Register your product and get support at
XL 660
To insert with
AUS EN Telephone
!
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1
Important
4
3.6
3.7
3.8
3.9
Setting the clock
14
15
15
15
16
1.1
1.2
Power requirements
4
What is standby mode?
Checking the signal strength
Missing handset(s)
Using GAP standard
compliance
5
5
6
6
1.3
1.4
1.5
1.6
Conformity
3.10 Menu structure
Environmental
Recycling & disposal
4
Call
17
17
17
18
18
18
18
4.1
4.2
4.3
4.4
4.5
4.6
Making a call
Ending a call
Answering a call
During a call
Using handsfree
Using quick dial
Electric, Magnetic and
Electromagnetic Fields ("EMF")
6
2
Your phone
8
8
9
2.1
2.2
2.3
2.4
2.5
What’s in the box
Overview of your phone
Overview of the base station 10
Display icons
The menus
11
11
5
Intercom and
Conference Calls
20
20
20
20
5.1
5.2
5.3
Calling another handset
Transferring a call
3
Getting started
12
12
12
12
13
13
3.1
3.2
3.3
3.4
3.5
Connect the base station
Connect your charger
Install your handset
Checking the battery level
Welcome mode
Making a conference call
6
Text and Numbers
22
6.1
Entering text and numbers
22
Table of contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
7
Phonebook
23 9.4
Deleting a redial record
Deleting all redial records
26
26
7.1
7.2
7.3
7.4
7.5
7.6
Viewing the phonebook
Calling from the phonebook
Adding a record
23
23
23
24
24
24
9.5
10
Custom Options
27
10.1 Personalizing your phone’s
display
27
Editing a record
10.2 Personalizing your phone’s
sounds
Deleting a record
Deleting all records
27
27
10.3 Auto conference
8
Call log
25
25
25
11
Advanced Settings
28
28
28
29
29
29
30
30
8.1
8.2
8.3
Viewing the call records
Returning a call
11.1 ECO mode
11.2 Registering handset(s)
11.3 Recall selection
11.4 Dial mode
Saving a call record to
your phonebook
25
25
25
8.4
8.5
Deleting a call record
Deleting all call records
11.5 Area code management
11.6 Carrier code
9
Redial List
26
26
26
11.7 Restoring default settings
9.1
9.2
9.3
Viewing the redial records
Redialing a call
Saving a redial record to
your phonebook
26
2
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Default (pre-programmed)
settings
31
32
13
14
Technical Data
Frequently asked
questions
33
35
15
Index
Table of contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
electrical storm. We recommend that
you unplug the product from the
power supply and telephone socket
during a storm.
Do not use the handset in an explosive
hazard area such as where there is gas
leaking.
It is recommended that this product is
not used near intensive care medical
equipment or by persons with
pacemakers.
This product can interfere with
electrical equipment such as answering
machines, television, radio, and
computers if placed too close. We
recommend that you position the base
station at least one meter from such
appliances.
1
Important
This product is not designed for making
emergency telephone calls when the
power fails. Alternative arrangements
should be made for access to emergency
services.
•
•
1.1
•
Power requirements
This product requires an electrical
supply of 100-240 volts, single-
phase alternating current, excluding
IT installations defined in standard
AS/NZS 60950.1.
The electrical network is classified as
dangerous according to criteria in the
standard AS/NZS 60950.1. The only
way to power down this product is by
unplugging the power supply from the
electrical outlet. Ensure the electrical
outlet is located close to the apparatus
and is always easily accessible.
•
•
•
Use only the mains adapter supplied
with this equipment. Incorrect adapter
polarity or voltage can seriously
damage the unit.
Base adapter:
•
The voltage on the network is classified
as TNV-3 (Telecommunication
Network Voltages, as defined in the
standard AS/NZS 60950.1). Following
a power cut, the call in progress, as well
as the date and time settings will be lost.
Philips S005CS0500050
Input: 100-240VAC/150mA, 50/60 Hz
Output: 5 VDC, 500mA
Charger adapter:
Philips S002CS0500021
Input: 100-240VAC/100mA, 50/60 Hz
Output: 5 VDC, 210mA
!
Warning
•
CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. Use only with
Philips, type no.: Multi-Life 600mAh
(2x 1.2V AAA 600mAh Ni-MH)
rechargeable battery. Use only the
recommended type supplied with this
product. Dispose of used batteries
according to the instructions.
•
•
Do not allow the handset to come into
contact with liquids or moisture.
Do not open the handset, base station
or charger. This could expose you to
high voltages.
Do not allow the charging contacts or
the battery to come into contact with
conductive materials.
•
•
There is a slight chance that your
product could be damaged by an
4
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Recommended type:
Warning
Philips 1.2V 600mAh AAA re-chargeable
batteries, Multi-Life 600mAh
Metallic objects may be retained if placed
near or on the handset receiver.
•
•
•
Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
1.2
Using GAP standard
compliance
The GAP standard guarantees that all
DECT™ GAP handsets and base stations
comply with a minimum operating
standard irrespective of their make.
XL660 handset and base station are GAP
compliant, which means they guarantee
the minimum functions: register a
handset, take the line, make a call and
receive a call. The advanced features may
not be available if you use them with
other makes.
•
•
To register and use XL660
handset with a GAP compliant base
station of different make, first follow the
procedure described in the
manufacturer’s instructions, then follow
the procedure described in this
manual for registering a handset.
To register a handset from different make
to XL660 base station, put the
•
•
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
•
Active mobile phones in the vicinity
may cause interference.
base station in registration mode, then
follow the procedure described in the
handset manufacturer’s instructions.
About operating and storage
temperatures:
•
•
•
Operate in a place where temperature
is always between 0 and 35º C.
Store in a place where temperature is
always between -20 and 45º C.
Battery life may be shortened in low
temperature conditions.
1.3
Conformity
We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
Important
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If you purchase a replacement
product, hand your complete old
product back to the retailer. The shop
should accept it as required by the
WEEE directive.
1.4
Environmental
Remember to observe local regulations
regarding the disposal of your packaging
materials, exhausted batteries and old
equipment. Promote their recycling
where possible.
Disposal instructions for batteries:
Batteries should not be
disposed of with general
household waste.
1.5
Recycling & disposal
Disposal instructions for old products:
The purpose of the WEEE directive
(Waste Electrical and Electronic
Packaging information:
Philips has marked the packaging with
standard symbols designed to promote
the recycling and appropriate disposal of
your eventual waste.
Equipment; 2002/96/EC) is to ensure that
products are recycled using the best
available treatment, recovery and recycling
techniques to ensure human health and
high environmental protection. Your
product is designed and manufactured with
high quality materials and components
which can be recycled and reused.
Do not dispose of your old product in
your general household waste bin.
Inform yourself about the local separate
collection system for electrical and
electronic products marked by this
symbol.
A financial contribution has been
paid to the associated national
recovery & recycling system.
The labelled packaging material is
recyclable.
1.6
Electric, Magnetic and
Electromagnetic Fields
("EMF")
1. Philips Royal Electronics
manufactures and sells many
consumer oriented products which
usually, as with any electronic
apparatus, have the ability to emit
and receive electro magnetic signals.
2. One of Philips' leading Business
Principles is to take all necessary
health and safety precautions for our
products, to comply with all
Use one of the following disposal options:
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
•
Dispose of the complete product
(including its cables, plugs and
accessories) in the designated WEEE
collection facilities.
3. Philips is committed to develop,
produce and market products that
cause no adverse health effects.
6
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
5. Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
Important
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Your phone
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
2.1
What’s in the box
Base station
Power supply
Handset
Battery door
Line Cord*
NiMH AAA Rechargeable
Batteries x 2
User Manual
Guarantee
Quick start
guide
Note
*The line adapter may not be attached to the line cord. You may find the line adapter
in the box. In this case, you have to connect the line adapter to the line cord first before
plugging the line cord to the line socket.
In multi-handset packs, you will find one or more additional handsets, chargers with
power supply units and additional rechargeable batteries.
8
Your phone
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2
Overview of your phone
E
F
Down key <
Scroll down menu
Decrease earpiece and loudspeaker
volume
Up key C
Scroll up menu
Increase earpiece and loudspeaker
volume
G
Talk / End key :
Make and receive calls
End call
H
I
Speaker key v
Turn speaker on / off
Phonebook key e
Enter phonebook
J
Star key *
Dial *
K
Intercom / Conference key 0
Dial 0
Make intercom call
Make conference call
L
Pause key #
Dial # and enter pause
A
B
Earpiece
M
Microphone
Memory keys MN
Quick dial your stored phone
numbers
C
D
Left Softkey (
Select the function displayed on the
handset screen directly above it.
Enter received calls and redial lists
Mute/unmute microphone
Right Softkey (
Select the function displayed on the
handset screen directly above it.
Access main menu
Exit menu / operation
Your phone
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4
Display icons
2.5
The menus
Your phone offers a variety of features
and functions grouped in the menus.
2.5.1 Browsing the menus
The main menu includes the Date & Time,
Ring Tones, Language, Key Beep and
Conference menus.
Each icon gives you a visual message of
what is happening on your handset.
From standby mode, you can,
•
Press the right softkey (MENU
Battery is fully charged
Battery is fully discharged
Call in progress
Voicemail indicator
Call log
to enter the main menu.
•
Press the left softkey (CALLS
to enter the received calls and redial
lists.
Press e to enter the phonebook.
Tip
•
Use C or < to navigate the
menus.
Tip
Exit to previous menu. Press the right
softkey )BACK to exit to the
previous menu. All unconfirmed changes
will not be saved.
Speaker on
Ringer off
Signal strength
ECO mode*
*When the ECO mode is activated, this
icon will replace the icon in the display.
Your phone
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2
Connect your charger
(For multi-pack models only)
Connect the AC power adapter to a
standard wall outlet.
3
Getting started
1
3.1
1
Connect the base station
Connect the power adapter jack to
the socket on the bottom of the
base station.
Connect the mains adapter to a
standard wall outlet.
Connect the telephone line cord to
the phone socket at the bottom of
the base station and the wall phone
socket.
2
3
3.3
!
Install your handset
Warning
CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. Use only with Philips,
type no.: Multi-Life 600mAh (2x 1.2V AAA
600mAh Ni-MH) rechargeable battery.
Use only the recommended type supplied
with this product. Dispose of used
batteries according to the instructions.
Note
Charge the handset(s) for 24 hours
before initial use!
The batteries are pre-installed in
your handset. Before charging,
remove the insulation foil by pulling
the tab off your handset.
1
12
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Place the handset on the base.
2
Battery full
Battery empty. Require
charging.
Your handset may power down shortly if
it is not charged after the battery is
empty. If you are on the phone when the
battery is nearly empty, you will hear
warning tones. Your call may be cut off
shortly after the warning.
3.5
Welcome mode
Before you first use your handset, you
may need to configure it according to the
country of use. After inserting the
batteries, Welcome appears in various
languages.
Note
Handset may get warm during initial
charging. This is normal. The handset may
take a few seconds to power up.
Press OK. You can now set the country to
start using the phone.
3.4
Checking the battery level
The battery icon displays the current
battery level.
Country
Default outgoing message
language
*Outgoing message language
available
Germany
Austria
Turkey
France
Switzerland
UK
German
German
Turkish
French
English
English
1 - German
2 - Turkish
3 - French
4 - Italian
5 - English
1 - English
Ireland
Italy
Italian
1 - Italian
Portugal
Greece
Spain
Portuguese
Greek
Spanish
2 - Portuguese
3 - Greek
4 - Spanish
5 - English
1 - Dutch
2 - French
3 - German
4 - English
Netherlands
Belgium
English
* By default, the outgoing message language 1 is displayed.
Getting started
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Country
Default outgoing message
language
*Outgoing message language
available
Sweden
Norway
Finland
English
1 - Swedish
2 - Norwegian
3 - Finnish
4 - Danish
5 - English
1 - Russian
2 - Ukrainian
3 - English
Denmark
Russia
Ukraine
English
English
Romania
Poland
1 - Romanian
2 - Polish
Czech
3 - Czech
Hungary
Slovakia
Slovenia
Croatia
4 - Hungarian
5 - English
Bulgaria
Serbia
Singapore
Indonesia
Malaysia
Australia
New Zealand
English
English
1 - English
1 - English
* By default, the outgoing message language 1 is displayed.
To re-configure your country setting, you
3.5.1 Setting your country
will need to reset your phone, see
“Default (pre-programmed) settings” on
page 31.
It is necessary to set the correct country
for the phone for it to work properly
according to your country's standards.
3.6
Setting the clock
After the welcome message,
Your phone has a digital clock. Set the
clock before initial use of the phone.
Select your country.
1
2
Press OK to confirm.
•
The country setting is saved.
3.6.1 Setting the date and time
After setting the country, you can set the
date and time (see next section). The
phone is now ready to use. If you wish to
set the date and time later, you can skip
Press MENU
.
1
2
Select DATE & TIME. Press OK to
enter SET DATE mode.
the setting by pressing BACK
.
Use the digit keys to enter the date.
3
14
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Press OK
.
Note
4
5
•
The handset displays the time
editing screen.
If your handset has lost link, you will not
be able to make or receive any calls. You
will also not be able to carry out many of
the phone's functions and features.
Use digit keys to enter the time.
Press the right softkey ( to
select AM or PM
.
Press OK
.
6
3.9
1
Missing handset(s)
•
The setting is saved.
Press _ on the base station.
•
All the handsets connected to this
base station ring.
3.7
What is standby mode?
Your phone is in standby mode when it is
idle. The standby screen displays the handset
name, the handset number, the signal icon,
and the battery icon.
Press _ on the base station again
2
to stop paging.
•
All the handsets stop ringing
OR
Press any key on the handset to stop
Note
the paging for all handsets (except if
you press SILENT, it will only stop
paging for that handset).
When the phone is idle for a few seconds,
the backlight of your phone will go off. If the
phone is left idle for the next 20 seconds, it
will switch to SCREENSAVER mode
displaying the time in digital clock format.
3.8
Checking the signal strength
displays the link status
The signal icon
between your handset and the base
station. A steady icon means your
handset and the base station are linked. A
flashing icon means your handset and the
base station are not linked.
If you move too far away from the base
station while you are on the phone, you
will hear warning tones notifying you that
your handset is almost out of range - lost
link. Take your handset closer to the base
station or your call may be cut off shortly
after the warning.
Getting started
15
Download from Www.Somanuals.com. All Manuals Search And Download.
3.10 Menu structure
The table below describes the menu tree of your phone. From standby mode, you can:
•
•
•
Press the right softkey (MENU to enter the main menu.
Press the left softkey (CALLS to enter the received calls and redial lists.
Press e to enter the phonebook.
Use the C or < keys to navigate within the menus and press left softkey
(OK to enter each option.
To exit the menu or operation, press the right softkey (BACK
.
MENU
DATE & TIME
RING TONES
CHOICE
Melody list
RING VOLUME
Language list
ON/OFF
OFF/LEVEL 1/LEVEL 2/
LEVEL 3/LEVEL 4/ LEVEL 5
LANGUAGE
KEY BEEP
CONFERENCE
ON/OFF
ADV. SETTING
ECO
ON/OFF
REGISTRATION
RECALL TIME
DIAL MODE*
AREA CODE*
CARRIER CODE*
RESET
SHORT/MEDIUM/LONG
TONE/PULSE
ON/OFF
CALLS
REDIAL LIST
Redial list
VIEW/SAVE NUMBER/
DELETE/DELETE ALL
RECEIVED CALLS
Phonebook list
Received calls list
VIEW/SAVE NUMBER/
DELETE/DELETE ALL
PHONEBOOK
MEMORY
ADD/VIEW/MODIFY/
DELETE/DELETEALL
*This menu item is country-dependent
16
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Press : to dial out the call.
Tip
2
4
Call
Note
Press CLEAR to erase a digit.
Press and hold # to enter a pause. P
displays on the screen.
Emergency Call. This telephone is not
designed for making emergency
4.1.2 Calling from the redial list
telephone calls when the power fails.
Alternative arrangements should be made
for access to emergency services.
Press CALLS
Select the record you want to call.
Press : to dial out the call.
1
2
3
4
.
4.1
Making a call
This section describes the different ways
to make a call.
4.1.3 Calling from the phonebook
For details on the phonebook, see
“Phonebook” on page 23.
Note
Signal Strength. Check the signal strength
before making a call and during a call. For
details, see “Checking the signal strength”
on page 15.
Press e to access the
1
2
3
phonebook.
Select the phonebook record you
want to call.
Press : to dial out the call.
Press :.
1
2
Dial the phone number. The number
displays on the screen and is dialed
out.
4.1.4 Calling from the call log
You can return a call from the incoming
(received or missed) call log. For details,
see “Call log” on page 25.
Note
Call Timer. The call timer displays the talk
time of your current call.
Press CALLS
Select RECEIVED CALLS. Press OK
Select the call record you want to
call.
.
1
2
3
Note
.
Low Battery. During a call, you will hear
warning tones if your handset is almost
out of battery. Charge your handset or
your call may soon be cut off. For details,
see “Checking the battery level” on
page 13.
Press : to dial out the call.
4
4.2
Ending a call
Press :.
Tip
1
4.1.1 Pre-dialing
Pre-dialing lets you view and edit the
number before making the call.
Auto hang up. Place the handset on the
base or charging cradle to end the call
automatically.
Enter the phone number. The
1
number displays on the screen. You
can make changes before dialing out.
Call
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3
Answering a call
4.4.2 Muting the microphone
The mute feature allows you to speak to
someone in the house privately.
When you receive a call, your phone rings
and the LED blinks. Press : to answer
the call.
Press MUTE during a call to mute
the microphone.
1
!
Warning
•
The caller cannot hear you, but you
can still hear his voice.
When the handset rings during an
incoming call, do not put the handset too
close to your ear as the ringer volume
may damage your hearing.
Press UNMUTE to un-mute the
microphone.
2
•
You can now communicate with the
caller.
Note
Caller ID Service. Subscribe from your
service provider.
4.5
Using handsfree
Tip
Press r to turn on/off the
1
Missed Call Alert. When a call is missed,
your handset displays a notification
message. The
speaker.
Note
icon flashes.
Handsfree. Handsfree activation can
suddenly increase the earpiece volume to
a very high level. Make sure the handset is
not too close to your ear.
4.3.1 Turning off the ringer
You can turn off the ringer for all
incoming calls.
For details on the ringer setting, see
“Personalizing your phone’s sounds”
on page 27.
1
4.6
Using quick dial
You can store up to 2 direct access
memories in your phone. A long press on
the keys M or N will store
the number displayed on the phone as
your quick dial number.
Tip
Silent Ringer. When the phone is ringing,
press SILENT to turn off the ringer for
the current call.
Note
Replace memory. If the selected memory
is already assigned with a number, a
confirmation message will be displayed
when you attempt to store a new
number. Press YES to replace the current
memory with the new number.
4.4
During a call
This section describes the features that
are available during a call.
4.4.1 Adjusting the earpiece or
loudspeaker volume
Press C or < to adjust the
1
volume during a call.
•
The volume is adjusted and the
phone goes back to the call screen.
18
Call
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6.1 Viewing quick dial number
Press M or N.
1
•
The stored number is displayed.
Note
Press : to dial out the viewing number.
4.6.2 Calling from quick dial
Press :.
1
2
Press Mor Nto dial out
the call.
Call
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Select or press the desired handset
number. Press OK
Wait for the called handset to
answer your call.
2
3
.
5
Intercom and
Conference Calls
5.1.2 To toggle between the calls
An intercom call is a call to another
handset that shares the same base station.
A conference call involves a conversation
between another handset and outside
caller(s).
Press 0 to switch between the
1
outside call and the intercom call.
5.2
1
2
Transferring a call
Press and hold 0 during a call.
Select or press the desired handset
5.1
Calling another handset
Note
number. Press OK
.
Press : after the called handset
3
If the base station only has 2 handsets
(yours and another handset) registered to
it, you can press 0 to call the other
handset instantly.
answers your call.
•
The outside call is now transferred
to the other handset.
Press and hold 0 for more than 2
seconds. The handset(s) available for
intercom is displayed.
1
5.3
Making a conference call
A 3-way conference call is a call between
you, outside caller(s), and another
handset user in your house.
Select or press the desired handset
2
number. Press OK
The desired handset rings.
Press : on the desired handset.
The intercom is established.
.
Note
•
A 3-way conference call requires 2
handsets that share the same base station.
3
4
•
Press : to cancel or end the
During an external call,
intercom call.
Press and hold 0 for more than 2
seconds to initiate an internal call.
The handset(s) available for
intercom is displayed.
1
Note
You will hear busy tone if the handset you
are calling is not available.
•
The external caller is automatically
being placed on hold.
5.1.1 While you are on the phone
While talking on the phone, you can call
another handset.
Select or press the desired handset
number. Press OK
Your desired handset rings.
2
3
.
Press and hold 0 for more than 2
1
•
seconds during the call.
Press : on the desired handset.
•
The external caller is automatically
being put on hold.
•
The intercom is established.
20
Intercom and Conference Calls
Download from Www.Somanuals.com. All Manuals Search And Download.
Press CONF to enter conference
mode.
4
5
•
You are now on a 3-way conference
call with the external call and the
desired handset.
Press INT to end the conference call
and return to intercom mode.
Tip
Auto Conference. You can join an ongoing
external call with another handset by
pressing :. See “Auto conference” on
page 27.
During the conference call,
Press INT to put the external call on
hold and go back to the internal call.
1
•
The external call is put on hold
automatically.
Note
Any handset hangs up during a
conference call will leave the other
handset still in connection with the
external call.
Intercom and Conference Calls
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Example to write "PAUL
"
Press
Press
Press
Press
7
2
8
5
once:
once:
two times:
three times:
P
A
U
L
6
Text and Numbers
You can enter text and numbers for
handset name, phonebook records, and
other menu items.
6.1
1
Entering text and numbers
Find the key with the character you
want.
Press it as many times as needed for
the character you want.
2
Tip
Editing. Use CLEAR to delete and C
or < to move the cursor.
Input table
Key Characters (Upper case)
0
1
2
. 0 , / : ; " ' ! ¡ ? ¿ * + - %
\ ^ ~ |
Space 1 @ _ # = < > ( )
& € £ $ ¥ [ ] { } ¤ § …
A B C 2 À Â Æ Á Ã Ă Ä Å Ą
Ç Ć Č
3
4
5
6
7
8
9
D E F 3 Ď Đ Ě È É Ê Ë Ę ∆ Φ
G H I 4 Ğ Í Ì Î Ï İ Γ
J K L 5 Λ Ł Ĺ Ľ
M N O 6 Ñ Ň Ń Ó Ô Õ Ö Ő
P Q R S 7 Ř Ş Š Ś β Π Θ Σ
T U V 8 Ţ Ť Ù Ú Û Ü Ů
Ű
W X Y Z 9 Ý Ž
Ż
Ø Ω
Ξ Ψ
22
Text and Numbers
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1.2 During a call
7
Phonebook
You can access the phonebook and view
your records during a call.
Your phone has a phonebook that can
store up to 100 records. You can access
the phonebook from your handset. Each
record can have a name up to 14
characters long and a number up to 24
digits long.
Press e during a call
1
2
Select the contact you want to view.
7.2
Calling from the phonebook
See “Calling from the phonebook” on
page 17.
7.1
Viewing the phonebook
Note
7.3
Adding a record
Note
Only one handset can view the
phonebook at one time.
1
2
Memory Full. If your phonebook is full, the
handset displays a notification message.
Delete some records before adding new
ones.
Press e.
Select the contact you want to view.
Tip
Press e.
1
2
Options Menu. While viewing the
phonebook, you can press OPTION to
access the phonebook options menu.
Press OPTION. Select ADD. Press
OK.
Note
Text and Number Editing. See “Text and
Numbers” on page 22.
7.1.1 Searching a record
You can search the phonebook by
scrolling or by searching the first
character.
Enter the name. Press OK
Enter the number.
.
3
4
Note
Duplicate Record. Contacts with identical
7.1.1.1
Searching by scrolling
number cannot be saved.
While in the phonebook, press
C or < to scroll.
1
Tip
Pause. Press and hold # to insert a
pause.
Press SAVE to confirm.
Your new record is saved.
5
7.1.1.2
Searching by the first
character
•
While in the phonebook, press the
digit key that contains the character
you want to search by.
1
Phonebook
23
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4
1
2
Editing a record
Press e.
Select the contact you want to edit.
Press OPTION. Select MODIFY
.
Press OK
.
Edit the name if necessary. Press OK
Edit the number if necessary. Press
SAVE to confirm.
.
3
4
•
The record is saved.
7.5
1
2
Deleting a record
Press e.
Select the contact you want to
delete. Press OPTION. Select
DELETE. Press OK
.
•
The record is deleted.
7.6
1
2
Deleting all records
Press e.
Press OPTION. Select DELETE ALL
.
Press OK
.
•
The handset displays a confirmation
request.
Press OK to confirm.
All records are deleted.
3
•
24
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2
Returning a call
8
Call log
To call from the incoming call log, see
“Calling from the call log” on page 17.
The call log stores the call history of all
incoming (missed or received) calls. The
incoming call history includes the caller
name, number, call time and date. This
feature is available if you have registered
to the Caller ID service (CLI) with your
service provider.
8.3
Saving a call record to your
phonebook
Enter the RECEIVED CALLS list.
Select the record you want while
1
2
browsing the log. Press OPTION
Select SAVE NUMBER. Press OK
Enter and edit the name if necessary.
Press OK
Enter and edit the number if
necessary. Press SAVE
The record is saved.
.
.
3
4
Your phone can store up to 20 call
.
records. The call log icon
will blink to
5
remind you of any unanswered received
calls. If the identity of the caller is not
withheld, the name (or number) of the
caller will be displayed. The call records
are displayed in chronological order with
the most recent received call at the top of
the list.
.
•
8.4
1
2
Deleting a call record
Enter the RECEIVED CALLS list.
Select the record you want while
browsing the log. Press OPTION
Select DELETE. Press OK
The record is deleted.
.
Note
.
3
Call back from the call list may not work
for all received numbers if the received
number is not a valid number (e.g.
Private).
•
8.5
1
2
Deleting all call records
Enter the RECEIVED CALLS list.
Press OPTION to enter the options
8.1
1
Viewing the call records
Press VIEW. (or press CALLS if all
calls have already been viewed
before)
menu while browsing the log.
Select DELETE ALL. Press OK
The handset displays a confirmation
request.
Press OK to confirm.
All records are deleted.
.
3
4
•
Select RECEIVED CALLS, and then
press OK to enter the incoming call
log.
Select the record you want to view.
Press OPTION. Select VIEW. Press
2
3
•
OK.
Call log
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Select DELETE. Press OK
.
3
•
The record is deleted.
9
Redial List
9.5
1
2
Deleting all redial records
Enter the REDIAL LIST
Press OPTION to enter the options
The redial list stores call history of dialed
calls. The dialed call history includes the
name and number called. Your phone can
store up to 10 redial records.
.
menu while browsing the list.
Select DELETE ALL. Press OK
The handset displays a confirmation
request.
Press OK to confirm.
All records are deleted.
.
3
4
•
9.1
1
2
Viewing the redial records
Press CALLS
.
Select REDIAL LIST, and then press
OK to enter the redial list.
•
Select the record you want to view.
Press OPTION. Select VIEW. Press
3
OK.
9.2
Redialing a call
To call from the redial list, see “Calling
from the redial list” on page 17.
9.3
Saving a redial record to your
phonebook
Enter the REDIAL LIST
Select the record you want while
browsing the list. Press OPTION
Select SAVE NUMBER. Press OK
Enter and edit the name if necessary.
Press OK
Enter and edit the number if
necessary. Press SAVE
The record is saved.
.
1
2
.
.
3
4
.
5
.
•
9.4
1
2
Deleting a redial record
Enter the REDIAL LIST
Select the record you want while
browsing the list. Press OPTION
.
.
26
Redial List
Download from Www.Somanuals.com. All Manuals Search And Download.
10.2.2 Setting your handset's
ringer volume
There are 6 ringer volume levels
(including ringer off).
10 Custom Options
Make this your phone - change the look
and sound of the handset to suit your
needs and preference.
Press MENU
Select RING TONES
VOLUME. Press OK
Select the new setting. Press OK
The setting is saved.
.
1
2
>
RING
.
10.1 Personalizing your phone’s
display
.
3
•
10.1.1 Setting the display language
This feature only applies to model(s) with
multiple-language support.
10.2.3 Setting the key tone
Key tone is the sound you hear when you
press a key on your handset.
Press MENU
Select KEY BEEP. Press OK
Select the new setting. Press OK
The setting is saved.
.
Note
1
2
3
.
Available languages for selection vary with
different countries.
.
•
Press MENU
Select LANGUAGE. Press OK
Select the new setting. Press OK
The setting is saved.
.
1
2
3
.
.
10.3 Auto conference
•
Auto conference lets you join an external
call with another handset by simply
pressing :.
10.2 Personalizing your phone’s
sounds
10.3.1 Activating/Deactivating
auto conference
10.2.1 Setting your handset's
ringer melody
You can choose from 10 polyphonic ring
melodies and 5 standard ring melodies.
Press MENU
Select CONFERENCE. Press OK
Select the new setting. Press OK
The setting is saved.
.
1
2
3
.
.
•
Press MENU
Select RING TONES
Press OK
Select the new setting. Press OK
The setting is saved.
.
1
2
>
CHOICE.
.
.
3
•
Custom Options
27
Download from Www.Somanuals.com. All Manuals Search And Download.
11.2.1 Auto registration
11 Advanced Settings
Place the handset on the base station.
The handset will detect the base and
start to register automatically.
1
Discover and explore the additional
settings your phone offers! Find out how
these features can benefit you and help
you make the most of your phone.
•
Registration shall be completed in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
11.1 ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
11.2.2 Manual registration
If the base station is of a different make
from XL660, the handset and base linking
may not be achieved during auto
registration mode. Follow the
Press MENU
Select ADV. SETTING
press OK to confirm.
.
1
2
>
ECO, then
Select the new setting, then press OK
to confirm.
3
instructions below to register your
handset manually to the base station.
•
•
The setting is saved.
is displayed instead of
standby mode.
Press MENU
Select ADV. SETTING
REGISTRATION. Press OK
The display shows PRESS PAGE
KEY FOR 5 SEC
Press OK to continue.
On the base station, press and hold
_ for approximately 5 seconds.
Enter the system PIN (Pre-set: 0000).
Use CLEAR to make corrections.
Press OK to confirm the PIN.
.
1
2
in
>
.
•
Note
.
When the ECO mode is activated, the
connection range between the handset
and the base station can be reduced.
3
4
5
6
11.2 Registering handset(s)
The procedures described below are the
procedures you will find in your handset.
The procedures may vary according to
the handset you want to register. In this
case, refer to the manufacturer's
instruction of the additional handset.
Additional handsets must be registered to
the base station before you can use them.
Your base station can register up to 5
handsets. The system PIN may be
required for registering or unregistering
handsets.
•
Registration shall be completed in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
Note
If the PIN is incorrect or no base is found
within a certain period, your handset
displays a notification message. Repeat
the above procedure if registration failed.
Note
The pre-set system PIN code is 0000 and
it cannot be changed.
Advanced Settings
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
11.3 Recall selection
Temporary Tone. If your phone is in pulse
dialing, press and hold *during a call for
temporary tone mode. 'd' displays. Digits
entered after 'd' are sent out as tone
signals (for this call only).
Recall is a signal that needs to be sent to
the network when making or answering a
second call. Your phone shall already be
set up for use in your country. For details,
consult your service provider.
11.5 Area code management
This feature only applies to model(s) with
area code support.
This feature automatically removes the
area code of an incoming call. You can
define an area code (up to 5 digits) you
want to remove. The phone number will
be saved in the call log without the area
code.
11.3.1 Setting the recall duration
There are 3 recall time options: Short,
Medium, and Long. The number of
available options varies with different
countries.
Press MENU
Select ADV. SETTING
TIME. Press OK
Select the new setting. Press OK
The setting is saved.
.
1
2
>
RECALL
.
.
3
•
11.5.1 Activating area code
removal
11.4 Dial mode
Press MENU
Select ADV. SETTING
CODE. Press OK
Enter the area code. Press OK
The setting is saved.
.
1
2
This feature only applies to model(s) that
support both tone and pulse dialing.
Dial mode is the telephone signal used in
your country. Your phone supports tone
(DTMF) and pulse (rotary) dialing. Your
phone shall already be set up for use in
your country. For details, consult your
service provider.
>
AREA
.
.
3
•
11.5.2 Deactivating area code
removal
Press MENU
Select ADV. SETTING
CODE. Press OK
Use CLEAR to delete all the digits.
Press OK
The setting is saved.
.
1
2
>
AREA
11.4.1 Setting the dial mode
.
Press MENU
Select ADV. SETTING
MODE. Press OK
Select the new setting. Press OK
The setting is saved.
.
1
2
3
>
DIAL
.
.
•
.
3
•
Advanced Settings
29
Download from Www.Somanuals.com. All Manuals Search And Download.
11.6 Carrier code
This feature only applies to model(s) with
carrier code support.
11.7 Restoring default settings
You can reset your phone settings to the
original factory settings.
For some telephone service providers,
you may need to add the carrier code
when making a call outside of your local
area. This feature automatically helps you
decide if the carrier code is needed when
you are returning a call from the incoming
call log.
You only have to program the carrier
code of your service provider, and your
phone will do the rest for you.
Press MENU
Select ADV. SETTING
Press OK
.
1
2
>
RESET.
.
•
The handset displays a confirmation
request.
Press OK to confirm.
All settings have been reset.
Note
3
•
After reset, your handset's power
switches off. It will switch back on in a few
seconds after updating all the settings. All
handsets return to the Welcome screen
after reset.
Note
Carrier Code. It is a 2 or 3-digit code that
represents a service provider. Consult
your service provider to find out its code.
To see a list of default setting, see
“Default (pre-programmed) settings” on
page 31.
11.6.1 Activating carrier code
Press MENU
Select ADV. SETTING
CODE. Press OK
.
1
2
>
CARRIER
.
Enter the carrier code. Press OK
.
3
•
The setting is saved.
11.6.2 Deactivating carrier code
Press MENU
Select ADV. SETTING
CODE. Press OK
Use CLEAR to delete all the digits.
Press OK
The setting is saved.
.
1
2
>
CARRIER
.
3
.
•
30
Advanced Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Default (pre-programmed) settings
Language
Country
dependent
Handset Name
Date
PHILIPS
01/01/09
MM/DD
00:00
Date Format
Time
Time Format
Phonebook List
Auto Hang Up
Recall Time
12-hour
Unchanged
On
Country
dependent
Area Code
[Empty]
[Empty]
Level 3
Carrier Code
Handset Speaker
Volume
Conference
Country
dependent
Receiver Volume Volume 3
Handset Ring
Volume
Level 3
Handset Ring
Melody
Melody 1
Handset Key Beep On
Incoming Call Log [Empty]
Redial List
[Empty]
Dial Mode*
Country
dependent
* Country dependent features
Default (pre-programmed) settings
31
Download from Www.Somanuals.com. All Manuals Search And Download.
13 Technical Data
Relative humidity
Display
•
Operation: Up to 95% at 40°C
•
White LCD backlight
•
Storage: Up to 95% at 40°C
General telephone features
•
•
Dual mode caller name & number
identification
10 polyphonic ring melodies and 5
standard ring melodies
Conference call and voicemails
Intercom
•
•
Phonebook list, Redial list and Call log
•
•
•
Phonebook list with 100 entries
Redial list with 10 entries
Call log with 20 entries
Battery
2 x AAA NiMH Rechargeable
600mAh batteries
•
Power consumption
•
Power consumption at idle mode:
around 600mW
Weight and dimensions
•
Handset: 138.4 grams
174.0 x 56.3 x 30.0 mm (H x D x W)
Base: 103.7 grams
•
100.5 x 99.5 x 72.5 mm (H x D x W)
Temperature range
•
Operation: 0°C to +35°C (32°F to
95°F).
•
Storage: -20°C to +45°C (-4°F to
113°F).
32
Technical Data
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Frequently asked
questions
In this chapter, you will find the most
frequently asked questions and answers
about your phone.
Product behaviour
Connection
Signal icon flashing
I cannot change the settings of my
voice mail
•
The handset may be out of range.
•
Operator voice mail is managed by
your operator and not the phone
itself. Please contact your operator
should you want to change the
settings.
Move closer.
•
If the handset displays REGISTER
YOUR HANDSET, register the
handset. See page 28.
Set-up
Handset on the charger does not
charge
Registration fails continuously
•
Your base memory may be full. Delete
an un-used handset and try again. See
page 28.
•
Check that the batteries are inserted
correctly.
•
Make sure the handset is placed
properly on the charger. The battery
icon animates while charging.
Batteries may be defective. Purchase
new ones from your dealer.
Sound
•
No dialing tone
•
•
Check your phone connections.
The handset may be out of range.
Move closer.
No display
•
•
Check that the batteries are charged.
Check the power and phone
connections.
No parking tone
•
The handset may not be placed
properly on the cradle. Try again.
Charging contacts may be dirty.
Disconnect the power supply first and
then clean contacts with a damp cloth.
Bad audio (crackles, echo, etc.)
•
•
The handset may be nearly out of
range. Move closer to the base.
The phone may be receiving
interference from nearby electrical
appliances. Move the base.
•
Frequently asked questions
33
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The phone may be at a location with
thick walls. Move the base.
Handset does not ring
•
Check that the handset ringer is
turned on. See page 27.
Caller ID does not display
•
Service may not be activated. Check
with your service provider.
•
The caller's information may be
withheld or is unavailable.
Cannot make / answer a 2nd call
•
Service may not be activated. Check
with your service provider.
Check that the recall selection is
correct. See page 29.
•
The handset loses connection with
the base or the sound is distorted
during a call
•
Check if the ECO mode is activated.
Turn it off to increase the handset
range and enjoy the optimal call
conditions.
Note
If the above solutions do not help,
remove the power from both the handset
and the base. Wait for 1 minute and try
again.
34
Frequently asked questions
Download from Www.Somanuals.com. All Manuals Search And Download.
15 Index
H
A
Handset locator 15
Handsfree 18
Accessories 8
Advanced Settings 28
Answering a call 18
Area code 29
Auto conference 27
Auto prefix 29
I
Intercom 20
K
C
Key tone 27
Call 17
Call barring 29
Call log 25
M
Making a call 17
Calling from the call log 17
Calling from the phonebook 17, 23
Carrier code 30
Clock and alarm 23
Conference Calls 20
Conformity 5
Making a conference call 20
Menu structure 16
Muting the microphone 18
O
Overview of the base 10
Overview of the handset 9
Connect the base station 12
Country setting 14
P
D
Personalizing your phone’s display 27
Personalizing your phone’s sounds 27
Phonebook 23
Default settings 31
Deleting a record 24
Deleting all records 24
Dial mode 29
Power requirements 4
Pre-dialing 17
Display icons 11
Display language 27
R
Recall selection 29
Recycling & disposal 6
Redial List 26
E
Ending a call 17
Entering text and numbers 22
Redialing a call 26
Registering handset 28
Restoring default settings 30
Ringer melody 27
F
Frequently asked questions 33
Ringer volume 27
Index
35
Download from Www.Somanuals.com. All Manuals Search And Download.
S
Setting the clock 14
T
Transferring a call 20
W
Wall mounting 12
36
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
UFZZ01236JZ(0)
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2008 Koninklijke Philips Electronics N.V.
All rights reserved
Reproduction in whole or in part is prohibited without the
written consent of the copyright owner
Document number: 01236JZ(0)
P r i n t e d i n V i e t n a m
Download from Www.Somanuals.com. All Manuals Search And Download.
|