Register your product and get support at
19PFL3505D
22PFL3505D
EN: For further assistance, call the customer support service in your country.
•
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands, contact Philips
Customer Care Center at 1-866-309-0841
To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 62 00
EN User manual
•
Enter below the model and serial numbers located on the back and right side of theTV cabinet.
FR Manuel d’utilisation
ES Manual del usuario
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de
votre pays.
•
Pour obtenir de l’aide aux États-Unis, au Canada, à Puerto Rico ou aux ÎlesVierges américaines,
communiquez avec le centre de service à la clientèle Philips au : 1-866-309-0841
Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips à
01 800 504 62 00
•
Entrer ci dessous le modèle et le numéro de série situés dérrière à droite sur le dos du téléviseur.
ES: Para obtener más información, llame al servicio de soporte al cliente de su país.
•
Para obtener asistencia en los Estados Unidos, en Canadá, Puerto Rico o en las Islas
Vírgenes de los Estados Unidos, comuníquese con Centro de atención al cliente de Philips al
1-866-309-0841
Solo para Mexico CENTRO DE ATENCIÓN A CLIENTES LADA. 01 800 504 62 00 Solo
Para México.
•
Escriba a continuación el modelo y número de serie que estan localizados en lado derecho y parte
posterior de el gabinete de el televisor.
MODEL NUMBER
SERIAL NUMBER
Download from Www.Somanuals.com. All Manuals Search And Download.
Return your Product Registration Card or register online at
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome
to ensure:
*Proof of Purchase
*Product Safety
Notification
*Additional Benefits
Returning the enclosed card guarantees
By registering your product, you'll receive Registering your product guarantees that
that your date of purchase will be on file, notification - directly from the manufac-
you'll receive all of the privileges to
which you're entitled, including special
money-saving offers.
so no additional paperwork will be
required from you to obtain warranty
service.
turer - in the rare case of a product
recall or safety defect.
Knowsthaesfeetysymbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Congratulations on your purchase,
and welcome to the “family!”
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates unin-
sulated material within your unit may
cause an electrical shock. For the safety of
everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention
to features for which you should read
the enclosed literature closely to prevent
operating and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects
filled with liquids, such as vases, should not
be placed on this apparatus.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS.You’ve selected one of
the best-built, best-backed products available today.We’ll do every-
thing in our power to keep you happy with your purchase for many
years to come.
As a member of the PHILIPS “family,” you’re entitled to protection
by one of the most comprehensive warranties and outstanding
service networks in the industry.What’s more, your purchase guar-
antees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient
home shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing
in a PHILIPS product.
ATTENTION: Pour éviter les choc
électriques, introduire la lame la plus large
de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.
P.S. To get the most from your PHILIPS purchase, be
sure to complete and return your Product Registration
Card at once, or register online at:
For Customer Use
Enter below the model and serial numbers located
on the back and right side of theTV cabinet. Retain
this information for future reference.
Model No.________________________
Serial No. ________________________
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
C. The appliance has been exposed to rain; or
2. Keep these instructions.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
3. Heed all warnings.
4. Follow all instructions.
E. The appliance has been dropped, or the enclosure damaged.
17. Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinets design.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with
the manufacturers instructions.
• Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet which could ultimately
overturn the product.
• Also,do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and third grounding prong. The wide
blade or third prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
18. Wall or Ceiling Mounting - The appliance should be mounted to a
wall or ceiling only as recommended by the manufacturer.
19. Power Lines - An outdoor antenna should be located away from
power lines.
20. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats and
supporting structure grounding of the lead-in wire to an antenna-
discharge unit, size of grounding connectors, location of antenna-
discharge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
21. Objects and Liquid Entry - Care should be taken so that objects do
not fall and liquids are not spilled into the enclosure through openings.
a) Warning: To reduce the risk of fire or electric shock, this apparatus
should not be exposed to rain or moisture and objects filled with
liquids, such as vases should not be placed on this apparatus.
22. Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
• Install all batteries correctly, with + and - alignment as marked on the
unit.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. This product may contain lead or mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
16. Damage Requiring Service - The appliance should be serviced by
qualified service personnel when:
• Do not mix batteries (old and new or carbon and alkaline, etc.)
• Remove batteries when the unit is not used for a long time.
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE (NEC)
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Notice
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved by
Philips Consumer Electronics may void the user’s authority to operate
the equipment.
2009 © Koninklijke Philips Electronics N.V.All rights reserved.
Specifications are subject to change without notice.Trademarks are
the property of Koninklijke Philips Electronics N.V. or their respective
owners. Philips reserves the right to change products at any time
without being obliged to adjust earlier supplies accordingly.
Cables
Connections to this device must be made with shielded cables with
metallic RFI/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
The material in this manual is believed adequate for the intended use of
the system. If the product, or its individual modules or procedures, are
used for purposes other than those specified herein, confirmation of
their validity and suitability must be obtained. Philips warrants that the
material itself does not infringe any United States patents. No further
warranty is expressed or implied.
Canadian notice
StandardTelevision Receiving Apparatus, Canada BETS-7 / NTMR-7.
Philips cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted and published on
the Philips support website as soon as possible.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
Pixel characteristics
This LCD product has a high number of color pixels.Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen.This is a
structural property of the display (within common industry standards)
and is not a malfunction.
ENERGY STAR® is a joint program of the
U.S. Environmental Protection Agency and
the U.S. Department of Energy helping us
all save money and protect the environment
through energy efficient products and
practices.
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Philips
Service Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this manual, any adjustments, or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
Manufactured under license from Dolby Laboratories.“Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
VESA, FDMI and theVESA Mounting Compliant logo are trademarks of
theVideo Electronics Standards Association.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio or television technician
for help.
® Kensington and Micro Saver are registered US trademarks of ACCO
World corporation with issued registrations and pending applications in
other countries throughout the world.
•
Declaration of Conformity
Portions of this software are copyright ©The FreeType Project
(www.freetype.org).
Trade Name:
PHILIPS
Responsible Party: P&F USA, Inc.
Model:
Address:
19PFL3505D, 22PFL3505D
PO Box 430 Daleville, IN 47334-0430 U.S.A.
The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
Telephone Number: 1-866-309-0841
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental care
2 Important
Registering your model with Philips makes you eligible for all of the
valuable benefits listed below, so don’t miss out.
Complete and return your Product Registration Card at once, or
•
•
•
Proof of Purchase
Returning the enclosed card guarantees that your date of purchase
is on file, so no additional paperwork is required from you to
obtain warranty service.
The packaging of this product is intended to be recycled. Contact your
local authorities for information about how to recycle the packaging.
Product Safety Notification
By registering your product you receive notification - directly from
the manufacturer - in the rare case of a product recall or safety
defect.
Additional Benefits of Product Ownership
Registering your product guarantees that you receive all of the
privileges to which you’re entitled, including special money-saving
offers.
End of life directives
For further assistance
For further assistance, call the customer support service in your country.
•
To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S.Virgin
Islands, contact Philips Customer Care Center at 1-866-309-0841
Like all LCD products, this set contains a lamp with mercury; please
dispose of according to all local, state and federal laws.
Philips pays a lot of attention to produce environment-friendly products
in green focal areas.Your newTV contains materials which can be
recycled and reused.At the end of its life, specialized companies can
dismantle the discardedTV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your oldTV according to local regulations.
Product information
ThisTV consumes minimal energy in standby mode to minimize
environmental impact.The active power consumption is given on the
type plate at the back of theTV.The model and serial numbers of your
TV can be found on the back and right side of theTV as well as on the
packaging.
Disposal of used batteries
The batteries supplied do not contain the heavy metals mercury and
cadmium. Nevertheless, in many areas batteries may not be disposed
of with your household waste. Please ensure you dispose of batteries
according to local regulations.
Screen care
•
Avoid stationary images as much as possible. Stationary images
are images that remain on-screen for extended periods of time.
Examples include: on-screen menus, black bars and time displays.
If you must use stationary images, reduce screen contrast and
brightness to avoid screen damage.
Regulatory notices
•
•
Unplug theTV before cleaning.
Clean theTV screen and frame with a soft cloth. Never use
substances such as alcohol, chemicals or household cleaners on the
TV screen.
Warning
To reduce the risk of fire or electric shock, this B apparatus should not be exposed to
rain or moisture. Objects filled with liquids, such as vases, should not be placed on this
apparatus.
•
•
Risk of damage to theTV screen! Never touch, push, rub or strike
the screen with any object.
To avoid deformations and color fading, wipe off water drops as
soon as possible.
Caution
To prevent electric shock, match the wide blade of the plug to the wide slot, fully inserted.
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it.
A falling unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 2.8 inches (7cm) or more around this
apparatus.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
3 YourTV
Congratulations on your purchase, and welcome to Philips!To fully
benefit from the support that Philips offers, register your product at
a
b
c
d
Side controls and indicators
s
*
r
q
p
VOLUME
e
e
d
f
g
MENU
CHANNEL
c
o
n
h
b
.
POWER
a
i
j
a Standby indicator / remote control sensor
b . POWER
Switches theTV on or off.TheTV is not powered off completely
unless it is physically unplugged.
c CHANNEL +/-
k
l
Switches to the next or previous channel.
d MENU
Toggles the main menu on or off.
e VOLUME +/-
m
Increases or decreases volume.
*This button does not function on this unit.
a . (Standby-On)
Switches theTV on or off.TheTV is not powered off completely
unless it is physically unplugged.
b SOURCE
Selects connected devices.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
c FORMAT
Selects a picture format (see ‘Changing picture format’ on page 16).
d SAP
Digital Mode (DTV)
• Press to select the audio language.
Analog Mode (TV)
• Press to select the audio mode.
e FREEZE
Press to pause screen image.
f OK
Activates a selection or accesses the menu.
g
(Navigation buttons)
Navigates through the menus.
h INFO
Displays information about theTV channel or accessory device.
The quality and accuracy of the information depends on the
broadcaster.You might see a difference in broadcast time if the
broadcast is from a different time zone.
i CH +/-
Switches to the next or previous channel.
j MUTE
Mutes or unmutes audio.
k Number buttons
Select a channel, page or setting.
l . (Dot)
Press the dot (.) for digital channels.
m PREV CH
Returns to the previously viewed channel.
n VOL +/-
Increases or decreases volume.
o MENU/EXIT
Turns the menu on or off.
p BACK
Returns to a previous screen.
q AUTO SOUND
Cycles through the preset sound setting
(see ‘Changing auto sound mode’ on page 17).
r AUTO PIC
Cycles through the preset picture setting
(see ‘Changing auto picture mode’ on page 15).
s SLEEP
Sets a delay after which theTV switches to standby.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Tilt stand
(Available for 19PFL3505D only)
4 Get started
You can adjust the stand to change the angle of the unit (-2° to 10°).
Supplied accessories
-2°
10°
•
•
•
•
•
Remote control
2 x AAA, 1.5V batteries
M4 x 12 double sems screw x 4
User manual
Quick Start
Standing mount theTV
Applicable toTVs without mounted stands.
1
Position theTV
Warning
• Do not insert the AC power cord into the power socket outlet before all the
connections are made.
• Large screenTVs are heavy.Two people are required to carry and handle a large
screenTV.
• Before you move theTV, disconnect the cables to prevent breakage.
In addition to reading and understanding the safety instructions,
consider the following before positioning yourTV:
•
Ensure that you always have easy access to the AC power cord or
plug to disconnect theTV from the power.
2
•
If theTV is mounted on a swivel base, ensure that no strain is
placed on the AC power cord when theTV is swiveled. Strain on
the AC power cord can loosen connections.
•
The ideal viewing distance for watchingTV is three times its screen
size.
•
•
Position theTV where light does not fall on the screen.
Connect your devices before you position theTV.
x 4
Using a Kensington lock
There is a Kensington security slot on the back of theTV. Prevent theft
by looping a Kensington lock between the slot and a permanent object,
such as a heavy table.
DIGITAL
COMPONENT
Y
PC-IN
AUDIO
AUDIO OUT
(COAXIAL)
HDMI 1-IN
Pb
Pr
L
L
AUDIO
R
AUDIO
R
Note
• To wall mount theTV, refer to the addendum.
• ThisTV includes M4 x 12 double sems screws.
If you are missing them, please purchase the same screws at your local store.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
If you connect to a DBS (Direct Broadcast Satellite)
Installing the remote control batteries
There are two main DBS systems: DirecTV and DishNetwork.These
systems require a separate, proprietary set-top box to decode signals
and send them to theTV.The set-top box contains a digitalTV tuner for
receiving off-air digital broadcasts.
Contact your local DBS provider for more information about the
connections and theTV channels.
If you connect to a set-top box
A cable box or satellite set-top box can be connected to theTV
through the following connections:
•
•
•
•
•
ANT
1 Slide the battery cover off the back of the remote control.
A/V (CompositeVideo and Audio)
S-Video
YPbPr (ComponentVideo Input)
HDMI
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and -
ends of the batteries line up with the markings inside the case.
3 Slide the cover back into position.
For information about how to connect a set-top box, see the Quick
Start provided.
Note
• Remove the batteries if not using the remote control for an extended period of time.
If you connect a set-top box through RF IN/OUT
If theTV is connected to a cable box or satellite set-top box via a
coaxial connection, set theTV to channel 3 or 4, or to the channel
specified by the service provider.
Connecting the antenna or cable
Cable
If you connect to an antenna
If you connect a set-top box through component video input or HDMI
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digitalTV.This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
TheTV produces stereo sound only if a stereo signal is broadcast.
If you connect to a cable
When yourTV is connected to the cable socket, you might receive free
digital and high definition programs (depending on your cable provider).
The channel number for digital and high definition channels includes a
dot “.”. For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing cables
Plugging in the AC power cord
Route your antenna cable and all other cables through the cable holder
at the back of theTV.The holder helps keep your cables tidy and easily
manageable.
Warning
• Verify that your power voltage corresponds with the voltage printed at the back of the
TV. Do not insert the AC power cord if the voltage is different.
1 Attach the cable holder as illustrated below.
Connect the AC power cord plug to the power outlet. Ensure that the
cord is tightly secured.
ANT. IN
PC IN
RGB
HDMI IN
HDMI
1
DIGITAL
AUDIO OUT
(COAXIAL)
COMPONENT
PC-IN
AUDIO
Y
HDMI 1-IN
Pb
Pr
L
L
AUDIO
R
AUDIO
R
2 Keep the cable through this holder to avoid tangle them.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Í or Æ 5 times to select the side of the pictures that is the most
pleasing to you. then press OK.
Switching on and set up theTV
Before you switch on theTV, check that the AC power cord is properly
.
connected. Press
POWER at the right side of theTV, or press . on
Left side
Right side
the remote control. TheTV normally takes 25-30 seconds to start up
and the following screen appears the first time you turn on theTV.
Initial Setup
i i l
English
Español
Français
Select your menu language.
Seleccione el idioma para el menú.
Sélectionnez la langue du menu.
1/5 Select the picture setting that you prefer.
1/5 Select the picture setting that you prefer.
BACK
MENU
OK
Select
Next
Back
Exit
Press OK to finish [Settings assistant].
Settings assistant
MENU
OK
Select
OK
Skip
i
i
You have set up your viewing preferences.
Follow the on-screen instructions to select your language and complete
yourTV setup. Installation takes approximately 10 minutes.
BACK
Store
Back
MENU Exit
OK
Press Í or Æ to select the desired mode for energy saving, then press
OK.
Finish the Setup.
Initial Setup
i i l
Note
Select “Retail” or “Home” for your location.
• If you are not receiving a signal from your cable service, contact the CATV provider.
• If you press . or MENU during autoprogram, this setting will be canceled.
• The initial autoprogram function can be executed for either [Antenna] or [Cable]
only once.When you change the connection (Antenna / Cable), set autoprogram
again. (Refer to page 22.)
• If there is no signal input from the antenna terminal and no operation for several
seconds after you turn on theTV, [Helpful Hints] appears. Follow the instructions
listed on theTV screen.
Retail
Home
OK
OK
Select
Select [Retail] if you want backlight to be brighter.
Select [Home] to reduce the power consumption.
You must set [Home]. Otherwise, the settings of picture and sound
quality you adjusted will not be memorized after you turn off the unit.
•
Select [Retail], the unit will be set up with predefined setting
for retail displays. In this setting, the power consumption may
possibly exceed the limited requirement of the ENERGY STAR®
qualification.
•
Select [Home], the unit is set to maximize the energy efficiency for
home setting and it can be adjusted through a choice of picture
and sound quality according to your preference.
Press OK to begin [Settings assistant].
Settings assistant
i
i
Settings assistant helps you customize
picture settings. You will see a series of test
pictures where the right side and left side
differ. Select the side that is most pleasing to
you with the Left/ Right keys.
BACK
MENU
OK
Next
Back
Exit
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching channels
5 Use yourTV
This section helps you perform basicTV operations.
Switching yourTV on/off or to standby
CHANNEL
.
POWER
Press CHANNEL +/- on the side of theTV. For digital channels, press
a number (1 to 135) followed by a dot “.” and then the corresponding
sub channel number (1 to 135). e.g. 108.30.
•
•
Press CH +/- or enter a number on the remote control.
Press PREV CH to return to the previously viewed channel.
To switch on
•
•
Press . POWER at the side of theTV.
Press . (Standby-On) on the remote control.
To switch to standby
Press . (Standby-On) on the remote control.
To switch off
Press . POWER at the side of theTV.
•
•
Note
• Energy consumption contributes to air and water pollution.When the AC power
cord is plugged in, yourTV consumes energy.YourTV has a very low standby power
consumption.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting volume
Still mode
You can pause the image shown on theTV screen.
Press FREEZE to pause the image shown on theTV screen.
FREEZE
VOLUME
•
•
The sound output will not be paused.
If no signal is detected or protected signal is received during still
mode, the image remains paused and the sound output will be
muted.
•
The still function will be released after 5 minutes.
To cancel still mode, press any button except . (Standby-On).
Watching channels from a set-top box
To watch channels from a set-top box
1 Switch on the set-top box.
» The picture from your set-top box might appear automatically
on theTV screen.
2 Use the remote control of your set-top box to select channels.
If the picture does not appear
To increase or decrease volume
•
Press VOL +/- on the remote control or press VOLUME +/- on
the side of theTV.
To mute or unmute sound
1 Press SOURCE repeatedly to select the set-top box and wait a
few seconds for the picture to appear.
•
•
Press MUTE on the remote control to mute the sound.
Press MUTE again to restore the sound.
2 Use the remote control of your set-top box to select channels.
Watching connected devices
To watch connected devices
1 Switch on the connected device.
» The picture from your connected device might appear
automatically on theTV screen.
2 Use the remote control of the device to select channels.
If the picture does not appear
1 Press SOURCE repeatedly to select the connected device and wait
a few seconds for the picture to appear.
2 Use the remote control of the device to select channels.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Watching a Blu-ray Disc
Press SAP to display the currently selected audio mode.While
receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
To watch a Blu-ray Disc
1 Insert a Blu-ray Disc into your player.
2 Press ►
channels.
on the remote control of the Blu-ray Disc player to select
11
SAP / STEREO
» The Blu-ray Disc might automatically play on theTV.
If the picture does not appear
When all audio are available
SAP / STEREO
SAP / MONO
SAP / STEREO
When stereo and monaural audio are available
MONO / STEREO MONO / STEREO
When SAP and monaural audio are available
SAP / MONO SAP / MONO
1 Press SOURCE repeatedly to select the Blu-ray Disc player and
wait a few seconds for the picture to appear.
2 Use the remote control of the Blu-ray Disc player to play the disc.
When only monaural audio is available
MONO
(cannot be switched)
Switching audio mode
This section describes how to switch the audio language in the digital
mode and how to switch the audio in the analog mode.
STEREO
SAP
MONO
: Outputs stereo-audio
: Outputs second audio program
: Outputs mono-audio
DTV
1 Press SAP to display the currently selected language and the
number of available languages.
11.1
English 1/3
2 Press SAP repeatedly to cycle through the available audio
languages.
•
Available languages differ depending on the broadcast. [Other]
is displayed when the audio language cannot be acquired, or the
acquired languages are other than English, Spanish or French.
Note
• SAP does not control external audio devices.
• The information display will automatically disappear in a few seconds.
• The default setting for audio mode can be fixed, see [Audio Setting] in ‘Changing
sound settings’ on page 17.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PC settings
6 Use more of yourTV
This function lets you adjust the PC screen position, clock and phase
during PC input.
1 Press MENU on the remote control and select [Features] >
Changing picture and sound settings
[PC Settings].
You must set [Home] in [Location] (refer to page 21).
Otherwise, the settings you adjusted will not be memorized after you
turn off the unit.
2 Adjust the setting.
[Auto Adjustment]
Press or to select [Adjust], then press OK.
•
The horizontal/vertical position, clock and phase of the PC
screen are automatically adjusted.
Changing picture settings
[Horizontal Position], [Vertical Position], [Clock], [Phase]
Press or to adjust.
Summary of picture settings
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
1 Press MENU on the remote control.
2 Press OK to enter the [Picture].
•
•
•
[Auto Picture]: Sets all picture settings to the factory default.
[Brightness]:Adjusts the intensity and details of dark areas.
[Contrast]:Adjusts the intensity of bright areas, keeping dark areas
unchanged.
Settings assistant
Auto Picture
Brightness
Contrast
Picture
Sound
•
•
•
•
[Color]:Adjusts color saturation.
Personal
[Tint]:Adjusts the color balance in an image.
[Sharpness]:Adjusts the level of sharpness in image details.
[ColorTemperature]:To set the color temperature to [Normal],
[Warm] or [Cool].
30
60
36
0
Setup
Features
Language
Color
•
[Horizontal Position], [Vertical Position]:Adjusts the horizontal
and vertical position of the picture for PC screen.
[Clock]: Setting to stabilize the PC screen.
Tint
Sharpness
Color Temperature
0
•
•
Normal
[Phase]: Setting to improve the clarity of the PC screen.
Changing auto picture mode
3 Press or to select one of the picture settings, and press OK to
1 Press AUTO PIC to set yourTV to a predefined picture setting.
enter the setting.
2 Press or to select one of the following settings:
4 Adjust the picture quality.
•
[Personal]:The customized settings you defined by using the
[Picture] menu.
[Auto Picture]
•
•
•
•
[Standard]: For normalTV viewing.
Press or to select the desired setting, then press OK.
([Personal], [Standard], [Sports], [Movie] and [Game])
[Sports]:Vivid picture settings for high action.
[Movie]: Brilliant picture settings for a cinematic experience.
[Game]: Optimized for PCs, games consoles and playstations.
[Brightness], [Contrast], [Color], [Tint], [Sharpness],
[ColorTemperature]
Press or to select the desired setting, then Press or to
adjust.
5 Press MENU to exit.
Note
• To cancel picture adjustment, press MENU.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
For 4:3 video signal
Changing picture format
1 Press FORMAT on the remote control.
[Normal]
[16:9]
[Movie Expand]
[Zoom]
2 Press or to select a picture format and press OK to confirm
your choice.
Summary of picture formats
5 types of display modes can be selected when the broadcasting station
is sending 16:9 or 4:3 video signal.And 3 types of display modes can be
selected for PC input signal.
For 16:9 video signal
[Wide]
Normal
Display a 4:3 picture at its original size. Sidebars appear on both
edges of the screen.
[4:3]
[Normal]
16:9
Display a 4:3 picture at a 16:9 size; the picture is stretched
horizontally to fill the screen.
Movie Expand
Display a 4:3 picture at a 16:9 size; the picture is stretched
horizontally and vertically.This crops out the top of the picture.
[Movie Expand]
Zoom
Display a 4:3 picture at a 16:9 size; the picture is stretched vertically
to fill the screen.This crops out the top and bottom of the picture.
Wide
Display the picture with its center at the original size and the edges
stretched horizontally.
[Wide]
[Zoom]
Normal
For PC input signal
Display a 16:9 picture at its original size.
4:3
Display a 16:9 picture at a 4:3 size; the picture is shortened
horizontally. Sidebars appear on both edges of the screen.
Movie Expand
[Normal]
[Full]
Display a vertically stretched picture.
Zoom
Display a 16:9 picture at its maximum size without changing its
horizontal and vertical ratio.
Wide
[Dot By Dot]
Display a horizontally stretched picture.
Normal
Display a proportionately stretched picture. Sidebars appear on
both edges of the screen.
Full
Display a picture that is stretched out of proportion to fill the
screen.
Dot By Dot
Display a picture in its original size.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
[TV Speakers]
Using yourTV as a PC monitor
This option will allow you to select the audio output from the
unit’s speakers. If you have an amplifier which is compatible with
the CEC function connected to this unit using an HDMI cable,
some sound operations such as volume up can be used with this
unit’s remote control.
Use aVGA connector to connect a PC to yourTV. For sound, add an
audio cable with a stereo mini jack.
Caution
• Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Press or to select the desired option, then press OK.
On
Off
Sound will come from theTV’s speakers.
No sound will come from theTV’s speakers.
Supported screen resolutions
This function allows you to control audio output
from EasyLink compliant device with theTV’s remote
control.
Speakers
EasyLink
The following screen resolutions are supported in PC mode:
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 768
1360 x 768
Refresh rate
60Hz
60Hz
60Hz
60Hz
[Audio Setting]
You can set the output mode as a default for the sound mode
(NTSC only).
This setting is not interlocked when you change the output mode
by pressing SAP. (see ‘Switching audio mode’ on page 14).
60Hz
Press or to select the desired option, then press OK.
Stereo
Mono
SAP
Outputs stereo-audio
Changing sound settings
Outputs mono-audio
1 Press MENU on the remote control and select [Sound].
Outputs second audio program
4 Press MENU to exit.
Picture
Sound
Auto Sound
Standard
Summary of sound settings
Equalizer
The following sound settings can be configured. Depending on the
sound source, some sound settings are not available.
Setup
Auto Volume Leveling
TV Speakers
Audio Setting
Off
Features
Language
Speakers EasyLink
Stereo
•
•
•
[Auto Sound]: Sets all sound settings to the factory default.
[Equalizer]:Adjusts individual sound frequencies.
[AutoVolume Leveling]: Reduces sudden changes in volume, for
example, during commercials or when switching channels. Select
[On] or [Off].
•
[TV Speakers]: Select [On] or [Off], or output sound to an
EasyLink compliant device.When [Speakers EasyLink] is selected,
theTV speakers are disabled andTV sound outputs to the speakers
of the compatible EasyLink compliant device.Adjust the volume
using the unit’s remote control.
2 Press Î or ï to highlight a sound setting and press OK to select
the setting.
3 Adjust the following items.
[Auto Sound]
Changing auto sound mode
Press Î or ï to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music] and [News])
1 Press AUTO SOUND to set yourTV to a predefined sound setting.
2 Press or to select one of the following settings:
[Equalizer]
Adjust tone quality for each frequency.
•
[Personal]:The customized settings you defined by using the
[Sound] menu.
•
•
•
•
[Standard]: For normalTV viewing.
Press Í or Æ to select the specific frequency, then press Î or ï to
adjust the level.
[Movie]: Realistic sound settings for a cinematic experience.
[Music]: Emphasize high and low freq. for instrument sound.
[News]: Clear sound settings for human voice.
[AutoVolume Leveling]
AutoVolume Leveling keeps a constant loudness differential
between theTV commercials and the programs.
Press Î or ï to select the desired option, then press OK.
Select if you want to reduce volume differences
between theTV commercials and the programs.
On
Select if you want to invalidate the AutoVolume
Leveling.
Off
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking a channel
Sleeptimer
This section describes how to lock specified channels.The channels can
be selected but the screen is blanked out and the audio is muted.
Sleeptimer switches theTV to standby after a pre-defined period of time.
You can always switch off yourTV earlier or reset the sleeptimer during
the countdown.
1 Press MENU on the remote control and select [Features] >
[Child Lock] > [Channel Lock].
2 Enter your PIN (see ‘Setting your PIN’ on page 18).
Press SLEEP to set the sleep timer.
Sleep
Off
Sleep timer display appears on theTV screen.
Picture
Video
Component
Sound
Setup
Press SLEEP repeatedly to change the amount of time until shut off.
Sleep
120min.
HDMI 1
Features
HDMI 2
Language
You can set your unit to turn off after a set period of time (from 30 to
120 minutes).
PC
•
•
Each press of SLEEP will increase the time by 30 minutes.
After setup, the sleep timer display can be called up for
checking by pressing SLEEP.
BACK
OK
Back
View / Block
Select
3 Press or and then press OK repeatedly to switch between
Tip
blocked and not blocked.
To Cancel the SleepTimer
• Press SLEEP repeatedly until “Sleep Off” is displayed on theTV screen.
•
•
A box with indicates that the channel is blocked.
An empty box indicates that the channel is not blocked.
4 Press MENU to exit.
Using theTV ratings lock
Child and rating locks
YourTV is equipped with aV-chip that allows you to control access to
individual programs based on their age rating and content rating.The
program content advisory data are sent by the broadcaster or by the
program provider.
You can prevent your children from watching certain programs or
certain channels by locking theTV controls and by using ratings.
If you receive channels through a set-top box or cable box connected
by HDMI, you cannot use theTV ratings lock.Your set-top box or cable
box must be connected through RF or AV connectors.
Setting your PIN
1 Press MENU on the remote control and select [Features] >
1 Press MENU on the remote control and select [Features] >
[Child Lock].
[Child Lock] > [USTV ratings lock].
2 Enter a 4-digit PIN on the Number buttons, of the remote control.
2 Press or or Í or Æ and then press OK repeatedly to switch
•
If you have not set up your PIN, enter 0000.
between blocked and not blocked.
Each rating has a box-graphic in front of it to indicate whether
programs carrying that rating are locked:
Changing your PIN
•
•
•
A box with indicates that all items in the content ratings list
are blocked.
An empty box indicates that no items in the content ratings
list are blocked.
An empty box indicates that some content ratings are
deselected. For example, for ratingTV-14, you can deselect
one or more of the following content ratings: [D] (Dialog),
[L] (Language), [S] (Sex), or [V] (Violence).
1 Press MENU on the remote control and select [Features] >
[Child Lock] > [Change PIN].
2 Enter a 4-digit PIN on the Number buttons of the remote control.
•
•
•
If you have a PIN, enter your current PIN.
If you do not have a PIN, enter 0000.
If you have forgotten your PIN, unplug the AC power cord
for 10 seconds to restore the PIN to 0000.
3 Enter your PIN again to confirm.
4 Press MENU to exit.
Picture
Sound
FV
V
S
L
D
TV-MA
TV-14
TV-PG
TV-G
Setup
Features
Language
TV-Y7
TV-Y
BACK
OK
Back
View / Block
Select
•
When you block a rating, all ratings in the younger age
categories are automatically blocked.
3 Press MENU to exit.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Summary ofTV ratings
Summary of US movie ratings
Age rating
Content rating
Rating
NR
G
Description
TV-Y: Appropriate for children of all ages
with themes and elements suitable for
children aged 2-6.
TV-Y7: Programs designed for children age 7
and older.
None
Not rated.
Movies with a mild content, suitable for all ages.
Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or
maybe some bad language.
PG
[FV] (FantasyViolence)
TV-G: Programs suitable for all ages.These
programs contain little or no violence,
no strong language and little or no
sexual dialog or situations.
TV-PG: Programs contain elements that some [D] (Dialog)
parents may find unsuitable for younger [L] (Language)
children and which may need parental [S] (Sex)
guidance.The program may contain
moderate violence, sexual dialog and/or
situations and some strong language.
TV-14: Programs contain elements that may
not be suitable for children under 14
years of age.These programs include
None
PG-13
R
Movies for which parental guidance may be
recommended if under age 13.
Restricted.The movies usually contain offensive sex
or bad language and may be unsuitable for children
under the age of 17. Parental guidance or permission
needed.
Even with parental permission, forbidden under age
17. More offensive sex, violence or bad language.
Movies which generally focus on sex, violence and/or
bad language.Also known as pornography.
NC-17
X
[V] (Violence)
[D] (Dialog)
[L] (Language)
[S] (Sex)
Summary of Canadian English rating
Rating
one or more of the following: intense [V] (Violence)
violence, intense sexual situations,
Description
E
Exempt program.
suggestive dialog and strong language.
C
Programming suitable for children under the age of
8 years. No profanity or sexual content of any level
allowed. Minimal comedic violence.
Suitable for children ages 8 and over. Low intensity
violence and fantasy horror allowed.
Movies with a mild content, suitable for all ages.
Movies for which parental guidance is recommended.
They may contain a few racy or violent scenes or
maybe some bad language.
TV-MA: Programs are designed to be viewed
by adults and may be unsuitable for
children under the age of 17.These
programs may contain graphical
[L] (Language)
[S] (Sex)
[V] (Violence)
C8+
violence, explicit sexual activity and/or
crude or indecent language.
G
PG
Using the movie ratings lock
14+
18+
Programming intended for children ages 14 and
over. May contain intense scenes of violence, strong
profanity, and depictions of sexual activity within the
context of a story.
Programming intended for viewers ages 18 and over.
May contain strong violence, language, and sexual
activity.
You can control viewing of movies based on their MPAA (Motion
Picture Association of America) rating.
1 Press MENU on the remote control and select [Features] >
[Child Lock].
2 Select one of the menus for movie ratings lock.
•
•
In the USA, select [US Movie ratings lock].
In Canada, select [Canadian English Rating] or
[Canadian French Rating].
3 Enter your PIN (see ‘Setting your PIN’ on page 18).
» The following screen shows the ratings in
[US Movie ratings lock].
Summary of Canadian French rating
Rating
Description
E
Exempt program.
G
Appropriate for all ages with little or no violence and
little to no sexual content.
8ans+
Appropriate for children 8 and up which may
contain little violence, some foul language and/or
little to no sexual content.
Appropriate for children 13 and up, with moderate
violence, language, and some sexual situations.
Persons under 13 should be accompanied by an
adult.
Picture
Sound
Setup
X
NC-17
R
13ans+
Features
PG-13
Language
PG
G
16ans+
18ans+
Appropriate for children 16 and up, with strong
violence, strong language, and strong sexual content.
Only to be viewed by adults and contains extreme
violence and graphic sexual content/pornography.
NR
BACK
OK
Back
View / Block
Select
4 Press Î or ï and then press OK repeatedly to switch between
blocked and not blocked.
•
•
A box with indicates that all items in the rating are blocked.
An empty box indicates that no items in the rating are not
blocked.
5 Press MENU to exit.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Closed caption
Selecting caption services
1 Select a caption service for analog channels:
Closed captioning is an assistive technology that allows persons with
hearing disabilities to access television programming. Closed captioning
displays the audio portion of programming as text superimposed over
the video.
•
Press MENU on the remote control and select
[Features] > [Closed Caption] > [Caption Service].
Press or to select one of the listed caption services, and
press OK to confirm your choice.
•
Note
2 Press MENU to exit.
• Closed caption will not be displayed when you are using an HDMI connection.
• The captions do not always use correct spelling and grammar.
Not allTV programs and product commercials include closed caption information.
Refer to your areaTV program listings for theTV channels and times of closed caption
shows.The captioned programs are usually noted in theTV listings with service marks
such as [CC].
Note
• Not all caption services are used by aTV channel during the transmission of a closed
caption program.
DTV
Summary of caption services
Selecting DTV caption services
1 Select a caption service for digital channels:
Service
Description
CC-1 and T- 1 ; are the primary caption and text services.
The captioning or text is displayed in the same
language as the program’s dialogue
•
Press MENU on the remote control and select
[Features] > [Closed Caption] >
(up to 4 lines of script on theTV screen, where it
does not obstruct relevant parts of the picture).
CC-3 and T- 3 ; serve as the preferred data channels.
The captioning or text is often a secondary language.
CC-2, CC-4, T- 2 are rarely available and broadcasters use them only
[Digital Caption Service].
Press or to select one of the listed caption services, and
press OK to confirm your choice.
•
Select if you do not want Digital Caption Service.
This is the default.
Off
and T- 4 ;
in special conditions, such as when [CC-1] and
[CC-3] or [T-1] and [T-3] are not available.
•There are 3 display modes according to programs:
Paint-on mode:
Select one of these before changing any other item
CS-1 to CS-6
in [Closed Caption] menu. Choose [CS-1] under
normal circumstances.
Displays input characters on theTV screen
immediately.
Pop-on mode:
Once characters are stored in memory, they are
displayed all at once.
Roll-up mode:
2 Press MENU to exit.
Selecting how captions are displayed
You can choose the size, font, color, background and other
characteristics of the caption text.
Displays the characters continuously by scrolling
(max. 4 lines).
1 Press MENU on the remote control and select [Features] >
[Closed Caption] > [Caption Style] > [User Setting].
Press or to select [On], then press OK.
2 Press or to highlight an option for digital captions, and press
OK to select the option.
3 Press or to highlight a setting for the option, and press OK to
confirm your choice.
4 Press MENU to exit.
Difficulties viewing closed captions on DTV programming
If you have difficulties viewing closed captions on DTV programming, including
HDTV, received from your subscription television provider, you should:
•
consult any consumer information and manuals/guides on closed
captions for DTV programming provided by your subscription
television provider;
•
•
ensure that the captioning function on your set-top box, if
applicable, is turned on; and,
ensure that the captioning function on your DTV is turned on.
If you are still unable to view closed captions on DTV programming, you
should contact your subscription television provider for assistance.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EasyLink
Energy saving mode
EasyLink is known for CEC (Consumer Electronics Control) and this
allows you to operate the linked functions between our brand devices
with CEC feature and thisTV connecting through an HDMI cable.We
do not guarantee 100% interoperability with other brands of CEC
compliant devices.
You can set whether the power consumption is saved or not.
1 Press MENU on the remote control and select [Features] >
[Energy Saving Mode].
1 Press MENU on the remote control and select [Features] >
[EasyLink].
Picture
Sound
Closed Caption
Child Lock
Setup
PC Settings
Features
Language
EasyLink
Picture
Sound
Master EasyLink
Auto Device Off
Auto TV On
On
On
On
Energy Saving Mode
Location
Off
Home
Setup
Current Software Info
Device List
Features
Language
2 Press or to select the desired mode, then press OK.
On
Select if you want to reduce the power consumption.
The power consumption may possibly exceed
the limited requirement of the ENERGY STAR®
qualification.
2 Press Î or ï to highlight the desired setting and press OK to
Off
select the setting.
3 Adjust the following items.
3 Press MENU to exit.
[Master EasyLink]
Set the EasyLink [On] or [Off].
The following additional settings will be in gray when you set to [Off].
Set your location to home
Press or to select the desired option, then press OK.
You can set the location of yourTV to [Home] or [Retail].
Choosing [Home] gives you full flexibility to change predefined settings for
picture and sound.
Select if you have connected an external device that
is compatible with the CEC function.
On
Off
Disable all EasyLink.
1 Press MENU on the remote control and select [Features] >
[Location].
[Auto Device Off]
You can set your device to turn off by interlocking from this unit’s
power.
2 Select [Home] and press OK to confirm your choice.
3 Press MENU to exit.
Press or to select the desired option, then press OK.
Note
Your device turns off automatically when you turn off
the unit.
On
• You must set [Home]. Otherwise, the settings of picture and sound quality you
adjusted will not be memorized after you turn off the unit.
Off
Your device stays on even if you turn off the unit.
[AutoTV On]
The unit will turn on detected by the power on signal sending from
your device.
Press or to select the desired option, then press OK.
The unit turns on automatically when you turn on
your device.
On
Off
The unit stays off even if you turn on your device.
[Device List]
This function lets you see the product name of connected devices.
Press or to select the desired HDMI device listed on theTV
screen, then press OK.
4 Press MENU to exit.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Autoprogram
7 Install channels
Before you install channels, ensure that you are registered with your
cableTV provider and that your equipment is correctly connected.
The first time you set up yourTV, you are prompted to select a menu
language and to installTV and digital radio channels (if available).This
chapter provides instructions on how to reinstall and fine-tune channels.
1 Press MENU on the remote control and select [Setup] >
[Autoprogram].
Selecting your menu language
Autoprogram
Channel List
Add Channels
Antenna
Picture
Sound
1 Press MENU on the remote control and select [Language].
Setup
Features
Language
Picture
Select your menu language.
Sound
English
Español
Français
Setup
Seleccione el idioma para el menú.
Sélectionnez la langue du menu.
Features
Language
2 Press OK to start the installation.
If you run [Autoprogram] when you have locked channels, a
message appears asking to enter your PIN . Enter your PIN in
order to complete the installation.
If you have forgotten your PIN, reset it as described in ‘Changing
your PIN’ on page 18.
2 Select a language and press OK to confirm your choice.
3 Select [Antenna] or [Cable] and press OK.
3 Press MENU to exit.
•
When [Antenna] is selected, theTV detects antenna signals. It
searches for NTSC and ATSC channels available in your area.
When [Cable] is selected, theTV detects signals supplied by
cable. It searches for NTSC,ATSC, and QAM modulated
channels available in your area.
•
Picture
Sound
Back
Autoprogram will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Antenna
Cable
Setup
Features
Language
Select your signal source.
Antenna
Or
Cable
ANT.IN
*The illustration is described for 22PFL3505D.
•
When autoprogramming is complete, the lowest memorized
channel will be displayed.
4 Follow the on-screen instructions to complete the installation.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel list
Add channels
This function lets you add the channels that were not added by the
autoprogram due to the receptible condition at the initial setup.
The channels selected here can be skipped when selecting the channels
using CH +/-.
1 Press MENU on the remote control and [Setup] >
Those channels can still be selected with the Number buttons.
[Add Channels].
1 Press MENU on the remote control and select [Setup] >
[Channel List].
Picture
Sound
Autoprogram
Channel List
Add Channels
Antenna
Picture
Sound
Autoprogram
Channel List
Add Channels
Antenna
Setup
Features
Language
Setup
Features
Language
2
Press a number (1 to 135) to enter the number of the channel you
want to add, then press OK.
2
Press or to select the channel you want to remove, then press OK.
11
Picture
Sound
DTV
DTV
DTV
40.1
40.2
40.3
Picture
Sound
Add channels
Setup
Highlight channels for Ch Up/Down key
selection.
For analog channels,
Features
Language
select a channel to be
added using number keys.
Setup
Features
Language
For digital channels,
you must perform
Autoprogram function.
BACK
OK
Back
Ch Select
Watch/Skip
BACK
Back
Ch Change
•
•
•
The channel display for the removed channel darkens.You will
not be able to select the channel again using CH +/-.
To reactivate a removed channel, press or and press OK.
The registered channels are highlighted.
When you remove a major channel, its minor channels are
removed as well.
3 Press MENU to exit.
Note
•
•
If setup completes successfully, [Added to the channel list] is displayed.
If external input is used, it is not possible to register the channel and [Unavailable] will be
displayed on theTV screen.
Note
•
By pressing or , you can select the memorized channels only.
•
The channel with the [DTV] indicated on the display is ATSC. Otherwise the channel is NTSC.
3 Press MENU to exit.
Optimizing the signal quality from your
antenna
You can optimize your signal quality by tuning in ATSC channels with
weak signals, and adjusting the antenna.
1 Press MENU on the remote control and select [Setup] >
[Antenna].
2 Press OK to confirm your choice.
3 Press a number (1 to 135) or press CH+ or CH- to select the
channel for which you want to check the digital signal strength.
4 Press MENU to exit.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading software
8 Upgrade yourTV software
1 Prepare the software upgrade (see ‘Preparing for the software
upgrade’ on page 24).
Philips continuously tries to improve its products and we strongly
recommend that you upgrade theTV software when upgrades are
available.
2 If theTV is on, press . POWER at the side of theTV to switch off
theTV.
3 Connect your USB device to the service terminal on the side of
New software can be downloaded from our website at
(e.g. 22PFL3505D) to find information.
yourTV.
Checking your current software version
1 Press MENU on the remote control and select [Features] >
[Current Software Info].
» The version and a description of the current software is
displayed, then press OK.
Back
Picture
Sound
Release Version:
ZPBF1HA_001_0
Setup
Features
Language
4 Switch on theTV.
» TheTV scans the USB device for the upgraded software and
automatically enters upgrade mode.
5 Read the on-screen instructions and confirm that you want to
continue with the installation.
2 Press MENU to exit.
Software Upgrade
Preparing for the software upgrade
Software upgrade in progress. Please wait.
Do not remove the USB storage device or turn the TV off
while upgrade is in progress.
You require the following equipment:
•
•
A PC with web browsing capability.
An archive utility that supports the ZIP-format
(e.g.WinZip for Windows or StuffIt for Mac OS).
A USB memory stick.
Downloading...
60%
•
Note
• Only FAT/DOS-formatted portable memory is supported.
6 When the software upgrade is complete, remove the USB device.
• New software can be obtained from your dealer or can be downloaded from the
www.philips.com/welcome website.
• Use only software upgrades that can be found on the Philips web site.
7 Press . POWER at the side of theTV to switch off theTV.
8 Switch on theTV.
» TheTV starts up with the new software.
Warning
•
The following messages are displayed without starting software
• When the software upgrade is running, don’t press any buttons.
• Do not remove the USB device during the software upgrade.
upgrade when it doesn’t fulfill the upgrade conditions.
• If there is a power drop during the upgrade, do not remove the USB device from the
TV.TheTV continues the upgrade as soon as the power comes back.
• If an error occurs during the upgrade, retry the procedure or contact your dealer.
Software Upgrade
Downloading the software
1 On your PC, open a web browser and go to
The version of this update file is the same or older
than the current version.
Please check the file and try again.
2 Find information and software related to yourTV and download
the latest software upgrade file to your PC.
3 Decompress the ZIP-file.
4 Copy the upgrade file to the root directory of the USB device.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Connect devices
This section describes how to connect various devices with different
connectors and supplements examples provided in the Quick Start.
Connection overview
*
a
SERVICE
TERMINAL
ANT. IN
b
h
c
d
ANT. IN
HDMI 2
PC IN
RGB
HDMI IN
HDMI 1
PC IN
RGB
HDMI IN
HDMI
1
COMPONENT
DIGITAL
AUDIO OUT
(COAXIAL)
PC-IN
AUDIO
e
f
Y
HDMI 1-IN
VIDEO
Pb
Pr
L
L
AUDIO
R
AUDIO
R
i
j
DIGITAL
AUDIO OUT
(COAXIAL)
COMPONENT
PC-IN
AUDIO
Y
HDMI 1-IN
Pb
Pr
L
L
HEAD PHONE
AUDIO
R
AUDIO
R
g
k
a antenna input jack
i S-Video input jack (side)
Signal input from an antenna, cable or satellite.
S-Video (side) input connector to be used with Audio L/R
connectors for camcorder, game console, etc.When you use the
S-Video (side) for video signals, do not use Composite video (side)
for video signals.
b HDMI 1 input jack
Digital audio and video input from high definition digital devices
such as Blu-ray players.
j composite video input jack (side)
c PC input jack
Video input for analog devices such as DVD, camcorder, game
console, etc.To be used with audio input.
VGA cable connection for PC.
d audio input jack for PC connection
k headphone jack
Mini-plug audio cable connection for PC.
Headphone connection for personal listening.
e digital audio output jack
* service terminal
Digital audio output to home theaters and other digital audio
Use this terminal only when a software upgrade is necessary.
USB memory only. Do not connect any device to this terminal
such as; digital camera, keyboard, mouse, etc. For more information,
please visit at www.philips.com/welcome
systems.
f component video and audio input jack
Video input from analog devices such as DVD, receiver, game
console, etc.This connector is used with audio input.
Caution
g audio input jack for HDMI 1
• Disconnect the AC power cord before connecting devices.
h HDMI 2 input jack
Second HDMI in connector.
Note
• Different types of connectors may be used to connect a device to yourTV, depending
on availability and your needs.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video - Good quality
Selecting your connection quality
HDMI - Highest quality
S-Video cable and audio L/R cable (red/white)
For analog connections. Use an S-Video cable together with an audio
L/R cable.
Supports high-definition signals and gives highest picture and sound
quality.Video and audio signals are combined in one cable.You must use
HDMI for full high-definition video and to enable Philips EasyLink.
Composite - Basic quality
Note
• Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is
a form of Digital Rights Management that protects high definition content in DVD or
Blu-ray Discs.
Component (Y Pb Pr) - High quality
Composite video/audio cable (yellow/red/white)
For analog connections. Composite cables usually combine a yellow
video cable with a red/white audio L/R cable. Match the cable colors
when you connect to theTV.
Component video cable (red/green/blue) and audio L/R cable (red/
white)
Supports high-definition signals but gives lower picture quality than
HDMI. Component cables combine a red/green/blue video cable with
a red/white audio L/R cable. Match the cable colors when you connect
to theTV.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a set-top box, DVD player/recorder via
component video output connectors (YPbPr) and analog
audio
Connecting your devices
This section describes how to connect a selection of devices with
different connectors. Different types of connectors can be used to
connect a device to yourTV.The following sections describe examples
only, other configurations are possible.
Connecting a set-top box, Blu-ray Disc player and
HD game console via HDMI
OUT
YPbPr
Set-top box
or
OUT
HDMI
IN
AUDIO L/R
IN
DVD / Set-top box
IN
OUT
Blu-ray Disc player
IN
Note
HD game console
OUT
• When you connect cables, match the cable colors to the connectors on theTV.
HDMI
Connecting a set-top box, DVD player/recorder via
composite connectors
Connecting a DVD player via HDMI-DVI and analog audio
RF IN
IN
RECORDER
OUT
HDMI 1 IIN onlly
DVD player
IN
DVI OUT
AUDIO L/R
+ VIDEO
OUT
IN
OUT
CABLE
AUDIO L/R
Set-top box
RF OUT
RF IN
Do not place your recorder too close to the screen because some
recorders can be susceptible to signals.
If your recorder has an S-VHS video jack for improved picture quality,
connect an S-Video cable with the S-Video input. Connect the audio
cables to the audio L and R input jacks.
Note
• When you use an S-Video connector, do not connect any device to the Composite
video jack.
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on theTV.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a set-top box via a composite connector
Connecting a digital home theater amplifier
RF IN
OUT
DIGITAL AUDIO
IN
AUDIO L/R + VIDEO
IN
CABLE
OUT
RF IN
digital home theater
amplifier
RF OUT
Set-top box
For legal reasons, the digital audio signal can be muted for
copy-protected PCM audio qualities on accessory devices connected
through HDMI.
If your device has an S-VHS video jack, improve the picture quality as
follows:
•
•
Connect an S-Video cable to the S-Video input ofVIDEO.
Connect the audio cables to the audio L and R input jacks of
VIDEO.
Connecting a PC
If you connect a PC with aVGA connector at the back.
Note
• When you use an S-Video connector, do not connect any device to the Composite
video jack.
• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
• When you connect cables, match the cable colors to the connectors on theTV.
IN
VGA
OUT
IN
STEREO
MINI-PLUG AUDIO
OUT
PC
If you connect a PC with an S-Video connector at the side.
S-VIDEO
IN
OUT
AUDIO
IN
AUDIO
IONUT
PC
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
No sound
on theTV
loudspeaker.
Volume level is set to zero - increase the volume.
Sound is muted - press MUTE on the remote
control.
10 Troubleshooting
Audio cable is not connected - for AV connection,
ensure that the Audio L/R cable is connected
as described in Connecting your devices (see
‘Connecting your devices’ on page 27). If you use a
component cable, ensure that you have not crossed
the red audio cable with the red video cable.
Audio output setting for the accessory device is
incorrect. For HDMI connections, some accessory
devices have an HDMI audio output setting that
must be turned on for HDMI to HDMI connections.
Check if [Sound] > [TV Speakers] > [Off] is set to
[On]. No sound will be output when
Problem
Possible cause and solution
No power or
indicator light.
TheTV is not connected to the power.
.
Press
POWER at the side of theTV or on the
remote control.
Ensure that the AC power cord is connected tightly
to theTV power connector and to the power socket
outlet.
Remove the AC power cord from the power socket
outlet, wait 60 seconds and reconnect the AC power
cord.
Connect theTV to a different power socket outlet.
[TV Speakers] is set to [Off].
Error message HDCP authentication fail.
Ensure that your HDMI cable is certified.
on the screen
with HDMI
connection.
Bad picture
quality with
a coaxial
Standard definition channels are not as clear as
high definition channels - connect the devices via
component or HDMI cables.
Press SOURCE on the remote control to switch to
another source and then switch back to the HDMI
source.
Reset the accessory device and theTV.
Turn on theTV.
Select the HDMI channel.
Turn on the accessory device.
While theTV and the accessory device are powered
on, unplug either end of the HDMI cable and then
reinsert the cable.
connection.
Cannot control Confirm that the connected devices are EasyLink
yourTV and
connected
devices with one
remote control.
compliant and are connected to yourTV via an
HDMI cable. Not all brands of devices such as
Blu-ray Disc players use the same system as Philips
EasyLink. Other brands might not work with Philips
EasyLink.
No sound is
detected from
the PC.
An audio cable is not connected.
Connect an audio cable to the PC IN AUDIO port
on theTV.
Press SOURCE on the remote control, and select
the PC source.
Downloading an electronic copy
To obtain an electronic copy of this manual:
TV does not
respond to the
remote control.
Batteries are installed incorrectly, or low battery
power.
Ensure the indicator light on theTV blinks when you
press the remote control buttons.
Ensure that you are using theTV remote control.
Ensure that the batteries are inserted correctly and
do not need to be replaced.
Remove the AC power cord from the power socket
outlet, wait 60 seconds and reconnect the AC power
cord.
2 Choose your country of location.
3 Enter the model number or a keyword in the “Find your product”
field.Alternatively, you can browse the catalogue.
4 Click the description or model.
5 Under Product support, click “User manuals”.
The picture
is distorted,
stretched out, or
has black bars
on the side or
top.
The picture is
mostly red and
green, or the
picture misses
red when
Broadcast video format.
Press FORMAT on the remote control to select the
best picture format.
For some accessory devices, the picture format must
be set in the accessory device.
Contact us
If you cannot resolve your problem, refer to the FAQ for thisTV at
If the problem remains unresolved, contact the Customer Support
Center in your country.
Insecure/incorrect connection.
Ensure all the connections are made according to
the color code.
Push the component cables all the way into the
YPbPr sockets on theTV.
Warning
connected to an
accessory device
via component
cables.
• Do not attempt to repair theTV yourself.This may cause severe injury, irreparable
damage to yourTV or void your warranty.
Note
No picture or
sound.
No picture or sound - ensure you have selected the
correct channel.
Incomplete channel installation.
• Please have available yourTV model and serial number before contacting us.These
numbers are available on the back and side of yourTV, as well as on the packaging.
If theTV receives channels via an AV connection, set
theTV to the correct source input.
If theTV is connected directly to the wall via a
coaxial connection, perform the auto-installation
again.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Product information
Note
• Product information is subject to change without prior notice.
Picture enhancement
Type:
Brightness:
WXGA (1366 x 768 pixels @60Hz)
19PFL3505D: 250 cd/m2
22PFL3505D: 280 cd/m2
16:9
Aspect Ratio:
Viewing Angles:
19PFL3505D:160° (V) by 170° (H)
22PFL3505D:160° (V) by 170° (H)
ATSC/QAM
Built-in digital tuner:
Sound enhancement
Mono/Stereo:
Power output
(RMS Watts):
Equalizer:
Mono, Stereo
6 W
5 band
Ease of use
Video modes:
For 16:9 video signal/Normal, 4:3, Movie
Expand Zoom, Wide
,
For 4:3 video signal/Normal, 16:9
,
Movie
Expand, Zoom, Wide
For PC input signal/Normal
,
Full, Dot By Dot
PC input:
viaVGA
Connections
Component video
input with audio L/R:
Composite video input 1
with audio L/R and
S-Video:
1, supporting video signals
@60Hz
:
480i/p, 720p, 1080i
HDMI:
2
HDMI supporting video signals: 480i/p, 720p,
1080i @60Hz
Audio L/R integrated
with HDMI1:
1
Digital audio output:
Headphone:
1, supporting Dolby Digital
1
1, /8 inches (3.5mm)
Power
Power requirements:
120V~ AC +/- 10%, 60Hz +/- 0.5%
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Warranty
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
or a part that has been modified without written company per-
mission, or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold “AS
IS” by some retailers.
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory, or (3)
refund the original purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-309-0841
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to new company manufac-
tured products that can be identified by the trademark, trade
name, or logo affixed to it. This Limited Warranty does not apply THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
to any hardware product or any software, even if packaged or
sold with the product, as manufacturers, suppliers, or publishers
may provide a separate warranty for their own products pack-
aged with the bundled product.
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
The company is not liable for any damage to or loss of any pro-
grams, data, or other information stored on any media contained
within the product, or other additional product or part not cov-
ered by this warranty. Recovery or reinstallation of programs,
data or other information is not covered under this Limited
Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 430 Daleville, IN 47334-0430
061708
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
P
13 Index
PC
15
16, 17
15
Picture format
Picture settings
Product information
A
30
Antenna, connect
Audio
9
17
17
21
15
17
21
17
R
Audio Setting
Auto device off
Auto picture mode
Auto sound mode
AutoTV on
Ratings
18, 19
Remote control
insert batteries
overview
9
6, 7
11, 21
Retail store mode
Auto volume leveling
S
C
Settings assistant
Side controls
Signal quality
Sleeptimer
Software
11
6
23
18
Cables
component
composite
connection quality
HDMI
Manage cables
S-Video
YPbPr
Channels
install
26
26
26
26
10
26
26
upgrade
version
24
24
17
17
6, 12
8
Sound settings
Speakers EasyLink
Standby
Stand mount theTV
Subtitles
22
23
18
list
lock
20
Child lock
Channel lock
PIN
ratings lock
Closed caption
Connection
Customer support service
18
18
18, 19
20
9, 25, 27
5
T
Tilt stand
Troubleshooting
TV
8
29
as PC monitor
connections
controls
menu
position
remote control
screen care
software
switch channels
switch on
TV Speakers
16, 17, 29
9, 25, 27
6, 7
15
D
8
Device List
21
6, 7, 9
5
24
12
11, 12
17
E
EasyLink
21
21
5
Energy saving mode
Environmental care
Equalizer
17
V
H
Volume
adjust
AutoVolume Leveling
mute
Home mode
11, 21
11
13
17
13
I
Initial setup
W
Warranty
31
26
L
Location (Retail or Home mode)
11, 21
21
Y
YPbPr
M
Master EasyLink
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura,
Huixquilucan Edo. de México
C.P. 52787
TELEVISOR A COLOR DE CRISTAL LIQUIDO (LCD)
MODELO
LCD
IMAGENVISIBLE
ENERGIA
19PFL3505D/F7
22PFL3505D/F7
19”(48,26cm)
22”(55,88cm)
47,00cm
54,86cm
120V ~ 60Hz 50W
120V ~ 60Hz 65W
:
Comercializado por
P&F MEXICANA, S.A. DE C.V.
:
IMPORTADOR
SOJITZ MEXICANA, S.A. DE C.V.
Av. Paseo de las Palmas No. 239-302
Col. Lomas de Chapultepec, C.P. 11000
México, D.F. Tel. 52 (55) 5202 - 7222
:
EXPORTADOR
FUNAI ELECTRIC CO. L.T.D.
CHINA
PAIS DE ORIGEN :
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
Printed in China
A0172UH/A01N2UH
1EMN25619 ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|