI v1.3)
• HDMI 3 in (HDMI v1.3)
• Audio In (DVI to HDMI)(stereo mini-jack 3.5mm)
• Audio Out L/R — display synchronised (coaxial-cinch-S/PDIF)
• Headphones (stereo mini-jack 3.5mm)
• Network — (RJ45)
• 3D Out
TV Side
• HDMI Side in (HDMI v1.3)
• 2x USB
• Common interface slot (CAM)
• SD card slot (SD High Capacity)(as Video stores memory)
Specifications / Connectivity
85
Download from Www.Somanuals.com. All Manuals Search And Download.
7.8 Dimensions and weights
40PFL9715
Width 955 mm
Height 596 mm
Depth 69mm
Weight ±14 kg
. . . with TV stand
Height 632 mm
Depth 240 mm
Weight ±16 kg
46PFL9715
Width 1088 mm
Height 671 mm
Depth 69 mm
Weight ±19 kg
. . . with TV stand
Height 707 mm
Depth 260 mm
Weight ±22 kg
UMv 3104 327 0053.2 - 110331
86
Specifications / Dimensions and weights
Download from Www.Somanuals.com. All Manuals Search And Download.
L
Index
Lock code 40
M
A
Media server software 84
Music with photos 37
Adjust menu 21
Age rating, satellite 29
Ambilight colour 43
Ambilight, setup 43
Ambilight, switch on 43
Audio Description 51
Audio Out delay 50
Auto switch off 42
N
Net TV 32
Net TV, connection 32
Net TV, open 32
Network, wired connection 68
Network, wired installation 49
Network, wireless installation 48
B
Balance 41
Black bars 25
O
One Touch Play 19
Online, rental video 33
Open source software 79
Options menu 22
C
CAM 70
Channel list copy 44
Channel list, options 23
Channel, favourite 24
Channel, rename 24
Channel, reorder 23
Channel, switch 23
Channel, update 44
CI+ 70
P
Parental rating 40
Parental rating, satellite 29
PC, browse 37
PC, connect 37
PC, monitor 66
Perfect Pixel HD Engine 41
Photos 37
Clock 45
Common interface slot 70
Component Video YPbPr 54
Connections 54
Consumer Care 72
Photos, slideshow 37
Picture settings 41
Picture shift 22
Play videos 37
Power consumption 80
Product recycling 80
D
Device, add 21
Device, remove 21
Device, rename 21
Device, reorder 21
Digital Text 35
DVB 44
R
Radio channels 23
Reception quality 45
Router 48
S
DVD player, connect 56
DVI to HDMI adapter 54
Satellite channel, favourite 29
Satellite channel, remove 46
Satellite channel, rename 28
Satellite channel, reorder 28
Satellite channel, signal 47
Satellite channel, update 47
Satellite, add 46
E
EasyLink, remote control 50
Eco settings 41
Encryption method 48
ESD 84
Satellite, installation 46
Satellite, LNB 46
F
Satellites, search for 46
Screen edges 41
Find 21
SD card, install 69
SD memory card 33
Select list 23
Smart setting, sound 25
Smart settings, reset 41
Software, current version 52
Software, Internet update 52
Software, USB update 52
Sound settings 41
G
Game console 39
Gamma 41
H
HD TV
HD video clip
HDMI ARC 54
6
6
HDMI connection 54
Headphone volume 41
Help, Search 17
Subtitle, auto shift 50
Subtitles, language 31
Subtitles, On during mute 31
Surround mode 19
Home menu 21
Home network 48
Surround sound 22
System standby 19
I
Infrared sensor 19
Interactive TV 34
T
Text, dual screen 35
Text, freeze 35
Text, setup 35
K
Keyboard, on screen 24
Index
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Text, T.O.P. overview 35
TV network name 49
TV tour
5
U
Universal access 51
USB, browse 37
V
Video (CVBS) connection 55
Video selection 23
W
Wall colour 43
Watch satellite 28
Watch TV 23
WEP security encryption 48
WPA security encryption 48
WPS (Wi-Fi Protected Setup) 48
Index
88
Download from Www.Somanuals.com. All Manuals Search And Download.
(XURSH
&(ꢀ'HFODUDWLRQꢀRIꢀFRQIRUPLW\
(QJOLVK
!"#$"%
,WDOLD
+HUHE\ꢆꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGHFODUHVꢀWKDWꢀWKLVꢀWHOHYL=
VLRQꢀLVꢀLQꢀFRPSOLDQFHꢀZLWKꢀWKHꢀHVVHQWLDOꢀUHTXLUHPHQWVꢀDQGꢀRWKHUꢀ
%3"3120')-%&1,.,&0.)&J)K,%34',13)@AAABCBDH6
!"#"$%&''()*+,",-.)/00&12',13)!--",42',&0.)5676)08,"2'9&:&;()+&<8)2)
WHOHYt]LyꢀPHJIHOHOꢀDꢀYRQDWNR]yꢀDODSYHWʼnꢀN|YHWHOPpQ\HNQHNꢀpVꢀD]ꢀ
ꢁꢂꢂꢂꢃꢄꢃ(&ꢀLUiQ\HOYꢀHJ\pEꢀHOʼntUiVDLQDNꢅ
6LVWHPDꢀ79ꢀZLUHOHVV
,QIRUPDWLRQLꢀVXOOHꢀQRUPDWLYHꢀDSSOLFDELOL
*3%),");3%42'&),'2",20&
'HXWVFK
ćHVN\
‡ꢀXVRꢀSULYDWRꢈꢀ'HFUHWRꢀOHJLVODWLYRꢀꢅꢀꢉꢄꢂꢀꢁꢃꢊꢃꢉꢋꢋꢌꢀ&RGLFHꢀGHOOHꢀFRPX=
QLFD]LRQHꢀHOHWWURQLFKHꢅꢀ,QꢀSDUWLFXODUHꢆꢀO·DUWLFRORꢀꢁꢋꢍꢀVSHFLÀFDꢀLꢀFDVLꢀLQꢀ
FXLꢀRFFRUUHꢀULFKLHGHUHꢀXQꢀDXWRUL]]D]LRQHꢀJHQHUDOHꢆꢀPHQWUHꢀO·$UWꢅꢀꢁꢋꢄꢀ
LQGLFDꢀLꢀFDVLꢀLQꢀFXLꢀO·XWLOL]]RꢀqꢀOLEHUR
‡ꢀUHJRODPHQWD]LRQHꢀGHOODꢀIRUQLWXUDꢀGHOO·ꢀDFFHVVRꢀ5/$1ꢀGHOꢀSXEEOLFRꢀ
DOOHꢀUHWLꢀHꢀDLꢀVHUYL]LꢀSXEEOLFLꢀGLꢀFRPXQLFD]LRQHꢀHOHWWURQLFDꢀꢎHVꢅꢀVLVWHPDꢀ
79ꢀZLUHOHVVꢏꢅꢀ'HFUHWRꢀPLQLVWHULDOHꢀꢉꢊꢃꢄꢃꢉꢋꢋꢌꢀHꢀUHODWLYHꢀPRGLÀFKHꢆꢀHꢀ
$UWꢅꢀꢉꢄꢀꢎDXWRUL]]D]LRQHꢀJHQHUDOHꢀSHUꢀUHWLꢀHꢀVHUYL]LꢀGLꢀFRPXQLFD]LRQHꢀ
HOHWWURQLFLꢏꢀGHOꢀ&RGLFHꢀGHOOHꢀFRPXQLFD]LRQHꢀHOHWWURQLFKH
‡ꢀXVRꢀSULYDWRꢈꢀ'HFUHWRꢀPLQLVWULDOHꢀꢁꢉꢃꢐꢃꢉꢋꢋꢐ
L,3%;,')3%9"G%')*+,",-.)/00&12',13)!--",42',&0.)5676)?2..).,4+)?2.)
)HUQVHKJHUlWꢀLQꢀhEHUHLQVWLPPXQJꢀPLWꢀGHQꢀJUXQGOHJHQGHQꢀ$QIRUGHU=
XQJHQꢀXQGꢀGHQꢀEULJHQꢀHLQVFKOlJLJHQꢀ%HVWLPPXQJHQꢀGHUꢀ5LFKWOLQLHꢀ
ꢁꢂꢂꢂꢃꢄꢃ(*ꢀEHÀQGHWꢅ
3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀWtPWRꢀSURKODåXMHꢆꢀçHꢀWHQWRꢀWHOHYL]RUꢀ
MHꢀYHꢀVKRGĖꢀVHꢀ]iNODGQtPLꢀSRçDGDYN\ꢀDꢀGDOåtPLꢀSŏtVOXåQîPLꢀXVWDQR=
YHQtPLꢀVPĖUQLFHꢀꢁꢂꢂꢂꢃꢄꢃ(6ꢅ
6ORYHQVN\
)UDQoDLV
3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀWîPWRꢀY\KODVXMHꢆꢀçHꢀWHQWRꢀWHOHYt]RUꢀ
VSĴŀDꢀ]iNODGQpꢀSRçLDGDYN\ꢀDꢀYåHWN\ꢀSUtVOXåQpꢀXVWDQRYHQLDꢀ6PHUQLFHꢀ
ꢁꢂꢂꢂꢃꢄꢃ(6ꢅ
3DUꢀODꢀSUpVHQWHꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGpFODUHꢀTXHꢀFHWꢀ
DSSDUHLOꢀGHꢀWpOpYLVLRQꢀHVWꢀFRQIRUPHꢀDX[ꢀH[LJHQFHVꢀHVVHQWLHOOHVꢀHWꢀDX[ꢀ
2#'%3.)?,.-&.,',&0.)-3%',030'3.)?3)"2)?,%34',13)@AAABCBHD6
6ORYHQVNR
1HGHUODQGV
*+,",-.)/00&12',13)!--",42',&0.)5676),:>21">2()?2)>3)'2)'3"31,:&%)1).9"2?#)
]ꢀELVWYHQLPLꢀ]DKWHYDPLꢀLQꢀRVWDOLPLꢀUHOHYDQWQLPLꢀGRORĈLOLꢀGLUHNWLYHꢀ
ꢁꢂꢂꢂꢃꢄꢃ(6ꢅ
+LHUELMꢀYHUNODDUWꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGDWꢀGH]Hꢀ
'3"31,.,3),0)&13%330.'3;;,0<),.);3')?3)3..30',M"3)3,.30)30)?3)20?3%3)
UHOHYDQWHꢀEHSDOLQJHQꢀYDQꢀULFKWOLMQꢀꢁꢂꢂꢂꢃꢄꢃ(*ꢅ
(HVWL
(VSDxRO
.lHVROHYDJDꢀNLQQLWDEꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀVHDGPHꢀ7HOHUꢀ
12.'21#.')?,%39',,1,)@AAABCBDE)-F+,0F#3'3"3)>2)0,;3'2'#?)?,%39',,1,.')
'#"30312'3"3)'3,.'3"3)2.>29&+2.'3"3).G'3'3"36
*&%);3?,&)?3)"2)-%3.30'3)*+,",-.)/00&12',13)!--",42',&0.)5676)?34"2%2)
TXHꢀHOꢀWHOHYLVRUꢀFXPSOHꢀFRQꢀORVꢀUHTXLVLWRVꢀHVHQFLDOHVꢀ\ꢀFXDOHVTXLHUDꢀ
RWUDVꢀGLVSRVLFLRQHVꢀDSOLFDEOHVꢀRꢀH[LJLEOHVꢀGHꢀODꢀ'LUHFWLYDꢀꢁꢂꢂꢂꢃꢄꢃ&(ꢅ
/DWYLVNL
,WDOLDQR
$UꢀåRꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGHNODUĎꢆꢀNDꢀ¶7HOHYL]RUV·ꢀDWELOVWꢀ
'LUHNWĦYDVꢀꢁꢂꢂꢂꢃꢄꢃ(.ꢀEşWLVNDMüPꢀSUDVĦEüPꢀXQꢀFLWLHPꢀDUꢀWRꢀVDLVWĦWDMLHPꢀ
0&'3,9#;,3;6
&RQꢀODꢀSUHVHQWHꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGLFKLDUDꢀFKHꢀTXHV=
WRꢀWHOHYLVRUHꢀqꢀFRQIRUPHꢀDLꢀUHTXLVLWLꢀHVVHQ]LDOLꢀHGꢀDOOHꢀDOWUHꢀGLVSRVL]LRQLꢀ
SHUWLQHQWLꢀVWDELOLWHꢀGDOODꢀGLUHWWLYDꢀꢁꢂꢂꢂꢃꢄꢃ&(ꢅ
/LHWXYLŧ
3RUWXJXrV
äLXRꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGHNODUXRMDꢆꢀNDGꢀåLVꢀ¶7HOHYL=
]RULXV·ꢀDWLWLQNDꢀHVPLQLXVꢀUHLNDODYLPXVꢀLUꢀNLWDVꢀꢁꢂꢂꢂꢃꢄꢃ(%ꢀ'LUHNW\YRVꢀ
0#&.'2'2.6
3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀGHFODUDꢀTXHꢀHVWHꢀWHOHYLVRUꢀHVWiꢀ
FRQIRUPHꢀFRPꢀRVꢀUHTXLVLWRVꢀHVVHQFLDLVꢀHꢀRXWUDVꢀGLVSRVLo}HVꢀGDꢀ
K,%34',12)@AAABCBHD6
0DOWL
(ƫƫƧƭƩƪƜ
+DZQKHNNꢆꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢆꢀMLGGLNMDUDꢀOLꢀGDQꢀ¶7HOHYL=
VLRQ·ꢀMLNNRQIRUPDꢀPDOꢇĢWLĜLMLHWꢀHVVHQ]MDOLꢀXꢀPDꢀSURYYHGLPHQWLꢀRĢUDMQꢀ
UHOHYDQWLꢀOLꢀKHPPꢀÀGꢇ'LUUHWWLYDꢀꢁꢂꢂꢂꢃꢄꢃ(&ꢅ
ƍƆꢀƔƈƎꢀƑƂƒƐƕƓƂꢀƈꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀ
ƅƈƌƙƎƆƊꢀƐƔƊꢀ+ꢀƔƈƌƆžƒƂƓƈꢀƓƕƍƍƐƒƖƙƎƆƔƂƊꢀƑƒƐƓꢀƔƊƓꢀ
ƐƕƓƊƙƅƆƊƓꢀƂƑƂƊƔƈƓƆƊƓꢀƋƂƊꢀƔƊƓꢀƌƐƊƑƆƓꢀƓƗƆƔƊƋƆƓꢀƅƊƂƔƂƏƆƊƓꢀ
ƔƈƓꢀƐƅƈƄƊƂƓꢀꢁꢂꢂꢂꢃꢄꢃƆƋꢅ
ÌVOHQVND
+pUꢀPHìꢀOîVLUꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀ\ÀUꢀðYtꢀDìꢀ¶7HOHYL=
VLRQ·ꢀHUꢀtꢀVDPU PLꢀYLìꢀJUXQQNU|IXUꢀRJꢀDìUDUꢀNU|IXUꢆꢀVHPꢀJHUìDUꢀHUXꢀtꢀ
',".9,-#0)@AAABCBDH6
6YHQVND
+lUPHGꢀLQW\JDUꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀDWWꢀGHQQDꢀ79ꢀVWnUꢀ
Lꢀ|YHUHQVVWlPPHOVHꢀPHGꢀGHꢀYlVHQWOLJDꢀHJHQVNDSVNUDYꢀRFKꢀ|YULJDꢀ
UHOHYDQWDꢀEHVWlPPHOVHUꢀVRPꢀIUDPJnUꢀDYꢀGLUHNWLYꢀꢁꢂꢂꢂꢃꢄꢃ(*ꢅ
$ꢀFRS\ꢀRIꢀWKHꢀ'HFODUDWLRQꢀRIꢀ&RQIRUPLW\ꢀLVꢀDYDLODEOHꢀDWꢀꢈ
KWWSꢈꢃꢃZZZꢅSKLOLSVꢅFRPꢃVXSSRUW
1RUVN
3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀHUNO UHUꢀKHUYHGꢀDWꢀXWVW\UHWꢀ79ꢀ
3%),).2;.12%);3?)?3)<%#00"3<<30?3)9%21)&<)N1%,<3)%3"3120'3)9%21),)
?,%39',1)@AAABCBDO6
'DQVN
7KLVꢀHTXLSPHQWꢀPD\ꢀEHꢀRSHUDWHGꢀLQꢀWKHꢀIROORZLQJꢀ(XURSHDQꢀFRXQWULHVꢀ
8QGHUWHJQHGHꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀHUNO UHUꢀKHUYHGꢆꢀ
DWꢀGHWWHꢀ79ꢀꢀRYHUKROGHUꢀGHꢀY VHQWOLJHꢀNUDYꢀRJꢀ¡YULJHꢀUHOHYDQWHꢀNUDYꢀLꢀ
?,%39',1)@AAABCBDO6
I
!" #$ #% &' &( &)
*$ *+ $$ $, -. -/
%# %/ '0 .$ ., ."
1. 1" 10 12 3" 41
45 61 6" /5 ,$ ,+
,1 "/
6XRPL
*+,",-.)/00&12',13)!--",42',&0.)5676)129##''22)'G'30)3''G)'G;2G)'3"31,=
.,&)&0)?,%39',,1,0)@AAABCBDP)&"33"",.'30)122',;#.'30)>2).,'G)9&.931,30)
?,%39',,1,0);#,?30)3+'&>30);#92,0306
3ROVNL
)LUPDꢀ3KLOLSVꢀ,QQRYDWLYHꢀ$SSOLFDWLRQVꢀ1ꢅ9ꢅꢀQLQLHMV]\PꢀRőZLDGF]DꢆꢀůHꢀ
¶7HOHZL]RU·ꢀMHVWꢀ]JRGQ\ꢀ]ꢀ]DVDGQLF]\PLꢀZ\PRJDPLꢀRUD]ꢀSR]RVWDã\PLꢀ
.'&.&Q08;,)-&.'20&Q,30,2;,)K8%39'8Q8)@AAABCBDH6
7KLVꢀHTXLSPHQWꢀFDQꢀEHꢀRSHUDWHGꢀLQꢀRWKHUꢀQRQꢇ(XURSHDQꢀFRXQWULHVꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
K"#&(%&+,#<"'-(&,"#
!"#$%&'%(+
HLHH+LLLL+MNOG++P.'(&),&"Q
0DJ\DURUV]iJ+
HV+LHHIL+ILR++P2#.;/#/0+6Z5[0Q
HLHH+HGO+HHMV++P.'(&,0Q
)$*#'+,-,)$*#'./$+ HLHH+LH+IRH++P.'(&,0+1+.'(&),&Q
:$5$"*(%5+
+
!+KS3B++===>:6,*,:0>%"-10)::"'&
HLHH+MHI+HGHO
+
!+KS3B++===>:6,*,:0>%"-10)::"'&
GGMH+LIII++P*"9(*0(-&(*/Q
)"(0'*+
1RUJH+
+
?("+D()*"++PIIQ+GIGI+HGHO
TONRG+ULR+RR+RV
+
!+KS3B++===>:6,*,:0>%"-10)::"'&
HLHH+ILH+HIV++P9"0&/#*"0Q
ǎȇǸǭǽǵȌ+
gVWHUUHLFK+
ꢀ
ꢁǙDzǾǿDzǺꢀǽǭǴǰǻǯǻǽꢂ
+
!+KS3B++===>:6,*,:0>%"-10)::"'&
ꢃꢄꢄꢀꢅꢆꢇꢈꢉꢃꢆꢀꢀꢁSRãĀF]HQLHꢀORNDOQHꢂ
ćHVNiꢀUHSXEOLND+ LHH+IUGLUH++P7/W:*(&#X+6"5"'Q
3ROVNDꢀ
12'%(,-,+
UHHL+LHH+HHL
'DQPDUN+
ONGN+LMNR++P*"9(*&+":9(*8Q
!+KS3B++===>:6,*,:0>%"-10)::"'&
HLHH+HHH+MNGH++P9"0&/#*"0Q
!+KS3B++===>:6,*,:0>%"-10)::"'&
H+HLHH+OIGG+IGLH
3RUWXJDO+
+
LHH+MLH+RHO++P.'[&,0Q
+
!+KS3B++===>:6,*,:0>%"-10)::"'&
HLHH+LRURIH++P.'(&,0Q
3$/&42*(%5+
5RPüQl+
ǝǻǾǾǵȌ
+
ƆƫƫƜƤơ+
ꢀꢀꢀꢀꢀꢊꢀ0RǾǷǯǭꢀꢁꢆꢇꢉꢂꢀꢇꢋꢈꢊꢈꢈꢈꢈꢀꢊꢀǙDzǾǿǺȈǶꢀǴǯǻǺǻǷ
ꢀꢀꢀꢀꢀꢊꢀꢌꢊꢌꢃꢃꢊꢄꢃꢃꢊꢃꢌꢌꢃꢀꢊꢀǙDzǾǿǺȈǶꢀǴǯǻǺǻǷ
+++++!+Ǥ3B++===>:6,*,:0>%"-10)::"'&
6XLVVHꢀꢁꢀ6FKZHL]ꢀꢁꢀ6YL]]HUD
ꢀ
ƋƫƞƳƧꢀƷƹƱƟƲꢀƷƱƝƹƳƧ
(VSDxD+
+
RHH+LHH+VNN++P.'(&),&"Q
!+KS3B++===>:6,*,:0>%"-10)::"'&
VHHLVHH++P*"%(*Q
(VWRQLD+
6"(%4$+
+
+++++HLHH+HHG+HNH++P9"0&/#*"0+1+.'(&),&+1+.'(&),&"Q
HLHN+HGN+NIH++P.'(&),&Q
ǞǽǮǵȔǭ+
6ORYDNLD+
6ORYHQLMD+
6XRPL+
+
TOLI+IIU+UUH+LUI++PY"9(*#,+:"W,5Q
HLHH+HHUNOM++P7/W:*(&#X+6"5"'Q
HHOLV+I+GLH+RN+HH++PY"9(*#,+9*,%Q
HR+GOIIOUIN++P:(,9(**,0:)6/*)Q
!+KS3B++===>:6,*,:0>%"-10)::"'&
HL+NMRG+RIHH++P*"9(*0(-&(*Q
!+KS3B++===>:6,*,:0>%"-10)::"'&
HI+VUHO+MMV++PY"9(*#,+:"W,5Q
LHH+HLL+MMU++P.'(&),&"Q
+UYDWVND+
7&(*'(+
+
!+KS3B++===>:6,*,:0>%"-10)::"'&
HIVH+II+IVI++P<'//Q
7"$*(%5+
;9$"'#$+
+
1RUWKHUQꢀ,UHODQG+ HLHH+HNN+VLLG
!+KS3B++===>:6,*,:0>%"-10)::"'&
,,,,,,,,VV+G+VNG+LVNG
.DǴDǷFǿDǺ+
8(&9'(+
HHM+MGM+GNH+VV+IM++P*"9(*Q
<2('*(%5,-,
7UNL\Hꢀ
+
NGM+OMVRI++P*"%(*Q
VMGGLLRV++P*"%(*Q
ꢃꢌꢃꢃꢀꢄꢋꢈꢀꢅꢅꢃꢄꢀꢀꢁŔHKLULoLꢀDUDPDꢂ
!+KS3B++===>:6,*,:0>%"-10)::"'&
8'&2/(%'(+
/X[HPERXUJꢀꢁꢀ/X[HPEXUJ
8QLWHGꢀ.LQJGRP+ HLHH+OOI+VHIN++P&"**+<'//Q
+ !+KS3B++===>:6,*,:0>%"-10)::"'&
+
+
HLHH+GV+NNH++P9"0&/#*"0+1+.'(&),&Q
!+KS3B++===>:6,*,:0>%"-10)::"'&
!"#$%"#&'(%&)(*+,-(./0+1+2-(./0+#"#+%"#&'(%&)/**/0+1+3)4/'5/'&'(.*,%6/+7,*8/'
3**+'/.,0&/'/8+(#8+)#'/.,0&/'/8+&'(8/-('90+('/+:'":/'&;+"<+&6/,'+'/0:/%&,5/+"=#/'0>
?:/%,<,%(&,"#0+('/+0)@A/%&+&"+%6(#./+=,&6")&+#"&,%/
B'(8/-('90+('/+&6/+:'":/' &;+"<+C"#,#9*,A9/+D6,*,:0+E*/%&'"#,%0+!>F>+"'+&6/,'+'/0:/%&,5/+"=#/'0
GHII+J+C"#,#9*,A9/+D6,*,:0+E*/%&'"#,%0+!>F>++3**+',.6&0+'/0/'5/8
===>:6,*,:0>%"-
Download from Www.Somanuals.com. All Manuals Search And Download.
|