TABLE OF CONTENTS
GETTING STARTED
TIMER RECORDING
Accessories...................................................................... 1
Important safety instructions ......................................... 2
Warnings, cautions and others ...................................... 3
Disc information .............................................................. 4
Setting the timer ........................................................... 26
Timer Record using the G-Code system ................... 27
®
FLEX TIME
Pausing Live TV Broadcast .......................................... 29
Record and Play ........................................................... 29
CONTROLS AND DISPLAYS
Remote control ............................................................... 5
Front panel connections ................................................ 6
Display window .............................................................. 6
Rear panel connections ................................................. 7
PLAYBACK
Basic playback............................................................. 30
POWER, OPEN/CLOSE, PLAY, F.F., REW. ......... 30
NEXT, PREVIOUS .................................................. 30
PAUSE/STEP, STOP, DISPLAY ............................. 30
DISC MENU, PLAYLIST.......................................... 30
CONNECTIONS
Connecting the antenna cable and television ............. 8
For better video quality.................................................. 9
S-Video out .............................................................. 9
Component out ......................................................... 9
For better audio quality ............................................... 10
Connection to a stereo audio amplifier or receiver ... 10
Connection to a digital audio device........................ 10
Digital out optical .................................................... 10
Digital out coaxial ................................................... 10
Connecting satellite receiver or cable box ............... 11
Navigation operation................................................... 31
REPEAT, ZOOM ..................................................... 31
SLOW, SEARCH .................................................... 31
A-B REPEAT,SUBTITLE ......................................... 31
AUDIO,ANGLE ...................................................... 31
INFORMATION ....................................................... 31
Playback video titles ................................................... 32
Playback music files.................................................... 33
Playback picture files.................................................. 33
Audio CD playback ...................................................... 34
Playback pictures with music..................................... 34
SYSTEM MENU
COPY
System menu ................................................................ 12
Copy from DVD to HDD ................................................ 35
Copy from HDD to DVD ................................................ 35
TV CHANNEL SETUP
EDIT
TV channel search ........................................................ 13
Fine-tuning TV channels manually ............................. 13
Editing TV channels manually..................................... 13
Channel Editor .............................................................. 14
Browser menu .............................................................. 36
Naming a title .............................................................. 36
Protecting a title .......................................................... 36
Overwriting a title........................................................ 36
Splitting a title ............................................................. 37
Merging titles ............................................................... 37
Erasing a title............................................................... 37
Setting a title thumbnail ............................................. 37
Chapter marks relevant setting .................................. 37
®
SETTING UP G-Code SYSTEM
®
Setting up G-Code System ........................................ 15
GUIDE
Playback ........................................................................ 16
Record ........................................................................... 17
Timer record ................................................................. 18
Copy ............................................................................... 20
DISK TOOLS
Erase .............................................................................. 40
Finalize.......................................................................... 40
Cleanup Disk ................................................................. 41
Defragment.................................................................... 41
RECORDING
Before recording........................................................... 21
Recording television programs ................................... 21
Adding new recordings ................................................ 22
Changing chapter intervals.......................................... 22
Playing back the last recorded session ...................... 22
Recording from a VCR or Camcorder ......................... 23
One touch record .......................................................... 24
DV recording ................................................................. 24
DV control ...................................................................... 26
GUI OPERATION
GLOSSARY
SPECIFICATIONS
Accessories
Please check and identify the supplied accessories.
1xRemote control
2x Batteries
1x A/V cable
1x AC Power Cord
£
£
£
£
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS, CAUTIONS AND OTHERS
THE FOLLOWING APPLIES ONLY FOR U.S.A.
CAUTION!
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
CAUTION!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER OF THIS UNIT.
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to humans.
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician
for help.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the appliance.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN THE COVER AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT FOR LASER PRODUCTS
1)CLASS 1 LASER PRODUCT
2)DANGER: Visible and invisible laser radiation when open
and interlock failed or defeated. Avoid direct exposure to
beam.
3)CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO
MOISTURE AND ENSURE THAT OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED AWAY FROM
THE APPARATUS.
CAUTION!
• CD-R/RW discs recorded using a personal computer or a
CD Recorder may not play if the disc is damaged or dirty, or
if there is dirt or condensation on the player’s lens.
• Unfinalized CD-R/RW discs can be played, but not all time
information (playing time, etc.) will be displayed.
• Check the copyright laws in your country before recording
from DVD VIDEO, SVCD, Video CD, Audio CD, MP3 and
JPEG discs. Recording of copyrighted material may infringe
copyright laws.
CAUTION! –– POWER
Disconnect the main plug to shut the power off completely. The
POWER button in any position does not disconnect the main
button
line. Power can be controlled from the remote.
PRODUCTS WITH 525P PROGRESSIVE SCAN OUTPUTS
NOTICE REQUIREMENTS
“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINI-
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN
THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525P DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.”
Legal Notices Regarding
Macrovision’s Property Rights
“U.S. Patent Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,
093; and 6,516,132.”
“ This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disas-
sembly is prohibited. “
G-CODE is a registered trademark of Gemstar Development
Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
The G-CODE system is manufactured under license from Gemstar
Development Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC INFORMATION
nPlayable Disc types
Disc Types
Logos
Characteristics
This unit can playback DVD-Video discs and the
region code is printed on the rear of the unit.
DVD-VIDEO
DVD－R, DVD－RW and DVD＋R, DVD＋RW, discs
DVD－R/ RW
written in the DVD-Video format and finalized.
DVD＋R/ RW
Video with CD sound, VHS quality & MPEG-1
compression technology.
Video CD (VCD)
Super Video CD (SVCD)
CD is recorded as a Digital Signal with better audio
quality, less distortion and less deterioration of audio
quality over time.
Audio CD
This unit can play CD-R and CD-RW discs recorded
with Audio CD or Video CD format, or with
J PEG/ BMP/ MP3 files. Close the sessions or finalize
the disc after recording.
CD-R/ RW
(J PEG/ BMP/ MP3)
nRecordable Disc types
Disc Types
Logos
Characteristics
DVD＋R/ RW
DVD＋R disc written in the DVD＋VR format.
DVD＋RW disc written in the DVD＋VR format.
Notes:
The DVD-Video/DVD+RW/DVD+R/ Logos are trademarks of
the respective companies.
nVideo System (PAL)
For best results, use discs with the above logos. The unit
may not playback other discs correctly. Do not use irregular-
shaped discs (e.g. heart-shaped), as these can damage the unit.
It may not be possible to play CD-R, CD-RW, DVD-R, DVD-
RW, DVD+R, DVD+RW in all cases due to the type of disc or
condition of the recording.
This DVD recorder accepts PAL signal input.
nAspect Ratio
4:3 (Letter Box) Standard
Unplayable disc types
The unit does not playback disc type listed below. If you try
to play back these discs, excessive noise may cause damage to
your speakers.
4:3 Pan & Scan
1) Unfinalized discs from other DVD recorders.
2) DVD-VR, DVD AUDIO, PHOTO CD, SACD
(When placing an unplayable disc on the disc tray, the DVD
recorder will display “Unknown Disc” on the display panel after
attempts of trying to loading the disc fail.)
16:9 (Wide-Screen)
nOthers
nRegion code of DVD-Video
This unit can playback DVD-VIDEO discs compatible with
the region code printed on the rear of the unit.
Audio : Appears at the beginning of a scene recorded
with multiple audio languages.
Example of playable DVD-VIDEO disks:
Subtitle: Appears at the beginning of a scene recorded
with multiple subtitle languages.
nAudio System
Angle : Appears at the beginning of a scene recorded
from multiple angles.
Dolby Digital
Linear PCM
DTS (Digital Theater Systems)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
The Remote Control
Remote Control
1) CH+, CH- buttons (
,
)
2) Open/Close button ( OPEN/CLOSE)
3) Copy button (COPY)
4) Flex Timer button (FLEX TIME)
5) Numeric buttons (0, 1~9)
6) Guide button (
GUIDE)
7) Navigation button ( NAVI)
8) Source button (SOURCE)
9) Disc menu button (DISC MENU)
10) Cursor (pqtu), OK buttons (OK)
11) Play button ( PLAY)
12) Stop button (
13) Skip buttons (
STOP)
PREVIOUS/
NEXT )
14) Record button (RECORD)
15) HDD/DVD button (HDD/DVD)
16) POWER ON/STANDBY button (STANDBY-ON)
17) System Menu button (SYSTEM MENU)
18) Display button (DISPLAY)
19) Browser (BROWSER)
To install batteries
20) G-Code button (G-Code)
—
Open the battery compartment and insert the
batteries. Make sure the polarities (+
and -) match the marks indicated
inside the remote control.
21) Disk Tools button (TOOLS)
22) Playlist/Menu button (PLAYLIST / MENU)
23) Pause/Step button (
PAUSE/STEP)
CAUTION!
—
Remove batteries if they are ex-
24) CM SKip button (CM Skip)
hausted or if the Remote Control will
not be used for a long time
25) F.F./REW. buttons(
26) Edit button (EDIT)
27) Timer button (TIMER)
REW./
F.F)
—
—
Do not use old and new or different types of
batteries in combination
Batteries contain chemical substances, so they
should be disposed properly.
Remote sensor
The remote has a range of
approximately 3m and works
best when pointed directly at
the unit horizontally at angles
up to 30° from the front of the
unit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
Front panel connections
(for reference only)
Names of parts and controls
1) POWER ON/OFF Button
7) OPEN/CLOSE Button
Opens or closes the disk tray.
Turns the recorder on and off.
8) PLAY Button
Plays a disk.
2) DISC TRAY
Holds discs securely during recording or playback
9) S TOP But t on
Stops playing or recording a disk.
3) DV-LINK (IEEE-1394) Jack
Connects digital video camcorders to this DVD Recorder.
10) HDD/DVD Button
Press to switch between HDD and DVD.
4) DVD Indicator
Lights up when DVD is set as the target device.
11) RECORD Button
Starts recording.
5) DISPLAY Panel
Operation indicators are displayed here.
12) SOURCE Button
Select equipment connected to the line inputs.
6) HDD Indicator
Lights up when HDD is set as the target device
13) FRONT AV (VIDEO/AUDIO L/R) Jacks
Connects the input of external equipment.
Display window
1) Play indicator
2) DVD indicator
3) SVCD indicator
4) VCD indicator
5) CDDA indicator
6) FILE indicator
7) CD indicator
9) Pause indicator
10) Record indicator
11) Timer record mode
12) Multi-information window
13) DVD+RW indicator
14) CD-R/DVD-R indicator
15) CD-RW/DVD-RW indicator
8) DVD+R indicator
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND DISPLAYS
Rear panel connections
(for reference only)
Names of parts
1) TUNER(TV/ANTENNA)Jacks
Connects TV/ANTENNA for signal output/input.
Note:
5) LINE OUT (VIDEO/AUDIO L/R) Jacks
Composite signal output.
Playback signals don’t go through here. Make
proper connections before using this DVD Recorder.
6) LINE OUT (S-VIDEO) Jack
S-Video signal output.
2) LINE IN (S-VIDEO) Jack
7) DIGITAL AUDIO OUT (COAXIAL) Jack
S-Video signal input.
Connects an amplifier or receiver having a digital input jack.
3) AV2 Rear (VIDEO/AUDIO L/R) Jacks
8) DIGITAL AUDIO OUT (OPTICAL) Jack
Composite signal input.
Connects an amplifier or receiver having a digital input jack.
4) COMPONENT VIDEO OUTPUT (Y/Pb/Pr) Jacks
9) AC In Terminal
Component signal output.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Before making connections
1) Do not plug the AC power cord into the outlet until all other connections are made.
2) Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a viewing problem when playing back a copy-protected disk. You may also have a viewing problem when connecting the unit
to an integrated TV/Video system.
Connecting to the antenna outlet and the television
Before using the unit, follow the steps below to connect the unit to the antenna cable and TV.
Connecting to a TV with COMPOSITE jacks
Use a RF cable (supplied) to connect the ANTENNA IN on the unit to the antenna outlet.
Use a RF cable (same as supplied) to connect the TV OUT on the unit to the RF input on the television.
Use AUDIO/VIDEO cables (supplied) to connect the AUDIO/VIDEO output on the unit to the audio/video input on the television.
Notes:
1. Do not place this unit on top of other equipment that may generate heat. Excessive heat may cause this unit to
malfunction.
2. For Digital Cable and Satellite TV users please connect your decoder’s output to this unit’s input.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR BETTER VIDEO QUALITY
There are two types of connections (S-Video, and Component video) that provide higher quality
viewing.
1. Connecting to a TV via S-Video out
Connecting to a TV with a S-Video jack
Use a S-Video cable (not supplied) to connect the S-Video output on the unit to the S-Video input on the television.
Notes:
1. Enter system setup to enable S-Video (refer to the section titled “Quick Setup”).
2. When using S-Video connections, please remove all other video output connections.
In this configuration, the Red and White audio cable connections are required (refer to the section titled “For better Audio Quality”.)
2. Connecting to a TV via COMPONENT out
Connecting to a TV with component jacks
Use COMPONENT cables (not supplied) to connect the COMPONENT output on the unit to the COMPONENT input on the
television.
Notes:
1. Enter system setup to enable COMPONENT (refer to the section titled “Quick Setup”).
2. When using COMPONENT connections, please remove all other video output connections.
3. In this configuration, the Red and White audio cable connections are required (refer to the section titled “For better Audio Quality”.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR BETTER AUDIO QUALITY
There are two types of audio connections, analog and digital.
Connecting to a stereo audio amplifier or receiver
Use an audio cord to connect the AUDIO OUT on the unit to the
audio input on a stereo amplifier or a receiver.
Connecting to a digital audio device
Connect an amplifier with Dolby Digital and DTS decoders to enjoy surround sound.
Digital out optical
Use a fiber-optic cable (not supplied) to connect the DIGITAL
OUT OPTICAL (digital optical output) on the unit to the digital
optical input on an stereo amplifier or a receiver.
Digital out coaxial
Use a coaxial cable (not supplied) to connect the DIGITAL
OUT COAXIAL (coaxial digital output) on the unit to the
coaxial digital input on an stereo amplifier or a receiver.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING SATELLITE RECEIVER OR CABLE BOX
Connecting the cable box/satellite box and television
Before using the unit, follow the steps below to connect the unit to the cable box and TV.
Connecting to a satellite box or a cable box with COMPOSITE jacks
Use AUDIO/VIDEO cables to connect the AUDIO/VIDEO output of the unit to the AUDIO/VIDEO input on the cable box or satellite
receiver.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM MENU
2. Select “System” using [p] [q] and press [OK].
3. Select “video output” as “COMPONENT” or “PROGRESSIVE”
using [p] [q] and press [OK]. (Reference the “GUI operation”
section for details)
Remote Control & system menu
Follow the steps below to reset personal preferences for using
the DVD recorder. Confirm that all connections are secured
properly.
4. When all settings are correct, press [t] to return to the
main menu.
5. To exit the system menu, press the [SYSTEM MENU] button.
1. Press [ STANDBY-ON] to turn on the unit.
2. Press [SYSTEM MENU] to display the system menu.
3. Press [p] [q] to select “System,” “Language,”
“Playback,” “Record,” “Audio,” “TV Tuner” or “EXIT”
and press [t] [u] to return to the previous menu.
4. Press [p] [q] to select the item you want to change
and press [u] or [OK].
Progressive Scan mode
You can change the video output mode when you press the
[SYSTEM MENU] button and to select “System-->Video
Output-->Progressive.”
select “System” icon to set: Video Output, Date and Time
select “Language” icon to set: OSD
Video output mode:
select “Playback” icon to set: Aspect Ratio
select “Record” icon to set: Quality ( M1, M2, M2x, M3,
M4 and M6)
576i: Interlace video
576p: Progressive video
select “Audio” icon to set: Digital Output (PCM / Bit
Stream)
(Reference the “GUI operation” section for detailed menu)
5. Press [OK] to confirm the setting.
6. Press [SYSTEM MENU] to exit the system menu or press
[t] to return to the previous menu.ot
Note:
You must connect the component output on the unit to a
576p compatible television.
Notes:
If you accidentally set “PROGRESSIVE” as the VIDEO OUTPUT
when not connecting to a progressive scan-compatible TV, you
may lose the video signal on your TV instantly. To get the
picture back, press [u] and the numbered buttons “5,” “0,” “2”
and “0” on the remote control and then [OK] to re-set the video
output.
To record TV programs using the Timer Record feature, you
must set the time accurately.
Setting the date and time (in SYSTEM category)
A power failure could result in incorrect date/time settings. The
correct time needs to be reset.
Setting Aspect ratio (in PLAYBACK category)
Set the date
Select “4:3” (regular) or “16:9” (widescreen) to suit your
television. If you have a regular 4:3 television, you can also
select how video title on some discs is presented.
1. Press the [SYSTEM MENU] button and the system menu will
be displayed.
2. Select “System” using [p] [q] and press [OK].
3. Select “Date” using [p] [q] and press [OK].
4. Change the day/month/year in the highlighted field using [p]
[q] or the numbered buttons (0~9) on your remote control and
confirm by pressing [OK].
4:3 L.Box (4:3 Letter Box)
Select when you connect the unit to a normal
(4:3) TV.
When playing back a DVD-VIDEO disc
recorded in wide picture format, the picture is
shown with black bars at the top and bottom.
5. When all settings are correct, press [t] to return to the
main menu.
6. To exit the system menu, press the [SYSTEM MENU] button.
4:3 Pan (4:3 Pan & Scan)
Select when you connect the unit to a normal
(4:3) TV.
Set the time
1. Press [SYSTEM MENU] on the remote control. The system
menu will appear.
When playing back a DVD-VIDEO disc
recorded in wide picture format, the picture is
zoomed to fill the screen vertically, and the
left and right sides of the image are chopped
off. Note, however, that the picture will be shown in the 4:3 L.
Box (4:3 Letter Box) mode even if you select the 4:3 Pan (4:3
Pan & Scan) mode depending on the disc.
2. Select “System” using [p] [q] and press [OK].
3. Select “Time” using [p] [q] and press [OK].
4. Change the “hour/minute/second” in the highlighted field
using [p] [q] or the numbered buttons (0~9) on your
remote control.
5. Change the “AM/PM” mode using [p] [q] and confirm by
pressing [OK].
6. When all settings are correct, press [t] until returning to
the main level.
16:9 Wide (16:9 Wide Screen)
Select when you connect the unit to a
wide-screen (16:9) TV.
7. To exit the system menu, press the [SYSTEM MENU] button.
Note:
Check that the clock is correctly set before initiating the timer
recording function. If the clock is set incorrectly, Timer Record
results may not be accurate.
Setting Audio (in AUDIO category)
Digital Output
PCM / Bit Stream
(Enable digital audio output with PCM or encoded data)
Setting video output (in SYSTEM category)
1. Press the [SYSTEM MENU] button and the system menu will
be displayed.
DTS Out
ON / OFF
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV CHANNEL SETUP
TV channel scanning
9. The channel scanning starts. This process may
take a few minutes.
When the “scan channel” function is activated, the TV channels
are searched and stored in a specific order. If the channel
assignment of your TV content provider is changed or if you are
reinstalling this DVD recorder, you may need to start this
procedure again.This will replace the TV channel stored with the
new ones.
10.When all the TV channels have been searched
and stored, press [SYSTEM MENU] to exit.
Note:
Before scanning channel, set the “TV signal” and “country” for
initiation.
If the available channel number in your residence area exceeds
the maximum receivable channel numbers of this DVD
Recorder, the scan will be discontinued. The maximum
receivable channel numbers are:
1. Ensure the antennas are securely connected to
the DVD recorder.
Antenna: 168 (chs)
2. Switch on the TV set and the DVD recorder.
Cable:
Auto:
104 (chs)
168 (chs)
3. Press [SYSTEM MENU] to display the system
menu, press [p] [q] to select the “TV
TUNER” icon and press [u].
4. Press [p] [q] to select “TV signal”and press [u].
Fine-tuning TV channels manually
5. Press [p] [q] to select “cable,” “antenna” or
“auto” depending on how you receive your
terrestrial TV channels and press [OK]. Press
[t] to return to the previous menu and save the
setting.
If you select “auto,” the unit will automatically scan channels
available at both cable and antenna connections, which might
take longer than needed.
After you have performed the channel scanning, you may like to
fine-tune the TV channel signal manually. Follow the steps
below to complete fine tune.
1. Press [SYSTEM MENU] to display the “system
menu,” press [p] [q] to select the “TV TUNER”
icon and press [u].
2. Press [p] [q] to select “FINE TUNE” and press
[u].
3. Press [p] [q] to fine-tune the channel signal.
6. Press [p] [q] to select “Country” and press
[u]. Press [p] [q] to select the country of your
residence from the list and press [OK] to save the
settings. Press [t] to return to the previous
menu.
4. When complete, press [SYSTEM MENU] to exit the
system menu.
Editing TV channels manually
After you have performed channel scanning, you may like to
further edit the TV channels. This function allows manually
adding/deleting channels, swapping channel order, inserting a
channel to a specific order, renaming the channels and so on.
1. Press [SYSTEM MENU] to display the “system
menu,” press [p] [q] to select the “TV TUNER”
icon and press [u].
7. Press [p] [q] to select “Utilities” and press [u].
2. Press [p] [q] to select “Utilities” and press [u].
8. Press [p] [q] to select “scan channel” and
press [OK] to start channel scanning.
If you wish to stop scanning, move to “stop scan” and press
3. Press [p] [q] to select “Edit Channel” and press
[u]. The Channel Editor menu will be displayed.
For detailed operation instructions on the “Channel Editor”
menu, refer to the “Channel Editor” section.
[OK]. The scanning process will be discontinued.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL EDITOR
To access to the Channel Editor menu, press [SYSTEM MENU],
select “TV TUNER,” “Utilities,” “Edit channel” and press [OK].
Or, press [SOURCE] to set “TV” as the input signal source and
press [EDIT]. Either way, the Channel Editor menu will be
displayed.
Swapping TV channels
This function allows you to manually swap the TV channel order
stored in the unit to match the TV channel order stored in your
TV set.
1. Press [p] [q] to select a TV Channel and press
Moving up or moving down the TV channel
[u].
1. Press [p] [q] to select one of the TV channels
and press [u].
2. Press [p] [q] to select “Swap with” and press
[OK].
2. Press [p] [q] to select “Move Up” or “Move
Down” and press [ENTER].
The order of the TV channel will be changed.
Each time you press [p] or [q] and the item changes as
follows:
3. Press [t] [u][p] [q] to enter the “Channel
number,” and press [OK] to swap. The order of
the channels will be swapped with the channel
number entered.
4. To swap other TV channels, repeat step 1- 3 to
complete the settings.
5. Press [t] [u][p] [q] to select “EXIT,” press
[OK] to save the setting and exit the “Channel
Editor” menu.
3. To move the location of other TV channels, repeat
step 1~2 to complete the settings.
4. Press [t] [u][p] [q] to select “EXIT,” press
[ENTER] to save the setting and exit the
“Channel Editor” menu.
Inserting TV channels
1. Press [p] [q] to select a TV channels and
press [u].
2. Press [p] [q] to select “Insert To” and press
[ENTER].
Renaming TV channels
3. Press [t] [u][p] [q] to enter the “Channel
number,” and press [ENTER]. The channel will be
moved to the desired location.
1. Press [p] / [q] to select a TV channel and press
[u].
2. Press [p] [q] to select “Rename” and press
[OK].
The display for
entering a title name
appears.
3. Select the desired
characters from the
keypad. Press [OK]
after each entry.
4. To change the locations of other TV channels,
repeat step 1~3 to complete the settings.
4. When you finish
entering the title
name, press [t] [u] [p] [q] to
select “Finish” to press [OK].
5. Press [t] [u][p] [q] to select “EXIT,” press
[ENTER] to save the setting and exit the
“Channel Editor” menu.
Notes:
You can only enter up to 10 characters for a name.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
®
CHANNEL EDITOR
Setting up G-Code system
Thanks to this programming system, you no longer need to
tediously enter the date, programme number, start and end
times. All the information needed by the DVD recorder for
Turning on or turning off TV channels manually
After you have performed the channel scanning process, you
may like to add or delete some of the TV channels. This function
allows turning on the channel not found at channel scanning or
turning off the channel found manually.
®
programming is contained in the G-Code programming number.
®
This 9-digit G-Code programming number is found in most TV
listings magazines.
Before setting up, confirm that the all cables are securely
connected.
1. Press [p] [q] to select a TV Channel not found at
channel scanning and press [u].
®
Setting up the G-Code system
2. Press [p] [q] to select “Turn on” and press
[OK]. The TV channel selected will be turned on.
To turn off the TV channel, move to “Turn off” and press [OK].
The TV channel selected will be turned off.
1. Press the [SOURCE] button to set TV as the
input signal source.
2. Press [EDIT] to display the “Channel Editor”
menu.
3. To turn on other TV channels, repeat step 1~ 2 to
complete the settings.
3. Press [p] [q] to go to a channel and press
4. Press [t] [u][p] [q] to select “EXIT,” press
[OK] to save the setting and exit the “Channel
Editor” menu.
[OK].
4. Press [t] [u] [p] [q] to go to “G-Code” button
and press [OK].
The menu to enter GCN is displayed.
5. Use the numbered buttons (1~9) to enter the
GCN and press [OK] when done.
Press [t] [u] to go back to advance/return to the previous/
next digit.
6. To set GCN for other channels, repeat steps 3~5.
7. When complete, press [p] [q] to go to “EXIT”
and press [OK] to exit the channel editor menu.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE MENU: PLAYBACK
6. Press [
PAUSE] to pause playback.
Guide menu is a unique user interface to guide
you through basic functions of this recorder. By
using the Guide menu, it is less time-consuming
to operate this system. Users no longer need to
go through normal operations that may require
far more steps and different interfaces.
Press [ PLAY] to resume normal playback .
Press [ STOP] to stop playback at a marked stop.
Press [
STOP] twice to bring the playback to a full stop.
Playback music files
1. Press [ GUIDE] to display the Guide menu.
Playback video files
2. Press [p] [q] to select “Playback” and then
press [OK].
1. Press [
GUIDE] to display the Guide menu.
3. Press [p] [q] to select DVD or HDD and then
press [OK].
2. Press [p] [q] to select “Playback” and then
press [OK].
4. Press [p] [q] to select “music” and press
[OK].
The browser menu is displayed.
3. Press [p] [q] to select DVD or HDD and then
press [OK].
5. Press [t] [u] [p] [q] to select a music file
you want to play and press [OK].
If you want to go to the next page or to the return previous page,
you can select the [
] [
] icon or the page number icon.
6. Press [ PAUSE] to pause playback.
Press [ PLAY] to resume normal playback .
Press [ STOP] to stop playback.
4. Press [p] [q] to select “Video” and press
[OK].
Playback picture files
The browser menu is displayed.
1. Press [
GUIDE] to display the Guide menu.
2. Press [p] [q] to select “Playback,” and then
press [OK].
3. Press [p] [q] to select DVD or HDD and then
press [OK].
4. Press [p] [q] to select “Pictures” and press
[OK].
5. Press [t] [u] [p] [q] to select a title (program)
you want to play and press [OK].
If you want to go to the next page or return to the previous page,
you can select the [
] [
] icon or the page number icon.
5. Press [t] [u] [p] [q] to select a picture file
you want to play and press [OK].
If you want to go to the next page or return to the previous page,
you can select the [
] [
] icon or the page number icon.
6. Press [ PAUSE] to pause playback.
Press [ PLAY] to resume normal playback .
Press [ STOP] to stop playback.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE MENU: PLAYBACK, RECORD
Playback pictures with music
Record on the HDD
1. Press [
GUIDE] to display the Guide menu.
1. Press [
GUIDE] to display the Guide menu.
2. Press [p] [q] to select “Record” and then
2. Press [p] [q] to select “Playback” and then
press [OK].
press [OK].
3. Press [p] [q] to select DVD or HDD and then
press [OK].
4. Press [p] [q] to select “Pictures with music” and
press [OK].
The browser menu of picture files will be displayed.
3. Press [p] [q] to select the Signal- Input ( TV,
AV1, AV2, S-Video, DV) and press [OK].
If you select “TV,” press [p] [q] to select the channel you want to
record and press [OK].
5. Press [p] [q][t] [u] to select the picture file to
start playback with and press [OK].
The browser menu of audio files will be displayed.
6. Press [p] [q][t] [u] to select the music file to
start playback with and press [OK].
Playback will start.
7. Press [p][q] to select “Rotate RIGHT” or “Rotate
LEFT” and “Rotate UP” “Rotate down.”
Press [t] or [u] to skip the picture.
4. Press [p] [q] to select “HDD” and press [OK].
Press [
NEXT ] or [
PREVIOUS ] to skip the
MP3 file.
8. Press [
PAUSE] to pause playback.
Press [ PLAY] to resume normal playback .
Press [ STOP] to stop playback.
5. Press [p] [q] to select “Recording mode” and
then press [OK].
Playback the last recorded title (on HDD only)
1. Press [
GUIDE] to display the Guide menu.
2. Press [p] [q] to select “Playback” and then
press [ENTER].
3. Press [p] [q] to select HDD and press [OK].
4. Press [p] [q] to select “Last Record” and press
[OK].
Playback of the title last recorded on your HDD will begin.
If you select “TV” in step 3, press [p] [q] to select TV audio and
press [OK].
6. Press [OK] to start recording.
5. Press [
PAUSE] to pause playback.
Press [ STOP] to stop recording.
Press [ PLAY] to resume normal playback .
Press [
PAUSE] to pause recording.
Press [ STOP] to stop playback at a marked stop.
Press [
STOP] twice to bring the playback to a full stop.
Note:
You can press the [GUIDE] button to exit the Guide menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE MENU: RECORD, TIMER RECORD
Record on DVD
Timer Record (Date/Time Setting)
1. Press [
GUIDE] to display the Guide menu.
1. Press [
GUIDE] to display the Guide menu.
2. Press [p] [q] to select “Record” and then
2. Press [p] [q] to select “Timer Record” and
press [OK].
then press [OK].
3. Press [p] [q] to select “Date/Time Setting” and
3. Press [p] [q] to select the Signal-Input (TV,
AV1, AV2, S-Video, DV ) and press [OK].
If you select “TV,” press [p] [q] to select the channel you want to
record and press [OK].
press [OK].
4. Press [p] [q] to select “DVD” and press [OK].
5. Press [p] [q] to select “Recording mode” and
then press [OK].
4. Press [p] [q] to select the Signal-Input (TV,
AV1, AV2, S-Video, DV) and press [OK].
If you select “TV,” press [p] [q] to select the channel you want to
record and press [OK].
If you select “TV” in step 3, press [p] [q] to select TV audio and
press [OK].
5. Press [p][q] to select “Once,” “Daily,” or “Weekly.”
6. Press [OK] to start recording.
Press [ STOP] to stop recording.
Press [
PAUSE] to pause recording.
6. Press [p][q] [t] [u] or the numbered buttons
(0~9) to set the date and press [OK] when done.
Note:
When placing an recordable DVD disc on the disc tray, the disc
preparation process will take place in the background. This
process only takes a few moments.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE MENU: TIMER RECORD
7. Press [p][q] [t] [u] or the numbered buttons
(0~9) to set the time and press [OK] when
done.
If you select “TV” in step 4, press [p] [q] to select TV audio and
press [OK].
11. The “Timer Record information” will appear and
press [OK] to confirm the settings.
8. Press [p][q] to set “Length” and then press [OK] .
13. Press [u] and [OK] to exit the timer record
9. Press [p][q] to select “Device” and then press
settings.
[OK] .
14. Press [ STANDBY-ON] to turn the recorder
off to activate Timer Record function.
10.Press [p] [q] to select “Recording mode” and
press [OK].
®
Timer Record (G-Code Setting)
1. Press [
GUIDE] to display the Guide menu and
press [OK].
2. Press [p] [q] to select “Timer Record” and
then press [OK].
Note:
3. Press [p] [q] to select “G-Code Setting” and
For Timer Record, there are seven recording modes for recording
on DVD disc: M1, M2, M2x, M3, M4, M6 and Just Fit. The “Just
Fit” recording mode is only applicable when recording onto DVD
disc. When the recording mode is set to be “Just Fit,” the
recording mode will be automatically adjusted depending on how
much recording space is available on the disc.
press [OK].
4. Press [p] [q] to select once, daily or weekly
and press [OK].
19
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE MENU: TIMER RECORD, COPY
6. Use the numbered buttons to enter the G-Code
programming number and then press [OK] .
3. Press [p] [q] to select “From HDD to DVD” and
press [OK].
7. After entering the G-Code programming number, the
“GCN” and “Present channel number” will be
displayed. Press [OK] to set the preset the channel.
4. Press [ OPEN/CLOSE] to open the disc tray and
insert a recordable DVD disc. Press the button
again to close the tray.
The disc preparation process will take place in the background.
This process only takes a few moments.
8. Press [p][q] to select “DVD” or “HDD” and then
press [OK] .
5. Press [p] [q][t] [u] to select the file to copy and
9. Press [p] [q] to select “Recording mode” and
then press [OK].
press [OK].
The “Just Fit” recording mode is only applicable when recording on
a DVD disc.
6. When complete, go to “EXIT” and press [OK].
10. Press [p] [q] to select TV audio and press [OK].
Copy (From DVD to HDD )
11 . The “Timer Record information” will be displayed.
Press [OK] to confirm the settings.
1. Press [
GUIDE] to display the Guide menu.
2. Press [p] [q] to select “Copy” and press [OK].
3. Press [p] [q] to select “From DVD to HDD” and
press [OK].
11.Press [u] and [ OK] to exit the G-Code
®
setting menu.
12. Press [STANDBY-ON] to turn the recorder off
to activate Timer Record function.
4. Press [ OPEN/CLOSE] to open the disc tray and
insert the DVD disc. Press the button again to
close the tray.
Copy (From HDD to DVD)
5. Press [p] [q][t] [u] to select the file to copy and
1. Press [
GUIDE] to display the Guide menu.
press [OK].
2. Press [p] [q] to select “Copy” and press
6. When complete, go to “EXIT” and press [OK].
[OK].
Note:
Note:
You can only copy picture files (in JPEG or BMP formats), audio
You can only copy picture files (in JPEG or BMP formats), audio
files (in MP3 format) and recorded video titles.
files (in MP3 format) and recorded video titles.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Before recording
Cautions:
To stop recording
When you press [
STOP] , it may take a few moments for
recording to stop and the session to close.
1. This DVD recorder records on both DVD+R/+RW discs and
the built-in HDD.
2. Please use recommended recordable DVD+R/RW discs to
ensure the best recording quality.
3. DVD+R is a write-once DVD disc.
4. DVD+RW is a re-writable DVD disc.
5. You cannot add new recording to DVD+R discs after the
disc is finalized.
6. In some cases, you may not be able to add new recording
to the recordable DVD discs that contain contents written
To pause recording
Press [
PAUSE] to pause recording, and press [
on other DVD recorders.
PAUSE] again to resume recording.
Recording television programs
1. Press [STANDBY-ON] to turn the unit on.
2. Press the [HDD/DVD] button to set the target
device as “HDD” or “DVD.”
If “DVD” is selected as the target device, press [ OPEN/
CLOSE] to open the disc tray and insert a recordable DVD disc.
Press the button again to close the tray.
To change the recording mode before recording:
Press [SYSTEM MENU] button.
When you insert a new recordable DVD disc, the DVD recorder
automatically starts the disc preparation process.
3. Press [SOURCE] and press [p] [q] to select “TV”
as the signal-input source.
4. Press [ CH +] [ CH - ] or press [p] [q] to select
the TV channel you want to record.
To change the TV Audio setting before recording:
Press [SETUP] button.
Notes:
You can also use the numbered buttons to select a channel.
Notes:
The new setting can't change the current recording mode but will
be activated during the next recording session.
4. Press [RECORD] to start recording.
When recording is completed it may take a few
moments for the session to close.
To check the disc status while recording
Press [DISPLAY] , the recording information appears.
Recording continues until you stop the recording or when the
DVD disc or the HDD is full.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Adding new recordings
Playback the last recorded title (on HDD only)
Press [uPLAY] or [ GUIDE] to start the
Adding new recordings after other recording
sessions.
playback of the last recorded title .
Press [RECORD] to start recording, and press
This function is only available when the desired title resides on
the HDD.
[
STOP] at the point you want to stop.
Using [uPLAY]
1. Press [uPLAY] and the last recorded title will
start playback.
Using [
1. Press [
icon.
GUIDE]
GUIDE] and select the “PLAYBACK”
2. Confirm that the playback device is HDD.
3. Press [p] [q] to go to the “Last Record” icon
Note:
and press [OK]. The playback will start.
Each new recording session is placed after the previous session
unless a certain recording title is set to be overwritten.
(Reference the “Overwrite” function in the “Editing” section for
additional details.)
Change Chapter Intervals
Creating chapters while recording
The DVD recorder can automatically divide a session into
chapters by inserting chapter marks at 5/10/15/20/25/30-minute
interval during the recording process.
1. Press [SYSTEM MENU] to display the system
menu.
2. Press [p] [q] to select the “RECORD” and press
[u].
3. Press [p] [q] to select “CHAPTER MARK” to set
up the interval time.
Notes:
1. If a power failure occurs, the program you are recording
may be lost.
2. Before you start, please check that the DVD disc or hard
disk has enough available space for the recording.
3. You can not change the recording mode during recording.
4. Before playing a DVD+R disc on another player, you first
need to finalize the disc.
4. Press [SYSTEM MENU] to exit the system menu.
Notes:
1. During recording, press [EDIT] to add chapter mark(s) in the
recorded session manually.
2. You can also start recording using the “Guide Menu.”
Press [
GUIDE], select “RECORD” and press [OK].
Follow the steps to set the recording mode.
3. Before you start, please ensure that the DVD disc or hard
disk has enough available space for the recording session.
4. You cannot change the channel or recording mode during
recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
To start recording
Recording from a VCR or Camcorder
1. Press the [HDD/DVD] button to set the target
device for the recording.
Before starting to record
This DVD recorder can accept standard CVBS (RCA) analog
audio/video cable or IEEE-1394 cable and record Camcorder
onto DVD in the digital video format of your choice. The unit
functions much like a digital VCR. Examples of use include
archiving videotapes or transferring from a Video Cassette
Recorder or Camcorder to a recordable DVD disc or hard disk
drive. This DVD recorder allows basic DV control with the DVD
Recorder’s remote control when connected via the DV Link.
2. Press [SOURCE] to select the signal-input (TV,
AV1 Front, AV2 Rear, S-Video, DV).
The front panel and rear panel connection
Connect a Video Cassette Recorder or Camcorder to the unit’s
input terminals.
3. Start to play on the VCR or Camcorder.
4. Press [RECORD] to capture your video/audio
signal from the VCR or Camcorder onto a recordable
DVD disc or hard disk.
5.Press [ STOP] to stop recording.
To pause recording
Press [
PAUSE] to pause recording. If you want to restart
PAUSE] button to resume recording.
recording, press the [
23
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
One-touch recording
Use “One-touch recording” to start recording immediately in 30-
minute blocks. Press [RECORD] twice to start a 30-minute
recording session. Press [RECORD] repeatedly to record longer
timed recordings, up to 6 hours in thirty-minute increments.
Pressing [RECORD] when the timed recording exceeds the 6-
hour constraint automatically sets “one-touch recording” off. For
recording on DVD discs, the length of recording depends on the
current recording mode/speed and the amount of time available
on the disc. For recording on the built-in HDD, the length of
recording is 6 hours maximum.
8. Press [p] [q] to select HDD or DVD and press
[OK].
DV recording
Before you start to record DV contents
This DVD recorder allows basic DV control functions with the
remote control. The DVD recorder is equipped with a camcorder
control (Play, Stop, FF or REW) feature via the DV Link
connection. Simply move the screen cursor to the desired
function on the DV input screen and press [OK] on the remote
control.
Use “Guide Menu” to record DV signal
1. Power on your TV and this DVD recorder.
9. Press [p] [q] to set the recording quality, and
press [OK] to confirm.
2. Connect the DV cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and the DVD-
Recorder.
10.Press [OK] to start recording.
3. Power on the DV Camcorder. Start “Playback
mode” on the DV Camcorder.
Notes:
This DVD-Recorder will stay in “Pause” mode when no DV input
signal is detected.
4. “Pause” the DV Camcorder at where you want to
record.
5. Press [
This activates the Guide menu.
GUIDE] on the remote control.
11.To pause recording.
Press [
PAUSE ] on the remote control to pause recording.
6. Press [p] [q] to select the “RECORD” icon, and
press [OK] to start recording.
Press [
PAUSE ] again, if you want to resume recording.
12.To stop recording.
Press [
] to stop recording.
Note:
Before playing a DVD+R disc on another player, you will first
need to finalize the disc. Reference the “finalize” function in the
“Disc Tools” section for additional information.
7. Press [p] [q] to select “DV” and press [OK] to
confirm.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
DV control
DV Recording (Con’t)
After recording is stopped, a DV control bar will appear on the
screen. This allows basic DV control utilizing this DVD
recorder’s remote control.
Before you start to record DV contents
This unit allows basic DV control on-screen. The on-screen
functions are accessed using the DVD recorder remote control.
1. Power on your TV and this DVD recorder.
2. Press the [HDD/DVD] button to set the target
device for the recording.
If “DVD” is set as the target device, press [ OPEN/CLOSE] to
open the disc tray and insert a recordable DVD disc with the
label side facing up.
3. Connect the DV Cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and this DVD
recorder.
1. Press [t] [u] to select (
) to fast-forward
the DV Camcorder.
4. Power on the DV Camcorder. Set “Playback
mode” on the DV Camcorder.
2. Press [t] [u] to select (
) to rewind the DV
Camcorder.
5. “Pause” the DV Camcorder at where you want to
record.
3. Press [t] [u] to select ( ) to stop the DV
Camcorder playing.
6. Press [SOURCE] to change the signal-Input
source and select “DV.”
4. Press [t] [u] to select ( ) to start the DV
Camcorder playing.
5. Press [t] [u] to select ( ) to pause the DV
Camcorder playing.
7. Resume DV Camcorder playback and press
[RECORD] on the DVD Recorder to start
recording.
Notes:
1. The DV-Link input jack on this unit is for use with DV
compatible camcorders only.
2. Only DV signals can be input to the DV-Link jack on this
DVD recorder.
3. Do not connect a MICRO MV format video camcorder to
this DV-Link (IEEE-1394) jack.
8. To pause recording.
Press [
Press [
PAUSE ] on the remote control to pause recording.
PAUSE ] again, if you want to resume recording.
9. To stop recording.
Press [
] to stop recording.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORD
Prior to timer record
8. Press [t] [u] [p][q] to select the “Repeat
(once, daily or weekly),” and then press [OK]
to bring up the list.
If you select “Once,” you need to set the date. Move the cursor
to highlight “date” and press [OK]. Use the numbered buttons
(0~9) or [p] [q] [t] [u] to enter the date.
Please ensure that the recordable DVD disc or the HDD has
enough available space for the Timer Record function. Before
you start to record, follow the steps to set the date, time,
picture quality and channel of the program or input source
manually. You can set up 16 individual sessions in the Timer
Recording function.
Setting the timer
1. Press [ STANDBY-ON] to turn the unit on.
2. Press [TIMER] to display the “Timer Record”
menu.
If you select “daily,” you do not need to set the date since the
Timer Record is set for each day until it is cancelled or the
media is full.
3. Press [p][q] to select an item from the timer
setting list and press [OK] to activate the system
setup menu for the Timer Record function.
If you select “weekly,” a weekly calender will display on the
screen for you to select the day. Press [p] [q] [t] [u] to move
the cursor to highlight the desired day and press [OK] to make
your selection. When completed, move the cursor to “EXIT” and
press [OK] to save the desired setting.
4. Press [t] [u] [p][q] to select the “Source
(Signal Source),” and then press [OK] to
bring up the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
5. Press [t] [u] [p][q] to select the “Channel (TV
Channel),” and then press [OK] to bring up
the list. This step only applies when the “TV” is
selected as the source.
Notes:
If the mode is set as “daily” or “weekly,” press [t] [u] [p] [q]
to move the highlighted cursor to the “advanced” icon and press
[OK]. You can choose to apply the setting “without restriction” or
“with restriction.” When “with restriction” is selected, enter the
“START” date and “END” date to set the period of time for a
valid setting. Move the highlighted cursor to “OK” and press [OK]
to confirm the setting or to “CANCEL” and press [OK] for
resetting.
Press [p] [q] [t] [u] and [OK] to make your selection.
6. Press [t] [u] [p][q] to select the “HDD/DVD,”
and then press [OK] to bring up the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
If “DVD” is set as the target device, press [ OPEN/CLOSE] to
open the disc tray and insert a recordable DVD disc.
7. Press [t] [u] [p][q] to select the “Quality
(Recording Quality),” and then press [OK] to
bring up the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORD
To check the recording status while Timer Record is
active
Press [DISPLAY] and the Timer Record information appears on-
screen.
9. Press [t] [u] [p][q] to select the “Start (Start
Time),” and then press [OK] .
Use the numbered buttons (0~9) or press [p] [q] [t] [u] to
enter the start time.
Notes:
1. When the Timer Record function is active, the “Timer
LED” on the DVD Recorder front panel will illuminate.
2. The DVD recorder must be turned off to activate the Timer
Record function.
10. Press [t] [u] [p][q] to select “End (End Time),”
and then press [OK].
®
Timer Record using the G-Code system
Use the numbered buttons (0~9) or press [p] [q] [t] [u] to
enter the end time.
1. Press [ STANDBY-ON] to turn the unit on.
2. Press [TIMER] to display the “Timer Record”
menu.
If you enter a wrong selection
Press [t] [u] to re-select the item you want to change.
3. Press [p][q] to select an item from the timer
setting list and press [OK] to activate the setup
menu for the Timer Record function.
11. If you select “TV” in step 4, press [t] [u] [p][q]
to select “SOUND (TV AUDIO)” and then press
[OK] to bring up the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
4. Press [t] [u] [p][q] to select the “G-Code”
button and then press [OK] to bring up setup menu.
Or press [ G-Code ] to bring up the G-Code menu.
12. Press [p][q] to select “OK” to save the setting
for the timer record item and go back to the
Timer Record list.
Press [p] [q] [t] [u] to [RESET] if you want to reset the timer
record item.
13. Press [p] [q] to go to another item on the list
and press [OK] if you want to set up for more
Timer Record programs.
If not, move to the “EXIT” icon and press [OK] to exit the Timer
Record List.
5. Press [t] [u] [p][q] to select “Repeat (once,
daily or weekly),” and then press [OK] to bring up
the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
6. Press [t] [u] [p][q] to select the “G-Code”
button and then press [OK] to enter the number.
Use the numbered buttons (0~9) or [p] [q] [t] [u] to enter the
G-Code programming number.
14. Press [ STANDBY-ON] to turn off the unit and
activate the “Timer Record” function.
To stop recording during Timer Record
When you press [
record to stop.
STOP ] , it may take a few seconds for the
27
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORD
7. Press [t] [u] [p][q] to select “HDD/DVD,” and
then press [OK] to bring up the list.
Press [p] and [OK] to make your selection.
If “DVD” is set as the target device, press [ OPEN/CLOSE] to
open the disc tray and insert a recordable DVD disc.
8. Press [t] [u] [p][q] to select “Quality
(Recording Quality),” and then press [OK] to
bring up the list.
Press [p] and [OK] to make your selection.
Press [t] [u] to re-select the item you want to change.
9. Press [t] [u] [p][q] to select “SOUND (TV
AUDIO)” and then press [OK] to bring up the list.
Press [p] [q] [t] [u] and [OK] to make your selection.
10. Press [p][q] to select “OK” to save the setting
for the timer record item and go back to the
Timer Record list.
11. Press [p] [q] to go to another item on the list
and press [OK] if you want to set up for more
Timer Record programs.
If not, move to the “EXIT” icon and press [OK] to exit the Timer
Record List.
13. Press [STANDBY-ON] to turn off the unit and
activate the “Timer Record” function.
Notes:
1. If you want to go back to the normal Timer Record menu,
move to the “Date/Time Setting” icon and press [OK].
2. The DVD recorder must be turned off to activate the Timer
Record function.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
FLEX TIME
The “Flex Time” feature allows you to “Pause Live TV” and
resume viewing at the point of interruption, at your leisure.
Record and Play
Note: “Pause Live TV” is constrained within 3 hours.
Follow the steps below to start playback of the recorded program
before the recording is scheduled to end.
Pausing Live TV Broadcast
1. During recording, press [uPLAY].
Playback will start from the beginning of the recorded program.
1. Press [ STANDBY-ON] to turn the unit on
2. Switch on your TV and set the video input to this
recorder.
3. Press [ CH+] [CH-] buttons on the recorder’s remote
control to select the desired channel.
Since the TV’s video input is set to be the recorder, channel
selection HAS to be made with the recorder’s remote control.
To turn the audio volume up and down, use the TV’s remote
control.
2. Press [
F.F.] [
REW ] to perform fast-
forward or fast rewind scanning.
Press [
PAUSE ] to pause playback. Press [
PAUSE ] again if you want to resume viewing.
4. When you choose to leave your TV and must
stop watching, press [FLEX TIME].
When [FLEX TIME] is pressed the video broadcast on TV is set in
pause mode. The scene displayed on the TV is the last picture
shown when you press the [FLEX TIME] button.
Press [
STOP] to stop playback/viewing.
Caution:
If you press [STOP] again, the recording function will be turned off.
5. When you are back in front of the TV and ready to
resume viewing, press [uPLAY] and the
TV program will begin playing starting from the
interrupted scene.
3. If you want to stop recording, press [ STOP] for a
second time.
Note:
6. Press [ F.F.] or [
REW ] to perform fast-
forward or fast rewind scanning (to the point where
[FLEX TIME] begins).
Press [
PAUSE ] to pause viewing. Press [
PAUSE ] again if you want to resume viewing.
7. Press [FLEX TIME] to turn the time shift function off
and switch to viewing live TV broadcast.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
DVD/VCD/SVCD video disc playback
Before you begin to enjoy the digital world of audio and video on DVDs, please ensure that you have made the correct settings in the
Setup menus. These settings should correspond to the capabilities of your home system. Having made the correct settings, you are
now ready to use the DVD recorder to enjoy DVDs, Video CDs, and CDs.
Basic playback
Press [ STOP] to stop playback at a
marked stop.
Turn on the television and select the appropriate video input on
the television to suit the connections for the player.
At a marked stop, press [ PLAY] to resume playback.
Press [
STOP] twice to bring the playback to a full stop.
Press [ STANDBY-ON] to turn on the unit.
Press to turn the unit on or off.
Press [ PLAY] to start playback from the beginning of the
disc.
Press [ DISPLAY ] to display disc status
during playback.
Press [ OPEN/CLOSE ] to open the disc
tray. Place the disc in the tray, label-side up.
Press [ DISC MENU ] to display the thumbnail
icons menu on the TV screen.
Press [ PLAY ] to start playback.
Press [ DISC MENU ] to return to the DVD’s title or disc root
menu for the current title during playback.
Press [
F.F. ] to perform fast forward
scanning.
VCD
SVCD
Press repeatedly to play the disc forward at 2x, 4x, 8x,or 16x
speeds.
Press [0 ,1~9 ] the numbered buttons to select an item of the
title menu.
DVD
Press [
REW ] to perform fast reverse
Press [p] [q] [t] [u] to select an item and press
[ENTER].
scanning.
Press repeatedly to play the disc reverse at 1x, 2x, 4x, 8x,
or 16x speeds.
Press [
NEXT] to advance to the next
chapter/track.
Press repeatedly to skip to the next chapter during playback.
Press [
PREVIOUS] to reverse to the
previous chapter.
Press repeatedly to return to the beginning of previous
chapters during playback.
Press [
Press [
PAUSE/STEP] to pause playback.
PAUSE/STEP] again to start
Sample Thumbnail display
“frame by frame mode.”
Press repeatedly to advance DVDs and Video CDs frame by
frame during playback in pause mode.
Press [ PLAY] to restart normal playback.
Press [ PLAYLIST/MENU] to display the title
menu on the TV screen.
Press [p] [q] [t] [u] to select an item and press [OK].
Press [BROWSER] to browse the contents
of a DVD disc or the HDD.
Notes:
The [PLAYLIST/MENU] button only functions while the unit is in
playback mode. Depressing this button during other operations
won’t work on this unit.
Press [HDD/DVD] to select HDD or ODD to
playback the contents saved.
Press [ CM skip ] to skip forward 30 seconds
during playback.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
A-B
REPEAT
Repeating a desired part.
Select “Point A” at the beginning of the part you
want to repeat.
Navigation operation
During playback, press [ Navi.] to display the “Navigation” menu.
Select “Point B” at the end of the part you want
to repeat.
The unit locates “A” and starts repeat playback
between “A” and “B.”
Select [Cancel]. The A-B repeat mode turns off,
then normal playback continues.
SUBTITLE During playback to select a subtitle language from
those available on the current disc.
REPEAT
Repeat playback. Move the highlighted cursor to
“REPEAT” and press [OK] repeatedly to choose
a repeat option. Depending on the type of Disc,
you may choose to play the Track, Title, file or
Disc repeatedly.
Note:
Notes:
For DVD, the repeat options are:
Some DVDs include subtitles in different languages. If you want
to choose subtitles, follow these steps.
repeat one <-> repeat off
For VCD and SVCD, the repeat options are:
repeat one <-> repeat all <-> repeat off
For CDDA (audio CD) and data discs, the repeat options are:
repeat one (except for JPEG files) <-> repeat all <->
shuffle mode <--> repeat off
AUDIO
To select a different audio language or soundtrack
during DVD playback.
ZOOM
Enables zoom in or out the selected viewing at
1x, 2x, 3x and 4x speed. Press [t] [u][p] [q]
to move the highlighted cursor to the desired
selection on the on-screen panel and press [OK].
SLOW MOTION
Enables the selection of a slow-motion speed.
You can choose to play the Disc at +1/2x, +1/4x
or -1/2x, -1/4x.
Notes:
Multiple languages or soundtracks must be available on the DVD.
SEARCH Initiates the search capability for locating a
desired position in the current title or track (time
search).
ANGLE
To select a different camera angle during DVD
playback.
Press the numeric buttons (0 to 9) to enter the
desired time or title.
No
Example (for DVD-VIDEO)
To playback from
TITLE:CHAPTER : 001/001
or TIME:0 1 : 2 7 : 3 3 (H:M:S)
Example (for SVCD/VCD)
Notes:
The Multiple Angles capability must be available on the DVD.
(within the current title) or track for playback.
To playback from
TIME:0 1 : 2 7 : 3 3
Press [t] to correct a mistake.
Press [t] repeatedly to move back to the digit
where you entered a wrong number, and re-enter
the correct one.
INFORMATION
To enable or disable the DVD/VCD/SVCD disc
information.
Press [OK] to start playback from the specified
time.
TO EXIT NAVIGATION
Notes::
Moving the cursor left through each menu takes you to the
previous level. Moving the cursor left at the first menu selection
closes the dialog box.
Press [Navi.] again or repeatedly press [t] to exit
the “Navi” menu. Or go to “EXIT” and press [OK].
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO TITLE PLAYBACK (BY BROWSER)
This unit can play video titles recorded on the HDD or the
recordable DVD disc.
Note:
The index page numbers shown on the bottom of the browse
menu varies with the number of titles/files saved on the HDD/
DVD disc and do not always follow the numeric order. This is
designed for easier access to each page when there are more
titles/files available.
Playing back video title
1. Place a disc with recorded video titles on the tray
or make sure that the video titles are saved on
the HDD.
2. Press the [HDD/DVD] button to select HDD or DVD.
3. Press the [BROWSER] button and this will bring
up the browser menu with thumbnails.
If you want to view the text menu, move the cursor to the “Text
View” icon and press [OK].
If you want to change the playback device, press [t] [u] to
move the highlight to the “HDD” icon or “DVD” icon (depending
what the source is set as) and press [OK] to change the setting.
4. Press [t] [u] to move the highlight to the “Video”
icon and press [OK] to view the file menu with
thumbnails.
If you want to view the text menu, move the highlight to the “Text
View” icon and press [OK].
5. Press [p] [q][t] [u] to move the highlight to the
file you want to start playback and press [OK].
6. Press [
Press [ STOP] to stop playback at a marked stop.
Press [ STOP] twice to bring the playback to a full stop.
PAUSE] to pause playback.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
MUSIC FILE PLAYBACK, PICTURE FILE PLAYBACK (BY BROWSER)
The unit can play an Audio CD, JPEG or MP3 files on a disc or
from the HDD.
Playing back picture files
Playing back JPEG/BMP files.
Playing back music files
Playing back MP3 files.
1. Place a JPEG/BMP disc on the tray or save the
JPEG/BMP files to the HDD. JPEG/BMP files
residing on the HDD can be played from the hard
disk.
1. Place a MP3 disc on the tray or save the MP3 files
to the HDD. MP3 files residing on the HDD can be
played from the hard disk.
2. Press the [HDD/DVD] button to select HDD or DVD.
3. Press the [BROWSER] button on the list and this
will bring up the browser menu with thumbnails.
If you want to change the playback device, press [t] [u] [p]
[q] to move the highlighted cursor to the “HDD” icon or “DVD”
icon (depending what the source is set as) and press [OK] to
change the setting.
2. Press the [HDD/DVD] button to select HDD or
DVD.
3. Press the [BROWSER] button on the list and this
will bring up the browser menu with thumbnails.
If you want to change the playback device, press [t] [u][p] [q]
to move the highlighted cursor to the “HDD” icon or “DVD” icon
(depending which source your desire) and press [OK] to change
the setting.
4. Press [t] [u] to move the highlighted cursor to
the “Music” icon and press [OK] to view the file
menu with thumbnails.
If you want to view the text menu, move the highlighted cursor to
the “Text View” icon and press [OK].
4. Press [t] [u] to move the highlighted cursor to
the “Pictures” icon and press [OK] to view the file
menu with thumbnails.
If you want to view the text menu, move the highlighted cursor to
the “Text View” icon and press [OK].
5. Press [p] [q][t] [u] to move the highlighted
cursor to the file you want to start playback from
and press [OK].
6. During playback, press [
NEXT ] or [
PREVIOUS] to advance to the next or return to
the previous file.
5. Press [p] [q][t] [u] to move the highlighted
cursor to the file you want to start playback from
and press [OK].
7. Press [
PAUSE] to pause playback.
6. During playback, press [t] [u] to advance to the
next or return to the previous file.
8. Press [ STOP] to stop playback at a marked stop.
Press [
STOP] twice to bring the playback to a full stop.
Notes:
1. If a MP3 file name includes any 2-byte character, the unit
may not display the file name correctly,
2. The unit cannot support ID3 tag.
3. The unit does not support MP3-Pro or WMA files.
4. The unit supports discs recorded with multiple sessions.
5. The unit can only playback picture or tracks with the following
file extensions; JPG or jpg, BMP or bmp and MP3 or mp3 etc.
6. The time required for reading disc contents may vary for
different discs. This is dependent upon the numbers of groups
(folders) and tracks (files) recorded and etc.
7. Press [p][q] to select “Rotate RIGHT” or “Rotate
LEFT” and “Rotate UP” or “Rotate DOWN.”
7. You cannot advance or reverse playback by pressing F.F. or
REW. during JPEG/MP3/BMP disc playback.
8. You cannot play audio track by pressing the numbered
buttons during MP3 disc playback.
8. Press [
PAUSE] to pause playback.
9. Press [ STOP] to stop playback at a marked stop.
Press [ STOP] twice to bring the playback to a full stop.
9. This unit supports MP3 file bitrates of: 32Kbps ~ 320Kbps.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO CD PLAYBACK, PLAYBACK PICTURES AND MUSIC
Playback will start.
Audio CD playback
Playing Audio CDs
8. During playback, press [
NEXT ] or [
PREVIOUS] to advance to the next or return to
the previous music file.
1. Place the Audio CD on the tray.
The disc will begin playback automatically.
9. Press [t] [u] to go to the next or return to the
previous JPEG file.
2. Press [
NEXT ] or [
PREVIOUS ] to
advance to the next track or return to previous
track.
Press [p][q] to select “Rotate RIGHT” or
“Rotate LEFT” and “Rotate UP” or “Rotate
DOWN.”
3. Press [
PAUSE] to pause playback.
10. Press [
Press [ STOP] to stop playback at a marked stop.
Press [ STOP] twice to bring the playback to a full stop.
PAUSE] to pause the playback.
4. Press [ STOP] to stop playback at a marked stop.
Press [
STOP] twice to bring the playback to a full stop.
5. Enter the numbered button (0~9) to select the
desired audio track, and press [OK].
Begin playing from a selected track.
Slide show (Pictures with Music)
Concurrent playing of pictures and music files on the
same disc.
1. Place the disc with the audio (MP3) and the
picture (JPEG/BMP) files on the tray or make sure
that the audio and picture files are saved onto
the HDD. The saved audio and music files can be
played from the hard disk.
2. Press [
GUIDE] for the Guide Menu.
3. Press [p] [q] to go to the “PLAYBACK” icon and
press [OK].
4. Press [p] [q] to select HDD or DVD to play the
files from and press [OK].
Note:
Music and picture files can be played concurrently when these
files are saved onto the same device.
5. Press [p] [q] to go to the “Pictures with music”
icon and press [OK].
The browser menu of picture files will be displayed first.
6. Press [p] [q][t] [u] to select the picture file to
start playback with and press [OK].
The browser menu of audio files will be displayed.
7. Press [p] [q][t] [u] to select the music file to
start playback with and press [OK].
34
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY
This DVD recorder is equipped with “One Touch Copy” feature,
which allows you to copy recorded files from the HDD to DVD or
from DVD to HDD. This function is only applicable to JPEG, BMP,
Copying from HDD to DVD
1. Press [ STANDBY-ON] to turn the unit and your TV on.
MP3 files and recorded video titles.
2. Press [ OPEN/CLOSE ] to open the disc tray and
place a recordable DVD disc with the label side up.
Make sure to insert a recordable DVD disc.
Copying from DVD to HDD
1. Press [ STANDBY-ON] to turn the unit and your TV on.
Press the button again to close the tray.
When you insert a new recordable DVD disc, the DVD recorder
automatically starts the disc preparation process.
2. Press [ OPEN/CLOSE ] to open the disc tray and
place the disc with the label side up.
3. Press the [HDD/DVD] button and select “HDD.”
4. Press the [BROWSER] button to browse the files.
3. Press the [HDD/DVD] button and select “DVD.”
4. Press the [BROWSER] button to browse the files.
5. Press [p] [q][t] [u] to move the highlighted
cursor to the file to be copied and press [COPY].
The file is then copied to the DVD disc.
5. Press [p] [q][t] [u] to move the highlight
cursor to the file to be copied and press [COPY].
The file is then copied to your HDD.
Note:
Transfer Speed from HDD
(based on 1 hour recording)
Recording
Mode
HQ
Transfer
Speed
X 4
Time
~ 18 minutes
~ 10 minutes
~ 8 minutes
~ 6 minutes
~ 4 minutes
~ 3 minutes
SP
X 8
Note:
SPP
LP
X 10
1. Title name, chapter markers(for video titles), as well as
thumbnail picture markers you see in the browser menu
are also copied.
X 12
EP
X 16
SLP
X 24
2. The chapter markers in the copied version may not be in
exact the same positions as the original when recording
on a Video mode disc.
3. You can’t use the One Touch Copy function to copy a title if
any part of the title is copy-once protected.
4. You may use this product only to reproduce or copy
materials for which you own the copyright or have which
obtained permission to copy from the copyright owner or
for you otherwise have a legal right to reproduce or copy.
Unless you own the copyright or have obtained permission
from the copyright owner or otherwise have a legal right to
reproduce or copy, you may be violating the law, including
copyright law, and may be subject to payment of damages
and other remedies.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT
Before starting to edit
Protecting a title (HDD and DVD)
This section explains the basic editing functions on the unit.
Please finish all the editing before finalizing the disc. You cannot
edit the contents on a finalized disc.
You can protect the title from accidental erasure or editing when
you activate the protect function.
When protection is turned “ON,” the title can’t be edited or
erased.
You can perform the editing functions on video titles only.
Browser menu
If you do need to edit it, you must first unlock the file.
1. Press [ STANDBY] and press [HDD/DVD] to
select the source “DVD” or “HDD” to browse
from.
1. Press [BROWSER] to display the “Browser” menu.
2. Press [t] [u] [p] [q] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
2. Press the [BROWSER] button to display the
“BROWSER” menu.
3. Press [p] [q] to select “Protection” and then
press [OK].
3. Press [t] [u] [p] [q] to select the title you want
to edit, and press [EDIT] to go to the edit screen.
4. Press [OK] to select the “On” or “Off.
5. Press [p] [q] to select “EXIT” and then press
[OK].
Naming a title (HDD and DVD)
Note:
1. Press [p] [q] to select “Rename” and then press
[OK].
You can NOT protect the recorded title(s) on a DVD+R disc if the
disc is finalized.
Overwriting a title (DVD only)
1. Press [HDD/DVD] to select the “DVD.”
2. Press the [BROWSER] button to display the
“Browse” menu.
3. Press [t] [u] [p] [q] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
2. The menu for the title naming is displayed.
4. Press [p] [q] to go to“Overwrite” and then
press [OK] to set it on or off.
The “Overwrite” mode is set.
3. Press [p] [q] to select the “Clear” icon and then
press [OK] before start entering the new title.
Press [t] [u] [p] [q] to select “Back” to delete
characters.
5. Press [p] [q] to select “EXIT” and then press
[OK].
Notes:
The “overwrite” function is not applicable to video titles saved on
the HDD or a DVD+R disc that is finalized.
4. Use [t] [u] [p] [q] and [OK] on the remote
control to select desired characters.
5. When you finish entering the title, press [t] [u]
[p] [q] to select “Finish” and press [OK].
Notes:
You only can enter up to 30 characters for a name. You can not
leave the title column blank.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT
Note:
Splitting a title (HDD and DVD+RW disc)
1. It’s not possible to merge a video title saved on a DVD+R disc.
2. For video titles saved on a DVD+RW disc, you can only
merge the title with its previous/next title only.
Use this function to divide a title into two distinct sessions on
either a disc or the HDD.
After splitted, the new title can still be merged again.
Erasing a title (HDD and DVD)
1. Press [BROWSER] to display the “Browser”
menu.
Use this function to erase a title.
Note that once erased, the title(s) cannot be retrieved.
2. Press [t] [u] [p] [q] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
1. Press [BROWSER] to display the “Browser” menu.
3. Press [uPLAY] to start the title playback first.
2. Use [t] [u] [p] [q] to select the title you want to
edit and then press [EDIT] to go to the edit
screen.
Press [
to the next chapter or the previous chapter.
Press [ F.F.] or [ REW ] to perform fast
NEXT] or [
PREVIOUS] to advance
forward or fast rewind scanning.
3. Press [p] [q] to select “Erase.”
4. Move the highlighted cursor to “split” and press
[OK] for confirmation.
The title is splitted into two titles at where you press [OK] during
4. Press [OK] to confirm your setting.
The title selected is erased.
playback.
5. When complete, the browser menu will be displayed.
6. To split more titles,
repeat from step 2 to
4. Or press [p] [q] to
select “EXIT” and
then press [OK] to exit
the setting.
5. To erase more titles, repeat from step 2 to 4. Or
press [p] [q] to select “EXIT” and then press
[OK] to exit the setting.
Note:
It’s not possible to split a
video title saved on a DVD+R disc.
Note:
You can NOT erase recorded title(s) on a DVD+R disc if the disc
is finalized.
Merging two titles into one (HDD and DVD+RW disc)
Setting a title thumbnail (HDD and DVD)
Use this function to merge two titles into one.
After merged, the new title can still be splitted again.
Normally the first picture of a recording is used as the index
picture. However, you can choose any picture from the recording
as the index picture.
1. Press [BROWSER] to display the “Browser” menu.
2. Press [t] [u] [p] [q] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
1. Press [BROWSER] to display the “Browser” menu.
2. Use [t] [u] [p] [q] to select the title you want to
edit and then press [EDIT] to go to the edit screen.
3. Press [p] [q] to select “Merge” and then press
[OK].
A menu shows all the titles applicable to this function, which
are titles with the same recording quality as the title selected,
will display.
3. Press [uPLAY] to start the title playback first.
Press [
the next chapter or the previous chapter.
Press [ F.F.] or [ REW ] to perform fast
NEXT] or [
PREVIOUS] to advance to
4. Press [t] [u] [p] [q] to select the title to merge
and then press [OK].
forward or fast rewind scanning.
Press repeatedly to play the title forward or reverse.
5. To merge more titles, repeat from step 2 to 4. Or
press [p] [q] to select “EXIT” and then press
[OK] to exit the setting.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT
6. To insert chapter marks in more titles, repeat from
step 2 to 5. Or press [p] [q] to select “EXIT”
and then press [OK] to exit the setting.
Note:
4. Press [p] [q] to select “Set Thumbnail.”
You can NOT insert chapter marks to recorded title(s) on a
DVD+R disc if the disc is finalized.
Erasing Chapter Mark
During playback you can set and erase chapter mark(s) within a
title.
1. Press [BROWSER] to display the “Browser” menu.
5. Press [OK] to select the image during playback
and set it as the video title thumbnail.
2. Press [t] [u] [p] [q] to select the title you want
to edit, and then press [EDIT] to go to the edit
screen.
6. To set thumbnails for more titles, repeat from step
2 to 5. Or press [p] [q] to select “EXIT” and then
press [OK] to exit the setting.
Note:
You can NOT set the thumbnail for the recorded title(s) on a
DVD+R disc if the disc is finalized.
3. Press [p] [q] to select “Erase Chapter.”
Inserting chapter mark
During playback you can set and erase chapter mark(s) within a
title.
4. Press [uPLAY] to start the title playback first.
Press [
the next chapter or the previous chapter.
Press [ F.F.] [ REW ] to perform fast
NEXT] [
PREVIOUS] to advance to
1. Press [BROWSER] to display the “Browser” menu.
forward or fast rewind scanning.
Press repeatedly to play the title forward or reverse.
2. Press [t] [u] [p] [q] to select the title you want
to edit, and then press [EDIT] to go to the edit
screen.
5. During playback you can press [OK] to erase
the chapter mark.
6. To erase chapter marks in more titles, repeat from
step 2 to 5. Or press [p] [q] to select “EXIT”
and then press [OK] to exit the setting.
Note:
1. You can NOT erase the chapter marks within recorded title(s)
on a DVD+R disc if the disc is finalized.
2. This function is not applicable to files without any chapter
marks.
3. Press [p] [q] to select “Insert Chapter Mark.”
4. Press [uPLAY] to start the title playback first.
Press [
the next chapter or the previous chapter.
Press [ F.F.] [ REW ] to perform fast
NEXT] [
PREVIOUS] to advance to
forward or fast rewind scanning.
Press repeatedly to play the title forward or reverse.
5. Press [OK] to insert chapter marks at where
you want to during playback.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
EDIT
Hiding Chapter
During playback you can set and hide chapters within a title.
1. Press [BROWSER] to display the “Browser” menu.
2. Press [t] [u] [p] [q] to select the title you want
to edit, and then press [EDIT] to go to the edit
screen.
3. Press [p] [q] to select “Hide Chapter.”
4. Press [uPLAY] to start the title playback first.
Press [
to the next chapter or the previous chapter.
Press [ F.F.] [ REW ] to perform fast
NEXT] [
PREVIOUS] to advance
forward or fast rewind scanning.
Press repeatedly to play the title forward or reverse.
5. During playback you can press [OK] to hide a
chapter.
6. To hide mores chapters, repeat from step 2 to 5.
Or press [p] [q] to select “EXIT” and then press
[OK] to exit the setting.
Note:
Note:
1. You can NOT hide chapters within recorded title(s) on a
DVD+R disc if the disc is finalized.
2. This function is not applicable to titles without chapter marks.
3. After performing this function, the chapters within the title are
hidden only during playback.
4. In Edit mode, a hidden chapter is displayed in a darker color.
A message “hidden” is also displayed at the left bottom corner of
the PIP.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DISK TOOLS
Erase
Finalize (make compatible)
Before you begin erasing any contents from a DVD+RW disc or
the HDD, please ensure that all important contents are safely
backed-up. All contents on the disc or HDD will be permanently
erased.
CAUTIONS:
For DVD+R disc:
Finalizing is necessary when you want to play discs recorded
with this unit on other DVD players or PCs with a DVD drive.
Once the disc has been finalized, you can not add recording(s) to
it or edit it.
Note:
Only DVD+RW discs and the HDD can be erased to create a
new format.
1. Press [Disk Tools] to display the “Disk Tools
Menu.”
Note:
For DVD+RW discs, finalizing is NOT required.
2. Press [p] [q] to select “Erase” and then press
1.Press [Disk Tools] to display the “Disk Tools Menu.”
[OK].
2. Press [p] [q] to select the “Finalize” icon and
then press [OK].
The finalization process will take place.
3. Press [p] [q] to select “DVD” or “HDD” and
press [OK]. Press [OK] to start erasing.
The erasing process will take place.
3. When complete, go to “EXIT” and press [OK].
4. When complete, go to “EXIT” and press [OK].
40
Download from Www.Somanuals.com. All Manuals Search And Download.
DISK TOOLS
CleanUp Disk (HDD only)
Defragment (HDD only)
1. Press [Disk Tools] to display the “Disk Tools
Menu.”
The “Defragment” process reorganizes the contents of the HDD
creating continuous blocks of available space.
2. Press [p] [q] to select the “CleanUp Disk,” and
1. Press [Disk Tools] to display the “Disk Tools
Menu.”
then press [OK].
2. Press [p] [q] to select “Defragment” and
then press [OK].
The defragment operation begins.
3. Press [p] [q] to select the “Delete Older Files,”
“Delete Larger Files,” “Delete Seldomly Played
Files,” “Delete Album” or “Delete All” and then
press [OK].
3. When the “Defragment” process is completed,
press [u] and [OK] to exit the “Disk Tools”
menu.
Note:
1. Contents of the HDD will not be lost during this process.
2. Frequent “defragment” operations are recommended to
improveperformance.
4. The cleanup process will take place.
5. When complete, move the highlighted cursor to
“EXIT” and press [OK] to exit.
Note:
The “Cleanup” operation will permanently delete the files being
selected.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
GUI OPERATION
Language
OSD
System
Video Output
Switch video output signal.
Component (Default)
Select a system operating language. The options are :
繁體中文,
English,
Español, Bahasa Malaysia
Français,
 ²Å 餤¤å,
Progressive
Menu Language
Clock Format
Select a menu operating language. The options are :
English, Traditional Chinese, Simplified Chinese,
French, Spanish, Malay
Select the clock format to set the system clock.
M/D/Y-12Hr
M/D/Y-24Hr
D/M/Y-12Hr
D/M/Y-24Hr
Y/M/D-12Hr
Y/M/D-24Hr
Audio Language
Select a audio operating language. The options are :
English, Traditional Chinese, Simplified Chinese,
French, Spanish, Malay
Date
Set the date of the system clock.
Subtitle Language
Time
Select a subtitle operating language. The options are :
English, Traditional Chinese, Simplified Chinese,
French, Spanish, Malay, Off
Set the time of the system clock.
HH:MM:SS
AM/PM
Auto-Sleep
Off/30/60/90/120mins (Default: Off)
Note:
“Auto sleep” sets how long the DVD recorder is switched to
“STANDBY” mode when no operation of the system is
detected (e.g. recording, playback, timer record or editing).
Restore
---- (Off)
Restore
Playback
Aspect Ratio
Settings of audio and video parameters when playing back.
16:9 Wide
4:3 Pan
4:3 L.Box (Default)
Parental
Set content control for supported DVD.
Set Level (Off , 1~8 )
The parental control levels are:
Audio
1: Kid Safe
4: PG-13
7: NC-17
2: G
5: PG-R
8: Adult
3: PG
6: R
Off
Digital Output
Settings of digital audio output.
PCM (Enable digital audio output with PCM data)
Password
Bit Stream (Enable digital audio output with encode
Set a system protect password. Password is needed for the
changing the setting.
data) (Default)
OLD Password (XXXX)
NEW Password (XXXX)
DTS Output
Confirm
(XXXX)
*(Default:0000)
Enable/Disable Digital Theater System output.
ON (Enable Digital Theater System mode)
Slide Time
Set the slide show interval while playing JPEG files.
Off 3~99 Seconds (Default: 5)
OFF (Disable Digital Theater System mode)
TV Audio
VCD PBC
Enable/Disable play back control for VCD and SVCD.
Stereo MAIN SAP (second audio program)
Mono
ON (Default) OFF
42
Download from Www.Somanuals.com. All Manuals Search And Download.
GUI OPERATION
Record
Record Quality
Set the default quality of recording.
M1
M3
M2
M4
M2x
M6
Chapter Mark
Set the interval of chapter auto-insertion while recording.
Off 5/10/15/20/25/30 mins
1) Press [SYSTEM MENU] to display the system menu.
2) Press [p] [q] to select “System,” “Language,”
“Playback,” “Record,” “Audio,” “TV Tuner” or “EXIT”
and press [u] or press [t] to return to preview layer.
3) Press [p] [q] to select the item and press [u] or [OK].
4) Press [p] [q] to set the option and press [OK].
To exit the SYSTEM menu
Press [SYSTEM MENU] or and press [t] until you return to the
main menu.
TV Tuner
TV Signal ---> Antenna or Cable or Auto
(Select the type of antenna input)
Country ---> Select your location
Utilities ---> scan channel or edit channel
(Select to start rescanning channel or edit a channel)
Fine Tune --> -24 ~ -1 0 +1 ~ +24
(Select to fine tune the channel frequency manually)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
DVD+RW
480i/480p
DVD+RW is a recordable and rewritable disc. DVD+RW use a
recording format that is comparable to a DVD-Video format.
Indicates the number of scanning lines and scanning format of
an image signal.
480i indicates 480 scanning lines with interlace format, and
480p indicates 480 scanning lines with progressive format.
Interlace output
NTSC, the video signal standard, has 480 interlaced (I) scan
lines, The Interlaced scanning system places lines of the
second half of the picture in-between lines of the first half of the
picture.
Aspect ratio
Aspect ratio refers to the length to height ratio of TV screens.
The ratio of a standard TV is 4:3, while the ratio of a high-
definition or wide TV is 16:9. The letter box allows you to enjoy
a picture with a wider perspective.
JPEG
A popular file format for still image compression and storage.
JPEG stands for “Joint Photographic Experts Group”. There are
two sub-types of the JPEG format as follows.
Bitstream
The digital form of multi-channel audio data (e.g., 5.1-channel)
before it is decoded into its various channels.
•
•
Baseline JPEG: used for digital cameras, the web, etc.
Lossless JPEG: an old type, rarely used now.
Chapter / Title
Linear PCM audio
Chapter is the smallest division and title is the largest division
on a DVD VIDEO. A chapter is a division of a title and similar to
a track for Video CD or Audio CD.
PCM stands for “Pulse Code Modulation”. Linear PCM is the
usual method for digitally encoding audio without compression,
and is used for the audio tracks on DVD VIDEO discs, Audio
CDs, etc.
Component video
Video signals with three channels of separate information that
makes up the picture. There are some types of component
video, such as R/G/B and Y/Cb(Pb)/Cr(Pr).
MP3
MP3 (MPEG1 audio layer 3) is a compressed audio file format.
Files are recognized by their file extension “.mp3” or “.MP3”.
Composite video
MPEG
A single video signal commonly used in most consumer video
products that contains all luminance, color, and synchronization
information.
MPEG stands for “Motion Picture Experts Group”. This is an
international standard for compression of moving images.
On some DVDs, digital audio has been compressed and
recorded in this format.
Dolby Digital®
A six-channel system consisting of left, center, right, left rear,
right rear and LFE (Low-Frequency Effect channel, for use with a
sub-woofer) channels. It requires a Dolby Digital® decoder,
either in the player or in an external receiver to regenerate the
sound. All processing is done in the digital domain.
Not all Dolby Digital discs contain six (5.1) channels of
information.
NTSC (National Television System Committee)
The initials stand for National Television Standards Committee.
This is the committee that established the standards for
television systems in the United States. The NTSC standard
broadcasts 525 or 480 lines of resolution per second, and 30
frames per second of refresh rate, 60 Hz field frequency. NTSC
TV system is widely used in USA, Canada, Latin America and
Taiwan etc.
DTS® (Digital Theater Systems)
DTS® stands for Digital Theater Systems. DTS® is a Digital
Surround audio encoding format configured with six (5.1)
channels, similar to Dolby Digital®. It requires a DTS® decoder,
either in the player or in an external receiver to regenerate the
sound. All processing is done in the digital domain.
Not all DTS discs contain six (5.1) channels of information.
PAL (Phase Alternation by Line)
PAL (Phase Alteration Line) is the color television broadcast
standard throughout the Western Europe (except in France,
where SECAM is the standard), Australia, China, Singapore and
Malaysia etc. It has 625 lines of vertical resolution per second
and 25 frames per second refresh rate, 50 Hz field frequency.
DVD-R
PBC
DVD-R is a recordable disc that is the same size as a DVD-
Video. Contents can be recorded only once to a DVD-R,and will
have the same format as a DVD-Video.
Playback Control. A special feature on a Video CD or Super
VCD that enables interactive use.
S-Video
DVD-RW
A video signal which improves picture quality over standard
composite connections. Used on Super VHS, DVD, high end TV
monitors, etc.
DVD-RW is a recordable and rewritable disc that is the same
size as a DVD-Video. DVD-RW has two different modes: VR
mode and Video mode.DVD created in video mode has the
same format as a DVD-Video ,while discs created in VR(Video
Recording)mode allow the contents to be programmed or edited
Track
SVCD, VCD, Audio CD discs use tracks to divide up the content
of a disc.
DVD+R
DVD+R is a recordable disc that is the same size as a DVD-
Video. Contents can be recorded only once to a DVD+R,and will
have the same format as a DVD-Video.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
DISC TYPES SUPPORTED (Read Only):
AUDIO RECORDING FORMAT
DVD-R/RW, DVD+R/RW, CD-R/RW
DVD+VR (M1/M2/M2x/M3/M4/M6 mode): Dolby Digital 2-channel
CONTENT FORMAT SUPPORTED :
1) DVD-Video
2) DVD+VR (DVD+VR format is compatible with DVD-Video in
AUDIO FORMAT Supported - Playback
most case)
3) Video CD
Analog output
Digital output
2channel
coaxial/optical
4) Super VCD
Format supported
LPCM/Dolby Digital/MPEG
5) Audio CD
6) MP3
Maximum number of files recognizable : 9999 files
Compression rate : between 32 kbps and 320 kbps
7) JPEG
Maximum number of pictures recognizable : 9999 files
8) BMP
AUDIOPERFORMANCE
DAConverter
ADConverter
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Channel Separation (1kHz)
24-bit/96KHZ
24-bit/96KHZ
³ 90dB
Maximum number of pictures recognizable : 9999 files
³ 80dB
³ 110dB
Total Harmonic Distortion (1kHz) £-65dB
RECORDABLEMEDIASUPPORTED:
1) DVD+R
2) DVD+RW
3) Built-in 80GB HDD
( DVD+VR Mode )
( DVD+VR Mode )
(DVD+VRmode)
TUNER
TVformat
PAL
CONNECTIONS
FRONT PANEL
Video Input
Audio L/R Input
IEEE 1394 Input
VIDEORECORDINGMODE
Mode
M1
DVD
1hr
HDD
16hr
32hr
43hr
48hr
64hr
96hr
RCA Connector (yellow) x1
RCA Connector (white/red) x1
Mini jack x1
M2
M2x
M3
M4
M6
2hrs
2.5hrs
3hrs
4hrs
6hrs
REARPANEL
Video Output
RCA Connector (yellow) x1
RCA Connector (white/red) x1
4-pin
RCA Connector (yellow) x1
RCA Connector (white/red) x1
4 pin
Audio L/R Output
S-Video Output
Video Input
Audio L/R Input
S-Video output
Component /
VIDEO RECORDING FORMAT
Y, Pb,Pr (Green/Blue/Red) x1
MPEG2: DVD+VR (M1/M2/M2x/M3/M4 mode)
MPEG1: DVD+VR (M6 mode)
Progressive Scan Output
DigitalAudio Output
Coaxial
Optical
x1
x1
VIDEOPERFORMANCE
VIDEOPERFORMANCE
DAConverter
Composite Output
S-Video Output
GENERAL
Power Supply
AC 100 ~ 240V
Approx. 50 W
+5°C to +40°C (+36°F to +104°F)
5% to 80% RH
430 x 66 x 316 mm
Approx. 4.3 kg
50/60Hz
10-bit / 54MHz
1 Vpp 75 Ohm
Power Consumption
OperatingTemperature
Operating Humidity
Dimensions(W/H/D):
Net Weight:
Y : 1 Vpp 75 Ohm
C : 0.3 Vpp 75 Ohm
Y : 1 Vpp 75 Ohm
Pb: 0.7 Vpp 75 Ohm
Pr : 0.7 Vpp 75 Ohm
Components Output
Notes:
The specifications and design of this product are subject to change
without notice.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|